TY - THES A1 - Claes, Christina T1 - Reduktive Synthese zu neuartigen cyclischen und acyclischen Borverbindungen T1 - Reductive synthesis of novel cyclic and acyclic boron compounds N2 - Ein Teil der hier vorliegenden Arbeit beschäftigte sich mit der Synthese und Charakterisierung neuer Boran-Addukte. Dabei wurden neben den NHCs IMe und IMeMe die Phosphane PEt3 und PMe3 als stabilisierende Lewisbasen eingesetzt. Neben dem Liganden wurde auch der borgebundene organische Rest variiert (Phenyl und n-Butyl), um deren Einfluss auf die Eigenschaften der Addukte zu untersuchen. Die NHC-stabilisierten Monoborane IMe∙B(nBu)Cl2 (99) und IMeMe∙B(Ph)Cl2 (100) konnten in guten Ausbeuten isoliert und vollständig charakterisiert werden. Zusammen mit dem bereits bekannten Addukt IMe∙B(Ph)Cl2 (98) wurden die analytischen Daten dieser drei Spezies miteinander verglichen, wobei sich die strukturellen Parameter im Festkörper stark ähneln. Die vergleichsweise lange B–CCarben-Bindungen (98: 1.621(3) Å; 99: 1.619(5) Å; 100: 1.631(3) Å) konnten hierbei als Beleg für den dativen Charakter dieser Wechselwirkungen herangezogen werden. Auch bei den Phosphan-Boran-Addukten Et3P∙B(Ph)Cl2 (112), Et3P∙B(nBu)Cl2 (113) und Me3P∙B(Ph)Cl2 (114) wurden relativ lange dative B–P-Bindungen (112: 1.987(2) Å; 113: 1.980(2) Å; 114: 1.960(3) Å) gefunden, wobei diese in Me3P∙B(Ph)Cl2 (114) deutlich kürzer ist als bei den PEt3-Addukten 112 und 113. Da die Lewisbasizität von PMe3 geringer ist als von PEt3 konnte dieser Befund auf den geringeren sterischen Anspruch von PMe3 zurückgeführt werden. Die reduktive Umsetzung der Phosphan-Boran-Addukte 112, 113 und 114 mit 1,2-Diphenyl-1,2-dinatriumethan (Na2[C14H12]) verlief in allen Fällen unselektiv und führte nicht zur Bildung eines Phosphan-stabilisierten Borirans. Das gleiche Ergebnis lieferte das NHC-stabilisierte Boran IMe∙B(Dur)Cl2. Im Gegensatz dazu konnten die Addukte 98, 99 und 100 mit NHC-Liganden und kleineren organischen Resten selektiv in die Borirane IMe∙B(Ph)(C14H12) (101), IMe∙B(nBu)(C14H12) (102) und IMeMe∙B(Ph)(C14H12) (103) durch Umsetzung mit Na2[C14H12] überführt werden. Hierbei wurden jene als racemische Gemische erhalten, wobei die Phenylgruppen am C2B-Dreiring ausschließlich trans zueinander orientiert sind. Die sterisch gehinderte Rotation um die B–CCarben-Bindung resultiert in einer Verbreiterung bzw. Aufspaltung der Signale des NHCs im 1H NMR-Spektrum. Die Strukturparameter der Molekülstrukturen im Festkörper von 101, 102 und 103 unterscheiden sich nur geringfügig. Die NHC-stabilisierten Borirane 101, 102 und 103 weisen trotz der enormen Ringspannung eine erstaunlich hohe Stabilität sogar gegenüber Luft und Wasser auf. Während gegenüber [Pt(PCy3)2] keine Reaktivität beobachtet wurde, erfolgte bei Umsetzung von IMe∙B(Ph)(C14H12) (101) mit [Pt(PEt3)3] eine langsame und unvollständige C–H-Bindungsaktivierung am NHC-Rückgrat unter Bildung des Platin(II)-Komplexes 105. Aufgrund der gehinderten Rotation um die B–CCarben-Bindung wurde hierbei ein racemisches Gemisch von jeweils zwei Rotameren erhalten, welche in den NMR-Spektren in Form zweier Signalsätze zu beobachten waren. Die chemische Verschiebung des platingebundenen Hydrid-Signals bestätigt zudem eine vinylartige Natur des Boriran-Liganden mit starkem trans-Effekt. Die Konstitution von 105 im Festkörper konnte durch eine Einkristallröntgenstrukturanalyse belegt werden, wobei die geringe Qualität des Datensatzes keine Strukturdiskussion zulässt. Erwartungsgemäß ging das Boriran IMeMe∙B(Ph)(C14H12) (103) mit [Pt(PEt3)3] keine Reaktion ein, da der IMeMe-Ligand keine C–H-Einheiten im NHC-Rückgrat aufweist. Basenfreie Borirane konnten hingegen weder durch Basenabstraktion aus dem NHC-stabilisierten Boriran 101 mit Hilfe starker Lewissäuren (PPB, B(C6F5)3, AlCl3 oder [Lu∙BCl2][AlCl4]), noch durch Reduktion einfacher Dihalogenborane mit Na2[C14H12] realisiert werden. Während die Umsetzungen mit Lewissäuren entweder mit keiner Reaktion oder mit Zersetzung verbunden waren, bestand eine Schwierigkeit des reduktiven Ansatzes in der Wahl des Lösungsmittels, in welchem das Reduktionsmittel generiert wurde. Die meisten polaren Lösungsmittel führten hierbei direkt zur Zersetzung des Borans und lediglich DME erwies sich als geeignet. Jedoch wurde bei der Umsetzung von DurBCl2 mit Na2[C14H12] in DME kein Boriran, sondern das Borolan 109 mit syndiotaktisch angeordneten Phenylgruppen gebildet. Die Molekülstruktur im Festkörper offenbarte hierbei ein planar-koordiniertes Boratom. Ein weiterer Fokus dieser Arbeit lag auf der Synthese und Reaktivität neuer Phosphan-stabilisierter Diborene. Hierbei konnte zunächst gezeigt werden, dass das sterisch anspruchsvolle Bisphosphan dppe mit ( B(Mes)Br)2 (115) bei Raumtemperatur kein Addukt ausbildet. Bei –40 °C konnten neben freiem dppe auch ein Mono- und ein Bisaddukt im 31P NMR-Spektrum nachgewiesen werden. Im Gegensatz dazu lieferte die Umsetzung von 115 mit dmpe einen nahezu unlöslichen Feststoff, welcher sich in nachfolgenden Reduktionsversuchen als ungeeignet erwiesen hat. Deshalb wurde eine Eintopfsynthese entwickelt, mit der 115 mit KC8 in Gegenwart der jeweiligen Bisphosphane zu den cis-konfigurierten Diborenen (=BMes)2∙dmpe (123), (=BMes)2∙dmpm (126) und (=BMes)2∙dppm (127) umgesetzt werden konnte. Ebenfalls konnte ( B(Mes)Cl)2 (124) selektiv zum Diboren 123 reduziert werden, wobei kein signifikanter Unterschied in Selektivität oder Reaktionszeit beobachtet wurde. Das trans-konfigurierte Diboren (=B(Mes)∙PMe3)2 (122) wurde hingegen durch Reduktion des einfach-stabilisierten Diborans ( B(Mes)Br)2∙PMe3 (119) dargestellt. Anhand der Molekülstrukturen von 122, 123, 126 und 127 im Festkörper konnten die Abstände der B=B-Doppelbindungen (1.55(2)-1.593(2) Å) ermittelt werden. Dabei sind die Boratome nahezu planar von ihren Substituenten umgeben. Durch Analyse der P1–B1–B2-Winkel konnte zudem gezeigt werden, dass das trans-konfigurierte Diboren (=B(Mes)∙PMe3)2 (122) (116.6(3)°) und das cis-konfigurierte Diboren (=BMes)2∙dmpe (123) (118.7(1)°) nahezu ungespannte Spezies darstellen, wohingegen die Fünfring-Systeme (=BMes)2∙dmpm (126) (110.6(2)°) und (=BMes)2∙dppm (127) (110.4(1)°) eine signifikante Ringspannung aufweisen. Mit Hilfe von NMR-Spektroskopie, Cyclovoltammetrie, DFT-Rechnungen und UV-Vis-Spektroskopie konnte der Einfluss der Konfiguration, der Ringgröße und der Lewisbase auf die elektronischen Eigenschaften des Diborensystems untersucht werden. Hierbei wurde bei nahezu allen Parametern eine Tendenz in der Reihenfolge 122, 123, 126 zu 127 beobachtet. 127 nimmt aufgrund der phosphorgebundenen Phenyl-Substituenten eine gesonderte Rolle im Hinblick auf den HOMO-LUMO-Abstand ein, und es wurde für dieses Diboren erstmals eine Reduktionswelle im Cyclovoltammogramm beobachtet. Einige NMR-Signale der Diborene 122, 123, 126 und 127 wurden aufgrund des Spinsystems höherer Ordnung als virtuelle Signale detektiert, bei denen bei geeigneter Auflösung bzw. Signalüberlappung nur die Summe an Kopplungskonstanten ausgewertet werden konnte. Das HOMO ist bei allen Diborenen auf die B–B-Bindung lokalisiert und weist -Charakter auf. Versuche, analoge Diborene mit den Lewisbasen dppe, dppbe, dmpbe, (-PR2)2 (R = p MeOC6H4) oder HP(o-Tol)2 zu realisieren und vollständig zu charakterisieren, schlugen fehl. Lediglich die Diborene (=BMes)2∙dppe (132) und (=BMes)2∙dppbe (133) konnten spektroskopisch nachgewiesen werden. Auch durch reduktive Kupplung von Monoboranen mit chelatisierenden Phosphanen wurde versucht, Diborene darzustellen. Hierzu wurde zunächst die Adduktbildung von Monoboranen und Bisphosphanen untersucht. Während mit dppm kein Addukt nachgewiesen werden konnte, lieferte die Umsetzung von dmpe mit MesBBr2 das Bisaddukt 148. Als Nebenprodukt dieser Reaktion wurde jedoch auch das Boreniumkation 149 beobachtet, welches sich nicht zur reduktiven Kupplung zum Diboren 123 eignet. Auch bei der Umsetzung von MesBCl2 mit dmpe wurde neben dem Bisaddukt 151 eine zu 149 analoge Spezies gebildet. Die nachfolgende Reduktion von 148 mit KC8 in Benzol war mit der Bildung des Diborens (=BMes)2∙dmpe (123) verbunden, welches allerdings nicht isoliert werden konnte. Auch die Variation des Lösungsmittels, des Reduktionsmittels, der Zugabe, des organischen Restes und der Lewisbase ermöglichte keine selektivere Umsetzung bzw. eine Isolierung des Diborens. Im Gegensatz dazu konnte das Diboren 123 durch reduktive Kupplung des Bisadduktes 151 mit KC8 in Benzol dargestellt und isoliert werden. Im Vergleich zur Synthese von 123 durch Reduktion von ( B(Mes)Br)2 (115) benötigt dieser Ansatz jedoch deutlich längere Reaktionszeiten (zwanzig Tage statt einen Tag) und lieferte schlechtere Ausbeuten (31 % statt 54 %). Durch Umsetzung mit Wasser konnte (=B(Mes)∙PMe3)2 (122) selektiv in das Hydrolyseprodukt 154 überführt werden. Dieses Produkt konnte, aufgrund geringer Spuren Wasser im Reaktionsgemisch, ebenfalls durch freeze-pump-thaw Zyklen einer Lösung von 122 erhalten werden. Die Identität von 154 als gemischtes sp2-sp3-Diboran konnte mit Hilfe von NMR-Spektroskopie eindeutig erklärt werden. Zusätzlich konnten zwei weitere mögliche Zersetzungsprodukte durch Einkristallröntgen-strukturanalysen als ( B(Mes)(H)∙PMe3)2 (156) und MesB(OH)2 (155) identifiziert werden. Die Versuche die Liganden der Diborene (=B(Mes)∙PMe3)2 (122) und (=BMes)∙dppm (127) durch Mono- oder Bisphosphane bzw. IMe auszutauschen verlief nur für 122 mit IMe erfolgreich zum Diboren (=B(Mes)∙IMe)2 (49). Auch Cycloadditionsreaktionen unter Beteiligung der B=B-Doppelbindung wurden im Detail untersucht. Es hat sich jedoch gezeigt, dass weder eine [4+2]-Cycloaddition von Isopren (mit 122) oder Cyclopentadien (mit 122 oder 123), noch eine [2+2]-Cycloaddition von Acetylen (mit 127), 2-Butin (mit 123 oder 127), Bis(trimethylsilyl)acetylen (mit 122), Di-tert-butyliminoboran (mit 122), Acetonitril (mit 122), Cyclohexen (mit 122), Aceton (mit 127) oder Methacrolein (mit 123 oder 127), sowie eine [2+1]-Cycloaddition von Kohlenstoffmonoxid (mit 123 oder 127) oder Ethylisonitril (mit 127), noch eine [3+2]-Cycloaddition von Trimethylsilylazid (mit 123 oder 127) möglich ist. Lediglich mit 2-Butin konnte eine selektive Reaktion von (=B(Mes)PMe3)2 (122) zum Phosphan-stabilisierten 1,3-Diboreten 157 herbei geführt werden. Diese ungewöhnliche Reaktion beinhaltet formal die Spaltung der C≡C-Dreifachbindung, wobei als möglicher Reaktionsmechanismus eine [2+2]-Cycloaddition zum 1,2-Diboreten mit nachfolgender Isomerisierung zum 1,3-Derivat 157 postuliert werden konnte. DFT-Rechnungen an 157 zufolge besitzt das HOMO  artigen Charakter und ist über die beiden Boratome und die CMe-Einheit delokalisiert. Demnach konnte 157 als homoaromatisches System mit zwei  Elektronen identifiziert werden, was durch die negativen NICS-Werte (NICS(0) = –20.62; NICS(1) = –6.27; NICS(1)` = –14.59) und den unterschiedlich langen B–C-Bindungen des Vierrings in der Molekülstruktur im Festkörper (B–C1: 1.465(4) bzw. 1.486(4) Å; B–C3: 1.666(4) bzw. 1.630(4) Å) weiter bestätigt wurde. Eine Einkristallröntgen-strukturanalyse belegte zudem eine Butterfly-Struktur des 1,3-Diboretens 157 mit einem Kippwinkel  = 34.4°. Die Bindung zwischen Phosphoratom und dem Kohlenstoffatom im Vierring liegt mit 1.759(2) Å im Bereich einer dativen Bindung. Durch Basenabstraktion mit PPB konnte das stabilisierte Diboreten 157 in das basenfreie 1,3-Diboreten 164 überführt werden, welches jedoch nicht isoliert werden konnte. Die NMR-spektroskopischen Parameter von 164 belegen hingegen eindeutig dessen Natur. Neben Cycloadditionsreaktionen wurde auch das Redoxverhalten des Diborens (=BMes)2∙dppm (127) untersucht. So verlief die Umsetzung von 127 mit Iod hochselektiv zu einer in Lösung vermutlich diamagnetischen Spezies (NMR-aktiv/ESR-inaktiv). Durch Bestimmung der Molekülstruktur im Festkörper stellte sich jedoch heraus, dass diese Umsetzung zu einer Oxidation der elektronenreichen B=B-Doppelbindung unter Bildung des Radikalkations 166 führte (B–B: 1.633(3) Å). Somit wurde eine signifikante Diskrepanz zwischen kristallographischen und spektroskopischen Befunden beobachtet, weshalb die Natur des Reaktionsproduktes in Lösung nicht eindeutig ermittelt werden konnte. Aus diesem Grund wurde (=BMes)2∙dppm (127) auch mit dem Einelektronenoxidationsmittel [Cp2Fe][PF6] umgesetzt und ESR-spektroskopisch analysiert. Hierbei konnte im ESR-Spektrum das typische 1:2:1-Triplett bei giso = 2.0023 mit A(31P) = 21 G (58 MHz) für ein derartiges Radikalkation detektiert werden. Die Reduktion von 127 mit Lithium und Natriumnaphthalid lieferte entweder keinen Umsatz (Lithium) oder eine unselektive Zersetzung des Diborens (Natriumnaphthalid). Die Umsetzung mit KC8 verlief jedoch äußerst selektiv zu einer neuen borhaltigen Spezies (11B:  = 22.4 ppm; 31P:  = 18.6 ppm), welche sich in Anwesenheit des Reduktionsmittels jedoch als nicht stabil erwies und somit nicht isoliert werden konnte. Auch der Versuch durch einen Kationenaustausch mit Li[BArCl4] ein stabileres Produkt zu erhalten schlug fehl. Im Gegensatz dazu führte die Umsetzung der Diborene (=B(Mes)∙PMe3)2 (122) und (=BMes)2∙dppm (127) mit Cu(I)Cl zur Bildung der Kupferkomplexe 167 und 168, deren Molekülstrukturen im Festkörper vergleichbar zu dem analogen NHC-stabilisierten Kupferkomplex 63 sind (B–B: 1.626(3) Å (167); 1.628(3) Å (168); 1.633(4) Å (63)). Beide Spezies zeigen hierbei erwartungsgemäß ein interessantes photophysikalisches Verhalten, wobei dieses lösungsmittelunabhängig ist und Fluoreszenzprozesse für die Emission verantwortlich sind. Durch analoge Umsetzung von 127 mit Ag(I)Cl konnte der entsprechende Silberkomplex 169 generiert und NMR-spektroskopisch nachgewiesen werden (11B:  = 26.7 ppm; 31P:  = 5.4 ppm). 169 erwies sich jedoch als nicht stabil und zersetzte sich im Verlauf der Aufarbeitung zu der bekannten tetranukleare Silberverbindung 170. Im Rahmen der Reaktivitätsstudien wurden die Diborene 122, 123 und 127 auch noch mit einer Reihe weiterer Reagenzien wie Catecholboran (mit 122 oder 127), THF∙BH3 (mit 127), Brom (mit 127), Iodchlorid (mit 123), ZnCl2 (mit 127), GaCl3 (mit 127), Na[BArF4] (mit 122), ( SPh)2 (mit 127), HCl (127), Wasserstoff (mit 122), Natriumhydrid (mit 127) und Methanol (mit 127) versetzt. Hierbei konnte entweder keine Reaktion oder Zersetzung beobachtet werden. Lediglich bei der Umsetzung von 127 mit Methanol konnte das Zersetzungsprodukt Mesityldimethoxyboran (171) eindeutig charakterisiert werden. N2 - One part of the present thesis focused on the synthesis and characterization of novel Lewis base borane adducts. In addition to NHCs (IMe, IMeMe), the monophosphines PEt3 and PMe3 were used as the stabilizing Lewis base. However, not only the Lewis base was varied, but also the boron-bound organic substituent (phenyl, n-butyl) in order to evaluate its influence on the electronic structure of the adducts. Thus, the NHC-stabilized boranes IMe∙B(nBu)Cl2 (99) und IMeMe∙B(Ph)Cl2 (100) were isolated in good yields and could be fully characterized. Including the known adduct IMe∙B(Ph)Cl2 (98), a reasonable comparison of the analytical data of the three adducts became feasible. While the structural parameters of 98, 99 and 100 in the solid state strongly resemble each other, rather long B Ccarbene bonds (98: 1.621(3) Å; 99: 1.619(5) Å; 100: 1.631(3) Å) illustrated the dative character of these interactions. Similarly, the phosphine borane adducts Et3P∙B(Ph)Cl2 (112), Et3P∙B(nBu)Cl2 (113), and Me3P∙B(Ph)Cl2 (114) showed quite long dative B–P bonds (112: 1.987(2) Å; 113: 1.980(2) Å; 114: 1.960(3) Å), which is however significantly shorter in Me3P∙B(Ph)Cl2 (114) as those of the PEt3 adducts 112 and 113. Since the lewis basicity of PMe3 is lower than that of PEt3, this finding is presumably associated with the smaller sterical demand of the PMe3 ligand. Attempts to reduce the phosphine borane adducts 112, 113 and 114 by Na2[C14H12] consistently proceeded with low selectivities and did not result in the generation of borirane species. The same result was obtained for the reduction of the NHC-stabilized borane IMe∙B(Dur)Cl2. By contrast, the adducts 98, 99 and 100 featuring NHC ligands in combination with smaller organic moieties were successfully converted selectively into the boriranes IMe∙B(Ph)(C14H12) (101), IMe∙B(nBu)(C14H12) (102) and IMeMe∙B(Ph)(C14H12) (103) by reaction with Na2[C14H12]. Here, the boriranes were isolated as racemic mixtures with trans-configured phenyl groups at the C2B rings. Due to hindered rotation at the B Ccarbene-bond, the signals of the NHC in the 1H NMR-spectrum broadened and split, respectively. The molecular structures of 101, 102 and 103 in the solid state were also determined by X-ray diffraction, and were shown to differ only marginally. Despite the presence of significant molecular ring strain, the NHC-stabilized boriranes 101, 102 and 103 are surprisingly stable towards air and moisture. While no reaction was observed with [Pt(PCy3)2], treatment of IMe∙B(Ph)(C14H12) (101) with [Pt(PEt3)3] resulted in a slow and incomplete C–H bond activation process at the NHC backbone to afford the platinum(II) complex 105. Due to hindered rotation towards the B–Ccarbene bond, a racemic mixture of two rotameres was observed, which showed two sets of signals in the NMR spectra. In the 1H NMR spectrum the chemical shift of the platinum-bound hydride of 105 further confirmed the vinyl-like nature of the borirane ligand featuring a trans-effect. The identity of 105 was also substantiated in the solid state X-ray diffraction, while the poor quality of the crystallographic data prevented any discussion of the structural parameters. As expected, IMeMe∙B(Ph)(C14H12) (103) did not react with [Pt(PEt3)3], because of the lack of C–H-moieties within the NHC backbone. By contrast, the realization of base-free boriranes either by Lewis base abstraction reactions from the NHC-stabilized borirane 101 using strong Lewis acids (PPB, B(C6F5)3, AlCl3, [Lu∙BCl2][AlCl4]) or by direct reduction of free dihaloboranes with Na2[C14H12] was not successful. While the reactions with Lewis acids either suffered any visible conversion or showed complete decomposition of the borirane precursors, the reductive approach was hampered by the choice of an adequate reaction medium in which the reductant can be generated. Thus, most of the suitable polar solvents reacted with the free boranes themselves, and only DME appeared to be practical. However, reaction of DurBCl2 with Na2[C14H12] in DME did not afford a borirane species. Instead, borolane 109 with syndiotactically-arranged phenyl groups was formed, which was fully characterized in solution, and in the solid state. Thereby a trigonal-planar boron atom was observed. Another main part of the present thesis dealt with the synthesis and reactivity of phosphine-stabilized diborenes. Initially, it was demonstrated that the sterically demanding diphosphine dppe does not form an adduct with ( B(Mes)Br)2 (115) at room temperature, while at –40 °C dppe, a mono- and a bisadduct were evident in the 31P NMR spectrum. By contrast, reaction of 115 with dmpe provided an almost insoluble solid, which however, proved unsuitable in subsequent reduction experiments. Consequently, a simple one-pot protocol was developed, which enabled the isolation of the cis-configured diborenes (=BMes)2∙dmpe (123), (=BMes)2∙dmpm (126) and (=BMes)2∙dppm (127) by reduction of 115 with KC8 in the presence of the respective diphosphines. Also ( B(Mes)Cl)2 (124) could be reduced selectively to diborene 123, whereat no significant difference was observed in the selectivity or the reaction time. The related trans-configured diborene (=B(Mes)∙PMe3)2 (122) was realized by reduction of the mono-stabilized diborane ( B(Mes)Br)2∙PMe3 (119) with KC8 in the presence of an excess PMe3. Analysis of the structural parameters of 122, 123, 126 and 127 in the solid state revealed typical B–B distances (1.55(2)-1.593(2) Å) for B=B double bond systems. Thereby all boron atoms are effectively planar. In addition, large P1–B1–B2 bond angles for the trans-configured diborene 122 (116.6(3)°) and the cis-configured diborene 123 (118.7(1)°) suggested rather unstrained species, while the five membered ring systems 126 (110.6(2)°) and 127 (110.4(1)°) feature significant ring strain. The influence of the configuration, the ring size, and the Lewis base on the electronic properties of the diborene systems was further evaluated in detail by NMR spectroscopy, cyclic voltammetry, DFT calculations, and UV-visible spectroscopy. Here, a tendency was observed in the sequence 122, 123, 126 to 127 for all parameters. Thereby 127 is an exceptional compound, due to the phosphorous-bound phenyl moieties, in regard to the HOMO-LUMO gap and the first reduction wave was observed for this diborene in a cyclic voltammogram. Some NMR signals of the diborenes 122, 123, 126 and 127 were detected as virtual signals as a result of the spin systems. Here, only the sum of the coupling constant can be determined by a suitable resolution of the signals. The HOMO of all diborenes is located on the B–B-bond and possesses  character. All attempts to prepare and fully characterize analogous diborenes featuring the Lewis bases dppe, dppbe, dmpbe, ( PR2)2 (R = p-MeOC6H4), and HP(o-Tol)2 failed so far, and only the diborenes (=BMes)2∙dppe (132) and (=BMes)2∙dppbe (133) could be generated and identified spectroscopically in solution. Subsequently, we studied an alternative approach to realize diborenes by reductive coupling of monoboranes with chelating phosphine ligands. Initially, we focused on the adduct formation process between monoboranes and diphosphines. While no adduct was formed with dppm, reaction of MesBBr2 with dmpe afforded the bisadduct 148. However, the borenium cation 149 was observed as a side product of this transformation, which itself has proven unsuitable for the reductive coupling to yield diborene 123. Similarly, reaction of MesBCl2 with dmpe afforded a related cationic species in addition to the bisadduct 151. Subsequent reduction of 148 with KC8 in benzene led to the formation of (=BMes)2∙dmpe (123), which however, could not be isolated by this route. Variation of the solvent, the reductant, the order of addition, the organic moiety, and the Lewis base exerted no influence on the selectivity of the reduction process or the possibility of isolation of the diborene. Only reduction of 151 with KC8 in benzene facilitated the isolation of pure (=BMes)2∙dmpe (123). However, the reductive coupling approach required significantly longer reaction times (twenty days) and provided significantly lower yields (31 %) than the synthesis of 123 by reduction of ( B(Mes)Br)2 (one day; 54%). Reaction of (=B(Mes)∙PMe3)2 (122) with water selectively afforded the hydrolysis product 154, which had already been observed after a few freeze-pump-thaw cycles, due to the presence of trace amounts of water in the reaction mixture. The nature of 154 as mixed sp2-sp3 diborane was clearly verified by NMR spectroscopy. Two other possible decomposition products were also identified by X-ray diffraction as ( B(Mes)(H)∙PMe3)2 (156) and MesB(OH)2 (155). Experiments of ligand exchange of (=B(Mes)∙PMe3)2 (122) and (=BMes)∙dppm (127) with mono-, diphosphines or IMe are only successful for 122 with IMe to the diborene (=B(Mes)∙IMe)2 (49). Subsequently, cycloaddition reactions involving the B=B double bond system were studied in detail. Here, we could show that neither [4+2]-cycloaddition with isoprene (122) or cyclopentadiene (122/123), [2+2]-cycloaddition with acetylene (127), 2-butyne (123/127), bis(trimethylsilyl)acetylene (122), di-tert-butyliminoborane (122), acetonitrile (122), cyclohexene (122), acetone (127), or methacrolein (123/127), [2+1]-cycloaddition with CO (123/127) or ethylisonitrile (127), nor [3+2]-cycloaddition reactions with trimethylsilylazide (123/127) are feasible. Only 2-butyne showed a selective reaction when treated with (=B(Mes)∙PMe3)2 (122) to afford the phosphine-stabilized 1,3-diboretene 157. This uncommon transformation formally involves cleavage of the C≡C-triple bond. A plausible mechanism combines the initial formation of the 1,2 diboretene and subsequent isomerisation to the more stable 1,3 diboretene derivative 157. According to DFT calculations, 157 possesses a -type HOMO, which is delocalized over the two boron atoms and the CMe moiety. Consequently, 157 features a homoaromatic system with two -electrons, which was verified by its negative NICS values (NICS(0) = –20.62; NICS(1) = –6.27; NICS(1)` = –14.59) and the differences in the B–C-bond lengths in the molecular structure in the solid state (B–C1: 1.465(4), 1.486(4) Å; B–C3: 1.666(4), 1.630(4) Å). Furthermore, an X-ray diffraction study on 157 revealed a butterfly structure with a tilt angle  of 34.4°. The bond between the phosphorous and the carbon atom in the ring possesses dative character (1.759(2) Å). Subsequent reaction of 157 with PPB enabled the generation of the base-free 1,3-diboretene 164, which could not be isolated. However, the NMR spectroscopic parameters of 164 clearly verified its base-free nature. In addition to cycloaddition reactions, we also studied the redox properties of (=BMes)2∙dppm (127). Thus, reaction of 127 with iodine proceeded highly selective to presumably afford a diamagnetic species in solution (NMR-active/EPR-inactive). However, determination of the molecular structure showed the presence of the radical cation 166 (B–B: 1.633(3) Å), which has been formed by one-electron oxidation of the B=B double bond of 127. Thus, we observed a significant discrepancy between the spectroscopic and the crystallographic results, for which reason the nature of the primary reaction product in solution remains unknown so far. Accordingly, 127 was also oxidized selectively by reaction with the one-electron oxidant [Cp2Fe][PF6], while the reaction mixture was characterized by EPR spectroscopy. Here, a typical 1:2:1 triplet at giso = 2.0023 with A(31P) = 21 G (58 MHz) was found in the EPR spectrum, which strongly suggested the generation of a radical cationic species (172). Reduction of 127 by lithium or sodium naphthalenide did not afford either a reaction (lithium) or an unselective decomposition of the diborene (sodium naphthalenide). Thus, reduction with KC8 initially indicated a selective transformation to afford a new boron-containing species (11B:  = 22.4 ppm; 31P:  = 18.6 ppm), which however, readily decomposed during work-up in the absence of the reductant. Also the attempt to stabilize the reduction product by exchange of the cation with Li[BArCl4] was not successful. By contrast, reaction of (=B(Mes)∙PMe3)2 (122) and (=BMes)2∙dppm (127) with Cu(I)Cl led to the formation of the copper complexes 167 and 168, respectively, which feature solid state structures comparable to that of the analogous NHC-stabilized copper diborene complex 63 (B–B: 1.626(3) Å (167); 1.628(3) Å (168); 1.633(4) Å (63)). As expected, both species exhibit interesting photophysical properties, which caused by fluorescence processes. The photophysical data of both complexes are independent from the solvent and the emission is a result of fluorescent processes. The analogous silver complex 169 could also be generated by reaction of 127 with Ag(I)Cl and identified spectroscopically in solution (11B:  = 26.7 ppm; 31P:  = 5.4 ppm). However, all attempts to isolate this species failed, and 169 consistently decomposed during work-up to afford the known tetranuclear silver complex 170. As part of the reactivity studies, diborenes 122, 123 and 127 were also reacted with numerous other reagents such as catecholborane (122/127), THF∙BH3 (127), bromine (127), iodine monochloride (123), ZnCl2 (127), GaCl3 (127), Na[BArF4] (122), ( SPh)2 (127), hydrogen (122), HCl (127), NaH (127) and MeOH (127). However, either no reaction or decomposition of the diborenes was noticed. Only for the reaction of 127 with MeOH the decomposition product MesB(OMe)2 (171) could be assigned. KW - Bor KW - Lewis-Addukt KW - Reduktion KW - Phosphane KW - NHCs KW - Homoaromatisches System KW - Diborene KW - Borirane Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-135558 ER - TY - THES A1 - Schäfer, Marius T1 - Darstellung und Reaktivität von Iminoboranen sowie deren Einsatz bei der Synthese von Azaborininen T1 - Synthesis and Reactivity of Iminoboranes and their Usage in the Synthesis of Azaborinines N2 - Die Dissertation befasst sich mit der Darstellung von Iminoboranen sowie deren Verwendung bei der Rhodium-vermittelten Synthese von Azaborininen. N2 - The first examples of adducts of cyclic alkyl(amino) carbenes (cAACs) and N-heterocyclic carbenes (NHCs) with iminoboranes have been synthesized and fully characterized. Furthermore new synthetic route to functionalized 1,2 and 1,4-azaborinines has been developed utilizing a [2+2]/[2+4] cycloaddition reaction of di-tert-butyliminoborane and the unsymmetric (tert-butylimino)mesityborane with a series of alkynes in presence of the rhodium complex [{RhCl(PiPr3)2}]2. KW - Iminoborane KW - Azaborinine Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136959 ER - TY - JOUR A1 - Arrowsmith, Merle A1 - Böhnke, Julian A1 - Braunschweig, Holger A1 - Celik, Mehmet A1 - Dellermann, Theresa A1 - Hammond, Kai T1 - Uncatalyzed Hydrogenation of First-Row Main Group Multiple Bonds JF - Chemistry, A European Journal N2 - Room temperature hydrogenation of an SIDep-stabilized diboryne (SIDep = 1,3-bis(diethylphenyl)-4,5-dihydroimidazol-2-ylidene) and a CAAC-supported diboracumulene (CAAC = 1-(2,6- diisopropylphenyl)-3,3,5,5-tetramethylpyrrolidin-2-ylidene) provided the first selective route to the corresponding 1,2-dihydrodiborenes. DFT calculations showed an overall exothermic (ΔG = 19.4 kcal mol\(^{-1}\) two-step asynchronous H\(_2\) addition mechanism proceeding via a bridging hydride. KW - diborenes KW - carbenes KW - hydrogenation KW - main-group chemistry KW - reaction mechanism KW - Diborane Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-139364 N1 - This is the peer reviewed version of the following article: Chemistry, A European Journal, 2016, 22, 17169–17172, which has been published in final form at 10.1002/chem.201604094. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. VL - 22 IS - 48 SP - 17169 EP - 17172 ER - TY - THES A1 - Macha, Bret B. T1 - Boron-Containing Aromatics as Communicating and Communicative Units in π-Conjugated Systems T1 - Borhaltige Aromaten als Kommunikations-vermittelnde Einheiten in π-konjugierten Systemen N2 - Project Borylene A new borylene ligand ({BN(SiMe\(_3\))(t-Bu)}) has been successfully synthesized bound in a terminal manner to base metal scaffolds of the type [M(CO)\(_5\)] (M = Cr, Mo, and W), yielding complexes [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), [(OC)\(_5\)Mo{BN(SiMe\(_3\))(t- Bu)}] (20), and [(OC)\(_5\)W{BN(SiMe\(_3\))(t-Bu)}] (21) (Figure 5-1). Synthesis of complexes 19, 20, and 21 was accomplished by double salt elimination reactions of Na\(_2\)[M(CO)\(_5\)] (M = Cr (11), Mo (1), and W (12)) with the dihaloborane Br\(_2\)BN(SiMe\(_3\))(t-Bu) (18). This new “first generation” unsymmetrical borylene ligand is closely akin to the bis(trimethylsilyl)aminoborylene ligand and has been shown to display similar structural characteristics and reactivity. The unsymmetrical borylene ligand {BN((SiMe\(_3\))(t-Bu)} does display some individual characteristics of note and has experimentally been shown to undergo photolytic transfer to transition metal scaffolds in a more rapid manner, and appears to be a more reactive borylene ligand, than the previously published symmetrical {BN(SiMe\(_3\))\(_2\)} ligand, based on NMR and IR spectroscopic evidence. Photolytic transfer reactions with this new borylene ligand ({BN((SiMe\(_3\))(t-Bu)}) were conducted with other metal scaffolds, resulting in either complete borylene transfer or partial transfer to form bridging borylene ligand interactions between the two transition metals. The unsymmetrical ligand’s coordination to early transition metals (up to Group 6) indicates a preference for a terminal coordination motif while bound to these highly Lewis acidic species. The ligand appears to form more energetically stable bridging coordination modes when bound to transition metals with high Lewis basicity (beyond Group 9) and has been witnessed to transfer to transition metal scaffolds in a terminal manner and subsequently rearrange in order to achieve a more energetically stable bridging final state. Figure 5-2 lists the four different transfer reactions conducted between the chromium borylene species [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) and the transition metal complexes [(η\(^5\)-C\(_5\)H\(_5\))V(CO)\(_4\)] (51), [(η\(^5\)-C\(_5\)Me\(_5\))Ir(CO)\(_2\)] (56), [(η\(^5\)-C\(_5\)H\(_4\)Me)Co(CO)\(_2\)] (59), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\){μ-(CO)\(_2\)}] (53). These reactions successfully yielded the new “second generation” borylene complexes [(η\(^5\)-C\(_5\)H\(_5\))(OC)\(_3\)V{BN(SiMe\(_3\))(t-Bu)}] (55), [(η\(^5\)-C\(_5\)Me\(_5\))Ir{BN(SiMe\(_3\))(t-Bu)}\(_2\)] (58), [{(η\(^5\)-C\(_5\)H\(_4\)Me)Co}\(_2\)(μ-CO)\(_2\){μ- BN(SiMe\(_3\))(t-Bu)}] (61), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\)(μ-CO){μ-BN(SiMe\(_3\))(t-Bu)}] (62), respectively. Analysis of the accumulated data for all of the terminal borylene species discussed in this section, particularly bond distances, infrared spectroscopy, and \(^{11}\)B{\(^1\)H} NMR spectroscopic data, has been performed, and a trend in the data has led to the following conclusions: [1] NMR spectroscopic data for the \(^{11}\)B{\(^1\)H} boron and \(^{13}\)C{\(^1\)H} carbonyl environments of the first generation borylene species ([(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21))) all show progressive up-field shifting as the Group 6 metal becomes heavier (Cr (19) to Mo (20) to W (21)), indicating maximum deshielding for these nuclei in the [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) complex. [2] The boron-metal-trans-carbon (B-M-C\(_{trans}\)) axes of the first generation borylene complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Mo (20), and W (21)) are not completely linear, preventing direct IR spectroscopic comparison. The chromium analog [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), however, is essentially linear and displays the expected three carbonyl IR stretching frequencies, all at higher energy than those of the chromium bis(trimethylsilyl)aminoborylene complex [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13), indicating that the ({BN(SiMe\(_3\))(t-Bu)}) ligand is either a stronger σ-donor or a poorer π-acceptor compared to the chromium metal center. [3] In transfer reactions, the {BN(SiMe\(_3\))(t-Bu)} fragment appears to be more stable as a terminal ligand when bound to more Lewis acidic first row transition metals and appears to prefer coordination in a bridging motif when coordinated to more Lewis basic first row transition metals. Project Borirene The synthesis of the first platinum bis(borirene) complexes are presented along with findings from structural and electronic examination of the role of platinum in allowing increased coplanarity and conjugation of twin borirene systems. This series of trans-platinum-linked bis(borirene) complexes (119/120, 122/123, and 125/126) all show coplanarity in the twin ring systems and stand as the first verified structural representations of two coplanar borirene systems across a linking unit. The role of a platinum atom in mediating communication between chromophoric ligands can be generalized by an expected bathochromic (red) shift in the absorption spectrum due to an increase in the electronic delocalization between the formerly independent aromatic systems when compared to the platinum mono-σ-borirenyl systems. The trans-platinum bis(borirene) scaffold serves as a simplified monomeric system that allows not only study of the effects of transition metals in mitigating electronic conjugation, but also the tunability of the overall photophysical profile of the system by exocyclic augmentation of the three-membered aromatic ring. A series of trans-platinum bis(alkynyl) complexes were prepared (Figure 5-3) to serve as stable platforms to transfer terminal borylene ligands {BN(SiMe\(_3\))\(_2\)} onto 95, 102, 106, and 63. Mixing of cis-[PtCl\(_2\)(PEt\(_3\))\(_2\)] (93) with two equivalents of corresponding alkynes in diethylamine solutions successfully yielded trans-[Pt(C≡C-Ph)\(_2\)(PEt\(_3\))\(_2\)] (95), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)OMe)\(_2\)(PEt\(_3\))\(_2\)] (102), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)CF\(_3\))\(_2\)(PEt\(_3\))\(_2\)](106), and trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) through salt elimination reactions. Three of the trans-platinum bis(alkynyl) complexes (95, 102, and 106) successfully yielded trans-platinum bis(borirenyl) complexes 119/120, 122/123, and 125/126 through photolytic transfer of two equivalents of the terminal borylene ligand {BN(SiMe\(_3\))\(_2\)} from [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) (Figure 5-4). Attempted borylene transfer reactions to the trans-platinum bis(alkynyl) complex trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) failed due to the complex’s photoinstability. Although a host of other variants of platinum alkynyl species were prepared and attempted, these three were the only ones that successfully yielded trans-platinum bis(borirenyl) units. Attempts were also made to create a cis variant for direct UV-vis comparison to the trans-platinum bis(borirenyl) variants, however, these attempts were also not successful. Gladysz-type platinum end-capped alkynyl species were also synthesized to serve as transfer platforms for borirene synthesis in sequential order, however, these species were also shown to not be photolytically stable. A host of new monoborirenes: Ph-(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph (148), trans- [PtCl{(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph}(PEt\(_3\))\(_2\)] (149), and [(η\(^5\)-C\(_5\)Me\(_5\))(OC)\(_2\)Fe(μ- {BN(SiMe\(_3\))(t-Bu)}C=C)Ph] (150) were synthesized by photo- and thermolytic transfer of the unsymmetrical {BN(SiMe\(_3\))(t-Bu)} ligand from the complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21)) to organic and organometallic alkynyl species to verify that the borylene complexes all display similar reactivity to the symmetrical terminal borylenes of the type [(OC)\(_5\)M{BN(SiMe\(_3\))\(_2\)}] (M = Cr (13), Mo (14), and W (15)). These monoborirenes are all found to be oils when in their pure states and X-ray structural determination was impossible for these species. Project Boratabenzene The bis(boratabenzene) complex [{(η\(^5\)-C\(_5\)H\(_5\))Co}\(_2\){μ:η\(^6\),η\(^6\)-(BC\(_5\)H\(_5\))\(_2\)}] (189) was successfully prepared by treatment of tetrabromodiborane (65) with six equivalents of cobaltocene (176) in a unique reaction that utilized cobaltocene as both a reagent and reductant (Figure 5-5). The bimetallic transition metal complex features a new bridging bis(boratabenzene) ligand linked through a boron-boron single bond that can manifest delocalization of electron density by providing an accessible LUMO orbital for π-communication between the cobalt centers and heteroaromatic rings. This dianionic diboron ligand was shown to facilitate electronic coupling between the cobalt metal sites, as evidenced by the potential separations between successive single-electron redox events in the cyclic voltammogram. Four formal redox potentials for complex 189 were found: E\(_{1/2}\)(1) = −0.84 V, E\(_{1/2}\)(2) = −0.94 V, E\(_{1/2}\)(3) = −2.09 V, and E\(_{1/2}\)(4) = −2.36 V (relative to the Fc/Fc+ couple) (Figure 5-6). These potentials correlate to two closely-spaced oxidation waves and two well-resolved reduction waves ([(189)]\(^{0/+1}\), [(189)]\(^{+1/+2}\), [(189)]\(^{0/–1}\), and [(189)]\(^{–1/–2}\) redox couples, respectively). The extent of metal-metal communication was found to be relative to the charge of the metal atoms, with the negative charge being more efficiently delocalized across the bis(boratabenzene) unit (class II Robin-Day system). Magnetic studies indicate that the Co(II) ions are weakly antiferromagnetically coupled across the B-B bridge. While reduction of the bis(boratabenzene) system resulted in decomposition of the complex, oxidation of the system by one- and two-electron steps resulted in isolable stable monocationic (194) and dicationic (195) forms of the bis(boratabenzene) complex (Figure 5-7). Study of these systems verified the results of the cyclic voltammetry studies performed on the neutral species. These species are unfortunately not stable in acetonitrile or nitromethane solutions, which until this point are the only solvents that have been observed to dissolve the cationic species. Unfortunately, this instability in solution complicates reactivity studies of these cationic complexes. Finally, reactivity studies were performed on the neutral bis(boratabenzene) complex 189 in which the compound was tested for: (A) cleavage of the boratabenzene (cyclo-BC\(_5\)H\(_5\)) ring from the cobalt center, and (B) oxidative addition of the B-B bond to a transition metal scaffold to attempt synthesis of the first ever L\(_x\)M-η\(^1\)-(BC\(_5\)H\(_5\)) complex. Both of these reactivity studies, however, proved unsuccessful and typically witnessed decomposition of the bis(boratabenzene) complex or no reactivity. After repeated attempts of these reactions, no oxidative addition of the bis(boratabenzene) system could be confirmed. N2 - Projekt: Borylene Ein neuer Borylen-Ligand ({BN(SiMe\(_3\))(t-Bu)}) konnte dargestellt werden, der terminal an Metallfragmente der Form [M(CO)\(_5\)] (M = Cr, Mo, und W) bindet. Die Komplexe [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), [(OC)\(_5\)Mo{BN(SiMe\(_3\))(t- Bu)}] (20), und [(OC)\(_5\)W{BN(SiMe\(_3\))(t-Bu)}] (21) konnten durch doppelte Salzeliminierung von Na\(_2\)[M(CO)\(_5\)] (M = Cr (11), Mo (1), und W (12)) mit dem Dihalogenboran Br\(_2\)BN(SiMe\(_3\))(t-Bu) (18) erfolgreich dargestellt werden (Abbildung 6-1). Der neue, unsymmetrische Borylen-Ligand der “ersten Generation” ist eng verwandt mit dem Bis(trimethylsilyl)aminoborylen-Liganden, zu dem er, wie gezeigt werden konnte, ähnliche Strukturmerkmale und Reaktivitäten aufweist. Der unsymmetrische Borylen-Ligand {BN((SiMe\(_3\))(t-Bu)} zeigt jedoch auch einige Besonderheiten. So verläuft der photolytische Transfer auf Übergangsmetallfragmente im Vergleich zum symmetrischen {BN(SiMe\(_3\))\(_2\)}-Liganden schneller, was ihn auf der Grundlage von NMR- und IR-spektroskopischen Daten zu einem reaktiveren Borylen macht. Photolytische Transferreaktionen des neuen Borylens ({BN((SiMe\(_3\))(t-Bu)}) mit verschiedenen Metallkomplexen verlaufen entweder unter vollständigem oder teilweisem Transfer zu verbrückenden Borylen-Komplexen. Im Falle von Lewis-aciden, frühen Übergangsmetallkomplexen (bis zur Gruppe 6) wird eine terminale Koordination bevorzugt. Bei Lewis-basischen Übergangsmetallen (jenseits der Gruppe 9) hingegen scheint der verbrückende Koordinationsmodus energetisch bevorzugt zu sein. Es wurde beobachtet, dass bei Transferreaktionen anfänglich terminale Borylen-Komplexe gebildet werden, die sich in Komplexe mit verbrückenden Borylen-Liganden umlagern. Abbildung 6-2 gibt eine Übersicht über die durchgeführten Transferreaktionen zwischen der Chromborylen-Spezies [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) und den Übergangsmetallkomplexen [(η\(^5\)-C\(_5\)H\(_5\))V(CO)\(_4\)] (51), [(η\(^5\)-C\(_5\)Me\(_5\))Ir(CO)\(_2\)] (56), [(η\(^5\)-C\(_5\)H\(_4\)Me)Co(CO)\(_2\)] (59), und [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\){μ-(CO)\(_2\)}] (53). Bei diesen Umsetzungen konnten die Borylen-Komplexe der “zweiten Generation” [(η\(^5\)-C\(_5\)H\(_5\))(OC)\(_3\)V{BN(SiMe\(_3\))(t-Bu)}] (55), [(η\(^5\)-C\(_5\)Me\(_5\))Ir{BN(SiMe\(_3\))(t-Bu)}\(_2\)] (58), [{(η\(^5\)-C\(_5\)H\(_4\)Me)Co}\(_2\)(μ-CO)\(_2\){μ- BN(SiMe\(_3\))(t-Bu)}] (61), und [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\)(μ-CO){μ-BN(SiMe\(_3\))(t-Bu)}] (62) erfolgreich erhalten werden. Eine Analyse der gesammelten spektroskopischen (NMR, IR) und strukturellen Daten erlaubt folgende Schlussfolgerungen für die terminalen Borylen-Komplexe: [1] Die NMR-spektroskopischen Daten für die Gruppe-6-Metall-Komplexe der “ersten Generation” ([(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), und W (21)) zeigen, dass die \(^{11}\)B{\(^1\)H}- und \(^{13}\)C{\(^1\)H}-NMR Signale für die Carbonyle bei Gang zu den schwereren Homologen zu höherem Feld verschoben sind. Daraus resultiert die größte Entschirmung der Kerne für den Komplex [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19). [2] Die Bor-Metall-trans-Kohlenstoff-Achse (B-M-C\(_{trans}\)) in den Borylen-Komplexen der “ersten Generation” [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Mo (20) und W (21)) ist nicht linear, was einen direkten Vergleich der IR-Schwingungsbanden miteinander verhindert. Die Chrom-Verbindung ist nahezu linear und zeigt die erwarteten drei IR-Schwingungsbanden für die Carbonyle, die im Vergleich zum Chrom-Bis(trimethylsilyl)aminoborylen-Komplex (OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) zu höheren Energien verschoben sind. Die Befunde deuten darauf hin, dass der ({BN(SiMe\(_3\))(t-Bu)})-Ligand ein etwas stärkerer σ-Donor ist. [3] Wie in Transferreaktionen gezeigt werden konnte, bevorzugt der Borylen-Ligand {BN(SiMe\(_3\))(t-Bu)} einen terminalen Koordinationsmodus bei Lewis-aciden, frühen Übergangsmetallen und einen verbrückenden Koordinationsmodus bei Lewis-basischen, späten Übergangsmetallen. Projekt: Borirene Die Synthese der ersten Bis(borirenyl)platin-Komplexe wurde vorgestellt, zusammen mit strukturellen und elektronischen Auswirkungen der koplanar angeordneten Borirenringe. Die Reihe der trans-Bis(borirenyl)platin-Komplexe 119/120, 122/123, und 125/126 stellt die ersten Beispiele für Bis(boriren)-Komplexe dar, in denen die Ringsysteme koplanar zueinander angeordnet sind (Abbildung 6-4). Die Rolle des Platinatoms als Vermittler elektronischer Kommunikation zwischen den chromophoren, aromatischen Borliganden manifestiert sich in einem bathochromen Shift der Boriren-Absorptionsbanden im Vergleich zu Mono-σ-Borirenyl-Systemen, als Folge einer ausgedehnten Elektronendelokalisierung. Das trans-Bis(boriren)platin-Gerüst dient dabei als vereinfachtes monomeres System, um sowohl die Effekte des Übergangmetallatoms in der Vermittlung elektronischer Konjugation als auch die Abstimmbarkeit der photophysikalischen Eigenschaften in Abhängigkeit der dreigliedrigen, aromatischen Ringe zu studieren. Eine Reihe von trans-Bis(alkinyl)platin-Komplexen (95, 102, 106, und 63) wurde als Plattform für den Borylentransfer von {BN(SiMe\(_3\))\(_2\)} dargestellt (Abbildung 6-3). Durch Salzeliminierungsreaktionen von cis-[PtCl\(_2\)(PEt\(_3\))\(_2\)] (93) mit zwei Äquivalenten des entsprechenden Alkins in Diethylamin ließen sich die Komplexe "trans-[Pt(C≡C-Ph)\(_2\)(PEt\(_3\))\(_2\)]" (95), "trans-[Pt(C≡C-p-C\(_6\)H\(_4\)OMe)\(_2\)(PEt\(_3\))\(_2\)] " (102), "trans-[Pt(C≡C-p-C\(_6\)H\(_4\)CF\(_3\))\(_2\)(PEt\(_3\))\(_2\)]" (106), und "trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)]" (63) synthetisieren. Drei trans-Bis(borirenyl)platin-Komplexe (119/120, 122/123, und 125/126) konnten erfolgreich durch photolytischen Transfer des terminalen Borylen-Liganden {BN(SiMe\(_3\))\(_2\)} vom Chrom-Komplex [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) auf die trans-Bis(alkinyl)platin-Komplexe (95, 102, und 106) dargestellt werden (Abbildung 6-4). Versuche des Borylentransfers auf den trans-Bis(alkinyl)platin-Komplex "trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)]" (63) scheiterten an der Photoinstabilität des Komplexes. Obwohl eine weitere Vielzahl an Platin-Alkinyl-Komplexen dargestellt wurde, verlief der Borylentransfer nur bei den drei eben erwähnten Komplexen erfolgreich. Weitere Bestrebungen, ein cis-Isomer zum direkten Vergleich mit den trans-konfigurierten Komplexen darzustellen, verliefen ebenfalls erfolglos. Außerdem wurden terminal funktionalisierte Platin-Komplexe vom Gladysz-Typ als Plattform zum Borylentransfer synthetisiert, zeigten sich aber ebenfalls instabil unter photolytischen Bedingungen. Eine Reihe neuer Monoborirene Ph-(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph (148), trans- [PtCl{(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph}(PEt\(_3\))\(_2\)] (149), und [(η\(^5\)-C\(_5\)Me\(_5\))(OC)\(_2\)Fe(μ- {BN(SiMe\(_3\))(t-Bu)}C=C)Ph] (150) wurde durch photolytischen und thermischen Transfer des unsymmetrischen {BN(SiMe\(_3\))(t-Bu)}-Liganden ausgehend von den Komplexen [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), und W (21)) auf organische und organometallische Alkin-Substrate dargestellt. Ziel dieser Umsetzungen war es zu untersuchen, ob der unsymmetrische Borylen-Ligand eine andere Reaktivität im Vergleich zu den symmetrischen, terminalen Borylenen der Form [(OC)\(_5\)M{BN(SiMe\(_3\))\(_2\)}] (M = Cr (13), Mo (14), und W (15)) aufweist. Die entsprechenden Monoborirene wurden als analytisch reine Öle isoliert. Zur Röntgenstrukturanalyse geeignete Einkristalle konnten demnach nicht erhalten werden. Projekt: Boratabenzole Der Bis(boratabenzol)-Komplex [{(η\(^5\)-C\(_5\)H\(_5\))Co}\(_2\){μ:η\(^6\),η\(^6\)-(BC\(_5\)H\(_5\))\(_2\)}](189) wurde durch Umsetzung von Tetrabromdiboran (65) mit sechs Äquivalenten Cobaltocen erfolgreich dargestellt. Die Reaktion ist in der Hinsicht besonders, da Cobaltocen (176) sowohl als Reagens als auch als Reduktionsmittel fungiert (Abbildung 6-5). Der bimetallische Übergangsmetallkomplex besteht aus einem verbrückenden Bis(boratabenzol)-Liganden, der die beiden Metallzentren durch eine Bor-Bor-Einfachbindung verbindet. Es konnte gezeigt werden, dass der neuartige Ligand eine Delokalisierung der π-Elektronen zwischen den Cobaltatomen ermöglicht, begünstigt durch das zur Bor-Bor-Bindung zugehörige LUMO. Wie durch die Separation aufeinanderfolgender Redoxprozesse im Cyclovoltammogramm gezeigt werden konnte, vermittelt der dianionische Diborligand die elektronische Kopplung zwischen den Cobaltatomen. Vier verschiedene Redoxpotentiale wurden für Komplex 189 gefunden:E\(_{1/2}\)(1) = −0.84 V, E\(_{1/2}\)(2) = −0.94 V, E\(_{1/2}\)(3) = −2.09 V, und E\(_{1/2}\)(4) = −2.36 V (referenziert gegen das Fc/Fc+-Paar) (Abbildung 6-6). Die Potentiale können zwei dicht beieinander liegenden Oxidationsprozessen ([(189)]\(^{0/+1}\) und [(189)]\(^{+1/+2}\) und zwei gut getrennten Reduktionsprozessen [(189)]\(^{+1/+2}\) und [(189)]\(^{–1/–2}\) zugeordnet werden. Das Ausmaß der Metall-Metall-Kommunikation ist dabei abhängig von der Ladung der Metallatome. Die negative Ladung wird effektiver durch die Bis(boratabenzol)-Einheit delokalisiert (Robin-Day-Klasse II). Magnetische Messungen deuten darauf hin, dass die Cobalt(II)-Ionen schwach antiferromagnetisch über die B-B-Brücke gekoppelt sind. Während die Reduktion des Bis(boratabenzol)-Systems zur Zersetzung des Komplexes führte, resultierte die Ein- und Zwei-Elektronen-Oxidation in isolierbaren, stabilen monokationischen (194) bzw. dikationischen (195) Formen des Bis(boratabenzol)-Komplexes (Abbildung 6-7). Die präparativen Arbeiten bestätigen damit die elektrochemischen Ergebnisse an der neutralen Verbindung. Die kationischen Spezies zeigten sich instabil in Acetonitril oder Nitromethan, den einzigen Lösungsmitteln worin sie sich lösten, was weitere Reaktivitätsstudien erschwerte. Schließlich wurde die Reaktivität des neutralen Bis(boratabenzol)-Komplexes 189 eingehender untersucht. Versuche zur (A) Abspaltung des freien Bis(boratabenzol)-Liganden durch Dekomplexierung der Cyclopentadienylcobalt-Fragmente und zur (B) oxidativen Addition von Übergangsmetall-Komplexen an die B-B-Bindung, um die ersten L\(_x\)M-η\(^1\)-(BC\(_5\)H\(_5\))Komplexe darzustellen, wurden unternommen. Alle Versuche zeigten jedoch, dass die eingesetzten Reagenzien entweder zu keinen Umsetzungen oder zur Zersetzung des Bis(boratabenzol)-Komplexes führten. Bisher konnten somit noch keine Hinweise auf eine oxidative Addition der B-B-Bindung im Bis(boratabenzol)-Komplex erhalten werden. KW - Borverbindungen KW - Boron Chemistry KW - Aromatic Systems KW - Transition Metals KW - Aromaten KW - Übergangsmetall KW - Chemistry Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-137498 ER - TY - THES A1 - Molitor, Sebastian T1 - Stabilisierung und Reaktivität carbenoider Verbindungen T1 - Stabilization and Reactivity of carbenoid compounds N2 - Ziel der vorliegenden Doktorarbeit war die Stabilisierung und Isolierung von Alkalimetall-Carbenoiden sowie die Entwicklung neuer Anwendungsgebiete dieser Verbindungen. Dabei konzentrierte sich der erste Teil auf die thermische Stabilität und die Kontrolle der Reaktivität dieser Verbindungen, während der zweite Teil die Stabilitäts-Reaktivitäts-Beziehung der Verbindungsklasse beinhaltet. Stabilität von M/X-Carbenoiden Ein Schwerpunkt lag dabei auf der Synthese, den Eigenschaften und der Reaktivität Silyl-substituierter Carbenoide. Diese wurden durch Deprotonierung der Fluor- und Chlorvorstufen mit einer geeigneten Alkalimetall-Base zunächst in situ erzeugt (Abb. 4.1), da sie trotz stabilisierender Gruppen thermisch instabil waren und sich meist bei Temperaturen über –40 °C zersetzten. Durch die Einführung der Thiophosphoryl- und Silylgruppe konnten erstmals systematische Studien zu den Eigenschaften und Stabilitäten der Carbenoide mit unterschiedlichen M/X-Kombinationen durchgeführt werden. Hierbei gelang es neben dem Einfluss der Abgangsgruppe auch den Einfluss der unterschiedlichen Alkalimetalle zu untersuchen, welcher in der Literatur bisher nahezu unbeachtet geblieben war. Abb. 4.1. (oben) Synthese von 52-M und 53-M; (unten) Molekülstrukturen der Carbenoide 53-Na und 53-K im Festkörper. Durch NMR-spektroskopische Untersuchungen konnte die erfolgreiche Synthese der Fluor- bzw. Chlor-Carbenoide 52-M und 53-M (mit M = Li, Na, K) nachgewiesen werden. Diese zeigten im 31P{1H}-NMR-Spektrum nur eine geringe Verschiebung verglichen mit den protonierten Vorstufen, allerdings bestätigte das Fehlen des Signals für das Brückenwasserstoffatom im 1H-NMR-Spektrum die erfolgreiche Synthese der Verbindungen. Das Signal des carbenoiden Kohlenstoffatoms im 13C{1H}-NMR-Spektrum zeigte bei den Chlor-Carbenoiden nur eine geringe Änderung verglichen mit der protonierten Ausgangsverbindung. Die um etwa 35 Hz erhöhte 1JCP-Kopplungskonstante ließ jedoch auf einen erhöhten s-Charakter der P–C-Bindung und damit auf ein sp2-hybridisiertes Kohlenstoffatom schließen. Durch VT-NMR-Messungen konnte die thermische Instabilität der Carbenoide bestätigt und die genauen Zersetzungstemperaturen bestimmt werden. Dabei zeigte sich, dass 53-Li mit einer Zersetzungstemperatur von TD = 0 °C thermisch am instabilsten ist. Durch das Ersetzten von Lithium durch Natrium konnte die Stabilität des Carbenoids drastisch erhöht werden, was sich in einer Zersetzungstemperatur von TD = 30 °C widerspiegelt. Diese Beobachtung ist entgegen des Trends der Stabilität von einfachen Alkalimetallorganylen und hebt die Besonderheit der Alkalimetall-Carbenoide hervor. Es konnte dabei auch gezeigt werden, dass durch Kalium keine weitere Stabilisierung erzielt werden konnte. Allgemein ähneln sich die beobachteten Natrium- und Kalium-Carbenoide 53-Na und 53-K sowohl in ihrer thermischen Stabilität als auch in ihren NMR-spektroskopischen Eigenschaften. 53-Na und 53-K konnten – im Gegensatz zur Lithiumverbindung – in sehr guten Ausbeuten als gelbe Feststoffe isoliert und kristallographisch untersucht werden (Abb. 4.1). Damit stellen 53-Na und 53-K die ersten isolierten Carbenoide der schweren Alkalimetalle dar. 53-Na bildet ein Monomer, 53-K ein zentrosymmetrisches Dimer im Festkörper. Beide Carbenoide bilden sogenannte Carben-Donor-Komplexe mit einem M–Cl-Kontakt, aber keinerlei Wechselwirkung zwischen dem Metall und dem carbenoiden Kohlenstoffatom aus. Die beobachtete C1–Cl-Bindungsverlängerung um Δd = 0.05 Å (53-Na) bzw. Δd = 0.03 Å (53-K) bestätigt die erhöhte Polarisierung der C1–Cl-Bindung, was typisch für den carbenoiden Charakter ist. Durch elektrostatische Wechselwirkungen und negativer Hyperkonjugation wird die negative Ladung am carbenoiden Kohlenstoff stabilisiert, was sich in einer Verlängerung der C1–P- bzw. C1–Si-Bindung und einer Verkürzung der P–S-Bindung äußert. Die erhöhte Stabilität von 53-Na und 53-K verglichen mit der Lithiumverbindung wurde auf die erhöhte Polarität, geringere Lewis-Acidität und den erhöhten ionischen Charakter der M–C-Wechselwirkung zurückgeführt. Diese Vermutung führte zur Annahme, dass eine Manipulation der M–C-Wechselwirkung die Möglichkeit bietet, die Stabilität von Carbenoiden zu kontrollieren. Durch die Koordination starker Donorliganden wie 12-Krone-4 im Fall von Lithium bzw. 18-Krone-6 für Kalium konnten die entsprechenden Carbenoide synthetisiert und strukturell charakterisiert werden. Dabei bildeten sich durch die Koordination des Kronenethers separierte Ionenpaare im Festkörper, was zur gewünschten thermischen Stabilisierung führte. So zeigte 53-Li•(12-Krone-4)2 eine erhöhte Zersetzungstemperatur von TD = 20 °C im Vergleich zum THF-Addukt [(53-K)2•(18-Krone-6): TD = 40 °C]. Die für die Chlor-Carbenoide 53-M durchgeführten Untersuchungen wurden im Anschluss auf die Fluor-Carbenoide 52-M erweitert. Dabei belegten NMR-spektroskopische Studien die erwartungsgemäß geringere thermische Stabilität der Fluor-Systeme. Im Fall von 52-Li konnte eine Zersetzungstemperatur von TD = –70 °C bestimmt werden, während sich 52-Na und 52-K mit Zersetzungstemperaturen von TD = 10 °C (52-Na) bzw. 30 °C (52-K) – analog zu den Chlor-Carbenoiden – als thermisch deutlich stabiler erwiesen. Das carbenoide Kohlenstoffatom erfährt im 13C{1H}-NMR-Spektrum eine für Carbenoide typische Tieffeldverschiebung im Vergleich zur protonierten Vorstufe. Diese fällt im Fall von 52-Li (ΔC = 33 ppm) etwas größer aus als für 52-Na (ΔC = 32 ppm) bzw. 52-K (ΔC = 30 ppm). Neben der Bestimmung der Zersetzungstemperatur der Carbenoide gelang es ebenfalls, die Zersetzungsprodukte der M/Cl- und M/F-Carbenoide aufzuklären und zu charakterisieren. So konnte gezeigt werden, dass sich die Chlor-Carbenoide selektiv zur sesselartigen Verbindung 57 zersetzen (Abb. 4.2). Bei den Fluor-Carbenoiden 52-M kommt es hingegen zur Bildung unterschiedlicher Verbindungen. Diese werden jedoch vermutlich alle über das Thioketon-Intermediat TK gebildet, das durch Wanderung des Schwefels der Thiophosphorylgruppe zum carbenoiden Kohlenstoffatom entsteht und durch Abfangreaktion mit Methyllithium zum lithiierten Thioether 60 nachgewiesen werden konnte. In Abhängigkeit vom Metall und Abgangsgruppe werden anschließend unterschiedliche Reaktionswege durchlaufen. Gemäß des HSAB-Konzepts erfolgt im Fall des Lithium-Carbenoids der Angriff am Schwefelatom des Thioketons, wobei die zyklische Verbindung 57 gebildet wird. Beim weicheren Kalium-Carbenoid 52-K kommt es selektiv zur Bildung des Thioenolats 65, während für 52-Na ein Gemisch aus 57 und 65 beobachtet wird. Abb. 4.2. (oben) Zersetzungsreaktionen der M/X-Carbenoide 52-M und 53-M; (unten) Molekülstrukturen der Verbindungen 60 und 65 im Festkörper. Die zu 52 analogen bromierten und iodierten Ausgangsverbindungen eigneten sich nicht zur Darstellung von Carbenoiden. Hier gelang es nicht durch Deprotonierung die Carbenoide zu synthetisieren. Le Floch und Mitarbeiter konnten bereits 2007 zeigen, dass durch eine zweite stabilisierende Thiophosphorylgruppe das Li/Cl-Carbenoid 14 bis zu einer Temperatur von 60 °C keine Zersetzungsreaktionen zeigt. Basierend auf diesen Überlegungen wurden – analog zu den Silyl-substituierten Carbenoiden – der Einfluss der unterschiedlichen Alkalimetalle und Halogene auf die Eigenschaften und die Stabilität der entsprechenden Carbenoide untersucht. Zur Darstellung der Carbenoide wurden die protonierten Vorstufen 69-71 mit einem leichten Überschuss an Alkalimetallhexamethyldisilazan umgesetzt. Die Fluor-Carbenoide 69-M zeigten dabei wieder die für Carbenoide typische Tieffeldverschiebung des carbenoiden Kohlenstoff-atoms im 13C{1H}-NMR-Spektrum verglichen mit der protonierten Vorstufe. Im Fall der Chlor- und Brom-Carbenoide 70-M bzw. 71-M sind ähnliche Signalverschiebungen zu beobachten, allerdings fallen diese schwächer aus. Erneut sind starke spektroskopische Ähnlichkeiten zwischen den Natrium- und Kalium-Vertretern festzustellen, während die Lithium-Carbenoide eine gewisse Ausnahmestellung einnehmen. Abb. 4.3. (oben) Synthese von 69-M, 70-M und 71-M; (unten) Molekülstrukturen der Bis(thiophosphoryl)-substituierten Carbenoide 69-Na•PMDTA, 70-Na und 70-K im Festkörper. Durch VT-NMR-Messungen konnte gezeigt werden, dass alle Carbenoide bis Temperaturen von 60 °C keine Zersetzungsreaktionen eingehen. So gelang es, alle Carbenoide als gelbe Feststoffe zu isolieren. Einzig das Li/F-Carbenoid erwies sich bei Raumtemperatur als instabil und wies eine Zersetzungstemperatur von TD = 0 °C auf. Damit ist es das bis heute stabilste Li/F-Carbenoid das in der Literatur bekannt ist. Durch röntgenkristallographische Untersuchungen konnten alle Chlor- bzw. Brom-Carbenoide 70-M bzw. 71-M sturkturell charakterisiert werden. Dabei ist es gelungen, zusätzlich zu den bereits bekannten Strukturen schwerer Alkalimetall-Carbenoide, einige Metall-Halogen-Kombinationen erstmalig strukturell zu charakterisieren. Durch den Zusatz von PMDTA gelang es auch das erste Na/F-Carbenoid zu charakterisieren. Abbildung 4.3 zeigt exemplarisch einige Vertreter der neuen Strukturen. Auffällig ist dabei, dass in Abhängigkeit des Metalls ähnliche Strukturen erhalten wurden. So bilden die Kalium-Vertreter 70-K und 71-K wieder ein zentrosymmetrisches Dimer aus, während die Natrium-Vertreter 69-Na•PMDTA, 70-Na, 71-Na und 71-Li als Monomere vorliegen. Bei den beschriebenen Carbenoiden ist nur bei 69-Na•PMDTA und 70-Na die für Carbenoide typische C1–X-Bindungsverlängerung beobachtbar, was auf deren erhöhten carbenoiden Charakter im Vergleich mit den anderen Systemen schließen lässt. Zusammenfassend lässt sich folgender allgemeiner Trend formulieren: Der carbenoide Charakter fällt in der Gruppe der Halogene von F zu I und in der Gruppe der Alkalimetalle gemäß Li > Na ≥ K. Die thermische Stabilität zeigt gleichzeitig einen inversen Trend (Abb. 4.4). Reaktivität, carbenoider Charakter Thermische Stabilität Abb. 4.4. Tendenzen in den Eigenschaften von Carbenoiden. Reaktivität und Anwendung Nachdem die Carbenoide auf ihre Stabilitäten, NMR-spektroskopischen und strukturellen Eigenschaften untersucht wurden, stand in weiteren Studien die Reaktivität der Carbenoide im Vordergrund. Hierbei lag der Fokus vor allem auf E–H-Bindungsaktivierungsreaktionen, da es bislang nur wenige Beispiele für Carbenoide mit Hauptgruppenelementverbindungen gibt. Zunächst sollte die Reaktivität von 53-Li gegenüber Boranen untersucht werden. Hierbei kommt es zur selektiven Bildung des Lithiumborats 79 (Abb. 4.5). An das ehemalige carbenoide Kohlenstoffatom ist dabei eine BH3-Einheit und ein weiteres Wasserstoffatom gebunden. Durch theoretische und experimentelle Untersuchungen konnte der Reaktionsmechanismus zu 79 aufgeklärt werden, der als schrittweise B–H-Aktivierung beschrieben werden kann. So kommt es zunächst zur Boratbildung und anschließend zum Cl/H-Austausch mit Hilfe eines weiteren Boran-Moleküls. Dies konnte durch Deuterierungsexperimente mit BD3•THF experimentell bestätigt werden. Die Lithiumboratbildung zeigte sich dabei abhängig von der Stabilität der Lewis-Basen-Addukte, da mit den stabileren Amin- bzw. Phosphan-Boran-Addukten keine Umsetzung zu 79 beobachtet werden konnte. Abb. 4.5. (links) B–H-Aktivierung durch Carbenoid 53-Li; (rechts) Molekülstruktur des Lithiumborats 79 im Festkörper. Im nächsten Schritt wurde die Reaktivität gegenüber Phosphanen getestet. Dabei kam es interessanterweise nicht zu einer analogen P–H-Bindungsaktivierung, sondern vielmehr zu einer Dehydrokupplung der sekundären Arylphosphane zu den entsprechenden Diphosphanen unter Bildung der zweifach protonierten Vorstufe (Abb. 4.6). Diese Reaktion ist bisher einzigartig in der Chemie der Carbenoide und hebt deren großes Potenzial für weitere Anwendungen hervor. Das entwickelte Syntheseprotokoll stellt eine sehr selektive und effektive Methode dar, Phosphane zu Diphosphanen zu kuppeln. Es war so möglich die Diphosphane nach der Abtrennung der zweifach protonierten Vorstufe, die anschließend recycelt werden kann, in sehr guten Ausbeuten von über 90% zu isolieren. Dabei erlaubte das Syntheseprotokoll die Gegenwart funktioneller Gruppen, z.B. Methoxy-, Dimethylamino- oder Trifluoromethyl-Substitutenten. Überraschenderweise zeigten die Umsetzungen der Lithium-Carbenoide mit Chlorsubstituierten Arylphosphanen keinerlei Substitutionsreaktionen am Aromaten sondern führten ebenfalls selektiv zu den Diphosphanen. Einzig das sterisch anspruchsvolle sekundäre Arylphosphan Mes2PH oder aliphatische Phosphane wie tBu2PH oder Cy2PH eigneten sich nicht zur Dehydrokupplung. Im Fall des 3,5-Dichlorsubstiuierten Phosphans war es möglich neben dem Diphosphan das entsprechende P–H-Aktivierungsprodukt zu beobachten und in einer Ausbeute von 22% zu isolieren. Diese Aktivierung zeigte sich abhängig von der Konzentration der Reaktionslösung und konnte durch hohe Verdünnung unterdrückt werden. Abb. 4.6. (links) Carbenoid-vermittelte Dehydrokupplung von Ar2PH; (rechts) Molekülstruktur von (p-C6H4Me)4P2 im Festkörper. Bemerkenswerterweise zeigten quantenchemische Studien, dass die einfachen und nicht-stabilisierten Carbenoide, wie beispielsweise LiC(H)Cl2, nicht für die Dehydrokupplung von Phosphanen geeignet sind und eine ausreichende elektronische Stabilisierung für selektive Umsätze erforderlich ist. So ist zwar im Experiment für alle untersuchten Carbenoide die Diphosphan-Bildung beobachtbar, allerdings für unstabilisierte Systeme nur als Nebenreaktion. Mechanistische Studien zeigten, dass der erste Schritt der Reaktion die Deprotonierung des Phosphans und die Bildung einer Phosphid-Spezies ist. Dieser Schritt ist im Fall der stabilisierten Carbenoide bevorzugt. Bei den nicht-stabilisierten Carbenoiden stellt die Bildung des Carbens unter Salzeliminierung den ersten Reaktionsschritt dar, was im Anschluss zu unselektiven Folgereaktionen führt. Die synthetisierten Diphosphane besitzen großes Potenzial für weitere Anwendungen, beispielsweise als Liganden in der Übergangsmetallkatalyse. Basierend auf diesen Überlegungen wurden in anfänglichen Studien die Diphosphane an Gold(I)-Fragmente koordiniert (Abb. 4.7). Es gelang dabei die Diphosphan-Bisgold-Komplexe in nahezu quantitativen Ausbeuten als farblose Feststoffe zu isolieren und mittels Multikern-NMR-Spektroskopie und hochaufgelöster Massenspektrometrie zu charakterisieren. Einzig die Chlor-substituierten Diphosphane zeigten nach der Zugabe von Gold(I) bereits Kupplungsreaktionen mit sich selbst. Röntgenkristallographische Untersuchungen zeigten, dass die beiden Gold-Zentren eine trans-Stellung zueinander einnehmen, in der keine intramolekulare Au•••Au-Wechselwirkung beobachtet werden konnte. Auch in der Kristallpackung zeigte sich, dass die Bildung der Festkörperstrukturen von C–H•••X- und π•••π-Wechselwirkungen dominiert wird. Studien zum Einsatz in der Katalyse stehen noch aus. Da die Komplexe in allen geläufigen Lösungsmitteln schwer löslich sind, besteht weiter Optimierungsbedarf, um die Löslichkeit, z.B. durch Einführung von Alkylgruppen, zu erhöhen. Abb. 4.7. (links) Syntheseweg zu Diphosphan-Bisgold-Komplexen; (rechts) Molekülstruktur des Bisgold-Komplexes von (p-C6H4Me)4P2 im Festkörper. Neben der einzigartigen Reaktivität Silyl-substituierter Carbenoide gegenüber element-organischen Verbindungen wie Boranen oder Phosphanen wurde auch die Reaktivität gegenüber späten Übergangsmetallkomplexen, hier exemplarisch [Pd(PPh3)4] untersucht. Ziel sollte es sein mit Carbenoiden als selektiven Carbentransferreagenzien Zugang zu Carbenkomplexen zu erhalten, die schwer über alternative Routen zugänglich sind. Bei Verwendung der Silyl-substituierten Systeme kam es dabei jedoch zunächst nicht zur selektiven Synthese des Carbenkomplexes C, sondern vielmehr zu Produktgemischen aus Thioketon-komplex T und Carbenkomplex C. Die Verhältnisse erwiesen sich jedoch als abhängig vom Metall, Halogen und der Silylgruppe des Carbenoids sowie von der Reaktionstemperatur. Tabelle 4.1 zeigt eine Übersicht. Je tiefer die Temperatur und je größer die Substituenten der Silylgruppe desto mehr Carbenkomplexbildung kann beobachtet werden. Theoretische Berechnungen der Trimethylsilyl- bzw. Triphenylsilyl-Systeme konnten die experimentellen Befunde bestätigen. Der Thioketonkomplex T stellt so das thermodynamisch stabilere Produkt dar, während der Carbenkomplex C kinetisch bevorzugt ist. Erfreulicherweise gelingt bei Verwendung der im Vergleich zum Lithiumsystem stabileren Natrium- bzw. Kalium-Carbenoide die selektive Synthese des Palladium-Carbenkomplexes C (Einträge 3 und 4). Durch die Stabilisierung des Li/Cl-Carbenoids durch Kronenether kann ebenfalls die Carbenkomplex-bildung forciert werden (Eintrag 5). Je stabiler die Carbenoide, desto selektiver wird der Carbenkomplex C gebildet. Das zeigt auch die Reaktion des sehr reaktiven Li/F-Carbenoids, das vollständig zum Thioketonkomplex T reagiert (Eintrag 11). Bei den Kalium-Carbenoiden der sterisch anspruchsloseren Silyl-Systeme tritt noch ein weiteres Reaktionsprodukt auf, das als das Ylid Y identifiziert wurde. Dieses tritt auch bei Kristallisationsversuchen des Carben-komplexes auf und wurde röntgenkristallographisch untersucht. Tabelle 4.1. Reaktivität unterschiedlicher Silyl-substituierter Carbenoide gegenüber [Pd(PPh3)4]. Eintrag Metall Halogen Silylgruppe Temperatur Thioketon-komplex [%]a Carben-komplex [%]a Ylid [%]a 1 Li Cl SiPh3 RT 80 20 - 2 Li Cl SiPh3 –78 °C 48 52 - 3 Na Cl SiPh3 RT - >99 - 4 K Cl SiPh3 RT - >99 - 5 Li•(12-Krone-4) Cl SiPh3 RT - 93 - 6 K•(18-Krone-6) Cl SiPh3 RT - 75 25 7 K Cl SiMePh2 –40 °C - 71 29 8 K Cl SiMe2Ph –40 °C - 43 57 9 K Cl SiMe3 –10 °C 70 30 - 10 K Cl SiMe3 –40 °C 40 33 26 11 Li F SiPh3 –78 °C >99 - - [a] Verhältnis der Produkte durch 31P{1H}-NMR-Spektroskopie bestimmt. Trotz selektiver Synthese des Carbenkomplexes 119 erwies sich die Aufreinigung als problematisch, da das gebildete Triphenylphosphan vermutlich aufgrund der Koordination an das Metallsalz schwer abgetrennt werden konnte. Überraschenderweise zeigte sich beim Erwärmen des Gemisches auf 80 °C die Bildung einer neuen Verbindung, die als Diphosphanphosphonium-Komplex 121 identifiziert wurde. Dieser konnte mittels NMR-spektroskopischer Untersuchungen und hochauf-gelöster Massenspektrometrie charakterisiert werden. Studien zur Strukturanalyse und zur Reaktivität stehen hier allerdings noch aus. Da der Carbenkomplex zunächst nicht selektiv dargestellt werden konnte, wurde eine alternative Syntheseroute entwickelt. Diese beinhaltete die oxidative Addition der halogenierten Liganden an das Übergangsmetall und anschließende Dehydrohalogenierung. Hierzu wurden analog Abbildung 4.9 zuerst die Palladium-Komplexe in einer oxidativen Additionsreaktion synthetisiert. Dabei gelang es sowohl unterschiedliche Halogenatome als auch unterschiedliche Silyl-Reste in der Synthese der Palladium-Komplexe zu etablieren. Die luftstabilen Verbindungen 129-134 konnten in moderaten bis guten Ausbeuten (52-91%) als gelbe Feststoffe isoliert und durch Multikern-NMR-Spektroskopie, hochaufgelöste Massen-spektrometrie und Röntgenstrukturanalyse charakterisiert werden. Sie besitzen in allen Fällen das sehr ähnliche Strukturmotiv eines nahezu quadratisch-planar koordinierten Palladium-atoms. Zur Dehydrohalogenierung wurden die Komplexe 129-134 mit verschiedenen Basen umgesetzt. Mit Hilfe der Alkalimetallhexamethyldisilazan-Basen gelang die gewünschte HX-Eliminierung, jedoch nicht unter Bildung des Carbenkomplexes, sondern biscyclo-metallierter Produkte. Beim Triphenylsilyl-substituierten System 129 konnte nach der Aufarbeitung Verbindung 135 isoliert werden, bei der ein an das Siliciumatom gebundener Phenylring metalliert wurde. Bei den Methyl-substituierten Vertretern 131 und 133 fand hingegen selektiv die Metallierung einer Methylgruppe unter Ausbildung ungewöhnlicher Palladacyclobutane statt. Dies konnte im Fall von 137 eindeutig durch Röntgenstrukturanalyse bestätigt werden (Abb. 4.9). Abb. 4.9. (links) Syntheseweg zu den Palladium-Komplexen 129-138; (rechts) Molekülstrukturen der Palladium-Komplexe 130 und 137 im Festkörper. Da cyclometallierte Palladium-Komplexe als effektive Katalysatoren in C–C-Knüpfungs-reaktionen eingesetzt werden, sollte auch das Potenzial der synthetisierten Komplexe getestet werden. Dabei zeigte sich, dass alle Komplexe eine höhere Aktivität als [Pd(PPh3)4] in der Suzuki-Miyaura-Kupplung von 4-Bromanisol mit Phenylboronsäure aufweisen. Aus Tabelle 4.2 wird aber auch ersichtlich, dass die zweite Cyclisierung einen negativen Effekt auf die Aktivität hat. Verbindung 129, das Produkt der einfachen oxidativen Addition, zeigte bereits nach vier Stunden nahezu vollständigen Umsatz. Dabei konnten TON's von etwa 17000 bei nahezu gleichbleibendem Umsatz erzielt werden (Eintrag 5). Tabelle 4.2. Palladium-katalysierte Suzuki-Miyaura-Kupplung von 4-Bromanisol und Phenylboronsäure. Eintrag Katalysator Katalysator-Ladung [mol %] Reaktionszeit [h] NMR-Ausbeute [%]a 1 [Pd(PPh3)4] 0.5 2 25 2 129 0.5 1.75 79 3 129 0.5 4 95 4 129 0.5 8 98 5 129 0.005 3 85 6 137 0.5 4 71 7 137 0.5 8 87 8 137 0.5 10 92 9 135 0.5 8 92 [a] Ausbeuten bestimmt durch NMR-Spektroskopie bezogen auf 4-Bromanisol. Insgesamt konnten in dieser Doktorarbeit zahlreiche neue Erkenntnisse im Bereich der Carbenoidchemie erarbeitet werden. Diese lassen sich wiefolgt zusammenfassen: • Anhand von Silyl- und Thiophosphoryl-stabilisierter Carbenoide konnte erstmals systematisch der Einfluss der M/X-Kombination auf die Stabilität und Reaktivität von Carbenoiden untersucht werden. • Erstmals konnten Na- und K-Carbenoide isoliert und strukturell charakterisiert werden. • Mit Hilfe der Stabilisierung konnten neue Anwendungsgebiete im Bereich der element-organischen Chemie erschlossen werden, darunter die B–H-Bindungsaktivierung am carbenoiden Kohlenstoffatom und die Kupplung von Phosphanen. • Beim Einsatz von Carbenoiden als Carbentransferreagenzien zur Darstellung ungewöhnlicher Carbenkomplexe konnte gezeigt werden, dass Selektivitäten von zahlreichen Faktoren abhängen und beeinflusst werden können. Mit diesen Studien konnte folglich ein Kreis von der Stabilisierung und Isolierung der normalerweise hochreaktiven Carbenoide zu deren Anwendungen geschlossen werden. Die Studien zeigen zudem das Potenzial dieser Verbindungsklasse und lassen vermuten, dass durch ein weiteres Einstellen von Stabilität und Reaktivität noch bisher unbekannte Reaktionsmuster ermöglicht werden können. N2 - The present PhD thesis focussed on the stabilization and isolation of alkali metal carbenoids as well as the development of new applications of these compounds. Thereby, the first part concentrated on the thermal stability and a control of reactivity of these species, while the second part involved the establishment of stability-reactivity relationship with focus on new reactivity patterns. KW - Carbenoide KW - Carbenoid KW - Carben KW - Stabilisierung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-137607 ER - TY - THES A1 - Brede, Franziska Andrea T1 - Synthesestrategien und Struktur-Eigenschafts-Beziehungen anorganisch-organischer Hybridmaterialien basierend auf 3d-Übergangsmetallchloriden und N-heterozyklischen Liganden T1 - Synthesis strategies and structure-property relations of inorganic-organic hybrid materials based on 3d-transition metal chlorides and N-heterocyclic ligands N2 - Die vorliegende Arbeit umfasst die Synthese, die Untersuchung von Struktur-Eigenschafts-Beziehungen und Eigenschaftsmodifikationen von Komplexen und Koordinationspolymeren basierend auf den 3d-Übergangsmetallchloriden von Mn, Fe, Co sowie Zn und N-heterozyklischen Liganden. Durch die Kombination von mechanochemische Umsetzungen, mikrowellenassistierten Synthesen, solvensassistierten, solvothermalen und solvensfreien Reaktionen zu verschiedenen Synthesestrategien wurden 23 neue Koordinationsverbindungen synthetisiert und charakterisiert. Ausgehend von den auf mechanochemischem Weg synthetisierten, monomeren Precursor-Komplexen [MCl2(TzH)4] (M = Mn und Fe) konnten die höhervernetzten Koordinationspolymere 1∞[FeCl(TzH)2]Cl und 1∞[MCl2(TzH)] (M = Fe und Mn) durch thermische und mikrowelleninduzierte Konversionsreaktionen als phasenreine Bulkprodukte erhalten werden. Die sukzessive Abgabe organischer Liganden und die damit verbundene Umwandlung in die höhervernetzten Spezies wurden dabei mittels temperaturabhängiger Pulverdiffraktometrie und simultanem DTA/TG-Verfahren analysiert. Durch gezielte Variation der Lösungsmittel beim Liquid-assisted grinding, der mechanochemischen Synthese unter Zugabe einer flüssigen Phase, konnten die beiden polymorphen Koordinationspolymere α-1∞[MnCl2(BtzH)2] und β-1∞[MnCl2(BtzH)2] erhalten werden, die im monoklinen bzw. orthorhombischen Kristallsystem kristallisieren. Solvensassistierte Umsetzungen von MnCl2 mit 1,2,4-1H-Triazol (TzH) unter Zugabe von Hilfsbasen resultierten unter anderem in der Bildung der dreidimensionalen Koordinationspolymere 3∞[MnCl(Tz)(TzH)] und 3∞{[Mn5Cl3(Tz)7(TzH)2]}2·NEt3HCl. Die Untersuchung von Struktur-Eigenschafts-Korrelationen erfolgte systematisch an ausgewählten Verbindungen hinsichtlich ihrer dielektrischen Eigenschaften. Dabei wurden die Einflüsse intra- und intermolekularer Wechselwirkungen auf die strukturelle Rigidität und die daraus folgenden Polarisierbarkeitseigenschaften analysiert und miteinander verglichen. Die gemessenen dielektrischen Konstanten erstrecken sich von Werten im high-k-Bereich für monomere Komplexe bis hin zu den nahezu frequenzunabhängigen low-k-Werten der eindimensionalen Koordinationspolymere 1∞[MnCl2(TzH)] und 1∞[MnCl2(BtzH)2] sowie der Komplexe [ZnCl2(TzH)2] und [ZnCl2(BtzH)2]·BtzH. Eigenschaftsmodifikationen und -optimierungen der synthetisierten Verbindungen er-folgten zum einen durch Erzeugung flexibler Kunststofffilme, in welche die eindimensionalen Koordinationspolymere 1∞[MCl2(TzH)] (M = Fe und Mn) eingebettet wurden. Zum anderen konnten in mechanochemischen Umsetzungen superparamagnetische Kompositpartikel bestehend aus einem Fe3O4/SiO2-Kern und einer kristallinen [ZnCl2(TzH)2]-Hülle erhalten werden, die in situ aus den Edukten ZnCl2 und TzH synthetisiert wurde. N2 - This thesis deals with the synthesis, the investigation of structure-property-relations and property modifications of complexes and coordination polymers based on 3d-transition metal chlorides of Mn, Fe, Co and Zn and N-heterocyclic ligands. The combination of different synthesis strategies including mechanochemistry, micro-wave-assisted reactions, solvothermal, solvent-assisted and solvent-free approaches results in the formation and characterization of 23 new coordination compounds. The utilization of the mechanochemically synthesized, monomeric complexes [MCl2(TzH)4] (M = Mn and Fe) as precursors yield the higher dimensional coordination polymers 1∞[FeCl(TzH)2]Cl and 1∞[MCl2(TzH)] (M = Fe and Mn) as phase-pure bulk products by thermal or microwave-induced conversion reactions. The stepwise release of organic ligands and the formation of the high-temperature species was monitored and determined via temperature-dependent powder diffraction as well as simultaneous DTA/TG analysis. Depending on the utilized solvent, liquid-assisted grinding of MnCl2 and BtzH leads to the formation of the two polymorphous coordination polymers α-1∞[MnCl2(BtzH)2] and β-1∞[MnCl2(BtzH)2], crystallizing either in the orthorhombic or in the monoclinic crystal system. Solvothermal reactions of MnCl2 and 1,2,4-1H-triazole (TzH) with additional amounts of assistant bases exhibit the two three-dimensional coordination poly-mers 3∞[MnCl(Tz)(TzH)] and 3∞{[Mn5Cl3(Tz)7(TzH)2]}2·NEt3HCl. The investigation of structure-property-correlations was carried out systematically by determining the dielectric properties of selected compounds. The influences of intra- and intermolecular interactions on the structural rigidity and the resulting polarizabil-ity were investigated. The dielectric constants range from high-k values for monomeric complexes to almost frequency-independent low-k values for the one-dimensional co-ordination polymers 1∞[MnCl2(TzH)] and 1∞[MnCl2(BtzH)2] as well as the complexes [ZnCl2(TzH)2] and [ZnCl2(BtzH)2]·BtzH. On the one hand, modifications of the compounds' properties were achieved by em-bedding the coordination polymers 1∞[MCl2(TzH)] (M = Fe and Mn) in flexible plastic films. On the other hand, via mechanochemical approaches, a superparamagnetic com-posite material was obtained by in situ formation of the crystalline complex [ZnCl2(TzH)2] (3) on Fe3O4/SiO2 microparticle cores. KW - Komplexe KW - Mechanochemie KW - Mikropartikel KW - Heterocyclische Verbindungen KW - Übergangsmetallchloride KW - Thermische Konversion KW - Organisch-anorganischer Hybridwerkstoff KW - Koordinationsverbindung KW - Struktur-Eigenschafts-Beziehung KW - Permittivität Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-138146 ER - TY - JOUR A1 - Arrowsmith, Merle A1 - Böhnke, Julian A1 - Braunschweig, Holger A1 - Celik, Mehmet A1 - Claes, Christina A1 - Ewing, William A1 - Krummenacher, Ivo A1 - Lubitz, Katharina A1 - Schneider, Christoph T1 - Neutral Diboron Analogues of Archetypal Aromatic Species by Spontaneous Cycloaddition JF - Angewandte Chemie, International Edition N2 - Among the numerous routes organic chemists have developed to synthesize benzene derivatives and heteroaro- matic compounds, transition-metal-catalyzed cycloaddition reactions are the most elegant. In contrast, cycloaddition reactions of heavier alkene and alkyne analogues, though limited in scope, proceed uncatalyzed. In this work we present the first spontaneous cycloaddition reactions of lighter alkene and alkyne analogues. Selective addition of unactivated alkynes to boron–boron multiple bonds under ambient con- ditions yielded diborocarbon equivalents of simple aromatic hydrocarbons, including the first neutral 6 π-aromatic dibora- benzene compound, a 2  π-aromatic triplet biradical 1,3-dibor- ete, and a phosphine-stabilized 2  π-homoaromatic 1,3-dihydro- 1,3-diborete. DFT calculations suggest that all three com- pounds are aromatic and show frontier molecular orbitals matching those of the related aromatic hydrocarbons, C\(_6\)H\(_6\) and C\(_4\)H\(_4\)\(^{2+}\), and homoaromatic C\(_4\)H\(_5\)\(^+\). KW - Aromaticity KW - Biradicals KW - Boron KW - Cycloaddition KW - Multiple bonds Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-138226 N1 - This is the peer reviewed version of the following article: Angew. Chem. Int. Ed. 2016, 55, 11271–11275, which has been published in final form at 10.1002/anie.201602384. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. VL - 55 ER - TY - JOUR A1 - Braunschweig, Holger A1 - Constantinidis, Philipp A1 - Dellermann, Theresa A1 - Ewing, William A1 - Fischer, Ingo A1 - Hess, Merlin A1 - Knight, Fergus A1 - Rempel, Anna A1 - Schneider, Christoph A1 - Ullrich, Stefan A1 - Vargas, Alfredo A1 - Woolins, Derek T1 - Highly Strained Heterocycles Constructed from Boron–Boron Multiple Bonds and Heavy Chalcogens JF - Angewandte Chemie, International Edition N2 - The reactions of a diborene with elemental selenium or tellurium are shown to afford a diboraselenirane or diboratellurirane, respectively. These reactions are reminiscent of the sequestration of subvalent oxygen and nitrogen in the formation of oxiranes and aziridines; however, such reactivity is not known between alkenes and the heavy chalcogens. Although carbon is too electronegative to affect the reduction of elements with lower relative electronegativity, the highly reducing nature of the B B double bond enables reactions with Se0 and Te0. The capacity of multiple bonds between boron atoms to donate electron density is highlighted in reactions where diborynes behave as nucleophiles, attacking one of the two Te atoms of diaryltellurides, forming salts consisting of diboratellurenium cations and aryltelluride anions. KW - Boron KW - Heterocycles KW - Multiple bonds KW - Selenium KW - Tellurium KW - Bor KW - Heterocyclische Verbindungen KW - Selen KW - Tellur Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-138237 N1 - This is the peer reviewed version of the following article: Angew. Chem. Int. Ed. 2016, 55, 5606–5609, which has been published in final form at 10.1002/anie.201601691. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. N1 - Accepted Version VL - 55 IS - 18 SP - 5606 EP - 5609 ER - TY - THES A1 - Nashed, Alexander T1 - Entwicklung spinnfähiger Precursorpolymere zur Herstellung nicht-oxidischer Keramikfasern T1 - Development of spinnable precursor polymers for the production of non-oxide ceramic fibers N2 - Ausgehend von chlorhaltigem Oligosilan, erhalten durch Disproportionierung der „Disilan-Fraktion“ der Müller-Rochow-Synthese, wurde mit verschiedenen Aminen dechloriert bzw. strukturell modifiziert. Die auf diese Weise in das Oligosilan eingeführten Baugruppen wurden spektroskopisch und durch Vergleich mit geeigneten Modellverbindungen identifiziert. Vernetzungsgrad und keramische Ausbeute der erzeugten Materialen wurden bestimmt. Mit Ammoniak oder einwertigen Aminen wie Methylamin werden Produkte erhalten, die sich nicht zu Keramikfasern verarbeiten lassen. Letzteres scheitert daran, dass entweder keine signifikante Molekulargewichtserhöhung des Oligosilans erreicht wird, oder führt dazu, dass das Oligomer vergelt und damit in Toluol unlöslich wird. Durch Umsetzung des Oligosilans mit zweiwertigen Aminen wie EDA oder TMDA als Vernetzungsreagenz gelang es, eine Syntheseroute zu entwickeln, die – anders als bei der am ISC etablierten Route – keinen thermischen Vernetzungsschritt erfordert, d.h. die gesamte Synthese findet bei Temperaturen ≤200 °C statt. Hierbei wird eine kontrollierbare Erhöhung des Molekulargewichts erreicht. Die Verwendung von TMDA hat gegenüber EDA den Vorteil, dass aufgrund des Ausbleibens von Ringbildung ein höher vernetztes Polymer erhalten wird. Darüber hinaus wurde gefunden, dass Grünfasern während der Pyrolyse durch radikalisch vernetzbare Gruppen (C=C-Doppelbindungen) im Polymer stabilisiert werden können. Diese Gruppen lassen sich entweder durch Dechlorierung mit Allylamin oder durch Umsetzung mit Vinyl-Grignard-Reagenzien einführen. Allylamin erwies sich hierbei als geeigneter, da es preiswerter und leichter handhabbar ist und außerdem – im Gegensatz zu Vinyl-Grignard-Reagenzien – eine vollständige Dechlorierung des Polymers gestattet. Alle Polymere wurden auf ihre Verarbeitbarkeit zu Grün- und anschließend zu Keramikfasern untersucht. Hierbei wurde gefunden, dass die im Hinblick auf die Eigenschaften der resultierenden Keramikfasern günstigste Rezeptur in der Umsetzung eines zuvor mit DMA vollständig dechlorierten Oligosilans mit 18,2 mol-% TMDA und 40 mol-% Allylamin (bezogen auf NMe2-Gruppen) besteht. Die aus diesem Polymer erhaltenen Keramikfasern zeigen die für noch nicht technisch ausgereifte, im Stadium der Entwicklung befindliche Fasern typischen Festigkeiten und entsprechen damit denjenigen, die auf der am ISC bereits etablierten Route erhältlich sind. Dies macht sie zu aussichtsreichen Kandidaten für die weitere Optimierung. N2 - Based on chlorine containing oligosilane which is synthesized via disproportionation of the “disilane fraction” of the Müller-Rochow synthesis, there have been dechlorinations respectively structural modifications with different amines. The structural components introduced into the oligosilane by this means were identified spectroscopically and by comparison with appropriate model compounds. The degree of crosslinking and the ceramic yield of the generated materials were detected. By the use of ammonia or primary amines like methylamine products are generated which cannot be converted to ceramic fibers. The latter fails because either no significant increase of the molecular weight of the oligosilane is obtained or the oligosilane gels and becomes insoluble in toluene. By the reaction of oligosilane with secondary amines like EDA or TMDA as a crosslinking reagent it succeeded to develop a synthesis route which – different from the route established at the ISC – doesn’t require any thermic crosslinking step what means that the whole synthesis takes place at temperatures ≤200°C. In this connection a controllable increase of the molecular weight is reached. The use of TMDA has the advantage over EDA that due to the absence of ring formation a higher cross-linked polymer is obtained. Furthermore it was found that green fibers can be stabilized during pyrolysis with radically curable groups (C=C double bonds) inside the polymer. These groups can be introduced either by dechlorination with allylamine or by reaction with vinyl Grignard reagents. Allylamine was proven to be more suitable because it is low-cost and easier to handle and besides – in comparison to vinyl Grignard reagents – it allows a complete dechlorination of the polymer. All polymers were analyzed concerning their processability to green and subsequent to ceramic fibers. Here it was found that the most favorable recipe with respect to the properties of the resulting ceramic fibers consists in the reaction of fully with DMA dechlorinated oligosilane with 18.2 mol-% TMDA and 40 mol-% allylamine (based on NMe2-groups). The ceramic fibers obtained from this polymer show typical stabilities as they are not yet technically mature and in the stage of development. For this reason they correlate with the ones which are already available by the established route at the ISC. This makes them to promising candidates for further optimization. KW - Keramikfaser KW - Polymerisation KW - Oligosilane KW - ceramic fibers KW - Precursorpolymer KW - SiC Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-138517 ER - TY - THES A1 - Schneider, Christoph T1 - Synthese und Reaktivität von Lewis-basischen Carbonylkomplexen der Gruppe 8 T1 - Synthesis and reactivity of Lewis basic group 8 carbonyle complexes N2 - Im Rahmen der vorliegenden Arbeit wurden Untersuchungen zur Lewis-Basizität von Carbonylkomplexen der Gruppe 8 durchgeführt. Hierzu wurde eine Reihe von Komplexen mit GaCl3 als Lewis-Säure zu den entsprechenden Lewis-Addukten umgesetzt. Durch Analyse der experimentell ermittelten spektroskopischen und strukturellen Parameter sowie auf der Basis von Transferexperimenten wurde die relative Lewis-Basizität dieser Verbindungen zueinander bestimmt. Durch Umsetzung von Eisenpenta-, -tetra- und -tricarbonylkomplexen mit den sterisch anspruchslosen Liganden PMe3, IMe und CNtBu mit der Lewis-Säure GaCl3 wurde eine Serie von GaCl3-Addukten dargestellt und diese durch NMR- und IR-Spektroskopie sowie Röntgenstruktur- und Elementaranalyse vollständig charakterisiert. Während die Eisentetracarbonyladdukte 36-38 die gleiche cis-Geometrie aufweisen ist die Adduktbildung bei den Eisentricarbonylen 43-45 mit Konformationsänderungen in den Addukten 46, 48 und 49 verbunden. Hierbei zeigen die GaCl3-Addukte 46, 48 und 49 drei unterschiedliche Geometrien. Vergleicht man die Fe-Ga-Bindungslängen beziehungsweise die Winkelsummen der ClGa-Cl-Winkel, so zeichnet sich ein Trend für die Lewis-Basizität in Abhängigkeit von der Natur der σ-Donorliganden ab. Demnach weisen die IMe-substituierten Eisencarbonyle im Vergleich zu den PMe3- beziehungsweise tBuNC-substituierten Analoga die höchste Lewis-Basizität auf. Zudem konnte belegt werden, dass die Lewis-Basizität auch durch die Anzahl an σ-Donorliganden im Komplex erhöht wird. Die schrittweise Erhöhung des sterischen Anspruchs der Liganden in den Eisencarbonylen erschwert die Adduktbildung und äußert sich auch in der trans-ständigen Anordnung der Lewis-Säure. Die Gegenwart von zwei sterisch anspruchsvollen Liganden verhindert indes die Adduktbildung mit GaCl3 und es kommt zu einer Disproportionierung der Lewis-Säure in eine kationische [GaCl2]+-Einheit, welche an das Eisenzentrum koordiniert und eine anionische [GaCl4]--Einheit, die als Gegenion fungiert. Neben dem elektronischen und sterischen Einfluss der Liganden auf die Lewis-Basizität und die Adduktbildung in Eisencarbonylen wurde auch der Einfluss des Zentralatoms untersucht. Hierzu wurden analoge Ruthenium- und Osmiumcarbonyle dargestellt und mit der Lewis-Säure GaCl3 umgesetzt. Hierbei wurde die Ligandensphäre im Vergleich zu den Eisencarbonylen nicht verändert. Um die M-Ga-Bindungsabstände untereinander vergleichen zu können, wurde aufgrund der unterschiedlichen Kovalenzradien der Zentralmetalle der relative Abstand (drel) herangezogen, wodurch die relativen Lewis-Basizitäten abgeschätzt werden konnten. Hierbei konnte der gleiche Trend wie bei den Eisencarbonyladdukten beobachtet werden, dass mit steigender Anzahl an σ-Donorliganden die Lewis-Basizität erhöht wird. Weiterhin liegt aufgrund der kleineren drel-Werte die Vermutung nahe, dass sowohl Ruthenium-, als auch Osmiumcarbonyle Lewis-basischer sind als die entsprechenden Eisencarbonyle. Diese Befunde wurden weiterhin durch Transferexperimente untermauert. Hierzu wurden verschiedene GaCl3-Addukte mit Carbonylkomplexen in CD2Cl2 umgesetzt und eine eventuelle Übertragung der Lewis-Säure GaCl3 NMR-spektroskopisch verfolgt. Hierdurch konnte gezeigt werden, dass die Lewis-Säure GaCl3 jeweils erfolgreich auf die Komplexe mit der höheren Anzahl an σ-Donorliganden übertragen wird, was deren höhere Lewis-Basizität belegt. Zudem konnte bestätigt werden, dass Ruthenium- und Osmiumcarbonyle Lewis-basischer als die analogen Eisencarbonyle sind, zwischen Ruthenium und Osmium bei gleicher Ligandensphäre jedoch kaum Unterschiede in der Lewis-Basizität vorgefunden werden. Zusätzlich wurden auch ausgewählte Gruppe 8-Carbonyladdukte mit dem literaturbekannten Platinkomplex [(Cy3P)2Pt] (7) umgesetzt. Hierbei wurde in allen Fällen ein Transfer von GaCl3 auf die Platinverbindung beobachtet, welche demnach die stärkste Lewis-Base in dieser Studie darstellt. Neben einkernigen GaCl3-Addukten wurden auch dinukleare Gruppe 8-Carbonyle dargestellt. Hierzu wurde anstelle von GaCl3 die Lewis-Säure Ag+ eingesetzt, was zur Bildung der zweikernigen Addukte 83-86 führte. Hierdurch konnte gezeigt werden, dass neben den Hauptgruppenmetallen wie Gallium auch Gruppe 8-Addukte mit Übergangsmetallen zugänglich sind. Des Weiteren konnten die zweikernigen Komplexe 87-89 mit chelatisierenden beziehungsweise verbrückenden Liganden dargestellt und deren Reaktivität gegenüber GaCl3 untersucht werden. Der Unterschied zwischen diesen beiden Ligandenarten besteht darin, dass der M-M-Abstand bei Verwendung von chelatisierender Liganden eher gering ist, weshalb hier immer noch M-M-Wechselwirkungen möglich sind, während diese bei Verwendung eines Brückenliganden verhindert werden. Ausgewählte Gruppe 8-Carbonyle wurden auch in Bezug auf ihre katalytische Aktivität in der Hydrosilylierung von Benzaldehyd (90) mit Phenylsilan (91) untersucht. Hierbei konnte gezeigt werden, dass NHC-substituierte Carbonylkomplexe einen höheren Umsatz ermöglichen als Phosphan- oder Isocyanid-substituierte Verbindungen. Zudem wurde deutlich, dass die analogen Ruthenium- und Osmiumcarbonyle eine wesentlich geringere Aktivität bei der Hydrosilylierung aufweisen als die Eisenanaloga, trotz einer höheren Lewis-Basizität. Abschließend konnten Halogenidabstraktionsreaktionen exemplarisch an den GaCl3-Addukten 46, 66 und 76 durch Umsetzung mit GaCl3 demonstriert werden, wodurch die kationischen dimeren Komplexe 104-106 erhalten wurden. In diesen Komplexen sind formal zwei [(Me3P)2(OC)3M-GaCl2]+-Einheiten durch Ga-Cl-Wechselwirkungen miteinander verbrückt. Im Gegensatz dazu führte die Umsetzung von 46, 66 und 76 mit Na[BArCl4] (101) zu keiner Chloridabstraktion. Stattdessen konnte eine Verbrückung zweier GaCl3-Adduktfragmente durch zwei Natriumkationen beobachtet werden. N2 - This work describes a detailed study on the Lewis basicity of group 8 carbonyl complexes. Thus, a variety of carbonyl complexes was treated with GaCl3 as Lewis acid to afford the corresponding Lewis adducts. Based on the analysis of spectroscopic and structural parameters of these adducts as well as on transfer experiments it was possible to evaluate the relative Lewis basicities of the metal carbonyl complexes. The reaction of iron penta-, tetra- and tricarbonyl complexes with the sterically less demanding ligands PMe3, IMe and tBuNC with the Lewis acid GaCl3 yielded a series of GaCl3 adducts, which could be fully characterized by NMR- and IR-spectroscopy, as well as X-ray diffraction and elemental analysis. While the three iron tetracarbonyl adducts 36-38 adopt the same cis geometry, adduct formation of the iron carbonyl complexes 43-45 entails a conformational change in the adducts 46, 48 and 49. Here, different geometries were observed. Comparison of the Fe-Ga bond lengths and the sum of the Cl-Ga-Cl angles of the adducts revealed a clear trend for the Lewis basicity depending on the nature of the σ-donor ligand. Thus, IMe substituted complexes showed the greatest Lewis basicity as compared to their PMe3 and tBuNC substituted analogs. In addition, the more σ-donor ligands are present in the iron carbonyls, the higher their Lewis basicity. Stepwise increase of the steric demand of the σ-donor ligands makes the adduct formation more difficult, which is illustrated in a trans position of the GaCl3. The presence of two bulky ligands fully hampered the formation of simpler GaCl3 adducts. Instead disproportion reactions of the Lewis acid into cationic [GaCl2]+ and anionic [GaCl4]- unit took place, with the [GaCl2]+ fragment coordinated to the iron center and [GaCl4]- as counterion. In addition to the electronic and steric influences of the ligands on the Lewis basicity and the adduct formation process of iron carbonyl complexes, the influence of the central atom was also investigated. To this end, analogous ruthenium- and osmium carbonyl complexes were prepared and treated with GaCl3, while the ligand sphere was retained with respect to the iron carbonyl complexes. To enable a direct comparison of the M-Ga bond distances, the relative distance (drel) was employed, which accounts for the different covalent radii of the metal centers. Accordingly, the relative Lewis basicity of the different complexes could be evaluated. Here, the same trend as observed for the iron carbonyl complexes was revealed: the more σ-donor ligands are present, the higher the Lewis basicity. Also, the relativly small drel-values of the ruthenium- and osmium carbonyl complexes suggested a higher Lewis basicity as compared to the corresponding iron carbonyl complexes. These results were clearly validated by transfer experiments. In general, several GaCl3 adducts were reacted with carbonyl complexes in CD2Cl2 while a possible transfer of the Lewis acid GaCl3 was monitored by NMR spectroscopy. The results showed that the Lewis acid GaCl3 is transfered always to the complex with a higher number of σ-donor ligands, thus verifying the higher Lewis basictiy of the latter complexes. In addition, the experiments also showed that ruthenium- and osmium carbonyl complexes are more Lewis basic than analogous iron carbonyl complexes while ruthenium and osmium feature a similar Lewis basicity. Additionally, transfer experiments between group 8 carbonyl adducts and the well-known Lewis base [(Cy3P)2Pt] (7) were carried out, which highlighted the strong Lewis basic character of the platinum compound 7. In addition to these mononuclear GaCl3 adducts, several dinuclear group 8 carbonyl complexes were prepared. Therefore, Ag+ was used as Lewis acid instead of GaCl3, which resulted in the generation of the dinuclear adducts 83-86. These results demonstrated that not only main group metals as gallium, but also transition metals can be employed in the syntheses of group 8 carbonyl adducts. It was also possible to prepare the dinuclear complexes 87-89 featuring either chelating or bridging ligands and to study their reactivity towards GaCl3. The main difference between these two classes of ligands is provided by the fact that the M-M disctance is much smaller in complexes bearing chelating ligands for which reason M-M communication remains possible here. By contrast, employing bridging ligands such an interaction can be ruled out completely. Selected group 8 carbonyl complexes were also used in catalysis experiments to evaluate their catalytic activity in the hydrosilylation of benzaldehyde (90) with phenylsilan (91). The study showed that NHC substituted carbonyl complexes enable a significantly higher turnover than phosphine- or isocyanid substituted complexes. In addition, ruthenium- and osmium carbonyl complexes are far less active catalysts in hydrosilylation reactions than corresponding iron carbonyl complexes, despite their higher Lewis basicity. Addition of one equivalent of GaCl3 to the adducts 46, 66 und 76 resulted in chloride abstraction reactions to afford the cationic and dimeric complexes 104-106. Here, two [(Me3P)2(OC)3M-GaCl2]+ units are bridged by Ga-Cl interactions. By contrast, treatment of 46, 66 und 76 with Na[BArCl4] (101) did not result in chloride abstraction reactions. Instead, the dimeric complexes 107-109 were isolated, in which two GaCl3 adducts are connected by two sodium cations. KW - Lewis-Addukt KW - Metallcarbonyle KW - Carbonyladdukte der Gruppe 8 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134211 ER - TY - THES A1 - Wennemann, Benedikt T1 - Untersuchungen zur Synthese und Reaktivität von Übergangsmetallborylenkomplexen der Gruppe 8 T1 - Synthesis and reactivity of group 8 borylene complexes N2 - Zusammenfassung Die vorliegende Arbeit wurde in drei Teilbereiche untergliedert. Der erste Teil beschäftigte sich mit der Untersuchung des anionischen Systems K[(OC)3M(PMe3)(SiR3)] (M = Fe, Ru, Os; R = Me, Et, Ph) und dessen Reaktivität gegenüber Dihalogenboranen. Der zweite Teil widmete sich der Untersuchung der Reaktivät des Eisenbis(borylen)komplexes 45 gegenüber verschiedenen Lewis-Basen und Lewis-Säuren. Im letzten Teil der Arbeit wurde die Insertion von Metallfragmenten der Übergangsmetalle der Gruppe 8 in die M=B-Doppelbindung des Borylenkomplexes 28 untersucht. Durch Umsetzungen der anionischen Osmiumverbindung 64 mit Cl2BDur und Br2BDur konnten die Borylkomplexe 67 und 68 erhalten werden (SCHEMA 56). Die Untersuchungen zum sterischen Einfluss des Silylsubstituenten zeigten, dass die Osmiumkomplexe 65 und 66 mit SiEt3- bzw. SiPh3-Substituenten in die entsprechenden Borylkomplexe überführt werden können, wobei diese Spezies nicht analysenrein isoliert werden konnten. Der Borylkomplex 68 konnte nachfolgend weder unter thermischen Bedingungen, noch unter Verwendung der Lewis-Base Pyridin bzw. des Halogenabstraktionsmittels Na[BArCl4] in einen terminalen Osmiumborylenkomplex umgewandelt werden (Schema 57). Anfängliche Studien zur Reaktivität der anionischen Rutheniumverbindungen 81-83 gegenüber Dihalogenboranen haben sich auf den sterischen Einfluss der borgebundenen Arylsubstituenten konzentriert. Hierdurch konnte gezeigt werden, dass eine Ph-Substitution keine ausreichende Stabilisierung der entstehenden Borylkomplexe liefert. Im Gegensatz dazu erwies sich der sterische Anspruch von Duryl- und Mesitylsubsituenten als ideal für die Bildung stabiler Borylkomplexe, wohingegen die sterische Überfrachtung der Supermesityl- und Terphenylsubstituenten eine Salzeliminierungsreaktion von vornherein verhindert. Der Einfluss des Halogensubstituenten in X2BDur (X = Cl, Br) wurde anhand der Reaktivität gegenüber 81 näher untersucht. In beiden Fällen konnten die entsprechenden Borylkomplexe 84 und 85 isoliert und charakterisiert werden. Da bei der Umsetzung mit Br2BDur auch noch weitere Produkte zu erkennen waren, wurde der sterische Einfluss des Silylsubstituenten in 82 und 83 auf die Produktverteilung bei Reaktion mit Br2BDur untersucht. Es hat sich gezeigt, dass die Wahl der Reaktionsbedingungen einen starken Einfluss auf den Reaktionsverlauf ausübt. So konnte durch regelmäßiges Entgasen der Reaktionslösung der Rutheniumborylenkomplex 86 erhalten werden, während eine thermische Reaktionsführung unter CO-Atmosphäre selektiv zu einer Silylboraneliminierung führte, dessen Produkt indirekt über die Bildung von [(OC)4Ru(PMe3)] (75) nachgewiesen werden konnte (Schema 59). Während die Umsetzung der analogen Eisenspezies K[(OC)3Fe(PMe3)(SiEt3)] (92) mit Cl2BDur lediglich zu Zersetzung führte, konnte im Verlauf der Reaktion mit Br2BDur eine neue, sehr interessante Reaktivität beobachtet werden. Hier war die Salzeliminierungsreaktion mit einer Alkylboraneliminierung verbunden, wobei der intermediär entstehende Silylenkomplex (95) in situ zum dinuklearen, zweifach-verbrückten Bis(silylen)komplex 94 dimerisierte (SCHEMA 60). Unter photolytischen Bedingungen konnte 94 weiter in den dreifach-verbrückten Bis(silylen)komplex 96 überführt werden, welcher den ersten strukturell charaktersierten Komplex dieser Art darstellt. In SCHEMA 61 sind alle relevanten Reaktivitäten des Systems K[(OC)3M(PMe3)(SiR3)] gegenüber X2BDur (X = Cl, Br) zusammen mit den Ergebnissen vorangegangener Arbeiten in einer Übersicht dargestellt. Der zweite Teil dieser Arbeit beschäftigte sich mit der Reaktivität des Eisenbis(borylen)komplexes [(OC)3Fe(=BDur){=BN(SiMe3)2}] (45). Zunächst wurde 45 mit verschiedenen Lewis-Basen umgesetzt. Während die Umsetzungen mit verschiedenen NHCs (IMe, IMes, IDipp) nur zu Zersetzung führte, konnte durch die Reaktion mit cAACMe der außergewöhnliche Komplex 98 isoliert und vollständig charakterisiert werden (SCHEMA 62). Dieser stellt das erste Beispiel für eine intramolekulare Spaltung eines Carbonylliganden in einem einkernigen Komplex dar. Anschließend wurde die Reaktivität von 45 gegenüber den Lewis-Säuren BBr3, AlBr3 und GaBr3 untersucht. Während die Umsetzung von 45 mit AlBr3 lediglich zu Zersetzung führte, konnte mit GaBr3 als Hauptprodukt Br2BDur nachgewiesen werden. In einem möglichen Reaktionsmechanismus ist die Reaktion mit einer 1,2-Addition des GaBr3 unter Bildung eines Gallylkomplexes verbunden, welcher nach Abspaltung von Br2BDur in einen instabilen Gallylenkomplex übergeht (SCHEMA 63). Die Umsetzung von 45 mit BBr3 lieferte bei tiefen Temperaturen den zweikernigen Tris(borylen)komplex 100 (SCHEMA 64), welcher ein Analogon des wohlbekannten Fe2(CO)9 darstellt. Das abschließende Kapitel dieser Arbeit befasste sich mit der Insertion von Metallfragmenten der Gruppe 8-Übergangsmetalle in die M=B-Doppelbindung von [(OC)5Mo=BN(SiMe3)2] (28). Während bei den Umsetzungen von 28 mit [(OC)4Fe(PMe3)] (90) und [(OC)4Ru(PMe3)] (75) die MOLPs 104 und 105 nur NMR-spektroskopisch nachgewiesen werden konnten, war die Isolierung des MOLPs 103 sowie dessen strukturelle Charakterisierung möglich (SCHEMA 65). Bemerkenswert ist hierbei, dass die Reaktion sowohl unter thermischen als auch unter photolytischen Bedingungen durchgeführt werden kann. N2 - Summary The first part of this work focused on the development of a new route to neutral terminal group 8 transition metal borylene complexes. Thus, the reactivity of the anionic system K[(OC)3M(PMe3)(SiR3)] (M = Fe, Ru, Os; R = Me, Et, Ph) towards dihaloboranes was studied in detail. The second part of this work dealt with the reactivity studies of the iron bis(borylene) complex 45 towards common lewis bases and acids. The final part of this work concentrated on the insertion of group 8 transition metal fragments into the M=B double bond of the molybdenum borylene complex 28. The reaction of the anionic osmium complex 64 with X2BDur (X = Cl, Br) resulted in the formation of the osmium boryl complexes 67 and 68 (SCHEME 1). Studies concerning the steric influence of the silyl substituent showed that the osmium species 65 and 66 containing SiEt3 and SiPh3 groups can also be converted into the respective boryl complexes, while the resulting products could not be isolated. All attempts to convert the osmium boryl complex 68 into an osmium borylene complex, either under thermal conditions or by reaction with lewis bases and halide abstracting reagents, consistently failed (SCHEME 2). Initial studies on the reactivity of the anionic ruthenium complexes 81-83 towards dihaloboranes focused on the steric influence of the aryl ligand on boron. The results clearly showed that the small phenyl substituent is not able to efficiently stabilize the resulting boryl complexes. By contrast, the steric demand of the mesityl and duryl ligands appeared to be sufficient to afford stable boryl complexes, while supermesityl and terphenyl substituents were sterically too encumbered even for the initial salt elimination step (SCHEME 3). The influence of the halide substituents in X2BDur (X = Cl, Br) was evaluated by reactivity studies towards 81. In both cases, boryl complexes 84 and 85 could be isolated and fully characterized. However, reaction of 81 with Br2BDur suggested the formation of additional products, for which reason the steric influence of the silyl substituents in 81 and 82 on the nature of the products was studied in detail. It turned out that the reaction conditions have a strong influence on the observed pathways. Thus, periodical degassing favoured the formation of the neutral terminal ruthenium borylene complex 86, while thermal treatment under an atmosphere of CO led to silyl borane elimination (SCHEME 4). While the reaction of the analogous iron species K[(OC)3Fe(PMe3)(SiEt3)] (92) with Cl2BDur resulted in decomposition, reaction with Br2BDur uncovered a new, highly interesting reactivity pattern. Here, initial salt elimination was followed by alkyl borane elimination step while the in situ generated silylene complex readily dimerized to form the dinuclear bis(silylene) complex 94 (SCHEME 5). Photolysis of 94 in solution subsequently converted 94 into the triply-bridged dinuclear complex 96, which is the first structurally characterized example of this class of compounds. The second part of this work focused on the reactivity of the iron bis(borylene) complex [(OC)3Fe(=BDur){=BN(SiMe3)2}] (45). Intitally, 45 was reacted with different lewis bases. While reaction with NHCs (IMe, IMes, IDipp) only resulted in decomposition, reaction with cAACMe enabled the isolation of the uncommon complex 98 (SCHEME 7), which represents the first example of an intramolecular carbonyl cleavage in a mononuclear complex. Next, the reactivity of 45 towards lewis acids BBr3, AlBr3 and GaBr3 was studied. While reaction of 45 with AlBr3 was accompanied by decomposition, reaction with GaBr3 selectively afforded Br2BDur as the main product. A plausible mechanism involves the 1,2-addition of GaBr3 to afford a gallyl species, which subsequently eliminates Br2BDur to generate a labile gallylene complex (SCHEME 8). At low temperatures, the reaction of 45 with BBr3 resulted in the formation of the dinuclear tris(borylene)complex 100 (SCHEME 9), which can be considered an analogue of the well-known [Fe2(CO)9]. The final part of this work was concerned with the insertion of group 8 transition metal fragments into the M=B-double bond of [(OC)5Mo=BN(SiMe3)2] (28). While the reaction of 28 with [(OC)4Fe(PMe3)] (90) and [(OC)4Ru(PMe3)] (75) afforded the MOLPs 104 and 105, which could only be identified by NMR-spectroscopy, the isolation and structural characterization of the MOLP product 103 of the reaction with [(OC)4Os(PMe3)] (59) was feasible (SCHEME 10). Remarkably, this reaction can be carried out both under thermal and photolytic conditions. KW - Borylgruppe KW - Borylenkomplexe KW - Borylkomplexe KW - Übergangsmetallkomplexe Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130755 ER - TY - JOUR A1 - Tacke, R. A1 - Bentlage, A. A1 - Sheldrick, W. S. A1 - Ernst, L. A1 - Towart, R. A1 - Stoepel, K. T1 - Sila-Pharmaka, 24. Mitt. [1]. Sila-Analoga von Nifedipin-ähnlichen 4-Aryl-2.6-dimethyl-1.4-dihydropyridin- 3.5-dicarbonsäure-dialkylestern, II. T1 - Sila-Drugs, 24th Communication [1]. Sila-Analogues of Nifedipine-Like Dialkyl 4-Aryl-2,6-dimethyl-1,4-dihydropyridine- 3,5-dicarboxylates, II. JF - Zeitschrift für Naturforschung B N2 - In the course of systematic studies on sila-substituted drugs the nifedipine-like 1.4-dihydropyridine derivatives 4a, 4b and 4c were prepared and investigated with respect to sila-substitution effects. By X-ray diffraction analyses 4a, 4b and 4c were found to be isostructural. The C/Si-analogues exhibit similar spasmolytic activities (in vitro, guinea pig ileum), comparable with that of nifedipine. However, the compounds differ substantially in their in vivo activity, as measured by the antihypertensive effect on the renal-hypertensive rat. The experimental results are discussed with respect to the carbon/silicon exchange. KW - sila-analogues of Nifedipine derivatives KW - X-ray KW - pharmacological activity KW - structure-activity relationships Y1 - 1982 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-128381 VL - 37 IS - 4 ER - TY - JOUR A1 - Tacke, R. A1 - Strecker, M. A1 - Sheldrick, W. S. A1 - Heeg, E. A1 - Berndt, B. A1 - Knapstein, K. M. T1 - Sila-Pharmaka, 14. Mitt. Darstellung und Eigenschaften sowie Kristall-und Molekülstruktur von Sila-Difenidol JF - Zeitschrift für Naturforschung B N2 - Sila-difenidol (6b), a sila-analogue of the drug difenidol (6a), was synthesized according to Scheme 1. 6b and its new precursors 3 and 5 were characterized by their physical and chemical properties, and their structures confirmed by elementary analyses, 1H NMR and mass spectroscopy. 6 b crystallizes orthorhombic \(P2_12_12_1\) with a = 11.523(1), b = 14.366(4), c = 11.450(1) Å, Z = 4, \(D_{ber} = 1.14 gcm^{-3}\). The structure was refined to R = 0.050 for 1897 reflexions. A strong nearly linear intramolecular O-H···N hydrogen bond of 2.685 Å is observed. The anticholinergic, histaminolytic and musculotropic spasmolytic activities of 6 a and 6 b are reported. KW - sila-difenidol KW - syntheses KW - crystal structure KW - molecular structure KW - biological activity Y1 - 1979 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-128391 VL - 34 IS - 9 ER - TY - JOUR A1 - Tacke, Reinhold A1 - Linoh, Haryanto A1 - Attar-Bashi, Moayad T. A1 - Sheldrick, William S. A1 - Ernst, Ludger A1 - Niedner, Roland A1 - Frohnecke, Joachim T1 - Sila-Pharmaka, 26. Mitt. [1] Darstellung und Eigenschaften potentiell curarewirksamer Silicium-Verbindungen, III T1 - Sila-Pharmaca, 26th Communication [1] Preparation and Properties of Silicon Compounds with Potential Curare-Like Activity, III JF - Zeitschrift für Naturforschung B N2 - The potentially curare-like silicon compounds 8a- 8f were synthesized and investigated with respect to their structure-activity relationships. The conformations of the compounds in the solid state and in solution were studied by X-ray diffraction analysis (8a- 8e) and IR NMR spectroscopy (8a- 8f), respectively. The muscle relaxing properties of 8a- 8f were investigated on the mouse. The observed structure-activity relationships are not in accordance with the classical "14 Å model" for neuromuscular blocking agents. KW - structure-activity relationships KW - X-ray KW - curare-lik activity KW - silicon compounds KW - conformational anaylses Y1 - 1982 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-128402 VL - 37 IS - 11 ER - TY - JOUR A1 - Tacke, Reinhold A1 - Lange, Hartwig A1 - Sheldrick, William S. A1 - Lambrecht, Günter A1 - Moser, Ulrich A1 - Mutschler, Ernst T1 - Sila-Pharmaka, 31. Mitt. [1] Synthese, Struktur und pharmakologische Eigenschaften von Diphenyl(2-piperidinoethoxymethyl)silanol und seinem Kohlenstoff-Analogon T1 - Sila-Pharmaca, 31 th Communication [1] Synthesis, Structure, and Pharmacological Properties of Diphenyl(2-piperidinoethoxymethyl)silanol and its Carbon Analogue JF - Zeitschrift für Naturforschung B N2 - In the course of systematic investigations on sila-substituted parasympatholytics the diphenyl(2-aminoethoxymethyl)silanols 3b and 4b (and its carbon analogue 4a) were synthesized and characterized by their physical and chemical properties. In the solid state 4a and 4b form strong O-H---N hydrogen bonds, which are intramolecular (4a) and intermolecular (4b), respectively. 4a and 4b were found to be weak antimuscarinic agents (4b >4a) and strong papaverine-like spasmolytics (4a ≈4b). KW - antimuscarinic and papaverine-like activity KW - sila-substitution KW - crystal and molecular structure Y1 - 1983 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-128410 VL - 38 IS - 6 ER - TY - JOUR A1 - Tacke, Reinhold A1 - Lange, Hartwig A1 - Bentlage, Anke A1 - Sheldrick, William S. A1 - Ernst, Ludger T1 - 2.2.5.5-Tetraorganyl-1.4-dioxa-2.5-disilacyclohexane/2,2,5,5-Tetraorganyl-1,4-dioxa-2,5-disilacyclohexanes JF - Zeitschrift für Naturforschung B N2 - The 2,2,5,5-tetraorganyl-1,4-dioxa-2,5-disilacyclohexanes 2a-2c were prepared by condensation of the corresponding (hydroxymethyl)diorganylsilanes 1 a-1 c. The constitution of the heterocycles was confirmed by elemental analyses, cryoscopic measurements, mass spectrometry, and NMR-spectroscopic \((^1H, ^{13}C)\) investigations. The molecular structure of 2 b was determined by X-ray diffraction analysis. KW - 1,4-Dioxa-2 KW - 5-disila-cyclohexane ring system KW - synthesis KW - structure Y1 - 1983 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-128423 VL - 38 IS - 2 ER - TY - JOUR A1 - Waelbroeck, M. A1 - Camus, J. A1 - Tastenoy, M. A1 - Lambrecht, G. A1 - Mutschler, E. A1 - Kropfgans, M. A1 - Sperlich, J. A1 - Wiesenberger, F. A1 - Tacke, R. A1 - Christophe, J. T1 - Thermodynamics of antagonist binding to rat muscarinic \(M_2\) receptors: antimuscarinics of the pridinol, sila-pridinol, diphenidol and sila-diphenidol type JF - British Journal of Pharmacology N2 - 1 We studied the effect of temperature on the binding to rat heart \(M_2\) muscarinic receptors of antagonists related to the carbon/silicon pairs pridinol/sila-pridinol and diphenidol/sila-diphenidol (including three germanium compounds) and six structurally related pairs of enantiomers [(R)- and (S)-procyclidine, (R)- and (S)-trihexyphenidyl, (R)- and (S)-tricyclamol, (R)- and (S)-trihexyphenidyl methiodide, (R)- and (S)-hexahydro-diphenidol and (R)- and (S)-hexbutinol]. Binding affinities were determined in competition experiments using \([^3H]\)-N-methyl-scopolamine chloride as radioligand. The reference drugs were scopolamine and N-methyl-scopolamine bromide. 2 The affinity of the antagonists either increased or decreased with temperature, van 't Hoff plots were linear in the 278–310°K temperature range. Binding of all antagonists was entropy driven. Enthalpy changes varied from large negative values (down to \(−29 kJ mol^{−1}\)) to large positive values (up to \(+ 30 kJ mol^{−1}\)). 3 (R)-configurated drugs had a 10 to 100 fold greater affinity for \(M_2\) receptors than the corresponding (S)-enantiomers. Enthalpy and entropy changes of the respective enantiomers were different but no consistent pattern was observed. 4 When silanols \((R_3SiOH)\) were compared to carbinols \((R_3COH)\), the affinity increase caused by C/Si exchange varied between 3 and 10 fold for achiral drugs but was negligible in the case of chiral drugs. Silanols induced more favourable enthalpy and less favourable entropy changes than the corresponding carbinols when binding. Organogermanium compounds \((R_4Ge)\) when compared to their silicon counterparts (R4Si) showed no significant difference in affinity as well as in enthalpy and entropy changes. 5 Exchange of a cyclohexyl by a phenyl moiety was associated with an increase or a decrease in drug affinity (depending on the absolute configuration in the case of chiral drugs) and generally also with a more favourable enthalpy change and a less favourable entropy change of drug binding. 6 Replacement of a pyrrolidino by a piperidino group and increasing the length of the alkylene chain bridging the amino group and the central carbon or silicon atom were associated with either an increase or a decrease of entropy and enthalpy changes of drug binding. However, there was no clear correlation between these structural variations and the thermodynamic effects. 7 Taken together, these results suggest that hydrogen bond-forming OH groups and, to a lesser extent, polarizable phenyl groups contribute significantly to the thermodynamics of interactions between these classes of muscarinic antagonists and \(M_2\) muscarinic receptors. KW - entropy KW - binding KW - M2 muscarinic receptors KW - thermodynamics KW - van 't Hoff plot KW - enthalpy Y1 - 1993 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-128439 VL - 109 IS - 2 ER - TY - THES A1 - Schönfeld, Fabian T1 - Solvensfreie Synthese von Übergangsmetall-azolat- und -azin-Netzwerken mit Struktureigenschaftsbeziehungen bezüglich Polarisierbarkeit und sorptionsabhängiger Lumineszenz T1 - Solvent-free Synthesis of transition metal azolate and azine frameworks with structure/property relations regarding polarisability and sorption-dependent luminescence N2 - Diese Arbeit befasst sich mit der Verwendung einer solvensfreien Synthesese zur Darstellung koordinationspolymerer Verbindungen basierend auf den 3d-Übergangsmetallen Mn, Fe, Co und Zn und N-heterozyklischen, aminischen Ligandenschmelzen. Die eingesetzten Metalle wurden entweder in ihrer elementaren Form in einer bereits bekannten, redox-basierten Synthese oder als Metallchloride in einer adduktbasierten Synthese verwendet. Synthesen mit den Liganden Imidazol (ImH), Pyrazol (PzH), Benzimidazol (bzImH), 1,2,3-Triazol (1,2,3-TzH), 1,2,4,-Triazol (1,2,4-TzH) und Piperazin (pipz) führten zu verschiedenen neuen Verbindungen und Kristallstrukturen, speziell bei Verwendung des Liganden pipz. Die erhaltenen Produkte wurden für Untersuchungen von Struktureigenschafts-beziehungen hinsichtlich des Polarisationsverhaltens und im Falle der 1,2,3-Triazolate für eine Untersuchung von Photolumineszenzeigenschaften in Abhängigkeit von Physisorptionsprozessen verwendet. Unter den Piperazin-Verbindungen findet sich eine starke Varianz im Bereich des polymeren Charakters und des Vernetzungsgrades, welcher von Komplexen (null-dimensional) wie [CoCl2(pipz)] (26) and [ZnCl2(pipz)] (27) über Stränge (eindimensional) wie 1∞[ÜMCl2(py)2(pipz)] (ÜM = Mn (29), Fe (30), Co (31)) bis hin zu Netzen (zweidimensional) wie 2∞[Fe2Cl4(pipz)3]∙(pipz) (25) und Gerüsten (dreidimensional) wie 3∞[FeCl2(pipz)] (32) reicht. Thermoanalyse und darauf basierende Veränderungen in den Reaktionsbedingungen ermöglichen es, die Zusammenhänge zwischen den einzelnen Phasen aufzuzeigen und ihre thermodynamischen Stabilitäten zu untersuchen, was nicht nur für die Piperazin-Verbindungen, sondern auch für andere Systeme gelang, von denen die größte Gruppe die Imidazolate des Typs 3∞[ÜM3(Im)6(ImH)2] (ÜM = Mn (1), Fe (2), Co (3)) waren. Der erfolgreiche Zusatz von geringen Mengen Mn2+ in das MOF 3∞[Zn(1,2,3-Tz)2] (21) führt zur Bildung der Phase 3∞[Zn0,9Mn0,1(1,2,3-Tz)2] (22) und zur Aktivierung von Photolumineszenz unter Beibehaltung von Mikroporosität. Das erhaltene lumineszierende, mikroporöse Gerüst wurde als Modellsystem für die Analyse von Lumineszenzänderungen während der Physisorption verschiedener Analysegase und bei unterschiedlichen Temperaturen verwendet. Die erhaltenen Ergebnisse können eine wichtige Rolle bei der Charakterisierung potentieller Sensormaterialien spielen und sind weiterhin ein möglicher Ausgangspunkt für mechanistische Überlegungen bei diesen hochinteressanten Struktureigenschaftsbeziehungen. Die erfolgreiche Redoxreaktion elementarer Metalle mit den Liganden ImH, PzH, bzImH und 1,2,3-TzH erlaubte eine Untersuchung dielektrischer Eigenschaften einer Gruppe von verwandten Verbindungen bezüglich verschiedener Probenformen (Pulverschüttungen gegenüber gepressten Pellets) und Strukturmerkmale wie Rigidität der Kristallstrukturen. Diese Eigenschaften wurden darüber hinaus auch temperaturabhängig in einem Bereich von -100 °C bis 150 °C untersucht. Weiterhin konnte mit Untersuchungen an den MOFs 3∞[ÜM(1,2,3-Tz)2] (ÜM = Mn (18), Fe (19), Co (20), Zn (21)) auch ein Beitrag zu einem Feld der MOF-Chemie geleistet werden, welches bereits stark diskutiert wurde, jedoch bislang nur sehr schwach erforscht ist. N2 - This work elaborates on the use of solvent free approach towards the generation of coordination polymers based on the 3d transition metals Mn, Fe, Co and Zn by use of N-heterocyclic amine ligand melts. Metals employed were either used as elemental metals in a redox-based approach derived from previous works or in the form of metal chlorides in an adduct-based strategy. Products obtained from reactions with the ligands imidazole (ImH), pyrazole (PzH), benzimidazole (bzImH), 1,2,3-triazole (1,2,3-TzH), 1,2,4-triazole (1,2,4-TzH) and piperazine (pipz) led to a variety of new compounds and crystal structures, especially with the ligand piperazine. The obtained products were subsequently used for studies in structure-property relations in the fields of polarizability and in the case of the triazolate frameworks for investigations into the dependence between luminescent properties and physisorption properties. Among these newly discovered and characterized compounds, the polymeric character and degree of linkage varies from complexes (zero-dimensional) such as [CoCl2(pipz)] (26) and [ZnCl2(pipz)] (27), to strands (one-dimensional) such as 1∞[TMCl2(py)2(pipz)] (TM = Mn (29), Fe (30), Co (31)), nets (two-dimensional) such as 2∞[Fe2Cl4(pipz)3]∙(pipz) (25) and frameworks (three-dimensional) such as 3∞[FeCl2(pipz)] (32). Thermal analysis and subsequent changes in reaction conditions were able to show the relations between the obtained products and their thermodynamic stability not only in the aforementioned products, but also for a number of previously known compounds, most notably the imidazolates 3∞[TM3(Im)6(ImH)2] (TM = Mn (1), Fe (2), Co (3)). Introducing small quantities of Mn2+ into the metal organic framework (MOF) 3∞[Zn(1,2,3-Tz)2] (21) leads to the compound 3∞[Zn0,9Mn0,1(1,2,3-Tz)2] (22) and activation of photoluminescent properties whilst retaining initial microporosity. This luminescent, microporous framework was used as a model system for the analysis of changes in photoluminescence during physisorption of several analyst gases at different temperatures. The obtained results could play a highly important role for the characterization of potential sensor materials and can be employed as a step-stone for mechanistic considerations in these highly interesting structure-property relations. The successful redox-reactions of elemental metals with the ligands ImH, PzH, bzImH and 1,2,3-TzH allowed for an investigation of dielectric properties, comparing the influence of sample composition (compacted powders vs. mechanically prepared pellets) as well as structural features such as rigidity of crystal structures and their dimensional linkage on the permittivity of a family of compounds with very similar compositions. Additionally, these properties were also analysed with regards to changes in temperatures ranging from -100 °C and up to 150 °C. In this particular instance, the analysis of dielectric properties conducted on the MOFs 3∞[TM(1,2,3-Tz)2] (TM = Mn (18), Fe (19), Co (20), Zn (21)) contributes to another highly important field of properties in MOF chemistry, which has been discussed for quite some time, but is still underdeveloped. KW - Festkörperchemie KW - Polymerkomplexe KW - Lumineszenz KW - Mikroporosität KW - Polarisierbarkeit KW - Festkörperchemie KW - Koordinationspolymere KW - Lumineszenz KW - Mikroporosität KW - Polarisierbarkeit Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-115035 ER - TY - THES A1 - Fischer, Markus T1 - Synthese neuartiger siliciumorganischer Wirkstoffe sowie siliciumhaltiger Synthese-Bausteine unter Verwendung der 4-Methoxyphenyl-, 2,6-Dimethoxyphenyl- und 2,4,6-Trimethoxyphenyl-Schutzgruppe T1 - Synthesis of novel organosilicon drugs and silicon-containing building blocks using the 4-methoxyphenyl, 2,6-dimethoxyphenyl, and 2,4,6-trimethoxyphenyl protecting group N2 - Synthese siliciumhaltiger Wirkstoffe und Synthese-Bausteine des 4-Silapiperidin-Typs: Im Rahmen der systematischen Untersuchungen unseres Arbeitskreises zur C/Si-Bioisosterie wurde für bereits bekannte σ-Rezeptor-Antagonisten eine neue verbesserte Syntheseroute entwickelt, wobei die Endprodukte jeweils in einer sechsstufigen Synthese dargestellt und als entsprechende Hydrochloride isoliert wurden. Ein weiteres Teilprojekt der vorliegenden Arbeit betraf die Entwicklung einer Syntheseroute zur Darstellung von Sila-L-741,626, dem Sila-Analogon des selektiven D2-Dopamin-Rezeptorantagonisten L-741,626. In einem weiteren Teilprojekt der vorliegenden Arbeit wurde ein neuer, säurefreier Weg zu 4 Silapiperidin-Bausteinen mit NH-Funktion entwickelt, der eine Staudinger-Reaktion als ringschließenden Syntheseschritt beinhaltet. Am Beispiel einer Modellverbindung, die in zwei alternativen jeweils fünfstufigen Synthesen ausgehend von Dichlordiphenylsilan dargestellt und als Hydrochlorid isoliert wurde, konnte die neue Syntheseroute erfolgreich ausgearbeitet werden. Die anhand der Modellverbindung erfolgreich getestete Syntheseroute konnte im Folgenden auf ein Zielmolekül angewendet werden, das anstatt einer inerten Phenyl-Gruppe die säurelabilere 4-Methoxyphenyl- (MOP-) Gruppe trägt. Synthese siliciumhaltiger Wirkstoffe und Synthese-Bausteine des 4-Silacyclohexan-1-on- und (4-Silacyclohexan-1-yl)amin-Typs: Im Zusammenhang mit unseren systematischen Untersuchungen zur C/Si-Bioisosterie wurde Sila-pramiverin dargestellt. Dies gelang in einer vierstufigen Synthese, ausgehend von Dichlordiphenylsilan. Im Zuge dieser Synthese fand Brown’s DCME-Prozess Anwendung, um in einer Eintopf-Reaktion das entsprechende 4-Silacyclohexan-1-on und daraus durch anschließende reduktive Aminierung mit Isopropylamin Sila-pramiverin erstmals darzustellen. Analog zur Synthese von Sila-pramiverin konnten ebenfalls Synthese-Bausteine des 4 Silacyclohexan-1-on-Typs sowie des (4-Silacyclohexan-1-yl)amin-Typs unter Verwendung der 4 Methoxyphenyl- (MOP ), 2,6-Dimethoxyphenyl- (DMOP-) bzw. 2,4,6-Trimethoxyphenyl- (TMOP-) Schutzgruppe dargestellt werden. In einer Machbarkeitsstudie wurde zudem unter selektiver Abspaltung der 4 Methoxyphenyl- (MOP ), 2,6-Dimethoxyphenyl- (DMOP-) bzw. 2,4,6-Trimethoxyphenyl- (TMOP-) Schutzgruppe der phenylierten 4 Silacyclohexan-1-one mittels Chlorwasserstoff das entsprechende Chlorsilan dargestellt. Synthese siliciumhaltiger Synthese-Bausteine des 4-Silatetrahydropyran-Typs: Eine fast gänzlich unerforschte Klasse siliciumhaltiger Heterocyclen stellen 4 Silatetrahydropyrane dar. Im Rahmen der vorliegenden Arbeit konnte zunächst anhand einer Modellstudie das 4,4-Diphenyl-4-silatetrahydropyran dargestellt werden. Die für die Modellverbindung ausgearbeitete Syntheseroute konnte schließlich auf die Synthese der 4 Methoxyphenyl- (MOP-) und 2,6-Dimethoxyphenyl- (DMOP-) substituierten 4 Silatetra¬hydropyrane übertragen werden. Diese konnten jeweils in einer vierstufigen Synthese dargestellt werden. Lediglich die Synthese der 2,4,6-Trimethoxyphenyl- (TMOP-) substituierten 4 Silatetra¬hyropyrane gelang aufgrund der Instabilität der mesylierten Zwischenstufen nicht. N2 - Synthesis of silicon containing drugs and building blocks of the 4-silapiperidine type: In context with the systematic studies of our research group on C/Si bioisosterism, a novel and improved synthetic route for already reported σ receptor antagonists were established in six-step syntheses, and the final products were isolated as hydrochlorides. Another goal of this work concerned the development of a synthetic route for sila L 741,626, a silicon analogue of the selective D2 dopamin receptor antagonist L 741,626. In another project of this work, a novel acid-free method for the synthesis of 4-silapiperidine building blocks containing a NH function has been developed, using the Staudinger reaction as the key step. As a proof of principle, a model compound, isolated as hydrochloride, could be prepared in two alternative five-step syntheses, starting from dichlorodiphenylsilane. The novel synthetic route for the preparation of the model compound could then be sucessfully applied to the synthesis of a novel target molecule containing the more acid-labile 4 methoxyphenyl (MOP) group instead of the relatively inert phenyl group. Synthesis of silicon containing drugs and building blocks of the 4-silacyclohexan-1-one and the (4-silacyclohexan-1-yl)amine type: In context with our systematic studies on C/Si bioisosterism, sila-pramiverin was synthesized in a four-step synthesis, starting from dichloro¬diphenylsilane. In the course of the synthesis of the 4 silacyclohexan-1-one intermediate, a one-pot synthesis by using Brown’s DCME process was applied. Subsequent reductive amination with isopropylamine led to sila-pramiverin. Analogously to the synthesis of sila-pramiverin, building blocks of the 4 silacyclo¬hexan-1-one type and the (4-silacyclohexan-1-yl)amine type were synthesized by using the 4-methoxyphenyl (MOP), 2,6-dimethoxyphenyl (DMOP), or 2,4,6-trimethoxyphenyl (TMOP) protecting groups. As a proof of principle, the phenyl-substituted 4 silacyclo¬hexan-1-ones could then be transformed into the corresponding chlorosilane by selective cleavage of the 4-methoxyphenyl (MOP), 2,6-dimethoxyphenyl (DMOP), or 2,4,6-trimethoxyphenyl (TMOP) protecting group by using hydrogen chloride. Synthesis of silicon containing building blocks of the 4-silatetrahydropyrane type: 4-Silatetrahydropyranes represent a nearly unexplored class of silicon containing heterocycles. Within the scope of this work, the model compound 4,4-diphenyl-4-silatetrahydropyrane could be synthesized in a three-step synthesis, starting from dichlorodiphenylsilane. This synthetic route to the model compound could then also be applied successfully to the 4-methoxyphenyl (MOP) and 2,6-dimethoxyphenyl (DMOP) substituted 4-silatetrahydropyranes. However, the syntheses of the 2,4,6-trimethoxyphenyl (TMOP) substituted 4 silatetrahydropyranes remained unsuccessful due to the instability of their mesylated precursors. KW - Silicium KW - Wirkstoff KW - Schutzgruppe KW - Sila-Substitution KW - Sila-Wirkstoff KW - Synthese-Baustein KW - Siliciumorganische Verbindungen Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-113987 ER - TY - THES A1 - Ferkinghoff, Katharina T1 - Reaktivitätsstudien an Metalloborylenkomplexen und Eisen-substituierten Borirenen T1 - Reactivity studies of metalloborylene complexes and Iron-substituted borirenes N2 - D) Zusammenfassung Im Rahmen der vorgestellten Doktorarbeit wurde die Reaktivität des Metalloborylenkomplexes [{(η5-C5Me5)Fe(CO)2}(μ-B){Cr(CO)5}] (43) gegenüber weiterer Übergangsmetallfragmente, verschiedener Mono- bzw. Dialkine sowie unterschiedlicher Isonitrile untersucht. Mittels spektroskopischer und struktureller Befunde der dabei synthetisierten Verbindungen konnten bekannte Sachverhalte bestätigt und neue Erkenntnisse über die Metall–Bor-Bindung erhalten werden. Der Boridokomplex [{(η5-C5Me5)Fe(CO)2}(μ-B){W(CO)5}] (73) konnte auf dem klassischen Weg einer doppelten Salzeliminierungsreaktion des Dichloroborylkomplexes 11 und dem Metallcarbonylat Na2[W(CO)5] in einer Ausbeute von 46% dargestellt werden (Abbildung 96). Abbildung 96: Synthese des Boridokomplexes 73. Verbindung 73 weist die für terminale Borylenkomplexe charakteristische, lineare FeBW Einheit sowie ein extrem tieffeldverschobenes 11B{1H}-NMR-Signal auf. Es gelang ebenfalls, die Metalloborylen-Einheit {(η5-C5Me5)Fe(CO)2(B:)} aus 43 auf ein weiteres Übergangsmetall-Fragment zu übertragen. Dieser intermetallische Transfer bietet neben der klassischen Salzeliminierungsreaktion einen neuen Syntheseweg für Boridokomplexe. Die Umsetzung von 43 mit dem Übergangsmetallkomplex [(η5 C5H5)(H)W(CO)3] resultiert in 52%-iger Ausbeute in der Bildung des Hydrid-verbrückten Boridokomplexes [{(η5-C5Me5)(CO)2Fe}(µ-B)(µ-H){CpW(CO)2}] (74) (Abbildung 97). Röntgenkristallographische Untersuchungen sowie NMR-spektroskopische Daten belegen die verbrückende Position des Hydridoliganden über die W–B-Bindung der linearen FeBW Einheit. Abbildung 97: Synthese des hydrid-verbrückten Boridokomplexes 74. Aus den Umsetzungen der Hydrid-verbrückten Boridokomplexe [{(η5-C5Me5)(CO)2Fe} (µ B)(µ-H){CpM(CO)2}] (M = W (74), Mo (75)) mit einem Äquivalent des Metall-basischen Platin-(0)-Komplexes [Pt(PCy3)2] konnten die Trimetallo-Boridokomplexe 76 und 77 in Ausbeuten von 27% und 33% isoliert und vollständig charakterisiert werden (Abbildung 98). Sie weisen die für Metall-basenstabilisierten Boridokomplexe typische T-förmige Struktur mit einem verbrückenden Hydridoliganden zwischen der M–Pt-Bindung sowie einer verbrückenden Carbonylgruppe zwischen der Fe–Pt-Bindung auf. Des Weiteren zeigte sich, dass in beiden Verbindungen die M–B-Bindungsabstände vergleichbar mit denen anderer Boridokomplexe sind, die Pt–B-Bindungsabstände jedoch gegenüber Platin-Borylkomplexen deutlich verlängert sind. Dieser Befund wurde bereits für andere Metall-Basen-Addukte beschrieben. Mit einem weiteren Metallbasen-Fragment gelang es die noch freie Koordinationsstelle am Bor-Zentrum zu besetzen. Hierzu wurden die Verbindungen 76 und 77 mit einem zweiten Äquivalent des niedervalenten Metallkomplexes [Pt(PCy3)2] umgesetzt (Abbildung 98). Folglich konnten die tetranuklearen Komplexe 78 und 79 in Ausbeuten von 44% und 30% isoliert werden. Die 1H-NMR-Kopplungsschemata des Hydridoliganden bestätigen seine verbrückende Position zwischen dem Metall (Wolfram, Molybdän) und Platin. Obwohl die Festkörperstruktur von 79 zwei unterschiedliche {Pt(PCy3)}-Fragmente aufweist, zeigt das 31P{1H}-NMR-Spektrum in Lösung nur ein Signal. Somit liegt bei Raumtemperatur in Lösung eine Fluktuation der verbrückenden Carbonylgruppe sowie des Hydridoliganden vor. Entgegen den Erwartungen nimmt Verbindung 79 eine stark gekippte Anordnung ein und nicht, wie die meisten bekannten Tetrametallo-Boridokomplexe eine quadratisch-planare Koordination (Anti-van`t Hoff-Le Bel-Verbindungen). Abbildung 98: Reaktivität des hydrid-verbrückten Boridokomplexes 74 gegenüber [Pt(PCy3)2]. Des Weiteren gelang es die Metalloborylen-Einheit {(η5-C5Me5)Fe(CO)2(B:)} aus 43 auf einige unterschiedlich substituierte Alkine zu übertragen und die Verbindungsklasse der bislang erst zwei bekannten Eisen-substituierten Borirene auf die Verbindungen 81-86 zu erweitern, welche in Ausbeuten von 24-61% isoliert werden konnten (Abbildung 99). Abbildung 99: Synthese der Ferroborirene 81-86. Das charakteristische Strukturmerkmal dieser Verbindungsklasse stellt der dreigliedrige Boracyclus dar, dessen Verkürzung der BC bzw. Verlängerung der C–C-Bindungen gegenüber B–C-Einfach- bzw. C=C Doppelbindungen auf eine Delokalisierung der π Elektronen über ein bindendes Molekülorbital bestehend aus den p-Orbitalen der Ring-Atome hindeuten. Durch den thermisch induzierten Borylentransfer und drastische Reaktionsbedingungen gelang es erstmals, ein Ferro(bis)boriren (87) vollständig zu charakterisieren. Die Umsetzung von 43 mit verschiedenen Dialkinen führte zur Bildung der Ferro(bis)borirene 87 89 (Abbildung 100). Abbildung 100: Synthese der Ferro(bis)borirene 87-89. Aufgrund der Verkürzung der C–C-Einfachbindung zwischen den beiden Dreiringen (1.411(3) Å) kann in dem Ferro(bis)boriren 87 von einer Delokalisation der π Elektronen über beide Boracyclen hinweg ausgegangen werden. Zahlreiche Versuche zur Spaltung der Fe–B-Bindung des Ferroborirens 63 mit H2, Br2 oder HCl, um Zugang zu Borirene mit veränderten Eigenschaften zu erhalten, waren nicht erfolgreich. Auch einige Quarternisierungsversuche des Ferroborirens 63 mit den weniger basischen Pyridinderivaten (3,5-Lutidin, 4 Picolin, 4-(Dimethylamino)-pyridin) waren nicht erfolgreich. Die Reaktionskontrolle mittels 11B{1H} NMR-Spektroskopie zeigte immer nur das Eduktsignal bei δ = 63.4 ppm. Sowohl nach dem Erhitzen für mehrere Stunden auf 80 °C sowie durch Abkühlen der Reaktionslösung war keine Reaktion zu erkennen. Die Umsetzung von 63 mit einem cyclischen Alkylaminocarben lieferte ebenfalls keine Reaktion. Weitere Untersuchungen zur Reaktivität von 63 ergaben, dass es durch die Umsetzung von 63 mit zwei Äquivalenten eines N-heterocyclischen Carbens zu einer heterolytischen FeB Bindungsspaltung unter Bildung der Boroniumionen 90-92 kommt (Abbildung 101). Auf diese Weise konnte das erste Borironium-Salz eines Borirens erhalten werden. Abbildung 101: Synthese der Boroniumionen 90-92. Durch die Quarternisierung des Boratoms ist in den Borironiumionen eine Delokalisierung der zwei π Elektronen über ein bindendes Molekülorbital bestehend aus den p-Orbitalen der Ring-Atome nicht mehr möglich, dies spiegelt sich in der Verlängerung der BC- sowie Verkürzung der C–C-Bindungen im Vergleich zur Ausgangsverbindung wieder. Ein weiteres Projekt dieser Arbeit umfasste Untersuchungen zur Reaktivität von Manganborylkomplexen gegenüber Isonitrilen. Es zeigte sich, dass durch Umsetzung des Mangan(dibromboryl)komplexes (94) mit Cyclohexyl- bzw. tert-Butylisonirtil die Lewis Säure-Base-Addukte 95 und 96 gebildet werden. Abbildung 102: Synthese der Lewis-Säure-Base-Addukte 95und 96. Im Gegensatz hierzu kommt es bei der Umsetzung des Phosphan-substituierten Manganborylkomplexes 98 mit Cyclohexyl- bzw. tert-Butylisonirtil zu keiner Adduktbildung, sondern zu einer Insertion zweier Isonitrile in die MnB Bindung unter Bildung eines carbenartigen Mangankomplexes und einem viergliedrigen Ring bestehend aus dem Kohlenstoff- und dem Stickstoffatom eines Isonitrils, dem Kohlenstoffatom des zweiten Isonitrils sowie dem Boratom der {BCl2}-Gruppe. Des Weiteren wurden zwei Carbonylgruppen durch Isonitrile ausgetauscht (Abbildung 103). Abbildung 103: Synthese der Isonitrilinsertionskomplexe 99 und 100. Das letzte Projekt dieser Arbeit umfasste die Untersuchung der Reaktivität von 43 gegenüber Isonitrilen. Während die Umsetzung des Boridokomplexes 43 mit tert-Butyl- bzw. Mesitylisonitril keine selektive Reaktion lieferte, führte die Umsetzung von 43 mit drei Äquivalenten Cyclohexylisonitril zu einer Insertion der Isonitrile in beide MB-Bindungen und somit zur Bildung der [2.3] Spiro-Verbindung 103. Da der Metalloborylenkomplex 43 formal eine Eisenboryl- und eine Chromborylen-Funktionalität aufweist, werden dementsprechend in dieser Reaktion zwei unterschiedliche Reaktivitäten in einem Molekül vereinigt. Diese sind zum einen vergleichbar zu der des Eisen(dichlorboryl)komplexes 11 und zum anderen zu der des Chrom(aminoborylen)komplexes 17. Abbildung 104: Synthese der [2,3]-Spiroverbindung 103. Bei der Umsetzung von 43 mit Supermesitylisonitril konnte anhand geeigneter Kristalle für die Röntgenstrukturanalyse das Chrom-Spaltungsprodukt [(OC)4(Mes*NC)2Cr] (109) erhalten werden. Dieser Befund sowie quantenchemische Rechnungen sprechen für die Bildung von 115 (Abbildung 105). Abbildung 105: Umsetzung von 43 mit Mes*NC. In den Untersuchungen zu der Isonitril-insertierten [2.3] Spiro-Verbindung 103 konnte zum einen die Reversibilität der Isonitrilinsertion in die FeB-Bindung durch Umsetzung mit der starken Lewis-Säure Tris(pentafluorphenyl)boran unter der Bildung des Lewis-Säure-Base-Addukts (C5F5)3B−CNtBu vermutet werden. Weitere Reaktivitätsuntersuchungen zu 103 zeigen, dass durch die HCl-Addition an die NB Bindung des dreigliedrigen Rings der Eisencarbenkomplex 118 gebildet wird (Abbildung 106). Dieser Befund deutet darauf hin, dass es sich bei der B–N-Bindung in 103 eher um eine dative N→B-Wechselwirkung handelt und diese somit leichter gespalten werden kann als die B–C-Einfachbindung des dreigliedrigen Rings. Abbildung 106: Synthese der Verbindung 118. N2 - E) Summary This work aims to investigate the reactivity of the metalloborylene complex [{(η5 C5Me5)Fe(CO)2}(μ-B){Cr(CO)5}] (43) towards other transition metal complexes, a variety of mono- and dialkynes, and several isonitriles. Thereby, discussion of spectroscopical and structural data of the prepared compounds confirms known facts and helps to determine the nature of the metal–boron bond. According to a well-established synthetic protocol, the borido complex [{(η5 C5Me5)Fe(CO)2}(μ-B){W(CO)5}] (73) could be prepared by a double salt-elimination reaction of the dichloroboryl compound 11 and the corresponding metal carbonylate Na2[W(CO)5] in isolated yields of 46% (Figure 107). Figure 107: Synthesis of the borido complex 73. As observed for related metalloborylene species, the borido complex 73 shows the typical linear FeB–W moiety (178.5(2)°) as well as a low-field-shifted 11B{1H} NMR (δ = 204.6 ppm) resonance. The borido complex 43 can be employed as a synthetic source of the metalloborylene fragment {(η5 C5Me5)Fe(CO)2(B:)}. The metalloborylene complex is known for its ability to transfer the borylene moiety to both organic and organometallic fragments. Thus, reaction of 43 with the tungsten hydride complex [(η5 C5H5)(H)W(CO)3] leads to the dinuclear hydridoborylene complex [{(η5-C5Me5)(CO)2Fe}(µ-B)(µ-H){CpW(CO)2}] (74) in yields of 52% (Figure 108). This intermetallic borylene transfer offers an alternative synthesis route to the well-known salt-elimination reaction. X-ray crystallographic studies and NMR spectroscopic data confirmed the bridging position of the hydride between the tungsten and the boron center. Figure 108: Synthesis of the borido complex 74. The addition of one equivalent of the zerovalent platinum fragment [Pt(PCy3)2] to the hydridoborylene complexes [{(η5-C5Me5)(CO)2Fe}(µ B)(µ-H){CpM(CO)2}] (M = W (74), M = Mo (75)) results in BH-bond breakage and the formation of the T-shaped trinuclear borido complexes [{(η5-C5Me5)Fe(CO)}(µ-CO){Pt(PCy3)}{CpM(CO)2}(µ3-B)] (M = W (76), Mo (77)) (Figure 109). The hydrido ligand occupies a bridging position between the MPt bond and single crystal X-ray analysis confirmed the absence of a BH interaction. Single crystal X ray diffraction studies of 76 and 77 revealed MB bond distances comparable to those found for other borido complexes. In addition, the PtB distances are significantly elongated and resemble those found in metal base adducts of other boron species. With an additional equivalent of the [Pt(PCy3)2] fragment it was possible to occupy the last free coordination site at the central boron atom. Thus, the tetranuclear species [{(Cp*)Fe(CO)}(µ-CO){Pt(PCy3)2}{CpM(CO)2}(µ4-B)] (M = W (78), M = Mo (79)) (Figure 109) were obtained in isolated yields of 44% and 30%. As was determined by the solid-state structure, the complex 79 retains the bridging hydride and carbonyl ligands of its precursor 77, adding a [Pt(PCy3)2] fragment to the boron atom held in place by two further bridging carbonyl ligands. The boron atom in 79 is even more distorted from planarity (angular sum around boron: 335.7(7)°) than the two published examples of planar tetracoordinate boron complexes (362.4° and 364.6°). Consequently the four metal atoms and the boron (FeBMo: 162.5(3)°, PtBPt: 91.1(2)°) form a saw-horse geometry and not the expected nearly-square-planar coordination mode (Anti-van`t Hoff-Le Bel-compounds). The 31P{1H} NMR spectra shows only one signal in solution, thus the bridging hydride and carbonyl ligands are fluxional at room temperature. Figure 109: Synthesis of the tri- and tetranuclear borido complexes 76-79. Furthermore, the metalloborylene moiety {(η5-C5Me5)Fe(CO)2(B:)} of 43 can also be transferred successfully to alkynes. The thermal borylene transfer has turned out to be applicable to a set of alkynes with different functional groups, expanding the class of ferroborirenes to 81-86 (Figure 110), which were obtained in yields of 24-61%. Figure 110: Synthesis of the ferroborirenes 81-86. The characteristic structural feature of these compounds is a three-membered BCC-ring. The short BC bonds as well as the long CC bonds suggests a delocalisation of the two π electrons over a three centered bonding molecular orbital comprised of the pz atomic orbitals of boron and carbon. The first complete characterization of a ferro(bis)borirene (87) was carried out by thermal metalloborylene transfer and drastic reaction conditions. Thus, the reaction of 43 with different diynes leads to the formation of the ferro(bis)borirenes 87-89 (Figure 111). Figure 111: Synthesis of the ferro(bis)borirenes 87-89. Due to the shortening of the C–C single bond between the two boracycles (1.411(3) Å) it can be assumed that there is a strong electronic interaction between the two boracyclopropene rings. Numerous attempts to cleave the Fe–B bond of the ferroborirene 63 with H2, Br2 or HCl to gain access to borirenes with modified properties failed. Additionally, several quaternization attempts of the ring boron atom from 63 with less basic pyridine derivates (3,5-lutidine, 4-(dimethylamino)-pyridine) were unsuccessful. The 11B{1H} NMR spectra showed in all cases only the reactant signal of 63 at δ = 63.4 ppm. The implementation of 63 with a cyclic (alkyl)(amino) carbene also yielded no reaction. Further investigations on the reactivity of 63 showed that it is possible to cleave the FeB bond. Treatment of 63 with two equivalents of the N-heterocyclic carbenes IMe, IMeMe and IiPr results in heterolytic FeB bond cleavage, yielding the boronium cations 90-92 (Figure 112). In this way, the first borironium salts of a borirene could be obtained. Figure 112: Synthesis of the boronium cations 90-92. Because of the quaternization of the boron atom the structural findings for the boronium cations are interpreted as indicative for annihilation of delocalization of the two π electrons over the three-centered bonding molecular orbital comprised of the pz atomic orbitals of boron and carbon. A further topic of this thesis focussed on the reactivity of manganese boryl complexes towards isonitriles. It turns out that the reaction of the dibromoboryl complex 94 with cyclohexyl- or tert-butylisonitrile leads to the formation of the Lewis-base adducts 95 and 96 (Figure 113). Figure 113: Synthesis of the base adducts 95 and 96. In contrast to the afore-mentioned reactions, treatment of the phosphine-substituted manganese dichloroboryl complex 98 with cyclohexyl- or tert-butylisonitrile leads not to the Lewis adduct formation, but insertion of the isonitriles into the MnB bond (Figure 114). In these complexes the former boryl unit is coordinated by the carbon and nitrogen atom of one isonitrile and by the carbon of the second isonitrile, forming a four-membered ring. This compound might be best described as a manganese carbene-like complex. Furthermore, two carbonyl ligands at the manganese were replaced by two isonitriles. Figure 114: Synthesis of insertion complexes 99 and 100. The last objective of this work was the exploration of the reactivity of the borido complex 43 with different isonitriles. While the treatment of the borido complex 43 with tert-butyl- or mesitylisonitrile does not lead to a selective reaction, the reaction of 43 with three equivalents of cyclohexylisonitrile leads to insertion of the isonitriles into the MB bonds, revealing a [2.3] spiro species 103 (Figure 115). In 103, the boron atom is coordinated to three separate isonitrile units, two of which have been coupled head-to-head. In this case, insertion into the FeB single bond shows reactivity similar to that observed with the iron boryl complex 11, while the double insertion into the Cr=B bond is analogous to the reactivity observed for the chromium aminoborylene complex 17. This reactivity, leading to 103, allows an interesting internal comparison of the boryl and borylene functionalities, which show distinct reactivity even within the same molecule. Figure 115: Synthesis of the spiro compound 103. X-ray diffraction of suitable crystals from the treatment of 43 with supermesitylisonitrile confirmed the formation of [(OC)4(Mes*NC)2Cr] (109). This finding, as well as quantum chemical calculations support the formation of 115 (Figure 116). Figure 116: Reaction of 43 with Mes*NC. As we were interested in the nature of the bonding within the three- and four-membered rings of the isonitrile-inserted [2.3] spiro complex 103, further investigations with the strong Lewis acid tris(pentafluorophenyl)borane revealed the formation of the Lewis adduct (C5F5)3B−CNtBu. Furthermore the possibility to selectively add HCl to the B−N bond of the three-membered ring without decomposition of the compound allowed the characterization of 118 (Figure 117). This finding suggests that the B–N bond in 103 can be described as a dative N→B interaction, thus being easier to cleave than the B–C single bond of the three-membered ring. KW - Borylene KW - Metalloborylenkomplexe KW - Eisen-substituierte Borirene KW - Borirene KW - Borylentransfer Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-118850 ER - TY - JOUR A1 - Mukhopadhyay, Deb Pratim A1 - Schleier, Domenik A1 - Wirsing, Sara A1 - Ramler, Jaqueline A1 - Kaiser, Dustin A1 - Reusch, Engelbert A1 - Hemberger, Patrick A1 - Preitschopf, Tobias A1 - Krummenacher, Ivo A1 - Engels, Bernd A1 - Fischer, Ingo A1 - Lichtenberg, Crispin T1 - Methylbismuth: an organometallic bismuthinidene biradical JF - Chemical Science N2 - We report the generation, spectroscopic characterization, and computational analysis of the first free (non-stabilized) organometallic bismuthinidene, BiMe. The title compound was generated in situ from BiMe\(_3\) by controlled homolytic Bi–C bond cleavage in the gas phase. Its electronic structure was characterized by a combination of photoion mass-selected threshold photoelectron spectroscopy and DFT as well as multi-reference computations. A triplet ground state was identified and an ionization energy (IE) of 7.88 eV was experimentally determined. Methyl abstraction from BiMe\(_3\) to give [BiMe(_2\)]• is a key step in the generation of BiMe. We reaveal a bond dissociation energy of 210 ± 7 kJ mol\(^{−1}\), which is substantially higher than the previously accepted value. Nevertheless, the homolytic cleavage of Me–BiMe\(_2\) bonds could be achieved at moderate temperatures (60–120 °C) in the condensed phase, suggesting that [BiMe\(_2\)]• and BiMe are accessible as reactive intermediates under these conditions. KW - methylbismuth KW - Photoelektronenspektroskopie Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-251657 UR - https://pubs.rsc.org/en/content/articlelanding/2020/SC/D0SC02410D VL - 11 IS - 29 ER - TY - THES A1 - Brunecker, Carina T1 - Darstellung und Reaktivität dinuklearer Platinphosphankomplexe und Palladium vermittelte Kreuzkupplung zur Synthese von Polyboranen T1 - Synthesis and reactivity of dinuclear platinum phosphine complexes and palladium mediated cross-coupling for the synthesis of polyboranes N2 - Im Rahmen dieser Arbeit war es möglich, diverse dinukleare Platinphosphankomplexe darzustellen, wodurch unteranderem neuartige unsymmetrische (N- Aminoboryl)aminoboryl Pt-Komplexe, Borandiyl- und Diboran-1,2-diyl-verbrückte Diplatin-A-Frame Komplexe synthetisiert und charakterisiert werden konnten. Der abschließende Teil dieser Arbeit befasst sich mit den ersten Versuchen zur Darstellung von Polyboranen durch eine Palladium-vermittelte Kreuzkupplungsreaktion. N2 - Within the scope of this work, it was possible to prepare diverse dinuclear platinum phosphane complexes, allowing, among others, the synthesis and characterization of novel asymmetric (N-aminoboryl)aminoboryl Pt- complexes, boranediyl- and diborane-1,2-diyl-bridged diplatinum A-frame complexes. The final part of this thesis focuses on the first attempts to synthesize polyboranes through a palladium-mediated cross-coupling reaction. KW - Metallorganische Verbindungen KW - Polyborane KW - B-N-Kupplung KW - Kreuzkupplung KW - oxidative Addition KW - Platinkomplexe KW - Kreuzkupplungsreaktion KW - Polyborane KW - A-Frame Komplexe Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-251361 ER - TY - INPR A1 - Schmidt, Uwe A1 - Fantuzzi, Felipe A1 - Arrowsmith, Merle A1 - Hermann, Alexander A1 - Prieschl, Dominic A1 - Rempel, Anna A1 - Engels, Bernd A1 - Braunschweig, Holger T1 - Tuneable reduction of cymantrenylboranes to diborenes or borylene-derived boratafulvenes T2 - Chemical Communications N2 - Whereas the reduction of N-heterocyclic carbene (NHC)-stabilised cymantrenyldibromoboranes, (NHC)BBr\(_2\)Cym, in benzene results in formation of the corresponding diborenes (NHC)\(_2\)B\(_2\)Cym\(_2\), a change of solvent to THF yields a borylene of the form (NHC)\(_2\)BCym, stabilised through its boratafulvene resonance form. KW - Borylene KW - Diborene KW - Boranes Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-222149 ER - TY - THES A1 - Mawamba Kemo, Viviane T1 - Beladung von Microbubbles mit Platin(II)- oder Palladium(II)-Komplexen und Freisetzung unter Einwirkung von Ultraschall zur Behandlung von Glioblastomen T1 - Loading of microbubbles with platinum(II) oder palladium(II) complexes for ultrasound-triggered release in the treatment of glioblastoma N2 - Metall-basierte Antitumorwirkstoffe wie Cisplatin, Carboplatin und Oxaliplatin sind weltweit für die Behandlung verschiedener Krebsarten zugelassen. Resistenzbildung, starke Nebenwirkungen und ein eingeschränktes Spektrum responsiver Tumoren schränken jedoch ihren Anwendungsbereich ein. Daher ist die Suche nach neuen Platinverbindungen mit verbesserten Eigenschaften sowie Antitumor-aktiven Metallkomplexen anderer Metalle ein aktuelles Forschungsthema. Durch die Einbettung der Wirkstoffe in entsprechende Trägermaterialien und eine Freisetzung mit präziser zeitlicher und räumlicher Kontrolle sollten sich zudem die Nebenwirkungen deutlich reduzieren lassen. Im Rahmen dieser Doktorarbeit wurde daher eine Serie von quadratisch-planaren Platin(II)- und Palladium(II)-Komplexen mit N^N^S-Chelatliganden auf der Basis von N-Phenyl-2-(pyridin-2-ylmethylen)hydrazin-1-carbothioamid und N-Phenyl-2-(chinolin-2-ylmethylen)hydrazin-1-carbothioamid synthetisiert, die mit längeren Alkylketten funktionalisiert wurden, um eine hohe Affinität für Lipid-basierte Microbubbles als Träger zu erreichen, aus denen die Metallkomplexe dann unter Einwirkung von Ultraschall freigesetzt werden sollten. Es wurden drei verschiedene Ligandenfamilien ausgehend von der Grundstruktur L = R1-CR2=N-NH-C(S)-NH-R3 synthetisiert, wobei R1 = 2-Pyridyl oder 2-Chinolinyl, R2 = H, CH3, C8H17 oder C10H21 und R3 = CH3 oder C6H5 gewählt wurden. Die Umsetzung der Liganden mit Kaliumtetrachloridoplatinat(II), Natriumtetrachloridopalladat(II) oder [PdCl2(cod)] mit cod = 1,5-Cyclooctadien führte zu neutralen N^N^S-Komplexen [MCl(L)] mit M = Pd, Pt in allgemein guter Ausbeute. Die Kristallstruktur von [PtCl(L)] mit R1 = 2-Pyridyl, R2 = C10H21 und R3 = CH3 bestätigte zudem die quadratisch-planar Koordination des Metalls durch den N^N^S-koordinierten Liganden und ein Chlorid-Anion. Die Verbindungen mit R3 = CH3 zeigen im 195Pt NMR zwei Peaks, was auf das Vorliegen eines Isomerengemischs hindeutet, wobei die Daten vermuten lassen, dass neben der N^N^S-gebundenen Hauptspezies noch eine weitere mit N^N^N-koordiniertem Liganden und freier SH-Gruppe vorliegt. Solche Isomerengemische sind für biologischen Anwendungen ungeeignet, da die Isomere eine unterschiedliche Aktivität aufweisen können. Die anderen Platin(II)-Komplexe zeigen dagegen im 195Pt NMR nur einen Peak und sind somit für Cytotoxizitätsstudien geeignet. Mit Hilfe des MTT-Assays wurden EC50-Werte an verschiedenen Gliablastom-Zellinien für zwölf einheitliche Komplexe bestimmt. Für die potentesten Verbindungen wurden EC50-Werte im unteren mikromolaren Bereich ermittelt (2–9 µM), so dass die Aktivität teilweise sogar die von Cisplatin als Referenzverbindung übertraf. Insbesondere die Variation der aromatischen Oberfläche in den Pyridyl- vs. Chinolinylverbindungen hatte jedoch keinen wesentlichen Einfluss auf die EC50-Werte. Zudem führte eine Verlängerung der R2-Seitenkette bei den Palladium(II)-Verbindungen zu einer niedrigeren Aktivität. Die Verteilungskoeffizienten logP ergaben für alle Verbindungen recht ähnliche positive Werte, was die Lipophilie der Neutralkomplexe belegte. Für eine weitere Strukturvariation wurden außerdem zwei Azido-Komplexe [M(N3)(L)] mit M = Pd, Pt in moderater Ausbeute synthetisiert. Diese wurden dann in einer „iClick“-Reaktion unter sehr milden Bedingungen mit Dimethylacetylendicarboxylat (DMAD) und 4,4,4-Trifluorobut-2-insäureethylester zu den Triazolat-Komplexen [M(triazolateR,R')(L)] umgesetzt. Durch 1H NMR- und 19F NMR-spektroskopische Untersuchungen wurden gezeigt, dass diese teilweise als Isomerengemische vorliegen, da das Triazolat entweder über das N1-, N2- oder N3-Stickstoffatom an das Metall gebunden sein kann. Für eine ausgewählte Verbindung mit M = Pt und DMAD als Alkin wurde die Kinetik der „iClick“-Reaktion mit Hilfe der 1H NMR Spektroskopie untersucht. Die ermittelte Geschwindigkeitskonstante 2. Ordnung k2 = (1.82 ± 0.05).10-1 L mol-1 s 1 ist vergleichbar zum Beispiel der der etablierten strain-promoted azide-alkyne cycloaddition (SPAAC). Für die Einbettung der lipophilen Metallkomplexe in ein Ultraschall-aktivierbares Trägersystem wurden aus Dipalmytoylphosphatidylcholin, 1,2-Dipalmitoyl-sn-glycero-3-phosphat, 1,2-Distearoyl-sn-glycero-3-phosphoethanolamin-N-methoxy(polyethylenglycol)-2000 Ammonium Salz und Komplexlösung unter Zusatz von Octafluopropan gasgefüllte Microbubbles hergestellt. Stabilitätsversuche zeigten, dass die Bläschenzahl selbst unter Normalbedingungen innerhalb von 2 h um 50% abnimmt. Daher sollten die Microbubbles vor jeder Verwendung täglich frisch hergestellt und möglichst unmittelbar danach verwendet werden. Ein unmittelbares Zerplatzen der Bläschen wurde durch Behandlung mit Ultraschall bei 500 Hz erreicht. Die Viabilität der verwendeten GaMG-Zellen wudre unter diesen Bedingungen jedoch nicht beeinträchtigt. Dennoch war die auf die Microbubbles geladene Platin-Konzentration zu niedrig, um mit dem MTT-Assay einen signifikanten Unterschied zwischen beladenen und unbeladenen Bläschen zu erreichen, so dass hier in Zukunft noch weitere Optimierungen erforderlich sein werden. N2 - Metal-based anti-tumor agents such as cisplatin, carboplatin and oxaliplatin are approved worldwide for the treatment of various types of cancer. However, the development of resistancies, severe side effects and a limited range of responsive tumors limit their scope. Therefore, the search for new platinum compounds with improved properties as well as antitumor-active metal complexes of other metals is a highly active current research topic. By embedding the active compounds in appropriate carrier materials and releasing them with high temporal and spatial control, it should be possible to significantly reduce undesireable side effects. In this doctoral thesis, a series of square-planar platinum(II) and palladium(II) complexes with N^N^S chelate ligands based on N-phenyl-2-(pyridin-2-ylmethylene)hydrazine-1-carbothioamide as well as N-phenyl-2-(quinolin-2-ylmethylene)hydrazine-1-carbothioamide were synthesized, which were functionalized with long alkyl chains in order to achieve a high affinity for lipid-based microbubbles as carriers, from which the metal complex were to be released under exposure to ultrasound. Three different ligand families were synthesized based on the basic structure L = R1-CR2=N-NH-C(S)-NH-R3, where R1 = 2-pyridyl or 2-quinolinyl, R2 = H, CH3, C8H17 or C10H21 and R3 = CH3 or C6H5. The reaction of the ligands with potassium tetrachloridoplatinate(II), sodium tetrachloridopalladate(II) or [PdCl2(cod)] with cod = 1,5-cyclooctadiene, led to neutral N^N^S complexes [MCl(L)] with M = Pd, Pt in good general yield. The crystal structure of [PtCl(L)] with R1 = 2-pyridyl, R2 = C10H21 and R3 = CH3 also confirmed the square-planar coordination of the metal by the N^N^S-coordinated ligand and a chloride anion. The compounds with R3 = CH3 show two peaks in the 195Pt NMR, which indicates the presence of a mixture of isomers, suggesting that, in addition to the main N^N^S-bonded species, another complex with an N^N^N-coordinated ligand and free SH group is present. Such mixtures of isomers are unsuitable for biological applications, since the isomers can have different biological activity. On the other hand, the other platinum(II) complexes only show one 195Pt NMR peak and therefore are suitable for cytotoxicity studies. With the help of the MTT assay, EC50 values were determined in various glioblastoma cell lines for twelve pure complexes. For the most potent compounds, EC50 values in the lower micromolar range were determined (2–9 µM), with some activity even exceeding that of cisplatin used as a reference compound under similar conditions. Interestingly, variation of the aromatic surface area in the pyridyl vs. quinolinyl compounds did not have any significant effect on the EC50 values. In addition, the extension of the R2 side chain in the case of the palladium(II) compounds led to a lower activity. The partition coefficient logP was positive and quite similar for all studied compounds, which demonstrates the lipophilicity of the neutral complexes. For further structural variation, two azido complexes [M(N3)(L)] with M = Pd, Pt were synthesized in moderate yield. In an iClick reaction with dimethylacetylenedicarboxylate (DMAD) and ethyl 4,4,4-trifluorobut-2-ynoate, they gave under very mild condition triazolate complexes [M(triazolateR,R')(L)]. 1H NMR and 19F NMR spectroscopic analysis showed that a mixture of isomers was present in the product, as the triazolate ligand can bind to the metal center via either the N1, N2, or N3 nitrogen atoms. For a selected compound with M = Pt and DMAD as the alkyne coupling partner, the kinetics of the iClick reaction was investigated by 1H NMR spectroscopy. The second order rate constant k2 was determined as (1.82 ± 0.05).10-1 L mol-1 s-1 and is comparable to that of the established strain-promoted acid-alkyne cycloaddition (SPAAC). To embed the lipophilic metal complexes in an ultrasound-activatable carrier, dipalmytoylphosphatidylcholine, 1,2-dipalmitoyl-sn-glycero-3-phosphate, 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene- glycol)-2000 ammonium salt and a metal complex stock solution were mixed in an atmosphere of octafluoropropane to produce gas-filled microbubbles. Stability tests showed that the bubble concentration decreased by 50% within 2 h. Therefore, the microbubbles should be freshly prepared every day and used immediately afterwards. The bursting of the bubbles was achieved under ultrasound explore at 500 Hz, which did not affected the growth of the cells. However, the platinum concentration loaded onto the microbubble was too low to induce significant differences between loaded and non-loaded microbubble, as determined by the MTT assay. Therefore, optimization of microbubble loading metal complexes has to be a major topic of future work. KW - Microbubble KW - Platin KW - Palladium KW - Ultraschall KW - Glioblastomen KW - Glioblastom KW - Palladium KW - Platin KW - Ultraschall Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-216165 ER - TY - JOUR A1 - Liu, Siyuan A1 - Légaré, Marc-André A1 - Seufert, Jens A1 - Prieschl, Dominic A1 - Rempel, Anna A1 - Englert, Lukas A1 - Dellermann, Theresa A1 - Paprocki, Valerie A1 - Stoy, Andreas A1 - Braunschweig, Holger T1 - 2,2′-Bipyridyl as a Redox-Active Borylene Abstraction Agent JF - Inorganic Chemistry N2 - 2,2′-Bipyridyl is shown to spontaneously abstract a borylene fragment (R–B:) from various hypovalent boron compounds. This process is a redox reaction in which the bipyridine is reduced and becomes a dianionic substituent bound to boron through its two nitrogen atoms. Various transition metal–borylene complexes and diboranes, as a well as a diborene, take part in this reaction. In the latter case, our results show an intriguing example of the homolytic cleavage of a B═B double bond. KW - Borylene KW - Heterocycles KW - Boron KW - Main-group chemistry Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-215595 N1 - This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Inorganic Chemistry, copyright © American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acs.inorgchem.0c01383. VL - 59 IS - 15 ER - TY - JOUR A1 - Scherpf, Thorsten A1 - Schwarz, Christopher A1 - Scharf, Lennart T. A1 - Zur, Jana-Alina A1 - Helbig, Andeas A1 - Gessner, Viktoria H. T1 - Ylide-Functionalized Phosphines: Strong Donor Ligands for Homogeneous Catalysis JF - Angewandte Chemie - International Edition N2 - Phosphines are important ligands in homogenous catalysis and have been crucial for many advances, such as in cross-coupling, hydrofunctionalization, or hydrogenation reactions. Herein we report the synthesis and application of a novel class of phosphines bearing ylide substituents. These phosphines are easily accessible via different synthetic routes from commercially available starting materials. Owing to the extra donation from the ylide group to the phosphorus center the ligands are unusually electron-rich and can thus function as strong electron donors. The donor capacity surpasses that of commonly used phosphines and carbenes and can easily be tuned by changing the substitution pattern at the ylidic carbon atom. The huge potential of ylide-functionalized phosphines in catalysis is demonstrated by their use in gold catalysis. Excellent performance at low catalyst loadings under mild reaction conditions is thus seen in different types of transformations. KW - carbanion KW - homogeneous catalysis KW - phosphine ligands KW - structure elucidation KW - ylides Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-228551 VL - 57 IS - 39 ER - TY - THES A1 - Pai, Sandesh T1 - Synthesis of manganese tricarbonyl PhotoCORM conjugates - from small molecules to peptides and dendrimers T1 - Synthese von Mangan(I)-Tricarbonyl PhotoCORM Konjugaten - von kleinen Molekülen hin zu Peptid- und Dendrimer-Konjugaten N2 - Novel manganese(I) tricarbonyl complexes based on the tridentate bis(pyrazolyl)ethylamine (bpea) ligand with pendant functionalized phenyl groups were synthesized and conjugated to biological carrier systems like peptides and dendrimers. Their dark stability establishes them as CORM prodrugs. The monomers show a faster CO-release compared to the peptide and dendrimer conjugates. However, both monomers and peptide conjugates release two equivalents of CO upon photoactivation at 365 nm. The dendrimer conjugates can deliver up to seven equivalents of CO due to the higher number of Mn(CO)3 moieties per molecular unit. In the future, the biological activity of the conjugates needs to be further explored to establish the targeted delivery of CO to cells and tissues. N2 - Das Ziel dieser Doktorarbeit war die Synthese von Mangan(I)-Tricarbonylkomplexen als neuartige photoaktivierbare CO-releasing molecules (PhotoCORMs) und ihrer Peptid- und Dendrimer-Konjugate als Trägersysteme für das targeted delivery von Kohlenstoffmonoxid in biologischen Systemen. Dafür wurde eine Serie von sechs Mn(I)-Tricarbonylkomplexen basierend auf dem Bis(pyrazolyl)ethylamin-Liganden (bpea) hergestellt welche einen para-substituierten Phenylring mit einer peripheren Iod- oder Alkin-Gruppe enthalten. Diese sollten eine Konjugation an Biomoleküle mittels Sonogashira- oder CuAAC-"click"-Reaktion ermöglichen. Alle Verbindungen wurden in guter Ausbeute mit hoher Reinheit erhalten. Die Einkristall-Röntgenstrukturen der Verbindungen mit Iod- und Alkin- Substituenten belegen die faciale Koordination des tridentaten bpea-Liganden an die Mn(CO)3-Gruppe. Alle Komplexe zeigen bei Lichtausschluß eine sehr gute Stabilität in Dimethylsulfoxid-Lösung über bis zu 14 h, die Photoaktivierung bei 365 nm führt dagegen zur Freisetzung von zwei Äquivalenten Kohlenstoffmonoxid pro Mol Komplex. Obwohl die Verbindungen MLCT-Banden um 350 nm ausweisen, können sie auch noch bei 410 nm stimuliert werden, was für biologische Anwendungen vorteilhaft ist. Die photoinduzierte CO-Freisetzung wurde auch mittels IR- Spektroskopie in Lösung verfolgt. Die Banden neu auftretender Intermediate konnten dabei mit Hilfe von DFT-Rechnungen zugeordnet werden und belegen die Bildung von cis-Mn(CO)2-Spezies nach der Freisetzung eines ersten Äquivalents Kohlenstoffmonoxid. Die CO-Freisetzung wurde auch mit Hilfe eines des fluoreszenten CO-Indikators COP-1 untersucht. Während bei Inkubation im Dunkeln auch bei einem 10:1- Verhältnis von CORM zu COP-1 kein Signal beobachtet werden konnte, führt die lichtinduzierte CO-Freisetzung zu einem konzentrationsabhängigen Anstieg der Fluoreszenz. Die photoaktivierte CO-Freisetzung wurde auch in lebenden HUVEC- Zellen untersucht. In der überstehenden Lösung konnte ein Ansteig der COP-1- Fluoreszenz relativ zum Hintergrund um einen Faktor von 15 beobachtet werden während die Intensititäszunahme für die Zellfraktion nur bei etwa 5-fach lag. Dies könnte auf eine nur geringe Zellaufnahme von COP-1 oder CORM oder beider Moleküle zurückzuführen sein. Die Untersuchungen etablieren die bpea-Komplexe aber eindeutig als photoaktivierbare CO-releasing molecules (PhotoCORMs). Peptide sind attraktive Trägersysteme für das cellular delivery von Metallkomplexen. Als Modell für solche Trägerpeptide wurde die transforming growth factor -bindende (TGF-) Sequenz durch Festphase-Peptidsynthese hergestellt. Die Anknüpfung von [Mn(bpea)(CO)3]+ an das Peptid über eine periphere Funktionalität des Liganden über eine Sonogashira-Kreuzkupplung bzw. CuAAC-"Click"-Reaktion sollte in einer Postlabelling-Strategie erfolgen. Obwohl verschiedene Bedingungen getestet wurden führte erstere Reaktion jedoch nicht zum Erfolg. Die CuAAC-Reaktion zwischen einem Alkin-funktionalisierten Metallkomplex und einem Azid-terminierten Peptid führt dagegen zu dem gewünschten N-terminal funktionalisierten Konstrukt, welches über eine Triazolgruppe zusammengehalten wird. Trotzdem zeigte das Konjugat auf Grund einer Imin-Bindung im bpea-Liganden eine Tendenz zur Hydrolyse in wässrigem Medium. Als Alternative wurde daher die milde und katalysatorfreie Oxim-Ligation in Verbindung mit einem stabileren, Amin- anstatt Imin-basierten Liganden untersucht. Die Kupplung zwischen einem Aminoxyessigsäure- terminierten TGF--bindenden Peptid und einem Aldehyde-funktionalisierten Metallkomplex ergab das gewünschte Konjugat in guter Ausbeute mit höher Stabilität. Für bis zu 96 h konnte selbst bei wiederholten freeze-thaw-Zyklen keinerlei Zersetzung beobachtet werden. Das CO-Freisetzungsverhalten von Konjugat und Stammverbindung war identisch, die Photoaktivierung bei 365 nm führt für beide innerhalb von 1–1.5 h zur Freisetzung von zwei Äquivalenten CO pro Mol Komplex. Die Oxim-Ligation konnte so als milder Zugang zu CORM-Peptidkonjugaten etabliert werden. Dendrimere sind Baum-artige Moleküle mit einer Vielzahl von Funktionalitäten in der Peripherie, die eine Modifikation mit Metallkomplexen für biologische Anwendungen erlauben. Von besonderem Interesse ist hierbei die Anreicherung in Tumorgewebe auf Grund des enhanced permeability and retention(EPR)-Effekts. Diaminobutan(DAB)- und Polyamidoamin(PAMAM)-Dendrimere der Generation 1 mit vier terminalen Amingruppen wurden daher in einer Schiff-Base-Kondensation mit Aldehyd-funktionalisierten Mn(bpea)(CO)3-Komplexen umgesetzt. Die erhaltenten Metallkomplex-Dendrimer-Konjugate waren in wässriger DMSO-Lösung im Dunkeln für bis zu 14 h stabil. Die Photolyse zeigte eine geringfügig schnellere CO- Freisetzung für das DAB- vs. dem PAMAM-Dendrimer. Eine Anregung bei 410 nm führte zu einer deutlich langsameren CO-Freisetzung gegenüber der 365 nm- Belichtung. Mit Hilfe des Myoglobin-Assays konnte gezeigt werden daß auf diese Weise 50–55% der Gesamtzahl an CO-Liganden aus dem System freigesetzt werden kann. Im Rahmen der vorliegenden Arbeit wurden neue Mangan(I)tricarbonyl-Komplexe auf der Basis des tridentaten Bis(pyrazolyl)ethylamin(bpea)-Liganden hergestellt, die in der Peripherie funktionalisierte Phenylgruppen tragen, welche die Anknüpfung an biologische Trägersysteme auf der Basis von Peptiden und Dendrimeren erlauben. Auf Grund ihrer Stabilität unter Lichtausschluß sind diese Verbindungen als CORM- Prodrugs geeignet. Die Photoaktivierung bei 365 nm führt zur Freisetzung von zwei Äquivalenten CO pro Mol CORM, wobei die Stammverbindungen eine etwas schnellere Kinetik aufweisen als die Konjugate. Insbesondere die Dendrimer- basierten Systeme können auf Grund der hohen Anzahl von Mn(CO)3-Gruppen bis zu sieben CO pro Mol Konjugat liefern. Für die Zukunft bleibt zu zeigen ob diese Konjugate eine zelluläre Anreicherung für biologische Anwendungen erlauben wird. KW - Mangankomplexe KW - carbon monoxide KW - Tricarbonylverbindungen KW - Kohlenmonoxid KW - manganese tricarbonyl complexes KW - peptide conjugates KW - dendrimer conjugates KW - myoglobin assay KW - oxime ligation KW - CuAAC 'click' reaction KW - Sternpolymere KW - PhotoCORMs KW - CORMs Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-104824 ER - TY - THES A1 - Laskowski, Nadine T1 - Synthese und Charakterisierung neuartiger siliciumhaltiger Synthesebausteine T1 - Synthesis and characterization of novel silicon building blocks N2 - Die vorliegende Arbeit beschreibt die Synthese von linearen und verzweigten funktionalisierten siliciumhaltigen Synthesebausteinen unter Verwendung der 2,4,6-Trimethoxyphenyl-Schutzgruppe sowie die Synthese cyclischer siliciumhaltiger Synthese-bausteine unter Verwendung eines Donor-stabilisierten Silylens. Diese Forschungsarbeit leistet daher sowohl einen Beitrag zur Schutzgruppenchemie des Siliciums als auch zur Chemie des nieder- bzw. höhervalenten Siliciums. Alle Zielverbindungen sowie die entsprechenden isolierten Vorstufen wurden durch NMR-Spektroskopie in Lösung (1H-, 13C- und 29Si-NMR) und Elementaranalysen (C, H, N; außer 15 und 16) charakterisiert. Die Verbindungen 34, 36, 41, 42, 45, 48, 52, 54 und 55 wurden zusätzlich durch NMR-Spektroskopie im Festkörper (13C-, 15N- und 29Si-VACP/MAS-NMR) untersucht, und die Verbindungen 1–6, 9, 18, 25, 29, 34, 36, 41, 42, 45, 48, 52, 54 und 55 wurden außerdem durch Einkristall-Röntgenstrukturanalyse charakterisiert. N2 - This thesis describes the synthesis of linear and branched Si-functionalized building blocks by using the 2,4,6-trimethoxyphenyl protecting group as well as the synthesis of cyclic silicon-containing building blocks by using a donor-stabilized silylene. Thus, this research project contributes to both the chemistry of silicon protecting groups and the chemistry of high/low-valent silicon. The identities of all target compounds and their isolated precursors were established by NMR spectroscopic studies in solution (1H, 13C, and 29Si NMR) and elemental analyses (C, H, N; except 15 and 16). In addition, compounds 34, 36, 41, 42, 45, 48, 52, 54, and 55 were studied by NMR spectroscopy in the solid state (13C, 15N, and 29Si VACP/MAS NMR), and compounds 1–6, 9, 18, 25, 29, 34, 36, 41, 42, 45, 48, 52, 54, and 55 were additionally characterized by single-crystal X-ray diffraction. KW - Silicium KW - Chemische Synthese KW - siliciumhaltige Synthesebausteine Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-107481 ER - TY - THES A1 - Matthes, Philipp Robert T1 - Neue Ln-N-Koordinationspolymere und MOFs als Hybridmaterialien für effektive Lumineszenz und neuartige Phosphore T1 - New Ln-N-coordination polymers and MOFs as hybrid materials for effective luminescence and new phosphors N2 - In der vorliegenden Arbeit wird die Darstellung und Charakterisierung von Komplexen, Koordinationspolymeren und MOFs auf der Basis von dreiwertigen Lanthanidchloriden und verschiedenen verbrückenden Azin- und Diazin-Liganden beschrieben. Ziel war es neuartige Koordinationspolymere mit effektiven Photolumineszenzeigenschaften zu generieren. Es konnten 44 neue organisch-anorganische Hybridmaterialien präsentiert werden. Der Fokus der Arbeit lag neben der strukturellen Charakterisierung auf der Bestimmung der Photolumineszenzeigenschaften und der Betrachtung der thermischen Eigenschaften der Verbindungen. Bei solvothermalen Reaktionen von wasserfreien Lanthanidchloriden mit den Liganden 4,4‘-Bipyridin (bipy) und Pyridin (py) konnten die dinuklearen Komplexe [Ln2Cl6(bipy)(py)6] mit Ln = Y, Pr, Nd, Sm-Yb, die strangartigen Koordinationspolymere 1∞[LnCl3(bipy)(py)2]·(py) mit Ln = Gd-Er, Yb und 1∞[Lu2Cl5(bipy)2 (py)4]1∞[LuCl4(bipy)], sowie das 2D-Netzwerk 2∞[Ce2Cl6(bipy)4]·(py) synthetisiert und mithilfe der Röntgeneinkristallstrukturanalyse charakterisiert werden. Spektroskopische Untersuchungen an den Verbindungen ergaben außergewöhnliche Photolumineszenzeigenschaften auf der Basis von Ln3+-Ionen mit Emissionen im UV-VIS und NIR-Bereich. Im Falle des dinuklearen Komplexes konnten mithilfe der Ionen Y3+, Gd3+, Tb3+ und Eu3+ Lichtemission in den RGB-Grundfarben generiert werden. Der Einfluss salzsaurer Bedingungen führt zur Bildung der pyridiniumhaltigen Nebenphasen [Hpy]1∞[LnCl4(bipy)] mit Ln = Y, Tb), Yb, Lu, [Hpy]22∞[Sm2Cl8(bipy)3]·2(py) und [Hdpa] [EuCl4(dpa)]. Unter der Verwendung einer Schmelzsyntheseroute wurden die Verbindungen 3∞[La2Cl6(bipy)5] ·4(bipy) 2∞[Ln2Cl6(bipy)3]·2(bipy) mit Ln = Nd, Sm-Dy, Er, Yb und eine Dotierreihe mit Ln = Gd2-x-yEuxTy (x,y = 0-1), welche vor einigen Jahren im Arbeitskreis von Prof. Müller-Buschbaum et al. entdeckt wurden, dargestellt. Der Fokus der Arbeit lag hierbei auf der Bestimmung der Photolumineszenzeigenschaften der Netzwerke, wobei vor allem bei der Dotierreihe unter der Verwendung von Ln3+-zentrierter Emission ein stufenloses Farbtuning der Emissionsfarbe von grün nach rot erreicht werden konnte. Zusätzlich wurden an diesen Verbindungen systematische Untersuchungen zur strukturellen Aufklärung, der bei höheren Temperaturen entstehenden Netzwerk- und Gerüstverbindungen, durchgeführt. Hierbei konnten Kondensationsprodukte wie 3∞[LaCl3(bipy)], 2∞[Ln3Cl9(bipy)3] mit Ln = Pr, Sm, 2∞[Ho2Cl6(bipy)2] und 2∞[Gd2Cl6(qtpy)(bpy)]·(bipy) strukturell aufgeklärt werden. Die Übertragung der solvothermalen Syntheseroute unter der Verwendung von Pyridin auf die gegenüber bipy verlängerten Azin-Liganden Dipyridylethen (dpe) bzw. –ethan (dpa) erwies sich als erfolgreich und resultierte in eine Erweiterung der Strukturchemie durch die Darstellung der lumineszierenden Koordinations-polymere 2∞[La2Cl6(dpe)3(py)2]·(dpe), 1∞[LnCl3(dpe)(py)2]·0.5(dpe)0.5(py) mit Ln = Eu, Gd, Er, 2∞[LaCl3(dpa)2]·(dpa) und 1∞[LnCl3(dpa)(py)2]·0.5(dpa)0.5(py) mit Ln = Gd, Er. Eine Verkürzung des bipy-Liganden in Form der Di-Azinen wie Pyrazin (pyz), Pyrimidin (pym) und Pyridazin (pyd) und deren Umsetzung mit LnCl3 führte zur Bildung von Komplexen und polymeren Strukturen wie 3∞[LaCl3(pyz)], [Ln2Cl6(pyz)(py)6]·2(pyz) mit Ln = Sm, Er, 1∞[Sm2Cl6(μ-pym)2(pym)3]·(pym), [Er2Cl6(pym)6] und [ErCl3(η-pyd)(pyd)2] mit Lumineszenzeigenschaften auf der Basis der jeweiligen Liganden und Ln3+-Ionen. N2 - The present work is about the synthesis and characterization of complexes, coordination polymers and MOFs based on trivalent lanthanidechlorides and different bridging azine and diazine ligands. The creation of new coordination polymers with effective photoluminescent properties was a main goal of this thesis. Therefore, 44 new organic-inorganic hybrid-materials are presented in this work. Main focus of investigation was on structural characterization and determination of photoluminescence and thermal properties of the synthesized compounds. Solvothermal reactions of anhydrous lanthanidechlorides with the ligand 4,4‘-bipyridine (bipy) and pyridine (py) lead to dinuclear complexes [Ln2Cl6(bipy)(py)6] with Ln = Y, Pr, Nd, Sm-Yb, strand-like coordination polymers 1∞[LnCl3(bipy)(py)2]·(py) with Ln = Gd-Er, Yb and 1∞[Lu2Cl5(bipy)2(py)4]1∞[LuCl4(bipy)] and also 2D-networks like 2∞[Ce2Cl6(bipy)4]·(py) could be obtained and characterized by single-crystal-X-ray-stucture-determination. Spectroscopic investigations revealed extraordinary photoluminescence properties based on Ln3+-ions with light emission in the UV-VIS and NIR range. Especially the dinuclear complexes containing Y3+, Gd3+, Eu3+ and Tb3+ ions showed the RGB basic colors, allowing color tuning in the visible range. The influence of hydrochloric conditions lead to the formation of the pyridinium containing side phases [Hpy]1∞[LnCl4(bipy)] with Ln = Y, Tb, Yb, Lu, [Hpy]22∞[Sm2Cl8(bipy)3]·2(py) and [Hdpa]1∞[EuCl4(dpa)]. Furthermore, the compounds 3∞[La2Cl6(bipy)5]·4(bipy), 2∞[Ln2Cl6(bipy)3]·2(bipy) with Ln = Nd, Sm-Dy, Er, Yb and a solid solution with Ln = Gd2-x-yEuxTy (x,y = 0-1), which were discovered in the research group of Prof. Müller-Buschbaum et al., were synthesized by using a melt-synthesis route. Hereby, the emphasis was on the investigation of photoluminescence properties of the networks, most notably the color tuning properties based on Ln3+centered emission of the solid solution in the color range from green to red. Additionally, systematic investigations were performed on the networks for the determination of high-temperature dependent structural changes, leading to the structural characterization of the structural condensation products 3∞[LaCl3(bipy)], 2∞[Ln3Cl9(bipy)3] with Ln = Pr, Sm, 2∞[Ho2Cl6(bipy)2] and 2∞[Gd2Cl6(qtpy)(bipy)]·(bipy). The transfer of the solvothermal reaction route with the use of pyridine as solvent on the ligands dipyridylethene (dpe) and -ethane (dpa) was successful, also leading to luminescent coordination polymers in 2∞[La2Cl6(dpe)3(py)2]·(dpe), 1∞[LnCl3(dpe)(py)2]·0.5(dpe)0.5(py) wih Ln = Eu, Gd, Er, 2∞[LaCl3(dpa)2]·(dpa) and 1∞[LnCl3(dpa)(py)2]·0.5(dpa)0.5(py) with Ln = Gd, Er. The shortening of the bipy ligand by using diazines, like pyrazine (pyz), pyrimidine (pym) and pyridazine (pyd) as connector ligands, resulted in the extension of coordination compounds based on LnCl3 and diazine building blocks. Therefore, complexes and coordination polymers like 3∞[LaCl3(pyz)], [Ln2Cl6(pyz)(py)6]·2(pyz) with Ln = Sm, Er, 1∞[Sm2Cl6(μ-pym)2(pym)3]·(pym), [Er2Cl6(pym)6] and [ErCl3(η-pyd)(pyd)2] were discovered and characterized. Furthermore, first basic luminescence properties of the used ligands and their interaction with Ln3+-ions were investigated. KW - Lanthanoide KW - Metallorganisches Netzwerk KW - Polymerkomplexe KW - Photolumineszenz KW - Leuchtstoff KW - Lanthanoide KW - MOF KW - Koordinationspolymer KW - Azine / Diazine KW - Photolumineszenz KW - lanthanides KW - coordination polymer KW - metal-organic frameworks KW - photoluminescence KW - azines / diazines Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-109519 ER - TY - THES A1 - Hupp, Florian T1 - Synthese und Reaktivität ausgewählter Platin(0)-Addukte von Gruppe 14/15 Halogeniden T1 - Synthesis and reactivity of selected platinum(0) adducts of group 14/15 halogenides N2 - Im Rahmen dieser Arbeit wurden Addukte zwischen dem elektronenreichen, späten Übergangsmetallkomplex Bisphosphanplatin(0) und Lewis-Säuren aus der Gruppe 14 und 15 dargestellt, sowie deren Reaktivität untersucht. Hier sind insbesondere die Darstellung und Untersuchung kationischer Komplexe zu erwähnen. Es konnten erfolgreich Addukte zwischen homoleptischen Platin(0) und heteroleptischen Platin(0)komplexen mit divalenten Gruppe 14 Chloriden (GeCl2, SnCl2 und PbCl2) dargestellt werden (Schema 50). Die Charakterisierung der Verbindungen [(IMes)(Cy3P)Pt–ECl2] (46–48) und [(Cy3P)2Pt–EX2] (50–53) erfolgte über multinukleare NMR-Spektroskopie und Röntgendiffraktometrie. Für die Stannylen- und Plumbylenaddukte konnten ebenfalls Diplatinaddukte [{(Cy3P)2Pt}2(μ2-EX2)] (54–57) dargestellt werden. Untersuchungen der Monoplatinkomplexe mittels Röntgendiffraktometrie ergaben einen erheblichen Grad der Pyramidalisierung um die Gruppe 14 Zentren. Das Germylenaddukt ist dabei der am höchsten pyramidalisierte Pt=EX2 Komplex, der bisher strukturell untersucht wurde.Die Koordination der Pt(0)einheiten in den Diplatinkomplexen wurde mittels 31P{1H}-NMR-Spektroskopie und UV-Vis-Spektroskopie bei variablen Temperaturen sowie DFT Rechnungen untersucht. Während im Diplatin-Stannylenkomplex 55 beide Pt–Sn-Bindungen stabil sind, verliert der Diplatin-Plumbylenkomplex 57 reversibel ein Pt(0)-Fragment bei hohen Temperaturen (RT). Die quantenchemischen DFT-Analysen des Plumbylens 53 ergaben, dass die berechnete σ-Hinbindung in der Richtung Pt→Pb deutlich stärker ausgeprägt ist und die σ-Rückbindung in der Richtung Pt←Pb kaum Bindungsanteile ausmacht. Somit entspricht der Bindungscharakter in Verbindung 53, wenn überhaupt, nur partiell dem einer Doppelbindung. Die vorherrschende Wechselwirkung ist die Pt→Pb σ-Donation. Transferexperimente bewiesen die erhöhte Lewis-Basizität im heteroleptischen Platin(0)fragment, außerdem konnte erfolgreich in einem Addukt der Ligand (PCy3 vs. IMes) ausgetauscht werden, was die Stabilität der Pt–E-Bindung beweist (Schema 50).Der synthetische Zugang zu niedrig koordinierten Sn- und Pb- Mono- und Dikationen wird allgemein durch die schlechte Löslichkeit und die hohe elektrophile Natur dieser Teilchen eingeschränkt. Durch die Reaktion der Germylen, Stannylen und Plumbylen Monoplatinaddukte (50–53) mit Aluminiumtrihalogeniden gelang es jedoch, solche niedrig koordinierten Monokationen [(Cy3P)2Pt–EX]2[AlX4]2 (64a = Sn, Br; 70a = Pb, Cl) in der Koordinationssphäre von Platin(0) darzustellen. Durch Abstraktion eines weiteren Halogenides mittels AlX3 konnten sogar bisher unbekannte niedervalente Komplexe [(Cy3P)2Pt–E][AlX4]2 (68 = Sn, Br; 75 = Pb, Cl) mit einem dikationischen Zinn- beziehungsweise Bleizentrum in der Koordinationssphäre eines Übergangsmetalles isoliert werden (Schema 51).Da durch die Stellung im Periodensystem kein vakantes p-Orbital vorhanden ist, reagieren Elementverbindungen der Gruppe 15 normalerweise nicht als Lewis-Säuren. Eine Reaktivitätsuntersuchung von hypervalenten Lewis-Säuren aus der späten Hauptgruppe mit elektronenreichen späten Übergangsmetallverbindungen stand daher noch aus. Es gelang eine Lewis-Säuren-unterstützte Transformation von Platin(0) und Phosphor(V)fluorid in eine Pt(II)/P(III)-Verbindung der Form trans-[(Cy3P)2Pt(F)(PF3)][PF6] (91) (Schema 52). Die Bildung einer stabilen Pt–PF3 Enheit mit starken σ-/π-Bindungen liefert die Triebkraft der Reaktion. Die Reaktivitätstudien von Antimon(III)halogeniden mit Platin(0)-Komplex ergaben sowohl die Bildung eines zweifach Pt(0)-basenstabiliserten Stiboniumkations, als auch das Produkt der oxidativen Addition. Beide Reaktionen wurden per multinuklearer NMR-Spektroskopie und Röntgendiffraktometrie bestätigt. Die Bildung des Diplatin-Stibeniumkations [{(Cy3P)2Pt}2(μ-SbF2)]+ (94) ist das erste Beispiel für ein MOLP mit einer antimonzentrierten Lewis-Acidität, wohingegen die Bildung des oxidativen Dihalostibanylkomplexes trans-[PtCl(SbCl2)(PCy3)2] (97) das erste Beispiel einer oxidativen Addition einer Sb–X-Bindung an ein Übergangsmetallzentrum ist (Schema 52). N2 - The results of this work can be summarized as follows. Adducts between the electron-rich Lewis-base [(Cy3P)2Pt] (10) and Lewis-acids from groups 14 and 15 were synthesized and their reactivity investigated, especially the formation of cationic species. The adducts were successfully obtained by the reaction of homoleptic and heteroleptic platinum(0)compounds and divalent group 14 chlorides (GeCl2, SnCl2 and PbCl2). The characterization of the compounds (IMes)(Cy3P)Pt–ECl2] (46–48) and [(Cy3P)2Pt–EX2] (50–53) was possible by multinuclear NMR spectroscopy and X-ray crystal diffraction analysis. For the stannylene and plumbylene adducts the bisplatinum analogues [{(Cy3P)2Pt}2(μ2-EX2)] (54–57) could also be isolated (Scheme 1). The Monoplatinum compounds exhibit a large degree of pyramidalization at the Group 14 centers. Compound 3a was found to be the most highly pyramidalized M=ER2 complex ever structurally characterized. The addition of a second platinum moiety was studied by 31P{1H} NMR spectroscopy and UV-Vis spectroscopy at variable temperatures as well as DFT calculations. The Pt-Sn bond of the bisplatinum stannylene complex 55 is robust. Nevertheless, the bisplatinum plumblyene compound complex 57 loses reversibly one Pt fragment at high temperature (RT). DFT calculations of the plumbylene compound 53 showed, that the calculated Pt→Pb σ-bond is much stronger than the calculated Pt←Pb σ-back-bond. Thus the character of the Pt–Pb bonding in the compound 53 corresponds if at all, only partially with that of a double bond. The predominant binding interaction is the Pt→Pb σ-donation. Transfer experiments revealed the higher Lewis-basicity of the heteroleptic platinum(0) vs that of the homoleptic platinum(0) fragments. The stability of the Pt–E bond was confirmed by the ligand exchange PCy3 vs IMes on the adduct compounds. Synthetic access to low-coordinate Pb mono- and dications is in general impeded due to their poor solubility and highly electrophilic nature. However, the electrophilicity of these cations can be tamed by attaching them to electron-rich transition metals. Monostannylene and -plumbylene complexes were treated with AlX3 to afford the cationic platinum complexes [(Cy3P)2Pt–EX]2[AlX4]2 (64a = Sn, Br; 70a = Pb, Cl). The abstraction of another halide with AlX3 led to the isolation of the unprecedented low-valent compounds [(Cy3P)2Pt–E][AlX4]2 (68 = Sn, Br; 75 = Pb, Cl) containing a dicationic tin or lead centre.Since no vacant p-orbital is available, through the position in the periodic table, group 15 compounds react normally not as Lewis-acids. Hence, the reactivity of hypervalent Lewis-acids from the late main group with electron-rich late transition metal complexes are still under investigation. The Lewis-acid supported transformation of bisphosphineplatinum(0) and phosphorus(V)fluoride into the mixed Pt(II)/P(III) compound trans-[(Cy3P)2Pt(F)(PF3)][PF6] (91) was successfully carried out (Scheme 3). The formation of a stable Pt–PF3 unit with strong σ-/π-bonds provides the driving force for the reaction.Extended studies towards the antimony trihalides with platinum(0), revealed the first example of unambiguous, unsupported MOLP chemistry of antimony-centered ligands, as well as the first evidence of an oxidative addition. Both reactions were studied by multinuclear NMR spectroscopy as well as X-ray diffraction analysis. The formation of the cationic stibenium complex [{(Cy3P)2Pt}2(μ-SbF2)]+ (94), is the first example for an unsupported metal-only Lewis pair containing an antimony-centered Lewis acid. In contrast, the dihalostibanyl complex trans-[PtCl(SbCl2)(PCy3)2] (97), is the first example of an oxidative addition of an antimony-halide bond to a transition metal (Scheme 3). KW - Metallorganische Verbindungen KW - Adduktbildung KW - Hauptgruppenelement KW - Platinkomplexe KW - Platinaddukte KW - Metall-zentrierte Lewis-Paare KW - Metal-only Lewis-Pairs KW - Adduct Complex KW - Organometallverbindungen Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-108766 ER - TY - THES A1 - Mies, Jan T1 - Ansa-Verbindungen von Pianostuhlkomplexen der Übergangsmetalle und Alkinanaloge Verbindungen des Bors — Darstellung und Reaktivitätsstudien T1 - Ansa-halfsandwich complexes of piano stool transition metal complexes and alkyne-type compounds of boron - synthesis and reactivity studies N2 - Im Rahmen dieser Arbeit konnten im Ersten Teil durch Anwendung verschiedener Synthesestrategien neuartige ansa-Halbsandwichkomplexe der sechsten, achten und zehnten Gruppe der Übergangsmetalle synthetisiert und umfassend charakterisiert werden. Die dargestellten Verbindungen wurden in Reaktivitätsstudien auf ihr Verhalten gegenüber Chalkogenen, sowie gegenüber niedervalenten späten Übergangsmetallkomplexen untersucht. Weiterhin wurden die erhalten Komplexe auf ihrer Eignung als mögliche Vorstufen für metallhaltige Polymere hin untersucht. Dabei wurden verschiedene Polymerisationsmethoden wie thermische, katalytische oder anionische induzierte Ringöffnungsreaktion eingesetzt und die erhaltenen Polymere mit Hilfe der Gelpermeations-Chromatographie auf ihr Molekulargewicht bzw. auf ihre Polydisperisität hin untersucht. Im zweiten Teil dieser Arbeit konnten verschiedene neuartige Basenaddukte von Tetrabromdiboran(4) dargestellt und charakterisiert werden. Durch schrittweise Reduktion gelang die Synthese basenstabilisierter neutraler Diborene auf einer bisher unbekannten Syntheseroute. Durch die erschöpfende Reduktion von [B2Br4(IDip)2] konnte erstmals ein basenstabilisiertes Diborin außerhalb einer inerten Edelgasmatrix isoliert und charakterisiert werden. Zum Verständnis der Bindungssituation sowie der Konstitution in Lösung und Festkörper wurden umfangreiche physikochemische und theoretische Studien angefertigt. Die erhaltenen Daten belegen die Synthese von [B2(IDip)2] mit einer Bindungsordnung von drei entlang der zentralen B2-Einheit. Es wurden umfangreiche Reaktivitätsstudien gegenüber verschiedenen Substraten durchgeführt. Die Umsetzung von [B2(IDip)2] mit CO lieferte ein basenstabilisiertes Bis-boralacton, bei dessen Bildung eine gänzlich unbekannte CO-Verknüpfungsreaktion auftritt, welche für Hauptgruppenelementverbindungen bisher nicht beobachtet werden konnte. Im Zuge mechanistischer Studien gelang der Nachweis eines Reaktionsintermediates. Weiterhin zeigt das Diborin [B2(IDip)2] (140) eine interessante Koordinationschemie gegenüber Kupfer(I)-Verbindungen. Dabei gelang die Darstellung von tri- und dinuklearen Kupfer(I)-Komplexen von [B2(IDip)2]. Diese wurden durch multinukleare NMR-Spektroskopie sowie mit Hilfe der Röntgenstrukturanalyse umfassend charakterisiert. N2 - Within the scope of this work, novel base adducts of phospanes and NHC ligands with tetrabromodiborane(4) were synthesized and fully characterized. Subsequent two electron-reduction of the latter yields novel base stabilized diborenes. Full reduction of [B2Br4(IDip)2] with four equivalents of sodium naphthalenide, yielded the diboryne [B2(IDip)2] which is the first example of a triply-bound B2 unit stable at ambient temperature. Crystallographic and spectroscopic characterizations confirmed that the latter is a halide-free linear system containing a boron-boron triple bond. In the course of reactivity studies of the diboryne towards various substrates a novel coupling reaction between [B2(IDip)2] and 4 CO-molecules was be observed, leading to a base-stabilized bis(bora)lactone which was isolated and fully characterized. Furthermore, an intermediat of the reaction pathway incorporating a single CO-molecule was isolated and characterized by X-ray diffraction and multinuclear NMR. Reactions with coinage-metal precusors lead to di and trinuclear coordination compounds. The geometry of both complexes were investigated by X-ray diffraction and multinuclear NMR. The bonding situation was studied by DFT-calculations. ... KW - Bor KW - Halbsandwich-Verbindungen KW - Dreifachbindung KW - Bor KW - Diborin KW - Ansa Halbsandwich Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-93652 ER - TY - THES A1 - Philipp, Michael Stephan Maria T1 - N-Heterocyclic Carbenes and Cyclic (Alkyl)(amino)carbenes as Ligands for p-Block Element Compounds T1 - N-Heterocyclische Carbene und Cyclische (Alkyl)(amino)carbene als Liganden für p-Block-Element-Verbindungen N2 - In der vorliegenden Arbeit wird die Synthese und Reaktivität neuer NHC- und cAAC-stabilisierter Lewis-Säure/Lewis-Base-Addukte von Verbindungen mit Elementen der Gruppen 14 und 15 beschrieben. N2 - This thesis reports on synthesis and reactivity of new NHC- and cAAC-stabilized Lewis-acid/Lewis-base adducts of group 14 and group 15 element compounds. KW - Lewis-Addukt KW - Heterocyclische Carbene <-N> KW - NHC KW - cAAC KW - p-Block Elements Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-289295 ER - TY - JOUR A1 - Ramler, Jacqueline A1 - Schwarzmann, Johannes A1 - Stoy, Andreas A1 - Lichtenberg, Crispin T1 - Two Faces of the Bi−O Bond: Photochemically and Thermally Induced Dehydrocoupling for Si−O Bond Formation JF - European Journal of Inorganic Chemistry N2 - The diorgano(bismuth)alcoholate [Bi((C\(_{6}\)H\(_{4}\)CH\(_{2}\))\(_{2}\)S)OPh] (1-OPh) has been synthesized and fully characterized. Stoichiometric reactions, UV/Vis spectroscopy, and (TD-)DFT calculations suggest its susceptibility to homolytic and heterolytic Bi−O bond cleavage under given reaction conditions. Using the dehydrocoupling of silanes with either TEMPO or phenol as model reactions, the catalytic competency of 1-OPh has been investigated (TEMPO=(tetramethyl-piperidin-1-yl)-oxyl). Different reaction pathways can deliberately be addressed by applying photochemical or thermal reaction conditions and by choosing radical or closed-shell substrates (TEMPO vs. phenol). Applied analytical techniques include NMR, UV/Vis, and EPR spectroscopy, mass spectrometry, single-crystal X-ray diffraction analysis, and (TD)-DFT calculations. KW - Bismuth KW - dehydrocoupling KW - radical reactions KW - chalcogens KW - catalysis Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-257428 VL - 2022 IS - 7 ER - TY - THES A1 - Kerpen, Christoph T1 - – CYANOBORATE – Salze reaktiver Kationen sowie Übergangsmetallverbindungen T1 - – CYANOBORATES – Salts of reactive cations and transition metal compounds N2 - Die hier vorliegende Arbeit behandelt die Synthese und Charakterisierung neuer Übergangsmetall-Borate sowie auf Cyanoborat-Anionen basierende Übergangsmetallkomplexe und Koordinationsverbindungen mit N-Donor-Liganden und Triphenylphosphan. N2 - This work outlines the synthesis and characterization of novel transition metal borates as well as transition metal complexes based on cyanoborate anions and coordination compounds with N-donor ligands and triphenylphosphine. KW - borate KW - Transition metal KW - Cyanoborate KW - Übergangsmetallverbindungen KW - Cyclovoltammetrie KW - Phosphankomplexe KW - Koordinationspolymere Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-163974 ER - TY - THES A1 - Stoy, Andreas T1 - Darstellung, Charakterisierung und Reaktivität von NHC-stabilisierten 1,2-Dihalogendiborenen T1 - Preparation, characterization and reactivity of NHC-stabilized 1,2-dihalodiborenes N2 - Im Rahmen der vorliegenden Arbeit konnte eine Reihe symmetrischer und asymmetrischer Tetrahalogendiboran(4)-Addukte realisiert werden. Die symmetrischen Brom-substituierten Vertreter 19 und 102–107 waren durch quantitativen Ligandenaustausch der schwach gebundenen Lewis-Base SMe2 von 101 zugänglich. Im Falle der IDip-stabilisierten Addukte 108 bzw. 109a/b gelang die Darstellung in sehr guten Ausbeuten durch direkte Umsetzung von freiem Carben mit den Tetrahalogendiboran(4)-Vorstufen 1 (X = Cl) bzw. 2 (X = I). Die asymme¬trischen Vertreter 113a–116b konnten durch sukzessive Adduktbildung ausgehend von 1 bzw. 6 mit cAAC und dem jeweiligen NHC bei tiefen Temperaturen (−78 °C) in moderaten bis guten Ausbeuten dargestellt werden. Nachfolgende Reduktionsversuche der asymmetrischen Addukte 113a/b und 114b–116b waren von mäßigem Erfolg geprägt. Als Reduktionsmittel wurden Alkali- bzw. Erdalkalimetalle, Interkallationsverbindungen und Übergangsmetallkomplexe eingesetzt. Zwar war in allen Fällen eine deutliche Farbänderung beobachtbar, die, zusammen mit den beobachteten Resonanzen in den 11B-NMR-Spektren, die Synthese von asymmetrischen Diborenen nahelegten, jedoch gelang die Isolierung der Diborene nicht. Hierbei gestaltete sich die Abtrennung der gebildeten Nebenprodukte als problematisch. Deutlich selektiver verliefen hingegen die Reduktionen der symmetrischen Tetrahalogen-diboran(4)-Bis(Addukte) mit NaNaph bei tiefen Temperaturen (−78 °C). Hierbei gelang es, das Portfolio der bereits bekannten Vertreter dieser Substanzklasse zu erweitern. So konnten die Brom-substituierten Diborene 126–128 erstmals vollständig charakterisiert werden. Der Einfluss der Halogenatome auf die chemischen und physikalischen Eigenschaften der Diborene wurde ferner an zwei Beispielen der IDip-stabilisierten Diborene 129 und 130 untersucht. Bei identischem NHC, aber unterschiedlichen Halogenen, konnten die Eigenschaften der Diborene 21, 129 und 130 näher untersucht und miteinander verglichen werden. Besonders deutlich werden die Redoxeigenschaften der Diborene von der Art des gebundenen Halogens beeinflusst, wie cyclovoltammetrische Untersuchungen belegen. Alle NHC-stabilisierten 1,2 Dihal¬ogen¬diborene konnten ferner anhand ihrer physikalischen Eigenschaften eingeordnet und miteinander verglichen werden. Neben der Synthese und Charakterisierung neuartiger Diborene wurden auch verschiedene Reaktivitätsstudien durchgeführt. So konnten die Diborene 21, 123, 126 und 129 mit CO2 unter milden Bedingungen umgesetzt werden, wobei verschiedene Reaktionsprodukte nachgewiesen wurden. Der initiale Schritt umfasste in allen Fällen eine [2+2]-Cycloaddition die zu den Dibora-β-Lactonen 131a–134a führte, von denen 131a und 132a vollständig charakterisiert werden konnten. Im weiteren Reaktionsverlauf wurden jedoch Isomerisierungsreaktionen von 132a–134a bei Raum¬temperatur beobachtet, wobei die 2,4 Diboraoxetan 3 one 132b–134b isoliert wurden. Bedingt durch die verhältnismäßig langsame Umsetzung von 21 zu 132a konnte die [2+2] Cyclo¬addition mittels 1H-VT-NMR-Spektroskopie verfolgt werden, wobei die Rückgrat¬protonen der NHCs als selektive Sonde dienten. Eine bemerkenswert hohe Stabilität konnte für 131a bei Raumtemperatur beobachtet werden, bei der keine Anzeichen einer Umlagerung nachweisbar waren. Die angefertigten quantenchemischen Untersuchungen zum Reaktions¬mechanismus legen eine höhere Energiebarriere des Schlüsselschrittes der Umlagerungs¬reaktion für 131a als für 132a nahe, womit die Stabilität von 131a erklärbar ist. Ferner konnten beim Erhitzen von 131a für 16 Stunden auf 60 °C kurzlebige Intermediate in Form eines Oxoborans und Borylens, die im Laufe der Isomerisierungsreaktion der Dibora-β-Lactonen zu den 2,4 Diboraoxetan 3 onen auftreten, 11B NMR-spektroskopisch nachgewiesen werden. Hierdurch wurde ein weiteres Indiz gewonnen, dass die Richtigkeit des postulierten Reaktionsmechanimus verdeutlicht. Die reduzierende Wirkung der Diborene konnte mit der Darstellung von Radikalkationen demonstriert werden. Hierbei erfolgte die Umsetzung der Diborene 21, 123–126 und 128 mit [C7H7][BArF4] zu 138–143 in guten bis sehr guten Ausbeuten. Die gebildeten Radikale konnten vollständig charakterisiert werden und sind wegen ihrer Eigen¬schaften gut mit bereits literaturbekannten Vertretern dieser Substanzklasse vergleichbar. Versuche die Radikalkationen durch Umsetzung der Diborene mit [C7H7][BF4] darzustellen scheiterten an der Zersetzung während der Aufarbeitung, wodurch die Wichtigkeit des schwach koordinierenden Anions verdeutlich wird. Entgegen der Erwartungen wurden beim Vergleich der ESR-Spektren der dargestellten Radikalkationen mit bekannten Analoga deutlich unterschiedliche giso-Werte ermittelt, die auf den starken Einfluss der Bromatome zurückzuführen sind. Des Weiteren war es möglich, eine Korrelation zwischen den Strukturparametern in der Festphase und den UV/Vis-Absorptionsmaxima in Lösung nachzuweisen, wonach für diejenigen Radikale die stärkste Blauverschiebung beobachtet wurde, die den größten Diederwinkel α, zwischen den B2Br2-Ebenen und den CN2C2-Carben-ebenen, aufwiesen. In weiteren Studien wurden die Redoxeigenschaften der Diborene durch Umsetzung von 21 und 123–125 mit elementaren Chalkogenen unter milden Reaktionsbedingungen untersucht. So konnten durch Umsetzung der Diborene mit elementarem Schwefel die Diborathiirane 144–147 in moderaten bis guten Ausbeuten erhalten werden. Trotz eines großen Überschusses an Schwefel wurde aber keine vollständige BB-Bindungsspaltung beobachtet. Auf analoge Weise wurden die Diboraselenirane 148, 150 und 151 durch Umsetzung mit rotem Selen in moderaten bis guten Ausbeuten synthetisiert. Deutliche Unterschiede zeigten sich aber beim IDep-stabilisierten Diboren 123, das ein radikalisches Seleniran ausbildete. Überschüs¬siges Selen begünstigt vermutlich eine Folgeoxidation des in situ gebildeten Diboraselenirans, die jedoch für die anderen Verbindungen dieser Substanzklasse nicht beobachtbar war. Interessanterweise wurde bei allen Dipp-substituierten Verbindungen (Diborathiirane 144 und 146 sowie Dibora¬selenirane 148 und 151) das Fehlen einer Dipp-Gruppe der stabilisierten NHC-Basen im 1H NMR-Spektrum nachgewiesen. Dieser Umstand konnte durch eine eingeschränkte Rotation um die BC-Bindungsachse mittels 1H-VT-NMR-Spektrum aufgeklärt werden, wobei die Rotationsbarriere exemplarisch für 144 13.9 ± 1 kcal/mol beträgt. Eine bemerkenswerte Reaktivität der 1,2-Dibromdiborene 21 und 123–126 wurde gegenüber hetero¬aroma¬tischer Stickstoffbasen beobachtet. Mit einem großen Überschuss an Pyridin konnte ein Bromidanion aus den Diborenen verdrängt werden, wodurch die Diborenkationen 154–158 in moderaten bis guten Ausbeuten erhalten wurden. Die Abtrennung der dabei unvermeidlich gebildeten NHC-Salze gestaltete sich als schwierig, allerdings gelang es, nach einer in situ Deprotonierung mit NaHMDS die freien NHCs zu entfernen. Versuche der Deri-vatisierung mit anderen aromatischen Basen wie 2- bzw. 4-Picolin, Chinolin oder 2,2’-und 4,4’-Bipyridin scheiterten. Erfolgreich konnte DMAP eingesetzt werden, wodurch es möglich war, die Diborenkationen 160–162 in guten bis sehr guten Ausbeuten zu erhalten. Interessanterweise zeigen 154–158 teils deutliche solvatochrome Absorptions¬eigenschaften in den UV/Vis-Spektren. Im Laufe der Umsetzung von 125 mit Pyridin konnte durch angepasste Reaktions¬bedingungen das Dikation 159 in moderaten Ausbeuten isoliert werden. Dessen bemerkenswerte Stabilität zeigte sich durch eine ausgeprägte Widerstands¬fähigkeit gegenüber Sauerstoff und Luftfeuchtigkeit über mehrere Wochen. Weiterführende Unter¬suchungen der Festkörperstruktur von 159 zeigen Bindungsparameter, die trotz der ionischen Natur der Verbindung, nur geringfügig von denen des neutralen Diborens 125 abweichen. Mittels Raman-Spektroskopie konnten des Weiteren die BB-Bindungsstärke in 159 näher bestimmt werden, die mit einer Kraftkonstante von 470 N/m nahezu identisch zu der des neutralen Dibores (465 N/m) ist, was Rückschlüsse auf die Lokalisierung der positiven Ladungen auf den Pyridinringen zulässt. Aus diesem Grund kann Verbindung 159 als bis dato einziges Beispiel eines luft- und feuchtigkeitsstabilen Diborens bezeichnet werden. N2 - Within the scope of this work, a series of symmetrical and unsymmetrical tetrahalodiborane(4) adducts were synthesized. The symmetrical, bromine-substituted compounds 19 and 102–107 were accessible by quantitative ligand exchange of the weakly-bound Lewis base SMe2 in 101. The IDip-stabilized adducts 108 and 109a/b, were prepared in excellent yields by direct addition of free carbene to the tetrahalodiborane(4) precursors 1 (X = Cl), and 2 (X = I), and respectively, the unsymmetrical adducts 113a–116b could be prepared in moderate to good yields by stepwise addition of cAAC and the corresponding NHC to 1 or 6 at low temperatures (−78 °C). Subsequent attempts to reduce the asymmetric adducts 113a/b and 114b–116b with reagents such as alkali, or alkaline earth metals, intercalation compounds, and transition metal complexes were moderately successful. Although a change in colour was observed in all cases, which, together with the observed resonances in the 11B-NMR spectra, suggested the synthesis of unsymmetrical diborenes, their isolation was unsuccessful. Here, the separation of the byproducts proved to be problematic. In contrast, the reductions of the symmetrical tetrahalodiborane(4) bis(adducts) with NaNaph at low temperatures (−78 °C) were much more selective. Here, we succeeded in expanding the scope of known representatives of this substance class. Thus, the bromine-substituted diborenes 126–128 could be fully characterized for the first time. The influence of the halides on the chemical and physical properties of the diborenes were further investigated using two examples of IDip-stabilized diborenes 129 and 130. The properties of 21, 129 and 130, which represent diborenes with identical NHCs but different halides, were studied in more detail and compared with each other. The redox properties of the diborenes are particularly influenced by the nature of the halide, as emphasized by cyclo¬voltammetric studies. All NHC-stabilized 1,2-dihalodiborenes were also classified and compared with each other based on their physical properties. In addition to the synthesis and characterization of novel diborenes, a range of reactivity studies were also performed. For example, when diborenes 21, 123, 126, and 129 were reacted with CO2 under mild conditions, a variety of products were obtained. In all cases the initial step involved a [2+2] cycloaddition leading to the dibora-β-lactones 131a–134a, of which 131a and 132a were fully characterized. However, in the further course of the reaction, isomerization of 132a–134a took place, leading to the formation of the 2,4-diboraoxetane-3-ones 132b–134b. Thanks to the relatively slow conversion of 21 to 132a, the [2+2] cycloaddition could be monitored by variable-temperature 1H-NMR spectroscopy, with the backbone protons of the NHCs serving as viable probes. A remarkably high stability at room temperature was observed for 131a with no evidence of rearrangement. Quantum chemical studies of the reaction mechanism suggested a higher energy barrier for the key step of the rearrangement reaction for 131a relative to that of 132a. Furthermore, heating of 131a to 60 °C for 16 h led to the formation of short-lived intermediates in the form of an oxoborane and borylene, which occur in the course of the isomerization reaction of the dibora-β-lactones to the 2,4-diboraoxetane-3-one, and were detected by 11B-NMR spectroscopy. This provided a further indication that the postulated reaction mechanism is correct. The reducing properties of the diborenes were demonstrated by the preparation of the radical cations. Here, diborenes 21, 123–126, and 128 reacted with [C7H7][BArF4] to form 138–143 in good to excellent yields. The isolated radicals were fully characterized, and their properties are readily comparable with previously-reported representatives of this substance class. Attempts to prepare the radical cations by reacting diborenes with [C7H7][BF4] were accompanied by decomposition during workup, thus highlighting the importance of the weakly coordinating anion. Contrary to expectations, significantly different giso values were obtained when comparing the EPR spectra of the presented radical cations with known analogues, which could be attributed to the strong influence of the bromide atoms. Furthermore, it was possible to find a correlation between the structural parameters in the solid state and the UV/Vis absorption maxima in solution. The strongest blue shift was observed for those radicals that exhibited the largest dihedral angle α between the B2Br2 plane and the CN2C2-carbene planes. In further studies, the redox properties of diborenes were investigated by reacting 21 and 123–125 with elemental chalcogens under mild reaction conditions. This way, reaction of diborenes with elemental sulphur led to the formation of diborathiiranes 144–147 in moderate to good yields. Despite a large excess of sulphur, complete BB bond cleavage was not observed for any of these products. Analogously, diboraseleniranes 148, 150, and 151 were synthesized by reaction with red selenium in moderate to good yields. However, apparent differences were seen for the IDep-stabilized diborene 123, which in contrast to 21, 124 and 125 formed a radical diboraselenirane. Excess selenium presumably favors a subsequent oxidation of the in-situ-formed diboraselenirane, which however, was not observed for the other compounds of this substance class. Interestingly, one Dipp-group of the stabilizing NHC bases was not detected in the proton NMR spectrum for all Dipp-substituted compounds (diborathiiranes 144 and 146, and also diboraseleniranes 148 and 151). This circumstance could be explained by an inhibited rotation around the BC axis as verified by means of variable-temperature 1H-NMR spectroscopy, the rotation barrier exemplified by that of 144, which was found to be 13.9 ± 1 kcal/mol. A remarkable reactivity of 1,2-dibromodiborenes 21 and 123–126 was observed towards hetero¬aromatic nitrogen bases. With a large excess of pyridine, a bromide anion could be displaced, giving the diborene cations 154–158 in moderate to good yields. Separation of the NHC salts inevitably formed during this process proved to be difficult, but after in situ deprotonation with NaHMDS, it was possible to remove the free NHCs due to their substantially different solubilities. Attempts at derivatization with other aromatic bases such as 2- or 4-picoline, quinolone, or 2,2'-and 4,4'-bipyridine failed. However, addition of DMAP le to a successful halide substitution, making it possible to obtain the diborene cations 160–162 in good to excellent yields. Interestingly, 154–158 furthermore show partly distinct solvatochromic absorption properties in their UV/Vis spectra. In the course of the reaction of 125 with pyridine, the dication 159 was isolated in moderate yields by employing adjusted reaction conditions. Its remarkable stability was demonstrated by a pronounced resistance to oxygen and atmospheric humidity over a period of several weeks. Further studies of the solid-state structure of 159 show binding parameters that deviate only slightly from those of the neutral diborene 125, despite the ionic nature of the compound. Furthermore, by use of Raman spectroscopy, it was possible to determine the BB bond strength in 159 in more detail, which, with a force constant of 470 N/m, is almost identical to that of the neutral diborene (465 N/m). This result allows us to draw conclusions about the localization of the positive charges on the pyridine rings. For this reason, compound 159 represents a rare example of an air- and moisture-stable diborene. KW - Bor KW - Mehrfachbindung KW - Synthese KW - Eigenschaften KW - Reaktivität KW - Diboren KW - Carben Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-237818 ER - TY - JOUR A1 - He, Jiang A1 - Rauch, Florian A1 - Friedrich, Alexandra A1 - Sieh, Daniel A1 - Ribbeck, Tatjana A1 - Krummenacher, Ivo A1 - Braunschweig, Holger A1 - Finze, Maik A1 - Marder, Todd B. T1 - N-Heterocyclic Olefins as Electron Donors in Combination with Triarylborane Acceptors: Synthesis, Optical and Electronic Properties of D-π-A Compounds JF - Chemistry - A European Journal N2 - N‐heterocyclic olefins (NHOs), relatives of N‐heterocyclic carbenes (NHCs), exhibit high nucleophilicity and soft Lewis basic character. To investigate their π‐electron donating ability, NHOs were attached to triarylborane π‐acceptors (A) giving donor (D)–π–A compounds 1–3. In addition, an enamine π‐donor analogue (4) was synthesized for comparison. UV–visible absorption studies show a larger red shift for the NHO‐containing boranes than for the enamine analogue, a relative of cyclic (alkyl)(amino) carbenes (CAACs). Solvent‐dependent emission studies indicate that 1–4 have moderate intramolecular charge‐transfer (ICT) behavior. Electrochemical investigations reveal that the NHO‐containing boranes have extremely low reversible oxidation potentials (e.g., for 3, \(E^{ox}_{1/2}\) =−0.40 V vs. ferrocene/ferrocenium, Fc/Fc\(^+\), in THF). Time‐dependent (TD) DFT calculations show that the HOMOs of 1–3 are much more destabilized than that of the enamine‐containing 4, which confirms the stronger donating ability of NHOs. KW - donor-acceptor systems KW - electrochemistry KW - photophysical prosperties KW - N-heterocyclic olefins KW - triarylboranes Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204690 VL - 25 ER - TY - JOUR A1 - Böhnke, Julian A1 - Dellermann, Theresa A1 - Celik, Mehmet Ali A1 - Krummenacher, Ivo A1 - Dewhurst, Rian D. A1 - Demeshko, Serhiy A1 - Ewing, William C. A1 - Hammond, Kai A1 - Heß, Merlin A1 - Bill, Eckhard A1 - Welz, Eileen A1 - Röhr, Merle I. S. A1 - Mitric, Roland A1 - Engels, Bernd A1 - Meyer, Franc A1 - Braunschweig, Holger T1 - Isolation of diborenes and their 90°-twisted diradical congeners JF - Nature Communications N2 - Molecules containing multiple bonds between atoms—most often in the form of olefins—are ubiquitous in nature, commerce, and science, and as such have a huge impact on everyday life. Given their prominence, over the last few decades, frequent attempts have been made to perturb the structure and reactivity of multiply-bound species through bending and twisting. However, only modest success has been achieved in the quest to completely twist double bonds in order to homolytically cleave the associated π bond. Here, we present the isolation of double-bond-containing species based on boron, as well as their fully twisted diradical congeners, by the incorporation of attached groups with different electronic properties. The compounds comprise a structurally authenticated set of diamagnetic multiply-bound and diradical singly-bound congeners of the same class of compound. KW - chemical bonding KW - diradicals KW - organometallic chemistry KW - diborenes KW - carbenes KW - boron Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-160431 VL - 9 IS - Article number: 1197 ER - TY - JOUR A1 - Matthes, Philipp R. A1 - Schönfeld, Fabian A1 - Zottnick, Sven H. A1 - Müller-Buschbaum, Klaus T1 - Post-synthetic shaping of porosity and crystal structure of Ln-Bipy-MOFs by thermal treatment JF - Molecules N2 - The reaction of anhydrous lanthanide chlorides together with 4,4'-bipyridine yields the MOFs \(^{2}\)\(_{∞}\)[Ln\(_{2}\)Cl\(_{6}\)(bipy)\(_{3}\)]*2bipy, with Ln = Pr-Yb, bipy = 4,4'-bipyridine, and \(^{3}\)\(_{∞}\)[La\(_{2}\)Cl\(_{6}\)(bipy)\(_{5}\)]*4bipy. Post-synthetic thermal treatment in combination with different vacuum conditions was successfully used to shape the porosity of the MOFs. In addition to the MOFs microporosity, a tuneable mesoporosity can be implemented depending on the treatment conditions as a surface morphological modification. Furthermore, thermal treatment without vacuum results in several identifiable crystalline high-temperature phases. Instead of collapse of the frameworks upon heating, further aggregation under release of bipy is observed. \(^{3}\)\(_{∞}\)[LaCl\(_{3}\)(bipy)] and \(^{2}\)\(_{∞}\)[Ln\(_{3}\)Cl\(_{9}\)(bipy)\(_{3}\)], with Ln = La, Pr, Sm, and \(^{1}\)\(_{∞}\)[Ho\(_{2}\)Cl\(_{6}\)(bipy)\(_{2}\)] were identified and characterized, which can also exhibit luminescence. Besides being released upon heating, the linker 4,4'-bipyridine can undergo activation of C-C bonding in ortho-position leading to the in-situ formation of 4,4':2',2 '':4 '',4'''-quaterpyridine (qtpy). qtpy can thereby function as linker itself, as shown for the formation of the network \(^{2}\)\(_{∞}\)[Gd\(_{2}\)Cl\(_{6}\)(qtpy)\(_{2}\)(bipy)\(_{2}\)]*bipy. Altogether, the manuscript elaborates the influence of thermal treatment beyond the usual activation procedures reported for MOFs. KW - energy transfer KW - ligand KW - Ln-MOFs KW - luminescence crystal structure KW - metal-organic frameworks KW - shaping of porosity KW - thermal treatment KW - luminescence KW - crystal scructure KW - coordination polymers KW - solid state Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-148404 VL - 20 ER - TY - THES A1 - Kuntze-Fechner, Maximilian Wolfgang T1 - Reaktivität NHC-stabilisierter Nickel(0)-Komplexe in der C–F-Bindungsaktivierung von Polyfluoraromaten T1 - Reactivity of NHC-stabilized nickel(0) complexes in the C–F bond activation of polyfluoroarenes N2 - Die vorliegende Arbeit befasst sich mit der C–F Bindungsaktivierung von teil und perfluorierten Aromaten an NHC stabilisierten Nickel(0) Komplexen, sowohl in stöchiometrischen als auch in katalytischen Reaktionen. Der Fokus dieser Arbeit lag auf der Aufklärung der Mechanismen der C–F Bindungsaktivierungsschritte von teil und perfluorierten Aromaten an ein und zweifach NHC stabilisierten Nickel(0) Komplexen, auf dem Einsatz dieser Komplexe in katalytischen Kreuzkupplungs- und Borylierungsreaktionen sowie in der Aufklärung der Mechanismen solcher katalytischen Prozesse. Die im Rahmen dieser Arbeit erzielten Ergebnisse belegen wesentliche Unterschiede im Reaktionsverhalten von Nickel Komplexen in der C–F Bindungsaktivierung: Die Reaktionsmechanismen der mit zwei sterisch unterschiedlich anspruchsvollen NHC Liganden stabilisierten Nickel(0) Komplexe [Ni(iPr2Im)2] (1a) und [Ni(Mes2Im)2] (5) weisen deutliche Unterschiede auf. So erfolgt die Insertion von [Ni(iPr2Im)2] (1a), dem Komplex mit dem weniger anspruchsvolleren Carbenliganden iPr2Im, in die C–F-Bindung von C6F6 nach einem konzertierten und/oder NHC assistierten Reaktionsmechanismus, wohingegen der Nickel(0) Komplex 5 nach einem radikalischen und/oder NHC assistierten Reaktionsmechanismus insertiert. Die Experimente am einfach NHC stabilisierten Nickel(0) Komplex [Ni(Dipp2Im)(η6 C7H8)] 6 belegen, dass die C–F Bindungsaktivierung zunächst zu reaktiven mononuklearen Komplexen [Ni(Dipp2Im)(F)(ArF)] führt, die jedoch allmählich zu dinuklearen, Fluorido verbrückten Nickel(II) Komplexen dimerisieren, die katalytisch nicht aktiv sind. Erst die Aufspaltung dieser Dimere in mononukleare Komplexe mit terminalen Fluoridoliganden führt zur katalytischen Aktivität. Dabei hat sich gezeigt, dass 5 und 6 vergleichbar gute Katalysatoren in der Nickel vermittelten C–F Borylierung sind und der kritische Schritt der Katalyse die Bereitstellung eines katalytisch aktiven, dreifach koordinierten Nickel Komplexes der Form [Ni(NHC)(F)(ArF)] ist. N2 - The present work concerns the stoichiometric and catalytic C–F bond activation of partially and perfluorinated arenes with NHC nickel(0) complexes. A particular emphasis was placed on mechanistic investigations concerning the C–F bond activation step of these processes. Furthermore, the application of these complexes in catalytic cross-coupling and borylation reactions, was investigated, including mechanistic studies. The results obtained in this thesis demonstrate significant differences in the reaction behavior of nickel complexes in C–F bond activation: The reaction mechanism of the nickel(0) complexes [Ni(iPr2Im)2] (1a) and [Ni(Mes2Im)2] (5) stabilized by two NHC ligands with varying steric demands show clear differences. [Ni(iPr2Im)2] (1a), the complex with the less demanding carbene ligand, iPr2Im, inserts into the C–F bond of C6F6 by a concerted and/or NHC assisted reaction mechanism, whereas the nickel(0) complex 5 inserts according to a radical and/or NHC assisted reaction mechanism. The studies on the single NHC stabilized nickel(0) complex Ni(Dipp2Im)(η6 C7H8)] (6) show that C–F bond activation initially leads to reactive, mononuclear complexes of the type [Ni(Dipp2Im)(F)(ArF)], which dimerize to dinuclear, fluorido bridged nickel(II) complexes that are not catalytically active. Only cleavage of these dimers into mononuclear complexes with terminal fluorido ligands leads to catalytic activity. It was shown that 5 and 6 are comparatively good catalysts in the nickel mediated C–F bond borylation and the critical step in the catalysis is the provision of a catalytically active, three coordinated nickel complex of the type [Ni(NHC)(F)(ArF)]. KW - Borylierung KW - Aktivierung KW - Katalyse KW - NHC KW - C-F-Bindungsaktivierung KW - C-F Borylierung KW - Nickel-Komplexe KW - C-F bond activation KW - nickel KW - C-F borylation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-211597 ER - TY - THES A1 - Thiess, Torsten T1 - Synthese und Reaktivität von 1,4-Diaza-2,3-diborininen T1 - Synthesis and reactivity of 1,4-diaza-2,3-diborinines N2 - In der vorliegenden Arbeit wurde die Synthese, Funktionalisierung und Reaktivität von 1,4,2,3-Diazadiborininen untersucht. Zu Beginn sollten Bis(dimethylamino)-substituierte Diazadiborinine mit unterschiedlichen Resten an den Stickstoffatomen dargestellt werden, deren weitere Funktionalisierung später im Fokus stand. Die Synthese erfolgte durch Reduktion von 1,4-Diazabutadienen mit elementarem Lithium und anschließender Salzeliminierungsreaktion mit B2(NMe2)2Cl2. Dadurch ließen sich die monocyclischen vier N,N’-Diaryl-substituierten Diazadiborinine sowie ein Alkyl-substituiertes Diazadiborinin darstellen. Durch etablierte Methoden der Diboran(4)-Chemie wurden diese in ihre Halogenderivate (Cl, Br, I) überführt. Aus diesen konnten drei 2,3-Diazido-1,4,2,3-diazadiborinine durch Umsetzung mit TMSN3 aus den Dihalogenderivaten dargestellt werden. Diese stellen hierbei die ersten isolierten Diboran(4)azidverbindugen dar. Ebenso gelang die Synthese eines bicyclischen Naphthalinisosters, welches erneut erfolgreich in seine Halogenderivate sowie das Diazdidoderivat überführt werden konnte. Einen Einblick in den Mechanismus der 1,4,2,3-Diazadiborininbildung ermöglichte die Isolierung eines Diazadiboretidinintermediats, welches durch doppelte Salzeliminierung entsteht. Dieses erwies sich jedoch als metastabil und lagerte zum Sechsring Diazadiborinin um. Quantenchemische Berechnungen unterstutzten die experimentellen Befunde. Über Kommutierungsreaktionen konnte eine Vielzahl an B,B‘-unsymmetrisch substituierten Diazadiborininen dargestellt und isoliert werden, wobei je nach verwendeten Startmaterialien entweder Gleichgewichtsreaktionen oder quantitative Umsetzungen beobachtet wurden. Ebenso wurde die Reaktivität der neuartigen Diazidodiborane(4) gegenüber Lewis-Basen untersucht. Sowohl das monocyclische Diazadiborinin, als auch das Benzodiazadiborinin konnten mit NHC-Basen zu den fünf verschiedenen Addukten umgesetzt werden. Unter thermischer Belastung wurde bei den monocyclischen Addukten eine Staudinger-artige Reaktion beobachtet, die unter Freisetzung von N2 zur Bildung von Guanadin-substituierten Diborane(4) führte. Die Benzodiazadiborininaddukte zeigten jedoch eine gänzlich andere Reaktivität. Hier fand eine Ringverkleinerungsreaktion unter Bildung von Diazaborolen statt, welche unter Wanderung einer Azidfunktion auf das NHC-stabilisierte Boratom gebildet wurden. Auf diese Weise konnten drei 1,1-Diamino-2,2-diazidodiborane(5) isoliert werden. Während bei der Umsetzung des Naphtalenderivats mit cAAC keine selektive Reaktion beobachtet wurde, reagierte das monocyclische Diazadiborinin mit zwei Äquivalenten cAAC. Hier bedingte das erste Carbon eine Staudinger-artige Reaktion, die unter Distickstofffreisetzung zu einem Formamidin führte. Die zweite Azidgruppe wurde am $\gamma$-Stickstoffatom von einem weiteren Äquivalent cAAC koordiniert. In weiteren Reaktivitätsstudien wurde die Generierung von transienten Iminoboranen aus Diazidodiazadiborininen untersucht. Die Diazide zeigten bei Temperaturen von über 150 °C ein sehr selektives Reaktionsverhalten und gingen unter Freisetzung von Distickstoff zu 1,3,2,4-Diazadiboretidin über, wobei dies über die Dimerisierung eines intermediär gebildeten siebengliedrigen, endocyclischen Iminoborans verlief. Der Mechanismus zur Bildung der transienten Iminoborane wurde anhand zweier möglicher Bildungswege mit quantenchemischen Methoden untersucht. Im letzten Kapitel wurde die Reaktivität des Dihydrodiazadiborinins gegenüber NHC- und cAAC-Lewis-Basen untersucht. Die Umsetzung mit cAAC führte zu einer B–H-Bindungsaktivierung durch das Carbenkohlenstoffatom, die vermutlich über eine Adduktspezies verläuft. Mit dem gesättigten NHC SIMes wurde ebenfalls keine Adduktbildung beobachtet, auch wenn ein derartiges Intermediat vermutlich durchlaufen wird. Als Produkt der Umsetzung wurde indes ein bicyclisches Molekül identifiziert, welches durch doppelte Ringerweiterung gebildet wurde. Mit ungesättigten NHCs wurden drei Addukte isoliert, welche jedoch nur metastabil waren und beim Erwärmen in bicyclische Verbindungen umlagerten. Die Umlagerungsprodukte konnten weiterhin durch Koordination eines weiteren Äquivalents IMe an die B–H-Funktionalität erneut zu Addukten umgesetzt werden. Die Bildung der zweier bicyclischer Verbindungen wurde ebenfalls mit quantenchemischen Methoden untersucht, wobei ein vierstufiger Prozess durchlaufen wird. Nach der Bildung des NHC-Addukts erfolgt die Übertragung eines Hydrids auf das Carbenkohlenstoffatom. Durch Insertion eines Boratoms in die NC-Bindung des Carbenrings wird eine Spiroverbindung gebildet und im letzten Schritt folgt die Spaltung der BB-Bindung durch Insertion des ehemaligen Carbenkohlenstoffatoms, was zur Bildung der Bicyclen führt. N2 - In the present work the synthesis, functionalization and reactivity of 1,4,2,3-diazadiborinines was investigated. Initially, bis(dimethylamino)-substituted diazadiborinines with different residues on the nitrogen atoms were to be synthesized, whose further functionalization was later in focus. The synthesis was performed by reduction of 1,4-diazabutadienes with elemental lithium and subsequent salt elimination reaction with B2(NMe2)2Cl2. Thus, the monocyclic four N,N'-diaryl-substituted diazadiborinines and one alkyl-substituted diazadiborinine could be prepared. By established methods of diborane(4) chemistry, these were converted into their halogen derivatives (Cl, Br, I). From these, three 2,3-diazido-1,4,2,3-diazadiborinines could be prepared by reaction with TMSN3 from the dihalogen derivatives. These represent the first isolated diborane(4)azide compounds. The synthesis of a bicyclic naphthalene isoster was also successful, which could again be successfully converted into its halogen derivatives as well as the diazdido derivative. An insight into the mechanism of 1,4,2,3-diazadiborinine formation was gained by isolating a diazadiboretidine intermediate, which is formed by double salt elimination. However, this proved to be metastable and rearranged to the six-membered ring of diazadiborinine. Quantum chemical calculations supported the experimental findings. Via commutation reactions, a large number of B,B'-unsymmetrically substituted diazadiborinines could be represented and isolated. Depending on the starting materials used, either equilibrium reactions or quantitative conversions were observed. The reactivity of the novel diazidodiboranes(4) to Lewis bases was also investigated. Both the monocyclic diazadiborinine and the benzodiazadiborinine could be converted with NHC bases to the five different adducts. Under thermal stress a Staudinger-like reaction was observed in the monocyclic adducts, which led to the formation of guanadine-substituted diboranes(4) with the release of N2. However, the benzodiazadiborinine adducts showed a completely different reactivity. Here, a ring reduction reaction took place with formation of diazaborols, which were formed by migration of an azide function to the NHC-stabilized boron atom. In this way, three 1,1-diamino-2,2-diazidodiboranes(5) could be isolated. While no selective reaction was observed during the reaction of the naphthalene derivative with cAAC, the monocyclic diazadiborinine reacted with two equivalents of cAAC. In this case, the first carbon caused a Staudinger-like reaction, which led to the release of dinitrogen to formamidine. The second azide group was coordinated at the $\gamma$ nitrogen atom by another equivalent cAAC. In further reactivity studies the generation of transient iminoboranes from diazidodiazadiborinines was investigated. The diazides showed a highly selective reaction behavior at temperatures above 150 °C and converted to 1,3,2,4-diazadiboretidine with the release of dinitrogen. This was achieved by dimerization of an intermediately formed seven-membered endocyclic iminoborane. The mechanism for the formation of the transient iminoboranes was investigated by quantum chemical methods on the basis of two possible formation pathways. In the last chapter the reactivity of dihydrodiazadiborinine towards NHC and cAAC Lewis bases were investigated. The reaction with cAAC resulted in B-H bond activation by the carbene carbon atom, which is thought to be via an adduct species. No adduct formation was observed with the saturated NHC SIMes either, although such an intermediate is likely to be passed through. However, a bicyclic molecule formed by double ring extension was identified as the product of the reaction. Three adducts were isolated with unsaturated NHCs, but they were only metastable and rearranged into bicyclic compounds upon heating. The rearrangement products were further converted back to adducts by coordinating another equivalent IMe to the B-H functionality. The formation of the two bicyclic compounds was also investigated by quantum chemical methods, whereby a four-step process is used. After formation of the NHC adduct, a hydride is transferred to the carbene carbon atom. By insertion of a boron atom into the NC bond of the carbene ring a spiro compound is formed and in the last step the BB bond is cleaved by insertion of the former carbene carbon atom, which leads to the formation of the bicycles. KW - Heterocyclische Verbindungen KW - Chemie KW - Elementorganik KW - Diazadiborinin Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-214598 ER - TY - JOUR A1 - Thiess, Torsten A1 - Mellerup, Soren K. A1 - Braunschweig, Holger T1 - B–B Cleavage and Ring-Expansion of a 1,4,2,3-Diazadiborinine with N-Heterocyclic Carbenes JF - Chemistry - A European Journal N2 - A 1,4,2,3‐diazadiborinine derivative was found to form Lewis adducts with strong two‐electron donors such as N‐heterocyclic and cyclic (alkyl)(amino)carbenes. Depending on the donor, some of these Lewis pairs are thermally unstable, converting to sole B,N‐embedded products upon gentle heating. The products of these reactions, which have been fully characterized by NMR spectroscopy, elemental analysis, and single‐crystal X‐ray diffraction, were identified as B,N‐heterocycles with fused 1,5,2,4‐diazadiborepine and 1,4,2‐diazaborinine rings. Computational modelling of the reaction mechanism provides insight into the formation of these unique structures, suggesting that a series of B−H, C−N, and B−B bond activation steps are responsible for these “intercalation” reactions between the 1,4,2,3‐diazadiborinine and NHCs. KW - B,N-heterocylcles KW - B-B bond activation KW - diazadiborinines KW - NHCs KW - ring-expansion reactions Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-206173 VL - 25 IS - 59 ER - TY - THES A1 - Schorr, Fabian T1 - Der Einfluss von Alkinyl- und Thienyl-Substituenten auf die Reaktivität von Diboranen(4) T1 - The impact of alkynyl and thienyl functions on the reactivity of diboranes(4) N2 - Im Rahmen der Arbeit werden neue Alkinyl-substituierte Diaryldiborane(4) dargestellt und auf deren Eignung zur Oligomerisierung untersucht. Des Weiteren werden neue 1,2-Dialkinyldiborane(4) synthetisiert und deren Reaktivität beleuchtet. Außerdem werden neue 1,2-Diaryl-1,2-diheteroaryldiborane(4) dargestellt und ebenfalls auf deren Reaktivität hin untersucht. N2 - This work investigates the synthesis of novel alkynyl-functionalised diaryldiboranes(4) and their use in a catenation protocol. Furthermore new 1,2-Dialkynyldiboranes(4) are generated and their behaviour towards different reagents was examined. Also a novel 1,2-Diaryl-1,2-diheteroaryldiborane(4) was prepared and its reactivity was investigated. KW - Diboran KW - Alkin KW - Diborane(4) KW - Alkinyle KW - Thienyl KW - Oligomerisierung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-273668 ER - TY - JOUR A1 - Schulz, Ellina A1 - Mawamba, Viviane A1 - Löhr, Mario A1 - Hagemann, Carsten A1 - Friedrich, Alexandra A1 - Schatzschneider, Ulrich T1 - Structure–activity relations of Pd(II) and Pt(II) thiosemicarbazone complexes on different human glioblastoma cell lines JF - Zeitschrift für Anorganische und Allgemeine Chemie N2 - Ten thiosemicarbazone ligands obtained by condensation of pyridine-2-carbaldehyde, quinoline-2-carbaldehyde, 2-acetylpyridine, 2-acetylquinoline, or corresponding 2-pyridyl ketones with thiosemicarbazides RNHC(S)NHNH\(_{2}\) and R=CH\(_{3}\), C\(_{6}\)H\(_{5}\) were prepared in good yield. The reaction of [PdCl\(_{2}\)(cod)] with cod=1,5-cyclooctadiene or K\(_{2}\)[PtCl\(_{4}\)] resulted in a total of 17 Pd(II) and Pt(II) complexes isolated in excellent purity, as demonstrated by \(^{1}\)H, \(^{13}\)C, and, where applicable, \(^{195\)Pt NMR spectroscopy combined with CHNS analysis. The cytotoxicity of the title compounds was studied on four human glioblastoma cell lines (GaMG, U87, U138, and U343). The most active compound, with a Pd(II) metal centre, a 2-quinolinyl ring, and methyl groups on both the proximal C and distal N atoms exhibited an EC\(_{50}\) value of 2.1 μM on the GaMG cell lines, thus being slightly more active than cisplatin (EC\(_{50}\) 3.4 μM) and significantly more potent than temozolomide (EC\(_{50}\) 67.1 μM). Surprisingly, the EC\(_{50}\) values were inversely correlated with the lipophilicity, as determined with the “shake-flask method”, and decreased with the length of the alkyl substituents (C\(_{1}\)>C\(_{8}\)>C\(_{10}\)). Correlation with the different structural motifs showed that for the most promising anticancer activity, a maximum of two aromatic rings (either quinolinyl or pyridyl plus phenyl) combined with one methyl group are favoured and the Pd(II) complexes are slightly more potent than their Pt(II) analogues. KW - glioblastoma KW - platinum KW - palladium KW - thiosemicarbazone KW - anticancer activity Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-318281 SN - 0044-2313 VL - 648 IS - 12 ER - TY - JOUR A1 - Wu, Zhu A1 - Dinkelbach, Fabian A1 - Kerner, Florian A1 - Friedrich, Alexandra A1 - Ji, Lei A1 - Stepanenko, Vladimir A1 - Würthner, Frank A1 - Marian, Christel M. A1 - Marder, Todd B. T1 - Aggregation-Induced Dual Phosphorescence from (o-Bromophenyl)-Bis(2,6-Dimethylphenyl)Borane at Room Temperature JF - Chemistry—A European Journal N2 - Designing highly efficient purely organic phosphors at room temperature remains a challenge because of fast non-radiative processes and slow intersystem crossing (ISC) rates. The majority of them emit only single component phosphorescence. Herein, we have prepared 3 isomers (o, m, p-bromophenyl)-bis(2,6-dimethylphenyl)boranes. Among the 3 isomers (o-, m- and p-BrTAB) synthesized, the ortho-one is the only one which shows dual phosphorescence, with a short lifetime of 0.8 ms and a long lifetime of 234 ms in the crystalline state at room temperature. Based on theoretical calculations and crystal structure analysis of o-BrTAB, the short lifetime component is ascribed to the T\(^M_1\) state of the monomer which emits the higher energy phosphorescence. The long-lived, lower energy phosphorescence emission is attributed to the T\(^A_1\) state of an aggregate, with multiple intermolecular interactions existing in crystalline o-BrTAB inhibiting nonradiative decay and stabilizing the triplet states efficiently. KW - AIE KW - luminescence KW - phosphorescence KW - triarylborane KW - triplet Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-318297 VL - 28 IS - 30 ER - TY - JOUR A1 - Wu, Zhu A1 - Roldao, Juan Carlos A1 - Rauch, Florian A1 - Friedrich, Alexandra A1 - Ferger, Matthias A1 - Würthner, Frank A1 - Gierschner, Johannes A1 - Marder, Todd B. T1 - Pure Boric Acid Does Not Show Room-Temperature Phosphorescence (RTP) JF - Angewandte Chemie N2 - Boric acid (BA) has been used as a transparent glass matrix for optical materials for over 100 years. However, recently, apparent room-temperature phosphorescence (RTP) from BA (crystalline and powder states) was reported (Zheng et al., Angew. Chem. Int. Ed. 2021, 60, 9500) when irradiated at 280 nm under ambient conditions. We suspected that RTP from their BA sample was induced by an unidentified impurity. Our experimental results show that pure BA synthesized from B(OMe)\(_{3}\) does not luminesce in the solid state when irradiated at 250–400 nm, while commercial BA indeed (faintly) luminesces. Our theoretical calculations show that neither individual BA molecules nor aggregates would absorb light at >175 nm, and we observe no absorption of solid pure BA experimentally at >200 nm. Therefore, it is not possible for pure BA to be excited at >250 nm even in the solid state. Thus, pure BA does not display RTP, whereas trace impurities can induce RTP. KW - boric acid KW - room-temperature phosphorescence (RTP) KW - optical materials Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-318308 VL - 61 IS - 15 ER - TY - THES A1 - Bischof, Tobias Christian T1 - Synthese und Reaktivität von borfunktionalisierten Dodecaboranen T1 - Synthesis and Reactivity of boron-functionalized dodecaboranes N2 - Im Rahmen der vorliegenden Arbeit wurden vier Verbindungsklassen – Borylene, Borole, 9-Borafluorene und 9-Aluminafluorene – untersucht und neue Vertreter dieser Klassen, substituiert mit einem ortho-Dicarba-closo-dodecaboran, dargestellt und auf ihre Reaktivität hin untersucht. Dabei sollte mit den speziellen chemischen Eigenschaften des Carboranylsubstituenten, wie dem elektronenziehenden und gleichzeitig σ-aromatischen Charakter, eine erhöhte Reaktivität der Zielverbindung erreicht werden. N2 - In the present work, four classes of compounds – borylenes, boroles, 9-borafluorenes and 9-aluminafluorenes – were investigated and new representatives of these classes with an ortho-dicarba-closo-dodecaborane substituent were presented and investigated for their reactivity. The aim was to use the unique properties of the carboranyl substituent, such as its electron-withdrawing and simultaneously σ-aromatic character, to achieve enhanced reactivity of the target compounds. KW - Dodecaborane KW - Borole KW - Borafluorene KW - Aluminafluorene KW - Borylene KW - 1,2-Dicarba-closo-dodecaborane Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-287059 ER - TY - THES A1 - Graf, Dominic T1 - Surface and active site modification of proteins with organometallic markers and inhibitors T1 - Modifikation von Proteinen an der Oberfläche und im aktiven Zentrum durch organometallische Marker und Inhibitoren N2 - After implementing a reliable mass spectrometry based kinetic study the indole conjugation with different organometallic indoles led to questions about the electronical and sterical influences on reactivity. The substitution pattern of the ferrocene functionalized indoles at the six-membered ring determines the electron density on the C3 atom, which reacts with the formed Schiff base. Since the experimental results showed the exact opposite trend, covalent docking studies were performed elucidating the importance of surface interactions. These studies were in harmony with the experimental results and determined lysine 33 as most preferable conjugation site as well as substitution in 6-position as most favourable pattern. The amine motif in compounds 6, 7 and 8 proofed to be easily fragmented by the ESI method used. The amide linker in 10 remains intact but shows a lower conversion. Those two inherent characteristics are however preferable for well-defined and site-specific bioconjugation. The synthesis and evaluation of piano stool complex derivatives with manganese and rhenium metal centre 15, 16, 18 and 22 gave additional guidance by the interpretation of applicable structural motifs. The electron-withdrawing carbonyl groups lead to the hindrance of fulvene formation and thus to no fragmentation as seen with the ferrocene group. The total conversion is low compared to 8, only 22 shows a good enough conversion to mainly monoconjugate of 45% and a possible radio-labelling application as 99mTc analogue. As consequence manganese complexes with a stable facial tricarbonyl unit and a tridentate chelator with 4-, 5- and 6-substituted aminomethylindole conjugated through an amide bond were synthesized and consecutively evaluated. The resulting organometallic indole derivatives 29, 30 and 31 all showed a total conversion around 40% similar to 16, but at the same time a rate constant in the range of 10-4 s-1 like the organic indole. Besides the similar conversion, the rate constants followed the trend of the 6-substituted derivative as fastest and then 5- and 4- substituted derivative with decreasing reactivity. For underlining the usage as technetium label for the best out of the series 31, a rhenium analogue was prepared. The resulting compound 32 was especially interesting, because the conversion was even higher than the 70% of 8 with a total of 88%. Additionally, the rate constant was a tenfold higher as well. This rendered compound 32 as best possible 99mTc analogue for further application as radio-label. After the success of 32 and realizing the sterical benefits resulting from the flexible tridentate ligand-system, substitution at the five-membered ring was explored. The complexes 33, 34 and 35 are based on indole-2-carboxylic acid and with the difference of the length of the alkyl spacer between amide and complex to probe for the influence and sterical hindrance, but all three derivatives showed no conjugation which excludes functionalization in 2-position. As the C3 is used for the actual bioconjugation, the last possible derivatization was realized on the indole-N1 by using 1-(3-bromopropyl)indole as building block during the synthesis of the ligand-system. The corresponding manganese 36 and rhenium 37 complexes both showed similar properties of a moderate conversion like 22 and a rate constant in the range of 10-5 s-1. In conclusion the rhenium complex 32 with the 6-substitution pattern at the tridentate indole-bearing ligand remains the most promising structure. The here developed liquid chromatography coupled mass spectrometry-based assay for the determination of inhibitory activity of drug candidates against the 3CLpro of the sever acute respiratory syndrome coronavirus type 2 was successfully implemented and especially designed to give, due to the available absorption spectra and corresponding mass traces, further insight in the otherwise through fluorescence resonance energy transfer-based assays neglected influences on the inhibition results. Starting with a literature-known quinolone containing covalent inhibitor 42 an N1-methylated derivative 43 and their analogues 44 and 45 in which the benzoic acid was exchanged for ferrocene carboxylic acid were synthesized. The inhibition of 3CLpro was evaluated by the concentration of initial 15mer peptide left after incubation and for that purpose the for 280 nm defined molar attenuation coefficient of (26.41±0.59) L*mol-1*cm-1 determined and used. The results showed a reaction of DL dithiothreitol with the less stable benzoic acid esters leading to a moderate inhibitory effect. The methylation in N1-position showed an increase in stability. The methylated and with ferrocene carboxylic acid functionalized derivative showed a complete inhibition during the timeframe of the assay. In search of a fluorescent and therefore traceable inhibitor, 4 hydroxycoumarin was used to synthesize the analogue with benzoic acid 49 and ferrocene carboxylic acid 50. Both derivatives were less stable than their analogues but exhibited the same trend of a more stable ferrocene-derived compound, which exerted a higher inhibition as well. After preparing and testing the model thioester 53 and showing an inactivation of the established inhibitor ebselen, it was concluded that the reaction with DL dithiothreitol reduces the concentration of active intact inhibitor and therefore decreases the inhibition rate during the assay. The next step was proofing the reducing agent as non-essential for the fast assay conducted in a timeframe of 5 min to circumvent the negative influence of DL dithiothreitol. By excluding every inhibition-altering part, the resulting method is the perfect tool for precise statements in relation of inhibitory activity. Then the inhibition assay was repeated for ebselen and the best out of the here introduced organometallic inhibitors 45. Both give equivalent results of a complete inhibition during the measurement. The implemented liquid chromatography coupled mass spectrometry-based assay has many advantages over the fluorescence resonance energy transfer-based assays in which all the information and insight accumulated by the evaluation of uv/vis traces and mass spectra are not available leading to wrong or deviating results regarding the inhibitory capacity of inhibitor candidates. N2 - Nach der erfolgreichen Implementierung einer auf Massenspektrometrie basierenden Methode, um kinetische Studien über die Indolkonjugation durchzuführen, kamen Fragen über die elektronischen und sterischen Einflüsse auf die Reaktivität auf. Das Substitutionsmuster der Ferrocen-funktionalisierten Indole am sechsgliedrigen Ring bestimmt die Elektronendichte am C3-Atom, welches wiederum mit der zuvor entstandenen Schiffbase reagiert. Da die experimentellen Daten einen der Elektronendichte entgegengesetzten Trend aufwiesen, wurden Docking-Studien durchgeführt, um die Einflüsse der Wechselwirkungen mit der Proteinoberfläche näher zu beleuchten. Diese entsprachen den experimentellen Werten und zeigten, dass Lysin 33 die bevorzugte Konjugationsstelle ist und dass die Substitution in 6-Position die energetisch günstigste darstellt. Das sekundäre Amin der Verbindungen 6, 7 und 8 wurde unter den ESI-Bedingungen leicht fragmentiert. Die Amid-Bindung von 10 dagegen bleibt intakt und ein langsamerer Umsatz, welcher für einen wohl definierten Umsatz sorgt, wurde beobachtet. Die Synthese und Evaluation der Halbsandwich-Komplexe 15, 16, 18 und 22 gab zusätzlichen Aufschluss über die strukturellen Einflüsse. Die elektronenziehenden Carbonyle behindern die Bildung der Fulvene, welche für die Ferrocen-Derivate beobachtet worden war. Der Gesamtumsatz ist vergleichsweise gering und nur Substanz 22 zeigt eine annehmbare Konversion von 45% an Monokonjugat auf, welches sie wiederum für den Einsatz als 99mTc-Analog qualifiziert. Als direkte Konsequenz wurden Mangankomplexe mit einer stabilen facialen Tricarbonyl-Einheit und einem Indol beinhaltenden tridentaten Liganden synthetisiert. Dies wurde für die 4-, 5- und 6-Substitution durchgeführt um die Komplexe 29, 30 und 31 zu erhalten. Alle drei zeigten eine Konversion von ungefähr 40% und lagen mit einer Ratenkonstante von 10-4 s-1 in dem Bereich des organischen Indols. Die Ratenkonstanten folgten hingegen wiederum dem Trend der begünstigten 6-Position, gefolgt von der 5- und dann 4-Position. Um einen Verglich zu einer analogen Technetium-Verbindung zu ziehen wurde der beste Komplex 31 als Rhenium-Analog 32 hergestellt. Dies wies den bisher höchsten Gesamtumsatz von 88% auf, welches die Konversion von 70% der Verbindung 8 überschritt. Dadurch qualifizierte sich Verbindung 32 als beste Option für eine Umsetzung als Radiomarker. Nach den Erkenntnissen über die begünstigte Sterik der flexiblen tridendaten Liganden wurde versucht den Erfolg auf den Fünfring zu übertragen. Eine auf Indol-2-säure basierende Reihe an Komplexen (33,34,35) mit unterschiedlich langen Alkyl-Ketten zwischen Indol und Metallkomplex sollte Aufschluss über den sterischen Anspruch geben, allerdings war keine Konjugation für alle drei Derivate zu beobachten. Als Konsequenz wurde die 2-Position für weitere Funktionalisierung nicht weiter berücksichtigt. Die letzte verbliebene Stelle war das Indol-amin selbst, welche durch den Einsatz von 1-(3-bromopropyl)indol bei der Ligandensynthese erfolgreich alkyliert wurde. Der resultierende Mangan- 36 und Rhenium-Komplex 37 zeigten eine mit 22 vergleichbare moderate Konversion und um eine Größenordnung kleinere Ratenkonstante. Durch diese Erkenntnisse verblieb der Rhenium-Komplex 32 weiterhin der beste Kandidat für eine Umsetzung als radioaktiver Marker. Der hier beschriebene liquid chromatography coupled mass spectrometry basierte Assay für die Bestimmung der Inhibitions-Wirkung gegenüber der 3CLpro des sever acute respiratory syndrome coronavirus type 2 wurde erfolgreich etabliert. Durch die zusätzlichen Absorptions , sowie Massenspektren wurden weitere Informationen gewonnen, welche in den oft angewendeten Fluoreszenz-Resonanzenergietransfer Assays vernachlässigt werden und zu Verfälschungen der Inhibitionsergebnisse führen. Ausgehend von dem literaturbekannten kovalenten Inhibitor 42 wurde ein N1-methyliertes Derivat 43 hergestellt. Durch den Austausch von Benzoesäure durch Ferrocensäure wurden die Analoge 44 und 45 erhalten. Die Restkonzentration des 15mer Substrats nach der Inkubation wurde als Maß der Inhibition herangezogen. Hierfür wurde der molare Extinktionskoeffizient bei 280 nm mit (26.41±0.59) L*mol-1*cm-1 bestimmt. Die Methylierung führte zu einer erhöhten Stabilität. Der Wirkstoffkandidat 45 zeigte außerdem eine vollständige Inhibition im Rahmen des durchgeführten Assays. 4-Hydroxycoumarin wurde verwendet, um die fluoreszenten Analoga 49 und 50 herzustellen. Beide waren instabiler, wobei das Ferrocen-Derivat wie zuvor eine erhöhte Inhibition aufzeigte. Nach der Synthese und Auswertung des Assays für eine Thioester Modellverbindung 53 und einer nachgewiesenen Inaktivierung des etablierten Inhibitors Ebselen wurden die Nebenreaktionen mit DL-Dithiothreitol als Ursache für einen Konzentrationsabfall der aktiven und intakten Inhibitoren und infolgedessen verringerte Inhibition angenommen. Als nächstes wurde bewiesen, dass der Zusatz eines Reduktionsmittels wie keinen Einfluss auf die Enzymaktivität während des kurzen Assays hat. So wurden alle Einflüsse auf die Inhibitionswirkung ausgeschlossen und der nun makellose Assay für Ebselen und den hier vorgestellten neuartigen organometallischen Inhibitor 45 wiederholt, welche beide eine vollständige Inhibition aufwiesen. KW - Inhibition KW - SARS-CoV-2 KW - Covalent inhibitors KW - Surface modification KW - Indole conjugation KW - LCMS- based kinetic studies Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-287424 ER - TY - THES A1 - Ferger, Matthias T1 - Development of New Methods for Triarylborane Synthesis and Investigation of Triarylborane Chromophores for DNA and RNA Sensing and Singlet Oxygen Sensitization T1 - Entwicklung Neuer Methoden zur Triarylboran Synthese und Untersuchung von Triarylboran Farbstoffen als DNA und RNA Sensoren und Singulett-Sauerstoff Sensibilisatoren N2 - The 1st chapter provides a detailed review of the development of synthetic approaches to triarylboranes from their first report nearly 135 years ago to the present. In the 2nd chapter, a novel and convenient methodology is reported for the one-pot synthesis of sterically-congested triarylboranes, using bench-stable aryltrifluoroborates as the boron source. The new procedure gives access to symmetrically- and unsymmetrically-substituted triarylboranes. The borylated triarylboranes are suggested as building blocks for the design of functional materials. In the 3rd chapter, four luminescent tetracationic bis-triarylborane DNA and RNA sensors that show high binding affinities, in several cases even in the nM range, are investigated. The molecular structures of two of the neutral precursors reveal some structural flexibility for these compounds in the solid state. The compounds were found to be highly emissive even in water and DNA and RNA binding affinities were found to be dependent on linker length and flexibility. Strong SERS responses for three of the four compounds demonstrate the importance of triple bonds for strong Raman activity in molecules of this compound class. In chapter 4, the compound class of water-soluble tetracationic bis-triarylborane chromophores is extended by EDOT-linked compounds and those are compared to their thiophene-containing analogs. Absorption and emission are significantly red-shifted in these compounds, compared to their thiophene-containing analogs and, due to a large Stokes shift, one of the reported compounds exhibits the most bathochromically shifted emission, observable well into the near infrared region, of all tetracationic water-soluble bis-triarylborane chromophores reported to date. Long-lived excited states, completely quenched by oxygen, were observed for the water-stable compounds of this study via transient absorption spectroscopy and a quantum yield for singlet oxygen formation of 0.6 was determined for one of them. N2 - Das erste Kapitel gibt einen detaillierten Überblick über die Entwicklung verschiedener Synthesemöglichkeiten von Triarylboranen seit ihrer erstmaligen Erwähnung vor rund 135 Jahren bis heute. In Kapitel 2 wurde eine neuartige und praktische Methode für die Eintopfsynthese von sterisch stabilisierten Triarylboranen unter Verwendung von luftstabilen Aryltrifluorboraten als Borquelle beschrieben. Das neue Verfahren ermöglicht den Zugang zu symmetrisch und unsymmetrisch substituierten Triarylboranen, die bei der Konstruktion borhaltiger Funktionsmaterialien verwendet werden könnten. Im dritten Kapitel wurden tetrakationische Bis-Triarylborane bezüglich DNA- und RNA-Sensorik untersucht, wobei hohe Bindungsaffinitäten, wurden. Die Molekülstrukturen von zwei neutralen Vorstufenverbindungen deuten auf eine gewisse Flexibilität für diese Verbindungen im Festkörper hin. Die Verbindungen erwiesen sich selbst in Wasser als stark emittierend und die DNA und RNA Bindungsaffinitäten waren abhängig von Länge und Flexibilität des Linkers. Starke SERS-Signale für drei der vier Verbindungen, zeigen die Bedeutung von Dreifachbindungen für eine starke Raman-Aktivität in Molekülen dieser Verbindungsklasse. In Kapitel 4 dieser Arbeit wurde die Verbindungsklasse wasserlöslicher tetrakationischer Bis Triarylboran-Chromophore um EDOT-verbrückte Verbindungen erweitert und diese mit ihren literaturbekannten Thiophenanaloga verglichen. Absorption und Emission sind in diesen Verbindungen im Vergleich zu ihren Thiophen-haltigen Analoga rotverschoben und eine der Verbindungen zeigt die am weitesten rotverschobene, noch weit im nahen Infrarotbereich detektierbare, Emission aller bisher bekannten Verbindungen dieser Art. Für die wasserstabilen Verbindungen wurden mittels transienter Absorptionsspektroskopie langlebige Zustände beobachtet, die vollständig durch Sauerstoff gequencht werden und eine Quantenausbeute für die Singulett-Sauerstoffbildung von 0.6 wurde für eine der Verbindungen bestimmt. KW - Triarylborane KW - Fotophysik KW - Chemische Synthese KW - Singulettsauerstoff KW - DNA-Sensor KW - Photophysics KW - Chemical Synthesis KW - Singlett Oxygen KW - Boron Materials KW - Biomacromolecular Sensing Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234307 ER - TY - THES A1 - Hanft, Anna T1 - Aminotroponiminate: Koordinationschemie, Reaktivität und Redoxverhalten von Alkalimetall-, Silber-, und Bismut-Komplexen T1 - Aminotroponiminates: Coordination Chemistry, Reactivity and Redox Behaviour of Alkali Metal, Silver and Bismut Complexes N2 - Die Koordinationschemie, die Reaktivität und das Redoxverhalten von Alkalimetall-, Silber- und Bismut-Aminotroponiminat(ATI)-Komplexen wurde untersucht N2 - The coordination chemistry, the reactivity and the redox behaviour of alkali metal, silver and bismut aminotroponiminate (ATI) complexes has been investigated KW - Reaktivität KW - Alkalimetall KW - Silber KW - Bismut KW - Komplexe KW - Aminotroponiminate KW - Redoxverhalten KW - Koordinationschemie KW - Koordinationslehre Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-232049 N1 - Teile der Arbeit wurden veröffentlicht in: WILEY-VCH Verlag GmbH & Co. KGaA; The Royal Society of Chemistry; American Chemical Society; Zeitschrift für Kristallographie - New Crystal Structures ER - TY - THES A1 - Kachel, Stephanie T1 - Element-Element-Bindungsaktivierungen und Carben-Boran-Adduktdarstellungen durch vicinale Biscarbenoide T1 - Element-element bond activations and carbene-borane adduct representations by vicinal biscarbenoids N2 - Im Rahmen der vorliegenden Arbeit wurde das vicinale Biscarbenoid Bis(piperidyl)acetylen eingesetzt um neben Bindungsaktivierungen, auch Carben-Addukte darzustellen. Im ersten Abschnitt liegt der Fokus auf der Reaktivität des Acetylens gegenüber 1,3-dipolaren Reagenzien. Dies führte auf Grund der carbenoiden Eigenschaften des Acetylens, neben der Ausbildung heterocyclischer Additionsprodukte, zu Bindungsaktivierungen. Der zweite Abschnitt befasst sich mit der Darstellung von Carben-Boran-Addukten, die anhand ihrer strukturellen und spektroskopischen Parameter miteinander verglichen und eingehend untersucht wurden. In dieser Arbeit wird die Reaktivität des Bis(piperidyl)acetylens auf Nebengruppen-Metallkomplexe erweitert. N2 - The vicinal biscarbenoid bis(piperidyl)acetylene was used to prepare carbene adducts in addition to bond activations. In the first section, the focus is on the reactivity of acetylene towards 1,3-dipolar reagents. This led to bond activations due to the carbenoid properties of acetylene and to the formation of heterocyclic addition products. The second section deals with the preparation of carbene-borane adducts, which were compared and studied in detail based on their structural and spectroscopic parameters. In this work, the reactivity of bis(piperidyl)acetylene is extended to side-group metal complexes. KW - Carbenoide KW - Bindungsaktivierungen KW - Bindungsaktivierung KW - Biscarbenoide KW - Carben-Boran-Addukte Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-253291 ER -