TY - INPR A1 - Fersch, Daniel A1 - Malý, Pavel A1 - Rühe, Jessica A1 - Lisinetskii, Victor A1 - Hensen, Matthias A1 - Würthner, Frank A1 - Brixner, Tobias T1 - Single-Molecule Ultrafast Fluorescence-Detected Pump–Probe Microscopy N2 - We introduce fluorescence-detected pump–probe microscopy by combining a wavelength-tunable ultrafast laser with a confocal scanning fluorescence microscope, enabling access to the femtosecond time scale on the micrometer spatial scale. In addition, we obtain spectral information from Fourier transformation over excitation pulse-pair time delays. We demonstrate this new approach on a model system of a terrylene bisimide (TBI) dye embedded in a PMMA matrix and acquire the linear excitation spectrum as well as time-dependent pump–probe spectra simultaneously. We then push the technique towards single TBI molecules and analyze the statistical distribution of their excitation spectra. Furthermore, we demonstrate the ultrafast transient evolution of several individual molecules, highlighting their different behavior in contrast to the ensemble due to their individual local environment. By correlating the linear and nonlinear spectra, we assess the effect of the molecular environment on the excited-state energy. KW - Fluoreszenz KW - Ultrafast spectroscopy KW - Single-molecule microscopy Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-313485 ER - TY - THES A1 - Mims, David T1 - Einblicke in die Spinchemie durch Untersuchung des Magnetfeldeffektes in rigide gebundenen Radikalionenpaaren T1 - Insights into the field of spin chemistry by studying the magnetic field effect in rigidly bound radical ion pairs N2 - Synthese starrer Donor-Akzeptor-Verbindungen und Untersuchung des Magnetfeldeffektes auf Lebenszeit resultierender Biradikale mittels optischer Spektroskopie. N2 - Synthesis of rigid donor-acceptor compounds and investigation of the magnetic field effect on the lifetimes of resulting biradicals using optical spectroscopy. KW - Magnetfeldeffekt KW - Radikalpaar KW - Biradikal KW - Präparative organische Chemie KW - Physikalische Chemie KW - Spinchemie Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-303547 ER - TY - JOUR A1 - Pinzner, Florian A1 - Keller, Thorsten A1 - Mut, Jürgen A1 - Bechold, Julian A1 - Seibel, Jürgen A1 - Groll, Jürgen T1 - Polyoxazolines with a vicinally double-bioactivated terminus for biomacromolecular affinity assessment JF - Sensors N2 - Interactions between proteins and carbohydrates with larger biomacromolecules, e.g., lectins, are usually examined using self-assembled monolayers on target gold surfaces as a simplified model measuring setup. However, most of those measuring setups are either limited to a single substrate or do not allow for control over ligand distance and spacing. Here, we develop a synthetic strategy, consisting of a cascade of a thioesterification, native chemical ligation (NCL) and thiol-ene reaction, in order to create three-component polymer conjugates with a defined double bioactivation at the chain end. The target architecture is the vicinal attachment of two biomolecule residues to the α telechelic end point of a polymer and a thioether group at the ω chain end for fixating the conjugate to a gold sensor chip surface. As proof-of-principle studies for affinity measurements, we demonstrate the interaction between covalently bound mannose and ConA in surface acoustic wave (SAW) and surface plasmon resonance (SPR) experiments. KW - polyoxazolines KW - functionalization KW - lectin Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-239530 SN - 1424-8220 VL - 21 IS - 9 ER - TY - THES A1 - Roos, Lena T1 - Synthese unterschiedlicher Tetracene und Untersuchung ihrer optischen und elektronischen Eigenschaften T1 - Synthesis of tetracene derivatives and investigation of their optical and electronical properties N2 - Mittels einer fünfstufigen Synthese wurde das 2,2´-Ditetracen als Modellsystem zur Erforschung von singlet fission-Prozessen hergestellt. Die Synthese wurde mit einer Gesamtausbeute von 21 % durchgeführt, wobei der Schlüsselschritt, die Kopplung der beiden Monomere, durch eine Suzuki-Kopplung erfolgte. Das gewünschte Produkt konnte nach gründlicher Reinigung mittels Gradientensublimation als leuchtend rote Einkristalle erhalten werden. Während die Emissionsspektren der Einzelmoleküle nahezu identisch sind, zeigen Untersuchungen mittels Photolumineszenzspektroskopie eine Rotverschiebung im Emissionsspektrum des Dimer-Einkristalls im Vergleich zum Einkristall des Tetracen-Monomers. Durch theoretische Berechnung konnte die Absenkung des S1-Zustands des Dimers im Kristall erklärt werden, wodurch die Energiebedingung für singlet fission (2 E(T1) ≤ E(S1)) nicht mehr erfüllt ist. Weiterhin wurden mehrere mit Alkylgruppen und Vinylgruppen substituierte Tetracenderivate synthetisiert und diese mittels optischer und elektrochemischer Methoden auf ihre Eigenschaften hin untersucht. Es wurde bei allen synthetisierten Derivaten eine Rotverschiebung der Hauptbanden im Absorptionsspektrum beobachtet, was durch einen kleineren HOMO-LUMO-Abstand im Vergleich zum nicht substituierten Tetracen erklärt wird. Es wurde zudem eine erhöhte Stabilität dieser Derivate gegenüber Umwelteinflüssen wie Licht und Sauerstoff, die die Bildung von Endoperoxiden und Dimeren zur Folge haben, festgestellt. Dies kann auf sterische Effekte sowie die Stabilisierung des biradikalischen Zustands dieser Moleküle durch Hyperkonjugation und Resonanzeffekte zurückgeführt werden. N2 - In a five-step synthesis, the 2,2'-ditetracene was prepared as a model system to study singlet fission processes. The synthesis was carried out with an overall yield of 21%, and the key step, the coupling of the two monomers, was carried out by a Suzuki coupling. The desired product was obtained as bright red single crystals after purification by gradient sublimation. While the emission spectra of the single molecules are nearly identical, investigations by photoluminescence spectroscopy show a red shift in the emission spectrum of the dimer single crystal compared to the single crystal of the tetracene monomer. Theoretical calculation could explain the lowering of the S1 state of the dimer in the crystal, which means that the energy condition for singlet fission (2 E(T1) ≤ E(S1)) is no longer fulfilled. Furthermore, several with alkyl groups and vinyl groups substituted tetracenes derivatives were synthesized and their properties were investigated by optical and electrochemical measurements. A red shift of the peaks in the absorption spectrum was observed for all synthesized derivatives, which is explained by a smaller HOMO-LUMO distance compared to the unsubstituted tetracene. Increased stability of these derivatives to environmental effects such as light and oxygen, resulting in the formation of endoperoxides and dimers, was also observed. This can be attributed to steric effects as well as stabilization of the biradical character of these molecules by hyperconjugation and resonance effects. KW - Polycyclische Aromaten KW - Naphthacenderivate KW - Chemische Synthese KW - Tetracenderivate KW - Polycyclische aromatische Kohlenwasserstoffe KW - Tetracene derivatives KW - Polycyclic aromatic hydrocarbons KW - singlet fission Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-313268 ER - TY - THES A1 - Merz, Viktor T1 - Funktionalisierung und Untersuchung von Nanodiamanten für biomedizinische und sensorische Anwendungen T1 - Functionalization and Investigation of Nanodiamonds for Biomedical and Sensor Applications N2 - Nanodiamant (ND) ist ein vielseitiges und vielversprechendes Material für Bio-Anwendungen. Trotz vieler Bemühungen bleibt die Agglomeration von Nanodiamant und die unspezifische Adsorption von Proteinen an der ND-Oberfläche bei Kontakt mit Bioflüssigkeiten ein großes Hindernis für biomedizinische Anwendungen. Eine Auswahl verzweigter und linearer Moleküle mit überlegener Fähigkeit zur kolloidalen Stabilisierung von Nanopartikeln in Salz- und Zellmedienumgebung, für bis zu 30 Tage, wurde an die ND-Oberfläche angebracht. Das Baukastensystem mit Azid als Außengruppen bietet eine große Vielfalt an Bindungen mit vielen Molekülen, wie z. B. Medikamenten, Farbstoffen oder Targeting-Molekülen. Das Anhängen von z. B. Zwitterionen an die Kette schützt die ND-Oberfläche vor der Bildung einer Proteinkorona, wenn die Partikel mit proteinhaltigen Bioflüssigkeiten in Kontakt kommen. Die Ergebnisse der thermogravimetrischen Analyse der Beladung der ND-Oberfläche zeigen eine signifikante Verhinderung der Proteinadsorption von bis zu 98 % im Vergleich zu NDs ohne zwitterionische Kopfgruppen und eine lange kolloidale Stabilität, wenn Tetraethylenglykol (TEG) an die Oberfläche gebunden wird. Die Vielseitigkeit des modularen Systems, um nicht nur zwitterionische Ketten, sondern auch klickbare funktionelle Moleküle an fluoreszierende Nanodiamanten (fNDs) zu binden, zeigt das Potenzial des Systems am Nanodiamanten. Unter Verwendung von Defektstrukturen, wie Stickstoff-Vakanz-Zentren (NV), können Diamantpartikel aufgrund ihres weitgehend ungiftigen Verhaltens als fluoreszierende Nanodiamanten (fNDs) für photostabile Markierung, Bioimaging und nanoskalige Sensorik in lebenden Zellen und Organismen verwendet werden. Um die fND-Oberfläche zu funktionalisieren, wurde eine neuartige Mahltechnik mit Diazoniumsalzen etabliert, um ein Pfropfen auf wenig reaktive HPHT-fNDs durchzuführen, was zu einer hohen Oberflächenbeladung und einem hohen negativen Zetapotenzial führt. Die Kombination der Vorteile von TEG und zwitterionhaltigen Gruppen mit der Fähigkeit zum Targeting von Antikörpern auf fND bestätigt zum ersten Mal die verbesserte kolloidale Stabilität in Experimenten mit lebenden Zellen. Darüber hinaus deuten die Ergebnisse auf eine verbesserte Corona-Abstoßung im Vergleich zu fND ohne zwitterionhaltige Kopfgruppen hin. Infolgedessen wurden die Zirkulationszeiten von 4 (fND ohne Zwitterionenkette, aber mit Antikörper) auf 17 (mit Antikörper und Zwitterionenketten) Stunden vergrößert. In nicht-biomedizinischen Anwendungen kann das modulare System als Sonde für Schwermetalle durch die Anbindung von Farbstoffen verwendet werden. Die Detektion von Metallen in verschiedenen Umgebungen mit hoher Selektivität und Spezifität ist eine der Voraussetzungen für den Kampf gegen die Umweltverschmutzung mit diesen Elementen. Pyrene sind gut geeignet und weit bekannt für die Fluoreszenzsensorik in verschiedenen Medien. Das angewandte Sensorprinzip beruht typischerweise auf der Bildung von intra- und intermolekularen Excimeren, was jedoch den Empfindlichkeitsbereich aufgrund der Maskierung von z.B. Quenching-Effekten durch die Excimer-Emission einschränkt. Diese Studie zeigt einen hochselektiven, strukturstabilen chemischen Sensor, der auf der monomeren Fluoreszenz von Pyrenanteilen mit Triazolgruppen basiert. Dieser Sensor kann Cu2+, Pb2+ und Hg2+ in organischen Lösungsmitteln über einen weiten Konzentrationsbereich quantitativ nachweisen, auch in Gegenwart von ubiquitären Ionen wie Na+, K+, Ca2+ und Mg2+. Die stark emittierende Fluoreszenz des Sensors mit einer langen Lebensdauer von 165 ns wird durch eine 1:1-Komplexbildung bei Zugabe von Metallionen in Acetonitril gelöscht. Bei Zugabe eines zehnfachen Überschusses des Metallions zum Sensor bilden sich Agglomerate mit einem Durchmesser von etwa 3 nm. Aufgrund der komplexen Wechselwirkungen im System werden konventionelle lineare Korrelationen nicht für alle Konzentrationen beobachtet. Daher wird ein kritischer Vergleich zwischen der konventionellen Job-Plot-Interpretation, der Methode von Benesi-Hildebrand und einem nicht-linearen Fit vorgestellt. Das vorgestellte System ermöglicht die spezifische und robuste Erfassung von medizinisch und ökologisch relevanten Ionen im gesundheitsrelevanten nM-Bereich und könnte z. B. zur Überwachung der entsprechenden Ionen in Abfallströmen eingesetzt werden. Doch häufig landen diese Abfallströme in empfindlichen Aquakulturen, wo eine solche Sensortechnik nur funktioniert, wenn die Sonde wasserlöslich ist, um die Ausbreitung und Bildung von Umweltschäden durch Schwermetalle zu überwachen. Viele Chemosensoren arbeiten nur in bestimmten Lösungsmitteln und unter hochreinen Bedingungen quantitativ. In dieser Arbeit wird eine Methode zur Stabilisierung von wasserunlöslichen Chemosensoren auf Nanodiamanten in salzhaltigem Wasser unter Beibehaltung der Sensoreffektivität und -spezifität sowie der kolloidalen Stabilität vorgestellt. Zusätzlich wird die Sensorfähigkeit in organischen Lösungsmitteln beibehalten. Diese Studie gibt Einblick in die Absorptionsfähigkeit von Pyren-Derivaten an der Nanodiamant-Oberfläche und einen Weg, diese reversibel zu desorbieren. Außerdem beweist das System, dass in Anwesenheit von 95 % Sauerstoffatmosphäre bei der Fluoreszenzmessung die Ergebnisse nicht von denen in Argonatmosphäre abweichen. Darüber hinaus stört das Vorhandensein gängiger Ionen im Wasser die kolloidale Stabilität der NDs nicht und hat auch keinen Einfluss auf die Sensorfunktionalität und ist somit ein vielversprechender Kandidat für Messungen ohne aufwändige Präparationsschritte. N2 - Nanodiamond (ND) is a versatile and promising material for bio-applications. Despite many efforts, agglomeration of nanodiamond and the non-specific adsorption of proteins on the ND surface when exposed to bio-fluids remains a major obstacle for biomedical applications. An assortment of branched and linear molecules with superior ability to colloidally stabilize nanoparticles in salt and cell media environment, for up to 30 days, was attached to the ND’s surface. The building box system with azide as external groups offers a huge variety of binding with many molecules, such as drugs, dyes or targeting molecules, is possible. Clicking, for instance, zwitterions moieties to the chain protects ND surface from protein corona forming when the particles get in contact with biofluids containing proteins. Thermogravimetric analysis results of the ND surface loading show a significant prevention of up to 98 % of the protein adsorption compared with NDs without zwitterionic headgroups and long colloidal stability when tetraethylene glycol (TEG) are attached to the surface. The versatility of the modular system to bind not only zwitterionic chains but also clickable functional molecules to fluorescent nanodiamonds (fNDs) demonstrates the potential of the system at the nanodiamond. Using defect structures, such as nitrogen-vacancy (NV) centers, diamond particles, due to their widely non-toxic behavior, can be used as fNDs for photostable labeling, bioimaging and nanoscale sensing in living cells and organisms. To functionalize the fND surface a novel milling technique with diazonium salts was established to perform grafting on poorly reactive HPHT fNDs yielding in high surface loading and high negative zeta potential. Combining the benefits of TEG and zwitterion containing groups with antibody enabled nucleus targeting ability on fND confirms the enhanced colloidal stability in living cells experiments for the first time. Furthermore, the results indicate an improved corona repulsion compared with fND without zwitterion containing headgroups. As a result, the circulation times were enlarged from 4 (fND without zwitterion chain but with antibody) to 17 (with antibody and zwitterion chains) hours. In non-biomedical applications, the modular system can be used as a probe for heavy metals by binding it to dyes. Detection of metals in different environments with high selectivity and specificity is one of the prerequisites of the fight against environmental pollution with these elements. Pyrenes are well suited and known for fluorescence sensing in different media. The applied sensing principle typically relies on the formation of intra- and intermolecular excimers, which is however limiting the sensitivity range due to masking of e.g. quenching effects by the excimer emission. This study shows a highly selective, structurally rigid chemical sensor based on the monomer fluorescence of pyrene moieties bearing triazole groups. This probe can quantitatively detect Cu2+, Pb2+ and Hg2+ in organic solvents over a broad concentration range, even in the presence of ubiquitous ions such as Na+, K+, Ca2+ and Mg2+. The strongly emissive sensor’s fluorescence with a long lifetime of 165 ns is quenched by a 1:1 complex formation upon addition of metal ions in acetonitrile. Upon addition of a tenfold excess of the metal ion to the sensor, agglomerates with a diameter of about 3 nm are formed. Due to complex interactions in the system, conventional linear correlations are not observed for all concentrations. Therefore, a critical comparison between the conventional Job plot interpretation, the method of Benesi-Hildebrand, and a non-linear fit is presented. The reported system enables the specific and robust sensing of medically and environmentally relevant ions in the health-relevant nM range and could be used e.g. for the monitoring of the respective ions in waste streams. Nonetheless, often these waste streams end up in sensitive aquacultures, where such sensor technology only works if the probe is water-soluble to monitor the spread and formation of environmental damage from heavy metals. Many chemosensors only work quantitatively in specific solvents and under highly pure conditions. In this thesis a method to stabilize water-insoluble chemosensors on nanodiamonds in saline water while maintaining the sensor efficacy and specificityas as well as colloidal stability is presented. Additionally, the sensor capability is retained in organic solvents. This study provides insight into the absorptivity of pyrene derivatives to the nanodiamond surface and a way to reversibly desorb them. Moreover, the system proves that in presence of 95 % oxygen atmosphere while the fluoresce measurement the results of the do not vary from the one in argon atmosphere. Furthermore, the presence of common ions in water do not disturb the colloidal stability of the NDs and also no influence the sensor functionality and thus is highly promising candidate for measurement without cumbersome preparation steps. KW - Chemosensor KW - Nanodiamant KW - Kolloidalstabilität KW - Protein Corona KW - Targeting Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-245888 ER - TY - THES A1 - Roos, Markus T1 - Synthesis, Photophysics and Photocatalysis of [FeFe] Complex Containing Dyads and Bimolecular Systems T1 - Synthese, Photophysik und Photokatalyse von [FeFe]-Komplex enthaltenden Dyaden und bimolekularen Systemen N2 - In the course of this work, a total of three photocatalytically active dyads for proton reduction could be synthesized together with the associated individual components. Two of them, D1 and D2, comprised a [Ru(bpy)3]2+ photosensitizer and D3 an [Ir(ppy)2bpy]+ photosensitizer. A Ppyr3-substituted propyldithiolate [FeFe] complex was used as catalyst in all systems. The absorption spectroscopic and electrochemical investigations showed that an inner-dyadic electronic coupling is effectively prevented in the dyads due to conjugation blockers within the bridging units used. The photocatalytic investigations exhibited that all dyad containing two-component systems (2CS) showed a significantly worse performance than the corresponding bimolecular three-component systems (3CS). Transient absorption spectroscopy showed that the 2CS behave very similarly to the associated multicomponent systems during photocatalysis. The electron that was intended for the intramolecular transfer from the photosensitizer unit to the catalyst unit within the dyads remains at the photosensitizer for a relatively long time, analogous to the 3CS and despite the covalently bound catalyst. It is therefore assumed that this intramolecular electron transfer is likely to be hindered as a result of the weak electronic coupling caused by the bridge units used. Instead, the system bypasses this through an intermolecular transfer to other dyad molecules in the immediate vicinity. In addition, with the help of emission quenching experiments and electrochemical investigations, it could be clearly concluded that all investigated systems proceed via the reductive quenching mechanism during photocatalysis. N2 - Im Rahmen dieser Arbeit konnten insgesamt drei photokatalytisch aktive Dyaden zur Protonenreduktion zusammen mit den zugehörigen Einzelkomponenten synthetisiert werden. Zwei von ihnen, D1 und D2, umfassten einen [Ru(bpy)3]2+-Photosensibilisator und D3 einen [Ir(ppy)2bpy]+-Photosensibilisator. Als Katalysator wurde in allen Systemen ein Ppyr3-substituierter Propyldithiolat-[FeFe]-Komplex verwendet. Die absorptionsspektroskopischen und elektrochemischen Untersuchungen zeigten, dass eine innerdyadische elektronische Kopplung aufgrund von Konjugationsblockern innerhalb der verwendeten Brückeneinheiten wirksam verhindert wird. Die photokatalytischen Untersuchungen zeigten, dass alle dyadenhaltigen Zweikomponentensysteme (2CS) eine signifikant schlechtere Leistung zeigten als die entsprechenden bimolekularen Dreikomponentensysteme (3CS). Mithilfe der transienten Absorptionsspektroskopie konnte gezeigt werden, dass sich die 2CS während der Photokatalyse sehr ähnlich wie die zugehörigen Mehrkomponentensysteme verhalten. Das Elektron, das für den intramolekularen Transfer von der Photosensibilisatoreinheit zur Katalysatoreinheit innerhalb der Dyaden vorgesehen war, verbleibt analog zu den 3CS und trotz des kovalent gebundenen Katalysators relativ lange am Photosensibilisator. Es wird daher angenommen, dass dieser intramolekulare Elektronentransfer wahrscheinlich aufgrund der schwachen elektronischen Kopplung, die durch die verwendeten Brückeneinheiten verursacht wird, behindert wird. Stattdessen umgeht das System dies durch einen intermolekularen Transfer zu anderen Dyadenmolekülen in unmittelbarer Nähe. Darüber hinaus konnte mithilfe von Emissionslöschungsexperimenten und elektrochemischen Untersuchungen eindeutig darauf geschlossen werden, dass alle untersuchten Systeme während der Photokatalyse über den reduktiven Löschmechanismus ablaufen. KW - Fotokatalyse KW - Elektronentransfer KW - proton reduction KW - [FeFe] hydrogenase mimic KW - dyad KW - ruthenium photosensitizer KW - iridium photosensitizer KW - Protonenreduktion KW - [FeFe]-Hydrogenase Imitator KW - Dyade KW - Ruthenium-Photosensibilisator KW - Iridium-Photosensibilisator Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234537 ER - TY - JOUR A1 - Brust, Felix A1 - Nagler, Oliver A1 - Shoyama, Kazutaka A1 - Stolte, Matthias A1 - Würthner, Frank T1 - Organic Light‐Emitting Diodes Based on Silandiol‐Bay‐Bridged Perylene Bisimides JF - Advanced Optical Materials N2 - Perylene bisimides (PBIs) are among the best fluorophores but have to be enwrapped for optoelectronic applications by large and heavy substituents to prevent their ππ‐stacking, which is known to accelerate non‐radiative decay processes in the solid state. Here, light‐weight di‐tert‐butylsilyl groups are introduced to bridge 1,12‐dihydroxy and 1,6,7,12‐tetrahydroxy PBIs to afford sublimable dyes for vacuum‐processed optoelectronic devices. For both new compounds, this substitution provides a twisted and shielded perylene π‐core whose, via OSiObridges, rigid structure affords well‐resolved absorption and emission spectra with strong fluorescence in solution, as well as in the solid state. The usefulness of these dyes for vacuum‐processed optoelectronic devices is demonstrated in organic light‐emitting diodes (OLEDs) that show monomer‐like emission spectra and high maximum external quantum efficiency (EQEmax) values of up to 3.1% for the doubly silicon‐bridged PBI. KW - organic light emitting diodes KW - perylene bisimide dyes KW - rigidification KW - solid‐state emission KW - vacuum processable Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-312599 VL - 11 IS - 5 ER - TY - JOUR A1 - Schmidt, David A1 - Stolte, Matthias A1 - Süß, Jasmin A1 - Liess, Dr. Andreas A1 - Stepanenko, Vladimir A1 - Würthner, Frank T1 - Protein-like enwrapped perylene bisimide chromophore as bright microcrystalline emitter material JF - Angewandte Chemie International Edition N2 - Strongly emissive solid‐state materials are mandatory components for many emerging optoelectronic technologies, but fluorescence is often quenched in the solid state owing to strong intermolecular interactions. The design of new organic pigments, which retain their optical properties despite their high tendency to crystallize, could overcome such limitations. Herein, we show a new material with monomer‐like absorption and emission profiles as well as fluorescence quantum yields over 90 % in its crystalline solid state. The material was synthesized by attaching two bulky tris(4‐tert‐butylphenyl)phenoxy substituents at the perylene bisimide bay positions. These substituents direct a packing arrangement with full enwrapping of the chromophore and unidirectional chromophore alignment within the crystal lattice to afford optical properties that resemble those of their natural pigment counterparts, in which chromophores are rigidly embedded in protein environments. KW - cristal engeneering KW - dyes KW - flourescence quantum yield KW - perylene bisimides KW - solid-state emitters Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204809 VL - 58 IS - 38 ER - TY - JOUR A1 - Griesbeck, Stefanie A1 - Michail, Evripidis A1 - Rauch, Florian A1 - Ogasawara, Hiroaki A1 - Wang, Chenguang A1 - Sato, Yoshikatsu A1 - Edkins, Robert M. A1 - Zhang, Zuolun A1 - Taki, Masayasu A1 - Lambert, Christoph A1 - Yamaguchi, Shigehiro A1 - Marder, Todd B. T1 - The Effect of Branching on One- and Two-Photon Absorption, Cell Viability and Localization of Cationic Triarylborane Chromophores with Dipolar versus Octupolar Charge Distributions for Cellular Imaging JF - Chemistry - A European Journal N2 - Two different chromophores, namely a dipolar and an octupolar system, were prepared and their linear and nonlinear optical properties as well as their bioimaging capabilities were compared. Both contain triphenylamine as the donor and a triarylborane as the acceptor, the latter modified with cationic trimethylammonio groups to provide solubility in aqueous media. The octupolar system exhibits a much higher two‐photon brightness, and also better cell viability and enhanced selectivity for lysosomes compared with the dipolar chromophore. Furthermore, both dyes were applied in two‐photon excited fluorescence (TPEF) live‐cell imaging. KW - boranes KW - cell imaging KW - fluerescence KW - lysosome KW - two-photon excited fluorescence Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204829 VL - 25 IS - 57 ER - TY - THES A1 - Roger, Chantal T1 - Photophysics and Spin Chemistry of Triptycene Bridge Donor-Acceptor-Triads T1 - Photophysik und Spinchemie von Triptycen Brücken Donor-Akzeptor Triaden N2 - The goal of this thesis was to investigate the influence of rotational restriction between individual parts and of the varying electron density in the bridging unit of D B A systems on the exchange interaction 2J, and thus the electronic coupling between a donor state and an acceptor state. A better understanding of how to influence the underlaying spin dynamics in such donor acceptor systems can open up the door to new technologies, such as modern molecular electronics or optoelectronic devices. Therefore, three series of molecules consisting of a TAA electron donor, a TTC or ATC bridging unit and a PDI electron acceptor were studied. To investigate the influence of rotational restriction on 2J and the electronic coupling, a series of four rotationally hindered triads (chapter 6) was synthesised. The dihedral angle between the TAA and the TTC as well as between the TTC and the PDI was restricted by ortho methyl groups at the phenylene linkers of the connecting ends to the TTC bridge, producing a twist around the linking single bond which minimises the π overlap. The triads exhibit varying numbers of ortho methyl groups and therefore different degrees of rotational restriction. In order to shine light on the influence of varying electron density on 2J and the electronic coupling, a series of four substituted triptycene triads (chapter 7) was synthesised. The electron density in the TTC bridging unit was varied by electron donating and electron withdrawing groups in 12,13 position of the TTC bridging unit and thus varying its HOMO/LUMO energy. The last series of two anthracene bridge triads (chapter 8) connected both approaches by restricting the rotation with ortho methyl groups and simultaneously by varying the bridge energies. In order to obtain the electronic properties, steady state absorption and emission spectra of all triads were investigated (chapter 4). Here, all triads show spectral features associated with the separate absorption bands of TAA and the PDI moiety. The reduced QYs, compared to the unsubstituted PDI acceptor, indicate a non radiative quenching mechanism in all triads. The CV data (chapter 5) were used to calculate the energies of possible CSSs and those results were used to assign the CR dynamics into the different Marcus regions. fs TA measurements reveal that all triads form a CSS upon excitation of the PDI moiety. The lifetimes of the involved states and the rate constants were determined by global exponential fits and global target analysis. The CR dynamics upon depopulation of the CSSs were investigated using external magnetic field dependent ns TA spectroscopy. The ns TA maps show that all triads recombine via CRT pathway populating the local 3PDI state in toluene and provided the respective lifetimes. The approximate QYs of triplet formation were determined using actinometry. The magnetic field dependent ns TA data reveal the exchange interaction 2J between singlet and triplet CSS for each triad. Those magnetic field dependent ns TA data in toluene were furthermore treated using a quantum mechanical simulation (done by U.E. Steiner) to extract the rate constants kT and kS for CRT and CRS, respectively. However, the error margins of kS were rather wide. Finally, the electronic couplings between the donor and the acceptor states were obtained by combining the aforementioned experimental results of the rate constants and applying the Bixon Jortner theoretical description of diabatic ET and Andersons perturbative theory of the exchange coupling. Therefore, the experimentally determined values of 2J and the calculated values of kCS and kT were used. The rate constant kS was calculated based on the electronic coupling V1CSS 1S0. The rotationally hindered triads (chapter 6) show a strong influence of the degree of rotational restriction on the lifetimes and rate constants of the CS processes. The rate constants of CS are increasing with increasing rotational freedom. The magnetic field dependent decay data show that the exchange interactions increase with increasing rotational freedom. Based on the CR dynamics, the calculated electronic couplings of the ET processes reflect the same trend along the series. Here, only singlet couplings turned out to be strongly influenced while the triplet couplings are not. Therefore, this series shows that the ET dynamics of donor acceptor systems can strongly be influenced by restricting the rotational freedom. In the substituted triptycene triads (chapter 7), decreasing electron density in the bridging unit causes a decrease of the CS rate constants. The magnetic field dependent decay data show that with decreasing electron density in the bridge the exchange interaction decreases. The CR dynamics-based rate constants and the electronic couplings follow the same trend as the exchange interaction. This series shows that varying the HOMO/LUMO levels of the connecting bridge between donor and acceptor strongly influences the ET processes. In the anthracene bridge triads (chapter 8), the CS process is slow in both triads. The CR was fast in the anthracene triad and is slowed down in the methoxy substituted anthracene bridge triad. The increase of the exchange interaction with increasing electron density in the bridge was more pronounced than in the substituted triptycene triads. Thus, the variation of electron density in the bridge strongly influences the ET processes even though the rotation is restricted. In this thesis, it was shown that the influence of the rotational hindrance as well as the electron density in a connecting bridge have strong influence on all ET processes and the electronic coupling in donor acceptor systems. These approaches can therefore be used to modify magnetic properties of new materials. N2 - Das Ziel dieser Arbeit war es, den Einfluss von Rotationshinderung zwischen einzelnen Bausteinen und Variation der Elektronendichte in der Brückeneinheit eines Donor Brücke Akzeptor Systems auf die Austauschwechselwirkung 2J und somit die elektronische Kopplung zwischen dem Donor- und dem Akzeptor-Zustand zu untersuchen. Ein besseres Verständnis der zugrundeliegenden Spindynamiken in solchen Donor Akzeptor Systemen - und wie diese beeinflusst werden können - kann einen Zugang zu neuen Technologien wie molekularer Elektronik oder optoelektronischen Geräten ermöglichen. Im Zuge dessen wurden drei Molekülreihen, bestehend aus einem TAA Elektronendonor, einer TTC oder ATC Brücke und einem PDI Elektronenakzeptor, untersucht. Der Einfluss von eingeschränkter Rotation zwischen den einzelnen Bausteinen auf die Austauschwechselwirkung und die elektronische Kopplung wurde anhand einer Reihe von rotationsgehinderten Triaden (Kapitel 6) untersucht. Der Winkel zwischen der TAA und der TTC Einheit sowie zwischen der TTC und der PDI Einheit wurde durch ortho ständige Methylgruppen eingeschränkt. Dies führt zu einer Verdrillung um die verbrückende Einfachbindung. Um unterschiedliche Grade der Rotationshinderung zu erzielen, wurden die Triaden mit einer unterschiedlichen Anzahl von ortho Methylgruppen substituiert. Des Weiteren wurde eine Reihe, bestehend aus vier Triptycen substituierten Triaden (Kapitel 7), synthetisiert, um den Einfluss variierender Elektronendichte auf 2J und die elektronische Kopplung zu untersuchen. Die Elektronendichte in der TTC-Brückeneinheit wurde durch elektronenschiebende und elektronenziehende Gruppen in 12,13-Position an der TTC-Brückeneinheit variiert, was eine Änderung der HOMO/LUMO-Energien der Brücke zur Folge hat. Die letzte Reihe besteht aus zwei Anthracen verbrückten Triaden (Kapitel 8) und stellt die Kombination beider Ansätze dar. Um dies zu erzielen wurde die Rotation durch ortho-Methylgruppen vollständig unterdrückt und gleichzeitig die Brückenenergie verändert. Um die elektronischen Eigenschaften der Triaden zu untersuchen, wurden zunächst die stationären Absorptions und Emissionseigenschaften betrachtet (Kapitel 4). Die Absorptionsbanden können in allen Triaden der TAA sowie der PDI Einheit zugeordnet werden. Die Fluoreszenz Quantenausbeuten weisen, verglichen mit dem reinen PDI Akzeptor, deutlich geringere Werte auf. Dies deutet auf einen alternativen, nicht strahlenden Desaktivierungspfad hin. Mit Hilfe der CV Daten (Kapitel 5) wurde die Energie des ladungsgetrennten Zustandes für jede Triade berechnet und die Ladungsrekombinationspfade in die jeweiligen Marcus Regionen eingeordnet. fs transiente Absorptionsmessungen zeigen, dass alle Triaden einen ladungsgetrennten Zustand ausbilden. Die Lebenszeiten der beteiligten Zustände wurden mit Hilfe eines globalen exponentiellen Fits und die Ratenkonstanten mit Hilfe einer globalen Targetanalyse bestimmt. Die Ladungsrekombinationsdynamiken wurden mit Hilfe magnetfeldabhängiger ns transienter Absorptionsmessungen betrachtet. Die ns transienten Karten zeigen, dass alle Triaden in Toluol über den Triplett Rekombinationspfad in den lokalen Triplettzustand des PDI rekombinieren. Des Weiteren lieferten diese Messungen die Lebenszeiten des ladungsgetrennten Zustandes. Die Quantenausbeuten der Bildung des Triplettzustandes wurden mittels Actinometrie abgeschätzt. Mit Hilfe der magnetfeldabhängigen ns transienten Messungen konnte die Austauschwechselwirkung zwischen dem singulett und dem triplett ladungsgetrennten Zustand für jede Triade bestimmt werden. Um die Ratenkonstanten kT and kS der Triplett und Singulett Rekombination zu erhalten, wurden die Daten der magnetfeldabhängigen ns transienten Messungen mittels einer quantendynamischen Simulation untersucht (durchgeführt von U. E. Steiner, Universität Konstanz). Hierbei waren die Fehlergrenzen für kS jedoch sehr groß. Die elektronischen Kopplungen wurden mit Hilfe der Bixon Jortner Theorie des diabatischen elektronen Transfers und Andersons störungstheoritischem Ansatz zur Beschreibung der Austauschwechselwirkung aus den experimentellen Daten sowie den Ratenkonstanten berechnet. Hierfür wurden die die experimentell bestimmten 2J Werte sowie die berechneten Werte von kCS und kT verwendet. Um ein umfassendes Bild zu erhalten wurden die Ratenkonstanten kS aus den elektronischen Kopplungen V1CSS 1S0 berechnet. Die rotationsgehinderten Triaden (Kapitel 6) weisen eine starke Abhängigkeit der Ratenkonstanten des Ladungstrennungsprozesses vom Grad der Rotationseinschränkung auf. Hierbei steigen die Werte der Ratenkonstanten mit zunehmender Rotationsfreiheit. Der selbe Trend kann in der Austauschwechselwirkung bei Betrachtung der magnetfeldabhängigen Abklingkurven beobachtet werden. Des Weiteren zeigen die berechneten elektronischen Kopplungen ebenfalls eine Zunahme bei gesteigerter Rotationsfreiheit. Hierbei war zu beobachten, dass nur die Singulett Kopplungen von der Rotation beeinflusst wurden, Triplett Kopplungen jedoch nahezu unverändert blieben. Mit Hilfe dieser Reihe wurde gezeigt, dass Elektrontransferdynamiken durch Rotationseinschränkung beeinflusst werden können. In der Reihe der substituierten Triptycen Triaden (Kapitel 7) führt eine Abnahme der Elektronendichte in der Brücke zu einer Verringerung der Ratenkonstanten des Ladungstrennungsprozesses. Die Daten der magnetfeldabhängigen Abklingkurven zeigen, dass die Austauschwechselwirkung ebenfalls mit verringerter Elektronendichte in der Brücke abnimmt. Die berechneten elektronischen Kopplungen folgen dem Trend der Austauschwechselwirkung. Anhand dieser Reihe konnte gezeigt werden, dass Elektronentransferprozesse durch Veränderung der Brückenenergien beeinflusst werden können. In den Anthracen Brücken Triaden (Kapitel 8) ist die Ladungstrennung für beide Triaden langsam. Die Ladungsrekombination wird durch den elektronenschiebenden Effekt der Methoxygruppen, verlangsamt. Die Austauschwechselwirkung nimmt mit steigender Elektronendichte in der Brücke zu, wobei dieser Effekt stärker ausgeprägt ist als in den Triptycen substituierten Triaden. Die Variation der Elektronendichte hat somit, trotz vollständig gehinderter Rotation, einen starken Einfluss auf die Elektronentransferdynamiken. In dieser Arbeit konnte gezeigt werden, dass gehinderte Rotation und variierende Elektronendichte in einer Brückeneinheit einen starken Einfluss auf die Elektronentransferdynamiken und die elektronischen Kopplungen in Donor Akzeptor-Systemen haben. Diese Ansätze können somit dazu verwendet werden die magnetischen Eigenschaften von neuen Materialien zu verändern. KW - spin chemistry KW - Spinchemie KW - donor-acceptor triads KW - Donor-Akzeptor Triaden KW - Rotation KW - photophysics KW - electron transfer KW - rotation KW - electron density Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-363031 ER -