@article{DostalFennelKochetal.2018,
  author    = {Dost{\´a}l, Jakub and Fennel, Franziska and Koch, Federico and Herbst, Stefanie and W{\"u}rthner, Frank and Brixner, Tobias},
  title     = {Direct observation of exciton-exciton interactions},
  series = {Nature Communications},
  volume    = {9},
  journal   = {Nature Communications},
  doi       = {10.1038/s41467-018-04884-4},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-226271},
  year      = {2018},
  abstract  = {Natural light harvesting as well as optoelectronic and photovoltaic devices depend on efficient transport of energy following photoexcitation. Using common spectroscopic methods, however, it is challenging to discriminate one-exciton dynamics from multi-exciton interactions that arise when more than one excitation is present in the system. Here we introduce a coherent two-dimensional spectroscopic method that provides a signal only in case that the presence of one exciton influences the behavior of another one. Exemplarily, we monitor exciton diffusion by annihilation in a perylene bisimide-based J-aggregate. We determine quantitatively the exciton diffusion constant from exciton-exciton-interaction 2D spectra and reconstruct the annihilation-free dynamics for large pump powers. The latter enables for ultrafast spectroscopy at much higher intensities than conventionally possible and thus improves signal-to-noise ratios for multichromophore systems; the former recovers spatio-temporal dynamics for a broad range of phenomena in which exciton interactions are present.},
  language  = {en}
}
@phdthesis{Wenderoth2024,
  author    = {Wenderoth, Sarah},
  title     = {Synthesis and characterization of shear stress indicator supraparticles},
  doi       = {10.25972/OPUS-35281},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-352819},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {The detection of smallest mechanical loads plays an increasingly important role in many areas of advancing automation and manufacturing technology, but also in everyday life. In this doctoral thesis, various microparticle systems were developed that are able to indicate mechanical shear stress via simple mechanisms. Using a toolbox approach, these systems can be spray-dried from various nanoscale primary particles (silica and iron oxide) to micrometer-sized units, so-called supraparticles. By varying the different building blocks and in combination with different dyes, a new class of mechanochromic shear stress indicators was developed by constructing hierarchically structured core-shell supraparticles that can indicate mechanical stress via an easily detectable color change. Three different mechanisms can be distinguished. If a signal becomes visible only by a mechanical load, it is a turn-on indicator. In the opposite case, the turn-off indicator, the signal is switched off by a mechanical load. In the third mechanism, the color-change indicator, the color changes as a result of a mechanical load. In principle, these indicators can be used in two different ways. First, they can be incorporated into a coating as an additive. These coatings can be applied to a wide range of products, including food packaging, medical devices, and generally any sensitive surface where mechanical stress, such as scratches, is difficult to detect but can have serious consequences. Second, these shear stress indicators can also be used directly in powder form and for example then applied in 3D-printing or in ball mills. A total of six different shear stress indicators were developed, three of which were used as additives in coatings and three were applied in powder form. Depending on their composition, these indicators were readout by fluorescence, UV-Vis or Magnetic Particle Spectroscopy. The development of these novel shear stress indicator supraparticles were successfully combined molecular chemistry with the world of nano-objects to develop macroscopic systems that can enable smart and communicating materials to indicate mechanical stress in a variety of applications.},
  subject      = {Nanopartikel},
  language  = {en}
}
@article{DenkSchmidtSchurretal.2021,
  author    = {Denk, S. and Schmidt, S. and Schurr, Y. and Schwarz, G. and Schote, F. and Diefenbacher, M. and Armendariz, C. and Dejure, F. and Eilers, M. and Wiegering, Armin},
  title     = {CIP2A regulates MYC translation (via its 5′UTR) in colorectal cancer},
  series = {International Journal of Colorectal Disease},
  volume    = {36},
  journal   = {International Journal of Colorectal Disease},
  number    = {5},
  doi       = {10.1007/s00384-020-03772-y},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-280092},
  pages     = {911-918},
  year      = {2021},
  abstract  = {Background Deregulated expression of MYC is a driver of colorectal carcinogenesis, suggesting that decreasing MYC expression may have significant therapeutic value. CIP2A is an oncogenic factor that regulates MYC expression. CIP2A is overexpressed in colorectal cancer (CRC), and its expression levels are an independent marker for long-term outcome of CRC. Previous studies suggested that CIP2A controls MYC protein expression on a post-transcriptional level. Methods To determine the mechanism by which CIP2A regulates MYC in CRC, we dissected MYC translation and stability dependent on CIP2A in CRC cell lines. Results Knockdown of CIP2A reduced MYC protein levels without influencing MYC stability in CRC cell lines. Interfering with proteasomal degradation of MYC by usage of FBXW7-deficient cells or treatment with the proteasome inhibitor MG132 did not rescue the effect of CIP2A depletion on MYC protein levels. Whereas CIP2A knockdown had marginal influence on global protein synthesis, we could demonstrate that, by using different reporter constructs and cells expressing MYC mRNA with or without flanking UTR, CIP2A regulates MYC translation. This interaction is mainly conducted by the MYC 5′UTR. Conclusions Thus, instead of targeting MYC protein stability as reported for other tissue types before, CIP2A specifically regulates MYC mRNA translation in CRC but has only slight effects on global mRNA translation. In conclusion, we propose as novel mechanism that CIP2A regulates MYC on a translational level rather than affecting MYC protein stability in CRC.},
  language  = {en}
}
@article{HeWuD'Avinoetal.2018,
  author    = {He, Tao and Wu, Yanfei and D'Avino, Gabriele and Schmidt, Elliot and Stolte, Matthias and Cornil, J{\´e}r{\^o}me and Beljonne, David and Ruden, P. Paul and W{\"u}rthner, Frank and Frisbie, C. Daniel},
  title     = {Crystal step edges can trap electrons on the surfaces of n-type organic semiconductors},
  series = {Nature Communications},
  volume    = {9},
  journal   = {Nature Communications},
  doi       = {10.1038/s41467-018-04479-z},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-227957},
  year      = {2018},
  abstract  = {Understanding relationships between microstructure and electrical transport is an important goal for the materials science of organic semiconductors. Combining high-resolution surface potential mapping by scanning Kelvin probe microscopy (SKPM) with systematic field effect transport measurements, we show that step edges can trap electrons on the surfaces of single crystal organic semiconductors. n-type organic semiconductor crystals exhibiting positive step edge surface potentials display threshold voltages that increase and carrier mobilities that decrease with increasing step density, characteristic of trapping, whereas crystals that do not have positive step edge surface potentials do not have strongly step density dependent transport. A device model and microelectrostatics calculations suggest that trapping can be intrinsic to step edges for crystals of molecules with polar substituents. The results provide a unique example of a specific microstructure-charge trapping relationship and highlight the utility of surface potential imaging in combination with transport measurements as a productive strategy for uncovering microscopic structure-property relationships in organic semiconductors.},
  language  = {en}
}
@phdthesis{Beudert2024,
  author    = {Beudert, Matthias},
  title     = {Bioinspired Modification and Functionalization of Hydrogels for Applications in Biomedicine},
  doi       = {10.25972/OPUS-32288},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-322887},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {Over the years, hydrogels have been developed and used for a huge variety of different applications ranging from drug delivery devices to medical products. In this thesis, a poly(2-methyl-2-oxazoline) (POx) / poly(2-n-propyl-2-oxazine) (POzi) bioink was modified and analyzed for the use in biofabrication and targeted drug delivery. In addition, the protein fibrinogen (Fbg) was genetically modified for an increased stability towards plasmin degradation for its use as wound sealant. In Chapter 1, a thermogelling, printable POx/POzi-based hydrogel was modified with furan and maleimide moieties in the hydrophilic polymer backbone facilitating post-printing maturation of the constructs via Diels-Alder chemistry. The modification enabled long-term stability of the hydrogel scaffolds in aqueous solutions which is necessary for applications in biofabrication or tissue engineering. Furthermore, we incorporated RGD-peptides into the hydrogel which led to cell adhesion and elongated morphology of fibroblast cells seeded on top of the scaffolds. Additional printing experiments demonstrate that the presented POx/POzi system is a promising platform for the use as a bioink in biofabrication. Chapter 2 highlights the versatility of the POx/POzi hydrogels by adapting the system to a use in targeted drug delivery. We used a bioinspired approach for a bioorthogonal conjugation of insulin-like growth factor I (IGF-I) to the polymer using an omega-chain-end dibenzocyclooctyne (DBCO) modification and a matrix metalloprotease-sensitive peptide linker. This approach enabled a bioresponsive release of IGF-I from hydrogels as well as spatial control over the protein distribution in 3D printed constructs which makes the system a candidate for the use in personalized medicine. Chapter 3 gives a general overview over the necessity of wound sealants and the current generations of fibrin sealants on the market including advantages and challenges. Furthermore, it highlights trends and potential new strategies to tackle current problems and broadens the toolbox for future generations of fibrin sealants. Chapter 4 applies the concepts of recombinant protein expression and molecular engineering to a novel generation of fibrin sealants. In a proof-of-concept study, we developed a new recombinant fibrinogen (rFbg) expression protocol and a Fbg mutant that is less susceptible to plasmin degradation. Targeted lysine of plasmin cleavage sites in Fbg were exchanged with alanine or histidine in different parts of the molecule. The protein was recombinantly produced and restricted plasmin digest was analyzed using high resolution mass spectrometry. In addition to that, we developed a novel time resolved screening protocol for the detection of new potential plasmin cleavage sites for further amino acid exchanges in the fibrin sealant.},
  subject      = {Hydrogel},
  language  = {en}
}
@phdthesis{Endres2024,
  author    = {Endres, Erik},
  title     = {Kovalente Inhibitoren: Modellierung und Design},
  doi       = {10.25972/OPUS-35933},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-359330},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {Kovalente Inhibition stellt einen effektiven Weg dar, die Verweildauer des Liganden innerhalb einer Bindetasche zu erh{\"o}hen. In dieser Arbeit wurden theoretische Methoden angewendet, um die Reaktivit{\"a}t und den nichtkovalenten Zustand vor der Reaktion zu modellieren. Im Rahmen einer Fallstudie zu Cathepsin K wurden nichtkovalente Modelle von kovalenten Inhibitoren generiert. F{\"u}r verschiedene Komplexe aus Cathepsin K und einem kovalent gebundenem Liganden wurde der Zustand vor der Reaktion modelliert und dessen Stabilit{\"a}t im Rahmen einer klassischen MD-Simulation {\"u}berpr{\"u}ft. Die Stabilit{\"a}t des Warheads in der Bindetasche hing haupts{\"a}chlich vom gew{\"a}hlten Protonierungszustand der katalytischen Aminos{\"a}uren ab. F{\"u}r eine Reihe von Inhibitoren der ChlaDUB1 wurde ein Protokoll aus quantenmechanischen Rechnungen genutzt, um die Reaktivit{\"a}t verschiedener Warheads abzusch{\"a}tzen. Die erhaltenen Aktivierungsenergien korrelierten mit experimentell bestimmten Raten zur Inaktivierung des Enzyms. Im Rahmen eines Wirkstoffdesign-Projektes zur Deubiquitinase USP28 wurden von unpublizierten Kristallstrukturen ausgehend erste Docking-Experimente durchgef{\"u}hrt. Es konnte gezeigt werden, dass ein literaturbekannter Inhibitor von USP28 mit einem Warhead so modifiziert werden kann, dass die reaktive Einheit in direkter Nachbarschaft zu einem Cystein positioniert wird. F{\"u}r diese Warheads wurden ebenfalls quantenmechanische Rechnungen zur Bestimmung der Aktivierungsenergie durchgef{\"u}hrt. Um besser nachvollziehen zu k{\"o}nnen, warum bei einem Photoswitch-Inhibitor der Butyrylcholin-Esterase der cis-Zustand des Molek{\"u}ls besser inhibiert als der trans-Zustand, wurde eine Docking-Studie des Zustandes vor der Reaktion durchgef{\"u}hrt. Es konnte ein qualitatives Modell aufgestellt werden, das zeigt, dass der trans-Zustand aufgrund seiner l{\"a}ngeren Form mit wichtigen Aminos{\"a}uren am Eingang der Bindungstasche kollidiert.},
  subject      = {Molekulardynamik},
  language  = {de}
}
@phdthesis{Ramirez2024,
  author    = {Ramirez, Yesid A.},
  title     = {Structural basis of ubiquitin recognition and rational design of novel covalent inhibitors targeting Cdu1 from \(Chlamydia\) \(Trachomatis\)},
  doi       = {10.25972/OPUS-19168},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-191683},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {The WHO-designated neglected-disease pathogen Chlamydia trachomatis (CT) is a gram-negative bacterium responsible for the most frequently diagnosed sexually transmitted infection worldwide. CT infections can lead to infertility, blindness and reactive arthritis, among others. CT acts as an infectious agent by its ability to evade the immune response of its host, which includes the impairment of the NF-κB mediated inflammatory response and the Mcl1 pro-apoptotic pathway through its deubiquitylating, deneddylating and transacetylating enzyme ChlaDUB1 (Cdu1). Expression of Cdu1 is also connected to host cell Golgi apparatus fragmentation, a key process in CT infections. Cdu1 may this be an attractive drug target for the treatment of CT infections. However, a lead molecule for the development of novel potent inhibitors has been unknown so far. Sequence alignments and phylogenetic searches allocate Cdu1 in the CE clan of cysteine proteases. The adenovirus protease (adenain) also belongs to this clan and shares a high degree of structural similarity with Cdu1. Taking advantage of topological similarities between the active sites of Cdu1 and adenain, a target-hopping approach on a focused set of adenain inhibitors, developed at Novartis, has been pursued. The thereby identified cyano-pyrimidines represent the first active-site directed covalent reversible inhibitors for Cdu1. High-resolution crystal structures of Cdu1 in complex with the covalently bound cyano-pyrimidines as well as with its substrate ubiquitin have been elucidated. The structural data of this thesis, combined with enzymatic assays and covalent docking studies, provide valuable insights into Cdu1s activity, substrate recognition, active site pocket flexibility and potential hotspots for ligand interaction. Structure-informed drug design permitted the optimization of this cyano-pyrimidine based scaffold towards HJR108, the first molecule of its kind specifically designed to disrupt the function of Cdu1. The structures of potentially more potent and selective Cdu1 inhibitors are herein proposed. This thesis provides important insights towards our understanding of the structural basis of ubiquitin recognition by Cdu1, and the basis to design highly specific Cdu1 covalent inhibitors.},
  subject      = {Ubiquitin},
  language  = {en}
}
@article{BalasubramanianSkafHolzgrabeetal.2018,
  author    = {Balasubramanian, Srikkanth and Skaf, Joseph and Holzgrabe, Ulrike and Bharti, Richa and F{\"o}rstner, Konrad U. and Ziebuhr, Wilma and Humeida, Ute H. and Abdelmohsen, Usama R. and Oelschlaeger, Tobias A.},
  title     = {A new bioactive compound from the marine sponge-derived Streptomyces sp. SBT348 inhibits staphylococcal growth and biofilm formation},
  series = {Frontiers in Microbiology},
  volume    = {9},
  journal   = {Frontiers in Microbiology},
  doi       = {10.3389/fmicb.2018.01473},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-221408},
  year      = {2018},
  abstract  = {Staphylococcus epidermidis, the common inhabitant of human skin and mucosal surfaces has emerged as an important pathogen in patients carrying surgical implants and medical devices. Entering the body via surgical sites and colonizing the medical devices through formation of multi-layered biofilms leads to refractory and persistent device-related infections (DRIs). Staphylococci organized in biofilms are more tolerant to antibiotics and immune responses, and thus are difficult-to-treat. The consequent morbidity and mortality, and economic losses in health care systems has strongly necessitated the need for development of new anti-bacterial and anti-biofilm-based therapeutics. In this study, we describe the biological activity of a marine sponge-derived Streptomyces sp. SBT348 extract in restraining staphylococcal growth and biofilm formation on polystyrene, glass, medically relevant titan metal, and silicone surfaces. A bioassay-guided fractionation was performed to isolate the active compound (SKC3) from the crude SBT348 extract. Our results demonstrated that SKC3 effectively inhibits the growth (MIC: 31.25 \(\mu\)g/ml) and biofilm formation (sub-MIC range: 1.95-<31.25 \(\mu\)g/ml) of S. epidermidis RP62A in vitro. Chemical characterization of SKC3 by heat and enzyme treatments, and mass spectrometry (HRMS) revealed its heat-stable and non-proteinaceous nature, and high molecular weight (1258.3 Da). Cytotoxicity profiling of SKC3 in vitro on mouse fibroblast (NIH/3T3) and macrophage (J774.1) cell lines, and in vivo on the greater wax moth larvae Galleria mellonella revealed its non-toxic nature at the effective dose. Transcriptome analysis of SKC3 treated S. epidermidis RP62A has further unmasked its negative effect on central metabolism such as carbon flux as well as, amino acid, lipid, and energy metabolism. Taken together, these findings suggest a potential of SKC3 as a putative drug to prevent staphylococcal DRIs.},
  language  = {en}
}