TY - THES A1 - Peethambaran Nair Syamala, Pradeep T1 - Bolaamphiphilic Rylene Bisimides: Thermodynamics of Self-assembly and Stimuli-responsive Properties in Water T1 - Bolaamphiphile Rylenebisimide: Thermodynamik der Selbstorganisation und Stimuli-responsiven Merkmale in Wasser N2 - The present thesis demonstrates how different thermodynamic aspects of self-assembly and stimuli-responsive properties in water can be encoded on the structure of π-amphiphiles, consisting of perylene or naphthalene bisimide cores. Initially, quantitative thermodynamic insights into the entropically-driven self-assembly was studied for a series of naphthalene bisimides with UV/Vis and ITC measurements, which demonstrated that their thermodynamic profile of aggregation is heavily influenced by the OEG side chains. Subsequently, a control over the bifurcated thermal response of entropically driven and commonly observed enthalpically driven self-assembly was achieved by the modulation of glycol chain orientation. Finally, Lower Critical Solution Temperature (LCST) phenomenon observed for these dyes was investigated as a precise control of this behavior is quintessential for self-assembly studies as well as to generate ‘smart’ materials. It could be shown that the onset of phase separation for these molecules can be encoded in their imide substituents, and they are primarily determined by the supramolecular packing, rather than the hydrophobicity of individual monomers. N2 - Die vorliegende Arbeit zeigt, wie verschiedene thermodynamische Aspekte der Selbstorganisation sowie die Stimuli-responsiven Merkmale in Wasser mittels der Struktur von π-Amphiphilen mit Perylen- oder Naphthalinbisimidkernen programmiert werden können. Zunächst wurden quantitative thermodynamische Einblicke in die entropisch getriebene Selbstorganisation für eine Reihe von Naphthalinbisimiden mit UV / Vis- und ITC-Messungen untersucht. Diese zeigten, dass ihr thermodynamisches Aggregationsprofil stark von den Oligoethylenglykol-Seitenketten beeinflusst wird. Anschließend wurde durch gezielte Modulation der Glykolketten und der daraus resultierenden Neuorientierung der Ketten, eine Kontrolle über die Thermodynamik der Selbstassemblierung zwischen der häufiger beobachtbaren enthalpisch getriebenen und der entropisch getriebenen Selbstorganisation erreicht. Schließlich wurde das für diese Farbstoffe beobachtete Phänomen der niedrigeren kritischen Lösungstemperatur (LCST) untersucht, da eine genaue Kontrolle dieses Verhaltens für Selbstorganisationsstudien sowie für die Erzeugung „intelligenter“ Materialien von entscheidender Bedeutung ist. Es konnte gezeigt werden, dass der Beginn der Phasentrennung für diese Moleküle von ihren Imidsubstituenten und hauptsächlich durch die supramolekulare Packung bestimmt werden und nicht durch die Hydrophobie einzelner Monomere. KW - Supramolekulare Chemie KW - Aggregation KW - Selbstorganisation KW - Wasser KW - Supramolecular Chemistry KW - Thermodynamics KW - Self-assembly KW - Lower Critical Solution Temperature (LCST) KW - Water KW - Organische Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-213424 ER - TY - THES A1 - Kirchner, Eva T1 - Discrete Supramolecular Stacks by Self-Assembly and Folding of Bis(merocyanine) Dyes T1 - Definierte supramolekulare Stapel durch Selbstassemblierung und Faltung von Bis(merocyanin)-Farbstoffen N2 - The present thesis describes the development of a strategy to create discrete finite-sized supramolecular stacks of merocyanine dyes. Thus, bichromophoric stacks of two identical or different chromophores could be realized by folding of bis(merocyanine) dyes and their optical properties were discussed in terms of exciton theory. Quantum chemical calculations revealed strong exciton coupling between the chromophores within the homo- and hetero-π-stacks and the increase of the J-band of the hetero-dimers with increasing energy difference between the excited states of the chromophores could be attributed not only to the different magnitudes of transition dipole moments of the chromophores but also to the increased localization of the excitation in the respective exciton state. Furthermore, careful selection of the length of the spacer unit that defines the interplanar distance between the tethered chromophores directed the self-assembly of the respective bis(merocyanines) into dimers, trimers and tetramers comprising large, structurally precise π-stacks of four, six or eight merocyanine chromophores. It could be demonstrated that the structure of such large supramolecular architectures can be adequately elucidated by commonly accessible analysis tools, in particular NMR techniques in combination with UV/vis measurements and mass spectrometry. Supported by TDDFT calculations, the absorption spectra of the herein investigated aggregates could be explained and a relationship between the absorption properties and the number of stacking chromophores could be established based on exciton theory. N2 - Die vorliegende Arbeit beschreibt die Entwicklung einer Strategie zur Herstellung definierter supramolekularer Stapel aus Merocyaninfarbstoffen. So konnten Dimere bestehend aus zwei identischen oder unterschiedlichen Chromophoren durch Faltung von Bis(merocyanin)-Farbstoffen realisiert und ihre optischen Eigenschaften anhand von Exzitonentheorie diskutiert werden. Quantenchemische Rechnungen ergaben eine starke Exzitonenkopplung sowohl zwischen gleichartigen, als auch zwischen energetisch unterschiedlichen Merocyaninfarbstoffen und der Anstieg der J-Bande der Heterodimere mit zunehmender Energiedifferenz zwischen den angeregten Zuständen der Chromophore konnte nicht nur der unterschiedlichen Größe der Übergangsdipolmomente der Chromophore, sondern auch der zunehmenden Lokalisation der Anregung im jeweiligen Exzitonenzustand zugeschrieben werden. Darüber hinaus führte die sorgfältige Auswahl der Länge der Linkereinheit, welche den interplanaren Abstand zwischen den beiden Chromophoren im Bis(merocyanin) definiert, zur Selbstassemblierung zu Dimeren, Trimeren und Tetrameren, welche definierte π-Stapel bestehend aus vier, sechs oder acht Merocyaninchromophoren umfassen. Es konnte gezeigt werden, dass die Struktur solch großer supramolekularer Architekturen mittels allgemein zugänglicher Analyseverfahren, insbesondere der NMR-Technik in Kombination mit UV/vis-Messungen und Massenspektrometrie, aufgeklärt werden kann. Anhand der so etablierten Modellsysteme konnten schließlich die Absorptionseigenschaften definierter π-Stapel diskutiert und ein Zusammenhang mit der Anzahl der gestapelten Chromophore hergestellt werden. KW - Merocyanine KW - Exziton KW - Supramolekulare Struktur KW - Selbstorganisation KW - Merocyanine dyes KW - Exciton coupling KW - Supramolecular aggregates KW - Self-assembly KW - Exzitonenkopplung KW - Supramolekulare Aggregate KW - Selbstassemblierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159419 ER - TY - THES A1 - Schlosser, Felix T1 - Synthese und Charakterisierung kovalent gebundener Perylenbisimid-Makrozyklen T1 - Synthesis and characterization of covalently linked perylene bisimide macrocycles N2 - Eine Reihe von Acetylen-verknüpften Perylenbisimid(PBI)-Makrozyklen mit unterschiedlicher Ringgröße wurde durch Palladium-katalysierte Homokupplung synthetisiert und mit Hilfe von Recycling-GPC getrennt. Diese Makrozyklen wurden durch NMR-Spektroskopie und Massenspektrometrie charakterisiert und weiterhin die photophysikalischen Eigenschaften durch UV/Vis-Absorptions- und Fluoreszenzemissions-Messungen untersucht. Die Selbstorganisation dieser PBI-Makrozyklen zu hochgeordneten Nanostrukturen auf HOPG-Oberflächen wurde mittels Rasterkraftmikroskopie untersucht. N2 - A series of acetylene-linked perylene bisimide (PBI) macrocycles with various ring sizes have been synthesised by a palladium-catalysed homocoupling reaction and separated by recycling GPC. These macrocycles were characterised by NMR spectroscopy and mass spectrometry. Furthermore, the photophysical properties have been examined by steady-state absorption and fluorescence measurements. The self-assembly of these PBI macrocycles into highly ordered nanopatterns on HOPG surfaces was investigated by atomic force microscopy. KW - Makrocyclische Verbindungen KW - Perylenderivate KW - Selbstorganisation KW - Perylen KW - Farbstoff KW - Makrozyklus KW - supramolekular KW - Perylendianhydrid KW - Oberflächenstruktur KW - perylene KW - dye KW - macrocycle KW - supramolecular Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-71811 ER - TY - THES A1 - Schmidt, Ralf T1 - Hamilton-Receptor-Mediated Self-Assembly of Merocyanine Dyes into Supramolecular Polymers T1 - Hamilton-Rezeptor-vermittelte Selbstorganisation von Merocyaninfarbstoffen zu supramolekularen Polymeren N2 - Die Selbstorganisation von Merocyaninfarbstoffen zu supramolekularen Polymeren wurde untersucht. Dabei konnte die Anordnung der hoch dipolaren Farbstoffe durch die Verwendung von verschiedenen Kombinationen von Wasserstoffbrückenbindungsmotiven und dipolarer Aggregation der Chromophore gesteuert. N2 - The self-assembly of merocyanine dyes into supramolecular polymers has been studied. Thereby, the spacial arrangement of the highly dipolar dyes has been controled by employing different combinations of hydrogen bonding motifs and dipolar aggregation of the chromophores. KW - Selbstorganisation KW - Merocyanine KW - Polymere KW - Supramolekulare Struktur KW - Organische Chemie KW - cooperativity KW - dipolar aggregation KW - dyes/pigments KW - hydrogen bond KW - self-assembly Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56265 ER - TY - THES A1 - Sengupta, Sanchita T1 - Bio-inspired Zinc Chlorin Dye Assemblies for Supramolecular Electronics T1 - Bio-adaptierte Zink-Chlorin Farbstoffverbände für supramolekulare Elektronik N2 - Chlorophylls are the most important pigments owing to their involvement in photosynthesis. They perform multiple functions that arise due to their optical and redox as well as packing properties. Semisynthetic zinc chlorins investigated in this thesis are the counterparts for the natural protein-free bacteriochlorophyll (BChl) c assemblies in light-harvesting (LH) systems in bacterial chlorosomes. The major advantage of the zinc chlorin model compounds over the native BChls lies in their facile semisynthetic accessibility from chlorophyll a (Chl a), their higher chemical stability and the possibility to influence their packing by suitable chemical modifications of peripheral side chains. Whilst the favorable excitonic properties and the suitability of ZnChl and natural BChl c dye aggregates for long distance exciton transport are well documented, charge transport properties of aggregates of semisynthetic ZnChls are hitherto unexplored. The present study involves structural elucidations of aggregates of a variety of semisynthetic zinc chlorin derivatives in solution, in solid state and on surfaces by combination of spectroscopic, crystallographic and microscopic techniques, followed by investigation of charge transport properties and conductivities of these aggregates. Chart 1 shows the different ZnChls synthesized in this work that are functionalized with hydroxy or methoxy substituents at 31 position and contain different substituents at the 172-position benzyl ester functional group. The self-assembly of these dyes is strongly dependent upon their chemical structures. While ZnChls 1a, 2a, 3, which are functionalized with 31-hydroxy group bearing dodecyl and oligoethylene glycol side chains form well-soluble rod aggregates, the corresponding 31-methoxy functionalized counterparts 1b, 2b form stacks in solution and on surfaces. These supramolecular polymers have been studied in detail in Chapter 3 by UV/Vis and circular dichroism (CD) spectroscopy and dynamic light scattering (DLS). These studies provided useful insights into the aggregation process of these two types of aggregates. Whereas 31-hydroxy functionalized ZnChl 1a self-assemble into rod aggregates via an isodesmic mechanism, corresponding stack aggregates of ZnChl 1b are formed by a cooperative nucleation-elongation pathway. Detailed electron microscopic studies such as transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) provided unequivocal evidence for hollow tubular nanostructures of water-soluble 31-hydroxy zinc chlorin 3 aggregates for the first time. The measured tube diameter of ~ 5-6 nm of these aggregates is in excellent agreement with electron microscopy data of BChl c rod aggregates in chlorosomes (Chloroflexus aurantiacus, diameter ~ 5-6 nm) and thus complied with the tubular model postulated by Holzwarth and Schaffner... In concord with their highly organized structures, micrometer-scale one dimensionality, robust nature and efficient charge transport capabilities, these self-assembled ZnChl nanotubular, stack and liquid crystalline assemblies are highly promising for supramolecular electronic applications. Research efforts in utilizing these assemblies for (opto)electronic device fabrication, for instance, in organic field effect transistors, should thus be rewarding in the future... N2 - Die Chlorophylle stellen in der Natur die wichtigsten Pigmente dar, weil sie verantwortlich für die Photosynthese sind und hierbei vielfältige Funktionen wahrnehmen, die sich aus ihrer Selbstassemblierung sowie den vorteilhaften optischen und Redox-Eigenschaften ergeben. Die in dieser Arbeit untersuchten semisynthetischen Zinkchlorine stellen Modellverbindungen des natürlichen Bacteriochlorophylls c (BChl c) der Lichtsammelsysteme (light-harvesting: LH) in Chlorosomen von Bakterien, jedoch ohne Proteingerüst, dar. Die entscheidenden Vorteile dieser Zinkchlorine (ZnChl) gegenüber den natürlichen BChls bestehen im einfachen semisynthetischen Zugang ausgehend von Chlorophyll a (Chl a), ihrer gesteigerten chemischen Stabilität sowie der Möglichkeit ihre Selbstassemblierung durch gezielte chemische Modifizierung der Seitenketten in der Peripherie zu steuern. Während bereits mehrfach über die vielversprechenden Redox- und excitonischen Eigenschaften von Aggregaten von ZnChl und natürlichem BChl c und den damit verbundene Voraussetzungen für Excitontransport über große Distanzen berichtet wurde, sind die Ladungstransporteigenschaften von Aggregaten der biomimetischen ZnChl bis heute unerforscht. Die vorliegende Arbeit beschäftigt sich mit der Aufklärung der Struktur von Aggregaten einer Vielzahl von semisynthetischen Zinkchlorophyllderivaten im Feststoff, in Lösung und auf Oberflächen durch die Kombination verschiedenster spektroskopischer, kristallographischer und mikroskopischer Techniken an die sich Untersuchungen zum Ladungstransport in den Aggregaten anschließen. Schema 1 zeigt die verschiedenen, in dieser Arbeit synthetisierten ZnChls, die entweder mit einer Hydroxy- oder Methoxygruppe in der 31-Position funktionalisiert sind sowie Substituenten unterschiedlicher Art, Länge und Verzweigung an der Benzylestergruppe in 172-Position tragen.Die Packung dieser Farbstoffe hängt entscheidend von ihrer chemischen Struktur ab. Während die ZnChls 1a, 2a, 3 mit 31-Hydroxygruppe und Alkylseitenketten (Dodecyl bzw. Oligoethylenglykol) gut lösliche stabförmige Aggregate bilden, lagern sich die analogen Verbindungen mit 31-Methoxygruppe (1b, 2b) zu Stapeln in Lösung und auf Oberflächen zusammen. Diese supramolekularen Polymere wurden im Detail in Kapitel 3 mit Hilfe von UV/Vis- und CD-Spektroskopie (circular dichroism: CD) sowie dynamische Lichtstreuung (dynamic light scattering: DLS) untersucht. Darüber hinaus lieferten temperaturabhängige UV/Vis- in Kombination mit DLS-Messungen wertvolle Informationen über die Aggregationsprozess dieser beiden Sorten von Aggregaten. Während sich die ZnChl 1a mit 31 Hydroxygruppe entsprechend dem isodesmischen Modell zu röhrenförmigen Aggregaten zusammenlagern, bilden sich die stapelförmigen Aggregate von 1b nach einem kooperativen Keimbildungs-Wachstums-Mechanismus (nucleation-elongation mechanism). Detaillierte elektronenmikroskopische Studien lieferten erstmals überzeugende Beweise für röhrenförmige Nanostrukturen der Aggregate des wasserlöslichen 31-Hydroxy Zinkchlorin 3. Die gemessenen Durchmesser der Röhren von ~ 5-6 nm dieser Aggregate liegen in hervorragender Übereinstimmung mit den Elektronenmikroskopie-Daten von BChl c Stabaggregaten in Chlorosomen (Chloroflexus aurantiacus, Durchmesser ~ 5-6 nm) und entsprechen damit dem von Holzwarth und Schaffner postulierten röhrenförmigen Modell... Im Einklang mit ihren hoch geordneten, robusten Strukturen, die sich eindimensional in einer Größenordnung von Mikrometeren erstrecken, sowie ihrer Fähigkeit zum effizienten Ladungs-trägertransport stellen diese selbstassemblierten Nanoröhren von ZnChls vielversprechende Ausgangsmaterialien für die Fertigung supramolekularer elektronischer Bauteile dar. Wissenschaftliche Bemühungen einige dieser Moleküle und ihre entsprechenden supramolekularen Polymere für die Fertigung von (opto-)elektronischen Bauteilen wie organischen Feldeffekttransistoren zu benutzten, stellen lohnende Aufgaben für die Zukunft dar... KW - Supramolekulare Chemie KW - Selbstorganisation KW - Chlorinderivate KW - Farbstoff KW - Selbstassemblierung KW - supramolekularen Elektronik KW - Zinkchlorine KW - Zinc Chlorin KW - Self-assembly KW - Supramolecular electronics Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66935 ER - TY - THES A1 - Safont Sempere, Marina Montserrat T1 - Chiral self-sorting of atropo-enantiomeric perylene bisimide dyes T1 - Chirale Self-sortierung von Atropo-enantiomerische Perilene Bisimide Farbstofe N2 - This thesis included the synthesis of conformationally stable chiral perylene bisimide (PBI) dyes, the study of their optical properties in solution and their chiral self-sorting behaviour in nonpolar solvents in which dimerization via pi-pi-stacking takes place. Furthermore, the influence of PBI core chirality on the properties of these dyes in the condensed state has been also studied. We have demonstrated and quantified the prevalence of chiral self-recognition over self-discrimination in pi-stacking dimerization of PBIs. It has been shown that this self-recognition event is compromised by the increasing flexibility of the structures related to the size of the OEG bridging units. Moreover, the inherent chirality of these PBIs has been proven to strongly influence their condensed state properties, for which large differences between the pure enantiomers and the racemates were revealed, as well as between the different bridged macrocyclic PBIs. N2 - Das Ziel der vorliegenden Arbeit war die Synthese von konformationsstabilen chiralen Perylenbisimidfarbstoffen (PBI), die Bestimmung ihrer optischen Eigenschaften in Lösung und ihrer chiralen Selbstsortierung in unpolaren Lösungsmitteln, in denen Dimerisierung durch pi-pi-Stapelung stattfindet. Des Weiteren wurde noch der Einfluss der PBI Kernchiralität auf die flüssigkristallinen Eigenschaften untersucht. Zusammenfassend konnte im Rahmen dieser Arbeit die Bevorzugung der chiralen Selbst-Erkennung gegenüber der Selbst-Diskriminierung in pi-gestapelten dimerisierten PBIs quantifiziert und bewiesen werden. Eine erhöhte Flexibilität der Moleküle durch Verlängerung der OEG Brückeneinheiten verringert jedoch die Qualität dieses Selbsterkennungsvorgangs. Des Weiteren hat die Chiralität dieser PBIs einem sehr starken Einfluss auf die Eigenschaften der kondensierten Materie, in welcher große Unterschiede für reine Enantiomere und das Racemat sowie zwischen PBIs mit unterschiedlichen Brückeneinheiten gefunden wurden. KW - Farbstoff KW - Selbstorganisation KW - Chiralität KW - Atropisomerie KW - Self-Sortierung KW - pi-pi Wechselwirkungen KW - Aggregation KW - self-sorting KW - chirality KW - pi-pi- stacking Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55359 ER - TY - THES A1 - Görl, Daniel T1 - Hydrophobe Effekte bolaamphiphiler Rylenbisimide T1 - Hydrophobic effects of bolaamphiphilic rylene bisimides N2 - Die Selbstorganisation von amphiphilen Molekülen zählt zu den am intensivsten bearbeiteten Forschungsgebieten der Supramolekularen Chemie. Die faszinierenden supramolekularen Architekturen der Natur zeigen eindrucksvoll, wie neuartige Funktionen durch das Zusammenspiel wohl-definierter Molekülensembles in einer wässrigen Umgebung entstehen. Es ist bekannt, dass der hydrophobe Effekt dabei eine entscheidende Rolle in der Selbstorganisation spielt und somit die Funktion eines Systems wesentlich bestimmt. Obwohl die Komplexität der bekannten Beispiele aus der Natur unerreicht ist, wurden in den letzten Jahren unzählige künstliche supramolekulare Architekturen basierend auf amphiphilen Molekülen erschaffen, mit vielfältigen Anwendungsmöglichkeiten an der Schnittstelle von Chemie, Biologie und Physik. Darunter eröffnen insbesondere amphiphile π-konjugierte Systeme einen einfachen Zugang zu vielfältigen Strukturen, da im wässrigen Medium starke π-π-Wechselwirkungen als strukturbildendes Element ausgenutzt werden können. Vor allem wegen vielversprechender Anwendungsmöglichkeiten spiegelt sich die Selbstorganisation solcher Systeme in einem hohen Forschungsinteresse wider. Dennoch ist das Wirken des hydrophoben Effekts in der Selbstassemblierung amphiphiler π-konjugierter Moleküle weitgehend unverstanden. Die vorliegende Arbeit befasste sich daher mit der Frage, welche physikochemischen Grundprinzipien die Bildung von supramolekularen Polymeren basierend auf amphiphilen π-konjugierten Molekülen in Wasser steuern und wie der hydrophobe Effekt die Funktionalität solcher Strukturen beeinflusst. Bolaamphiphile Perylenbisimide (PBIs) und Naphthalinbisimide (NBIs) erwiesen sich dabei für das Moleküldesign als besonders geeignet, weil sie vergleichsweise einfach dargestellt werden können, ihre hohe Symmetrie weniger komplexe Assoziationsprozesse begründet und die Untersuchung ihrer Selbstassemblierung im wässrigen Medium weiterhin einen Vergleich erlaubt, wie sich der hydrophobe Effekt bezüglich unterschiedlich großen π-Systemen auswirkt. Es konnte gezeigt werden, dass OEG-basierte Rylenbisimide unter bestimmten strukturgeometrischen Voraussetzungen eine entropiegetriebene Aggregation aufweisen, wenn die Freisetzung von Wassermolekülen aus einer wohl-definierten Hydrathülle ausreicht, um den Enthalpiegewinn aus den im wässrigen Medium verstärkten Dispersionswechselwirkungen zwischen den π-Flächen zu übertreffen. Im vorliegenden Fall wurde dies durch das Pinsel-Strukturmotiv der symmetrisch angebrachten Imidsubstituenten erreicht, für die sich damit einhergehend eine gänzlich andere Temperaturabhängigkeit beobachten ließ und somit eine gänzlich andere Funktionalität, als man sie aus organischen Lösungsmitteln kennt. Wasser als Lösungsmittel führt also nicht nur zu einer signifikanten Bindungsverstärkung, sondern öffnet Zugang zu supramolekularen Systemen mit neuartigen Funktionen. Die entropiegetriebene Freisetzung von Wassermolekülen konnte daher im Rahmen dieser Arbeit ausgenutzt werden, um gleichzeitig die intrinsische Ordnung im π-Stapel von PBIs zu erhöhen, was anhand eines temperatursensorischen Hydrogels anschaulich demonstriert wurde. Darüber hinaus stellte sich heraus, dass Wasser ein geeignetes Lösungsmittel zur Darstellung supramolekularer Kompositmaterialien ist. Wie anhand sich instantan bildender Co-Aggregate gezeigt wurde, ist die entropiegetriebene Assemblierung der entscheidende Faktor zur Darstellung von komplexeren supramolekularen Strukturen, die überdies einen Schritt hin zu den hochkomplexen multimolekularen Anordnungen der Natur darstellen. N2 - The self-assembly of amphiphilic molecules is one of the most intensively studied research area of supramolecular chemistry. The fascinating supramolecular architectures of nature impressively show how novel functions arise through the interplay of well-defined molecular ensembles in an aqueous environment. It is known that the hydrophobic effect plays a crucial role in the self-organization, and thus significantly determines the function of a system. Although the complexity of the known examples from nature is unmatched, numerous artificial supramolecular architectures based on amphiphilic molecules have been created in recent years with various applications at the interface of chemistry, biology and physics. Particularly, amphiphilic π-conjugated systems disclose an easy access to a variety of structures, since strong π-π interactions in the aqueous medium can be utilized as a structure determining element. Primarily due to promising applications, the self-organization of such systems is reflected in a high research interest. However, the way how hydrophobic effects operate in the self-assembly of amphiphilic π-conjugated molecules is poorly understood. Therefore, the present work deals with the question of which physicochemical principles govern the formation of supramolecular polymers based on amphiphilic π-conjugated molecules in water and how the hydrophobic effect influences the functionality of such structures. Bolaamphiphilic perylene bisimides (PBIs) and naphthalene bisimides (NBIs) proved to be particularly useful regarding the molecular design because they can be easily synthesized, their high symmetry accounts for less complex association processes and the study of their self-assembly in aqueous medium enables a comparison of the impact of hydrophobic effects on π-systems of different sizes. It could be shown that OEG-based rylene bisimides may be subject to an entropically driven aggregation depending on certain geometrical structural features, when the release of water molecules from a well-defined hydration shell overwhelms the enthalpy gain of the dispersion interaction forces between the π-surfaces. In the present study, this was achieved by the brush-like structural motif of the symmetrically introduced imide substituents, for which thus an entirely different temperature dependence and functionality as well have been observed compared to those known for organic solvents. Water as solvent leads not only to a significant increase of the binding strength, but opens access to supramolecular systems with novel functions. The entropically driven release of water molecules could be utilized in this work in order to simultaneously increase the intrinsic order in π-stacks of PBIs, which has been demonstrated by means of a temperature sensoric hydrogel. Moreover, water is a suitable solvent for the preparation of supramolecular composite materials. The instantaneously formed co-aggregates have shown that the entropically driven assembly is a decisive factor for the creation of more complex supramolecular structures that moreover constitute a step towards the highly complex multi-molecular assemblies of nature. KW - Selbstorganisation KW - Amphiphile Verbindungen KW - Perylenbisdicarboximide KW - Ethylenglykolderivate KW - Hydrophober Effekt KW - Selbstassemblierung in Wasser KW - supramolekulare Farbstoffchemie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123172 ER - TY - THES A1 - Rehm, Stefanie T1 - Spermine-functionalized Perylene Bisimide Dyes: Synthesis and Self-assembly in Water T1 - Spermin-funktionalisierte Perylenbisimid Farbstoffe: Synthese und Selbstassemblierung in Wasser N2 - The main objective of this thesis was the design and synthesis of perylene bisimide dyes with sufficient water-solubility for the construction of self-assembled architectures in aqueous solutions. Beside these tasks another goal of this project was the control over the self-assembly process in terms of aggregate size and helicity, respectively. Within this thesis an appropriate synthesis for spermine-functionalized perylene bisimide dyes was developed and conducted successfully. The characterization of these building blocks and their course of self-assembly were investigated by NMR, UV/Vis and fluorescence spectroscopy as well as by atomic force and transmission electron microscopy. For the better understanding of the experimental results theoretical calculations were performed. N2 - Ziel dieser Dissertation war das Design und die Synthese von Perylenbisimiden mit hinreichender Wasserlöslichkeit, die für den Aufbau von selbständig assemblierten Strukturen in wässrigen Lösungen verwendet werden sollen. Ein weiteres Ziel dieses Projektes war die Kontrolle über den Prozess der Selbstanordnung hinsichtlich der Aggregatgröße beziehungsweise deren Helizität. Im Rahmen dieser Doktorarbeit wurde eine entsprechende Synthese für Spermin-funktionalisierte Perylenbisimide entworfen und erfolgreich durchgeführt. Die Charakterisierung dieser Bausteine und der Prozess deren Selbstanordnung wurde mit Hilfe von NMR-, UV/Vis- und Fluoreszenz-Spektroskopie aber auch mit Rasterkraft- und Elektronentransmissionsmikroskopie durchgeführt. Für das bessere Verständnis der experimentellen Ergebnisse wurden theoretische Berechnungen durchgeführt. KW - Perylenderivate KW - Selbstorganisation KW - perylene bisimide KW - spermine KW - polyamine KW - bola-amphiphile KW - fluorescence KW - Perylenbisimid KW - Spermin KW - Polyamin KW - Bola-Amphiphil KW - Fluoreszenz KW - Aggregation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123201 ER - TY - THES A1 - Hecht, Markus T1 - Liquid-Crystalline Perylene Bisimide and Diketopyrrolopyrrole Assemblies T1 - Flüssigkristalline Perylenbisimid- und Diketopyrrolopyrrolstrukturen N2 - The research presented in this thesis illustrates that self-assembly of organic molecules guided by intermolecular forces is a versatile bottom-up approach towards functional materials. Through the specific design of the monomers, supramolecular architectures with distinct spatial arrangement of the individual building blocks can be realized. Particularly intriguing materials can be achieved when applying the supramolecular approach to molecules forming liquid-crystalline phases as these arrange in ordered, yet mobile structures. Therefore, they exhibit anisotropic properties on a macroscopic level. It is pivotal to precisely control the interchromophoric arrangement as functions originate in the complex structures that are formed upon self-assembly. Consequently, the aim of this thesis was the synthesis and characterization of liquid-crystalline phases with defined supramolecular arrangements as well as the investigation of the structure-property relationship. For this purpose, perylene bisimide and diketopyrrolopyrrole chromophores were used as they constitute ideal building blocks towards functional supramolecular materials due to their thermal stability, lightfastness, as well as excellent optical and electronic features desirable for the application in, e.g., organic electronics. N2 - Mithilfe von Gestaltungsprinzipien der supramolekularen Chemie können komplexe Strukturen realisiert werden, die mit Ansätzen der kovalenten Chemie nicht erreichbar sind. Ein zentraler Aspekt ist hierbei der systematische Aufbau der Monomereinheiten, welche unter geeigneten Bedingungen über intermolekulare Wechselwirkungen selbstassemblieren und Architekturen mit spezifischer räumlicher Anordnung der einzelnen Bauelemente formen. Flüssigkristalline Materialien zeigen zusätzlich zu positioneller und Orientierungsfernordnung der Moleküle, welche anisotrope Eigenschaften auf makroskopischer Ebene erzeugen, eine gewisse Mobilität. Daher können durch Kombination des supramolekularen Ansatzes mit Flüssigkristallen besonders interessante Materialien erzeugt werden. Da die spezische Anordnung der Moleküle die Funktion des selbstassemblierten Materials stark beeinflusst, ist es von großer Bedeutung, diese exakt kontrollieren zu können. Daher war es Ziel dieser Arbeit, flüssigkristalline Phasen mit einer definierten supramolekularen Struktur zu synthetisieren und zu charakterisieren. Weiterhin war es ein Ziel, diese auf ihre funktionellen Eigenschaften zu untersuchen, die aus der spezifischen Anordnung der Monomereinheiten hervorgehen. Für diesen Zweck wurden Perylenbisimid- und Diketopyrrolopyrrolfarbstoffe als Baueinheiten verwendet, da diese aufgrund ihrer Licht- und Hitzestabilität sowie exzellenten optischen und elektronischen Eigenschaften ideale Materialien für die Anwendung in der organischen Elektronik darstellen. KW - Selbstorganisation KW - Flüssigkristall KW - Perylenderivate KW - Perylene Bisimide KW - Liquid Crystal KW - J-Aggregates KW - Photoconductivity KW - Self-Assembly KW - Perylenbisimid Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-216987 ER - TY - THES A1 - Shen, Chia-An T1 - Dicyanomethylene Squaraines: Aggregation and G-Quadruplex Complexation T1 - Dicyanomethylen-Squaraine: Aggregation und G-Quadruplex-Komplexierung N2 - Squaraine dyes have attracted more attention in the past decade due to their strong and narrow absorption and fluorescence along with the easily functionalized molecular structure. One successful approach of core functionalization is to replace one oxygen of the squaric carbonyl group with a dicyanomethylene group, which shifts the absorption and emission into the near infrared (NIR) region and at the same time leads to a rigid, planar structure with C2v symmetry. However, such squaraines tend to aggregate cofacially in solution due to dispersion forces and dipole-dipole interactions, usually leading to H-type exciton coupling with undesired blue-shifted spectrum and quenched fluorescence. Therefore, the goal of my research was the design of dicyanomethylene-substituted squaraine dyes that self-assemble into extended aggregates in solution with J-type coupling, in order to retain or even enhance their outstanding optical properties. Toward this goal, bis(squaraine) dyes were envisioned with two squaraine units covalently linked to trigger a slip-stacked packing motif within the aggregates to enable J-type coupling. In my first project, bis(squaraine) dye BisSQ1 was synthesized, in which two dicyanomethylene squaraine chromophores are covalently linked. Concentration and temperature-dependent UV/Vis/NIR spectroscopy experiments reveal that BisSQ1 undergoes cooperative self-assembly resulting in J-type aggregates in a solvent mixture of toluene/1,1,2,2-tetrachloroethane (TCE) (98:2, v/v). The J type exciton coupling is evident from the significantly red shifted absorption maximum at 886 nm and the fluorescence peak at 904 nm. In conclusion, this was a first example to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by simply connecting two dyes in a head-to-tail bis chromophore structure. Connecting two squaraine dyes with an additional phenylene spacer (BisSQ2) leads to two different polymorphs with very distinct absorption spectra upon cooling down a solution of BisSQ2 in a solvent mixture of toluene/TCE (98:2, v/v) with different rates. Accordingly, rapid cooling resulted in rigid helical nanorods with an absorption spectrum showing a panchromatic feature, while slow cooling led to a sheet-like structure with a significant bathochromic shift in the absorption spectrum. It was discovered that the conventional molecular exciton model failed to explain the panchromatic absorption features of the nanorods for the given packing arrangement, therefore more profound theoretical investigations based on the Essential States Model (ESM) were applied to unveil the importance of intermolecular charge transfer (ICT) to adequately describe the panchromatic absorption spectrum. Moreover, the red-shift observed in the spectrum for the sheet-like structure can be assigned to the interplay of Coulomb coupling and ICT-mediated coupling. Furthermore, the same bis-chromophore strategy was adopted for constructing an NIR-II emitter with a bathochromically-shifted spectrum. In chloroform, BisSQ3 exhibits an absorption maximum at 961 nm with a significant bathochromic shift (1020 cm−1) compared to the reference mono-squaraine SQ, indicating intramolecular J-type coupling via head-to-tail arrangement of two squaraine dyes. Moreover, BisSQ3 shows a fluorescence peak at 971 nm with a decent quantum yield of 0.33%. In less polar toluene, BisSQ3 self-assembles into nanofibers with additional intermolecular J-type coupling, causing a pronounced bathochromic shift with absorption maximum at 1095 nm and a fluorescence peak at 1116 nm. Thus, connecting two quinoline-based squaraines in a head-to-tail fashion leads to not only intra-, but also intermolecular J-type exciton coupling, which serves as a promising strategy to shift the absorption and emission of organic fluorophores into the NIR-II window while retaining decent quantum yields. In conclusion, my research illustrates based on squaraine dyes how a simple modification of the molecular structure can significantly affect the aggregation behavior and further alter the optical properties of dye aggregates. Elongated supramolecular structures based on dicyanomethylene substituted squaraine dyes were successfully established by covalently linking two squaraine units to form a bis-chromophore structure. Then, a simple but efficient general approach was established to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by directly connecting two squaraine dyes in a head-to-tail fashion without spacer units. Moreover, the additional spacer between the squaraine dyes in BisSQ2 allowed different molecular conformations, which leads to two different morphologies depending on the cooling rates for a hot solution. Hence, this is a promising strategy to realize supramolecular polymorphism. In general, it is expected that the concept of constructing J-aggregates by the bis-chromophore approach can be extended to entirely different classes of dyes since J-aggregates possess a variety of features such as spectral shifts into the NIR window, fluorescence enhancement, and light harvesting, which are commonly observed and utilized for numerous fundamental studies and applications. Moreover, the insights on short-range charge transfer coupling for squaraine dyes is considered of relevance for all materials based on alternating donor-acceptor π-systems. The panchromatic spectral feature is in particular crucial for acceptor-donor-acceptor (ADA) dyes, which are currently considered as very promising materials for the development of bulk heterojunction solar cells. N2 - Squarainfarbstoffe haben in den letzten Jahren aufgrund ihrer hervorragenden optischen Eigenschaften, zu denen ein Cyanin-ähnliches Absorptions- und Fluoreszenzverhalten zählt, in Kombination mit einer leicht funktionalisierbaren Molekülstruktur immer mehr Aufmerksamkeit auf sich gezogen.22 Ein erfolgreicher Ansatz der Kernfunktionalisierung besteht darin, ein Sauerstoffatom der Quadratsäure-Carbonylgruppe durch eine Dicyanomethyleneinheit zu ersetzen, was die Absorption und Emission in den nahen infraroten (NIR-) Bereich verschiebt und gleichzeitig zu einer starren planaren Struktur mit C2v Symmetrie und einem Grundzustandsdipolmoment führt.27 Diese Eigenschaften haben sich als vorteilhaft für die π-π-Aggregation von diesen Squarainen auf G-Quadruplex (G4) Strukturen erwiesen, wie in Kapitel 6 beschrieben. Solche Squaraine neigen jedoch zur Bildung von Dimeren oder kleinen Aggregaten in Lösung mit kofazialen Chromophoranordnungen aufgrund Dispersionskräften und Dipol-Dipol-Wechselwirkungen. Dies resultiert in der Regel zu einer H-artigen exzitonischen Kopplung mit unerwünschten, blauverschobenen Absorptionsbanden und gelöschter Fluoreszenz.28 Daher war das Ziel dieser Dissertation, Dicyanomethylen-substituierte Squarainfarbstoffe zu entwickeln, die sich in Lösung zu verlängerten Aggregaten mit J-artiger Kopplung selbst organisieren. Auf diese Weise sollten die ausgezeichneten optischen Eigenschaften der Squarainfarbstoffe erhalten oder sogar verbessert werden. Zu diesem Zweck, wurden Bis(squarain)-Farbstoffe synthetisiert, in denen zwei Squarain-Einheiten kovalent verbunden sind, was zu einer gestapelten Anordnung mit longitudinalem Versatz innerhalb der Aggregate und damit zu einer J-artigen Kopplung führt. ... KW - Squaraine KW - Selbstorganisation KW - Farbstoff KW - Supramolekulare Chemie KW - Quadruplex-DNS KW - Self-assembly KW - Aggregation KW - exciton coupling KW - cooperative KW - spectroscopy Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-243599 ER - TY - THES A1 - Rest, Christina T1 - Self-assembly of amphiphilic oligo(phenylene ethynylene)-based (bi)pyridine ligands and their Pt(II) and Pd(II) complexes T1 - Selbstorganisation von amphiphilen oligo(phenylenethinylen)-basierten (Bi)pyridin-Liganden und ihrer Pt(II) und Pd(II) Komplexe N2 - The presented work in the field of supramolecular chemistry describes the synthesis and detailed investigation of (bi)pyridine-based oligo(phenylene ethynylene) (OPE) amphiphiles, decorated with terminal glycol chains. The metal-ligating property of these molecules could be exploited to coordinate to Pd(II) and Pt(II) metal ions, respectively, resulting in the creation of novel metallosupramolecular π-amphiphiles of square-planar geometry. The focus of the presented studies is on the self-assembly behaviour of the OPE ligands and their corresponding metal complexes in polar and aqueous environment. In this way, the underlying aggregation mechanism (isodesmic or cooperative) is revealed and the influence of various factors on the self-assembly process in supramolecular systems is elucidated. In this regard, the effect of the molecular design of the ligand, the coordination to a metal centre as well as the surrounding medium, the pH value and temperature is investigated. N2 - Die vorliegende Arbeit auf dem Gebiet der Supramolekularen Chemie beschäftigt sich mit der Synthese und detaillierten Untersuchung von (bi)pyridin-basierten Oligo(phenylenethinylen) (OPE)-Amphiphilen mit endständigen Glykolketten. Die komplexierende Eigenschaft dieser Moleküle wurde ausgenutzt um sie an Pd(II) bzw. Pt(II) Metallionen zu koordinieren, wobei neuartige metallosupramolekulare π-Amphiphile von quadratisch-planarer Geometrie entstehen. Das Hauptaugenmerk der beschriebenen Studien liegt auf der Selbstorganisation der OPE-Liganden und ihrer Metallkomplexe in polarer und wässriger Umgebung. Dabei wurde der zu Grunde liegende Aggregationsmechanismus (isodesmisch oder kooperativ) bestimmt und der Einfluss verschiedener Faktoren auf den Selbstorganisationsprozess in supramolekularen Systemen aufzeigt. Neben dem Effekt des Moleküldesigns des Liganden und dessen Koordination an ein Metallzentrum wird auch der des umgebenden Mediums, des pH-Wertes sowie der Temperatur erläutert. KW - Supramolekulare Chemie KW - Selbstorganisation KW - Kooperativität KW - Aggregat KW - Amphiphile Verbindungen KW - cooperativity KW - non-covalent interactions KW - (bi)pyridine-based ligand KW - oligo(phenylene ethynylene) (OPE) KW - self-assembly KW - metallosupramolecular π-amphiphiles KW - Aggregation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-133248 ER - TY - THES A1 - Huber, Valerie T1 - Selbstorganisation von semisynthetischen Zinkchlorinen zu biomimetischen Lichtsammelsystemen und definierten Nanostrukturen T1 - Self-Assembly of Semi-Synthetic Zinc Chlorins into Biomimetic Light-Harvesting Systems and Defined Nanostructures N2 - Diese Arbeit beschäftigt sich mit der Selbstorganisation von Zinkchlorin-Farbstoffen, welche sich strukturell von Chlorophyllen ableiten. Im Gegensatz zu allen anderen bakteriellen und pflanzlichen Lichtsammelpigmenten ist es den Bakteriochlorophyllen c, d und e der Lichtsammelsysteme grüner phototropher Bakterien möglich, allein durch nichtkovalente Wechselwirkungen zwischen den Farbstoff-Molekülen, ohne die Beteiligung von Proteinen, röhrenförmige Antennensysteme auszubilden, welche die am dichtest gepackten und effizientesten Lichtsammelsysteme in der Natur darstellen. Um einen Betrag zur Aufklärung dieser biologisch wichtigen Aggregate zu leisten, wurden im ersten Teil dieser Arbeit Zinkchlorine als Modellverbindungen für BChl c hergestellt. Mit den neu synthetisierten Zinkchlorinen ist es gelungen, Modellsysteme der natürlichen BChl-Selbstorganisate herzustellen, welche sich im Gegensatz zu den bisher in der Literatur beschriebenen Zinkchlorin-Aggregaten durch eine gute und dauerhafte Löslichkeit auszeichnen. Diese Eigenschaft erlaubte es sowohl spektroskopische als auch mikroskopische Untersuchungen zur Aufklärung der Aggregatstruktur durchzuführen. Durch Rasterkraftmikroskopie an den Zinkchlorin Aggregaten konnte erstmals ein mikroskopischer Beweis der stabförmigen Struktur von Aggregaten dieser Substanzklasse erhalten werden. Der zweite Teil dieser Arbeit beschäftigt sich mit Zinkchlorinen, denen aufgrund einer methylierten 31-Hydroxy-Gruppe die Fähigkeit zur Röhrenbildung fehlt, die aber durch Koordinationsbindungen und p-p-Wechselwirkungen weiterhin Stapel bilden können. Temperaturabhängige UV/Vis- und CD-spektroskopische Studien offenbarten die reversible Bildung von löslichen, chiralen Zinkchlorin-Stapelaggregaten. Rasterkraft- und rastertunnelmikroskopische Untersuchungen zeigen die Bildung von zwei Typen p-gestapelter Aggregate auf hoch geordnetem Graphit. N2 - This work deals with the self-assembly of zinc chlorin dyes, which are structurally derived from chlorophylls. In contrast to all other bacterial and herbal light-harvesting pigments, the bacteriochlorophylls c, d and e of green phototropic bacteria are able to build tubular antennae solely by noncovalent interactions between the dye molecules, without any involvement of proteins, which represent the most densely packed and efficient light-harvesting systems in nature. To contribute to the structural elucidation of this biologically important aggregates, in the first part of this work zinc chlorins were synthesized as model compounds for BChl c. With the newly synthesized zinc chlorins it was possible to build model systems of the natural BChl self-assemblies that are, in contrast to literature known zinc chlorin aggregates, characterized by a proficient and durable solubility. This favourable property allows spectroscopic as well as microscopic investigations for the elucidation of the aggregate structure. Atomic force microscopy of the aggregates provided by the first time also a microscopic evidence for the rod-shaped structure of the aggregates of this class of substances. The second part of this work deals with the zinc chlorins, which lack the possibility of forming tubular aggregates because of a methylated 31-hydroxy group, but they may still form stacks by coordinative bonds and p-p interactions. Temperature-dependent UV/Vis and CD spectroscopic studies bare the reversible formation of soluble and chiral stacked aggregates of zinc chlorins. Atomic force and scanning tunnelling microscopic studies show the formation of two different types of p-stacked aggregates on highly ordered graphite surface. KW - Farbstoff KW - Scheibe-Aggregat KW - Chlorophyllderivate KW - Selbstorganisation KW - Bakteriochlorophyll KW - Kraftmikroskopie KW - Rastertunnelmikroskopie KW - aggregation KW - chlorophyll KW - dyes KW - self-assembly KW - zinc chlorins. Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24517 ER - TY - THES A1 - Kriegisch, Volker T1 - Electron transfer processes between organic redox centres and electrodes via active bridges in self-assembled monolayers T1 - Elektronentransferprozesse zwischen organischen Redoxzentren und Elektroden mittels „aktiver“ Brückeneinheiten in selbstorganisierenden Monolagen N2 - Cyclovoltammetrische Messungen der Ferrocenalkylthiole 1 – 3 belegen, dass homogene, gemischte Monolagen aus redoxaktiven Verbindungen und redoxinaktiven Alkylthiolen gebildet werden. Die von Creager et al. bestimmten ET Raten der Ferrocenalkylthiole 1 – 3 konnten hierbei verifiziert werden. Wie erwartet erfolgt eine Abnahme der ET Geschwindigkeit bei einer Kettenverlängerung des Alkylspacers von 2 nach 3. Eine unterschiedliche Konnektivität zwischen Redoxzentrum und Alkylspacer, z. B. die Einführung einer Carbonyl-Funktion im Falle von 1, unter Beibehaltung der Kettenlänge zeigt keinen bemerkbaren Einfluß auf den ET. Trotzt vergleichbaren Abstands der aromatischen Ferrocenthiole 4 und 5 zu der C8-Alkyl-Verbindung 2 zwischen Redoxzentrum und Elektrode, weisen diese aufgrund ihrer starken Konjugation sehr hohe ET Geschwindigkeiten auf. Die elektronischen Kopplungsfaktoren selbst deuten auf einen nichtadiabtischen ET zwischen Redoxzentrum und Elektrode hin. Wie erwartet kommt es zu einem Anwachsen der Kopplungsfaktoren bei sich verkürzender Kettenlänge oder bei Einführung konjugierter Spacersysteme. Zusammenfassend kann gesagt werden, dass Erfahrungen hinsichtlich der Präparation der Monolagen gesammelt, die gemessenen ET Raten für der literaturbekannten Verbindungen 1 – 3 bestätigt und diese Informationen auf die konjugierten Verbindungen 4 und 5 angewandt werden konnten. Im zweiten Teil wurden die Triarylamin- (29, 32) und Phenothiazinalkylthiole (35) bezüglich ihres ET Verhaltens in gemischten Monolagen untersucht. Mittels Cyclovoltammetrie konnte gezeigt werden, daß einheitlich geformte, verdünnte Monolagen vorliegen. Die ET Raten der Triarylamin- (29, 32) und Phenithiazinalkylthiole (35) sind jedoch um den Faktor 10 bis 100 höher als vergleichbare Ferrocenalkylthiole gleicher Kettenlänge [1, 2], wohingegen für Monolagen, welche [Ru(bpy)2(pp)]+-Alkythiole enthalten, äquivalente Werte gefunden wurden [3]. Die ET Geschwindigkeit wird von zwei Parametern beeinflusst: dem elektronischen Kopplungsmatrixelement und der Regorganisationsenergie  [4]. Die ET Geschwindigkeit in Donor-substituierten Alkylthiolen wird hauptsächlich durch  beeinflusst und sogar kleine Änderungen dieser zeigen eine große Auswirkung auf die zu untersuchenden Prozesse. Aus diesem Grund wird eine Zunahme der ET Geschwindigkeit von Ferrocen (hohe Reorganisationsenergie) über die Phenothiazinverbindung 35 und [Ru(bpy)2(pp)]+ zu den Triarylaminchromophoren 29 und 32 (niedrige Reorganisationsenergie) beobachtet. Weiterhin spielt, im Gegensatz zu Beobachtung von Creager et al. an äquivalenten Ferrocenverbingungen, die Anbindung des Redoxzentrums an den Alkylspacer eine bedeutende Rolle. Im Falle der elektronenreichen Ether-verbrückten Verbindung 29 wird der ET nicht alleine durch , sondern ebenso durch mesomere Effekte bestimmt. Bei 29 kommt es durch Lokalisation der positiven Ladung nahe der Ether Funktion formal zu einer Kettenverkürzung um eine „Methyleneinheit“, welche schließlich in höheren ET Geschwindigkeiten resultiert. Im dritten Teil dieser Dissertation wurde ein Serie „molekularer Drähte“ bestehend aus Methoxy- oder Chlorid-substituierten Triarylamin- und Phenothiazinverbindungen mit unterschiedlichen Brückeneinheiten und Brückenlängen zwischen Redoxzentrum und Ankerfunktion dargestellt und im Hinblick auf ihr ET Verhalten untersucht. Durch cyclovoltammetrische und UV/Vis-spektroskopische Untersuchungen konnte gezeigt werden, dass sowohl die Oxidationspotentiale als auch die energetischen Zustände der Chromophore recht gut durch Einführung unterschiedlicher Redoxzentren und Brückeneinheiten beeinflusst werden können. Trotz erfolgreicher Kontrolle der Dichte der Chromophoreinheiten in den gemischten Monolagen konnte nur für die Verbindungen 49, 52 und 87 mit Nitril-substituierten Brückeneinheiten verlässliche ET Geschwindigkeiten erhalten werden. Bei diesen Chromphoren ist ein Absinken der ET Geschwindigkeit bei zunehmender Dichte der redoxaktiven Moleküle in den gemischten Monolagen zu beobachten, welche auf eine Änderung der Adsorptionsgeometrie hindeutet. Bei zunehmender Packungsdichte der Chromophore führt dies zu einer aufrechteren Stellung der redoxaktiven Spezies. Für alle anderen Verbindungen konnten keine Werte aufgrund der zu schnellen ET Geschwindigkeiten ermittelt werden. Konformelle, wie auch die sehr geringe Abstandsabhängigkeit des ET, resultieren in hohen ET Geschwindigkeiten oder auch ungünstige HOMO-LUMO Energien bezüglich des Donors, der Brücke und der Elektrode sind Gründe für dieses Verhalten. Die Tatsache, dass Verbindung 49 und 52 beinahe die gleichen Geschwindigkeitskonstanten des ETs unabhängig von der Anzahl der Brückeneinheiten (n = 2, n = 3) besitzen, deutet darauf hin, dass ein Hopping-Prozess stattfindet, bei welchem eine geringere Längenabhängigkeit des ETs als bei eine Superexchange-Mechanismus zu erwarten ist. N2 - In this work the influence of “active” bridge units on the electron transfer (ET) mechanism within organic donor-bridge-electrode arrays in self-assembled monolayers (SAMs) was studied by spectroscopic and electrochemical methods. In the first part of this work ferrocenealkanethiols 1 – 3 and the ferrocenearylthiols 4, 5 were investigated to get experience in the monolayer preparation for measuring ET rates. Cyclic voltammetry of the monolayers indicates that homogeneously mixed monolayers containing redox active molecules and dummy molecules were formed. For the known ferrocenealkanethiols 1 – 3 the ET rates could be confirmed compared to the ones measured by Creager et al. [206]. As expected the ET rate decreases by increasing chain length of the alkane spacer from 2 to 3. Changing the bonding between the redox centre and the alkane spacer with the same bridge lenght, e. g. by using a carboxy-group in case of 1, does not influence the ET behaviour very strong. The aromatic ferrocenethiols 4 and 5 show very high ET rates due to the strong conjugated system although the distance between the redox centre and the electrode is comparable to the C8-alkyl compound 2. The electronic coupling factors all indicate a nonadiabatic ET between the redox centre and the electrode. As expected the electronic coupling factors increase with decreasing spacer length or with an enlarged conjugated system. To sum up, experience in monolayer preparation could be obtained, the measured ET rates for well known ferrocenealkane-compounds 1 - 3 could be verified and the information could be transferred to the conjugated systems 4 and 5. In the second part the triarylamine- 29, 32 and the phenothiazinealkanethiol 35 have been examined relative to their ET behaviour in mixed monolayers. The cyclic voltammograms of the diluted monolayers indicate that homogeneously formed monolayers are present. The ET rates of triarylamine- 29, 32 and phenothiazinealkanethiols 35 are 10 to 100 times higher than compared to ferrocenealkanethiols with equal chain length[183, 206], whereas in a [Ru(bpy)2(pp)]+-containing monolayer the same value was observed [177]. Almost two parameters influence the ET rate constant: the electronic coupling matrix element and the reorganisation energy  [209]. The ET rate in donor substituted alkanethiols is mainly influenced by the reorganisation energy  [177] and even small changes have a dramatic effect on the observed processes, therefore an increasing ET rate from the ferrocene (high reorganisation energy) over the phenothiazine 35 and the [Ru(bpy)2(pp)]+ to the triarylamine chromophores 29 and 32 (low reorganisation energy) is observed. Furthermore the bonding between the redox centres and the alkane spacer plays an important role on the ET rate in case of the triarylamines 29 and 32 opposite to the assumption made by Creager et al. that the connection does not play any role. For the electron rich ether connected compound 29 the ET is not only dominated by the reorganisation energy but also by mesomeric effects where the positive charge of the electron rich derivative 29 is more located at the ether function so that the chain is formally shortend by one atom resulting in higher ET rates than compared to 32. In the third part of the thesis a series of “molecular wires” consisting of methoxy- or chloro-substituted triarylamines and phenothiazines with different bridge units and bridge length between the redox centre and the anchor thiol function have been prepared in order to investigate their ET-behaviour. Cyclic voltammetry and UV/vis-spectroscopy show that the oxidation potential and the energetic states could be controlled very well by introducing different redox centres and bridge units resulting in a decreasing oxidation potential of the redox centres and a bathochromic shift of the absorption bands in the UV/vis-spectra. Also the densitiy of the chromophores in mixed monolayers could be controlled very well for only three compounds (49, 52 and 87) with nitrile-substituted bridges reliable ET rates could be obtained. In these chromophores the ET rate decreases by increasing the density of the redox active molecules in the mixed monolayers indicating that the adsorption geometry changes with coverage with the chromophores tilting to a more upright orientation as the surface becomes more crowded. For all other compounds the measurements were limited by the fast ET rates. Conformational, as well as a very weak distance dependence of the ET resulting in very high ET rates [172] or unfavourable HOMO-LUMO energies of the donor, bridge and the electrode are reasons for this behaviour. The fact that compound 49 shows almost the same rate constant independent of the length (n = 2 or n = 3) may indicate that a hopping process is operating for which a much weaker length dependence is expected than in the case of a superexchange. KW - Monoschicht KW - Selbstorganisation KW - Triarylamine KW - Gold KW - Elektronentransfer KW - Chromophor KW - selbst organisierende Monolagen (SAM) KW - Gold KW - Elektronentransfer KW - Triarylamin KW - Chromophore KW - self-assembled monolayer (SAM) KW - gold KW - electron transfer KW - triarylamine Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-15892 ER - TY - THES A1 - Röger, Cornelia T1 - Bioinspired Light-Harvesting Zinc Chlorin Rod Aggregates Powered by Peripheral Chromophores T1 - Bioinspirierte lichtsammelnde Zinchlorin-Stabaggregate N2 - Artificial light-harvesting (LH) systems have been obtained by self-assembly of naphthalene diimide-functionalized zinc chlorin dyads and triad in nonpolar, aprotic solvents. UV-vis, CD, and steady-state emission spectroscopy as well as atomic force microscopy showed that rod-like structures are formed by excitonic interactions of zinc chlorin units, while the appended naphthalene diimide dyes do not aggregate at the periphery of the cylinders. In all cases, photoexcitation of the enveloping naphthalene diimides at 540 and 620 nm, respectively, was followed by highly efficient energy-transfer processes to the inner zinc chlorin backbone, as revealed by time-resolved fluorescence spectroscopy on the picosecond time-scale. As a consequence, the LH efficiencies of zinc chlorin rod aggregates were increased by up to 63%. The effective utilization of solar energy recommends these biomimetic systems for an application in electronic materials on the nanoscale. N2 - In der vorliegenden Arbeit werden selbstorganisierte Lichtsammelsysteme auf der Basis von Napthalinbisimid-funktionalisierten Zinkchlorinen beschrieben. KW - Farbstoff KW - Scheibe-Aggregat KW - Naphthalinbisimid KW - Chlorin KW - Selbstorganisation KW - Lichtsammelsystem KW - Energietransfer KW - naphthalene diimide KW - chlorin KW - self-assembly KW - light harvesting KW - energy transfer Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26760 ER - TY - THES A1 - Chen, Zhijian T1 - pi-Stacks Based on Self-Assembled Perylene Bisimides : Structural, Optical, and Electronic Properties T1 - pi-Stapel von selbstaggregierten Perylenbisimiden : Strukturelle, Optische und Electronische Eigenschaften N2 - As a traditional industrial pigment, perylene bisimide (PBI) dyes have found wide-spread applications. In addition, PBI dyes have been considered as versatile and promising functional materials for organic-based electronic and optic devices, such as transistors and solar cells. For these novel demands, the control of self-organization of this type of dye and the investigation of the relationship between the supramolecular structure and the relevant optical and electronic properties is of great importance. The objective of this thesis focuses on gaining a better understanding of structural and functional properties of pi-stacks based on self-assembling PBIs. Studies include the synthesis and characterization of new functional PBI dyes, their aggregation in solution, in liquid crystalline state and on surfaces, and their fluorescence and charge transport properties. An overview of the formation, thermodynamics and structures of pi-stacks of functional pi- conjugated molecules in solution and in liquid crystalline phases is given in Chapter 2. Chapters 3 and 4 deal with the pi-pi aggregates of new, highly fluorescent PBIs without core-substituents. In Chapter 3, the self-assembly of a PBI with tridodecylphenyl substituents at imide N atoms both in solution and condensed phase has been studied in great detail. In condensed state, the dye exhibits a hexagonal columnar liquid crystalline (LC) phase as confirmed by DSC, OPM and X-ray diffraction analysis. The columnar stacking of this dye has been further confirmed by atomic force microscopy (AFM) where single columns could be well resolved The charge transport properties this dye have been investigated by pulse radiolysis-time resolved microwave conductivity (PR-TRMC) measurements. To shed more light on the nature of the pi-pi interaction of the unsubstituted PBIs, solvent depend aggregation properties have been investigated in Chapter 4. The studies are further extended from core-unsubstituted PBIs to core-substituted ones (Chapter 5 and 6). In Chapter 5, a series of highly soluble and fluorescent core-twisted PBIs that bear the same trialkylphenyl groups at the imide positions but different bay-substituents and were synthesized. These compounds are characterized by distortions of the perylene planes with dihedral angles in the range of 15-37° according to crystallographic data and molecular modeling studies. In contrast to the extended oligomeric aggregates formed for planar unsubstituted PBIs, this family of dyes formed discrete pi-pi-stacked dimers in apolar methylcyclohexane as concentration-dependent UV/Vis measurements and VPO analysis revealed. The Gibbs free energy of dimerization can be correlated with the twist angles of the dyes linearly. In condensed state, several of these PBIs form luminescent rectangular or hexagonal columnar liquid crystalline phases with low isotropization temperatures. The core-twisting effect on semiconducting properties has been examined in Chapter 6. In this chapter, a comparative study of the electrochemical and the charge transport properties of a series of non-substituted and chlorine-functionalized PBIs was performed. While Chapters 3-6 focus on one-component dye systems, Chapter 7 explored the possibility of a supramolecular engineering of co-aggregates formed by hydrogen-bonded 2:1 and 1:1 complex of oligo(p-phenylene vinylene)s (OPVs) and PBIs. Covalently linked donor-acceptor dye arrays have been prepared for comparison. Concentration and temperature-dependent UV/Vis spectroscopy revealed all hydrogen-bonded and covalent systems form well-ordered J-type aggregates in methylcyclohexane. With these hydrogen-bonded OPV-PBI complexes, fibers containing p-type and n-type molecules can be prepared on the nano-scale (1-20 nm). For the 2:1 OPV-PBI hydrogenbonded arrays hierarchically assembled chiral superstructures consisting of left-handed helical pi-pi co-aggregates (CD spectroscopy) of the two dyes that further assemble into right-handed nanometer-scale supercoils in the solid state (AFM study) have been observed. All of these well-defined OPV-PBI assemblies presented here exhibit photoinduced electron transfer on sub-ps timescale, while the electron recombination differs for different systems.Thus, it was suggested that such assemblies of p- and n-type semiconductors might serve as valuable nanoscopic functional units for organic electronics. N2 - Als traditionsreiches in industriellem Maßstab produziertes Pigment finden Perylenbisimid (PBI)-Farbstoffe Verwendung in vielen verschiedenen Anwendungsgebieten. Außerdem sind diese Farbstoffe aufgrund ihrer vielseitigen funktionellen Eigenschaften aussichtsreiche Kandidaten für auf organischen Materialen basierende elektronische und optische Einheiten, wie z.B. Transistoren oder Solarzellen. Für diese neuen Herausforderungen ist die gezielte Kontrolle bzw. Steuerung der Selbstorganisation dieser Farbstofftypen sowie die Erforschung des Zusammenhangs zwischen der supramolekularen Struktur und den optischen und elektronischen Eigenschaften von großem Interesse. Ziel dieser Arbeit war es daher, ein besseres Verständnis für strukturelle und funktionelle Eigenschaften pi-gestapelter Chromophore am Beispiel selbst-aggregierender PBI-Farbstoffe zu entwickeln. Dies umfaßt die Synthese und die Charakterisierung neuer funktioneller PBI-Farbstoffe, die Untersuchung ihrer Aggregate in Lösung, in flüssigkristallinen Phasen, Dünnschichten auf verschiedenen Oberflächen, sowie der Fluoreszenz- und Ladungsträgertransporteigenschaften. Ein Überblick über den Selbstaggregationsprozess, die thermodynamischen Eigenschaften und die Strukturen von pi-Stapeln verschiedener funktioneller pi-konjugierter Moleküle in Lösung und in flüssigkristallinen Phasen wird in Kapitel 2 gegeben. Kapitel 3 und 4 beschäftigen sich mit den pi-pi-Aggregaten neuartiger, stark fluoreszierender PBIs ohne Kernsubstituenten. In Kapitel 3 wurde das Aggregationsverhalten eines PBIs mit Tridodecylphenyl-Substituenten an den Imid-N-Atomen sowohl in Lösung als auch in der kondensierten Phase sehr detailiert untersucht. In der kondensierten Phase wurde eine kolumnar-hexagonale flüssigkristalline (LC) Phase mittels Differenzialkalorimetrie (DSC), optischer Polarisationsmikroskopie und Pulverröntgendiffraktometrie nachgewiesen. Die eindimensionale Stapelanordnung wurde zudem mittels Rasterkraftmikroskopie (AFM) bestätigt, welche ausgedehnte kolumnare Strukturen ergaben. Die Ladungstransporteigenschaften dieses Farbstoffes wurden mittels „pulse radiolysis-time resolved microwave“ (PR-TRMC) Experimenten untersucht. Zur weiteren Aufklärung der Natur der pi-pi-Interaktion des unsubstituierten PBI wurden in Kapitel 4 die lösungsmittelabhängigen Eigenschaften untersucht. Die Studien wurden zudem ausgedehnt von kernunsubstituierten auf kernsubstituierte PBIFarbstoffe. In Kapitel 5 werden die Synthesen einer Reihe sehr gut löslicher, fluoreszierender, nichtplanarer PBI-Farbstoffe vorgestellt, welche dieselben Trialkylphenylimidisubstituenten, jedoch unterschiedliche Bay-Substituenten tragen. Für diese Substanzen wurden mittels kristallographischer Daten sowie quantenchemischer Berechnungen Diederwinkelwinkel im Bereich 15 bis 37° ermittelt. Im Gegensatz zu den ausgedehnten oligomeren Aggregaten des planaren PBI bildet diese Farbstoffklasse aufgrund der Verdrillung des aromatischen Kerns in apolaren Lösungsmitteln wie Methylcyclohexan diskrete pi-pi-gestapelte Dimere. Die Freie Enthalpie für die Dimerisierung korreliert dabei linear mit dem Verdrillungswinkel. In der kondensierten Phase bilden einige dieser PBI-Farbstoffe fluoreszierende, rektangulare bzw. hexagonale kolumnare LC Phasen mit niedrigen Klärtemperaturen. In Kapitel 6 wurden die Auswirkungen des Verdrillungswinkels auf die Halbleitereigenschaften untersucht. Es wurden vergleichende Studien der elektrochemischen Eigenschaften sowie der Ladungsträgertransporteigenschaften einer Serie unsubstituierter und chlorfunktionalisierter PBI-Farbstoffe durchgeführt. Während in Kapitel 3-6 der Fokus auf Einkomponenten-Farbstoffaggregaten lag, wurde in Kapitel 7 die Möglichkeiten einer supramolekularer Anordnung von Co-Aggregaten untersucht, welche durch wasserstoffbrückengebundene 2:1 und 1:1 Komplexe zwischen Oligo(p-phenylenevinylenen) (OPVs) und PBIs aufgebaut sind. Mit diesen wasserstoffbrückengebundenen OPV-PBI Komplexen lassen sich eindimensionale Aggregate auf der Nanoskala erzeugen, welche aus p- und n-halbleitenden Molekülen bestehen. Für die wasserstoffbrückengebundenen 2:1 OPV-PBI Komplexe wurden Anordnungen beobachtet, welche chirale Überstrukturen mit links-drehenden, helicalen pi-pi- Co-Aggregaten (CD-Spectroscopie) aufweisen, die sich wiederum in rechts-drehenden Superhelices bündeln (AFM-Studien). Während für alle OPV-PBI Aggregate photoinduzierte Elektronentransferprozesse im subps Zeitskalenbereich beobachtet wurden, unterschieden sich die Rekombinationsraten je nach System beträchtlich. Somit ist diese Art von organisierten nanoskopischen p- und n-halbleitenden funktionellen. Bausteinen aussichtsreich für verschiedene Anwendungen in der Organischen Elektronik. KW - Perylenderivate KW - Farbstoff KW - Flüssigkristall KW - Selbstorganisation KW - Perylenbisimiden KW - selbstaggregierten KW - Flüssigkristall KW - Farbstoff KW - perylene bisimide KW - self-assembly KW - liquid crystal KW - functional dyes Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-19940 ER - TY - THES A1 - Lohr, Andreas T1 - Self-Assembly of Merocyanines : Thermodynamic and Kinetic Insights into the Formation of Well-Defined Dye Aggregates T1 - Selbstorganisation von Merocyaninen : Thermodynamische und Kinetische Einblicke in die Bildung definierter Farbstoffaggregate N2 - The present thesis demonstrates the potential of dipolar aggregation of merocyanine dyes as novel directional and specific supramolecular binding motif for the creation of more elaborate supramolecular architectures beyond simple dimers. Furthermore, the self-assembly studies into bis(merocyanine) nanorods gave new insights into the kinetics of morphogenesis in supramolecular aggregates. N2 - In der vorliegenden Arbeit konnte das Potential der dipolaren Aggregation von Merocyaninfarbstoffen als neuartiges, gerichtetes und spezifisches Bindungsmotif zum Aufbau wesentlich komplexerer supramolekularer Architekturen als einfachen Dimeren aufgezeigt werden. Desweiteren lieferten Studien zur Selbstorganisation von Bis(merocyanin)-Nanostäbchen neue Erkenntnisse zur Morphogenese supramolekularer Aggregate. KW - Supramolekulare Chemie KW - Selbstorganisation KW - Farbstoff KW - Kinetik KW - Merocyanin KW - H-Aggregate KW - Nanostrukturen KW - Chiralität KW - Merocyanine KW - H-Aggregate KW - Nanostructure KW - Chirality Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28964 ER - TY - THES A1 - Shao, Changzhun T1 - Programming Self-assembly: Formation of Discrete Perylene Bisimide Aggregates T1 - Steuerung der Selbstassemblierung: Aufbau der diskreten Perylenbisimid-Aggregaten N2 - The objective of this thesis focuses on the development of strategies for precise control of perylene bisimide (PBI) self-assembly and the in-depth elucidation of structural and optical features of discrete PBI aggregates by means of NMR and UV/Vis spectroscopy. The strategy for discrete dimer formation of PBIs is based on delicate steric control that distinguishes the two facets of the central perylene surface. The strategy applied in this thesis for accessing discrete PBI quadruple and further oligomeric stacks relies on backbone-directed PBI self-assembly. For this purpose, two tweezer-like PBI dyads bearing the respective rigid backbones, diphenylacetylene (DPA) and diphenylbutydiyne (DPB), were synthesized. The distinct aggregation behavior of these structurally similar PBI dyads can be ascribed to the intramolecular distance between the two PBI chromophores imparted by the DPA and DPB spacers. N2 - Das Ziel dieser Arbeit ist die Entwicklung von Strategien für die präzise Steuerung der PBI-Selbstorganisation sowie die gründliche Aufklärung der strukturellen und optischen Eigenschaften von diskreten PBI-Aggregaten mittels NMR- und UV/Vis-Spektroskopie. Die Strategie der diskreten Dimerbildung von PBIs ist auf der empfindlichen sterischen Kontrolle begründet, die eine Differenzierung der beiden Facetten der zentralen Perylenoberfläche ermöglicht. Um diskrete vierfache und höhere oligomere PBI-Stapel zu erhalten, behilft sich die vorliegende Arbeit der PBI-Selbstorganisation, die durch ein Rückgrat vermittelt wird. Zu diesem Zweck wurden zwei pinzettenartige PBI-Dyaden synthetisiert, die die starren Rückgrate Diphenylacetylen (DPA) bzw. Diphenylbutydiyn (DPB) tragen (Abbildung 2). Das unterschiedliche Aggregationsverhalten dieser strukturell ähnlichen PBI-Dyaden kann den verschiedenen intramolekularen Abständen der beiden PBI-Chromophore zugeschrieben werden, die durch DPA bzw. DPB als Abstandshalter vorgegeben werden. KW - Farbstoff KW - perylene bisimide KW - self-assembly KW - dimer KW - Perylenderivate KW - Selbstorganisation Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69298 ER - TY - THES A1 - Li, Xueqing T1 - Hydrogen Bond-directed Self-assembly of Perylene Bisimide Organogelators N2 - Perylene bisimide (PBI) dyes are a widely used class of industrial pigments, and currently have gained significant importance for organic-based electronic and optical devices. Structural modification at the PBI core results in changes of the optical and electronic properties, which enable tailored functions. Moreover, the aggregation behavior of PBIs is alterable and controllable to achieve new materials, among which organogels are of particular interest because of their potential for applications as supramolecular soft materials. In this work, new PBI-based organic gelators were designed, synthesized, and characterized, and the aggregation behaviors under different conditions were intensively studied by various spectroscopic and microscopic methods. In chapter 2, a brief overview is given on the structural and functional features of organogel systems. The definition, formation and reversibility of organogels are introduced. Some examples on dye based organogel are selected, among which PBI-based organogelators reported so far are especially emphasized. Some basic knowledges of supramolecular chirality are also overviewed such as characterization, amplification, and symmetry breaking of the chiral aggregates. According to our former experiences, PBIs tend to form aggregates because the planer aromatic cores interact with one another by pi-pi interaction. In chapter 3, a new PBI molecule is introduced which possesses amide groups between the conjugated core and periphery alkyl chains. It is found that well oriented aggregates are formed by hydrogen bonding and the pi-pi interaction of the cores. These interactions enable the aggregates to grow in one-dimension forming very long fibers, and these fibers further intercross to 3D network structures, e.g., organogels. In comparison to the very few PBI-based gelators reported before, one advantage of this gelator is that, it is more versatile and can gelate a wide range of organic solvents. Moreover, the well-organized fibers that are composed of extended π-stacks provide efficient pathways for n-type charge carriers. Interestingly, AFM studies reveal that the PBI molecules form well-defined helical fibers in toluene. Both left-handed (M) and right-handed (P) helicities can be observed without any preference for one handedness because the building block is intrinsically achiral. In chapter 4, we tried to influence the M/P enantiomeric ratio by applying external forces. For example, we utilized chiral solvents to generate chiral aggregates with a preferential handedness. AFM analysis of the helices showed that a enantiomeric ratio of about 60: 40 can be achieved by aggregation in chiral solvents R- or S-limonene. Moreover, the long aggregated fibres can align at macroscopic level in vortex flows upon rotary stirring In chapter 5, bulky tetra-phenoxy groups are introduced in the bay area of the PBI gelator. The conjugated core of the new molecule is now distorted because of the steric hindrance. UV/Vis studies reveal a J-type aggregation in apolar solvents like MCH due to intermolecular pi-pi-stacking and hydrogen-bonding interactions. Microscopic studies reveal formation of columnar aggregates in apolar solvent MCH, thus this molecule lacks the ability to form gels in this solvent, but form highly fluorescent lyotropic mesophases at higher concentration. On the other hand, in polar solvents like acetone and dioxane, participation of the solvent molecules in hydrogen bonding significantly reduced the aggregation propensity but enforced the gel formation. The outstanding fluorescence properties of the dye in both J-aggregated viscous lyotropic mesophases and bulk gel phases suggest very promising applications in photonics, photovoltaics, security printing, or as fluorescent sensors. In chapter 6, we did some studies on combining PBI molecules with inorganic gold nanorods. Gold nanorods were synthesized photochemically. By virtue of the thioacetate functionalized PBIs, the rods were connected end to end to form gold nanochains, which were characterized by absorption spectra and TEM measurement. Such chromophore-nanorod hybrids might be applied to guide electromagnetic radiation based on optical antenna technology. KW - Perylenderivate KW - Selbstorganisation KW - Wasserstoffbrückenbindung KW - Gelieren KW - Supramolekulare Struktur KW - organogelator KW - perylene bisimide KW - self-assembly Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-43727 ER - TY - THES A1 - Dhara, Ayan T1 - Stimuli-Responsive Self-Assembly and Spatial Functionalization of Organic Cages Based on Tribenzotriquinacenes T1 - Stimuli-responsive Selbstorganisation und räumliche Funktionalisierung organischer Käfige auf Basis von Tribenzotriquinacenen N2 - Within this thesis, synthetic strategies for self-assembled organic cage compounds have been developed that allow for both stimuli-responsive control over assembly/disassembly processes and spatial control over functionalization. To purposefully operate the reversible assembly of organic cages, boron-nitrogen dative bonds have been exploited for the formation of a well-defined, discrete bipyramidal organic assembly in solution. Thermodynamic association equilibria for cage formation have been investigated by Isothermal Titration Calorimetry (ITC). Temperature-dependent NMR studies revealed a reversible cage opening upon heating and quantitative reassembly upon cooling. For the spatial functionalization of organic cages, two divergent molecular building units have been designed and synthesized, namely tribenzotriquinacene derivatives possessing a terminal alkyne moiety at the apical position and a meta-diboronic acid having a pyridyl group at the 2-position. Facile access to a variety of apically functionalized tribenzotriquinacenes has been illustrated by post-synthetic modifications at the terminal alkyne group by Sonogashira cross-coupling and azide-alkyne click reactions. Finally, these apically functionalized tribenzotriquinacene building blocks have been implemented into boronate ester-based organic cage compounds showing modular exohedral functionalities. N2 - Im Rahmen dieser Dissertation wurden Synthesiestrategien für selbstorganisierte organische Käfigstrukturen entwickelt, die eine stimuli-responsive Kontrolle über den Auf- und Abbau sowie eine räumliche Kontrolle über die Funktionalisierung dieser Nanostrukturen erlauben. Um den Assemblierungsprozess organischer Käfige gezielt zu steuern, wurden dative Bor-Stickstoff-Bindungen für die Bildung eines wohldefinierten, diskreten, bipyramidalen organischen Käfigs in Lösung eingesetzt. Die thermodynamischen Assoziationsleichgewichte für die Käfigbildung wurden durch isotherme Titrationskalorimetrie (ITC) tersucht. Temperaturabhängige NMR-Studien zeigten eine reversible Käfigöffnung beim Erwärmen und die quantitative Wiedergewinnung des Käfigs beim Abkühlen. Für die räumliche Funktionalisierung organischer Käfige wurden zwei divergente molekulare Bausteine entworfen und synthetisiert: Zum Einen Tribenzotriquinacen-Derivate die eine terminale Alkinfunktion an der apikalen Position aufweisen und zum Anderen eine meta-Diboronsäure mit einer Pyridylgruppe in 2-Position. Der einfache Zugang zu einer Vielzahl an apikal funktionalisierten Tribenzotriquinacenen wurde durch postsynthetische Modifizierungen der terminalen Alkineinheit durch Sonogashira-Kreuzkupplungen und Azid-Alkin-Klick-Reaktionen veranschaulicht. Schließlich wurden diese apikal funktionalisierten Tribenzotriquinacen-Bausteine in organische Boronatester-Käfige mit modularer exohedraler Funktionalität implementiert. KW - Selbstorganisation KW - Bor-Stickstoff-Verbindungen KW - Käfigverbindungen KW - Self-assembly KW - Selbstassemblierung KW - Cage KW - Boron-Nitrogen Dative Bond Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154762 ER - TY - THES A1 - Klotzbach [verh. Fimmel], Stefanie T1 - Synthese und Charakterisierung kovalent organischer Käfigverbindungen basierend auf Tribenzotriquinacen-Einheiten T1 - Synthesis and Characterization of Covalent Organic Cage Compounds based on Tribenzotriquinacenes N2 - Porous functional materials are promising candidates for applications in the areas of heterogeneous catalysis, sensing, gas storage and separation, or membranes. As one class of suchlike materials, organic cage compounds have attracted attention because of their unique properties compared to extended frameworks. The tribenzotriquinacene (TBTQ) scaffold possessing three orthogonal indane moieties provides a suitable building block for the efficient synthesis of organic cage compounds. In this thesis the synthesis of molecular cubes, tetrahedra and bipyramids by crosslinking the catechol units of TBTQ with various diboronic acids is reported. Structure and shape of the molecular objects are thereby determined by the geometry of the diboronic acids. Notably, both narcissistic and social self-sorting phenomena could be observed for ternary mixtures of building blocks. In addition host-guest complexation was observed for the trigonal bipyramid cage. Fullerenes C60 as well as C70 were almost quantitively encapsulated. Further investigations of this behaviour showed a preference for C60 in a competitive situation. N2 - Poröse funktionelle Materialien sind vielversprechende Kandidaten für Anwendungen wie zum Beispiel in der heterogenen Katalyse, in Sensormaterialien, für die Gasspeicherung sowie –separation oder in Membranen. Eine besondere Klasse solcher Materialien stellen die organischen Käfigverbindungen dar, da sie im Vergleich zu netzwerkartigen Strukturen einzigartige Eigenschaften aufweisen. Das Gerüst des Tribenzotriquinacens (TBTQ) besitzt drei zueinander orthogonal stehende Indaneinheiten, sodass es sich optimal als Baustein für die effiziente Synthese organischer Käfigmoleküle eignet. In dieser Arbeit wird die Synthese molekularer Würfel, Tetraeder und Bipyramiden mittels Quervernetzung der Catecholeinheiten der TBTQ-Bausteine mit verschiedenen Diboronsäuren beschrieben. Die Struktur und die Form der molekularen Objekte sind dabei durch die Geometrie der entsprechenden Diboronsäuren vorgegeben. Bemerkenswert ist, dass in ternären Mischungen der Bausteine das Phänomen der Selbssortierung zu beobachten ist. Sowohl narzisstische als auch soziale Selbstsortierung konnte hierbei festgestellt werden. Darüber hinaus wurde für den bipyramidalen Käfig Wirt-Gast Komplexierung beobachtet. Die Fullerene C60 und C70 wurden nahezu quantitativ in das Molekül eingeschlossen. Weitere Untersuchungen zu diesem Verhalten zeigten in einer kompetitiven Mischung aus C60 und C70 eine Präferenz des Käfigmoleküls zu C60. KW - Käfigverbindungen KW - Selbstorganisation KW - Tribenzotriquinacen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-166034 ER - TY - THES A1 - Kaufmann, Christina T1 - Discrete Supramolecular Architectures of Bay-linked Perylene Bisimide Dimers by Self-Assembly and Folding T1 - Diskrete supramolekulare Architekturen bucht-verknüpfter Perylenbisimid Dimere durch Selbstassemblierung und Faltung N2 - Supramolecular self-assembly of perylene bisimide (PBI) dyes via non-covalent forces gives rise to a high number of different PBI architectures with unique optical and functional properties. As these properties can be drastically influenced by only slightly structural changes of the formed supramolecular ensembles (Chapter 2.1) the controlled self-assembly of PBI dyes became a central point of current research to design innovative materials with a high potential for different applications as for example in the fields of organic electronics or photovoltaics. As PBI dyes show a strong tendency to form infinite aggregated structures (Chapter 2.2) the aim of this thesis was to precisely control their self-assembly to create small, structurally well-defined PBI assemblies in solution. Chapter 2.3 provides an overview on literature known strategies that were established to realize this aim. It could be demonstrated that especially backbone-directed intra- and intermolecular self-assembly of covalently linked Bis-PBI dyes evolved as one of the most used strategies to define the number of stacked PBI chromophores by using careful designed spacer units with regard to their length and flexibility. By using conventional spectroscopic methods like UV/Vis and fluorescence experiments in combination with NMR measurements an in-depth comparison of the molecular and optical properties in solution both in the non-stacked and aggregated state of the target compounds could be elucidated to reveal structure-property relationships of different PBI architectures. Thus, it could be demonstrated, that spacer units that pre-organize two PBI chromophores with an inter-planar distance of r < 7 Å lead to an intramolecular folding, whereas linker moieties with a length between 7 to 11 Å result in an intermolecular self-assembly of the respective Bis-PBIs dyes via dimerization to form well-defined quadruple PBI pi-stacks. Hence, if the used spacer units ensure an inter-planar distance r > 14 Å larger oligomeric PBI pi-stacks are generated. In Chapter 4 a detailed analysis of the exciton coupling in a highly defined H-aggregate quadruple PBI pi-stack is presented. Therefore, bay-tethered PBI dye Bis-PBI 1 was investigated by concentration-dependent UV/Vis spectroscopy in THF and toluene as well as by 2D-DOSY-NMR spectroscopy, ESI mass spectrometry and AFM measurements confirming that Bis-PBI 1 self-assembles exclusively into dimers with four closely pi-stacked PBI chromophores. Furthermore, with the aid of broadband fluorescence upconversion spectroscopy (FLUPS) ensuring broadband detection range and ultrafast time resolution at once, ultrafast Frenkel exciton relaxation and excimer formation dynamics in the PBI quadruple pi-stack within 1 ps was successfully investigated in cooperation with the group of Dongho Kim. Thus, it was possible to gain for the first time insights into the exciton dynamics within a highly defined synthetic dye aggregate beyond dimers. By analysing the vibronic line shape in the early-time transient fluorescence spectra in detail, it could be demonstrated that the Frenkel exciton is entirely delocalized along the quadruple stack after photoexcitation and immediately loses its coherence followed by the formation of the excimer state. In Chapter 5 four well-defined Bis-PBI folda-dimers Bis-PBIs 2-4 were introduced, where linker units of different length (r < 7 Å) and steric demand were used to gain distinct PBI dye assemblies in the folded state. Structural elucidation based on in-depth UV/Vis, CD and fluorescence experiments in combination with 1D and 2D NMR studies reveals a stacking of the two PBI chromophores upon folding, where geometry-optimized structures obtained from DFT calculations suggest only slightly different arrangements of the PBI units enforced by the distinct spacer moieties. With the resulting optical signatures of Bis-PBIs 2-4 ranging from conventional Hj-type to monomer like absorption features, the first experimental proof of a PBI-based “null-aggregate” could be presented, in which long- and short-range exciton coupling fully compensate each other. Hence, the insights of this chapter pinpoint the importance of charge-transfer mediated short-range exciton coupling that can significantly influence the properties of pi-stacked PBI chromophores In the last part of this thesis (Chapter 6), spacer-controlled self-assembly of four bay-linked Bis-PBI dyes Bis-PBIs 5-8 into well-defined supramolecular architectures was investigated, where the final aggregate structures are substantially defined by the nature of the used spacer units. By systematically extending the backbone length from 7 to 15 Å defining the inter-planar distance between the tethered chromophores, different assemblies from defined quadruple PBI pi-stacks to larger oligomeric pi-stacks could be gained upon aggregation. In conclusion, the synthesis of nine covalently linked PBI dyes in combination with a detailed investigation of their spacer-mediated self-assembly behaviour in solution concerning structure-properties-relationships was presented within this thesis. The results confirm a strong exciton coupling in different types of Bis-PBI architectures e.g. folda-dimers or highly defined quadruple pi-stacks, which significantly influences their optical properties upon self-assembly. N2 - Supramolekulare Selbstorganisationsprozesse von Perylenbisimid-(PBI)-Farbstoffen über nichtkovalente Kräfte führen zu einer Vielzahl unterschiedlicher PBI-Aggregatstrukturen welche sich in ihren einzigartigen optischen und funktionellen Eigenschaften unterscheiden. Diese Eigenschaften können bereits durch leichte strukturelle Veränderungen der gebildeten supramolekularen Strukturen drastisch beeinflusst werden (Kapitel 2.1), was die kontrollierte Selbstassemblierung von PBI-Farbstoffen zu einem zentralen Punkt aktueller Forschungsarbeiten macht. Dadurch soll es ermöglicht werden, innovative Materialien zu generieren, welche ein hohes Potenzial für unterschiedlichste Anwendungen aufzeigen, wie z.B. im Bereich der organischen Elektronik oder Photovoltaik. Da PBI-Farbstoffe eine starke Tendenz zur Bildung ausgedehnter Aggregatstrukturen aufweisen (Kapitel 2.2), war das Ziel dieser Arbeit, kleine, hoch-definierte PBI-Stapel zu generieren, was über die kontrollierte Steuerung ihres Aggregationsverhaltens ermöglicht werden sollte. Kapitel 2.3 gibt dabei einen Überblick über die hierfür in der Literatur verwendeten Strategien. Dabei konnte gezeigt werden, dass vor allem eine intra- bzw. intermolekulare Organisation von kovalent-verknüpften Bis-PBI-Farbstoffen herangezogen wird, um die Anzahl der PBI-Chromophore innerhalb des Aggregates zu limitieren. Dies konnte unter anderem durch eine sorgfältige Auswahl der verwendeten Linker-Einheiten realisiert werden, vor allem hinsichtlich ihrer Länge und Flexibilität. Durch den Einsatz von UV/Vis-, Fluoreszenz- und NMR-Spektroskopie kann ein eingehender Vergleich der molekularen und optischen Eigenschaften der Farbstoffe in Lösung sowohl im monomeren als auch im aggregierten Zustand durchgeführt werden. So konnte gezeigt werden, dass Linker-Einheiten, welche zwei PBI-Chromophore mit einem interplanaren Abstand von r < 7 Å vororganisieren, zu einer intramolekularen Faltung der Bis-PBI-Farbstoffe führen, wohingegen Linker-Einheiten mit einer Länge zwischen 7 - 11 Å eine intermolekulare Selbstorganisation der jeweiligen Bis-PBI-Farbstoffe begünstigen. Gewährleistet die verwendete Linker-Einheit einen interplanaren Abstand r > 14 Å zwischen den beiden PBI-Einheiten, so kommt es zur Erzeugung größerer, oligomerer PBI-Farbstoff-Stapel. Im ersten Teil dieser Arbeit (Kapitel 4) wurde die Exzitonen-Kopplung in einem hochdefinierten PBI-Viererstapel untersucht. Zu diesem Zweck wurde Bis-PBI 1 synthetisiert, dessen Aggregationsverhalten anschließend mittels konzentrationsabhängiger UV/Vis-Spektroskopie in THF und Toluol sowie mittels 2D-DOSY-NMR-Spektroskopie, ESI-Massenspektrometrie und AFM-Messungen ermittelt werden konnte. Dadurch konnte die intermolekulare Dimerisierung von Bis-PBI 1 und damit die Ausbildung hoch-definierter PBI-Viererstapel nach erfolgter Aggregation bestätigt werden. In Zusammenarbeit mit der Gruppe von Dongho Kim konnten weiterhin mittels Femtosekunden-Breitband-Fluoreszenz-Aufkonversions-Spektroskopie (FLUPS) erstmals Einblicke in die Exzitonendynamik innerhalb eines hoch definierten synthetischen Farbstoffaggregats jenseits von Dimeren gewonnen werden. Durch die detaillierte Analyse der vibronischen Linienform der frühen transienten Fluoreszenzspektren konnte gezeigt werden, dass das anfänglich gebildete Frenkel-Exciton nach erfolgter Anregung vollständig entlang des gesamten Viererstaples delokalisiert ist. Der eindeutige Nachweis des initialen, vollständig delokalisierten Frenkel-Exziton-Zustandes und seiner Lokalisation, stellen wichtige Ergebnisse dieser Studie dar Der zweite Teil dieser Arbeit (Kapitel 5) befasste sich mit der Einführung von vier hoch-definierten Bis-PBI-Folda-Dimeren Bis-PBI 2-4, für deren Synthese Linker-Einheiten unterschiedlicher Länge (r < 7 Å) und Flexibilität verwendet wurden. So konnte jeweils eine leicht variierende Anordnung der PBI-Chromophore im gefalteten Zustand generiert werden. Durch die Strukturaufklärung auf Basis von eingehenden UV/Vis-, CD-, Fluoreszenz- und 1D- und 2D-NMR-Studien konnte für alle Farbstoffe Bis-PBIs 2-4 die Faltung zu diskreten pi-Stapeln gezeigt werden. Die aus DFT-Berechnungen gewonnenen geometrieoptimierten Strukturen lassen nur geringfügig unterschiedliche Anordnungen der PBI-Farnstoffe erkennen, welche durch die verschiedenen Linker-Einheiten verursacht werden. Durch die resultierenden optischen Signaturen der Folda-Dimere Bis-PBIs 2-4, welche vom konventionellen Hj-Aggregat bis hin zu monomerenähnlichen Absorptionsmerkmalen reichen, konnte erstmals der experimentelle Nachweis eines PBI-basierten "Null-Aggregats" erbracht werden, bei dem sich JCoul und JCT vollständig gegenseitig kompensieren. Die Erkenntnisse dieses Kapitels verdeutlichen daher den erheblichen Einfluss der sogenannte kurzreichweitigen Exzitonen-Kopplung JCT auf die optischen Eigenschaften von PBI-Aggregaten. Im letzten Teil dieser Arbeit (Kapitel 6) wurden die Selbstorganisationsprozesse in klar definierten supramolekularen Aggregatstrukturen untersucht. Durch die systematische Verlängerung der Linker-Einheiten von 7 auf 15 Å, konnten durch Selbstorganisation unterschiedliche Aggregatstrukturen von hochdefinierten PBI-Viererstapeln bis hin zu längeren PBI-Oligomeren generiert werden. Zusammenfassend wurde in dieser Arbeit eine detaillierte Übersicht des Selbstorganisationsverhaltens von neun kovalent verknüpften Bis-PBI-Farbstoffen vorgestellt, welche anschließend hinsichtlich ihrer Struktur-Eigenschafts-Beziehung untersucht wurden. Die Ergebnisse bestätigen eine starke Excitonen-Kopplung in verschiedenen Bis-PBI-Aggregaten wie z.B. PBI-Folda-Dimeren oder hochdefinierten PBI-Viererstapeln, welche die optischen Eigenschaften der Farbstoffsysteme im aggregierten Zustand signifikant beeinflusst. KW - Supramolekulare Chemie KW - Perylenderivate KW - Selbstorganisation KW - perylene bisimide dimers KW - folda-dimer KW - null-aggregate KW - exciton dynamics KW - short-range JCT-coupling KW - spacer-controlled self-assembly KW - Elektronentransfer KW - Farbstoff KW - NMR-Spektroskopie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173005 ER - TY - THES A1 - Sapotta, Meike T1 - Perylene Bisimide Cyclophanes: Recognition of Alkaloids, Aggregation Behavior in Aqueous Environment and Guest-Mediated Chirality Transfer T1 - Perylenbisimidcyclophane: Alkaloiderkennung, Aggregationsverhalten in wässriger Umgebung und gastvermittelter Chiralitätstransfer N2 - Inspired by the fact that sufficient solubility in aqueous media can be achieved by functional substitution of perylene bisimides (PBIs) with polar groups, one of the essential aims of this thesis was the design and successful synthesis of the new water-soluble PBI cyclophanes [2PBI]-1m and [2PBI]-1p, which are appended with branched, hydrophilic oligoethylene glycol (OEG) chains. Subsequently, the focus was set on the elucidation of properties of PBI cyclophane hosts which are also of relevance for recognition processes in biological systems. The performance of the new amphiphilic PBI cyclophane [2PBI]-1p as synthetic receptors for various natural aromatic alkaloids in aqueous media was thoroughly investigated. Alkaloids represent a prominent class of ubiquitous nitrogen containing natural compounds with a great structural variety and diverse biological activity. As of yet, no chromophore host acting as a molecular probe for a range of alkaloids such as harmine or harmaline is known. In addition, the self-association behavior of cyclophane host [2PBI]-1m and its reference monomer in water was studied in order to gain insights into the thermodynamic driving forces affecting the self-assembly process of these two PBI systems in aqueous environment. Moreover, the chirality transfer upon guest binding previously observed for a PBI cyclophane was investigated further. The assignment of the underlying mechanism of guest recognition to either the induced fit or conformational selection model was of particular interest. N2 - Diese Arbeit befasste sich mit der Erforschung neuer Eigenschaften von Perylenbisimid-cyclophanwirten, zum Beispiel der Gast-Komplexierung in wässriger Umgebung (Kapitel 3.2) oder dem Einfluss von Wasser beim Selbstassemblierungsprozess einer dieser Wirte in Wasser (Kapitel 3.3). Weiterhin wurden der Chiralitätstransfer durch Gasterkennung und das der Wirt-Gast-Komplexbildung zugrunde liegende mechanistische Modell untersucht (Kapitel 3.4). ... KW - Supramolekulare Chemie KW - Perylenderivate KW - Wirt-Gast-Beziehung KW - Host-Guest-Chemistry KW - Self-Assembly in Water KW - Chirality Transfer KW - Chiralität KW - Selbstorganisation KW - Organische Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200028 ER -