TY - INPR A1 - Auerhammer, Dominic A1 - Arrowsmith, Merle A1 - Böhnke, Julian A1 - Braunschweig, Holger A1 - Dewhurst, Rian D. A1 - Kupfer, Thomas T1 - Brothers from Another Mother: a Borylene and its Dimer are Non-Interconvertible but Connected through Reactivity T2 - Chemical Science N2 - The self-stabilizing, tetrameric cyanoborylene [(cAAC)B(CN)]4 (I, cAAC = 1-(2,6-diisopropylphenyl)-3,3,5,5-tetramethylpyrrolidin-2-ylidene) and its diborene relative, [(cAAC)(CN)B=B(CN)(cAAC)] (II), both react with disulfides and diselenides to yield the corresponding cAAC-supported cyanoboron bis(chalcogenides). Furthermore, reactions of I or II with elemental sulfur and selenium in various stoichiometries provided access to a variety of cAAC- stabilized cyanoboron-chalcogen heterocycles, including a unique dithiaborirane, a diboraselenirane, 1,3-dichalcogena-2,4-diboretanes, 1,3,4-trichalcogena- 2,5-diborolanes and a rare six-membered 1,2,4,5-tetrathia-3,6-diborinane. Stepwise addition reactions and solution stability studies provided insights into the mechanism of these reactions and the subtle differences in reactivity observed between I and II. KW - borylenes KW - diborenes KW - boron KW - carbenes KW - chalcogens Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-157125 ER - TY - INPR A1 - Böhnke, Julian A1 - Braunschweig, Holger A1 - Jiménez-Halla, Oscar A1 - Krummenacher, Ivo A1 - Stennett, Tom E. T1 - Half-Sandwich Complexes of an Extremely Electron-Donating, Re-dox-Active η\(^6\)-Diborabenzene Ligand T2 - Journal of the American Chemical Society N2 - The heteroarene 1,4-bis(CAAC)-1,4-diborabenzene (1; CAAC = cyclic (alkyl)(amino)carbene) reacts with [(MeCN)\(_3\)M(CO)\(_3\)] (M = Cr, Mo, W) to yield half-sandwich complexes of the form [(η\(^6\)-diborabenzene)M(CO)\(_3\)] (M = Cr (2), Mo (3), W (4)). Investigation of the new complexes with a combination of X-ray diffraction, spectroscopic methods and DFT calculations shows that ligand 1 is a remarkably strong electron donor. In particular, [(η\(^6\)-arene)M(CO)\(_3\)] complexes of this ligand display the lowest CO stretching frequencies yet observed for this class of complex. Cyclic voltammetry on complexes 2-4 revealed one reversi- ble oxidation and two reversible reduction events in each case, with no evidence of ring-slippage of the arene to the η\(^4\) binding mode. Treatment of 4 with lithium metal in THF led to identification of the paramagnetic complex [(1)W(CO)\(_3\)]Li·2THF (5). Compound 1 can also be reduced in the absence of a transition metal to its dianion 1\(^{2–}\), which possesses a quinoid-type structure. KW - half-sandwich complexes KW - transition metal complex KW - boron KW - redox reactions Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-156766 N1 - This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Journal of the American Chemical Society, copyright © 2017 American Chemical Society after peer review. To access the final edited and published work see dx.doi.org/10.1021/jacs.7b12394. ER - TY - THES A1 - Böhnke, Julian T1 - Reaktivität niedervalenter, Carben-stabilisierter Bor-Bor-Mehrfachbindungssysteme T1 - Reactivity of low-valent, carbene-stabilized boron-boron multiple bonds N2 - Im Rahmen dieser Arbeit war es möglich, vielfältige Reaktivitäten des Diborakumulens (7) und davon abgeleiteter Verbindungen zu untersuchen. Häufig begründet in den bemerkenswerten elektronischen Eigenschaften der verwendeten CAAC-Liganden, konnten neuartige und teilweise ungewöhnliche Bindungsmodi an niedervalenten Borspezies beobachtet werden. Der Einfluss der starken σ-Donor-Fähigkeiten und der hohen π-Acidität der cyclischen (Alkyl)(amino)carbene spiegeln sich hierbei in vergleichenden Reaktivitätsstudien mit den entsprechenden NHC-stabilisierten Bor–Bor-Mehrfachbindungssystemen wider. Zunächst wurde jedoch auf die Synthese weiterer Diborakumulene eingegangen und am Beispiel der Bis(CAACCy)-stabilisierten B2-Einheit (12) erfolgreich durchgeführt. Mit vergleichbaren 11B-NMR-Verschiebungen und Bindungslängen unterscheidet sich die Verbindung in ihren elektronischen Eigenschaften kaum von B2(CAAC)2 (7), welches aufgrund der besseren Zugänglichkeit für die Reaktivitätsstudien eingesetzt wurde. Grundlegende Studien zum Redoxverhalten des Diborakumulens zeigten die vollständige, oxidative Spaltung der Bor–Bor-Bindung mit Chlorgas unter Ausbildung eines CAAC-stabilisierten Bortrichlorid-Fragments. Die Arbeiten zum Bis(boraketen) 17 und die Darstellung des Bis(boraketenimins) 18 durch die Umsetzung des Diborakumulens mit Kohlenstoffmonoxid bzw. geeigneten Isocyaniden, stellte einen ersten größeren Teilbereich dieser Arbeit dar. Durch die enorme π-Rückbindung in die CAAC-Liganden und die CO-Liganden aus der elektronenreichen B2-Einheit kommt es in 17 zu einer Aufweitung der B–B-Bindung und orthogonal zueinander stehenden Molekülhälften. Im weiteren Verlauf konnte ein Mechanismus für die Addition von CO an B2(CAAC)2 gefunden werden, in dem aufgrund hoher energetischer Barrieren eine Umsetzung zum Bis(boralacton) – einer Spezies, die für die Reaktion von Kohlenstoffmonoxid mit NHC-stabilisierten Diborinen gefunden wurde – unterbunden wird. Die elektronischen und strukturellen Unterschiede zwischen Diborinen und dem Diborakumulen 7 konnten so erstmals anhand definierter Reaktionsbedingungen evaluiert werden. Die Reaktion von 7 mit zwei Äquivalenten tert-Butylisocyanid führte zur Bildung eines Bis(boraketenimins). Ähnlich wie im Bis(boraketen) 17 kommt es auch hier unter anderem zu einer starken π-Rückbindung in den Isocyanidliganden einhergehend mit der Aufweitung der B–B-Bindung und orthogonal zueinander stehenden Molekülhälften. Die Thermolyse der Verbindung führte zu einer Abspaltung zweier tert-Butylradikale und zur Bildung des ersten, strukturell charakterisierten Dicyanodiborens 20. Das Dicyanodiboren zeigte hier eine strukturelle Besonderheit: Während ein CAAC-Ligand in Konjugation mit dem π-System der B2-Einheit steht, zeigt der zweite CAAC-Ligand eine orthogonale Orientierung zu diesem, was vermutlich zu einer Polarisierung der B=B-Doppelbindung führt und potentiell hochinteressante Reaktivitäten ermöglicht. So führte die Umsetzung von 20 mit Kohlenstoffmonoxid zur Spaltung der B–B-Bindung und Insertion eines µ2-gebundenen CO-Moleküls in die BB-Einheit. Die Tatsache, dass ein ähnliches Reaktionsverhalten bisher nur vom ebenfalls CAAC-stabilisierten Dihydrodiboren 22 bekannt war (vide infra), demonstrierte an diesem Beispiel eindeutig die bemerkenswerten Fähigkeiten von CAACs reaktive, niedervalente Hauptgruppenelementverbindungen zu stabilisieren. Die Reaktivität des Diborakumulens 7 gegenüber Diwasserstoff stellte einen weiteren, großen Teilaspekt dieser Arbeit dar. Das Rühren von 7 unter einer H2-Atmosphäre führte zur 1,2-Addition des H2-Moleküls an die B2-Einheit unter Ausbildung eines trans-ständigen, Basen-stabilisierten Dihydrodiborens 22. Im Gegensatz zum Dicyanodiboren (20) handelt es sich bei 22 um eine C2-symmetrische Verbindung, dessen π-System im HOMO aufgrund der π-Acidität der CAAC-Liganden über das gesamte C–B–B–C-Grundgerüst delokalisiert ist. Die Hydrierung wurde ebenfalls mit hochreinem D2 durchgeführt, um eine Hydridabstraktion aus dem Lösungsmittel auszuschließen. DFT-Berechnungen konnten zudem die Bor-gebundenen Wasserstoffatome als Hydride klassifizieren und den Mechanismus der Addition von Diwasserstoff an die B2-Einheit ermitteln. Mit einem berechneten, exothermen Reaktionsverlauf stellt die Umsetzung von 7 zu 22 auf diesem Weg das erste Beispiel einer nicht katalysierten Hydrierung einer homodinuklearen Mehrfachbindung der 2. Periode dar. Das CAAC-stabilisierte Dihydrodiboren 22 zeigte im Verlauf dieser Arbeit vielfältige Bindungsmodi aus der Umsetzung mit Kohlenstoffmonoxid. Unter anderem die Eigenschaft von CAACs, eine 1,2-Wasserstoffwanderung von angrenzenden BH-Einheiten auf das Carbenkohlenstoffatom zu begünstigen, führte zur Ausbildung verschiedener Tautomere. Während das Produkt aus der formalen Addition und Insertion von zwei CO-Molekülen (24) lediglich unter CO-Atmosphäre stabil war, konnte unter Argonatmosphäre ein Tautomerengemisch von 25 mit intakter Bor–Bor-Bindung und einer Boraketeneinheit isoliert werden. Während dieser Prozess vollständig reversibel war, führte das Erhitzen von 25 zur Bildung eines Alkylidenborans (26), welches ebenfalls in zwei tautomeren Formen vorlag. Darüber hinaus konnte die Bildung einer weiteren Spezies (27) in geringen Ausbeuten beobachtet werden, die aus der vollständigen Spaltung eines CO-Fragments und der Bildung einer intramolekularen C≡C-Dreifachbindung resultierte. VT-NMR- und Korrelationsexperimente, Kristallisationen unter verschiedenen Atmosphären, Schwingungsspektroskopie sowie die mechanistische Analyse der Umsetzungen basierend auf DFT-Berechnungen ermöglichten hier einen tiefen und detaillierten Einblick in die zugrunde liegenden Prozesse. Die thermische Umsetzung des Dihydrodiborens 22 mit Acetylen führte wider Erwarten nicht zur Cycloaddition an die B=B-Doppelbindung, sondern zur Insertion in diese. Das erhaltene Produkt 28 zeigte eine C2-symmetrische Struktur und durchgängig sp2-hybridisierte Kohlenstoff- und Borzentren entlang der Hauptachse. Eine DFT-Studie ergab ein konjugiertes π-System, dass dem 1,3,5-Hexatrien stark ähnelte. Eine weitere Umsetzung von 22 mit zwei Äquivalenten Diphenyldisulfid führte ebenfalls zur Spaltung der B=B-Doppelbindung und zur Ausbildung eines CAAC-stabilisierten, sp3-hybridisierten Monoborans. Das Diborakumulen 7 konnte in zwei weiteren Reaktivitätsstudien selektiv mit Kohlenstoffdioxid und Aceton umgesetzt werden. Die Reaktion von B2(CAAC)2 mit zwei CO2-Molekülen führte zur Ausbildung einer Spezies mit einer Boraketenfunktionalität und einem Borsäureesterderivat (30). Für die Aktivierung von Kohlenstoffdioxid an unpolaren Mehrfachbindungen gab es bisher kein Beispiel in der Literatur, sodass diese mechanistisch untersucht wurde. Hier erfolgte die Reaktion über eine ungewöhnliche, sukzessive [2+1]-Cycloaddition an die koordinativ ungesättigten Boratome mit einem insgesamt stark exergonen Verlauf. Die Umsetzung von 7 mit Aceton führte zur Ausbildung eines fünfgliedrigen Heterocyclus mit einer C=C-Doppelbindung und asymmetrisch verbrückter Bor–Bor-Bindung mit einem orthogonal zum Heterocyclus stehenden μ2-Hydrid. Interessanterweise zeigte hier eine vergleichende Studie von Tobias Brückner an einem SIDep-stabilisierten Diborin bei einer analogen Reaktionsführung ein 1,2-Enol-Additionsprodukt, sodass der zugrunde liegende Reaktionsmechanismus ebenfalls untersucht wurde. Während das 1,2-Enol-Additionsprodukt als Intermediat zur Bildung von 31 beschrieben werden konnte, führten moderate Energiebarrieren und ein deutlich exergoner Reaktionsverlauf im Fall des Diborakumulens zu einer doppelten Acetonaktivierung. Für 31 konnte darüber hinaus ein Isomerengemisch beobachtet werden, das nach der Bildung nicht mehr ineinander überführt werden konnte. Die Reaktion des Diborakumulens mit Münzmetallhalogeniden ergab für die Umsetzung von 7 mit drei Äquivalenten Kupfer-(I)-chlorid-Dimethylsulfidaddukt eine T-förmige Koordination von drei CuCl-Fragmenten an die B2-Einheit (33). Setzte man das Diborakumulen 7 mit einem Äquivalent IMeMe um, bildete sich das heteroleptisch substituierte Mono-Basenaddukt 34. Dieses zeigte eine thermische Labilität, sodass sich nach einem Zeitraum von 24 Stunden bei erhöhter Temperatur selektiv das Produkt einer CH-Aktivierung isolieren ließ. Das gleiche Produkt (35) konnte ebenfalls durch die Zugabe einer Lewis-Säure (Galliumtrichlorid) zu 34 nach kurzer Zeit bei Raumtemperatur erhalten werden. Setzte man 34 mit einem weiteren Äquivalent IMeMe um, so bildete sich das Bis(IMeMe)-Addukt des Diborakumulens 36, das zunächst an das Bis(CO)-Addukt 17 erinnerte und durch die hohe sterische Spannung im System eine stark aufgeweitete Bor–Bor-Bindung besitzt. Die Reaktion von 34 gegenüber Kohlenstoffmonoxid lieferte das heteroleptisch substituierte Basenaddukt 37. Das elektronenreiche Boratom des Boraketenstrukturfragments führt hier zu einer erheblichen π-Rückbindung in den CO-Liganden, der die niedrigsten, zu diesem Zeitpunkt jemals beobachteten Wellenzahlen für die CO-Schwingung in einer derartigen Funktionalität aufweist. Eine abschließende Umsetzung des Mono-Basenaddukts 34 mit Diwasserstoff führte zur spontanen Hydrierung beider Boratome und zur Spaltung der Bor–Bor-Bindung. Die Reaktionsmischung zeigte nach erfolgter Reaktion ein 1:1-Verhältnis aus einem CAAC-stabilisierten BH3-Fragment 39 und einem zweifach Basen-stabilisierten BH-Borylen 38. Die Spaltung einer Bor–Bor-(Mehrfach)-Bindung zur Synthese von heteroleptisch Lewis-Basen-stabilisierten Borylenen stellte dabei einen bisher nicht bekannten Zugang zu dieser Verbindungsklasse dar. Ein sehr großer Teilbereich dieser Arbeit beschäftigte sich mit der Synthese und Reaktivität von Diborabenzol-Derivaten. Setzte man das Diborakumulen 7 mit Acetylen um, so konnte die Bildung eines CAAC-stabilisierten 1,4-Diborabenzols beobachtet werden. Das planare Grundgerüst, C–C- und B–C-Bindungen im Bereich von (partiellen) Doppelbindungen, stark entschirmte Protonen des zentralen B2C4H4-Heterocyclus, Grenzorbitale, die denen des Benzols ähneln, sowie negative NICS-Werte stellen 42 als einen 6π-Aromaten dar, der mit seinem energetisch stark destabilisierten HOMO als elektronenreicher Ligand in der Übergangsmetallchemie eingesetzt werden konnte (vide infra). Die Reaktion von B2(CAAC)2 mit Propin bzw. 2-Butin lieferte hingegen 2π-aromatische, paramagnetische Verbindungen mit Schmetterlingsgeometrie aus der [2+2]-Cycloaddition an die Bor–Bor-Bindung und anschließender Umlagerung zu den thermodynamisch stabileren 1,3-Diboreten. Die weitere, thermisch induzierte Umsetzung von 40 und 41 mit Acetylen ermöglichte die Darstellung der Methyl-substituierten 1,4-Diborabenzol-Derivate 43 und 44. Um die Eigenschaften des CAAC-stabilisierten 1,4-Diborabenzols zu analysieren, wurde sowohl die Redoxchemie von 42 als auch dessen potentieller Einsatz als η6-Ligand an Übergangsmetalle der Chromtriade untersucht. Es zeigte sich, dass durch die Reduktion mit Lithium die Darstellung des zweifach reduzierten Diborabenzols 45 möglich war. Die Ausbildung eines quinoiden Systems führte hier zu einem Isomerengemisch aus cis/trans-konfigurierten CAAC-Liganden. Die Umsetzung der isolierten Verbindung mit 0.5 Äquivalenten Zirkoniumtetrachlorid führte quantitativ zur Bildung von 42 und demonstrierte somit das hohe Reduktionspotential der dilithiierten Spezies. Durch die Reaktion von 42 mit [(MeCN)3M(CO)3] (M = Cr, Mo, W) gelang darüber hinaus die Darstellung von 18-Valenzelektronen-Halbsandwichkomplexen. Die Koordination des elektronenreichen Heteroarens an die Metalltricarbonyl-Segmente lieferte die niedrigsten, zu diesem Zeitpunkt je beobachteten Carbonylschwingungen für [(η6-aren)M(CO)3]-Komplexe, die durch den starken, elektronendonierenden Einfluss des Liganden auf das Metall und die daraus resultierende erhebliche Rückbindung in die antibindenden π*-Orbitale der CO-Liganden hervorgerufen werden. DFT-Analysen der Verbindungen zeigten zudem im Vergleich zu [(η6-C6H6)Cr(CO)3] signifikant höhere Bindungsenergien zwischen dem Metallfragment und dem 1,4-Diborabenzol und unterstreichten zusammen mit weiteren spektroskopischen und theoretischen Analysen die bemerkenswerten Eigenschaften von 42 als überaus stark elektronendonierender Ligand. Letztlich gelang in einer Reaktivitätsstudie am Wolframkomplex 48 die Darstellung eines Mono-Radikalanions (49), das vermutlich das erste Beispiel eines monoanionischen Aren-Metalltricarbonyl-Komplexes der Gruppe 6 darstellt. Ein abschließendes, großes Thema dieser Arbeit beschäftigte sich mit der Synthese von Biradikalen aus verdrehten Doppelbindungen und dem Vergleich mit den verwandten, diamagnetischen Diborenen. Die Reaktion des Diborakumulens mit verschieden substituierten Disulfiden und einem Diselenid führte zur Ausbildung von persistenten, paramagnetischen, biradikalischen Spezies durch die 1,2-Addition an die Bor–Bor-Mehrfachbindung. Während die Addition der Substrate an das IDip-stabilisierte Diborin 5 geschlossenschalige, diamagnetische Diborene mit coplanarer Anordnung der Substituenten lieferte, konnte nach der Addition der Substrate an das Diborakumulen 7 stets eine Bor–Bor-Einfachbindung mit orthogonaler Ligandenorientierung festgestellt werden. ESR-spektroskopische und magnetische Messungen der Proben ergaben für 51e einen Triplett-Grundzustand bei Raumtemperatur und durch den captodativen-Effekt der π-Donor Stickstoffatome und der π-Akzeptor Boratome eine erhebliche Delokalisierung der ungepaarten Elektronen in die Liganden. Detaillierte theoretische Studien konnten darüber hinaus zeigen, dass die Singulett-Zustände der synthetisierten Diborene stabiler als die Triplett-Zustände sind und dass die Triplett-Zustände der paramagnetischen Verbindungen 51a,b,e stabiler als die entsprechenden Singulett-Zustände sind. Die Verbindungen liegen stets in ihrem Grundzustand vor und lieferten somit hochinteressante Modellsysteme zum tieferen Verständnis dieser Verbindungsklasse. N2 - Within the scope of this work, various reactivities of the diboracumulene 7 and derivatives thereof were investigated. Induced by the exceptional electronic properties of the applied CAAC ligands, unprecedented and exceptional binding modes of low-valent boron species have been observed. The influence of the strong σ-donor properties and the pronounced π-acidity of the cyclic (alkyl)(amino)carbenes is reflected in comparative reactivity studies with the respective NHC-stabilized boron–boron multiple bonded systems. Initially the synthesis of further diboracumulenes was attempted and realized with a bis(CAACCy)-stabilized B2 unit (12). With comparable 11B NMR shifts and similar bond lengths, the compound does not significantly differ in terms of its electronic properties from B2(CAAC)2 (7), which was used in the reactivity studies due to its superior accessibility. Fundamental studies on the redox properties of B2(CAAC)2 showed the complete oxidative cleavage of the boron–boron bond with chlorine gas while forming a CAAC-stabilized boron trichloride fragment. Research on the bis(boraketene) 17 and the synthesis of the bis(boraketeneimine) 18 through the treatment of the diboracumulene 7 with carbon monoxide and suitable isocyanides represents the first major section of this work. Due to the strong π-backbonding into the CAAC ligands and the CO ligands from the electron rich B2 unit, the B–B bond of 17 is significantly elongated and the π-frameworks are mutually orthogonal. By means of DFT calculations the reaction pathway could be investigated, which shows high energetic barriers for the conversion of 17 to the bis(boralactone), a species that was observed for the NHC-stabilized boron–boron multiple bonds. In this way the electronic and structural differences between diborynes and the diboracumulene 7 could be evaluated under defined reaction conditions for the first time. The reaction of 7 with two equivalents of tert-butyl isocyanide led to the formation of a bis(boraketeneimine). Comparable to the bis(boraketene), 18 shows strong π-backbonding into the isocyanide ligands, which is concomitant with an elongated B–B bond and orthogonally oriented boraketeneimine moieties. Thermolysis of the compound led to the elimination of two tert-butyl radicals and formation of the first structurally characterized dicyanodiborene (20). The dicyanodiborene shows a structural peculiarity: While one CAAC ligand is in conjugation with the π-system of the B2 unit, the second one shows an orthogonal orientation to the π-framework, which presumably results in polarization of the B=B double bond and potentially enables highly interesting reactivity. Thus, the addition of carbon monoxide to 20 led to the splitting of the B–B bond and the insertion of a µ2-bound CO molecule into the B2 unit. The fact that similar reactivity is only known from the CAAC-stabilized dihydrodiborene 22 (vide infra) clearly demonstrates the exceptional properties of CAACs to stabilize highly reactive, low-valent main group compounds. The reactivity of the diboracumulene 7 towards dihydrogen represents another major section of this work. When 7 was stirred under a H2 atmosphere the H2 molecule was added across the B2 unit in a 1,2-addition, leading to the formation of a base-stabilized trans dihydrodiborene. In contrast to the dicyanodiborene, 22 is C2 symmetric and the π-system in the HOMO is delocalized over the whole C–B–B–C framework due to the π-acidity of the CAAC ligands. The hydrogenation was also carried out with pure D2 to rule out hydrogen abstraction from the solvent. DFT calculations also classified the boron-bound hydrogens as hydrides and determined the mechanism of the dihydrogen addition to the B2 unit. With a calculated exothermic reaction pathway, the reaction from 7 to 22 represents the first example of an uncatalyzed hydrogenation of a homodinuclear multiple bond of the second row. In this work the CAAC-stabilized dihydrodiborene 22 showed diverse binding modes when treated with carbon monoxide. Among other outcomes, the propensity to promote 1,2-hydrogen shifts from adjacent BH-moieties to the carbene carbon atom led to the formation of various tautomers. While the product of the formal addition and insertion of two CO molecules was only stable under a CO atmosphere (24), under argon atmosphere two tautomers of 25 with a boron–boron bond and boraketene unit could be isolated. This process was found to be completely reversible. However, heating of 25 led to the formation of an alkylidene borane 26 which also exists in two tautomers. Furthermore, the formation of another species in low yields from the complete splitting of a CO fragment and the formation of an intramolecular C≡C triple bond could be observed. VT-NMR and correlation experiments, crystallizations under different atmospheres, vibrational spectroscopy, as well as determination of the reaction pathway by means of DFT calculations, enabled a deep and detailed insight into the underlying processes. The reaction of the dihydrodiborene 22 with acetylene under thermal conditions did not lead to the expected cycloaddition across the B=B double bond but to the insertion of acetylene into it. The obtained product 28 showed a C2 symmetric structure with sp2-hybridized carbon and boron centers along the major axis. A DFT study showed a conjugated π-system which closely resembles the of 1,3,5-hexatriene. Another reaction of 22 with two equivalents of diphenyl disulfide yielded the splitting of the B=B double bond and the formation of a CAAC-stabilized sp3-hybridized monoborane. In two other reactivity studies the diboracumulene could be selectively reacted with carbon dioxide and acetone. The reaction of B2(CAAC)2 with two CO2 molecules led to the formation of a species with a boraketene functionality and a boronic ester group (30). There are no reported examples of the activation of carbon dioxide with apolar multiple bonds, which is why the reaction pathway was investigated by DFT calculations. The reaction proceeds via an unusual successive [2+1] cycloaddition to the coordinatively unsaturated boron atoms with the whole process being strongly exergonic. The reaction of 7 with acetone led to the formation of a five-membered heterocycle with a C=C double bond and an unsymmetrically bridged boron–boron bond with a µ2 hydride orthogonal to the heterocycle. Interestingly, a comparative study from Tobias Brückner with a SIDep-stabilized diboryne and analogous reactions conditions resulted in the 1,2-enol addition product so that the underlying reaction pathway was also investigated. While the 1,2-enol addition product can be described as an intermediate on the way towards 31, moderate energetic barriers and a noticeably exergonic reaction pathway led to a double acetone activation when using the diboracumulene. 31 also showed a mixture of two isomers that could not be interconverted after formation. The reaction of B2(CAAC)2 with (Me2S)CuCl led to a T-shaped coordination of three CuCl fragments to the B2 unit. If treated with one equivalent IMeMe, the diboracumulene showed the formation of the heteroleptic substituted mono base adduct 34. Due to its thermal lability, after 24 hours at elevated temperature the selective formation of a C–H activation product was observed. The same product (35) could be obtained within minutes after addition of a Lewis acid (gallium trichloride) to 34 at room temperature. The addition of another equivalent of IMeMe to 34 led to the formation of the bis(IMeMe) adduct of the diboracumulene 36, which was reminiscent of the bis(CO) adduct 17 and features a strongly elongated B–B bond due to the steric strain in the system. The reaction of 34 towards carbon monoxide resulted in the formation of the heteroleptic base adduct 37. The electron rich boron atom of the boraketene fragment induces strong π-backdonation into the CO ligand, resulting in the lowest observed CO stretch for such a functionality. A final reactivity test of the monobase adduct 34 was carried out with dihydrogen, which led to the spontaneous hydrogenation of both boron atoms and the splitting of the boron–boron bond. The reaction mixture showed two species in a 1:1 ratio: a CAAC-stabilized BH3 fragment 39 and a twofold base-stabilized BH-borylene 38. The splitting of a boron–boron (multiple) bond to access heteroleptic Lewis-base-stabilized borylenes provides a novel approach towards this class of compounds. A large part of this work concerns with the synthesis and reactivity of diborabenzene derivatives. When treating the diboracumulene 7 with acetylene, the formation of a CAAC-stabilized 1,4-diborabenzene could be observed. The planar framework, C–C and B–C bonds within the area of (partial) double bonds, strongly deshielded protons of the central B2C4H4 heterocycle, frontier orbitals that resemble those of benzene as well as negative NICS values represent 42 as a 6π-aromatic system. Due to its tremendously energetically destabilized HOMO, the compound was capable to be used as an electron rich ligand in transition metal chemistry (vide infra). The reactions of B2(CAAC)2 with propyne and 2-butyne led to the formation of 2π-aromatic, paramagnetic compounds with a butterfly shape from the [2+2] cycloaddition to the boron–boron-bond followed by a rearrangement to the thermodynamically more stable 1,3-diboretes. The thermally induced reaction of 40 and 41 with acetylene enabled the formation of the methyl-substituted 1,4-diborabenzene derivatives 43 and 44. To evaluate the properties of the CAAC-stabilized 1,4-diborabenzene 42, the redox properties as well as the potential application as a η6-ligand for transition metals of the chromium triad, were investigated. The reduction of 42 with elemental lithium led to the formation of the two-electron reduction product 45. The formation of a quinoidal system led to an isomeric mixture of cis/trans configured CAAC ligands. Treatment of the compound with 0.5 equivalents of zirconium tetrachloride led to the quantitative formation of 42 and thereby demonstrating the high reduction potential of the dilithiated species. Furthermore, the reaction of 42 with [(MeCN)3M(CO)3] (M = Cr, Mo, W) enabled the synthesis of 18-valence-electron half-sandwich complexes. The coordination of the electron rich heteroarene to the metal tricarbonyl fragments resulted in the lowest ever observed carbonyl stretches for [(η6-arene)M(CO)3] complexes due to the strong electron donation of the ligand to the metal and the resulting backdonation into the antibonding π*-orbitals of the CO ligands. DFT calculations revealed (in contrast to [(η6-C6H6)Cr(CO)3]) significantly higher binding energies between the metal fragment and the 1,4-diborabenzene and together with further spectroscopic and theoretical analyses underline the remarkable ability of 42 to act as an exceedingly electron donating ligand. Ultimately in a reactivity study with the tungsten complex 48, it was possible to obtain the radical monoanion 49, which is the first example of a monoanionic arene metal tricarbonyl complex of group 6 metals. A final topic of this work concerned the synthesis of biradicals from twisted double bonds and the comparison with their diamagnetic congeners, diborenes. The reaction of the diboracumulene with differently substituted disulfides and one diselenide led to the formation of persistent, paramagnetic biradicals through 1,2 additions across the boron–boron multiple bond. While the addition of the reagents to the IDip-stabilized diboryne provided closed-shell, diamagnetic diborenes with a coplanar orientation of the substituents, the addition to the diboracumulene 7 led to the formation of a boron–boron single bond with mutually orthogonal ligands. EPR spectroscopy as well as magnetic measurements of the samples showed a triplet ground state for 51e at room temperature with a strong delocalization of the unpaired electrons into the ligands due to the captodative effect of the π-donor nitrogen atoms and π-acceptor boron atoms. Furthermore, detailed theoretical studies showed that the singlet states of the synthesized diborenes are always more stable than the triplet states and that the triplet states of the paramagnetic compounds 51a,b,e are always more stable than the respective singlet states. All compounds exist in their ground states and therefore represent highly interesting model systems for a deeper understanding of this class of compounds. KW - Bor KW - Mehrfachbindung KW - Reaktivität KW - CAAC KW - Diborakumulen KW - Diborin KW - Diboren KW - Carben Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-163335 ER - TY - INPR A1 - Stoy, Andreas A1 - Böhnke, Julian A1 - Jiménez-Halla, J. Oscar C. A1 - Dewhurst, Rian D. A1 - Thiess, Torsten A1 - Braunschweig, Holger T1 - CO\(_2\) Binding and Splitting by Boron–Boron Multiple Bonds T2 - Angewandte Chemie, International Edition N2 - CO\(_2\) is found to undergo room-temperature, ambient- pressure reactions with two species containing boron-boron multiple bonds, leading to incorporation of either one or two CO\(_2\) molecules. In one case, a thermally-unstable intermediate was structurally characterized, indicating the operation of an initial 2+2 cycloaddition mechanism in the reaction. KW - carbon dioxide KW - CO2 fixation KW - diborenes KW - diborynes KW - boron Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-164265 N1 - This is the pre-peer reviewed version of the following article: A. Stoy, J. Böhnke, J. O. C. Jiménez‐Halla, R. D. Dewhurst, T. Thiess, H. Braunschweig, Angew. Chem. Int.Ed. 2018, 57,5947 –5951, which has been published in final form at DOI: 10.1002/anie.201802117. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. ER - TY - INPR A1 - Arrowsmith, Merle A1 - Mattock, James D. A1 - Böhnke, Julian A1 - Krummenacher, Ivo A1 - Vargas, Alfredo A1 - Braunschweig, Holger T1 - Direct access to a cAAC-supported dihydrodiborene and its dianion T2 - Chemical Communications N2 - The two-fold reduction of (cAAC)BHX\(_2\) (cAAC = 1-(2,6-diisopropylphenyl)-3,3,5,5-tetramethylpyrrolidin-2-ylidene; X = Cl, Br) provides a facile, high-yielding route to the dihydrodiborene (cAAC)\(_2\)B\(_2\)H\(_2\). The (chloro)hydroboryl anion reduction intermediate was successfully isolated using a crown ether. Overreduction of the diborene to its dianion [(cAAC)\(_2\)B\(_2\)H\(_2\)]\(^{2−}\) causes a decrease in the B–B bond order whereas the B–C bond orders increase. KW - carbenes KW - diborenes KW - boron KW - main-group chemistry KW - diborynes Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-164276 N1 - This is the pre-peer reviewed version of the following article: Chemical Communications, 2018, 54, 4669-4672 which has been published at DOI: 10.1039/C8CC01580E ER - TY - JOUR A1 - Böhnke, Julian A1 - Brückner, Tobias A1 - Hermann, Alexander A1 - González-Belman, Oscar F. A1 - Arrowsmith, Merle A1 - Jiménez-Halla, J. Oscar C. A1 - Braunschweig, Holger T1 - Single and double activation of acetone by isolobal B≡N and B≡B triple bonds JF - Chemical Science N2 - B≡N and B≡B triple bonds induce C-H activation of acetone to yield a (2-propenyloxy)aminoborane and an unsymmetrical 1-(2- propenyloxy)-2-hydrodiborene, respectively. DFT calculations showed that, despite their stark electronic differences, both the B≡N and B≡B triple bonds activate acetone via a similar coordination-deprotonation mechansim. In contrast, the reaction of acetone with a cAAC-supported diboracumulene yielded a unique 1,2,3-oxadiborole, which according to DFT calculations also proceeds via an unsymmetrical diborene, followed by intramolecular hydride migration and a second C-H activation of the enolate ligand. KW - acetone KW - diborynes KW - iminoboranes KW - boron KW - small-molecule activation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-164286 VL - 9 ER - TY - INPR A1 - Arrowsmith, Merle A1 - Böhnke, Julian A1 - Braunschweig, Holger A1 - Celik, Mehmet Ali T1 - Reactivity of a Dihydrodiborene with CO: Coordination, Insertion, Cleavage and Spontaneous Cyclic Alkyne Formation T2 - Angewandte Chemie, International Edition N2 - Under a CO atmosphere the dihydrodiborene [(cAAC)HB=BH(cAAC)] underwent coordination of CO concomitant with reversible hydrogen migration from boron to the carbene carbon atom, as well as reversible CO insertion into the B=B bond. Heating of the CO-adduct resulted in two unusual cAAC ring-expansion products, one presenting a B=C bond to a six-membered 1,2-azaborinane-3-ylidene, the other an unprecedented nine-membered cyclic alkyne resulting from reductive cleavage of CO and spontaneous C≡C triple bond formation. KW - CO activation KW - diborene KW - ring expansion KW - insertion KW - cyclic (alkyl)(amino)carbene Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-153318 N1 - This is the pre-peer reviewed version of the following article: Arrowsmith, M., Böhnke, J., Braunschweig, H. and Celik, M., Reactivity of a Dihydrodiborene with CO: Coordination, Insertion, Cleavage and Spontaneous Cyclic Alkyne Formation. Angew. Chem. Int. Ed. 2017, 129,14475 –14480. Accepted Author Manuscript. doi:10.1002/anie.201707907. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. ER - TY - INPR A1 - Böhnke, Julian A1 - Dellermann, Theresa A1 - Celik, Mehmet Ali A1 - Krummenacher, Ivo A1 - Dewhurst, Rian D. A1 - Demeshko, Serhiy A1 - Ewing, William C. A1 - Hammond, Kai A1 - Heß, Merlin A1 - Bill, Eckhard A1 - Welz, Eileen A1 - Röhr, Merle I. S. A1 - Mitric, Roland A1 - Engels, Bernd A1 - Meyer, Franc A1 - Braunschweig, Holger T1 - Isolation of diradical products of twisted double bonds T2 - Nature Communications N2 - Molecules containing multiple bonds between atoms—most often in the form of olefins—are ubiquitous in nature, commerce, and science, and as such have a huge impact on everyday life. Given their prominence, over the last few decades, frequent attempts have been made to perturb the structure and reactivity of multiply-bound species through bending and twisting. However, only modest success has been achieved in the quest to completely twist double bonds in order to homolytically cleave the associated π bond. Here, we present the isolation of double-bond-containing species based on boron, as well as their fully twisted diradical congeners, by the incorporation of attached groups with different electronic properties. The compounds comprise a structurally authenticated set of diamagnetic multiply-bound and diradical singly-bound congeners of the same class of compound. KW - diradicals KW - diborenes KW - carbenes KW - boron Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-160248 N1 - Submitted version of Julian Böhnke, Theresa Dellermann, Mehmet Ali Celik, Ivo Krummenacher, Rian D. Dewhurst, Serhiy Demeshko, William C. Ewing, Kai Hammond, Merlin Heß, Eckhard Bill, Eileen Welz, Merle I. S. Röhr, Roland Mitrić, Bernd Engels, Franc Meyer & Holger Braunschweig: Isolation of diborenes and their 90°-twisted diradical congeners. Nature Communications. Volume 9, Article number: 1197 (2018) doi:10.1038/s41467-018-02998-3 ER - TY - INPR A1 - Arrowsmith, Merle A1 - Böhnke, Julian A1 - Braunschweig, Holger A1 - Celik, Mehmet A1 - Claes, Christina A1 - Ewing, William A1 - Krummenacher, Ivo A1 - Lubitz, Katharina A1 - Schneider, Christoph T1 - Neutral Diboron Analogues of Archetypal Aromatic Species by Spontaneous Cycloaddition N2 - Among the numerous routes organic chemists have developed to synthesize benzene derivatives and heteroaro- matic compounds, transition-metal-catalyzed cycloaddition reactions are the most elegant. In contrast, cycloaddition reactions of heavier alkene and alkyne analogues, though limited in scope, proceed uncatalyzed. In this work we present the first spontaneous cycloaddition reactions of lighter alkene and alkyne analogues. Selective addition of unactivated alkynes to boron–boron multiple bonds under ambient con- ditions yielded diborocarbon equivalents of simple aromatic hydrocarbons, including the first neutral 6p-aromatic dibora- benzene compound, a 2 p-aromatic triplet biradical 1,3-dibor- ete, and a phosphine-stabilized 2 p-homoaromatic 1,3-dihydro- 1,3-diborete. DFT calculations suggest that all three com- pounds are aromatic and show frontier molecular orbitals matching those of the related aromatic hydrocarbons, C6H6 and C4H42+, and homoaromatic C4H5+. KW - Aromaticity KW - Biradicals KW - Boron KW - Cycloaddition KW - Multiple bonds KW - Diborane KW - Cycloaddition Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-142500 ER - TY - INPR A1 - Wang, Sunewang R. A1 - Arrowsmith, Merle A1 - Böhnke, Julian A1 - Braunschweig, Holger A1 - Dellermann, Theresa A1 - Dewhurst, Rian D. A1 - Kelch, Hauke A1 - Krummenacher, Ivo A1 - Mattock, James D. A1 - Müssig, Jonas H. A1 - Thiess, Torsten A1 - Vargas, Alfredo A1 - Zhang, Jiji T1 - Engineering a Small HOMO-LUMO Gap and Intramolecular B–B Hydroarylation by Diborene/Anthracene Orbital Intercalation T2 - Angewandte Chemie, International Edition N2 - The diborene 1 was synthesized by reduction of a mixture of 1,2-di-9-anthryl-1,2-dibromodiborane(4) (6) and trimethylphosphine with potassium graphite. The X-ray structure of 1 shows the two anthryl rings to be parallel and their π(C\(_{14}\)) systems perpendicular to the diborene π(B=B) system. This twisted conformation allows for intercalation of the relatively high-lying π(B=B) orbital and the low-lying π* orbital of the anthryl moiety with no significant conjugation, resulting in a small HOMO-LUMO gap (HLG) and ultimately an unprecedented anthryl B–B bond hydroarylation. The HLG of 1 was estimated to be 1.57 eV from the onset of the long wavelength band in its UV–vis absorption spectrum (THF, λ\(_{onset}\) = 788 nm). The oxidation of 1 with elemental selenium afforded diboraselenirane 8 in quantitative yield. By oxidative abstraction of one phosphine ligand by another equivalent of elemental selenium, the B–B and C\(^1\)–H bonds of 8 were cleaved to give the cyclic 1,9-diboraanthracene 9. KW - boron KW - small HOMO-LUMO gap KW - diborenes KW - borylation KW - hydroarylation Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-148126 N1 - This is the pre-peer reviewed version of the following article: S. R. Wang, M. Arrowsmith, J. Böhnke, H. Braunschweig, T. Dellermann, R. D. Dewhurst, H. Kelch, I. Krummenacher, J. D. Mattock, J. H. Müssig, T. Thiess, A. Vargas, J. Zhang, Angew. Chem. Int. Ed. 2017, 56, 8009., which has been published in final form at DOI: 10.1002/anie.201704063. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. VL - 56 IS - 27 ER -