• search hit 5 of 6
Back to Result List

Anisotropies in (Ga,Mn)As - Measurement, Control and Application in Novel Devices

Anisotropien in (Ga,Mn)As - Messung, Kontrolle und Anwendung in neuartigen Bauelementen

Please always quote using this URN: urn:nbn:de:bvb:20-opus-23370
  • Ferromagnetic semiconductors (FS) promise the integration of magnetic memory functionalities and semiconductor information processing into the same material system. The prototypical FS (Ga,Mn)As has become the focus of semiconductor spintronics research over the past years. The spin-orbit mediated coupling of magnetic and semiconductor properties in this material gives rise to many novel transport-related phenomena which can be harnessed for device applications. In this thesis we address challenges faced in the development of anFerromagnetic semiconductors (FS) promise the integration of magnetic memory functionalities and semiconductor information processing into the same material system. The prototypical FS (Ga,Mn)As has become the focus of semiconductor spintronics research over the past years. The spin-orbit mediated coupling of magnetic and semiconductor properties in this material gives rise to many novel transport-related phenomena which can be harnessed for device applications. In this thesis we address challenges faced in the development of an all-semiconductor memory architecture. A starting point for information storage in FS is the knowledge of their detailed magnetic anisotropy. The first part of this thesis concentrates on the investigation of the magnetization behaviour in compressively strained (Ga,Mn)As by electrical means. The angle between current and magnetization is monitored in magnetoresistance(MR) measurements along many in-plane directions using the Anisotropic MR(AMR) or Planar Hall effect(PHE). It is shown, that a full angular set of such measurements displayed in a color coded resistance polar plot can be used to identify and quantitatively determine the symmetry components of the magnetic anisotropy of (Ga,Mn)As at 4 K. We compile such "anisotropy fingerprints" for many (Ga,Mn)As layers from Wuerzburg and other laboratories and find the presence of three symmetry terms in all layers. The biaxial anisotropy term with easy axes along the [100] and [010] crystal direction dominates the magnetic behaviour. An additional uniaxial term with an anisotropy constant of ~10% of the biaxial one has its easy axis along either of the two <110> directions. A second contribution of uniaxial symmetry with easy axis along one of the biaxial easy axes has a strength of only ~1% of the biaxial anisotropy and is therefore barely visible in standard SQUID measurements. An all-electrical writing scheme would be desirable for commercialization. We report on a current assisted magnetization manipulation experiment in a lateral (Ga,Mn)As nanodevice at 4 K (far below Tc). Reading out the large resistance signal from DW that are confined in nanoconstrictions, we demonstrate the current assisted magnetization switching of a small central island through a hole mediated spin transfer from the adjacent leads. One possible non-perturbative read-out scheme for FS memory devices could be the recently discovered Tunneling Anisotropic MagnetoResistance (TAMR) effect. Here we clarify the origin of the large amplification of the TAMR amplitude in a device with an epitaxial GaAs tunnel barrier at low temperatures. We prove with the help of density of states spectroscopy that a thin (Ga,Mn)As injector layer undergoes a metal insulator transition upon a change of the magnetization direction in the layer plane. The two states can be distinguished by their typical power law behaviour in the measured conductance vs voltage tunneling spectra. While all hereto demonstrated (Ga,Mn)As devices inherited their anisotropic magnetic properties from their parent FS layer, more sophisticated FS architectures will require locally defined FS elements of different magnetic anisotropy on the same wafer. We show that shape anisotropy is not applicable in FS because of their low volume magnetization. We present a method to lithographically engineer the magnetic anisotropy of (Ga,Mn)As by submicron patterning. Anisotropic strain relaxation in submicron bar structures (nanobars) and the related deformation of the crystal lattice introduce a new uniaxial anisotropy term in the energy equation. We demonstrate by both SQUID and transport investigations that this lithographically induced uniaxial anisotropy overwrites the intrinsic biaxial anisotropy at all temperatures up to Tc. The final section of the thesis combines all the above into a novel device scheme. We use anisotropy engineering to fabricate two orthogonal, magnetically uniaxial, nanobars which are electrically connected through a constriction. We find that the constriction resistance depends on the relative orientation of the nanobar magnetizations, which can be written by an in-plane magnetic field. This effect can be explained with the AMR effect in connection with the field line patterns in the respective states. The device offers a novel non-volatile information storage scheme and a corresponding non-perturbative read-out method. The read out signal is shown to increase drastically in samples with partly depleted constriction region. This could be shown to originate in a magnetization direction driven metal insulator transition of the material in the constriction region.show moreshow less
  • Ferromagnetische Halbleiter (FS) versprechen die Integration von magnetischen Eigenschaften für Speicheranwendungen und halbleitenden Eigenschaften zur Informationsverarbeitung innerhalb des selben Materialsystems. (Ga,Mn)As ist als Modellsystem in den letzten Jahren in den Fokus der Halbleiterspintronik gerückt. Die Kopplung der magnetischen und elektrischen Eigenschaften über die Spin-Bahn-Wechselwirkung ist die Ursache vieler neuer Transportphänomene. Sie sind Grundlage neuartiger Anwendungen und Bauteildesigns. In dieser Arbeit beschäftigenFerromagnetische Halbleiter (FS) versprechen die Integration von magnetischen Eigenschaften für Speicheranwendungen und halbleitenden Eigenschaften zur Informationsverarbeitung innerhalb des selben Materialsystems. (Ga,Mn)As ist als Modellsystem in den letzten Jahren in den Fokus der Halbleiterspintronik gerückt. Die Kopplung der magnetischen und elektrischen Eigenschaften über die Spin-Bahn-Wechselwirkung ist die Ursache vieler neuer Transportphänomene. Sie sind Grundlage neuartiger Anwendungen und Bauteildesigns. In dieser Arbeit beschäftigen wir uns mit den Herausforderungen, die die Entwicklung einer halbleitenden Speicherarchitektur mit sich bringt. Die Kenntnis der magnetischen Anisotropie ist die Grundlage für die magnetische Informationsspeicherung. Der erste Teil der Arbeit beschäftigt sich deshalb mit der Untersuchung des Verhaltens der Magnetisierung in kompressiv verspannten (Ga,Mn)As Schichten durch elektrische Messungen. Bei Magnetfeld-Scans entlang vieler Richtungen in der Schichtebene wird der von Strom und Magnetisierung eingeschlossene Winkel mittels des Anisotropen Magnetowiderstandseffektes(AMR) oder des Planaren Hall Effektes(PHE) beobachtet. Eine winkelabhängige Reihe solcher Messungen, dargestellt in einem farbkodierten Widerstandspolardiagramm, wird zur Identifizierung und quantitativen Bestimmung der Symmetriekomponenten der magnetischen Anisotropie bei 4 K verwendet. Solche „Anisotropiefingerabdrücke" von vielen (Ga,Mn)As Schichten aus Würzburg und anderen Laboratorien bestätigen das Vorhandensein von drei Anisotropiekomponenten bei 4 K. Der vierzählige Anteil mit weichen Achsen entlang der [100] und [010] Kristallrichtung dominiert die magnetischen Eigenschaften. Ein weiterer Anteil, mit zweizähliger Symmetrie, typische Anisotropiekonstante ~10% der vierzähligen, hat seine weiche Achse entlang einer <110> Richtungen. Eine zweite zweizählige Komponente mit weicher Achse entlang [100] oder [010] wird wegen seiner kleinen Anisotropiekonstante (1% der vierzähligen) in SQUID Messungen oft übersehen. Elektrisches Schreiben wäre für kommerzielle Anwendungen interessant. Wir demonstrieren strominduziertes Magnetisierungsschalten in einer lateralen (Ga,Mn)As Struktur bei 4 K. Wir lesen den großen Widerstand aus, der durch das geometrische Confinement von Domänenwänden in Verengungen entsteht. Das stromunterstützte Umschalten der Magnetisierung einer kleinen Insel durch ladungsträger-übermittelten Spin-Transfer von den größeren Zuleitungen kann nachgewiesen werden. Eine Moeglichkeit zur nichtzerstörenden Messung des Magnetisierungszustandes eines Halbleiterspeicherelementes ist die Nutzung des Anisotropen Tunnelmagnetowiderstandseffekts (TAMR). Hier wird der Ursprung der großen Verstärkung des Effektes in einer Struktur mit epitaktisch gewachsenener Tunnelbarriere bei niedrigen Temperaturen untersucht und erklärt. Es wird gezeigt, dass eine dünne (Ga,Mn)As Injektorschicht vom metallischen in den isolierenden Zustand übergeht, wenn die Magnetisierungsrichtung in der Schichtebene gedreht wird. Zustände auf der metallischen Seite des MIT können leicht von Zuständen auf der isolierenden Seite am Anstieg der Tunnelleitfähigkeitskennlinie unterschieden werden. Um den Anforderungen von komplexeren Architekturen und Designs gerecht zu werden, wird hier eine Methode eingeführt, um erstmals die magnetische Anisotropie in (Ga,Mn)As lokal zu kontrollieren. Typische (Ga,Mn)As Strukturen habe eine vernachlässigbar kleine Formanisotropie. Die neuartige Methode zur lokalen Einstellung der magnetischen Anisotropie, beruht auf der Mikrostrukturierung und der damit verbundenen anisotropen Relaxation des Kristallgitters. SQUID- und Transportmessungen demonstrieren die uniaxiale magnetische Anisotropie der lithographisch definierten Submikrometer-Streifen (Nanobars), die im gesamten Temperaturbereich von 4 K bis zu Tc die magnetischen Eigenschaften der Strukturen bestimmt. Im letzten Teil der Arbeit nutzen wir die Anisotropiekontrolle zum Design eines nicht-flüchtigen ferromagnetischen Halbleiter-Speicherelementes. Zwei senkrecht zueinander angeordnete, magnetisch uniaxiale Nanobars sind an einer Ecke über eine Verengung elektrisch verbunden. Die relative Orientierung ihrer Magnetisierungsvektoren wird durch ein Magnetfeld eingestellt. Der geschriebene Magnetisierungszustand bleibt bei ausgeschaltetem Feld erhalten und ist durch die Messung des elektrischen Widerstandes der Verengung auslesbar. Feldlinienbilder der verschiedenen magnetischen Zustände in Kombination mit dem AMR Effekt können dieses Verhalten erklären. Das Auslesesignal, also der Widerstandsunterschied zwischen den Zuständen, kann bedeutend verstärkt werden, indem eine Struktur mit teilweise verarmter Verengung verwendet wird. Wie in der TAMR Struktur, ist die Verstärkung auf einen Metall-Isolator-Uebergang beim Drehen der Magnetisierung zurückzuführen.show moreshow less

Download full text files

Export metadata

Additional Services

Share in Twitter Search Google Scholar Statistics
Metadaten
Author: Katrin Pappert
URN:urn:nbn:de:bvb:20-opus-23370
Document Type:Doctoral Thesis
Granting Institution:Universität Würzburg, Fakultät für Physik und Astronomie
Faculties:Fakultät für Physik und Astronomie / Physikalisches Institut
Date of final exam:2007/07/03
Language:English
Year of Completion:2007
Dewey Decimal Classification:5 Naturwissenschaften und Mathematik / 53 Physik / 530 Physik
GND Keyword:Anisotropie; Magnetoelektronik; Ferromagnetikum; Halbleiter
Tag:"(Ga; Anisotropie; Bauelemente; Datenspeicher; Mn)As"; Spintronik
"(Ga; Anisotropy; Mn)As"; Spintronics; devices; memory
PACS-Classification:70.00.00 CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES / 75.00.00 Magnetic properties and materials (for magnetic properties of quantum solids, see 67.80.dk; for magnetic properties related to treatment conditions, see 81.40.Rs; for magnetic properties of superconductors, see 74.25.Ha; for magnetic properties of rocks a / 75.30.-m Intrinsic properties of magnetically ordered materials (for critical point effects, see 75.40.-s) / 75.30.Gw Magnetic anisotropy
70.00.00 CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES / 75.00.00 Magnetic properties and materials (for magnetic properties of quantum solids, see 67.80.dk; for magnetic properties related to treatment conditions, see 81.40.Rs; for magnetic properties of superconductors, see 74.25.Ha; for magnetic properties of rocks a / 75.47.-m Magnetotransport phenomena; materials for magnetotransport (for spintronics, see 85.75.-d; see also 72.15.Gd, 73.50.Jt, 73.43.Qt, and 72.25.-b in transport phenomena)
70.00.00 CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES / 75.00.00 Magnetic properties and materials (for magnetic properties of quantum solids, see 67.80.dk; for magnetic properties related to treatment conditions, see 81.40.Rs; for magnetic properties of superconductors, see 74.25.Ha; for magnetic properties of rocks a / 75.50.-y Studies of specific magnetic materials / 75.50.Pp Magnetic semiconductors
70.00.00 CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES / 75.00.00 Magnetic properties and materials (for magnetic properties of quantum solids, see 67.80.dk; for magnetic properties related to treatment conditions, see 81.40.Rs; for magnetic properties of superconductors, see 74.25.Ha; for magnetic properties of rocks a / 75.75.+a Magnetic properties of nanostructures
80.00.00 INTERDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY / 85.00.00 Electronic and magnetic devices; microelectronics; Vacuum tubes, see 84.47.+w; Microwave tubes, see 84.40.Fe; Phototubes, see 85.60.Ha; Conductors, resistors, and inductors, see 84.32.Ff, Hh / 85.75.-d Magnetoelectronics; spintronics: devices exploiting spin polarized transport or integrated magnetic fields
Release Date:2007/07/13
Advisor:Prof. Laurens W. Molenkamp