@phdthesis{Zierhut2004, author = {Zierhut, Matthias}, title = {Wasserstoffatomdynamik in Radikalen, Clustern und Biomolek{\"u}len}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-11941}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2004}, abstract = {Die Untersuchung der molekularen Dynamik elektronisch angeregter Molek{\"u}le stand im Zentrum dieser Arbeit. In vielen F{\"a}llen ist die Dynamik dieser Zust{\"a}nde mit einer Bewegung von Wasserstoffatomen assoziiert. Mittels zeit- und frequenzaufgel{\"o}ster Photofragmentspektroskopie lassen sich Aussagen {\"u}ber die Energieumverteilung w{\"a}hrend der Dissoziation und {\"u}ber die Geschwindigkeit der Wasserstoffatomabstraktion treffen. Die Ergebnisse solcher Messungen k{\"o}nnen als Grundlage f{\"u}r die Diskussion der molekularen Reaktionsdynamik und als Pr{\"u}fstein f{\"u}r theoretische Berechnungen dienen. Theoretische Vorhersagen weisen der Wasserstoffatomdynamik eine enorme Bedeutung f{\"u}r die Photochemie von Biomolek{\"u}len zu. Unter den Biomolek{\"u}len nimmt die Untersuchung der Photochemie und der Photophysik isolierter DNA-Basen eine herausragende Stellung ein. Diese Untersuchungen sind dabei stark von der Hoffnung auf ein besseres Verst{\"a}ndnis der Entstehung von Strahlungssch{\"a}den motiviert, die letztendlich zu Hautkrebs f{\"u}hren k{\"o}nnen. Die Frage, ob jeder Baustein der DNA potentiell photostabil ist, wurde im Rahmen dieser Arbeit f{\"u}r die DNA-Base Adenin untersucht. Die Experimente erfolgten an isolierten Molek{\"u}len in der Gasphase, so dass es m{\"o}glich war, die intrinsischen Eigenschaften von Adenin zu untersuchen. Es konnte dabei gezeigt werden, dass Adenin nach Bestrahlung mit UV-Licht vornehmlich das N9-H-Wasserstoffatom abspaltet und diese Abspaltung extrem schnell verl{\"a}uft. Dies steht in Einklang mit einem Deaktivierungsprozess {\"u}ber eine repulsive Potentialkurve, wie er theoretisch vorhergesagt worden war. In nat{\"u}rlicher Umgebung, d.h. in w{\"a}ssriger L{\"o}sung, sind Wasserstoffatome, die in der Gasphase unter UV-Stress abdissoziieren, in Wasserstoffbr{\"u}ckenbindungen zu Solvensmolek{\"u}len oder in das Makromolek{\"u}l eingebunden. Daher kann Bestrahlung zu Wasserstoffatom- oder Protonentransfer f{\"u}hren. Die Frage, ob nach UV-Anregung photoacide Verbindungen wie Phenol oder Naphthol ein Wasserstoffatom oder ein Proton an Solvensmolek{\"u}le {\"u}bergeben, steht derzeit im Mittelpunkt lebhafter wissenschaftlicher Diskussion. F{\"u}r das Verst{\"a}ndnis der Photoacidit{\"a}t ist die Kenntnis der Schwingungsstruktur, v.a. der intermolekularen Schwingungen, von Phenol- bzw. Naphthol-Wasser-Clustern unerl{\"a}sslich. F{\"u}r den Naphthol/(H2O)1-Cluster konnten f{\"u}r den ersten elektronisch angeregten Zustand alle intermolekularen in plane Schwingungen nachgewiesen werden. Wasserstoffatomdynamik ist nicht nur f{\"u}r geschlossenschalige Biomolek{\"u}le wie Adenin oder wasserstoffbr{\"u}ckengebundene Cluster von Bedeutung, sondern auch f{\"u}r offenschalige organische Radikale. Alkylradikale sind dabei als reaktive Intermediate u.a. in chemischenVerbrennungsprozessen {\"a}ußerst wichtig. F{\"u}r das hier untersuchte tert-Butylradikal konnte ein Wasserstoffverlust beobachtet werden. Dieser verlief bei niedrigen Anregungsenergien gem{\"a}ß statistischer Vorhersagen, bei h{\"o}heren Anregungsenergien jedoch deutlich langsamer als aus einfachen statistischen Modellen zu erwarten w{\"a}re. Diese Ergebnisse k{\"o}nnten sich mit einem bisher nicht identifizierten elektronischen Zustand erkl{\"a}ren lassen, der eine Rolle in der Photochemie bzw. Photodissoziationsdynamik spielt und m{\"o}glicherweise von allgemeiner Bedeutung f{\"u}r die Photophysik von Alkylradikalen ist. Zuk{\"u}nftige Arbeiten werden die Untersuchungen der Wasserstoffatomdynamik der im Rahmen dieser Arbeit untersuchten Systeme vertiefen und auf weitere relevante Molek{\"u}le (Thymin, Cytosin, Guanin, Uracil, prim{\"a}re und sekund{\"a}re Alkylradikale) ausdehnen.}, subject = {Wasserstoffatom}, language = {de} } @unpublished{WohlgemuthMitric2020, author = {Wohlgemuth, Matthias and Mitric, Roland}, title = {Excitation energy transport in DNA modelled by multi-chromophoric field-induced surface hopping}, series = {Physical Chemistry Chemical Physics}, journal = {Physical Chemistry Chemical Physics}, edition = {submitted version}, doi = {10.1039/D0CP02255A}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-209467}, year = {2020}, abstract = {Absorption of ultraviolet light is known as a major source of carcinogenic mutations of DNA. The underlying processes of excitation energy dissipation are yet not fully understood. In this work we provide a new and generally applicable route for studying the excitation energy transport in multi-chromophoric complexes at an atomistic level. The surface-hopping approach in the frame of the extended Frenkel exciton model combined with QM/MM techniques allowed us to simulate the photodynamics of the alternating (dAdT)10 : (dAdT)10 double-stranded DNA. In accordance with recent experiments, we find that the excited state decay is multiexponential, involving a long and a short component which are due to two distinct mechanisms: formation of long-lived delocalized excitonic and charge transfer states vs. ultrafast decaying localized states resembling those of the bare nucleobases. Our simulations explain all stages of the ultrafast photodynamics including initial photoexcitation, dynamical evolution out of the Franck-Condon region, excimer formation and nonradiative relaxation to the ground state.}, language = {en} } @phdthesis{Wirsing2023, author = {Wirsing, Sara}, title = {Computational Spectroscopic Studies with Focus on Organic Semiconductor Systems}, doi = {10.25972/OPUS-28655}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-286552}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {This work presents excited state investigations on several systems with respect to experimental spectroscopic work. The majority of projects covers the temporal evolution of excitations in thin films of organic semiconductor materials. In the first chapters, thinfilm and interface systems are build from diindeno[1,2,3-cd:1',2',3'-lm]perylene (DIP) and N,N'-bis-(2-ethylhexyl)-dicyanoperylene-3,4:9,10-bis(dicarboximide) (PDIR-CN2) layers, in the third chapter bulk systems consist of 4,4',4"-tris[(3-methylphenyl)phenylamino] triphenylamine (m-MTDATA), 4,7-diphenyl-1,10-phenanthroline (BPhen) and tris-(2,4,6-trimethyl-3-(pyridin-3-yl)phenyl)borane (3TPYMB). These were investigated by aggregate-based calculations. Careful selection of methods and incorporation of geometrical relaxation and environmental effects allows for a precise energetical assignment of excitations. The biggest issue was a proper description of charge-transfer excitations, which was resolved by the application of ionization potential tuning on aggregates. Subsequent characterization of excitations and their interplay condenses the picture. Therefore, we could assign important features of the experimental spectroscopic data and explain differences between systems. The last chapter in this work covers the analysis of single molecule spectroscopy on methylbismut. This poses different challenges for computations, such as multi-reference character of low-lying excitations and an intrinsic need for a relativistic description. We resolved this by combining complete active space self-consistent field based methods with scalarrelativistic density-functional theory. Thus we were able to confidently assign the spectroscopic features and explain underlying processes.}, subject = {Theoretische Chemie}, language = {en} } @phdthesis{Welter2008, author = {Welter, Nele}, title = {Untersuchungen von Pigmenten in r{\"o}mischer Wandmalerei und antiken Gl{\"a}sern}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-28519}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2008}, abstract = {In dieser Arbeit werden Pigmente in verschiedenen arch{\"a}ologischen Materialien mittels Mikro-Raman-Spektroskopie arch{\"a}ometrisch untersucht. Zus{\"a}tzlich werden Analysen mittels Elektronenstrahl-Mikrosonde und R{\"o}ntgenpulverdiffraktometrie durchgef{\"u}hrt, um einerseits die Ergebnisse der spektroskopischen Untersuchungen zu st{\"u}tzen und andererseits die Vor- und Nachteile der Mikro-Raman-Spektrokopie gegen{\"u}ber diesen Methoden aufzuzeigen. Im ersten Teil werden Pigmentanalysen r{\"o}mischer Fresken in den Provinzen Noricum, Raetien und Obergermanien vorgestellt, um daraus Informationen {\"u}ber Umfang und Variationsbreite der Farbpalette antiker Maler abzuleiten sowie R{\"u}ckschl{\"u}sse auf die Herkunft der Rohstoffe und eventuelle Handelsrouten zu ziehen. Die M{\"o}glichkeit der zeitlichen Einordnung von Fresken anhand der verwendeten Pigmente wird ebenfalls diskutiert. Im zweiten Teil wird die chemische Zusammensetzung antiker Gl{\"a}ser am Beispiel einer Sammlung von Mosaikgl{\"a}sern aus dem Martin-von-Wagner-Museum W{\"u}rzburg und verschiedener bunter Glasperlen aus Sri Lanka und Oman untersucht, um Informationen {\"u}ber die verwendeten Rohmaterialien und die Technologie der antiken Glasproduktion zu gewinnen. Insbesondere wird auf die Pigmente eingegangen, die die Farbigkeit der Gl{\"a}ser verursachen. Anhand der Differenzen in den Glasrezepturen und Pigmenten der Gl{\"a}ser wird eine zeitliche Einordnung er{\"o}rtert.}, subject = {Wandmalerei}, language = {de} } @article{WeiserCuiDewhurstetal.2023, author = {Weiser, Jonas and Cui, Jingjing and Dewhurst, Rian D. and Braunschweig, Holger and Engels, Bernd and Fantuzzi, Felipe}, title = {Structure and bonding of proximity-enforced main-group dimers stabilized by a rigid naphthyridine diimine ligand}, series = {Journal of Computational Chemistry}, volume = {44}, journal = {Journal of Computational Chemistry}, number = {3}, doi = {10.1002/jcc.26994}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-312586}, pages = {456 -- 467}, year = {2023}, abstract = {The development of ligands capable of effectively stabilizing highly reactive main-group species has led to the experimental realization of a variety of systems with fascinating properties. In this work, we computationally investigate the electronic, structural, energetic, and bonding features of proximity-enforced group 13-15 homodimers stabilized by a rigid expanded pincer ligand based on the 1,8-naphthyridine (napy) core. We show that the redox-active naphthyridine diimine (NDI) ligand enables a wide variety of structural motifs and element-element interaction modes, the latter ranging from isolated, element-centered lone pairs (e.g., E = Si, Ge) to cases where through-space π bonds (E = Pb), element-element multiple bonds (E = P, As) and biradical ground states (E = N) are observed. Our results hint at the feasibility of NDI-E2 species as viable synthetic targets, highlighting the versatility and potential applications of napy-based ligands in main-group chemistry.}, language = {en} } @phdthesis{Wehner2018, author = {Wehner, Johannes}, title = {Wellenfunktionsbasierte Analyse zweidimensionaler Spektren: Wellenpaketbewegung in Dimeren und Quantendiffusionsdynamik}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-163555}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {Diese Arbeit befasst sich mit der st{\"o}rungstheoretischen Berechnung von zweidimensionalen Photonen-Echo-Spektren f{\"u}r das elektronische und vibronische Modell eines Homo- und Hetero-Dimers sowie f{\"u}r ein vibronisches Modell eines Monomers unter dem Einfluss einer System-Bad-Wechselwirkung. Bei der Analyse der Dimerspektren steht neben der Orientierungsmittelung der Polarisation dritter Ordnung der Unterschied zwischen elektronischen und vibronischen Spektren sowie der Vergleich der Spektren von Homo- und Hetero-Dimeren im Zentrum des Interesses. Bei der Analyse der Monomer-Spektren steht die Behandlung einer dissipativen Dynamik bzw. des vibrational-coolings innerhalb eines stochastischen Ansatzes im Vordergrund. Der erste Teil dieser Arbeit konzentriert sich auf die st{\"o}rungstheoretische Berechnung der Polarisation dritter Ordnung in Dimeren. Dabei werden alle Aspekte und Ergebnisse f{\"u}r verschiedene Geometrien der {\"U}bergangsdipolmomente analysiert und diskutiert. Die Berechnungen ber{\"u}cksichtigen dabei auch die zuf{\"a}llige Anordnung der Molek{\"u}le in der Probe. Die Zusammenh{\"a}nge zwischen den 2D-Spektren und den Eigenschaften der Monomereinheiten, die Abh{\"a}ngigkeit der Intensit{\"a}ten mancher Peaks von der zeitlichen Abfolge der Pulse sowie der Einfluss der elektronischen Kopplung und verschiedener {\"U}bergangsdipolmomente erm{\"o}glichen ein grundlegendes Verst{\"a}ndnis der elektronischen Photonen-Echo-Spektren. Im elektronischen Dimer wird der Hetero-Dimer-Charakter durch verschiedene Monomeranregungsenergien sowie unterschiedliche {\"U}bergangsdipolmomente der Monomereinheiten bestimmt. Der Einfluss dieser Gr{\"o}ßen auf die Photonen-Echo-Spektren kann durch die Kombination einer detaillierten analytischen Betrachtung und numerischen Rechnungen anschaulich nachvollzogen werden. In der vibronischen Betrachtungsweise zeigt sich, dass die Spektren deutlich an Komplexit{\"a}t gewinnen. Durch die Vibrationsfreiheitsgrade vervielfachen sich die m{\"o}glichen {\"U}berg{\"a}nge im System und damit die m{\"o}glichen Peakpositionen im Spektrum. Jeder Peak spaltet in eine Vibrationssubstruktur auf, die je nach ihrer energetischen Position mit anderen {\"u}berlagern kann. Der Vergleich zwischen Homo- und Hetero-Dimer-Spektren wird durch die Wahl verschiedener Vibrationsfrequenzen und unterschiedlicher Gleichgewichtsabst{\"a}nde entlang der Vibrationskoordinaten erweitert. Die Berechnung des Orientierungsmittels erfolgt mit zwei verschiedenen Ans{\"a}tzen. Zum einen wird das Mittel durch den numerischen sampling-Ansatz berechnet. Dabei werden Azimutal- und Polarwinkel in kleinen Winkelinkrementen abgetastet und f{\"u}r jede Kombination ein 2D-Spektrum berechnet. Die Einzelspektren werden anschließend gemittelt. Diese Methode erweist sich im Dimer als sehr effektiv. Zum anderen erlaubt die analytische Auswertung der Polarisation dritter Ordnung, das gemittelte Spektrum direkt in einer einzelnen Rechnung durch winkelgemittelte Gewichtungsfaktoren zu bestimmen. Bei der Berechnung der elektronischen 2D-Spektren ist diese Methode sehr leistungsf{\"a}hig, da alle Ausdr{\"u}cke analytisch bekannt sind. F{\"u}r vibronische Systeme ist dieser Ansatz ebenfalls sehr leistungsstark, ben{\"o}tigt aber eine einmalige aufwendige Analyse vor der Berechnung. Trotz der deutlich erh{\"o}hten Anzahl an Zustandsvektoren, die propagiert werden m{\"u}ssen, ist diese Methode circa zweimal schneller als die direkte Mittelung mit der sampling-Methode. Im zweiten Teil konzentriert sich die Arbeit auf die Beschreibung eines Monomers, das sich in einer dissipativen Umgebung befindet. Dabei wird auf die L{\"o}sung einer stochastischen Schr{\"o}dingergleichung zur{\"u}ckgegriffen. Speziell wird die sogenannte quantum-state-diffusion-Methode benutzt. Dabei werden nicht nur die Erwartungswerte f{\"u}r die Energie und den Ort, sondern auch die Polarisation dritter Ordnung - eine phasensensitive Gr{\"o}ße - bestimmt. In der theoretischen Fragestellung wird dabei, ausgehend von der von-Neumann Gleichung, die Zeitentwicklung der reduzierten Dichtematrix durch die Integration einer stochastischen zeitabh{\"a}ngigen Schr{\"o}dingergleichung reproduziert. In Rechnungen koppelt die Stochastik {\"u}ber die Erwartungswerte von Ort und Impuls die verschiedenen st{\"o}rungstheoretischen Korrekturen der Wellenfunktion miteinander. Die Spektren, die aus den numerischen Simulationen erhalten werden, spiegeln das dissipative Verhalten des Systems detailliert wider. Eine Analyse der Erwartungswerte von Ort und Energie zeigt, dass sich die einzelnen elektronischen Zust{\"a}nde wie ged{\"a}mpfte harmonische Oszillatoren verhalten und jeweils einen exponentiellen Zerfall abh{\"a}ngig von der Dissipationskonstante zeigen. Dieser Teil der Arbeit erweitert vorausgehende Untersuchungen, bei denen ein vereinfachter Ansatz zu Einsatz kam, der die korrelierte Stochastik nicht ber{\"u}cksichtigte.}, subject = {Molekulardynamik}, language = {de} } @phdthesis{Walter2015, author = {Walter, Christof}, title = {Excitonic States and Optoelectronic Properties of Organic Semiconductors - A Quantum-Chemical Study Focusing on Merocyanines and Perylene-Based Dyes Including the Influence of the Environment}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123494}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {The scope of computational chemistry can be broadened by developing new methods and more efficient algorithms. However, the evaluation of the applicability of the methods for the different fields of chemistry is equally important. In this thesis systems with an unusual and complex electronic structure, such as excitonic states in organic semiconductors, a boron-containing bipolaron and the excited states of pyracene were studied and the applicability of the toolkit of computational chemistry was investigated. Concerning the organic semiconductors the focus was laid on organic solar cells, which are one of the most promising technologies with regard to satisfying the world's need for cheap and environmentally sustainable energy. This is due to the low production and material costs and the possibility of using flexible and transparent devices. However, their efficiency does still not live up to the expectations. Especially the exciton diffusion lengths seem to be significantly too short. In order to arrive at improved modules, a fundamental understanding of the elementary processes occurring in the cell on the molecular and supramolecular level is needed. Computational chemistry can provide insight by separating the different effects and providing models for predictions and prescreenings. In this thesis, the focus was laid on the description of excitonic states in merocyanines and perylene-based dyes taking the influence of the environment into account. At first, the photochemical isomerization between two configurations of 6-nitro BIPS observed experimentally was studied by first benchmarking several functionals against SCS-ADC(2) in the gas phase and subsequently calculating the excited-state potential energy surface. The geometries obtained from a relaxed scan in the ground state as well as from a scan in the excited state were used. The environment was included using different polarizable continuum models. It was shown that the choice of the model and especially the question of the state specificity of the approach is of vital importance. Using the results of the calculations, a two-dimensional potential energy surface could be constructed that could be used to explain the experimental findings. Furthermore, the importance of the excited-state isomerization as a potential deactivation channel in the exciton transport was pointed out. Then the assessment of the suitability of different merocyanines for optoelectronic applications with quantum-chemical methods was discussed. At first, the effect of the environment on the geometry, especially on the bond length alternation pattern, was investigated. It was shown that the environment changes the character of the ground-state wave function of several merocyanines qualitatively, which means that the results of gas-phase calculations are meaningless - at least when a comparison with solution or device data is desired. It was demonstrated that using a polarizable continuum model with an effective epsilon, a qualitative agreement between the calculated geometry and the geometry in the crystal structure can be obtained. Therefore, by comparing the bond length alternation in solution and in the crystal, a rough estimate of the effect of the crystal environment can be made. It was further shown that the connection between the HOMO energy and the open-circuit voltage is not as simple as it is often implied in the literature. It was discussed that it is not clear whether the HOMO of a single molecule or a \$\pi\$-stack containing several monomers should be used and if the environmental charges of the bulk phase or the interface should be included. Investigating the dependence of the HOMO energy on the stack size yielded no definitive trend. Furthermore, it was discussed that the effect due the optimization of the modules (solvent, bulk heterojunction) during the production masks any potential correlation between the HOMO energy and measured open-circuit values. Therefore, a trend can only be expected for unoptimized bilayer cells. It was concluded that ultimately, the importance of the HOMO energy should not be overestimated. The correlation between the exciton reorganization energy and the so-called cyanine limit, which is predicted by a simple two-state model, was also discussed. By referring to the results of VB calculations, it was discussed that the correlation indeed exists and is non-negligible, although the effect is not as strong as one might have expected. In this context, a potential application of a VB/MM approach was covered briefly. The importance of the molecular reorganization energy and the device morphology was also discussed. It was concluded that the optimization of merocyanines for organic optoelectronic devices is inherently a multiparameter problem and one cannot expect to find one particular parameter, which solely controls the efficiency. The perylene-based dyes were studied with a focus on the description of a potential trapping mechanism involving an intermolecular motion in a dimer. The aim was to find methods which can be applied to larger model systems than a dimer and take the effect of the environment into account. As a test coordinate the longitudinal shift of two monomers against each other was used. At first, it was demonstrated how the character of an excited state in a dimer can be defined and how it can be extracted from a standard quantum-chemical calculation. Then several functionals were benchmarked and their applicability or failure was rationalized using the character analysis. Two recipes could be proposed, which were applied to a constraint optimization (only intermolecular degrees of freedom) in the excited states of the PBI dimer and to the description of the potential energy surfaces of ground and excited states along a longitudinal displacement in the perylene tetramer, respectively. It was further demonstrated that the semi-empirical OMx methods fail to give an accurate description of the excited-state potential energy surfaces as well as the ground-state surface along the test coordinate. This failure could be attributed to an underestimation of overlap-dependent terms. Consequently, it could be shown that the methods are applicable to large intermolecular distances, where the overlap is negligible. The results of DFT calculations with differently composed basis sets suggested that adding an additional single p-function for each atom should significantly improve the performance. QM/MM methods are ideally suited to take the effect of the environment on a a dimer model system into account. However, it was shown that standard force fields also give an incorrect description of the interaction between the monomers along the intermolecular coordinate. This failure was attributed to the isotropic atom-atom interaction in the repulsion term of the Lennard-Jones potential. This was corroborated using two simple proof-of-principle anisotropy models. Therefore, a novel force field called OPLS-AA_O was presented that is based on OPLS-AA, but uses an anisotropic model for the repulsion. The model involves the overlap integral between the molecular densities, which are modeled as a sum of atom-centered p-type Gaussian functions. It was shown that using this force field an excellent agreement with the DFT results can be obtained when the correct parameters are used. These parameters, however, are not very generalizable, which was attributed to the simplicity of the model in its current state (using the same exponential parameter for all atoms). As a short excursion, the applicability of an MO-based overlap model was discussed. It was demonstrated that the repulsion term based on the density overlap can be used to correct the failure of the OMx methods for the ground states. This is in accord with the assumption that an underestimation of the overlap terms is responsible for the failure. It was shown that OPLS-AA_O also gives an excellent description of the longitudinal shift in a PBI tetramer. Using the tetramer as a test system and applying the recipe obtained in the TDDFT benchmark for the QM-part and OPLS-AA_O for the MM-part in conjunction with an electrostatic embedding scheme, a QM/MM description of the excited states of the PBI dimer including the effect of the environment could be obtained. In the last chapter the theoretical description of the Bis(borolyl)thiophene dianion and the excited states of pyracene were discussed. The electronic structure of the Bis(borolyl)thiophene dianion - a negative bipolaron - was elucidated using DFT and CASPT2 methods. Furthermore, an estimation of the extent of triplet admixture to the ground state due to spin-orbit coupling was given. In the second project the S1 and S2 states of pyracene were computed using SCS-CC2 and SCS-ADC(2) and an estimation for the balance between aromaticity and ring strain was given. This also involved computing the vibrational frequencies in the excited states. In both studies the results of the computations were able to rationalize and complete experimental results.}, subject = {Exziton}, language = {en} } @phdthesis{Tebbe2008, author = {Tebbe, David}, title = {Funktionalisierung von Titan(dioxid)oberfl{\"a}chen mit kovalent gebundenem und in Depots eingebrachtem Wirkstoff f{\"u}r den Blutkontakt}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-26579}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2008}, abstract = {Ziel der vorliegenden Arbeit war die Funktionalisierung von Titanoberfl{\"a}chen mit dem Glycosaminoglycan Heparin, um bei Kontakt des Werkstoffs mit Blut die Gerinnungskaskade nicht auszul{\"o}sen und das Material f{\"u}r Stents (Gef{\"a}ßst{\"u}tzen) im arteriellen System einsetzbar zu machen. F{\"u}r die Modifizierungen wurden als Modell der oxidierten Titanoberfl{\"a}che sowohl oxidierte cp-Titanpl{\"a}ttchen als auch TiO2-Pulver verwendet. Heparin kam zum Einsatz, da es sowohl die H{\"a}mostase (Blutgerinnung) als auch die Proliferation ({\"U}berwucherung) mit glatten Muskelzellen unterdr{\"u}ckt und somit eine Restenose (Wiederverengung) des in die verengte Arterie eingebrachten Stents verhindert. Die kovalente Immobilisierung des Wirkstoffs erfolgte {\"u}ber bifunktionale Spacer (Haftvermittlermolek{\"u}le). Spacer waren 3-(Trimethoxysilyl)-propylamin (APMS), N-(2-Aminoethyl)-3-aminopropyltrimethoxysilan (Diamino-APMS) und N1-[3-(Trimethoxysilyl)-propyl]diethylen¬triamin (Triamino-APMS). Der qualitative und quantitative Nachweis der Funktionalisierung von TiO2 mit Haftvermittler bzw. Heparin erfolgte durch schwingungsspektroskopische Methoden, komplexometrische Farbreaktionen sowie der Bestimmung des Zetapotentials im Elektrolytkontakt. Durch die Anbindung von APMS, Di- und Triamino-APMS stieg das Zetapotential von ca. -26 mV auf positive Werte zwischen +41 und +45 mV. Ein Absinken des Zetapotentials belegte die erfolgreiche Anbindung von Heparin (Werte zwischen -39 und -37 mV) an die verschiedenen Haftvermittler, ebenso wie das Vorhandensein der symmetrischen SO3-Valenzschwingung bei 1040 cm-1. Der quantitative Nachweis der immobilisierten Aminogruppen {\"u}ber die Ninhydrinreaktion ergab f{\"u}r die TiO2-Pulver Werte zwischen 17-20 NH2/nm2, wobei die dichteste Funktionalisierung mit APMS und die niedrigste mit Triamino-APMS erzielt werden konnte. Alle Werte lagen im Bereich von Multilayern, da ein Monolayer aus ca. 2 3 NH2/nm2 besteht. Die immobilisierte Menge an Heparin war bei Verwendung von APMS am gr{\"o}ßten (53.3±3.6 ng/cm2) und bei Triamino-APMS am geringsten (32.1±5.7 ng/cm2). Die biologische Wirksamkeit des gebundenen Heparins wurde {\"u}ber das chromogene Substrat ChromozymTH® bestimmt und verblieb bei Anbindung an den Spacer mit der gr{\"o}ßten Molek{\"u}ll{\"a}nge (Triamino-APMS) mit ca. 70\% am wirksamsten. Neben der kovalenten Anbindung des Wirkstoffs an Spacer zielte diese Arbeit auf die Entwicklung von organisch modifizierten, por{\"o}sen SiO2-Wirkstoffdepots (P-MA-PS; Poly-methacryl¬oxy¬propylpolysilsesquioxane) f{\"u}r Heparin ab, die sowohl als Volumenwerkstoffe als auch zur Modifikation von Titan(dioxid)oberfl{\"a}chen anwendbar w{\"a}ren. Die Matrices wurden ausgehend von MAS (Methacryl¬oxypropyl¬trimethoxysilan) {\"u}ber den Sol-Gel Prozeß anorganisch und anschließend {\"u}ber photochemische Polymerisation zus{\"a}tzlich organisch vernetzt. Die Quantifizierung des Polymerisationsgrads erfolgte {\"u}ber die Signalintensit{\"a}t der methacrylischen C=C-Doppelbindung bei 1635 cm-1 durch Integration einer Gauß-Funktion. {\"U}ber den Polymerisationsgrad der organischen Matrix zwischen 0-71\% konnte die Freisetzungskinetik von Heparin je nach therapeutischer Anforderung eingestellt werden. Es konnte gezeigt werden, daß hohe Wirkstoff-Beladungen und niedrige Polymerisationsgrade mit einer schnelleren Freisetzung des Heparins korrelierten, die aufgrund der Endlichkeit des Wirkstoffs im Depot einer Kinetik 1. Ordnung unterlag. Die kumulativ freigesetzten Wirkstoffmengen verhielten sich hierbei proportional zur Wurzel aus der Freisetzungszeit, was dem Higuchi-Modell zur Wirkstofffreisetzung aus por{\"o}sen Matrices mit einem rein Diffusions-kontrollierten Mechanismus entsprach. Die durch Hydrolyse bedingte Degradation der anorganischen Matrix, die UV-VIS-spektroskopisch bei \&\#955; = 220 nm gemessen wurde, folgte einer Kinetik pseudo-0. Ordnung. Da das freigesetzte Heparin seine biologische Wirksamkeit beibehielt, sind P-MA-PS Matrices interessant f{\"u}r klinische Anwendungen, wie z.B. f{\"u}r die Beschichtung von Gef{\"a}ßst{\"u}tzen, die im Blutkontakt stehen.}, subject = {Heparin}, language = {de} } @phdthesis{Tarcea2004, author = {Tarcea, Nicolae}, title = {Light as a universal tool : Microcapsule sizing by elastic light scattering and mineral investigation by in situ Raman spectroscopy}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-9383}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2004}, abstract = {The present work consist of two major parts. The first part, extending over chapters 1, 2, 3 and 4, addresses the design and construction of a device capable of determining the shell thickness and the core size for monolayer spherical particles in a flow. The second part containing chapters 5, 6, 7, 8, 9 and 10, concentrate on the use of Raman spectroscopy as a space application, namely for use as a tool for in situ planetary investigations. This part directly addresses the MIRAS project, a study run under the auspices of Federal Ministry of Education and Research, BMBF and German Aerospace Center, DLR under national registration number 50OW0103. MIRAS stands for "Mineral Investigation by in situ Raman Spectroscopy". Microcapsule Sizing by Elastic Light Scattering The industrial development of processes based on microcapsules depends on the possibility to provide clear and complete information about the properties of these microcapsules. However, the tools for an easy and efficient determination of the microcapsule properties are lacking, several methods being often required to describe adequately the microcapsule behavior. Methods for evaluating the individual size and size distribution of both the core and the shell are required together with methods for measuring the mechanical strength, stability in appli-cation media, permeability of the shell, etc. Elastic light scattering measurements provide a possible way of determining properties such as core size, shell size and refractive index. The design and con-struction of a device capable of measuring the above mentioned parameters for a core-shell particle is the subject of the first part of this thesis. The basic principle of measurement for the device proposed here consists of an-alyzing one particle at a time by recording the elastic light scattering pattern at angles between approx. 60 and 120 grad. By comparing the experimentally recorded phase functions with the previously calculated phase functions stored in a database, the geometry of the scattering object can be identified. In our case the geometry is characterized by two parameters: the shell thickness and the core radius. In chapter 2 a short overview on the methods used for sizing microparticles is given. Different sizing methods are compared, and the advantages and disadvan-tages for the general problem of sizing are shortly discussed. It is observed that all sizing methods that are based on elastic light scattering theories are ensemble methods. Chapter 3 focusses on the theories used for calculating the theoretical scattering patterns with emphasize on the Mie theory. The generalization of Mie theory for layered particles is shortly presented and the far field intensity approximations are discussed. The last chapter (4) of this first part describes the experimental approach for building an automatic microcapsule sizer. The approach started by O. Sbanski [76] with the development of a software packet for calculating and storing theoret-ical phase functions for core-shell particles was continued with the designing and construction of a measuring device. The hardware construction and the software with all implemented corrections imposed by the individual setup components are described in detail. For the laser, the monochromaticity, the intensity profile of the beam as well as the planarity of the equi-phase fronts are taken into consid-eration. The flow cell with three different designs is described, and the influences of the employed design on the light scattering patterns are discussed together with the optical system used for recording the experimental phase functions. The detection system formed by two identical linear CCD arrays is presented together with the software approach used for data acquisition. Ways of improving the quality and the speed of the analyzing process are discussed. The final section presents measurements run on samples made of homogeneous spheres and also on samples containing industrial microcapsules. Mineral Investigation by in situ Raman Spectroscopy The envisaged future planetary missions require space-born instruments, which are highly miniaturized with respect to volume and mass and which have low needs of power. A micro Raman spectrometer as a stand alone device on a planetary surface (e.g. Mars) offers a wide spectrum of possibilities. It can assess the chemical analysis via determination of the mineral composition, detect organic molecules in the soil, identify the principal mineral phases, etc. The technical developments in the last years have introduced a new generation of small Raman systems suitable for robotic mineral characterization on planetary surfaces [20, 95]. Two different types of spectrometer were considered for the MIRAS study. As supporting laboratory experiments for the MIRAS study, the measure-ments on standard minerals and on SNC Mars meteorites are discussed in chapter 6. The following SNC meteorites have been investigated: Sayh al Uhaymir 060, Dar al Gani 735, Dar al Gani 476, Northwest Africa 856, Los Angeles, Northwest Africa 1068 and Zagami. Pyrite as a hitherto undescribed phase in the picritic (olivin-phyric) shergottite NWA 1068 as well as reduced carbon (e.g. graphite) and anatase in the shergottite Say al Uhaymir 060 are new findings for this class of meteorites. A detailed description of the proposed designs for MIRAS, with the compo-nents used for building the test version on a breadboard is covered in chapter 7. The scientific as well as the mission requirements imposed on the instrument are discussed. The basic design is presented and the main components that are brought together to build the device being the laser unit, the Raman head, the Rayleigh filtering box, and the spectral sensor (spectrometer with a matching de-tector) are described. The two proposed designs, one based on an acousto-optic tunable filter (AOTF) and the other based on a dispersive hadamard transform spectrometer are compared to each other. The actual breadboard setup with the detailed description of the components follows in Section 7.3. Further de-velopment of a Raman spectrometer for planetary investigations is proposed in combination with a microscope as part of the Extended-MIRAS project. The software developed for controlling the breadboard version of MIRAS is described in chapter 8 together with a short description of the structure of a relational database used for in house spectra management. The measuring pro-cedures and the data processing steps are presented. Spectra acquired with the MIRAS breadboard version based on the AOTF are shown in chapter 9. The final chapter addresses a rather different possibility of using Raman spectroscopy for planetary investigations. The chapter summarizes the content of four tech-nical notes that were established within the study contracted by the European Space Agency with firma Kayser-Threde in Munich concerning the possibility of applying Raman spectroscopy in the field of remote imaging.}, language = {en} } @phdthesis{Suess2021, author = {S{\"u}ß, Jasmin}, title = {Theoretische Untersuchungen an molekularen Aggregaten: 2D-Spektroskopie und Exzitonendynamik}, doi = {10.25972/OPUS-24713}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-247136}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {Diese Dissertation besch{\"a}ftigt sich mit der Exzitonendynamik molekularer Aggregate, die nach Mehrphotonen-Anregung auf ultrakurzer Zeitskala stattfindet. Hierbei liegt der Fokus auf der Charakterisierung der Exziton-Exziton-Annihilierung (EEA) mithilfe von zweidimensionaler optischer Spektroskopie f{\"u}nfter Ordnung. Dazu werden zwei verschiedene Modellsysteme implementiert: Das elektronische Homodimer und das elektronische Homotrimer-Modell, wobei Letzteres eine Erweiterung des Dimer-Modells darstellt. Die Kopplung des quantenmechanischen Systems an die Umgebung wird mithilfe des Quantum-Jump-Ansatzes umgesetzt. Besonderes Interesse kommt der Analyse des Signals f{\"u}nfter Ordnung in Abh{\"a}ngigkeit der Populationszeit T zu. Anhand des Dimer-Modells als kleinstm{\"o}gliches Aggregat lassen sich bereits gute Vorhersagen auch {\"u}ber das Verhalten gr{\"o}ßerer molekularer Aggregate treffen. Der Zerfall des oszillierenden Signals f{\"u}r lange Populationszeiten korreliert mit der EEA. Dies zeigt, dass die zweidimensionale optische Spektroskopie genutzt werden kann, um den Annihilierungsprozess zu charakterisieren. Innerhalb des Modells des Dimers wird weiterhin der Einfluss der Intraband-Relaxation untersucht. Zunehmende Intraband-Relaxation verhindert den Austausch zwischen den lokalen Zust{\"a}nden, der essentiell f{\"u}r den Annihilierungsprozess ist, und die EEA wird blockiert. Das elektronische Trimer-Modell erweitert das Dimer-Modell um eine Monomereinheit. Somit befinden sich die Exzitonen im Anschluss an die Anregung nicht mehr unvermeidlich nebeneinander. Es gibt somit eine Konfiguration, bei der sich die Exzitonen zun{\"a}chst zueinander bewegen m{\"u}ssen, bevor die Startbedingung des Annihilierungsprozesses gegeben ist. Dieser zus{\"a}tzliche Schritt wird auch Exzitonendiffusion genannt. Die Ergebnisse dieser Arbeit legen nahe, dass das erwartete Verhalten nur zu sehr kurzen Zeiten im Femtosekundenbereich auftritt und somit die Zeitskala der Exzitonendiffusion im Falle des Trimers nicht sichtbar wird. Es bedarf demnach eines gr{\"o}ßeren Modellsystems, bei dem sich der Effekt der zeitverz{\"o}gert eintretenden EEA deutlich in der Zerfallsdynamik manifestieren kann.}, subject = {Molekulardynamik}, language = {de} } @phdthesis{Szeghalmi2005, author = {Szeghalmi, Adriana Viorica}, title = {The ground and excited state molecular structure of model systems undergoing photochemical processes and the characterization of active agents by means of vibrational spectroscopy and theoretical calculations}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-11961}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2005}, abstract = {The present thesis reports about vibrational and quantum chemical investigations on model systems undergoing photochemical processes and pharmaceutically active compounds, respectively. Infrared (IR) and Raman spectroscopy were applied for the characterization of the ground state molecular structure. Moreover, resonance Raman (RR) spectra contain additional information about the resonantly enhanced excited state molecular structure. A quantitative resonance Raman intensity analysis in conjunction with the simultaneous simulation of the absorption spectra by means of time-dependent propagation methods was accomplished in order to extract valuable information about the excited state molecular structures of the investigated systems. Surface enhanced Raman scattering (SERS) allows one to determine the interaction and adsorption site of active agents on a metal substrate. Furthermore, density functional theory (DFT) and potential energy distribution (PED) calculations were carried out for an exact assignment of the vibrational spectra. Complete active space self consistent field (CASSCF) and configuration interaction (CI) calculations for some model systems were also performed to assess the experimental results on the excited state potential surfaces. The fundamentals of resonance Raman spectroscopy are treated in detail, describing the physical processes and emphasizing the theoretical methodologies which allow one to obtain the information about the resonantly excited state via an RR intensity analysis. The Brownian oscillator model to determine the solvent reorganization energy is briefly presented. Furthermore, the SERS enhancement mechanisms and selection rules to determine the orientation of the molecules adsorbed on the metal substrate are discussed. The Hartree-Fock approach to calculate the ground state geometry is expatiated, and the basic characteristics of the CI and CASSCF calculations are specified. The chapter ends with a short description of the DFT calculations. Chapter 4 deals with the investigation of the excited state intramolecular proton transfer of the model system, 1-hydroxy-2-acetonaphthone (HAN). The vibrations showing the highest displacement parameters correspond to stretching and in-plane deformation modes of the naphthalene ring and the conjugated carbonyl group, while the OH stretching mode exhibits no observable enhancement. The cooperative effect of the skeletal vibrations reduces the distance between the carbonyl and hydroxyl oxygen atoms in accordance with a general electron density redistribution. Hence, the leading force in the proton transfer process is the increase in electron density on the carbonyl group and the decrease of the negative charge on the hydroxyl oxygen. In chapter 5 the structural and vibrational characteristics of the organic mixed valence system N,N,N',N'-tetraphenylphenylenediamine radical cation (1+) are discussed. The resonance Raman measurements showed that at least eight vibrational modes are strongly coupled to the optical charge transfer process in (1+). These Franck-Condon active modes were assigned to symmetric vibrations. The most enhanced band corresponds to the symmetric stretching mode along the N-phenylene-N unit and exhibits the largest vibrational reorganization energy. Nevertheless, symmetric stretching modes of the phenylene and phenyl units as well as deformation modes are also coupled to the electronic process. The total vibrational reorganization energy of these symmetrical modes is dominant, while the solvent induced broadening and reorganization energy are found to be small. Hence, (1+) adopts a symmetrical delocalized Robin-Day Class III structure in the ground state. Chapter 6 reports about a vibrational spectroscopic investigation of a model organic photorefractive thiophene derivative, 2-(N,N-diethylamino)-5-(2',2'-dicyanovinyl)-thiophene. The geometry of the first excited state were optimized and the FC parameters were calculated using the configuration interaction with single excitations method. These calculations show that the contribution of the zwitterionic structure to the excited state is significantly higher than in the ground state. The resonance Raman spectra indicate that several stretching modes along the bonds connecting the donor and acceptor moieties as well as the S-C stretching vibrations are enhanced. Chapter 7 presents the vibrational analysis of an aziridinyl tripeptide, a cysteine protease inhibitor active drug. The vibrational analysis reveals stronger H-bonding of the aziridine NH unit in the solid state of the aziridinyl tripeptide than in the liquid electrophilic building block, indicating medium strong intermolecular H-bond interactions in the crystal unit. The amide hydrogen atoms of the aziridinyl tripeptide are involved in weaker H-bonds than in an epoxide analogon. Furthermore, the characteristic vibrational modes of the peptide backbone were discussed. Chapter 8 reports on the adsorption mechanism of two related anti-leukemia active agents, 6-mercaptopurine (6MP) and 6-mercaptopurine-ribose (6MPR) on a silver colloid. Both molecules adsorb through the N1 and possibly S atom on the metal surface under basic conditions. The SERS spectra recorded for acidic pH values showed that the ribose derivative exhibits a different adsorption behavior compared to the free base. 6MP probably adsorbs on the silver sol through the N9 and N3 atoms, while 6MPR interacts with the surface via the N7 and probably S atoms. Around critical biological concentrations and pH values i.e. at low concentrations and almost neutral condition (pH 7-9), 6MPR interacts with the substrate through both N7 and N1 atoms, possibly forming two differently adsorbed species, while for 6MP only the species adsorbed via N1 was evidenced.}, subject = {Photochemie}, language = {en} } @phdthesis{Strehle2003, author = {Strehle, Marion A.}, title = {Mikroskopische und spektroskopische Charakterisierung biologisch relevanter Oberfl{\"a}chen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-5775}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2003}, abstract = {In dieser Arbeit werden biologisch relevante Oberfl{\"a}chen untersucht, die in der Medizin bzw. in der Biologie eine wichtige Rolle spielen. Die Proteinadsorption auf Implantat-Oberfl{\"a}chen wurde charakterisiert, um wichtige Informationen {\"u}ber den Adsorptionsprozess zu erhalten. Das Fernziel hierbei ist, durch ein umfassendes Wissen {\"u}ber diesen f{\"u}r die Implantation wichtigen Schritt Biomaterialien mit m{\"o}glichst hoher Gewebevertr{\"a}glichkeit zu entwickeln. Die Verteilung von Propolis auf der Wachs-Oberfl{\"a}che von Bienenwaben wurde untersucht, um mehr {\"u}ber dessen Nutzen, der noch nicht vollst{\"a}ndig aufgekl{\"a}rt ist, zu erfahren und um auf m{\"o}gliche Auswirkungen einer ver{\"a}nderten Wabenstruktur auf die Kommunikation der Honigbienen R{\"u}ckschl{\"u}sse ziehen zu k{\"o}nnen. Das Ziel des ersten Teils dieser Arbeit war, das Adsorptionsverhalten der Proteine Fibrinogen, Albumin und Fibronektin auf Titandioxid, einem in der Medizin h{\"a}ufig als Implantat eingesetzten Material, zu studieren. Die Adsorption von Proteinen auf der Oberfl{\"a}che von Implantaten ist ein wichtiger Schritt f{\"u}r die Gewebevertr{\"a}glichkeit bzw. Biokompatibilit{\"a}t dieser Materialien. Es wurden sowohl die r{\"a}umliche Verteilung der Proteine auf den Implantat-Oberfl{\"a}chen als auch die durch die Adsorption hervorgerufenen strukturellen Ver{\"a}nderungen der Proteine untersucht. Als Methoden wurden hierf{\"u}r die Laser-Raster-Mikroskopie (LSM), die Kraftfeldmikroskopie (AFM) sowie die Raman-Spektroskopie eingesetzt. Durch ein umfassendes Wissen {\"u}ber den Adsorptionsprozess der Proteine auf Implantat-Materialien k{\"o}nnen die Oberfl{\"a}chen der Implantate dahingehend ver{\"a}ndert werden, dass es zu einer besseren Proteinadsorption und dadurch zu einer noch geringeren Rate an Abstoßungsreaktionen kommt. Die in dieser Arbeit vorgestellten Ergebnisse k{\"o}nnen einen Teil zum Verst{\"a}ndnis des Adsorptionsprozesses beitragen. Das Ziel des zweiten Teils dieser Arbeit war es, die chemische Zusammensetzung von Propolis (dem Kittharz der Bienen) und Wabenwachs von Apis mellifera carnica Pollm. sowie die r{\"a}umliche Verteilung von Propolis auf den Waben-Oberfl{\"a}chen zu untersuchen. Hierzu wurden die Raman-Spektroskopie und Raman-Mapping eingesetzt. Es wurden zun{\"a}chst Raman-Spektren von Propolis-Proben sowie Raman-Spektren von charakteristischen Standardsubstanzen des Propolis aufgenommen. Das Propolis-Spektrum sowie das Wachs-Spektrum wurden durch eine Auswahl an Standardsubstanzen simuliert. Um herauszufinden, welche Harze von den Bienen gesammelt und als Propolis im Stock verwendet werden, wurden von einigen Harzen, die als Propolis-Quellen in Betracht kommen, Raman-Spektren aufgenommen. Es wurde auch analysiert, ob die Kettenl{\"a}ngen der Alkane, aus denen die Wachse bestehen, einen Einfluss auf die Raman-Spektren hat. Mittels Raman-Mapping wurde schließlich die r{\"a}umliche Verteilung von Propolis auf der Waben-Oberfl{\"a}che untersucht. Die hier charakterisierten biologisch relevanten Oberfl{\"a}chen spielen eine wichtige Rolle in der Medizin und in der Biologie. Die Analyse mit mikroskopischen und spektroskopischen Methoden verschafft einen Einblick in die Prozesse, die sich an diesen Oberfl{\"a}chen abspielen. Die Proteinadsorption auf Implantat-Oberfl{\"a}chen sind f{\"u}r die Implantationsmedizin von Bedeutung. Es werden st{\"a}ndig neue Materialien entwickelt, die eine m{\"o}glichst gute Biokompatibilit{\"a}t aufweisen sollen. Erkenntnisse {\"u}ber die Prozesse, die hierf{\"u}r eine Rolle spielen, helfen bei der Entwicklung neuer Materialien. Die Verteilung von Propolis auf den Wachs-Oberfl{\"a}chen hat einen Einfluss auf die Materialbeschaffenheit der Waben. Dies k{\"o}nnte die Vibrationsweiterleitung beim Schw{\"a}nzeltanz der Honigbienen, der f{\"u}r deren Kommunikation von Bedeutung ist, beeinflussen. Die Verteilung des Propolis auf den Waben konnte f{\"u}r kleine Ausschnitte gezeigt werden. Inwiefern eine Propolisschicht auf den Stegen der Waben die Vibrationsweiterleitung tats{\"a}chlich beeinflusst, muss durch weiterf{\"u}hrende Experimente herausgefunden werden.}, subject = {Implantat}, language = {de} } @phdthesis{Stich2012, author = {Stich, Dominik}, title = {Zur Exziton- und Ladungstr{\"a}gerdynamik in einwandigen Kohlenstoffnanor{\"o}hren}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-70193}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {In dieser Dissertation wurde die Exziton- und Ladungstr{\"a}gerdynamik in halbleitenden und metallischen einwandigen Kohlenstoffnanor{\"o}hren (SWNTs) mittels zeitkorreliertem Einzelphotonenz{\"a}hlen (TCSPC) und transienter Absorptionsspektroskopie untersucht. Die Experimente wurden an Tensid- oder DNA-stabilisierten SWNT-Proben in Suspension durchgef{\"u}hrt, in denen durch Dichtegradientenultrazentrifugation (DGU) halbleitende (6,5)-R{\"o}hren oder metallische (9,9)-R{\"o}hren angereichert wurden. F{\"u}r die Herstellung der metallischen SWNT-Proben wurde das DGU-Verfahren optimiert. Metallische SWNT-Proben wiesen eine Verunreinigung von etwa 3\% halbleitenden SWNTs auf. Von den angereicherten metallischen SWNTs war die (9,9)-R{\"o}hre mit einem relativen Anteil von 40\% die vorherrschende Chiralit{\"a}t. F{\"u}r transiente Absorptionsmessungen wurden die metallischen SWNT-Proben zudem durch Filtration aufkonzentriert. Halbleitende (6,5)-Proben wurden mit einem standardm{\"a}ßig verwendeten Rezept hergestellt. Mit TCSPC-Messungen an (6,5)-Proben wurde erstmals gezeigt, dass halbleitende SWNTs neben der kurzlebigen Fluoreszenz des S1-Exzitons, die auf der ps-Zeitskala abl{\"a}uft, auch eine langlebig Fluoreszenzkomponente aufweisen. Diese klingt mit t^-1 ab und stammt ebenfalls aus dem S1-Exzitonzustand. Das relative Gewicht der langlebigen Komponente an der Quantenausbeute betr{\"a}gt (7 ± 2)\%. Bei der langlebige Fluoreszenzkomponente handelt es sich um verz{\"o}gerte Fluoreszenz. Diese entsteht durch die Wiederbesetzung des S1-Zustands aus einem tiefergelegenen Triplettzustand. Der vorherrschende Zerfall des Tripletts skaliert mit t^-0,5 und ist auf das nicht-Fick'sche Diffusionsverhalten der Tripletts zur{\"u}ckzuf{\"u}hren, die an St{\"o}rstellen gefangen werden und abreagieren. Wird vor dem {\"U}bergang in den Grundzustand ein weiteres Triplett eingefangen, so kommt es zu einer Triplett-Triplett-Annihilation, die eine Wiederbesetzung des S1-Zustandes bewirkt. F{\"u}r die transienten Absorptionsexperimente wurde ein Messaufbau verwirklicht, der Anregung und Abfrage im VIS und NIR Spektralbereich mit einer Zeitaufl{\"o}sung von bis zu 50 fs erm{\"o}glicht. Die Detektion des Abfragelichts erfolgt spektral aufgel{\"o}st mit einer CCD-Kamera. Der Aufbau erm{\"o}glicht Nachweisempfindlichkeiten von bis zu 0,2 mOD bei einer Integrationszeit von einer Sekunde. Durch unterschiedliche Modulation von Anregungs- und Abfragestrahl ist eine Detektion auf der Differenzfrequenz der Modulationen m{\"o}glich, wodurch Einfl{\"u}sse des Anregungslichts im Abfragespektrum effizient unterdr{\"u}ckt werden. In transienten Absorptionsexperimenten wurde die Exziton- und Ladungstr{\"a}gerdynamik der (9,9)-R{\"o}hre untersucht. Die transienten Absorptionsdaten wurden mit einer globalen Fitroutine angepasst, der ein Vierniveausystem zugrunde lag. Aus dem globalen Fit sind die Photoanregungsspektren (PAS) - die Beitr{\"a}ge der drei angeregten Niveaus zu den transienten Absorptionsspektren - sowie die Zerfallszeiten zug{\"a}nglich. Die PAS sind durch die Exzitonresonanz gekennzeichnet. Breite PB-Banden aufgrund der Besetzungs{\"a}nderung der linearen E00-B{\"a}nder sind im Gegensatz zu transienten Absorptionsmessungen an Graphen oder Graphit nicht erkennbar. Die PAS des schnellen und mittleren Zerfalls sind {\"a}hnlich und weisen eine starkes PB-Signal bei der Energie des M1-Exzitons der (9,9)-R{\"o}hre auf, das von PA-Banden bei h{\"o}heren undtieferen Energien begleitet wird. Der langsame Zerfall ist hingegen durch eine blauverschobene PB-Bande gekennzeichnet, die nur auf der niederenergetischen Seite mit einem PA-Signal einhergeht. Die Zerfallszeiten nehmen mit steigender Anregungsleistung zu und liegen im Bereich von 30 fs bis 120 fs, 500 fs bis 1000 fs und 40 ps. Die schnelle Zerfallskomponente wird mit der Dissoziation der Exzitonen sowie der Thermalisierung der freien Ladungstr{\"a}gen in den linearen Leitungsb{\"a}ndern zu einer heißen Ladungstr{\"a}gerverteilung assoziiert. Die mittlere Zerfallskomponente beschreibt die Abk{\"u}hlung und Rekombination der freien Elektronen und L{\"o}cher. Entscheidender Mechanismus ist hierbei die Streuung an hochenergetischen optischen Phononmoden. Die langsame Zerfallskomponente kann durch langlebige, wahrscheinlich an St{\"o}rstellen gefangene Ladungstr{\"a}ger erkl{\"a}rt werden, deren elektrische Felder durch den Stark-Effekt das ableitungs{\"a}hnliche transiente Absorptionsspektrum erzeugen. Mittels transienter Absorptionsmessungen an (6,5)-R{\"o}hren wurde aus dem anregungsleistungsabh{\"a}ngigen maximalen PB-Signal des S1-Exzitons die Gr{\"o}ße des S1-Exzitons zu (7,2 ± 2,5) nm bestimmt. Aus dem Vergleich der leistungsabh{\"a}ngigen maximalen PB-Signale bei Anregung in das S1- und das S2-Exziton ergibt sich, dass die Konversionseffizienz aus dem S2- in den S1-Zustand 1 ± 0,1 betr{\"a}gt und innerhalb der experimentellen Zeitaufl{\"o}sung von 60 fs vollst{\"a}ndig abl{\"a}uft. Die Exzitongr{\"o}ße in metallischen (9,9)-R{\"o}hren wurde bei Exzitonlebensdauern von 15 fs bis 30 fs zu etwa 7 nm bis 12 nm abgesch{\"a}tzt.}, subject = {Kohlenstoff-Nanor{\"o}hre}, language = {de} } @phdthesis{Steinbauer2012, author = {Steinbauer, Michael Christoph}, title = {Ionen- und Elektronenimaging reaktiver Molek{\"u}le: Ethyl, Propargylen und Fulvenallenyl}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-75649}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {Bei Verbrennungsprozessen im Otto-Motor, beim Raffinationsprozess in Erd{\"o}lraffinerien, im interstellaren Raum oder in der Chemie der Erdatmosph{\"a}re spielen Molek{\"u}le, wie sie in dieser Arbeit untersucht wurden, eine wichtige Rolle. Allerdings stellt es eine große Herausforderung dar, solch reaktive Substanzen zu erzeugen und zu handhaben. Um das Ethyl-Radikal, ein wichtiges Intermediat z.B. in der Erzeugung von Ethylen, zu untersuchen, wurde eine bestehende Apparatur modifiziert. Diese erm{\"o}glicht es, die Geschwindigkeitsverteilung der Fragmente (Ionen oder Elektronen) zweidimensional aufzuzeichnen, die nach der Anregung mittels Laserlicht durch Photodissoziation entstehen. Diese velocity-map imaging Apparatur wurde in einem ersten Schritt mittels der Photodissoziation von Pyrrol bei 240 nm kalibriert. Cycloheptatrien konnte erfolgreich auf seine Photodissoziation untersucht werden, was als Test des VMI-Experiment genutzt wurde. Die gewonnenen Ergebnisse stimmten mit Resultaten {\"u}berein, welche durch Doppler-Fragmentspektroskopie in dieser und fr{\"u}heren Arbeiten gewonnen wurden. Zwischen 11 und 13 \% der {\"U}berschussenergie gehen dabei in die Translation des H-Atoms. • Das Ethyl-Radikal zeigte, als das erste mit unserer VMI-Apparatur untersuchte Radikal, eine interessante Photodissoziation: Wird es bei 250 nm angeregt, ergeben sich zwei Dissoziationskan{\"a}le, wobei ein bekannter Kanal nach schneller interner Konversion in den Grundzustand Fragmente mit geringer Translationsenergie erzeugt. Der zweite Kanal zeigt anisotropes Verhalten und erzeugt Wasserstoffatome mit hoher Translationsenergie, die mehr als die H{\"a}lfte der {\"U}berschussenergie abf{\"u}hren. Die Erkl{\"a}rung dieses Prozesses erweist sich schwierig in Anbetracht von durchgef{\"u}hrten Isotopenmarkierungsexperimenten sowie der beobachteten Ratenkonstanten f{\"u}r die Photodissoziation. Eine Interaktion von Valenz- und Rydbergzust{\"a}nden im Ethyl-Radikal k{\"o}nnte eine Erkl{\"a}rung darstellen. In Zukunft kann beim VMI-Experiment in W{\"u}rzburg versucht werden, die Aufl{\"o}sung weiter zu verbessern. Dabei erg{\"a}ben sich im Idealfall zwei scharfe Ringe der H-Atome durch die Spin-Bahn-Aufspaltung von Brom, welche eine sehr genaue Kalibrierung erm{\"o}glichen. Neben den Ergebnissen auf dem Gebiet der Photodissoziation, die mit der VMI-Apparatur erzielt wurden, konnten mittels Synchrotronstrahlung und Aufzeichnen der Photoelektronen mittels VMI und der TPEPICO-Technik die folgenden Ergebnisse erhalten werden: • Von Propargylen, einem von drei C3H2 Isomeren, konnte die adiabatische Ionisierungsenergie (IEad) mit 8.99 eV bestimmt werden. Der Vorl{\"a}ufer Diazopropin, eine sehr instabile Substanz, wurde dazu synthetisiert und mit Synchrotronlicht untersucht. Allerdings war es nicht m{\"o}glich, die Schwingungen im Kation oder die dissoziative Photoionisation (DPI) des Carbens zu untersuchen, da Diazopropin seinerseits bereits bei Energien von 9 eV durch DPI zerf{\"a}llt. Allerdings konnte ein Peak im TPES des zyklischen Isomers aus einer fr{\"u}heren Messung eindeutig dem Propargylen zugeordnet werden. Ein Ausweg die DPI zu umgehen stellt die Verwendung eines anderen Vorl{\"a}ufers dar. Beispielsweise wurde dazu Propargylchlorid getestet, welches aber nicht das Propargylen erzeugt, sondern das zyklische Isomer Cyclopropenyliden. Daneben k{\"o}nnen durch ein Doppel-Imaging Experiment, bei dem die Ionen genauso wie die Elektronen mit einem bildgebenden Detektor aufgezeichnet werden, Ionen mit kinetischer Energie aus DPI von Ionen aus der Ionisation ohne kinetischer Energie unterschieden werden. • Von den substituierten Methyl-Radikalen Brommethyl sowie Cyanomethyl konnte die IEad (8.62 bzw. 10.28 eV) und vom Brommethyl die DPI (AE0K = 13.95 eV) bestimmt werden. Daraus konnte der Einfluss der Substituenten auf die IEad im Vergleich zum Methyl-Radikal (IE = 9.84 eV) gezeigt werden. Das zeigt, dass der Brom-Substituent das Kation, der Cyano-Rest dagegen das Radikal stabilisiert. Ebenso konnten aus den Ergebnissen beim Brommethyl thermodynamische Daten wie die Standardbildungsenthalpie des Radikals (ΔH0f= 174.5 kJ/mol) oder Bindungsenergien gewonnen werden. Letztere betragen 334 kJ/mol f{\"u}r die C-Br Bindung im Brommethyl-Radikal sowie 505 kJ/mol im Kation. • Das Fulvenallen (C7H6) wurde aus Phthalid durch Pyrolyse erzeugt und dessen IEad mit 8.22 eV bestimmt. Schwingungen konnten im Kation aufgel{\"o}st und zugeordnet werden. Außerdem konnte erstmals die IEad des Fulvenallenyl-Radikals (C7H5) mit 8.19 eV festgelegt werden. Im Vergleich zu fr{\"u}heren Messungen zeigte sich, dass aus Toluol in der Pyrolyse ebenfalls die beiden C7H5/C7H6 Isomere entstehen. Um verschiedene C7H5/C7H6 Isomere in einem Verbrennungsprozess zu unterscheiden, w{\"a}re es vorteilhaft, experimentell bestimmte Ionisierungsenergien von anderen Isomeren zu kennen.}, subject = {Radikal }, language = {de} } @article{SteinbacherBubackNuernbergeretal.2012, author = {Steinbacher, Andreas and Buback, Johannes and N{\"u}rnberger, Patrick and Brixner, Tobias}, title = {Precise and rapid detection of optical activity for accumulative femtosecond spectroscopy}, series = {Optics Express}, journal = {Optics Express}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-85913}, year = {2012}, abstract = {We present polarimetry, i.e. the detection of optical rotation of light polarization, in a configuration suitable for femtosecond spectroscopy. The polarimeter is based on common-path optical heterodyne interferometry and provides fast and highly sensitive detection of rotatory power. Femtosecond pump and polarimeter probe beams are integrated into a recently developed accumulative technique that further enhances sensitivity with respect to single-pulse methods. The high speed of the polarimeter affords optical rotation detection during the pump-pulse illumination period of a few seconds. We illustrate the concept on the photodissociation of the enantiomers of methyl p-tolyl sulfoxide. The sensitivity of rotatory detection, i.e. the minimum rotation angle that can be measured, is determined experimentally including all noise sources to be 0.10 milli-degrees for a measurement time of only one second and an interaction length of 250 μm. The suitability of the presented setup for femtosecond studies is demonstrated in a non-resonant two-photon photodissociation experiment.}, language = {en} } @phdthesis{Stehr2015, author = {Stehr, Vera}, title = {Prediction of charge and energy transport in organic crystals with quantum chemical protocols employing the hopping model}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-114940}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {As organic semiconductors gain more importance for application, research into their properties has become necessary. This work investigated the exciton and charge transport properties of organic semiconducting crystals. Based on a hopping approach, protocols have been developed for the calculation of Charge mobilities and singlet exciton diffusion coefficients. The protocols do not require any input from experimental data except for the x-ray crystal structure, since all needed quantities can be taken from high-level quantum chemical calculations. Hence, they allow to predict the transport properties of yet unknown compounds for given packings, which is important for a rational design of new materials. Different thermally activated hopping models based on time-dependent perturbation theory were studied for the charge and exciton transport; i. e. the spectral overlap approach, the Marcus theory, and the Levich-Jortner theory. Their derivations were presented coherently in order to emphasize the different levels of approximations and their respective prerequisites. A short reference was made to the empirical Miller-Abrahams hopping rate. Rate equation approaches to calculate the stationary charge carrier mobilities and exciton diffusion coefficients have been developed, which are based on the master equation. The rate equation approach is faster and more efficient than the frequently used Monte Carlo method and, therefore, provides the possibility to study the anisotropy of the transport parameters and their three-dimensional representation in the crystal. The Marcus theory, originally derived for outer sphere electron transfer in solvents, had already been well established for charge transport in organic solids. It was shown that this theory fits even better for excitons than for charges compared with the experiment. The Levich-Jortner theory strongly overestimates the charge carrier mobilities and the results deviate even stronger from the experiment than those obtained with the Marcus theory. The latter contains larger approximations by treating all vibrational modes classically. The spectral overlap approach in combination with the developed rate equations leads to even quantitatively very good results for exciton diffusion lengths compared to experiment. This approach and the appendant rate equations have also been adapted to charge transport. The Einstein relation, which relates the diffusion coefficient with the mobility, is important for the rate equations, which have been developed here for transport in organic crystals. It has been argued that this relation does not hold in disordered organic materials. This was analyzed within the Framework of the Gaussian disorder model and the Miller-Abrahams hopping rate.}, subject = {Exziton}, language = {en} } @phdthesis{Siebert2002, author = {Siebert, Torsten Uwe}, title = {Four-Wave Mixing Techniques Applied to the Investigation of Non-Adiabatic Dynamics in Polyatomic Molecules}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-2456}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2002}, abstract = {In the experiments presented in this work, third-order, time-resolved spectroscopy was applied to the disentanglement of nuclear and electronic degrees of freedom in polyatomic molecules. The motivation for approaching this problem was given by the decisive role that the coupling of nuclear and electronic dynamics plays in the mechanism of photochemical reactions and photobiological processes. In order to approach this complex problem, different strategies within the framework of time-resolved, four-wave mixing spectroscopy were developed that allowed for the dynamic as well as the energetic aspects of vibronic coupling in non-radiative transitions of polyatomic molecules to be addressed. This was achieved by utilizing the influence of optical as well as Raman resonances on four-wave mixing processes. These resonance effects on third-order, optical processes allow for a high selectivity to be attained with respect to the interrogation of specific aspects of molecular dynamics. The development of different strategies within the framework of time-resolved, four-wave mixing spectroscopy for addressing the problem of vibronic coupling began with the experiments on gaseous iodine. This simple, well investigated molecular system was chosen in order to unambiguously characterize the effect of Raman resonances on four-wave mixing processes. A time-resolved degenerative four-wave mixing (DFWM) experiment was carried out on gaseous iodine that allowed for the dynamics of coherent Stokes Raman scattering (CSRS) as well as a coherent anti-Stokes Raman scattering (CARS) to be observed parallel to the dynamics of a DFWM process at different spectral positions of the FWM signal. Here, the state-selectivity of these different FWM processes manifests itself in the vibrational wave packet dynamics on different electronic potentials of iodine. It could be shown that Raman resonances determine the selectivity with which these FWM processes prepare and interrogate nuclear dynamics in different electronic states. With the insight gained into the relevance of Raman resonant processes in FWM spectroscopy, an experimental scheme was devised that utilizes this effect to selectively interrogate the dynamics of a specific vibrational mode within a polyatomic molecule during a radiationless electronic transition. Here, a CARS process was employed to selectively probe specific vibrational modes of a molecular system by variably tuning the energy difference between the lasers involved in the CARS process to be in Raman resonance with the vibrational energy spacing of a particular vibrational mode. Using this aspect of a tunable resonance enhancement within a CARS scheme, this optical process was incorporated in a time-resolved pump-probe experiment as a mode-selective probe mechanism. This type of experimental configuration, that employs four pulsed laser fields, was classified as a pump-CARS scheme. Here, a laser pulse independent of the CARS process initiates the molecular dynamics that are interrogated selectively with respect to the vibrational mode of the system through the simultaneous interaction of the three pulsed fields involved in the CARS process. Time-resolution on a femtosecond timescale is achieved by introducing a time delay between the independent pump laser and the laser pulses of the CARS process. The experimental configuration of a pump-CARS scheme was applied to the study of the nuclear dynamics involved in the radiationless electronic transition between the first excited singlet state (S1) and the electronic ground state (S0) of all-trans-b-carotene. The mode-selective CARS probe allowed for the characteristic timescale with which specific vibrational modes are repopulated in the S0 state to be determined. From the varying repopulation times of specific vibrational modes, a mechanism with which the full set of vibrational states of the S0 potential are repopulated subsequent to the internal conversion process could be postulated. Most importantly, the form of nuclear motion that primarily funnels the population between the two electronic states could be identified as the C=C symmetric symmetric stretch mode in the polyene backbone of b-carotene. With this, the reaction coordinate of this radiationless electronic transition could be identified. The experiment shows, that the CARS probe is capable of determining the nuclear motion coupled to a radiationless electronic transition in complex polyatomic systems. The S1/S0 internal conversion process in b-carotene was further investigated with time-resolved transient gratings. Here, the energetic aspects of a non-adiabatic transition was addressed by determining the influence of the vibrational energy on the rate of this internal conversion. In order to compare the rate of internal conversion taking place out of vibrational ground state modes versus this transition initiating out of vibrationally hot modes, the strategy of shifting the probe mechanism in the transient grating scheme to spectral positions within and out of the red flank of the S1 absorption profile was pursued. The interrogation of different vibrational states was verified by determining the degree of vibrational cooling, taking place parallel to the internal conversion process. With this strategy, it could be shown that vibrationally hot states contribute to the internal conversion with a higher rate than vibrational ground state modes. In summary, different third-order, optical processes in the framework of time-resolved FWM were applied to the study of non-adiabatic dynamics in polyatomic molecules. By utilizing the effect of optical as well as Raman resonances on different FWM processes, it could be shown that third-order, time-resolved spectroscopy is a powerful tool for gaining insight into complex molecular dynamics such as vibronic coupling. The experiments presented in this work showed that the CARS process, as a mode-selective probe in time-resolved experiments, is capable of disentangling nuclear and electronic dynamics.}, subject = {Provitamin A}, language = {en} } @phdthesis{Settels2012, author = {Settels, Volker}, title = {Quantum chemical description of ultrafast exciton self-trapping in perylene based materials}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-69861}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {Im Rahmen dieser Dissertation wurden sehr lange Exzitonen-Diffusionsl{\"a}ngen (LD) unter idealen Bedingungen f{\"u}r Perylen-basierte Materialien simuliert. Dies ist ein Indiz daf{\"u}r, dass die sehr kurzen LD in realen Materialien aus einer extrinsischen sowie einer intrinsischen Immobilisierung resultieren. Letztere basiert auf einer Relaxation in sogenannten „Self-Trapping"-Zust{\"a}nde. Ein tieferes Verst{\"a}ndnis der dem Self-Trapping zugrunde liegenden atomistischen Prozesse ist notwendig, um zuk{\"u}nftig Materialien mit langen LD entwickeln zu k{\"o}nnen, bei denen eine intrinsische Exzitonen-Immobilisierung verhindert wird. F{\"u}r die Entwicklung eines solchen mechanistischen Verst{\"a}ndnisses ist das Vorliegen einer eindeutigen Korrelation zwischen der molekularen Anordnung und der LD unabdingbar. Diese weisen Einkristalle von Diindenoperylen (DIP) und α-Perylen-tetracarboxyl-anhydrid (α-PTCDA) auf. Bei ersteren wurde eine außergew{\"o}hnlich lange LD von 90 nm und bei letzteren nur 22 nm gemessen. Teil dieser Arbeit war es, Gr{\"u}nde f{\"u}r diesen Unterschied in der LD zu finden. Nur Self-Trapping kommt als Ursache in Frage. Aus diesem Grund eignen sich diese Materialien, um ein atomistisches Verst{\"a}ndnis des Self-Trappings exemplarisch an ihnen zu erarbeiten. Mutmaßlich k{\"o}nnten Differenzen in der elektronischen Struktur in DIP und α-PTCDA f{\"u}r das unterschiedliche Self-Trapping verantwortlich sein. Allerdings konnte gezeigt werden, dass es f{\"u}r viele Perylen-basierte Materialien keine signifikanten Unterschiede in der elektronischen Struktur gibt, wodurch diese f{\"u}r die Aufkl{\"a}rung von Immobilisierungsmechanismen zu vernachl{\"a}ssigen sind. Eine weitere m{\"o}gliche Begr{\"u}ndung w{\"a}re in Polarisationseffekten im Kristall zu suchen, welche die elektronische Struktur in Perylen-basierten Materialien unterschiedlich beeinflussen. Vor allem ihr Einfluss auf Ladungstrennungs-Zust{\"a}nde (CT), die oberhalb des optisch hellen Frenkel-Zustandes liegen, war fraglich, weil sie energetisch abgesenkt werden k{\"o}nnten. Ein signifikanter Einfluss von Polarisationseffekten konnte aber f{\"u}r alle Zust{\"a}nde mittels eines polarisierbaren Kontinuum-Modells ausgeschlossen werden. Die geringe LD im α-PTCDA ist folglich ein Indiz f{\"u}r ein Self-Trapping, das durch die Kristallstruktur aus π-Stapeln evoziert wird, welche in DIP fischgr{\"a}tenartig ist. Da Polarisationseffekte auszuschließen sind, {\"u}bt der Kristall lediglich durch sterische Restriktionen einen Einfluss auf das Dimer aus. Daher muss die Methode f{\"u}r die Beschreibung von Self-Trapping nur diese Effekte ber{\"u}cksichtigen, so dass sich f{\"u}r den Einsatz des mechanical embedding QM/MM-Ansatzes entschieden wurde. Nun konnten Potentialfl{\"a}chen berechnet werden, auf denen anschließend eine Wellenpaketdynamik durchgef{\"u}hrt wurde. Diese Methode erlaubt es erstmals, Mechanismen der Exzitonen-Immobilisierung in organischen Materialien auf einer atomistischen Ebene zu beschreiben. Als Erkl{\"a}rung f{\"u}r Self-Trapping in α-PTCDA dienten Potentialfl{\"a}chen, die eine intermolekulare Verschiebung des Dimers im Kristall abbilden. So wurde eine Exzitonen-Immobilisierung innerhalb von 500 fs gefunden, die aus einem irreversiblem Energieverlust und einer lokalen Verzerrung der Kristallstruktur resultiert und auf diese Weise den weiteren Transport des Exzitons verhindert. Im Fall von DIP kann diese Immobilisierung aufgrund hoher Energiebarrieren nicht stattfinden. Diese Barrieren resultieren aus der fischgr{\"a}tenartigen Kristallstruktur des DIP. Diese Diskrepanzen in der Dynamik erkl{\"a}ren die unterschiedlichen LD-Werte f{\"u}r DIP und α-PTCDA. In einem weiteren Fall wurde eine Exzitonen-Immobilisierung in helikalen π Aggregaten von Perylen-tetracarboxyl-bisimid (PBI) Molek{\"u}len festgestellt. Hier wird Self-Trapping durch einen Relaxationsmechanismus verursacht, in dem das Exziton durch geringe asymmetrische Schwingungen des Aggregats innerhalb von 200 fs von dem hellen Frenkel- in den dunklen Frenkel-Zustand transferiert wird, wobei dieser {\"U}bergang von einem CT-Zustand vermittelt wird. Der gesamte Vorgang ist nur bei helikalen Aggregaten m{\"o}glich, weil nur hier CT-Zust{\"a}nde sehr dicht bei dem hellen Frenkel-Zustand vorhanden sind. Im finalen Frenkel-Zustand tritt eine Torsionsbewegung um die π-Stapelachse ein, so dass ein Energieverlust und eine lokale {\"A}nderung der Aggregatstruktur erfolgt - also ein Self-Trapping des Exzitons. Dieser modellierte Mechanismus steht im Einklang zu allen vorliegenden experimentellen Daten. Diese Erkenntnisse lassen die Schlussfolgerung zu, dass in k{\"u}nftigen Materialen f{\"u}r organische Solarzellen eine irreversible und ultraschnelle Deformation des Aggregats nach der Photoanregung vermieden werden muss - will man lange LD erreichen. Nur so kann Self-Trapping von Exzitonen verhindert werden.}, subject = {Exziton}, language = {en} } @phdthesis{SeligParthey2012, author = {Selig-Parthey, Ulrike}, title = {Methods of Nonlinear Femtosecond Spectroscopy in the Visible and Ultraviolet Regime and their Application to Coupled Multichromophore Systems}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-74356}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {Time-resolved spectroscopic studies of energy transfer between molecules in solution form a basis for both, our understanding of fundamental natural processes like photosynthesis as well as directed synthetic approaches to optimize organic opto-electronic devices. Here, coherent two-dimensional (2D) spectroscopy opens up new possibilities, as it reveals the correlation between absorption and emission frequency and hence the full cause-and-effect chain. In this thesis two optical setups were developed and implemented, permitting the recording of electronic 2D spectra in the visible and in the hitherto unexplored ultraviolet spectral range. Both designs rely on the exclusive manipulation of beam pairs, which reduces the signal modulation to the difference between the transition frequency of the system and the laser frequency. Thus - as has been shown experimentally and theoretically - the timing precision as well as mechanical stability requirements are greatly reduced, from fractions of the oscillation period of the exciting light wave to fractions of the pulse duration. Two-dimensional spectroscopy and femtosecond transient absorption (TA) as well as different theoretical approaches and simulation models were then applied to coupled multichromophore systems of increasing complexity. Perylene bisimide-perylene monoimide dyads were investigated in cooperation with Prof. Dr. Frank W{\"u}rthner and Prof. Dr. Bernd Engels at the University of W{\"u}rzburg. In these simplest systems studied, global analysis of six different TA experiments unequivocally revealed an ultrafast interchromophoric energy transfer in the 100 fs range. Comparison between the obtained transfer rates and the predictions of F{\"o}rster theory suggest a breakdown of this point-transition-dipole-based picture at the donor-acceptor distances realized in our compounds. Furthermore, a model including conformational changes and an interchromophoric charge transfer has been derived to consistently describe the observed pico- to nanosecond dynamics and fluorescence quantum yields. A second collaboration with Prof. Dr. Gregory Scholes (University of Toronto, Canada) and Prof. Dr. Paul Burn (University of Queensland, Australia) addressed the photophysics of a series of uorene-carbazole dendrimers. Here, a combination of 2D-UV spectroscopy and femtosecond ansiotropy decay experiments revealed the initial delocalization of the excited state wave function that saturates with the second generation. In room temperature solution, disorder-induced localization takes place on the time scales comparable to our instrument response, i.e. 100 fs, followed by energy transfer via incoherent hopping processes. Lastly, in tubular zinc chlorin aggregates, semi-synthetic analogues of natural lightharvesting antennae that had again been synthesized in the group of Prof. Dr. Frank W{\"u}rthner, the interchromophoric coupling is so strong that coherently coupled domains prevail even at room temperature. From an analysis of intensity-dependent TA measurements the dimensions of these domains, the exciton delocalization length, could be determined to span 5-20 monomers. In addition, 2D spectra uncovered efficient energy transfer between neighboring domains, i.e. ultrafast exciton diffusion.}, subject = {Femtosekundenspektroskopie}, language = {en} } @phdthesis{Seipel2002, author = {Seipel, Michael}, title = {Chemische Wellen und Fronten in nichtlinearen Reaktions-Diffusions-Systemen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-3392}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2002}, abstract = {Die vorliegende Dissertation besch{\"a}ftigt sich mit nichtlinearen Reaktions-Transport-Systemen, die in zweidimensionalen Medien chemische Wellen und propagierende Fronten ausbilden k{\"o}nnen. Grundlage dieser Art von r{\"a}umlichen Mustern sind sogenannte erregbare Systeme. Ein Themengebiet der Arbeit umfasst die Untersuchung von Spiralwellen in der Belousov-Zhabotinsky-Reaktion (BZ-Reaktion). Ein weiterer Teilabschnitt behandelt die Wechselwirkung zwischen Polymersystemen und nichtlinearen chemischen Reaktionen. In den untersuchten, r{\"a}umlich ausgedehnten Systemen spielt die Kopplung nichtlinearer chemischer Reaktionen an Transportprozesse eine wichtige Rolle. Die generischen Typen von chemischen Mustern sind Pulswellen in einer Raumdimension, kreisf{\"o}rmige Wellen und Spiralen in einem zweidimensionalen System und kugelschalen- bzw. schraubenf{\"o}rmige Wellen in drei Raumdimensionen. Auf theoretischer Basis werden Effekte von Spiralwellen bei {\"A}nderung der Erregbarkeit des Reaktionsmediums dargestellt.In der vorliegenden Arbeit ist es erstmals gelungen, eine Methode zu entwickeln, die es erlaubt die Erregbarkeit in der BZ-Reaktion sowie in einer Vielzahl weiterer nichtlinearer Reaktionen zu beeinflussen. Ein weiteres Themengebiet dieser Dissertation ist die Untersuchung von pH-Systeme in Hydrogelen. Dies sind hydrophile Gele, die ihr Volumen in w{\"a}ssrigen L{\"o}sungen ver{\"a}ndern k{\"o}nnen. In der vorliegenden Arbeit wurden Gele auf der Basis von Acrylamid und Methacrylat als Copolymer verwendet und an die oben beschriebenen pH-Oszillatoren angekoppelt. Durch Polymerisation von Acrylamid zusammen mit Natriummethacrylat konnte ein mit einem pH-Oszillator beladenes Gel hergestellt werden, das nach Start der Reaktion durch eine kleine Menge S{\"a}ure mit einer deutlichen Volumenkontraktion reagiert. Diese Kontraktion des Gels konnte ausgenutzt werden, um die chemische Energie eines pH-Reaktionssystems in eine mechanische Kraftwirkung umzuwandeln.}, subject = {Hydrogel}, language = {de} } @phdthesis{Seibt2009, author = {Seibt, Joachim}, title = {Theoretical investigations on the spectroscopy of molecular aggregates}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37218}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2009}, abstract = {Die spektroskopischen Eigenschaften von Molek{\"u}laggregaten wurden mittels quantendynamischer Berechnungen untersucht. Hierbei wurden sowohl lineare als auch nichtlineare Spektroskopietechniken einbezogen. Zur Simulation von Absorptions- und CD-Spektroskopie wurden Kopplungseffekte sowie die relative Orientierung der Monomer-Einheiten in den Modellen ber{\"u}cksichtigt, um gemessene Spektren reproduzieren und so die entsprechenden Parameter zu bestimmen. Zur genaueren Beschreibung wurden auch Ergebnisse quantenchemischer Rechnungen verwendet. Dar{\"u}ber hinaus wurden Untersuchungen zur nichtlinearen optischen Spektroskopie an Dimeren durchgef{\"u}hrt.}, subject = {Theoretische Chemie}, language = {en} } @phdthesis{Schuessler2006, author = {Sch{\"u}ßler, Thomas}, title = {Photodissoziation und dissoziative Photoionisation von Kohlenwasserstoff-Radikalen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-18563}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2006}, abstract = {In dieser Arbeit wurde das Dissoziationsverhalten kleiner organischer Kohlenwasserstoffradikale untersucht. Zum einen wurde die dissoziative Photoionisation des Allyl-, Propargyl- und Ethylradikals durch die Verbindung einer herk{\"o}mmlichen, gepulsten Pyrolysequelle mit Synchrotronstrahlung untersucht. Zum anderen wurden von verschiedenen Propyl- und Butyl-Radikalisomeren die Raten des Wasserstoffverlustes bei Anregung mit 239 nm gemessen. Es konnte gezeigt werden, dass die Kombination einer gepulsten Radikalquelle mit Synchrotronstrahlung technisch umsetzbar ist. Der Vorteil dieser Methode liegt darin, dass es m{\"o}glich ist, die Radikale {\"u}ber einen kontinuierlichen Energiebereich von mehreren eV innerhalb kurzer Zeit zu betrachten, was mit einem normalen Labor-Aufbau mit Farbstofflasern nicht m{\"o}glich ist. So konnten anhand von Photoelektronenspektren und Photoionisationseffizienzkurven die Ionisierungsenergie des Allyl-, des Propargyl- und des Ethyl-Radikals in guter {\"U}bereinstimmung zu {\"a}lteren Literaturdaten best{\"a}tigt werden. Anhand von Messungen zur dissoziativen Photoionisation konnte gezeigt werden, dass das Allyl und das Ethyl wie angenommen ein Wasserstoff-Molek{\"u}l abspalten. Beim Allyl gibt es hierbei zwei m{\"o}gliche Dissoziationsprodukte: das Cyclopropyl- und das Propargyl-Kation. Einfache RRKM-Rechnungen deuten darauf hin, dass bei geringen {\"U}berschussenergien das Cyclopropenyl-, bei gr{\"o}ßeren hingegen bevorzugt das Propargyl-Kation gebildet wird. Das Ethyl-System besitzt einen nicht-klassischen, {\"u}berbr{\"u}ckten ionischen Zustand. Die dissoziative Photoionisation f{\"u}hrt zum Vinyl-Kation und setzt bei deutlich h{\"o}heren Energien ein, als von der Theorie vorhergesagt. Alle Erkl{\"a}rungsversuche sind unbefriedigend, daher sollten hier weitere experimentelle und theoretische Untersuchungen angeschlossen werden. Die dissoziative Photoionisation des Propargyl-Radikals besitzt, theoretischen Berechnungen zufolge, zwei konkurrierende Zerfallskan{\"a}le. Wie die Experimente jedoch zeigten, erfolgt nur die Abspaltung von H unter Bildung des Cyclopropenyliden-Kations im vorhergesagten Energiebereich. Der Konkurrenzprozess, Bildung von Propinyliden und H\$_2\$, setzt erst bei deutlich h{\"o}heren Photonenenergien ein. Daneben konnte erstmals der Dreik{\"o}rperzerfall des Propargylbromids und des Ethyliodids zum Propinyliden- respektive Vinyl-Kation beobachtet und die Auftrittsenergien bestimmt werden. Diese stimmen gut mit den thermochemischen Vorhersagen {\"u}berein. In Zukunft ist geplant, mit ZEKE-Spektroskopie die Ionisierungsenergien der untersuchten Radikale exakt zu bestimmen. Insbesondere beim Ethyl-Radikal mit seinem nicht-klassischen Verhalten muss noch viel gekl{\"a}rt werden. Des Weiteren ist geplant, weitere Experimente am Synchrotron durchzuf{\"u}hren. Denkbar w{\"a}re hier, Ionen in definierten, schwingungsangeregten Zust{\"a}nden zu erzeugen und an ihnen Ionen-Molek{\"u}l-Reaktionen durchzuf{\"u}hren. Ausgehend von den jeweiligen Azoalkanen wurden die Wasserstoff-Disso"-zia"-tions"-raten der \n-Propyl-, \n-Butyl- und \sec-Butyl-Radikale bei einer Anregungswellenl{\"a}nge von 239 nm gemessen. {\"A}hnlich wie dies bereits bei fr{\"u}heren Messungen am \tert-Butyl- und Ethyl-Radikal der Fall war, waren diese Raten um 2--3 Gr{\"o}ßenordnungen schneller als von einfachen RRKM-Rechnungen vorhergesagt. \%Eine m{\"o}gliche Erkl{\"a}rung w{\"a}re ein konkurrierender \%Deaktivierungskanal, z.B.\ der C--C-Bindungsbruch im Radikal. Da \%jedoch der Wasserstoffverlust von einem der Spaltprodukte nicht in \%einem Einphotonenprozess zu bewerkstelligen ist, muss dieser Kanal \%ausgeschlossen werden. Ein anderer, noch sehr spekulativer \%Erkl{\"a}rungsversuch geht von einem langlebigen 3p-Zustand, der ein \%Minimum in der Geometrie mit einer verl{\"a}ngerten C--C-Bindung \%darstellt, aus. Koppelt dieser Zustand mit dem darunterliegenden \%3s-Zustand, kann es zur Deaktivierung kommen, jedoch nur, wenn die \%{\"U}berschussenergie ausreichend groß ist. Dies w{\"u}rde das Verhalten der \%Dissoziationsrate bei den Propyl- und Butyl-Radikalisomeren sowie dem \%Ethylradikal erkl{\"a}ren. Es wurde eine sehr spekulative Erkl{\"a}rung vorgestellt, die dieses Verhalten erkl{\"a}ren k{\"o}nnte. Die vorliegenden Daten k{\"o}nnen diese Theorie aber weder best{\"a}tigen noch widerlegen. Es sieht jedoch so aus, als ob diese Diskrepanz zwischen Theorie und Experiment ein allgemeines Ph{\"a}nomen in Alkylradikalen darstellt. Um diese Theorie weiter zu erh{\"a}rten, kann man einerseits noch weitere Alkylradikale untersuchen, ob sie {\"a}hnliche Differenzen zwischen Experiment und Theorie zeigen. Andererseits sollten auch bei den Propyl- und Butylradikalen Experimente mit unterschiedlichen Anregungswellenl{\"a}ngen durchgef{\"u}hrt werden um zu kl{\"a}ren, ob sie sich analog zum \tert-Butyl- und Ethylradikal verhalten.}, subject = {Photodissoziation}, language = {de} } @article{SchuergerEngel2023, author = {Sch{\"u}rger, Peter and Engel, Volker}, title = {Differential Shannon entropies characterizing electron-nuclear dynamics and correlation: momentum-space versus coordinate-space wave packet motion}, series = {Entropy}, volume = {25}, journal = {Entropy}, number = {7}, issn = {1099-4300}, doi = {10.3390/e25070970}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-362670}, year = {2023}, abstract = {We calculate differential Shannon entropies derived from time-dependent coordinate-space and momentum-space probability densities. This is performed for a prototype system of a coupled electron-nuclear motion. Two situations are considered, where one is a Born-Oppenheimer adiabatic dynamics, and the other is a diabatic motion involving strong non-adiabatic transitions. The information about coordinate- and momentum-space dynamics derived from the total and single-particle entropies is discussed and interpreted with the help of analytical models. From the entropies, we derive mutual information, which is a measure for the electron-nuclear correlation. In the adiabatic case, it is found that such correlations are manifested differently in coordinate- and momentum space. For the diabatic dynamics, we show that it is possible to decompose the entropies into state-specific contributions.}, language = {en} } @phdthesis{Schuerger2024, author = {Sch{\"u}rger, Peter}, title = {Information-Theoretical Studies on Time-Dependent Quantum Systems}, doi = {10.25972/OPUS-35221}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-352215}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2024}, abstract = {In this thesis, we apply the information-theoretic approach in the context of quantum dynamics and wave packet motion: Information-theoretic measures are calculated from position and momentum densities, which are obtained from time-dependent quantum wave functions. The aim of this thesis is to benchmark, analyze and interpret these quantities and relate their features to the wave packet dynamics. Firstly, this is done for the harmonic oscillator (HO) with and without static disorder. In the unperturbed HO, the analytical study of coherent and squeezed states reveals time-dependent entropy expressions related to the localization of the wave function. In the disordered HO, entropies from classical and quantum dynamics are compared for short and long times. In the quantum case, imprints of wave packet revivals are found in the entropy. Then, the energy dependence of the entropy for very long times is discussed. Secondly, this is donefor correlated electron-nuclear motion. Here, entropies derived from the total, electronic and nuclear density, respectively, are calculated in position and momentum space for weak and strong adiabatic electronic coupling. The correlation between electron and nucleus is investigated using different correlation measures, where some of these functions are sensitive to the nodal structure of the wave function. An analytic ansatz to interpret the information-theoretical quantities is applied as well.}, subject = {St{\"o}rungstheorie}, language = {en} } @phdthesis{Schoeppler2012, author = {Sch{\"o}ppler, Friedrich Eugen}, title = {Photolumineszenzmikroskopie und-spektroskopie halbleitender Kohlenstoffnanor{\"o}hren}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-73329}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {Im Rahmen dieser Dissertation wurden optische Eigenschaften von halbleitenden, einwandigen Kohlenstoffnanor{\"o}hren (SWNTs) der (6,5)-Chiralit{\"a}t untersucht. Dies gelang durch Ensemblemessungen aber vor allem durch den Aufbau eines Mikroskops zur Messung an einzelnen SWNTs. Dieses Einzel- SWNT-Mikroskop erm{\"o}glichte nebst „normaler" Bildgebung durch Sammlung und Abbildung der nahinfraroten Photolumineszenz (PL) der (6,5)-SWNTs auch die spektral- und zeitaufgel{\"o}ste Untersuchung der PL. Durch Verwendung von Dichtegradientenultrazentrifugation (DGU) zur chiralen Aufreinigung des SWNT-Rohmaterials konnten alle Messungen unter Minimierung des st{\"o}renden Einflusses von Aggregaten oder SWNTs anderer Chiralit{\"a}t durchgef{\"u}hrt werden. Untersucht und bestimmt wurde der Absorptionsquerschnitt und die Exzitonengr{\"o}ße, die PL-Eigenschaften aggregierter SWNTs und der Einfluß der Permittivit{\"a}t auf die PL einzelner SWNTs.}, subject = {Mikroskopie}, language = {de} } @phdthesis{Schon2011, author = {Schon, Christof}, title = {Spektroskopie an substituierten [2.2]Paracyclophanen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-65374}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {In dieser Arbeit wurde der elektronische Grundzustand und der erste angeregte Zustand sowie der Zustand des Ions von substituierten [2.2]Paracyclophanen untersucht. Um die Wechselwirkungen zwischen konjugierten pi-Systemen besser zu verstehen wurden die Molek{\"u}le mit Hilfe von Resonance Enhanced Multiphoton Ionization Spektroskopie (REMPI), VUV-Synchrotronstrahlung und quantenchemischen Rechnungen untersucht. Die Experimente wurden im Molekularstrahl durchgef{\"u}hrt. In den [1+1]-REMPI-Spektren von pseudo-para-Dibrom[2.2]paracyclophan, pseudo-para-Dicyano[2.2]paracyclophan, pseudo-ortho-Dicyano[2.2]paracyclophan, pseudo-para-Diphenyl[2.2]paracyclophan und pseudo-para-Di(trimethylsilyl)[2.2]paracyclophan wird ein kontinuierlicher Signalanstieg beobachtet. Individuelle Schwingungsbanden konnte nicht aufgel{\"o}st werden. Dies ist ein Hinweis darauf, dass die Schwingungszust{\"a}nde im S1-Zustand sehr eng beieinanderliegen. Der Schwerpunkt dieser Arbeit lag auf der Untersuchung der hydroxysubstituierten [2.2]Paracyclophane pseudo-ortho-Dihydroxy[2.2]paracyclophan (o-DHPC), pseudo-para-Dihydroxy[2.2]paracyclophan (p-DHPC) und racemisches-4-Hydroxy[2.2]paracyclophan (MHPC). Die adiabatischen Ionisierungsenergien der Molek{\"u}le wurden aus der Ionenstromkurve mit Hilfe eines Wannier-Fits bestimmt: 7.56eV (o-DHPC), 7.58eV (p-DHPC) und 7.63eV (MHPC). In den Schwellenphotoelektronenspektren (TPES) werden Signalmodulationen im Photonenenergiebereich von 7.8-11eV beobachtet. Hierbei handelt es sich um angeregte Zust{\"a}nde des Kations. Bei ca. 10.5eV wird in den Spektren von allen drei hydroxysubstituierten Molek{\"u}len dissoziative Photoionisation (DPI) beobachtet. Hierbei werden die Bindungen zwischen den aliphatischen Kohlenstoff-Atomen gebrochen. Im [1+1]-REMPI-Spektrum des o-DHPCs wird der S1<-S0-{\"U}bergang bei 31483cm^-1 (3.903eV) beobachtet. Die berechnete adiabatische Anregungsenergie liegt bei 3.87eV (SCS-CC2). Der elektronische Ursprung des o-DHPCs ist +722cm^-1 blauverschoben im Vergleich zum unsubstituierten [2.2]Paracyclophan (PC). Im REMPI-Spektrum werden viele Schwingungsbanden beobachtet. Cluster des o-DHPCs mit Wasser werden ebenfalls beobachtet. Die elektronischen Urspr{\"u}nge der Cluster mit Wasser sind rotverschoben im Vergleich mit dem Monomer. Im o-DHPC(H2O)-Cluster ist das Wassermolek{\"u}l zwischen den beiden OH-Gruppen des Cyclophans {\"u}ber Wasserstoffbr{\"u}ckenbindungen fixiert. In den REMPI-Spektren des o-DHPCs und o-DHPC(H2O)-Clusters wird die Atmungsmode mit hoher Intensit{\"a}t beobachtet. Außerdem tritt eine Twist- und Tilt-Mode in den Spektren auf. Viele Kombinationsbanden der Atmungs, Twist- und Tilt-Mode werden in den Spektren beobachtet. Im [1+1]-REMPI-Spektrum des p-DHPCs werden nur kleine Signalmodulationen mit niedrigen Intensit{\"a}ten im roten Spektralbereich im Vergleich mit dem Ursprung des o-DHPCs beobachtet. Bei der Anregung des p-DHPCs kommt es zu einer großen {\"A}nderung der Struktur. Dies f{\"u}hrt dazu, dass die Franck-Condon-Faktoren f{\"u}r den S1<-S0-{\"U}bergang des p-DHPCs deutlich kleiner sind im Vergleich mit dem o-DHPC (1:10^7). Daher treten die Signale des p-DHPCs im REMPI-Spektrum nur mit geringer Intensit{\"a}t auf. Der Ursprung des S1<-S0 {\"U}bergangs des MHPCs wird im [1+1]-REMPI-Spektrum bei 30772cm^-1 (3.815eV) beobachtet. Die berechnete Anregungsenergie liegt bei 3.79eV (SCS-CC2). Im Vergleich zum unsubstituierten PC wird keine wesentliche Energieverschiebung des S1<-S0-{\"U}bergangs beobachtet. Im REMPI-Spektrum des MHPCs wird die Twist-Mode beobachtet. Die Banden zeigen eine inverse Anharmonizit{\"a}t. Die ab-initio-Rechnungen beschreiben die Potentialkurve des S1-Zustands mit einem Doppelminimum. Die H{\"o}he der Barriere zwischen den beiden Minima h{\"a}ngt vom Basissatz ab. Empirisch wurde entlang der Twist-Mode ein flaches Potential bestimmt. Die aus diesem Potenzial resultierenden Banden und Intensit{\"a}ten der Twist-Mode stimmen mit den experimentellen Beobachtungen sehr gut {\"u}berein. Die [1+1]-REMPI-Spektren des MHPCs mit einem und zwei Wassermolek{\"u}len zeigen einen kontinuierlichen Signalanstieg. Einzelne Schwingungsbanden konnten unter den experimentellen Bedingungen nicht aufgel{\"o}st werden. Der Ursprung des MHPC-Clusters mit einem Wassermolek{\"u}l beginnt bei ca. -180cm^-1 und mit zwei Wassermolek{\"u}len bei ca. -290cm^-1 im Vergleich mit dem Ursprung des Monomers.}, subject = {Paracyclophane}, language = {de} } @phdthesis{Schneider2009, author = {Schneider, Michael}, title = {Elektronische Spektroskopie und Photodissoziationsverhalten von heterocyclischen Biomolek{\"u}len}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-42190}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2009}, abstract = {Das Photodissoziationsverhalten der Pyrimidinbasen Thymin, Uracil und 5-Methylcytosin wurde mittels Photofragment-Dopplerspektroskopie und Photofragment-Imaging untersucht. Die Photodissoziation erfolgt in allen F{\"a}llen in einem statistischen Prozess nach Mehrphotonenabsorption. Von Purin wurde ebenfalls die Photodissoziation untersucht sowie das elektronische Spektrum des niedrigsten n-pi*-Zustands mittels Photofragment-Anregungsspektroskopie und [1+1']-REMPI-Spektroskopie gemessen. Purin zeigt bei den untersuchten Wellenl{\"a}ngen dasselbe Verhalten wie die Pyrimidinbasen. Das Elektronische Spektrum von Purin zeigt {\"u}ber einen Bereich von {\"u}ber 2000 cm^-1 vom Bandenursprung gut strukturierte Banden, von denen die meisten oberhalb 850 cm^-1 als Kombinationsbanden identifiziert wurden.}, subject = {Photodissoziation}, language = {de} } @phdthesis{Schmidt2015, author = {Schmidt, Thomas Christian}, title = {Theoretical Investigations on the Interactions of Small Compounds with their Molecular Environments}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-127860}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Im ersten Teil dieser Arbeit wird eine Kombination theoretischer Methoden f{\"u}r die strukturbasierte Entwicklung neuer Wirkstoffe pr{\"a}sentiert. Ausgehend von der Kristallstruktur eines kovalenten Komplexes einer Modellverbindung mit dem Zielprotein wurde mit Hilfe von quantenmechanischen und QM/MM Rechnungen die genaue Geometrie des vorausgehenden nicht-kovalenten Komplexes betimmt. Letztere ist der bestimmende Faktor f{\"u}r die Reaktivit{\"a}t des Inhibitors gegen{\"u}ber der katalytisch aktiven Aminos{\"a}ure und damit f{\"u}r die Ausbildung einer kovalenten Bindung. Aus diesem Grund wurde diese Geometrie auch f{\"u}r die Optimierung der Substitutionsmusters des Ihnibitors verwendet, um dessen Affinit{\"a}t zum Zielenzyme zu verbessern ohne dass dieser seine F{\"a}higkeit kovalent an das aktive Zentrum zu binden verliert. Die Optimierung des Substitutionsmuster wurde doch Methode des Molekularen Dockings unterst{\"u}tzt, das diese optimal dazu geeignet sind, Bindungsaffinit{\"a}ten vorherzusagen, die durch eine Modifikation der chemischen Struktur entstehen. Eine Auswahl der besten Strukturen wurde anschließend verwendet, um zu {\"u}berpr{\"u}fen, ob die ver{\"a}nderten Molek{\"u}le noch gen{\"u}gen Reaktivit{\"a}t gegen{\"u}ber dem Zielprotein aufweisen. Molek{\"u}ldynamik Simulationen der neuen Verbindungen haben jedoch gezeigt, dass die ver{\"a}nderten Verbindungen nur so and das Protein binden, dass die Bilung eine kovalenten Bindung zum Enzym nicht mehr m{\"o}glich ist. Daher wurden in einem weiteren Schritt die Modellverbindungen weiter modifiziert. Neben {\"A}nderungen im Substitutionsmuster wurde auch die chemische Struktur im Kern ver{\"a}ndert. Die Bindungsaffinit{\"a}ten wurde wieder mittels Docking {\"u}berpr{\"u}ft. F{\"u}r die besten Bindungsposen wurden wieder Simulationen zur Molek{\"u}ldynamik durchgef{\"u}hrt, wobei diesmal die Ausbildung einer kovalenten Bindung zum Enzyme m{\"o}glich erscheint. In einer abschließenden Serie von QM/MM Rechnungen unter Ber{\"u}cksichtigung verschiedener Protonierungszust{\"a}nde des Inhibitors und des Proteins konnten Reaktionspfade und zugeh{\"o}rige Reaktionsenergien bestimmt werden. Die Ergebnisse lassen darauf schließen, dass eines der neu entwickelten Molek{\"u}le sowohl eine stark verbesserte Bindungsaffinit{\"a}t wie auch die M{\"o}glichkeit der kovalenten Bindung an Enzyme aufweist. Der zweite Teil der Arbeit konzentriert sich auf die Umgebungseinfl{\"u}sse auf die Elektronenverteilung eines Inhibitormodells. Als Grundlage dient ein vinylsulfon-basiertes Moek{\"u}l, f{\"u}r das eine experimentell bestimmte Kristallstruktur sowie ein theoretisch berechneter Protein Komplex verf{\"u}gbar sind. Ein Referendatensatz f{\"u}r diese Systeme wurde erstellt, indem der Konformationsraum des Inhibitors nach m{\"o}glichen Minimumsstrukturen abgesucht wurde, welche sp{\"a}ter mit den Geometrien des Molek{\"u}ls im Kristall und im Protein verglichen werden konnten. The Geometrie in der Kristallumgebung konnte direkt aus den experimentellen Daten {\"u}bernommen werden. Rechnungen zum nicht-kovalenten Protein Komplex hingegen haben gezeigt, dass f{\"u}r das Modellsystem mehrere Geometrien des Inhibiors sowie zwei Protonierungszust{\"a}nde f{\"u}r die katalytisch aktiven Aminos{\"a}uren m{\"o}glich sind. F{\"u}r die Analyse wurden daher alle m{\"o}glichen Proteinkomplexe mit der Kristallstruktur verglichen. Ebenso wurden Vergleiche mit der Geometrie des isolierten Molek{\"u}ls im Vakuum sowie der Geometrie in w{\"a}ssriger L{\"o}sung angestellt. F{\"u}r die Geometrie des Molek{\"u}ls an sich ergab sich eine gute {\"U}bereinstimmung f{\"u}r alle Modellsysteme, f{\"u}r die Wechselwirkungen mit der Umgebung jedoch nicht. Die Ausbildung von Dimeren in der Kristallumgebung hat einen stark stablisierenden Effekt und ist einer der Gr{\"u}nde, warum dieser Kristall so gut wie keine Fehlordungen aufweist. In den Proteinkomplexen hingegen ergibt sich eine Abstoßung zwischen dem Inhibitor und einer der katalytisch aktiven Aminos{\"a}uren. Als Ursache f{\"u}r diese Abstoßung konnte die Einf{\"u}hrung der Methylaminfunktion ausgemacht werden. Vermutlicherweise f{\"u}hrt diese strukturelle {\"A}nderung auch dazu, dass der Modellinhibitor nicht in der Lage ist, so wie die Leitstruktur K11777 an das aktive Zentrum des Enzyms zu binden.}, subject = {Theoretische Chemie}, language = {en} } @article{SchmidtFantuzziKlopfetal.2021, author = {Schmidt, Paul and Fantuzzi, Felipe and Klopf, Jonas and Schr{\"o}der, Niklas B. and Dewhurst, Rian D. and Braunschweig, Holger and Engel, Volker and Engels, Bernd}, title = {Twisting versus delocalization in CAAC- and NHC-stabilized boron-based biradicals: the roles of sterics and electronics}, series = {Chemistry - A European Journal}, volume = {27}, journal = {Chemistry - A European Journal}, number = {16}, doi = {10.1002/chem.202004619}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-256636}, pages = {5160-5170}, year = {2021}, abstract = {Twisted boron-based biradicals featuring unsaturated C\(_2\)R\(_2\) (R=Et, Me) bridges and stabilization by cyclic (alkyl)(amino)carbenes (CAACs) were recently prepared. These species show remarkable geometrical and electronic differences with respect to their unbridged counterparts. Herein, a thorough computational investigation on the origin of their distinct electrostructural properties is performed. It is shown that steric effects are mostly responsible for the preference for twisted over planar structures. The ground-state multiplicity of the twisted structure is modulated by the σ framework of the bridge, and different R groups lead to distinct multiplicities. In line with the experimental data, a planar structure driven by delocalization effects is observed as global minimum for R=H. The synthetic elusiveness of C\(_2\)R\(_2\)-bridged systems featuring N-heterocyclic carbenes (NHCs) was also investigated. These results could contribute to the engineering of novel main group biradicals.}, language = {en} } @phdthesis{Schmid2022, author = {Schmid, Paul}, title = {Quantenchemische Untersuchungen von Umgebungseinfl{\"u}ssen bei offen- und geschlossenschaligen Systemen}, doi = {10.25972/OPUS-26510}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-265106}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {In dieser Dissertation werden die Umgebungseinfl{\"u}sse auf die strukturellen und elektronischen Eigenschaften von verschiedenen offen- und geschlossenschaligen Systemen mittels quantenchemischer Methoden berechnet. Ein Kernpunkt umfasst die Untersuchung von verdreht angeordneten, biradikalischen Diborylalkenen, welche eine unges{\"a}ttigte C2R2-Br{\"u}cke (R = Et, Me) besitzen und durch cyclische (Alkyl)(amino)carbene (CAACs) stabilisiert werden. Quantenchemische Berechnungen zeigen, dass haupts{\"a}chlich sterische Effekte f{\"u}r die Ausbildung einer verdrehten Molek{\"u}lanordnung verantwortlich sind, w{\"a}hrend bei geringen sterischen Wechselwirkungen (R = H) die Delokalisationseffekte {\"u}berwiegen, wodurch eine planare Struktur beg{\"u}nstigt wird. Die Bevorzugung einer offenschaligen Singulettkonfiguration anstelle eines Tripletts ist auf den großen Energieunterschied der beiden einfach besetzten Molek{\"u}lorbitale zur{\"u}ckzuf{\"u}hren. Durch die Berechnung der L{\"o}sungsmitteleffekte mithilfe von polarisierbaren Kontinuumsmodellen kann gefolgert werden, dass mit zunehmender statischer Dielektrizit{\"a}tskonstante eine planare und geschlossenschalige Struktur st{\"a}rker stabilisiert wird als eine verdrehte Anordnung. Ein weiteres Thema dieser Dissertation befasst sich mit der quantenchemischen Analyse eines makrozyklischen Perylenbisimid-Trimersystems, welches eingebettet in einer Polymethylmethacrylat-Matrix bei Temperaturen nahe dem absoluten Nullpunkt eine Lokalisierung der ersten drei angeregten Zust{\"a}nde zeigt. Quantenchemische Vakuumberechnungen ergeben, dass unabh{\"a}ngig von der gegenseitigen geometrischen Orientierung der drei Perylenbisimid-Chromophore der {\"U}bergang vom Grundzustand in den S1-Zustand verboten ist und dass die ersten drei angeregten Zust{\"a}nde delokalisiert vorliegen. Mithilfe von expliziten L{\"o}sungsmittelmodellen kann jedoch gezeigt werden, dass das Auftreten dieser Lokalisierungen auf eine inhomogene Polymethylmethacrylat-Umgebung zur{\"u}ckzuf{\"u}hren ist, die zu einem Symmetriebruch und somit zu einer Zunahme der Oszillatorst{\"a}rke f{\"u}r S1 und der Lokalisierungsgrade f{\"u}r S1, S2 und S3 f{\"u}hrt. Dar{\"u}ber hinaus wird der L{\"o}sungsmitteleinfluss auf die angeregten Zust{\"a}nde des Azulens mittels impliziter und expliziter L{\"o}sungsmittelmodelle berechnet. Bei einer Erh{\"o}hung der dynamischen Dielektrizit{\"a}tskonstante im impliziten Modell nehmen die Anregungsenergien der vertikalen Singulettzust{\"a}nde ab, wobei der Effekt mit steigender Oszillatorst{\"a}rke zunimmt. Die Auswirkung der statischen Dielektrizit{\"a}tskonstante auf die Anregungsenergien ist dagegen deutlich schw{\"a}cher ausgepr{\"a}gt. Im expliziten Modell bewirkt das L{\"o}sungsmittel ebenfalls eine Abnahme der Anregungsenergie des hellen Singulettzustands, wenn auch in geringerem Umfang als im impliziten Modell. Als letztes Thema wird der Inhibitionsmechanismus der Cysteinprotease Rhodesain durch zwei modifizierte 1,4-Naphthoquinone untersucht. W{\"a}hrend beide Naphthoquinone an der 2-Position eine Dipeptideinheit aufweisen, besitzen sie an der 3-Position entweder einen Nitril- oder Chloridsubstituenten. Zwar erfolgt bei beiden Derivaten die Inhibition {\"u}ber einen kovalent-reversiblen Mechanismus, jedoch verl{\"a}uft die Hemmung im Falle des Nitrilderivats erheblich effektiver. Die quantenchemischen Berechnungen eines vereinfachten Modells zeigen, dass die Cysteineinheit (HS-R) bevorzugt in einer exothermen und reversiblen Additionsreaktion an die elektronenarme C-C-Doppelbindung der Naphthoquinone anlagert. Dabei werden kleinere Reaktionsenergien f{\"u}r die Reaktion des Chlorderivats als f{\"u}r die Reaktion des Nitrilderivats erhalten. Durch die Ber{\"u}cksichtigung von Wasser in einem impliziten L{\"o}sungsmittelmodell kommt es bei fast allen Reaktionsprodukten zu einer Energiezunahme, die bei der Reaktion des Nitrilderivats st{\"a}rker ausf{\"a}llt als bei der Reaktion des Chlorderivats.}, subject = {Umgebungseinfluss}, language = {de} } @phdthesis{Schluecker2001, author = {Schl{\"u}cker, Sebastian}, title = {Lineare und nichtlineare Raman-Spektroskopie an biologisch relevanten Modellystemen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-1181438}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2001}, abstract = {Im Rahmen dieser Dissertation wurden insgesamt drei verschiedene Fragestellungen an biologisch relevanten Modellsystemen mit Hilfe von diversen linearen und nichtlinearen Raman-spektroskopischen Techniken bearbeitet. Neben der Untersuchung von Wasserstoffbr{\"u}cken-gebundenen Komplexen und ihrer Dynamik auf der fs-Zeitskala (Kapitel 4) bildeten Untersuchungen zur Struktur von Porphyrinen (Kapitel 5) und beta-Carotin (Kapitel 6) als Vertreter wichtiger Klassen von Biomolek{\"u}len den Schwerpunkt dieser Arbeit. Die spektroskopischen Ergebnisse wurden durchweg {\"u}ber Strukturen und Schwingungsspektren, welche mit Hilfe der Dichtefunktionaltheorie (DFT) berechnet wurden, unterst{\"u}tzt. Die dritte bearbeitete Thematik zum Nachweis anthropogener und {\"o}kologisch relevanter Aerosole war bioanalytisch motiviert und wurde anhand von Pestizid-Modellsubstanzen bearbeitet (Kapitel 7).}, subject = {Biomolek{\"u}l}, language = {de} } @article{SchleierReuschLummeletal.2019, author = {Schleier, Domenik and Reusch, Engelbert and Lummel, Lisa and Hemberger, Patrick and Fischer, Ingo}, title = {Threshold photoelectron spectroscopy of IO and IOH}, series = {ChemPhysChem}, volume = {20}, journal = {ChemPhysChem}, number = {19}, doi = {10.1002/cphc.201900813}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-204751}, pages = {2413-2416}, year = {2019}, abstract = {Iodine oxides appear as reactive intermediates in atmospheric chemistry. Here, we investigate IO and HOI by mass-selective threshold photoelectron spectroscopy (ms-TPES), using synchrotron radiation. IO and HOI are generated by photolyzing iodine in the presence of ozone. For both molecules, accurate ionization energies are determined, 9.71±0.02 eV for IO and 9.79±0.02 eV for HOI. The strong spin-spin interaction in the 3Σ- ground state of IO+ leads to an energy splitting into the Ω=0 and Ω=±1 sublevels. Upon ionization, the I-O bond shortens significantly in both molecules; thus, a vibrational progression, assigned to the I-O stretch, is apparent in both spectra.}, language = {en} } @phdthesis{Schleier2021, author = {Schleier, Domenik}, title = {Using Photoionization to Investigate Reactive Boron Species and the Kinetics of Hydrocarbon Radicals}, doi = {10.25972/OPUS-24213}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-242137}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {This thesis highlights the importance of isomer-selective approaches for the complete analysis of chemical processes. The method of choice is photoelectron/photoion coincidence spectroscopy, which allows simultaneous detection of electrons and ions coming from a single ionization event. Ionization techniques are sensitive and can record multiple species simultaneously, rendering them ideal tools to probe molecular transformations. Coupling these setups to synchrotron radiation allows one to analyze complex mixtures with isomer selectivity, based on ionization energies and vibrational structure in the cation, without any prior separation steps. Only few setups exist that can be used to gather these data, although their impact and applicability is growing steadily in various fields. For closed-shell species an easier and more widely used method is gas-chromatography, but most open shell species would not survive the separation process. Due to the reactivity of radicals they have to be created by selectively converting stable precursor molecules. Depending on the radical generation method different properties can be investigated ranging from thermodynamic data, over concentrations in high temperature environments, to chemical kinetics. The first part of this thesis deals with the determination of bimolecular rate constants. Isomeric hydrocarbon radicals were generated by a high intense UV light pulses and their kinetics with oxygen was measured. The pressure dependence of different isomers in the falloff region was compared to theoretical models, and their reactivity could be explained. The second part deals with boron containing compounds in various electronic situations. The corresponding precursors were successfully synthesized or could be bought. They were subjected to fluorine atoms in chemical reactors or destroyed pyrolytically at high temperatures. Most investigated species exhibited vibronic effects that could be elucidated using high level computations.}, subject = {Biradikal}, language = {en} } @phdthesis{Sauer2021, author = {Sauer, Susanne}, title = {Implementation and Application of QM/MM Hybrid Methods}, doi = {10.25972/OPUS-24321}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-243213}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {Within this work, an additive and a subtractive QM/MM interface were implemented into CAST. The interactions between QM and MM system are described via electrostatic embedding. Link atoms are used to saturate dangling bonds originating from the separation of QM and MM system. Available energy evaluation methods to be combined include force fields (OPLSAA and AMBER), semi-empirical programs (Mopac and DFTB+), and quantum-chemical methods (from Gaussian, Orca, and Psi4). Both the additive and the subtractive interface can deal with periodic boundary conditions. The subtractive scheme was extended to enable QM/QM, three-layer, and multi-center calculations. Another feature only available within the subtractive interface is the microiteration procedure for local optimizations. The novel QM/MM methods were applied to the investigation of the reaction path for the complex formation between rhodesain and K11777. Benchmark calculations show a very good agreement with results from Gaussian-ONIOM. When comparing the relative energies obtained with different options to a computation where the whole system was treated with the "QM method" DFTB3, the electrostatic embedding scheme with option "delM3" gives the best results. "delM3" means that atoms with up to three bonds distance to the QM region are ignored when creating the external charges. This is done in order to avoid a double counting of Coulomb interactions between QM and MM system. The embedding scheme for the inner system in a three-layer calculation, however, does not have a significant influence on the energies. The same is true for the choice of the coupling scheme: Whether the additive or the subtractive QM/MM interface is applied does not alter the results significantly. The choice of the QM region, though, proved to be an important factor. As can be seen from the comparison of two QM systems of different size, bigger is not always better here. Instead, one has to make sure not to separate important (polar) interactions by the QM/MM border. After this benchmark study with singlepoint calculations, the various possibilities of CAST were used to approximate the solution of a remaining problem: The predicted reaction energy for the formation of the rhodesain-K11777 complex differs significantly depending on the starting point of the reaction path. The reason for this is assumed to be an inadequate adjustment of the environment during the scans, which leads to a better stabilization of the starting structure in comparison to the final structure. The first approach to improve this adjustment was performing the relaxed scan with a bigger QM region instead of the minimal QM system used before. While the paths starting from the covalent complex do not change significantly, those starting from the non-covalent complex become more exothermic, leading to a higher similarity of the two paths. Nevertheless, the difference of the reaction energy is still around 15 kcal/mol, which is far from a perfect agreement. For this reason, Umbrella Samplings were run. Here, the adjustment of the environment is not done by local optimizations like in the scans, but by MD simulations. This has the advantage that the system can cross barriers and reach different local minima. The relative free energies obtained by Umbrella Samplings with suitable QM regions are nearly identical, independently of the starting point of the calculation. Thus, \(\Delta A\) evaluated by these computations can be assumed to reproduce the real energy change best. An MD simulation that was started from the transition state in order to mimic a "real-time" reaction indicates a very fast adjustment of the environment during the formation of the complex. This confirms that Umbrella Sampling is probably better suitable to describe the reaction path than a scan, where the environment can never move strong enough to leave the current local minimum.}, subject = {Quantenmechanik}, language = {en} } @article{SaalfrankFantuzziKupferetal.2020, author = {Saalfrank, Christian and Fantuzzi, Felipe and Kupfer, Thomas and Ritschel, Benedikt and Hammond, Kai and Krummenacher, Ivo and Bertermann, R{\"u}diger and Wirthensohn, Raphael and Finze, Maik and Schmid, Paul and Engel, Volker and Engels, Bernd and Braunschweig, Holger}, title = {cAAC-Stabilized 9,10-diboraanthracenes—Acenes with Open-Shell Singlet Biradical Ground States}, series = {Angewandte Chemie International Edition}, volume = {59}, journal = {Angewandte Chemie International Edition}, number = {43}, doi = {10.1002/anie.202008206}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-217795}, pages = {19338 -- 19343}, year = {2020}, abstract = {Narrow HOMO-LUMO gaps and high charge-carrier mobilities make larger acenes potentially high-efficient materials for organic electronic applications. The performance of such molecules was shown to significantly increase with increasing number of fused benzene rings. Bulk quantities, however, can only be obtained reliably for acenes up to heptacene. Theoretically, (oligo)acenes and (poly)acenes are predicted to have open-shell singlet biradical and polyradical ground states, respectively, for which experimental evidence is still scarce. We have now been able to dramatically lower the HOMO-LUMO gap of acenes without the necessity of unfavorable elongation of their conjugated π system, by incorporating two boron atoms into the anthracene skeleton. Stabilizing the boron centers with cyclic (alkyl)(amino)carbenes gives neutral 9,10-diboraanthracenes, which are shown to feature disjointed, open-shell singlet biradical ground states.}, language = {en} } @phdthesis{Ruehl2014, author = {R{\"u}hl, Nicolas}, title = {Spektroelektrochemie an einzelnen (6,5)-Kohlenstoffnanor{\"o}hren}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-112162}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {Im Rahmen der vorliegenden Arbeit wurde durch einzelmolek{\"u}lspektroskopischer bzw. -mikroskopischer Methoden in Kombination mit einer mikrofluischen Zel- le unter Potenzialkontrolle die Elektrochemie von einzelnen einwandigen (6,5)- Kohlenstoffnanor{\"o}hren untersucht. Hierf{\"u}r wurde ein Nahinfrarot-Photolumineszenz- Mikroskop aufgebaut und eine speziell an die experimentellen Vorgaben angepasste elektrochemische Zelle entwickelt, insofern als drei Elektroden (Arbeits-, Gegen- und Referenzelektrode) in einen mikrofluidischen Chip integriert wurden. Dar{\"u}ber hinaus war f{\"u}r die Durchf{\"u}hrung der Experimente unter Wasser- und Sauerstoffaus- schluss die Konstruktion eines Handschuhkastens notwendig, sowie eine allgemeine Vorbehandlung der Elektrolytl{\"o}sungen zur Entfernung gel{\"o}ster Gase und Wasserreste. Ein weiteres Projekt umfasste den Aufbau einer chemischen Gasphasenabschei- dungsapparatur zur Synthese von Kohlenstoffnanor{\"o}hren. Die hierbei durchgef{\"u}hrten Experimente erbrachten Klarheit {\"u}ber den Einfluss der Prozessparameter Druck, Temperatur und Durchflussrate an Edukten. Aus den PL-Intensit{\"a}ts{\"a}nderungen bei Potenzialvariation konnten Reduktions- und Oxidationspotenziale (ERed = 0.15 V; EOx = 1.34 V) einzelner (6,5)-SWNTs gegen- {\"u}ber einer Platin Referenzelektrode und einem daraus resultierenden Redoxpotenzial von ∆ERedOx = 1.19 V ermittelt werden. Durch diese einzelmolek{\"u}lspektroskopische Methode konnte zum einen gew{\"a}hrleistet werden, dass nur dieser spezielle Chira- lit{\"a}tstyp untersucht wurde und zum anderen eine Verf{\"a}lschung der Resultate durch einen Potenzialabfall wie er typischerweise in CNT-Filmen auftritt aussgeschlossen werden. Eine Kombination der PL-Daten mit der Ramanintensit{\"a}tsabh{\"a}ngigkeit des (6,5)-SWNT-S2-{\"U}bergangs bei Potenzialvariation erlaubte eine genauere Analyse des L{\"o}schmechanismus der PL von Kohlenstoffnanor{\"o}hren. Mithilfe eines von Her- tel et al. entwickelten diffusionslimitierten Stoßdesaktivierungsmodells konnte eine invers-quadratische Proportionalit{\"a}t zwischen der (6,5)-SWNT-Emission und den spannungsinduzierten Ladungstr{\"a}gern ausgemacht werden. Auf Grundlage dieses Ergebnisses folgt, dass die {\"u}ber Photolumineszenz{\"a}nderungen ermittelten Reduktions-und Oxidationswerte nicht mit den Bandkanten der CNTs {\"u}bereinstimmen m{\"u}ssen, und dass f{\"u}r deren Bestimmung vielmehr auf Raman- bzw. Absorptionsspektroskopi- sche Techniken zur{\"u}ckgegriffen werden muss. Die einzelmolek{\"u}lspektroskopische Herangehensweise erm{\"o}glichte ferner eine statis- tische Analyse der Verteilung der Reduktions- und Oxidationspotenziale im Vergleich zu den jeweiligen Erwartungswerten. Hierdurch konnte eine Einteilung der Modifika- tionseinfl{\"u}sse auf das SWNT-Redoxverhalten in zwei Grenzf{\"a}lle erfolgen. Es wurde angenommen, dass diese als "Dispergiermitteleffekte" und "CNT-Strukturdefekte" be- zeichneten Auswirkungen entweder das Resultat einer heterodispersen Verteilung an DOC auf der CNT-Oberfl{\"a}che oder eine Folge von Defekten in der CNT-Gitterstruktur waren. In diesem Zusammenhang ergab sich aus der interpartikul{\"a}ren Analyse der Reduktions- und Oxidationswerte eine Korrelation, die einem dominierenden Einfluss der "CNT-Strukturdefekte" zugeordnet werden konnte. Dieser Beobachtung entgegen- gesetzt konnten aber auch {\"u}ber Untersuchungen der Redoxpotenziale innerhalb einer (6,5)-SWNT lokale Bereiche ausgemacht werden, die eine signifikante Abh{\"a}ngigkeit von "Dispergiermitteleffekte" aufwiesen. Abgesehen von diesen Einfl{\"u}ssen auf den Emissionsverlauf wurde auch eine Be- trachtung der Breite des spannungsgesteuerten Emissionsabfall durchgef{\"u}hrt. Da- raus konnte ermittelt werden, dass diese Ausdehnung eine Konsequenz aus der PL- L{\"o}schungseffizienz der Ladungstr{\"a}ger ist und, dass bei einer Verteilung von 0.32 L{\"o}schzentren pro Nanometer eine vollst{\"a}ndige Abnahme der Photolumineszenzinten- sit{\"a}t induziert wird. Dar{\"u}ber hinaus wurde im Rahmen dieser Arbeit das redoxchemische Verhalten in- dividueller (6,5)-SWNTs in Wechselwirkung mit Ferrocenmolek{\"u}len untersucht. Die erhaltenen Ergebnisse ließen annehmen, dass die sich ausbildende Verbindung nicht-kovalenter Natur ist. Zwei verschiedene Gr{\"u}nde f{\"u}hrten zu dieser Erkennt- nis: einerseits ließen sich die Ferrocenmolek{\"u}le von der CNT-Oberfl{\"a}che durch ein Durchsp{\"u}len des mikrofluidischen Kanals mit einer reinen DMF-L{\"o}sung entfernen und andererseits war keine dauerhafte Emissionsminderung durch die Ausbildung kovalenter Bindungen zu beobachten. Aus der potenzialabh{\"a}ngigen PL wurde zudem ein Elektronentransfer der Ferrocenmolek{\"u}le in die optisch generierten L{\"o}cher des CNT-Valenzbandes festgestellt und {\"u}ber eine anregungsintensit{\"a}tsabh{\"a}ngige Messung die Zunahme dieses Ladungstransfers bei steigendem Photonenfluss nachgewiesen. Hinsichtlich der Anwendung von Kohlenstoffnanor{\"o}hren zur Elektrolyse bzw. Photo- lyse von Wasser wurde auch die Redoxchemie von (6,5)-SWNTs in diesem Solvens untersucht. Bez{\"u}glich der Emissionsintensit{\"a}t konnte gezeigt werden, dass diese im Vergleich zu organischen L{\"o}sungsmitteln reduziert vorliegt. Außerdem wurde eine irreversible Reaktion nach anodischer Polarisation {\"u}ber eine dauerhafte L{\"o}schung der PL beobachtet. Die Bestimmung der hierf{\"u}r notwendigen Reaktionsumst{\"a}nde erbrachte, dass Wasser, Exzitonen (erzeugt durch optische Anregung) und spannungs- induzierte L{\"o}cher im Valenzband zur Bildung einer [SWNT(Q)]-Spezies f{\"u}hren, welche die irreversible Minderung der CNT-Emission verursacht. Dar{\"u}ber hinaus konnte die Reaktionsgeschwindigkeit {\"u}ber eine Kinetik pseudo-nullter-Ordnung be- schrieben werden, unter der Voraussetzung, dass die soeben genannten Parameter konstant verblieben. Desweiteren zeigte sich in einer ferrocenhaltigen L{\"o}sung, dass der L{\"o}scheffekt der [SWNT(Q)]-Spezies im anodischen Potenzialbereich teilweise reduziert wird. Es wurde angenommen, dass diese Beobachtung auf eine Oxidation der L{\"o}schzentren durch die Fc+-Kationen gr{\"u}ndet. Mit Hilfe der CVD-Apparatur gelang es Kohlenstoffnanor{\"o}hren zu synthetisieren, wobei Ethanol als Kohlenstoffquelle und ein Eisen-Kobalt-Zeolith-Gemenge als Ka- talysator diente. Die Analyse der verschiedenen Prozessparameter zeigte, dass bei T = 750 °C das beste Verteilungsverh{\"a}ltnis zwischen den gew{\"u}nschten (6,5)-SWNTs und anderen CNT-Chiralit{\"a}ten bzw. dem amorphen Kohlenstoff vorliegt. Hierf{\"u}r war, dass bei T < 750 °C die Verbrennung unerw{\"u}nschter amorpher Kohlenstoffreste nur geringf{\"u}gig stattfindet, und dass bei T > 750 °C die Bildung anderer Chiralit{\"a}ten mit gr{\"o}ßerem Durchmesser als die (6,5)-SWNT bevorzugt wurde. Die Variation der Durchflussrate hingegen wirkte sich nur in einer absoluten Zunahme aller Chirali- t{\"a}ten aus. Die Steigerung des (6,5)-SWNT-Anteils f{\"u}r h{\"o}here Durchfl{\"u}sse gelang trotzdem durch die geschickte Auswahl geeigneter Druck- und Temperaturwerte. Die Experimente zur Untersuchung der Druckabh{\"a}ngigkeit wiesen auf eine Relation mit dem Gesetz von Le Chatelier hin, insofern als bei einer Druckverringerung eine Verschiebung der Ethanol-Crackreaktion auf Produktseite stattfand. In diesem Zusam- menhang wurde angenommen, dass die damit verst{\"a}rkt gebildeten Molek{\"u}le Ethan, Ethen und Methan den CNT-Anteil zwar erh{\"o}hen, jedoch auch eine Steigerung der amorphen Kohlenstoffkonzentration verursachen. Dementsprechend ergab ein Druck von p = 9 mbar das beste (6,5)-SWNT zu dem amorphen Kohlenstoffverh{\"a}ltnis. Anhand der Arbeiten in dieser Dissertation sind neue Erkenntnisse zwischen der PL-Sensitivit{\"a}t von (6,5)-SWNTs und deren Ladungszustand erhalten worden. Insbe- sondere die genaue Bestimmung der Korrelation zwischen der Photolumineszenz und den induzierten Ladungstr{\"a}gern erm{\"o}glicht einen gezielteren Einsatz von Kohlenstoff- nanor{\"o}hren - so zum Beispiel im Bereich der Sensorik. In diesem Zusammenhang zeigen auch die interpartikul{\"a}ren Analysen der Redoxpotenzialverteilung die genau- en Auswirkungen vom L{\"o}sungsmittel und der Defektdichte auf die elektronische Struktur der CNTs auf. Dar{\"u}ber hinaus kann aus der Ursachenbestimmung f{\"u}r die Varianz der literaturbekannten Reduktions- bzw. Oxidationspotenziale fortan die ge- eignete spektroskopische Methode zur Evaluierung der Position von Leitungs- und Valenzband in Kohlenstoffnanor{\"o}hren besser eingegrenzt werden. Die spektroelektro- chemischen Analysen von (6,5)-SWNTs im L{\"o}sungsmittel Wasser und speziell die Bestimmung der Kinetik f{\"u}r die auftretende Reaktion liefern einen tieferen Einblick in die Wechselwirkung (6,5)-SWNT-H2O. Diese Ergebnisse sind insbesondere bei der Verwendung von Kohlenstoffnanor{\"o}hren als Elektrodenmaterial f{\"u}r die photolytische bzw. elektrolytische Spaltung von Wasser in Wasserstoff und Sauerstoff von Bedeu- tung. Neben der Untersuchung der SWNT-Wasser Interaktion unter andoischer und optischer Anregung, die zu einer kovalenten Bindung f{\"u}hrte, wurde mit Hilfe der (6,5)- SWNT-Ferrocen Wechselwirkung ein Beispiel f{\"u}r eine nichtkovalente Redoxreaktion dargestellt, womit ein Vergleich dieser beiden Spezies und ihrer unterschiedlichen Auswirkungen auf die elektronische Struktur aufgezeigt werden konnte.}, subject = {Spektroelektrochemie}, language = {de} } @phdthesis{Roesch2002, author = {R{\"o}sch, Petra}, title = {Raman-spektroskopische Untersuchungen an Pflanzen und Mikroorganismen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-3539}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2002}, abstract = {In dieser Arbeit werden Pflanzen, Pflanzengewebe, Pflanzenzellen und Mikro-organismen spektroskopisch untersucht und ihre Inhaltsstoffe unter minimaler Probenpr{\"a}paration im biologischen Gewebe direkt lokalisiert und identifiziert. Unter den verf{\"u}gbaren Schwingungs-spektroskopischen Methoden ist die Mikro-Raman-Spektroskopie f{\"u}r diese Fragestellungen besonders gut geeignet, da Wasser Raman-Spektren nur wenig beeinflusst. Daher kann mit Raman-spektroskopischen Methoden auch in stark wasserhaltigem Gewebe gemessen werden. Weiterhin erh{\"a}lt man mit der Mikro-Raman-Spektroskopie eine gute r{\"a}umliche Aufl{\"o}sung im sub-µm-Bereich, wodurch es m{\"o}glich ist, heterogene Proben zu untersuchen. Dar{\"u}ber hinaus kann die Mikro-Raman-Spektroskopie mit anderen Methoden, wie z. B. der oberfl{\"a}chenverst{\"a}rkten Raman-Spektroskopie (SERS), kombiniert werden. In pflanzlichen Zellen liegt eine Vielzahl von Substanzen in geringen Konzentrationen vor. Aufgrund der niedrigen Quantenausbeute des Raman-Effekts treten vor allem Substanzen, die eine Resonanz-Verst{\"a}rkung erfahren, in den Spektren hervor. Diese Substanzen, wie z. B. b-Carotin, k{\"o}nnen deshalb in geringen Konzentrationen detektiert werden. Der Schwerpunkt dieser Arbeit liegt in der Untersuchung von Sekund{\"a}r-Metaboliten wie Alkaloiden, Lipiden oder Terpenen, die in der Pflanze agglomerieren. Neben der Identifikation von Inhaltsstoffen, k{\"o}nnen die Raman-Spektren von Pflanzen f{\"u}r die chemotaxonomische Klassifizierung mit Hilfe der hierarchischen Clusteranalyse verwendet werden. Die Identifizierung von Mikroorganismen auch in sehr geringen Mengen (Monolage, einzelne Zellen) ist mit der Mikro-Raman-Spektroskopie nur unter bestimmten Voraussetzungen durchf{\"u}hrbar. F{\"u}r weitergehende Untersuchungen wird hier die SERS-Sonde oder ein TERS-Aufbau verwendet werden.}, subject = {Pflanzen}, language = {de} } @phdthesis{Rudolf2014, author = {Rudolf, Philipp Benjamin}, title = {Uncovering photoinduced chemical reaction pathways in the liquid phase with ultrafast vibrational spectroscopy}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-96200}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {The experimental technique predominantly employed within the scope of this Thesis constitutes one subarea of femtochemistry: the time-resolved spectroscopy of photoin- duced chemical reactions in the liquid phase by means of molecular signatures in the mid-infrared (MIR) spectral range. Probing transient vibrational states, i.e., dynamic changes in the vibrational motion of speci� c molecular subunits or functional Groups allows for a distinct separation and assignment of measured signals to emerging molecular species. For this purpose, one key building block is indispensable, which most of the investigations carried out within the � eld of femtochemistry have in common: a coherent light source delivering ultrashort laser pulses with a temporal duration that matches the femtosecond time scale on which molecular motions typically occur. This instrumentation enables the observation of photoinduced chemical reactions from the starting point|the excitation event to the appearance of intermediates to the nal formation of stable photoproducts after several pico- or nanoseconds. This work comprises the acquisition and presentation of time-resolved spectroscopic data related to promising molecular systems upon photoexcitation as well as the im- plementation and testing of experimental optical techniques both for the presented experiments but as well for experiments conceivable in the future. In addition, linear spectroscopy measurements and quantum-chemical simulations on the emerging chemical species have been carried out. In so doing, the primary processes and subse- quently emerging reaction products of two compounds on a timescale of several nanoseconds after photoexcitation have been elucidated in great detail. Both compounds, the [Mn(CO)3(tpm)]+ (tpm = tris(2-pyrazolyl)methane) CO-releasing molecule (CORM) and the 5-diazo Meldrum's acid (DMA), are of academic interest but in addition belong to molecular classes that might be utilized in the near future as dark-stable prodrugs under physiological conditions or that are already utilized in industrial chemistry procedures, respectively. The � ndings of both studies gave rise to implement and examine two techniques for prospective transient absorption experiments, namely the shaping and characterization of ultraviolet (UV) laser pulses and the recording of two-photon excitation spectra. Beyond that, since each of the depicted experiments is based on the detection of weak transient absorption signals in the MIR spectral region, two dif- ferent detection schemes, via chirped-pulse upconversion (CPU) on the one hand and via direct multichannel MCT detection on the other hand, have been juxtaposed at the conclusion of this work. Since both techniques are suitable in femtosecond pump-probe measurements but thereby exhibit individual strengths and weaknesses, a comparative study provides clari� cation of the respective pros and cons. The � first study introduced within this work investigates the complex photochemistry of DMA, a photoactive compound used in lithography and industrial chemistry. By femtosecond MIR transient absorption spectroscopy covering several nanoseconds, the light-induced dynamics and ultrafast formation of several photoproducts from the manifold of reaction pathways have been disclosed to form a coherent picture of the overall reaction scheme. After UV excitation of DMA dissolved in methanol to the second excited state S2, 70\% of excited molecules relax back to the S0 ground state. In compet- ing processes, they can either undergo an intramolecular Wolff rearrangement to form ketene, which reacts with a solvent molecule to an enol intermediate and further to carboxylate ester, or they � rst relax to the DMA S1 state, from where they can isomerize to a diazirine. The third competing reaction channel, having the lowest quantum efficiency with respect to the � rst two channels, is the formation of a singlet carbene out of the S1 state. From there an ylide can arise or, via an intersystem crossing, the triplet form of the carbene follows. Whereas the primary reaction steps occur on a picosecond timescale, the subsequently arising intermediates and stable photoproducts are formed within a few hundreds to thousands of picoseconds. For a reliable identi� cation of the involved compounds, density functional theory calculations on the normal modes and Fourier-transform infrared spectroscopy of the reactant and the photoproducts in the chemical equilibrium accompany the analysis of the transient spectra. Additional experiments in ethanol and isopropanol led to slight spectral shifts as well as elongated time constants due to steric hindrance in transient spectra connected with the ester Formation channel, further substantiating the assignment of the occurring reaction pathways and photoproducts. The study demonstrated that the combination of linear and time-resolved spectroscopic measurements in conjunction with quantum-chemical calculations constitutes a powerful tool to unravel even highly complex photoreactions exhibiting multiple consecutive intermediate states within parallel reaction pathways. Although some of the individual reaction steps, for example the ketene formation via Wolff rearrangement, have been observed on ultrashort time scales before, this work encompassed the Observation of the whole set of appearing photoproducts of DMA in different alcohol solutions within several nanoseconds. In this sense, the ultrafast photochemistry of DMA represents a prototype example for a multisequential reaction scheme, elucidated by the capabilities of femtosecond MIR spectroscopy. With a modi� fied instrumentation concerning amongst others the system delivering the fundamental laser pulses or the generation of the UV pump pulses, the next ob- jective within this work was to elucidate the primary processes upon UV Irradiation of a manganese tricarbonyl CORM in aqueous environment. The time-resolved experiment was performed with two different pump wavelengths and furthermore supported by linear spectroscopy methods and time-dependent density functional theory (TDDFT) calculations on the excited states as well as DFT calculations on the ground states. The measurements revealed that irradiating the compound with UV excitation pulses primarily leads to ultrafast photolysis of one CO ligand. Geminate recombination may occur within one picosecond but it remains a minor process as the photolyzed CO group is liberated and the unoccupied coordination site is predominantly fi� lled by an incoming solvent molecule. There was no evidence for hot CO bands, i.e., the remaining CO ligands|in the dicarbonyl photoproduct as well as in the intact CORM are not vibrationally excited through the UV excitation of the CORM. According to this, the excess energy merges into low-frequency vibrational modes associated with the molecule as a whole. Since studies on a macroscopic scale at irradiation times of several minutes prove that UV irradiation eventually leads to the release of two or even all three CO ligands, further loss of CO most likely necessitates manganese oxidation or another interaction with light. To clarify the latter, a consecutive UV pulse was employed in order to excite the photoproducts subsequent to the initial pump interaction. However, the data obtained was not instructive enough to de� nitely exclude the manganese oxidation being responsible for the loss of further CO groups. Besides the exchange of a CO Group by a solvent molecule or the geminate recombination, the employment of two different excitation wavelengths in combination with � ndings derived from the TDDFT calculations suggested another reaction process, namely the possibility that the excitation does not lead to any bond cleavage at all. As the CORM under investigation is tissue-selective and cytotoxic against cancer cells, knowledge of these � rst photoinduced reaction steps is essential for a full understanding of its biological activity. Inspired by these two studies, experimental techniques for prospective transient absorption measurements have been implemented and tested within preparative measure- ments. First, in the course of a UV-pump-MIR-probe experiment with speci� cally tailored excitation pulses, one could pursue the aim of coherently controlling the outcome of a photoreaction in the liquid phase. Out of the rich photochemistry of DMA the vibrational signature of a particular molecular species might thereby serve as a feedback signal, which is a central part of a learning loop that adaptively determines the pulse shape that steers the quantum mechanical system upon photoexcitation into a desired direction. This motivated the installation and testing of devices by means of which the shaping and characterization of ultrashort laser pulses in the UV could be performed. Second, motivated by the biological applications of CORMs, one can imagine a scenario where a certain amount of CORMs is deposited inside cancerous tissue. Since the activation of CO loss by means of UV pulses is not possible due to the absorption characteristics of biological tissue, the simultaneous excitation via two photons from the visible spectral regime seems appealing. However, success or failure of such an application depends on whether the deposited compound efficiently absorbs two photons simultaneously, i.e., whether the two-photon absorption cross section is large enough. Therefore, a setup to record two-photon excitation spectra under full consideration of the crucial laser pulse parameters like the pulse duration, energy and central wavelength was arranged and tested. The � rst results were obtained with a commercially available reference system (Mn2CO10) but the setup as well as the described measurement and data analysis procedure can easily be applied to record the two-photon absorption cross section of more promising molecular systems. Third, as the detection of probe pulses in the MIR spectral region is part of each time-resolved measurement throughout this thesis, a comparison between the newly established technique of CPU and direct multi- channel MCT detection is presented by means of pump{probe experiments on Mn2CO10 and Co4CO12 with a 1 kHz shot-to-shot data acquisition. It was shown that the CPU detection technique scores with its high spectral resolution and coverage of the easy-to-handle and more cost-effective CCD detectors. On the other hand, in the course of the additional nonlinear upconversion process intensity fluctuations of the chirped fundamental pulses are transferred to the probe spectrum in the visible regime. This entails a lower signal-to-noise ratio than the direct MCT detection, which can be compensated by an additional normalization procedure applied to the CPU probe pulses. As a consequence, the CPU detection scheme offers more flexibility for future investigations employing MIR probe pulses. This is of great importance for many applications within the presented � eld of femtochemistry as a huge variety of time-resolved investigations on a multitude of systems in the liquid phase is based on the detection of weak transient absorption signals in the MIR spectral region.}, subject = {Ultrakurzzeitspektroskopie}, language = {en} } @article{RoyTroesterFantuzzietal.2021, author = {Roy, Dipak Kumar and Tr{\"o}ster, Tobias and Fantuzzi, Felipe and Dewhurst, Rian D. and Lenczyk, Carsten and Radacki, Krzysztof and Pranckevicius, Conor and Engels, Bernd and Braunschweig, Holger}, title = {Isolation and Reactivity of an Antiaromatic s-Block Metal Compound}, series = {Angewandte Chemie International Edition}, volume = {60}, journal = {Angewandte Chemie International Edition}, number = {7}, doi = {10.1002/anie.202014557}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-224447}, pages = {3812 -- 3819}, year = {2021}, abstract = {The concepts of aromaticity and antiaromaticity have a long history, and countless demonstrations of these phenomena have been made with molecules based on elements from the p, d, and f blocks of the periodic table. In contrast, the limited oxidation-state flexibility of the s-block metals has long stood in the way of their participation in sophisticated π-bonding arrangements, and truly antiaromatic systems containing s-block metals are altogether absent or remain poorly defined. Using spectroscopic, structural, and computational techniques, we present herein the synthesis and authentication of a heterocyclic compound containing the alkaline earth metal beryllium that exhibits significant antiaromaticity, and detail its chemical reduction and Lewis-base-coordination chemistry.}, language = {en} } @article{RoedingBrixner2018, author = {Roeding, Sebastian and Brixner, Tobias}, title = {Coherent two-dimensional electronic mass spectrometry}, series = {Nature Communications}, volume = {9}, journal = {Nature Communications}, number = {2519}, doi = {10.1038/s41467-018-04927-w}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-226458}, pages = {1-9}, year = {2018}, abstract = {Coherent two-dimensional (2D) optical spectroscopy has revolutionized our ability to probe many types of couplings and ultrafast dynamics in complex quantum systems. The dynamics and function of any quantum system strongly depend on couplings to the environment. Thus, studying coherent interactions for different environments remains a topic of tremendous interest. Here we introduce coherent 2D electronic mass spectrometry that allows 2D measurements on effusive molecular beams and thus on quantum systems with minimum system-bath interaction and employ this to identify the major ionization pathway of 3d Rydberg states in NO2. Furthermore, we present 2D spectra of multiphoton ionization, disclosing distinct differences in the nonlinear response functions leading to the ionization products. We also realize the equivalent of spectrally resolved transient-absorption measurements without the necessity for acquiring weak absorption changes. Using time-of-flight detection introduces cations as an observable, enabling the 2D spectroscopic study on isolated systems of photophysical and photochemical reactions.}, language = {en} } @article{RewitzKeitzlTuchschereretal.2012, author = {Rewitz, Christian and Keitzl, Thomas and Tuchscherer, Philip and Goetz, Sebastian and Geisler, Peter and Razinskas, Gary and Hecht, Bert and Brixner, Tobias}, title = {Spectral-interference microscopy for characterization of functional plasmonic elements}, series = {Optics Express}, journal = {Optics Express}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-85922}, year = {2012}, abstract = {Plasmonic modes supported by noble-metal nanostructures offer strong subwavelength electric-field confinement and promise the realization of nanometer-scale integrated optical circuits with well-defined functionality. In order to measure the spectral and spatial response functions of such plasmonic elements, we combine a confocal microscope setup with spectral interferometry detection. The setup, data acquisition, and data evaluation are discussed in detail by means of exemplary experiments involving propagating plasmons transmitted through silver nanowires. By considering and experimentally calibrating any setup-inherent signal delay with an accuracy of 1 fs, we are able to extract correct timing information of propagating plasmons. The method can be applied, e.g., to determine the dispersion and group velocity of propagating plasmons in nanostructures, and can be extended towards the investigation of nonlinear phenomena.}, language = {en} } @article{ReuschHolzmeierGerlachetal.2019, author = {Reusch, Engelbert and Holzmeier, Fabian and Gerlach, Marius and Fischer, Ingo and Hemberger, Patrick}, title = {Decomposition of Picolyl Radicals at High Temperature: A Mass Selective Threshold Photoelectron Spectroscopy Study}, series = {Chemistry - A European Journal}, volume = {25}, journal = {Chemistry - A European Journal}, number = {72}, doi = {10.1002/chem.201903937}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-208132}, pages = {16652-16659}, year = {2019}, abstract = {The reaction products of the picolyl radicals at high temperature were characterized by mass-selective threshold photoelectron spectroscopy in the gas phase. Aminomethylpyridines were pyrolyzed to initially produce picolyl radicals (m /z =92). At higher temperatures further thermal reaction products are generated in the pyrolysis reactor. All compounds were identified by mass-selected threshold photoelectron spectroscopy and several hitherto unexplored reactive molecules were characterized. The mechanism for several dissociation pathways was outlined in computations. The spectrum of m /z =91, resulting from hydrogen loss of picolyl, shows four isomers, two ethynyl pyrroles with adiabatic ionization energies (IE\(_{ad}\)) of 7.99 eV (2-ethynyl-1H -pyrrole) and 8.12 eV (3-ethynyl-1H -pyrrole), and two cyclopentadiene carbonitriles with IE′s of 9.14 eV (cyclopenta-1,3-diene-1-carbonitrile) and 9.25 eV (cyclopenta-1,4-diene-1-carbonitrile). A second consecutive hydrogen loss forms the cyanocyclopentadienyl radical with IE′s of 9.07 eV (T\(_0\)) and 9.21 eV (S\(_1\)). This compound dissociates further to acetylene and the cyanopropynyl radical (IE=9.35 eV). Furthermore, the cyclopentadienyl radical, penta-1,3-diyne, cyclopentadiene and propargyl were identified in the spectra. Computations indicate that dissociation of picolyl proceeds initially via a resonance-stabilized seven-membered ring.}, language = {en} } @article{RestPhilipsDuennebackeetal.2020, author = {Rest, Christina and Philips, Divya Susan and D{\"u}nnebacke, Torsten and Sutar, Papri and Sampedro, Angel and Droste, J{\"o}rn and Stepanenko, Vladimir and Hansen, Michael Ryan and Albuquerque, Rodrigo Q. and Fern{\´a}ndez, Gustavo}, title = {Tuning Aqueous Supramolecular Polymerization by an Acid-Responsive Conformational Switch}, series = {Chemistry - A European Journal}, volume = {26}, journal = {Chemistry - A European Journal}, number = {44}, doi = {10.1002/chem.202001566}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-218118}, pages = {10005 -- 10013}, year = {2020}, abstract = {Besides their widespread use in coordination chemistry, 2,2'-bipyridines are known for their ability to undergo cis-trans conformational changes in response to metal ions and acids, which has been primarily investigated at the molecular level. However, the exploitation of such conformational switching in self-assembly has remained unexplored. In this work, the use of 2,2'-bipyridines as acid-responsive conformational switches to tune supramolecular polymerization processes has been demonstrated. To achieve this goal, we have designed a bipyridine-based linear bolaamphiphile, 1, that forms ordered supramolecular polymers in aqueous media through cooperative aromatic and hydrophobic interactions. Interestingly, addition of acid (TFA) induces the monoprotonation of the 2,2'-bipyridine moiety, leading to a switch in the molecular conformation from a linear (trans) to a V-shaped (cis) state. This increase in molecular distortion along with electrostatic repulsions of the positively charged bipyridine-H\(^{+}\) units attenuate the aggregation tendency and induce a transformation from long fibers to shorter thinner fibers. Our findings may contribute to opening up new directions in molecular switches and stimuli-responsive supramolecular materials.}, language = {en} } @article{RangFantuzziArrowsmithetal.2021, author = {Rang, Maximilian and Fantuzzi, Felipe and Arrowsmith, Merle and Krummenacher, Ivo and Beck, Eva and Witte, Robert and Matler, Alexander and Rempel, Anna and Bischof, Tobias and Radacki, Krzysztof and Engels, Bernd and Braunschweig, Holger}, title = {Reduktion und Umlagerung eines Bor(I)-Carbonylkomplexes}, series = {Angewandte Chemie}, volume = {133}, journal = {Angewandte Chemie}, number = {6}, doi = {10.1002/ange.202014167}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-224409}, pages = {3000 -- 3005}, year = {2021}, abstract = {Bei der Einelektronenreduktion eines durch eine cyclisches (Alkyl)(amino)carben (CAAC) stabilisierten Arylborylen-Carbonylkomplexes erfolgt die Bildung eines dimeren Borylketyl-Radikalanions, bedingt durch eine intramolekulare Arylmigration zum CO Kohlenstoffatom. Computergest{\"u}tzte Analyse liefert Hinweise auf eine radikalanionische [(CAAC)B(CO)Ar]\(^{.-}\) Zwischenstufe. Weiterf{\"u}hrende Reduktion des entstandenen Komplexes liefert ein hoch nukleophiles (Boranyliden)methanolat.}, language = {de} } @phdthesis{Quast2012, author = {Quast, Tatjana}, title = {Spectroscopic investigation of charge-transfer processes and polarisation pulse shaping in the visible spectral range}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-74265}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {The first part deals with the spectroscopic investigation of ultrafast light-induced charge-transfer processes in different molecular compounds. In the second part, the question of the generation and characterisation of broadband visible polarisation-shaped laser pulses is treated.}, subject = {Polarisiertes Licht}, language = {en} } @article{PreitschopfSturmStroganovaetal.2023, author = {Preitschopf, Tobias and Sturm, Floriane and Stroganova, Iuliia and Lemmens, Alexander K. and Rijs, Anouk M. and Fischer, Ingo}, title = {IR/UV Double Resonance Study of the 2-Phenylallyl Radical and its Pyrolysis Products}, series = {Chemistry - A European Journal}, volume = {29}, journal = {Chemistry - A European Journal}, number = {13}, doi = {10.1002/chem.202202943}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-312338}, year = {2023}, abstract = {Isolated 2-phenylallyl radicals (2-PA), generated by pyrolysis from a nitrite precursor, have been investigated by IR/UV ion dip spectroscopy using free electron laser radiation. 2-PA is a resonance-stabilized radical that is considered to be involved in the formation of polycyclic aromatic hydrocarbons (PAH) in combustion, but also in interstellar space. The radical is identified based on its gas-phase IR spectrum. Furthermore, a number of bimolecular reaction products are identified, showing that the self-reaction as well as reactions with unimolecular decomposition products of 2-PA form several PAH efficiently. Possible mechanisms are discussed and the chemistry of 2-PA is compared with the one of the related 2-methylallyl and phenylpropargyl radicals.}, language = {en} } @phdthesis{Pfister2011, author = {Pfister, Johannes}, title = {On the correlation between the electronic structure and transport properties of [2.2]paracyclophanes and other aromatic systems}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-65362}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {Die vorliegende Arbeit pr{\"a}sentiert theoretische Untersuchungen zu Energie- und Ladungs-Transporteigenschaften in organischen Kristallen. Kapitel 4 behandelt Exzitonentransport in Anthracen bei dem der Fall einer schwachen Kopplung zwischen den π-Systemen vorliegt. Die elektronische Kopplung wird mit dem „monomer transition density" (MTD) Ansatz berechnet. Aus den Kopplungen und Reorganisationsenergien werden mit der Marcus-Theorie H{\"u}pfraten berechnet. Mit Kenntnis der Kristallstrukturen werden daraus in die experimentell zug{\"a}nglichen Exzitonendiffusionsl{\"a}ngen berechnet, deren isotroper Anteil im Rahmen der Streuung der experimentell zug{\"a}nglichen Daten reproduziert werden. Auch die Anisotropie der Exzitonendiffusionsl{\"a}ngen wird qualitativ und quantitativ im Rahmen der zu erwartenden Messgenauigkeit richtig wiedergegeben. Weiterhin enth{\"a}lt Kapitel 4 Untersuchungen zum Elektronen- und Lochtransport in den zwei verschiedenen Modifikationen (α und β) von Perylen. Reorganisationsenergien sowie Diffusionskonstanten wurden f{\"u}r beide beide Kristallstrukturen und Typen des Ladungstransports berechnet. Den besten Transport stellt dabei Lochtransport in β-Perylen dar, jedoch ist dieser stark isotrop. Die bevorzugte Transportrichtung is entlang der b-Achse der Einheitszelle mit elektronischen Kopplungen von gr{\"o}ßer als 100 meV. Allerdings gibt es hier keinerlei Lochtransport in Richtung der c-Achse. Die Diffusionskonstante in Richtung der b-Achse ist um zwei Gr{\"o}ßenordnungen gr{\"o}ßer als die in c-Richtung (62.7•10-6 m2/s vs. 0.4•10-6 m2/s). Der Ladungstransport wird sowohl f{\"u}r L{\"o}cher, als auch f{\"u}r Elektronen in beiden Perylenmodifikationen immer stark anisotrop berechnet. Um diese Resultate zu verifizieren wurden experimentelle Elektronenmobilit{\"a}ten in α-Perylen mit den Simulationen verglichen. Es stellte sich eine sehr gute {\"U}bereinstimmung heraus mit Fehlern von nur maximal 27\%. Wie oben gezeigt, ist es m{\"o}glich Transporteigenschaften in zwischen schwach wechselwirkenden Systemen zu berechnen und zu messen. Allerdings ist es hier schwierig, die G{\"u}te der zu Grunde liegenden Kopplungsparameter genau anzugeben. Aus diesem Gunde wurde eine Zusammenarbeit {\"u}ber stark wechselwirkede Systeme zwischen uns sowie den Arbeitskreis von Prof. Ingo Fischer begonnen. Dort wurden [2.2]Paracyclophane und dessen Derivate untersucht um zu zeigen, wie Substitution mit Hydroxylgruppen deren Absorptionseigenschaften beeinflusst. Eine Kombination der SCS-MP2 und SCS-CC2-Methoden liefert hierbei insgesamt die besten Ergebnisse um die geometrischen und elektronischen Strukturen f{\"u}r Grund- und angeregte Zust{\"a}nde dieser Modellsysteme sowie deren Stammmolek{\"u}len Benzol und Phenol zu beschreiben. Strukturell weist nur [2.2]Paracyclophan im Grundzustand ein Doppelminimumspotenzial bzgl. Verschiebung und Verdrillung der Benzol/Phenol-einheiten untereinander auf. Alle anderen Systeme sind aufgrund ihrer Substitution weniger flexibel. Fast alle untersuchten [2.2]Paracyclophane zeigen nur geringe Struktur{\"a}nderungen bei der Anregung in den S1 Zustand: Der Abstand zwischen den Ringen wird k{\"u}rzer, aber qualitativ behalten sie ihre Verdrillung und Verschiebung bei, wenn auch das Ausmaß dieser Verzerrungen reduziert wird. Die Ausnahme hierbei ist p-DHPC, welches von einer verschoben Struktur im Grundzustand in eine verdrillte Struktur im angeregten Zustand {\"u}bergeht. Dies hat zur Konsequenz, dass die Intensit{\"a}t des 0-0-{\"U}bergangs aufgrund der Franck-Condon Faktoren f{\"u}r p-DHPC experimentell nicht mehr beobachtet werden kann und von Verunreinigungen durch o-DHPC {\"u}berdeckt wird. Die Strukturen der Paracyclophane und deren {\"A}nderung durch elektronische {\"U}berg{\"a}nge werden in dieser Arbeit durch elektrostatische Potenziale sowie den antibindenen (bindenden) HOMO (LUMO) Orbitalen erkl{\"a}rt. Adiabatische Anregungsenergien wurden mit Nullpunktsschwingungsenergien korrigiert und liefern Genauigkeiten deren Fehler weniger als 0,1 eV betr{\"a}gt. Hierbei ist zu beachten, dass eine Korrektur auf B3LYP Niveau die Ergebnisse verschlechtert und man die Berechnung der Schwingungsfrequenzen auf SCS-CC2 durchf{\"u}hren muss um diese Genauigkeit zu erhalten. Aufgrund dieser Rechnungen wurde eine Interpretation der experimentellen [1+1]REMPI Spektren m{\"o}glich. Bandenprogressionen f{\"u}r die Schwingungen der Verschiebung, der Verdrillung und einer Atmung im [2.2]Paracyclophanskelett wurden identifiziert und zeigen gute {\"U}bereinstimmung zum Experiment. Diese Arbeiten zeigen, dass das Substitutionsschema von [2.2]Paracyclophanen eine erhebliche Auswirkung auf die spektroskopischen Eigenschaften haben kann. Da diese Eigenschaften direkt mit den Transporteigenschaften dieser Materialien verbunden ist, kann das hier gewonnene Verst{\"a}ndnis der spektroskopischen Eigenschaften genutzt werden, um Materialien mit maßgeschneiderten Transporteigenschaften zu designen. Es konnte gezeigt werden, dass die SCS-CC2-Methode sehr gut geeignet ist, die zu Grunde liegende Wechselwirkung zwischen den π-Systemen vorherzusagen.}, subject = {Ladungstransport}, language = {en} } @phdthesis{Petry2002, author = {Petry, Renate}, title = {Spektroskopische Strukturanalytik synthetischer Polypeptide}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-664}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2002}, abstract = {In der vorliegenden Arbeit wurden zwei spektroskopische Methoden (Raman- und Circulardichroismus-Spektroskopie) und die Kernspinresonanz zur Untersuchung der Sekund{\"a}rstruktur von synthetischen Polypeptiden eingesetzt. Dabei wurden die Struktur-Funktions-Beziehungen der dritten extrazellul{\"a}ren Schleife des Gonadotropin-freisetzenden Rezeptors (GnRH-R) untersucht. Die spektroskopischen Ergebnisse belegten, dass die zuvor getroffene Aussage {\"u}ber eine vorhandene helikale Struktur revidiert werden musste. Die Strukturanalysen mit Hilfe der CD-, Raman- und 2D NMR-Experimente an zwei Serien von Polypeptiden lieferten Aussagen {\"u}ber die Sekund{\"a}rstruktur. Insbesondere die Raman-Untersuchungen in Verbindung mit einer statistischen Datenanalyse lieferten detaillierte Information {\"u}ber subtile Konformations{\"a}nderungen, die einerseits durch die Addition und andererseits durch die Substitution einzelner Aminos{\"a}uren in den synthetischen Polypeptiden ausgel{\"o}st wurden. Anhand der ausgew{\"a}hlten Raman-Linien konnte nachgewiesen werden, dass sowohl die {\"A}nderungen der Polypeptidkettenl{\"a}nge als auch die {\"A}nderung der Polypeptidsequenzen mit den beobachteten Intensit{\"a}ten der Raman-Linien korreliert sind.}, subject = {Synthetische Polypeptide}, language = {de} } @phdthesis{Peica2006, author = {Peica, Niculina}, title = {Vibrational spectroscopy and density functional theory calculations on biological molecules}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-20913}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2006}, abstract = {Infrared (IR) and Raman spectroscopy are among the most widely used techniques in the physical and natural sciences today. Vibrational spectroscopy, including IR and Raman spectroscopy, has both a long and interesting history and an illustrious record of contributions to science. Spectroscopy in the pharmaceutical industry is dominated by techniques such as nuclear magnetic resonance (NMR) and mass spectrometry (MS) for the elucidation of chemical structures. Despite this, the versatility of infrared spectroscopy ensures it still remains a key technique in quality control laboratories, and in applications where solid form characterization or minimal sample preparation is a necessity. Raman spectroscopy has many uses in the pharmaceutical and chemical industry, but its strengths is in solid form analysis. It is regularly used to identify compounds, and results are used in the release of pharmaceutical and chemical products. This work consists of 8 chapters, which cover the vibrational spectroscopy beginning with the theory and instrumentation, continuing with the experimental setup and probes description, and completing with results and discussions of the experiments. The first chapter of this work introduces Raman spectroscopy as a dominant technique used in pharmaceutical and chemical industry. The theoretical background regarding vibrational spectroscopy (IR and Raman) is accounted for in the second chapter of this work, while the samples presentation, the experimental procedures, and the description of the apparatus together with the computational details are briefly specified in the third chapter. The fourth chapter investigates the concentration dependent wavenumber shifts and linewidth changes of tetrahydrofuran in a binary system. Many of the applications in food science rely heavily on Raman spectroscopy, often preceding the biomedical applications. The characterization and identification of food additives using Raman, surface-enhanced Raman spectroscopy, and theoretical calculations is in detail depicted in the fifth chapter, whereas in the sixth and seventh chapters the monitoring of several medicines and various lanthanide complexes with anticancer properties, respectively, employing IR and Raman techniques are treated. These last two chapters address applications of vibrational spectroscopy to pharmaceutical products, and include the use of vibrational spectroscopy in combinatorial chemistry and density functional theory, a modality increasingly used by the pharmaceutical industry for the discovery if new pharmacologically active substances.}, subject = {Schwingungsspektroskopie}, language = {en} } @phdthesis{Pavel2003, author = {Pavel, Ioana-Emilia}, title = {Vibrational spectroscopy and density functional theory calculations, a powerful approach for the characterization of pharmaceuticals and new organometallic complexes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-7186}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2003}, abstract = {In the current work, several well-known pharmaceuticals (1,4-dihydrazinophthalazine sulfate, caffeine, and papaverine hydrochloride) and new organometallic compounds (nickel(II) cupferronato complexes NiL2An, L = PhN2O2-, n = 1, A = o-phenanthroline (1), o,o'-bipyridine (2) and n = 2, A = H2O (3), o-NH2Py (4), o-C6H4(NH2)2 (5); silylene-bridged dinuclear iron complexes [Cp(OC)2Fe]2SiX2 (X = H (6), F (7), Cl (8), Br (9), I (10)); 3-silaoxetane 3,3-dimethyl-2,2,4,4-tetraphenyl-1-oxa-3-silacyclobutane (11) and 3-silathietane 3,3-dimethyl-2,2,4,4-tetraphenyl-1-sila-3-thiacyclobutane (12) compounds), which have successfully been characterized by using vibrational spectroscopy in conjunction with accurate density functional theory (DFT) calculations, are presented. The DFT computed molecular geometries of the species of interest reproduced the crystal structure data very well and in conjunction with IR and Raman measurements helped us to clarify the structures of the compounds, for which no experimental data were available; and this, especially for the new organometallic compounds, where the X-Ray analysis was limited by the non-availability of single crystals (3, 5, 10). Furthermore, a natural population analysis (NPA) and natural bond orbital (NBO) calculations together with a detailed analysis of the IR and Raman experimental as well as calculated spectra of the new organometallic compounds, allowed us to study some special bonding situations (1-12) or to monitor the structural changes observed with the change in temperature during the Raman experiments (11, 12). By combining these two methods (DFT and vibrational spectroscopy), the auspicious results obtained on the organometallic compounds 6-12 and overall in literature, made us confident of the power of theoretical calculations in aiding the interpretation of rich SERS spectra by solving some interesting issues. Consequently, the Raman and SERS spectra of well-known pharmaceuticals (1,4-dihydrazinophthalazine sulfate, caffeine, and papaverine hydrochloride) or new potentially biological active organometallic complexes (1-5), that were synthetized by our coworkers, were discussed with the assistance of the accurate results obtained from DFT calculations (structural parameters, harmonic vibrational wavenumbers, Raman scattering activities), and many previous incomplete assignments have been analyzed and improved. This allowed us to establish the vibrational behavior of these biological compounds near a biological artificial model at different pH values or concentrations (Ag substrate), taking into account that information about the species present under particular conditions could be of great importance for the interpretation of biochemical processes. The total electron density of molecules and the partial charges situated on selected atoms, which were determined theoretically by NPA, allowed us to establish the probability of different atoms acting as an adsorptive site for the metal surface. Moreover, a closer examination of the calculated orbitals of molecules brought further arguments on the presence or absence of the photoproducts at the Ag surface during the irradiation (1,4-dihydrazinophthalazine sulfate). Overall, the results provide a benchmark illustration of the virtues of DFT in aiding the interpretation of rich vibrational spectra attainable for larger polyatomic adsorbates by using SERS, as well as in furnishing detailed insight into the relation between the vibrational properties and the nature of the Ag substrate-adsorbate bonding. Therefore, we strongly believe that theoretical calculations will become a matter of rapidly growing scientific and practical interest in SERS.}, subject = {Arzneimittel}, language = {en} }