TY - JOUR A1 - Lehmann, Matthias A1 - Baumann, Maximilian A1 - Lambov, Martin A1 - Eremin, Alexey T1 - Parallel polar dimers in the columnar self‐assembly of umbrella‐shaped subphthalocyanine mesogens JF - Advanced Functional Materials N2 - The self-assembly of umbrella-shaped mesogens is explored with subphthalocyanine cores and oligo(thienyl) arms with different lengths in the light of their application as light-harvesting and photoconducting materials. While the shortest arm derivatives self-assemble in a conventional columnar phase with a single mesogen as a repeating unit, the more extended derivatives generate dimers that pile up into liquid crystalline columns. In contrast to the antiparallel arrangement known from single crystals, the present mesogens align as parallel dimers in polar columnar phases as confirmed by X-ray scattering, experimental densities, dielectric spectroscopy, second harmonic generation, alignment, and conductivity studies. UV–vis and fluorescence spectroscopies reveal a broad absorption in the visible range and only weak emission of the Q-band. Thus, these light-collecting molecules forming strongly polar columnar mesophases are attractive for application in the area of photoconductive materials. KW - umbrella-shaped mesogens KW - parallel polar dimers KW - subphthalocyanine KW - columnar phases KW - ferroelectrics KW - liquid crystal alignment KW - organic semiconductors Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-256343 VL - 31 IS - 38 ER - TY - THES A1 - Sapotta, Meike T1 - Perylene Bisimide Cyclophanes: Recognition of Alkaloids, Aggregation Behavior in Aqueous Environment and Guest-Mediated Chirality Transfer T1 - Perylenbisimidcyclophane: Alkaloiderkennung, Aggregationsverhalten in wässriger Umgebung und gastvermittelter Chiralitätstransfer N2 - Inspired by the fact that sufficient solubility in aqueous media can be achieved by functional substitution of perylene bisimides (PBIs) with polar groups, one of the essential aims of this thesis was the design and successful synthesis of the new water-soluble PBI cyclophanes [2PBI]-1m and [2PBI]-1p, which are appended with branched, hydrophilic oligoethylene glycol (OEG) chains. Subsequently, the focus was set on the elucidation of properties of PBI cyclophane hosts which are also of relevance for recognition processes in biological systems. The performance of the new amphiphilic PBI cyclophane [2PBI]-1p as synthetic receptors for various natural aromatic alkaloids in aqueous media was thoroughly investigated. Alkaloids represent a prominent class of ubiquitous nitrogen containing natural compounds with a great structural variety and diverse biological activity. As of yet, no chromophore host acting as a molecular probe for a range of alkaloids such as harmine or harmaline is known. In addition, the self-association behavior of cyclophane host [2PBI]-1m and its reference monomer in water was studied in order to gain insights into the thermodynamic driving forces affecting the self-assembly process of these two PBI systems in aqueous environment. Moreover, the chirality transfer upon guest binding previously observed for a PBI cyclophane was investigated further. The assignment of the underlying mechanism of guest recognition to either the induced fit or conformational selection model was of particular interest. N2 - Diese Arbeit befasste sich mit der Erforschung neuer Eigenschaften von Perylenbisimid-cyclophanwirten, zum Beispiel der Gast-Komplexierung in wässriger Umgebung (Kapitel 3.2) oder dem Einfluss von Wasser beim Selbstassemblierungsprozess einer dieser Wirte in Wasser (Kapitel 3.3). Weiterhin wurden der Chiralitätstransfer durch Gasterkennung und das der Wirt-Gast-Komplexbildung zugrunde liegende mechanistische Modell untersucht (Kapitel 3.4). ... KW - Supramolekulare Chemie KW - Perylenderivate KW - Wirt-Gast-Beziehung KW - Host-Guest-Chemistry KW - Self-Assembly in Water KW - Chirality Transfer KW - Chiralität KW - Selbstorganisation KW - Organische Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200028 ER - TY - THES A1 - Michail, Evripidis T1 - Design and Development of a Two-Photon Absorption Induced Fluorescence Spectrometer and the Investigation of Nonlinear Optical Properties of Organic Chromophores T1 - Aufbau und Entwicklung eines Zwei-Photonen-Absorptions-induzierten Fluoreszenzspektrometers und Untersuchung der nichtlinearen optischen Eigenschaften organischer Chromophore N2 - Main objectives of the present dissertation can be divided in two parts. The first part deals with setting up a spectroscopic technique for reliable and accurate measurements of the two-photon absorption (2PA) cross section spectra. In the second part, this firmly established experimental technique together with conventional spectroscopic characterization, quantum-chemical computations and theoretical modelling calculations was combined and therefore used as a tool to gain information for the so-called structure-property relationship through several molecular compounds. N2 - Die Hauptziele der vorliegenden Dissertation lassen sich in zwei Teile gliedern. Der erste Teil befasst sich mit dem Aufbau einer spektroskopischen Technik zur zuverlässigen und genauen Messung der Zwei-Photonen-Absorptionsquerschnittsspektren (2PA). Im zweiten Teil wurde diese fest etablierte experimentelle Technik zusammen mit konventioneller spektroskopischer Charakterisierung, quantenchemischen Berechnungen und theoretischen Modellrechnungen kombiniert und damit als Werkzeug genutzt, um über mehrere molekulare Verbindungen Informationen für die sogenannte Struktur-Eigenschafts-Beziehung zu gewinnen. KW - Nonlinear Optical Properties of Organic Materials KW - Two-photon absorption KW - Spectroscopy KW - Non-linear optics KW - Fluoreszenzspektrometer KW - Zweiphotonenabsorption Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-242185 ER - TY - CHAP A1 - Liaqat, Anam A1 - Sednev, Maksim V. A1 - Höbartner, Claudia T1 - In Vitro Selection of Deoxyribozymes for the Detection of RNA Modifications T2 - Ribosome Biogenesis: Methods and Protocols N2 - Deoxyribozymes are artificially evolved DNA molecules with catalytic abilities. RNA-cleaving deoxyribozymes have been recognized as an efficient tool for detection of modifications in target RNAs and provide an alternative to traditional and modern methods for detection of ribose or nucleobase methylation. However, there are only few examples of DNA enzymes that specifically reveal the presence of a certain type of modification, including N6-methyladenosine, and the knowledge about how DNA enzymes recognize modified RNAs is still extremely limited. Therefore, DNA enzymes cannot be easily engineered for the analysis of desired RNA modifications, but are instead identified by in vitro selection from random DNA libraries using synthetic modified RNA substrates. This protocol describes a general in vitro selection stagtegy to evolve new RNA-cleaving DNA enzymes that can efficiently differentiate modified RNA substrates from their unmodified counterpart. KW - RNA KW - deoxyribozymes KW - modified RNA nucleotides KW - catalytic DNA KW - epitranscriptomics KW - in vitro selection KW - RNA cleavage Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-279208 SN - 978-1-0716-2501-9 PB - Humana Press ER - TY - THES A1 - Ertl, Julia Andrea T1 - Bioorthogonale chemische Modifikation der Bm-Levansucrase zur rationalen Anpassung der Produktspezifität T1 - Bioorthogonal chemical modification of the Bm-Levansucrase for rational adaptation of the product specificity N2 - Enzym-Modifikationen finden in der Natur in Form von posttranslationalen Protein-Modifikationen statt und sind ein faszinierender Mechanismus, um die biologische Vielfalt und Funktion von Proteinen um ein Vielfaches zu erhöhen. Daher ist es für ein ganzheitliches Verständnis bestimmter biologischer Prozesse oder enzymatischer Struktur-Funktions-Beziehungen unerlässlich, chemische Methoden zu entwickeln, die in der Lage sind, diese natürliche Diversität nachzuahmen.[61] Die wohl größte Herausforderung der chemischen Protein-Konjugation ist die chemo- und regioselektive Modifikation einer gezielten Aminosäure bei gleichzeitig milden und physiologischen Reaktionsbedingungen. Trotz zahlreich beschriebener Ansätze zur selektiven Protein-Modifikation, bedarf es weiterhin neuer Methoden, da viele bestehende Herangehens¬weisen auf ein spezielles System zugeschnitten sind.[9, 63] Aus diesem Grund sollte im Rahmen dieser Arbeit eine breit anwendbare Methode zur selektiven chemischen Tyrosin-Modifikation am Modell der Levansucrase aus Bacillus megaterium entwickelt werden. Durch eine zweistufige Protein-Modifikation, bestehend aus einer En-Reaktion im ersten Schritt und einer Click-Reaktion im zweiten Konjugationsschritt, gelang es die Produktspezifität der Bm Levansucrase rational zu beeinflussen. Zunächst wurde die Tyrosin-spezifische En-Reaktion mit der Luminol-Verbindung 1 an natürlich vorkommenden Tyrosin-Seitenketten der Levansucrase erprobt und analysiert. Hierbei zeigte sich durch massenspektrometrische Untersuchungen, dass hauptsächlich zwei der 25 vorhandenen Tyrosin-Reste mit dem Luminol-Tag 1 modifiziert wurden, zu denen die Seitenketten Y247 und Y196 gehörten. Um die Auswirkungen der Tyrosin-Modifikation leichter interpretieren zu können und eine gegenseitige Beeinflussung auszuschließen, wurde vorerst mit der Einzelmutante Y247F gearbeitet. Da nach der ersten Modifikation der Variante Y247F geringe Veränderungen im Produkt¬spektrum beobachtet wurden, insbesondere im hoch-molekularen Bereich, wurde die Click-Reaktion im zweiten Schritt mit der Intention durchgeführt, diesen Effekt zu verstärken. Schließlich bewirkte die Click-Reaktion mit Azidoglucose (AzGlc) bei Variante Y247F-1-AzGlc eine erhebliche Verschiebung der Produktverteilung von kleinen Fructooligosacchariden (ca. 1100 Da) hin zu hoch-molekularem Levan (ca. 2,1∙106 Da). Drei weitere Positionen, die in der dritten Zone des Enzyms liegen, wurden für die gentechnische Substitution gegen nicht-native Tyrosin-Reste ausgewählt. Dadurch wurden die Varianten E314Y, D248Y sowie F445Y erhalten und anschließend wie zuvor in zwei Schritten chemisch modifiziert. Die Modifikation dieser Varianten führte hinsichtlich der Veränderung des Produktprofils zu ähnlichen Ergebnissen, wie sie mit dem Enzym Y247F erhalten wurden (Übersicht 1, A). Um den Einfluss verschiedener Seitenketten zu analysieren, wurden neben der Azidoglucose vier weitere Azido-Verbindungen in der Click-Reaktion getestet. Die Resultate aus den genannten Untersuchungen und die Einbeziehung molekular¬-dynamischer Simulationen ließen erste Rückschlüsse auf die mechanistischen Prozesse der Bm Levansucrase und deren gezielte Manipulation zu: Die Größe der eingeführten Seitenkette sowie die Fähigkeit des Tags polare Wechselwirkungen auszubilden, spielen eine entscheidende Rolle zur rationalen Modulation der Produkt¬spezifität. Insbesondere die räumliche Orientierung und Bewegung der Seitenkette 1 AzGlc und die damit einhergehende sterische Hinderung trugen dazu bei, eine vorzeitige Dissoziation der wachsenden Fructane zu verhindern und ermöglichten dadurch die prozessive Polymersynthese. Weitere Erkenntnisse über den Levan-Elongationsmechanismus wurden durch die Modifikation der Varianten N126Y und S125Y erhalten. Diese lagen im Gegensatz zu den zuvor untersuchten Tyrosin-Resten nicht im Wachstumsverlauf des Substrats und besaßen zudem eine kürzere Distanz zum aktiven Zentrum. In beiden Fällen führte bereits die erste Modifikation mit Luminol-Derivat 1 zu völlig unter¬schiedlichen Produktprofilen im Vergleich zu den zuvor untersuchten Enzym-Varianten. Während mit der Variante N126Y-1 eine signifikante Akkumulation (bis zu 800 % Zunahme) verschiedener Oligosaccharide erzielt wurde, synthetisierte die Variante S125Y-1 schon nach dem ersten Modifikationsschritt Levan-Polymer (Übersicht 1, B/C). Die zugrunde-liegenden Interaktionen und Trajektorien der eingeführten Seitenkette wurden ebenfalls mit Hilfe von MD Simulationen analysiert und bestätigten die zuvor getroffenen Annahmen. Durch die räumliche Nähe zur Substrat-Bindungstasche reichte bei Variante S125Y 1 bereits die Luminol-Verbindung aus, um die Substrat-Dissoziation zu verhindern und damit die Polymer¬synthese zu induzieren. Hingegen dazu ergaben die Simulationen eine sehr dynamische und fluktuierende Seitenkette für N126Y-1, was vermutlich zur Destabilisierung initialer Wechselwirkungen zwischen Substrat und der Protein¬oberfläche führte und dadurch die Freisetzung und Akkumulation kurzer Oligo-saccharide begünstigte. Durch die bioorthogonale chemische Einführung einer artifiziellen Seitenkette war es schließlich möglich, das Produktspektrum der Bm Levansucrase sowohl in Richtung Polymersynthese als auch in Richtung kurzer Oligosaccharide zu lenken. Unter Verwendung der Tyrosin-spezifischen En-Reaktion wurden dafür gezielt native und nicht-native Tyrosin-Reste selektiv modifiziert und in einer Folge¬reaktion mittels Click-Chemie zusätzlich derivatisiert. Die Auswirkungen der Modifikations-Reaktionen auf den Elongationsmechanismus des Substrats konnten durch MD-Simulationen aufgeklärt werden. Das Ziel, die Produktspezifität der Levansucrase rational zu beeinflussen und in eine gezielte Richtung zu steuern, wurde damit erfolgreich umgesetzt. Ein weiterer Fokus dieser Arbeit lag darin, eine effiziente und einfache Methode zur Reinigung eines Fructan-Gemisches zu entwickeln, um damit den Zugang zu Oligo-sacchariden definierter Größen zu vereinfachen. Die Verfügbarkeit bestimmter Oligosaccharide in ausreichender Menge und Reinheit würde die Untersuchung von Fructanen auf ihre präbiotischen Eigenschaften erleichtern und zum Verständnis der Korrelation zwischen dem Darmmikrobiom und verschiedenen Krankheits¬bildern beitragen.[125] Mit Hilfe der Levansucrase-Variante K373L wurde ein Fructan-Gemisch synthetisiert, das im Vergleich zum Produkt¬profil des Wildtyps einen höheren Anteil kurzkettiger Oligosaccharide aufwies. In einem dreistufigen Reinigungsprozess wurde das Produktgemisch im ersten Schritt von den Monosacchariden Glucose und Fructose sowohl fermentativ durch den Hefe¬stamm H. polymorpha als auch chromatographisch per Silicagel separiert. Anschließend erfolgte eine grobe Trennung der Oligosaccharide nach dem Größen¬ausschlussprinzip mit einer Bio-Gel®P2-Säule. Im letzten Schritt wurde die Oligosaccharidfraktion, die hauptsächlich Tri- und Tetrasaccharide enthielt, schließlich mittels Umkehrphasen-Säulenchromatographie (RP18-HPLC) in die gewünschten Produkte aufgetrennt. Auf diese Weise gelang es, die Oligosaccharide 1 Kestose (28 %), 6 Kestose (56 %) und 6 Nystose (20 %) in hoher Reinheit (> 95 %) und moderaten Ausbeuten zu isolieren (Übersicht 2). Der letzte Teil dieser Arbeit sollte die verschiedenen Disziplinen der Biokatalyse, chemischen Protein-Modifikation und Click-Reaktion mit einer neuen Kompontente, der Photokatalyse, verbinden und in einem innovativen Konzept die Grundlage für die Kombination dieser Forschungsbereiche schaffen. In diesem Kontext wurde einerseits eine lineare photo-biokatalysierte Kaskaden-Reaktion entworfen und vorbereitet, während andererseits die Synthese eines clickbaren Photokatalysators durchgeführt wurde (Übersicht 3). Für den enzymatischen Teil der Kaskaden-Reaktion wurden die Halogenasen RebH und RadH mit den zugehörigen Regenerationssystemen Fre und GDH erfolgreich in E. coli exprimiert, gereinigt und deren Aktivität nachgewiesen. Darüber hinaus wurde ein aktiver Alkin-funktionalisierter Photokatalysator synthetisiert, dessen Aktivität auch nach der Click-Reaktion mit einer Aminosäure und einem Peptid erhalten blieb. Damit wurden die Grundlagen geschaffen, um z. B. photoaktive Bausteine in ein Enzym einzubringen und somit neue lichtabhängige Reaktionszentren oder sogenannte Designer-Enzyme zu erzeugen. N2 - Enzyme modifications occur in nature in the course of post-translational protein modifications and are fascinating mechanisms to increase the biological variety and function of proteins many times over. For a deep understanding of certain biological processes or enzymatic structure-function relationships, it is therefore essential to develop chemical methods that are able to mimic this natural diversity.[61] Probably the greatest challenge of chemical protein conjugation is the chemo- and regioselective modification of a particular amino acid while using mild and physiological reaction conditions. Despite numerous approaches to selective protein modification, new methods are still needed, as many existing strategies are customized for a specific system.[9, 63] Therefore, the aim of this work was to develop a widely applicable method for selective chemical tyrosine modification using the levansucrase from Bacillus megaterium as a model system. By a two-step protein modification consisting of an ene-reaction in the first step and a click-reaction in the second conjugation step, the product specificity of the Bm-levansucrase could be rationally controlled. In the early stages, the tyrosine-specific ene-reaction with luminol compound 1 was tested and analyzed on naturally occurring tyrosine residues. Mass spectroscopic investigations showed that mainly 2 of the 25 existing tyrosine residues were modified with luminol tag 1, including the tyrosines Y247 and Y196. In order to be able to interpret the effects of the tyrosine modification more easily and to exclude a mutual influence of the introduced side chains, the single mutant Y247F was used for further investigations. Since small changes in the product spectrum were observed after the first modification of the levansucrase variant Y247F, especially in the high molecular weight range, the second modification was carried out with the intention of intensifying this effect even further. Finally, the click reaction with azido¬glucose (AzGlc) in variant Y247F-1-AzGlc caused a significant shift in the product distribution from small fructooligosaccharides (approx. 1100 Da) to high molecular weight levan (approx. 2,1∙106 Da). Three further positions, located in the third zone of the enzyme, were selected for genetic substitution against non-native tyrosine residues. Thus, the variants E314Y, D248Y and F445Y were obtained and then chemically modified in two steps as described before. In terms of product distribution and polymer synthesis, the modification of these variants led to comparable results to those obtained with the enzyme Y247F (overview 1, A). To analyze the influence of different side chains regarding size and polarity, four additional azido compounds were tested in the click reaction in comparison to the azidoglucose. The results of the above-mentioned investigations and the consideration of molecular dynamic simulations allowed first conclusions about the mechanistic processes of the Bm levansucrase and its specific manipulation. The size of the introduced side chain as well as the ability of the tag to form polar interactions play an important role in the rational modulation of the product specificity. In particular, the spatial orientation and movement of the tag and the resulting steric hindrance helped to prevent premature dissociation of the growing fructans and thus enabled the processive polymer synthesis. Further insights into the levan elongation mechanism were obtained by modifying the variants N126Y and S125Y. In contrast to previously investigated tyrosine residues, these positions were not located in the oligosaccharide elongation pathway and further they had a shorter distance to the active centre. In both cases, already the first modification with luminol derivative 1 led to completely different product profiles. While the variant N126Y-1 showed a distinct accumulation (up to 800 % increase) of different oligo¬saccharides, the variant S125Y-1 synthesized levan polymer already after the first modification step (overview 1, B/C). The interactions and trajectories of the introduced side chain were again analyzed with the aid of MD simulations and confirmed the previous assumptions. Due to the proximity to the substrate binding pocket, the luminol tag of variant S125Y-1 was already sufficient to prevent substrate dissociation and to induce polymer synthesis. In contrast, the simulations revealed a very dynamic and fluctuating side chain for N126Y-1, which presumably led to the destabilization of initial interactions between the substrate and the protein surface and thus triggered the release and accumulation of short oligosaccharides. Finally, the bioorthogonal chemical introduction of an artificial side chain made it possible to steer the product spectrum of the Bm-levansucrase towards both polymer synthesis and short oligosaccharides. Using the tyrosine specific ene-reaction, native and non-native tyrosine residues were selectively modified and additionally derivatized in a subsequent reaction by click-chemistry. The effects of the modification reactions on the elongation mechanism of the substrate were elucidated by MD simulations. The goal of rationally influencing the product specificity of the levansucrase and controlling the product synthesis in a specific direction was thereby successfully achieved. Another focus of this work was to develop an efficient and simple method for the purification of a fructan mixture in order to facilitate the access to oligosaccharides of defined sizes. The availability of certain oligosaccharide lengths in sufficient quantity and purity would improve the investigation of fructans for their prebiotic properties and contribute to the understanding of the correlation between the intestinal microbiome and various diseases.[125] By using the levansucrase variant K373L, a fructan mixture with a higher content of certain oligosaccharides compared to the product profile of the wild type enzyme, was synthesized. In a three-step purification process, the first step was to separate the product mixture from the monosaccharides glucose and fructose both by fermentation using the yeast strain H. polymorpha and chromatographically by silica gel. Subsequently, the oligosaccharides were separated by size exclusion chromatography using a Bio-Gel®P2 column. In the last step, the oligosaccharide fraction, which mainly contained tri- and tetrasaccharides, was finally separated into the desired products by reversed phase column chromatography (RP18-HPLC). In this way it was successfully achieved to isolate the oligosaccharides 1 kestose (28 %), 6 kestose (56 %) and 6 nystose (20 %) in high purity (> 95 %) and moderate yields (overview 2). The last part of this work was intended to combine the different disciplines of biocatalysis, chemical protein modification and click reaction with the new component photocatalysis, and to create the basis for combining these research areas in an innovative concept. In this context a linear photo-biocatalysed cascade reaction was developed and prepared on the one side, while on the other side the synthesis of a clickable photocatalyst was performed (overview 3). For the enzymatic part of the cascade reaction the halogenases RebH and RadH with the corresponding regeneration systems Fre and GDH were successfully expressed, purified and their activity with the natural substrates was verified. In addition, an active alkyne-functionalized photocatalyst was synthesized, whose activity was retained even after the click reaction with an amino acid or peptide. This created the basis for introducing photoactive building blocks into larger structures or an enzyme and thereby generating new light-dependent reaction centres or so-called designer enzymes. KW - Levansucrase KW - Fotochemische Reaktion KW - Proteinmodifikation KW - Photo-Biokatalyse KW - Proteinmodifizierung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-207319 ER - TY - JOUR A1 - Quast, Helmut A1 - Gescheidt, Georg A1 - Spichty, Martin T1 - Topological dynamics of a radical ion pair: Experimental and computational assessment at the relevant nanosecond timescale JF - Chemistry N2 - Chemical processes mostly happen in fluid environments where reaction partners encounter via diffusion. The bimolecular encounters take place at a nanosecond time scale. The chemical environment (e.g., solvent molecules, (counter)ions) has a decisive influence on the reactivity as it determines the contact time between two molecules and affects the energetics. For understanding reactivity at an atomic level and at the appropriate dynamic time scale, it is crucial to combine matching experimental and theoretical data. Here, we have utilized all-atom molecular-dynamics simulations for accessing the key time scale (nanoseconds) using a QM/MM-Hamiltonian. Ion pairs consisting of a radical ion and its counterion are ideal systems to assess the theoretical predictions because they reflect dynamics at an appropriate time scale when studied by temperature-dependent EPR spectroscopy. We have investigated a diketone radical anion with its tetra-ethylammonium counterion. We have established a funnel-like transition path connecting two (equivalent) complexation sites. The agreement between the molecular-dynamics simulation and the experimental data presents a new paradigm for ion–ion interactions. This study exemplarily demonstrates the impact of the molecular environment on the topological states of reaction intermediates and how these states can be consistently elucidated through the combination of theory and experiment. We anticipate that our findings will contribute to the prediction of bimolecular transformations in the condensed phase with relevance to chemical synthesis, polymers, and biological activity. KW - ion pairing KW - radical anion KW - kinetics KW - thermodynamics KW - molecular dynamics KW - QM/MM KW - EPR Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-285195 SN - 2624-8549 VL - 2 IS - 2 SP - 219 EP - 230 ER - TY - THES A1 - Siewert, Aaron T1 - Nucleotide analogs as rigid spin labels for DNA and RNA T1 - Nukleotidanaloga als starre Spinmarker für DNA und RNA N2 - Nucleic acids are one of the important classes of biomolecules together with carbohydrates, proteins and lipids. Both deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) are most well known for their respective roles in the storage and expression of genetic information. Over the course of the last decades, nucleic acids with a variety of other functions have been discovered in biological organisms or created artificially. Examples of these functional nucleic acids are riboswitches, aptamers and ribozymes. In order to gain information regarding their function, several analytical methods can be used. Electron paramagnetic resonance (EPR) spectroscopy is one of several techniques which can be used to study nucleic acid structure and dynamics. However, EPR spectroscopy requires unpaired electrons and because nucleic acids themselves are not paramagnetic, the incorporation of spin labels which carry a radical is necessary. Here, three new spin labels for the analysis of nucleic acids by EPR spectroscopy are presented. All of them share two important design features. First, the paramagnetic center is located at a nitroxide, flanked by ethyl groups to prevent nitroxide degradation, for example during solid phase synthesis. Furthermore, they were designed with rigidity as an important quality, in order to be useful for applications like pulsed electron double resonance (PELDOR) spectroscopy, where independent motion of the spin labels relative to the macromolecule has a noticeable negative effect on the precision of the measurements. Benzi-spin is a spin label which differs from most previous examples of rigid spin labels in that rather than being based on a canonical nucleoside, with a specific base pairing partner, it is supposed to be a universal nucleoside which is sufficiently rigid for EPR measurements when placed opposite to a number of different nucleosides. Benzi-spin was successfully incorporated into a 20 nt oligonucleotide and its base pairing behavior with seven different nucleosides was examined by UV/VIS thermal denaturation and continuous wave (CW) EPR experiments. The results show only minor differences between the different nucleosides, thus confirming the ability of benzi-spin to act as a universally applicable spin label. Lumi-spin is derived from lumichrome. It features a rigid scaffold, as well as a free 2'-hydroxy group, which should make it well suited for PELDOR experiments once it is incorporated into RNA oligonucleotides. EÇr is based on the Ç family of spin labels, which contains the most well known rigid spin labels for nucleic acids to this day. It is essentially a version of EÇm with a free 2'-hydroxy group. It was converted to triphosphate EÇrTP and used for primer extension experiments to test the viability of enzymatic incorporation of rigid spin labels into oligonucleotides as an alternative to solid-phase synthesis. Incorporation into DNA by Therminator III DNA polymerase in both single-nucleotide and full-length primer extensions was achieved. All three of these spin labels represent further additions to the expanding toolbox of EPR spectroscopy on nucleic acids and might prove valuable for future research. N2 - Nukleinsäuren sind neben den Kohlenhydraten, Proteinen und Lipiden eine der wichtigen Klassen von Biomolekülen. Sowohl Deoxyribonukleinsäure (DNA) und Ribonukleinsäure (RNA) sind am besten für ihre Funktionen bei der Speicherung und Expression der genetischen Informationen bekannt. Während der letzten Jahrzehnte wurden Nukleinsäuren mit einer Vielzahl von Funktionen in biologischen Organismen entdeckt oder künstlich hergestellt. Beispiele für diese funktionellen Nukleinsäuren sind Riboswitches, Aptamere und Ribozyme. Um Informationen über ihre Funktionsweisen zu erhalten, können verschiedene analytische Methoden verwendet werden. Elektronenspinresonanzspektroscopie (ESR) ist eine Analysetechnik, die Aufschluss über Struktur und Dynamik von Nukleinsäuren geben kann. Für ESR Messungen werden ungepaarte Elektronen benötigt, sodass nicht paramagnetische Verbindungen mit einem Spinmarker modifiziert werden müssen, der ein Radikal trägt. In dieser Arbeit werden drei neue Spinmarker für die ESR Analyse von Nukleinsäuren vorgestellt. Allen liegen zwei Designprinzipien zugrunde. Erstens wird als paramagnetische Verbindung ein Nitroxid verwendet, welches von Ethylgruppen flankiert wird um das Radikal zu stabilisieren, zum Beispiel gegen Reagenzien, die in der Festphasensynthese verwendet werden. Zweitens sind die Nitroxide Teil starrer Ringsysteme. Dies ist besonders wichtig für Anwendungen wie Abstandsmessungen mittels Pulselektronendoppelresonanzspektroskopie (PELDOR), wo die Genauigkeit der Messung von Bewegungen der Spinmarker relativ zum Makromolekül beeinträchtigt wird. Benzi-spin unterscheidet sich von vielen anderen starren Spinmarkern dadurch, dass es nicht auf einem kanonischen Nukleosid mit einem spezifischen Bindungspartner basiert. Stattdessen handelt es sich um ein universelles Nukleosid, das unabhängig vom gegenüberliegenden Nukleosid starr genug für ESR Messungen ist. Benzi-spin wurde erfolgreich in ein Oligonucleotid eingebaut und seine Basenpaarung mit sieben verschiedenen Nukleosiden mittels UV/VIS Schmelzkurven und Continuous Wave (CW) ESR Experimenten untersucht. Die Ergebnisse zeigen nur geringe Unterschiede zwischen den verschiedenen Nukleosiden, was die Einsetzbarkeit von Benzi-spin als universeller Spinmarker bestätigt. Lumi-spin ist vom Lumichrom abgeleitet. Es zeichnet sich durch ein starres Gerüst und eine freie 2'-Hydroxygruppe aus, wodurch es gut für PELDOR Messungen in RNA geeignet sein sollte. EÇr gehört zur Ç Familie, welche die am besten bekannten starren Spinmarker für Nukleinsäuren enthält. Es handelt sich um eine Version von EÇm mit einer freien 2'-Hydroxygruppe. EÇr wurde zum Triphosphat EÇrTP konvertiert und für Primer Extension Experimente verwendet um die Möglichkeit des enzymatischen Einbaus starrer Spinmarker in Oligonukleotide als Alternative zur Festphasensynthese zu prüfen. Der Einbau in DNA mit Therminator III DNA Polymerase in Primer Extensions war erfolgreich. Alle drei Spinmarker erweitern die Möglichkeiten der ESR-spektroskopischen Untersuchung von Nukleinsäuren und können sich für zukünftige Forschung als nützlich erweisen. KW - Nucleinsäuren KW - DNS KW - RNS KW - Elektronenspinresonanzspektroskopie KW - Spin-Sonde KW - Nucleic acids KW - DNA KW - RNA KW - EPR spectroscopy KW - Spin labels Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-247657 ER - TY - JOUR A1 - Peters, Simon A1 - Kaiser, Lena A1 - Fink, Julian A1 - Schumacher, Fabian A1 - Perschin, Veronika A1 - Schlegel, Jan A1 - Sauer, Markus A1 - Stigloher, Christian A1 - Kleuser, Burkhard A1 - Seibel, Juergen A1 - Schubert-Unkmeir, Alexandra T1 - Click-correlative light and electron microscopy (click-AT-CLEM) for imaging and tracking azido-functionalized sphingolipids in bacteria JF - Scientific Reports N2 - Sphingolipids, including ceramides, are a diverse group of structurally related lipids composed of a sphingoid base backbone coupled to a fatty acid side chain and modified terminal hydroxyl group. Recently, it has been shown that sphingolipids show antimicrobial activity against a broad range of pathogenic microorganisms. The antimicrobial mechanism, however, remains so far elusive. Here, we introduce 'click-AT-CLEM', a labeling technique for correlated light and electron microscopy (CLEM) based on the super-resolution array tomography (srAT) approach and bio-orthogonal click chemistry for imaging of azido-tagged sphingolipids to directly visualize their interaction with the model Gram-negative bacterium Neisseria meningitidis at subcellular level. We observed ultrastructural damage of bacteria and disruption of the bacterial outer membrane induced by two azido-modified sphingolipids by scanning electron microscopy and transmission electron microscopy. Click-AT-CLEM imaging and mass spectrometry clearly revealed efficient incorporation of azido-tagged sphingolipids into the outer membrane of Gram-negative bacteria as underlying cause of their antimicrobial activity. KW - antimicrobials KW - biological techniques KW - imaging KW - microbiology KW - microbiology techniques KW - microscopy Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-259147 VL - 11 IS - 1 ER - TY - JOUR A1 - Feng, Yi A1 - Zhou, Jiadong A1 - Qiu, Honglin A1 - Schnitzlein, Matthias A1 - Hu, Jingtao A1 - Liu, Linlin A1 - Würthner, Frank A1 - Xie, Zengqi T1 - Boron‐Locked Starazine – A Soluble and Fluorescent Analogue of Starphene JF - Chemistry – A European Journal N2 - A starlike heterocyclic molecule containing an electron‐deficient nonaaza‐core structure and three peripheral isoquinolines locked by three tetracoordinate borons, namely isoquinoline‐nona‐starazine (QNSA), is synthesized by using readily available reactants through a rather straightforward approach. This new heteroatom‐rich QNSA possesses a quasi‐planar π‐backbone structure, and bears phenyl substituents on borons which protrude on both sides of the π‐backbones endowing it with good solubility in common organic solvents. Contrasting to its starphene analogue, QNSA shows intense fluorescence with a quantum yield (PLQY) of up to 62 % in dilute solution. KW - conjugated molecule KW - electronic structure KW - luminescence KW - starazine KW - starphene analogue Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-276423 VL - 28 IS - 29 ER - TY - JOUR A1 - Full, Julian A1 - Panchal, Santosh P. A1 - Götz, Julian A1 - Krause, Ana‐Maria A1 - Nowak‐Król, Agnieszka T1 - Modulare Synthese helikal‐chiraler Organobor‐Verbindungen: Ausschnitte verlängerter Helices JF - Angewandte Chemie N2 - Zwei Arten helikal-chiraler Verbindungen mit einem oder zwei Boratomen wurden nach einem modularen Ansatz synthetisiert. Die Bildung der helikalen Strukturen erfolgte durch Einführung von Bor in flexible Biaryl- bzw. Triaryl-Vorstufen, hergestellt aus kleinen achiralen Bausteinen. Die durchgehend ortho-fusionierten Azabora[7]helicene zeichnen sich dabei durch außergewöhnliche Konfigurationsstabilität, blaue oder grüne Fluoreszenz in Lösung mit Quantenausbeuten (Φ\(_{fl}\)) von 18–24 %, grüne oder gelbe Emission im Festkörper (Φ\(_{fl}\) bis zu 23 %) und starke chiroptische Resonanz mit großen Anisotropiefaktoren von bis zu 1.12×10\(^{-2}\) aus. Azabora[9]helicene, aufgebaut aus winkelförmig sowie linear angeordneten Ringen, sind blaue Emitter mit Φ\(_{fl}\) von bis zu 47 % in CH\(_{2}\)Cl\(_{2}\) und 25 % im Festkörper. DFT-Rechnungen zeigen, dass ihre P-M-Interkonversion über einen komplexeren Weg verläuft als im Fall von H1. Röntgenstrukturanalyse von Einkristallen zeigt deutliche Unterschiede in der Packungsanordnung von Methyl- und Phenylderivaten auf. Die Moleküle werden als Primärstrukturen verlängerter Helices vorgeschlagen. KW - Chiralität KW - Fluoreszenz KW - Helicen KW - Organobor KW - Zirkulardichroismus Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-224385 VL - 133 IS - 8 SP - 4396 EP - 4403 ER -