TY - THES A1 - Carrera, Eva-Maria T1 - Modifikation von Calciumphosphat-Biokeramiken mit biologisch aktiven Metallionen T1 - Modification of calcium phosphate bioceramics with biologically active metal ions N2 - Das Ziel dieser Arbeit war es, die Modifizierung von porösem, calciumdefizitärem, nanokristallinem Hydroxylapatit mit verschiedenen Metallionen zu testen. Es wurden α‑TCP‑basierende Zementproben hergestellt, die durch zwei verschiedene Dotierungsmethoden mit bestimmten Metallionen (Cu2+, Co2+, Mn2+, Ni2+, V3+, Zn2+) modifiziert wurden. Die eine Methode bestand in der Zusinterung der entsprechenden Metallionen zum α‑TCP‑Pulver. Bei der anderen Methode waren die Ionen in unterschiedlicher Konzentration (1 mmolar, 100 μmolar, 10 μmolar) in der Binderlösung enthalten. Die hergestellten Zementproben wurden hinsichtlich bestimmter Eigenschaften wie der initialen Abbindezeit und Druckfestigkeit untersucht und zusätzlich rasterelektronenmikroskopischen, röntgen-diffraktometrischen und massenspektrometrischen Analysen unterzogen. Als Referenz diente ein bereits am Menschen erfolgreich als Knochenersatzmaterial eingesetzter nanokristalliner, calciumarmer Hydroxylapatit-Zement. Da Hydroxylapatit nahezu nur durch Osteoklasten mittels einer lokalen pH‑Wert-Absenkung resorbiert werden kann, wurden in‑vitro‑Versuche mit einer immortalisierten Makrophagen-Zelllinie durchgeführt. Über einen 15‑tägigen Versuchszeitraum wurde die Zytokompatibilität mittels bestimmter Zellproliferations- und Zellaktivitätsmessungen überprüft. Zusätzlich wurden die mit Zellen besiedelten Proben unter dem Rasterelektronenmikroskop betrachtet und eine TRAP‑Färbung durchgeführt, um die Differenzierung zu osteoklastenähnlichen Zellen beurteilen zu können. Bei der Auswertung der Versuche wurde deutlich, dass nicht das Metall alleine maßgeblich für Veränderungen der physikalischen Eigenschaften im Vergleich zum metallfreien Referenzzement war. Auch die Art der Metallionendotierung, ob durch Zugabe mit der Binderlösung oder durch Zusinterung, hatte bei den Metallen unterschiedliche Auswirkungen auf die Zementeigenschaften. Während der Versuche wurden Abbindezeiten von 18 Minuten bis über 60 Minuten gemessen und Druckfestigkeiten zwischen 9,3 MPa und 30,5 MPa festgestellt. Bei der Auswertung der Zellversuchsreihe wurde festgestellt, dass die Zellen auf den mit Metallionen modifizierten Zementplättchen tendenziell eine niedrigere Aktivität bei gleich bleibender Proliferation aufwiesen als auf den metallfreien Referenzproben. Dieses Ergebnis konnte mikroskopisch bestätigt werden. N2 - The aim of this work was to test the modification of porous, calcium deficient, nanocrystalline hydroxyapatite with various metal ions. α‑TCP‑based cement samples were prepared which were modified by two different doping methods with specific metal ions (Cu2+, Co2+, Mn2+, Ni2+, V3+, Zn2+). One method consisted in the sintering of the corresponding metal ions to the α‑TCP powder. In the other method the ions were contained in the binder solution in varying concentrations (1 mmolar, 100 μmolar, 10 μmolar). The cement samples produced were examined with regard to certain properties such as the initial setting time and compressive strength, and were additionally subjected to scanning electron microscopy, X-ray diffractometry and mass spectrometry analyzes. A nanocrystalline, calcium-poor hydroxylapatite cement, which has already been successfully used as a bone replacement material in humans, served as a reference. Since hydroxylapatite can be resorbed almost exclusively by osteoclasts by means of a local pH reduction, in vitro experiments with an immortalized macrophage cell line were performed. Cytocompatibility was tested by means of certain cell proliferation and cell activity measurements over a 15-day experimental period. In addition, the cells populated with cells were observed under the scanning electron microscope and a TRAP staining was performed to evaluate the differentiation to osteoclast-like cells. In the evaluation of the experiments, it became clear that the metal alone was not decisive for changes in the physical properties compared to the metal-free reference cement. The nature of the metal ion doping, whether by addition with the binder solution or by sintering, had different effects on the cements properties of the metals. During the tests, setting times of 18 minutes to over 60 minutes were measured and compressive strengths between 9,3 MPa and 30,5 MPa were determined. In the evaluation of the cell test series, it was found that the cells on the metal ions modified cement platelets tended to have a lower activity with a constant proliferation than on the metal-free reference samples. This result could be confirmed microscopically. KW - Knochenzement KW - Calciumphosphat KW - Hydroxylapatit KW - α‑Tricalciumphosphat Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-141338 ER - TY - JOUR A1 - Geffers, Martha A1 - Groll, Jürgen A1 - Gbureck, Uwe T1 - Reinforcement strategies for load-bearing calcium phosphate biocements JF - Materials N2 - Calcium phosphate biocements based on calcium phosphate chemistry are well-established biomaterials for the repair of non-load bearing bone defects due to the brittle nature and low flexural strength of such cements. This article features reinforcement strategies of biocements based on various intrinsic or extrinsic material modifications to improve their strength and toughness. Altering particle size distribution in conjunction with using liquefiers reduces the amount of cement liquid necessary for cement paste preparation. This in turn decreases cement porosity and increases the mechanical performance, but does not change the brittle nature of the cements. The use of fibers may lead to a reinforcement of the matrix with a toughness increase of up to two orders of magnitude, but restricts at the same time cement injection for minimal invasive application techniques. A novel promising approach is the concept of dual-setting cements, in which a second hydrogel phase is simultaneously formed during setting, leading to more ductile cement-hydrogel composites with largely unaffected application properties. KW - in vitro KW - synergistic reinforcement KW - dihydrate cement KW - porosity KW - mechanical properties KW - dual setting KW - calcium phosphate cements KW - fiber reinforcement KW - polyacrylic acid KW - compressive strength KW - balloon kyphoplasty KW - brushite cement KW - bone cement Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-148636 VL - 8 ER - TY - THES A1 - Bruns, Constanze T1 - Der Einfluss von Laktobazillen auf Oberfläche und Eigenschaften von verschiedenen Nahtmaterialien T1 - The influence of lactobacilli on surface and properties of various sutures N2 - Hintergrund: Nach oralchirurgischen Eingriffen empfiehlt der Operateur allgemein die Vermeidung von Milchprodukten in Hinblick auf eine bessere Heilung im Wundgebiet. Dies stützt sich u.a. auf die Annahme, dass Laktobazillen und ihre Stoffwechselprodukte (z.B. Milchsäure) Nahtmaterial angreifen können. Der Aufbau dieser Studie zielte darauf ab, diesen Sachverhalt in Frage zu stellen und Funktionsverluste bei Milchsäureexposition sowie Besieldungsverhalten der Bakterien zu charakterisieren. Material und Methoden: Polyamid (PA), Polyester/Polyethylenterephtalat (PET), Polypropylen (PP), Polyvinylidenfluorid (PVDF), Seide, Polyglycolsäure (PGA bzw. PGACL), teilweise mit Polylactid (PLA), Polydioxanon (PDO) und Polytetrafluorethylen (PTFE) kamen zur Anwendung. Die Fäden wurden mit L.acidophilus (LAC) beimpft, inkubiert und anschließen im Tensiometer mit verschiedenen Knotenvarianten getestet. Für die Keimbesiedlung (CFU) wurden die Fäden beimpft, inkubiert und das Keimmaterial anschließend mit Ultraschall- Vortex- Verfahren vom Faden abgelöst und ausgezählt. Dieses Verfahren wurde durch REM- Aufnahmen zusätzlich bewertet. Ergebnisse: Reißfestigkeiten waren stets im Rahmen der Herstellerangaben bzw. darüber zu verzeichnen. Alle resorbierbaren Fäden hatten höhere Ausgangsreißkräfte als die nichtresorbierbaren Produkte. Die Applikation eines Knotens minderte ausschlaggebend für alle Produkte die maximale Reißfestigkeit eines Materials. Die Knotenhaltbarkeiten konnten sich während der Liegezeit im sauren wässrigen Milieu verändern. Die für klinische Anwendungen besten Ergebnisse verzeichneten PA als nichtresorbierbare, monofiles PDO und polyfiles PGA/PLA + CHX als resorbierbare Vertreter. Eine erhöhte CFU-Zahl auf polyfilen Fäden im Vergleich zu monofilen Fäden wurde bestätigt. Seide (polyfil, nicht resorbierbar) hatte mit Abstand die höchsten CFU, gefolgt von PGACL (polyfil, resorbierbar). PVDF (monofil, nichtresorbierbar) hatte die niedrigsten CFU- Werte. Im Schnitt war die CFU-Zahl von PGA/PLA+CHX (polyfil, resorbierbar) ähnlich hoch wie die von monofilen Produkten. Diskussion: Die Annahme, dass eine Kontamination mit LAC den Heilungserfolg beeinflussen kann, wurde im Hinblick auf Materialermüdung durch Säureexposition aus Stoffwechselprodukten des Bakteriums entkräftet. Die für klinische Anwendungen besten Ergebnisse verzeichneten PA als nichtresorbierbare, polyfiles PGA/PLA + CHX als resorbierbare Vertreter. Alle getesteten Produkte entsprachen trotz LAC- Einwirkungen den Herstellerangaben und haben somit die materiellen Voraussetzungen einer vorhersagbaren Nahthaltbarkeit erbracht. N2 - Background: After oral surgery, the surgeon generally recommends avoiding dairy products in order to improve the healing process in the wound area. This is based on the assumption that the suture is affected by lactic acid, the metabolic product of lactobacilli contained in and may lead to woundinfections and material failures. The structure of this study aimes to characterize functional losses in lactic acid exposure and colonization patterns of bacteria. Materials and Methods: Nylon (PA), polyester / polyethylene terephthalate (PET), polypropylene (PP), polyvinylidene fluoride (PVDF), silk, polyglycolic acid (PGA or PGACL), some with polylactide (PLA), polydioxanone (PDO) and polytetrafluoroethylene (PTFE) were used. All sutures were inoculated with L. acidophilus (LAC), then incubated and tested with a tensiometer with various node variants. For counting the bacterial colonization (CFU), the threads were inoculated, incubated and seed material detached subsequently by use of ultrasonic or vortex method. This method was evaluated by REM images additionally. Results: Tensile strengths were always recorded within the manufacturer's specifications or slightly above. All absorbable sutures had higher initial tensile strength than the non-absorbable products. The application of a node decreased the maximum tensile strength of a material decesive for all the products tested. The node shelf life could change during the time exposed in an acidic aqueous medium. The best results for clinical applications have been reached by nonabsorbable nylon, monofilament PDO and polyfilament PGA / PLA + CHX as resorbable representatives. Increased CFU number on multifilament sutures as compared to monofilaments was confirmed. Silk (polyfil, non-resorbable) had by far the highest CFU, followed by PGACL (polyfil, absorbable). PVDF (monofilament, nonabsorbable)had the lowest CFU values. On average, the CFU number of PGA/PLA + CHX (polyfil, absorbable) was nearly the same as on monofilament products. Discussion: The assumption that contamination with LAC can influence the healing success was invalidated by acid exposure from metabolites of the bacteria in terms of material fatigue. Based on the results pierces the PGA / PLA + CHX product compared to other products by germ contamination tendency and above-average handling and performance out positively All products tested met despite LAC influences the manufacturer's instructions and therefore have the material conditions of a predictable suture durability provided. KW - Lactobacillus acidophilus KW - Laktobazillen KW - Nahtmaterial KW - Wundnaht KW - Milchsäure KW - Milchsäurebakterien KW - Reißfestigkeit KW - Wundinfektion KW - Orale Chirurgie, Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-132982 ER - TY - THES A1 - Keßler, Martina T1 - Biodegradable solvent cast films and solution electrospun meshes for the prevention of postsurgical adhesions T1 - Bioabbaubare aus der Lösung gegossene Filme und elektrogesponnenen Vliese zur Prävention von Gewebeadhäsionen N2 - Intraperitoneal adhesions are fibrous bands that connect tissues in the peritoneal cavity that are usually separated. These adhesions form as a consequence of trauma, inflammation or surgical interventions and often result in severe consequences such as chronic pain, small bowel obstructions or female infertility. The aim of this thesis was to develop a synthetic barrier device for adhesion prevention made of modified poly(lactide) [PLA]. Solid PLA films (SurgiWrap®) are already successfully in clinical use due to the good biocompatibility and the biodegradability of the material resulting in non-toxic degradation products since lactic acid is naturally part of the metabolic circles of the human body. Considering the brittleness and stiffness of the films, the long degradation time of several months as well as the need for suturing, there is potential for optimization. Through a copolymerization with the hydrophilic poly(ethylene glycol) [PEG], a reduction of the degradation time was intendend. Moreover, the copolymerization should also lead to an improvement of the mechanical properties of the films since PEG acts as plasticizer for PLA. Linear PLA-PEG-PLA triblock copolymers as well as star-shaped PEG-PLA copolymers were synthesized via standard ring opening polymerization to tailor the barrier properties. Besides solid films, solution electrospun meshes from PLA and the synthesized PEG-PLA copolymers were investigated for a potential application as well. Since suturing of a barrier additionally induces adhesion formation, alginate coated membranes were prepared in order to achieve self-adhesiveness. With the intention to reduce infections and consequently inflammation, electrospun meshes and solvent cast films were loaded with the antibacterial drug triclosan and drug release as well as antibacterial efficacy was investigated. Mechanical tests confirmed that through the variation of the PEG content and branching the mechanical properties can be tailored and are in good accordance with the glass transition temperatures [Tg] of the polymers. Consequently, potentially adequate mechanical properties for surgical handling as well as for the performance within the patient’s body were successfully achieved. Degradation studies revealed that the degradation time was significantly shorter for PEG-PLA membranes than for PLA films and with an appropriate PEG content could be adjusted to the intended time frame. Cell adhesion and viability tests confirmed the non-toxicity of the clinically used PLA films as well as of PEG-PLA films and meshes. With a bioadhesion test the benefit of an alginate coated side towards the pure PLA film concerning self-adhesiveness was successfully demonstrated. Moreover, optical evaluations and a T-peel test of different alginate coated PLA films showed that the cohesion between the chemically different layers was distinctly enhanced by the use of an appropriate PEG-PLA mesh as intermediate cohesion promoting layer. In in vitro release studies with triclosan loaded films a higher release was determined for PEG-PLA than for PLA films. In agar diffusion tests a higher and longer inhibition of staphylococcus aureus growth was observed confirming the release results. Moreover, drug loaded meshes (especially drug loaded after electrospinning) showed enhanced and elongated bacterial inhibition in comparison to films. N2 - Intraperitoneale Adhäsionen sind fibröse Bänder, die Gewebe in der Peritonealhöhle miteinander verbinden, die normalerweise voneinander getrennt sind. Diese Adhäsionen entstehen als Folge von Trauma, Entzündung oder chirurgischen Eingriffen und bringen oft schwerwiegende Folgen mit sich wie chronische Schmerzen, Dünndarmobstruktionen oder Unfruchtbarkeit bei Frauen. Ziel dieser Arbeit war es, synthetische Barrieren aus modifiziertem Poly(laktid) [PLA] für die Adhäsionsprävention zu entwickeln. PLA-Filme (SurgiWrap®) werden bereits erfolgreich klinisch eingesetzt aufgrund der guten Biokompatibilität und der Bioabbaubarkeit des Materials mit seinen ungiftigen Abbauprodukten, da Milchsäure natürlicher Bestandteil der metabolischen Zyklen im menschlichen Körper ist. Betrachtet man jedoch die Sprödigkeit und Steifigkeit der Filme, die lange Abbauzeit von mehreren Monaten sowie die Notwendigkeit des Annähens, erkennt man noch Verbesserungspotential. Durch eine Copolymerisation mit hydrophilem Poly(ethylen glykol) [PEG] wurde eine Reduktion der Abbauzeit angestrebt. Zusätzlich sollte die Copolymerisation zu einer Verbesserung der mechanischen Eigenschaften der Filme führen, da PEG als Weichmacher von PLA dient. Lineare PLA-PEG-PLA-Triblock-Copolymere sowie sternförmige PEG-PLA-Copolymere wurden über eine Standard-Ringöffnungspolymerisation synthetisiert um die Barriereeigenschaften maßzuschneidern. Neben massiven Filmen wurden aus der Lösung elektrogesponnene Vliese aus PLA und den synthetisierten PEG-PLA-Copolymeren für eine potentielle Anwendung untersucht. Da das Annähen einer Barriere zusätzlich Adhäsionsbildung hervorruft, wurden mit Alginat beschichtete Membranen hergestellt um eine Selbsthaftung zu erreichen. Mit der Intention, Infektionen und damit Entzündungen zu reduzieren, wurden elektrogesponnene Vliese und aus der Lösung gegossene Filme mit dem antibakteriellen Arzneistoff Triclosan beladen und die Freisetzung sowie die antibakterielle Wirksamkeit untersucht. Mechanische Tests bestätigten, dass mit der Variation von PEG-Gehalt und Verzweigung die mechanischen Eigenschaften zugeschnitten werden können und gut mit den Glasübergangstemperaturen der Polymere in Einklang stehen. Folglich konnten potentiell passende mechanische Eigenschaften für die chirurgische Handhabung sowie für das Verhalten im Körper des Patienten erfolgreich erreicht werden. Abbaustudien zeigten, dass die Abbauzeit von PEG-PLA-Membranen signifikant kürzer war als von PLA-Filmen und mit geeignetem PEG-Gehalt erfolgreich auf den erzielten Zeitraum hin angepasst werden konnte. Zelladhäsion und Zellviabilitätstests bestätigten die Ungiftigkeit der klinisch eingesetzten PLA-Filme sowie der PEG-PLA-Filme und –Vliese. Mit einem Bioadhäsionstest konnte der Nutzen einer Alginatbeschichtung gegenüber einem reinen PLA-Film bezüglich einer Selbsthaftung erfolgreich gezeigt werden. Außerdem ergaben visuelle Begutachtungen und ein T-Peeltest von verschiedenen mit Alginat beschichteten PLA-Filmen, dass die Kohäsion zwischen den chemisch unterschiedlichen Schichten durch den Einsatz eines geeigneten PEG-PLA-Vlieses als kohäsionsfördernde Zwischenschicht deutlich verstärkt wurde. In in vitro Freisetzungsstudien mit Triclosan-beladenen Filmen wurde eine höhere Freisetzung für PEG-PLA- als für PLA-Filme bestimmt. In Agardiffusionstests wurde eine höhere und längere Wachstumshemmung von Staphylococcus aureus beobachtet, was die Freisetzungsergebnisse bestätigt. Weiterhin zeigten Arzneistoff-beladene Vliese (insbesondere mit Arzneistoffbeladung nach dem Elektrospinning) eine verstärkte und verlängerte bakterielle Inhibition im Vergleich zu Filmen. KW - Polymere KW - Biologischer Abbau KW - Polyethylenglykole KW - postsurgical adhesion KW - biodegradable polymer KW - Polymilchsäure KW - Adhäsion KW - polylactid KW - polyethylenglykole KW - Blockcopolymere Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129358 ER - TY - JOUR A1 - Hochleitner, Gernot A1 - Jüngst, Tomasz A1 - Brown, Toby D A1 - Hahn, Kathrin A1 - Moseke, Claus A1 - Jakob, Franz A1 - Dalton, Paul D A1 - Groll, Jürgen T1 - Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing JF - Biofabrication N2 - The aim of this study was to explore the lower resolution limits of an electrohydrodynamic process combined with direct writing technology of polymer melts. Termed melt electrospinning writing, filaments are deposited layer-by-layer to produce discrete three-dimensional scaffolds for in vitro research. Through optimization of the parameters (flow rate, spinneret diameter, voltage, collector distance) for poly-ϵ-caprolactone, we could direct-write coherent scaffolds with ultrafine filaments, the smallest being 817 ± 165 nm. These low diameter filaments were deposited to form box-structures with a periodicity of 100.6 ± 5.1 μm and a height of 80 μm (50 stacked filaments; 100 overlap at intersections). We also observed oriented crystalline regions within such ultrafine filaments after annealing at 55 °C. The scaffolds were printed upon NCO-sP(EO-stat-PO)-coated glass slide surfaces and withstood frequent liquid exchanges with negligible scaffold detachment for at least 10 days in vitro. KW - additive manufacturing KW - 3D printing KW - biodegradable polymers KW - microstructures KW - nanostructures Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-254053 VL - 7 IS - 3 ER -