@phdthesis{Wiesner2020, author = {Wiesner, Miriam}, title = {Stem Cell-based Adipose Tissue Engineering - Engineering of Prevascularized Adipose Tissue Constructs In Vitro \& Investigation on Gap Junctional Intercellular Communication in Adipose-derived Stem Cells}, doi = {10.25972/OPUS-18500}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-185005}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {In reconstructive and plastic surgery, there exists a growing demand of adequate tissue implants, since currently available strategies for autologous transplantation are limited by complications including transplant failure and donor site morbidity. By developing in vitro and in vivo autologous substitutes for defective tissue sites, adipose tissue engineering can address these challenges, although there are several obstacles to overcome. One of the major limitations is the sufficient vascularization of in vitro engineered large constructs that remains crucial and demanding for functional tissues. Decellularized jejunal segments may represent a suitable scaffolding system with preexisting capillary structures that can be repopulated with human microvascular endothelial cells (hMVECs), and a luminal matrix applicable for the adipogenic differentiation of human adipose-derived stem cells (hASCs). Hence, co-culture of these cells in jejunal segments, utilizing a custom-made bioreactor system, was characterized in terms of vascularization and adipose tissue development. Substantial adipogenesis of hASCs was demonstrated within the jejunal lumen in contrast to non-induced controls, and the increase of key adipogenic markers was verified over time upon induction. The development of major extracellular matrix components of mature adipose tissue, such as laminin and collagen IV, was shown within the scaffold in induced samples. Successful reseeding of the vascular network with hMVECs was demonstrated in long-term culture and co-localization of vascular structures and adipogenically differentiated hASCs was observed. Therefore, these results represent a novel approach for in vitro engineering of vascularized adipose tissue constructs that warrants further investigations in preclinical studies. Another still existing obstacle in adipose tissue engineering is the insufficient knowledge about the applied cells, for instance the understanding of how cells can be optimally expanded and differentiated for successful engineering of tissue transplants. Even though hASCs can be easily isolated from liposuction of abdominal fat depots, yielding low donor site morbidity, huge numbers of cells are required to entirely seed complex and large 3D matrices or scaffolds. Thus, cells need to be large-scale expanded in vitro on the premise of not losing their differentiation capacity caused by replicative aging. Accordingly, an improved differentiation of hASCs in adipose tissue engineering approaches remains still desirable since most engineered constructs exhibit an inhomogeneous differentiation pattern. For mesenchymal stem cells (MSCs), it has been shown that growth factor application can lead to a significant improvement of both proliferation and differentiation capacity. Especially basic fibroblast growth factor (bFGF) represents a potent mitogen for MSCs, while maintaining or even promoting their osteogenic, chondrogenic and adipogenic differentiation potential. As there are currently different contradictory information present in literature about the applied bFGF concentration and the explicit effect of bFGF on ASC differentiation, here, the effect of bFGF on hASC proliferation and differentiation capacity was investigated at different concentrations and time points in 2D culture. Preculture of hASCs with bFGF prior to adipogenic induction showed a remarkable effect, whereas administration of bFGF during culture did not improve adipogenic differentiation capacity. Furthermore, the observations indicated as mode of action an impact of this preculture on cell proliferation capacity, resulting in increased cellular density at the time of adipogenic induction. The difference in cell density at this time point appeared to be pivotal for increased adipogenic capacity of the cells, which was confirmed in a further experiment employing different seeding densities. Interestingly, furthermore, the obtained results suggested a cell-cell contact-mediated mechanism positively influencing adipogenic differentiation. As a consequence, subsequently, studies were conducted focusing on intercellular communication of these cells, which has hardly been investigated to date. Despite the multitude of literature on the differentiation capacity of ASCs, little is reported about the physiological properties contributing to and controlling the process of lineage differentiation. Direct intercellular communication between adjacent cells via gap junctions has been shown to modulate differentiation processes in other cell types, with connexin 43 (Cx43) being the most abundant isoform of the gap junction-forming connexins. Thus, in the present study we focused on the expression of Cx43 and gap junctional intercellular communication (GJIC) in hASCs, and its significance for adipogenic differentiation of these cells. Cx43 expression in hASCs was demonstrated histologically and on the gene and protein expression level and was shown to be greatly positively influenced by cell seeding density. Functionality of gap junctions was proven by dye transfer analysis in growth medium. Adipogenic differentiation of hASCs was shown to be also distinctly elevated at higher cell seeding densities. Inhibition of GJIC by 18α-glycyrrhetinic acid significantly compromised adipogenic differentiation, as demonstrated by histology, triglyceride quantification, and adipogenic marker gene expression. Flow cytometry analysis showed a lower proportion of cells undergoing adipogenesis when GJIC was inhibited, further indicating the importance of GJIC in the differentiation process. Altogether, these results demonstrate the impact of direct cell-cell communication via gap junctions on the adipogenic differentiation process of hASCs and may contribute to further integrate direct intercellular crosstalk in rationales for tissue engineering approaches.}, subject = {Tissue Engineering}, language = {en} } @phdthesis{WeyhmuellerReboredo2014, author = {Weyhm{\"u}ller Reboredo, Jenny}, title = {Tissue Engineering eines Meniskus - Vom Biomaterial zum Implantat}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-108477}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {Der Meniskus, ein scheibenf{\"o}rmiger Faserknorpel, spielt im Kniegelenk eine bedeutende Rolle, weil er Kr{\"a}fte und Druck im Kniegelenk gleichm{\"a}ßig verteilt, St{\"o}ße d{\"a}mpft sowie der Kraft{\"u}bertragung und Stabilisierung dient. Durch die Entfernung des Gewebes, der sogenannten Totalmeniskektomie, nach einer Meniskusverletzung oder einem Riss, ver{\"a}ndern sich die mechanischen Eigenschaften des Gelenks stark und verursachen durch die erh{\"o}hte Belastung der Gelenkfl{\"a}chen Arthrose. Arthrose ist weltweit die H{\"a}ufigste aller Gelenkerkrankungen. Der Erhalt der k{\"o}rperlichen Leistungsf{\"a}higkeit und Mobilit{\"a}t bis ins hohe Alter sowie die Bewahrung der Gesundheit von Herz-Kreislauf- und Stoffwechselorganen z{\"a}hlen aufgrund des demografischen Wandels zu den großen medizinischen Herausforderungen. Die Erkrankung des muskuloskelettalen Systems stellte 2010 im Bundesgebiet die am h{\"a}ufigsten vorkommende Krankheitsart dar. W{\"a}hrend Risse in den {\"a}ußeren Teilen des Meniskus aufgrund des Anschlusses an das Blutgef{\"a}ßsystem spontan heilen k{\"o}nnen, k{\"o}nnen sie dies in tieferen Zonen nicht. Durch die begrenzte Heilungsf{\"a}higkeit des Knorpels bleibt langfristig der Einsatz eines Ersatzgewebes die einzige therapeutische Alternative. In der vorliegenden Arbeit wurde als therapeutische Alternative erfolgreich ein vaskularisiertes Meniskusersatzgewebe mit Methoden des Tissue Engineering entwickelt. Es soll in Zukunft als Implantat Verwendung finden. Tissue Engineering ist ein interdisziplin{\"a}res Forschungsfeld, in dem Gewebe außerhalb des K{\"o}rpers generiert werden. Schl{\"u}sselkomponenten sind Zellen, die aus einem Organismus isoliert werden, und Tr{\"a}gerstrukturen, die mit Zellen besiedelt werden. Die Biomaterialien geben den Zellen eine geeignete Umgebung, die die Extrazellul{\"a}re Matrix (EZM) ersetzen soll, um die Funktion der Zellen beizubehalten, eigene Matrix zu bilden. Zum Erhalt eines funktionelles Gewebes werden oftmals dynamische Kultursysteme, sogenannte Bioreaktoren, verwendet, die nat{\"u}rliche Stimuli wie beispielsweise den Blutfluss oder mechanische Kompressionskr{\"a}fte w{\"a}hrend der in vitro Reifungsphase des Gewebes, zur Verf{\"u}gung stellen. Das Gewebekonstrukt wurde auf Basis nat{\"u}rlicher Biomaterialien aufgebaut, unter Verwendung ausschließlich prim{\"a}rer Zellen, die sp{\"a}ter direkt vom Patienten gewonnen werden k{\"o}nnen und damit Abstoßungsreaktionen auszuschließen sind. Da der Meniskus teilvaskularisiert ist und die in vivo Situation des Gewebes bestm{\"o}glich nachgebaut werden sollte, wurden Konstrukte mit mehreren Zelltypen, sogenannte Ko-Kulturen aufgebaut. Neben mikrovaskul{\"a}ren Endothelzellen (mvEZ) und Meniskuszellen (MZ) erfolgten Versuche mit mesenchymalen Stammzellen (MSZ). Zur Bereitstellung einer zelltypspezifischen Matrixumgebung, diente den mvEZ ein St{\"u}ck Schweinedarm mit azellularisierten Gef{\"a}ßstrukturen (BioVaSc®) und den MZ diente eine geeig- nete Kollagenmatrix (Kollagen Typ I Hydrogel). Die Validierung und Charakterisierung des aufgebauten 3D Meniskuskonstrukts, welches in einem dynamischen Perfusions-Bioreaktorsystem kultiviert wurde, erfolgte mit knorpeltypischen Matrixmarkern wie Aggrekan, Kollagen Typ I, II und X sowie mit den Transkriptionsfaktoren RunX2 und Sox9, die in der Knorpelentstehung von großer Bedeutung sind. Zus{\"a}tzlich erfolgten Auswertungen mit endothelzellspezifischen Markern wie vWF, CD31 und VEGF, um die Vaskularisierung im Konstrukt nachzuweisen. Analysiert wurden auch die Zellvitalit{\"a}ten in den Konstrukten. Aufgrund einer nur geringen Verf{\"u}gbarkeit von MZ wurden Kulturans{\"a}tze mit alternativen Zellquellen, den MSZ, durchgef{\"u}hrt. Daf{\"u}r erfolgte zun{\"a}chst deren Isolation und Charakterisierung und die Auswahl einer geeigneten 3D Kollagenmatrix. Die beste Zellintegration der MSZ konnte auf einer eigens hergestellten elektrogesponnenen Matrix beobachtet werden. Die Matrix besteht aus zwei unterschiedlichen Kollagentypen, die auf insgesamt f{\"u}nf Schichten verteilt sind. Die Fasern besitzen weiter unterschiedliche Ausrichtungen. W{\"a}hrend die Kollagen Typ I Fasern in den {\"a}ußeren Schichten keiner Ausrichtung zugeh{\"o}ren, liegen die Kollagen Typ II Fasern in der mittleren Schicht parallel zueinander. Der native Meniskus war f{\"u}r den Aufbau einer solchen Kollagen-Tr{\"a}gerstruktur das nat{\"u}rliche Vorbild, das imitiert werden sollte. Nach der Besiedelung der Matrix mit MSZ, konnte eine Integration der Zellen bereits nach vier Tagen bis in die Mittelschicht sowie eine spontane chondrogene Differenzierung nach einer insgesamt dreiw{\"o}chigen Kultivierung gezeigt werden. Das Biomaterial stellt in Hinblick auf die Differenzierung der Zellen ohne die Zugabe von Wachstumsfaktoren eine relevante Bedeutung f{\"u}r klinische Studien dar. Zur Kultivierung des 3D Meniskuskonstrukts wurde ein Bioreaktor entwickelt. Mit diesem k{\"o}nnen neben Perfusion der Gef{\"a}ßsysteme zus{\"a}tzlich Kompressionskr{\"a}fte sowie Scherspannungen auf das Ersatzgewebe appliziert und die Differenzierung von MZ bzw. MSZ w{\"a}hrend der in vitro Kultur {\"u}ber mechanische Reize stimuliert werden. Ein anderes Anwendungsfeld f{\"u}r den neuartigen Bioreaktor ist seine Verwendung als Pr{\"u}ftestsystem f{\"u}r die Optimierung und Qualit{\"a}tssicherung von Gewebekonstrukten.}, subject = {Tissue Engineering}, language = {de} } @phdthesis{WeigelgebSchneider2022, author = {Weigel [geb. Schneider], Verena}, title = {Entwicklung eines \(in\) \(vitro\) Modells f{\"u}r Verbrennungen ersten Grades zur Testung einer zellbasierten Wundauflage}, doi = {10.25972/OPUS-26151}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-261514}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {Mit j{\"a}hrlich circa 11 Millionen F{\"a}llen weltweit, stellen schwere Brandwunden bis heute einen großen Anteil an Verletzungen dar, die in Kliniken behandelt werden m{\"u}ssen. W{\"a}hrend leichte Verbrennungen meist problemlos heilen, bedarf die Behandlung tieferer Verbrennungen medizinischer Intervention. Zellbasierte Therapeutika zeigen hier bereits große Erfolge, aufgrund der eingeschr{\"a}nkten {\"U}bertragbarkeit von Ergebnissen aus Tiermodellen ist jedoch sowohl die Testung neuer Produkte, als auch die Erforschung der Wundheilung bei Brandwunden noch immer schwierig. Aufgrund dessen wurden in dieser Arbeit zwei Ziele verfolgt: Die Etablierung von Methoden, um ein zellbasiertes Therapeutikum produzieren zu k{\"o}nnen und die Entwicklung eines Modells zur Untersuchung von Verbrennungswunden. Zun{\"a}chst wurden hierf{\"u}r die Kulturbedingungen und -protokolle zur Isolation und Expansion von Keratinozyten so angepasst, dass sie g{\"a}ngigen Regularien zur Produktion medizinischer Produkte entsprechen. Hier zeigten die Zellen auch in anschließenden Analysen, dass charakteristische Merkmale nicht verloren hatten. Dar{\"u}ber hinaus gelang es, die Zellen mithilfe verschiedener protektiver Substanzen erfolgreich einzufrieren und zu konservieren. Des Weiteren konnte ein Modell etabliert werden, das eine Verbrennung ersten Grades widerspiegelt. {\"U}ber einen Zeitraum von zwei Wochen wurde seine Regeneration hinsichtlich verschiedener Aspekte, wie der Histomorphologie, dem Metabolismus und der Reepithelialisierungsrate, untersucht. Die Modelle zeigten hier viele Parallelen zur Wundheilung in vivo auf. Um die Eignung der Modelle zur Testung von Wirkstoffen zu ermitteln wurde außerdem eine Behandlung mit 5\% Dexpanthenol getestet. Sie resultierte in einer verbesserten Histomorphologie und einer erh{\"o}hten Anzahl an proliferativen Zellen in den Modellen, beschleunigte jedoch die Reepithelialisierung nicht. Zusammengefasst konnten in dieser Arbeit zun{\"a}chst Methoden etabliert werden, um ein medizinisches Produkt aus Keratinozyten herzustellen und zu charakterisieren. Außerdem wurde ein Modell entwickelt, anhand dessen die Wundheilung und Behandlung von Verbrennungen ersten Grades untersucht werden kann und welches als Basis zur Entwicklung von Modellen von tieferen Verbrennungen dienen kann.}, subject = {Tissue Engineering}, language = {de} } @phdthesis{Wallstabe2020, author = {Wallstabe, Julia}, title = {Induktion von GvHD-artigen Gewebesch{\"a}den an humanen artifiziellen Hautmodellen}, doi = {10.25972/OPUS-15396}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-153966}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {Graft-versus-Host Disease (GvHD) stellt einen h{\"a}ufigen, den Gesamterfolg einer allogenen h{\"a}matopoetischen Stammzelltransplantation limitierenden Faktor dar. Bei dieser Komplikation attackieren vor allem alloreaktive T-Lymphozyten des Stammzellspenders gesunde K{\"o}rperzellen des Patienten. Infolgedessen kommt es zu Gewebesch{\"a}den in den Zielorganen Haut, Leber und Darm. Die Behandlung der GvHD erfordert eine effektive Immunsuppression, was wiederum Graft-versusTumor-Effekte kompromittiert und den R{\"u}ckfall der malignen Grunderkrankung bedingen kann. Viele Patienten sprechen aus bisher ungekl{\"a}rten Gr{\"u}nden nicht auf die klassische immunsuppressive Therapie mit Steroiden oder second-line Therapien an. Neue zellul{\"a}re Therapien zur Behandlung der refrakt{\"a}ren GvHD sind auf dem Vormarsch, bed{\"u}rfen aber einer weiterf{\"u}hrenden klinischen Testung, auch um die exakten Wirkungsmechanismen zu verstehen. Idealerweise k{\"o}nnten neue Testsysteme das GvHD-Potential von allogenen Stammzellpr{\"a}paraten oder aber das immunsuppressive Potential von neuen GvHD-Therapien vorhersagen, bevor diese in klinischen Studien eingesetzt werden. Ziel der vorliegenden Arbeit war es, ein erstes, in multiplen Replikaten einsetzbares, humanes organotypisches Gewebemodell zur Simulation einer GvHD-Reaktion am Beispiel der Haut zu etablieren. Zu diesem Zweck wurden artifizielle humane Hautmodelle unter statischen (KollagenHautmodelle) und dynamischen Kulturbedingungen (vaskularisierte Hautmodelle) generiert. Die Injektion unstimulierter PBMCs (engl. peripheral blood mononuclear cells) f{\"u}hrte zu keinen histomorphologischen Ver{\"a}nderungen in den KollagenHautmodellen. Im Gegensatz dazu hatte die Injektion vorstimulierter allogener PBMCs eine Zerst{\"o}rung der epidermalen Strukturen der Kollagen-Hautmodelle zur Folge, welche vergleichbar waren mit Gewebesch{\"a}den bei einer akuten GvHD der Haut. Dieselben Sch{\"a}digungen der Epidermis wurden durch die Injektion von Medium{\"u}berst{\"a}nden vorstimulierter PBMCs in die Kollagen-Hautmodelle erreicht. Im Kulturmedium der Kollagen-Hautmodelle wurden hohe Konzentrationen von Interleukin 2 und 17, Interferon gamma sowie Tumornekrosefaktor alpha gemessen, wodurch auf die Beteiligung von Zytokinen an der inflammatorischen Reaktion geschlossen werden konnte. Auch im komplexeren vaskularisierten Hautmodell verursachte die Injektion vorstimulierter PBMCs histomorphologische Ver{\"a}nderungen entsprechend einer akuten Haut-GvHD sowie einen zeitabh{\"a}ngigen Anstieg proinflammatorischer Zytokine. Zusammenfassend zeigen die Resultate dieser Arbeit, dass die Induktion einer starken Inflammations- und Immunreaktion in artifiziellen humanen Hautmodellen, welche histomorphologisch eine GvHD imitiert, m{\"o}glich ist. Dieses Modell k{\"o}nnte als Grundlage f{\"u}r die Entwicklung eines klinisch relevanten Testsystems zur Bestimmung des GvHD-Restpotentials oder zur Festlegung der immunsuppressiven Kapazit{\"a}t innovativer Zellpr{\"a}parate dienen. Somit k{\"o}nnten humane artifizielle GvHDModelle in klinischen Studien eingesetzt werden und die Erfahrungen aus Tiermodellen erg{\"a}nzen sowie erste in vitro Ergebnisse im humanen System liefern, welche dann mit dem tats{\"a}chlichen klinischen Resultat verglichen werden k{\"o}nnten.}, subject = {Graft-versus-host-disease}, language = {de} } @phdthesis{Schuerlein2016, author = {Sch{\"u}rlein, Sebastian}, title = {Entwicklung von Technologien zur Optimierung von Tissue Engineering Prozessen am Beispiel der Herstellung von kardialem Gewebe}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142432}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2016}, abstract = {Kardiovaskul{\"a}re Erkrankungen, wie beispielsweise der Herzinfarkt, sind die h{\"a}ufigste Todesursache weltweit. Bei einem Herzinfarkt sterben Areale des Herzens aufgrund einer Unterversorgung mit Blut ab. Da das Herzmuskelgewebe ein sogenanntes terminal differenziertes Gewebe ist, kommt es zu keiner Regeneration des Gewebes, mit der Folge einer Herzinsuffizienz beziehungsweise dem Tod des Patienten. Eine alternative Behandlungsm{\"o}glichkeit zu einer Herztransplantation stellt das Tissue Engineering dar. Mit Hilfe des Tissue Engineerings k{\"o}nnen dreidimensionale Gewebe aufgebaut und kultiviert werden, um auf diese Weise ein funktionelles Gewebe zu erhalten, durch welches das abgestorbene Gewebeareal des Herzens zuk{\"u}nftig auch ersetzt werden k{\"o}nnte. In der vorliegenden Arbeit wurden notwendige Technologien f{\"u}r den Aufbau von Geweben entwickelt sowie erste Versuche f{\"u}r die Erzeugung eines funktionellen Herzmuskelgewebes durchgef{\"u}hrt. Beim Aufbau von dreidimensionalen Geweben finden Tr{\"a}gerstrukturen Anwendung, die mit Zellen besiedelt werden. Solche Tr{\"a}gerstrukturen k{\"o}nnen aus biologischen oder synthetischen Polymeren hergestellt sein oder aus der extrazellul{\"a}ren Matrix eines dezellularisierten Gewebes bestehen. F{\"u}r eine standardisierte Dezellularisierung von Geweben wurde eine computergesteuerte Pumpeneinheit, f{\"u}r die Herstellung von Nanofaserscaffolds eine Elektrospinninganlage entwickelt. Mit Hilfe der Dezellularisierungseinheit k{\"o}nnen komplexe Organe, wie ein Herz im Ganzen, reproduzierbar dezellularisiert werden. Untersuchungen der mittels Elektrospinning hergestellten Nanofaserscaffolds, welche als Alternative zu der dezellularisierten, nat{\"u}rlichen Matrix eingesetzt werden k{\"o}nnen, zeigten bei allen hergestellten Zusammensetzungen eine Orientierung der Zellen entlang der Fasern. Die Kultivierung von Zellmatrixkonstrukten erfolgt im Tissue Engineering h{\"a}ufig unter dynamischen Bedingungen. Hierf{\"u}r wurde ein mobiler Stand Alone Inkubator mit der erforderlichen Peripherie f{\"u}r eine Kultur unter Perfusion des Gewebes entwickelt. Als Weiterentwicklung des Stand Alone Inkubators ist eine modulare Bioreaktorplattform, bestehend aus W{\"a}rmetauscher, Beutelpumpe und Gasaustauscher, aufgebaut worden. In dieses System kann {\"u}ber Standard Anschl{\"u}sse jegliche Art von Bioreaktor in das System eingebunden werden. Durch die Kompaktheit des Systems ist es m{\"o}glich mehrere Ans{\"a}tze parallel auf engem Raum durchzuf{\"u}hren. Die Funktion der Plattform, wurde in der vorliegenden Arbeit durch die Gewebekultur einer nativen porzinen Karotis nachgewiesen. F{\"u}r den Aufbau des kardialen Gewebes dient die small intestinal submucosa ohne Serosa (SISser) als Tr{\"a}gerstruktur. Der Aufbau des Gewebekonstrukts erfolgte in verschiedenen Ans{\"a}tzen unter Einsatz verschiedener Zellarten. Native, aus Herzbiopsien generierte Cardiosphere derived cells (CDCs) verteilten sich gleichm{\"a}ßige {\"u}ber die Oberfl{\"a}che der Matrix, jedoch konnten immunhistologisch keine spezifischen kardialen Marker bei den artifiziellen Geweben nachgewiesen werden. Zellmatrixkonstrukte aus einer Mono Kultur von Kardiomyozyten, differenziert aus induzierten pluripotenten Stammzellen (iPS Zellen) sowie einer Co Kultur dieser Kardiomyozyten mit mesenchymalen Stammzellen und Zellen aus einer Herzbiopsie zeigten nach wenigen Tagen in Kultur ein kontraktiles Verhalten. Immunhistologische F{\"a}rbungen der beiden Gewebe best{\"a}tigten die Expression der spezifischen kardialen Marker, wie beispielsweise kardiales Troponin T, kardiales Troponin C und alpha Actinin. Die Kardiomyozyten der Mono Kultur sind jedoch nicht {\"u}ber die gesamte Matrixoberfl{\"a}che verteilt, sondern bilden Aggregate. Bei der Co Kultur kann eine gleichm{\"a}ßige Verteilung der Zellen auf der Matrix beobachtet werden. Der vielversprechendste Ansatz f{\"u}r den Aufbau eines Herzmuskelgewebes, welches als Implantat oder Testsystem eingesetzt werden kann, bildet nach den in dieser Arbeit erzielten Ergebnissen, ein Konstrukt aus der SISser und der Co Kultur der Zellen. Allerdings muss die Zusammensetzung der Co Kultur sowie das Verh{\"a}ltnis der Zellzahlen optimiert werden.}, subject = {Tissue Engineering}, language = {de} } @phdthesis{Schweinlin2016, author = {Schweinlin, Matthias Oliver}, title = {Development of advanced human intestinal in vitro models}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142571}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2016}, abstract = {The main function of the small intestine is the absorption of essential nutrients, water and vitamins. Moreover, it constitutes a barrier protecting us from toxic xenobiotics and pathogens. For a better understanding of these processes, the development of intestinal in vitro models is of great interest to the study of pharmacological and pathological issues such as transport mechanisms and barrier function. Depending on the scientific questions, models of different complexity can be applied. In vitro Transwell® systems based on a porous PET-membrane enable the standardized study of transport mechanisms across the intestinal barrier as well as the investigation of the influence of target substances on barrier integrity. However, this artificial setup reflects only limited aspects of the physiology of the native small intestine and can pose an additional physical barrier. Hence, the applications of this model for tissue engineering are limited. Previously, tissue models based on a biological decellularized scaffold derived from porcine gut tissue were demonstrated to be a good alternative to the commonly used Transwell® system. This study showed that preserved biological extracellular matrix components like collagen and elastin provide a natural environment for the epithelial cells, promoting cell adhesion and growth. Intestinal epithelial cells such as Caco-2 cultured on such a scaffold showed a confluent, tight monolayer on the apical surface. Additionally, myofibroblasts were able to migrate into the scaffold supporting intestinal barrier formation. In this thesis, dendritic cells were additionally introduced to this model mimicking an important component of the immune system. This co-culture model was then successfully proven to be suitable for the screening of particle formulations developed as delivery system for cancer antigens in peroral vaccination studies. In particular, nanoparticles based on PLGA, PEG-PAGE-PLGA, Mannose-PEG-PAGE-PLGA and Chitosan were tested. Uptake studies revealed only slight differences in the transcellular transport rate among the different particles. Dendritic cells were shown to phagocytose the particles after they have passed the intestinal barrier. The particles demonstrated to be an effective carrier system to transport peptides across the intestinal barrier and therefore present a useful tool for the development of novel drugs. Furthermore, to mimic the complex structure and physiology of the gut including the presence of multiple different cell types, the Caco-2 cell line was replaced by primary intestinal cells to set up a de novo tissue model. To that end, intestinal crypts including undifferentiated stem cells and progenitor cells were isolated from human small intestinal tissue samples (jejunum) and expanded in vitro in organoid cultures. Cells were cultured on the decellularized porcine gut matrix in co-culture with intestinal myofibroblasts. These novel tissue models were maintained under either static or dynamic conditions. Primary intestinal epithelial cells formed a confluent monolayer including the major differentiated cell types positive for mucin (goblet cells), villin (enterocytes), chromogranin A (enteroendocrine cells) and lysozyme (paneth cells). Electron microscopy images depicted essential functional units of an intact epithelium, such as microvilli and tight junctions. FITC-dextran permeability and TEER measurements were used to assess tightness of the cell layer. Models showed characteristic transport activity for several reference substances. Mechanical stimulation of the cells by a dynamic culture system had a great impact on barrier integrity and transporter activity resulting in a tighter barrier and a higher efflux transporter activity. In Summary, the use of primary human intestinal cells combined with a biological decellularized scaffold offers a new and promising way to setup more physiological intestinal in vitro models. Maintenance of primary intestinal stem cells with their proliferation and differentiation potential together with adjusted culture protocols might help further improve the models. In particular, dynamic culture systems and co culture models proofed to be a first crucial steps towards a more physiological model. Such tissue models might be useful to improve the predictive power of in vitro models and in vitro in vivo correlation (IVIVC) studies. Moreover, these tissue models will be useful tools in preclinical studies to test pharmaceutical substances, probiotic active organisms, human pathogenic germs and could even be used to build up patient-specific tissue model for personalized medicine.}, subject = {Tissue Engineering}, language = {en} } @phdthesis{Schmidt2021, author = {Schmidt, Stefanie}, title = {Cartilage Tissue Engineering - Comparison of Articular Cartilage Progenitor Cells and Mesenchymal Stromal Cells in Agarose and Hyaluronic Acid-Based Hydrogels}, doi = {10.25972/OPUS-25171}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-251719}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {Articular cartilage damage caused by sports accidents, trauma or gradual wear and tear can lead to degeneration and the development of osteoarthritis because cartilage tissue has only limited capacity for intrinsic healing. Osteoarthritis causes reduction of mobility and chronic pain and is one of the leading causes of disability in the elderly population. Current clinical treatment options can reduce pain and restore mobility for some time, but the formed repair tissue has mostly inferior functionality compared to healthy articular cartilage and does not last long-term. Articular cartilage tissue engineering is a promising approach for the improvement of the quality of cartilage repair tissue and regeneration. In this thesis, a promising new cell type for articular cartilage tissue engineering, the so-called articular cartilage progenitor cell (ACPC), was investigated for the first time in the two different hydrogels agarose and HA-SH/P(AGE-co-G) in comparison to mesenchymal stromal cells (MSCs). In agarose, ACPCs´ and MSCs´ chondrogenic capacity was investigated under normoxic (21 \% oxygen) and hypoxic (2 \% oxygen) conditions in monoculture constructs and in zonally layered co-culture constructs with ACPCs in the upper layer and MSCs in the lower layer. In the newly developed hyaluronic acid (HA)-based hydrogel HA-SH/P(AGE-co-G), chondrogenesis of ACPCs and MSCs was also evaluated in monoculture constructs and in zonally layered co-culture constructs like in agarose hydrogel. Additionally, the contribution of the bioactive molecule hyaluronic acid to chondrogenic gene expression of MSCs was investigated in 2D monolayer, 3D pellet and HA-SH hydrogel culture. It was shown that both ACPCs and MSCs could chondrogenically differentiate in agarose and HA-SH/P(AGE-co-G) hydrogels. In agarose hydrogel, ACPCs produced a more articular cartilage-like tissue than MSCs that contained more glycosaminoglycan (GAG), less type I collagen and only little alkaline phosphatase (ALP) activity. Hypoxic conditions did not increase extracellular matrix (ECM) production of ACPCs and MSCs significantly but improved the quality of the neo-cartilage tissue produced by MSCs. The creation of zonal agarose constructs with ACPCs in the upper layer and MSCs in the lower layer led to an ECM production in zonal hydrogels that lay in general in between the ECM production of non-zonal ACPC and MSC hydrogels. Even though zonal co-culture of ACPCs and MSCs did not increase ECM production, the two cell types influenced each other and, for example, modulated the staining intensities of type II and type I collagen in comparison to non-zonal constructs under normoxic and hypoxic conditions. In HA-SH/P(AGE-co-G) hydrogel, MSCs produced more ECM than ACPCs, but the ECM was limited to the pericellular region for both cell types. Zonal HASH/P(AGE-co-G) hydrogels resulted in a native-like zonal distribution of ECM as MSCs in the lower zone produced more ECM than ACPCs in the upper zone. It appeared that chondrogenesis of ACPCs was supported by hydrogels without biological attachment sites such as agarose, and that chondrogenesis of MSCs benefited from hydrogels with biological cues like HA. As HA is an attractive material for cartilage tissue engineering, and the HA-based hydrogel HA-SH/P(AGE-co-G) appeared to be beneficial for MSC chondrogenic differentiation, the contribution of HA to chondrogenic gene expression of MSCs was investigated. An upregulation of chondrogenic gene expression was found in 2D monolayer and 3D pellet culture of MSCs in response to HA supplementation, while gene expression of osteogenic and adipogenic transcription factors was not upregulated. MSCs, encapsulated in a HA-based hydrogel, showed upregulation of gene expression for chondrogenic, osteogenic and adipogenic differentiation markers as well as for stemness markers. In a 3D bioprinting process, using the HA-based hydrogel, gene expression levels of MSCs mostly did not change. Nevertheless, expression of three tested genes (COL2A1, SOX2, CD168) was downregulated in printed in comparison to cast constructs, underscoring the importance of closely monitoring cellular behaviour during and after the printing process. In summary, it was confirmed that ACPCs are a promising cell source for articular cartilage engineering with advantages over MSCs when they were cultured in a suitable hydrogel like agarose. The performance of the cells was strongly dependent on the hydrogel environment they were cultured in. The different chondrogenic performance of ACPCs and MSCs in agarose and HA-SH/P(AGE-co-G) hydrogels highlighted the importance of choosing suitable hydrogels for the different cell types used in articular cartilage tissue engineering. Hydrogels with high polymer content, such as the investigated HA-SH/P(AGE-co-G) hydrogels, can limit ECM distribution to the pericellular area and should be developed further towards less polymer content, leading to more homogenous ECM distribution of the cultured cells. The influence of HA on chondrogenic gene expression and on the balance between differentiation and maintenance of stemness in MSCs was demonstrated. More studies should be performed in the future to further elucidate the signalling functions of HA and the effects of 3D bioprinting in HA-based hydrogels. Taken together, the results of this thesis expand the knowledge in the area of articular cartilage engineering with regard to the rational combination of cell types and hydrogel materials and open up new possible approaches to the regeneration of articular cartilage tissue.}, subject = {Hyaliner Knorpel}, language = {en} } @phdthesis{SchmidtgebSchmid2023, author = {Schmidt [geb. Schmid], Freia Florina}, title = {Ein dreidimensionales kutanes Melanommodell f{\"u}r den Einsatz in der pr{\"a}klinischen Testung}, doi = {10.25972/OPUS-32925}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-329255}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {Das maligne Melanom nimmt als Tumorerkrankung mit hoher Metastasierungsrate und steigenden Inzidenzraten bei h{\"o}chster Mortalit{\"a}t aller Hauttumoren eine zunehmende Bedeutung in der modernen Onkologie ein. Fr{\"u}hzeitige Diagnosem{\"o}glichkeiten und moderne Behandlungen konnten das {\"U}berleben der Patienten bereits erheblich verbessern. Jedoch besteht nach wie vor Bedarf an geeigneten Modellen, um die Melanomprogression vollst{\"a}ndig zu verstehen und neue wirksame Therapien zu entwickeln. Hierf{\"u}r werden h{\"a}ufig Tiermodelle verwendet, diese spiegeln jedoch nicht die menschliche Mikroumgebung wider. Zweidimensionalen Zellkulturen fehlen dagegen entscheidende Elemente der Tumormikroumgebung. Daher wurde in dieser Arbeit ein dreidimensionales epidermales Tumormodell des malignen Melanoms, welches aus prim{\"a}ren humanen Keratinozyten und verschiedenen Melanomzelllinien besteht, entwickelt. Die eingesetzten Melanomzelllinien variieren in ihren Treibermutationen, wodurch das Modell in der Lage ist, Wirkstoffe zu untersuchen, die spezifisch auf diese Mutationen wirken. Mit Techniken des Tissue Engineerings konnte ein dreidimensionales Hautmodell aufgebaut werden, das alle charakteristischen Schichten der Epidermis aufweist und im Bereich des stratum basale Melanomcluster ausbildet. Diese reichen je nach Gr{\"o}ße und Ausdehnung bis in suprabasale Epidermisschichten hinein. Die Tumor-Histopathologie, der Tumorstoffwechsel sowie tumorassoziierte Proteinsekretionen ließen sich im in vitro Modell nachweisen. Dar{\"u}ber hinaus konnte ein Protokoll entwickelt werden, mit dem einzelne Zellen aus den Modellen reisoliert werden k{\"o}nnen. Dies erm{\"o}glichte es, den Proliferationszustand innerhalb des jeweiligen Modells zu charakterisieren und die Wirkung von Antitumortherapien gezielt zu bewerten. Die Anwendbarkeit als Testsystem im Bereich der Tumortherapeutika wurde mit dem in der Klinik h{\"a}ufig verwendeten v-raf-Maus-Sarkom-Virus-Onkogen-Homolog B (BRAF)-Inhibitor Vemurafenib demonstriert. Der selektive BRAF-Inhibitor reduzierte erfolgreich das Tumorwachstum in den Modellen mit BRAF-mutierten Melanomzellen, was durch eine Verringerung der metabolischen Aktivit{\"a}t, der proliferierenden Zellen und des Glukoseverbrauchs gezeigt wurde. F{\"u}r die Implementierung des Modells in die pr{\"a}klinische Therapieentwicklung wurde B-B-Dimethylacrylshikonin, ein vielversprechender Wirkstoffkandidat, welcher einen Zellzyklusarrest mit anschließender Apoptose bewirkt, im Modell getestet. Bei einer Anwendung der Modelle im Bereich der Testung topischer Behandlungen ist eine Barrierefunktion der Modelle notwendig, die der in vivo Situation nahe kommt. Die Barriereeigenschaften der Haut{\"a}quivalente wurden durch die Melanomzellen nachweislich nicht beeinflusst, sind aber im Vergleich zur in vivo Situation noch unzureichend. Eine signifikante Steigerung der Hautbarriere konnte durch die Bereitstellung von Lipiden und die Anregung hauteigener Regenerationsprozesse erreicht werden. {\"U}ber den Nachweis des transepidermalen Wasserverlusts konnte eine Messmethode zur nicht-invasiven Bestimmung der Hautbarriere etabliert und {\"u}ber den Vergleich zur Impedanzspektroskopie validiert werden. Hierbei gelang es, erstmals die Korrelation der Hautmodelle zur in vivo Situation {\"u}ber ein solches Verfahren zu zeigen. Das entwickelte epidermale Modell konnte durch die Integration eines dermalen Anteils und einer Endothelzellschicht noch weiter an die komplexe Struktur und Physiologie der Haut angepasst werden um Untersuchungen, die mit der Metastierung und Invasion zusammenh{\"a}ngen, zu erm{\"o}glichen. Die artifizielle Dermis basiert auf einem Kollagen-Hydrogel mit prim{\"a}ren Fibroblasten. Eine dezellularisierte Schweinedarmmatrix ließ sich zur Erweiterung des Modells um eine Endothelzellschicht nutzen. Dabei wanderten die prim{\"a}ren Fibroblasten apikal in die nat{\"u}rliche Schweindarmmatrix ein, w{\"a}hrend die Endothelzellen basolateral eine geschlossene Schicht bildeten. Die in dieser Arbeit entwickelten Gewebemodelle sind in der Lage, die Vorhersagekraft der in vitro Modelle und die in vitro - in vivo Korrelation zu verbessern. Durch die Kombination des Melanommodells mit einer darauf abgestimmten Analytik wurde ein neuartiges Werkzeug f{\"u}r die pr{\"a}klinische Forschung zur Testung von pharmazeutischen Wirkstoffen geschaffen.}, subject = {Tissue Engineering}, language = {de} } @phdthesis{Schlesinger2024, author = {Schlesinger, Tobias}, title = {Autolog zellbesiedelte Matrix zum Verschluss gastraler Inzisionen: Eine Machbarkeitsstudie im Schweinemodell}, doi = {10.25972/OPUS-30583}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-305832}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2024}, abstract = {Einleitung: Strukturelle Defekte der gastrointestinalen Hohlorgane stellen ein allgegen-w{\"a}rtiges Problem im klinischen Alltag dar. Sie entstehen meist auf dem Boden einer ent-z{\"u}ndlichen oder tumor{\"o}sen Grunderkrankung und k{\"o}nnen außerdem traumatisch sowie durch medizinische Eingriffe hervorgerufen werden. In der Folge kommt es zur Kontami-nation des umliegenden Gewebes mit Magen- bzw. Darminhalt, wodurch delet{\"a}re Folgen wie eine systemische Infektion, also eine Sepsis mit Multiorganversagen drohen k{\"o}nnen. Vor diesem Hintergrund sind gastrointestinale Defekte immer als potenziell lebensbedroh-lich f{\"u}r den Patienten zu betrachten. Die ad{\"a}quate und kausale Behandlung erfolgt je nach {\"A}tiologie und Zustand des Patienten durch eine Operation oder eine endoskopische Inter-vention. Hierzu stehen zahlreiche etablierte, operative und interventionelle Therapieme-thoden zur Verf{\"u}gung. In manchen F{\"a}llen stoßen die etablierten Techniken jedoch an ihre Grenzen. Bei Patienten mit schwerwiegenden Komorbidit{\"a}ten oder im Rahmen neuer me-dizinischer Verfahren sind Innovationen gefragt. Die Grundidee der vorliegenden Arbeit ist die Entwicklung einer biotechnologischen Therapieoption zur Versorgung gastrointesti-naler Hohlorganperforationen. Methoden: Zur Durchf{\"u}hrung einer Machbarkeitsstudie wurden zehn G{\"o}ttinger Mi-nischweine in zwei Gruppen mit jeweils 5 Tieren aufgeteilt. Den Tieren der Experimental-gruppe wurden Hautbiopsien entnommen und daraus Fibroblasten isoliert, welche vo-r{\"u}bergehend konserviert wurden. Unter Verwendung von azellularisiertem Schweinedarm erfolgte die Herstellung von Implantaten nach den Prinzipien des Tissue Engineerings. Die Tiere beider Gruppen wurden einer Minilaparotomie und einer ca. 3cm-Inzision der Ma-genvorderwand unterzogen. Die anschließende Versorgung wurde in der Experimental-gruppe durch Implantation der neuartigen Konstrukte erzielt. In der Kontrollgruppe wur-de im Sinne des Goldstandards eine konventionelle Naht durchgef{\"u}hrt. Anschließend wurden die Tiere f{\"u}r vier Wochen beobachtet. Eine bzw. zwei Wochen nach dem pri-m{\"a}ren Eingriff wurde bei allen Tieren beider Gruppen eine Laparoskopie bzw. Gastrosko-pie durchgef{\"u}hrt. Am Ende der klinischen Observationsphase wurden die Versuchstiere get{\"o}tet und die entsprechenden Magenareale zur histologischen Untersuchung explantiert. Ergebnisse: Die Herstellung der Implantate konnte auf der Basis standardisierter zellbio-logischer Methoden problemlos etabliert werden. Alle Tiere beider Gruppen {\"u}berlebten den Prim{\"a}reingriff sowie das vierw{\"o}chige Nachbeobachtungsintervall und zeigten dabei keine klinischen Zeichen m{\"o}glicher Komplikationen. Die durchgef{\"u}hrten Laparoskopien und Gastroskopien ergaben bei keinem der Tiere Hinweise auf Leckagen oder lokale Infek-tionsprozesse. Die histologische Aufarbeitung zeigte im Bereich des urspr{\"u}nglichen De-fekts eine bindegewebige {\"U}berbr{\"u}ckung sowie ein beginnendes Remodeling der Magen-schleimhaut in beiden Gruppen. Schlussfolgerungen: Durch die Verkn{\"u}pfung von Einzelprozessen der Zellkultur und dem Großtier-OP konnte ein neues Verfahren zum Verschluss gastrointestinaler Defekt erfolgreich demonstriert und etabliert werden. Das Projekt konnte reibungslos durchge-f{\"u}hrt werden und lieferte Ergebnisse, die dem Goldstandard nicht unterlegen waren. Auf-grund der kleinen Fallzahl und weiterer methodischer Limitationen sind jedoch nur einge-schr{\"a}nkt Schlussfolgerungen m{\"o}glich, weshalb die Durchf{\"u}hrung gr{\"o}ßerer und gut geplan-ter Studien notwendig ist. Die Erkenntnisse dieser Pilotstudie liefern eine solide Basis f{\"u}r die Planung weiterf{\"u}hrender Untersuchungen.}, subject = {Magenkrankheit}, language = {de} } @phdthesis{Rossi2017, author = {Rossi, Angela Francesca}, title = {Development of functionalized electrospun fibers as biomimetic artificial basement membranes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137618}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {The basement membrane separates the epithelium from the stroma of any given barrier tissue and is essential in regulating cellular behavior, as mechanical barrier and as structural support. It further plays an important role for new tissue formation, homeostasis, and pathological processes, such as diabetes or cancer. Breakdown of the basement membrane is believed to be essential for tumor invasion and metastasization. Since the basement membrane is crucial for many body functions, the development of artificial basement membranes is indispensable for the ultimate formation of engineered functional tissue, however, challenging due to their complex structure. Electrospinning enables the production of fibers in the nano- or microscale range with morphological similarities to the randomly orientated collagen and elastic fibers in the basement membrane. However, electrospun fibers often lack the functional similarity to guide cells and maintain tissue-specific functions. Hence, their possible applications as matrix structure for tissue engineering are limited. Herein, the potential of polyester meshes, modified with six armed star-shaped pre-polymers and cell-adhesion-mediating peptides, was evaluated to act as functional isotropic and bipolar artificial basement membranes. Thereby, the meshes were shown to be biocompatible and stable including under dynamic conditions, and the degradation profile to correlate with the rate of new tissue formation. The different peptide sequences did not influence the morphology and integrity of the fibers. The modified membranes exhibited protein-repellent properties over 12 months, indicating the long-term stability of the cross-linked star-polymer surfaces. Cell culture experiments with primary fibroblasts and a human keratinocyte cell line (HaCaT) revealed that cell adhesion and growth strongly depends on the peptide sequences and their combinations employed. HaCaT cells grew to confluence on membranes modified with a combination of laminin/collagen type IV derived binding sequences and with a combination of fibronectin/laminin/collagen type IV derived peptide sequences. Fibroblasts strongly adhered to the fibronectin derived binding sequence and to membranes containing a combination of fibronectin/laminin/collagen type IV derived peptide sequences. The adhesion and growth of fibroblasts and HaCaT cells were significantly reduced on membranes modified with laminin, as well as collagen IV derived peptide sequences. HaCaT cells and fibroblasts barely adhered onto meshes without peptide sequences. Co-culture experiments at the air-liquid interface with fibroblasts and HaCaT cells confirmed the possibility of creating biocompatible, biofunctional and biomimetic isotropic and bipolar basement membranes, based on the functionalized fibers. HaCaT cells grew in several layers, differentiating towards the surface and expressing cytokeratin 10 in the suprabasal and cytokeratin 14 in the basal layers. Migration of fibroblasts into the electrospun membrane was shown by vimentin staining. Moreover, specific staining against laminin type V, collagen type I, III, IV and fibronectin illustrated that cells started to remodel the electrospun membrane and produced new extracellular matrix proteins following the adhesion to the synthetic surface structures. The culturing of primary human skin keratinocytes proved to be difficult on electrospun fibers. Cells attached to the membrane, but failed to form a multilayered, well-stratified, and keratinized epidermal layer. Changing the fiber composition and fixation methods did not promote tissue development. Further investigations of the membrane demonstrated the tremendous influence of the pore size of the membrane on epithelial formation. Furthermore, primary keratinocytes reacted more sensitive to pH changes in the medium than HaCaT cells did. Since primary keratinocytes did not adequately develop on the functionalized meshes, polycarbonate membranes were used instead of electrospun meshes to establish oral mucosa models. The tissue-engineered models represented important features of native human oral mucosa. They consisted of a multilayered epithelium with stratum basale, stratum spinosum, stratum granulosum, and stratum corneum. The models formed a physical barrier and the expression of characteristic cell markers was comparable with that in native human oral mucosa. The results from the ET-50 assay and the irritation study reflected the reproducibility of the tissue equivalents. Altogether, electrospinning enables the production of fibers with structural similarity to the basement membrane. Incorporating extracellular matrix components to mimic the functional composition offers a safe and promising way to modify the fibers so that they can be used for different tissue engineering applications. The resultant biomimetic membranes that can be functionalized with binding sequences derived from widely varying proteins can be used as a toolbox to study the influence of isotropic and bipolar basement membranes on tissue formation and matrix remodeling systematically, with regards to the biochemical composition and the influence and importance of mono- and co-culture. The oral mucosa models may be useful for toxicity and permeation studies, to monitor the irritation potential of oral health care products and biomaterials or as a disease model.}, subject = {Tissue Engineering}, language = {en} } @phdthesis{Reuter2023, author = {Reuter, Christian Steffen}, title = {Development of a tissue-engineered primary human skin infection model to study the pathogenesis of tsetse fly-transmitted African trypanosomes in mammalian skin}, doi = {10.25972/OPUS-25114}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-251147}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {Many arthropods such as mosquitoes, ticks, bugs, and flies are vectors for the transmission of pathogenic parasites, bacteria, and viruses. Among these, the unicellular parasite Trypanosoma brucei (T. brucei) causes human and animal African trypanosomiases and is transmitted to the vertebrate host by the tsetse fly. In the fly, the parasite goes through a complex developmental cycle in the alimentary tract and salivary glands ending with the cellular differentiation into the metacyclic life cycle stage. An infection in the mammalian host begins when the fly takes a bloodmeal, thereby depositing the metacyclic form into the dermal skin layer. Within the dermis, the cell cycle-arrested metacyclic forms are activated, re-enter the cell cycle, and differentiate into proliferative trypanosomes, prior to dissemination throughout the host. Although T. brucei has been studied for decades, very little is known about the early events in the skin prior to systemic dissemination. The precise timing and the mechanisms controlling differentiation of the parasite in the skin continue to be elusive, as does the characterization of the proliferative skin-residing trypanosomes. Understanding the first steps of an infection is crucial for developing novel strategies to prevent disease establishment and its progression. A major shortcoming in the study of human African trypanosomiasis is the lack of suitable infection models that authentically mimic disease progression. In addition, the production of infectious metacyclic parasites requires tsetse flies, which are challenging to keep. Thus, although animal models - typically murine - have produced many insights into the pathogenicity of trypanosomes in the mammalian host, they were usually infected by needle injection into the peritoneal cavity or tail vein, bypassing the skin as the first entry point. Furthermore, animal models are not always predictive for the infection outcome in human patients. In addition, the relatively small number of metacyclic parasites deposited by the tsetse flies makes them difficult to trace, isolate, and study in animal hosts. The focus of this thesis was to develop and validate a reconstructed human skin equivalent as an infection model to study the development of naturally-transmitted metacyclic parasites of T. brucei in mammalian skin. The first part of this work describes the development and characterization of a primary human skin equivalent with improved mechanical properties. To achieve this, a computer-assisted compression system was designed and established. This system allowed the improvement of the mechanical stability of twelve collagen-based dermal equivalents in parallel through plastic compression, as evaluated by rheology. The improved dermal equivalents provided the basis for the generation of the skin equivalents and reduced their contraction and weight loss during tissue formation, achieving a high degree of standardization and reproducibility. The skin equivalents were characterized using immunohistochemical and histological techniques and recapitulated key anatomical, cellular, and functional aspects of native human skin. Furthermore, their cellular heterogeneity was examined using single-cell RNA sequencing - an approach which led to the identification of a remarkable repertoire of extracellular matrix-associated genes expressed by different cell subpopulations in the artificial skin. In addition, experimental conditions were established to allow tsetse flies to naturally infect the skin equivalents with trypanosomes. In the second part of the project, the development of the trypanosomes in the artificial skin was investigated in detail. This included the establishment of methods to successfully isolate skin-dwelling trypanosomes to determine their protein synthesis rate, cell cycle and metabolic status, morphology, and transcriptome. Microscopy techniques to study trypanosome motility and migration in the skin were also optimized. Upon deposition in the artificial skin by feeding tsetse, the metacyclic parasites were rapidly activated and established a proliferative population within one day. This process was accompanied by: (I) reactivation of protein synthesis; (II) re-entry into the cell cycle; (III) change in morphology; (IV) increased motility. Furthermore, these observations were linked to potentially underlying developmental mechanisms by applying single-cell parasite RNA sequencing at five different timepoints post-infection. After the initial proliferative phase, the tsetse-transmitted trypanosomes appeared to enter a reversible quiescence program in the skin. These quiescent skin-residing trypanosomes were characterized by very slow replication, a strongly reduced metabolism, and a transcriptome markedly different from that of the deposited metacyclic forms and the early proliferative trypanosomes. By mimicking the migration from the skin to the bloodstream, the quiescent phenotype could be reversed and the parasites returned to an active proliferating state. Given that previous work has identified the skin as an anatomical reservoir for T. brucei during disease, it is reasonable to assume that the quiescence program is an authentic facet of the parasite's behavior in an infected host. In summary, this work demonstrates that primary human skin equivalents offer a new and promising way to study vector-borne parasites under close-to-natural conditions as an alternative to animal experimentation. By choosing the natural transmission route - the bite of an infected tsetse fly - the early events of trypanosome infection have been detailed with unprecedented resolution. In addition, the evidence here for a quiescent, skin-residing trypanosome population may explain the persistence of T. brucei in the skin of aparasitemic and asymptomatic individuals. This could play an important role in maintaining an infection over long time periods.}, subject = {Trypanosoma brucei}, language = {en} } @phdthesis{Nelke2019, author = {Nelke, Lena}, title = {Establishment and optimization of 3-dimensional mamma carcinoma models for therapy simulation and drug testing}, doi = {10.25972/OPUS-17228}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-172280}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Breast cancer is the most common cancer among women worldwide and the second most common cause of cancer death in the developed countries. As the current state of the art in first-line drug screenings is highly ineffective, there is an urgent need for novel test systems that allow for reliable predictions of drug sensitivity. In this study, a tissue engineering approach was used to successfully establish and standardize a 3-dimensional (3D) mamma carcinoma test system that was optimized for the testing of anti-tumour therapies as well as for the investigation of tumour biological issues. This 3D test system is based on the decellularised scaffold of a porcine small intestinal segment and represents the three molecular subsets of oestrogen receptor-positive, HER2/Neu-overexpressing and triple negative breast cancer (TNBC). The characterization of the test system with respect to morphology as well as the expression of markers for epithelial-mesenchymal transition (EMT) and differentiation indicate that the 3D tumour models cultured under static and dynamic conditions reflect tumour relevant features and have a good correlation with in vivo tumour tissue from the corresponding xenograft models. In this respect, the dynamic culture in a flow bioreactor resulted in the generation of tumour models that exhibited best reflection of the morphology of the xenograft material. Furthermore, the proliferation indices of 3D models were significantly reduced compared to 2-dimensional (2D) cell culture and therefore better reflect the in vivo situation. As this more physiological proliferation index prevents an overestimation of the therapeutic effect of cytostatic compounds, this is a crucial advantage of the test system compared to 2D culture. Moreover, it could be shown that the 3D models can recapitulate different tumour stages with respect to tumour cell invasion. The scaffold SISmuc with the preserved basement membrane structure allowed the investigation of invasion over this barrier which tumour cells of epithelial origin have to cross in in vivo conditions during the process of metastasis formation. Additionally, the data obtained from ultrastructural analysis and in situ zymography indicate that the invasion observed is connected to a tumour cell-associated change in the basement membrane in which matrix metalloproteinases (MMPs) are also involved. This features of the model in combination with the mentioned methods of analysis could be used in the future to mechanistically investigate invasive processes and to test anti-metastatic therapy strategies. The validation of the 3D models as a test system with respect to the predictability of therapeutic effects was achieved by the clinically relevant targeted therapy with the monoclonal antibody trastuzumab which induces therapeutic response only in patients with HER2/Neu-overexpressing mamma carcinomas due to its specificity for HER2. While neither in 2D nor in 3D models of all molecular subsets a clear reduction of cell viability or an increase in apoptosis could be observed, a distinct increase in antibody-dependent cell-mediated cytotoxicity (ADCC) was detected only in the HER2/NEU-overexpressing 3D model with the help of an ADCC reporter gene assay that had been adapted for the application in the 3D model in the here presented work. This correlates with the clinical observations and underlines the relevance of ADCC as a mechanism of action (MOA) of trastuzumab. In order to measure the effects of ADCC on the tumour cells in a direct way without the indirect measurement via a reporter gene, the introduction of an immunological component into the models was required. This was achieved by the integration of peripheral blood mononuclear cells (PBMCs), thereby allowing the measurement of the induction of tumour cell apoptosis in the HER2/Neu-overexpressing model. Hence, in this study an immunocompetent model could be established that holds the potential for further testing of therapies from the emergent field of cancer immunotherapies. Subsequently, the established test system was used for the investigation of scientific issues from different areas of application. By the comparison of the sensitivity of the 2D and 3D model of TNBC towards the water-insoluble compound curcumin that was applied in a novel nanoformulation or in a DMSO-based formulation, the 3D test system was successfully applied for the evaluation of an innovative formulation strategy for poorly soluble drugs in order to achieve cancer therapy-relevant concentrations. Moreover, due to the lack of targeted therapies for TNBC, the TNBC model was applied for testing novel treatment strategies. On the one hand, therapy with the WEE1 kinase inhibitor MK 1775 was evaluated as a single agent as well as in combination with the chemotherapeutic agent doxorubicin. This therapy approach did not reveal any distinct benefits in the 3D test system in contrast to testing in 2D culture. On the other hand, a novel therapy approach from the field of cellular immunotherapies was successfully applied in the TNBC 3D model. The treatment with T cells that express a chimeric antigen receptor (CAR) against ROR1 revealed in the static as well as in the dynamic model a migration of T cells into the tumour tissue, an enhanced proliferation of T cells as well as an efficient lysis of the tumour cells via apoptosis and therefore a specific anti-cancer effect of CAR-transduced T cells compared to control T cells. These results illustrate that the therapeutic application of CAR T cells is a promising strategy for the treatment of solid tumours like TNBC and that the here presented 3D models are suitable for the evaluation and optimization of cellular immunotherapies. In the last part of this work, the 3D models were expanded by components of the tumour stroma for future applications. By coculture with fibroblasts, the natural structures of the intestinal scaffold comprising crypts and villi were remodelled and the tumour cells formed tumour-like structures together with the fibroblasts. This tissue model displayed a strong correlation with xenograft models with respect to morphology, marker expression as well as the activation of dermal fibroblasts towards a cancer-associated fibroblast (CAF) phenotype. For the integration of adipocytes which are an essential component of the breast stroma, a coculture with human adipose-derived stromal/stem cells (hASCs) which could be successfully differentiated along the adipose lineage in 3D static as well as dynamic models was established. These models are suitable especially for the mechanistic analysis of the reciprocal interaction between tumour cells and adipocytes due to the complex differentiation process. Taken together, in this study a human 3D mamma carcinoma test system for application in the preclinical development and testing of anti-tumour therapies as well as in basic research in the field of tumour biology was successfully established. With the help of this modular test system, relevant data can be obtained concerning the efficacy of therapies in tumours of different molecular subsets and different tumour stages as well as for the optimization of novel therapy strategies like immunotherapies. In the future this can contribute to improve the preclinical screening and thereby to reduce the high attrition rates in pharmaceutical industry as well as the amount of animal experiments.}, subject = {Brustkrebs}, language = {en} } @phdthesis{Massih2024, author = {Massih, Bita}, title = {Human stem cell-based models to analyze the pathophysiology of motor neuron diseases}, publisher = {Frontiers in Cell and Developmental Biology}, doi = {10.25972/OPUS-34637}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-346374}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2024}, abstract = {Motor neuron diseases (MNDs) encompass a variety of clinically and genetically heterogeneous disorders, which lead to the degeneration of motor neurons (MNs) and impaired motor functions. MNs coordinate and control movement by transmitting their signal to a target muscle cell. The synaptic endings of the MN axon and the contact site of the muscle cell thereby form the presynaptic and postsynaptic structures of the neuromuscular junction (NMJ). In MNDs, synaptic dysfunction and synapse elimination precede MN loss suggesting that the NMJ is an early target in the pathophysiological cascade leading to MN death. In this study, we established new experimental strategies to analyze human MNDs by patient derived induced pluripotent stem cells (iPSCs) and investigated pathophysiological mechanisms in two different MNDs. To study human MNDs, specialized cell culture systems that enable the connection of MNs to their target muscle cells are required to allow the formation of NMJs. In the first part of this study, we established and validated a human neuromuscular co-culture system consisting of iPSC derived MNs and 3D skeletal muscle tissue derived from myoblasts. We generated 3D muscle tissue by culturing primary myoblasts in a defined extracellular matrix in self-microfabricated silicone dishes that support the 3D tissue formation. Subsequently, iPSCs from healthy donors and iPSCs from patients with the progressive MND Amyotrophic Lateral Sclerosis (ALS) were differentiated into MNs and used for 3D neuromuscular co-cultures. Using a combination of immunohistochemistry, calcium imaging, and pharmacological stimulations, we characterized and confirmed the functionality of the 3D muscle tissue and the 3D neuromuscular co-cultures. Finally, we applied this system as an in vitro model to study the pathophysiology of ALS and found a decrease in neuromuscular coupling, muscle contraction, and axonal outgrowth in co-cultures with MNs harboring ALS-linked superoxide dismutase 1 (SOD1) mutation. In summary, this co-culture system presents a human model for MNDs that can recapitulate aspects of ALS pathophysiology. In the second part of this study, we identified an impaired unconventional protein secretion (UPS) of Sod1 as pathological mechanisms in Pleckstrin homology domain-containing family G member 5 (Plekhg5)-associated MND. Sod1 is a leaderless cytosolic protein which is secreted in an autophagy-dependent manner. We found that Plekhg5 depletion in primary MNs and NSC34 cells leads to an impaired secretion of wildtype Sod1, indicating that Plekhg5 drives the UPS of Sod1 in vitro. By interfering with different steps during the biogenesis of autophagosomes, we could show that Plekhg5-regulated Sod1 secretion is determined by autophagy. To analyze our findings in a clinically more relevant model we utilized human iPSC MNs from healthy donors and ALS patients with SOD1 mutations. We observed reduced SOD1 secretion in ALS MNs which coincides with reduced protein expression of PLEKHG5 compared to healthy and isogenic control MNs. To confirm this correlation, we depleted PLEKHG5 in control MNs and found reduced extracellular SOD1 levels, implying that SOD1 secretion depends on PLEKHG5. In summary, we found that Plekh5 regulates the UPS of Sod1 in mouse and human MNs and that Sod1 secretion occurs in an autophagy dependent manner. Our data shows an unreported mechanistic link between two MND-associated proteins.}, subject = {Tissue Engineering}, language = {en} } @phdthesis{Malkmus2023, author = {Malkmus, Christoph}, title = {Establishment of a 3D \(in\) \(vitro\) skin culture system for the obligatory human parasite \(Onchocerca\) \(volvulus\)}, doi = {10.25972/OPUS-31717}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-317171}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {Onchocerciasis, the world's second-leading infectious cause of blindness in humans -prevalent in Sub-Saharan Africa - is caused by Onchocerca volvulus (O. volvulus), an obligatory human parasitic filarial worm. Commonly known as river blindness, onchocerciasis is being targeted for elimination through ivermectin-based mass drug administration programs. However, ivermectin does not kill adult parasites, which can live and reproduce for more than 15 years within the human host. These impediments heighten the need for a deeper understanding of parasite biology and parasite-human host interactions, coupled with research into the development of new tools - macrofilaricidal drugs, diagnostics, and vaccines. Humans are the only definitive host for O. volvulus. Hence, no small-animal models exist for propagating the full life cycle of O. volvulus, so the adult parasites must be obtained surgically from subcutaneous nodules. A two-dimensional (2D) culture system allows that O. volvulus larvae develop from the vector-derived infective stage larvae (L3) in vitro to the early pre-adult L5 stages. As problematic, the in vitro development of O. volvulus to adult worms has so far proved infeasible. We hypothesized that an increased biological complexity of a three-dimensional (3D) culture system will support the development of O. volvulus larvae in vitro. Thus, we aimed to translate crucial factors of the in vivo environment of the developing worms into a culture system based on human skin. The proposed tissue model should contain 1. skinspecific extracellular matrix, 2. skin-specific cells, and 3. enable a direct contact of larvae and tissue components. For the achievement, a novel adipose tissue model was developed and integrated to a multilayered skin tissue comprised of epidermis, dermis and subcutis. Challenges of the direct culture within a 3D tissue model hindered the application of the three-layered skin tissue. However, the indirect coculture of larvae and skin models supported the growth of fourth stage (L4) larvae in vitro. The direct culture of L4 and adipose tissue strongly improved the larvae survival. Furthermore, the results revealed important cues that might represent the initial encapsulation of the developing worm within nodular tissue. These results demonstrate that tissue engineered 3D tissues represent an appropriate in vitro environment for the maintenance and examination of O. volvulus larvae.}, subject = {Tissue Engineering}, language = {en} } @phdthesis{Lotz2019, author = {Lotz, Christian}, title = {Entwicklung eines Augenirritationstests zur Identifikation aller GHS-Kategorien f{\"u}r den Endpunkt Augenreizung}, doi = {10.25972/OPUS-17012}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-170126}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Die Risikobewertung von Chemikalien ist f{\"u}r die {\"o}ffentliche Gesundheit von entschei-dender Bedeutung, weshalb strenge Testverfahren zu deren toxikologischer Begutach-tung angewandt werden. Die urspr{\"u}nglich tierbasierten Testverfahren werden aufgrund von neuen wissenschaftlichen Erkenntnissen und wegen {\"o}konomischer Ineffizienz sowie ethischer Fragw{\"u}rdigkeit immer mehr durch alternative Methoden ohne Tiermodelle ersetzt. F{\"u}r den toxikologischen Endpunkt der Augenreizung wurden bereits die ersten alternativen Testsysteme auf der Basis von ex vivo- oder in vitro-Modellen entwickelt. Jedoch ist bis dato kein alternatives Testsystem in der Lage, das gesamte Spektrum der verschiedenen Kategorien der Augenreizungen nach dem global harmonisierten System zur Einstufung und Kennzeichnung von Chemikalien (GHS) vorherzusagen und damit den tierbasierten Draize-Augenreizungstest vollends zu ersetzen. Gr{\"u}nde hierf{\"u}r sind fehlende physiologische Merkmale im Modell sowie eine destruktive Analysemethode. Aufgrund dessen wurden in dieser Studie die Hypothesen getestet, ob ein verbessertes In-vitro-Modell oder eine zerst{\"o}rungsfreie, hochsensitive Analysemethode die Vorher-sagekraft des Augenreizungstests verbessern k{\"o}nnen. Daf{\"u}r wurden zun{\"a}chst neue Mo-delle aus humanen Hornhaut- und Hautepithelzellen entwickelt. Die Modelle aus pri-m{\"a}ren cornealen Zellen zeigten eine gewebespezifische Expression der Marker Zytokera-tin 3 und 12 sowie Loricrin. In beiden Modellen konnte durch die Verk{\"u}rzung der Kul-turdauer die Ausbildung einer Hornschicht verhindert werden. Die Modelle wiesen dadurch eine sensiblere Barriere vergleichbar der nativen Cornea auf. Dar{\"u}ber hinaus konnte durch die chemische Quervernetzung mit Polyethylenglykolsuccinimidylglutara-tester ein transparentes, nicht kontrahierendes Stroma-{\"A}quivalent etabliert werden. Der Stroma-Ersatz konnte zur Generierung von Hemi- und Voll-Cornea-{\"A}quivalenten einge-setzt werden und lieferte somit erste Ansatzpunkte f{\"u}r die Rekonstruktion der nativen Hornhaut. Parallel dazu konnte ein zerst{\"o}rungsfreies Analyseverfahren basierend auf der Impe-danzspektroskopie entwickelt werden, das wiederholte Messungen der Gewebeintegri-t{\"a}t zul{\"a}sst. Zur verbesserten Messung der Barriere in dreidimensionalen Modelle wurde hierf{\"u}r ein neuer Parameter, der transepitheliale elektrische Widerstand (TEER) bei der Frequenz von 1000 Hz, der TEER1000 Hz definiert, der eine genauere Aussage {\"u}ber die Integrit{\"a}t der Modelle zul{\"a}sst. Durch die Kombination der entwickelten cornealen Epithelzellmodelle mit der TEER1000 Hz-Messung konnte die Pr{\"a}dikitivit{\"a}t des Augenrei-zungstests auf 78 - 100 \% erh{\"o}ht werden. Von besonderer Bedeutung ist dabei, dass die nicht destruktive Messung des TEER1000 Hz zum ersten Mal erlaubte, die Persistenz von Irritationen durch wiederholte Messungen in einem in vitro-Modell zu erkennen und somit die GHS-Kategorie 1 von GHS-Kategorie 2 zu unterscheiden. Der wissenschaftli-che Gewinn dieser Forschungsarbeit ist ein neues Testverfahren, das alle GHS-Kategorien in einem einzigen in vitro-Test nachweisen und den Draize-Augenreizungstest g{\"a}nzlich ersetzen kann.}, subject = {Tissue Engineering}, language = {de} } @phdthesis{Lodes2021, author = {Lodes, Nina Theresa}, title = {Tissue Engineering f{\"u}r seltene Erkrankungen mit St{\"o}rungen des mukozili{\"a}ren Transports}, doi = {10.25972/OPUS-20017}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-200178}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {Bei der zystischen Fibrose (CF) sowie der prim{\"a}ren Ziliendyskinesie (PCD) handelt es sich um zwei seltene Erkrankungen, die unter anderem den mukozili{\"a}ren Transport beeintr{\"a}chtigen. CF geh{\"o}rt hierbei zu den am h{\"a}ufigsten vorkommenden angeborenen Stoffwechselerkrankungen, wobei Betroffene unter einem Defekt des Cystic Fibrosis Transmembrane Conductor Regulator (CFTR)-Gens leiden, der durch die Produktion von hochviskosem Sekret in muzinproduzierenden Organen, wie dem gastrointestinalen Trakt und der Lunge, gekennzeichnet ist. Patienten, die an PCD leiden, weisen Defekte in, zum jetzigen Zeitpunkt, ca. 38 bekannten und PCD-assoziierten Genen auf, die in strukturellen Defekten des zili{\"a}ren Apparats und somit in dysfunktionalen Kinozilien resultieren. Da aktuell weder f{\"u}r die CF noch f{\"u}r die PCD eine Heilung m{\"o}glich ist, steht bei der Therapie vor allem die Linderung der Symptome im Fokus. Grundlegendes Ziel ist der langfristige Erhalt der Lungenfunktion sowie die Pr{\"a}vention bakterieller Infekte. Als bisherige Modellsysteme zur Erforschung m{\"o}glicher Therapeutika gelten Tiermodelle, die den humanen Ph{\"a}notyp aufgrund von Speziesdiversit{\"a}t nicht vollst{\"a}ndig abbilden k{\"o}nnen. Als vielversprechende Testsysteme f{\"u}r die zystische Fibrose gelten humane intestinale Organoidkulturen. Nachdem allerdings vorwiegend respiratorische Symptome f{\"u}r die Mortalit{\"a}t der Patienten verantwortlich sind, stellen CF-Atemwegsmodelle bessere Testsysteme f{\"u}r zuk{\"u}nftige Therapeutika dar. Atmungsorganoidkulturen wurden verwendet, um die CFTR-Funktionalit{\"a}t zu untersuchen, repr{\"a}sentieren aber nicht vollst{\"a}ndig die in vivo Situation. Deshalb werden zur Entwicklung neuer Therapiestrategien patientenspezifische 3D in vitro Testsysteme der humanen Atemwege ben{\"o}tigt, die insbesondere im Hinblick auf personalisierte Medizin ihren Einsatz finden. In der vorliegenden Arbeit wurde eine f{\"u}r den Lehrstuhl neue Methode zur Zellgewinnung aus nasalen Schleimhautabstrichen etabliert, die eine standardisierte Versorgung mit humanem Prim{\"a}rmaterial garantiert. Zur Generierung einer krankheitsspezifischen Zelllinie, wie beispielsweise einer PCD-Zelllinie mit Hilfe des CRISPR/Cas9-Systems, ist eine Atemwegszelllinie erforderlich, die die in vivo Situation vollst{\"a}ndig repr{\"a}sentiert. So wurden vier verschiedene respiratorische Epithelzelllinien (HBEC3-KT, Calu-3, VA10 und Cl-huAEC) auf ihren mukozili{\"a}ren Ph{\"a}notyp hin untersucht, wobei lediglich die Zelllinie HBEC3-KT in zilientragende Zellen differenzierte. Diese zeigten jedoch nur auf ca. 5 \% der Modelloberfl{\"a}che Kinozilien, wodurch die humane respiratorische Mukosa nicht komplett abgebildet werden konnte und die HBEC3-KT-Zelllinie keine geeignete Zelllinie zur Generierung einer PCD-Zelllinie darstellte. Mit Hilfe des Tissue Engineering war es m{\"o}glich, 3D in vitro Testsysteme basierend auf zwei unterschiedlichen Matrices, der biologischen SIS (small intestinal submucosa) und der synthetischen Polyethylenterephthalat (PET)-Membran, aufzubauen. Es wurden 3D Atemwegstestsysteme mit humanen prim{\"a}ren nasalen und tracheobronchialen Epithelzellen generiert. Erg{\"a}nzend zu histologischen Untersuchungen und zur Charakterisierung spezifischer Marker des respiratorischen Systems mittels Immunfluoreszenz, wurde die Ultrastruktur der Modelle, mit speziellem Fokus auf zili{\"a}re Strukturen, analysiert. Um R{\"u}ckschl{\"u}sse auf die zili{\"a}re Funktionalit{\"a}t ziehen zu k{\"o}nnen und somit eine hohe in vivo Korrelation zu best{\"a}tigen, wurde im Rahmen dieser Arbeit am Lehrstuhl f{\"u}r Tissue Engineering und Regenerative Medizin die Methode der Hochgeschwindigkeitsvideomikroskopie etabliert, welche die Analyse der Zilienschlagfrequenz sowie des mukozili{\"a}ren Transports erm{\"o}glicht. Ebenfalls wurde der Einfluss von isotoner Kochsalzl{\"o}sung und des � 2-adrenergen Agonisten Salbutamol, das vor allem als Bronchodilatator bei Asthmapatienten eingesetzt wird, auf die Zilienschlagfrequenz analysiert. Es konnte gezeigt werden, dass beide Substanzen den Zilienschlag im Atemwegsmodell erh{\"o}hen. Zur Generierung der Testsysteme der beiden seltenen Erkrankungen CF und PCD wurden Epithelzellen der betroffenen Patienten zun{\"a}chst mittels nicht-invasiver Raman-Spektroskopie auf einen potentiellen Biomarker untersucht, welcher Einsatz in der Diagnostik der beiden Krankheiten finden k{\"o}nnte. Es konnte jedoch weder f{\"u}r die CF noch f{\"u}r die PCD ein Biomarker aufgedeckt werden. Jedoch zeigten PCD-Zellen eine geringe Auftrennung gegen{\"u}ber nicht-PCD Zellen. Anschließend wurden 3D-Atemwegstestsysteme basierend auf Patientenzellen aufgebaut. Der Ph{\"a}notyp der CF-Modelle wurde mittels immunhistologischer F{\"a}rbung und der Analyse des gest{\"o}rten mukozili{\"a}ren Transports verifiziert. Strukturelle zili{\"a}re Defekte konnten durch die ultrastrukturelle Analyse von Zilienquerschnitten in drei donorspezifischen PCD-Modellen identifiziert werden. Dar{\"u}ber hinaus konnte die zili{\"a}re Funktionalit{\"a}t mit Hilfe der Hochgeschwindigkeitsvideomikroskopie nicht nachgewiesen werden. Zusammenfassend ist es in dieser Arbeit gelungen, eine neue Methode zur vollst{\"a}ndigen Charakterisierung von 3D-Atemwegstestsystemen zu etablieren, die die Analyse der Zilienschlagfrequenz sowie des mukozili{\"a}ren Transports erm{\"o}glicht. Es konnte erstmalig gezeigt werden, dass mit Hilfe des Tissue Engineering ein personalisiertes Krankheitsmodell f{\"u}r die PCD auf Segmenten eines dezellularisierten porzinen Jejunums generiert werden kann, das zuk{\"u}nftig ein Testsystem f{\"u}r potentielle Therapeutika darstellen kann.}, subject = {In-vitro-Kultur}, language = {de} } @phdthesis{Lennartz2018, author = {Lennartz, Simon}, title = {Tissue Engineering der menschlichen Speicheldr{\"u}se unter Verwendung von Epithel- und mikrovaskul{\"a}ren Endothelzellen auf einer Matrix aus dezellularisiertem Schweinedarm}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-164116}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {Eine ausgepr{\"a}gte Mundtrockenheit, Xerostomie, entsteht h{\"a}ufig durch eine irreversible Funktionseinschr{\"a}nkung der Speicheldr{\"u}sen. Diese ist unter anderem durch die Einnahme bestimmter Medikamente, Autoimmunerkrankungen, fortgeschrittenes Alter oder die Bestrahlungstherapie von Tumoren der Kopf-Hals-Region bedingt, wobei letztere eine der h{\"a}ufigsten Ursachen darstellt. Konsequenzen der eingeschr{\"a}nkten Dr{\"u}senfunktion sind herabgesetzte Speichelflussraten, eine Reduktion des Mund-pH-Werts, eine ver{\"a}nderte Elektrolyt- und Immunglobulin-Zusammensetzung des Speichels und somit eine Verringerung des Infektionsschutzes. Die resultierenden Komplikationen erstrecken sich von Karies und rezidivierenden Infektionen bis hin zu Pilzbesiedelungen der Mundschleimhaut. Diese schr{\"a}nken die Lebensqualit{\"a}t der Patienten stark ein und f{\"u}hren h{\"a}ufig zu Therapieunterbrechungen. Fast die H{\"a}lfte der Patienten leidet unter Depressionen oder psychischen Belastungszust{\"a}nden. Es gibt wenige Therapieans{\"a}tze zur Behandlung der postradiogenen Xerostomie: Pilocarpin erh{\"o}ht zwar die Speichelflussraten, hat jedoch keinen signifikanten Effekt auf die Lebensqualit{\"a}t. Die operative Translokation der Glandula submandibularis hat den Weg in die klinische Routine noch nicht gefunden, w{\"a}hrend die intensit{\"a}tsmodulierte Bestrahlung (IMRT) nicht f{\"u}r jeden Patienten geeignet ist; beide zeigen jedoch einen positiven Effekt auf die Lebensqualit{\"a}t. Gentechnische und stammzellbasierte Ans{\"a}tze zur Regeneration des Dr{\"u}sengewebes befinden sich im Experimentalstadium. Somit ergibt sich ein dringender Bedarf an innovativen Optionen zur Behandlung der postradiogenen Xerostomie. Das Tissue Engineering, die Erstellung einer k{\"u}nstlichen Speicheldr{\"u}se aus k{\"o}rpereigenen Zellen, b{\"o}te hier ein potentielles Behandlungskonzept. Diese Studie soll deshalb untersuchen, ob humane Speicheldr{\"u}senepithelzellen (hSEZ) auf einer Matrix aus dezellularisiertem, porzinem Jejunum, der sogenannten Small intestinal submucosa + mucosa (SIS-muc), kultiviert werden k{\"o}nnen. K{\"o}nnen die Zellen innerhalb der Wachstumsperiode wichtige physiologische Differenzierungsmarker beibehalten? Kann die Produktion von α-Amylase, einem der wichtigsten Enzyme des menschlichen Speichels, erhalten werden? Welchen Einfluss hat die Kokultur mit mikrovaskul{\"a}ren Endothelzellen (mvEZ)? Und zuletzt: Ist dezellularisierter Schweinedarm eine potentiell geeignete Matrix f{\"u}r das Tissue Engineering der menschlichen Speicheldr{\"u}se? Zun{\"a}chst erfolgte die Entnahme von humanem Speicheldr{\"u}sengewebe, woraus hSEZ isoliert wurden. Diese wurden dann sowohl in Mono- als auch in Kokultur mit mvEZ auf die SIS-muc aufgebracht und auf dieser kultiviert. Die SIS-muc wurde aus kurzen Schweinedarm-Segmenten gewonnen, die in einem mehrstufigen Verfahren dezellularisiert wurden. Die besiedelte SIS-muc wurde mittels konventioneller sowie Immunfluoreszenzf{\"a}rbungen, Raster- und Transmissionsektronenmikroskopie (REM/TEM) sowie quantitativer Polymerasekettenreaktion (qPCR) untersucht, dar{\"u}ber hinaus erfolgte die Messung der α-Amylase-Enzymaktivit{\"a}t. Histologisch sowie in der REM zeigte sich sowohl in der Mono- als auch in der Kokultur eine konfluente Besiedelung der SIS-muc mit hSEZ. In der Kokultur formten mvEZ einen Monolayer auf der serosalen Matrixseite. Bei der Charakterisierung der hSEZ zeigte sich in den Immunfluoreszenzaufnahmen eine starke Auspr{\"a}gung von Zytokeratin, α-Amylase und Aquaporin-5 und eine moderate Auspr{\"a}gung von Claudin-1. Bei der Untersuchung der Funktion der α-Amylase konnte in der Kokultur von hSEZ mit mvEZ eine im Gegensatz zur Mono- und 2D-Kultur signifikant erh{\"o}hte Enzymaktivit{\"a}t der α-Amylase nachgewiesen werden. In der qPCR-Analyse der α-Amylase-Genexpression war die 3D-Kultur der 2D-Kultur {\"u}berlegen. Die vorliegende Arbeit zeigt, dass die Kultur von hSEZ auf der SIS-muc m{\"o}glich ist. Es konnte nachgewiesen werden, dass die Zellen in 3D-Kultur spezifische Differenzierungsmerkmale beibehalten, die in der 2D-Kultur teils verloren gehen und dass hSEZ in Kokultur mit mvEZ eine gegen{\"u}ber der Monokultur signifikant erh{\"o}hte Produktion von α-Amylase aufweisen. Diese Arbeit liefert die Datengrundlage f{\"u}r zuk{\"u}nftige Studien im dynamischen Bioreaktor-Modell (BioVaSc), die auf dem Weg zur klinischen Translation notwendig sind. Somit stellt sie einen wichtigen Schritt in Richtung einer auf Tissue Engineering basierten Therapie der belastenden Xerostomie dar.}, subject = {Tissue Engineering}, language = {de} } @phdthesis{Leikeim2022, author = {Leikeim, Anna}, title = {Vascularization Strategies for Full-Thickness Skin Equivalents to Model Melanoma Progression}, doi = {10.25972/OPUS-27295}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-272956}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {Malignant melanoma (MM) is the most dangerous type of skin cancer with rising incidences worldwide. Melanoma skin models can help to elucidate its causes and formation or to develop new treatment strategies. However, most of the current skin models lack a vasculature, limiting their functionality and applicability. MM relies on the vascular system for its own supply and for its dissemination to distant body sites via lymphatic and blood vessels. Thus, to accurately study MM progression, a functional vasculature is indispensable. To date, there are no vascularized skin models to study melanoma metastasis in vitro, which is why such studies still rely on animal experimentation. In the present thesis, two different approaches for the vascularization of skin models are employed with the aim to establish a vascularized 3D in vitro full-thickness skin equivalent (FTSE) that can serve as a test system for the investigation of the progression of MM. Initially, endothelial cells were incorporated in the dermal part of FTSEs. The optimal seeding density, a spheroid conformation of the cells and the cell culture medium were tested. A high cell density resulted in the formation of lumen-forming shapes distributed in the dermal part of the model. These capillary-like structures were proven to be of endothelial origin by staining for the endothelial cell marker CD31. The established vascularized FTSE (vFTSE) was characterized histologically after 4 weeks of culture, revealing an architecture similar to human skin in vivo with a stratified epidermis, separated from the dermal equivalent by a basement membrane indicated by collagen type IV. However, this random capillary-like network is not functional as it cannot be perfused. Therefore, the second vascularization approach focused on the generation of a perfusable tissue construct. A channel was molded within a collagen hydrogel and seeded with endothelial cells to mimic a central, perfusable vessel. The generation and the perfusion culture of the collagen hydrogel was enabled by the use of two custom-made, 3D printed bioreactors. Histological assessment of the hydrogels revealed the lining of the channel with a monolayer of endothelial cells, expressing the cell specific marker CD31. For the investigation of MM progression in vitro, a 3D melanoma skin equivalent was established. Melanoma cells were incorporated in the epidermal part of FTSEs, representing the native microenvironment of the tumor. Melanoma nests grew at the dermo-epidermal junction within the well stratified epidermis and were characterized by the expression of common melanoma markers. First experiments were conducted showing the feasibility of combining the melanoma model with the vFTSE, resulting in skin models with tumors at the dermo-epidermal junction and lumen-like structures in the dermis. Taken together, the models presented in this thesis provide further steps towards the establishment of a vascularized, perfusable melanoma model to study melanoma progression and metastasis.}, subject = {Tissue Engineering}, language = {en} } @phdthesis{Kremer2019, author = {Kremer, Antje}, title = {Tissue Engineering of a Vascularized Meniscus Implant}, doi = {10.25972/OPUS-18432}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-184326}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {The knee joint is a complex composite joint containing the C-shaped wedge-like menisci composed of fibrocartilage. Due to their complex composition and structure, they provide mechanical resilience to the knee joint protecting the articular cartilage. Because of the limited repair potential, meniscal injuries do not only affect the meniscus itself but also lead to altered joint homeostasis and inevitably to secondary osteoarthritis. The meniscus was characterized focusing on its anatomy, structure and meniscal markers such as aggrecan, collagen type I (Col I) and Col II. The components relevant for meniscus tissue engineering, namely cells, Col I scaffolds, biochemical and biomechanical stimuli were studied. Meniscal cells (MCs) were isolated from meniscus, mesenchymal stem cells (MSCs) from bone marrow and dermal microvascular endothelial cells (d-mvECs) from foreskin biopsies. For the human (h) meniscus model, wedge-shape compression of a hMSC-laden Col I gel was successfully established. During three weeks of static culture, the biochemical stimulus transforming growth factor beta-3 (TGF beta-3) led to a compact collagen structure. On day 21, this meniscus model showed high metabolic activity and matrix remodeling as confirmed by matrix metalloproteinases detection. The fibrochondrogenic properties were illustrated by immunohistochemical detection of meniscal markers, significant GAG/DNA increase and increased compressive properties. For further improvement, biomechanical stimulation systems by compression and hydrostatic pressure were designed. As one vascularization approach, direct stimulation with ciclopirox olamine (CPX) significantly increased sprouting of hd-mvEC spheroids even in absence of auxiliary cells such as MSCs. Second, a cell sheet composed of hMSCs and hd-mvECs was fabricated by temperature triggered cell sheet engineering and transferred onto the wedge-shaped meniscus model. Third, a biological vascularized scaffold (BioVaSc-TERM) was re-endothelialized with hd-mvECs providing a viable vascularized network. The vascularized BioVaSc-TERM was suggested as wrapping scaffold of the meniscus model by using two suture techniques, the all-inside-repair (AIR) for the posterior horn, and the outside-in-refixation (OIR) for the anterior horn and the middle part. This meniscus model for replacing torn menisci is a promising approach to be further optimized regarding vascularization, biochemical and biomechanical stimuli.}, subject = {Meniskus}, language = {en} } @phdthesis{Goettlich2019, author = {G{\"o}ttlich, Claudia}, title = {Etablierung eines humanen 3D Lungentumor-Testsystems zur Analyse von Behandlungseffekten}, doi = {10.25972/OPUS-16413}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-164132}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Lungenkrebs ist weltweit f{\"u}r die meisten krebsassoziierten Tode verantwortlich. Ursache daf{\"u}r ist unter anderem, dass viele Medikamente in der klinischen Anwendung, aufgrund nicht {\"u}bertragbarer Ergebnisse aus der Pr{\"a}klinik, scheitern. Zur Entwicklung neuer Therapiestrategien werden deshalb Modelle ben{\"o}tigt, welche die in vivo Situation besser widerspiegeln. Besonders wichtig ist es dabei, zu zeigen, f{\"u}r welche Fragestellungen ein neues Testsystem valide Ergebnisse liefert. In dieser Arbeit ist es mit Hilfe des Tissue Engineering gelungen, ein humanes 3D in vitro Lungentumor-Testsystem weiter zu entwickeln und f{\"u}r verschiedene Fragestellungen zu validieren. Zudem konnten sowohl f{\"u}r die Herstellung als auch f{\"u}r die Behandlung der Tumormodelle SOPs etabliert werden. Hier wurde zun{\"a}chst beobachtet, dass die Auswerteparameter f{\"u}r die Beurteilung von Behandlungseffekten eine geringe Varianz aufweisen und das 3D Modell deshalb als Testsystem geeignet ist. Ein Vergleich der Morphologie, des EMT-Status und der Differenzierung der Tumorzelllinien im 3D Modell mit Tumorbiopsaten von Adenokarzinompatienten verdeutlichte, dass die 3D Modelle tumorrelevante Merkmale besitzen. So sind die Zelllinien auf der biologischen Matrix, verglichen mit der jeweiligen 2D Kultur, durch eine reduzierte Proliferationsrate gekennzeichnet, welche eher der in vivo Situation entspricht. F{\"u}r die Etablierung und Validierung des 3D Modells als Testsystem war es notwendig, klinisch relevante Therapien in dem Modell anzuwenden und die Ergebnisse der Behandlung in vitro mit denen im Patienten zu vergleichen. Dabei konnte zun{\"a}chst best{\"a}tigt werden, dass eine zielgerichtete Therapie gegen den EGFR in dem 3D System zu einer verst{\"a}rkten Induktion der Apoptose im Vergleich zu 2D f{\"u}hrt. Dies entspricht klinischen Beobachtungen, bei denen EGFR-mutierte Patienten gut auf eine Therapie mit Tyrosin-Kinase-Inhibitoren (TKI) ansprechen. Anschließend wurde in dieser Arbeit erstmals in vitro gezeigt, dass die Behandlung mit einem HSP90-Inhibitor bei KRAS-Mutation wie in behandelten Patienten keine eindeutigen Vorteile bringt, diese jedoch in Experimenten der 2D Zellkultur mit den entsprechenden Zelllinien vorhergesagt werden. Die Ergebnisse aus dem in vitro Modell spiegeln damit verschiedene klinische Studien wider und unterstreichen das Potenzial des 3D Lungentumor-Testsystems die Wirkung zielgerichteter Therapien vorherzusagen. Durch die Messung von Signalwegsaktivierungen {\"u}ber Phospho-Arrays und Western Blot konnten in dieser Arbeit Unterschiede zwischen 2D und 3D nach Behandlung gezeigt werden. Diese lieferten die Grundlage f{\"u}r bioinformatische Vorhersagen f{\"u}r Medikamente. Mit fortschreitender Erkrankung und dem Entstehen invasiver Tumore, die m{\"o}glicherweise Metastasen bilden, verschlechtert sich die Prognose von Krebspatienten. Zudem entwickeln Patienten, die zun{\"a}chst auf eine Therapie mit TKI ansprechen, bereits nach kurzer Zeit Resistenzen, die ebenfalls zur Progression des Tumorwachstums f{\"u}hren. Zur Wirkungsuntersuchung von Substanzen in solchen fortgeschrittenen Erkrankungsstadien wurde das bestehende Testsystem erweitert. Zum einen wurde mit Hilfe des Wachstumsfaktors TGF-β1 eine EMT ausgel{\"o}st. Hier konnte beobachtet werden, dass sich die Expression verschiedener EMT- und invasionsassoziierter Gene und Proteine ver{\"a}nderte und die Zellen vor allem in dynamischer Kultur verst{\"a}rkt die Basalmembran der Matrix {\"u}berquerten. Zum anderen wurde die Ausbildung von Resistenzen gegen{\"u}ber TKI durch die Generierung von resistenten Subpopulationen aus einer urspr{\"u}nglich sensitiven Zelllinie und anschließender Kultivierung auf der Matrix abgebildet. Dabei zeigte sich keine der klinisch bekannten Mutationen als urs{\"a}chlich f{\"u}r die Resistenz, sodass weitere Mechanismen untersucht wurden. Hier konnten Ver{\"a}nderungen in der Signaltransduktion sowie der Expression EMT-assoziierter Proteine festgestellt werden. Im letzten Teil der Arbeit wurde eine neuartige Behandlung im Bereich der Immuntherapie erfolgreich in dem 3D Modell angewendet. Daf{\"u}r wurden T-Zellen, die einen chim{\"a}ren Antigen-Rezeptor (CAR) gegen ROR1 tragen, in statischer und dynamischer Kultur zu den Tumorzellen gegeben und der Therapieeffekt mittels histologischer F{\"a}rbung und der Bestimmung der Apoptose evaluiert. Zus{\"a}tzlich konnten Eigenschaften der T-Zellen, wie deren Proliferation sowie Zytokinaussch{\"u}ttung quantifiziert und damit eine spezifische Wirkung der CAR transduzierten T-Zellen gegen{\"u}ber Kontroll-T-Zellen nachgewiesen werden. Zusammenfassend ist es in dieser Arbeit gelungen, ein humanes 3D Lungentumor-Testsystem f{\"u}r die Anwendung in der pr{\"a}klinischen Entwicklung von Krebsmedikamenten sowie der Grundlagenforschung im Bereich der Tumorbiologie zu etablieren. Dieses Testsystem ist in der Lage relevante Daten zu Biomarker-geleiteten Therapien, zur Behandlung fortgeschrittener Tumorstadien und zur Verbesserung neuartiger Therapiestrategien zu liefern.}, subject = {Tissue Engineering}, language = {de} }