@phdthesis{Schilling2020,
  author    = {Schilling, Klaus Jussi},
  title     = {Liquid chromatographic analysis of weakly- and non-chromophore compounds focusing on Charged Aerosol Detection},
  doi       = {10.25972/OPUS-20211},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-202114},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2020},
  abstract  = {Liquid chromatography has become the gold standard for modern quality control and purity analytics since its establishment in the 1930s. However, some analytical questions remain very challenging even today. Several molecules and impurities do not possess a suitable chromophore for the application of UV detection or cannot be retained well on regular RP columns. Possible solutions are found in derivatization procedures, but they are time consuming and can be prone to errors. In order to detect non chromophore molecules underivatized, the concept of aerosol based universal detection was established with the introduction of the evaporative light scattering detector (ELSD) in the 1970s and the charged aerosol detector (CAD) followed in 2002. These two challenging fields - polar and non chromophore molecules - are tackled in this thesis. An overview of applications of the CAD in the literature and a comparison to its aerosol based competitors and MS is presented, emphasizing on its high sensitivity and robustness. Parameters and techniques to overcome the drawbacks of CAD, such as the use of gradient compensation or adjusted evaporation temperatures are discussed. A consideration of aspects and drawbacks of data transformation such as the integrated power function value (PFV) in the GMP environment is performed. A method for the fatty acid analysis in polysorbate 80 that was developed on HPLC CAD was transferred to UHPLC CAD. Time and eluent savings of over 75\% and 40\%, respectively, as well as ways to determine the optimal CAD parameters resulted from this investigation. The evaporation temperature was determined as the most crucial setting, which has to be adjusted with care. Optimal signal to noise ratios are found at a compromise between maintaining analyte signal and reducing background noise. The incorporation of semi volatile short chain fatty acids enabled the observation of differences based on volatility of the analyte. E.g. for semi volatiles, an improved linearity by means of adjusting the PFV is achieved at values below 1.0 instead of at elevated PFVs. Using sugars and sugar related antibiotics, a proof-of-concept was given that artificial neural networks can describe correlations between the structure and physicochemical properties of molecules and their response in CAD. Quantitative structure property relationships obtained by design of experiment approaches were able to predict the response of unseen substances and yielded insights on the response generation of the detector, which heavily relies on the formed surface area of the dried particle. Further work can substantiate upon these findings, eventually building a library of diverse eluent compositions, analytes and settings. In order to cope with a chromatographically challenging substances, the application of ion pairing reversed phase chromatography coupled to low wavelength UV detection has been shown as a possible approach for the amino acid L asparagine. A method capable of compendial purity analysis in one single HPLC approach, thus making the utilization of the semi quantitative TLC-ninhydrin analysis obsolete, resulted from this. One cyclic dipeptide impurity (diketoasparagine) that was formerly not assessed, could be identified in several batches and added to the monograph of the Ph.Eur. Studying ibandronate sodium with CAD and ELSD, it was found that randomly occurring spike peaks represent a major flaw of the ELSD when high sample load is present. The research with this non chromophore bisphosphonate drug furthermore shed light on possible drawbacks of mixed mode chromatography methods and ways to overcome these issues. Due to strong adsorption of the analyte onto the column, over ten injections of the highly concentrated test solution were found to be necessary to ensure reproducible peak areas. Preconditioning steps should thus be evaluated for mixed mode approaches during method development and validation. Last, using a ternary mixed mode stationary phase coupled to CAD, a method for the impurity profiling of pamidronate disodium, also applicable to the assessment of phosphate and phosphite in four other bisphosphonate drugs, has been developed. This represents a major advantage over the Ph.Eur. impurity profiling of pamidronate, which requires two different methods, one of which is only a semi quantitative TLC approach.},
  subject      = {HPLC},
  language  = {en}
}
@phdthesis{Reggane2019,
  author    = {Reggane, Maude},
  title     = {Lowering lattice forces of crystalline bases},
  doi       = {10.25972/OPUS-16380},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-163803},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {The number of active pharmaceutical ingredients (APIs) exhibiting a low solubility in aqueous media or a slow dissolution rate kept rising over the past years urging formulation scientists to explore new ways to tackle poor solubility and to enable oral absorption from such compounds. Bioavailability of poorly water-soluble compounds can be improved by increasing the dissolution rate and/or by increasing the gastro intestinal concentration through transient supersaturation. The dissolution rate of the API can be typically modified by the choice of the physical form, the polymorphic form, the powder surface area, and the local pH, while a transient supersaturation can be extended mainly by nucleation or crystallization inhibiting effects. In the present thesis, three strategies were explored to tailor the dissolution rate, the supersaturation and the hydrotropic solubilization of APIs, weak bases, respectively. The first part of this thesis followed a bioinspired approach to extend the kinetic solubility of salts and co-crystals. API salts and co-crystals are high energy forms that can generate supersaturated solutions with respect to any more stable form, typically the most stable API form in physiological environment. The transient kinetic stabilization of supersaturated states, also termed "parachute effect", is considered to improve bioavailability and is one aspect of the formulation that can be tailored. Inspiration from plants, which store high concentrations of aromatic bases in their vacuoles via complexation with polyphenols, sparked the evaluation to use hydroxybenzoic acid derivatives for salt or co-crystal engineering. Imatinib was chosen as the model compound for this investigation as its aromaticity and flat molecular architecture could favor interactions with hydroxybenzoic acid derivatives. One 1:1 Imatinib syringate co-crystal (I-SYA (1:1)) and one 1:2 Imatinib syringate co-crystal salt (I-SYA (1:2)) were obtained. Their dissolution assays in simulated intestinal fluid (SIF; a 50 mM phosphate buffer of pH 6.8) revealed that they formed stable solutions for several hours and days, respectively, in contrast to the marketed Imatinib mesylate salt (approx. 1h). This kinetic stability in solution was linked to the nucleation inhibition of the less soluble Imatinib hydrate by syringic acid (SYA). In solution 1H-NMR studies evidenced the aggregation of Imatinib and SYA. The amphiphilic nature of both Imatinib and SYA is considered to drive their association in solution, additionally, multiple intermolecular interactions such as hydrogen bonds and π-π stacking are likely to contribute. The association in solution enabled a phase of extended supersaturation, i.e., a parachute against desupersaturation, while no negative impact of aggregation on the permeability of both Imatinib and SYA was observed. A prerequisite to reach supersaturation is a rapid dissolution and release of the API from the formulation. Accordingly, the second and third part of this thesis is focused on the so-called "spring effect" of amorphous solid dispersions (ASDs). The addition of a hydrotropic agent, meaning a molecule that can solubilize poorly water-soluble APIs in aqueous solutions (well-known examples of hydrotropes are benzoic acid and nicotinamide) into an amorphous Ciprofloxacin-polymer matrix led to ternary systems with a significantly faster release and higher concentration of the API in SIF as compared to binary ASDs consisting of Ciprofloxacin (CPX) and polymer only. The stronger spring could be rationalized by an improved wetting of the ASD, or/and by a hydrotropic solubilization effect, although these hypotheses need further investigation. Marked differences in the dissolution profiles of binary ASDs were observed in biorelevant fasted simulated intestinal fluid (FaSSIF; a medium containing Na taurocholate (3 mM) and lecithin (0.75 mM) at pH 6.5) as compared to SIF. In FaSSIF, API release from binary polymeric ASDs was largely improved, and the duration of supersaturation was extended. This suggests that the bile salt Na taurocholate and lecithin present in FaSSIF do improve both dissolution rate and supersaturation of ASDs, the two pillars of ASDs as oral enabling formulations. Indeed, bile salts are endogenous surfactants which, together with phospholipids, play an important role in the wetting, solubilization, and absorption of lipophilic compounds. The aim of the third part of the present thesis was to study ASDs as formulation principles reducing the strong positive food effect of Compound A. By inclusion of Na taurocholate (NaTC) within the matrix of polymeric ASDs a significant improvement of the dissolution rate and the kinetic solubility in SIF were achieved. Transient supersaturated states of up to four orders of magnitude over the equilibrium solubility were obtained. Two ASDs were selected for further in vivo evaluation in dog. The first was a NaTC/Eudragit E based ASD meant to dissolve and release Compound A in the acidic environment of the stomach, where its solubility is the highest. The second relied on the release of Compound A in the neutral environment of the duodenum and jejunum by using an enterically dissolving polymer, HPMC-P. Releasing the API at the site of its putative absorption was an attempt to control supersaturation levels in the duodenum and to prevent portioning and thus dilution effects during transfer from the stomach. In fasted dogs, exposure from the NaTC/HPMC-P ASD was close to that of the reference Compound A formulation under fed conditions, which suggests an improved dissolution rate and kinetic solubility under fasted conditions (historical data). The exposure from the NaTC/Eudragit E ASD was twice as low as from the NaTC/HPMC-P ASD, and also lower compared to Compound A reference formulation, whereas in vitro the parachute effect of the NaTC/Eudragit E ASD was largely superior to that of the NaTC/HPMC-P ASD. A difference in the extend of the parachute could be related to differences in the thermodynamic activity of dissolved molecules from the two ASDs. Indeed, the high instability of the NaTC/HPMC-P ASD could stem from a high thermodynamic activity driving diffusion through membranes, whereas less instable solutions of NaTC/Eudragit E could indicate solubilization effects which often translate into a lower flux through the biological membrane. Additionally, the pH of the environment where dissolution takes place might be an important factor for absorption, and could also account for the difference in exposure from the two ASDs. The aim of this thesis was to explore how the intimate environment of weak, poorly soluble bases could be functionalized to improve dissolution rate and kinetic solubility. The investigations highlighted that the performance of enabling oral delivery formulations of weak bases in aqueous media can be enhanced at different levels. At one end initial dissolution rate of ASDs can be tailored by introducing hydrotropes or/and bile salts within the polymeric matrix of ASDs. Bile salts, when combined with appropriate polymers, had also a precipitation inhibition effect enabling the maintenance of supersaturation for a bio-relevant period of time. These results set the ground for further investigations to comprehend specific interactions between bile salts and APIs, and potentially polymers at the molecular level. It will be interesting to explore how such complex systems can be exploited in the formulation design of poorly water-soluble APIs. In addition, it was observed that the duration of supersaturation generated by salts/co-crystals can be extended by the pertinent selection of counterions or coformers. The in vivo relevance of these tunings remains to be evaluated, as translation from closed, in vitro systems to the highly dynamic gastrointestinal environment is not straightforward. A better understanding of the contribution of each kinetic stage (dissolution, supersaturation, and precipitation) and their interplay with physiological factors impacting absorption is essential to facilitate the design of formulations with improved pharmacokinetics.},
  subject      = {Kokristallisation},
  language  = {en}
}
@phdthesis{SchuesslergebHecht2018,
  author    = {Sch{\"u}ßler [geb. Hecht], Nina Kristin Petra},
  title     = {Novel formulation principles for bioavailability enhancement of poorly water-soluble and poorly permeable drugs},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-162766},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2018},
  abstract  = {Since four decades, high-throughput screenings have been conducted in drug discovery, fuelling the identification of potential new drug candidates. This approach, however, often promotes the detection of compounds with undesired physico-chemical properties like poor aqueous solubility or low membrane permeability. Indeed, dissolution and absorption of a drug are prerequisites for systemic exposure and therapeutic effects. Therefore, innovative strategies to optimize unfavourable performance of new drug candidates are in great demand in order to increase drug concentrations at the site of action whilst simultaneously reducing drug variability. In chapter I of this research work, hydrophobic ion pairing (HIP) is discussed as a promising strategy to improve the bioavailability of BCS class III compounds, which have high aqueous solubility and low permeability. The review points out the limitations of poorly absorbable drugs and details the approach of pairing these APIs with hydrophobic counterions. Apart from the motivation to tailor physico-chemical, biopharmaceutical and toxicological properties of BCS class III compounds, the hydrophobic ion pairing facilitates their formulation into drug delivery systems. Besides advantageous effects, disadvantages of the ion pair formation, such as the decreased aqueous solubility of the ions pair, are critically outlined. Finally, the review covers an overview of non-invasive administration routes permitted after ion pair formation, including oral/enteral, buccal, nasal, ocular and transdermal drug administration. Overall, the HIP approach offers substantial benefits regarding the bioavailability enhancement of BCS class III compounds. Chapter II concerns GHQ168 developed by Holzgrabe et al., a BCS class II compound characterized by low aqueous solubility and high permeability. GHQ168 was developed for the treatment of human African trypanosomiasis (HAT), a tropical disease for which novel active compounds are urgently needed. This lead compound was found to be very active against trypanosoma brucei brucei and trypanosoma brucei rhodesiense in cell culture assays, however, the low aqueous solubility prevented further preclinical development. To target this drawback, two different approaches were selected, including (I) the chemical modification and (II) the spray drying of GHQ168. The newly synthesized set of derivatives as well as the spray dried GHQ168 were subjected to a physico-chemical and microbiological characterization. It turned out that both approaches successfully improved aqueous solubility, however, for the derivatives of GHQ168 at the expense of activity. Furthermore, the pharmacokinetic parameters of GHQ168 and of the most active derivatives, GHQ242 and GHQ243, were evaluated. Elimination half-lives between 1.5 to 3.5 h after intraperitoneal administration and modest to strong serum albumin binding for GHQ243 (45\%) and GHQ168 (80\%) and very high binding (> 99\%) for GHQ242 were detected. The spray dried formulation of GHQ168, as well as GHQ242 and GHQ243 were investigated in two in vivo studies in mice infected with t. b. rhodesiense (STIB900), referred to as (I) stringent model and (II) early-treatment model. In the stringent model (2 applications/day on day 3-6 after infection) the mean survival duration (MSD) of mice treated with spray dried GHQ168 exceeded the MSD of the untreated control group (17 days versus 9 days), a difference that was statistically significant. In contrast, no statistical difference was observed for GHQ242 (14 days) and GHQ243 (12 days). GHQ168 was further assessed in the early-treatment model (2 applications/day on day 1-4 after infection) and again a statistically significant improvement of MSD (32 days (end of observation period) versus 7 days) was observed. Finally, exciting antitrypanosomal efficacy for the spray dried formulation of GHQ168 was demonstrated. NADPH oxidases (NOX) were found to be the main source of endothelial reactive oxygen species (ROS) formation. Chapter III reports on the formulation studies on triazolopyrimidine derivatives from the VAS library, a set of NADPH oxidase inhibitors. These were developed for the treatment of elevated ROS levels, which contribute to the development of cardiovascular diseases. Although in vitro results from numerous studies indicated promising efficacy and selectivity for the VAS-compounds, the low water solubility impeded the in vivo translation and further preclinical development. For this reason, three derivatives, VAS2870, VAS3947, and VAS4024 were physico-chemically characterized and VAS3947, the most soluble compound, was selected for further formulation studies. These approaches included (I) spray drying, (II) microemulsification and (III) complexation with cyclodextrins in order to develop formulations for oral and parenteral application. Solubility improvement of VAS3947 was successfully demonstrated for all preparations as expressed by supersaturation ratios in comparison to the solubility of the unformulated compound. For seven spray dried formulations, the ratio ranged from 3-9, and the ratio for four microemulsions was 8-19 after 120 min, respectively. The six cyclodextrin formulations achieved the highest supersaturation ratio between 3 and 174 after 20 hours. NMR measurements elucidated the inclusion of VAS3947 within the CD's cavity as well as the interaction with its outer surface. Ultimately, NOX inhibitors were opened for oral and parenteral administration for the first time. After successful solubility improvement of VAS3947, further investigations towards in vivo studies were conducted including stability studies with a focus on stability in solution and in plasma as presented in chapter IV. Furthermore, permeability and cytotoxicity assays were performed for the first time. It turned out that VAS3947 was instable in buffer and when exposed to light. Moreover, the compound showed decomposition in the presence of mouse microsomes and in human plasma. The VAS compounds contain an oxazol moiety linked to the triazolopyrimidine skeleton via a thioether. This structural element is responsible for the efficacy of the compound class, however it is susceptible to hydrolysis and to further degradation reactions. Moreover, VAS3947 harmed membrane integrity in the cell permeability assays and cytotoxicity investigations in HEK-293 and HEP-G2 cells revealed IC50 values in the same concentration range as reported for efficacy assays. Summarized, it was demonstrated that substances from the VAS library were no appropriate model compounds for ROS investigations nor suitable candidates for further preclinical development.},
  subject      = {L{\"o}slichkeit},
  language  = {en}
}
@phdthesis{Goetz2019,
  author    = {G{\"o}tz, Marcus Rudolf},
  title     = {Effiziente Synthese von Dronabinol und weiterer cannabinoider Derivate und deren pharmakologische Charakterisierung},
  doi       = {10.25972/OPUS-16662},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-166625},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {In dieser Arbeit wurde ein Verfahren zur effizienten Herstellung von (-)-trans-Cannabidiol (CBD, 10), (-)-trans-Δ9-Tetrahydrocannabinol (Dronabinol, 21) und (-)-trans-Cannabidivarin (CBDV, 30) durch kontinuierliche Synthese untersucht und entwickelt. CBD konnte durch kontinuierliche Synthese in drei Schritten aus Olivetolcarbons{\"a}uremethylester (OM, 6) und Menthadienol G (3) mit einer Ausbeute von 41 \% synthetisiert werden. Bei optimierten Bedingungen betrug die Reinheit nach Kristallisation > 99 \%. Die Stereochemie konnte durch R{\"o}ntgenstrukturanalyse eindeutig als 1R,6R bestimmt werden. Vorteilhaft war dabei, dass Toluol anstatt eines chlorierten L{\"o}sungsmittels verwendet werden konnte. Weitere Vorteile waren die kurze Reaktionszeit und die Tatsache, dass die Synthese bei Raumtemperatur durchgef{\"u}hrt werden konnte. Es konnten f{\"u}nf Nebenprodukte detektiert und identifiziert werden, wovon eines Dronabinol war. Bei optimierten Reaktionsparametern konnte eine Ausbeute an Dronabinol von 64,5 \% erreicht werden. Durch Simulated Moving Bed (SMB)-Chromatographie konnte Dronabinol kontinuierlich mit einem Gehalt von > 95 \% hergestellt werden. Nach der Synthese waren vier Verunreinigungen detektierbar, und zwar Olivetol (17), CBD, Exo-Tetrahydrocannabinol (Exo-THC, 23) und Δ8-Tetrahydrocannabinol (Δ8-THC, 22). Durch die SMB-Aufreinigung konnten alle Verunreinigungen auf einen monographiekonformen (USP 37) Gehalt abgereichert werden. Nach der finalen destillativen Aufarbeitung trat eine noch nicht identifizierte Verunreinigung in einem Gehalt von ca. 0,4 Fl{\"a}chen-\% auf. CBDV konnte durch kontinuierliche Synthese in drei Schritten aus Divarincarbons{\"a}uremethylester (DM, 25) und Menthadienol G synthetisiert werden. Die Ausbeute betrug ca. 30 \%, die Reinheit nach Kristallisation > 99 \%. Es konnten f{\"u}nf Nebenprodukte detektiert werden, die im Rahmen dieser Arbeit nicht weiter charakterisiert wurden. Der Syntheseweg bietet durch Modifikation der Seitengruppen an Position 6 (R1) und Position 5 (R2) der Alkylbenzol-Gruppe Zugang zu synthetischen Cannabinoiden mit einem CBD- oder CBDV-Grundger{\"u}st. Es wurden neun neue Cannabinoide hergestellt: 2-Hydroxyethylcannabidiolat (2-HEC, 31), 2-Hydroxypentylcannabidiolat (2 HPC, 32), Glycerylcannabidiolat (GCBD, 33), Cyclohexylcannabidiolat (CHC, 34), Hexylcannabidiolat (HC, 35), N-Methylsulfonylcannabidiolat (NMSC, 36), 2 Hydroxyethylcannabidivarinolat (2-HECBDV, 37), Cyclohexylcannabidivarinolat (CHCBDV, 38) und Hexylcannabidivarinolat (HCBDV, 39). Die Bindungsaffinit{\"a}t wurde in Cannabinoid-Rezeptor-transfizierten HEK293EBNA-Zellen untersucht, die intrinsische Aktivit{\"a}t in CHO-Zellen, die Induktion von NF-κB (nuclear factor kappa B) sowie von NFAT (nuclear factor of activated T cells) in Jurkat-T Zellen, die Induktion proinflammatorischer Zytokine und Chemokine (Interleukin(IL)-6, IL-1β, CC Chemokinligand 2' (CCL2) und Tumornekrosefaktor(TNF)-α) auf mRNA-Ebene in RAW264.7-Makrophagen und die Expression von proinflammatorischen Zytokinen (IL-1β, IL-6, IL-8, TNF-α) und Prostaglandin E2 (PGE2) auf Proteinebene in prim{\"a}ren humanen Monozyten. Die CBD-Derivate zeigten eine h{\"o}here Selektivit{\"a}t f{\"u}r CB2-Rezeptoren. Die CBDV-Derivate HCBDV und CHCBDV zeigten eine spezifische Bindung an CB1- und CB2-Rezeptoren im nanomolaren Bereich. 2-HEC, 2-HPC, GCBD und NMSC wirkten als Agonisten an CB2- und als Antagonisten am CB1-Rezeptor. CHC band an CB1 und CB2 im submikromolaren Bereich und schien ein Agonist f{\"u}r beide Rezeptoren zu sein. 2- HECBD wirkte als Agonist auf CB2-Rezeptoren und als Antagonist auf CB1-Rezeptoren. In Jurkat-T Zellen hemmte NMSC dosisabh{\"a}ngig die Aktivit{\"a}t von NF-κB sowie von NFAT. 2-HEC, 2-HPC und GCBD hemmten die Expression von NFAT ebenfalls dosisabh{\"a}ngig. CHC und HC reduzierten dosisabh{\"a}ngig die Expression von IL-1β- und CCL2-mRNA in RAW264.7-Makrophagen. NMSC hemmte in geringeren Dosen IL-1β, CCL2 sowie TNF-α und induzierte in h{\"o}heren Dosen einen starken Anstieg der IL-6-mRNA. In prim{\"a}ren humanen Monozyten hemmten 2 HEC und GCBD konzentrationsabh{\"a}ngig die Synthese von IL-1β, IL-6 und TNF-α. 2-HPC hemmte dosisabh{\"a}ngig die Bildung von TNF-α und IL-6. HC verminderte dosisabh{\"a}ngig die Freisetzung von TNF-α und IL-6. NMSC steigerte die durch LPS erh{\"o}hte Freisetzung von IL-1β noch weiter, hemmte aber TNF-α, IL-8 und PGE2. Die hier untersuchten CBD- und CBDV-Derivate sind geeignet, gezielt an Cannabinoid-Rezeptoren zu wirken. Einige der Derivate k{\"o}nnten als selektive CB2-Agonisten genutzt werden. Die L{\"a}nge des aliphatischen Rests an R2 von CBD (Pentyl-Cannabinoiden) und CBDV (Propyl-Cannabinoiden) korrelierte nicht mit der Bindungsaffinit{\"a}t. Eine h{\"o}here Polarit{\"a}t an R1 (2-HECBDV > NMSC > GCBD > 2-HEC) schien demgegen{\"u}ber die agonistische Aktivit{\"a}t an CB2 zu beg{\"u}nstigen. Um den Ergebnissen zur Beziehung zwischen Struktur und Wirkung noch mehr Bedeutung zu geben, w{\"a}ren weitere synthetische Derivate und deren Testung notwendig.},
  subject      = {Dronabinol},
  language  = {de}
}
@phdthesis{Wahl2019,
  author    = {Wahl, Joachim},
  title     = {The Use of Ionic Liquids in Capillary Electrophoresis Enantioseparation},
  doi       = {10.25972/OPUS-17639},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-176397},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {Two chiral chemical molecules being mirror images of each other, also referred to as enantiomers, may have different pharmacokinetic, pharmacodynamic, and toxicological effects. Thus, pharmaceutical manufacturers and authorities are increasingly interested in the approval of enantiopure drugs. However, the isomeric purity and the limits for isomeric impurities have to be specified applying enantioselective analytical methods, such as capillary electrophoresis. The separation of enantiomers in capillary electrophoresis may be improved by the addition of ionic liquids to the background electrolyte. The aim of this work was to investigate the influence of different separation conditions on the enantioseparation of phenethylamines in background electrolytes containing ionic liquids based on tetrabutylammonium cations. Best chiral separations were achieved at acidic pH values using phosphate buffers containing 125 mmol/L tetrabutylammonium based salts. Different reasons explaining enhanced enantioseparations in buffers containing ionic liquids were found. First, due to an improvement of the cyclodextrin solubility, the addition of ionic liquids to the background electrolyte enables the use of higher concentrations of these chiral selector. Furthermore, the adsorption of tetrabutylammonium cations to the negatively charged capillary surface results in a reduction of the electroosmotic flow. Hence, the resulting prolongation of migration times leads to a longer period of time for the separation of temporarily formed diastereomeric analyte cyclodextrin complexes, which yields improved enantioseparation. Additionally, due to a decrease of the adsorption of positively charged phenethylamine analyte molecules to capillary surface silanol groups, the adsorption of ionic liquid cations inhibits peak broadening. A further reason explaining an enhanced enantioseparation by the addition of ionic liquids to the background electrolyte is a competition between tetrabutylammonium cations and analyte enantiomers for the inclusion into cyclodextrin cavities. Furthermore, the influence of different chiral counterions, combined with tetrabutylammonium cations, on the enantioseparation of phenethylamines was investigated. Solely anions based on the basic proteinogenic amino acids L lysine and L arginine yielded chiral separation results superior to those achieved using achiral tetrabutylammonium chloride as background electrolyte additive. Especially the application of tetrabutylammonium L argininate gave very good enantioseparations of all investigated ephedrine derivatives, which might be explained by the ability of L arginine to affect the formation of complexes between analytes and cyclodextrins. Besides the investigation of the influence of ionic liquids on the enantioseparation, complexes between phenethylamine enantiomers and β cyclodextrin derivatives were characterized by affinity capillary electrophoresis. The binding constants between analyte enantiomers and cyclodextrins and the electrophoretic mobilities of the temporarily formed complexes were determined and compared to the observed chiral resolution values. While neither the calculated binding constants nor their differences correlated with the quality of the enantioseparation, a strong correlation between the differences of the electrophoretic mobilities of the complexes and the chiral resolution values was found.},
  subject      = {Kapillarelektrophorese},
  language  = {en}
}
@phdthesis{Berninger2019,
  author    = {Berninger, Michael},
  title     = {Development of Novel Quinolone Amides Against the African Sleeping Sickness - A Fluorine Walk},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-176428},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {In recent years the transmission of the Human African Trypanosomiasis could be significantly reduced. The reported cases in 2016 reached a historic low level of 2184 cases and these achievements can be ascribed to intense control and surveillance programmes.118 However, most of the reported cases (>1000 in 2015) occurred in the Democratic Republic of the Congo and thus, need to be treated adequately. In particular, when the parasites have traversed the blood-brain barrier (BBB), treatment proved to be even more difficult. In addition, the number of cases always came in waves due to many reasons, e.g., development of resistances. Thus, it can be expected from experiences of the past that the number of cases will increase again. Hence, novel chemical entities are desperately needed in order to overcome the drawbacks which are associated with the current treatment options. Our drug discovery approach included an initial drug repurposing strategy combined with a phenotypic screening. S. Niedermeier found novel active compounds derived from commercial fluoroquinolones. The most promising hit compound was further developed by G. Hiltensperger resulting in the lead quinolone amide GHQ168 (IC50 = 0.047 µM). This doctoral thesis is about new insights into the SAR of the quinolone amides and the enhancement of the lead compound. Special consideration was given to the fluorine atom in the quinolone amides and how certain fluorine substitution patterns influence the antitrypanosomal activity, physicochemical properties and pharmacokinetics (i.e. 'fluorine walk'). Moreover, the ability of the compound class crossing the BBB should be investigated. This feature is inevitable necessary in order to potentially treat African sleeping sickness stage II. The Gould-Jacobs protocol was predominantly used for the synthesis of the quinolone core. Since former SAR studies mainly concentrated on the variation in positions 1, 3 and 7, quinolone scaffolds (2a-i) with diverse substitution patterns regarding positions 5, 6, 7 and 8 were synthesised in this thesis. The resulting quinolone amides were evaluated for their antitrypanosomal activity. Voluminous residues in position C-5 resulted in diminished activities (compounds 13, 16 and 18) and solely small-sized moieties were tolerated. In particular the fluorine atom in position 5 revealed beneficial trypanocidal effects as shown for compounds 6 (IC50 = 0.05 µM), 8 (IC50 = 0.04 µM), and 24 (IC50 = 0.02 µM). Furthermore, having fluorine only in position 5 of the quinolone core could considerably reduce the cytotoxic effects (CC50 >100 µM, SI = >2000 for 6). Hence, the 5-fluoro-substituted quinolone amides were considered superior to GHQ168. Regarding the C-6 position all other moieties (e.g., H in 9, OCH3 in 10, CF3 in 12) except of a fluorine atom decreased the activity against Trypanosoma brucei brucei. A double fluorination in C-6 and C-8 was not beneficial (IC50 = 0.06 µM for 7) and a single fluorine atom in C-8 even showed a negative effect (IC50 = 0.79 µM for 5). The logP value is considered a surrogate parameter for lipophlicity and thus, affecting permeability and solubility processes. In particular the fluorine atom influences the lipophilicity due to versatile effects: Lipophilicity is increased by additional fluorine atoms on aromatic rings (7, 23) and reduced by fluorine atoms at an alkyl chain (49), respectively. Additionally, the 5-fluoro-substituted quinolone amides (6, 8, and 24) could prove the contrary effect of decreasing lipophilicity when the aromatic fluorine substituent is in vicinity to a carbonyl group. For the most promising drug candidates 6, 23, and 24 the respective metabolites and the metabolic turnover were investigated by C. Erk. In comparison to GHQ168 the hydroxylation of the benzylamide was prevented by the para-fluorine atom. Hence, half-life was extended for compound 23 (t1/2 = 6.4 h) and N-desalkylation was the predominant pathway. Moreover, the respective fluorine substitution pattern of the quinolone core affected the metabolism of compound 6. The 5-fluoro-substituted quinolone amide was less prone for biotransformation (t1/2 = 7.2 h) and half-life could even be further prolonged for compound 24 (t1/2 = 7.7 h). Due to the most appropriate safety profile of compound 6, this particular drug candidate was considered for in vivo study. Its poor solubility made a direct intraperitoneal administration unfeasible. Thus, an amorphous solid dispersion of 6 was generated using the spray-drying method according to the previous protocol. Unfortunately, the required solubility for the predicted in vivo study was not achieved. Furthermore, the compound class of the quinolone amide was evaluated for its ability for brain penetration. The methanesulfonyl precursor 48 was synthesised and subsequently radiofluorinated in the group of Prof. Dr. Samnick (Department of Nuclear Medicine, University Hospital of W{\"u}rzburg). The labelled compound [18F]49 was administered to mice, and its distribution throughout the body was analysed using positron emission tomography and autoradiography, respectively. The autoradiography of the murine brains revealed medium to high concentrations of [18F]49. Therefore, the quinolone amides are generally suitable for treating Human African Trypanosomiasis stage II. A scaffold hopping approach was performed starting from the quinolone amides and concluding with the compound class of pyrazoloquinolin-3-ones. The intramolecular hydrogen bond between the sec. amide and the C-4 carbonyl moiety was replaced by a covalent bond. The two compound classes were comparable regarding the antitrypanosomal activity to some degree (IC50 = 7.9 µM (EK02) vs. 6.37 µM (53a)). However, a final evaluation of 59 was not possible due to poor solubility.},
  subject      = {Trypanosomiase},
  language  = {en}
}
@phdthesis{Mohsen2017,
  author    = {Mohsen, Amal Mahmoud Yassin},
  title     = {Structure Activity Relationships of Monomeric and Dimeric Strychnine Analogs as Ligands Targeting Glycine Receptors},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142228},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2017},
  abstract  = {The inhibitory glycine receptors are one of the major mediators of rapid synaptic inhibition in the mammalian brainstem, spinal cord and higher brain centres. They are ligand-gated ion channels that are mainly involved in the regulation of motor functions. Dysfunction of the receptor is associated with motor disorders such as hypereklepxia or some forms of spasticity. GlyR is composed of two glycosylated integral membrane proteins α and β and a peripheral membrane protein of gephyrin. Moreover, there are four known isoforms of the α-subunit (α1-4) of GlyR while there is a single β-subunit. Glycine receptors can be homomeric including α subunits only or heteromeric containing both α and β subunits. To date, strychnine is the ligand that has the highest affinity as glycine receptor ligand. It acts as a competitive antagonist of glycine that results in the inhibition of Cl- ions permeation and consequently reducing GlyR-mediated inhibition. For a long time, the details of the molecular mechanism of GlyRs inactivation by strychnine were insufficient due to the lack of high-resolution structures of the receptor. Only homology models based on structures of other cys-loop receptors have been available. Recently, 3.0 {\AA} X-ray structure of the human glycine receptor- α3 homopentamer in complex with strychnine, as well as electro cryo-microscopy structures of the zebra fish α1 GlyR in complex with strychnine and glycine were published. Such information provided detailed insight into the molecular recognition of agonists and antagonists and mechanisms of GlyR activation and inactivation. Very recently, a series of dimeric strychnine analogs obtained by diamide formation of two molecules of 2-aminostrychnine with diacids of different chain length was pharmacologically evaluated at human α1 and α1β glycine receptors. None of the dimeric analogs was superior to strychnine. The present work focused on the extension of the structure-activity relationships of strychnine derivatives at glycine receptors All the synthesized compounds were pharmacologically evaluated at human α1 and α1β glycine receptors in a functional FLIPRTM assay and the most potent analogs were pharmacologically evaluated in a whole cell patch-clamp assay and in [3H]strychnine binding studies. It was reported that 11-(E)-isonitrosostrychnine displayed a 2-times increased binding to both α1 and α1β glycine receptors which prompted us to choose the hydroxyl group as a suitable attachment point to connect two 11-(E)-isonitrosostrychnine molecules using a spacer. In order to explore the GlyR pocket tolerance for oxime extension, a series of oxime ethers with different spacer lengths and sterical/lipophilic properties were synthesized biologically evaluated. Among all the oxime ethers, methyl, allyl and propagyl oxime ethers were the most potent antagonists displaying IC50 values similar to that of strychnine. These findings indicated that strychnine binding site at GlyRs comprises an additional small lipophilic pocket located in close proximity to C11 of strychnine and the groups best accommodated in this pocket are (E)-allyl and (E)-propagyl oxime ethers. Moreover, 11-aminostrychnine, and the corresponding propionamide were prepared and pharmacologically evaluated to examine the amide function at C11 as potential linker. A series of dimeric strychnine analogs designed by linking two strychnine molecules through amino groups in position 11 with diacids were synthesized and tested in binding studies and functional assays at human α1 and α1β glycine receptors. The synthesized bivalent ligands were designed to bind simultaneously to two α-subunits of the pentameric glycine receptors causing a possibly stronger inhibition than the monomeric strychnine. However, all the bivalent derivatives showed no significant difference in potency compared to strychnine. When comparing the reference monomeric propionamide containing ethylene spacer to the dimeric ligand containing butylene spacer, a 3-fold increase in potency was observed. Since the dimer containing (CH2)10 spacer length was found to be equipotent to strychnine, it is assumed that one molecule of strychnine binds to the receptor and the 'additional' strychnine molecule in the dimer probably protrudes from the orthosteric binding sites of the receptor.},
  subject      = {Strychnin},
  language  = {en}
}
@phdthesis{Messerer2017,
  author    = {Messerer, Regina},
  title     = {Synthesis of Dualsteric Ligands for Muscarinic Acetylcholine Receptors and Cholinesterase Inhibitors},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-149007},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2017},
  abstract  = {The study is dealing with the synthesis and pharmacological investigation of newly designed dualsteric ligands of muscarinic acetylcholine receptors belonging to the superfamily of G protein-coupled receptors. Such bipharmacophoric ligands combine the advantages of the orthosteric binding site (high-affinity) and of the topographically distinct allosteric binding site (subtype-selectivity) resulting in compounds with reduced side effects. This opens the way to a new therapeutic approach in the treatment of e.g. chronic pain, drug withdrawal, Parkinson`s and Alzheimer`s disease. Furthermore, the newly synthesized dualsteric compounds were pharmacologically investigated in order to get a better understanding of the activation and signaling processes in muscarinic acetylcholine receptors, especially with regard to partial agonism. The development of the "dynamic ligand binding" concept offers new perspectives for ligand binding and signaling at G protein-coupled receptors. GPCRs are no longer considered as simple on/off switches. Dualsteric ligands can bind in a dualsteric pose, reflecting an active receptor state as well as in a purely allosteric binding pose, characterized by an inactive receptor state resulting in partial agonism. The degree of partial agonism depends on the ratio of active versus inactive receptor populations. On this basis, orthosteric/orthosteric hybrid ligands consisting of the antagonist atropine and scopolamine, respectively, as well as of the agonist iperoxo and isoxazole, respectively, linked via different alkyl chain length were synthesized in order to investigate partial agonism (Figure 1). Figure 1: Structures of the synthesized iperoxo/isoxazole-atropine/scopolamine-hybrids. Furthermore, different sets of quaternary and tertiary homodimers consisting either of two iperoxo or two acetylcholine units were synthesized in order to study their extent on partial agonism (Figure 2). The two agonists were connected by varying alkyl chain length. Binding studies on CHO-hM2 cells of the quaternary compounds revealed that dimerization of the agonist results in a loss of potency. The iperoxo-dimers reached higher maximum effects on the Gi- as well as on the Gs pathway in comparison to the acetylcholine-dimers. Besides the choice of the orthosteric building block (potency of the agonist), the alkyl chain length is also crucial for the degree of partial agonism. Figure 2: Structures of the synthesized quat./tert. iperoxo/acetylcholine-homodimers. Quinolone-based hybrids connected to the superagonist iperoxo and to the endogenous ligand acetylcholine, respectively, linked through an alkyl chain of different length were synthesized in order to develop further partial agonists (Figure 3). FRET studies confirmed M1 subtype-selectivity as well as linker dependent receptor response. The greatest positive FRET signal was observed with quinolone-C6-iper resulting from a positive cooperativity between the two separated moieties, alloster and orthoster. However, the corresponding hybrids with a longer linker led to an inverse FRET signal indicating a different binding mode, e.g. purely allosteric, in contrast to the shorter linked hybrids. Furthermore, the flexible alkyl spacer was replaced by a rigidified linker resulting in the hybrid quinolone-rigid-iperoxo (Figure 3). FRET studies on the M1 receptor showed reduced FRET kinetics, resulting from interactions between the bulky linker and the aromatic lid, located between the orthosteric and allosteric binding site. A bitopic binding mode of the rigidified hybrid is presumed. For further clarity, mutational studies are necessary. Figure 3: M1-selective hybrid compounds. Another aim of this work was the design and synthesis of new hybrid compounds, acting as agonists at the M1 and M2 receptor and as inhibitors for AChE and BChE in the context of M. Alzheimer. Several sets of hybrid compounds consisting of different pharmacophoric units (catalytic active site: phthalimide, naphthalimide, tacrine; peripheric anionic site: iperoxo, isoxazole) linked through a polymethylene chain of varying length were synthesized. Tac-C10-iper (Figure 4), consisting of tacrine and the superagonist iperoxo linked by a C10 polymethylene spacer, was found to have excellent anticholinesterase activity for both AChE (pIC50 = 9.81) and BChE (pIC50 = 8.75). Docking experiments provided a structural model to rationalize the inhibitory power towards AChE. Additionally, the tacrine related hybrids showed affinity to the M1 and M2 receptor. Such compounds, addressing more than one molecular target are favorable for multifactorial diseases such as Alzheimer. Figure 4: Structure of the most active compound regarding anticholinesterase activity. In summary, the choice of the pharmacophoric units, their connecting point as well as the nature, length, and flexibility of the linker play an important role for the activity of designed bivalent ligands. A shorter linker length cannot bridge both binding sites simultaneously in contrast to longer linker chains. On the other hand, too long linker chains can result in unwanted steric interactions. Further investigations with respect to structural variations of hybrid compounds, with or without quaternary ammonium groups, are necessary in the light of drug development.},
  subject      = {Cholinesteraseinhibitor},
  language  = {en}
}
@phdthesis{HebronMwalwisi2018,
  author    = {Hebron Mwalwisi, Yonah},
  title     = {Assessment of Counterfeit and Substandard Antimalarial Medicines using High Performance Thin Layer Chromatography and High Performance Liquid Chromatography},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-145821},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2018},
  abstract  = {Although the prevalence of substandard and counterfeit pharmaceutical products is a global problem, it is more critical in resource-constrained countries. The national medicines regulatory authorities (MNRA) in these countries have limited resources to cater for regular quality surveillance programmes aimed at ensuring that medicines in circulation are of acceptable quality. Among the reasons explained to hinder the implementation of these strategies is that compendial monographs are too complicated and require expensive infrastructures in terms of environment, equipment and consumables. In this study it was therefore aimed at developing simple, precise, and robust HPLC and HPTLC methods utilizing inexpensive, readily available chemicals (methanol and simple buffers) that can determine the APIs, other API than declared one, and which are capable of impurity profiling. As an outcome of this study, three isocratic and robust HPLC and two HPTLC methods for sulfadoxine, sulfalene, pyrimethamine, primaquine, artesunate, as well as amodiaquine have been developed and validated. All HPLC methods are operated using an isocratic elution mode which means they can be implemented even with a single pump HPLC system and standard C18 columns. The densitometric sulfadoxine/sulfalene and pyrimethamine method utilizes standard TLC plates as well as inexpensive, readily available and safe chemicals (toluene, methanol, and ethyl acetate), while that for artesunate and amodiaquine requires HPTLC plates as well as triethylamine and acetonitrile due to challenges associated with the analysis of amodiaquine and poorly the detectable artesunate. These HPTLC methods can be implemented as alternative to those requiring HPLC equipment e.g. in countries that already have acquired densitometer equipment. It is understood that HPTLC methods are less sensitive, precise and accurate when compared to HPLC methods, but this hindrance can easily be addressed by sending representative samples to third party quality control laboratories where the analytical results are verified using compendial HPLC methods on a regular basis. It is therefore anticipated that the implementation of these methods will not only address the problem of limited resources required for medicines quality control but also increase the number of monitored targeted antimalarial products as well as the number of resource- constrained countries participating in quality monitoring campaigns. Moreover, the experiences and skills acquired within this work will be applied to other API groups, e. g. antibiotics, afterwards.},
  subject      = {Instrumentelle Analytik},
  language  = {en}
}
@phdthesis{Zilker2019,
  author    = {Zilker, Markus},
  title     = {The stability of finished pharmaceutical products and drug substances beyond their labeled expiry dates},
  doi       = {10.25972/OPUS-18069},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-180695},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {Upon approval of a drug, the stability of the API and the FPP has to be studied intensively because it determines the shelf-life. If a drug is found to be stable, the expiry date is arbitrary set to five years at the maximum, if a drug tends to undergo degradation, the expiry date is set shorter. The drug product must comply with predefined specifications in accordance with the ICH guidelines Q6A and Q6B during its entire market life. The content of the active substance is required to be within a specification of 95-105\% of its labeled claim until expiry corresponding to the ICH guideline Q1A(R2). However, there is little or scattered literature information addressing the stability of drug products beyond their expiry dates. The objective of this thesis was to study and assess the long-term stability of a collection involving numerous pure drug substances and ampoules manufactured in the 20th century. The content and the impurity profile were examined by means of appropriate analytical methods, mainly using liquid chromatography. The results were compared to data being available in the literature. Assessing the stability regarding the dosage form and the affiliation of the drug class was conducted. The experimental studies comprise the examination of 50 drug substances manufactured 20-30 years ago and 14 long expired ampoules which were older than 40 years in the time of analysis, exceeding many times the maximum shelf life of five years. For investigation of the solid drug substances, pharmacopoeial methods were applied as far as possible. Indeed, results of the study showed that 44 tested substances still complied with the specification of the Ph. Eur. with regard to the content and impurity profile, even after more than two decades of storage. For analysis of the injection solutions, HPLC-UV and HPLC-ESI/MS techniques were applied, commonly based on liquid chromatography methods of the Ph. Eur. for determination of related substances. Each method was further validated for its application to ensure accurate API quantification corresponding to ICH Q2(R1). Quite a few ampoules were identified to show surprisingly high stability. In spite of their age of 53-72 years, APIs such as caffeine, etilefrine, synephrine, metamizole sodium, furosemide, and sodium salicylate complied with the specified content that is valid nowadays, respectively. Nevertheless, typical degradation reaction, e.g. hydrolysis, oxidation, or isomerization, was observed in all remaining ampoules. Various degrees of hydrolysis were revealed for scopolamine, procaine, and adenosine triphosphate, the contents were decreased to 71\%, 70\%, and 15\% of the declared concentrations, respectively. In the epinephrine and dipyridamole ampoules, oxidative degradation has been occurred, finding respective API contents of more or less 70\%. For dihydroergotamine, excessive decomposition by epimerization was observed, resulting in an API content of 21\% and degradation by isomerization was found in lobeline, still containing 64\% of the labeled claim. In conclusion, supported by the data of the present studies and the literature, defining and authorizing a longer shelf-life may be applicable to numerous pharmaceuticals which should be considered by pharmaceutical manufacturers and regulatory authorities, if justified based on stability studies. A general extension of the shelf-lives of drug products and the abolishment or extension of the maximum shelf-life limit of five years would prevent disposing of still potent medications and save a lot of money to the entire health care system.},
  subject      = {Stabilit{\"a}t},
  language  = {en}
}