@phdthesis{Wittmann2014,
  author    = {Wittmann, Katharina},
  title     = {Adipose Tissue Engineering - Development of Volume-Stable 3-Dimensional Constructs and Approaches Towards Effective Vascularization},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-107196},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2014},
  abstract  = {Adipose tissue defects and related pathologies still represent major challenges in reconstructive surgery. Based on to the paradigm 'replace with alike', adipose tissue is considered the ideal substitute material for damaged soft tissue [1-3]. Yet the transfer of autologous fat, particularly larger volumes, is confined by deficient and unpredictable long term results, as well as considerable operative morbidity at the donor and recipient site [4-6], calling for innovative treatment options to improve patient care. With the aim to achieve complete regeneration of soft tissue defects, adipose tissue engineering holds great promise to provide functional, biologically active adipose tissue equivalents. Here, especially long-term maintenance of volume and shape, as well as sufficient vascularization of engineered adipose tissue represent critical and unresolved challenges [7-9]. For adipose tissue engineering approaches to be successful, it is thus essential to generate constructs that retain their initial volume in vivo, as well as to ensure their rapid vascularization to support cell survival and differentiation for full tissue regeneration [9,10]. Therefore, it was the ultimate goal of this thesis to develop volume-stable 3D adipose tissue constructs and to identify applicable strategies for sufficient vascularization of engineered constructs. The feasibility of the investigated approaches was verified by translation from in vitro to in vivo as a critical step for the advancement of potential regenerative therapies. For the development of volume-stable constructs, the combination of two biomaterials with complementary properties was successfully implemented. In contrast to previous approaches in the field using mainly non-degradable solid structures for mechanical protection of developing adipose tissue [11-13], the combination of a cell-instructive hydrogel component with a biodegradable porous support structure of adequate texture was shown advantageous for the generation of volume-stable adipose tissue. Specifically, stable fibrin hydrogels previously developed in our group [14] served as cell carrier and supported the adipogenic development of adipose-derived stem cells (ASCs) as reflected by lipid accumulation and leptin secretion. Stable fibrin gels were thereby shown to be equally supportive of adipogenesis compared to commercial TissuCol hydrogels in vitro. Using ASCs as a safe source of autologous cells [15,16] added substantial practicability to the approach. To enhance the mechanical strength of the engineered constructs, porous biodegradable poly(ε caprolactone)-based polyurethane (PU) scaffolds were introduced as support structures and shown to exhibit adequately sized pores to host adipocytes as well as interconnectivity to allow coherent tissue formation and vascularization. Low wettability and impaired cell attachment indicated that PU scaffolds alone were insufficient in retaining cells within the pores, yet cytocompatibility and differentiation of ASCs were adequately demonstrated, rendering the PU scaffolds suitable as support structures for the generation of stable fibrin/PU composite constructs (Chapter 3). Volume-stable adipose tissue constructs were generated by seeding the pre-established stable fibrin/PU composites with ASCs. Investigation of size and weight in vitro revealed that composite constructs featured enhanced stability relative to stable fibrin gels alone. Comparing stable fibrin gels and TissuCol as hydrogel components, it was found that TissuCol gels were less resilient to degradation and contraction. Composite constructs were fully characterized, showing good cell viability of ASCs and strong adipogenic development as indicated by functional analysis via histological Oil Red O staining of lipid vacuoles, qRT-PCR analysis of prominent adipogenic markers (PPARγ, C/EBPα, GLUT4, aP2) and quantification of leptin secretion. In a pilot study in vivo, investigating the suitability of the constructs for transplantation, stable fibrin/PU composites provided with a vascular pedicle gave rise to areas of well-vascularized adipose tissue, contrasted by insufficient capillary formation and adipogenesis in constructs implanted without pedicle. The biomaterial combination of stable fibrin gels and porous biodegradable PU scaffolds was thereby shown highly suitable for the generation of volume-stable adipose tissue constructs in vivo, and in addition, the effectiveness of immediate vascularization upon implantation to support adipose tissue formation was demonstrated (Chapter 4). Further pursuing the objective to investigate adequate vascularization strategies for engineered adipose tissue, hypoxic preconditioning was conducted as a possible approach for in vitro prevascularization. In 2D culture experiments, analysis on the cellular level illustrated that the adipogenic potential of ASCs was reduced under hypoxic conditions when applied in the differentiation phase, irrespective of the oxygen tension encountered by the cells during expansion. Hypoxic treatment of ASCs in 3D constructs prepared from stable fibrin gels similarly resulted in reduced adipogenesis, whereas endothelial CD31 expression as well as enhanced leptin and vascular endothelial growth factor (VEGF) secretion indicated that hypoxic treatment indeed resulted in a pro-angiogenic response of ASCs. Especially the observed profound regulation of leptin production by hypoxia and the dual role of leptin as adipokine and angiogenic modulator were considered an interesting connection advocating further study. Having confirmed the hypothesis that hypoxia may generate a pro-angiogenic milieu inside ASC-seeded constructs, faster vessel ingrowth and improved vascularization as well as an enhanced tolerance of hypoxia-treated ASCs towards ischemic conditions upon implanatation may be expected, but remain to be verified in rodent models in vivo (Chapter 5). Having previously been utilized for bone and cartilage engineering [17-19], as well as for revascularization and wound healing applications [20-22], stromal-vascular fraction (SVF) cells were investigated as a novel cell source for adipose tissue engineering. Providing cells with adipogenic differentiation as well as vascularization potential, the SVF was applied with the specific aim to promote adipogenesis and vascularization in engineered constructs in vivo. With only basic in vitro investigations by Lin et al. addressing the SVF for adipose repair to date [23], the present work thoroughly investigated SVF cells for adipose tissue construct generation in vitro, and in particular, pioneered the application of these cells for adipose tissue engineering in vivo. Initial in vitro experiments compared SVF- and ASC-seeded stable fibrin constructs in different medium compositions employing preadipocyte (PGM-2) and endothelial cell culture medium (EGM-2). It was found that a 1:1 mixture of PGM-2 and EGM-2, as previously established for co-culture models of adipogenesis [24], efficiently maintained cells with adipogenic and endothelial potential in SVF-seeded constructs in short and long-term culture setups. Observations on the cellular level were supported by analysis of mRNA expression of characteristic adipogenic and endothelial markers. In preparation of the evaluation of SVF-seeded constructs under in vivo conditions, a whole mount staining (WMS) method, facilitating the 3D visualization of adipocytes and blood vessels, was successfully established and optimized using native adipose tissue as template (Chapter 6). In a subcutaneous nude mouse model, SVF cells were, for the first time in vivo, elucidated for their potential to support the functional assembly of vascularized adipose tissue. Investigating the effect of adipogenic precultivation of SVF-seeded stable fibrin constructs in vitro prior to implantation on the in vivo outcome, hormonal induction was shown beneficial in terms of adipocyte development, whereas a strong vascularization potential was observed when no adipogenic inducers were added. Via histological analysis, it was proven that the developed structures were of human origin and derived from the implanted cells. Applying SVF cells without precultivation in vitro but comparing two different fibrin carriers, namely stable fibrin and TissuCol gels, revealed that TissuCol profoundly supported adipose formation by SVF cells in vivo. This was contrasted by only minor SVF cell development and a strong reduction of cell numbers in stable fibrin gels implanted without precultivation. Histomorphometric analysis of adipocytes and capillary structures was conducted to verify the qualitative results, concluding that particularly SVF cells in TissuCol were highly suited for adipose regeneration in vivo. Employing the established WMS technique, the close interaction of mature adipocytes and blood vessels in TissuCol constructs was impressively shown and via species-specific human vimentin staining, the expected strong involvement of implanted SVF cells in the formation of coherent adipose tissue was confirmed (Chapter 7). With the development of biodegradable volume-stable adipose tissue constructs, the application of ASCs and SVF cells as two promising cell sources for functional adipose regeneration, as well as the thorough evaluation of strategies for construct vascularization in vitro and in vivo, this thesis provides valuable solutions to current challenges in adipose tissue engineering. The presented findings further open up new perspectives for innovative treatments to cure soft tissue defects and serve as a basis for directed approaches towards the generation of clinically applicable soft tissue substitutes.},
  subject      = {Tissue Engineering},
  language  = {en}
}
@phdthesis{Ahmed2014,
  author    = {Ahmed, Arabe},
  title     = {Assessing particle deposition in a representative in vitro model of the rat respiratory tract},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-104912},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2014},
  abstract  = {The aim of this thesis was to develop an in vitro model (IVR) of the rat lung for the purpose of investigating the deposition of drug particles in the rat airways. The model attempted to account for the affect of drug product characteristics and physiological parameters on deposition in the lungs. In addition, the model outputs were compared with in vivo lung deposition results from live rats and in silico predictions using published computer model of lung deposition in pre-clinical species. Initial work focussed on developing an aerosol exposure system capable of dosing small rodent to a range of airborne test materials. The system consists of two main parts; a fluidised bed aerosol generator and connection of the generator output to a nose only exposure chamber capable of accommodating 12 small animals in a single layer. In addition, an aerodynamic particle spectrometer (APS) was installed for continuously measuring the size distribution and airborne concentration of aerosol particles generated in the exposure chamber. System validation showed acceptable degree of variation of the test material tested, Fluorescent Microspheres (FMS) throughout the exposure chamber (CV < 15.0\%). Particle size (MMAD ± GSD) using the APS was shown to be stable throughout the exposure periods. The IVR model developed in this project was based on a number of euthanased (n=7), female Sprague-Dawley rats (weight: 372 ± 56 g), which underwent high-resolution micro-CT scans. The physical model consisted of five sub sections; Extra-Thoracic region containing the snout and nasophyarynx, trachea-bronchial region containing the trachea, bronchi, and bronchioles. All sections of the model were attached to one another in numerical order and housed within a containment unit. At the rear end of the cast, a flexible diaphragm was attached in order to collect the fraction of inhaled particles exiting the TB section and possibly reaching the lung, referred to as the Post-TB section. A study was conducted to assess the influence of inhalation parameters such as the breathing frequency and tidal volume on total and regional dose distribution using FMS as test material. The major finding of this study was the demonstration of the model sensitivity to changes in breathing parameters especially respiratory frequency, where the data showed increased deposition in the peripheral regions of the model with decreased respiratory frequency. Other studies assessed the effect of particle characteristics on deposition on the IVR model, such as particle size, dose increase and formulation changes. The results assessing particle size effect showed a slightly higher deposition levels for the 4µm sized particles versus 2µm sized particles in the head region; 90.8 ± 3.6\% and 88.2 ± 6.6\%. However, this difference did not reach statistical significance (P> 0.05) probably due to the polydispersity of aerosolised FMS particles. In addition, the regional deposition analysis showed an increased lung peripheral deposition with the smaller particles. In addition, the model was shown to be sensitive to changes in formulation composition mediated by inclusion of MgSt. The next stage of work was to validate the model in terms of comparison with lung deposition for in vivo rats. For lung deposition comparison, the absolute amount deposited in the IVR lung model (expressed as µg/kg) was shown to have a reasonably strong correlation with in vivo lung concentration measures (µg/kg); R2= 0.66, P < 0.05. Compounds were predicted well and within 2-folds of the measured lung deposition values. However, knowing the variability in biological systems and the multiple components required to estimate lung doses, predictions within 2-fold of the measured values would seem reasonable In terms of comparison with in silico model predictions using MPPD, similar deposition levels were noted between the two models, particularly when the data was expressed as percentage of total particles inhaled. The data showed the highest deposition levels were noted in the head region (> 80\%) and less than 5.0\% deposition for the peripheral lung fractions. With regards to using the IVR model to assess the relationship between dose, particle size and efficacy, an in vivo study using FP with different particle sizes (2.0 and 4.0 µm) but same doses ( 100 and 1000 µg/kg). This study demonstrated that exposure of rat to FP powder resulted in a dose-dependent inhibition of neutrophils in BAL fluids. However, a clear difference in neutrophils suppression was demonstrated for equivalent doses but different particle sizes of FP, where the smaller FP particles (2.0 µm) induced a greater level of neutrophils suppression in comparison with larger FP particles (4.0 µm). In addition, a reasonably good correlation for the relationship between lung deposition in the IVR model and a neutrophils suppression level was demonstrated. Furthermore this data support the hypothesis that regional deposition is an important determinant in efficacy. Therefore, this suggests that the IVR model may be a useful as a tool to describe in vivo efficacy with in vitro data. However, further studies should be conducted to evaluate the validity of this model and relationship. The IVR model has a number of important limitations. First, the model is based on scans up to generation four of the rat respiratory tract as this represented the limits of the micro-CT scanning technology at the time of this study. Therefore deposition in the deeper region of the lung may not be reflected precisely in the IVR model. Second, the regional deposition data generated using the model tended to show an overestimation of deposition in head region and an underestimation of deposition in the peripheral regions of the lung, in comparison with in vivo lung deposition data. Third, the current model does not take into account lung clearance. However, the amount of the drug present in the in vivo lungs is dependent on numerous physiological processes such as dissolution, passive or active absorption into the systemic circulation, binding to lung tissue and mucociliary clearance. Consequently, the results generated using this IVR model for drug molecules with high lung clearance rate should be treated with some caution. Future work extending this research could go in a number of directions. In this research, a representative model of the rat respiratory tract was constructed from analysis of imaging data from a number of euthanised Sprague-Dawley rats. This model represented the "average respiratory tract" in terms of dimensions of Sprague-Dawley rats. However, there is considerable variability in the airway dimensions between rats. This variability encompasses a number of factors such as the strains of rats, sex and age, and disease state. Thus, it may be possible to produce a small number of airway models to represent small and large rats and scaled to represent the extrathoracic and peripheral regions based on literature reports of their dimensions in different rat populations. This approach will then enable the effect of intersubject airway dimensions for different rat populations on aerosol deposition to be thoroughly examined. In addition, due to the limitation of the micro-CT technology used to construct the physical IVR model, detailed morphology only up to generation 4 were captured. However, recent advances in MRI technology, such as the use of in situ-MRI based scanning technology have enabled rat airway morphometry to be extended to 16 airway generation. This coupled with improvements in the resolutions of rapid-prototyping process means it may be possible to construct a rat model that reflects the in vivo lung morphology more accurately, and thus enable greater understanding of the link between aerosol deposition and airway geometry. In conclusion, a model cast of the rat lung was developed and validated to allow the deposition of inhaled particles in the rat lung to be investigated. The model may be used to estimate the lung concentration in vivo rats in preference to exposure concentration measurements based on filter samples which have been shown to be a poor indicator of the lung concentration immediately after exposure. In addition, the model has the potential to be used along with live rats in an inhalation rig in pulmonary pharmaceutics research and may facilitate in development of inhaled formulations to target specific regions within the lung as well as screening of inhaled drugs in preclinical setting.},
  subject      = {Ratte},
  language  = {en}
}
@phdthesis{Jarzina2022,
  author    = {Jarzina, Sebastian Oskar},
  title     = {Assessment of systemic toxicity in vitro using the Adverse Outcome Pathway (AOP) concept: nephrotoxicity due to receptor-mediated endocytosis and lysosomal overload and inhibition of mtDNA polymerase-ɣ as case studies},
  doi       = {10.25972/OPUS-26484},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-264842},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {The US National Research Council (NRC) report "Toxicity Testing in the 21st Century: A Vision and a strategy (Tox21)", published in 2007, calls for a complete paradigm shift in tox-icity testing. A central aspect of the proposed strategy includes the transition from apical end-points in in vivo studies to more mechanistically based in vitro tests. To support and facilitate the transition and paradigm shift in toxicity testing, the Adverse Outcome Pathway (AOP) concept is widely recognized as a pragmatic tool. As case studies, the AOP concept was ap-plied in this work to develop AOPs for proximal tubule injuries initiated by Receptor-mediated endocytosis and lysosomal overload and Inhibition of mtDNA polymerase-. These AOPs were used as a mechanistic basis for the development of in vitro assays for each key event (KE). To experimentally support the developed in vitro assays, proximal tubule cells from rat (NRK-52E) and human (RPTEC/TERT1) were treated with model compounds. To measure the dis-turbance of lysosomal function in the AOP - Receptor-mediated endocytosis and lysosomal overload, polymyxin antibiotics (polymyxin B, colistin, polymyxin B nonapeptide) were used as model compounds. Altered expression of lysosomal associated membrane protein 1/2 (LAMP-1/2) (KE1) and cathepsin D release from lysosomes (KE2) were determined by im-munofluorescence, while cytotoxicity (KE3) was measured using the CellTiter-Glo® cell via-bility assay. Importantly, significant differences in polymyxin uptake and susceptibility be-tween cell lines were observed, underlining the importance of in vitro biokinetics to determine an appropriate in vitro point of departure (PoD) for risk assessment. Compared to the in vivo situation, distinct expression of relevant transporters such as megalin and cubilin on mRNA and protein level in the used cell lines (RPTEC/TERT1 and NRK-52E) could not be con-firmed, making integration of quantitative in vitro to in vivo extrapolations (QIVIVE) neces-sary. Integration of QIVIVE by project partners of the University of Utrecht showed an im-provement in the modelled biokinetic data for polymyxin B. To assess the first key event, (KE1) Depletion of mitochondrial DNA, in the AOP - Inhibition of mtDNA polymerase-, a RT-qPCR method was used to determine the mtDNA copy number in cells treated with mod-el compounds (adefovir, cidofovir, tenofovir, adefovir dipivoxil, tenofovir disoproxil fumarate). Mitochondrial toxicity (KE2) was measured by project partners using the high-content imaging technique and MitoTracker® whereas cytotoxicity (KE3) was determined by CellTiter-Glo® cell viability assay. In contrast to the mechanistic hypothesis underlying the AOP - Inhibition of mtDNA polymerase-, treatment with model compounds for 24 h resulted in an increase rather than a decrease in mtDNA copy number (KE1). Only minor effects on mitochondrial toxicity (KE2) and cytotoxicity (KE3) were observed. Treatment of RPT-EC/TERT1 cells for 14 days showed only a slight decrease in mtDNA copy number after treatment with adefovir dipivoxil and tenofovir disoproxil fumarate, underscoring some of the limitations of short-term in vitro systems. To obtain a first estimation for risk assessment based on in vitro data, potential points of departure (PoD) for each KE were calculated from the obtained in vitro data. The most common PoDs were calculated such as the effect concentra-tion at which 10 \% or 20_\% effect was measured (EC10, EC20), the highest no observed effect concentration (NOEC), the lowest observed effect concentration (LOEC), the benchmark 10 \% (lower / upper) concentrations (BMC10, BMCL10, BMCU10) and a modelled non-toxic con-centration (NtC). These PoDs were then compared with serum and tissue concentrations de-termined from in vivo studies after treatment with therapeutic / supratherapeutic doses of the respective drugs in order to obtain a first estimate of risk based on in vitro data. In addition, AOPs were used to test whether the quantitative key event relationships between key events allow prediction of downstream effects and effects on the adverse outcome (AO) based on measurements of an early key event. Predictions of cytotoxicity from the mathematical rela-tionships showed good concordance with measured cytotoxicity after treatment with colistin and polymyxin b nonapeptide. The work also revealed uncertainties and limitations of the ap-plied strategy, which have a significant impact on the prediction and on a risk assessment based on in vitro results.},
  language  = {en}
}
@phdthesis{Englbrecht2014,
  author    = {Englbrecht, Clemens},
  title     = {Biochemische Rekonstitution und funktionelle Charakterisierung der Zusammenlagerungsmaschinerie spleißosomaler U snRNPs},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-98168},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2014},
  abstract  = {Das Spleißen von pr{\"a}-mRNAs stellt in der Expression eukaryontischer Gene einen essentiellen Reifungsschritt dar. Erst durch das exakte Entfernen von nicht-kodierenden Introns und Verbinden der kodierenden Exons kann die genetische Information am Ribosom in funktionelle Proteine umgesetzt werden. Spleißen wird durch das Spleißosom katalysiert, welches sich aus den small nuclear ribonucleoproteins (snRNPs) U1, U2, U4, U5 und U6 und einer großen Anzahl weiterer Proteinfaktoren zusammensetzt. Die snRNPs bestehen aus einer Uridin-reichen snRNA, spezifischen und generellen (Sm-)Proteinen. Die Sm-Proteine B/B`, D1, D2, D3, E, F, und G bilden einen heptameren Ring um die sog. Sm-Bindungsstelle der snRNAs. W{\"a}hrend die Zusammenlagerung von Sm-Proteinen mit der RNA in vitro spontan ablaufen kann, wird dieser Prozess in vivo von zwei makromolekularen Proteinkomplexen assistiert, die als PRMT5- bzw. SMN-Komplex bezeichnet werden. Der PRMT5-Komplex (bestehend aus PRMT5, WD45 und pICln) agiert in der fr{\"u}hen Phase der Zusammenlagerung. Seine Hauptfunktion ist die symmetrische Dimethylierung der Sm-Proteine und die Stabilisierung von Sm-Proteinkomplexen durch das Chaperon pICln in zwei Intermediaten. Einhergehend mit dieser Aktivit{\"a}t werden auch Aggregation bzw. unspezifische Wechselwirkungen der Sm-Proteine mit RNAs verhindert. In der sp{\"a}ten Phase der Zusammenlagerung l{\"o}st der SMN-Komplex (bestehend aus SMN, Gemin2-8 und unrip) pICln-Intermediate auf, wobei dieser die Sm-Proteine en bloc {\"u}bernimmt und sie auf die snRNA {\"u}bertr{\"a}gt. W{\"a}hrend dieser Reaktion wird pICln aus den Komplexen verdr{\"a}ngt. Ein Fehlen des SMN-Proteins, einer Schl{\"u}sselkomponente des SMN-Komplexes, f{\"u}hrt zur autosomal rezessiven Erbkrankheit `Spinale Muskelatrophie` (SMA) wobei der Schweregrad der Krankheit invers mit der Menge an funktionellem SMN-Protein korreliert. Es wird vermutet, dass eine gest{\"o}rte snRNP-Biogenese die Ursache der SMA ist. In der vorliegenden Arbeit sollte die U snRNP-Zusammenlagerungsmaschinerie aus rekombinanten Bausteinen rekonstituiert werden und so funktionellen und strukturellen Studien zug{\"a}nglich gemacht werden. Folgende Resultate wurden in dieser Arbeit erhalten: 1) Im ersten Teil der Arbeit wurde eine experimentelle Strategie etabliert, welche die Rekonstitution des humanen SMN-Komplexes aus rekombinanten Untereinheiten erlaubte. Entscheidend hierf{\"u}r war die Definition von Subkomplexen aufgrund einer Protein-Interaktionskarte. Die Subkomplexe konnten separat hergestellt und anschließend zum Gesamtkomplex vereinigt werden. 2) Die erfolgreiche Etablierung eines rekonstitutiven Systems erlaubte eine detaillierte biochemische Charakterisierung des SMN-Komplexes. Es konnte gezeigt werden, dass der rekombinante Komplex alle f{\"u}r die Biogenese von U snRNPs n{\"o}tigen Schritte bewerkstelligen konnte. Dies schließt sowohl die {\"U}bernahme der Sm-Proteine aus den pICln-Intermediaten als auch das Verdr{\"a}ngen des Chaperons pICln und die {\"U}bertragung der Sm-Proteine auf die snRNAs ein. 3) Durch die Reduzierung des SMN-Gesamtkomplexes um Gemin3-5 auf einen SMN-Pentamer konnte dieser als ein funktioneller Kernbereich identifiziert werden, der die einzelnen Schritte der U snRNP-Biogenese vergleichbar mit dem gesamten Komplex bewerkstelligen konnte. Zudem agierte dieser reduzierte Komplex als notwendiger und ausreichender Spezifit{\"a}tsfaktor der RNP-Zusammenlagerung. 4) Das rekombinante System erm{\"o}glichte erstmals SMN-Komplexe mit SMA-pathogenen Mutationen herzustellen und einer eingehenden funktionellen und strukturellen Untersuchung zu unterziehen. Die detaillierte Analyse der SMA-verursachenden Punktmutation SMN(E134K) offenbarte spezifische Defekte im Zusammenlagerungsprozess und damit Einblicke in die Pathophysiologie der Krankheit. Mit der im Rahmen dieser Arbeit etablierten Rekonstitution des rekombinanten SMN-Komplexes wurde die Grundlage f{\"u}r die detaillierte biochemische und strukturbiologische Untersuchung der Zusammenlagerungsmaschinerie spleißosomaler U snRNPs gelegt. Dieses experimentelle System wird auch bei der Aufdeckung der biochemischen Defekte hilfreich sein, die zur neuromuskul{\"a}ren Krankheit SMA f{\"u}hren.},
  subject      = {Small nuclear RNP},
  language  = {de}
}
@phdthesis{Meininger2022,
  author    = {Meininger, Markus},
  title     = {Calcium hydroxide as antibacterial implant coating},
  doi       = {10.25972/OPUS-26112},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-261122},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {In modern medicine hip and knee joint replacement are common surgical procedures. However, about 11 \% of hip implants and about 7 \% of knee implants need re-operations. The comparison of implant registers revealed two major indications for re-operations: aseptic loosening and implant infections, that both severely impact the patients' health and are an economic burden for the health care system. To address these problems, a calcium hydroxide coating on titanium was investigated in this thesis. Calcium hydroxide is a well-known antibacterial agent and used with success in dentistry. The coatings were applied with electrochemically assisted deposition, a versatile tool that combines easiness of process with the ability to coat complex geometries homogeneously. The pH-gradient during coating was investigated and showed the surface confinement of the coating process. Surface pre-treatment altered the surface morphology and chemistry of the titanium substrates and was shown to affect the morphology of the calcium hydroxide coatings. The influence of the coating parameters stirring speed and current pulsing were examined in various configurations and combinations and could also affect the surface morphology. A change in surface morphology results in a changed adhesion and behavior of cells and bacteria. Thus, the parameters surface pre-treatment, stirring speed and current pulsing presented a toolset for tailoring cellular response and antibacterial properties. Microbiological tests with S. aureus and S. epidermidis were performed to test the time-dependent antibacterial activity of the calcium hydroxide coatings. A reduction of both strains could be achieved for 13 h, which makes calcium hydroxide a promising antibacterial coating. To give insight into biofilm growth, a protocol for biofilm staining was investigated on titanium disks with S. aureus and S. epidermidis. Biofilm growth could be detected after 5 days of bacterial incubation, which was much earlier than the 3 weeks that are currently assumed in medical treatment. Thus, it should be considered to treat infections as if a biofilm were present from day 5 on. The ephemeral antibacterial properties of calcium hydroxide were further enhanced and prolonged with the addition of silver and copper ions. Both ionic modifications significantly enhanced the bactericidal potential. The copper modification showed higher antibacterial effects than the silver modification and had a higher cytocompatibility which was comparable to the pure calcium hydroxide coating. Thus, copper ions are an auspicious option to enhance the antibacterial properties. Calcium hydroxide coatings presented in this thesis have promising antibacterial properties and can easily be applied to complex geometries, thus they are a step in fighting aseptic loosening and implant infections.},
  subject      = {Calciumhydroxid},
  language  = {en}
}
@phdthesis{Steinbacher2015,
  author    = {Steinbacher, Andreas Edgar},
  title     = {Circular dichroism and accumulative polarimetry of chiral femtochemistry},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-116500},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2015},
  abstract  = {This work brings forward successful implementations of ultrafast chirality-sensitive spectroscopic techniques by probing circular dichroism (CD) or optical rotation dispersion (ORD). Furthermore, also first steps towards chiral quantum control, i.e., the selective variation of the chiral properties of molecules with the help of coherent light, are presented. In the case of CD probing, a setup capable of mirroring an arbitrary polarization state of an ultrashort laser pulse was developed. Hence, by passing a left-circularly polarized laser pulse through this setup a right-circularly polarized laser pulse is generated. These two pulse enantiomers can be utilized as probe pulses in a pump--probe CD experiment. Besides CD spectroscopy, it can be utilized for anisotropy or ellipsometry spectroscopy also. Within this thesis, the approach is used to elucidate the photochemistry of hemoglobin, the oxygen transporting protein in mammalian blood. The oxygen loss can be triggered with laser pulses as well, and the results of the time-resolved CD experiment suggest a cascade-like relaxation, probably through different spin states, of the metallo-porphyrins in hemoglobin. The ORD probing was realized via the combination of common-path optical heterodyne interferometric polarimetry and accumulative femtosecond spectroscopy. Within this setup, on the one hand the applicability of this approach for ultrafast studies was demonstrated explicitly. On the other hand, the discrimination between an achiral and a racemic solution without prior spatial separation was realized. This was achieved by inducing an enantiomeric excess via polarized femtosecond laser pulses and following its evolution with the developed polarimeter. Hence, chiral selectivity was already achieved with this method which can be turned into chiral control if the polarized laser pulses are optimized to steer an enhancement of the enantiomeric excess. Furthermore, within this thesis, theoretical prerequisites for anisotropy-free pump--probe experiments with arbitrary polarized laser pulses were derived. Due to the small magnitude of optical chirality-sensitve signals, these results are important for any pump--probe chiral spectroscopy, like the CD probing presented in this thesis. Moreover, since for chiral quantum control the variation of the molecular structure is necessary, the knowledge about rearrangement reactions triggered by photons is necessary. Hence, within this thesis the ultrafast Wolff rearrangement of an α-diazocarbonyl was investigated via ultrafast photofragment ion spectroscopy in the gas phase. Though the compound is not chiral, the knowledge about the exact reaction mechanism is beneficial for future studies of chiral compounds.},
  subject      = {Ultrakurzzeitspektroskopie},
  language  = {en}
}
@unpublished{WohlgemuthMiyazakiTsukadaetal.2017,
  author    = {Wohlgemuth, Matthias and Miyazaki, Mitsuhiko and Tsukada, Kohei and Weiler, Martin and Dopfer, Otto and Fujii, Masaaki and Mitrić, Roland},
  title     = {Deciphering environment effects in peptide bond solvation dynamics by experiment and theory},
  series = {Physical Chemistry Chemical Physics},
  journal   = {Physical Chemistry Chemical Physics},
  doi       = {10.1039/C7CP03992A},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-159483},
  year      = {2017},
  abstract  = {Most proteins work in aqueous solution and the interaction with water strongly affects their structure and function. However, experimentally the motion of a specific single water molecule is difficult to trace by conventional methods, because they average over the heterogeneous solvation structure of bulk water surrounding the protein. Here, we provide a detailed atomistic picture of the water rearrangement dynamics around the -CONH- peptide linkage in the two model systems formanilide and acetanilide, which simply differ by the presence of a methyl group at the peptide linkage. The combination of picosecond pump-probe time-resolved infrared spectroscopy and molecular dynamics simulations demonstrates that the solvation dynamics at the molecular level is strongly influenced by this small structural difference. The effective timescales for solvent migration triggered by ionization are mainly controlled by the efficiency of the kinetic energy redistribution rather than the shape of the potential energy surface. This approach provides a fundamental understanding of protein hydration and may help to design functional molecules in solution with tailored properties.},
  language  = {en}
}
@phdthesis{HorvatCsotigebHorvat2021,
  author    = {Horvat-Cs{\´o}ti [geb. Horvat], Sonja},
  title     = {Development of Nanocarriers for Treatment and Diagnostics of Aspergillosis},
  doi       = {10.25972/OPUS-23821},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-238218},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {This thesis aimed to evaluate the possibility to use nanoparticles as antifungal drug carriers as well as their potential application in screening and diagnostics of invasive aspergillosis. The interaction of nanogels, superparamagnetic iron oxide nanoparticles (SPIOs) and gold nanoparticles (GNP) with fungal-specific polysaccharides, cells and biofilms was investigated. Firstly, it was evaluated how the charge of nanogels influence their interaction with fungal cells. Linear poly(glycidol)s (pG) and poly(2-methyl-2-oxazoline) (pMOx) polymers were synthesized and further functionalized with thiol groups for preparation of redox responsive nanogels. Results showed that negatively charged nanogels were internalized by the fungi to a much greater extent than positively charged ones. Furthermore, it was investigated how amphiphilicity of polymers used for preparation of nanogels influences nanogel-fungi interaction. It was concluded that nanogels prepared from polymers with degree of functionalization of 10\% had the strongest interaction, regardless the length of the alkyl chain. Moreover, amphotericin B-loaded nanogels had a higher antifungal effect and lower toxicity towards mammalian cells than the free drug. In addition, inverse nanoprecipitation of thiol functionalized pGs was shown to be successful for preparation of nanogels with narrow size distribution. It was also demonstrated that crosslinking of the polymeric coating in hydrogel-like network with thiol functionalized pGs improved the SPIOs imaging performance. Finally, it was investigated whether GNPs could be used as model particles for the assessment of targeting to fungi. Fc dectin-1 was conjugated covalently to GNPs decorated with pGs, and binding affinity towards β-glucans was tested by surface plasmon resonance. In summary, this thesis demonstrated evidence for the potential of pG nanogels and pG coated nanoparticles for antifungal therapy and diagnostics of fungal infections caused by A. fumigatus.},
  subject      = {Therapeutisches System},
  language  = {en}
}
@phdthesis{Kaiser2014,
  author    = {Kaiser, Conrad},
  title     = {Donor-Bridge-Acceptor Systems with Varying Bridge Units for the Investigation of Intramolecular and Intermolecular Electron Transfer Processes},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-97614},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2014},
  abstract  = {Within this study, the influence of the energetics of the bridge unit on electron transfer (ET) in an electrode-bridge-donor system was investigated in a monolayer environment. This was realized by specifically designing molecules containing ferrocene carboxylic ester donors and hydroquinone derivatives as bridge units and by using a gold electrode as acceptor. The energetics of the hydroquinone derivatives was adjusted by synthetically varying its substituents with the intention of changing the ET speed and mechanisms. Thereby the choice of the substituents was based on the literature known half-wave potentials of similar solvated hydroquinone derivatives and successively confirming them by conducting cyclic voltammetry on the actual bridge units synthesized. Then, a synthetic pathway, which accommodated the limited stability of the integrated terminal ferrocene carbon acid ester, was developed and successfully employed. This was followed by developing a procedure for preparing very dense and highly ordered monolayers from the target molecules on self-made gold microelectrodes. For the electrochemical investigations, several electrolyte solutions were tested until one, which ensured low susceptibility of the characterization setup towards slight changes of the electrode arrangement and measurement parameters while ensuring sufficient stability of the monolayers, was found. Furthermore, a new, commercially available potentiostat was established for the impedance measurements, which reduced the stress on the monolayers during the electrochemical characterizations in comparison to the equipment used in many former studies. Regarding the determination of the ET rates, the data analysis protocol for the impedance measurements developed by Creager et al. was slightly adapted to allow analysis of the investigated monolayers despite their non-ideal behavior. In addition, the influence of changes to the electrical parameters of the impedance scans was investigated to minimize the error in the acquired data. The electrochemical analysis of the monolayers by conducting cyclic voltammetry on MA, MB and MC prepared from A, B and C confirmed the accomplishment of near ideal surface coverage and exceptionally high order. The surface coverages of MB and MC were, probably due to the space filled by the substituents on their bridge units, slightly lower than those of MA. Furthermore, the shape of the redox waves of the ferrocene carboxylic acid redox center in the voltammogram of MA showed a broadening and a shift towards higher potentials, which was assigned to electrostatic interference of oxidized terminal redox centers due to the especially dense packing. However, in the voltammogram of MB, no sharp redox waves of the bridge units, as predicted by the analysis of preliminary monolayers of the same type with low surface coverage, were present. This was attributed to the different and varying microenvironment of the bridge units deeply embedded within high-density monolayers. In detail, the different degree of shielding of each individual bridge unit from counter ions and solvent molecules probably resulted in the half wave potential being shifted to varying higher potentials, thus preventing the formation of sharp redox waves. In addition, electrostatic effects of oxidized bridge units could have enhanced this effect. This leads to the conclusion that the half-wave potentials of fully solvated bridge units determined by the cyclic voltammetry are not suited to predict the energetics of the oxidized bridge states embedded within the prepared high density monolayers. Finally, the monolayers were successfully analyzed by impedance spectroscopy, which showed that the ET rate of MA is slightly higher than that of MB, and both are higher than that of MC. All of the values were, according to literature, in the expected region considering the length and degree of conjugation of the backbone. However, this picture is relativized when considering the targeted energetic alignment of the bridge units. According to the predicted very small energy gap between the oxidized states of the donor and the bridge unit in MB, a domination of the hopping mechanism should have led to a several orders of magnitude higher ET rate than in MA and MC. That this was not the case was attributed to the underestimation of the energy of the oxidized bridge states by utilizing cyclic voltammetry of the fully solvated bridge units (see above). According to the small differences of the ET rates the superexchange process was assumed to be the dominating mechanism not only in MA and MC but also in MB. However, even when shifted, the predicted energetic order of the oxidized bridge states should have led to a moderately decreasing ET rate from MB over MA to MC. The reason for the actual ET rate in MA being slightly higher than in MB might be found in the electrostatic interference of the terminal redox centers in MA (see above). In conclusion, the targeted model systems were prepared and the ET rates were successfully determined. However, the problems concerning the relative energetic positioning of the involved states within the dense monolayers prevented the specific alteration of the speed and mechanism of the ET. The reason for this can be probably found in the high density and order of the monolayers prepared within this work, which hamper the intrusion of the components of the electrolyte solutions. This various degree of stabilization for the individual bridge units by counter ions and solvent molecules leads to the energy of the oxidized bridge states being splitted and shifted towards higher potentials with respect to fully solvated bridge units. This effect might be further enhanced by electrostatics of neighboring already oxidized bridge states. All this makes the predetermination of the energetics of the embedded bridge units extremely difficult. On one hand, this behavior can be considered an obstacle and could probably be circumvented by designing molecules with bulky anchor groups and rigid molecular backbones, which would ensure perpendicular arrangement to the surface and full exposure of the bridge and terminal redox centers to the solvent molecules and counter ions. On the other hand, monolayers which completely embed integral redox centers might open up the opportunity to study the effects of microenvironments similar to those in solid state materials. Regarding mixed valence compounds, the present study focuses on bistriarylamine radical cation F∙+, which contains the [3.3]paracyclophane bridge unit. The results were compared to the, except for the bridge units, identical literature known compounds G∙+ and N∙+ with [2.2]paracyclophane and p-xylene bridges respectively. This led to the conclusion that slightly different bridge units can induce substantial changes to the internal reorganization energy. This is especially noteworthy since it is usually believed that structural adaption limited to the redox centers taking part in the charge transfer dominates the internal reorganization energy. Furthermore, the application of the two-state Mulliken-Hush approach shows that compounds F∙+ and G∙+ have near identical couplings and similar thermal barriers. Confirmation of the latter finding as well as near identical thermal electron transfer rates for both compounds were provided via a cooperation project by Grampp et al. in which these values were directly extracted from temperature dependent electron paramagnetic resonance measurements. These results are quite unexpected since the "through-space" distances of the stacked pi-systems in the paracyclophane bridges differ significantly. They are well within the sum of the van der Waals radii in G∙+ and barely within them in compound F∙+. In addition, these findings weaken the common assumption of the ethylene bridges in G∙+ substantially adding to the electronic coupling, since then, in F∙+, due to its propylene linkers, the coupling should be substantially reduced. Finally, relying on the fact that the electronic couplings are only three times higher and the thermal electron transfer rates are only one order of magnitude higher for N∙+ than for compounds F∙+ and G∙+ shows that intermolecular electron transfer in solid state materials can remain efficient, if the interacting pi-systems stay within the sum of van der Waals radii of their carbons. Concerning the donor-acceptor dyads, the current investigation centers on triarylamine-cyclophane-naphtalene diimide (TAA-CP-NDI) compounds which display almost complete photoinduced charge separation. Furthermore, their singlet charge separated states show lifetimes of hundreds of nanoseconds, which is rarely found in such simple dyads. In the present case they can be attributed to the particular amount of electronic coupling V (on the order of 100 cm^-1), which is brought about by incorporation of the smallest model systems for pi-stacks, the CPs, together with the nodes on the NDI lowest unoccupied molecular orbital, which electronically decouples the central NDI from its nitrogen substituents. In agreement with studies of [2.2]- and [3.3]paracyclophane bridged mixed valence compounds (see above), the cycolphane bridged dyads show very similar electronic coupling when dealing with ground state processes like charge recombination. However, when investigating excited state processes, like charge separation in the TAA-CP-NDI dyads, one has to bear in mind that the CP orbitals are involved in the formation of intermediate states that likely possess charge transfer character. In this case, the [2.2]paracyclophane bridge obviously induces a stronger coupling than the [3.3]paracyclophane. Another interesting property of the dyads studied here is the substantial population of the triplet charge separated (CS) state of ca. one third regarding both CS states, which is brought about by singlet-triplet interconversion from the singlet CS state. Thus, the triplet CS state with a lifetime of several microseconds acts as a kind of buffer for the CS state before recombining to the ground state and, thus, leads to distinctly prolonged overall lifetimes of the charge separated states. Thus it can be concluded that the intersystem crossing and charge recombination (CR) processes of the CS states are governed by a delicate balance of a large electronic coupling V and a large exchange interaction 2J (both with regard to systems containing a through-space pathway). The latter appears to be induced by second order interaction with a local triplet state lying close in energy to the CS state. This balance results in slow CR- and singlet-triplet- interconversion rates, which differ only by one order of magnitude. Compared to the many NDI containing dyads studied so far, these features of the dyads studied here are, to the best of our knowledge, unique. Especially the combination of high quantum yield of charge separation, long lifetimes and high energy of the charge separated state make the investigated systems interesting for practical applications. Furthermore, the presented unraveling of the underlying mechanisms is of substantial value for the future design of dyads for practical applications regarding the implementation and adjustment of these favorable properties.},
  subject      = {Elektronentransfer},
  language  = {en}
}
@phdthesis{He2024,
  author    = {He, Feng},
  title     = {Drug Discovery based on Oxidative Stress and HDAC6 for Treatment of Neurodegenerative Diseases},
  doi       = {10.25972/OPUS-25349},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-253497},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {Most antioxidants reported so far only achieved limited success in AD clinical trials. Growing evidences suggest that merely targeting oxidative stress will not be sufficient to fight AD. While multi-target directed ligands could synergistically modulate different steps in the neurodegenerative process, offering a promising potential for treatment of this complex disease. Fifteen target compounds have been designed by merging melatonin and ferulic acid into the cap group of a tertiary amide HDAC6 inhibitor. Compound 10b was screened as the best hybrid molecule exhibit potent HDAC6 inhibition and potent antioxidant capacity. Compound 10b also alleviated LPS-induced microglia inflammation and led to a switch from neurotoxic M1 to the neuroprotective M2 microglial phenotype. Moreover, compound 10b show pronounced attenuation of spatial working memory and long-term memory damage in an in vivo AD mouse model. Compound 10b can be a potentially effective drug candidate for treatment of AD and its druggability worth to be further studied. We have designed ten novel neuroprotectants by hybridizing with several common antioxidants, including ferulic acid, melatonin, lipoic acid, and trolox. The trolox hybrid compound exhibited the most potent neuroprotective effects in multiple neuroprotection assays. Besides, we identified the synergistic effects between trolox and vitamin K derivative, and our trolox hybrid compound showed comparable neuroprotection with the mixture of trolox and vitamin K derivative. We have designed and synthesized 24 quinone derivatives based on five kinds of different quinones including ubiquinone, 2,3,5-trimethyl-1,4-benzoquinone, memoquin, thymoquinone, and anthraquinone. Trimethylbenzoquinone and thymoquinone derivatives showed more potent neuroprotection than other quinones in oxytosis assay. Therefore, trimethylbenzoquinone and thymoquinone derivatives can be used as lead compounds for further mechanism study and drug discovery for treatment of neurodegenerative disease. We designed a series of photoswitchable HDAC inhibitors, which could be effective molecular tools due to the high spatial and temporal resolution. In total 23 target compounds were synthesized and photophysicochemically characterized. Azoquinoline-based compounds possess more thermally stable cis-isomers in buffer solution, which were further tested in enzyme-based HDAC inhibition assay. However, none of those tested compounds show significant differences in activities between trans-isomers and corresponding cis-isomers.},
  subject      = {Alzheimerkrankheit},
  language  = {en}
}