TY - JOUR A1 - Richard, Kyalo A1 - Abdel-Rahman, Elfatih M. A1 - Subramanian, Sevgan A1 - Nyasani, Johnson O. A1 - Thiel, Michael A1 - Jozani, Hosein A1 - Borgemeister, Christian A1 - Landmann, Tobias T1 - Maize cropping systems mapping using RapidEye observations in agro-ecological landscapes in Kenya JF - Sensors N2 - Cropping systems information on explicit scales is an important but rarely available variable in many crops modeling routines and of utmost importance for understanding pests and disease propagation mechanisms in agro-ecological landscapes. In this study, high spatial and temporal resolution RapidEye bio-temporal data were utilized within a novel 2-step hierarchical random forest (RF) classification approach to map areas of mono- and mixed maize cropping systems. A small-scale maize farming site in Machakos County, Kenya was used as a study site. Within the study site, field data was collected during the satellite acquisition period on general land use/land cover (LULC) and the two cropping systems. Firstly, non-cropland areas were masked out from other land use/land cover using the LULC mapping result. Subsequently an optimized RF model was applied to the cropland layer to map the two cropping systems (2nd classification step). An overall accuracy of 93% was attained for the LULC classification, while the class accuracies (PA: producer’s accuracy and UA: user’s accuracy) for the two cropping systems were consistently above 85%. We concluded that explicit mapping of different cropping systems is feasible in complex and highly fragmented agro-ecological landscapes if high resolution and multi-temporal satellite data such as 5 m RapidEye data is employed. Further research is needed on the feasibility of using freely available 10–20 m Sentinel-2 data for wide-area assessment of cropping systems as an important variable in numerous crop productivity models. KW - remote sensing KW - RapidEye KW - bi-temporal KW - cropping systems KW - random forest KW - Kenya Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173285 VL - 17 IS - 11 ER - TY - JOUR A1 - Ullmann, Tobias A1 - Banks, Sarah N. A1 - Schmitt, Andreas A1 - Jagdhuber, Thomas T1 - Scattering characteristics of X-, C- and L-Band PolSAR data examined for the tundra environment of the Tuktoyaktuk Peninsula, Canada JF - Applied Sciences N2 - In this study, polarimetric Synthetic Aperture Radar (PolSAR) data at X-, C- and L-Bands, acquired by the satellites: TerraSAR-X (2011), Radarsat-2 (2011), ALOS (2010) and ALOS-2 (2016), were used to characterize the tundra land cover of a test site located close to the town of Tuktoyaktuk, NWT, Canada. Using available in situ ground data collected in 2010 and 2012, we investigate PolSAR scattering characteristics of common tundra land cover classes at X-, C- and L-Bands. Several decomposition features of quad-, co-, and cross-polarized data were compared, the correlation between them was investigated, and the class separability offered by their different feature spaces was analyzed. Certain PolSAR features at each wavelength were sensitive to the land cover and exhibited distinct scattering characteristics. Use of shorter wavelength imagery (X and C) was beneficial for the characterization of wetland and tundra vegetation, while L-Band data highlighted differences of the bare ground classes better. The Kennaugh Matrix decomposition applied in this study provided a unified framework to store, process, and analyze all data consistently, and the matrix offered a favorable feature space for class separation. Of all elements of the quad-polarized Kennaugh Matrix, the intensity based elements K0, K1, K2, K3 and K4 were found to be most valuable for class discrimination. These elements contributed to better class separation as indicated by an increase of the separability metrics squared Jefferys Matusita Distance and Transformed Divergence. The increase in separability was up to 57% for Radarsat-2 and up to 18% for ALOS-2 data. KW - decomposition KW - arctic KW - PolSAR KW - dual polarimetry KW - quad polarimetry KW - TerraSAR-X KW - Radarsat-2 KW - ALOS KW - ALOS-2 KW - tundra Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-158362 VL - 7 IS - 6 ER - TY - THES A1 - Knöfel, Patrick T1 - Energiebilanzmodellierung zur Ableitung der Evapotranspiration – Beispielregion Khorezm T1 - Optimization of energy balance modelling in order to determine evapotranspiration by developing a physical based soil heat flux approach on the example of Khorezm region in Uzbekistan N2 - Zum Verständnis der komplexen Wechselwirkungen innerhalb des Klimasystems der Erde sind Kenntnisse über den hydrologischen Zyklus und den Energiekreislauf essentiell. Eine besondere Rolle obliegt hierbei der Evapotranspiration (ET), da sie eine wesentliche Teilkomponente beider oben erwähnter Kreisläufe ist. Die exakte Quantifizierung der regionalen, tatsächlichen Evapotranspiration innerhalb der Wasser- und Energiekreisläufe der Erdoberfläche auf unterschiedlichen zeitlichen und räumlichen Skalen ist für hydrologische, klimatologische und agronomische Fragestellungen von großer Bedeutung. Dabei ist eine realistische Abschätzung der regionalen tatsächlichen Evapotranspiration die wichtigste Herausforderung der hydrologischen Modellierung. Besonders die unterschiedlichen räumlichen und zeitlichen Auflösungen von Satelliteninformationen machen die Fernerkundung sowohl für globale als auch regionale hydrologischen Fragestellungen interessant. Zusätzlich zur Notwendigkeit des Prozessverständnisses des Wasserkreislaufs auf globaler Ebene kommt dessen regionale Bedeutung für die Landwirtschaft, insbesondere in Bewässerungssystemen arider Regionen. In ariden Klimazonen übersteigt die Menge der Verdunstung oft bei weitem die Niederschlagsmengen. Aufgrund der geringen Niederschlagsmenge muss in ariden agrarischen Regionen das zum Pflanzenwachstum benötigte Wasser mit Hilfe künstlicher Bewässerung aufgebracht werden. Der jeweilige lokale Bewässerungsbedarf hängt von der Feldfrucht und deren Wachstumsphase, den Klimabedingungen, den Bodeneigenschaften und der Ausdehnung der Wurzelzone ab. Die Evapotranspiration ist als Komponente der regionalen Wasserbilanz eine wichtige Steuerungsgröße und Effizienzindikator für das lokale Bewässerungsmanagement. Die Bewässe-rungslandwirtschaft verbraucht weltweit etwa 70 % der verfügbaren Süßwasservorkom-men. Dies wird als einer der Hauptgründe für die weltweit steigende Wasserknappheit identifiziert. Dabei liegt die Wasserentnahme des landwirtschaftlichen Sektors in den OECD Staaten im Mittel bei etwa 44 %, in den Staaten Mittelasiens bei über 90 %. Bei der Erstellung der vorliegenden Arbeit kam die Methode der residualen Bestimmung der Energiebilanz zum Einsatz. Eines der weltweit am häufigsten eingesetzten und vali-dierten fernerkundlichen Residualmodelle zur ET Ableitung ist das SEBAL-Modell (Surface Energy Balance Algorithm for Land, mit über 40 veröffentlichten Studien. SEBAL eignet sich zur Quantifizierung der Verdunstung großflächiger Gebiete und wurde bisher über-wiegend in der Bewässerungslandwirtschaft eingesetzt. Aus diesen Gründen wurde es für die Bearbeitung der Fragestellungen in dieser Arbeit ausgewählt. SEBAL verwendet physikalische und empirische Beziehungen zur Berechnung der Energiebilanzkomponenten basierend auf Fernerkundungsdaten, bei gleichzeitig minimalem Einsatz bodengestützter Daten. Als Eingangsdaten werden u.a. Informationen über Strahlung, Bodenoberflächentemperatur, NDVI, LAI und Albedo verwendet. Zusätzlich zu SEBAL wurden einige Komponenten der SEBAL Weiterentwicklung METRIC (Mapping Evapotranspiration with Internalized Calibration) verwendet, um die Modellierung der ET vorzunehmen. METRIC überwindet einige Limitierungen des SEBAL Verfahrens und kann beispielsweise auch in stärker reliefierten Regionen angewendet werden. Außerdem ermöglicht die Integration einer gebietsspezifischen Referenz-ET sowie einer Landnutzungsklassifikation eine bessere regionale Anpassung des Residualverfahrens. Unter der Annahme der Bedingungen zum Zeitpunkt der Fernerkundungsaufnahme ergibt sich die Energiebilanz an der Erdoberfläche RN = LvE + H + G. Demnach teilt sich die verfügbare Strahlungsenergie RN in die Komponenten latenter Wärme (LVE), fühlbarer Wärme (H) und Bodenwärme (G) auf. Durch Umstellen der Gleichung kann auf die latente Wärme geschlossen werden. Das wesentliche Ziel der vorliegenden Arbeit ist die Optimierung, Erweiterung und Validierung des ausgewählten SEBAL Verfahrens zur regionalen Modellierung der Energiebilanzkomponenten und der daraus abgeleiteten tatsächlichen Evapotranspiration. Die validierten Modellergebnisse der Gebietsverdunstung der Jahre 2009-2011 sollen anschließend als Grundlage dienen, das Gesamtverständnis der regionalen Prozesse des Wasserkreislaufs zu verbessern. Die Arbeit basiert auf der Datengrundlage von MODIS Daten mit 1 km räumlicher Auflösung. Während die Komponenten verfügbare Strahlungsenergie und fühlbarer Wärmestrom physikalisch basiert ermittelt werden, beruht die Berechnung des Bodenwärmestroms ausschließlich auf empirischen Abschätzungen. Ein großer Nachteil des empirischen Ansatzes ist die Vernachlässigung des zeitlichen Versatzes zwischen Strahlungsbilanz und Bodenwärmestrom in Abhängigkeit der aktuellen Bodenfeuchtesituation. Ein besonderer Schwerpunkt der vorliegenden Arbeit liegt auf der Bewertung und Verbesserung der Modellgüte des Bodenwärmestroms durch Verwendung eines neuen Ansatzes zur Integration von Bodenfeuchteinformationen. Daher wird in der Arbeit ein physikalischer Ansatz entwickelt der auf dem Ansatz der periodischen Temperaturveränderung basiert. Hierbei wurde neben dem ENVISAT ASAR SSM Produkt der TU Wien das operationelle Oberflächenbodenfeuchteprodukt ASCAT SSM als Fernerkundungseingangsdaten ausgewählt. Die mit SEBAL modellierten Energiebilanzkomponenten werden durch eine intensive Validierung mit bodengestützten Messungen bewertet, die Messungen stammen von Bodensensoren und Daten einer Eddy-Kovarianz-Station aus den Jahren 2009 bis 2011. Die Region Khorezm gilt als charakteristisch für die wasserbezogene Problematik der Bewässerungslandwirtschaft Mittelasiens und wurde als Untersuchungsgebiet für diese Arbeit ausgewählt. Die wesentlichen Probleme dieser Region entstehen durch die nach wie vor nicht nachhaltige Land- und Wassernutzung, das marode Bewässerungsnetz mit einer Verlustrate von bis zu 40 % und der Bodenversalzung aufgrund hoher Grundwasserspiegel. Im Untersuchungsgebiet wurden in den Jahren 2010 und 2011 umfangreiche Feldarbeiten zur Erhebung lokaler bodengestützter Informationen durchgeführt. Bei der Evaluierung der modellierten Einzelkomponenten ergab sich für die Strahlungsbi-lanz eine hohe Modellgüte (R² > 0,9; rRMSE < 0,2 und NSE > 0,5). Diese Komponente bildet die Grundlage bei der Bezifferung der für die Prozesse an der Erdoberfläche zur Verfügung stehenden Energie. Für die fühlbaren Wärmeströme wurden ebenfalls gute Ergebnisse erzielt, mit NSE von 0,31 und rRMSE von ca. 0,21. Für die residual bestimmte Größe der latenten Wärmeströmung konnte eine insgesamt gute Modellgüte festgestellt werden (R² > 0,6; rRMSE < 0,2 und NSE > 0,5). Dementsprechend gut wurde die tägliche Evapotranspiration modelliert. Hier ergab sich, nach der Interpolation täglicher Werte, eine insgesamt ausreichend gute Modellgüte (R² > 0,5; rRMSE < 0,2 und NSE > 0,4). Dies bestätigt die Ergebnisse vieler Energiebilanzstudien, die lediglich den für die Ableitung der Evapotranspiration maßgebenden Wärmestrom untersuchten. Die Modellergebnisse für den Bodenwärmestrom konnten durch die Entwicklung und Verwendung des neu entwickelten physikalischen Ansatzes von NSE < 0 und rRMSE von ca. 0,57 auf NSE von 0,19 und rRMSE von 0,35 verbessert werden. Dies führt zu einer insgesamt positiven Einschätzung des Verbesserungspotenzials des neu entwickelten Bodenwärmestromansatzes bei der Berechnung der Energiebilanz mit Hilfe von Fernerkundung. N2 - The understanding of the hydrological and the energy cycles are essential in order to describe the complex interactions within the climate system of the earth. Being recognized as an important component of both, the water and the energy cycle, reliable estimation of actual evapotranspiration and its spatial distribution is one outstanding challenge in this context. Detailed knowledge of land surface fluxes, especially latent and sensible heat components, is important for monitoring the climate and land surface, and for agriculture applications such as irrigation scheduling and water management. The use of remote sensing data to determine actual evapotranspiration (ET) is particularly suitable to provide area based indicators for the evaluation of the efficiency and productivity of irrigation systems as well as sustainability studies. Accurate estimation of evapotranspiration plays an important role in quantification of the water balance at watershed, basin, and regional scale for better planning and managing water resources. For instance, in irrigation systems of arid regions, artificial locations of evapotranspiration have been created. An in-depth process understanding is of paramount importance, as irrigated agriculture consumes about 70 % of the available freshwater resources worldwide, with a significant but unsatisfyingly quantified impact on the water cycle, especially on regional scale. Moreover, an exact quantification of ET inside these artificial ecosystems enables assessments of crop water consumptions and hence about water use efficiency. The withdrawal of water for agricultural use in the countries of Central Asia is more than 90 %. For this thesis the residual methods of energy budget are of interest. One of the most common models dealing with energy budget residual is the Surface Energy Balance Algorithm for Land (SEBAL). SEBAL uses physical and empirical relationships to calculate the energy partitioning with minimum of ground data and atmospheric variables are estimated from remote sensing data. The determination of wet and dry surfaces is necessary to extract threshold values. SEBAL requires remote sensing input data like radiation, surface temperature, NDVI, and albedo. For this thesis an algorithm was developed based on SEBAL, its adaptations METRIC (Mapping Evapotranspiration with Internalized Calibration) and some regional adjustments. METRIC introduces the leaf area index (LAI) and land use classification data to determine the dry and hot surfaces as well as the input of additional meteorological data in order to improve the results of the model. Estimation of latent heat flux (LvE, corresponding to evapotranspiration) with SEBAL is based on assessing the energy balance through several surface properties such as albedo, LAI, NDVI, LST etc. Considering instantaneous condition, the energy balance is written as RN = LvE + H + G. Net radiation energy (RN) is available as the sum of the atmospheric convective fluxes sensible heat flux (H), latent heat flux (LvE) and the soil heat flux (G). The main objective of this thesis is to optimize, improve, and evaluate the existing remote sensing based algorithms for the estimation of actual evapotranspiration. For this purpose the seasonal actual ET was calculated using a partly modified SEBAL. SEBAL was implemented based on MODIS time series to solve the energy balance equation. The applied model has proven practicable for this area and is accepted to fulfil the scientific demands. The SEBAL algorithm is tested and set up for the use of 1km MODIS products. Land surface temperature (LST), emissivity, albedo, Normalized Differenced Vegetation Index (NDVI), and leaf area index (LAI) were combined for modelling the actual ET. Land use classification results were aggregated to 1km MODIS scale. Furthermore, the surface soil moisture products ASCAT SSM and ASAR SSM will be used as input data for the model. In addition to remote sensing data meteorological and ground truth data are used in this study. Meteorological data are wind speed, air temperature, relative humidity, and net radiation. The data is required at time of satellite overpass (about 12 p.m.). RN depends on incoming shortwave radiation, incoming and outgoing longwave radiant fluxes, albedo, emissivity and surface temperature. H is mostly calculated using the aerodynamic resistance between the surface and the reference height in the lower atmosphere (commonly 2 m) above surface. G is usually estimated using an empirical equation. This thesis introduces a modified equation to estimate G using an adjusted form of the thermal conduction equation. This method uses microwave soil moisture products (ASAR-SSM and ASCAT-SSM) as additional input information. The SEBAL modelled energy balance components were intensively validated by field measurements with an eddy covariance system and soil sensors in 2009, 2010, and 2011. The thesis is primarily concerned with the irrigation farming of cotton ecosystems in Central Asia, in particular with the situation within Khorezm Oblast in Uzbekistan. Regional problems of Khorezm are high groundwater levels, soil salinity, and non-sustainable use of land and water. Amongst others, the determination of ground truth data driven by the above mentioned objectives are part of two extensive field campaigns in 2010 and 2011. The validation of the modelled energy balance components leads to a good quality assessment. The model shows very good performance for RN with average model efficiency (NSE) of 0,68 and small relative errors (rRMSE) of about 0,10. For turbulent heat fluxes good results can be achieved with NSE of 0,31 for H and 0,55 for LE, the rRMSE are about 0,21 (H) and 0,18 (LvE). Soil heat flux estimation could be improved using the physically based approach. While the empirical equation leads to negative NSE and rRMSE of about 0,57, the improved approach shows rRMSE of 0,35 and NSE of 0,19. Thus, the improved G estimation can be registered as a valuable contribution for the remote sensing based estimation of energy balance components. N2 - Die Bewässerungslandwirtschaft verbraucht weltweit etwa 70 % der verfügbaren Süßwasservorkommen. Dabei liegt die Wasserentnahme des landwirtschaftlichen Sektors in den Staaten Mittelasiens bei über 90 %. Wichtige Voraussetzungen für die Landwirtschaft sind der Produktionsfaktor Boden und das Klima. Der Wassergehalt und die Temperatur des Bodens bestimmen im Wesentlichen den Anteil der verfügbaren solaren Strahlungsenergie, der in den Boden geleitet wird. Existierende Fernerkundungsansätze verwenden zur Ermittlung des Bodenwärmestroms überwiegend empirische Gleichungen, da zuverlässige flächenhafte Informationen über die Bodenfeuchte bisher aufgrund räumlich unzureichender messtechnischer Bedingungen nicht ermittelt werden können. In der vorliegenden Arbeit wird ein neu entwickelter, physikalisch-basierter Ansatz vorgestellt, der erstmals räumlich hochaufgelöste Bodenfeuchteinformationen aus Radardatensätzen zur Berechnung des Bodenwärmestroms verwendet. Dieser Ansatz wird zur Lösung der Energiebilanz an der Erdoberfläche verwendet, um indirekt auf die tatsächlichen Evapotranspiration zu schließen. Denn eine realistische Quantifizierung der regionalen, tatsächlichen Evapotranspiration als Komponente der regionalen Wasserbilanz ist eine wichtige Steuerungsgröße und ein Effizienzindikator für das lokale Bewässerungsmanagement. T3 - Würzburger Geographische Arbeiten - 120 KW - Evapotranspiration KW - Energiebilanz KW - Mikrometeorologie KW - Bodenfeuchte KW - Fernerkundung KW - Eddy-Kovarianz Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-135669 SN - 978-3-95826-042-9 (Print) SN - 978-3-95826-043-6 (Online) SN - 0510-9833 SN - 2194-3656 N1 - Eingereicht mit dem Titel: Optimierung der Energiebilanzmodellierung zur Ableitung der Evapotranspiration durch Entwicklung eines physikalischen Bodenwärmestromansatzes am Beispiel der Region Khorezm (Usbekistan). N1 - Parallel erschienen als Druckausgabe in Würzburg University Press, 978-3-95826-042-9, 34,90 EUR. PB - Würzburg University Press CY - Würzburg ET - 1. Auflage ER - TY - JOUR A1 - Lausch, Angela A1 - Borg, Erik A1 - Bumberger, Jan A1 - Dietrich, Peter A1 - Heurich, Marco A1 - Huth, Andreas A1 - Jung, András A1 - Klenke, Reinhard A1 - Knapp, Sonja A1 - Mollenhauer, Hannes A1 - Paasche, Hendrik A1 - Paulheim, Heiko A1 - Pause, Marion A1 - Schweitzer, Christian A1 - Schmulius, Christiane A1 - Settele, Josef A1 - Skidmore, Andrew K. A1 - Wegmann, Martin A1 - Zacharias, Steffen A1 - Kirsten, Toralf A1 - Schaepman, Michael E. T1 - Understanding forest health with remote sensing, part III: requirements for a scalable multi-source forest health monitoring network based on data science approaches JF - Remote Sensing N2 - Forest ecosystems fulfill a whole host of ecosystem functions that are essential for life on our planet. However, an unprecedented level of anthropogenic influences is reducing the resilience and stability of our forest ecosystems as well as their ecosystem functions. The relationships between drivers, stress, and ecosystem functions in forest ecosystems are complex, multi-faceted, and often non-linear, and yet forest managers, decision makers, and politicians need to be able to make rapid decisions that are data-driven and based on short and long-term monitoring information, complex modeling, and analysis approaches. A huge number of long-standing and standardized forest health inventory approaches already exist, and are increasingly integrating remote-sensing based monitoring approaches. Unfortunately, these approaches in monitoring, data storage, analysis, prognosis, and assessment still do not satisfy the future requirements of information and digital knowledge processing of the 21st century. Therefore, this paper discusses and presents in detail five sets of requirements, including their relevance, necessity, and the possible solutions that would be necessary for establishing a feasible multi-source forest health monitoring network for the 21st century. Namely, these requirements are: (1) understanding the effects of multiple stressors on forest health; (2) using remote sensing (RS) approaches to monitor forest health; (3) coupling different monitoring approaches; (4) using data science as a bridge between complex and multidimensional big forest health (FH) data; and (5) a future multi-source forest health monitoring network. It became apparent that no existing monitoring approach, technique, model, or platform is sufficient on its own to monitor, model, forecast, or assess forest health and its resilience. In order to advance the development of a multi-source forest health monitoring network, we argue that in order to gain a better understanding of forest health in our complex world, it would be conducive to implement the concepts of data science with the components: (i) digitalization; (ii) standardization with metadata management after the FAIR (Findability, Accessibility, Interoperability, and Reusability) principles; (iii) Semantic Web; (iv) proof, trust, and uncertainties; (v) tools for data science analysis; and (vi) easy tools for scientists, data managers, and stakeholders for decision-making support. KW - forest health KW - in situ forest monitoring KW - remote sensing KW - data science KW - digitalization KW - big data KW - semantic web KW - linked open data KW - FAIR KW - multi-source forest health monitoring network Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197691 SN - 2072-4292 VL - 10 IS - 7 ER - TY - JOUR A1 - Nyamekye, Clement A1 - Thiel, Michael A1 - Schönbrodt-Stitt, Sarah A1 - Zoungrana, Benewinde J.-B. A1 - Amekudzi, Leonard K. T1 - Soil and water conservation in Burkina Faso, West Africa JF - Sustainability N2 - Inadequate land management and agricultural activities have largely resulted in land degradation in Burkina Faso. The nationwide governmental and institutional driven implementation and adoption of soil and water conservation measures (SWCM) since the early 1960s, however, is expected to successively slow down the degradation process and to increase the agricultural output. Even though relevant measures have been taken, only a few studies have been conducted to quantify their effect, for instance, on soil erosion and environmental restoration. In addition, a comprehensive summary of initiatives, implementation strategies, and eventually region-specific requirements for adopting different SWCM is missing. The present study therefore aims to review the different SWCM in Burkina Faso and implementation programs, as well as to provide information on their effects on environmental restoration and agricultural productivity. This was achieved by considering over 143 studies focusing on Burkina Faso’s experience and research progress in areas of SWCM and soil erosion. SWCM in Burkina Faso have largely resulted in an increase in agricultural productivity and improvement in food security. Finally, this study aims at supporting the country’s informed decision-making for extending already existing SWCM and for deriving further implementation strategies. KW - soil and water conservation KW - environmental degradation KW - agricultural productivity KW - food security KW - soil erosion KW - Burkina Faso Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197653 SN - 2071-1050 VL - 10 IS - 9 ER - TY - JOUR A1 - Reichmuth, Anne A1 - Henning, Lea A1 - Pinnel, Nicole A1 - Bachmann, Martin A1 - Rogge, Derek T1 - Early detection of vitality changes of multi-temporal Norway spruce laboratory needle measurements—the ring-barking experiment JF - Remote Sensing N2 - The focus of this analysis is on the early detection of forest health changes, specifically that of Norway spruce (Picea abies L. Karst.). In this analysis, we planned to examine the time (degree of early detection), spectral wavelengths and appropriate method for detecting vitality changes. To accomplish this, a ring-barking experiment with seven subsequent laboratory needle measurements was carried out in 2013 and 2014 in an area in southeastern Germany near Altötting. The experiment was also accompanied by visual crown condition assessment. In total, 140 spruce trees in groups of five were ring-barked with the same number of control trees in groups of five that were selected as reference trees in order to compare their development. The laboratory measurements were analysed regarding the separability of ring-barked and control samples using spectral reflectance, vegetation indices and derivative analysis. Subsequently, a random forest classifier for determining important spectral wavelength regions was applied. Results from the methods are consistent and showed a high importance of the visible (VIS) spectral region, very low importance of the near-infrared (NIR) and minor importance of the shortwave infrared (SWIR) spectral region. Using spectral reflectance data as well as indices, the earliest separation time was found to be 292 days after ring-barking. The derivative analysis showed that a significant separation was observed 152 days after ring-barking for six spectral features spread through VIS and SWIR. A significant separation was detected using a random forest classifier 292 days after ring-barking with 58% separability. The visual crown condition assessment was analysed regarding obvious changes of vitality and the first indication was observed 302 days after ring-barking as bark beetle infestation and yellowing of foliage in the ring-barked trees only. This experiment shows that an early detection, compared with visual crown assessment, is possible using the proposed methods for this specific data set. This study will contribute to ongoing research for early detection of vitality changes that will support foresters and decision makers. KW - laboratory measurements KW - derivatives KW - spectroscopy KW - forest health KW - ring-barking KW - random forest KW - index analysis Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159253 VL - 10 IS - 1 ER - TY - JOUR A1 - Zielewska-Büttner, Katarzyna A1 - Heurich, Marco A1 - Müller, Jörg A1 - Braunisch, Veronika T1 - Remotely Sensed Single Tree Data Enable the Determination of Habitat Thresholds for the Three-Toed Woodpecker (Picoides tridactylus) JF - Remote Sensing N2 - Forest biodiversity conservation requires precise, area-wide information on the abundance and distribution of key habitat structures at multiple spatial scales. We combined airborne laser scanning (ALS) data with color-infrared (CIR) aerial imagery for identifying individual tree characteristics and quantifying multi-scale habitat requirements using the example of the three-toed woodpecker (Picoides tridactylus) (TTW) in the Bavarian Forest National Park (Germany). This bird, a keystone species of boreal and mountainous forests, is highly reliant on bark beetles dwelling in dead or dying trees. While previous studies showed a positive relationship between the TTW presence and the amount of deadwood as a limiting resource, we hypothesized a unimodal response with a negative effect of very high deadwood amounts and tested for effects of substrate quality. Based on 104 woodpecker presence or absence locations, habitat selection was modelled at four spatial scales reflecting different woodpecker home range sizes. The abundance of standing dead trees was the most important predictor, with an increase in the probability of TTW occurrence up to a threshold of 44–50 dead trees per hectare, followed by a decrease in the probability of occurrence. A positive relationship with the deadwood crown size indicated the importance of fresh deadwood. Remote sensing data allowed both an area-wide prediction of species occurrence and the derivation of ecological threshold values for deadwood quality and quantity for more informed conservation management. KW - deadwood KW - standing deadwood KW - dead tree KW - snags KW - three-toed woodpecker (Picoides tridactylus) KW - habitat suitability model (HSM) KW - habitat requirements KW - airborne laser scanning (ALS) KW - CIR aerial imagery Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197565 SN - 2072-4292 VL - 10 IS - 12 ER - TY - JOUR A1 - Wei, Chunzhu A1 - Blaschke, Thomas T1 - Pixel-wise vs. object-based impervious surface analysis from remote sensing: correlations with land surface temperature and population density JF - Urban Science N2 - Impervious surface areas (ISA) are heavily influenced by urban structure and related structural features. We examined the effects of object-based impervious surface spatial pattern analysis on land surface temperature and population density in Guangzhou, China, in comparison to classic per-pixel analyses. An object-based support vector machine (SVM) and a linear spectral mixture analysis (LSMA) were integrated to estimate ISA fraction using images from the Chinese HJ-1B satellite for 2009 to 2011. The results revealed that the integrated object-based SVM-LSMA algorithm outperformed the traditional pixel-wise LSMA algorithm in classifying ISA fraction. More specifically, the object-based ISA spatial patterns extracted were more suitable than pixel-wise patterns for urban heat island (UHI) studies, in which the UHI areas (landscape surface temperature >37 °C) generally feature high ISA fraction values (ISA fraction >50%). In addition, the object-based spatial patterns enable us to quantify the relationship of ISA with population density (correlation coefficient >0.2 in general), with global human settlement density (correlation coefficient >0.2), and with night-time light map (correlation coefficient >0.4), and, whereas pixel-wise ISA did not yield significant correlations. These results indicate that object-based spatial patterns have a high potential for UHI detection and urbanization monitoring. Planning measures that aim to reduce the urbanization impacts and UHI intensities can be better supported. KW - impervious surface areas KW - object-based image analysis KW - land surface temperature KW - population density Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197829 SN - 2413-8851 VL - 2 IS - 1 ER - TY - JOUR A1 - Mayr, Stefan A1 - Kuenzer, Claudia A1 - Gessner, Ursula A1 - Klein, Igor A1 - Rutzinger, Martin T1 - Validation of earth observation time-series: a review for large-area and temporally dense land surface products JF - Remote Sensing N2 - Large-area remote sensing time-series offer unique features for the extensive investigation of our environment. Since various error sources in the acquisition chain of datasets exist, only properly validated results can be of value for research and downstream decision processes. This review presents an overview of validation approaches concerning temporally dense time-series of land surface geo-information products that cover the continental to global scale. Categorization according to utilized validation data revealed that product intercomparisons and comparison to reference data are the conventional validation methods. The reviewed studies are mainly based on optical sensors and orientated towards global coverage, with vegetation-related variables as the focus. Trends indicate an increase in remote sensing-based studies that feature long-term datasets of land surface variables. The hereby corresponding validation efforts show only minor methodological diversification in the past two decades. To sustain comprehensive and standardized validation efforts, the provision of spatiotemporally dense validation data in order to estimate actual differences between measurement and the true state has to be maintained. The promotion of novel approaches can, on the other hand, prove beneficial for various downstream applications, although typically only theoretical uncertainties are provided. KW - accuracy KW - error estimation KW - global KW - intercomparison KW - remote sensing KW - uncertainty Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193202 SN - 2072-4292 VL - 11 IS - 22 ER - TY - JOUR A1 - Abdullahi, Sahra A1 - Wessel, Birgit A1 - Huber, Martin A1 - Wendleder, Anna A1 - Roth, Achim A1 - Kuenzer, Claudia T1 - Estimating penetration-related X-band InSAR elevation bias: a study over the Greenland ice sheet JF - Remote Sensing N2 - Accelerating melt on the Greenland ice sheet leads to dramatic changes at a global scale. Especially in the last decades, not only the monitoring, but also the quantification of these changes has gained considerably in importance. In this context, Interferometric Synthetic Aperture Radar (InSAR) systems complement existing data sources by their capability to acquire 3D information at high spatial resolution over large areas independent of weather conditions and illumination. However, penetration of the SAR signals into the snow and ice surface leads to a bias in measured height, which has to be corrected to obtain accurate elevation data. Therefore, this study purposes an easy transferable pixel-based approach for X-band penetration-related elevation bias estimation based on single-pass interferometric coherence and backscatter intensity which was performed at two test sites on the Northern Greenland ice sheet. In particular, the penetration bias was estimated using a multiple linear regression model based on TanDEM-X InSAR data and IceBridge laser-altimeter measurements to correct TanDEM-X Digital Elevation Model (DEM) scenes. Validation efforts yielded good agreement between observations and estimations with a coefficient of determination of R\(^2\) = 68% and an RMSE of 0.68 m. Furthermore, the study demonstrates the benefits of X-band penetration bias estimation within the application context of ice sheet elevation change detection. KW - InSAR height KW - penetration bias KW - cryosphere KW - TanDEM-X KW - Greenland ice sheet KW - DEM Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193902 SN - 2072-4292 VL - 11 IS - 24 ER -