@phdthesis{Rauch2020,
  author    = {Rauch, Florian},
  title     = {1,3-Bis(trifluoromethyl)benzene: A Versatile Building Block for the Synthesis of New Boron-Containing Conjugated Systems},
  doi       = {10.25972/OPUS-21147},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-211478},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2020},
  abstract  = {Chapter 1 Thermally activated delayed fluorescence (TADF) materials provide a strategy to improve external quantum efficiencies of organic light emitting diodes (OLEDs). Because of spin-statistics, 25\% singlet and 75\% triplet excitons are generated in an electronic device. Conventional organic emitters cannot harvest the triplet excitons, due to low spin orbit coupling, and exhibit low external quantum efficiencies. TADF materials have to be designed in such a way, that the energy gap between the lowest singlet and triplet states (ΔES-T) is sufficiently small to allow reverse intersystem crossing (rISC) in organic systems. An established structure property relationship for the generation of TADF materials is the spatial separation of HOMO and LUMO via an orthogonal arrangement of donor and acceptor in donor-π-acceptor (D-π-A) compounds. This is achieved by increasing the steric bulk of the π-bridge. However, this is not always the most efficient method and electronic parameters have to be considered. In a combined experimental and theoretical study, a computational protocol to predict the excited states in D-π-A compounds containing the B(FXyl)2 (FXyl = 2,6-bis(trifluoromethyl)phenyl) acceptor group for the design of new TADF emitters is presented. To this end, the effect of different donor and π-bridge moieties on the energy gaps between local and charge-transfer singlet and triplet states was examined. To prove the computationally aided design concept, the D-π-B(FXyl)2 compounds Cbz-π (1), Cbz-Meπ (2), Phox-Meπ (3), Phox-MeOπ (4), and MeO₃Ph-FMeπ (5) were synthesized and fully characterized. The photophysical properties of these compounds in various solvents, polymeric film and in a frozen matrix were investigated in detail and show excellent agreement with the computationally obtained data (Figure 5.1). A simple structure-property relationship based on the molecular fragment orbitals of the donor and the π-bridge which minimize the relevant singlet-triplet gaps to achieve efficient TADF emitters is presented.   Chapter 2 Three-coordinate boron is widely used as an acceptor in conjugated materials. In recent years the employment of trifluoromethylated aryls was shown to improve the acceptor properties of such boranes. Astonishingly, the use of ortho-trifluoromethylated aryls in boron containing systems also improves the stability of those systems in regard to their inherent reactivity towards nucleophiles. Borafluorenes are stronger acceptors than their non-annulated triarylborane derivatives. In previous studies, the effect of trifluoromethylated aryls as the exo-aryl moieties in borafluorenes, as well as the effect of fluorination on the backbone, were examined. As the latter suffers from a very low stability, systems using trifluoromethyl groups, both on the exo-aryl as well as the borafluorene backbone were designed in order to maximize both the stability as well as the acceptor strength. Three different perfluoroalkylated borafluorenes were prepared and their electronic and photophysical properties were investigated. The systems have four trifluoromethyl moieties on the borafluorene moiety as well as two trifluoromethyl groups at the ortho positions of their exo-aryl moieties. They differ with regard to the para-substituents on their exo-aryl moieties, being a proton (FXylFBf), a trifluoromethyl group (FMesFBf) or a dimethylamino group (p NMe2-FXylFBf), respectively. Furthermore, an acetonitrile adduct of FMesFBf was obtained and characterized. All derivatives exhibit extraordinarily low reduction potentials, comparable to those of perylenediimides. The most electron deficient derivative FMesFBf was also chemically reduced and its radical anion isolated and characterized. Furthermore, the photophysical properties of all compounds were investigated. All compounds exhibit weakly allowed lowest energy absorptions and very long fluorescent lifetimes of ca. 250 ns up to 1.6 μs; however, the underlying mechanisms differ. The donor substituted derivative p-NMe2-FXylFBf exhibits thermally activated delayed fluorescence from a charge transfer (CT) state, while the FMesFBf and FXylFBf borafluorenes exhibit only weakly allowed locally excited (LE) transitions due to their symmetry and low transition dipole moments, as suggested by DFT and TD-DFT calculations.   Chapter 3 Conjugated dendrimers find wide application in various fields, such as charge transport/storage or emitter materials in organic solar cells or OLEDs. Previous studies on boron containing conjugated dendrimers are scarce and mostly employ a convergent synthesis approach, lacking a simple, generally applicable synthetic access. A new divergent approach was designed and conjugated triarylborane dendrimers were synthesized up to the 2nd generation. The synthetic strategy consists of three steps: 1) functionalization, via iridium catalyzed C-H borylation; 2) activation, via fluorination of the generated boronate ester with K[HF2] or [N(nBu)4][HF2]; and 3) expansion, via reaction of the trifluoroborate salts with aryl Grignard reagents. The concept was also shown to be viable for a convergent approach. All but one of the conjugated borane dendrimers exhibit multiple, distinct and reversible reduction potentials, making them potentially interesting materials for applications in molecular accumulators (Figure 5.7). Based on their photophysical properties, the 1st generation dendrimers exhibit good conjugation over the whole system. The conjugation does not further increase upon expansion to the 2nd generation, but the molar extinction coefficients increase linearly with the number of triarylborane sub-units, suggesting a potential application as photonic antennas.   Chapter 4 A surprisingly high electronically-driven regioselectivity for the iridium-catalyzed C-H borylation using [Ir(COD)OMe]2 (COD = 1,5-cyclooctadiene) as the precatalytic species, bis(pinacolato)diboron (B2pin2) as the boron source and 4,4'-ditertbutyl-2,2'-bipyridin (dtbpy) as the ligand of D-π-A systems with diphenylamino (1) or carbazolyl (2) moieties as the donor, bis(2,6-bis(trifluoromethyl)phenyl)boryl (B(FXyl)2) as the acceptor, and 1,4-phenylene as the π-bridge was observed. Under these conditions, borylation was observed only at the sterically least encumbered para-positions of the acceptor groups. As boronate esters are versatile building blocks for organic synthesis (C-C coupling, functional group transformations), the C-H borylation represents a simple potential method for post-functionalization by which electronic or other properties of D-π-A systems can be fine-tuned for specific applications. The photophysical and electrochemical properties of the borylated (1-(Bpin)2) and unborylated (1) diphenylamino-substituted D-π-A systems were investigated. Interestingly, the borylated derivative exhibits coordination of THF to the boronate ester moieties, influencing the photophysical properties and exemplifying the non-innocence of boronate esters.},
  subject      = {Triarylborane},
  language  = {en}
}
@phdthesis{Reitzenstein2010,
  author    = {Reitzenstein, D{\"o}rte},
  title     = {Donor-Acceptor Conjugated Polymers for Application in Organic Electronic Devices},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-53939},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2010},
  abstract  = {In the first part of the work three polycarbazoles poly[N-((4-dimesitylboryl)-3,5-dimethylphenyl)-carbazole]-2,7-diyl P1, poly[N-((4-dimesitylboryl)-3,5-dimethylphenyl)-carbazole]-3,6-diyl P2 and poly[N-(4-(diphenylmethylene)-phenyl)- carbazole]-2,7-diyl P3 were synthesized by Yamamoto coupling reaction and their spectroscopic and electrochemical properties were investigated. Absorption and fluorescence characteristics of P1 and P3 were found to be similar to other 2,7-linked polycarbazoles, whereas P2 shows a CT absorption band arising from a shift of electron density from the nitrogen of the carbazole donor to the triarylborane acceptor. This causes a negative solvatochromic absorption and a positive solvatochromic fluorescence behaviour and is responsible for the significantly enlarged fluorescence quantum efficiency in solution and solid state compared to other 3,6-linked polycarbazoles. Thus the spectroscopic properties are governed by the connection pattern: the 2,7-linked polycarbazoles are not affected by the acceptor substituent due to the rigid poly-para-phenylene-like backbone structure, whereas the 3,6-linked polycarbazole P2 is dominated by the properties of the monomer unit due to its more flexible (less conjugated) structure. The oxidative processes of P1-P3 have been investigated in detail by cyclic voltammetry, which are similar to known 2,7- and 3,6-polycarbazoles. The reversible reduction found for P1 and P2, respectively, is attributed to the reduction of the triarylborane moiety. No reduction process referring to the carbazole moiety was observed. Due to its better solubility compared to P1 and P3 only P2 was used as active layer in an OLED device (ITO/P2/Al). The electroluminescence spectrum revealed CIE coordinates of (0.17, 0.21). In the second part of the work the low band gap polyradical poly{[((2,3,4,5,6-pentachlorophenyl)-bis(2,3,5,6-tetrachlorophenyl)methyl radical)-4,4'-diyl]-alt-4,4'-bis(vinylphenyl)-4-(2-ethylhexyloxy)phenylamin} P4 was synthesized by Horner-Emmons reaction. It shows an IV-CT band in the NIR, which arises from an ET from the triarylamine donor to the PCTM radical acceptor. This transition is confined to one monomer unit as deduced from comparison with the monomer spectra. HOMO and LUMO of P4 determined by cyclic voltammetry are at -5.5 and -4.5 eV, respectively. The smaller electrochemical band gap (1.0 eV) compared to the optical band gap (1.2 eV) is probably caused by ion pairing effects in the electrochemical experiments and indicates a low exciton binding energy. Femtosecond-pump-probe transient absorption spectroscopy revealed the spectral features of the oxidized triarylamine donor and the reduced PCTM acceptor similar to the spectra obtained separately for positive and negative potentials by spectroelectrochemistry. Thus the ET event causing the IV-CT absorption band could unambiguously be identified. The decay of the IV-CT state was found to be biexponential. The fast solvent dependent decay component is ascribed to the direct decay from the IV-CT state to the ground state, whereas the slow solvent independent decay component is tentatively attributed to an equilibrium formation of the IV-CT state and a completely charge separated state formed by charge migration along the polymer backbone. Well balanced ambipolar charge transport with hole and electron mobilities of ca. 3 × 10-5 cm2 V-1 s-1 was found in OFET devices (BG/TC structure) comprising an additional insulating organic PPcB layer. Polymer/polymer BHJ solar cell devices with the structure glass/ITO/PEDOT:PSS/(P3HT/P4)/Ca/Al yielded a power conversion efficiency of 3.1 × 10-3 \%, VOC = 0.38 V, JSC = 2.8 × 10-2 mA cm-2 and FF = 0.29 for the 1:4 (P3HT/P4) blend ratio. The improper solid state morphology of P4 that causes the unsatisfying performance of OFET and solar cell devices renders P4 less suitable for these applications, whereas the hypothesis of charge migration in the excited state is worth to be investigated in more detail.},
  subject      = {Carbazolderivate},
  language  = {en}
}