TY - JOUR A1 - Bura, Thomas A1 - Beaupré, Serge A1 - Légaré, Marc-André A1 - Ibraikulov, Olzhas A. A1 - Leclerc, Nicolas A1 - Leclerc, Mario T1 - Theoretical calculations for highly selective Direct Heteroarylation Polymerization: new nitrile-substituted Dithienyl-Diketopyrrolopyrrole-based polymers JF - Molecules N2 - Direct Heteroarylation Polymerization (DHAP) is becoming a valuable alternative to classical polymerization methods being used to synthesize π-conjugated polymers for organic electronics applications. In previous work, we showed that theoretical calculations on activation energy (Ea) of the C–H bonds were helpful to rationalize and predict the selectivity of the DHAP. For readers’ convenience, we have gathered in this work all our previous theoretical calculations on Ea and performed new ones. Those theoretical calculations cover now most of the widely utilized electron-rich and electron-poor moieties studied in organic electronics like dithienyl-diketopyrrolopyrrole (DT-DPP) derivatives. Theoretical calculations reported herein show strong modulation of the Ea of C–H bond on DT-DPP when a bromine atom or strong electron withdrawing groups (such as fluorine or nitrile) are added to the thienyl moiety. Based on those theoretical calculations, new cyanated dithienyl-diketopyrrolopyrrole (CNDT-DPP) monomers and copolymers were prepared by DHAP and their electro-optical properties were compared with their non-fluorinated and fluorinated analogues. KW - DHAP KW - selectivity KW - theoretical calculations KW - conjugated polymers KW - organic electronics Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197648 SN - 1420-3049 VL - 23 IS - 9 ER - TY - INPR A1 - Auerhammer, Dominic A1 - Arrowsmith, Merle A1 - Böhnke, Julian A1 - Braunschweig, Holger A1 - Dewhurst, Rian D. A1 - Kupfer, Thomas T1 - Brothers from Another Mother: a Borylene and its Dimer are Non-Interconvertible but Connected through Reactivity T2 - Chemical Science N2 - The self-stabilizing, tetrameric cyanoborylene [(cAAC)B(CN)]4 (I, cAAC = 1-(2,6-diisopropylphenyl)-3,3,5,5-tetramethylpyrrolidin-2-ylidene) and its diborene relative, [(cAAC)(CN)B=B(CN)(cAAC)] (II), both react with disulfides and diselenides to yield the corresponding cAAC-supported cyanoboron bis(chalcogenides). Furthermore, reactions of I or II with elemental sulfur and selenium in various stoichiometries provided access to a variety of cAAC- stabilized cyanoboron-chalcogen heterocycles, including a unique dithiaborirane, a diboraselenirane, 1,3-dichalcogena-2,4-diboretanes, 1,3,4-trichalcogena- 2,5-diborolanes and a rare six-membered 1,2,4,5-tetrathia-3,6-diborinane. Stepwise addition reactions and solution stability studies provided insights into the mechanism of these reactions and the subtle differences in reactivity observed between I and II. KW - borylenes KW - diborenes KW - boron KW - carbenes KW - chalcogens Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-157125 ER - TY - INPR A1 - Böhnke, Julian A1 - Braunschweig, Holger A1 - Jiménez-Halla, Oscar A1 - Krummenacher, Ivo A1 - Stennett, Tom E. T1 - Half-Sandwich Complexes of an Extremely Electron-Donating, Re-dox-Active η\(^6\)-Diborabenzene Ligand T2 - Journal of the American Chemical Society N2 - The heteroarene 1,4-bis(CAAC)-1,4-diborabenzene (1; CAAC = cyclic (alkyl)(amino)carbene) reacts with [(MeCN)\(_3\)M(CO)\(_3\)] (M = Cr, Mo, W) to yield half-sandwich complexes of the form [(η\(^6\)-diborabenzene)M(CO)\(_3\)] (M = Cr (2), Mo (3), W (4)). Investigation of the new complexes with a combination of X-ray diffraction, spectroscopic methods and DFT calculations shows that ligand 1 is a remarkably strong electron donor. In particular, [(η\(^6\)-arene)M(CO)\(_3\)] complexes of this ligand display the lowest CO stretching frequencies yet observed for this class of complex. Cyclic voltammetry on complexes 2-4 revealed one reversi- ble oxidation and two reversible reduction events in each case, with no evidence of ring-slippage of the arene to the η\(^4\) binding mode. Treatment of 4 with lithium metal in THF led to identification of the paramagnetic complex [(1)W(CO)\(_3\)]Li·2THF (5). Compound 1 can also be reduced in the absence of a transition metal to its dianion 1\(^{2–}\), which possesses a quinoid-type structure. KW - half-sandwich complexes KW - transition metal complex KW - boron KW - redox reactions Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-156766 N1 - This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Journal of the American Chemical Society, copyright © 2017 American Chemical Society after peer review. To access the final edited and published work see dx.doi.org/10.1021/jacs.7b12394. ER - TY - INPR A1 - Stoy, Andreas A1 - Böhnke, Julian A1 - Jiménez-Halla, J. Oscar C. A1 - Dewhurst, Rian D. A1 - Thiess, Torsten A1 - Braunschweig, Holger T1 - CO\(_2\) Binding and Splitting by Boron–Boron Multiple Bonds T2 - Angewandte Chemie, International Edition N2 - CO\(_2\) is found to undergo room-temperature, ambient- pressure reactions with two species containing boron-boron multiple bonds, leading to incorporation of either one or two CO\(_2\) molecules. In one case, a thermally-unstable intermediate was structurally characterized, indicating the operation of an initial 2+2 cycloaddition mechanism in the reaction. KW - carbon dioxide KW - CO2 fixation KW - diborenes KW - diborynes KW - boron Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-164265 N1 - This is the pre-peer reviewed version of the following article: A. Stoy, J. Böhnke, J. O. C. Jiménez‐Halla, R. D. Dewhurst, T. Thiess, H. Braunschweig, Angew. Chem. Int.Ed. 2018, 57,5947 –5951, which has been published in final form at DOI: 10.1002/anie.201802117. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. ER - TY - INPR A1 - Arrowsmith, Merle A1 - Mattock, James D. A1 - Böhnke, Julian A1 - Krummenacher, Ivo A1 - Vargas, Alfredo A1 - Braunschweig, Holger T1 - Direct access to a cAAC-supported dihydrodiborene and its dianion T2 - Chemical Communications N2 - The two-fold reduction of (cAAC)BHX\(_2\) (cAAC = 1-(2,6-diisopropylphenyl)-3,3,5,5-tetramethylpyrrolidin-2-ylidene; X = Cl, Br) provides a facile, high-yielding route to the dihydrodiborene (cAAC)\(_2\)B\(_2\)H\(_2\). The (chloro)hydroboryl anion reduction intermediate was successfully isolated using a crown ether. Overreduction of the diborene to its dianion [(cAAC)\(_2\)B\(_2\)H\(_2\)]\(^{2−}\) causes a decrease in the B–B bond order whereas the B–C bond orders increase. KW - carbenes KW - diborenes KW - boron KW - main-group chemistry KW - diborynes Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-164276 N1 - This is the pre-peer reviewed version of the following article: Chemical Communications, 2018, 54, 4669-4672 which has been published at DOI: 10.1039/C8CC01580E ER - TY - JOUR A1 - Böhnke, Julian A1 - Brückner, Tobias A1 - Hermann, Alexander A1 - González-Belman, Oscar F. A1 - Arrowsmith, Merle A1 - Jiménez-Halla, J. Oscar C. A1 - Braunschweig, Holger T1 - Single and double activation of acetone by isolobal B≡N and B≡B triple bonds JF - Chemical Science N2 - B≡N and B≡B triple bonds induce C-H activation of acetone to yield a (2-propenyloxy)aminoborane and an unsymmetrical 1-(2- propenyloxy)-2-hydrodiborene, respectively. DFT calculations showed that, despite their stark electronic differences, both the B≡N and B≡B triple bonds activate acetone via a similar coordination-deprotonation mechansim. In contrast, the reaction of acetone with a cAAC-supported diboracumulene yielded a unique 1,2,3-oxadiborole, which according to DFT calculations also proceeds via an unsymmetrical diborene, followed by intramolecular hydride migration and a second C-H activation of the enolate ligand. KW - acetone KW - diborynes KW - iminoboranes KW - boron KW - small-molecule activation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-164286 VL - 9 ER - TY - INPR A1 - Cid, Jessica A1 - Hermann, Alexander A1 - Radcliffe, James E. A1 - Curless, Liam D. A1 - Braunschweig, Holger A1 - Ingleson, Michael J. T1 - Synthesis of Unsymmetrical Diboron(5) Compounds and Their Conversion to Diboron(5) Cations T2 - Organometallics N2 - Reaction of bis-catecholatodiboron-NHC adducts, B\(_2\)Cat\(_2\)(NHC), (NHC = IMe (tetramethylimidazol-2-ylidene), IMes (1,3-dimesitylimidazol-2-ylidene) or IDIPP (1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene)) with BCl3 results in the replacement of the catecholato group bound to the four coordinate boron with two chlorides to yield diboron(5) Lewis acid-base adducts of formula CatB-BCl\(_2\)(NHC). These compounds are precursors to diboron(5) monocations, accessed by adding AlCl\(_3\) or K[B(C\(_6\)F\(_5\))\(_4\)] as halide abstraction agents in the presence of a Lewis base. The substitution of the chlorides of CatB-BCl\(_2\)(NHC) for hydrides is achieved using Bu\(_3\)SnH and a halide abstracting agent to form 1,1-dihydrodiboron(5) compounds, CatB-BH\(_2\)(NHC). Attempts to generate diboron(4) monocations of formula [CatB-B(Y)(NHC)]\(^+\) (Y = Cl or H) led to the rapid formation of CatBY. KW - diboron KW - boronium cations KW - boron KW - Lewis acids KW - electrophiles Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-164299 N1 - This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Organometallics, copyright © 2018 American Chemical Society after peer review. To access the final edited and published work see dx.doi.org/10.1021/acs.organomet.8b00288 ER - TY - THES A1 - Mao, Lujia T1 - Transition Metal-Catalyzed Construction of Benzyl/Allyl sp\(^3\) and Vinyl/Allenyl sp\(^2\) C-B Bonds T1 - Übergangsmetall katalysierte Konstruktion von Benzyl/Allyl sp\(^3\) und Vinyl/Allenyl sp\(^2\) C-B Bindungen N2 - Organoboron compounds, such as benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates, have been synthesized via metal-catalyzed borylations of sp3 C-O and C-H bonds. Thus, Cu-catalyzed borylations of alcohols and their derivatives provide benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates via nucleophilic substitution. The employment of Ti(OiPr)4 turns the OH moiety into a good leaving group (‘OTi’). The products of Pd-catalyzed oxidative borylations of allylic C-H bonds of alkenes were isolated and purified, and their application in the one-pot synthesis of stereodefined homoallyl alcohols was also investigated. Chapter 2 presents a copper-catalyzed synthesis of benzyl-, allyl-, and allenyl-boronates from benzylic, allylic, and propargylic alcohols, respectively, employing a commercially available catalyst precursor, [Cu(CH3CN)4]2+[BF4-]2, and Xantphos as the ligand. The borylation of benzylic alcohols was carried out at 100 oC with 5-10 mol % [Cu(CH3CN)4]2+[BF4-]2, which afforded benzylic boronates in 32%-95% yields. With 10 mol % [Cu(CH3CN)4]2+[BF4-]2, allylic boronates were provided in 53%-89% yields from the borylation of allylic alcohols at 60 or 100 oC. Secondary allylboronates were prepared in 72%-84% yields from the borylation of primary allylic alcohols, which also suggests that a nucleophilic substitution pathway is involved in this reaction. Allenylboronates were also synthesized in 72%-89% yields from the borylation of propargylic alcohols at 40 or 60 oC. This methodology can be extended to borylation of benzylic and allylic acetates. This protocol exhibits broad reaction scope (40 examples) and high efficiency (up to 95% yield) under mild conditions, including the preparation of secondary allylic boronates. Preliminary mechanistic studies suggest that nucleophilic substitution is involved in this reaction. Chapter 3 reports an efficient methodology for the synthesis of vinyl-, allyl-, and (E)-2-boryl allylboronates from propargylic alcohols via copper-catalyzed borylation reactions under mild conditions. In the presence of a commercially available catalyst precursor (Cu(OAc)2 or Cu(acac)2) and ligand (Xantphos), the reaction affords the desired products in up to 92% yield with a broad substrate scope (43 examples). Vinylboronates were synthesized in 50%-83% yields via Cu-catalyzed hydroboration of mono-substituted propargylic alcohols. With 1,1-disubstituted propargylic alcohols as the starting materials and Cu(OAc)2 as the catalyst precursor, a variety of allylboronates were synthesized in 44%-83% yields. The (E)-2-boryl allylboronates were synthesized in 54%-92% yields via the Cu-catalyzed diboration of propargylic alcohols. The stereoselectivity is different from the Pd(dba)2-catalyzed diboration of allenes that provided (Z)-2-boryl allylboronates predominantly. The isolation of an allenyl boronate as the reaction intermediate suggests that an SN2’-type reaction, followed by borylcupration, is involved in the mechanism of the diboration of propargylic alcohols. In chapter 4, a Pd-catalyzed allylic C-H borylation of alkenes is reported. The transformation exhibits high regioselectivity with a variety of linear alkenes, employing a Pd-pincer complex as the catalyst precursor, and the allylic boronate products were isolated and purified. This protocol can also be extended to one-pot carbonyl allylation reactions to provide homoallyl alcohols efficiently. An interesting mechanistic feature is that the reaction proceeds via a Pd(II)/Pd(IV) catalytic cycle. Formation of the Pd(IV) intermediate occurs by a unique combination of an NCNpincer complex and application of F-TEDA-BF4 as the oxidant. An important novelty of the present C-H borylation reaction is that all allyl-Bpin products can be isolated with usually high yields. This is probably a consequence of the application of the NCN-pincer complex as catalyst, which selectively catalyzes C-B bond formation avoiding subsequent C-B bond cleavage based side-reactions N2 - Bisher ist es uns gelungen, effiziente Methoden zur Erzeugung von Benzyl/Allyl-sp3- und Vinyl/Allenyl-sp2-C-B-Bindungen mit Hilfe von Kupfer- oder Palladium-katalysierter Borylierung der entsprechenden Alkohole oder Alkene zu entwickeln, bei welchen es sich um leicht zugängliche Substrate handelt. Kapitel 2 In Kapitel 2 wird das erste Beispiel einer Cu-katalysierten, direkten Borylierung von Alkoholen (40 Beispiele) vorgestellt. Dies stellt eine effiziente Methode dar, um ein breites Spektrum an Benzyl-, Allyl- und Allenyl-Boronaten unter milden Bedingungen herzustellen. Die Verwendung von Ti(OiPr)4 wandelt den OH-Rest in eine hervorragende Abgangsgruppe (‚OTi‘) um, was eine wichtige Rolle bei der Borylierung von Alkoholen spielt. Obwohl ein Cu(II)-Komplex als Vorstufe für den Katalysator eingesetzt wurde, wird davon ausgegangen, dass der aktive Katalysator für die Borylierungsreaktion eine Cu(I)-Spezies ist. Benzylboronate wurden mit Hilfe einer Cu-katalysierten Borylierung von Benzylalkoholen (Gl. Z-1) dargestellt, wobei sowohl der Kupferkomplex [Cu(CH3CN)4]2+[BF4-]2 als auch der Xantphos-Ligand kommerziell erhältlich sind. Für die Borylierung von Benzylalkoholen wurde eine Katalysatorladung von 5 mol% des Kupferkatalysators verwendet, was auf eine hohe Effizienz dieser Methode schließen lässt. Alle Benzylboronate wurden in moderaten bis hohen Ausbeuten (bis zu 95%) isoliert. Diese Vorgehensweise lässt sich ebenso auf die Borylierung von Benzylacetaten anwenden, wobei ein Benzylboronat mit 54% Ausbeute erhalten werden kann. Dies lässt darauf schließen, dass es sich um eine allgemein anwendbare Methode handelt. Ferner wurden Allylboronate mit Hilfe einer vergleichbaren Route wie die Benzylboronate dargestellt (Gl. Z-2), wobei die Temperatur auf 60 °C abgesenkt werden kann. Bei der Borylierung von Allylalkoholen wurden ausgehend von primären Allylalkoholen sekundäre Allylboronate erhalten. Diese Reaktion unterscheidet sich daher von früheren Pd-katalysierten Borylierungen von Zusammenfassung Allylalkoholen, welche ausschließlich zu linearen Allylboronaten aufgrund der Bildung von (3- Allyl)Pd-Intermediaten führten. Anhand dieses Ergebnisses wird angenommen, dass eine nukleophile Substitution Teil des entsprechenden Mechanismus ist. Weiterhin weist diese Reaktion die Möglichkeit auf, chirale Allylboronate ausgehend von verschiedenen primären Allylalkoholen zu erhalten. Diese finden signifikante Anwendung bei der asymmetrischen Synthese. Unseres Wissens nach stellt diese Methode außerdem das erste Beispiel einer katalytischen Synthese von sekundären Allylboronaten dar, die direkt von Alkoholen ausgeht. Die Borylierung konnte ebenfalls mit sekundären und tertiären Allylalkoholen durchgeführt werden, wobei die entsprechenden Allylboronate in guten Ausbeuten erhalten wurden. Diese Cu-katalysierte Borylierungsreaktion kann außerdem Anwendung in der Borylierung von Propargylalkoholen finden (Gl. Z-3), wobei die Darstellung von Allenylboronaten in guten Ausbeuten erreicht wird. Hierbei kann die Reaktionstemperatur weiter auf 40 °C abgesenkt werden. Des Weiteren weist die Regioselektivität der Borylierung von Propargylakoholen darauf hin, dass die Reaktion über eine nukleophile Substitution verläuft. Die in Kapitel 2 vorgestellten Ergebnisse lassen darauf schließen, dass die Cu-katalysierte Borylierung von Akoholen eine allgemein anwendbare Methode zur Synthese von Benzyl-, Allylund Allenylboronaten darstellt. Kapitel 3 In Kapitel 3 wird eine Methode zur Synthese von Vinyl-, Allyl- und (E)-2-Boryl-Allyl-Boronaten mit Hilfe von Cu-katalysierter Borylierung von Propargylalkoholen (43 Beispiele) vorgestellt. Hierzu wurden kommerziell erhältliche Kupferkatalysatoren wie Cu(acac)2 und Cu(OAc)2 eingesetzt. In dieser Vorschrift wird erneut Ti(OiPr)4 verwendet, um durch die Reaktion mit Alkoholen (OH) in eine bessere Abgangsgruppe (OTi) zu erhalten. Zugang zu den (E)-2-Boryl-Allylboronaten wurde mit Hilfe von Cu-katalysierter Diborylierung von Propargylalkoholen (Gl. Z-4) ermöglicht. Die Reaktion kann bei 60 oder 80 °C durchgeführt werden. Die Regioselektivität dieser Cu-katalysierten Diborylierungsreaktion unterscheidet sich von der Pd2(dba)3-katalysierten Diborylierung von Allenen, bei der 2-Boryl-Allyl-Boronate mit C=C Doppelbindungen an der terminalen Position erhalten werden. Die Stereoselektivität weist ebenfalls einen Unterschied zur Pd(dba)2-katalysierten Diborylierung von Allenen auf. Bei dieser werden vorranging (Z)-2-Boryl-Allyl-Boronate mit C=C-Doppelbindungen an der internen Position erzeugt. Dies offenbart eine einzigartige Eigenschaft unserer Cu-katalysierten Diborylierung von Propargylalkoholen, welche die Nützlichkeit von Alkoholen in der Entwicklung der synthetischen Methode erweitert. Die Isolierung eines Allenylboronates als Zwischenprodukt während der Reaktion lässt vermuten, dass der Mechanismus der Diborylierung von Propargylalkoholen gemäß einer SN2‘-Reaktion verläuft, auf die eine Borylcuprierung folgt. Die Borylierung von 1,1-disubstituierten Propargylalkoholen, bei der Cu(OAc)2 als Vorstufe des Katalysators eingesetzt wird, führt zur Bildung von (Z)-Allylboronaten als Hauptprodukt (Gl. Z-5). Die Regio- und Stereoselektivität dieser Reaktion und der Cu-katalysierten Borylcuprierung von Allenylsilanen stimmen überein, wobei ein Unterschied zur Pd-katalysierten Borylierung von Allylalkoholen besteht, bei der vorrangig (E)-Allylboronate entstehen. Es liegt nahe, dass die Cukatalysierte Borylierung von 1,1-disubstituierten Propargylalkoholen eine alternative Route zur Herstellung von (Z)-Allylboronaten darstellt, da die Startmaterialien entweder kommerziell erhältlich oder einfach herzustellen sind. Vinylboronate werden ebenfalls mit Hilfe der Cu-katalysierten Borylierung von monosubstituierten Propargylalkoholen (Gl. Z-6) dargestellt. Die Regioselektivität hierbei stimmt mit der der Cu-katalysierten Borylcuprierung von Alkinen überein. Verglichen mit der Borylcuprierung von Allenen bietet die Borylierung von mono-substituierten Propargylalkoholen einen direkteren Zugang zur Darstellung von Vinylboronaten, da Allene in der Regel ausgehend von Propargylalkoholen dargestellt werden. Alle in Kapitel 3 diskutierten Ergebnisse weisen darauf hin, dass die Cu-katalysierte Borylierung von Propargylalkoholen eine einzigartige Methode zur Synthese von Vinyl-, Allyl- und (E)-2-Boryl- Allylboronaten bietetund eine allgemein anwendbare Vorschrift zur Herstellung von Organobor- Verbindungen mit einfach zugänglichen Startmaterialien darstellt. Die Regio- und Stereoselektivität unterscheidet sich außerdem von den bereits bekannten Methoden. Obwohl Cu(II)-Vorstufen der Katalysatoren eingesetzt werden, handelt es sich bei der katalytisch aktiven Spezies vermutlich um eine Cu(I)-Verbindung, da die Borylierungsreaktionen unter reduktiven Bedingungen durchgeführt werden. Kapitel 4 In Kapitel 4 wurde eine Pd-katalysierte oxidative Borylierung der C-H Bindungen von Alkenen (Gl. Z-7) vorgestellt, bei der eine Vielzahl an linearen Allylboronaten in guten Ausbeuten erzeugt wurde (Gl. Z-7). Außerdem konnten alle Allylboronate isoliert und gereinigt werden, was eine einzigartige Eigenschaft dieser Methode darstellt. Ein interessanter mechanistischer Aspekt dieser Reaktion ist das Durchlaufen eines Pd(II)/Pd(IV)-Katalysezyklus. Die Bildung des Pd(IV)-Intermediates erfolgt durch eine einzigartige Kombination des NCN-Pincerkomplexes A als Katalysaror und F-TEDABF4 als Oxidationsreagenz. Eine wichtige Neuerung der vorgestellten C-H-Borylierungsreaktion ist, dass sämtliche Allyl-BPin-Produkte für gewöhnlich in hohen Ausbeuten isoliert werden können. Dies ist vermutlich eine Folge der Verwendung des Pincer-Komplexes A als Katalysator, welcher selektiv die C-B-Bindungsbildung katalysiert und anschließend, als Pd(IV)-Spezies, C-BBindungsspaltungen als Nebenreaktionen vermeidet. Außerdem kann unsere Vorschrift auf Eintopf-Reaktionen von Aldehyden mit Allylen angewendet werden, um Homoallylalkohole zu erhalten (Gl. Z-8). Zusammengefasst haben wir eine Vielzahl an Borylierungsreaktionen entwickelt, um Benzyl-, Allyl-, Allenyl-, Vinyl- und 2-Boryl-Allylboronate mit Hilfe von Cu- oder Pd-katalysierter Borylierung von Alkoholen und Alkenen, bei denen es sich um leicht zugängliche Startmaterialien handelt, darzustellen. Die Reinigung dieser reaktiven Organobor-Verbindungen weist darauf hin, dass unsere Methoden die Werkzeuge zur Untersuchung der Reaktivität dieser Verbindungen liefern könnten. Die Synthese von sekundären Allylboronaten und 2-Boryl-Allylboronaten beinhaltet außerdem die potenzielle Anwendung in der asymmetrischen Synthese zur Erzeugung wertvoller asymmetrischer Organobor-Verbindungen. KW - borylation KW - synthetic methodology KW - Übergangsmetall KW - Borylierung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154022 ER - TY - INPR A1 - Böhnke, Julian A1 - Dellermann, Theresa A1 - Celik, Mehmet Ali A1 - Krummenacher, Ivo A1 - Dewhurst, Rian D. A1 - Demeshko, Serhiy A1 - Ewing, William C. A1 - Hammond, Kai A1 - Heß, Merlin A1 - Bill, Eckhard A1 - Welz, Eileen A1 - Röhr, Merle I. S. A1 - Mitric, Roland A1 - Engels, Bernd A1 - Meyer, Franc A1 - Braunschweig, Holger T1 - Isolation of diradical products of twisted double bonds T2 - Nature Communications N2 - Molecules containing multiple bonds between atoms—most often in the form of olefins—are ubiquitous in nature, commerce, and science, and as such have a huge impact on everyday life. Given their prominence, over the last few decades, frequent attempts have been made to perturb the structure and reactivity of multiply-bound species through bending and twisting. However, only modest success has been achieved in the quest to completely twist double bonds in order to homolytically cleave the associated π bond. Here, we present the isolation of double-bond-containing species based on boron, as well as their fully twisted diradical congeners, by the incorporation of attached groups with different electronic properties. The compounds comprise a structurally authenticated set of diamagnetic multiply-bound and diradical singly-bound congeners of the same class of compound. KW - diradicals KW - diborenes KW - carbenes KW - boron Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-160248 N1 - Submitted version of Julian Böhnke, Theresa Dellermann, Mehmet Ali Celik, Ivo Krummenacher, Rian D. Dewhurst, Serhiy Demeshko, William C. Ewing, Kai Hammond, Merlin Heß, Eckhard Bill, Eileen Welz, Merle I. S. Röhr, Roland Mitrić, Bernd Engels, Franc Meyer & Holger Braunschweig: Isolation of diborenes and their 90°-twisted diradical congeners. Nature Communications. Volume 9, Article number: 1197 (2018) doi:10.1038/s41467-018-02998-3 ER - TY - INPR A1 - Stennett, Tom A1 - Mattock, James A1 - Vollert, Ivonne A1 - Vargas, Alfredo A1 - Braunschweig, Holger T1 - Unsymmetrical, Cyclic Diborenes and Thermal Rearrangement to a Borylborylene T2 - Angewandte Chemie, International Edition N2 - Cyclic diboranes(4) based on a chelating monoanionic, benzylphosphine linker were prepared by boron-silicon exchange between arylsilanes and B\(_2\)Br\(_4\). Coordination of Lewis bases to the remaining sp\(^2\) boron atom yielded unsymmetrical sp\(^3\)-sp\(^3\) diboranes, which were reduced with KC\(_8\) to their corresponding trans-diborenes. These compounds were studied by a combination of spectroscopic methods, X-ray diffraction and DFT calculations. PMe\(_3\)-stabilized diborene 6 was found to undergo thermal rearrangement to gem- diborene 8. DFT calculations on 8 reveal a polar boron-boron bond, and indicate that the compound is best described as a borylborylene. KW - boron KW - borylene KW - multiple bonds KW - rearrangement KW - DFT calculations Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-160258 N1 - This is the pre-peer reviewed version of the following article: T. E. Stennett, J. D. Mattock, I. Vollert, A. Vargas, H. Braunschweig, Angew. Chem. Int. Ed. 2018, 57, 4098., which has been published in final form at DOI: 10.1002/anie.201800671. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. VL - 57 ER -