@article{AndelovicWinterKampfetal.2021, author = {Andelovic, Kristina and Winter, Patrick and Kampf, Thomas and Xu, Anton and Jakob, Peter Michael and Herold, Volker and Bauer, Wolfgang Rudolf and Zernecke, Alma}, title = {2D Projection Maps of WSS and OSI Reveal Distinct Spatiotemporal Changes in Hemodynamics in the Murine Aorta during Ageing and Atherosclerosis}, series = {Biomedicines}, volume = {9}, journal = {Biomedicines}, number = {12}, issn = {2227-9059}, doi = {10.3390/biomedicines9121856}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-252164}, year = {2021}, abstract = {Growth, ageing and atherosclerotic plaque development alter the biomechanical forces acting on the vessel wall. However, monitoring the detailed local changes in wall shear stress (WSS) at distinct sites of the murine aortic arch over time has been challenging. Here, we studied the temporal and spatial changes in flow, WSS, oscillatory shear index (OSI) and elastic properties of healthy wildtype (WT, n = 5) and atherosclerotic apolipoprotein E-deficient (Apoe\(^{-/-}\), n = 6) mice during ageing and atherosclerosis using high-resolution 4D flow magnetic resonance imaging (MRI). Spatially resolved 2D projection maps of WSS and OSI of the complete aortic arch were generated, allowing the pixel-wise statistical analysis of inter- and intragroup hemodynamic changes over time and local correlations between WSS, pulse wave velocity (PWV), plaque and vessel wall characteristics. The study revealed converse differences of local hemodynamic profiles in healthy WT and atherosclerotic Apoe\(^{-/-}\) mice, and we identified the circumferential WSS as potential marker of plaque size and composition in advanced atherosclerosis and the radial strain as a potential marker for vascular elasticity. Two-dimensional (2D) projection maps of WSS and OSI, including statistical analysis provide a powerful tool to monitor local aortic hemodynamics during ageing and atherosclerosis. The correlation of spatially resolved hemodynamics and plaque characteristics could significantly improve our understanding of the impact of hemodynamics on atherosclerosis, which may be key to understand plaque progression towards vulnerability.}, language = {en} } @phdthesis{Waeldchen2020, author = {W{\"a}ldchen, Felix}, title = {3D Single Molecule Imaging In Whole Cells Enabled By Lattice Light-Sheet Illumination}, doi = {10.25972/OPUS-20711}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-207111}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {Single molecule localization microscopy has seen a remarkable growth since its first experimental implementations about a decade ago. Despite its technical challenges, it is already widely used in medicine and biology and is valued as a unique tool to gain molecular information with high specificity. However, common illumination techniques do not allow the use of single molecule sensitive super-resolution microscopy techniques such as direct stochastic optical reconstruction microscopy (dSTORM) for whole cell imaging. In addition, they can potentially alter the quantitative information. In this thesis, I combine dSTORM imaging in three dimensions with lattice lightsheet illumination to gain quantitative molecular information from cells unperturbed by the illumination and cover slip effects. Lattice light-sheet illumination uses optical lattices for beam shaping to restrict the illumination to the detectable volume. I describe the theoretical background needed for both techniques and detail the experimental realization of the system as well as the software that I developed to efficiently evaluate the data. Eventually, I will present key datasets that demonstrate the capabilities of the developed microscope system with and without dSTORM. My main goal here was to use these techniques for imaging the neural cell adhesion molecule (NCAM, also known as CD56) in whole cells. NCAM is a plasma membrane receptor known to play a key role in biological processes such as memory and learning. Combining dSTORM and lattice light-sheet illumination enables the collection of quantitative data of the distribution of molecules across the whole plasma membrane, and shows an accumulation of NCAM at cell-cell interfaces. The low phototoxicity of lattice light-sheet illumination further allows for tracking individual NCAM dimers in living cells, showing a significant dependence of its mobility on the actin skeleton of the cell.}, subject = {Einzelmolek{\"u}lmikroskopie}, language = {en} } @phdthesis{Kuegel2015, author = {K{\"u}gel, Jens}, title = {3d-{\"U}bergangsmetallphthalocyanin-Molek{\"u}le auf Metalloberfl{\"a}chen: Der Einfluss der d-Orbitalbesetzung}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-121059}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Im Rahmen dieser Dissertation wird die Untersuchung von 3d-{\"U}bergangsmetallphthalocyanin- Molek{\"u}len ({\"U}MPc) - quadratisch-planaren organischen Molek{\"u}len, welche im Zentrum ein 3d-{\"U}bergangsmetallion besitzen - auf metallischen Oberfl{\"a}chen vorgestellt. Der Fokus dieser Arbeit liegt dabei auf dem Einfluss der d-Orbitalbesetzung auf die magnetischen, elektronischen und strukturellen Eigenschaften der adsorbierten Molek{\"u}le, die mit Hilfe der Rastertunnelmikroskopie und -spektroskopie charakterisiert wurden. Die gewonnen Ergebnisse werden zum Teil mit theoretischen Berechnungen analysiert und interpretiert. Die erste H{\"a}lfte der experimentellen Auswertung behandelt die Untersuchung dieser Molek{\"u}le auf Ag(001) in Hinblick auf die Existenz einer magnetischen Wechselwirkung, bei der ein unkompensiertes magnetisches Moment des Molek{\"u}ls durch die Substratelektronen abgeschirmt wird. Dieser Effekt wird als Kondo-Abschirmung bezeichnet und erzeugt in der Zustandsdichte des Molek{\"u}ls eine Resonanz am Fermi-Niveau. Die Messungen zeigen, dass diese Resonanz ausschließlich am Zentralion von MnPc vorgefunden wird, wohingegen sie bei allen anderen 3d-{\"U}bergangsmetallphthalocyanin-Molek{\"u}len, die eine h{\"o}here d-Orbitalbesetzung besitzen, nicht vorhanden ist. Anhand theoretischer Berechnungen kann die Ursache f{\"u}r dieses Verhalten darauf zur{\"u}ckgef{\"u}hrt werden, dass von allen d-Orbitalen einzig das dz2-Orbital mit dem Substrat geeignet hybridisiert, um eine Kondo-Abschirmung zu erzeugen. Da ausschließlich MnPc einen unkompensierten Spin in diesem Orbital besitzt, kann die An- bzw. Abwesenheit des Kondo-Effekts auf die unterschiedliche Besetzung des dz2-Orbitals zur{\"u}ckgef{\"u}hrt werden. Neben der eben erw{\"a}hnten Kondo-Resonanz ist bei MnPc ein weiteres Merkmal am Fermi- Niveau {\"u}berlagert. Durch die Analyse der r{\"a}umlichen Verteilung, den Vergleich mit anderen Molek{\"u}len und der Manipulation des MnPc-Molek{\"u}ls kann gezeigt werden, dass es sich bei diesem Merkmal um einen d-Orbitalzustand handelt. Die Manipulation des Molek{\"u}ls durch gezieltes Entfernen von Wasserstoffatomen erm{\"o}glicht dar{\"u}ber hinaus die St{\"a}rke der Kondo-Abschirmung zu beeinflussen. In der zweiten H{\"a}lfte der experimentellen Auswertung werden Molek{\"u}le auf bismutinduzierten Oberfl{\"a}chenlegierungen der Edelmetalle Cu(111) und Ag(111) untersucht. Diese Legierungen zeichnen sich durch einen ausgepr{\"a}gten Rashba-Effekt aus, der durch eine Aufspaltung der Parabeldispersion und Aufhebung der Spin-Entartung im zweidimensionalen Elektronengas der Oberfl{\"a}chenlegierung charakterisiert ist. Das Wachstumsverhalten von CuPc und MnPc auf diesen Oberfl{\"a}chen zeigt ein sehr gegens{\"a}tzliches Verhalten. W{\"a}hrend bei MnPc die Substrat-Molek{\"u}l-Wechselwirkung dominant ist, wodurch diese Molek{\"u}le immer einen festen Adsorptionsplatz auf der Oberfl{\"a}che besitzen, ist diese Wechselwirkung bei CuPc schwach ausgepr{\"a}gt. Aus diesem Grund wandern die CuPc-Molek{\"u}le zu den Stufenkanten und bilden Cluster. Das unterschiedliche Wachstumsverhalten der Molek{\"u}le l{\"a}sst sich auf die partiell-gef{\"u}llten d-Orbitale von MnPc zur{\"u}ckf{\"u}hren, die aus der Molek{\"u}lebene ragen, mit dem Substrat hybridisieren und damit das Molek{\"u}l an das Substrat binden. Bei CuPc hingegen sind diese d-Orbitale gef{\"u}llt und die Hybridisierung kann nicht stattfinden. Im letzten Abschnitt werden die elektronischen und magnetischen Eigenschaften von MnPc auf diesen Substraten behandelt, die einige Besonderheiten aufweisen. So bildet sich durch die Adsorption des Molek{\"u}ls auf den Oberfl{\"a}chen eine Grenzschichtresonanz aus, die eine partielle F{\"u}llung erkennen l{\"a}sst. Spektroskopiedaten, aufgenommen am Ort der Grenzschichtresonanz, weisen eine symmetrisch um das Fermi-Niveau aufgespaltene Resonanz auf. Die Intensit{\"a}t der unter- und oberhalb der Fermi-Energie befindlichen Resonanz zeigen dabei ein komplement{\"a}res Verhalten bzgl. der jeweiligen Lage auf der Grenzschichtresonanz: An den Orten, an denen die Resonanz unterhalb des Fermi-Niveaus ihre maximale Intensit{\"a}t besitzt, ist die Resonanz oberhalb des Fermi-Niveaus nicht vorhanden und umgekehrt. Diese experimentellen Beobachtungen werden mit einem Modellansatz erkl{\"a}rt, welcher die Wirkung eines effektiven Magnetfeldes und eine Spin-Filterung postuliert.}, subject = {Phthalocyanin}, language = {de} } @article{WiedenmannBocquillonDeaconetal.2016, author = {Wiedenmann, J. and Bocquillon, E. and Deacon, R.S. and Hartinger, S. and Herrmann, O. and Klapwijk, T.M. and Maier, L. and Ames, C. and Br{\"u}ne, C. and Gould, C. and Oiwa, A. and Ishibashi, K. and Tarucha, S. and Buhmann, H. and Molenkamp, L.W.}, title = {4π-periodic Josephson supercurrent in HgTe-based topological Josephson junctions}, series = {Nature Communications}, volume = {7}, journal = {Nature Communications}, doi = {10.1038/ncomms10303}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-175353}, year = {2016}, abstract = {The Josephson effect describes the generic appearance of a supercurrent in a weak link between two superconductors. Its exact physical nature deeply influences the properties of the supercurrent. In recent years, considerable efforts have focused on the coupling of superconductors to the surface states of a three-dimensional topological insulator. In such a material, an unconventional induced p-wave superconductivity should occur, with a doublet of topologically protected gapless Andreev bound states, whose energies vary 4π-periodically with the superconducting phase difference across the junction. In this article, we report the observation of an anomalous response to rf irradiation in a Josephson junction made of a HgTe weak link. The response is understood as due to a 4π-periodic contribution to the supercurrent, and its amplitude is compatible with the expected contribution of a gapless Andreev doublet. Our work opens the way to more elaborate experiments to investigate the induced superconductivity in a three-dimensional insulator.}, language = {en} } @phdthesis{Sturm2015, author = {Sturm, Volker J{\"o}rg Friedrich}, title = {\(^{19}F\) Magnetresonanztomographie zur Bildgebung von Infektionen im Zeitverlauf}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-122851}, school = {Universit{\"a}t W{\"u}rzburg}, pages = {114}, year = {2015}, abstract = {Im Rahmen dieser Arbeit sollten die M{\"o}glichkeiten der MR Tomographie erkundet werden bakterielle Infektionen im Zeitverlauf darzustellen. Genauer gesagt sollte das Potential der MR Tomographie anhand eines durch eine Infektion induzierten lokalisierten Abszesses unter Verwendung dreier unterschiedlicher MRT Methoden untersucht werden: Mittels nativem \(T_2\) Kontrast; der Verwendung von superparamagnetischen Eisenoxid Partieln (USPIO) als \(T_2^*\) Kontrastmittel; und dem Einsatz von Perfluorkarbonen (PFC) als \(^{19}F\) MRT Marker (siehe Kapitel 3). Wie erwartet f{\"u}hrte die durch die Infektion hervorgerufene Entz{\"u}ndung zu ver{\"a}nderten \(T_2\)-Zeiten, welche auf \(T_2\)-gewichteten MR Bildern eine Lokalisierung des Abszessbereiches erlauben. Jedoch eigneten sich diese Daten aufgrund der graduellen {\"A}nderung der \(T_2\)-Zeiten nicht, um eine klare Grenze zwischen Abszess und umliegendem Gewebe zu ziehen. Superparamagnetische Eisenoxidpartikel andererseit haben als MRT Kontrastmittel bereits in den letzten Jahren ihre F{\"a}higkeit unter Beweis gestellt Entz{\"u}ndungen [53, 58, 64] darzustellen. Die Anreicherung dieser Partikel am Rande des Abszesses [53], wie sie auch in unseren MR Daten zu beobachten war, erlaubte eine relativ scharfe Abgrenzung gegen{\"u}ber dem umgebenden Gewebe in der chronischen Phase der Infektion (Tag 9 p.i.). Hingegen gen{\"u}gte die nur sehr sp{\"a}rlichen Anreicherung von USPIO Partikeln in der akuten Phase der Infektion (Tag 3 p.i.) nicht f{\"u}r eine entsprechende Abgrenzung [58]. Aufgrund der sehr geringen biologischen H{\"a}ufigkeit und den sehr kurzen Relaxationszeiten von endogenem Fluor eignen sich Perfluorkarbone als Markersubstanz in der MR Tomographie von biologischen Systemen. Insbesondere da PFC Emulsionen durch phagozytierende Zellen aufgenommen werden und im Bereich von Entz{\"u}ndungen akkumulieren [30, 59]. In dieser Arbeit konnte anhand der erhaltenen MRT Daten eine Akkumulation von Perfluorkarbonen nicht nur in der chronischen Phase, sondern auch in der akuten Phase nachgewiesen werden. Diese Daten erlauben somit zu allen untersuchten Zeitpunkten eine Abgrenzung zwischen Infektion und umliegenden Gewebe. Aufgrund der besagten Vorteile wurden die Perfluorkarbone gew{\"a}hlt, um die M{\"o}glichkeiten der MR Tomographie zu testen, quantitative Informationen {\"u}ber die schwere der Infektion zu liefern. Als Referenz f{\"u}r die Bakterienbelastung wurden die Biolumineszenzbildgebung (BLI) [49, 50] und die Standardmethode zur Bestimmung der Bakterienbelastung cfu (koloniebildenden Einheiten) herangezogen. Eine Gegen{\"u}berstellung der zeitlichen Verl{\"a}ufe der durch die Biolumineszenzbildgebung und durch die cfu erhaltenen Daten liefert eine qualitative {\"U}bereinstimmung mit den durch die 19F MR Tomographie erhaltenen Daten. Dies trifft hierbei sowohl auf die {\"u}ber den gesamten Infektionsbereich hinweg summierten Signalamplituden, als auch auf das Volumen zu, in dem Fluor am Ort der Infektion akkumuliert wurde. Im Gegensatz zur Methode der cfu Bestimmung sind die MR Tomographie und die Biolumineszenzbildgebung nicht invasiv und erlauben die Verfolgung des Infektionsverlaufes an einem einzelnen Individuum. Hierzu ben{\"o}tigt, im Gegensatz zur MR Tomographie, die Methode der Biolumineszenzbildgebung jedoch einen speziellen Pathogenstamm. Dar{\"u}ber hinaus ist hervorzuheben, dass die MR Tomographie zudem die M{\"o}glichkeit bietet auch morphologische Informationen {\"u}ber den Infektionsbereich und seine Umgebung zu akquirieren. Gerade weil jede dieser Methoden die mit der Infektion einhergehenden Prozesse aus einer leicht anderen Blickrichtung betrachtet, erscheint es sinnvoll diese etablierte Untersuchungsplattform bestehend aus MRT, BLI und cfu {\"u}ber die in dieser Arbeit bearbeitete Fragestellung hinaus n{\"a}her zu untersuchen. Insbesondere der Aspekt inwieweit die drei Methoden sich gegenseitig erg{\"a}nzen, k{\"o}nnte einen tieferen Einblick in die Wechselwirkung zwischen Pathogen und Wirt erlauben. Auch wenn f{\"u}r die betrachtete Fragestellung bereits der hierdurchgef{\"u}hrte semiquanitative Ansatz zur Bestimmung der relativen Fluormengen am Ort der Infektion ausreichte, so ist doch im Allgemeinen w{\"u}nschenswert probenbezogen die Sensitivit{\"a}t der Spule und damit die G{\"u}te der Spulenabstimmung zu bestimmen. Hierzu ist jedoch die Aufnahme von \(B_1\)-Karten unabdingbar und wird entsprechend im Kapitel 4 \(Bloch-Siegert B_1^+-Mapping\) n{\"a}her addressiert. Der Schwerpunkt liegt hierbei, wie der Kapitelname bereits andeutet, auf der Bloch-Siegert Methode, die insbesondere in der pr{\"a}sentierten Implementierung in einer Turbo/ Multi Spin Echo Sequenz eine effiziente Nutzung der relativ langen \(T_\)2-Zeiten der Perfluorkarbone erlaubt. Da zudem die Bloch-Siegert-Methode eine rein phasenbasierte Methode ist, kann neben der aus den Daten erzeugten \(B_1\)-Karte zugleich ein unverf{\"a}lschtes Magnitudenbild generiert werden, wodurch eine sehr effiziente Nutzung der vorhandenen Messzeit erm{\"o}glicht wird. Diese Eigenschaft ist insbesondere f{\"u}r \(^{19}F\) Bildgebung von besonderem Interesse, da hier f{\"u}r jede Messung, aufgrund der {\"u}blicherweise relativ geringen Konzentration an Fluoratomen, lange Messzeiten ben{\"o}tigt werden. Zusammenfassend konnte anhand des untersuchten Tiermodells sowohl die F{\"a}higkeit der MR Tomographie nachgewiesen werden Infektionen im Zeitverlauf darzustellen, als auch die F{\"a}higkeit der MR Tomographie quantitative Informationen {\"u}ber den Verlauf der Infektion zu liefern. Desweiteren konnte eine M{\"o}glichkeit aufgezeigt werden, welche das Potential hat in vertretbarem Zeitrahmen auch in vivo B1+-Karten auf dem Fluorkanal zu erstellen und so einen zentralen Unsicherheitsfaktor, f{\"u}r Relaxometry und absolute Quantifizierung von \(^{19}F\) Daten in vivo, zu beseitigen.}, subject = {Kernspintomografie}, language = {de} } @article{OPUS4-22584, title = {\({ZZ}\) -> l(+)l(-)l '(+)l '(-) cross-section measurements and search for anomalous triple gauge couplings in 13 TeV \({pp}\) collisions with the ATLAS detector}, series = {Physical Review D}, volume = {97}, journal = {Physical Review D}, number = {3}, organization = {The ATLAS Collaboration}, doi = {10.1103/PhysRevD.97.032005}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-225844}, pages = {1-39}, year = {2018}, abstract = {Measurements of ZZ production in the l(+)l(-)l'(+)l'(-) channel in proton-proton collisions at 13 TeV center-of-mass energy at the Large Hadron Collider are presented. The data correspond to 36.1 fb(-1) of collisions collected by the ATLAS experiment in 2015 and 2016. Here l and l ' stand for electrons or muons. Integrated and differential ZZ -> l(+)l(-)l'(+)l'(-) cross sections with Z -> l(+)l(-) candidate masses in the range of 66 GeV to 116 GeV are measured in a fiducial phase space corresponding to the detector acceptance and corrected for detector effects. The differential cross sections are presented in bins of twenty observables, including several that describe the jet activity. The integrated cross section is also extrapolated to a total phase space and to all standard model decays of Z bosons with mass between 66 GeV and 116 GeV, resulting in a value of 17.3 +/- 0.9 [+/- 0.6(start) +/- 0.5 (syst) +/- 0.6 (lumi)] pb. The measurements are found to be in good agreement with the standard model. A search for neutral triple gauge couplings is performed using the transverse momentum distribution of the leading Z boson candidate. No evidence for such couplings is found and exclusion limits are set on their parameters.}, language = {en} } @article{ElKarehBihlmayerBuchteretal.2014, author = {El-Kareh, Lydia and Bihlmayer, Gustav and Buchter, Arne and Bentmann, Hendrik and Bl{\"u}gel, Stefan and Reinert, Friedrich and Bode, Matthias}, title = {A combined experimental and theoretical study of Rashba-split surface states on the ( √3x√3) Pb/Ag (111)R30° surface}, doi = {doi:10.1088/1367-2630/16/4/045017}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-112786}, year = {2014}, abstract = {We report on a combined low-temperature scanning tunneling spectroscopy (STS), angle-resolved photoemission spectroscopy (ARPES), and density functional theory (DFT) investigation of the ( √3x√3) Pb/Ag (111)R30° surface alloy which provides a giant Rashba-type spin splitting. With STS we observed spectroscopic features that are assigned to two hole-like Rashba-split bands in the unoccupied energy range. By means of STS and quantum interference mapping we determine the band onsets, splitting strengths, and dispersions for both bands. The unambiguous assignment of scattering vectors is achieved by comparison to ARPES measurements. While intra-band scattering is found for both Rashba bands, inter-band scattering is only observed in the occupied energy range. Spin- and orbitally-resolved band structures were obtained by DFT calculations. Considering the scattering between states of different spin- and orbital character, the apparent deviation between experimentally observed scattering events and the theoretically predicted spin polarization could be resolved.}, language = {en} } @phdthesis{Rueth2011, author = {R{\"u}th, Michael}, title = {A Comprehensive Study of Dilute Magnetic Semiconductor Resonant Tunneling Diodes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-71472}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {We investigate transport measurements on all II-VI semiconductor resonant tunneling diodes (RTDs). Being very versatile, the dilute magnetic semiconductor (DMS) system (Zn,Be,Mn,Cd)Se is a perfect testbed for various spintronic device designs, as it allows for separate control of electrical and magnetic properties. In contrast to the ferromagnetic semiconductor (Ga,Mn)As, doping ZnSe with Mn impurities does not alter the electrical properties of the semiconductor, as the magnetic dopant is isoelectric in the ZnSe host.}, subject = {Semimagnetischer Halbleiter}, language = {en} } @article{KarakStepanenkoAddicoatetal.2022, author = {Karak, Suvendu and Stepanenko, Vladimir and Addicoat, Matthew A. and Keßler, Philipp and Moser, Simon and Beuerle, Florian and W{\"u}rthner, Frank}, title = {A Covalent Organic Framework for Cooperative Water Oxidation}, series = {Journal of the American Chemical Society}, volume = {144}, journal = {Journal of the American Chemical Society}, number = {38}, issn = {0002-7863}, doi = {10.1021/jacs.2c07282}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-287591}, pages = {17661-17670}, year = {2022}, abstract = {The future of water-derived hydrogen as the "sustainable energy source" straightaway bets on the success of the sluggish oxygen-generating half-reaction. The endeavor to emulate the natural photosystem II for efficient water oxidation has been extended across the spectrum of organic and inorganic combinations. However, the achievement has so far been restricted to homogeneous catalysts rather than their pristine heterogeneous forms. The poor structural understanding and control over the mechanistic pathway often impede the overall development. Herein, we have synthesized a highly crystalline covalent organic framework (COF) for chemical and photochemical water oxidation. The interpenetrated structure assures the catalyst stability, as the catalyst's performance remains unaltered after several cycles. This COF exhibits the highest ever accomplished catalytic activity for such an organometallic crystalline solid-state material where the rate of oxygen evolution is as high as ∼26,000 μmol L\(^{-1}\) s\(^{-1}\) (second-order rate constant k ≈ 1650 μmol L s\(^{-1}\) g\(^{-2}\)). The catalyst also proves its exceptional activity (k ≈ 1600 μmol L s\(^{-1}\) g\(^{-2}\)) during light-driven water oxidation under very dilute conditions. The cooperative interaction between metal centers in the crystalline network offers 20-30-fold superior activity during chemical as well as photocatalytic water oxidation as compared to its amorphous polymeric counterpart.}, language = {en} } @phdthesis{Mark2011, author = {Mark, Stefan}, title = {A Magnetic Semiconductor based Non-Volatile Memory and Logic Element}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-71223}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {For the realization of a programmable logic device, or indeed any nanoscale device, we need a reliable method to probe the magnetization direction of local domains. For this purpose we extend investigations on the previously discovered tunneling anisotropic magneto resistance effect (TAMR) by scaling the pillar size from 100 µm down to 260 nm. We start in chapter 4 with a theoretical description of the TAMR effect and show experimental data of miniaturized pillars in chapter 5. With such small TAMR probes we are able to locally sense the magnetization on the 100 nm scale. Sub-micron TAMR and anisotropic magneto resistance (AMR) measurements of sub-millimeter areas show that the behavior of macroscopic (Ga,Mn)As regions is not that of a true macrospin, but rather an ensemble average of the behavior of many nearly identical macrospins. This shows that the magnetic anisotropies of the local regions are consistent with the behavior extracted from macroscopic characterization. A fully electrically controllable read-write memory device out the ferromagnetic semiconductor (Ga,Mn)As is presented in chapter 6. The structure consists of four nanobars which are connected to a circular center region. The first part of the chapter describes the lithography realization of the device. We make use of the sub-micron TAMR probes to read-out the magnetization state of a 650 nm central disk. Four 200 nm wide nanobars are connected to the central disk and serve as source and drain of a spin-polarized current. With the spin-polarized current we are able to switch the magnetization of the central disk by means of current induced switching. Injecting polarized holes with a spin angular momentum into a magnetic region changes the magnetization direction of the region due to the p-d exchange interaction between localized Mn spins and itinerant holes. The magnetization of the central disk can be controlled fully electrically and it can serve as one bit memory element as part of a logic device. In chapter 7 we discuss the domain wall resistance in (Ga,Mn)As. At the transition from nanobars to central disk we are able to generate 90° and 180° domain walls and measure their resistance. The results presented from chapter 5 to 7 combined with the preexisting ultracompact (Ga,Mn)As-based memory cell of ref. [Papp 07c] are the building blocks needed to realize a fully functioning programmable logic device. The work of ref. [Papp 07c] makes use of lithographically engineered strain relaxation to produce a structure comprised of two nanobars with mutually orthogonal uniaxial easy axes, connected by a narrow constriction. Measurements showed that the resistance of the constriction depends on the relative orientation of the magnetization in the two bars. The programmable logic device consists of two central disks connected by a small constriction. The magnetization of the two central disks are used as the input bits and the constriction serves as the output during the logic operation. The concept is introduced in the end of chapter 6 and as an example for a logic operation an XOR gate is presented. The functionality of the programmable logic scheme presented here can be straightforwardly extended to produce multipurpose functional elements, where the given geometry can be used as various different computational elements depending on the number of input bits and the chosen electrical addressing. The realization of such a programmable logic device is shown in chapter 8, where we see that the constriction indeed can serve as a output of the logic operation because its resistance is dependent on the relative magnetization state of both disks. Contrary to ref. [Papp 07c], where the individual magnetic elements connected to the constriction only have two non-volatile magnetic states, each disk in our scheme connected to the constriction has four non-volatile magnetic states. Switching the magnetization of a central disk with an electrical current does not only change the TAMR read-out of the respective disk, it also changes the resistance of the constriction. The resistance polar plot of the constriction maps the relative magnetization states of the individual disks. The presented device design serves as an all-electrical, all-semiconductor logic element. It combines a memory cell and data processing in a single monolithic paradigm.}, subject = {Magnetischer Halbleiter}, language = {en} }