TY - JOUR A1 - Lehmann, Matthias A1 - Baumann, Maximilian A1 - Lambov, Martin A1 - Eremin, Alexey T1 - Parallel polar dimers in the columnar self‐assembly of umbrella‐shaped subphthalocyanine mesogens JF - Advanced Functional Materials N2 - The self-assembly of umbrella-shaped mesogens is explored with subphthalocyanine cores and oligo(thienyl) arms with different lengths in the light of their application as light-harvesting and photoconducting materials. While the shortest arm derivatives self-assemble in a conventional columnar phase with a single mesogen as a repeating unit, the more extended derivatives generate dimers that pile up into liquid crystalline columns. In contrast to the antiparallel arrangement known from single crystals, the present mesogens align as parallel dimers in polar columnar phases as confirmed by X-ray scattering, experimental densities, dielectric spectroscopy, second harmonic generation, alignment, and conductivity studies. UV–vis and fluorescence spectroscopies reveal a broad absorption in the visible range and only weak emission of the Q-band. Thus, these light-collecting molecules forming strongly polar columnar mesophases are attractive for application in the area of photoconductive materials. KW - umbrella-shaped mesogens KW - parallel polar dimers KW - subphthalocyanine KW - columnar phases KW - ferroelectrics KW - liquid crystal alignment KW - organic semiconductors Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-256343 VL - 31 IS - 38 ER - TY - THES A1 - Sapotta, Meike T1 - Perylene Bisimide Cyclophanes: Recognition of Alkaloids, Aggregation Behavior in Aqueous Environment and Guest-Mediated Chirality Transfer T1 - Perylenbisimidcyclophane: Alkaloiderkennung, Aggregationsverhalten in wässriger Umgebung und gastvermittelter Chiralitätstransfer N2 - Inspired by the fact that sufficient solubility in aqueous media can be achieved by functional substitution of perylene bisimides (PBIs) with polar groups, one of the essential aims of this thesis was the design and successful synthesis of the new water-soluble PBI cyclophanes [2PBI]-1m and [2PBI]-1p, which are appended with branched, hydrophilic oligoethylene glycol (OEG) chains. Subsequently, the focus was set on the elucidation of properties of PBI cyclophane hosts which are also of relevance for recognition processes in biological systems. The performance of the new amphiphilic PBI cyclophane [2PBI]-1p as synthetic receptors for various natural aromatic alkaloids in aqueous media was thoroughly investigated. Alkaloids represent a prominent class of ubiquitous nitrogen containing natural compounds with a great structural variety and diverse biological activity. As of yet, no chromophore host acting as a molecular probe for a range of alkaloids such as harmine or harmaline is known. In addition, the self-association behavior of cyclophane host [2PBI]-1m and its reference monomer in water was studied in order to gain insights into the thermodynamic driving forces affecting the self-assembly process of these two PBI systems in aqueous environment. Moreover, the chirality transfer upon guest binding previously observed for a PBI cyclophane was investigated further. The assignment of the underlying mechanism of guest recognition to either the induced fit or conformational selection model was of particular interest. N2 - Diese Arbeit befasste sich mit der Erforschung neuer Eigenschaften von Perylenbisimid-cyclophanwirten, zum Beispiel der Gast-Komplexierung in wässriger Umgebung (Kapitel 3.2) oder dem Einfluss von Wasser beim Selbstassemblierungsprozess einer dieser Wirte in Wasser (Kapitel 3.3). Weiterhin wurden der Chiralitätstransfer durch Gasterkennung und das der Wirt-Gast-Komplexbildung zugrunde liegende mechanistische Modell untersucht (Kapitel 3.4). ... KW - Supramolekulare Chemie KW - Perylenderivate KW - Wirt-Gast-Beziehung KW - Host-Guest-Chemistry KW - Self-Assembly in Water KW - Chirality Transfer KW - Chiralität KW - Selbstorganisation KW - Organische Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200028 ER - TY - THES A1 - Michail, Evripidis T1 - Design and Development of a Two-Photon Absorption Induced Fluorescence Spectrometer and the Investigation of Nonlinear Optical Properties of Organic Chromophores T1 - Aufbau und Entwicklung eines Zwei-Photonen-Absorptions-induzierten Fluoreszenzspektrometers und Untersuchung der nichtlinearen optischen Eigenschaften organischer Chromophore N2 - Main objectives of the present dissertation can be divided in two parts. The first part deals with setting up a spectroscopic technique for reliable and accurate measurements of the two-photon absorption (2PA) cross section spectra. In the second part, this firmly established experimental technique together with conventional spectroscopic characterization, quantum-chemical computations and theoretical modelling calculations was combined and therefore used as a tool to gain information for the so-called structure-property relationship through several molecular compounds. N2 - Die Hauptziele der vorliegenden Dissertation lassen sich in zwei Teile gliedern. Der erste Teil befasst sich mit dem Aufbau einer spektroskopischen Technik zur zuverlässigen und genauen Messung der Zwei-Photonen-Absorptionsquerschnittsspektren (2PA). Im zweiten Teil wurde diese fest etablierte experimentelle Technik zusammen mit konventioneller spektroskopischer Charakterisierung, quantenchemischen Berechnungen und theoretischen Modellrechnungen kombiniert und damit als Werkzeug genutzt, um über mehrere molekulare Verbindungen Informationen für die sogenannte Struktur-Eigenschafts-Beziehung zu gewinnen. KW - Nonlinear Optical Properties of Organic Materials KW - Two-photon absorption KW - Spectroscopy KW - Non-linear optics KW - Fluoreszenzspektrometer KW - Zweiphotonenabsorption Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-242185 ER - TY - CHAP A1 - Liaqat, Anam A1 - Sednev, Maksim V. A1 - Höbartner, Claudia T1 - In Vitro Selection of Deoxyribozymes for the Detection of RNA Modifications T2 - Ribosome Biogenesis: Methods and Protocols N2 - Deoxyribozymes are artificially evolved DNA molecules with catalytic abilities. RNA-cleaving deoxyribozymes have been recognized as an efficient tool for detection of modifications in target RNAs and provide an alternative to traditional and modern methods for detection of ribose or nucleobase methylation. However, there are only few examples of DNA enzymes that specifically reveal the presence of a certain type of modification, including N6-methyladenosine, and the knowledge about how DNA enzymes recognize modified RNAs is still extremely limited. Therefore, DNA enzymes cannot be easily engineered for the analysis of desired RNA modifications, but are instead identified by in vitro selection from random DNA libraries using synthetic modified RNA substrates. This protocol describes a general in vitro selection stagtegy to evolve new RNA-cleaving DNA enzymes that can efficiently differentiate modified RNA substrates from their unmodified counterpart. KW - RNA KW - deoxyribozymes KW - modified RNA nucleotides KW - catalytic DNA KW - epitranscriptomics KW - in vitro selection KW - RNA cleavage Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-279208 SN - 978-1-0716-2501-9 PB - Humana Press ER - TY - THES A1 - Ertl, Julia Andrea T1 - Bioorthogonale chemische Modifikation der Bm-Levansucrase zur rationalen Anpassung der Produktspezifität T1 - Bioorthogonal chemical modification of the Bm-Levansucrase for rational adaptation of the product specificity N2 - Enzym-Modifikationen finden in der Natur in Form von posttranslationalen Protein-Modifikationen statt und sind ein faszinierender Mechanismus, um die biologische Vielfalt und Funktion von Proteinen um ein Vielfaches zu erhöhen. Daher ist es für ein ganzheitliches Verständnis bestimmter biologischer Prozesse oder enzymatischer Struktur-Funktions-Beziehungen unerlässlich, chemische Methoden zu entwickeln, die in der Lage sind, diese natürliche Diversität nachzuahmen.[61] Die wohl größte Herausforderung der chemischen Protein-Konjugation ist die chemo- und regioselektive Modifikation einer gezielten Aminosäure bei gleichzeitig milden und physiologischen Reaktionsbedingungen. Trotz zahlreich beschriebener Ansätze zur selektiven Protein-Modifikation, bedarf es weiterhin neuer Methoden, da viele bestehende Herangehens¬weisen auf ein spezielles System zugeschnitten sind.[9, 63] Aus diesem Grund sollte im Rahmen dieser Arbeit eine breit anwendbare Methode zur selektiven chemischen Tyrosin-Modifikation am Modell der Levansucrase aus Bacillus megaterium entwickelt werden. Durch eine zweistufige Protein-Modifikation, bestehend aus einer En-Reaktion im ersten Schritt und einer Click-Reaktion im zweiten Konjugationsschritt, gelang es die Produktspezifität der Bm Levansucrase rational zu beeinflussen. Zunächst wurde die Tyrosin-spezifische En-Reaktion mit der Luminol-Verbindung 1 an natürlich vorkommenden Tyrosin-Seitenketten der Levansucrase erprobt und analysiert. Hierbei zeigte sich durch massenspektrometrische Untersuchungen, dass hauptsächlich zwei der 25 vorhandenen Tyrosin-Reste mit dem Luminol-Tag 1 modifiziert wurden, zu denen die Seitenketten Y247 und Y196 gehörten. Um die Auswirkungen der Tyrosin-Modifikation leichter interpretieren zu können und eine gegenseitige Beeinflussung auszuschließen, wurde vorerst mit der Einzelmutante Y247F gearbeitet. Da nach der ersten Modifikation der Variante Y247F geringe Veränderungen im Produkt¬spektrum beobachtet wurden, insbesondere im hoch-molekularen Bereich, wurde die Click-Reaktion im zweiten Schritt mit der Intention durchgeführt, diesen Effekt zu verstärken. Schließlich bewirkte die Click-Reaktion mit Azidoglucose (AzGlc) bei Variante Y247F-1-AzGlc eine erhebliche Verschiebung der Produktverteilung von kleinen Fructooligosacchariden (ca. 1100 Da) hin zu hoch-molekularem Levan (ca. 2,1∙106 Da). Drei weitere Positionen, die in der dritten Zone des Enzyms liegen, wurden für die gentechnische Substitution gegen nicht-native Tyrosin-Reste ausgewählt. Dadurch wurden die Varianten E314Y, D248Y sowie F445Y erhalten und anschließend wie zuvor in zwei Schritten chemisch modifiziert. Die Modifikation dieser Varianten führte hinsichtlich der Veränderung des Produktprofils zu ähnlichen Ergebnissen, wie sie mit dem Enzym Y247F erhalten wurden (Übersicht 1, A). Um den Einfluss verschiedener Seitenketten zu analysieren, wurden neben der Azidoglucose vier weitere Azido-Verbindungen in der Click-Reaktion getestet. Die Resultate aus den genannten Untersuchungen und die Einbeziehung molekular¬-dynamischer Simulationen ließen erste Rückschlüsse auf die mechanistischen Prozesse der Bm Levansucrase und deren gezielte Manipulation zu: Die Größe der eingeführten Seitenkette sowie die Fähigkeit des Tags polare Wechselwirkungen auszubilden, spielen eine entscheidende Rolle zur rationalen Modulation der Produkt¬spezifität. Insbesondere die räumliche Orientierung und Bewegung der Seitenkette 1 AzGlc und die damit einhergehende sterische Hinderung trugen dazu bei, eine vorzeitige Dissoziation der wachsenden Fructane zu verhindern und ermöglichten dadurch die prozessive Polymersynthese. Weitere Erkenntnisse über den Levan-Elongationsmechanismus wurden durch die Modifikation der Varianten N126Y und S125Y erhalten. Diese lagen im Gegensatz zu den zuvor untersuchten Tyrosin-Resten nicht im Wachstumsverlauf des Substrats und besaßen zudem eine kürzere Distanz zum aktiven Zentrum. In beiden Fällen führte bereits die erste Modifikation mit Luminol-Derivat 1 zu völlig unter¬schiedlichen Produktprofilen im Vergleich zu den zuvor untersuchten Enzym-Varianten. Während mit der Variante N126Y-1 eine signifikante Akkumulation (bis zu 800 % Zunahme) verschiedener Oligosaccharide erzielt wurde, synthetisierte die Variante S125Y-1 schon nach dem ersten Modifikationsschritt Levan-Polymer (Übersicht 1, B/C). Die zugrunde-liegenden Interaktionen und Trajektorien der eingeführten Seitenkette wurden ebenfalls mit Hilfe von MD Simulationen analysiert und bestätigten die zuvor getroffenen Annahmen. Durch die räumliche Nähe zur Substrat-Bindungstasche reichte bei Variante S125Y 1 bereits die Luminol-Verbindung aus, um die Substrat-Dissoziation zu verhindern und damit die Polymer¬synthese zu induzieren. Hingegen dazu ergaben die Simulationen eine sehr dynamische und fluktuierende Seitenkette für N126Y-1, was vermutlich zur Destabilisierung initialer Wechselwirkungen zwischen Substrat und der Protein¬oberfläche führte und dadurch die Freisetzung und Akkumulation kurzer Oligo-saccharide begünstigte. Durch die bioorthogonale chemische Einführung einer artifiziellen Seitenkette war es schließlich möglich, das Produktspektrum der Bm Levansucrase sowohl in Richtung Polymersynthese als auch in Richtung kurzer Oligosaccharide zu lenken. Unter Verwendung der Tyrosin-spezifischen En-Reaktion wurden dafür gezielt native und nicht-native Tyrosin-Reste selektiv modifiziert und in einer Folge¬reaktion mittels Click-Chemie zusätzlich derivatisiert. Die Auswirkungen der Modifikations-Reaktionen auf den Elongationsmechanismus des Substrats konnten durch MD-Simulationen aufgeklärt werden. Das Ziel, die Produktspezifität der Levansucrase rational zu beeinflussen und in eine gezielte Richtung zu steuern, wurde damit erfolgreich umgesetzt. Ein weiterer Fokus dieser Arbeit lag darin, eine effiziente und einfache Methode zur Reinigung eines Fructan-Gemisches zu entwickeln, um damit den Zugang zu Oligo-sacchariden definierter Größen zu vereinfachen. Die Verfügbarkeit bestimmter Oligosaccharide in ausreichender Menge und Reinheit würde die Untersuchung von Fructanen auf ihre präbiotischen Eigenschaften erleichtern und zum Verständnis der Korrelation zwischen dem Darmmikrobiom und verschiedenen Krankheits¬bildern beitragen.[125] Mit Hilfe der Levansucrase-Variante K373L wurde ein Fructan-Gemisch synthetisiert, das im Vergleich zum Produkt¬profil des Wildtyps einen höheren Anteil kurzkettiger Oligosaccharide aufwies. In einem dreistufigen Reinigungsprozess wurde das Produktgemisch im ersten Schritt von den Monosacchariden Glucose und Fructose sowohl fermentativ durch den Hefe¬stamm H. polymorpha als auch chromatographisch per Silicagel separiert. Anschließend erfolgte eine grobe Trennung der Oligosaccharide nach dem Größen¬ausschlussprinzip mit einer Bio-Gel®P2-Säule. Im letzten Schritt wurde die Oligosaccharidfraktion, die hauptsächlich Tri- und Tetrasaccharide enthielt, schließlich mittels Umkehrphasen-Säulenchromatographie (RP18-HPLC) in die gewünschten Produkte aufgetrennt. Auf diese Weise gelang es, die Oligosaccharide 1 Kestose (28 %), 6 Kestose (56 %) und 6 Nystose (20 %) in hoher Reinheit (> 95 %) und moderaten Ausbeuten zu isolieren (Übersicht 2). Der letzte Teil dieser Arbeit sollte die verschiedenen Disziplinen der Biokatalyse, chemischen Protein-Modifikation und Click-Reaktion mit einer neuen Kompontente, der Photokatalyse, verbinden und in einem innovativen Konzept die Grundlage für die Kombination dieser Forschungsbereiche schaffen. In diesem Kontext wurde einerseits eine lineare photo-biokatalysierte Kaskaden-Reaktion entworfen und vorbereitet, während andererseits die Synthese eines clickbaren Photokatalysators durchgeführt wurde (Übersicht 3). Für den enzymatischen Teil der Kaskaden-Reaktion wurden die Halogenasen RebH und RadH mit den zugehörigen Regenerationssystemen Fre und GDH erfolgreich in E. coli exprimiert, gereinigt und deren Aktivität nachgewiesen. Darüber hinaus wurde ein aktiver Alkin-funktionalisierter Photokatalysator synthetisiert, dessen Aktivität auch nach der Click-Reaktion mit einer Aminosäure und einem Peptid erhalten blieb. Damit wurden die Grundlagen geschaffen, um z. B. photoaktive Bausteine in ein Enzym einzubringen und somit neue lichtabhängige Reaktionszentren oder sogenannte Designer-Enzyme zu erzeugen. N2 - Enzyme modifications occur in nature in the course of post-translational protein modifications and are fascinating mechanisms to increase the biological variety and function of proteins many times over. For a deep understanding of certain biological processes or enzymatic structure-function relationships, it is therefore essential to develop chemical methods that are able to mimic this natural diversity.[61] Probably the greatest challenge of chemical protein conjugation is the chemo- and regioselective modification of a particular amino acid while using mild and physiological reaction conditions. Despite numerous approaches to selective protein modification, new methods are still needed, as many existing strategies are customized for a specific system.[9, 63] Therefore, the aim of this work was to develop a widely applicable method for selective chemical tyrosine modification using the levansucrase from Bacillus megaterium as a model system. By a two-step protein modification consisting of an ene-reaction in the first step and a click-reaction in the second conjugation step, the product specificity of the Bm-levansucrase could be rationally controlled. In the early stages, the tyrosine-specific ene-reaction with luminol compound 1 was tested and analyzed on naturally occurring tyrosine residues. Mass spectroscopic investigations showed that mainly 2 of the 25 existing tyrosine residues were modified with luminol tag 1, including the tyrosines Y247 and Y196. In order to be able to interpret the effects of the tyrosine modification more easily and to exclude a mutual influence of the introduced side chains, the single mutant Y247F was used for further investigations. Since small changes in the product spectrum were observed after the first modification of the levansucrase variant Y247F, especially in the high molecular weight range, the second modification was carried out with the intention of intensifying this effect even further. Finally, the click reaction with azido¬glucose (AzGlc) in variant Y247F-1-AzGlc caused a significant shift in the product distribution from small fructooligosaccharides (approx. 1100 Da) to high molecular weight levan (approx. 2,1∙106 Da). Three further positions, located in the third zone of the enzyme, were selected for genetic substitution against non-native tyrosine residues. Thus, the variants E314Y, D248Y and F445Y were obtained and then chemically modified in two steps as described before. In terms of product distribution and polymer synthesis, the modification of these variants led to comparable results to those obtained with the enzyme Y247F (overview 1, A). To analyze the influence of different side chains regarding size and polarity, four additional azido compounds were tested in the click reaction in comparison to the azidoglucose. The results of the above-mentioned investigations and the consideration of molecular dynamic simulations allowed first conclusions about the mechanistic processes of the Bm levansucrase and its specific manipulation. The size of the introduced side chain as well as the ability of the tag to form polar interactions play an important role in the rational modulation of the product specificity. In particular, the spatial orientation and movement of the tag and the resulting steric hindrance helped to prevent premature dissociation of the growing fructans and thus enabled the processive polymer synthesis. Further insights into the levan elongation mechanism were obtained by modifying the variants N126Y and S125Y. In contrast to previously investigated tyrosine residues, these positions were not located in the oligosaccharide elongation pathway and further they had a shorter distance to the active centre. In both cases, already the first modification with luminol derivative 1 led to completely different product profiles. While the variant N126Y-1 showed a distinct accumulation (up to 800 % increase) of different oligo¬saccharides, the variant S125Y-1 synthesized levan polymer already after the first modification step (overview 1, B/C). The interactions and trajectories of the introduced side chain were again analyzed with the aid of MD simulations and confirmed the previous assumptions. Due to the proximity to the substrate binding pocket, the luminol tag of variant S125Y-1 was already sufficient to prevent substrate dissociation and to induce polymer synthesis. In contrast, the simulations revealed a very dynamic and fluctuating side chain for N126Y-1, which presumably led to the destabilization of initial interactions between the substrate and the protein surface and thus triggered the release and accumulation of short oligosaccharides. Finally, the bioorthogonal chemical introduction of an artificial side chain made it possible to steer the product spectrum of the Bm-levansucrase towards both polymer synthesis and short oligosaccharides. Using the tyrosine specific ene-reaction, native and non-native tyrosine residues were selectively modified and additionally derivatized in a subsequent reaction by click-chemistry. The effects of the modification reactions on the elongation mechanism of the substrate were elucidated by MD simulations. The goal of rationally influencing the product specificity of the levansucrase and controlling the product synthesis in a specific direction was thereby successfully achieved. Another focus of this work was to develop an efficient and simple method for the purification of a fructan mixture in order to facilitate the access to oligosaccharides of defined sizes. The availability of certain oligosaccharide lengths in sufficient quantity and purity would improve the investigation of fructans for their prebiotic properties and contribute to the understanding of the correlation between the intestinal microbiome and various diseases.[125] By using the levansucrase variant K373L, a fructan mixture with a higher content of certain oligosaccharides compared to the product profile of the wild type enzyme, was synthesized. In a three-step purification process, the first step was to separate the product mixture from the monosaccharides glucose and fructose both by fermentation using the yeast strain H. polymorpha and chromatographically by silica gel. Subsequently, the oligosaccharides were separated by size exclusion chromatography using a Bio-Gel®P2 column. In the last step, the oligosaccharide fraction, which mainly contained tri- and tetrasaccharides, was finally separated into the desired products by reversed phase column chromatography (RP18-HPLC). In this way it was successfully achieved to isolate the oligosaccharides 1 kestose (28 %), 6 kestose (56 %) and 6 nystose (20 %) in high purity (> 95 %) and moderate yields (overview 2). The last part of this work was intended to combine the different disciplines of biocatalysis, chemical protein modification and click reaction with the new component photocatalysis, and to create the basis for combining these research areas in an innovative concept. In this context a linear photo-biocatalysed cascade reaction was developed and prepared on the one side, while on the other side the synthesis of a clickable photocatalyst was performed (overview 3). For the enzymatic part of the cascade reaction the halogenases RebH and RadH with the corresponding regeneration systems Fre and GDH were successfully expressed, purified and their activity with the natural substrates was verified. In addition, an active alkyne-functionalized photocatalyst was synthesized, whose activity was retained even after the click reaction with an amino acid or peptide. This created the basis for introducing photoactive building blocks into larger structures or an enzyme and thereby generating new light-dependent reaction centres or so-called designer enzymes. KW - Levansucrase KW - Fotochemische Reaktion KW - Proteinmodifikation KW - Photo-Biokatalyse KW - Proteinmodifizierung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-207319 ER - TY - JOUR A1 - Quast, Helmut A1 - Gescheidt, Georg A1 - Spichty, Martin T1 - Topological dynamics of a radical ion pair: Experimental and computational assessment at the relevant nanosecond timescale JF - Chemistry N2 - Chemical processes mostly happen in fluid environments where reaction partners encounter via diffusion. The bimolecular encounters take place at a nanosecond time scale. The chemical environment (e.g., solvent molecules, (counter)ions) has a decisive influence on the reactivity as it determines the contact time between two molecules and affects the energetics. For understanding reactivity at an atomic level and at the appropriate dynamic time scale, it is crucial to combine matching experimental and theoretical data. Here, we have utilized all-atom molecular-dynamics simulations for accessing the key time scale (nanoseconds) using a QM/MM-Hamiltonian. Ion pairs consisting of a radical ion and its counterion are ideal systems to assess the theoretical predictions because they reflect dynamics at an appropriate time scale when studied by temperature-dependent EPR spectroscopy. We have investigated a diketone radical anion with its tetra-ethylammonium counterion. We have established a funnel-like transition path connecting two (equivalent) complexation sites. The agreement between the molecular-dynamics simulation and the experimental data presents a new paradigm for ion–ion interactions. This study exemplarily demonstrates the impact of the molecular environment on the topological states of reaction intermediates and how these states can be consistently elucidated through the combination of theory and experiment. We anticipate that our findings will contribute to the prediction of bimolecular transformations in the condensed phase with relevance to chemical synthesis, polymers, and biological activity. KW - ion pairing KW - radical anion KW - kinetics KW - thermodynamics KW - molecular dynamics KW - QM/MM KW - EPR Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-285195 SN - 2624-8549 VL - 2 IS - 2 SP - 219 EP - 230 ER - TY - THES A1 - Siewert, Aaron T1 - Nucleotide analogs as rigid spin labels for DNA and RNA T1 - Nukleotidanaloga als starre Spinmarker für DNA und RNA N2 - Nucleic acids are one of the important classes of biomolecules together with carbohydrates, proteins and lipids. Both deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) are most well known for their respective roles in the storage and expression of genetic information. Over the course of the last decades, nucleic acids with a variety of other functions have been discovered in biological organisms or created artificially. Examples of these functional nucleic acids are riboswitches, aptamers and ribozymes. In order to gain information regarding their function, several analytical methods can be used. Electron paramagnetic resonance (EPR) spectroscopy is one of several techniques which can be used to study nucleic acid structure and dynamics. However, EPR spectroscopy requires unpaired electrons and because nucleic acids themselves are not paramagnetic, the incorporation of spin labels which carry a radical is necessary. Here, three new spin labels for the analysis of nucleic acids by EPR spectroscopy are presented. All of them share two important design features. First, the paramagnetic center is located at a nitroxide, flanked by ethyl groups to prevent nitroxide degradation, for example during solid phase synthesis. Furthermore, they were designed with rigidity as an important quality, in order to be useful for applications like pulsed electron double resonance (PELDOR) spectroscopy, where independent motion of the spin labels relative to the macromolecule has a noticeable negative effect on the precision of the measurements. Benzi-spin is a spin label which differs from most previous examples of rigid spin labels in that rather than being based on a canonical nucleoside, with a specific base pairing partner, it is supposed to be a universal nucleoside which is sufficiently rigid for EPR measurements when placed opposite to a number of different nucleosides. Benzi-spin was successfully incorporated into a 20 nt oligonucleotide and its base pairing behavior with seven different nucleosides was examined by UV/VIS thermal denaturation and continuous wave (CW) EPR experiments. The results show only minor differences between the different nucleosides, thus confirming the ability of benzi-spin to act as a universally applicable spin label. Lumi-spin is derived from lumichrome. It features a rigid scaffold, as well as a free 2'-hydroxy group, which should make it well suited for PELDOR experiments once it is incorporated into RNA oligonucleotides. EÇr is based on the Ç family of spin labels, which contains the most well known rigid spin labels for nucleic acids to this day. It is essentially a version of EÇm with a free 2'-hydroxy group. It was converted to triphosphate EÇrTP and used for primer extension experiments to test the viability of enzymatic incorporation of rigid spin labels into oligonucleotides as an alternative to solid-phase synthesis. Incorporation into DNA by Therminator III DNA polymerase in both single-nucleotide and full-length primer extensions was achieved. All three of these spin labels represent further additions to the expanding toolbox of EPR spectroscopy on nucleic acids and might prove valuable for future research. N2 - Nukleinsäuren sind neben den Kohlenhydraten, Proteinen und Lipiden eine der wichtigen Klassen von Biomolekülen. Sowohl Deoxyribonukleinsäure (DNA) und Ribonukleinsäure (RNA) sind am besten für ihre Funktionen bei der Speicherung und Expression der genetischen Informationen bekannt. Während der letzten Jahrzehnte wurden Nukleinsäuren mit einer Vielzahl von Funktionen in biologischen Organismen entdeckt oder künstlich hergestellt. Beispiele für diese funktionellen Nukleinsäuren sind Riboswitches, Aptamere und Ribozyme. Um Informationen über ihre Funktionsweisen zu erhalten, können verschiedene analytische Methoden verwendet werden. Elektronenspinresonanzspektroscopie (ESR) ist eine Analysetechnik, die Aufschluss über Struktur und Dynamik von Nukleinsäuren geben kann. Für ESR Messungen werden ungepaarte Elektronen benötigt, sodass nicht paramagnetische Verbindungen mit einem Spinmarker modifiziert werden müssen, der ein Radikal trägt. In dieser Arbeit werden drei neue Spinmarker für die ESR Analyse von Nukleinsäuren vorgestellt. Allen liegen zwei Designprinzipien zugrunde. Erstens wird als paramagnetische Verbindung ein Nitroxid verwendet, welches von Ethylgruppen flankiert wird um das Radikal zu stabilisieren, zum Beispiel gegen Reagenzien, die in der Festphasensynthese verwendet werden. Zweitens sind die Nitroxide Teil starrer Ringsysteme. Dies ist besonders wichtig für Anwendungen wie Abstandsmessungen mittels Pulselektronendoppelresonanzspektroskopie (PELDOR), wo die Genauigkeit der Messung von Bewegungen der Spinmarker relativ zum Makromolekül beeinträchtigt wird. Benzi-spin unterscheidet sich von vielen anderen starren Spinmarkern dadurch, dass es nicht auf einem kanonischen Nukleosid mit einem spezifischen Bindungspartner basiert. Stattdessen handelt es sich um ein universelles Nukleosid, das unabhängig vom gegenüberliegenden Nukleosid starr genug für ESR Messungen ist. Benzi-spin wurde erfolgreich in ein Oligonucleotid eingebaut und seine Basenpaarung mit sieben verschiedenen Nukleosiden mittels UV/VIS Schmelzkurven und Continuous Wave (CW) ESR Experimenten untersucht. Die Ergebnisse zeigen nur geringe Unterschiede zwischen den verschiedenen Nukleosiden, was die Einsetzbarkeit von Benzi-spin als universeller Spinmarker bestätigt. Lumi-spin ist vom Lumichrom abgeleitet. Es zeichnet sich durch ein starres Gerüst und eine freie 2'-Hydroxygruppe aus, wodurch es gut für PELDOR Messungen in RNA geeignet sein sollte. EÇr gehört zur Ç Familie, welche die am besten bekannten starren Spinmarker für Nukleinsäuren enthält. Es handelt sich um eine Version von EÇm mit einer freien 2'-Hydroxygruppe. EÇr wurde zum Triphosphat EÇrTP konvertiert und für Primer Extension Experimente verwendet um die Möglichkeit des enzymatischen Einbaus starrer Spinmarker in Oligonukleotide als Alternative zur Festphasensynthese zu prüfen. Der Einbau in DNA mit Therminator III DNA Polymerase in Primer Extensions war erfolgreich. Alle drei Spinmarker erweitern die Möglichkeiten der ESR-spektroskopischen Untersuchung von Nukleinsäuren und können sich für zukünftige Forschung als nützlich erweisen. KW - Nucleinsäuren KW - DNS KW - RNS KW - Elektronenspinresonanzspektroskopie KW - Spin-Sonde KW - Nucleic acids KW - DNA KW - RNA KW - EPR spectroscopy KW - Spin labels Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-247657 ER - TY - JOUR A1 - Peters, Simon A1 - Kaiser, Lena A1 - Fink, Julian A1 - Schumacher, Fabian A1 - Perschin, Veronika A1 - Schlegel, Jan A1 - Sauer, Markus A1 - Stigloher, Christian A1 - Kleuser, Burkhard A1 - Seibel, Juergen A1 - Schubert-Unkmeir, Alexandra T1 - Click-correlative light and electron microscopy (click-AT-CLEM) for imaging and tracking azido-functionalized sphingolipids in bacteria JF - Scientific Reports N2 - Sphingolipids, including ceramides, are a diverse group of structurally related lipids composed of a sphingoid base backbone coupled to a fatty acid side chain and modified terminal hydroxyl group. Recently, it has been shown that sphingolipids show antimicrobial activity against a broad range of pathogenic microorganisms. The antimicrobial mechanism, however, remains so far elusive. Here, we introduce 'click-AT-CLEM', a labeling technique for correlated light and electron microscopy (CLEM) based on the super-resolution array tomography (srAT) approach and bio-orthogonal click chemistry for imaging of azido-tagged sphingolipids to directly visualize their interaction with the model Gram-negative bacterium Neisseria meningitidis at subcellular level. We observed ultrastructural damage of bacteria and disruption of the bacterial outer membrane induced by two azido-modified sphingolipids by scanning electron microscopy and transmission electron microscopy. Click-AT-CLEM imaging and mass spectrometry clearly revealed efficient incorporation of azido-tagged sphingolipids into the outer membrane of Gram-negative bacteria as underlying cause of their antimicrobial activity. KW - antimicrobials KW - biological techniques KW - imaging KW - microbiology KW - microbiology techniques KW - microscopy Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-259147 VL - 11 IS - 1 ER - TY - JOUR A1 - Feng, Yi A1 - Zhou, Jiadong A1 - Qiu, Honglin A1 - Schnitzlein, Matthias A1 - Hu, Jingtao A1 - Liu, Linlin A1 - Würthner, Frank A1 - Xie, Zengqi T1 - Boron‐Locked Starazine – A Soluble and Fluorescent Analogue of Starphene JF - Chemistry – A European Journal N2 - A starlike heterocyclic molecule containing an electron‐deficient nonaaza‐core structure and three peripheral isoquinolines locked by three tetracoordinate borons, namely isoquinoline‐nona‐starazine (QNSA), is synthesized by using readily available reactants through a rather straightforward approach. This new heteroatom‐rich QNSA possesses a quasi‐planar π‐backbone structure, and bears phenyl substituents on borons which protrude on both sides of the π‐backbones endowing it with good solubility in common organic solvents. Contrasting to its starphene analogue, QNSA shows intense fluorescence with a quantum yield (PLQY) of up to 62 % in dilute solution. KW - conjugated molecule KW - electronic structure KW - luminescence KW - starazine KW - starphene analogue Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-276423 VL - 28 IS - 29 ER - TY - JOUR A1 - Full, Julian A1 - Panchal, Santosh P. A1 - Götz, Julian A1 - Krause, Ana‐Maria A1 - Nowak‐Król, Agnieszka T1 - Modulare Synthese helikal‐chiraler Organobor‐Verbindungen: Ausschnitte verlängerter Helices JF - Angewandte Chemie N2 - Zwei Arten helikal-chiraler Verbindungen mit einem oder zwei Boratomen wurden nach einem modularen Ansatz synthetisiert. Die Bildung der helikalen Strukturen erfolgte durch Einführung von Bor in flexible Biaryl- bzw. Triaryl-Vorstufen, hergestellt aus kleinen achiralen Bausteinen. Die durchgehend ortho-fusionierten Azabora[7]helicene zeichnen sich dabei durch außergewöhnliche Konfigurationsstabilität, blaue oder grüne Fluoreszenz in Lösung mit Quantenausbeuten (Φ\(_{fl}\)) von 18–24 %, grüne oder gelbe Emission im Festkörper (Φ\(_{fl}\) bis zu 23 %) und starke chiroptische Resonanz mit großen Anisotropiefaktoren von bis zu 1.12×10\(^{-2}\) aus. Azabora[9]helicene, aufgebaut aus winkelförmig sowie linear angeordneten Ringen, sind blaue Emitter mit Φ\(_{fl}\) von bis zu 47 % in CH\(_{2}\)Cl\(_{2}\) und 25 % im Festkörper. DFT-Rechnungen zeigen, dass ihre P-M-Interkonversion über einen komplexeren Weg verläuft als im Fall von H1. Röntgenstrukturanalyse von Einkristallen zeigt deutliche Unterschiede in der Packungsanordnung von Methyl- und Phenylderivaten auf. Die Moleküle werden als Primärstrukturen verlängerter Helices vorgeschlagen. KW - Chiralität KW - Fluoreszenz KW - Helicen KW - Organobor KW - Zirkulardichroismus Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-224385 VL - 133 IS - 8 SP - 4396 EP - 4403 ER - TY - JOUR A1 - Mueller, Stefan A1 - Lüttig, Julian A1 - Malý, Pavel A1 - Ji, Lei A1 - Han, Jie A1 - Moos, Michael A1 - Marder, Todd B. A1 - Bunz, Uwe H. F. A1 - Dreuw, Andreas A1 - Lambert, Christoph A1 - Brixner, Tobias T1 - Rapid multiple-quantum three-dimensional fluorescence spectroscopy disentangles quantum pathways JF - Nature Communications N2 - Coherent two-dimensional spectroscopy is a powerful tool for probing ultrafast quantum dynamics in complex systems. Several variants offer different types of information but typically require distinct beam geometries. Here we introduce population-based three-dimensional (3D) electronic spectroscopy and demonstrate the extraction of all fourth- and multiple sixth-order nonlinear signal contributions by employing 125-fold (1⨯5⨯5⨯5) phase cycling of a four-pulse sequence. Utilizing fluorescence detection and shot-to-shot pulse shaping in single-beam geometry, we obtain various 3D spectra of the dianion of TIPS-tetraazapentacene, a fluorophore with limited stability at ambient conditions. From this, we recover previously unknown characteristics of its electronic two-photon state. Rephasing and nonrephasing sixth-order contributions are measured without additional phasing that hampered previous attempts using noncollinear geometries. We systematically resolve all nonlinear signals from the same dataset that can be acquired in 8 min. The approach is generalizable to other incoherent observables such as external photoelectrons, photocurrents, or photoions. KW - Atomic and molecular interactions with photons KW - Optical spectroscopy Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-202529 VL - 10 ER - TY - THES A1 - Muzha, Andreas T1 - Herstellung und Charakterisierung kolloidaler Lösungen diamantbasierter und verwandter Materialien T1 - Preparation and characterization of colloidal solutions of diamond-based and related materials N2 - In der vorliegenden Publikation wurden stabile kolloidale Lösungen aus CVD-Diamant, Detonationsdiamant sowie artverwandten Materialien hergestellt und charakterisiert Besonderes Augenmerk wurde bei der Zerkleinerung von CVD Diamant daraufgelegt, dass die nanoskaligen Partikel ihre materialspezifischen Eigenschaften auch bei Reduktion der Größe beibehalten. Systematisch wurde die Zerkleinerung in einer Planetenmühle analysiert. Es wurde sowohl die minimal erreichbare Partikelgröße, als auch die Menge an erzeugtem, nanoskaligem Material bewertet. Um die Vermahlung zu verbessern, wurden die Geschwindigkeit der Mühle, die Größe der Mahlkörper, die Dauer der Vermahlung, sowie die eingesetzten Lösemittel variiert. Des Weiteren konnten durch die Vermahlung unterschiedlich hergestellter CVD Diamantfilme in einer Vibrationsmühle die Einflüsse von Schichtdicke und Korngröße der Diamantkristalle untersucht werden. Durch Bearbeitung von Detonationsdiamanten und Kohlenstoffnanozwiebeln wurden stabile kolloidale Lösungen hergestellt, mit Partikelgrößen im unteren Nanometerbereich. Diese sind im alkalischen pH-Bereich stabil sein, hierfür wurde durch Luft und Säureoxidation oxidierter Detonationsdiamant und oxidierte Kohlenstoffnanozwiebeln hergestellt. Mithilfe der thermogravimetrischen Analyse und Infrarotspektroskopie wurde die hierfür optimale Temperatur und Dauer bestimmt. N2 - In the present publication, stable colloidal solutions of CVD diamond, detonation diamond and related materials were produced and characterized. During the grinding of CVD diamond, special attention was paid to ensuring that the nanoscale particles retain their material-specific properties even when their size is reduced. The grinding in a planetary mill was analyzed systematically. Both the minimum achievable particle size and the amount of nanoscale material produced were evaluated. In order to improve the grinding, the speed of the mill, the size of the grinding media, the duration of the grinding and the solvents used were varied. Furthermore, the influences of layer thickness and grain size of the diamond crystals could be investigated by grinding differently produced CVD diamond films in a vibration mill. Stable colloidal solutions were prepared from detonation diamonds and carbon nano onions, with particle sizes in the sub-nanometer range. These are stable in alkaline pH range. For this purpose oxidized detonation diamond and oxidized carbon nano onions were modified by air and acid oxidation. The optimum temperature and duration for this was determined with the aid of thermogravimetric analysis and infrared spectroscopy. KW - Diamant KW - Kolloid / Lösung KW - Detonationsdiamant KW - CVD-Diamant KW - Kohlenstoffnanozwiebel Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-296685 ER - TY - THES A1 - Selby, Joshua T1 - Design and Chiroptical Properties of Chirally Substituted Indolenine Squaraine Mono-, Oligo-, and Polymers T1 - Design und chiroptische Eigenschaften von chiral substituierten Indolenin-Squarain-Mono-, Oligo- und Polymeren N2 - A series of monomeric chirally substituted indolenine squaraine monomers were successfully synthesized and utilized for the construction of various oligo- and polymers, in order to study their chiroptical properties in terms of exciton chirality. The quaternary carbon atom at the 3-position of the indolenine subunit, as well as the alkyl side chain attached to the indolenine nitrogen were selected as the most suitable site for chiral functionalization. For the C(3)-chiral derivatives, two synthetic routes depending on the desired substitution at the stereogenic center were established. The chiral side chains were prepared via Evans asymmetric alkylation where the resulting branching point at the 2 position constituted the chiral center. While the chiral substitution only had minor effects on the linear optical properties and geometric structure of the chromophore, all compounds exhibited a distinct and measurable CD signal that correlated with the distance of the chiral center to the central chromophore. Polymers bearing chiral side chains exhibited a solvent- and temperature-dependent helix-coil equilibrium, which was influenced by the type of side chain used. CD spectroscopy revealed the helical conformation to possess a preferred twist sense, and temperature-dependent measurements showed the degree of homohelicity to be nearly complete in certain cases. Furthermore, a CPL signal was able to be obtained for the helical conformer of one polymer. Various (co)oligo- and polymers comprising the C(3)-chiral monomers only displayed a solvent-independent J-type absorption behavior and thus did not form helical conformations in solution. CD spectroscopy revealed a solvent-dependent adoption of quasi-enantiomeric conformers, which was elucidated by quantum chemical TDDFT calculations. N2 - Eine Reihe von monomeren, chiral substituierten Indolenin-Squarain-Monomeren wurde erfolgreich synthetisiert und für die Konstruktion verschiedener Oligo- und Polymere verwendet, um ihre chiroptischen Eigenschaften in Bezug auf die Exzitonenchiralität zu untersuchen. Als geeignete Stelle für die chirale Funktionalisierung wurden das quartäre Kohlenstoffatom an der 3-Position der Indolenineinheit sowie die an den Indolenin- Stickstoff gebundene Alkylseitenkette ausgewählt. Für die C(3)-chiralen Derivate wurden je nach gewünschter Substitution am stereogenen Zentrum zwei Synthesrouten etabliert. Die chiralen Seitenketten wurden über eine asymmetrische Evans-Alkylierung synthetisiert, wobei der resultierende Verzweigungspunkt an der 2-Position das chirale Zentrum darstellte. Während die chirale Substitution nur geringe Auswirkungen auf die linearen optischen Eigenschaften und die geometrische Struktur des Chromophors hatte, zeigten alle Verbindungen ein deutliches und messbares CD-Signal, das mit dem Abstand des chiralen Zentrums zum zentralen Chromophor korrelierte. Polymere mit chiralen Seitenketten zeigten ein lösungsmittel- und temperaturabhängiges Helix-Knäuel-Gleichgewicht, das durch die Art der verwendeten Seitenkette beeinflusst wurde. Durch CD Spektroskopie konnte gezeigt werden, dass die helikale Konformation einen bevorzugten Drehsinn besitzt. Temperaturabhängige CD Messungen zeigten, dass der Grad der Homohelizität in bestimmten Fällen nahezu vollständig ist. Weiterhin konnte für das helikale Konformer eines Polymers ein CPL-Signal erhalten werden. Verschiedene (Co)oligo- und Polymere bestehend aus den C(3)-chiralen Monomere zeigten nur ein lösungsmittelunabhängiges J- Typ Absorptionsverhalten und bildeten daher in Lösung keine helikalen Konformationen. CD-Spektroskopie zeigte eine lösungsmittelabhängige Annahme von quasi-enantiomeren Konformationen, was durch quantenchemische TDDFT-Rechnungen aufgeklärt wurde. KW - Squaraine KW - Oligomere KW - Polymere KW - Chiralität KW - Chemische Synthese KW - Asymmetrische Synthese KW - CD-Spektroskopie KW - Helix-Knäuel-Umwandlung KW - J- and H-Aggregate KW - Asymmetric synthesis KW - Helix-Coil-Transition KW - J- and H-Aggregates KW - Circular dichroism Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-282067 ER - TY - JOUR A1 - Menekse, Kaan A1 - Renner, Rebecca A1 - Mahlmeister, Bernhard A1 - Stolte, Matthias A1 - Würthner, Frank T1 - Bowl-shaped naphthalimide-annulated corannulene as nonfullerene acceptor in organic solar cells JF - Organic Materials N2 - An electron-poor bowl-shaped naphthalimide-annulated corannulene with branched alkyl residues in the imide position was synthesized by a palladium-catalyzed cross-coupling annulation sequence. This dipolar compound exhibits strong absorption in the visible range along with a low-lying LUMO level at –3.85 eV, enabling n-type charge transport in organic thin-film transistors. Furthermore, we processed inverted bulk-heterojunction solar cells in combination with the two donor polymers PCE–10 and PM6 to achieve open-circuit voltages up to 1.04 V. By using a blend of the self-assembled naphthalimide-annulated corannulene and PCE–10, we were able to obtain a power conversion efficiency of up to 2.1%, which is to the best of our knowledge the highest reported value for a corannulene-based organic solar cell to date. KW - Chemie KW - corannulene KW - nonfullerene acceptors KW - curved π-systems KW - bulk-heterojunction solar cells KW - aggregation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-299095 UR - https://www.thieme-connect.com/products/ejournals/html/10.1055/s-0040-1714283 SN - 2625-1825 VL - 2 IS - 3 ER - TY - THES A1 - Wolf, Natalia T1 - Synthese multifunktionaler Farbstoffe und Linker zur Visualisierung biologischer Strukturen T1 - Synthesis of multifunctional dyes and linkers for visualization of biological structures N2 - Durch stetige Entwicklung der Mikroskopiemethoden in den letzten Jahrzehnten ist es nun möglich Strukturen und Abläufe in biologischen Systemen detaillierter darzustellen als mit der von Abbe entdeckten maximalen Auflösungsgrenze. Oft werden dabei Fluoreszenzmarker benutzt, welche die unsichtbare Welt der Mikrobiologie und deren biochemische Prozesse illuminieren. Diese werden entweder durch Expression, wie z.B. das grün fluoreszierende Protein (GFP), in das zu untersuchende Objekt eingebracht oder durch klassische Markierungsmethoden mithilfe von fluoreszierenden Immunkonjugaten installiert. Jedoch gewinnt eine alternative Strategie, die von der interdisziplinären Zusammenarbeit zwischen Chemikern, Physikern und Biologen profitiert, immer mehr an Bedeutung – die bioorthogonale Click-Chemie. Sie ermöglicht eine effiziente Fluoreszenzmarkierung der biologischen Strukturen unter minimalem Eingriff in die Abläufe der Zelle. Dazu müssen allerdings sowohl Farbstoffe als auch die biologisch aktiven Substanzen chemisch modifiziert werden, da nur dadurch die Bioorthogonalität gewährleistet werden kann. Mittlerweile existiert eine breite Palette an fluoreszierenden Farbstoffen, die das komplette sichtbare Spektrum abdecken und sich für diverse Mikroskopiemethoden eignen. Allerdings gibt es zwei Farbstoffklassen, die sich aus der gesamten Fülle abheben und sich für hochauflösende bildgebende Experimente auf Einzelmolekülebene eignen. Zum einen ist es die Farbstofffamilie der Cyanine und insbesondere der wasserlöslichen Pentamethincyanine, die reversibel und kontrolliert zum Photoschalten animiert werden können und in der stochastisch optischen Rekonstruktionsmikroskopie Anwendung finden. Zum anderen ist es die Gruppe, der Rhodamine und Fluoresceine, die zu Xanthenfarbstoffen gehören und sich durch gute photophysikalische Eigenschaften auszeichnen. Trotz der Beliebtheit stellt ihre Darstellung immer noch eine Herausforderung dar und limitiert deren Einsatz. Deshalb war es notwendig im Rahmen der vorliegenden Arbeit Möglichkeiten zur Syntheseoptimierung beider Farbstoffklassen zu finden, damit diese im Folgenden weiterentwickelt und an die biologische Fragestellung angepasst werden können. Die Arbeit unterteilt sich deshalb in Relation an die oben genannten Farbstoffklassen in zwei Bereiche. Im ersten Teil wurden Projekte basierend auf den wasserlöslichen Pentamethincyaninen behandelt. Im zweiten Teil beschäftigte sich die Arbeit mit Projekten, die auf Xanthen-Farbstoffen aufbauen. N2 - Due to steady development in microscopy methods during the last decades its now possible to visualize biological structures in more detail than Abbes low would allow. Frequently fluorescence labeling is used to illuminate the world of microbiology and its processes. There are two classical methods to introduce fluorescent markers to the target of interest. The first way is to use the expression of fluorescent proteins like GFP (green fluorescent protein). The second one is the application of fluorescent immunoconjugates. However, an alternative strategy that benefits from the interdisciplinary cooperation between chemists, physicists and biologists is becoming increasingly important – bioorthogonal click chemistry. It enables efficient fluorescent labelling of biological structures with minimal influence in cell processes. But this requires chemical modification of both dyes and the biologically active substances, as this is the only way to guarantee bioorthogonal click reactions. In the meantime, a wide range of fluorescent dyes is available that cover the entire visible spectrum and are suitable for various microscopy methods. However, there are two classes of dyes that stand out from the rest and are suitable for high-resolution imaging experiments at the single molecule level. On the one hand, there is the dye family of cyanines and in particular the water-soluble pentamethine cyanines, which can be reversibly and in a controlled manner animated to photoswitch. Therefore, they are used in stochastic optical reconstruction microscopy like dStorm. On the other hand, there is the group of rhodamines and fluoresceins, which belong to xanthene dyes and are characterized by good photophysical properties. Despite their popularity, their synthesis still poses a challenge and limits their use. Therefore, it was necessary to find ways to optimize the synthesis of both dye classes within the scope of the present work, so that they can be further developed and adapted to the biological question. This thesis is therefore divided into two parts in relation to the two above mentioned dye classes. In the first part three projects based on the water-soluble pentamethine cyanines were addressed. In the second part the work dealt with projects based on the HMSiR-dyes. KW - Farbstoff KW - Cyanin KW - Rhodaminderivate KW - Click-Chemie KW - Farbstoffsynthese KW - Pentamethincyanine KW - Siliziumrhodaminderivate KW - bioorthogonale Click-Chemie KW - Synthese Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-205312 ER - TY - JOUR A1 - Schneider-Schaulies, Sibylle A1 - Schumacher, Fabian A1 - Wigger, Dominik A1 - Schöl, Marie A1 - Waghmare, Trushnal A1 - Schlegel, Jan A1 - Seibel, Jürgen A1 - Kleuser, Burkhard T1 - Sphingolipids: effectors and Achilles heals in viral infections? JF - Cells N2 - As viruses are obligatory intracellular parasites, any step during their life cycle strictly depends on successful interaction with their particular host cells. In particular, their interaction with cellular membranes is of crucial importance for most steps in the viral replication cycle. Such interactions are initiated by uptake of viral particles and subsequent trafficking to intracellular compartments to access their replication compartments which provide a spatially confined environment concentrating viral and cellular components, and subsequently, employ cellular membranes for assembly and exit of viral progeny. The ability of viruses to actively modulate lipid composition such as sphingolipids (SLs) is essential for successful completion of the viral life cycle. In addition to their structural and biophysical properties of cellular membranes, some sphingolipid (SL) species are bioactive and as such, take part in cellular signaling processes involved in regulating viral replication. It is especially due to the progress made in tools to study accumulation and dynamics of SLs, which visualize their compartmentalization and identify interaction partners at a cellular level, as well as the availability of genetic knockout systems, that the role of particular SL species in the viral replication process can be analyzed and, most importantly, be explored as targets for therapeutic intervention. KW - glycosphingolipids KW - ceramides KW - sphingosine 1-phosphate KW - sphingomyelinase KW - HIV KW - SARS-CoV-2 KW - measles Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-245151 SN - 2073-4409 VL - 10 IS - 9 ER - TY - JOUR A1 - Hofmann, Julian A1 - Fayez, Shaimaa A1 - Scheiner, Matthias A1 - Hoffmann, Matthias A1 - Oerter, Sabrina A1 - Appelt‐Menzel, Antje A1 - Maher, Pamela A1 - Maurice, Tangui A1 - Bringmann, Gerhard A1 - Decker, Michael T1 - Sterubin: Enantioresolution and Configurational Stability, Enantiomeric Purity in Nature, and Neuroprotective Activity in Vitro and in Vivo JF - Chemistry – A European Journal N2 - Alzheimer′s disease (AD) is a neurological disorder with still no preventive or curative treatment. Flavonoids are phytochemicals with potential therapeutic value. Previous studies described the flavanone sterubin isolated from the Californian plant Eriodictyon californicum as a potent neuroprotectant in several in vitro assays. Herein, the resolution of synthetic racemic sterubin (1) into its two enantiomers, (R)‐1 and (S)‐1, is described, which has been performed on a chiral chromatographic phase, and their stereochemical assignment online by HPLC‐ECD coupling. (R)‐1 and (S)‐1 showed comparable neuroprotection in vitro with no significant differences. While the pure stereoisomers were configurationally stable in methanol, fast racemization was observed in the presence of culture medium. We also established the occurrence of extracted sterubin as its pure (S)‐enantiomer. Moreover, the activity of sterubin (1) was investigated for the first time in vivo, in an AD mouse model. Sterubin (1) showed a significant positive impact on short‐ and long‐term memory at low dosages. KW - Alzheimer′s disease KW - chiral resolution KW - circular dichroism KW - Eriodictyon californicum KW - flavonoids KW - sterubin Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-215993 VL - 26 IS - 32 SP - 7299 EP - 7308 ER - TY - JOUR A1 - Kim, Jin Hong A1 - Liess, Andreas A1 - Stolte, Matthias A1 - Krause, Ana-Maria A1 - Stepanenko, Vladimir A1 - Zhong, Chuwei A1 - Bialas, David A1 - Spano, Frank A1 - Würthner, Frank T1 - An Efficient Narrowband Near-Infrared at 1040 nm Organic Photodetector Realized by Intermolecular Charge Transfer Mediated Coupling Based on a Squaraine Dye JF - Advanced Materials N2 - A highly sensitive short-wave infrared (SWIR, λ > 1000 nm) organic photodiode (OPD) is described based on a well-organized nanocrystalline bulk-heterojunction (BHJ) active layer composed of a dicyanovinyl-functionalized squaraine dye (SQ-H) donor material in combination with PC\(_{61}\)BM. Through thermal annealing, dipolar SQ-H chromophores self-assemble in a nanoscale structure with intermolecular charge transfer mediated coupling, resulting in a redshifted and narrow absorption band at 1040 nm as well as enhanced charge carrier mobility. The optimized OPD exhibits an external quantum efficiency (EQE) of 12.3% and a full-width at half-maximum of only 85 nm (815 cm\(^{-1}\)) at 1050 nm under 0 V, which is the first efficient SWIR OPD based on J-type aggregates. Photoplethysmography application for heart-rate monitoring is successfully demonstrated on flexible substrates without applying reverse bias, indicating the potential of OPDs based on short-range coupled dye aggregates for low-power operating wearable applications. KW - squaraine dyes KW - crystal engineering KW - J-aggregates KW - near-infrared sensitivity KW - organic photodiodes Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-256374 VL - 33 IS - 26 ER - TY - JOUR A1 - Lehmann, Matthias A1 - Dechant, Moritz A1 - Weh, Dominik A1 - Freytag, Emely T1 - Metal Phthalocyanine−Fullerene Dyads: Promising Lamellar Columnar Donor−Acceptor Liquid Crystal Phases JF - ChemPlusChem N2 - Liquid crystal (LC) shape‐amphiphiles with a disc tethered to a fullerene have been intensely studied for the application in photovoltaics, and helical nanosegregation of C\(_{60}\) has been claimed around the π‐stacking disks based on X‐ray results. The most promising materials reported to date have been resynthesized and studied comprehensively by XRS, density measurements, modelling, and electron density reconstruction. In contrast to previous reports, the results indicate that metal phthalocyanine−fullerene mesogens pack in lamellar columnar phases with p2gm symmetry. Fullerenes assemble in layers and are flanked by phthalocyanine columns, thus explaining the balanced charge carrier mobility of electrons and holes. Such variable donor−acceptor structures are promising for organic electronic applications. KW - Donor−acceptor dyads KW - fullerenes KW - liquid crystals KW - nanosegregation KW - shape-amphiphiles Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-218531 VL - 85 IS - 8 SP - 1934 EP - 1938 ER - TY - JOUR A1 - Shen, Chia-An A1 - Bialas, David A1 - Hecht, Markus A1 - Stepanenko, Vladimir A1 - Sugiyasu, Kazunori A1 - Würthner, Frank T1 - Polymorphism in squaraine dye aggregates by self-assembly pathway differentiation: panchromatic tubular dye nanorods versus J-aggregate nanosheets JF - Angewandte Chemie International Edition N2 - A bis(squaraine) dye equipped with alkyl and oligoethyleneglycol chains was synthesized by connecting two dicyanomethylene substituted squaraine dyes with a phenylene spacer unit. The aggregation behavior of this bis(squaraine) was investigated in non-polar toluene/tetrachloroethane (98:2) solvent mixture, which revealed competing cooperative self-assembly pathways into two supramolecular polymorphs with entirely different packing structures and UV/Vis/NIR absorption properties. The self-assembly pathway can be controlled by the cooling rate from a heated solution of the monomers. For both polymorphs, quasi-equilibrium conditions between monomers and the respective aggregates can be established to derive thermodynamic parameters and insights into the self-assembly mechanisms. AFM measurements revealed a nanosheet structure with a height of 2 nm for the thermodynamically more stable polymorph and a tubular nanorod structure with a helical pitch of 13 nm and a diameter of 5 nm for the kinetically favored polymorph. Together with wide angle X-ray scattering measurements, packing models were derived: the thermodynamic polymorph consists of brick-work type nanosheets that exhibit red-shifted absorption bands as typical for J-aggregates, while the nanorod polymorph consists of eight supramolecular polymer strands of the bis(squaraine) intertwined to form a chimney-type tubular structure. The absorption of this aggregate covers a large spectral range from 550 to 875 nm, which cannot be rationalized by the conventional exciton theory. By applying the Essential States Model and considering intermolecular charge transfer, the aggregate spectrum was adequately reproduced, revealing that the broad absorption spectrum is due to pronounced donor-acceptor overlap within the bis(squaraine) nanorods. The latter is also responsible for the pronounced bathochromic shift observed for the nanosheet structure as a result of the slip-stacked arranged squaraine chromophores. KW - organic chemistry KW - supramolecular polymers KW - nanorods and nanosheets KW - polymorphism KW - squaraine dyes KW - cooperative self-assembly Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-256443 IS - 21 ET - 60 ER -