• search hit 2 of 3
Back to Result List

Raman-Spektroskopie hybridpolymerer Sol-Gel-Materialien : vom Sol bis zur Schicht

Raman spectroscopy of hybrid polymeric sol-gel materials: from the sol to the coating

Please always quote using this URN: urn:nbn:de:bvb:20-opus-14994
  • In der vorliegenden Arbeit wurden durch den Sol-Gel-Prozeß hergestellte hybride Sole, Xerogele und Schichten mit Hilfe der Raman-Spektroskopie untersucht. Dazu wurden zunächst die schwingungsspektroskopischen Zuordnungen für verschiedene Alkoxysilanen ergänzt und zusammengefasst. Anschließend wurde die Hydrolyse vom Vinyltriethoxysilan (VTES) durch FT-Raman-Spektroskopie vom Sol bis zum Xerogel verfolgt. Weitere Untersuchungen an verschiedenen Xerogelen lieferten neue Erkenntnisse über charakteristische Raman-Banden des anorganischenIn der vorliegenden Arbeit wurden durch den Sol-Gel-Prozeß hergestellte hybride Sole, Xerogele und Schichten mit Hilfe der Raman-Spektroskopie untersucht. Dazu wurden zunächst die schwingungsspektroskopischen Zuordnungen für verschiedene Alkoxysilanen ergänzt und zusammengefasst. Anschließend wurde die Hydrolyse vom Vinyltriethoxysilan (VTES) durch FT-Raman-Spektroskopie vom Sol bis zum Xerogel verfolgt. Weitere Untersuchungen an verschiedenen Xerogelen lieferten neue Erkenntnisse über charakteristische Raman-Banden des anorganischen Netzwerkes. Der zweite Teil dieser Arbeit richtete sich auf konfokale Raman-mikrospektroskopische Untersuchungen hybrider Schichten bezüglich der anorganischen und organischen Vernetzung. Zunächst wurden Polymersubstrate untersucht. Es wurde experimentell festgestellt, dass die axiale Auflösung eines konfokalen Raman-Mikrospektrometers tatsächlich niedriger ist als bisher in der Literatur angenommen wurde. Bei Mikro-Raman-Untersuchungen an verschiedenen Schichtsystemen hat sich herausgestellt, dass die Schwingungsmoden des anorganischen Netzwerks im niederfrequenten Raman-Bereich leicht detektierbar sind. Die Lage der charakteristischen sogenannten T3/Q3-Bande im Raman-Spektrum der UV-gehärteten Probe deutet allerdings auf einen niedrigeren Kondensationsgrad hin, als beim langsam luftgetrockneten Xerogel, was mit Hilfe von 29Si-Festkörper-NMR-Messungen bestätigt wurde. Darüber hinaus konnte festgestellt werden, dass die Schichten einen höheren Kondensationsgrad als die gleich behandelten Volumenproben aufweisen. Es wurde gezeigt, dass die gewonnenen Raman-spektroskopischen Erkenntnisse für die Erforschung und die Lösung von Vernetzungsproblemen hilfreich sein können. Nach einem kurzen Überblick der Mechanismen der organischen Vernetzung wurden zunächst thermisch-hartbaren Schichtsysteme auf Glycidyloxypropyltrimethoxysilan-Basis durch Raman-Mikrospektroskopie untersucht. Die quantitative Auswertung des Umsetzungsgrades erfolgte nach einer Bandenanalyse der Ringatmungsschwingung des Epoxidrings. Es stellte sich heraus, dass die Polyadditionsreaktion nur sehr begrenzt stattfindet. Dagegen ist die Anhydridhärtung unter den gleichen Bedingungen deutlich effizienter. Daneben wurde gezeigt, dass die an Volumenproben erhaltenen Ergebnisse, in Bezug auf die organische Vernetzung, nicht auf die entsprechenden Schichten übertragen werden können. Bei den untersuchten UV-härtbaren Schichtsystemen konnte der Umsetzungsgrad mittels einer Bandenanalyse der reaktiven Gruppen erfolgreich ermittelt werden. Die Reaktivität der ungesättigten Gruppen, wenn sie einer radikalischen Polymerisation ausgesetzt sind, folgt der Reihe: Allyl < Vinyl < Acrylat. Die Thiol-En-Addition bei den VTES / Mercaptopropyltrimethoxysilan-Schichtsystemen führt zu höheren Umsetzungsgraden der Vinylgruppen bei gleichen Bedingungen. Die Kinetik der Polymerisationsreaktion spielt also eine entscheidende Rolle bei der Vollständigkeit der organischen Vernetzung. Ein weiterer Teil dieser Arbeit richtete sich auf die Ermittlung der mechanischen Eigenschaften von hybriden Schichten und deren Korrelation mit spektroskopischen Daten. In allen untersuchten Schichtsysteme demonstrierte die chemische Variation der beteiligten Komponenten, dass die organische Vernetzung und das anorganische Netzwerk stark miteinander wechselwirken. Somit ensteht ein Synergieeffekt, welcher der hybridpolymeren Schicht ihre mechanische Beständigkeit verleiht. Schließlich stellte sich heraus, dass die Mikrohärte mit den spektroskopischen Daten verknüpft werden kann. Bei allen Schichtsystemen zeigte sich eine starke Abhängigkeit von Mikrohärte und Härtungsdauer. Alle thermisch gehärteten Schichten weisen eine sehr hohe Abriebfestigkeit sowie eine sehr gute Adhäsion auf Glas und Kunststoff auf, was ihren Einsatz als kratzfeste Schichten nahelegt. Die UV-härtbaren Schichtsysteme weisen zwar eine hohe Abriebfestigkeit auf, haften aber schlecht auf Polycarbonaten (PC). Die haftungs- / enthaftungsrelevanten Vorgänge spielen sich an der Grenzflächen oder einer Interphase geringer Ausdehnung statt und können daher Raman-miskrospektroskopisch nicht erfasst werden. TEM-Aufnahmen zeigten deutlich, dass die schlechte Haftung auf PC auf die unzureichende Benetzung der Schicht auf dem Substrat zurückzuführen ist. Weiterhin konnte festgestellt werden, dass der Zusatz von einem Acrylat als Additiv zur Bildung einer Interdiffusionsschicht führt, die die Haftung auf PC verbessert. Die Untersuchungen der Bewitterungsbeständigkeit beschränkten sich auf zwei UV-härtbare Schichtsysteme. Die Mikro-Raman-Spektren zeigten, dass zunächst die organischen Komponenten der hybriden Schicht angegriffen und geschädigt werden. Der Schutzeffekt von Lichtstabilisatoren und UV-Absorbern auf die organischen Komponenten des hybriden Netzwerks konnte ebenfalls spektroskopisch bestätigt werden.show moreshow less
  • The present work deals with the Raman spectroscopic study of hybrid coating formulations prepared by the sol-gel process. First vibrational spectroscopic assignments for several alkoxysilanes were completed and presented. The hydrolysis of vinyltriethoxysilane (VTES) was followed from the sol to the xerogel state by means of FT-Raman spectroscopy. New insights about characteristic Raman bands of the inorganic network were gained from further investigations. The second part of this work deals with the confocal Raman microscopic study of theThe present work deals with the Raman spectroscopic study of hybrid coating formulations prepared by the sol-gel process. First vibrational spectroscopic assignments for several alkoxysilanes were completed and presented. The hydrolysis of vinyltriethoxysilane (VTES) was followed from the sol to the xerogel state by means of FT-Raman spectroscopy. New insights about characteristic Raman bands of the inorganic network were gained from further investigations. The second part of this work deals with the confocal Raman microscopic study of the inorganic condensation and organic cross-linking of hybrid coatings. For this purpose several polymeric substrates were studied. It was experimentally demonstrated that the axial resolution of the confocal Raman microspectrometer is actually lower than usually claimed in the literature. The confocal Raman microscopic study of different coating systems showed that the vibrational modes of the inorganic network may be easily detected in the low wavenumber region. The position of the characteristic so-called T3/Q3 band for the UV-cured samples indicates a lower inorganic condensation as compared to the air-dried xerogel. This was confirmed by means of the corresponding 29Si solid state NMR spectra. Besides, it was shown that the degree of condensation is higher in the coatings as in the bulk samples. The Raman microscopic measurements may help to investigate and solve the condensation problems during development of coating sols. After a reminder of the mechanisms involved in the organic cross-linking of epoxy-based systems, the thermally cured coating system containing Glycidyloxypropyltrimethoxysilane (GPTMS) was first studied. The analysis of the characteristic ring-breathing mode of the epoxy groups was used to calculate the conversion of the epoxy groups. The conversion of the epoxy groups through a thermal polyaddition was found to be very low. In contrast to that, the thermal curing in the presence of an anhydride was much more efficient under the same conditions. Furthermore it must be pointed out that the state of condensation and organic cross-linking in thin coatings must not be derived from the spectral results obtained for the corresponding bulk samples. The conversion of the unsaturated groups may be calculated for all UV-curable coating systems with the help of their corresponding Raman bands. The reactivity of the unsaturated groups towards radical polymerisation was found to follow the series: allyl < vinyl < acrylate. In comparison, the thiol / ene addition (VTES / Mercaptopropyltrimethoxysilane coatings) leads to a higher conversion degree of the vinyl groups under the same curing conditions. This result shows that the kinetics of the polymerisation reaction employed has a decisive influence on the completeness of the organic cross-linking. A further part of this work aimed at the investigation of the mechanical properties of the hybrid films. It was proceeded with some variation of the chemical formulation, which finally revealed a strong coupling effect existing between organic cross-linking and inorganic network. This synergic effect is undoubtedly responsible for the mechanical resistance of the hybrid coatings. Finally, it was found that the micro-hardness may be correlated with the Raman spectroscopic data, the quantitative estimation of the organic cross-linking degree beeing a function of the curing conditions and chemistry for any studied hybrid coating system. A strong dependence between the micro-hardness and the curing time was noted. All the thermally curable coatings were highly resistant against abrasion and generally possess very good adhesion properties on glass and plastic, so that they have a great potential for scratch-resistant coating applications. UV-curable coating systems, while having a good abrasion resistance as well, showed poor adhesion on polycarbonate (PC). Adhesion relevant processes occur at the interface or in a region of small dimension, thus are not accessible through Raman microspectroscopy. The TEM micrographs showed that the lack of adhesion on polycarbonate was essentially due to the poor wettability of the coating sol on the polycarbonate substrate. The TEM micrographs of coating systems containing an acrylated additive showed the presence of an interpenetrating layer that is considered to be responsible for the good adhesion on polycarbonate. The investigations on the weathering stability of the hybrid coatings were restricted to two UV-curable coating systems. The micro-Raman spectra showed that mainly the organic cross-links would be affected and damaged through the accelerated weathering. The addition of light stabilizers and UV-absorbers clearly lead to a protection of the organic cross-links of the hybrid coatings as shown spectroscopically.show moreshow less

Download full text files

Export metadata

Additional Services

Share in Twitter Search Google Scholar Statistics
Metadaten
Author: Karine Gigant
URN:urn:nbn:de:bvb:20-opus-14994
Document Type:Doctoral Thesis
Granting Institution:Universität Würzburg, Fakultät für Chemie und Pharmazie
Faculties:Fakultät für Chemie und Pharmazie / Lehrstuhl für Silicatchemie
Date of final exam:2005/09/14
Language:German
Year of Completion:2005
Dewey Decimal Classification:5 Naturwissenschaften und Mathematik / 54 Chemie / 540 Chemie und zugeordnete Wissenschaften
GND Keyword:Sol-Gel-Verfahren; Raman-Spektroskopie
Tag:Alkoxysilane; Raman-Spektroskopie; Sol-Gel; funktionelle Schichten; konfokale Raman-Mikroskopie
Raman spectroscopy; alkoxysilanes; confocal Raman microscopy; functional coatings; sol-gel
Release Date:2005/10/10
Advisor:Prof. Dr. Gerd Müller