@phdthesis{Schmitt2022,
  author    = {Schmitt, Norbert},
  title     = {Measurement, Modeling, and Emulation of Power Consumption of Distributed Systems},
  doi       = {10.25972/OPUS-27658},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-276582},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {Today's cloud data centers consume an enormous amount of energy, and energy consumption will rise in the future. An estimate from 2012 found that data centers consume about 30 billion watts of power, resulting in about 263TWh of energy usage per year. The energy consumption will rise to 1929TWh until 2030. This projected rise in energy demand is fueled by a growing number of services deployed in the cloud. 50\% of enterprise workloads have been migrated to the cloud in the last decade so far. Additionally, an increasing number of devices are using the cloud to provide functionalities and enable data centers to grow. Estimates say more than 75 billion IoT devices will be in use by 2025. The growing energy demand also increases the amount of CO2 emissions. Assuming a CO2-intensity of 200g CO2 per kWh will get us close to 227 billion tons of CO2. This emission is more than the emissions of all energy-producing power plants in Germany in 2020. However, data centers consume energy because they respond to service requests that are fulfilled through computing resources. Hence, it is not the users and devices that consume the energy in the data center but the software that controls the hardware. While the hardware is physically consuming energy, it is not always responsible for wasting energy. The software itself plays a vital role in reducing the energy consumption and CO2 emissions of data centers. The scenario of our thesis is, therefore, focused on software development. Nevertheless, we must first show developers that software contributes to energy consumption by providing evidence of its influence. The second step is to provide methods to assess an application's power consumption during different phases of the development process and to allow modern DevOps and agile development methods. We, therefore, need to have an automatic selection of system-level energy-consumption models that can accommodate rapid changes in the source code and application-level models allowing developers to locate power-consuming software parts for constant improvements. Afterward, we need emulation to assess the energy efficiency before the actual deployment.},
  subject      = {Leistungsbedarf},
  language  = {en}
}
@phdthesis{Wilde2022,
  author    = {Wilde, Martina},
  title     = {Landslide susceptibility assessment in the Chiconquiaco Mountain Range area, Veracruz (Mexico)},
  doi       = {10.25972/OPUS-27608},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-276085},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {In Mexico, numerous landslides occur each year and Veracruz represents the state with the third highest number of events. Especially the Chiconquiaco Mountain Range, located in the central part of Veracruz, is highly affected by landslides and no detailed information on the spatial distribution of existing landslides or future occurrences is available. This leaves the local population exposed to an unknown threat and unable to react appropriately to this hazard or to consider the potential landslide occurrence in future planning processes. Thus, the overall objective of the present study is to provide a comprehensive assessment of the landslide situation in the Chiconquiaco Mountain Range area. Here, the combination of a site-specific and a regional approach enables to investigate the causes, triggers, and process types as well as to model the landslide susceptibility for the entire study area. For the site-specific approach, the focus lies on characterizing the Capul{\´i}n landslide, which represents one of the largest mass movements in the area. In this context, the task is to develop a multi-methodological concept, which concentrates on cost-effective, flexible and non-invasive methods. This approach shows that the applied methods complement each other very well and their combination allows for a detailed characterization of the landslide. The analyses revealed that the Capul{\´i}n landslide is a complex mass movement type. It comprises rotational movement in the upper parts and translational movement in the lower areas, as well as flow processes at the flank and foot area and therefore, is classified as a compound slide-flow according to Cruden and Varnes (1996). Furthermore, the investigations show that the Capul{\´i}n landslide represents a reactivation of a former process. This is an important new information, especially with regard to the other landslides identified in the study area. Both the road reconstructed after the landslide, which runs through the landslide mass, and the stream causing erosion processes at the foot of the landslide severely affect the stability of the landslide, making it highly susceptible to future reactivation processes. This is particularly important as the landslide is located only few hundred meters from the village El Capul{\´i}n and an extension of the landslide area could cause severe damage. The next step in the landslide assessment consists of integrating the data obtained in the site-specific approach into the regional analysis. Here, the focus lies on transferring the generated data to the entire study area. The developed methodological concept yields applicable results, which is supported by different validation approaches. The susceptibility modeling as well as the landslide inventory reveal that the highest probability of landslides occurrence is related to the areas with moderate slopes covered by slope deposits. These slope deposits comprise material from old mass movements and erosion processes and are highly susceptible to landslides. The results give new insights into the landslide situation in the Chiconquiaco Mountain Range area, since previously landslide occurrence was related to steep slopes of basalt and andesite. The susceptibility map is a contribution to a better assessment of the landslide situation in the study area and simultaneously proves that it is crucial to include specific characteristics of the respective area into the modeling process, otherwise it is possible that the local conditions will not be represented correctly.},
  subject      = {Naturgefahren},
  language  = {en}
}