Filtern
Volltext vorhanden
- ja (5)
Gehört zur Bibliographie
- ja (5)
Dokumenttyp
Schlagworte
- super-resolution (5) (entfernen)
Institut
- Theodor-Boveri-Institut für Biowissenschaften (5) (entfernen)
This thesis reviews the fundamentals of three-dimensional super-resolution localization imaging. In order to infer the axial coordinate of the emission of single fluorophores, the point spread function is engineered following a technique usually referred to as astigmatic imaging by the introduction of a cylindrical lens to the detection path of a microscope.
After giving a short introduction to optics and localization microscopy, I outline sources of aberrations as frequently encountered in 3D-localization microscopy and will discuss their respective impact on the precision and accuracy of the localization process. With the knowledge from these considerations, experiments were designed and conducted to verify the validity of the conclusions and to demonstrate the abilities of the proposed microscope to resolve biological structures in the three spatial dimensions. Additionally, it is demonstrated that measurements of huge volumes with virtually no aberrations is in principle feasible.
During the course of this thesis, a new method was introduced for inferring axial coordinates. This interpolation method based on cubic B-splines shows superior performance in the calibration of a microscope and the evaluation of subsequent measurement and will therefore be used and explained in this work.
Finally, this work is also meant to give future students some guidance for entering the field of 3D localization microscopy and therefore, detailed protocols are provided covering the specific aspects of two color 3D localization imaging.
Die Lokalisationsmikroskopie ist eine neue, vielversprechende Methode der hochauflösenden Fluoreszenzmikroskopie. Sie ermöglicht detaillierte Einblicke in die Organisation und den strukturellen Aufbau von Zellen. Da die Vorbereitung der Proben und das Aufnehmen der Bilder im Vergleich zu herkömmlichen Methoden höhere Anforderungen stellt, mussten ihr Potential und ihre Zuverlässigkeit erst noch überzeugend gezeigt werden. Bis vor kurzem wurde das Auflösungsvermögen vor allem an Mikrotubuli gezeigt, deren filamentöse Struktur allerdings schon in konfokalen Bildern zu erkennen ist. Deswegen wurde in dieser Dissertation der Kernporenkomplex (NPC), dessen Struktur in der konventionellen Fluoreszenzmikroskopie nicht auflösbar ist, als Modellstruktur für die hochauflösende Fluoreszenzmikroskopie eingeführt.
Dazu wurden Kernporenkomplexe aus Kernhüllen von Xenopus laevis Oocyten mit dSTORM (direct stochastic optical reconstruction microscopy), einer Methode der Lokalisationsmikroskopie, hochaufgelöst. Damit konnte nun erstmals die Achtfachsymmetrie dieses Proteinkomplexes lichtmikroskopisch dargestellt werden. Desweiteren konnte der Zentralkanal mit einem Durchmesser von ca. 40 nm aufgelöst werden. Die Daten eigneten sich außerdem für eine automatisierte Bildanalyse nach dem sogenannten "particle averaging" - einer aus der Elektronenmikroskopie bekannten Methode, um eine Durchschnittsstruktur zu ermitteln.
Darüber hinaus wurden Zweifach-Färbungen von NPCs benutzt, um verschiedene Ansätze für Zweifarben-Aufnahmen mit dSTORM zu testen. Neben dem mittlerweile standardmäßig benutzten, sequentiellen Ansatz mit zwei spektral getrennten Farbstoffen, wurde auch ein simultaner Ansatz mit zwei spektral überlappenden Farbstoffen erfolgreich angewandt. Auch für 3D-Messungen mit den Ansätzen Biplane und Astigmatismus eignete sich die Markierung der Kernhülle. Hier wurden jedoch A6-Zellen benutzt und die Krümmung des Zellkerns über die gefärbten Kernporen dargestellt.
dSTORM-Messungen können nicht nur an fixierten, sondern auch in lebenden Zellen durchgeführt werden. Hierzu eignen sich vor allem sehr immobile Proteine, wie H2B oder Lamin C. Anhand von SNAP-Tag- und Halo-Tag-Konstrukten konnte gezeigt werden, dass sich kommerziell erhältliche, organische Farbstoffe auch in endogener zellulärer Umgebung schalten lassen, wodurch Lebendzell-Aufnahmen mit dSTORM möglich sind.
Ein weiterer Teil dieser Arbeit befasst sich mit korrelativen Aufnahmen aus dSTORM und Rasterelektronenmikroskopie (SEM). Hierzu wurden Xenopus laevis Kernhüllen zuerst mit dSTORM hochaufgelöst und danach für die EM präpariert. Anschließend wurden zugehörige Bereiche am Rasterelektronenmikroskop aufgenommen. Mit den erhaltenen korrelativen Bildern konnte gezeigt werden, dass sich dSTORM und SEM bei geeigneten Proben durchaus kombinieren lassen. Proteine können somit spezifisch markiert und im Rahmen ihrer strukturellen Umgebung mit nahezu molekularer Auflösung dargestellt werden.
Da hochwertige Aufnahmen eine ausgereifte Probenpräparation voraussetzen, darf deren Etablierung nicht zu kurz kommen. Unter dieser Prämisse wurde ein optimiertes Markierungsprotokoll mit dem Namen ClickOx entwickelt. Mit ClickOx bleibt bei der kupferkatalysierten Azid-Alkin-Cycloaddition die Feinstruktur von Aktinfilamenten, sowie die Fluoreszenz fluoreszierender Proteine, deutlich sichtbar erhalten. Während bei den klassischen Click-Protokollen auf Grund der Entstehung von reaktiven Sauerstoff-Spezies (ROS) feine zelluläre Strukturen, wie Aktinfilamente, angegriffen oder zerstört werden, schützt das neue Protokoll mit enzymatischem Sauerstoffentzug Proteine und somit Strukturen vor Reaktionen mit ROS. Das unterstreicht, wie wichtig es ist auch sogenannte "etablierte" Protokolle weiterzuentwickeln, denn bestimmte Nebeneffekte in Präparationen werden unter Umständen erstmals in der Hochauflösung sichtbar.
Ein weiterer Aspekt war die Untersuchung des Einflusses von D1 auf die Chromatinorganisation. Mit verschiedenen mikroskopischen Methoden konnten Hinweise auf eine mögliche DNA-Cross-Linking-Fähigkeit dieses Proteins gesammelt werden. Hier wurde die Einzelmolekülinformation der dSTORM-Filme genutzt, um unterschiedliche Grade von DNA- bzw. Chromatin-Akkumulation zu vergleichen. Die Ergebnisse deuten darauf hin, dass wildtypisches D1 DNA vernetzen kann. Dies erfolgt über die sogenannten AT-Haken-Motive. Sobald diese alle durch Mutation funktionsunfähig gemacht werden - wie bei der verwendeten R10xG-Mutante - lässt sich keine Akkumulation der DNA mehr beobachten. Neben der Chromatinaggregation durch D1-Expression konnte in FRAP-Experimenten gezeigt werden, dass nur die "echten" AT-Haken eine hohe Affinität zum Chromatin aufweisen, die sogenannten "potentiellen" hingegen nicht.
We review fluorescent probes that can be photoswitched or photoactivated and are suited for single-molecule localization based super-resolution microscopy. We exploit the underlying photochemical mechanisms that allow photoswitching of many synthetic organic fluorophores in the presence of reducing agents, and study the impact of these on the photoswitching properties of various photoactivatable or photoconvertible fluorescent proteins. We have identified mEos2 as a fluorescent protein that exhibits reversible photoswitching under various imaging buffer conditions and present strategies to characterize reversible photoswitching. Finally, we discuss opportunities to combine fluorescent proteins with organic fluorophores for dual-color photoswitching microscopy.
We review fluorescent probes that can be photoswitched or photoactivated and are suited for single-molecule localization based super-resolution microscopy. We exploit the underlying photochemical mechanisms that allow photoswitching of many synthetic organic fluorophores in the presence of reducing agents, and study the impact of these on the photoswitching properties of various photoactivatable or photoconvertible fluorescent proteins. We have identified mEos2 as a fluorescent protein that exhibits reversible photoswitching under various imaging buffer conditions and present strategies to characterize reversible photoswitching. Finally, we discuss opportunities to combine fluorescent proteins with organic fluorophores for dual-color photoswitching microscopy.
Single-molecule super-resolution microscopy (SMLM) techniques like dSTORM can reveal biological structures down to the nanometer scale. The achievable resolution is not only defined by the localization precision of individual fluorescent molecules, but also by their density, which becomes a limiting factor e.g., in expansion microscopy. Artificial deep neural networks can learn to reconstruct dense super-resolved structures such as microtubules from a sparse, noisy set of data points. This approach requires a robust method to assess the quality of a predicted density image and to quantitatively compare it to a ground truth image. Such a quality measure needs to be differentiable to be applied as loss function in deep learning. We developed a new trainable quality measure based on Fourier Ring Correlation (FRC) and used it to train deep neural networks to map a small number of sampling points to an underlying density. Smooth ground truth images of microtubules were generated from localization coordinates using an anisotropic Gaussian kernel density estimator. We show that the FRC criterion ideally complements the existing state-of-the-art multiscale structural similarity index, since both are interpretable and there is no trade-off between them during optimization. The TensorFlow implementation of our FRC metric can easily be integrated into existing deep learning workflows.