@phdthesis{Luebtow2020, author = {L{\"u}btow, Michael M.}, title = {Structure-property relationships in poly(2-oxazoline)/poly(2-oxazine) based drug formulations}, doi = {10.25972/OPUS-19338}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-193387}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {According to estimates, more than 40\% of all new chemical entities developed in pharmaceutical industry are practically insoluble in water. Naturally, the demand for excipients which increase the water solubility and thus, the bioavailability of such hydrophobic drugs is enormous. Poly(2-oxazoline)s (POx) are currently intensively discussed as highly versatile class of biomaterials. Although selected POx based micellar drug formulations exhibit extraordinarily high drug loadings > 50 wt.\% enabling high anti-tumor efficacies in vivo, the formulation of other hydrophobic compounds has failed. This casts doubt on the general understanding in which a hydrophobic active pharmaceutical ingredient is dissolved rather unspecifically in the hydrophobic core of the micelles following the fundamental concept of "like dissolves like". Therefore, a closer look at the interactions between all components within a formulation becomes increasingly important. To do so, a large vehicle platform was synthesized, loaded with various hydrophobic drugs of different structure, and the formulations subsequently characterized with conventional and less conventional techniques. The obtained in-depth insights helped to develop a more thorough understanding about the interaction of polymer and incorporated API finally revealing morphologies deviating from a classical core/shell structure. During these studies, the scarcely investigated polymer class of poly(2-oxazine)s (POzi) was found as promising drug-delivery vehicle for hydrophobic drugs. Apart from this fundamental research, the anti-tumor efficacy of the two APIs curcumin and atorvastatin has been studied in more detail. To increase the scope of POx and POzi based formulations designed for intravenous administration, a curcumin loaded hydrogel was developed as injectable drug-depot.}, subject = {Polymere}, language = {en} } @phdthesis{Haider2022, author = {Haider, Malik Salman}, title = {Structure Property Relationship and Therapeutic Potential of Poly(2-oxazoline)s and Poly(2-oxazines)s based Amphiphiles}, doi = {10.25972/OPUS-28903}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-289036}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {In the past decade, poly(2-oxazoline)s (POx) and very recently poly(2-oxazine)s (POzi) based amphiphiles have shown great potential for medical applications. Therefore, the major aim of this thesis was to further explore the pharmaceutical and biomedical applications of POx/POzi based ABA triblock and AB diblock copolymers, respectively with the special emphasis on structure property relationship (SPR). ABA triblock copolymers (with shorter side chain length in the hydrophobic block) have shown high solubilizing capacity for hydrophobic drugs. The issue of poor aqueous solubility was initially addressed by developing a (micellar) formulation library of 21 highly diverse, hydrophobic drugs with POx/POzi based ABA triblock copolymers. Theoretically, the extent of compatibility between polymers and drug was determined by calculating solubility parameters (SPs). The SPs were thoroughly investigated to check their applicability in present systems. The selected formulations were further characterized by various physico-chemical techniques. For the biomedical applications, a novel thermoresposive diblock copolymer was synthesized which has shown promising properties to be used as hydrogel bioink or can potentially be used as fugitive support material. The most important aspect i.e. SPR, was studied with respect to hydrophilic block in either tri- or di-block copolymers. In triblock copolymer, the hydrophilic block played an important role for ultra high drug loading, while in case of diblock, it has improved the printability of the hydrogels. Apart from the basic research, the therapeutic applications of two formulations i.e. mitotane (commercially available as tablet dosage form for adrenocortical carcinoma) and BT-44 (lead compound for nerve regeneration) were studied in more detail.}, language = {en} } @phdthesis{Hofmann2022, author = {Hofmann, Michael}, title = {Overcoming Obstacles in the Aqueous Processing of Nickel-rich Layered Oxide Cathode Materials}, doi = {10.25972/OPUS-27378}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-273787}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {The implementation of a water-based cathode manufacturing process is attractive, given the prospect of improved sustainability of future lithium-ion batteries. However, the sensitivity of many cathode materials to water poses a huge challenge. Within the scope of this work, a correlation between the water sensitivity of cathode materials from the class of layered oxides and their elemental composition was identified. In particular for the cathode material LiNi0.8Co0.15Al0.05O2 (NCA), the processes taking place in aqueous medium were clarified in detail. Based on this knowledge, the surface of NCA particles could be specifically modified, which led to a reduced water sensitivity. As a result, the electrochemical performance of cells with water-based NCA cathodes was significantly improved and a remarkable long-term cycling performance was achieved. The present work contributes to a deeper understanding of the water sensitivity of cathode materials and at the same time presents a promising approach to overcome this obstacle. Consequently, this work advances the successful widespread realization of water-based cathode manufacturing.}, subject = {Elektrochemie}, language = {en} } @article{GranathLoebmannMandel2021, author = {Granath, Tim and L{\"o}bmann, Peer and Mandel, Karl}, title = {Oxidative Precipitation as a Versatile Method to Obtain Ferromagnetic Fe\(_{3}\)O\(_{4}\) Nano- and Mesocrystals Adjustable in Morphology and Magnetic Properties}, series = {Particle \& Particle Systems Characterization}, volume = {38}, journal = {Particle \& Particle Systems Characterization}, number = {3}, doi = {10.1002/ppsc.202000307}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-224419}, year = {2021}, abstract = {Oxidative precipitation is a facile synthesis method to obtain ferromagnetic iron oxide nanoparticles from ferrous salts—with unexplored potential. The concentration of base and oxidant alone strongly affects the particle's structure and thus their magnetic properties despite the same material, magnetite (Fe\(_{3}\)O\(_{4}\)), is obtained when precipitated with potassium hydroxide (KOH) from ferrous sulfate (FeSO\(_{4}\)) and treated with potassium nitrate (KNO\(_{3}\)) at appropriate temperature. Depending on the potassium hydroxide and potassium nitrate concentrations, it is possible to obtain a series of different types of either single crystals or mesocrystals. The time-dependent mesocrystal evolution can be revealed via electron microscopy and provides insights into the process of oriented attachment, yielding faceted particles, showing a facet-dependent reactivity. It is found that it is the nitrate and hydroxide concentration that influences the ligand exchange process and thus the crystallization pathways. The presence of sulfate ions contributes to the mesocrystal evolution as well, as sulfate apparently hinders further crystal fusion, as revealed via infrared spectroscopy. Finally, it is found that nitrite, as one possible and ecologically highly relevant reduction product occurring in nature in context with iron, only evolves if the reaction is quantitative.}, language = {en} } @article{SchneiderTschoepeHanselmannetal.2020, author = {Schneider, Michael and Tsch{\"o}pe, Andr{\´e} and Hanselmann, Doris and Ballweg, Thomas and Gellermann, Carsten and Franzreb, Matthias and Mandel, Karl}, title = {Adsorber Particles with Magnetically-Supported Improved Electrochemical Conversion Behavior for Waste Water Treatment Processes}, series = {Particle \& Particle Systems Characterization}, volume = {37}, journal = {Particle \& Particle Systems Characterization}, number = {2}, doi = {10.1002/ppsc.201900487}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-214738}, year = {2020}, abstract = {Micron-sized supraparticles, consisting of a plurality of discrete nano- and microscale functional units, are assembled and fused by means of a droplet extrusion process. By combining nano magnetite, activated carbon, and conductive carbon with a polymeric binder matrix, particles are obtained which unite good magnetic properties, electrical conductivity, and adsorber activity through the high accessible surface area of the incorporated activated carbon of about 570 m\(^{2}\) g\(^{-1}\), thereby enabling a new approach toward sustainable water treatment processes. Due to the interplay of the components, it is possible to adsorb target substances, dissolved in the water which is demonstrated by the adsorption of the model dye methylene blue. A very fast adsorption kinetic and an adsorption capacity of about 400 mg g\(^{-1}\) is determined. By using the developed composite particles, it is also possible to electrochemically alter substances flowing through a magnetically-stabilized fluidized-bed reactor by electrochemically charging/discharging, significantly supported by the magnetic field enabling alternatingly optimum mobility/adsorption phases with contact/charging intervals. The electrochemical conversion can be increased up to 151\% depending on the applied flow-rate and electrical voltage. By applying an external magnetic field, a further increase of electrochemical conversion of up to 70\% can be observed.}, language = {en} } @article{StrasserSchrauthDembskietal.2017, author = {Straßer, Marion and Schrauth, Joachim H. X. and Dembski, Sofia and Haddad, Daniel and Ahrens, Bernd and Schweizer, Stefan and Christ, Bastian and Cubukova, Alevtina and Metzger, Marco and Walles, Heike and Jakob, Peter M. and Sextl, Gerhard}, title = {Calcium fluoride based multifunctional nanoparticles for multimodal imaging}, series = {Beilstein Journal of Nanotechnology}, volume = {8}, journal = {Beilstein Journal of Nanotechnology}, doi = {10.3762/bjnano.8.148}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-170657}, pages = {1484-1493}, year = {2017}, abstract = {New multifunctional nanoparticles (NPs) that can be used as contrast agents (CA) in different imaging techniques, such as photoluminescence (PL) microscopy and magnetic resonance imaging (MRI), open new possibilities for medical imaging, e.g., in the fields of diagnostics or tissue characterization in regenerative medicine. The focus of this study is on the synthesis and characterization of CaF\(_{2}\):(Tb\(^{3+}\),Gd\(^{3+}\)) NPs. Fabricated in a wet-chemical procedure, the spherical NPs with a diameter of 5-10 nm show a crystalline structure. Simultaneous doping of the NPs with different lanthanide ions, leading to paramagnetism and fluorescence, makes them suitable for MR and PL imaging. Owing to the Gd\(^{3+}\) ions on the surface, the NPs reduce the MR T\(_{1}\) relaxation time constant as a function of their concentration. Thus, the NPs can be used as a MRI CA with a mean relaxivity of about r = 0.471 mL·mg\(^{-1}\)·s\(^{-1}\). Repeated MRI examinations of four different batches prove the reproducibility of the NP synthesis and determine the long-term stability of the CAs. No cytotoxicity of NP concentrations between 0.5 and 1 mg·mL\(^{-1}\) was observed after exposure to human dermal fibroblasts over 24 h. Overall this study shows, that the CaF\(_{2}\):(Tb\(^{3+}\),Gd\(^{3+}\)) NPs are suitable for medical imaging.}, language = {en} } @article{BelkaNickelKurth2019, author = {Belka, Janina and Nickel, Joachim and Kurth, Dirk G.}, title = {Growth on metallo-supramolecular coordination polyelectrolyte (MEPE) stimulates osteogenic differentiation of human osteosarcoma cells (MG63) and human bone marrow derived mesenchymal stem cells}, series = {Polymers}, volume = {11}, journal = {Polymers}, number = {7}, issn = {2073-4360}, doi = {10.3390/polym11071090}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-197264}, pages = {1090}, year = {2019}, abstract = {Background: Culturing of cells is typically performed on standard tissue culture plates generating growth conditions, which in general do not reflect the native three-dimensional cellular environment. Recent investigations provide insights in parameters, which strongly affect the general cellular behavior triggering essential processes such as cell differentiation. The physical properties of the used material, such as stiffness, roughness, or topology, as well as the chemical composition of the cell-surface interface are shown to play a key role in the initiation of particular cellular responses. Methods: We extended our previous research, which identified thin films of metallo-supramolecular coordination polyelectrolytes (MEPEs) as substrate to trigger the differentiation of muscular precursor cells. Results: Here, we show that the same MEPEs similarly stimulate the osteogenic differentiation of pre-osteoblasts. Remarkably, MEPE modified surfaces also trigger the differentiation of primary bone derived mesenchymal stem cells (BMSCs) towards the osteogenic lineage. Conclusion: This result leads to the conclusion that these surfaces individually support the specification of cell differentiation toward lineages that correspond to the natural commitment of the particular cell types. We, therefore, propose that Fe-MEPEs may be used as scaffold for the treatment of defects at least in muscular or bone tissue.}, language = {en} } @article{PetschkeHelmStaab2019, author = {Petschke, Danny and Helm, Ricardo and Staab, Torsten E.M.}, title = {Data on pure tin by Positron Annihilation Lifetime Spectroscopy (PALS) acquired with a semi-analog/digital setup using DDRS4PALS}, series = {Data in Brief}, volume = {22}, journal = {Data in Brief}, doi = {10.1016/j.dib.2018.11.121}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-177698}, pages = {16-29}, year = {2019}, abstract = {Positron annihilation lifetime spectroscopy (PALS) provides a powerful technique for non-destructive microstructure investigations in a broad field of material classes such as metals, semiconductors, polymers or porous glasses. Even though this method is well established for more than five decades, no proper standardization for the used setup configuration and subsequent data processing exists. Eventually, this could lead to an insufficiency of data reproducibility and avoidable deviations. Here we present experimentally obtained and simulated data of positron lifetime spectra at various statistics measured on pure tin (4N-Sn) by using a semi-analog/digital setup, where the digital section consists of the DRS4 evaluation board, "Design and performance of the 6 GHz waveform digitizing chip DRS4" [1]. The analog section consists of nuclear instrument modules (NIM), which externally trigger the DRS4 evaluation board to reduce the digitization and, thus, increase the acquisition efficiency. For the experimentally obtained lifetime spectra, 22Na sealed in Kapton foil served as a positron source, whereas 60Co was used for the acquisition of the prompt spectrum, i.e. the quasi instrument response function. Both types of measurements were carried out under the same conditions. All necessary data and information regarding the data acquisition and data reduction are provided to allow reproducibility by other research groups.}, language = {en} } @article{HahnLuxenhoferHeltenetal.2021, author = {Hahn, Lukas and Luxenhofer, Robert and Helten, Holger and Forster, Stefan and Fritze, Lars and Polzin, Lando and Keßler, Larissa}, title = {ABA Type Amphiphiles with Poly(2-benzhydryl-2-oxazine) Moieties: Synthesis, Characterization and Inverse Thermogelation}, series = {Macromolecular Chemistry and Physics}, volume = {222}, journal = {Macromolecular Chemistry and Physics}, number = {17}, doi = {10.1002/macp.202100114}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-265124}, year = {2021}, abstract = {Thermoresponsive polymers are frequently involved in the development of materials for various applications. Here, polymers containing poly(2- benzhydryl-2-oxazine) (pBhOzi) repeating units are described for the first time. The homopolymer pBhOzi and an ABA type amphiphile comprising two flanking hydrophilic A blocks of poly(2-methyl-2-oxazoline) (pMeOx) and the hydrophobic aromatic pBhOzi central B block (pMeOx-b-pBhOzi-b-pMeOx) are synthesized and the latter is shown to exhibit inverse thermogelling properties at concentrations of 20 wt.\% in water. This behavior stands in contrast to a homologue ABA amphiphile consisting of a central poly(2-benzhydryl-2-oxazoline) block (pMeOx-b-pBhOx-b-pMeOx). No inverse thermogelling is observed with this polymer even at 25 wt.\%. For 25 wt.\% pMeOx-b-pBhOzi-b-pMeOx, a surprisingly high storage modulus of ≈22 kPa and high values for the yield and flow points of 480 Pa and 1.3 kPa are obtained. Exceeding the yield point, pronounced shear thinning is observed. Interestingly, only little difference between self-assemblies of pMeOx-b-pBhOzi-b-pMeOx and pMeOx-b-pBhOx-b-pMeOx is observed by dynamic light scattering while transmission electron microscopy images suggest that the micelles of pMeOx-b-pBhOzi-b-pMeOx interact through their hydrophilic coronas, which is probably decisive for the gel formation. Overall, this study introduces new building blocks for poly(2-oxazoline) and poly(2-oxazine)-based self-assemblies, but additional studies will be needed to unravel the exact mechanism.}, language = {en} } @article{LuebtowMarciniakSchmiedeletal.2019, author = {L{\"u}btow, Michael M. and Marciniak, Henning and Schmiedel, Alexander and Roos, Markus and Lambert, Christoph and Luxenhofer, Robert}, title = {Ultra-high to ultra-low drug loaded micelles: Probing host-guest interactions by fluorescence spectroscopy}, series = {Chemistry - A European Journal}, volume = {25}, journal = {Chemistry - A European Journal}, number = {54}, doi = {10.1002/chem.201902619}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-206128}, pages = {12601-12610}, year = {2019}, abstract = {Polymer micelles are an attractive means to solubilize water insoluble compounds such as drugs. Drug loading, formulations stability and control over drug release are crucial factors for drug-loaded polymer micelles. The interactions between the polymeric host and the guest molecules are considered critical to control these factors but typically barely understood. Here, we compare two isomeric polymer micelles, one of which enables ultra-high curcumin loading exceeding 50 wt.\%, while the other allows a drug loading of only 25 wt.\%. In the low capacity micelles, steady-state fluorescence revealed a very unusual feature of curcumin fluorescence, a high energy emission at 510 nm. Time-resolved fluorescence upconversion showed that the fluorescence life time of the corresponding species is too short in the high-capacity micelles, preventing an observable emission in steady-state. Therefore, contrary to common perception, stronger interactions between host and guest can be detrimental to the drug loading in polymer micelles.}, subject = {Polymer-drug interaction}, language = {en} } @article{ZahoranovaLuxenhofer2021, author = {Zahoranov{\´a}, Anna and Luxenhofer, Robert}, title = {Poly(2-oxazoline)- and Poly(2-oxazine)-Based Self-Assemblies, Polyplexes, and Drug Nanoformulations—An Update}, series = {Advanced Healthcare Materials}, volume = {10}, journal = {Advanced Healthcare Materials}, number = {6}, doi = {10.1002/adhm.202001382}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-225833}, year = {2021}, abstract = {For many decades, poly(2-oxazoline)s and poly(2-oxazine)s, two closely related families of polymers, have led the life of a rather obscure research topic with only a few research groups world-wide working with them. This has changed in the last five to ten years, presumably triggered significantly by very promising clinical trials of the first poly(2-oxazoline)-based drug conjugate. The huge chemical and structural toolbox poly(2-oxazoline)s and poly(2-oxazine)s has been extended very significantly in the last few years, but their potential still remains largely untapped. Here, specifically, the developments in macromolecular self-assemblies and non-covalent drug delivery systems such as polyplexes and drug nanoformulations based on poly(2-oxazoline)s and poly(2-oxazine)s are reviewed. This highly dynamic field benefits particularly from the extensive synthetic toolbox poly(2-oxazoline)s and poly(2-oxazine)s offer and also may have the largest potential for a further development. It is expected that the research dynamics will remain high in the next few years, particularly as more about the safety and therapeutic potential of poly(2-oxazoline)s and poly(2-oxazine)s is learned.}, language = {en} } @article{ChristGlaubittBerberichetal.2022, author = {Christ, Bastian and Glaubitt, Walther and Berberich, Katrin and Weigel, Tobias and Probst, J{\"o}rn and Sextl, Gerhard and Dembski, Sofia}, title = {Sol-gel-derived fibers based on amorphous α-hydroxy-carboxylate-modified titanium(IV) oxide as a 3-dimensional scaffold}, series = {Materials}, volume = {15}, journal = {Materials}, number = {8}, issn = {1996-1944}, doi = {10.3390/ma15082752}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-270694}, year = {2022}, abstract = {The development of novel fibrous biomaterials and further processing of medical devices is still challenging. For instance, titanium(IV) oxide is a well-established biocompatible material, and the synthesis of TiO\(_x\) particles and coatings via the sol-gel process has frequently been published. However, synthesis protocols of sol-gel-derived TiO\(_x\) fibers are hardly known. In this publication, the authors present a synthesis and fabrication of purely sol-gel-derived TiO\(_x\) fiber fleeces starting from the liquid sol-gel precursor titanium ethylate (TEOT). Here, the α-hydroxy-carboxylic acid lactic acid (LA) was used as a chelating ligand to reduce the reactivity towards hydrolysis of TEOT enabling a spinnable sol. The resulting fibers were processed into a non-woven fleece, characterized with FTIR, \(^{13}\)C-MAS-NMR, XRD, and screened with regard to their stability in physiological solution. They revealed an unexpected dependency between the LA content and the dissolution behavior. Finally, in vitro cell culture experiments proved their potential suitability as an open-mesh structured scaffold material, even for challenging applications such as therapeutic medicinal products (ATMPs).}, language = {en} } @phdthesis{Emmert2023, author = {Emmert, Martin}, title = {The Influence of Substrate Micro- and Nanotopographies on Essential Cell Functions}, doi = {10.25972/OPUS-32779}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-327796}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {The introduction of novel bioactive materials to manipulate living cell behavior is a crucial topic for biomedical research and tissue engineering. Biomaterials or surface patterns that boost specific cell functions can enable innovative new products in cell culture and diagnostics. This study aims at investigating the interaction of living cells with microstructured, nanostructured and nanoporous material surfaces in order to identify distinct systematics in cell-material interplay. For this purpose, three different studies were carried out and yielded individual effects on different cell functions. Cell migration processes are controlled by sensitive interaction with external cues such as topographic structures of the cell's environment. The first part of this study presents systematically controlled assays to investigate the effects of spatial density and local geometry of micron scale topographic cues on amoeboid migration of Dictyostelium discoideum cells in quasi-3D pillar fields with systematic variation of inter-pillar distance and pillar lattice geometry. We can extract motility parameters in order to elucidate the details of amoeboid migration mechanisms and consolidate them in a two-state contact-controlled motility model, distinguishing directed and random phases. Specifically, we find that directed pillar-to-pillar runs are found preferably in high pillar density regions, and cells in directed motion states sense pillars as attractive topographic stimuli. In contrast, cell motion in random probing states is inhibited by high pillar density, where pillars act as obstacles for cell motion. In a gradient spatial density, these mechanisms lead to topographic guidance of cells, with a general trend towards a regime of inter-pillar spacing close to the cell diameter. In locally anisotropic pillar environments, cell migration is often found to be damped due to competing attraction by different pillars in close proximity and due to lack of other potential stimuli in the vicinity of the cell. Further, we demonstrate topographic cell guidance reflecting the lattice geometry of the quasi-3D environment by distinct preferences in migration direction. We further investigate amoeboid single-cell migration on intrinsically nano-structured, biodegradable silica fibers in comparison to chemically equivalent plain glass surfaces. Cell migration trajectories are classified into directed runs and quasi-random migration by a local mean squared displacement (LMSD) analysis. We find that directed movement on silica fibers is enhanced in a significant manner by the fibers' nanoscale surface-patterns. Further, cell adhesion on the silica fibers is a microtubule-mediated process. Cells lacking microtubules detach from the fibers, but adhere well to glass surfaces. Knock-out mutants of myosin II migrating on the fibers are as active as cells with active myosin II, while the migration of the knock-out mutants is hindered on plain glass. We investigate the influence of the intrinsically nano-patterned surface of nanoporous glass membranes on the behavior of mammalian cells. Three different cell lines and primary human mesenchymal stem cells (hMSCs) proliferate readily on nanoporous glass membranes with mean pore sizes between 10 nm and 124 nm. In both proliferation and mRNA expression experiments, L929 fibroblasts show a distinct trend towards mean pore sizes > 80 nm. For primary hMSCs, excellent proliferation is observed on all nanoporous surfaces. hMSC on samples with 17 nm pore size display increased expression of COL10, COL2A1 and SOX9, especially during the first two weeks of culture. In upside down culture, SK MEL-28 cells on nanoporous glass resist the gravitational force and proliferate well in contrast to cells on flat references. The effect of paclitaxel treatment of MDA MB 321 breast cancer cells is already visible after 48 h on nanoporous membranes and strongly pronounced in comparison to reference samples. The studies presented in this work showed novel and distinct effects of micro- and nanoscale topographies on the behavior of various types of living cells. These examples display how versatile the potential for applications of bioactive materials could become in the next years and decades. And yet this variety of different alterations of cell functions due to topographic cues also shows the crucial part of this field of research: Carving out distinct, robust correlations of external cues and cell behavior is of utmost importance to derive definitive design implications that can lead to scientifically, clinically and commercially successful products.}, language = {en} } @phdthesis{Daubinger2024, author = {Daubinger, Philip}, title = {Electrochemical and Mechanical Interplay of State-of-the-Art and Next-Generation Lithium-Ion Batteries}, doi = {10.25972/OPUS-35125}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-351253}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2024}, abstract = {The demand for LIB with enhanced energy densities leads to increased utilization of the space within the confinements of the battery housing or to the use of electrode material with increased intrinsic specific energy densities. Both requirements result in more stress on the battery electrodes and separator during cycling or aging. However, the effect of mechanical strain on the cell's electrochemistry and thus the performance of batteries is rather unexplored compared to the impact of current or temperature, for example. The objective of this thesis was to give a better understanding of the electrochemical and mechanical interplay in current- and next-generation lithium based battery cells. Therefore, the thesis was structured into the investigations on SoA and next-generation LIBs. For SoA LIBs, the investigations of the interplay started at laboratory scale. Here, the expansion of various electrodes and also the impact of mechanical pressure and its distribution on the performance of the cells were studied. The investigations at laboratory scale was followed by an examination of the electrochemical and mechanical interactions on large format commercial LIBs which are used in BEVs. Accordingly, the effect of bracing and its effect on the performance was studied in an aging and post-mortem study. To gain a deeper understanding of the mechanical changes in LIBs, an ultrasonic study was performed for pouch cells. Here, the mechanical changes were further investigated in dependence of SoC and SoH. The effects of the mechanical stress on the performance for next-generation batteries were studied at laboratory scale. In the beginning, the expansion of next-generation anode materials such as silicon and lithium was compared with today's anode materials. Furthermore, the effect of mechanical pressure and electrolyte on the irreversible dilation and performance was investigated for lithium metal cells. Overall, it was shown that pressure has a significant effect on the performance of today's and also future LIBs. The interplay of the electrochemical and mechanical effects inside a LIB has a considerable impact on the lifetime, capacity fading and impedance increase of the batteries.}, subject = {Lithium-Ionen-Akkumulator}, language = {en} } @phdthesis{SpaethgebLutz2024, author = {Sp{\"a}th [geb. Lutz], Johanna}, title = {Oberfl{\"a}chenfunktionalisierte Gold- und Silbernanopartikel auf Basis von Thioether-Poly(glycidol) f{\"u}r potenzielle biomedizinische Anwendungen - Auswirkungen auf Stabilit{\"a}t, Proteinkoronabildung und Biodistribution}, doi = {10.25972/OPUS-35066}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-350662}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2024}, abstract = {Based on previous results showing that thioether modification of gold nanoparticles (AuNPs), especially coating with a multivalent system, yielded in excellent colloidal stability, the first aim of this thesis was to prove whether functionalization of silver nanoparticles (AgNPs) with thioether also has a comparable or even enhanced stabilization efficacy compared with the gold standard of coating with thiols and, particularly, whether the multivalency of polymers leads to stable AgNPs conjugates. Herein, AgNPs coated with mono- and multivalent thiol- and thioether polymers were prepared to systematically investigate the adsorption kinetics onto the silver surface as well as the colloidal stability after exposure to different conditions relevant for biomedical application. Although the thioether-polymers showed a slower immobilization onto AgNPs, same or mostly even better stabilization was exhibited than for the thiol analogs. As multivalent thioether-poly(glycidol) (PG) is already proven as a promising candidate for AuNP modification and stabilization, the second aim of this thesis was to examine the stealth behavior of thioether-PG, side-chain functionalized with various hydrophobic (alkyl and cholesteryl) units, to gain a deeper understanding of AuNP surface functionalization in terms of protein adsorption and their subsequent cellular uptake by human monocyte-derived macrophages. For this purpose, citrate-stabilized AuNPs were modified with the amphiphilic polymers by ligand exchange reaction, followed by incubation in human serum. The various surface amphiphilicities affected protein adsorption to a certain extent, with less hydrophobic particle layers leading to a more inhibited protein binding. Especially AuNPs functionalized with PG carrying the longest alkyl chain showed differences in the protein corona composition compared to the other polymer-coated NPs. In addition, PGylation, and especially prior serum incubation, of the NPs exhibited reduced macrophage internalization. As the use of mammals for in vivo experiments faces various challenges including increasing regulatory hurdles and costs, the third aim of this thesis was to validate larvae of the domestic silkworm Bombyx mori as an alternative invertebrate model for preliminary in vivo research, using AuNPs with various surface chemistry (one PEG-based modification and three PG-coatings with slightly hydrophobic functionalization, as well as positively and negatively charges) for studying their biodistribution and elimination. 6 h and 24 h after intra-hemolymph injection the Au content in different organ compartments was measured with ICP-MS, showing that positively charged particles appeared to be eliminated most rapidly through the midgut, while AuNPs modified with PEG, alkyl-functionalized PG and negatively charged PG exhibited long-term bioavailability in the silkworm body.}, subject = {Nanopartikel}, language = {en} } @phdthesis{Wenderoth2024, author = {Wenderoth, Sarah}, title = {Synthesis and characterization of shear stress indicator supraparticles}, doi = {10.25972/OPUS-35281}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-352819}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2024}, abstract = {The detection of smallest mechanical loads plays an increasingly important role in many areas of advancing automation and manufacturing technology, but also in everyday life. In this doctoral thesis, various microparticle systems were developed that are able to indicate mechanical shear stress via simple mechanisms. Using a toolbox approach, these systems can be spray-dried from various nanoscale primary particles (silica and iron oxide) to micrometer-sized units, so-called supraparticles. By varying the different building blocks and in combination with different dyes, a new class of mechanochromic shear stress indicators was developed by constructing hierarchically structured core-shell supraparticles that can indicate mechanical stress via an easily detectable color change. Three different mechanisms can be distinguished. If a signal becomes visible only by a mechanical load, it is a turn-on indicator. In the opposite case, the turn-off indicator, the signal is switched off by a mechanical load. In the third mechanism, the color-change indicator, the color changes as a result of a mechanical load. In principle, these indicators can be used in two different ways. First, they can be incorporated into a coating as an additive. These coatings can be applied to a wide range of products, including food packaging, medical devices, and generally any sensitive surface where mechanical stress, such as scratches, is difficult to detect but can have serious consequences. Second, these shear stress indicators can also be used directly in powder form and for example then applied in 3D-printing or in ball mills. A total of six different shear stress indicators were developed, three of which were used as additives in coatings and three were applied in powder form. Depending on their composition, these indicators were readout by fluorescence, UV-Vis or Magnetic Particle Spectroscopy. The development of these novel shear stress indicator supraparticles were successfully combined molecular chemistry with the world of nano-objects to develop macroscopic systems that can enable smart and communicating materials to indicate mechanical stress in a variety of applications.}, subject = {Nanopartikel}, language = {en} }