TY - THES A1 - Zottnick, Sven Holger T1 - Lumineszierende Lanthanid-Koordinationsverbindungen auf Basis von Cyano- und Spiroborat Salzen und ionischen Flüssigkeiten T1 - Luminescent lanthanide coordination compounds based on cyano- and spiroborate salts and ionic liquids N2 - Im Rahmen dieser Arbeit konnten, ausgehend von Borat-haltigen Salzen und ionischen Flüssigkeiten (ILs) sowie Lanthanid-haltigen Precursoren, 30 neue Komplexe und Koordinationspolymere dargestellt werden. Dazu wurden vielfältige Synthesestrategien verfolgt und angewendet, unter anderem Salzmetathesen in Lösung, Solvothermalsynthesen und Ionothermalsynthesen. Ein Hauptaugenmerk bei der Synthese der Zielverbindungen lag auf deren Eigenschaften, wobei insbesondere die Photolumineszenzeigenschaften der erhaltenen Koordinationsverbindungen untersucht wurden. Als Borat-haltige Liganden wurden sowohl Cyanoborate als auch Oxoborate hinsichtlich ihrer Eignung zum Aufbau neuer Koordinationspolymere untersucht. Als Cyanoborat-haltige Edukte wurden dabei Säuren und ionische Flüssigkeiten mit Dicyano-, Tricyano- und Tetracyanoborat- Anionen eingesetzt, die durch die unterschiedliche Zahl an Cyanogruppen zu vielfältigen Koordinationsverbindungen führen können. Mittels Ionothermalsynthese konnten die Verbindungen 1∞[Ln(NO3)2{B(CN)4}(H2O)4] (Ln = La, Eu) sowie [EMIm]1∞[LaNO3{B(CN)4}3(H2O)3] dargestellt werden, wobei es zu einer Transformation der ionischen Flüssigkeit [EMIm][B(CN)4] in ein Koordinationspolymer kommt, in dem sowohl Kation als auch Anion der IL beteiligt sind. Dabei ist es bemerkenswerterweise durch die Reaktionstemperatur möglich zu steuern, welches Produkt sich letztlich bildet. Ebenfalls durch Ionothermalsynthese gelang die Synthese von Einkristallen der Verbindung 3∞[La{C2F5B(CN)3}3], durch deren Kenntnis die Verbindungen 3∞[Ln{C2F5B(CN)3}3](Ln = Eu, Ho) als isotype Strukturen identifiziert und hinsichtlich ihrer Lumineszenzeigenschaften charakterisiert werden konnten. Durch Umsetzungen der Lanthanidchloride mit der Säure H[BH2(CN)2] in Solvothermalsynthesen in Pyridin (py) konnten eindimensionale Koordinationspolymere [H(py)2]1∞[LnCl2{BH2(CN)2}2(py)2]·0.5py (Ln = Ce, Pr) erhalten werden. Unter vergleichbaren Synthesebedingungen aber im Lösungsmittel MeCN beobachtet man hingegen die Bildung von Raumnetzen der Zusammensetzung 3∞[Ln2{BH2(CN)2}9]·[Ln(CH3CN)9] (Ln = Ce, Eu, Tb). Die dreidimensionalen Koordinationspolymere 3∞[Ln{BH(CN)3}3] (Ln = Eu, Tb) wurden ebenfalls in MeCN synthetisiert, allerdings ausgehend von der Säure [H3O][BH(CN)3]. Die erwähnten Verbindungen zeigen für die spektroskopisch relevanten Vertreter charakteristische Lumineszenz auf Basis von 5d-4f- respektive 4f-4f-Übergängen, die überwiegend auf der direkten Anregung der jeweiligen Lanthanidionen beruht. Mit dem Bis-salicylatoborat-Anion (= BSB−) gelang ausgehend von Na[BSB] und LnCl3 unter solvothermalen Bedingungen in Pyridin die Synthese der eindimensionalen, strangartigen Koordinationspolymere 1∞[Ln(BSB)3(py)2] (Ln = Y, La – Nd, Sm) und der zweidimensionalen, schichtartigen Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Sm, Eu, Tb – Er). Einblicke über den Mechanismus der Bildung der genannten Verbindungen konnten durch den Komplex [ErCl2(py)4BSB] gewonnen werden, der eine sukzessive Substitution der Chlorid-Liganden nachweist. Die Verbindungen mit dem [BSB]−-Anion zeigen Photolumineszenz, die auf unterschiedliche Prozesse zurückgeführt werden kann. So weist 1∞[Y(BSB)3(py)2] Fluoreszenz auf, die von den [BSB]−-Anionen herrührt, während 1∞[Ln(BSB)3(py)2] (Ln = Ce, Nd, Sm) sowie 2∞[Ln(BSB)3(py)] (Ln = Sm, Tb, Dy) Lumineszenz auf Basis von 5d-4f- und 4f-4f-Übergängen zeigen, die durch einen Antenneneffekt der koordinierenden [BSB]−-Anionen vergleichsweise intensiv beobachtet werden können. Eine Sonderstellung nehmen hier die Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Eu, Ho) ein. Während mit Eu3+ überwiegend direkte Anregung festgestellt werden kann, treten für Ho3+ Reabsorptionsprozesse auf. Durch Kombination unterschiedlicher Gehalte an Eu3+- bzw. Tb3+-Ionen in den eindimensionalen Koordinationspolymeren 1∞[EuxTb1−x(BSB)3(py)2] (x = 0.75, 0.50, 0.25) können zudem Mischfarben der Lumineszenz erzeugt werden. Mit dem Komplex [B2O(C2O4)2(dmf)2] (dmf = Dimethylformamid) und dem Koordinationspolymer 1∞[Tb{o-C6H4(CO2)2}(H2O)6][PHB]2 (PHB− = Phthalatoborat) konnte zudem die Sonderstellung des [BSB]−-Anions deutlich gemacht werden, da es als einziges untersuchtes Spiroborat-Anion vollständig in Zielverbindungen eingebaut werden konnte, während vergleichbare Spiroborat-Anionen wie das [PHB]−-Anion in Gegenwart Lewis-acider Verbindungen hingegen die Abspaltung funktioneller Gruppen zeigten. Insgesamt konnten in dieser Arbeit somit zahlreiche neue, lumineszierende Koordinationspolymere mit Cyano- und Oxoboraten erfolgreich dargestellt werden. N2 - Within the scope of this thesis 30 new complexes and coordination polymers could be synthesized, starting from borate-containing salts and ionic liquids (ILs) as well as lanthanide compounds. Therefore, manifold synthesis strategies were applied, including salt metatheses, solvothermal syntheses and ionothermal syntheses. The main focus within the synthesis of desired products was set on the properties of the compounds, particularly on their photoluminescence behavior. Both cyanoborates and oxoborates were investigated regarding their potential in constructing new coordination polymers. Acids and ionic liquids with dicyano-, tricyano- and tetracyanoborate anions were used, leading to diverse coordination compounds due to their varying number of cyano groups. By applying ionothermal methods, the compounds 1∞[Ln(NO3)2{B(CN)4}(H2O)4] (Ln = La, Eu) and [EMIm]1∞[LaNO3{B(CN)4}3(H2O)3] could be synthesized from the ionic liquid [EMIm][B(CN)4], showing a transformation of the ionic liquid into a coordination polymer incorporating both cation and anion of the IL. Remarkably, it is possible to control, which of the products is formed by changing the reaction temperature. Single crystals of the compound 3∞[La{C2F5B(CN)3}3] could also be synthesized by ionothermal methods. With the knowledge on the crystal structure, it was possible to identify the compounds 3∞[Ln{C2F5B(CN)3}3] (Ln = Eu, Ho) as isotypic structures, thereby allowing further investigations on their properties, including their luminescence features. By reacting lanthanide chlorides with the acid H[BH2(CN)2] in pyridine (py), one-dimensional coordination polymers [H(py)2]1∞[LnCl2{BH2(CN)2}2(py)2]·0.5py (Ln = Ce, Pr) could be obtained. Under similar solvothermal conditions, but in MeCN as solvent, the formation of networks of the constitution 3∞[Ln2{BH2(CN)2}9]·[Ln(CH3CN)9] (Ln = Ce, Eu, Tb) is observed instead. The three-dimensional coordination polymers 3∞[Ln{BH(CN)3}3] (Ln = Eu, Tb) were also synthesized in MeCN, however starting from the acid [H3O][BH(CN)3]. The compounds described show characteristic luminescence for spectroscopically relevant ions, based on 5d- 4f- and 4f-4f-transitions, respectively. Thereby, the observed luminescence is mainly based on a direct excitation of the respective lanthanide ions. With the bis-salicylatoborate-anion (= BSB−), it was possible to synthesize one-dimensional, strand-like coordination polymers 1∞[Ln(BSB)3(py)2] (Ln = Y, La – Nd, Sm) as well as twodimensional, sheet-like structures 2∞[Ln(BSB)3(py)] (Ln = Sm, Eu, Tb – Er), starting from Na[BSB] and LnCl3 under solvothermal conditions in pyridine. The molecular complex [ErCl2(py)4BSB] allowed further insights into the formation of the described compounds, as it proves a gradual substitution of chloride ligands by [BSB]−-anions. The compounds with the [BSB]−-anion show photoluminescence features ascribed to different processes. 1∞[Y(BSB)3(py)2] shows fluorescence originating from the [BSB]−-anion, while 1∞[Ln(BSB)3(py)2] (Ln = Ce, Nd, Sm) and 2∞[Ln(BSB)3(py)] (Ln = Sm, Tb, Dy) show luminescence based on 5d-4f- and 4f-4f-transitions. These are quite intense, as an antenna effect of coordinating [BSB]−-anions can be observed. The compounds 2∞[Ln(BSB)3(py)] (Ln = Eu, Ho) prove as exceptions, as direct excitation is mainly observed for Eu3+, while Ho3+ shows reabsorption processes. By mixing different contents of Eu3+ and Tb3+ in the one-dimensional coordination polymers 1∞[EuxTb1−x(BSB)3(py)2] (x = 0.75, 0.50, 0.25), it is possible to create mixed luminescence colors. With the complex [B2O(C2O4)2(dmf)2] (dmf = dimethylformamide) and the coordination polymer 1∞[Tb{o-C6H4(CO2)2}(H2O)6][PHB]2 (PHB− = phthalatoborate) the exceptional position of the [BSB]−-anions within the class of spiroborates could be revealed, as it proved as only spiroborate anion within this work, that could be fully incorporated in the desired products. This is benficial to a great extent, as similar spiroborate anions like the [PHB]−-anion tend to loose functional groups in the presence of Lewis-acid compounds. Altogether, it was possible to successfully synthesize numerous luminescent coordination polymers with cyano- and oxoborates in this work. KW - Photolumineszenz KW - Lanthanoide KW - Borate KW - Spiroborate KW - Cyanoborate KW - Koordinationsverbindungen KW - Koordinationspolymere KW - MOFs Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-157945 ER - TY - INPR A1 - Stoy, Andreas A1 - Böhnke, Julian A1 - Jiménez-Halla, J. Oscar C. A1 - Dewhurst, Rian D. A1 - Thiess, Torsten A1 - Braunschweig, Holger T1 - CO\(_2\) Binding and Splitting by Boron–Boron Multiple Bonds T2 - Angewandte Chemie, International Edition N2 - CO\(_2\) is found to undergo room-temperature, ambient- pressure reactions with two species containing boron-boron multiple bonds, leading to incorporation of either one or two CO\(_2\) molecules. In one case, a thermally-unstable intermediate was structurally characterized, indicating the operation of an initial 2+2 cycloaddition mechanism in the reaction. KW - carbon dioxide KW - CO2 fixation KW - diborenes KW - diborynes KW - boron Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-164265 N1 - This is the pre-peer reviewed version of the following article: A. Stoy, J. Böhnke, J. O. C. Jiménez‐Halla, R. D. Dewhurst, T. Thiess, H. Braunschweig, Angew. Chem. Int.Ed. 2018, 57,5947 –5951, which has been published in final form at DOI: 10.1002/anie.201802117. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. ER - TY - INPR A1 - Stennett, Tom A1 - Mattock, James A1 - Vollert, Ivonne A1 - Vargas, Alfredo A1 - Braunschweig, Holger T1 - Unsymmetrical, Cyclic Diborenes and Thermal Rearrangement to a Borylborylene T2 - Angewandte Chemie, International Edition N2 - Cyclic diboranes(4) based on a chelating monoanionic, benzylphosphine linker were prepared by boron-silicon exchange between arylsilanes and B\(_2\)Br\(_4\). Coordination of Lewis bases to the remaining sp\(^2\) boron atom yielded unsymmetrical sp\(^3\)-sp\(^3\) diboranes, which were reduced with KC\(_8\) to their corresponding trans-diborenes. These compounds were studied by a combination of spectroscopic methods, X-ray diffraction and DFT calculations. PMe\(_3\)-stabilized diborene 6 was found to undergo thermal rearrangement to gem- diborene 8. DFT calculations on 8 reveal a polar boron-boron bond, and indicate that the compound is best described as a borylborylene. KW - boron KW - borylene KW - multiple bonds KW - rearrangement KW - DFT calculations Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-160258 N1 - This is the pre-peer reviewed version of the following article: T. E. Stennett, J. D. Mattock, I. Vollert, A. Vargas, H. Braunschweig, Angew. Chem. Int. Ed. 2018, 57, 4098., which has been published in final form at DOI: 10.1002/anie.201800671. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. VL - 57 ER - TY - INPR A1 - Stennett, Tom A1 - Mattock, James A1 - Pentecost, Leanne A1 - Vargas, Alfredo A1 - Braunschweig, Holger T1 - Chelated Diborenes and their Inverse-Electron-Demand Diels- Alder Reactions with Dienes T2 - Angewandte Chemie, International Edition N2 - A doubly base-stabilized diborane based on a benzylphosphine linker was prepared by a salt elimination reaction between 2-LiC\(_6\)H\(_4\)CH\(_2\)PCy\(_2\).Et\(_2\)O and B\(_2\)Br\(_4\). This compound was reduced with KC8 to its corresponding diborene, with the benzylphosphine forming a five-membered chelate. The diborene reacts with butadiene, 2-trimethylsiloxy-1,3-butadiene and isoprene to form 4,5-diboracyclohexenes, which interconvert between their 1,1- (geminal) and 1,2- (vicinal) chelated isomers. The 1,1-chelated diborene undergoes a halide-catalysed isomerisation into its thermodynamically favoured 1,2-isomer, which undergoes Diels-Alder reactions more slowly than the kinetic product. KW - boron KW - cycloaddition KW - DFT calculations KW - chelates KW - low-valent compounds Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-178268 N1 - This is the pre-peer reviewed version of the following article: T. E. Stennett, J. D. Mattock, L. Pentecost, A. Vargas, H. Braunschweig, Angew. Chem. Int. Ed. 2018, 57, 15276., which has been published in final form at https://doi.org/10.1002/anie.201809217. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. ER - TY - INPR A1 - Stennett, Tom A1 - Bertermann, Rüdiger A1 - Braunschweig, Holger T1 - Construction of Linear and Branched Tetraboranes via 1,1- and 1,2-Diboration of Diborenes T2 - Angewandte Chemie, International Edition N2 - Sterically unencumbered diborenes based on a benzylphosphine chelate undergo diboration reactions with bis(catecholato)diboron in the absence of a catalyst to yield tetraboranes. The symmetrical diborenes studied undergo 1,2- diborations, whereas an unsymmetrical derivative was found to yield a triborylborane-phosphine adduct as the result of a formal 1,1-diboration. A related borylborylene compound also underwent a 1,2-diboration to produce a borylene-borane adduct. KW - boron KW - diboration KW - chain structures KW - low-valent compounds KW - isomers Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-178276 N1 - This is the pre-peer reviewed version of the following article: T. E. Stennett, R. Bertermann, H. Braunschweig, Angew. Chem. Int. Ed. 2018, 57, 15896., which has been published in final form at https://doi.org/10.1002/anie.201809976. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. ER - TY - THES A1 - Stangl, Johannes Maria T1 - Quantitative Feuchtesensorik mit lumineszierenden Ln-MOFs und Polymer-MOF-Matrix-Membranen T1 - Quantitative humidity sensning with luminescent Ln-MOFs and Polymer-MOF-Matrix-Membranes N2 - In der vorliegenden Arbeit werden die Sensorikeigenschaften der lumineszierenden metallorganischen Gerüstverbindungen (metal-organic frameworks, MOFs) ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(3@∞)[Sr0.90Eu0.10(Im)2] (2), ■(3@∞)[Tb(Im)3] (3), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5), sowohl in Form der Bulksubstanzen als auch in Form von mixed-matrix membranes (MMMs) gegenüber den Analyten Wasser, Methanol, Ethanol und Isopropanol untersucht und mittels kinetischer Betrachtungen quantitativ beschrieben. Hierfür wurde ein Versuchsaufbau konstruiert, der den Anforderungen einer quantitativen Erfassung der Sensorikeigenschaften genügt und einflussgebende externe und interne Parameter, wie die Konzentration des Analyten, Temperatur, Druck, Probenmenge und Probenoberfläche standardisiert, um eine möglichst genaue Erfassung der auftretenden Veränderung der Lumineszenzintensität zu ermöglichen. Zusätzlich wurde eine mathematische Betrachtung genutzt, um die Ergebnisse der Experimente zu interpretieren und in einen Gesamtkontext zu setzen. Für jedes der fünf Modellsysteme wurde je eine Messreihe gegen ein breites Spektrum an relativen Feuchten (Wasser als Analyt) bei 25 °C durchgeführt. Der in allen Fällen auftretende Lumineszenzverlust ließ sich jeweils mittels einer Exponentialfunktion beschreiben und zur Bestimmung der konzentrationsabhängigen Reaktionskonstanten sowie der Halbwertszeiten nutzen. Die gewonnenen Informationen wurden verwendet, um die Reaktionskonstanten und die Schwellenwerte der Sensorik der jeweiligen Systeme zu bestimmten. In weiteren Versuchsreihen wurde der Messaufbau genutzt und der Einfluss der Alkohole Methanol, Ethanol und Isopropanol auf die Lumineszenz der MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) bei verschie-denen Konzentrationen in der Gasphase und bei unterschiedlichen Temperaturen untersucht, quantitativ bestimmt und gemäß der vorangegangen Messreihen für Feuchte beschrieben. Zusätzlich wurde die Veränderung des Lumineszenzmusters der MOFs ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) untersucht. Die Möglichkeiten der Prozessierung von ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), und ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) wurden im Hinblick auf eine praktische Anwendung im Bereich der Sensorik hin untersucht. Hierfür wurden die jeweiligen Bulksubstanzen via Dropcoating in die drei Polymere Polystyrol (PS), Polyvinychlorid (PVC) und Polymethylpenten (TPX) eingebettet. Die so dargestellten MMMs wurden auf ihre Sensorikeigenschaften hin untersucht und der Lumineszenzverlust wurde quantitativ beschrieben. Des Weiteren wurde die korrespondierende Bulksubstanz, in Bezug auf die (konzentrationsabhängigen) Reaktionskonstanten und Halbwertszeiten, mit den MMMs verglichen. Im Rahmen einer Kooperation mit der Arbeitsgruppe von Prof. Dr. Janiak der Heinrich-Heine-Universität Düsseldorf wurden die MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1) und ■(3@∞)[Sr0.90Eu0.10(Im)2] (2) in Polysulfon (PSF) eingebettet und ebenfalls auf ihre Fähigkeit zur Feuchtesensorik hin untersucht. Im Rahmen der vorliegenden Arbeit war es erstmals möglich, die Sensoreigenschaften der genutzten MOFs und CPs (1 - 5) quantitativ zu erfassen und mathematisch zu beschreiben. Ebenso konnte das entwickelte Sensorikkonzept erfolgreich auf die Erfassung von verschiedenen Alkoholen in der Gasphase übertragen werden (für System 1, 4 und 5). Anschließend war es möglich, die genutzten Modellsysteme 1, 2 und 4 unter dem Erhalt der Lumineszenzeigenschaft in verschiedene Polymere einzubetten und deren Eigenschaften zur Feuchtesensorik ebenfalls quantitativ zu erfassen und mathematisch zu beschreiben. Im letzten Abschnitt der Arbeit wurden die beiden porösen ZIFs (zeolitic imidazolate frameworks) Na-Rho-ZMOF (6) und Zn(nmIm)2 (7) mit einer Terbiumnitratlösung behandelt, um durch die Füllung der Kavitäten die Lumineszenzeigenschaft der Terbiumionen in das ZIF zu implementieren. Der Grad und die Qualität der Befüllung wurden anschließend analytisch auf Lumineszenzeigenschaften hin untersucht. Hierbei konnte die Befüllung von Na-Rho-ZMOF (6) erfolgreich nachgewiesen werden, während es bei Zn(nmIm)2 (7) nicht zu einer Befüllung des Porensystems kam. N2 - In the present work, the sensor properties of luminescent metal-organic frameworks (MOFs) ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(3@∞)[Sr0.90Eu0.10(Im)2] (2), ■(3@∞)[Tb(Im)3] (3), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4), and ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) were investigated and quantitatively described. Therefore, bulk substances and MMMs (mixed-matrix membranes) were generated and tested against different analytes like water (relative humidity) and alcohols like, methanol, ethanol and isopropanol. For this purpose, a special experimental setup was constructed, which meets the requirements of a quantitative detection of the sensor properties and influential environmental parameters, such as the concentration of the analyte (e.g. in the form of relative humidity of the atmosphere), temperature, pressure, sample mass and sample surface. This standardized method allowed a precise determination of the occurring luminescence changes. In addition, a mathematical methodology was used to interpret the results of the experiments and place them in an overall context. For each of the five model systems, a series of measurements were carried out against a wide range of relative humidity at 25 °C. In all cases the occurring "turn-off"-effect could be described for each experiment with an exponential function and used to determine the concentration-dependent reaction constants and the half-lifes. The obtained information was used to determine the reaction constants and the thresholds of the sensor properties of the respective systems. In a further series of experiments, the influence of the alcohols methanol, ethanol, and isopropanol onto the luminescence of the MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4), and ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) at various concentrations and temperatures, was quantitatively determined and described mathematically. The relevant properties, such as concentration-dependent reaction constants and half-lifes, were determined. In addition, changes in the luminescence pattern of the MOFs were observed, studied, and described for ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) and ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5). To enable a real application, the possibilities of processing ■(3@∞)[Ba0.98Eu0.02(Im)2] (1) and ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) were investigated. For this purpose, the respective bulk substances were embedded in the three polymers polystyrene (PS), polyvinyl chloride (PVC), and polymethylpentene (TPX) via dropcoating. The MMMs were tested for their ability of sensing humidity. The "turn-off"-effect was quantitatively described and analyzed. The corresponding bulk substance was set in relation to point out the occurring changes in stability (concentration-dependent reaction constants and half-lifes). Within a cooperation with the working group Prof. Janiak of the Heinrich Heine University, the MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1) and ■(3@∞)[Sr0.90Eu0.10(Im)2] (2) were embedded into polysulfone (PSF) and also tested for their ability to sense humidity. In this work it was possible to quantify and mathematically describe the sensor properties of the MOFs and CPs used (1 - 5) for the first time. The developed sensing concept was successfully transferred to detect various alcohols in the gas phase (for systems 1, 4, and 5). Subsequently, it was possible to embed the model systems (1, 2, and 4) used in different polymers, while obtaining the luminescence property. Subsequnt, it was possible to record quantitatively and describe mathematically their properties for humidity sensing. In the last part of the work, the two porous ZIFs (zeolitic imidazolate frameworks) Na-Rho-ZMOF (6) and Zn(nmIm)2 (7) were mixed with a terbium nitrate solution to implement the luminescence properties into the ZIFs by filling the cavities. The degree and the quality of the filling were then checked by a number of analytical methods and the luminescence properties were investigated. The filling of the pore system was detected successfully for Na-Rho-ZMOF (6). For Zn(nmIm)2 (7) no evidence of pore filling was found. KW - MOFs KW - Sensorik KW - Lumineszenz Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173190 ER - TY - THES A1 - Sieck, Carolin T1 - Synthesis and Photophysical Properties of Luminescent Rhodacyclopentadienes and Rhodium 2,2'-Biphenyl Complexes T1 - Synthese und photophysikalische Eigenschaften von lumineszierenden Rhodacyclopentadienen und Rhodium 2,2'-Biphenyl Komplexen N2 - The photochemistry and photophysics of transition metal complexes are of great interest, since such materials can be exploited for a wide range of applications such as in photocatalysis, sensing and imaging, multiphoton-absorption materials and the fabrication of OLEDs. A full understanding of the excited state behavior of transition metal compounds is therefore important for the design of new materials for the applications mentioned above. In principle, the luminescence properties of this class of compounds can be tuned by changing the metal or subtle changes in the ligand environment. Furthermore, transition-metal complexes continue to play a major role in modern synthetic chemistry. In particular, they can realize selective transformations that would either be difficult or impossible by conventional organic chemistry. For example, they enable the efficient and selective formation of carbon–carbon bonds. One famous example of these types of transformations are metal-catalyzed cyclization reactions. Herein, metallacyclopentadiene complexes are considered as key intermediates in a number of metal-mediated or -catalyzed cyclization reactions, i.e. the [2+2+2] cyclotrimerization of alkynes. Recent research has focused on the synthesis and characterization of these metallacyclic intermediates such as MC4 ring systems. Metallacyclopentadienes are structurally related to main group EC4 systems such as boroles, siloles, thiophenes and phospholes. Overall, this group of compounds (EC4 analogues) is well known and has attracted significant attention due to their electron-transport and optical properties. Unlike transition metal analogues, however, these EC4 systems show no phosphorescence, which is due to inefficient SOC compared to 2nd and 3rd row transition metals, which promoted us to explore the phosphorescence potential of metallacyclopentadienes. In 2001, Marder et al. developed a one-pot high-yield synthesis of luminescent 2,5 bis(arylethynyl)rhodacyclopentadienes by reductive coupling of 1,4-diarylbuta-1,3-diynes at a suitable rhodium(I) precursor. Over the past years, a variety of ligands (e.g. TMSA, S,S’ diethyldithiocarbamate, etc.) and 1,4-bis(p-R-phenyl)-1,3-butadiynes or linked , bis(p-R-arylethynyl)alkanes (R = electron withdrawing or donating groups) were investigated and always provided a selective formation of 2,5 bis(arylethynyl)rhodacyclopentadienes, which were reported to be fluorescent despite presence of the heavy atom. To examine the influence of the ligand sphere around the rhodium center on the intersystem-crossing (ISC) processes in the above-mentioned fluorescent rhodacyclopentadienes and to increase the metal character in the frontier orbitals by destabilizing the Rh filled d-orbitals, a -electron donating group was introduced, namely acetylacetonato (acac). Interestingly, in 2010 Tay reacted [Rh(κ2-O,O-acac)(PMe3)2] with ,-bis(p-R-arylbutadiynyl)alkanes and observed not only the fluorescent 2,5 bis(arylethynyl)rhodacyclopentadienes, but also rhodium 2,2’-bph complexes as products, which were reported to be phosphorescent in preliminary photophysical studies. In this work, the reaction behavior of [Rh(κ2-O,O-acac)(L)2] (L = PMe3, P(p-tolyl)3) with different ,-bis(p-R-arylbutadiynyl)alkanes was established. Furthermore, the separation of the two isomers 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium 2,2’-bph complexes (B), and the photophysical properties of those were explored in order to clarify their fundamentally different excited state behaviors. Reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with ,-bis(arylbutadiynyl)alkanes gives exclusively weakly fluorescent 2,5-bis(arylethynyl)rhodacyclopentadienes. Changing the phosphine ligands to PMe3, reactions of [Rh(κ2-O,O-acac)(PMe3)2] and , bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties, as mentioned before. As a result of a normal [2+2] reductive coupling at rhodium, 2,5 bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence. Rhodium 2,2’-bph complexes (B), which show phosphorescence, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent -H-shift. Control of the isomer distribution, of 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium biphenyl complexes (B), is achieved by modification of the linked , bis(arylbutadiynyl)alkane. Changing the linker length from four CH2 to three CH2 groups, dramatically favors the formation of the rhodium biphenyl isomer B, providing a fundamentally new route to access photoactive metal biphenyl compounds in good yields. This is very exciting as the photophysical properties of only a limited number of bph complexes of Ir, Pd and Pt had been explored. The lack of photophysical reports in the literature is presumably due to the limited synthetic access to various substituted 2,2’-bph transition metal complexes. On the other hand, as the reaction of [Rh(κ2-O,O-acac)(P(p-tolyl)3)2] with , bis(arylbutadiynyl)alkanes provides a selective reaction to give weakly fluorescent 2,5 bis(arylethynyl)rhodacyclopentadiene complexes with P(p-tolyl)3 as phosphine ligands, a different synthetic access to 2,5-bis(arylethynyl)rhodacyclopentadiene complexes with PMe3 as phosphine ligands was developed, preventing the time-consuming separation of the isomers. The weak rhodium-phosphorus bonds of 2,5-bis(arylethynyl)rhodacyclopentadiene complexes bearing P(p tolyl)3 as phosphine ligands, relative to those of related PMe3 complexes, allowed for facile ligand exchange reactions. In the presence of an excess of PMe3, a stepwise reaction was observed, giving first the mono-substituted, mixed-phosphine rhodacyclopentadiene intermediates and, subsequently, full conversion to the highly fluorescent 2,5 bis(arylethynyl)-rhodacyclopentadienes bearing only PMe3 ligands (by increasing the reaction temperature). With spectroscopically pure 2,5-bis(arylethynyl)rhodacyclopentadiene complexes A (bearing PMe3 as phosphine ligands) and rhodium 2,2-bph complexes B in hand, photophysical studies were conducted. The 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are highly fluorescent with high quantum yields up to 54% and very short lifetimes (τ = 0.2 – 2.5 ns) in solution at room temperature. Even at 77 K in glass matrices, no additional phosphorescence is observed which is in line with previous observations made by Steffen et al., who showed that SOC mediated by the heavy metal atom in 2,5-bis(arylethynyl)rhodacyclopentadienes and 2,5 bis(arylethynyl)iridacyclopentadienes is negligible. The origin of this fluorescence lies in the pure intra-ligand (IL) nature of the excited states S1 and T1. The HOMO and the LUMO are nearly pure  and * ligand orbitals, respectively, and the HOMO is energetically well separated from the filled rhodium d orbitals. The absence of phosphorescence in transition metal complexes due to mainly IL character of the excited states is not unusual, even for heavier homologues than rhodium with greater SOC, resulting in residual S1 emission (fluorescence) despite ISC S1→Tn being sufficiently fast for population of T1 states. However, there are very few complexes that exhibit fluorescence with the efficiency displayed by our rhodacyclopentadienes, which involves exceptionally slow S1→Tn ISC on the timescale of nanoseconds rather than a few picoseconds or faster. In stark contrast, the 2,2’-bph rhodium complexes B are exclusively phosphorescent, as expected for 2nd-row transition metal complexes, and show long-lived (hundreds of s) phosphorescence (Ф = 0.01 – 0.33) at room temperature in solution. As no fluorescence is detected even at low temperature, it can be assumed that S1→Tn ISC must be faster than both fluorescence and non-radiative decay from the S1 state. This contrasts with the behavior of the isomeric 2,5-bis(arylethynyl)rhodacyclopentadienes for which unusually slow ISC occurs on a timescale that is competitive with fluorescence (vide supra). The very small values for the radiative rate constants, however, indicate that the nature of the T1 state is purely 3IL with weak SOC mediated by the Rh atom. The phosphorescence efficiency of these complexes in solution at room temperature is even more impressive, as non-radiative coupling of the excited state with the ground state typically inhibits phosphorescence. Instead, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to 646 s and to emit with high quantum yields for biphenyl complexes. The exceptionally long lifetimes and small radiative rate constants of the rhodium biphenyl complexes are presumably a result of the large conjugated -system of the organic ligand. According to TD DFT studies, the T1 state involves charge-transfer from the biphenyl ligand into the arylethynyl moiety away from the rhodium atom. This reduces the SOC of the metal center that would be necessary for fast phosphorescence. These results show that the π-chromophoric ligand can gain control over the photophysical excited state behavior to such an extent that even heavy transition metal atoms like rhodium participate in increasing the fluorescence such as main-group analogues do. Furthermore, in the 2,2’-bph rhodium complexes, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to hundreds of s and to emit with exceptional quantum yields. Therefore, investigations of the influence of the ligand sphere around the rhodium center have been made to modify the photophysical properties and furthermore to explore the reaction behavior of these rhodium complexes. Bearing in mind that the P(p-tolyl)3 ligands can easily be replaced by the stronger -donating PMe3 ligands, ligand exchange reactions with N heterocyclic carbenes (NHCs) as even stronger -donors was investigated. Addition of two equivalents of NHCs at room temperature led to the release of one equivalent of P(p-tolyl3) and formation of the mono-substituted NHC rhodium complex. The reaction of isolated mono-NHC complex with another equivalent of NHC at room temperature did not result in the exchange of the second phosphine ligand. Moderate heating of the reaction to 60 °C, however, resulted in the formation of tetra-substituted NHC rhodium complex [Rh(nPr2Im)4]+[acac]-. To circumvent the loss of the other ligands in the experiments described above, a different approach was investigated to access rhodacyclopentadienes with NHC instead of phosphine ligands. Reaction of the bis-NHC complex [Rh(κ2-O,O-acac)(nPr2Im)2] with , bis(arylbutadiynyl)alkanes at room temperature resulted 2,5-bis(arylethynyl)-rhodacyclopentadienes with the NHC ligands being cis or trans to each other as indicated by NMR spectroscopic measurements and single-crystal X-ray diffraction analysis. Isolation of clean material and a fundamental photophysical study could not be finished for reasons of time within the scope of this work. Furthermore, shortening of the well conjugated -system of the chromophoric ligand (changing from tetraynes to diynes) was another strategy to examine the reaction behavior of theses ligands with rhodium(I) complexes and to modify the excited state behavior of the formed rhodacyclopentadienes. The reaction of [Rh(κ2-O,O-acac)(PMe3)2] with 1,7 diaryl 1,6-heptadiynes (diynes) leads to the selective formation of 2,5 bis(aryl)rhodacyclopentadienes. These compounds, however, are very weakly fluorescent with quantum yields ФPL < 1, and very short emission lifetimes in toluene at room temperature. Presumably, vibrational modes of the bis(phenyl)butadiene backbone leads to a higher rate constant for non-radiative decay and is thus responsible for the low quantum yields compared to their corresponding PMe3 complexes with the bis(phenylethynyl)butadiene backbone at room temperature. No additional phosphorescence, even at 77 K in the glass matrix is observed. Chancing the phosphine ligands to P(p-tolyl)3, reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with 1,7-diaryl-1,6-heptadiynes, however, resulted in a metal-mediated or -catalyzed cycloaddition reaction of alkynes and leads to full conversion to dimerization and trimerization products and recovery of the rhodium(I) starting material. This is intuitive, considering that P(Ar)3 (Ar = aryl) ligands are considered weaker -donor ligands and therefore have a higher tendency to dissociate. Therefore, rhodium(I) complexes with aryl phosphines as ligands have an increasing tendency to promote catalytic reactions, while the stronger -donating ligands (PMe3 or NHCs) promote the formation of stable rhodium complexes. Finally, in Chapter 4, the findings of the work conducted on N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (CAACs) is presented. These compounds have unique electronic and steric properties and are therefore of great interest as ligands and organo-catalysts. In this work, studies of substitution reactions involving novel carbonyl complexes of rhodium and nickel are reported. For characterization and comparison of CAACmethyl with the large amount of data available for NHC and sterically more demanding CAAC ligands, an overview on physicochemical data (electronics, sterics and bond strength) is provided. The reaction of [Rh(-Cl)(CO)2]2 with 2 equivalents of CAACmethyl at low temperature afforded the mononuclear complex cis-[(RhCl(CO)2(CAACmethyl)]. However, reacting [Rh( Cl)(CO)2]2 with CAACmethyl at room temperature afforded a mixture of complexes. The mononuclear complex [(RhCl(CO)(CAACmethyl)2], the chloro-bridged complexes [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 and a carbon monoxide activation product were formed. The carbon monoxide activation product is presumably formed via the reaction of two equivalents of the CAAC with CO to give the bis-carbene adduct of CO, and subsequent rearrangement via migration of the Dipp moiety. While classical N-heterocyclic carbenes are not electrophilic enough to react with CO, related diamidocarbenes and alkyl(amino)carbenes undergo addition reactions with CO to give the corresponding ketenes. Consequently, to obtain the CAAC-disubstituted mononuclear complex selectively, 8 equivalents of CAACmethyl were reacted with 1 equivalent of [Rh(-Cl)(CO)2]2. For the evaluation of TEP values, [Ni(CO)3(CAAC)] was synthesized in collaboration with the group of Radius. With the complexes [(RhCl(CO)(CAACmethyl)2] and [Ni(CO)3(CAAC)] in hand, it was furthermore possible to examine the electronic and steric parameters of CAACmethyl. Like its bulkier congeners CAACmenthyl and CAACcy, the methyl-substituted CAAC is proposed to be a notably stronger -donor than common NHCs. While it has a very similar TEP value of 2046 cm-1, it additionally possess superior -acceptor properties (P = 67.2 ppm of phosphinidene adduct). CAACs appear to be very effective in the isolation of a variety of otherwise unstable main group and transition metal diamagnetic and paramagnetic species. This is due to their low-lying LUMO and the small singlet-triplet gap. These electronic properties also allow free CAACs to activate small molecules with strong bonds. They also bind strongly to transition metal centers, which enables their use under harsh conditions. One recent development is the use of CAACs as ligands in transition metal complexes, which previously were only postulated as short-lived catalytic intermediates.[292,345] The availability of these reactive species allows for a better understanding of known catalytic reactions and the design of new catalysts and, moreover, new applications. For example Radius et al.[320] prepared a CAAC complex of cobalt as a precursor for thin-film deposition and Steffen et al.[346] reported a CAAC complex of copper with very high photoluminescent properties, which could be used in LED devices. With the development of cheap and facile synthetic methods for the preparation of CAACs and their corresponding transition metals complexes, as well as the knowledge of their electronic properties, it is safe to predict that applications in and around this field of chemistry will continue to increase. N2 - Die photochemischen und photophysialischen Eigenschaften von Übergangsmetall-komplexen sind von großem Interesse, da solche Materialien für eine Vielzahl von Anwendungen, zum Beispiel in der Photokatalyse, für Sensing und Imaging, als Multiphotonenabsorptionsmaterialien und in der Herstellung von OLEDs genutzt werden können. Ein grundlegendes Verständnis des angeregten Zustands von Übergangsmetallverbindungen ist daher für die Entwicklung neuer Materialen für die oben genannten Anwendungen maßgeblich. Grundsätzlich können die Lumineszenzeigenschaften dieser Klasse von Verbindungen einerseits durch das Metall selbst, oder andererseits durch subtile Modifikation der Ligandensphäre beeinflusst werden. Darüber hinaus spielen Übergangsmetallkomplexe weiterhin eine wichtige Rolle in der modernen Synthesechemie. Insbesondere können Bindungen selektiv geknüpft werden, die in der klassischen organischen Chemie nur schwer zugänglich oder nicht realisierbar sind. So ermöglichen sie beispielsweise die effiziente und selektive Knüpfung von Kohlenstoff-Kohlenstoff-Bindungen. Ein bekanntes Beispiel für solch eine Bindungsknüpfung sind metallkatalysierte Ringschlussreaktionen. Hierbei spielen Metallacyclopentadien-Komplexe als Zwischenstufen bei metallvermittelten oder katalysierten Ringschlussreaktionen, wie beispielsweise der [2+2+2] Cyclotrimerisierung von Alkinen, eine Schlüsselrolle. Die jüngsten Forschungen konzentrierten sich auf die Synthese und Charakterisierung dieser metallacyclischen Zwischenprodukte, auch MC4-Ringsysteme genannt, welche strukturell mit Hauptgruppen-EC4-Systemen wie Borolen, Silolen, Thiophenen und Phospholen verwandt sind. Insgesamt ist diese Gruppe von Verbindungen (EC4-Analoga) wohlbekannt und hat aufgrund ihrer Elektronentransport- und optischen Eigenschaften beträchtliche Aufmerksamkeit erregt. Im Gegensatz zu Übergangsmetallanaloga zeigen Hauptgruppen-EC4-Systeme jedoch keine Phosphoreszenz, was auf eine ineffiziente Spin-Bahn-Kopplung zurückzuführen ist. Im Vergleich dazu zeigen Übergangsmetalle der fünften und sechsten Periode Phosphoreszenz, weshalb es von großem Interesse ist, die Lumineszenzeigenschaften der Metallacyclopentadiene näher zu untersuchen. Im Jahr 2001 entwickelte Marder et al. eine Eintopfsynthese von lumineszierenden 2,5 Bis(arylethinyl)rhodacyclopentadienen durch reduktive Kupplung von 1,4 Diarylbuta 1,3 diinen an einer geeigneten Rhodium(I)-Vorstufe. In den vergangenen Jahren wurden eine Vielzahl von Liganden (z.B. TMSA, S,S'-Diethyldithiocarbamat, usw.) und Substarten (1,4-Bis(p-R-phenyl)-1,3-butadiine oder verknüpfte ,-Bis(p-R-arylethinyl)alkane (R = Elektronen-ziehende oder schiebende Gruppen)) untersucht, wobei stets eine selektive Reaktion zu 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexen beobachtet werden konnte. Trotz des Zentralatoms Rhodium wurde ausschließlich Fluoreszenz beobachtet. Um den Einfluss der Ligandensphäre um das Rhodiumatom auf die Interkombination (Intersystem-Crossing Prozesse, ISC) in diesen fluoreszierenden Rhodacyclopentadienen zu untersuchen und den Metallcharakter in den Grenzorbitalen durch Destabilisierung der Rhodium-d-Orbitale zu erhöhen, wurde Acetylacetonat (acac), ein  Elektronen-schiebender Ligand, eingeführt. Interessanterweise beobachtete Tay im Jahr 2010 durch Reaktion von , Bis(p R arylbutadiinyl)alkanen mit [Rh(κ2-O,O-acac)(PMe3)2] nicht nur die fluoreszierenden 2,5-Bis(arylethinyl)-rhodacyclopentadiene, sondern auch einen isomeren Rhodium 2,2' Biphenyl Komplex, der in ersten photophysikalischen Studien Phosphoreszenz zeigte. In dieser Arbeit wurden das Reaktionsverhalten und die Reaktionsbedingungen von [Rh(κ2 O,O acac)(L)2] (L = PMe3, P(p-tolyl)3) mit verschiedenen , Bis(p R-arylbutadiinyl)alkanen untersucht. Weiterhin wurde die Trennung der beiden Isomere 2,5-Bis(arylethinyl)rhodacyclopentadien (A) und Rhodium-2,2'-bph-Komplex (B) optimiert und die photophysikalischen Eigenschaften der beiden Isomere untersucht. Die Reaktion von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit ,-Bis(arylbutadiinyl)alkanen führt selektiv zum 2,5-Bis(arylethinyl)rhodacyclopentadien-Isomer A, welches nur schwach fluoresziert. Wird jedoch der Phosphanligand P(p-tolyl3) mit PMe3 ersetzt, führt die Reaktion von [Rh(κ2 O,O acac)(PMe3)2] und ,-Bis(arylbutadiinyl)alkanen zu zwei verschiedenen Isomeren von MC4-Metallacyclen mit grundverschiedenen photophysikalischen Eigenschaften. 2,5 Bis(arylethinyl)rhodacyclopentadiene (A) werden durch eine reduktive [2+2]-Kopplung an Rhodium gebildet und weisen eine intensive Fluoreszenz auf. Das zweite Isomer waren Rhodium-2,2'-bph-Komplexe (B), die Phosphoreszenz zeigen. Dies rührt von einer ungewöhnlichen [4+2]-Cycloadditionsreaktion und einer nachfolgenden  H Verschiebung her. Die Kontrolle des Isomeren-Verhältnisses von 2,5-Bis(arylethinyl)rhodacyclopentadienen (A) und Rhodium-2,2'-bph-Komplexen (B) erfolgt durch Modifizierung der Alkankette des verknüpften ,-Bis(arylbutadiinyl)alkans. Die Veränderung der Ligandenbrücke von vier zu drei CH2-Gruppen begünstigt die Bildung des Rhodium-Biphenyl-Isomers B drastisch und bietet einen grundsätzlich neuen Weg, um Zugang zu photoaktiven Biphenyl-Metallverbindungen in guten Ausbeuten zu erhalten. Die photophysikalischen Eigenschaften sind bisher nur von einer begrenzten Anzahl an Biphenyl-Komplexen von Iridium, Palladium und Platin untersucht worden, wobei die geringe Menge an Beispielen vermutlich auf limitierte Synthesestrategien von verschieden-substituierten 2,2'-bph Übergangsmetall-komplexen zurückzuführen ist. Da die Reaktion von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit ,-Bis(arylbutadiinyl)alkanen selektiv zu 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexen mit P(p-tolyl3) als Phosphanliganden führt, und um die zeitaufwendige Trennung der Isomere zu vermeiden, wurde eine neue Synthesestrategie für 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplexe mit PMe3 als Phosphanliganden entwickelt. Die relativ schwache Rhodium-P(p tolyl)3 Bindung von 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplexen ermöglicht Liganden-Austauschreaktionen. Durch Zugabe von PMe3 im Überschuss bei Raumtemperatur wurde eine schrittweise Reaktion beobachtet, wobei zuerst die monosubstituierte Phosphan Rhodacyclopentadien-Zwischenstufe und anschließend durch Erwärmung vollständige Umsetzung und somit der zweifach PMe3 substituierte 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplex erhalten werden konnte. Die isolierten 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexe A (mit PMe3 als Phosphanliganden) und Rhodium-2,2'-bph-Komplexe B wurden auf ihre photophysikalischen Eigenschaften hin untersucht. Isomer A ist stark fluoreszierend mit hohen Quantenausbeuten von bis zu 54% und sehr kurzen Lebenszeiten (τ = 0,2  2,5 ns) in Lösung bei Raumtemperatur. Sogar bei 77 K in Glasmatrizen wird keine Phosphoreszenz beobachtet, was im Einklang mit früheren Beobachtungen von Steffen et al. ist, die zeigten, dass Spin-Bahn-Kopplung (SOC) durch das Schwermetallatom in 2,5-Bis(arylethinyl)rhodacyclopentadienen und 2,5 Bis(arylethinyl)iridacyclopentadienen vernachlässigbar ist. Der Ursprung dieser Fluoreszenz liegt in der reinen Intra-Ligand-Natur der angeregten Zustände S1 und T1. Das HOMO und das LUMO sind fast reine - und *-Ligandenorbitale und das HOMO ist energetisch gut von den gefüllten d-Orbitalen des Rhodiums getrennt. Die Abwesenheit von Phosphoreszenz in Übergangsmetallkomplexen ist aufgrund des dominierenden IL-Charakters der angeregten Zustände bei schwereren Homologen, im Vergleich zu Rhodium, und somit größeren Spin Bahn Kopplungskonstanten nicht ungewöhnlich, auch wenn ISC von S1→Tn ausreichend effizient ist, um Triplett-Zustände zu erreichen. Allerdings gibt es im Vergleich zu unseren Rhodacyclopentadienen sehr wenige Komplexe, die Fluoreszenz mit der Effizienz und mit diesen außergewöhnlich langsamen Intersystem-Crossing Prozessen im Nanosekundenbereich anstatt von einigen Pikosekunden oder schneller besitzen. Im Gegensatz dazu sind die Rhodium-2,2'-bph-Komplexe B ausschließlich phosphoreszierend, wie es für Übergangsmetallkomplexe erwartet wird. Sie zeigen bei langen Lebenszeiten (Hunderte von s) Phosphoreszenz-Quantenausbeuten von bis zu 33% bei Raumtemperatur in Lösung. Da auch bei niedriger Temperatur keine Fluoreszenz festgestellt wird, kann davon ausgegangen werden, dass S1→Tn-ISC schneller als Fluoreszenz und strahlungslose Relaxation aus dem S1-Zustand sein muss. Dies ist jedoch gegenläufig zum Verhalten der isomeren 2,5 Bis(arylethinyl)rhodacyclopentadiene, für die ein ungewöhnlich langsames ISC auf der Zeitskala auftritt, die mit Fluoreszenz konkurrenzfähig ist (siehe oben). Die sehr kleinen Werte für die Strahlungsgeschwindigkeitskonstanten weisen jedoch darauf hin, dass der T1-Zustand reinen 3IL-Charakter mit schwacher Spin-Bahn-Kopplung vom Rhodiumatom ausgehend besitzt. Die Phosphoreszenz-Effizienz dieser Komplexe in Lösung bei Raumtemperatur ist noch beeindruckender, da die nicht-strahlende Kopplung des angeregten Zustands mit dem Grundzustand typischerweise die Phosphoreszenz hemmt. Stattdessen erlaubt die Rigidität des organischen -Systems, dass der ligandenbasierte angeregte Triplettzustand für mehrere hundert s stabil vorliegt und einen effizienten strahlenden Übergang in den Grundzustand vollzieht. Die außergewöhnlich langen Lebensdauern und kleinen Strahlungsgeschwindigkeitskonstanten der Rhodium-2,2'-bph-Komplexe sind vermutlich ein Ergebnis des hochkonjugierten -Systems des organischen Liganden. Laut unseren TD-DFT-Studien wird die Elektronendichte durch Ladungstransfer vom Rhodiumatom auf die Arylethinylreste übertragen und verringert somit die Spin-Bahn-Kopplung des Metallzentrums, die für eine kurze Phosphoreszenzlebenszeit erforderlich wäre. Diese Ergebnisse zeigen, dass der π-chromophore Ligand maßgeblich Einfluss auf den angeregten Zustand hat, dass auch schwere Übergangsmetallkomplexe wie Rhodium fluoreszieren können, wie es eigentlich nur von Hauptgruppenanaloga bekannt ist. Aufgrund der erhaltenen Ergebnisse und im Hinblick auf die Modifikation der optischen Eigenschaften und darüber hinaus das Reaktionsverhalten dieser Rhodiumkomplexe zu erforschen, wurde der Einfluss der Ligandensphäre um das Rhodiumatom untersucht. In Anbetracht dessen, dass die P(p-tolyl)3-Liganden leicht durch die stärker -donierenden PMe3 Liganden er-setzt werden können, wurden Ligandenaustausch-reaktionen mit N heterocyclischen Carbenen (NHCs) als noch stärkere -Donoren unter-sucht. Die Addition von zwei Äqui-valenten NHC führt bei Raumtemperatur zur Substitution von nur einem Äquivalent P(p-tolyl3) und somit zur Bildung des monosubstituierten NHC Rhodiumkomplexes. Die Reaktion des isolierten Mono-NHC-Komplexes mit einem weiteren Äquivalent NHC bei Raumtemperatur führte jedoch auch nicht zum gewünschten Austausch des zweiten Phosphanliganden. Erhöhung der Reaktionstemperatur auf 60 °C resultiert in der Bildung des tetra-substituierten NHC-Rhodiumkomplexes [Rh(nPr2Im)4]+[acac]-. Um zweifach NHC-substituierte 2,5 Bis(arylethinyl)-rhodacyclopentadiene zu erhalten, wurde eine neue Syntheseroute entwickelt. Durch Reaktion des Bis-NHC-Komplexes [Rh(κ2 O,O acac)(nPr2Im)2] mit , Bis(arylbutadiinyl)alkanen bei Raumtemperatur konnten 2,5 Bis(arylethinyl)rhodacyclopentadiene mit NHC-Liganden in cis- und trans-Stellung zueinander erhalten werden und durch NMR-spektroskopische Messungen und Einkristallröntgenbeugungsanalyse identifiziert werden. Die Isolierung und volle Charakterisierung sowie eine fundamentale photophysikalische Studie konnten im Rahmen dieser Arbeit aus Zeitgründen nicht beendet werden. Weiterhin wurden die optischen Eigenschaften und das Reaktionsverhalten von Rhodiumkomplexen mit einem verkürzten konjugierten -System des chromophoren Liganden untersucht. Hierbei werden zur Synthese anstatt Tetrainen, Diine eingesetzt. Die Umsetzung von [Rh(κ2-O,O-acac)(PMe3)2] mit 1,7-Diaryl-1,6-heptadiinen führt zur selektiven Bildung von 2,5 Bis(aryl)rhodacyclopentadienen. Diese Verbindungen sind jedoch nur sehr schwach fluoreszierend, was sich in Quantenausbeuten ФPL < 1% und sehr kurzen Emissionslebenszeiten in Toluol bei Raumtemperatur zeigt. Vermutlich führt Schwingung und Rotation des Bis(phenyl)butadien-Grundgerüsts vermehrt zu strahlungsloser Relaxation in den Grundzustand und ist somit für die geringeren Quantenausbeuten im Vergleich zu PMe3-Komplexen mit dem Bis(phenylethinyl)butadien-Grundgerüst verantwortlich. Phosphoreszenz konnte auch bei Tieftemperaturmessungen bei 77 K in der Glasmatrix nicht beobachtet werden. Die Reaktionen von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit 1,7-Diaryl-1,6-heptadiinen führten jedoch zu einer metallvermittelten oder -katalysierten Cycloadditionsreaktion von Alkinen und zur Bildung von Dimerisierungs- und Trimerisierungsprodukten. Arylphosphan-Liganden (P(Ar)3 (Ar = Aryl)) gelten als schwächere -Donorliganden und haben daher eine höhere Tendenz zur Dissoziation. Hiermit lässt sich erklären, dass Rhodium(I)-Komplexe mit Arylphosphan-Liganden eine zunehmende Tendenz haben, katalytische Reaktionen einzugehen, während die stärkeren -Donor-Liganden (PMe3 oder NHCs) die Bildung stabiler Rhodiumkomplexe begünstigen. In Kapitel 4 werden die Ergebnisse der Untersuchung von NHCs und cyclischen (Alkyl)(amino)carbenen (CAACs) präsentiert. Diese Verbindungen besitzen einzigartige elektronische und sterische Eigenschaften und sind daher als Liganden für Katalysatoren in organokatalytischen Reaktionen von großem Interesse. In dieser Arbeit werden Studien von Substitutionsreaktionen an neuartigen Carbonylkomplexen von Rhodium und Nickel vorgestellt. Zur Charakterisierung und zur Einordnung von CAACmethyl wird mit der großen Menge an Daten, die für NHCs und sterisch- anspruchsvollere CAAC-Liganden zur Verfügung stehen, ein Überblick über physikochemische Parameter (Elektronik, Sterik und Bindungsstärke) gegeben. Die Reaktion von [Rh(-Cl)(CO)2]2 mit zwei Äquivalenten CAACmethyl führte bei tiefer Temperatur zur Bildung des mononuklearen Komplexes cis-[(RhCl(CO)2(CAACmethyl)]. Bei Raumtemperatur jedoch bildeten sich durch Reaktion von [Rh(-Cl)(CO)2]2 mit CAACmethyl der mononukleare Komplex [(RhCl(CO)(CAACmethyl)2], die chlorverbrückten Komplexe [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 und ein Kohlenmonoxid-Aktivierungsprodukt. Das Kohlenmonoxid-Aktivierungsprodukt wird vermutlich durch Reaktion von zwei Äquivalenten des CAACs mit CO und anschließender Umlagerung durch Migration der Dipp-Gruppe gebildet. Während klassische N-heterocyclische Carbene nicht elektrophil genug sind, um mit CO zu reagieren, gehen verwandte Diamidocarbene und (Alkyl)(amino)carbene Additionsreaktionen mit CO ein. Für die selektive Synthese des CAAC-disubstituierten mononuklearen Komplexes wurden acht Äquivalente CAACmethyl mit einem Äquivalent [Rh(-Cl)(CO)2]2 umgesetzt. Für die Auswertung von TEP-Werten wurde [Ni(CO)3(CAAC)] in Zusammenarbeit mit der Gruppe um Radius synthetisiert. Durch Isolierung der Komplexe [(RhCl(CO)(CAACmethyl)2] und [Ni(CO)3(CAAC)] war es weiterhin möglich, die elektronischen und ster-ischen Parameter von CAACmethyl zu untersuchen. Genau wie die sterisch anspruchsvolleren Ver-bindungen CAACmenthyl und CAACcy, ist das Methyl substituierte CAAC im Vergleich zu üblichen NHCs ein besonders starker -Donor. Während dieser einen sehr ähnlichen TEP-Wert von 2046 cm-1 aufweist, besitzt er zusätzlich ausgezeichnete -Akzeptor-Eigenschaften (P = 67,2 ppm Phosphinidenaddukt). Durch das tiefliegende LUMO und das kleine HOMO-LUMO-Gap sind CAACs sehr effektiv für die Isolierung einer Vielzahl von ansonsten instabilen diamagnetischen und paramagnetischen Spezies von Hauptgruppen- und Übergangs-metallverbindngen. Die elektronischen Eigenschaften erlauben auch freien CAACs, kleine Moleküle mit starken Bindungen zu aktivieren. Eine neuere Entwicklung ist die Verwendung von CAACs als Liganden in Übergangsmetall-komplexen, die bisher nur als kurzlebige katalytische Zwischenstufen postuliert wurden.[271,324] Die Isolierung dieser reaktiven Spezies ermöglicht ein besseres Verständnis für bereits bekannte katalytische Reaktionen, sowie die Entwicklung neuer Katalysatoren und Anwendungen. Sol entwickelte Radius et al.[300] zum Beispiel einen CAAC-Komplex aus Kobalt als Vorläufer für die Dünnfilmabscheidung von Werkstoffen und Steffen et al.[326] berichtete von CAAC-Kupfer-Komplexen mit sehr hohen Photolumineszenz-Quantenausbeuten, die in LED Geräten eingesetzt werden könnten. Mit der Entwicklung von günstigen und flexiblen Synthesemethoden für die Herstellung von CAACs und deren entsprechenden Übergangsmetallkomplexen sowie der Kenntnis ihrer elektronischen Eigenschaften scheint es sicher, dass Anwendungen rund um dieses Ligandensystem weiter zunehmen werden. KW - Fluorescence KW - Phosphorescence KW - Rhodium KW - Sonogashira coupling KW - Carbenes KW - Übergangsmetallkomplexe KW - Rhodium KW - Lumineszenz Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154844 ER - TY - THES A1 - Schwenk, Nicola T1 - Seeing the Light: Synthesis of Luminescent Rhodacyclopentadienes and Investigations of their Optical Properties and Catalytic Activity T1 - Licht sehen: Synthese lumineszierender Rhodacyclopentadiene und Untersuchung ihrer optischen Eigenschaften und katalytischen Aktivität N2 - Luminescent organotransition metal complexes are of much current interest. As the large spin-orbit coupling of 2nd and 3rd row transition metals usually leads to rapid intersystem crossing from S1 to T1, which enables phosphorescence, there is a special interest in using triplet-emitting materials in organic or organometallic light emitting diodes (OLEDs). Marder et al. have found that, reductive coupling of both para-R-substituted diarylbutadiynes and diaryldodecatetraynes on Rh(PMe3)4X leads to quantitative yields of bis(arylethynyl)-rhodacyclopentadienes with complete regiospecificity (R = BMes2, H, Me, OMe, SMe, CF3, CN, CO2Me, NMe2, NO2, C≡C-TMS and X = -C≡C-TMS, -C≡C-C6H4-4-NMe2, -C≡C-C≡C-C6H4-4-NPh2, Me, Cl).47,49 Unexpectedly, these compounds show intense fluorescence rather than phosphorescence (ɸf = 0.33-0.69, t = 1.2 3.0 ns). The substituent R has a significant influence on the photophysical properties, as absorption and emission are both bathochromically shifted compared to R = H, especially for R = π-acceptor. To clarify the mechanism of the formation of the rhodacyclopentadienes, and to investigate further their unique photophysical properties, a series of novel, luminescent rhodacyclopentadienes with dithiocarbamate as a bidentate ligand at the rhodium centre has been synthesised and characterised (R = NO2, CO2Me, Me, NMe2, SMe, Ar = C6F4-4-OMe). The rhodacyclopentadienes have been formed via reductive coupling of diaryl undecatetraynes with [Rh(k2-S,S`-S2CNEt2)(PMe3)2]. The structures of a series of such compounds were solved by single crystal X-ray diffraction and are discussed in this work. The compounds were fully characterised via NMR, UV/Vis and photoluminescence spectroscopy as well as by elemental analysis, high-resolution mass spectrometry (HRMS) and X-ray diffraction. When heating the reactions, another isomer is formed to a certain extent. The so-called dibenzorhodacyclopentadienes already appeared during earlier studies of Marder et al., when acetylacetonate (acac) was employed as the bidentate ligand at the Rh-centre. They are probably formed via a [4+2] cycloaddition reaction and C-H activation, followed by a β-H shift. Use of the perfluorinated phenyl moiety Ar = C6F4-4-OMe provided a total new insight into the mechanism of formation of the rhodacyclopentadiene isomers and other reactions. Besides the formation of the expected rhodacyclopentadiene, a bimetallic compound was generated, isolated and characterised via X-ray crystallography and NMR spectroscopy, elemental analysis and high resolution mass spectrometry. For further comparison, analogous reactions with [Rh(k2 S,S` S2CNEt2)(PPh3)2] and a variety of diaryl undecatetraynes (R = NO2 CO2Me, Me, NMe2, SMe, Ar = C6F4-4-OMe) were carried out. They also yield the expected rhodacyclopentadienes, but quickly react with a second or even third equivalent of the tetraynes to form, catalytically, alkyne cyclotrimerisation products, namely substituted benzene derivatives (dimers and trimers), which are highly luminescent. The rhodacyclopentadienes (R = NO2, CO2Me, Me, SMe, Ar = C6F4-4-OMe) are stable and were isolated. The structures of a series of these compounds were obtained via single crystal X-ray crystallography and the compounds were fully characterised via NMR, UV/Vis and photoluminescence spectroscopy as well as by elemental analysis and HRMS. Another attempt to clarify the mechanism of formation of the rhodacyclopentadienes involved reacting a variety of diaryl 1,3-butadiynes (R = CO2Me, Me, NMe2, naphthyl) with [Rh(k2 S,S` S2CNEt2)(PMe3)2]. The reactions stop at an intermediate step, yielding a 1:1 trans π-complex, confirmed by single crystal X-ray diffraction and NMR spectroscopy. Only after several weeks, or under forcing conditions (µw / 80 °C, 75 h), the formation of another major product occurs, having bound a second diaryl 1,3-butadiyne. Based on earlier results of Murata, the product is identified as an unusual [3+2] cycloaddition product, ϭ-bound to the rhodium centre. N2 - Lumineszierende Übergangsmetallkomplexe sind aktuell sehr gefragt. Da die starke Spin-Bahn-Kopplung von Übergangsmetallen der zweiten und dritten Reihe zu einem schnellen Inter-System-Crossing führt, und damit zu Phosphoreszenz, gilt der Verwendung Triplett-emittierender Materialien in organischen und organometallischen Licht emittierenden Dioden (OLEDs) besonders großes Interesse. Marder et al. fanden heraus, dass die reduktive Kupplung von para R-substituierten Diarylbutadiinen und Diaryldodecatetraynen an Rh(PMe3)4X zu quantitativen Ausbeuten von Bis(Arylethinyl)-Rhodacyclopentadienen führt (R = BMes2, H, Me, OMe, SMe, CF3, CN, CO2Me, NMe2, NO2, C≡C-TMS and X = -C≡C-TMS, -C≡C-C6H4-4-NMe2, -C≡C-C≡C-C6H4-4-NPh2, Me, Cl), wobei sich nur ein Regioisomer bildet. Überaschenderweise zeigen diese Verbindungen intensive Fluoreszenz an Stelle von Phosphoreszenz (ɸf = 0.33-0.69, t = 1.2 3.0 ns). Der Substituent R hat großen Einfluss auf die Lumineszenz Eigenschaften. Die Absorption sowie Emission sind im Vergleich zu R = H jeweils bathochrom verschoben, wobei der Effekt im Fall von R = π-Akzeptor stärker ausgeprägt ist. Um den Bildungsmechanismus der Rhodacyclopentadiene aufzuklären und ihre einzigartigen Lumineszenz Eigenschaften intensiver zu untersuchen, wurde eine Reihe von neuen, lumineszierenden Rhodacyclopentadienen mit dem bidentaten Liganden Dithiocarbamat am Rhodium-Zentrum dargestellt und charakterisiert (R = NO2, CO2Me, Me, NMe2, SMe, Ar = C6F4-4-OMe). Die Rhodacyclopentadiene entstanden durch reduktive Kupplung von Diarylundecatetrainen mit [Rh(k2-S,S`-S2CNEt2)(PMe3)2]. Die Strukturen einiger solcher Verbindungen wurden mit Hilfe von Röntgenstrukturanalyse gelöst und werden in der vorliegenden Arbeit diskutiert. Die Verbindungen wurden mit Hilfe von NMR, optischer Spektroskopie, sowie Elementaranalyse, hochauflösender Massenspektrometrie (HRMS) und Röntgenstrukturanalyse vollcharakterisiert. Wurden die Reaktionen erhitzt, bildete sich zu einem gewissen Anteil ein anderes Isomer. Das sogenannte Dibenzorhodacyclopentadien tauchte bereits während früherer Untersuchungen von Marder et al. auf, wobei Acetylacetonat (acac) als bidentater Ligand am Rh-Zentrum eingesetzt wurde. Diese werden möglicherweise durch eine [4+2] Zykloaddition und eine C-H Aktivierung, gefolgt von einem β-H Shift gebildet. Reaktionen die mit dem perfluorierten Phenylrest Ar = C6F4-4-OMe durchgeführt wurden, ermöglichten völlig neue Einblicke in den Bildungsmechanismus der Isomere der Rhodacyclopentadiene und anderer Reaktionen. Neben der Bildung des erwarteten Rhodacyclopentadiens, entstand eine bimetallische Verbindung, welche isoliert und mittels Röntgenstrukturanalyse, NMR-Spektroskopie, Elementaranalyse und HRMS charakterisiert wurde. Um weitere Vergleiche anzustellen, wurde analoge Reaktionen mit einer Reihe von Diarylundecatetrainen (R = NO2 CO2Me, Me, NMe2, SMe, Ar = C6F4-4-OMe) und [Rh(k2 S,S` S2CNEt2)(PPh3)2] durchgeführt. Diese führen ebenfalls zu den erwarteten Rhodacyclopentadienen, jedoch erfolgt schnelle Reaktion mit einem zweiten oder sogar dritten Äquivalent Tetrain um katalytisch Alkin-Trimerisierungsprodukte zu bilden, bei denen es sich um substituierte Benzolderivate (Dimere und Trimere) handelt. Diese sind stark lumineszierend. Die Rhodacyclopentadiene sind stabil und konnten isoliert werden. Von einigen Verbindungen konnten Röntgenstrukturanalysen durchgeführt werden. Alle isolierten Verbindungen wurden mittels NMR und optischer Spektroskopie, sowie Elementaranalyse und HRMS charakterisiert. Ein weiterer Ansatz um den Bildungsmechanismus der Rhodacyclopentadiene aufzuklären beinhaltete die Reaktion einer Reihe von Diarylbutadiinen (R = CO2Me, Me, NMe2, naphthyl) mit [Rh(k2 S,S` S2CNEt2)(PMe3)2]. Die Reaktionen stoppen an der Stelle eines Zwischenproduktes, bei dem es sich um einen 1:1 trans π-Komplex handelt, der mittels Röntgenstrukturanalyse und NMR Spektroskopie bestätigt werden konnte. Erst nach einigen Wochen oder unter harschen Reaktionsbedingungen (µw / 80 °C, 75 h), konnte die Bildung eines weiteren Produktes beobachten werden, an welches ein zweites Diarylbutadiin gebunden ist. Ausgehend von früheren Ergebnissen von Murata, wurde das Produkt als ein [3+2]-Zykloadditionsprodukt identifiziert. KW - Rhodium KW - Fluoreszenz KW - Rhodacyclopentadiene KW - Cyclotrimerisation KW - Fluorescence KW - Organometallic chemistry Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149550 ER - TY - JOUR A1 - Scherpf, Thorsten A1 - Schwarz, Christopher A1 - Scharf, Lennart T. A1 - Zur, Jana-Alina A1 - Helbig, Andeas A1 - Gessner, Viktoria H. T1 - Ylide-Functionalized Phosphines: Strong Donor Ligands for Homogeneous Catalysis JF - Angewandte Chemie - International Edition N2 - Phosphines are important ligands in homogenous catalysis and have been crucial for many advances, such as in cross-coupling, hydrofunctionalization, or hydrogenation reactions. Herein we report the synthesis and application of a novel class of phosphines bearing ylide substituents. These phosphines are easily accessible via different synthetic routes from commercially available starting materials. Owing to the extra donation from the ylide group to the phosphorus center the ligands are unusually electron-rich and can thus function as strong electron donors. The donor capacity surpasses that of commonly used phosphines and carbenes and can easily be tuned by changing the substitution pattern at the ylidic carbon atom. The huge potential of ylide-functionalized phosphines in catalysis is demonstrated by their use in gold catalysis. Excellent performance at low catalyst loadings under mild reaction conditions is thus seen in different types of transformations. KW - carbanion KW - homogeneous catalysis KW - phosphine ligands KW - structure elucidation KW - ylides Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-228551 VL - 57 IS - 39 ER - TY - THES A1 - Nutz, Marco T1 - Synthese und Reaktivität terminaler Arylborylenkomplexe der Gruppe 6 T1 - Syntheses and reactivity of terminal Arylborylen complexes of Group 6 N2 - Die Synthese unterschiedlicher terminaler Gruppe 6 Borylenkomplexe wurde durchgeführt. Dabei wurden neben NMR- und IR-spektroskopischen Untersuchungen, die Identitäten der Verbindungen mittels Röntgenkristallographie festgestellt. Ferner wurden Studien zur Reaktivität des nucleophilen Borzentrums in diesen Verbindungen durchgeführt und die erhaltenen Reaktionsprodukte ebenfalls durch die oben genannten Spektroskopiemethoden charakterisiert. Dabei lag das Augenmerkt besonders auf der Darstellung von monovalenten Borverbindungen, sowie Verbindungen mit Bor-Element-Mehrfachbindungen. N2 - Synthesis and reactivity of group 6 arylborylene complexes. Characterization via NMR, IR spectroscopy and X-Ray analysis. KW - Borylene KW - Borylenkomplexe KW - Bor-Übergangsmetallkomplexe KW - Borkomplexe Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154859 ER -