TY - THES A1 - Hecht, Markus T1 - Liquid-Crystalline Perylene Bisimide and Diketopyrrolopyrrole Assemblies T1 - Flüssigkristalline Perylenbisimid- und Diketopyrrolopyrrolstrukturen N2 - The research presented in this thesis illustrates that self-assembly of organic molecules guided by intermolecular forces is a versatile bottom-up approach towards functional materials. Through the specific design of the monomers, supramolecular architectures with distinct spatial arrangement of the individual building blocks can be realized. Particularly intriguing materials can be achieved when applying the supramolecular approach to molecules forming liquid-crystalline phases as these arrange in ordered, yet mobile structures. Therefore, they exhibit anisotropic properties on a macroscopic level. It is pivotal to precisely control the interchromophoric arrangement as functions originate in the complex structures that are formed upon self-assembly. Consequently, the aim of this thesis was the synthesis and characterization of liquid-crystalline phases with defined supramolecular arrangements as well as the investigation of the structure-property relationship. For this purpose, perylene bisimide and diketopyrrolopyrrole chromophores were used as they constitute ideal building blocks towards functional supramolecular materials due to their thermal stability, lightfastness, as well as excellent optical and electronic features desirable for the application in, e.g., organic electronics. N2 - Mithilfe von Gestaltungsprinzipien der supramolekularen Chemie können komplexe Strukturen realisiert werden, die mit Ansätzen der kovalenten Chemie nicht erreichbar sind. Ein zentraler Aspekt ist hierbei der systematische Aufbau der Monomereinheiten, welche unter geeigneten Bedingungen über intermolekulare Wechselwirkungen selbstassemblieren und Architekturen mit spezifischer räumlicher Anordnung der einzelnen Bauelemente formen. Flüssigkristalline Materialien zeigen zusätzlich zu positioneller und Orientierungsfernordnung der Moleküle, welche anisotrope Eigenschaften auf makroskopischer Ebene erzeugen, eine gewisse Mobilität. Daher können durch Kombination des supramolekularen Ansatzes mit Flüssigkristallen besonders interessante Materialien erzeugt werden. Da die spezische Anordnung der Moleküle die Funktion des selbstassemblierten Materials stark beeinflusst, ist es von großer Bedeutung, diese exakt kontrollieren zu können. Daher war es Ziel dieser Arbeit, flüssigkristalline Phasen mit einer definierten supramolekularen Struktur zu synthetisieren und zu charakterisieren. Weiterhin war es ein Ziel, diese auf ihre funktionellen Eigenschaften zu untersuchen, die aus der spezifischen Anordnung der Monomereinheiten hervorgehen. Für diesen Zweck wurden Perylenbisimid- und Diketopyrrolopyrrolfarbstoffe als Baueinheiten verwendet, da diese aufgrund ihrer Licht- und Hitzestabilität sowie exzellenten optischen und elektronischen Eigenschaften ideale Materialien für die Anwendung in der organischen Elektronik darstellen. KW - Selbstorganisation KW - Flüssigkristall KW - Perylenderivate KW - Perylene Bisimide KW - Liquid Crystal KW - J-Aggregates KW - Photoconductivity KW - Self-Assembly KW - Perylenbisimid Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-216987 ER - TY - THES A1 - Shen, Chia-An T1 - Dicyanomethylene Squaraines: Aggregation and G-Quadruplex Complexation T1 - Dicyanomethylen-Squaraine: Aggregation und G-Quadruplex-Komplexierung N2 - Squaraine dyes have attracted more attention in the past decade due to their strong and narrow absorption and fluorescence along with the easily functionalized molecular structure. One successful approach of core functionalization is to replace one oxygen of the squaric carbonyl group with a dicyanomethylene group, which shifts the absorption and emission into the near infrared (NIR) region and at the same time leads to a rigid, planar structure with C2v symmetry. However, such squaraines tend to aggregate cofacially in solution due to dispersion forces and dipole-dipole interactions, usually leading to H-type exciton coupling with undesired blue-shifted spectrum and quenched fluorescence. Therefore, the goal of my research was the design of dicyanomethylene-substituted squaraine dyes that self-assemble into extended aggregates in solution with J-type coupling, in order to retain or even enhance their outstanding optical properties. Toward this goal, bis(squaraine) dyes were envisioned with two squaraine units covalently linked to trigger a slip-stacked packing motif within the aggregates to enable J-type coupling. In my first project, bis(squaraine) dye BisSQ1 was synthesized, in which two dicyanomethylene squaraine chromophores are covalently linked. Concentration and temperature-dependent UV/Vis/NIR spectroscopy experiments reveal that BisSQ1 undergoes cooperative self-assembly resulting in J-type aggregates in a solvent mixture of toluene/1,1,2,2-tetrachloroethane (TCE) (98:2, v/v). The J type exciton coupling is evident from the significantly red shifted absorption maximum at 886 nm and the fluorescence peak at 904 nm. In conclusion, this was a first example to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by simply connecting two dyes in a head-to-tail bis chromophore structure. Connecting two squaraine dyes with an additional phenylene spacer (BisSQ2) leads to two different polymorphs with very distinct absorption spectra upon cooling down a solution of BisSQ2 in a solvent mixture of toluene/TCE (98:2, v/v) with different rates. Accordingly, rapid cooling resulted in rigid helical nanorods with an absorption spectrum showing a panchromatic feature, while slow cooling led to a sheet-like structure with a significant bathochromic shift in the absorption spectrum. It was discovered that the conventional molecular exciton model failed to explain the panchromatic absorption features of the nanorods for the given packing arrangement, therefore more profound theoretical investigations based on the Essential States Model (ESM) were applied to unveil the importance of intermolecular charge transfer (ICT) to adequately describe the panchromatic absorption spectrum. Moreover, the red-shift observed in the spectrum for the sheet-like structure can be assigned to the interplay of Coulomb coupling and ICT-mediated coupling. Furthermore, the same bis-chromophore strategy was adopted for constructing an NIR-II emitter with a bathochromically-shifted spectrum. In chloroform, BisSQ3 exhibits an absorption maximum at 961 nm with a significant bathochromic shift (1020 cm−1) compared to the reference mono-squaraine SQ, indicating intramolecular J-type coupling via head-to-tail arrangement of two squaraine dyes. Moreover, BisSQ3 shows a fluorescence peak at 971 nm with a decent quantum yield of 0.33%. In less polar toluene, BisSQ3 self-assembles into nanofibers with additional intermolecular J-type coupling, causing a pronounced bathochromic shift with absorption maximum at 1095 nm and a fluorescence peak at 1116 nm. Thus, connecting two quinoline-based squaraines in a head-to-tail fashion leads to not only intra-, but also intermolecular J-type exciton coupling, which serves as a promising strategy to shift the absorption and emission of organic fluorophores into the NIR-II window while retaining decent quantum yields. In conclusion, my research illustrates based on squaraine dyes how a simple modification of the molecular structure can significantly affect the aggregation behavior and further alter the optical properties of dye aggregates. Elongated supramolecular structures based on dicyanomethylene substituted squaraine dyes were successfully established by covalently linking two squaraine units to form a bis-chromophore structure. Then, a simple but efficient general approach was established to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by directly connecting two squaraine dyes in a head-to-tail fashion without spacer units. Moreover, the additional spacer between the squaraine dyes in BisSQ2 allowed different molecular conformations, which leads to two different morphologies depending on the cooling rates for a hot solution. Hence, this is a promising strategy to realize supramolecular polymorphism. In general, it is expected that the concept of constructing J-aggregates by the bis-chromophore approach can be extended to entirely different classes of dyes since J-aggregates possess a variety of features such as spectral shifts into the NIR window, fluorescence enhancement, and light harvesting, which are commonly observed and utilized for numerous fundamental studies and applications. Moreover, the insights on short-range charge transfer coupling for squaraine dyes is considered of relevance for all materials based on alternating donor-acceptor π-systems. The panchromatic spectral feature is in particular crucial for acceptor-donor-acceptor (ADA) dyes, which are currently considered as very promising materials for the development of bulk heterojunction solar cells. N2 - Squarainfarbstoffe haben in den letzten Jahren aufgrund ihrer hervorragenden optischen Eigenschaften, zu denen ein Cyanin-ähnliches Absorptions- und Fluoreszenzverhalten zählt, in Kombination mit einer leicht funktionalisierbaren Molekülstruktur immer mehr Aufmerksamkeit auf sich gezogen.22 Ein erfolgreicher Ansatz der Kernfunktionalisierung besteht darin, ein Sauerstoffatom der Quadratsäure-Carbonylgruppe durch eine Dicyanomethyleneinheit zu ersetzen, was die Absorption und Emission in den nahen infraroten (NIR-) Bereich verschiebt und gleichzeitig zu einer starren planaren Struktur mit C2v Symmetrie und einem Grundzustandsdipolmoment führt.27 Diese Eigenschaften haben sich als vorteilhaft für die π-π-Aggregation von diesen Squarainen auf G-Quadruplex (G4) Strukturen erwiesen, wie in Kapitel 6 beschrieben. Solche Squaraine neigen jedoch zur Bildung von Dimeren oder kleinen Aggregaten in Lösung mit kofazialen Chromophoranordnungen aufgrund Dispersionskräften und Dipol-Dipol-Wechselwirkungen. Dies resultiert in der Regel zu einer H-artigen exzitonischen Kopplung mit unerwünschten, blauverschobenen Absorptionsbanden und gelöschter Fluoreszenz.28 Daher war das Ziel dieser Dissertation, Dicyanomethylen-substituierte Squarainfarbstoffe zu entwickeln, die sich in Lösung zu verlängerten Aggregaten mit J-artiger Kopplung selbst organisieren. Auf diese Weise sollten die ausgezeichneten optischen Eigenschaften der Squarainfarbstoffe erhalten oder sogar verbessert werden. Zu diesem Zweck, wurden Bis(squarain)-Farbstoffe synthetisiert, in denen zwei Squarain-Einheiten kovalent verbunden sind, was zu einer gestapelten Anordnung mit longitudinalem Versatz innerhalb der Aggregate und damit zu einer J-artigen Kopplung führt. ... KW - Squaraine KW - Selbstorganisation KW - Farbstoff KW - Supramolekulare Chemie KW - Quadruplex-DNS KW - Self-assembly KW - Aggregation KW - exciton coupling KW - cooperative KW - spectroscopy Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-243599 ER - TY - THES A1 - Rest, Christina T1 - Self-assembly of amphiphilic oligo(phenylene ethynylene)-based (bi)pyridine ligands and their Pt(II) and Pd(II) complexes T1 - Selbstorganisation von amphiphilen oligo(phenylenethinylen)-basierten (Bi)pyridin-Liganden und ihrer Pt(II) und Pd(II) Komplexe N2 - The presented work in the field of supramolecular chemistry describes the synthesis and detailed investigation of (bi)pyridine-based oligo(phenylene ethynylene) (OPE) amphiphiles, decorated with terminal glycol chains. The metal-ligating property of these molecules could be exploited to coordinate to Pd(II) and Pt(II) metal ions, respectively, resulting in the creation of novel metallosupramolecular π-amphiphiles of square-planar geometry. The focus of the presented studies is on the self-assembly behaviour of the OPE ligands and their corresponding metal complexes in polar and aqueous environment. In this way, the underlying aggregation mechanism (isodesmic or cooperative) is revealed and the influence of various factors on the self-assembly process in supramolecular systems is elucidated. In this regard, the effect of the molecular design of the ligand, the coordination to a metal centre as well as the surrounding medium, the pH value and temperature is investigated. N2 - Die vorliegende Arbeit auf dem Gebiet der Supramolekularen Chemie beschäftigt sich mit der Synthese und detaillierten Untersuchung von (bi)pyridin-basierten Oligo(phenylenethinylen) (OPE)-Amphiphilen mit endständigen Glykolketten. Die komplexierende Eigenschaft dieser Moleküle wurde ausgenutzt um sie an Pd(II) bzw. Pt(II) Metallionen zu koordinieren, wobei neuartige metallosupramolekulare π-Amphiphile von quadratisch-planarer Geometrie entstehen. Das Hauptaugenmerk der beschriebenen Studien liegt auf der Selbstorganisation der OPE-Liganden und ihrer Metallkomplexe in polarer und wässriger Umgebung. Dabei wurde der zu Grunde liegende Aggregationsmechanismus (isodesmisch oder kooperativ) bestimmt und der Einfluss verschiedener Faktoren auf den Selbstorganisationsprozess in supramolekularen Systemen aufzeigt. Neben dem Effekt des Moleküldesigns des Liganden und dessen Koordination an ein Metallzentrum wird auch der des umgebenden Mediums, des pH-Wertes sowie der Temperatur erläutert. KW - Supramolekulare Chemie KW - Selbstorganisation KW - Kooperativität KW - Aggregat KW - Amphiphile Verbindungen KW - cooperativity KW - non-covalent interactions KW - (bi)pyridine-based ligand KW - oligo(phenylene ethynylene) (OPE) KW - self-assembly KW - metallosupramolecular π-amphiphiles KW - Aggregation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-133248 ER - TY - THES A1 - Huber, Valerie T1 - Selbstorganisation von semisynthetischen Zinkchlorinen zu biomimetischen Lichtsammelsystemen und definierten Nanostrukturen T1 - Self-Assembly of Semi-Synthetic Zinc Chlorins into Biomimetic Light-Harvesting Systems and Defined Nanostructures N2 - Diese Arbeit beschäftigt sich mit der Selbstorganisation von Zinkchlorin-Farbstoffen, welche sich strukturell von Chlorophyllen ableiten. Im Gegensatz zu allen anderen bakteriellen und pflanzlichen Lichtsammelpigmenten ist es den Bakteriochlorophyllen c, d und e der Lichtsammelsysteme grüner phototropher Bakterien möglich, allein durch nichtkovalente Wechselwirkungen zwischen den Farbstoff-Molekülen, ohne die Beteiligung von Proteinen, röhrenförmige Antennensysteme auszubilden, welche die am dichtest gepackten und effizientesten Lichtsammelsysteme in der Natur darstellen. Um einen Betrag zur Aufklärung dieser biologisch wichtigen Aggregate zu leisten, wurden im ersten Teil dieser Arbeit Zinkchlorine als Modellverbindungen für BChl c hergestellt. Mit den neu synthetisierten Zinkchlorinen ist es gelungen, Modellsysteme der natürlichen BChl-Selbstorganisate herzustellen, welche sich im Gegensatz zu den bisher in der Literatur beschriebenen Zinkchlorin-Aggregaten durch eine gute und dauerhafte Löslichkeit auszeichnen. Diese Eigenschaft erlaubte es sowohl spektroskopische als auch mikroskopische Untersuchungen zur Aufklärung der Aggregatstruktur durchzuführen. Durch Rasterkraftmikroskopie an den Zinkchlorin Aggregaten konnte erstmals ein mikroskopischer Beweis der stabförmigen Struktur von Aggregaten dieser Substanzklasse erhalten werden. Der zweite Teil dieser Arbeit beschäftigt sich mit Zinkchlorinen, denen aufgrund einer methylierten 31-Hydroxy-Gruppe die Fähigkeit zur Röhrenbildung fehlt, die aber durch Koordinationsbindungen und p-p-Wechselwirkungen weiterhin Stapel bilden können. Temperaturabhängige UV/Vis- und CD-spektroskopische Studien offenbarten die reversible Bildung von löslichen, chiralen Zinkchlorin-Stapelaggregaten. Rasterkraft- und rastertunnelmikroskopische Untersuchungen zeigen die Bildung von zwei Typen p-gestapelter Aggregate auf hoch geordnetem Graphit. N2 - This work deals with the self-assembly of zinc chlorin dyes, which are structurally derived from chlorophylls. In contrast to all other bacterial and herbal light-harvesting pigments, the bacteriochlorophylls c, d and e of green phototropic bacteria are able to build tubular antennae solely by noncovalent interactions between the dye molecules, without any involvement of proteins, which represent the most densely packed and efficient light-harvesting systems in nature. To contribute to the structural elucidation of this biologically important aggregates, in the first part of this work zinc chlorins were synthesized as model compounds for BChl c. With the newly synthesized zinc chlorins it was possible to build model systems of the natural BChl self-assemblies that are, in contrast to literature known zinc chlorin aggregates, characterized by a proficient and durable solubility. This favourable property allows spectroscopic as well as microscopic investigations for the elucidation of the aggregate structure. Atomic force microscopy of the aggregates provided by the first time also a microscopic evidence for the rod-shaped structure of the aggregates of this class of substances. The second part of this work deals with the zinc chlorins, which lack the possibility of forming tubular aggregates because of a methylated 31-hydroxy group, but they may still form stacks by coordinative bonds and p-p interactions. Temperature-dependent UV/Vis and CD spectroscopic studies bare the reversible formation of soluble and chiral stacked aggregates of zinc chlorins. Atomic force and scanning tunnelling microscopic studies show the formation of two different types of p-stacked aggregates on highly ordered graphite surface. KW - Farbstoff KW - Scheibe-Aggregat KW - Chlorophyllderivate KW - Selbstorganisation KW - Bakteriochlorophyll KW - Kraftmikroskopie KW - Rastertunnelmikroskopie KW - aggregation KW - chlorophyll KW - dyes KW - self-assembly KW - zinc chlorins. Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24517 ER - TY - THES A1 - Kriegisch, Volker T1 - Electron transfer processes between organic redox centres and electrodes via active bridges in self-assembled monolayers T1 - Elektronentransferprozesse zwischen organischen Redoxzentren und Elektroden mittels „aktiver“ Brückeneinheiten in selbstorganisierenden Monolagen N2 - Cyclovoltammetrische Messungen der Ferrocenalkylthiole 1 – 3 belegen, dass homogene, gemischte Monolagen aus redoxaktiven Verbindungen und redoxinaktiven Alkylthiolen gebildet werden. Die von Creager et al. bestimmten ET Raten der Ferrocenalkylthiole 1 – 3 konnten hierbei verifiziert werden. Wie erwartet erfolgt eine Abnahme der ET Geschwindigkeit bei einer Kettenverlängerung des Alkylspacers von 2 nach 3. Eine unterschiedliche Konnektivität zwischen Redoxzentrum und Alkylspacer, z. B. die Einführung einer Carbonyl-Funktion im Falle von 1, unter Beibehaltung der Kettenlänge zeigt keinen bemerkbaren Einfluß auf den ET. Trotzt vergleichbaren Abstands der aromatischen Ferrocenthiole 4 und 5 zu der C8-Alkyl-Verbindung 2 zwischen Redoxzentrum und Elektrode, weisen diese aufgrund ihrer starken Konjugation sehr hohe ET Geschwindigkeiten auf. Die elektronischen Kopplungsfaktoren selbst deuten auf einen nichtadiabtischen ET zwischen Redoxzentrum und Elektrode hin. Wie erwartet kommt es zu einem Anwachsen der Kopplungsfaktoren bei sich verkürzender Kettenlänge oder bei Einführung konjugierter Spacersysteme. Zusammenfassend kann gesagt werden, dass Erfahrungen hinsichtlich der Präparation der Monolagen gesammelt, die gemessenen ET Raten für der literaturbekannten Verbindungen 1 – 3 bestätigt und diese Informationen auf die konjugierten Verbindungen 4 und 5 angewandt werden konnten. Im zweiten Teil wurden die Triarylamin- (29, 32) und Phenothiazinalkylthiole (35) bezüglich ihres ET Verhaltens in gemischten Monolagen untersucht. Mittels Cyclovoltammetrie konnte gezeigt werden, daß einheitlich geformte, verdünnte Monolagen vorliegen. Die ET Raten der Triarylamin- (29, 32) und Phenithiazinalkylthiole (35) sind jedoch um den Faktor 10 bis 100 höher als vergleichbare Ferrocenalkylthiole gleicher Kettenlänge [1, 2], wohingegen für Monolagen, welche [Ru(bpy)2(pp)]+-Alkythiole enthalten, äquivalente Werte gefunden wurden [3]. Die ET Geschwindigkeit wird von zwei Parametern beeinflusst: dem elektronischen Kopplungsmatrixelement und der Regorganisationsenergie  [4]. Die ET Geschwindigkeit in Donor-substituierten Alkylthiolen wird hauptsächlich durch  beeinflusst und sogar kleine Änderungen dieser zeigen eine große Auswirkung auf die zu untersuchenden Prozesse. Aus diesem Grund wird eine Zunahme der ET Geschwindigkeit von Ferrocen (hohe Reorganisationsenergie) über die Phenothiazinverbindung 35 und [Ru(bpy)2(pp)]+ zu den Triarylaminchromophoren 29 und 32 (niedrige Reorganisationsenergie) beobachtet. Weiterhin spielt, im Gegensatz zu Beobachtung von Creager et al. an äquivalenten Ferrocenverbingungen, die Anbindung des Redoxzentrums an den Alkylspacer eine bedeutende Rolle. Im Falle der elektronenreichen Ether-verbrückten Verbindung 29 wird der ET nicht alleine durch , sondern ebenso durch mesomere Effekte bestimmt. Bei 29 kommt es durch Lokalisation der positiven Ladung nahe der Ether Funktion formal zu einer Kettenverkürzung um eine „Methyleneinheit“, welche schließlich in höheren ET Geschwindigkeiten resultiert. Im dritten Teil dieser Dissertation wurde ein Serie „molekularer Drähte“ bestehend aus Methoxy- oder Chlorid-substituierten Triarylamin- und Phenothiazinverbindungen mit unterschiedlichen Brückeneinheiten und Brückenlängen zwischen Redoxzentrum und Ankerfunktion dargestellt und im Hinblick auf ihr ET Verhalten untersucht. Durch cyclovoltammetrische und UV/Vis-spektroskopische Untersuchungen konnte gezeigt werden, dass sowohl die Oxidationspotentiale als auch die energetischen Zustände der Chromophore recht gut durch Einführung unterschiedlicher Redoxzentren und Brückeneinheiten beeinflusst werden können. Trotz erfolgreicher Kontrolle der Dichte der Chromophoreinheiten in den gemischten Monolagen konnte nur für die Verbindungen 49, 52 und 87 mit Nitril-substituierten Brückeneinheiten verlässliche ET Geschwindigkeiten erhalten werden. Bei diesen Chromphoren ist ein Absinken der ET Geschwindigkeit bei zunehmender Dichte der redoxaktiven Moleküle in den gemischten Monolagen zu beobachten, welche auf eine Änderung der Adsorptionsgeometrie hindeutet. Bei zunehmender Packungsdichte der Chromophore führt dies zu einer aufrechteren Stellung der redoxaktiven Spezies. Für alle anderen Verbindungen konnten keine Werte aufgrund der zu schnellen ET Geschwindigkeiten ermittelt werden. Konformelle, wie auch die sehr geringe Abstandsabhängigkeit des ET, resultieren in hohen ET Geschwindigkeiten oder auch ungünstige HOMO-LUMO Energien bezüglich des Donors, der Brücke und der Elektrode sind Gründe für dieses Verhalten. Die Tatsache, dass Verbindung 49 und 52 beinahe die gleichen Geschwindigkeitskonstanten des ETs unabhängig von der Anzahl der Brückeneinheiten (n = 2, n = 3) besitzen, deutet darauf hin, dass ein Hopping-Prozess stattfindet, bei welchem eine geringere Längenabhängigkeit des ETs als bei eine Superexchange-Mechanismus zu erwarten ist. N2 - In this work the influence of “active” bridge units on the electron transfer (ET) mechanism within organic donor-bridge-electrode arrays in self-assembled monolayers (SAMs) was studied by spectroscopic and electrochemical methods. In the first part of this work ferrocenealkanethiols 1 – 3 and the ferrocenearylthiols 4, 5 were investigated to get experience in the monolayer preparation for measuring ET rates. Cyclic voltammetry of the monolayers indicates that homogeneously mixed monolayers containing redox active molecules and dummy molecules were formed. For the known ferrocenealkanethiols 1 – 3 the ET rates could be confirmed compared to the ones measured by Creager et al. [206]. As expected the ET rate decreases by increasing chain length of the alkane spacer from 2 to 3. Changing the bonding between the redox centre and the alkane spacer with the same bridge lenght, e. g. by using a carboxy-group in case of 1, does not influence the ET behaviour very strong. The aromatic ferrocenethiols 4 and 5 show very high ET rates due to the strong conjugated system although the distance between the redox centre and the electrode is comparable to the C8-alkyl compound 2. The electronic coupling factors all indicate a nonadiabatic ET between the redox centre and the electrode. As expected the electronic coupling factors increase with decreasing spacer length or with an enlarged conjugated system. To sum up, experience in monolayer preparation could be obtained, the measured ET rates for well known ferrocenealkane-compounds 1 - 3 could be verified and the information could be transferred to the conjugated systems 4 and 5. In the second part the triarylamine- 29, 32 and the phenothiazinealkanethiol 35 have been examined relative to their ET behaviour in mixed monolayers. The cyclic voltammograms of the diluted monolayers indicate that homogeneously formed monolayers are present. The ET rates of triarylamine- 29, 32 and phenothiazinealkanethiols 35 are 10 to 100 times higher than compared to ferrocenealkanethiols with equal chain length[183, 206], whereas in a [Ru(bpy)2(pp)]+-containing monolayer the same value was observed [177]. Almost two parameters influence the ET rate constant: the electronic coupling matrix element and the reorganisation energy  [209]. The ET rate in donor substituted alkanethiols is mainly influenced by the reorganisation energy  [177] and even small changes have a dramatic effect on the observed processes, therefore an increasing ET rate from the ferrocene (high reorganisation energy) over the phenothiazine 35 and the [Ru(bpy)2(pp)]+ to the triarylamine chromophores 29 and 32 (low reorganisation energy) is observed. Furthermore the bonding between the redox centres and the alkane spacer plays an important role on the ET rate in case of the triarylamines 29 and 32 opposite to the assumption made by Creager et al. that the connection does not play any role. For the electron rich ether connected compound 29 the ET is not only dominated by the reorganisation energy but also by mesomeric effects where the positive charge of the electron rich derivative 29 is more located at the ether function so that the chain is formally shortend by one atom resulting in higher ET rates than compared to 32. In the third part of the thesis a series of “molecular wires” consisting of methoxy- or chloro-substituted triarylamines and phenothiazines with different bridge units and bridge length between the redox centre and the anchor thiol function have been prepared in order to investigate their ET-behaviour. Cyclic voltammetry and UV/vis-spectroscopy show that the oxidation potential and the energetic states could be controlled very well by introducing different redox centres and bridge units resulting in a decreasing oxidation potential of the redox centres and a bathochromic shift of the absorption bands in the UV/vis-spectra. Also the densitiy of the chromophores in mixed monolayers could be controlled very well for only three compounds (49, 52 and 87) with nitrile-substituted bridges reliable ET rates could be obtained. In these chromophores the ET rate decreases by increasing the density of the redox active molecules in the mixed monolayers indicating that the adsorption geometry changes with coverage with the chromophores tilting to a more upright orientation as the surface becomes more crowded. For all other compounds the measurements were limited by the fast ET rates. Conformational, as well as a very weak distance dependence of the ET resulting in very high ET rates [172] or unfavourable HOMO-LUMO energies of the donor, bridge and the electrode are reasons for this behaviour. The fact that compound 49 shows almost the same rate constant independent of the length (n = 2 or n = 3) may indicate that a hopping process is operating for which a much weaker length dependence is expected than in the case of a superexchange. KW - Monoschicht KW - Selbstorganisation KW - Triarylamine KW - Gold KW - Elektronentransfer KW - Chromophor KW - selbst organisierende Monolagen (SAM) KW - Gold KW - Elektronentransfer KW - Triarylamin KW - Chromophore KW - self-assembled monolayer (SAM) KW - gold KW - electron transfer KW - triarylamine Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-15892 ER - TY - THES A1 - Röger, Cornelia T1 - Bioinspired Light-Harvesting Zinc Chlorin Rod Aggregates Powered by Peripheral Chromophores T1 - Bioinspirierte lichtsammelnde Zinchlorin-Stabaggregate N2 - Artificial light-harvesting (LH) systems have been obtained by self-assembly of naphthalene diimide-functionalized zinc chlorin dyads and triad in nonpolar, aprotic solvents. UV-vis, CD, and steady-state emission spectroscopy as well as atomic force microscopy showed that rod-like structures are formed by excitonic interactions of zinc chlorin units, while the appended naphthalene diimide dyes do not aggregate at the periphery of the cylinders. In all cases, photoexcitation of the enveloping naphthalene diimides at 540 and 620 nm, respectively, was followed by highly efficient energy-transfer processes to the inner zinc chlorin backbone, as revealed by time-resolved fluorescence spectroscopy on the picosecond time-scale. As a consequence, the LH efficiencies of zinc chlorin rod aggregates were increased by up to 63%. The effective utilization of solar energy recommends these biomimetic systems for an application in electronic materials on the nanoscale. N2 - In der vorliegenden Arbeit werden selbstorganisierte Lichtsammelsysteme auf der Basis von Napthalinbisimid-funktionalisierten Zinkchlorinen beschrieben. KW - Farbstoff KW - Scheibe-Aggregat KW - Naphthalinbisimid KW - Chlorin KW - Selbstorganisation KW - Lichtsammelsystem KW - Energietransfer KW - naphthalene diimide KW - chlorin KW - self-assembly KW - light harvesting KW - energy transfer Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26760 ER - TY - THES A1 - Chen, Zhijian T1 - pi-Stacks Based on Self-Assembled Perylene Bisimides : Structural, Optical, and Electronic Properties T1 - pi-Stapel von selbstaggregierten Perylenbisimiden : Strukturelle, Optische und Electronische Eigenschaften N2 - As a traditional industrial pigment, perylene bisimide (PBI) dyes have found wide-spread applications. In addition, PBI dyes have been considered as versatile and promising functional materials for organic-based electronic and optic devices, such as transistors and solar cells. For these novel demands, the control of self-organization of this type of dye and the investigation of the relationship between the supramolecular structure and the relevant optical and electronic properties is of great importance. The objective of this thesis focuses on gaining a better understanding of structural and functional properties of pi-stacks based on self-assembling PBIs. Studies include the synthesis and characterization of new functional PBI dyes, their aggregation in solution, in liquid crystalline state and on surfaces, and their fluorescence and charge transport properties. An overview of the formation, thermodynamics and structures of pi-stacks of functional pi- conjugated molecules in solution and in liquid crystalline phases is given in Chapter 2. Chapters 3 and 4 deal with the pi-pi aggregates of new, highly fluorescent PBIs without core-substituents. In Chapter 3, the self-assembly of a PBI with tridodecylphenyl substituents at imide N atoms both in solution and condensed phase has been studied in great detail. In condensed state, the dye exhibits a hexagonal columnar liquid crystalline (LC) phase as confirmed by DSC, OPM and X-ray diffraction analysis. The columnar stacking of this dye has been further confirmed by atomic force microscopy (AFM) where single columns could be well resolved The charge transport properties this dye have been investigated by pulse radiolysis-time resolved microwave conductivity (PR-TRMC) measurements. To shed more light on the nature of the pi-pi interaction of the unsubstituted PBIs, solvent depend aggregation properties have been investigated in Chapter 4. The studies are further extended from core-unsubstituted PBIs to core-substituted ones (Chapter 5 and 6). In Chapter 5, a series of highly soluble and fluorescent core-twisted PBIs that bear the same trialkylphenyl groups at the imide positions but different bay-substituents and were synthesized. These compounds are characterized by distortions of the perylene planes with dihedral angles in the range of 15-37° according to crystallographic data and molecular modeling studies. In contrast to the extended oligomeric aggregates formed for planar unsubstituted PBIs, this family of dyes formed discrete pi-pi-stacked dimers in apolar methylcyclohexane as concentration-dependent UV/Vis measurements and VPO analysis revealed. The Gibbs free energy of dimerization can be correlated with the twist angles of the dyes linearly. In condensed state, several of these PBIs form luminescent rectangular or hexagonal columnar liquid crystalline phases with low isotropization temperatures. The core-twisting effect on semiconducting properties has been examined in Chapter 6. In this chapter, a comparative study of the electrochemical and the charge transport properties of a series of non-substituted and chlorine-functionalized PBIs was performed. While Chapters 3-6 focus on one-component dye systems, Chapter 7 explored the possibility of a supramolecular engineering of co-aggregates formed by hydrogen-bonded 2:1 and 1:1 complex of oligo(p-phenylene vinylene)s (OPVs) and PBIs. Covalently linked donor-acceptor dye arrays have been prepared for comparison. Concentration and temperature-dependent UV/Vis spectroscopy revealed all hydrogen-bonded and covalent systems form well-ordered J-type aggregates in methylcyclohexane. With these hydrogen-bonded OPV-PBI complexes, fibers containing p-type and n-type molecules can be prepared on the nano-scale (1-20 nm). For the 2:1 OPV-PBI hydrogenbonded arrays hierarchically assembled chiral superstructures consisting of left-handed helical pi-pi co-aggregates (CD spectroscopy) of the two dyes that further assemble into right-handed nanometer-scale supercoils in the solid state (AFM study) have been observed. All of these well-defined OPV-PBI assemblies presented here exhibit photoinduced electron transfer on sub-ps timescale, while the electron recombination differs for different systems.Thus, it was suggested that such assemblies of p- and n-type semiconductors might serve as valuable nanoscopic functional units for organic electronics. N2 - Als traditionsreiches in industriellem Maßstab produziertes Pigment finden Perylenbisimid (PBI)-Farbstoffe Verwendung in vielen verschiedenen Anwendungsgebieten. Außerdem sind diese Farbstoffe aufgrund ihrer vielseitigen funktionellen Eigenschaften aussichtsreiche Kandidaten für auf organischen Materialen basierende elektronische und optische Einheiten, wie z.B. Transistoren oder Solarzellen. Für diese neuen Herausforderungen ist die gezielte Kontrolle bzw. Steuerung der Selbstorganisation dieser Farbstofftypen sowie die Erforschung des Zusammenhangs zwischen der supramolekularen Struktur und den optischen und elektronischen Eigenschaften von großem Interesse. Ziel dieser Arbeit war es daher, ein besseres Verständnis für strukturelle und funktionelle Eigenschaften pi-gestapelter Chromophore am Beispiel selbst-aggregierender PBI-Farbstoffe zu entwickeln. Dies umfaßt die Synthese und die Charakterisierung neuer funktioneller PBI-Farbstoffe, die Untersuchung ihrer Aggregate in Lösung, in flüssigkristallinen Phasen, Dünnschichten auf verschiedenen Oberflächen, sowie der Fluoreszenz- und Ladungsträgertransporteigenschaften. Ein Überblick über den Selbstaggregationsprozess, die thermodynamischen Eigenschaften und die Strukturen von pi-Stapeln verschiedener funktioneller pi-konjugierter Moleküle in Lösung und in flüssigkristallinen Phasen wird in Kapitel 2 gegeben. Kapitel 3 und 4 beschäftigen sich mit den pi-pi-Aggregaten neuartiger, stark fluoreszierender PBIs ohne Kernsubstituenten. In Kapitel 3 wurde das Aggregationsverhalten eines PBIs mit Tridodecylphenyl-Substituenten an den Imid-N-Atomen sowohl in Lösung als auch in der kondensierten Phase sehr detailiert untersucht. In der kondensierten Phase wurde eine kolumnar-hexagonale flüssigkristalline (LC) Phase mittels Differenzialkalorimetrie (DSC), optischer Polarisationsmikroskopie und Pulverröntgendiffraktometrie nachgewiesen. Die eindimensionale Stapelanordnung wurde zudem mittels Rasterkraftmikroskopie (AFM) bestätigt, welche ausgedehnte kolumnare Strukturen ergaben. Die Ladungstransporteigenschaften dieses Farbstoffes wurden mittels „pulse radiolysis-time resolved microwave“ (PR-TRMC) Experimenten untersucht. Zur weiteren Aufklärung der Natur der pi-pi-Interaktion des unsubstituierten PBI wurden in Kapitel 4 die lösungsmittelabhängigen Eigenschaften untersucht. Die Studien wurden zudem ausgedehnt von kernunsubstituierten auf kernsubstituierte PBIFarbstoffe. In Kapitel 5 werden die Synthesen einer Reihe sehr gut löslicher, fluoreszierender, nichtplanarer PBI-Farbstoffe vorgestellt, welche dieselben Trialkylphenylimidisubstituenten, jedoch unterschiedliche Bay-Substituenten tragen. Für diese Substanzen wurden mittels kristallographischer Daten sowie quantenchemischer Berechnungen Diederwinkelwinkel im Bereich 15 bis 37° ermittelt. Im Gegensatz zu den ausgedehnten oligomeren Aggregaten des planaren PBI bildet diese Farbstoffklasse aufgrund der Verdrillung des aromatischen Kerns in apolaren Lösungsmitteln wie Methylcyclohexan diskrete pi-pi-gestapelte Dimere. Die Freie Enthalpie für die Dimerisierung korreliert dabei linear mit dem Verdrillungswinkel. In der kondensierten Phase bilden einige dieser PBI-Farbstoffe fluoreszierende, rektangulare bzw. hexagonale kolumnare LC Phasen mit niedrigen Klärtemperaturen. In Kapitel 6 wurden die Auswirkungen des Verdrillungswinkels auf die Halbleitereigenschaften untersucht. Es wurden vergleichende Studien der elektrochemischen Eigenschaften sowie der Ladungsträgertransporteigenschaften einer Serie unsubstituierter und chlorfunktionalisierter PBI-Farbstoffe durchgeführt. Während in Kapitel 3-6 der Fokus auf Einkomponenten-Farbstoffaggregaten lag, wurde in Kapitel 7 die Möglichkeiten einer supramolekularer Anordnung von Co-Aggregaten untersucht, welche durch wasserstoffbrückengebundene 2:1 und 1:1 Komplexe zwischen Oligo(p-phenylenevinylenen) (OPVs) und PBIs aufgebaut sind. Mit diesen wasserstoffbrückengebundenen OPV-PBI Komplexen lassen sich eindimensionale Aggregate auf der Nanoskala erzeugen, welche aus p- und n-halbleitenden Molekülen bestehen. Für die wasserstoffbrückengebundenen 2:1 OPV-PBI Komplexe wurden Anordnungen beobachtet, welche chirale Überstrukturen mit links-drehenden, helicalen pi-pi- Co-Aggregaten (CD-Spectroscopie) aufweisen, die sich wiederum in rechts-drehenden Superhelices bündeln (AFM-Studien). Während für alle OPV-PBI Aggregate photoinduzierte Elektronentransferprozesse im subps Zeitskalenbereich beobachtet wurden, unterschieden sich die Rekombinationsraten je nach System beträchtlich. Somit ist diese Art von organisierten nanoskopischen p- und n-halbleitenden funktionellen. Bausteinen aussichtsreich für verschiedene Anwendungen in der Organischen Elektronik. KW - Perylenderivate KW - Farbstoff KW - Flüssigkristall KW - Selbstorganisation KW - Perylenbisimiden KW - selbstaggregierten KW - Flüssigkristall KW - Farbstoff KW - perylene bisimide KW - self-assembly KW - liquid crystal KW - functional dyes Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-19940 ER - TY - THES A1 - Lohr, Andreas T1 - Self-Assembly of Merocyanines : Thermodynamic and Kinetic Insights into the Formation of Well-Defined Dye Aggregates T1 - Selbstorganisation von Merocyaninen : Thermodynamische und Kinetische Einblicke in die Bildung definierter Farbstoffaggregate N2 - The present thesis demonstrates the potential of dipolar aggregation of merocyanine dyes as novel directional and specific supramolecular binding motif for the creation of more elaborate supramolecular architectures beyond simple dimers. Furthermore, the self-assembly studies into bis(merocyanine) nanorods gave new insights into the kinetics of morphogenesis in supramolecular aggregates. N2 - In der vorliegenden Arbeit konnte das Potential der dipolaren Aggregation von Merocyaninfarbstoffen als neuartiges, gerichtetes und spezifisches Bindungsmotif zum Aufbau wesentlich komplexerer supramolekularer Architekturen als einfachen Dimeren aufgezeigt werden. Desweiteren lieferten Studien zur Selbstorganisation von Bis(merocyanin)-Nanostäbchen neue Erkenntnisse zur Morphogenese supramolekularer Aggregate. KW - Supramolekulare Chemie KW - Selbstorganisation KW - Farbstoff KW - Kinetik KW - Merocyanin KW - H-Aggregate KW - Nanostrukturen KW - Chiralität KW - Merocyanine KW - H-Aggregate KW - Nanostructure KW - Chirality Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28964 ER - TY - THES A1 - Shao, Changzhun T1 - Programming Self-assembly: Formation of Discrete Perylene Bisimide Aggregates T1 - Steuerung der Selbstassemblierung: Aufbau der diskreten Perylenbisimid-Aggregaten N2 - The objective of this thesis focuses on the development of strategies for precise control of perylene bisimide (PBI) self-assembly and the in-depth elucidation of structural and optical features of discrete PBI aggregates by means of NMR and UV/Vis spectroscopy. The strategy for discrete dimer formation of PBIs is based on delicate steric control that distinguishes the two facets of the central perylene surface. The strategy applied in this thesis for accessing discrete PBI quadruple and further oligomeric stacks relies on backbone-directed PBI self-assembly. For this purpose, two tweezer-like PBI dyads bearing the respective rigid backbones, diphenylacetylene (DPA) and diphenylbutydiyne (DPB), were synthesized. The distinct aggregation behavior of these structurally similar PBI dyads can be ascribed to the intramolecular distance between the two PBI chromophores imparted by the DPA and DPB spacers. N2 - Das Ziel dieser Arbeit ist die Entwicklung von Strategien für die präzise Steuerung der PBI-Selbstorganisation sowie die gründliche Aufklärung der strukturellen und optischen Eigenschaften von diskreten PBI-Aggregaten mittels NMR- und UV/Vis-Spektroskopie. Die Strategie der diskreten Dimerbildung von PBIs ist auf der empfindlichen sterischen Kontrolle begründet, die eine Differenzierung der beiden Facetten der zentralen Perylenoberfläche ermöglicht. Um diskrete vierfache und höhere oligomere PBI-Stapel zu erhalten, behilft sich die vorliegende Arbeit der PBI-Selbstorganisation, die durch ein Rückgrat vermittelt wird. Zu diesem Zweck wurden zwei pinzettenartige PBI-Dyaden synthetisiert, die die starren Rückgrate Diphenylacetylen (DPA) bzw. Diphenylbutydiyn (DPB) tragen (Abbildung 2). Das unterschiedliche Aggregationsverhalten dieser strukturell ähnlichen PBI-Dyaden kann den verschiedenen intramolekularen Abständen der beiden PBI-Chromophore zugeschrieben werden, die durch DPA bzw. DPB als Abstandshalter vorgegeben werden. KW - Farbstoff KW - perylene bisimide KW - self-assembly KW - dimer KW - Perylenderivate KW - Selbstorganisation Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69298 ER - TY - THES A1 - Li, Xueqing T1 - Hydrogen Bond-directed Self-assembly of Perylene Bisimide Organogelators N2 - Perylene bisimide (PBI) dyes are a widely used class of industrial pigments, and currently have gained significant importance for organic-based electronic and optical devices. Structural modification at the PBI core results in changes of the optical and electronic properties, which enable tailored functions. Moreover, the aggregation behavior of PBIs is alterable and controllable to achieve new materials, among which organogels are of particular interest because of their potential for applications as supramolecular soft materials. In this work, new PBI-based organic gelators were designed, synthesized, and characterized, and the aggregation behaviors under different conditions were intensively studied by various spectroscopic and microscopic methods. In chapter 2, a brief overview is given on the structural and functional features of organogel systems. The definition, formation and reversibility of organogels are introduced. Some examples on dye based organogel are selected, among which PBI-based organogelators reported so far are especially emphasized. Some basic knowledges of supramolecular chirality are also overviewed such as characterization, amplification, and symmetry breaking of the chiral aggregates. According to our former experiences, PBIs tend to form aggregates because the planer aromatic cores interact with one another by pi-pi interaction. In chapter 3, a new PBI molecule is introduced which possesses amide groups between the conjugated core and periphery alkyl chains. It is found that well oriented aggregates are formed by hydrogen bonding and the pi-pi interaction of the cores. These interactions enable the aggregates to grow in one-dimension forming very long fibers, and these fibers further intercross to 3D network structures, e.g., organogels. In comparison to the very few PBI-based gelators reported before, one advantage of this gelator is that, it is more versatile and can gelate a wide range of organic solvents. Moreover, the well-organized fibers that are composed of extended π-stacks provide efficient pathways for n-type charge carriers. Interestingly, AFM studies reveal that the PBI molecules form well-defined helical fibers in toluene. Both left-handed (M) and right-handed (P) helicities can be observed without any preference for one handedness because the building block is intrinsically achiral. In chapter 4, we tried to influence the M/P enantiomeric ratio by applying external forces. For example, we utilized chiral solvents to generate chiral aggregates with a preferential handedness. AFM analysis of the helices showed that a enantiomeric ratio of about 60: 40 can be achieved by aggregation in chiral solvents R- or S-limonene. Moreover, the long aggregated fibres can align at macroscopic level in vortex flows upon rotary stirring In chapter 5, bulky tetra-phenoxy groups are introduced in the bay area of the PBI gelator. The conjugated core of the new molecule is now distorted because of the steric hindrance. UV/Vis studies reveal a J-type aggregation in apolar solvents like MCH due to intermolecular pi-pi-stacking and hydrogen-bonding interactions. Microscopic studies reveal formation of columnar aggregates in apolar solvent MCH, thus this molecule lacks the ability to form gels in this solvent, but form highly fluorescent lyotropic mesophases at higher concentration. On the other hand, in polar solvents like acetone and dioxane, participation of the solvent molecules in hydrogen bonding significantly reduced the aggregation propensity but enforced the gel formation. The outstanding fluorescence properties of the dye in both J-aggregated viscous lyotropic mesophases and bulk gel phases suggest very promising applications in photonics, photovoltaics, security printing, or as fluorescent sensors. In chapter 6, we did some studies on combining PBI molecules with inorganic gold nanorods. Gold nanorods were synthesized photochemically. By virtue of the thioacetate functionalized PBIs, the rods were connected end to end to form gold nanochains, which were characterized by absorption spectra and TEM measurement. Such chromophore-nanorod hybrids might be applied to guide electromagnetic radiation based on optical antenna technology. KW - Perylenderivate KW - Selbstorganisation KW - Wasserstoffbrückenbindung KW - Gelieren KW - Supramolekulare Struktur KW - organogelator KW - perylene bisimide KW - self-assembly Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-43727 ER -