TY - JOUR A1 - Andelovic, Kristina A1 - Winter, Patrick A1 - Kampf, Thomas A1 - Xu, Anton A1 - Jakob, Peter Michael A1 - Herold, Volker A1 - Bauer, Wolfgang Rudolf A1 - Zernecke, Alma T1 - 2D Projection Maps of WSS and OSI Reveal Distinct Spatiotemporal Changes in Hemodynamics in the Murine Aorta during Ageing and Atherosclerosis JF - Biomedicines N2 - Growth, ageing and atherosclerotic plaque development alter the biomechanical forces acting on the vessel wall. However, monitoring the detailed local changes in wall shear stress (WSS) at distinct sites of the murine aortic arch over time has been challenging. Here, we studied the temporal and spatial changes in flow, WSS, oscillatory shear index (OSI) and elastic properties of healthy wildtype (WT, n = 5) and atherosclerotic apolipoprotein E-deficient (Apoe\(^{−/−}\), n = 6) mice during ageing and atherosclerosis using high-resolution 4D flow magnetic resonance imaging (MRI). Spatially resolved 2D projection maps of WSS and OSI of the complete aortic arch were generated, allowing the pixel-wise statistical analysis of inter- and intragroup hemodynamic changes over time and local correlations between WSS, pulse wave velocity (PWV), plaque and vessel wall characteristics. The study revealed converse differences of local hemodynamic profiles in healthy WT and atherosclerotic Apoe\(^{−/−}\) mice, and we identified the circumferential WSS as potential marker of plaque size and composition in advanced atherosclerosis and the radial strain as a potential marker for vascular elasticity. Two-dimensional (2D) projection maps of WSS and OSI, including statistical analysis provide a powerful tool to monitor local aortic hemodynamics during ageing and atherosclerosis. The correlation of spatially resolved hemodynamics and plaque characteristics could significantly improve our understanding of the impact of hemodynamics on atherosclerosis, which may be key to understand plaque progression towards vulnerability. KW - atherosclerosis KW - mouse KW - 4D flow MRI KW - aortic arch KW - flow dynamics KW - WSS KW - mapping KW - PWV KW - plaque characteristics Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-252164 SN - 2227-9059 VL - 9 IS - 12 ER - TY - THES A1 - Wäldchen, Felix T1 - 3D Single Molecule Imaging In Whole Cells Enabled By Lattice Light-Sheet Illumination T1 - 3D Einzelmolekülbildgebung in ganzen Zellen ermöglicht durch Gitterlichtblattbeleuchtung N2 - Single molecule localization microscopy has seen a remarkable growth since its first experimental implementations about a decade ago. Despite its technical challenges, it is already widely used in medicine and biology and is valued as a unique tool to gain molecular information with high specificity. However, common illumination techniques do not allow the use of single molecule sensitive super-resolution microscopy techniques such as direct stochastic optical reconstruction microscopy (dSTORM) for whole cell imaging. In addition, they can potentially alter the quantitative information. In this thesis, I combine dSTORM imaging in three dimensions with lattice lightsheet illumination to gain quantitative molecular information from cells unperturbed by the illumination and cover slip effects. Lattice light-sheet illumination uses optical lattices for beam shaping to restrict the illumination to the detectable volume. I describe the theoretical background needed for both techniques and detail the experimental realization of the system as well as the software that I developed to efficiently evaluate the data. Eventually, I will present key datasets that demonstrate the capabilities of the developed microscope system with and without dSTORM. My main goal here was to use these techniques for imaging the neural cell adhesion molecule (NCAM, also known as CD56) in whole cells. NCAM is a plasma membrane receptor known to play a key role in biological processes such as memory and learning. Combining dSTORM and lattice light-sheet illumination enables the collection of quantitative data of the distribution of molecules across the whole plasma membrane, and shows an accumulation of NCAM at cell-cell interfaces. The low phototoxicity of lattice light-sheet illumination further allows for tracking individual NCAM dimers in living cells, showing a significant dependence of its mobility on the actin skeleton of the cell. N2 - Die Einzelmoleküllokalisationsmikroskopie hat seit der ersten experimentellen Umsetzung vor etwa 10 Jahren einen bemerkenswerten Aufschwung erfahren. Trotz des hohen technischen Anspruchs findet sie bereits weite Verbreitung in der Biologie und Medizin und wird als einzigartiges Werkzeug geschätzt, um molekulare Information mit hoher Spezifität zu erlangen. Dennoch erschweren die gebräuchlichen Beleuchtungsmethoden die Anwendung von Methoden der Einzelmoleküllokalisationsmikroskopie wie dSTORM (engl. direct stochastic optical reconstruction microscopy) auf das Volumen ganzer Zellen, denn hier kann die Beleuchtung selbst die quantitativen Daten beeinflussen. In dieser Arbeit kombiniere ich dreidimensionale dSTORM-Bildgebung mit Gitterlichtblattbeleuchtung (engl. lattice light-sheet illumination) um quantitative, molekulare Information ohne durch die Beleuchtung verursachte Störungen zu gewinnen. Die Gitterlichtblattbeleuchtung nutzt optische Gitter zur Strahlformung, um das beleuchtete Volumen auf das detektierbare Volumen zu beschränken. Ich stelle den nötigen, theoretischen Hintergrund für beide Methoden dar und beschreibe die experimentelle Umsetzung sowie die von mir zur effizienten Datenauswertung entwickelte Software. Schließlich präsentiere ich verschiedene Datensätze, die die Fähigkeiten des Systems mit und ohne dSTORM demonstrieren. Mein Hauptziel war hierbei, beide Methoden zu nutzen, um das neuronale Zelladhäsionsmolekül (NCAM, engl. neural cell adhesion molecule) in ganzen Zellen abzubilden. NCAM (auch bekannt als CD56) ist ein Rezeptor auf der Plasmembran, der für seine Schlüsselrolle im Zusammenhang mit biologischen Prozessen wie Lernen und Gedächtnis bekannt ist. Die Kombination von dSTORM und Gitterlichtblattbeleuchtung ermöglicht das sammeln quantitativer Daten der Verteilung über die komplette Plasmamembran, wobei sich eine Akkumulation an Zell-Zell Kontaktflächen zeigt. Die niedrige Photoschädigung der Gitterlichtblattbeleuchtung ermöglicht weiterhin das Verfolgen von einzelnen NCAM-Dimeren in lebenden Zellen. Dort zeigt sich eine signifikante Abhängigkeit ihrer Mobilität vom Aktinskelett der Zelle. KW - Einzelmolekülmikroskopie KW - Optik KW - Light-Sheet KW - Lattice Light-Sheet KW - dSTORM KW - Single Molecule Imaging KW - Localization Microscopy Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-207111 ER - TY - THES A1 - Kügel, Jens T1 - 3d-Übergangsmetallphthalocyanin-Moleküle auf Metalloberflächen: Der Einfluss der d-Orbitalbesetzung T1 - 3d transition metal phthalocyanine molecules on metal surfaces - influence of the d-level-occupation N2 - Im Rahmen dieser Dissertation wird die Untersuchung von 3d-Übergangsmetallphthalocyanin- Molekülen (ÜMPc) – quadratisch-planaren organischen Molekülen, welche im Zentrum ein 3d-Übergangsmetallion besitzen – auf metallischen Oberflächen vorgestellt. Der Fokus dieser Arbeit liegt dabei auf dem Einfluss der d-Orbitalbesetzung auf die magnetischen, elektronischen und strukturellen Eigenschaften der adsorbierten Moleküle, die mit Hilfe der Rastertunnelmikroskopie und -spektroskopie charakterisiert wurden. Die gewonnen Ergebnisse werden zum Teil mit theoretischen Berechnungen analysiert und interpretiert. Die erste Hälfte der experimentellen Auswertung behandelt die Untersuchung dieser Moleküle auf Ag(001) in Hinblick auf die Existenz einer magnetischen Wechselwirkung, bei der ein unkompensiertes magnetisches Moment des Moleküls durch die Substratelektronen abgeschirmt wird. Dieser Effekt wird als Kondo-Abschirmung bezeichnet und erzeugt in der Zustandsdichte des Moleküls eine Resonanz am Fermi-Niveau. Die Messungen zeigen, dass diese Resonanz ausschließlich am Zentralion von MnPc vorgefunden wird, wohingegen sie bei allen anderen 3d-Übergangsmetallphthalocyanin-Molekülen, die eine höhere d-Orbitalbesetzung besitzen, nicht vorhanden ist. Anhand theoretischer Berechnungen kann die Ursache für dieses Verhalten darauf zurückgeführt werden, dass von allen d-Orbitalen einzig das dz2-Orbital mit dem Substrat geeignet hybridisiert, um eine Kondo-Abschirmung zu erzeugen. Da ausschließlich MnPc einen unkompensierten Spin in diesem Orbital besitzt, kann die An- bzw. Abwesenheit des Kondo-Effekts auf die unterschiedliche Besetzung des dz2-Orbitals zurückgeführt werden. Neben der eben erwähnten Kondo-Resonanz ist bei MnPc ein weiteres Merkmal am Fermi- Niveau überlagert. Durch die Analyse der räumlichen Verteilung, den Vergleich mit anderen Molekülen und der Manipulation des MnPc-Moleküls kann gezeigt werden, dass es sich bei diesem Merkmal um einen d-Orbitalzustand handelt. Die Manipulation des Moleküls durch gezieltes Entfernen von Wasserstoffatomen ermöglicht darüber hinaus die Stärke der Kondo-Abschirmung zu beeinflussen. In der zweiten Hälfte der experimentellen Auswertung werden Moleküle auf bismutinduzierten Oberflächenlegierungen der Edelmetalle Cu(111) und Ag(111) untersucht. Diese Legierungen zeichnen sich durch einen ausgeprägten Rashba-Effekt aus, der durch eine Aufspaltung der Parabeldispersion und Aufhebung der Spin-Entartung im zweidimensionalen Elektronengas der Oberflächenlegierung charakterisiert ist. Das Wachstumsverhalten von CuPc und MnPc auf diesen Oberflächen zeigt ein sehr gegensätzliches Verhalten. Während bei MnPc die Substrat-Molekül-Wechselwirkung dominant ist, wodurch diese Moleküle immer einen festen Adsorptionsplatz auf der Oberfläche besitzen, ist diese Wechselwirkung bei CuPc schwach ausgeprägt. Aus diesem Grund wandern die CuPc-Moleküle zu den Stufenkanten und bilden Cluster. Das unterschiedliche Wachstumsverhalten der Moleküle lässt sich auf die partiell-gefüllten d-Orbitale von MnPc zurückführen, die aus der Molekülebene ragen, mit dem Substrat hybridisieren und damit das Molekül an das Substrat binden. Bei CuPc hingegen sind diese d-Orbitale gefüllt und die Hybridisierung kann nicht stattfinden. Im letzten Abschnitt werden die elektronischen und magnetischen Eigenschaften von MnPc auf diesen Substraten behandelt, die einige Besonderheiten aufweisen. So bildet sich durch die Adsorption des Moleküls auf den Oberflächen eine Grenzschichtresonanz aus, die eine partielle Füllung erkennen lässt. Spektroskopiedaten, aufgenommen am Ort der Grenzschichtresonanz, weisen eine symmetrisch um das Fermi-Niveau aufgespaltene Resonanz auf. Die Intensität der unter- und oberhalb der Fermi-Energie befindlichen Resonanz zeigen dabei ein komplementäres Verhalten bzgl. der jeweiligen Lage auf der Grenzschichtresonanz: An den Orten, an denen die Resonanz unterhalb des Fermi-Niveaus ihre maximale Intensität besitzt, ist die Resonanz oberhalb des Fermi-Niveaus nicht vorhanden und umgekehrt. Diese experimentellen Beobachtungen werden mit einem Modellansatz erklärt, welcher die Wirkung eines effektiven Magnetfeldes und eine Spin-Filterung postuliert. N2 - In the framework of this thesis, the investigation of 3d-transition metal phthalocyanine molecules (TM Pc) on metallic surfaces is presented. These molecules possess a square planar structure with a 3d transition metal ion in their center. The main focus of this work concentrates on the influence of the d-level-occupation on the magnetic, electronic and structural properties of the molecules, which are characterized by scanning tunneling microscopy and spectroscopy. The achieved results are partly analyzed and interpreted by theoretical calculations. The first half of this thesis deals with the investigation of TMPc molecules on Ag(001) and the existence of the so-called Kondo effect. This magnetic interaction, which is caused by the screening of an uncompensated magnetic moment of the molecule by the conduction electrons of the substrate, creates a resonance in the density of states close to the Fermi level. The results show, that this resonance is only present at the central metal ion of MnPc, whereas it is absent in the case of all the other 3d transition metal phthalocyanine molecules with a higher d-level occupation. Theoretical calculations indicate that the origin of this behavior can be explained by the fact that out of five d-orbitals only the dz2-orbital can sufficiently hybridize with the substrate to form a Kondo screening channel. As MnPc is the only molecule with an uncompensated spin in this orbital, the presence and absence of a Kondo resonance can be explained by the different occupation of the dz2-orbital. Besides the aforementioned Kondo resonance, another superimposed feature close to the Fermi energy was observed for MnPc. By analyzing the spatial distribution of the features, by comparing the spectroscopy curves of different molecules and by manipulating the MnPc molecule, this feature can be assigned to a d-orbital state. With the manipulation of the MnPc, which was achieved by removing hydrogen atoms of the molecule, the strength of the Kondo screening can be tuned. The second half of the experimental analysis deals with the molecular investigation on bismuth–induced surface alloys of the noble metal crystals Cu(111) and Ag(111). These surface alloys exhibit a pronounced Rashba effect, which splits the parabolic dispersion and lifts the spin degeneracy of the two-dimensional electron gas. On these surfaces, the growth behavior of CuPc and MnPc is very different. While the substrate-molecule–interaction dominates in the case of MnPc, leading to a specific and robust adsorption site of the molecule, this interaction is only weakly present in the case of CuPc. As a result, the CuPc molecules are able to move to the step edges and form clusters. This difference can be attributed to the partial filling of the d-orbitals in the case of MnPc, which protrude out of the molecular plane, hybridize with the substrate and bind the molecule to the substrate. Contrary, in the case of CuPc these orbitals are completely filled, which prevents the hybridization between the d-orbital and the substrate. In the last section, the electronic and magnetic properties of MnPc will be presented, which show some peculiar features. Due to adsorption of the molecule to the surface, an interface resonance with a partial occupancy is created. The spectroscopic data taken at the interface resonance indicate the existence of a split resonance arranged symmetrically with respect to the Fermi energy. The intensity of the occupied and unoccupied resonance show a complementary behavior regarding different positions of the interface resonance. At the positions, where the resonance in the occupied energy regime shows a maximum in intensity, the resonance in the unoccupied states is absent and vice versa. These experimental findings will be explained by a model approach, which postulates the influence of an effective magnetic field and a spin-filtering component. KW - Phthalocyanin KW - Rastertunnelmikroskop KW - Rastertunnelmikroskopie KW - Kondo-Effekt KW - Rashba-Effekt KW - Tieftemperatur-Rastertunnelmikroskopie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-121059 ER - TY - JOUR A1 - Wiedenmann, J. A1 - Bocquillon, E. A1 - Deacon, R.S. A1 - Hartinger, S. A1 - Herrmann, O. A1 - Klapwijk, T.M. A1 - Maier, L. A1 - Ames, C. A1 - Brüne, C. A1 - Gould, C. A1 - Oiwa, A. A1 - Ishibashi, K. A1 - Tarucha, S. A1 - Buhmann, H. A1 - Molenkamp, L.W. T1 - 4π-periodic Josephson supercurrent in HgTe-based topological Josephson junctions JF - Nature Communications N2 - The Josephson effect describes the generic appearance of a supercurrent in a weak link between two superconductors. Its exact physical nature deeply influences the properties of the supercurrent. In recent years, considerable efforts have focused on the coupling of superconductors to the surface states of a three-dimensional topological insulator. In such a material, an unconventional induced p-wave superconductivity should occur, with a doublet of topologically protected gapless Andreev bound states, whose energies vary 4π-periodically with the superconducting phase difference across the junction. In this article, we report the observation of an anomalous response to rf irradiation in a Josephson junction made of a HgTe weak link. The response is understood as due to a 4π-periodic contribution to the supercurrent, and its amplitude is compatible with the expected contribution of a gapless Andreev doublet. Our work opens the way to more elaborate experiments to investigate the induced superconductivity in a three-dimensional insulator. KW - Josephson effect KW - supercurrent KW - superconductors Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-175353 VL - 7 ER - TY - THES A1 - Sturm, Volker Jörg Friedrich T1 - \(^{19}F\) Magnetresonanztomographie zur Bildgebung von Infektionen im Zeitverlauf T1 - \(^{19}F\) magnetic resonance imaging to monitor the timecourse of bacterial infections in vivo N2 - Im Rahmen dieser Arbeit sollten die Möglichkeiten der MR Tomographie erkundet werden bakterielle Infektionen im Zeitverlauf darzustellen. Genauer gesagt sollte das Potential der MR Tomographie anhand eines durch eine Infektion induzierten lokalisierten Abszesses unter Verwendung dreier unterschiedlicher MRT Methoden untersucht werden: Mittels nativem \(T_2\) Kontrast; der Verwendung von superparamagnetischen Eisenoxid Partieln (USPIO) als \(T_2^*\) Kontrastmittel; und dem Einsatz von Perfluorkarbonen (PFC) als \(^{19}F\) MRT Marker (siehe Kapitel 3). Wie erwartet führte die durch die Infektion hervorgerufene Entzündung zu veränderten \(T_2\)-Zeiten, welche auf \(T_2\)-gewichteten MR Bildern eine Lokalisierung des Abszessbereiches erlauben. Jedoch eigneten sich diese Daten aufgrund der graduellen Änderung der \(T_2\)-Zeiten nicht, um eine klare Grenze zwischen Abszess und umliegendem Gewebe zu ziehen. Superparamagnetische Eisenoxidpartikel andererseit haben als MRT Kontrastmittel bereits in den letzten Jahren ihre Fähigkeit unter Beweis gestellt Entzündungen [53, 58, 64] darzustellen. Die Anreicherung dieser Partikel am Rande des Abszesses [53], wie sie auch in unseren MR Daten zu beobachten war, erlaubte eine relativ scharfe Abgrenzung gegenüber dem umgebenden Gewebe in der chronischen Phase der Infektion (Tag 9 p.i.). Hingegen genügte die nur sehr spärlichen Anreicherung von USPIO Partikeln in der akuten Phase der Infektion (Tag 3 p.i.) nicht für eine entsprechende Abgrenzung [58]. Aufgrund der sehr geringen biologischen Häufigkeit und den sehr kurzen Relaxationszeiten von endogenem Fluor eignen sich Perfluorkarbone als Markersubstanz in der MR Tomographie von biologischen Systemen. Insbesondere da PFC Emulsionen durch phagozytierende Zellen aufgenommen werden und im Bereich von Entzündungen akkumulieren [30, 59]. In dieser Arbeit konnte anhand der erhaltenen MRT Daten eine Akkumulation von Perfluorkarbonen nicht nur in der chronischen Phase, sondern auch in der akuten Phase nachgewiesen werden. Diese Daten erlauben somit zu allen untersuchten Zeitpunkten eine Abgrenzung zwischen Infektion und umliegenden Gewebe. Aufgrund der besagten Vorteile wurden die Perfluorkarbone gewählt, um die Möglichkeiten der MR Tomographie zu testen, quantitative Informationen über die schwere der Infektion zu liefern. Als Referenz für die Bakterienbelastung wurden die Biolumineszenzbildgebung (BLI) [49, 50] und die Standardmethode zur Bestimmung der Bakterienbelastung cfu (koloniebildenden Einheiten) herangezogen. Eine Gegenüberstellung der zeitlichen Verläufe der durch die Biolumineszenzbildgebung und durch die cfu erhaltenen Daten liefert eine qualitative Übereinstimmung mit den durch die 19F MR Tomographie erhaltenen Daten. Dies trifft hierbei sowohl auf die über den gesamten Infektionsbereich hinweg summierten Signalamplituden, als auch auf das Volumen zu, in dem Fluor am Ort der Infektion akkumuliert wurde. Im Gegensatz zur Methode der cfu Bestimmung sind die MR Tomographie und die Biolumineszenzbildgebung nicht invasiv und erlauben die Verfolgung des Infektionsverlaufes an einem einzelnen Individuum. Hierzu benötigt, im Gegensatz zur MR Tomographie, die Methode der Biolumineszenzbildgebung jedoch einen speziellen Pathogenstamm. Darüber hinaus ist hervorzuheben, dass die MR Tomographie zudem die Möglichkeit bietet auch morphologische Informationen über den Infektionsbereich und seine Umgebung zu akquirieren. Gerade weil jede dieser Methoden die mit der Infektion einhergehenden Prozesse aus einer leicht anderen Blickrichtung betrachtet, erscheint es sinnvoll diese etablierte Untersuchungsplattform bestehend aus MRT, BLI und cfu über die in dieser Arbeit bearbeitete Fragestellung hinaus näher zu untersuchen. Insbesondere der Aspekt inwieweit die drei Methoden sich gegenseitig ergänzen, könnte einen tieferen Einblick in die Wechselwirkung zwischen Pathogen und Wirt erlauben. Auch wenn für die betrachtete Fragestellung bereits der hierdurchgeführte semiquanitative Ansatz zur Bestimmung der relativen Fluormengen am Ort der Infektion ausreichte, so ist doch im Allgemeinen wünschenswert probenbezogen die Sensitivität der Spule und damit die Güte der Spulenabstimmung zu bestimmen. Hierzu ist jedoch die Aufnahme von \(B_1\)-Karten unabdingbar und wird entsprechend im Kapitel 4 \(Bloch-Siegert B_1^+-Mapping\) näher addressiert. Der Schwerpunkt liegt hierbei, wie der Kapitelname bereits andeutet, auf der Bloch-Siegert Methode, die insbesondere in der präsentierten Implementierung in einer Turbo/ Multi Spin Echo Sequenz eine effiziente Nutzung der relativ langen \(T_\)2-Zeiten der Perfluorkarbone erlaubt. Da zudem die Bloch-Siegert-Methode eine rein phasenbasierte Methode ist, kann neben der aus den Daten erzeugten \(B_1\)-Karte zugleich ein unverfälschtes Magnitudenbild generiert werden, wodurch eine sehr effiziente Nutzung der vorhandenen Messzeit ermöglicht wird. Diese Eigenschaft ist insbesondere für \(^{19}F\) Bildgebung von besonderem Interesse, da hier für jede Messung, aufgrund der üblicherweise relativ geringen Konzentration an Fluoratomen, lange Messzeiten benötigt werden. Zusammenfassend konnte anhand des untersuchten Tiermodells sowohl die Fähigkeit der MR Tomographie nachgewiesen werden Infektionen im Zeitverlauf darzustellen, als auch die Fähigkeit der MR Tomographie quantitative Informationen über den Verlauf der Infektion zu liefern. Desweiteren konnte eine Möglichkeit aufgezeigt werden, welche das Potential hat in vertretbarem Zeitrahmen auch in vivo B1+-Karten auf dem Fluorkanal zu erstellen und so einen zentralen Unsicherheitsfaktor, für Relaxometry und absolute Quantifizierung von \(^{19}F\) Daten in vivo, zu beseitigen. N2 - The main focus of this work is to investigate the potential of magnetic resonance imaging (MRI) to monitor the timecourse of bacterial infections in vivo. More specifically, it focuses on the ability to localize and assess an infection-induced localized bulky abscess using three different MRI methods: the utilization of native \(T_2\) contrast; the usage of super paramagnetic iron oxide nanoparticles (USPIO) as MRI \(T_2^*\) contrast agents; and the application of perfluorcarbons (PFC) as \(^{19}F\) MRI marker (see chapter 3). Study results demonstrated that, as expected the altered \(T_2\) values present in the abscess area permit localization of the infection when using \(T_2\) weighted data. The precise boundary of the abscess, however, could not be determined due to the gradual change of the \(T_2\) values in the area of the infection. Conforming to other studies [53, 58], the MR-detected accumulation of USPIO particles along the abscess rim allowed definition of a fairly exact demarcation line between the abscess and surrounding tissue during the chronic phase of the infection (day 9 p.i.). During the acute phase of the infection (day 3 p.i.), however, the particle accumulation at the abscess rim was too sparse for precise boundary definition [58]. Because of their extremely low biological abundance and the very short relaxation times of endogenous fluorine, PFCs can be imaged background-free in a biological system. Moreover, as emulsified PFCs were taken up by phagocytosing cells and accumulated at the site of inflammation [30, 59], the acquired MRI data showed PFC accumulation during both the chronic and acute phases of infection. It was thus possible to differentiate between the abscess and surrounding tissue at each examined time point. Due to the described advantages, PFCs were chosen to evaluate with MRI the infection severity. As a bacterial burden reference, colony forming units (cfu) and bioluminescence imaging (BLI) [49, 50] were selected. Observation of BLI, cfu and \(^{19}F\) MRI data showed qualitative correlation during the investigated time course. This was true for the accumulated \(^{19}F\) MR signal in the area of infection and for the \(^{19}F\) MR signal volume. Additionally, unlike the cfu method MRI and BLI are non-invasive and thus data can be gathered at multiple time points. However, contrary to BLI, MRI does not require a special pathogen strain. Moreover, it can provide morphological data from an abscess and the surrounding tissue. Because the data delivered by each of these three methods (MRI, BLI and cfu), are based on alternative approaches, additional examinations of the established platform are suggested. For example, the extent to which the methods supplement each other may provide deeper insight into the interaction between pathogen and host. Even though the chosen semi quantitative approach was sufficient in the context of the evaluated issues to estimate the relative fluorine amount at the site of infection, it is in general desirable for each quantification to determine the sensitivity of the coil per sample. To address this issue the Bloch Siegert (BS) based \(B_1\) mapping method implemented in a turbo/ multi spin echo (TSE/MSE) sequence is presented in Chapter 4 Bloch-Siegert \(B_1^+\)-Mapping. Such a sequence allows effective use of the relatively long PFC \(T_2\) times and encodes BS information solely into the phase data. Thus, a \(B_1\) map can be created in addition to the unaltered TSE/MSE magnitude image. In the context of \(^{19}F\) imaging, this is of special interest due to the usually low amounts of fluorine resulting in long measurement times. In conclusion, it was shown that MRI not only enables visualization of the temporal behavior of infections on the investigated animal model, but it can also provide quantitative information about the progress of the infection. Additionally, a method potentially allowing in vivo B1+ mapping was introduced. This is an important step to improve the reliability of relaxometry and absolute quantification of in vivo \(^{19}F\) MRI. KW - Kernspintomografie KW - Bakterielle Infektion KW - 19F MR KW - Perfluorkarbon KW - Infektionsbildgebung KW - Bloch Siegert KW - B1 Mapping KW - Kontrastmittel Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-122851 ER - TY - JOUR T1 - \({ZZ}\) -> l(+)l(-)l '(+)l '(-) cross-section measurements and search for anomalous triple gauge couplings in 13 TeV \({pp}\) collisions with the ATLAS detector JF - Physical Review D N2 - Measurements of ZZ production in the l(+)l(-)l'(+)l'(-) channel in proton-proton collisions at 13 TeV center-of-mass energy at the Large Hadron Collider are presented. The data correspond to 36.1 fb(-1) of collisions collected by the ATLAS experiment in 2015 and 2016. Here l and l ' stand for electrons or muons. Integrated and differential ZZ -> l(+)l(-)l'(+)l'(-) cross sections with Z -> l(+)l(-) candidate masses in the range of 66 GeV to 116 GeV are measured in a fiducial phase space corresponding to the detector acceptance and corrected for detector effects. The differential cross sections are presented in bins of twenty observables, including several that describe the jet activity. The integrated cross section is also extrapolated to a total phase space and to all standard model decays of Z bosons with mass between 66 GeV and 116 GeV, resulting in a value of 17.3 +/- 0.9 [+/- 0.6(start) +/- 0.5 (syst) +/- 0.6 (lumi)] pb. The measurements are found to be in good agreement with the standard model. A search for neutral triple gauge couplings is performed using the transverse momentum distribution of the leading Z boson candidate. No evidence for such couplings is found and exclusion limits are set on their parameters. KW - Parton Distributions KW - Events Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-225844 VL - 97 IS - 3 ER - TY - JOUR A1 - El-Kareh, Lydia A1 - Bihlmayer, Gustav A1 - Buchter, Arne A1 - Bentmann, Hendrik A1 - Blügel, Stefan A1 - Reinert, Friedrich A1 - Bode, Matthias T1 - A combined experimental and theoretical study of Rashba-split surface states on the ( √3x√3) Pb/Ag (111)R30° surface N2 - We report on a combined low-temperature scanning tunneling spectroscopy (STS), angle-resolved photoemission spectroscopy (ARPES), and density functional theory (DFT) investigation of the ( √3x√3) Pb/Ag (111)R30° surface alloy which provides a giant Rashba-type spin splitting. With STS we observed spectroscopic features that are assigned to two hole-like Rashba-split bands in the unoccupied energy range. By means of STS and quantum interference mapping we determine the band onsets, splitting strengths, and dispersions for both bands. The unambiguous assignment of scattering vectors is achieved by comparison to ARPES measurements. While intra-band scattering is found for both Rashba bands, inter-band scattering is only observed in the occupied energy range. Spin- and orbitally-resolved band structures were obtained by DFT calculations. Considering the scattering between states of different spin- and orbital character, the apparent deviation between experimentally observed scattering events and the theoretically predicted spin polarization could be resolved. KW - Rashba effect KW - spin–orbit coupling KW - scanning tunneling microscopy KW - angle resolved photo emission spectroscopy KW - density functional theory Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112786 ER - TY - THES A1 - Rüth, Michael T1 - A Comprehensive Study of Dilute Magnetic Semiconductor Resonant Tunneling Diodes T1 - Umfassende Untersuchung von resonanten Tunneldioden aus verdünnt-magnetischen Halbleitern N2 - We investigate transport measurements on all II-VI semiconductor resonant tunneling diodes (RTDs). Being very versatile, the dilute magnetic semiconductor (DMS) system (Zn,Be,Mn,Cd)Se is a perfect testbed for various spintronic device designs, as it allows for separate control of electrical and magnetic properties. In contrast to the ferromagnetic semiconductor (Ga,Mn)As, doping ZnSe with Mn impurities does not alter the electrical properties of the semiconductor, as the magnetic dopant is isoelectric in the ZnSe host. N2 - Diese Doktorarbeit befasst sich mit Transportmessungen an resonanten Tunneldioden (engl. resonant tunneling diode, RTD), welche vollst� andig aus II-VI Halbleitermaterial bestehen. Das verd� unnt magnetische (engl. dilute magnetic semiconductor, DMS) Halbleitermaterialsystem (Zn,Be,Mn,Cd)Se ist sehr vielseitig und eignet sich hervorragend als Testsystem f� ur diverse Spintronik Bauelemente, denn magnetische und elektrische Eigenschaften lassen sich getrennt voneinander einstellen. Im Gegensatz zum ferromagnetischen Halbleiter (Ga,Mn)As ver� andert das Dotieren von ZnSe mit Mn nicht die elektrischen Eigenschaften des Halbleiters. KW - Semimagnetischer Halbleiter KW - Resonanz-Tunneleffekt KW - Halbleiter KW - Resonante Tunneldioden KW - Spintronik KW - dilute magnetic semiconductors KW - spintronics KW - resonant tunneling diodes Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-71472 ER - TY - JOUR A1 - Karak, Suvendu A1 - Stepanenko, Vladimir A1 - Addicoat, Matthew A. A1 - Keßler, Philipp A1 - Moser, Simon A1 - Beuerle, Florian A1 - Würthner, Frank T1 - A Covalent Organic Framework for Cooperative Water Oxidation JF - Journal of the American Chemical Society N2 - The future of water-derived hydrogen as the “sustainable energy source” straightaway bets on the success of the sluggish oxygen-generating half-reaction. The endeavor to emulate the natural photosystem II for efficient water oxidation has been extended across the spectrum of organic and inorganic combinations. However, the achievement has so far been restricted to homogeneous catalysts rather than their pristine heterogeneous forms. The poor structural understanding and control over the mechanistic pathway often impede the overall development. Herein, we have synthesized a highly crystalline covalent organic framework (COF) for chemical and photochemical water oxidation. The interpenetrated structure assures the catalyst stability, as the catalyst’s performance remains unaltered after several cycles. This COF exhibits the highest ever accomplished catalytic activity for such an organometallic crystalline solid-state material where the rate of oxygen evolution is as high as ∼26,000 μmol L\(^{–1}\) s\(^{–1}\) (second-order rate constant k ≈ 1650 μmol L s\(^{–1}\) g\(^{–2}\)). The catalyst also proves its exceptional activity (k ≈ 1600 μmol L s\(^{–1}\) g\(^{–2}\)) during light-driven water oxidation under very dilute conditions. The cooperative interaction between metal centers in the crystalline network offers 20–30-fold superior activity during chemical as well as photocatalytic water oxidation as compared to its amorphous polymeric counterpart. KW - water oxidation KW - sustainable energy source KW - covalent organic framework KW - catalyst KW - crystalline KW - catalysis KW - nanoparticles Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-287591 UR - https://pubs.acs.org/doi/10.1021/jacs.2c07282 SN - 0002-7863 VL - 144 IS - 38 ER - TY - THES A1 - Mark, Stefan T1 - A Magnetic Semiconductor based Non-Volatile Memory and Logic Element T1 - Ein auf magnetischen Halbleiter basierendes nicht-flüchtiges Speicher- und Logik-Element N2 - For the realization of a programmable logic device, or indeed any nanoscale device, we need a reliable method to probe the magnetization direction of local domains. For this purpose we extend investigations on the previously discovered tunneling anisotropic magneto resistance effect (TAMR) by scaling the pillar size from 100 µm down to 260 nm. We start in chapter 4 with a theoretical description of the TAMR effect and show experimental data of miniaturized pillars in chapter 5. With such small TAMR probes we are able to locally sense the magnetization on the 100 nm scale. Sub-micron TAMR and anisotropic magneto resistance (AMR) measurements of sub-millimeter areas show that the behavior of macroscopic (Ga,Mn)As regions is not that of a true macrospin, but rather an ensemble average of the behavior of many nearly identical macrospins. This shows that the magnetic anisotropies of the local regions are consistent with the behavior extracted from macroscopic characterization. A fully electrically controllable read-write memory device out the ferromagnetic semiconductor (Ga,Mn)As is presented in chapter 6. The structure consists of four nanobars which are connected to a circular center region. The first part of the chapter describes the lithography realization of the device. We make use of the sub-micron TAMR probes to read-out the magnetization state of a 650 nm central disk. Four 200 nm wide nanobars are connected to the central disk and serve as source and drain of a spin-polarized current. With the spin-polarized current we are able to switch the magnetization of the central disk by means of current induced switching. Injecting polarized holes with a spin angular momentum into a magnetic region changes the magnetization direction of the region due to the p-d exchange interaction between localized Mn spins and itinerant holes. The magnetization of the central disk can be controlled fully electrically and it can serve as one bit memory element as part of a logic device. In chapter 7 we discuss the domain wall resistance in (Ga,Mn)As. At the transition from nanobars to central disk we are able to generate 90° and 180° domain walls and measure their resistance. The results presented from chapter 5 to 7 combined with the preexisting ultracompact (Ga,Mn)As-based memory cell of ref. [Papp 07c] are the building blocks needed to realize a fully functioning programmable logic device. The work of ref. [Papp 07c] makes use of lithographically engineered strain relaxation to produce a structure comprised of two nanobars with mutually orthogonal uniaxial easy axes, connected by a narrow constriction. Measurements showed that the resistance of the constriction depends on the relative orientation of the magnetization in the two bars. The programmable logic device consists of two central disks connected by a small constriction. The magnetization of the two central disks are used as the input bits and the constriction serves as the output during the logic operation. The concept is introduced in the end of chapter 6 and as an example for a logic operation an XOR gate is presented. The functionality of the programmable logic scheme presented here can be straightforwardly extended to produce multipurpose functional elements, where the given geometry can be used as various different computational elements depending on the number of input bits and the chosen electrical addressing. The realization of such a programmable logic device is shown in chapter 8, where we see that the constriction indeed can serve as a output of the logic operation because its resistance is dependent on the relative magnetization state of both disks. Contrary to ref. [Papp 07c], where the individual magnetic elements connected to the constriction only have two non-volatile magnetic states, each disk in our scheme connected to the constriction has four non-volatile magnetic states. Switching the magnetization of a central disk with an electrical current does not only change the TAMR read-out of the respective disk, it also changes the resistance of the constriction. The resistance polar plot of the constriction maps the relative magnetization states of the individual disks. The presented device design serves as an all-electrical, all-semiconductor logic element. It combines a memory cell and data processing in a single monolithic paradigm. N2 - Für die Realisierung eines programmierbaren Logikelements oder beliebiger nanometer großer Bauteile, brauchen wir eine verlässlige Methode, um die Magnetisierungsrichtung lokaler Domänen auzulesen. Dafür erweitern wir die Untersuchungen an TAMR (tunneling magneto resistance) Strukturen und skalieren die Fläche des Tunnelkontakts von 100 µm auf 260 nm. In Kapitel 4 geben wir zunächst eine theoretische Beschreibung des TAMR Effekts und zeigen darauf im folgenden Kapitel 5 experimentelle Daten der miniaturisierten Tunnelkontakte. Mit diesen TAMR-Kontakten ist es möglich die Magnetisierung lokal in einer Grössenordnung von 100 nm zu detektieren. Sub-micron TAMR-Messungen und anisotrope Magnetowiderstandmessungen (AMR) an sub-millimeter Gebieten zeigen, dass das Verhalten von makrokopischen (Ga,Mn)As nicht das eines Makrospins ist, sondern ein Ensembledurchschnitt von vielen fast identischen Makrospins. Dieses Ergebnis ist mit der makroskopischen Beschreibung der lokalen magnetischen Aniotropien konform.\\ Ein rein elektrisch kontrollierbares Read-Write Speicherelement aus dem ferromagnetischen Halbleiter (Ga,Mn)As wird in Kapitel 6 gezeigt. Das Element besteht aus vier 200 nm breiten Streifen, die mit einer kreisförmigen zentralen Disc verbunden sind. Der erste Teil des Kapitels beschreibt die einzelnen Lithographieschritte zur Herstellung des Elements. Zum Auslesen der Magnetisierungsrichtung der zentralen Disc mit einem Durchmesser von 650 nm verwenden wir einen miniaturisierten TAMR-Kontakt. Die 200 nm breiten Streifen dienen als Quelle eines spinpolarisierten Stromes in die zentrale Disc. Das Injezieren von polarisierten Löchern mit einem Spin-Drehimpuls in eine magnetische Region verändert die Magnetisierung der Region durch p-d Austauschwechselwirkung zwischen lokalisierten Mn-Spins und den Löchern. Die Magnetisierung der zentralen Disc kann rein elektrisch kontrolliert werden and als Bit eines Logikelementes verwendet werden. In Kapitel 7 untersuchen wir den Domänenwiderstand in (Ga,Mn)As. Am Übergang von den Streifen zur zentralen Disc ist es möglich 90°- und 180° Domänenwände zu erzeugen und deren Widerstand zu messen.\\ Die Ergebnisse von Kapitel 5 bis 7, kombiniert mit dem bereits existierenden Ergebnissen einer ultrakompakten (Ga,Mn)As-basierenden Speicherzelle von Ref. [Papp 07c], sind die Schlüsselelemente die man zur Realisierung eines programmierbaren Logikelements benötigt. Die Arbeit von Referenz [Papp 07c] nutzt Lithographie induzierte Deformationsrelaxation, um eine Struktur zu erzeugen, die aus zwei senkrechten Streifen besteht und durch eine Verengung verbunden sind. Der Widerstand dieser Verengung ist von der relativen Magnetisierungsorientierung der beiden Streifen abhängig. Das programmierbare Logikelement besteht aus zwei zentralen Discs, die mittels einer schmalen Verengung verbunden sind. Die Magnetisierung der beiden zentralen Discs dienen als Eingänge und die Verengung als Ausgang während der Logikoperation. Das Konzept wird am Ende des sechsten Kapitels eingeführt und als Beispiel für eine Logikoperation wird ein XOR-Gate präsentiert. Die Funktionalität des hier gezeigten programmierbaren Logikschemas kann Problemlos auf ein multifunktionales Element erweitert werden. Diese Geometrie kann abhängig von der Anzahl der Eingänge und der gewählten Adressierung für verschiedene Rechenelemente genutzt werden. \\ Die Realisierung eines programmierbaren Logikelements ist in Kapitel 8 gezeigt. Der Widerstand der Verengung hängt von der relativen Magnetisierungsrichtung der beiden zentralen Discs ab und wird als Ausgang während der Logikoperation verwendet. Im Gegensatz zu Referenz [Papp 07c], indem die einzelnen über die Verengung verbundenen magnetischen Elemente jeweils nur zwei nicht-flüchtige magnetische Zustände besitzen, hat jede zentrale Disc in unserem Schema vier nicht-flüchtige magnetische Zustände. Das Verändern der Magnetisierungsrichtung einer zentralen Disc durch einen elektrischen Strom kann durch den jeweiligen TAMR-Kontakt und durch die Widerstandänderung der Verengung gemessen werden. Der Widerstands-Fingerabdruck (resistance polar plot) der Verengung zeigt die verschiedenen relativen Magnetisierungszutände der zentralen Discs.\\ Das hier präsentierte Konzept dient als reines Halbleiter und rein-elektrisches Logikelement. Es kombiniert eine Speicherzelle und Datenverarbeitung in einem neuartigen monolithischen Bauelement. KW - Magnetischer Halbleiter KW - Magnetische Halbleiter KW - Magnetische Anisotropien KW - Spinelektronik KW - magnetic semiconductors KW - magnetic anisotropy KW - Magnetic properties of thin films interfaces KW - Spinelectronic KW - Magnetische Anisotropie KW - Spintronik Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-71223 ER - TY - THES A1 - Nguyen, Thanh Nam T1 - A model system for carbohydrates interactions on single-crystalline Ru surfaces T1 - Modellsystem für die Wechselwirkungen von Kohlenwasserstoffen mit ein kristallinen Rutheniumoberflächen N2 - In this thesis, I present a model system for carbohydrate interactions with single-crystalline Ru surfaces. Geometric and electronic properties of copper phthalocyanine (CuPc) on top of graphene on hexagonal Ru(0001), rectangular Ru(10-10) and vicinal Ru(1,1,-2,10) surfaces have been studied. First, the Fermi surfaces and band structures of the three Ru surfaces were investigated by high-resolution angle-resolved photoemission spectroscopy. The experimental data and theoretical calculations allow to derive detailed information about the momentum-resolved electronic structure. The results can be used as a reference to understand the chemical and catalytic properties of Ru surfaces. Second, graphene layers were prepared on the three different Ru surfaces. Using low-energy electron diffraction and scanning tunneling microscopy, it was found that graphene can be grown in well-ordered structures on all three surfaces, hexagonal Ru(0001), rectangular Ru(10-10) and vicinal Ru(1,1,-2,10), although they have different surface symmetries. Evidence for a strong interaction between graphene and Ru surfaces is a 1.3-1.7e V increase in the graphene pi-bands binding energy with respect to free-standing graphene sheets. This energy variation is due to the hybridization between the graphene pi bands and the Ru 4d electrons, while the lattice mismatch does not play an important role in the bonding between graphene and Ru surfaces. Finally, the geometric and electronic structures of CuPc on Ru(10-10), graphene/Ru(10-10), and graphene/Ru(0001) have been studied in detail. CuPc molecules can be grown well-ordered on Ru(10-10) but not on Ru(0001). The growth of CuPc on graphene/Ru(10-10) and Ru(0001) is dominated by the Moire pattern of graphene. CuPc molecules form well-ordered structures with rectangular unit cells on graphene/Ru(10-10) and Ru(0001). The distance of adjacent CuPc molecules is 1.5 and 1.3 nm on graphene/Ru(0001) and 1.54 and 1.37 nm on graphene/Ru(10-10). This indicates that the molecule-substrate interaction dominates over the intermolecular interaction for CuPc molecules on graphene/Ru(10-10) and graphene/Ru(0001). N2 - In dieser Arbeit stelle ich ein Modellsystem für die Wechselwirkungen von Kohlenwasserstoffen mit ein kristallinen Rutheniumoberflächen vor. Die geometrischen und elektronischen Eigenschaften von Kupfer-Phthalocyanin (CuPc) als Deckschicht über Graphen auf hexagonalen Ru(0001)-, rechteckigen Ru(10-10)- und vicinalen Ru(1,1,-2,10)-Oberflächen wurden untersucht. Zunächst wurden die Fermioberflächen und Bandstrukturen der drei Rutheniumoberflächen mittels hochauflösender winkelaufgelöster Photoemissions spektroskopie ermittelt. Die experimentellen Daten und theoretischen Berechnungen erlauben es, detaillierte Informationen zur impulsaufgelösten elektronischen Struktur abzuleiten. Die Ergebnisse können als Referenz für ein besseres Verständnis der chemischen und katalytischen Eigenschaften von Rutheniumoberflächen dienen. Als nächstes wurden Graphenschichten auf den drei verschiedenen Rutheniumoberflächen hergestellt. Bei Messungen der Beugung niederenergetischer Elektronen an den Oberflächen sowie mittels Rastertunnelmikroskopie stellte sich heraus, dass Graphen hoch geordnete Strukturen auf allen drei Oberflächen, hexagonalem Ru(0001), rechteckigem Ru(10-10) und vicinalem Ru(1,1,-2,10), bildet, obwohl diese unterschiedliche Symmetrien aufweisen. Ein Hinweis auf eine starke Wechselwirkung zwischen Graphen und den Rutheniumoberflächen ist der Anstieg der Bindungsenergie der Graphen-pi-Bänder um 1.3-1.7 eV im Vergleich zu freistehenden Graphenschichten. Diese Änderung der Energie beruht auf der Hybridisierung zwischen den Graphen-pi-Bändern und den 4d-Elektronen des Rutheniums, wohingegen der Gitterversatz keine große Rolle bei der Bindung zwischen Graphen und Rutheniumoberflächen spielt. Abschließend wurden die geometrischen und elektronischen Strukturen von CuPc auf Ru(10-10), Graphen/Ru(10-10) und Graphen/Ru(0001) im Detail untersucht. CuPc-Moleküle konnten mit hoher Ordnung auf Ru(10-10) abgelagert werden, nicht jedoch auf Ru(0001). Das Wachstum von CuPc auf Graphen/Ru(10-10) und Ru(0001) wird durch die Moirestruktur des Graphens bestimmt. CuPc-Moleküle bilden hoch geordnete Strukturen mit rechteckigen Elementarzellen auf Graphen/Ru(10-10) und Ru(0001). Der Abstand benachbarter CuPc-Moleküle beträgt 1.5 und 1.3 nm auf Graphen/Ru(0001) sowie 1.54 und 1.37 nm auf Graphen/Ru(10-10). Dies weist darauf hin, dass die Molekül-Substrat-Wechselwirkung bei CuPc-Molekülen auf Graphen/Ru(10-10) und Graphen/Ru(0001) stärker ist als die intermolekulare Wechselwirkung zwischen den CuPc-Molekülen. KW - Ruthenium KW - Kristalloberfläche KW - Kohlenwasserstoffe KW - Wechselwirkung KW - single-crystalline Ru surfaces KW - Graphene KW - CuPc KW - Ru(0001) KW - Step Ru surface Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-111485 ER - TY - JOUR A1 - Herrmann, K. H. A1 - Happ, M. A1 - Möllmann, K.-P. A1 - Tomm, J. W. A1 - Becker, Charles R. A1 - Kraus, M. M. A1 - Yuan, S. A1 - Landwehr, G. T1 - A new model for the absorption coefficient of narrow gap (Hg,Cd)Te that simultaneously considers band tails and band filling N2 - A semiempirical model is presented that correlates the broadening of the absorption edge with both transitions below the energy gap and with transitions by the Kane band model. This model correctly fits both the absorption and luminescence spectra of narrow-gap (Hg,Cd)Te samples that have been grown by the traveling heater method as well as by molecular-beam epitaxy. The accuracy of the band-gap determination is enhanced by this model. Y1 - 1993 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-37894 ER - TY - THES A1 - Herget, Verena T1 - A novel approach for the calibration of the hadronic recoil for the measurement of the mass of the W boson with the ATLAS Experiment T1 - Eine neuartige Methode zur Kalibrierung des hadronischen Rückstoßes für die Messung der Masse des W-Bosons mit dem ATLAS Experiment N2 - The measurement of the mass of the $W$ boson is currently one of the most promising precision analyses of the Standard Model, that could ultimately reveal a hint for new physics. The mass of the $W$ boson is determined by comparing the $W$ boson, which cannot be reconstructed directly, to the $Z$ boson, where the full decay signature is available. With the help of Monte Carlo simulations one can extrapolate from the $Z$ boson to the $W$ boson. Technically speaking, the measurement of the $W$ boson mass is performed by comparing data taken by the ATLAS experiment to a set of calibrated Monte Carlo simulations, which reflect different mass hypotheses.\ A dedicated calibration of the reconstructed objects in the simulations is crucial for a high precision of the measured value. The comparison of simulated $Z$ boson events to reconstructed $Z$ boson candidates in data allows to derive event weights and scale factors for the calibration. This thesis presents a new approach to reweight the hadronic recoil in the simulations. The focus of the calibration is on the average hadronic activity visible in the mean of the scalar sum of the hadronic recoil $\Sigma E_T$ as a function of pileup. In contrast to the standard method, which directly reweights the scalar sum, the dependency to the transverse boson momentum is less strongly affected here. The $\Sigma E_T$ distribution is modeled first by means of its pileup dependency. Then, the remaining differences in the resolution of the vector sum of the hadronic recoil are scaled. This is done separately for the parallel and the pterpendicular component of the hadronic recoil with respect to the reconstructed boson. This calibration was developed for the dataset taken by the ATLAS experiment at a center of mass energy of $8\,\textrm{TeV}$ in 2012. In addition, the same reweighting procedure is applied to the recent dataset with a low pileup contribution, the \textit{lowMu} runs at $5\,\textrm{TeV}$ and at $13\,\textrm{TeV}$, taken by ATLAS in November 2017. The dedicated aspects of the reweighting procedure are presented in this thesis. It can be shown that this reweighting approach improves the agreement between data and the simulations effectively for all datasets. The uncertainties of this reweighting approach as well as the statistical errors are evaluated for a $W$ mass measurement by a template fit to pseudodata for the \textit{lowMu} dataset. A first estimate of these uncertainties is given here. For the pfoEM algorithm a statistical uncertainty of $17\,\text{MeV}$ for the $5\,\textrm{TeV}$ dataset and of $18\,\text{MeV}$ for the $13\,\textrm{TeV}$ are found for the $W \rightarrow \mu \nu$ analysis. The systematic uncertainty introduced by the resolution scaling has the largest effect, a value of $15\,\text{MeV}$ is estimated for the $13\,\textrm{TeV}$ dataset in the muon channel. N2 - Die Messung der Masse des $W$-Bosons ist im Augenblick eine der vielversprechendsten Präzisionsanalysen des Standard Modells, welche letztendlich einen Hinweis auf neue Physik geben kann. Die Masse des $W$ Bosons wird bestimmt, indem das $W$-Boson, welches nicht direkt rekonstruiert werden kann, mit dem $Z$-Boson verglichen wird, bei dem die vollständige Zerfallssignatur verfügbar ist. Mit Hilfe von Monte Carlo Simulationen kann vom $Z$-Boson auf das $W$-Boson extrapoliert werden. Genau genommen wird die Messung der Masse des $W$-Bosons durchgeführt, indem die Daten, die mit dem ATLAS Experiment aufgenommen wurden, mit einem Satz von kalibrierten Monte Carlo Simulationen verglichen wird. Die Simulationen spiegeln dabei verschiedene Massenhypothesen wider. Eine dezidierte Kalibrierung der rekonstruierten Objekte in den Simulationen ist entscheidend für eine hohe Präzision des gemessenen Werts der Masse des $W$-Bosons. Aus dem Vergleich von simulierten $Z$-Boson Ereignissen und $Z$-Bosonen, die aus den Daten rekonstruiert werden, können Ereignisgewichte und Skalierungsfaktoren für die Kalibrierung erzeugt werden. %Für die Kalibrierung werden Ereignisgewichte und Skalierungsfaktoren erzeugt, indem Simulationen von $Z$ Boson Ereignissen mit $Z$ Bosonen verglichen werden, welche aus den Daten rekonstruiert werden. In dieser Arbeit wird ein neuer Ansatz für die Umgewichtung des hadronischen Rückstoßes in den Simulationen vorgestellt. Der Fokus der Kalibrierung liegt auf der mittleren hadronischen Aktivität, die in der mittleren skalaren Summe des hadronischen Rückstoßes $\Sigma E_T$ als Funktion des Pileups sichtbar ist. Im Gegensatz zur Standardmethode, welche die Skalarsumme direkt umgewichtet, wird hierbei die Abhängigkeit zum transversalen Impuls des Bosons weniger stark beeinflusst. Die $\Sigma E_T$-Verteilung wird zunächst mittels ihrer Abhängigkeit zum Pileup modelliert. Danach werden die verbleibenden Unterschiede in der Auflösung der vektoriellen Summe des hadronischen Rückstoßes skaliert. Dies geschieht separat für die parallele und senkrechte Komponente des hadronischen Rückstoßes, welche in Bezug auf die Richtung des rekonstruierten Bosons gemessen werden. Die Kalibrierung wurde zunächst für den Datensatz entwickelt, der im Jahr 2012 bei einer Schwerpunktsenergie von $8\,\textrm{TeV}$ mit dem ATLAS Experiment aufgenommen wurde. Zusätzlich wird die Umgewichtungsmethodik auf die neuen Datensätze angewendet, welche von ATLAS im November 2017 bei niedrigem Pileup aufgenommen wurden, den \textit{lowMu} Datensätzen bei Schwerpunktsenergien von $5\,\textrm{TeV}$ und $13\,\textrm{TeV}$. In dieser Arbeit werden die verschiedenen Aspekte der Kalibrierung präsentiert. Es kann gezeigt werden, dass diese Herangehensweise für die Umgewichtung des hadronischen Rückstoßes zu einer effektiven Verbesserung der Übereinstimmung zwischen Daten und Simulationen in allen verwendeten Datensätzen führt. Die zugehörigen Unsicherheiten dieser Kalibrierungsmethode sowie die statistischen Fehler für eine Messung der Masse des $W$-Bosons werden anhand der Template-Fit-Methode mit Pseudodaten für die \textit{lowMu} Datensätze ausgewertet. Es wird eine erste Abschätzung dieser Unsicherheiten gegeben. Für den pfoEM Algorithmus wird ein statistischer Fehler von $17\,\text{MeV}$ für den $5\,\textrm{TeV}$ Datensatz und von $18\,\text{MeV}$ für den $13\,\textrm{TeV}$ Datensatz in der $W \rightarrow \mu \nu$ Analyse ermittelt. Die systematische Unsicherheit, welche durch die Auflösungsskalierung erzeugt wird, hat den größten Effekt. Für den $13\,\textrm{TeV}$ Datensatz wird ein Fehler von $15\,\text{MeV}$ im Myonkanal abgeschätzt. KW - Standardmodell KW - European Organization for Nuclear Research. ATLAS Collaboration KW - Präzisionsmessung KW - W-Boson KW - hadronischer Rückstoß KW - hadronic Recoil Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-177828 ER - TY - JOUR A1 - Winkler, Karol A1 - Fischer, Julian A1 - Schade, Anne A1 - Amthor, Matthias A1 - Dall, Robert A1 - Geßler, Jonas A1 - Emmerling, Monika A1 - Ostrovskaya, Elena A. A1 - Kamp, Martin A1 - Schneider, Christian A1 - Höfling, Sven T1 - A polariton condensate in a photonic crystal potential landscape JF - New Journal of Physics N2 - The possibility of investigating macroscopic coherent quantum states in polariton condensates and of engineering polariton landscapes in semiconductors has triggered interest in using polaritonic systems to simulate complex many-body phenomena. However, advanced experiments require superior trapping techniques that allow for the engineering of periodic and arbitrary potentials with strong on-site localization, clean condensate formation, and nearest-neighbor coupling. Here we establish a technology that meets these demands and enables strong, potentially tunable trapping without affecting the favorable polariton characteristics. The traps are based on a locally elongated microcavity which can be formed by standard lithography. We observe polariton condensation with non-resonant pumping in single traps and photonic crystal square lattice arrays. In the latter structures, we observe pronounced energy bands, complete band gaps, and spontaneous condensation at the M-point of the Brillouin zone. Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-125050 VL - 17 ER - TY - THES A1 - Tuchscherer, Philip T1 - A Route to Optical Spectroscopy on the Nanoscale T1 - Über Optische Spektroskopie auf der Nanoskala N2 - Time-resolved optical spectroscopy has become an important tool to investigate the dynamics of quantum mechanical processes in matter. In typical applications, a first “pump” pulse excites the system under investigation from the thermal equilibrium to an excited state, and a second variable time-delayed “probe” pulse then maps the dynamics of the excited system. Although advanced nonlinear techniques have been developed to investigate, e.g., coherent quantum effects, all of these techniques are limited in their spatial resolution. The laser focus diameter has a lower bound given by Abbe’s diffraction limit, which is roughly half the optical excitation wavelength—corresponding to about 400nm in the presented experiments. In the time-resolved experiments that have been suggested so far, averaging over the sample volume within this focus cannot be avoided. In this thesis, two approaches were developed to overcome the diffraction limit in optical spectroscopy and to enable the investigation of coherent processes on the nanoscale. In the first approach, analytic solutions were found to calculate optimal polarizationshaped laser pulses that provide optical near-field pump–probe pulse sequences in the vicinity of a nanostructure. These near-field pulse sequences were designed to allow excitation of a quantum system at one specific position at a certain time and probing at a different position at a later time. In the second approach, the concept of coherent two-dimensional (2D) spectroscopy, which has had great impact on the investigation of coherent quantum effects in recent years, was combined with photoemission electron microscopy, which yields a spatial resolution well below the optical diffraction limit. Using the analytic solutions, optical near fields were investigated in terms of spectroscopic applications. Near fields that are excited with polarization-shaped femtosecond laser pulses in the vicinity of appropriate nanostructures feature two properties that are especially interesting in the view of spectroscopic applications: On the one hand, control of the spatial distribution of the optical fields is achieved on the order of nanometers. On the other hand, the temporal evolution of these fields can be adjusted on the order of femtoseconds. In this thesis, solutions were found to calculate the optimal polarizationshaped laser pulses that control the near field in a general manner. The main idea to achieve this deterministic control was to disentangle the spatial and temporal near-field control. First, the spatial distribution of the optical near field was controlled by assigning the correct state of polarization for each frequency within the polarization-shaped laser pulse independently. The remaining total phase—not employed for spatial control—was then used for temporal near-field compression, which, in experimental applications, would lead to an enhancement of the nonlinear signal at the respective location. In contrast to the use of optical near fields, where pump–probe sequences themselves are localized below the diffraction limit and the detection does not have to provide the spatial resolution, a different approach was suggested in this thesis to gain spectroscopic information on the nanoscale. The new method was termed “Coherent two-dimensional (2D) nanoscopy” and transfers the concept of “conventional” coherent 2D spectroscopy to photoemission electron microscopy. The pulse sequences used for the investigation of quantum systems in this method are still limited by diffraction. However, the new key concept is to detect locally generated photoelectrons instead of optical signals. This yields a spatial resolution that is well below the optical diffraction limit. In “conventional” 2D spectroscopy a triple-pulse sequence initiates a four wave mixing process that creates a coherence. In a quantum mechanical process, this coherence is converted into a population by emission of an electric field, which is measured in the experiment. Contrarily, in the developed 2D nanoscopy, four-wave mixing is initiated by a quadruple-pulse sequence, which leaves the quantum system in an electronic population. This electronic population carries coherent information about the investigated quantum system and can be mapped with a spatial resolution down to a few nanometers given by the spatial resolution of the photoemission electron microscope. Hence, 2D nanoscopy can be considered a generalization of time-resolved photoemission experiments. In the future, it may be of similar beneficial value for the field of photoemission research as “conventional” 2D spectroscopy has proven to be for optical spectroscopy and nuclear magnetic resonance experiments. In a first experimental implementation of coherent 2D nanoscopy coherent processes on a corrugated silver surface were measured and unexpected long coherence lifetimes could be determined. N2 - Zur Untersuchung von Dynamiken quantenmechanischer Prozesse in Materie hat sich die zeitaufgelöste optische Spektroskopie zu einem zentralen Werkzeug entwickelt. Eine Standardmethode ist hierbei die Anrege-Abfrage-Spektroskopie. Bei solch einem Experiment wird das zu untersuchende System zunächst mit einem Anregepuls aus dem thermischen Gleichgewicht in einen höheren Zustand angeregt. Anschließend untersucht man mit einem zweiten zeitverzögerten Abfragepuls die Dynamik des angeregten Systems. Obwohl fortgeschrittene experimentelle Methoden entwickelt wurden um kohärente Quanteneffekte zu untersuchen, sind all diese Experimente nach wie vor in ihrer räumlichen Auflösung begrenzt. Aufgrund von Beugung ist der Fokus eines Laserstrahls limitiert. Diese untere Grenze ist durch Abbe’s Auflösungsgrenze gegeben und entspricht etwa der Hälfte der optischen Anregungswellenlänge, d.h. etwa 400nm in den hier vorgestellten Experimenten. Daher kann eine Mittelung über das Probenvolumen, gegeben durch die Fokusgröße, in den bisher vorgestellten Experimenten nicht vermieden werden. In dieser Arbeit wurden zwei Ansätze verfolgt, um die Beugungsgrenze in der optischen Spektroskopie zu überwinden und die Untersuchung von kohärenten Prozessen auf der Nanometerskala zu ermöglichen. Im ersten Ansatz wurden analytische Lösungen gefunden, um optimal polarisationsgeformte Laserpulse zu berechnen, die optische Anrege-Abfrage-Nahfeld-Pulsfolgen in der Nähe einer Nanostruktur ermöglichen. Diese Nahfeld-Pulsfolgen wurden entwickelt, um ein quantenmechanisches System an einer bestimmten Position zu einem bestimmten Zeitpunkt anzuregen und an einer anderen Position zu einem späteren Zeitpunkt abzufragen. Im zweiten Ansatz wurde das Konzept der kohärenten zweidimensionalen (2D) Spektroskopie, die in den letzten Jahren großen Einfluss auf die Untersuchung von kohärenten Quanteneffekten gehabt hat, mit Photoelektronenmikroskopie kombiniert. Letztere ermöglicht eine räumliche Auflösung deutlich unter der optischen Auflösungsgrenze. Mit Hilfe der analytischen Lösungen wurden optische Nahfelder in Bezug auf spektroskopische Anwendungen untersucht. Nahfelder, die mit polarisationsgeformten Femtosekunden-Laserpulsen in der Nähe von entsprechenden Nanostrukturen angeregt werden, verfügen über zwei Eigenschaften, die besonders interessant für spektroskopische Anwendungen sind: Zum einen kann die räumliche Verteilung der optischen Felder auf der Größenordnung von Nanometern kontrolliert werden. Zum anderen kann die zeitliche Entwicklung dieser Felder in der Größenordnung von Femtosekunden manipuliert werden. In dieser Arbeit wurden Lösungen gefunden, um optimale polarisationsgeformte Laserpulse zu berechnen, die diese Nahfeld-Steuerung in einer allgemeinen Art und Weise erlauben. Die Hauptidee, um diese deterministische Steuerung zu erreichen, war die räumliche und zeitliche Nahfeld-Kontrolle zu entkoppeln. Zuerst wurde dafür die räumliche Verteilung der optischen Nahfelder durch die Zuordnung des korrekten Polarisationszustandes für jede Frequenz, innerhalb des polarisationsgeformten Laserpulses, unabhängig gesteuert. Die verbleibende totale Phase, die nicht für die räumliche Kontrolle benötigt wird, wurde dann verwendet um den nichtlinearen Fluss an den gewünschten Positionen durch zeitliche Nahfeldkomprimierung zu erhöhen. Im Gegensatz zur Verwendung von optischen Nahfeldern, in der die Anrege-Abfrage-Nahfeld-Pulsfolgen selbst unter dem Beugungslimit lokalisiert sind und die Detektion nicht räumlich aufgelöst sein muss, wurde in dieser Arbeit noch ein anderer Ansatz vorgeschlagen, um spektroskopische Informationen auf der Nanometerskala zu erhalten. Die neue Methode wurde als „kohärente zweidimensionale (2D) Nanoskopie“ beschrieben und überträgt das Konzept der „herkömmlichen“ kohärenten 2D Spektroskopie auf die Photoemissionselektronenmikroskopie. In dieser neuen Methode ist die räumliche Auflösung der zur Untersuchung des quantenmechanischen Sytems erforderlichen Pulssequenzen zwar durch Beugung begrenzt. Die wesentliche Neuerung ist allerdings, lokal erzeugte Photoelektronen anstelle von optischen Signalen zu messen. Daraus ergibt sich eine räumliche Auflösung, die weit unterhalb der optischen Beugungsgrenze liegt. Die photoemittierten Elektronen tragen dann kohärente Information über das untersuchte System und können mit einer räumlichen Auflösung von wenigen Nanometern abgebildet werden. Die Auflösung ist dabei durch das verwendete Photoemissionsmikroskop vorgegeben. Demzufolge kann 2D Nanoskopie als eine Verallgemeinerung der zeitaufgelösten Photoemissionsexperimente gesehen werden. In einer ersten experimentellen Umsetzung der kohärenten 2D Nanoskopie wurden kohärente Prozesse auf einer rauhen Silberoberfläche untersucht und dabei unerwartet langlebige Kohärenzen gemessen. KW - Ultrakurzzeitspektroskopie KW - Kohärente Optik KW - Ultrakurzzeit Spektroskopie KW - Kohärente 2D Spektroskopie KW - Coherent 2D Spectroscopy KW - Nanooptic KW - Ultrafast spectroscopy KW - Surface plasmons KW - Optische Spektroskopie KW - Nahfeldoptik KW - Oberflächenplasmonresonanz Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72228 ER - TY - JOUR T1 - A search for pair-produced resonances in four-jet final states at root s=13 TeV with the ATLAS detector JF - The European Physical Journal C N2 - A search for massive coloured resonances which are pair-produced and decay into two jets is presented. The analysis uses 36.7 fb(-1) of root s = 13 TeV pp collision data recorded by the ATLAS experiment at the LHC in 2015 and 2016. No significant deviation from the background prediction is observed. Results are interpreted in a SUSY simplified model where the lightest supersymmetric particle is the top squark, (t) over tilde, which decays promptly into two quarks through R-parity-violating couplings. Top squarks with masses in the range 100 GeV < m((T) over tilde) < 410 GeV are excluded at 95% confidence level. If the decay is into a b-quark and a light quark, a dedicated selection requiring two b-tags is used to exclude masses in the ranges 100 GeV < m((t) over tilde) < 470 GeV and 480 GeV < m(<(t)over tilde>) < 610 GeV. Additional limits are set on the pair-production of massive colour-octet resonances. KW - Patron Distributions KW - Collicions KW - Extension KW - Squark KW - Supersymmetry KW - Color KW - Decay Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-225465 VL - 78 IS - 250 ER - TY - JOUR T1 - A search for resonances decaying into a Higgs boson and a new particle \(X\) in the \({XH}\) -> \({qqbb}\) final state with the ATLAS detector JF - Physics letters B N2 - A search for heavy resonances decaying into a Higgs boson (H) and a new particle (X) is reported, utilizing 36.1 fb(-1) of proton-proton collision data at root s = 13 TeV collected during 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider. The particle Xis assumed to decay to a pair of light quarks, and the fully hadronic final state XH -> q (q) over bar 'b (b) over bar is analysed. The search considers the regime of high XH resonance masses, where the X and H bosons are both highly Lorentz-boosted and are each reconstructed using a single jet with large radius parameter. A two-dimensional phase space of XH mass versus X mass is scanned for evidence of a signal, over a range of XH resonance mass values between 1 TeV and 4 TeV, and for X particles with masses from 50 GeV to 1000 GeV. All search results are consistent with the expectations for the background due to Standard Model processes, and 95% CL upper limits are set, as a function of XH and X masses, on the production cross-section of the XH -> q (q) over bar 'b (b) over bar resonance. (c) 2018 The Author(s). Published by Elsevier B.V. KW - Proton-Proton Collisions KW - Root-S=13 TEV KW - MASS Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-225435 VL - 779 ER - TY - THES A1 - Müller, Martin T1 - Abstimmbare Halbleiterlaser und schmalbandige Laserarrays mit verteilter lateraler Rückkopplung T1 - tunable semiconductor lasers and narrowband laser arrays with distributed lateral feedback N2 - Im Rahmen dieser Arbeit wurden zwei verschiedene Typen von Halbleiterlasern mit verteilter Rückkopplung (DFB-Laser) entwickelt. Die Laser basieren auf Rippenwellenleitern und verfügen zusätzlich über ein dazu senkrecht orientiertes Metallgitter. Der evaneszente Teil der im Rippenwellenleiter geführten Lichtwelle überlappt mit dem Gitter. Durch diese periodische Variation des effektiven Brechungsindex wird die verteilte Rückkopplung gewährleistet, was eine longitudinal monomodige Laseremission zur Folge hat. Beiden Lasertypen ist gemeinsam, dass der Herstellungsprozess auf einem vom Materialsystem unabhängigen Konzept basiert. Diese Tatsache ist von besonderem Interesse, da so entsprechende Laser für unterschiedlichste Wellenlängenbereiche gefertigt werden können, ohne hierfür neue Herstellungsverfahren zu entwickeln. Den ersten Schwerpunkt der Arbeit bilden Untersuchungen zu sog. abstimmbaren Lasern, deren Emissionswellenlänge innerhalb eines relativ großen Bereichs quasikontinuierlich einstellbar ist. Der Abstimmmechanismus kann mit dem Vernier-Prinzip erklärt werden. Der Laser besteht hierbei aus zwei gekoppelten Segmenten, die jeweils über eine Reihe von Moden (Modenkamm) verfügen. Der Abstand der Moden innerhalb eines Segments ist konstant, wohingegen die Modenabstände der beiden Segmente leicht unterschiedlich sind. Die Emissionswellenlänge des Lasers ist bestimmt durch den Überlapp zweier Moden aus den beiden Segmenten, wobei die Modenkämme so ausgelegt sind, dass gleichzeitig maximal ein Modenpaar überlappt. Eine kleine relative Verschiebung der beiden Modenkämme führt zu einer vergleichsweise großen Verschiebung der Emissionswellenlänge auf Grund des veränderten Überlapps. Die Modenkämme wurden durch spezielle DFB-Gitter, sog. binary superimposed gratings (BSG), realisiert, die, anders als bei konventionellen DFB-Lasern, für mehrere Bragg-Wellenlängen konstruktive Interferenz zulassen und erstmalig bei DFB-Lasern eingesetzt wurden. BSGs zeichnen sich durch sehr gute optische Eigenschaften bei gleichzeitig einfacher Herstellung aus. Zum Abstimmen der Wellenlänge wurde der Brechungsindex des Lasers gezielt durch den Injektionsstrom bzw. die Bauteiltemperatur verändert. Im Rahmen dieser Arbeit konnten abstimmbare Laser auf unterschiedlichen Materialsystemen (InGaAs/GaAs, GaInNAs/GaAs, InGaAsP/InP) hergestellt werden. Der maximale diskrete Abstimmbereich beträgt 38 nm bzw. 8,9 THz und ist durch die Breite des Verstärkungsspektrums limitiert. Quasikontinuierlich konnte ein Abstimmbereich von 15 nm bzw. 3,9 THz erreicht werden. Die typische minimale Seitenmodenunterdrückung (SMSR) beträgt 30 bis 35 dB. Durch Hinzufügen eines dritten Segments ohne Gitter konnte die Ausgangsleistung unabhängig von der Wellenlänge konstant gehalten werden. Den zweiten Schwerpunkt der Arbeit bildet die Entwicklung von DFB-Laser-Arrays mit dem Ziel, longitudinal monomodige Laser mit hoher Ausgangsleistung zu erhalten. Die DFB-Laser-Arrays basieren auf dem oben beschriebenen Prinzip von DFB-Lasern mit lateralem Metallgitter und verfügen über mehrere Rippenwellenleiter, die im lateralen Abstand von wenigen Mikrometern angeordnet sind. Für große Abstände zwischen den einzelnen Lasern des Arrays (Elemente) emittieren diese, weitgehend unabhängig von einander, jeweils longitudinal monomodiges Licht (quasimonochromatische Emission). Die spektrale Breite beträgt hierbei typischerweise 50 bis 70 GHz. Für kleine Elementabstände koppeln die einzelnen Lichtwellen miteinander, was zu einer mit einem konventionellen DFB-Laser vergleichbaren Linienbreite führt. Während die ungekoppelten Arrays über ein gaußförmiges Fernfeld verfügen, ergibt sich für die gekoppelten Arrays ein Interferenzmuster, das stark von verschiedenen Laserparametern (wie z. B. dem Elementabstand) abhängt. Bei InGaAs/GaAs basierenden Arrays (Wellenlänge ca. 980 nm) ergibt sich für DFB-Laser-Arrays mit vier Elementen eine Ausgangsleistung von ca. 200 mW pro Facette, die durch die Wärmeabfuhr begrenzt wird. Trotz der starken thermischen Limitierung (die Laser waren nicht aufgebaut) konnte die 3,5-fache Ausgangsleistung eines Referenzlasers erzielt werden. Bei InGaSb/GaSb basierenden Arrays mit vier Elementen (Wellenlänge ca. 2,0 µm) konnte eine Ausgangsleistung von ca. 30 mW pro Facette erreicht werden, was dem 3,3-fachen eines Referenzlasers entspricht. Die Verwendung von DFB-Laser-Arrays führt folglich zu einer signifikanten Leistungssteigerung, die sich durch geeignete Maßnahmen (Facettenvergütung, Montage, Skalierung) noch weiter erhöhen ließe. N2 - This thesis covers the development of two different types of semiconductor lasers with distributed feedback (DFB). The lasers are based on ridge waveguides and possess an additional metal grating that is oriented perpendicular to the ridge waveguide. The evanescent part of the guided light overlaps with the grating. Due to periodic modulation of the effective refractive index a distributed feedback is accomplished which leads to a longitudinal single mode laser emission. Both lasers have in common, that the manufacturing process is independent of the material system. This fact is of particular interest because one can easily fabricate lasers in different wavelength ranges without having to develop a new manufacturing process. The first part of the thesis covers investigations on tunable lasers. The emission wavelength can be tuned quasi continuous within a relatively large range. The tuning mechanism can be described by the Vernier effect. The laser consists of two coupled cavities, each having a series of well defined modes. The modes are equally spaced within a cavity, whereas the mode spacing between the two cavities is slightly different. The emission wavelength of the device is determined by the overlap of two modes from either cavity. By applying this concept, one can use a relatively small shift of the cavity modes to obtain a rather large shift of the emission wavelength of the laser. The mode spectra have been realized by using so called binary superimposed gratings (BSG). This allows constructive interference for several Bragg wavelengths. BSGs show excellent optical properties as well as an easy fabrication process and have been applied to DFB-lasers for the first time. The wavelength tuning is accomplished by a well directed way of varying the injection currents and the device temperature, respectively. In this thesis, tunable lasers have been demonstrated on a variety of material systems (InGaAs/GaAs, GaInNAs/GaAs, InGaAsP/InP). The maximum discrete tuning range is 38 nm and 8.9 THz, respectively and is limited by the width of the gain spectrum. The maximum quasi continuous tuning range is 15 nm and 3,9 THz, respectively. The typical minimum side mode suppression ratio (SMSR) is 30 to 35 dB. By adding a third segment without any grating, one can keep the output power at a constant level independent of the emission wavelength. The second part of this thesis covers the development of DFB laser arrays resulting in a laser source with high output power and small spectral width. The DFB laser arrays are based on the above described principle of a DFB laser with a lateral metal grating and consists of several parallel ridge waveguides with a lateral distance of a few microns. For a relatively large distance between two adjacent lasers (emitters) the lasers are independent, each emitting single mode light. The total spectral width is around 50 to 70 GHz. Regarding smaller distances between two emitters, light from adjacent lasers interacts which leads to a total spectral width comparable to a conventional DFB laser. Regarding an InGaAs/GaAs based DFB laser array (wavelength around 980 nm), an array with four emitters shows a maximum output power of around 200 mW. Despite the strong thermal limitation (the lasers were not mounted), this is 3.5 times the output power of a reference laser with only one emitter. Regarding the InGaSb/GaAs based DFB laser arrays with four emitters (wavelength around 2.0 µm) the output power is around 3.3 times as high as the output power of a reference device. This shows that the proposed concept of DFB laser arrays with lateral gratings is suitable to improve the output power of a DFB laser and can be further enhanced by means of facet coating, proper mounting and scaling. KW - DFB-Laser KW - Halbleiterlaser KW - DFB-Laser KW - Abstimmbare Laser KW - Laserarray KW - semiconductor lasers KW - dfb-laser KW - tunable laser KW - laser array Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-16922 ER - TY - THES A1 - Sauer, Christoph T1 - Accessing molecule-metal and hetero-molecular interfaces with direct and resonant photoelectron spectroscopy T1 - Untersuchung von Molekül/Metall- und heteromolekularen Grenzflächen mittels direkter und resonanter Photoelektronenspektroskopie N2 - This thesis consists of two parts of original experimental work, its evaluation, and in- terpretation. Its final goal is to investigate dynamical charge transfer (CT) at a hetero- molecular interface with resonant photoelectron spectroscopy (RPES). In order to achieve this goal preliminary studies have been necessary. First two hetero-molecular inter- faces that exhibit adequate structural properties as well as an appropriate photoelec- tron spectroscopy (PES) spectrum of the valence regime have been identified. The de- sired CT analysis with RPES of these hetero-molecular systems is then conducted on the basis of the knowledge gained by previous RPES studies of homo-molecular sys- tems. The characterization of hetero-molecular films on single crystal Ag surfaces in the first part of this thesis is performed with high resolution core level PES and valence PES. The reproduction of the core level PES data with reference spectra of homo-molecular films allows me to determine which molecule is in direct contact to the Ag surface and which one is situated in higher layers (not the first one). Due to the direct correspon- dence of core level and valence PES the assignment of features in the spectra of the latter technique can be achieved with the identification of the contributions extracted from the evaluation of the data of the former technique. It is found that the systems PTCDA on one monolayer (ML) of SnPc on Ag(111) and CuPc/1 ML PTCDA/Ag(111) are stable at 300 K which means that no significant layer exchange occurs for these systems. In contrast a vertical exchange of CuPc and PTCDA molecules is observed for PTCDA de- posited on top of 1 ML CuPc/Ag(111). Up to a coverage of approximately 0.5 ML of PTCDA molecules these diffuse into the first layer, replace CuPc molecules, and con- sequently force them into higher layers. Above a coverage of approximately 0.5 ML of PTCDA molecules these are also found in higher layers. The search for a promising system for the intended RPES study then leads to an investigation of hetero-molecular films with a combination of F4TCNQ and PTCDA molecules on Ag(110) within the same approach. Depositing F4TCNQ molecules onto a 1 ML PTCDA/Ag(110) film in the herringbone phase at 300 K results in an instable hetero-organic system which un- dergoes a layer exchange. Hereby PTCDA molecules in the first layer are replaced by F4TCNQ molecules similar to the behavior of the system PTCDA/1 ML CuPc/Ag(111). Switching the order of the preparation steps leads to a stable film of PTCDA/1.0 ML F4TCNQ/Ag(110) at 300 K. Among the stable hetero-molecular films only the system CuPc/1 ML PTCDA/Ag(111) exhibits the required wetting growth of the first two layers at 300 K and a valence PES spectrum with energetically separable molecular orbital signals in the same intensity range. Thus this system is identified to be appropriate for a detailed analysis with RPES. The unexpected findings of vertical exchanges in the hetero-molecular films at 300 K motivate a study of the behavior at elevated temperatures for all systems investigated before. Therein it is revealed that annealing 1.5 ML SnPc/1 ML PTCDA/Ag(111) and 1.0 ML PTCDA/1 ML SnPc/Ag(111) to a temperature above the desorption temperature of molecules not in direct contact to the Ag(111) surface results in a 1 ML SnPc/Ag(111) film in both cases. Hence at elevated temperatures (approximately above 420 K) SnPc molecules replace PTCDA molecules in the first layer on Ag(111). At higher temper- atures (approximately above 470 K) PTCDA molecules and SnPc molecules situated above the first layer then desorb from the 1 ML SnPc/Ag(111) sample. Annealing all hetero-molecular films with CuPc and PTCDA molecules on Ag(111) to 570 K leads to a sample with CuPc and PTCDA molecules in the first and only layer. Depending on the initial CuPc coverage different ratios of both molecules are obtained. With a CuPc coverage of exactly 1 ML, or above, films with PTCDA coverages of approxi- mately 0.1–0.2 ML are produced. So at elevated temperatures CuPc molecules replace PTCDA molecules in the first layer of the system CuPc/1 ML PTCDA/Ag(111). Anal- ogously the layer exchange at 300 K for the system PTCDA/1 ML CuPc/Ag(111) is reversed at elevated temperatures. In the case of SnPc and CuPc coverages below 1 ML annealing vertical hetero-molecular systems with PTCDA on Ag(111) up to 570 K re- sults in a single layer of mixed hetero-molecular films with lateral long range order. In this way the system CuPc + PTCDA/Ag(111) is prepared and then characterized as a proper system for a detailed analysis with RPES. Additional annealing experiments of hetero-organic films consisting of F4TCNQ and PTCDA molecules on Ag(110) with an F4TCNQ coverage of 1.0 ML (and above) end in a submonolayer (sub-ML) film of F4TCNQ/Ag(110) that exhibits a contribution of amorphous carbon. Consequently, it can be concluded that at elevated temperatures part of the F4TCNQ molecules decom- pose. In the second part of this thesis homo-molecular multilayer samples and (sub-)ML films on single crystalline metal surfaces are investigated with RPES in order to enable the final RPES study of vertical and lateral hetero-molecular interface systems. First a pho- ton energy (hν) dependent intensity variation of (groups of) molecular orbital signals of exemplary multilayer films (NTCDA and coronene) is studied and explained on the basis of the local character of the electronic transitions in near edge x-ray absorption fine structure (NEXAFS) spectroscopy in combination with the real space probability den- sity of the contributing molecular orbitals. This simple approach is found to be able to correctly describe relative intensity variations by orders of magnitude while it fails for hν dependent relative intensity changes in the same order of magnitude. After that the hν dependent line-shape evolution of an energetically separated molecular orbital signal of a CuPc multilayer is discussed in relation to small molecules in the gas phase and explained with an effect of electron vibration coupling. Through a comparison of the hν dependent line-shape evolution of the highest occupied molecular orbital (HOMO) of a CuPc with a SnPc multilayer the molecule specific character of this effect is identified. Then the same effect with either two (or more) electronic transitions or multiple coupling vibrational modes is observed for a coronene multilayer. Thereafter the influence of the adsorption on metal surfaces on this effect is studied and discussed with special emphasis on a possible contribution by features which are related to dynamical interface CT. For a sub-ML of SnPc/Au(111) no variation with respect to a SnPc multilayer film is detected while for a sub-ML of CuPc/Au(111) less intensity is distributed into the high binding energy (EB) part of the HOMO signal with respect to the corresponding multilayer film. In the RPES data of a sub-ML of coronene/Ag(111) a resonance specific variation of the hν dependent line-shape evolution of the HOMO signal is found by the revelation of a change of this effect with respect to the coronene multilayer data in only one of the two NEXAFS resonances. All these findings are consistently explained within one effect and a common set of parameters, namely all quantities that characterize the potential energy surfaces involved in the RPES process. Through that an alternative explanation that re- lies on dynamical CT can be excluded which influences the following CT analysis with RPES. Three criteria for such an analysis of dynamical interface CT with RPES are identified. In the system coronene on Ag(111) a low EB feature is related to metal-molecule inter- face CT through the assignment of a particular final state and hence named CT state. In the EB region of the frontier molecular orbital signals of the molecule-metal inter- face systems with a signal from the lowest unoccupied molecular orbital (LUMO) in direct valence PES a broad line-shape is measured in RPES. This finding is related to interface CT by a possible explanation that emerges through the comparison to the line- shape of the CT state. The constant kinetic energy (EK ) features detected for several molecule-metal interfaces constitute the third criterion for a CT analysis with RPES. For the molecule-metal interface systems without a LUMO signal in direct valence PES the energy of these features can be calculated with the assignment of the responsible decay channel in combination with explicitly given simplifying assumptions. Through that the involvement of metal-molecule interface CT in the generation of these constant EK fea- tures is demonstrated. The RPES data of the lateral and the vertical hetero-molecular interface, identified in the first part, is then scanned for these three CT criteria. Thereby neither for the lateral hetero-molecular system CuPc + PTCDA/Ag(111) nor for the verti- cal hetero-molecular system CuPc/1 ML PTCDA/Ag(111) dynamical hetero-molecular interface CT can be confirmed. In the former system the molecule-metal interface in- teraction is found to dominate the physics of the system in RPES while in the latter system no hints for a significant hybridization at the CuPc-PTCDA interface can be revealed N2 - Diese Dissertation besteht aus zwei Hauptteilen, in denen neue experimentelle Ergeb- nisse präsentiert, ausgewertet und interpretiert werden. Das Ziel dieser Arbeit ist es, dynamischen Ladungstransfer an einer Heteroorganikgrenzfläche mit resonanter Pho- toelektronenspektroskopie (RPES) zu untersuchen. Um dies zu ermöglichen, musste erst eine solche Heteroorganikgrenzfläche, mit den geforderten strukturellen Eigenschaften, gefunden werden, die außerdem noch ein geeignetes Spektrum des Valenzbereichs in direkter Photoelektronenspektroskopie (PES) aufweist. Zusätzlich erforderte die ange- strebte Ladungstransferanalyse mit RPES vorausgehende RPES Messungen an homo- molekularen Systemen. Das dadurch erlangte Wissen konnte dann für die Interpretation von RPES Messungen heteromolekularer Grenzflächenschichten benutzt werden. Der erste Teil dieser Arbeit befasst sich mit der Charakterisierung von heteromolekularen Filmen auf Silbereinkristalloberflächen durch hochauflösende PES der Rumpfzustände und PES der Valenzzustände. Die Reproduktion der Spektren der Rumpfzustände mit PES Referenzspektren homomolekularer Filme ermöglicht es herauszufinden welches Molekül direkt auf der Silberoberfläche liegt und welches in höheren Lagen (nicht der ersten) adsorbiert ist. Außerdem können dadurch Signale in PES Spektren des Valenzbe- reiches gewissen Zuständen zugeordnet werden, da ein direkter Zusammenhang von PES der Rumpfzustände und der Valenzzustände existiert. Dieser wiederum ermöglicht es, durch die Analyse der Daten der Rumpfzustände, herauszufinden, welche Beiträge im Spektrum des Valenzbereichs enthalten sein müssen. Mit der Analyse der PES Spektren der Rumpfzustände wird gezeigt, dass die Systeme PTCDA auf einer Monolage (ML) SnPc auf Ag(111) und CuPc/1 ML PTCDA/Ag(111) bei 300 K stabil sind. Somit kann ein signifikanter Austausch von Molekülen zwischen den beiden Lagen dieser vertikalen Heteroschichten ausgeschossen werden. Dampft man hingegen PTCDA Moleküle auf eine 1 ML CuPc/Ag(111) Schicht auf, so wird ein Austausch von CuPc Molekülen mit PTCDA Molekülen beobachtet. Für eine PTCDA Bedeckung von bis zu 0.5 ML diffundieren alle PTCDA Moleküle in die erste Lage, ersetzen die dort befindlichen CuPc Moleküle und zwingen diese in höhere Lagen. Oberhalb einer PTCDA Bedeckung von 0.5 ML adsorbieren diese Moleküle auch in höheren Lagen. Um weitere Systeme zu finden, die für die geplanten RPES Messungen geeignet sind, werden anschließend ebenfalls heteromolekulare Filme, bestehend aus F4TCNQ und PTCDA Molekülen auf Ag(110), mit der gleichen Methode untersucht. Ähnlich dem Verhalten des Systems PTCDA/1 ML CuPc/Ag(111) wird hierbei ein Austausch von PTCDA Molekülen durch F4TCNQ Moleküle in der ersten Lage des Systems F4TCNQ/1 ML PTCDA/Ag(110) beobachtet. Kehrt man die Präparationsreihenfolge hingegen um, kann bei 300 K ein sta- biler Film von PTCDA/1.0 ML F4TCNQ/Ag(110) erzeugt werden. Das System CuPc auf 1 ML PTCDA/Ag(111) wird als einziges stabiles heteromolekulares System identifiziert, welches sowohl bei 300 K das benötigte benetzende Wachstum der ersten beiden Lagen, als auch ein PES Spektrum des Valenzbereichs mit energetisch trennbaren Molekülor- bitalsignalen im gleichen Intensitätsbereich aufweist. Somit ist gezeigt, dass dieses Sys- tem für eine detaillierte Analyse mit RPES geeignet ist. Der unerwartete Befund, dass bei einigen heteromolekularen Filmen ein vertikaler Aus- tausch stattfindet, motiviert eine Studie des Verhaltens aller heteromolekularen Filme bei höheren Temperaturen. Dabei wird gezeigt, dass ein 1 ML SnPc/Ag(111) Film entsteht, wenn eine 1.5 ML SnPc/1 ML PTCDA/Ag(111) und eine 1.0 ML PTCDA/1 ML SnPc/Ag(111) Probe auf eine Temperatur erhitzt werden, bei der Moleküle, welche nicht direkt auf der Ag(111) Oberfläche adsorbiert sind, desorbieren. Bei erhöhter Tempera- tur (oberhalb ca. 420 K) verdrängen also SnPc Moleküle PTCDA Moleküle aus der ersten Lage auf der Ag(111) Oberfläche. Wird die Temperatur weiter erhöht (ober- halb ca. 470 K), so desorbieren PTCDA und SnPc Moleküle, welche sich nicht in der ersten Lage befinden, von dem entstandenen 1 ML SnPc/Ag(111) Film. Das Er- hitzen aller heteromolekularen Filme, die aus PTCDA und CuPc Molekülen bestehen, auf eine Endtemperatur von 570 K resultiert in einer Probe, bei der sowohl CuPc als auch PTCDA Moleküle in der ersten, und einzigen Lage, adsorbiert sind. Abhängig von der anfänglichen CuPc Bedeckung entstehen verschiedene Verhältnisse der bei- den Moleküle. Eine anfängliche CuPc Bedeckung von genau einer ML, oder darüber, führt zu einem Film mit einer PTCDA Bedeckung von ca. 0.1–0.2 ML. Aus den Heiz- experimenten am System CuPc/1 ML PTCDA/Ag(111) folgt also, dass bei erhöhten Temperaturen CuPc Moleküle den Platz von PTCDA Molekülen in der ersten Lage einnehmen. Gleichermaßen wird der Austausch, der für das System PTCDA/1 ML CuPc/Ag(111) bei 300 K erfolgt ist, wieder rückgängig gemacht. Das Erhitzen einer heteromolekularen Probe mit PTCDA Molekülen und SnPc bzw. CuPc Bedeckungen unterhalb einer ML auf 570 K resultiert in einer gemischten heteromolekularen ML, die eine langreichweitige laterale Ordnung besitzt. Auf diese Art und Weise kann das System CuPc + PTCDA/Ag(111) präpariert werden. Die Charakterisierung dieses Systems zeigt, dass es sich für eine detaillierte Analyse mit RPES eignet. In weiteren Experimenten werden heteromolekulare Filme, bestehend aus F4TCNQ und PTCDA Molekülen auf Ag(110) mit einer F4TCNQ Bedeckung von 1.0 ML, und darüber, erhitzt. Hierbei wer- den Submonolagenfilme von F4TCNQ auf Ag(110) erzeugt, die zusätzlich noch amor- phen Kohlenstoff enthalten. Daraus lässt sich schließen, dass ein Teil der F4TCNQ Moleküle beim Erhitzen auf diese Temperaturen zersetzt werden. Im zweiten Teil dieser Arbeit werden homomolekulare Multilagen-, Monolagen und Submololagenfilme auf einkristallinen Metalloberflächen mit RPES untersucht, um die dadurch erlangten Ergebnisse auf RPES Messungen an heteromolekularen Filmen anzu- wenden. Als erstes wird anhand von Messungen an Multilagenfilmen zweier Modell- moleküle (NTCDA und Coronen) die Abhängigkeit der Intensitätsvariation (einer Grup- pe) von Molekülorbitalsignalen von der Photonenenergie (hν) untersucht. Die gewon- nenen Daten werden durch den lokalen Charakter der elektronischen Übergänge in der Nahkantenröntgenabsorptionsfeinstrukturspektroskopie (NEXAFS) und der Realraum- wahrscheinlichkeitsdichte der beitragenden Molekülorbitale erklärt. Mit diesem ver- einfachten Denkansatz können relative Intensitätsvariationen über Größenordnungen be-schrieben werden, bei relativen Veränderungen der Intensität innerhalb der selben Grö- ßenordnung versagt diese Erklärung allerdings. Daraufhin wird die hν Abhängigkeit der Linienformentwicklung von einem energetisch trennbaren Molekülorbitalsignal einer CuPc Multilage im Vergleich zu kleinen Molekülen in der Gasphase diskutiert und auf einen Effekt der Kopplung von Vibrationen an elektronische Übergänge zurückgeführt. Ein anschließender Vergleich dieser hν Abhängigkeit der Linienformentwicklung des höchsten besetzten Molekülorbitals (HOMO) von CuPc und SnPc Multilagen offen- bart den molekülspezifischen Charakter dieses Effekts. Danach wird gezeigt, dass für eine Multilage Coronen der selbe Effekt, allerdings mit der Beteiligung zweier (oder mehrerer) elektronischer Übergänge oder aneinander koppelnder Vibrationsmoden, zu sehen ist. Im Anschluss wird der Einfluss durch die Adsorption auf einer Metallober- fläche auf diesen Effekt untersucht und im Hinblick auf eine mögliche Beteiligung von Signalen diskutiert, in deren Entstehung Ladungstransfer beteiligt ist. Der Vergleich der RPES Messung eines Submonolagenfilms von SnPc auf Au(111) und den entsprechen- den Daten einer SnPc Multilage zeigt keinerlei sichtbare Veränderung. Demgegenüber wird für eine Submonolage CuPc auf Au(111) eine verminderte Intensitätsumverteilung in den Teil größerer Bindungsenergie (EB) des HOMO, im Vergleich zur einer CuPc Multilage, festgestellt. Vergleicht man die RPES Daten von einer Submonolage Coro- nen/Ag(111) mit denen des entsprechenden Multilagenfilms, erkennt man eine reso- nanzspezifische Veränderung der hν Abhängigkeit der Linienformentwicklung, da sich nur in einer der beiden NEXAFS Resonanzen eine Veränderung dieses Effekts zwischen dem Submonolagen- und dem Multilagenfilm zeigt. Alle diese experimentellen Be- funde können mit einem einzigen Effekt und einem gemeinsamen Parametersatz erklärt werden. Dies sind alle Parameter, die benötigt werden, um die Potentialenergieober- flächen zu beschreiben, welche im RPES Prozess involviert sind. Dadurch kann eine Alternativerklärung, die auf dynamischem Ladungstransfer beruht, ausgeschlossen wer- den, was wiederum die folgende Ladungstransferanalyse mit RPES entscheidend beein- flusst. Eine solche Ladungstransferanalyse mit RPES kann durch den Nachweis von drei ver- schiedenen mit dynamischem Ladungstransfer assoziierten Signalen durchgeführt wer- den. Ein in den RPES Daten von einer Submonolage Coronen/Ag(111) detektiertes Sig- nal bei niedriger EB kann, durch die Zuordnung eines spezifischen Endzustandes, mit Ladungstransfer über die Grenzfläche zwischen Molekül und Metall hinweg in Verbin- dung gebracht werden. Folglich wird dieses Signal Ladungstransferzustand genannt. Im EB Bereich der am schwächsten gebundenen Molekülorbitalsignale zeigen RPES Messungen eine verbreiterte Linienform für diejenigen Molekülmetallgrenzflächensys- teme, welche ein Signal des niedrigsten unbesetzten Molekülorbitals (LUMO) in di- rekter PES aufweisen. Durch den Vergleich mit der Linienform des Ladungstransfer- zustandes kann eine mögliche Erklärung für diesen experimentellen Befund entwickelt werden, die diesen mit Ladungstransfer in Verbindung bringt. Als drittes Signal, das für eine Ladungstransferanalyse mit RPES herangezogen werden kann, dienen Signale konstanter kinetische Energie (EK ), welche sich in den RPES Daten einiger Molekül- metallgrenzflächensysteme zeigen. Die gemessene Energie dieser Signale kann für die Molekülmetallgrenzflächensysteme, welche kein Signal des LUMO in direkter PES auf- weisen, durch die Zuordnung des verantwortlichen Zerfallskanals und explizit ange- führte Vereinfachungen erfolgreich berechnet werden. Dadurch wird die Beteiligung von Ladungstransfer über die Grenzfläche zwischen Molekül und Metall im Erzeugungspro- zess dieser Signale konstanter EK gezeigt. In den RPES Daten der lateralen und ver- tikalen heteromolekularen Grenzflächensysteme, die im ersten Teil dieser Arbeit identi- fiziert wurden, wird dann letztendlich nach einem Beitrag dieser drei mit Ladungstrans- fer assoziierten Signale gesucht. Weder für das laterale heteromolekulare System CuPc + PTCDA/Ag(111) noch für das vertikale heteromolekulare System CuPc auf 1 ML PTCDA/Ag(111) kann, durch die Detektion eines dieser Signale, Ladungstransfer ent- lang der heteromolekularen Grenzfläche bestätigt werden. Als entscheidender Faktor für die physikalische Beschreibung von RPES am ersten System wird die Wechselwirkung zwischen Molekül und Metall identifiziert. Das zentrale Ergebnis für das zweite Sys- tem ist, dass keine Hinweise auf eine signifikante Hybridisierung an der Grenzfläche zwischen CuPc und PTCDA entdeckt werden können. KW - Organisches Molekül KW - resonant photoelectron spectroscopy KW - molecule-metal interfaces KW - heteromolecular interfaces KW - photoelectron spectroscopy KW - Adsorptionsschicht KW - Photoelektronenspektroskopie KW - Röntgen-Photoelektronenspektroskopie Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-107928 ER - TY - THES A1 - Weber, Manuel T1 - Action-based quantum Monte Carlo approach to fermion-boson models T1 - Wirkungsbasierte Quanten-Monte-Carlo-Methoden für Fermion-Boson-Modelle N2 - This work deals with the development and application of novel quantum Monte Carlo methods to simulate fermion-boson models. Our developments are based on the path-integral formalism, where the bosonic degrees of freedom are integrated out exactly to obtain a retarded fermionic interaction. We give an overview of three methods that can be used to simulate retarded interactions. In particular, we develop a novel quantum Monte Carlo method with global directed-loop updates that solves the autocorrelation problem of previous approaches and scales linearly with system size. We demonstrate its efficiency for the Peierls transition in the Holstein model and discuss extensions to other fermion-boson models as well as spin-boson models. Furthermore, we show how with the help of generating functionals bosonic observables can be recovered directly from the Monte Carlo configurations. This includes estimators for the boson propagator, the fidelity susceptibility, and the specific heat of the Holstein model. The algorithmic developments of this work allow us to study the specific heat of the spinless Holstein model covering its entire parameter range. Its key features are explained from the single-particle spectral functions of electrons and phonons. In the adiabatic limit, the spectral properties are calculated exactly as a function of temperature using a classical Monte Carlo method and compared to results for the Su-Schrieffer-Heeger model. N2 - Die vorliegende Arbeit beschäftigt sich mit der Entwicklung und Anwendung neuer Quanten-Monte-Carlo-Methoden zur Simulation von Fermion-Boson-Modellen. Grundlage für unsere Entwicklungen ist der Pfadintegralformalismus, in dem das exakte Ausintegrieren der bosonischen Freiheitsgrade zu einer retardierten fermionischen Wechselwirkung führt. Wir geben einen Überblick über drei Methoden, die für die Simulation retardierter Wechselwirkungen geeignet sind. Insbesondere entwickeln wir eine neue Quanten-Monte-Carlo-Methode mit globalen Updates, die das Autokorrelationsproblem früherer Ansätze löst und linear in der Systemgröße skaliert. Wir demonstrieren die Effizienz dieser Methode am Beispiel des Peierls-Übergangs im Holstein-Modell und diskutieren Erweiterungen auf andere Fermion-Boson-Modelle sowie Spin-Boson-Modelle. Des Weiteren zeigen wir, wie mithilfe erzeugender Funktionale bosonische Observablen direkt aus den Monte-Carlo-Konfigurationen berechnet werden können. Dies beinhaltet unter anderem den Boson-Propagator und die spezifische Wärme des Holstein-Modells. Die methodischen Entwicklungen dieser Arbeit erlauben es uns, die spezifische Wärme des spinlosen Holstein-Modells in seinem gesamten Parameterbereich zu untersuchen. Ihre wesentlichen Merkmale werden mithilfe der Einteilchenspektralfunktionen von Elektronen und Phononen erklärt. Im adiabatischen Grenzfall verwenden wir eine klassische Monte-Carlo-Methode, um die Temperaturabhängigkeit der Spektralfunktionen exakt zu berechnen, und vergleichen unsere Ergebnisse für das Holstein-Modell mit Resultaten für das Su-Schrieffer-Heeger-Modell. KW - Monte-Carlo-Simulation KW - Elektron-Phonon-Wechselwirkung KW - Peierls-Übergang KW - Thermodynamik KW - Pfadintegral KW - quantum Monte Carlo KW - Holstein model KW - specific heat KW - one-dimensional systems KW - Quanten-Monte-Carlo KW - Holstein-Modell KW - Spezifische Wärme KW - eindimensionale Systeme Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-157643 ER - TY - THES A1 - Pfeifer, Thomas T1 - Adaptive control of coherent soft X-rays T1 - Adaptive Kontrolle kohärenter weicher Röntgenstrahlung N2 - The availability of coherent soft x-rays through the nonlinear optical process of high-harmonic generation allows for the monitoring of the fastest events ever observed in the laboratory. The attosecond pulses produced are the fundamental tool for the time-resolved study of electron motion in atoms, molecules, clusters, liquids and solids in the future. However, in order to exploit the full potential of this new tool it is necessary to control the coherent soft x-ray spectra and to enhance the efficiency of conversion from laser light to the soft x-ray region in the harmonic-generation process. This work developed a comprehensive approach towards the optimization of the harmonic generation process. As this process represents a fundamental example of \emph{light}--\emph{matter} interaction there are two ways of controlling it: Shaping the generating laser \emph{light} and designing ideal states of \emph{matter} for the conversion medium. Either of these approaches was closely examined. In addition, going far beyond simply enhancing the conversion process it could be shown that the qualitative spectral response of the process can be modified by shaping the driving laser pulse. This opens the door to a completely new field of research: Optimal quantum control in the attosecond soft x-ray region---the realm of electron dynamics. In the same way as it is possible to control molecular or lattice vibrational dynamics with adaptively shaped femtosecond laser pulses these days, it will now be feasible to perform real-time manipulation of tightly bound electron motion with adaptively shaped attosecond light fields. The last part of this work demonstrated the capability of the herein developed technique of coherent soft-x-ray spectral shaping, where a measured experimental feedback was used to perform a closed-loop optimization of the interaction of shaped soft x-ray light with a sulfur hexafluoride molecule to arrive at different control objectives. For the optimization of the high-harmonic-generation process by engineering the conversion medium, both the gas phase and the liquid phase were explored both in experiment and theory. Molecular media were demonstrated to behave more efficiently than commonly used atomic targets when elliptically polarized driving laser pulses are applied. Theory predicted enhancement of harmonic generation for linearly polarized driving fields when the internuclear distance is increased. Reasons for this are identified as the increased overlap of the returning electron wavefunction due to molecular geometry and the control over the delocalization of the initial electronic state leading to less quantum-mechanical spreading of the electron wavepacket during continuum propagation. A new experimental scheme has been worked out, using the method of molecular wavepacket generation as a tool to enhance the harmonic conversion efficiency in `pump--drive' schemes. The latter was then experimentally implemented in the study of high-harmonic generation from water microdroplets. A transition between the dominant laser--soft-x-ray conversion mechanisms could be observed, identifying plasma-breakdown as the fundamental limit of high-density high-harmonic generation. Harmonics up to the 27th order were observed for optimally laser-prepared water droplets. To control the high-harmonic generation process by the application of shaped laser light fields a laser-pulse shaper based on a deformable membrane mirror was built. Pulse-shape optimization resulted in increased high-harmonic generation efficiency --- but more importantly the qualitative shape of the spectral response could be significantly modified for high-harmonic generation in waveguides. By adaptive optimization employing closed-loop strategies it was possible to selectively generate narrow (single harmonics) and broad bands of harmonic emission. Tunability could be demonstrated both for single harmonic orders and larger regions of several harmonics. Whereas any previous experiment reported to date always produced a plateau of equally intense harmonics, it has been possible to demonstrate ``untypical'' harmonic soft x-ray spectra exhibiting ``switched-off'' harmonic orders. The high degree of controllability paves the way for quantum control experiments in the soft x-ray spectral region. It was also demonstrated that the degree of control over the soft x-ray shape depends on the high-harmonic generation geometry. Experiments performed in the gas jet could not change the relative emission strengths of neighboring harmonic orders. In the waveguide geometry, the relative harmonic yield of neighboring orders could be modified at high contrast ratios. A simulation based solely on the single atom response could not reproduce the experimentally observed contrast ratios, pointing to the importance of propagation (phase matching) effects as a reason for the high degree of controllability observed in capillaries, answering long-standing debates in the field. A prototype experiment was presented demonstrating the versatility of the developed soft x-ray shaping technique for quantum control in this hitherto unexplored wavelength region. Shaped high-harmonic spectra were again used in an adaptive feedback loop experiment to control the gas-phase photodissociation reaction of SF$_6$ molecules. A time-of-flight mass spectrometer was used for the detection of the ionic fragments. The branching ratios of particular fragmentation channels could be varied by optimally shaped soft x-ray light fields. Although in one case only slight changes of the branching ratio were possible, an optimal solution was found, proving the sufficient technical stability of this unique coherent soft-x-ray shaping method for future applications in optimal control. Active shaping of the spectral amplitude in coherent spectral regions of $\sim$10~eV bandwidth was shown to directly correspond to shaping the temporal features of the emerging soft x-ray pulses on sub-femtosecond time scales. This can be understood by the dualism of frequency and time with the Fourier transformation acting as translator. A quantum-mechanical simulation was used to clarify the magnitude of temporal control over the shape of the attosecond pulses produced in the high-harmonic-generation process. In conjunction with the experimental results, the first attosecond time-scale pulse shaper could thus be demonstrated in this work. The availability of femtosecond pulse shapers opened the field of adaptive femtosecond quantum control. The milestone idea of closed-loop feedback control to be implemented experimentally was expressed by Judson and Rabitz in their seminal work titled ``Teaching lasers to control molecules''. This present work extends and turns around this statement. Two fundamentally new achievements can now be added, which are ``Teaching molecules to control laser light conversion'' and ``Teaching lasers to control coherent soft x-ray light''. The original idea thus enabled the leap from femtosecond control of molecular dynamics into the new field of attosecond control of electron motion to be explored in the future. The \emph{closed}-loop approach could really \emph{open} the door towards fascinating new perspectives in science. Coming back to the introduction in order to close the loop, let us reconsider the analogy to the general chemical reaction. Photonic reaction control was presented by designing and engineering effective media (catalysts) and controlling the preparation of educt photons within the shaped laser pulses to selectively produce desired photonic target states in the soft x-ray spectral region. These newly synthesized target states in turn could be shown to be effective in the control of chemical reactions. The next step to be accomplished will be the control of sub-femtosecond time-scale electronic reactions with adaptively controlled coherent soft x-ray photon bunches. To that end a time-of-flight high-energy photoelectron spectrometer has recently been built, which will now allow to directly monitor electronic dynamics in atomic, molecular or solid state systems. Fundamentally new insights and applications of the nonlinear interaction of shaped attosecond soft x-ray pulses with matter can be expected from these experiments. N2 - Die Verfügbarkeit kohärenter weicher Röntgenstrahlung durch den nichtlinear-optischen Prozess der Erzeugung hoher Harmonischer von Laserstrahlung erlaubt es, die schnellsten jemals im Labor beobachteten Ereignisse in ihrem Ablauf zu verfolgen. Die in diesem Prozess erzeugten Attosekundenpulse stellen das wichtigste Werkzeug dar, um in Zukunft die zeitaufgelöste Elektronenbewegung in Atomen, Molekülen, Clustern, Flüssigkeiten und Festkörpern zu untersuchen. Um jedoch das volle Potential dieses Werkzeugs zu nutzen, ist es notwendig, den Prozess der Erzeugung hoher Harmonischer in einer Weise zu optimieren, die es ermöglicht, zum einen gezielt Einfluss auf die Eigenschaften der kohärenten weichen Röntgenspektren zu nehmen und zum anderen die Konversionseffizienz bei der Umwandlung von Laserlicht in harmonische Strahlung zu erhöhen. In dieser Arbeit wurde eine umfassende Herangehensweise an das Problem der Optimierung des Erzeugungsprozesses der hohen Harmonischen Strahlung entwickelt. Da der Prozess ein fundamentales Beispiel einer Licht-Materie-Wechselwirkung darstellt, gibt es genau zwei Möglichkeiten, ihn zu kontrollieren: Die Formung des erzeugenden Laser\emph{lichtes} und die Entwicklung idealer \emph{Materie}zustände als Konversionsmedien. Beide Möglichkeiten wurden im Rahmen dieser Arbeit gründlich untersucht. Zusätzlich zur bloßen Steigerung der Ausbeute an Hoher-Harmonischer-Strahlung konnte darüber hinaus gezeigt werden, dass es möglich ist, die Spektren der erzeugten kohärenten weichen Röntgenstrahlung durch geformte Laserpulse qualitativ zu modifizieren. Dies eröffnet Möglichkeiten für ein grundlegend neues Forschungsgebiet: Optimale Quantenkontrolle im Attosekunden- und weichen Röntgenbereich---dem Bereich elektronischer Dynamik. Auf die gleiche Art und Weise wie es heutzutage möglich ist, Molekül- oder Gitterschwingungsdynamik mit adaptiv geformten Femtosekundenpulsen zu kontrollieren, sind wir ab jetzt in der Lage, mit adaptiv geformten Attosekunden-Lichtfeldern die Bewegung von fest gebundenen Elektronen in Echtzeit zu beeinflussen. Im letzten Teil dieser Arbeit wird das Potential der hierin entwickelten Methode der Formung kohärenter weicher Röntgenspektren demonstriert, indem ein gemessenes experimentelles Rückkopplungssignal benutzt wurde, um eine `closed-loop' Optimierung der Wechselwirkung von geformtem weichen Röntgenlicht mit Schwefelhexafluoridmolekülen für unterschiedliche Kontrollziele durchzuführen. Im Hinblick auf die Entwicklung und Anpassung des Konversionsmediums zur Optimierung des Prozesses der Erzeugung hoher Harmonischer wurden sowohl die Gas- als auch die Flüssigphase sowohl im Experiment als auch in der Theorie erforscht. Es wurde gezeigt, dass molekulare Medien sich effizienter als Atome verhalten, wenn der erzeugungende Laserpuls elliptisch polarisiert ist. In einer theoretischen Untersuchung wird eine Zunahme der Konversionseffizienz für linear polarisierte Erzeugungspulse erwartet wenn der Kernabstand vergrößert wird. Gründe dafür sind zum einen die Zunahme des Überlapps der zum Atom zurückkehrenden Wellenfunktion des Elektrons wegen der Molekülgeometrie. Zum anderen ermöglicht die Variation des Kernabstands die Kontrolle über die Delokalisation des elektronischen Anfangszustands, die zu einem verminderten quantenmechanischen Zerlaufen des Wellenpakets während seiner Propagation im Kontinuum führt. Eine neuartige experimentelle Methode wurde ausgearbeitet, die sich die Technik der Erzeugung molekularer Wellenpakete als Werkzeug zunutze macht, um die Konversionseffizienz der harmonischen Strahlung in einem so genannten `pump--drive' Verfahren zu erhöhen. Dieses wurde dann in einer Untersuchung der Erzeugung hoher Harmonischer an Wasser-Mikrotropfen experimentell implementiert. Dadurch konnte ein Übergang zwischen den beiden dominanten Mechanismen der Umwandlung von Laserstrahlung in weiches Röntgenlicht beobachtet werden, der den Plasma-Durchbruch als die natürliche Grenze bei der Erzeugung von hohen Harmonischen in hochdichten Medien identifizierte. Harmonische bis hin zur 27sten Ordnung wurden für optimal durch den Laser präparierte Wassertropfen nachgewiesen. Um den Prozess der Erzeugung hoher Harmonischer durch geformte Lichtfelder zu kontrollieren, wurde ein auf einem deformierbaren Membranspiegel basierender Laserpulsformer aufgebaut. Mittels Pulsformoptimierung war es ebenfalls möglich, eine Erhöhung der harmonischen Erzeugungseffizienz zu erzielen---wichtiger jedoch: Es konnte die qualitative Form der erzeugten kohärenten weichen Röntgenspektren signifikant modifiziert werden. Durch adaptive Optimierung unter Anwendung von `closed-loop' Strategien war es möglich, selektiv schmal- (einzelne harmonische Ordnungen) und breitbandige harmonische Spektren zu erzeugen. Durchstimmbarkeit wurde demonstriert sowohl für einzelne Harmonische als auch für größere zusammenhängende Bereiche mehrerer harmonischer Ordnungen. Während in allen bislang durchgeführten Experimenten ein Plateau gleichintensiver harmonischer Ordnungen beobachtet wurde, ist es jetzt zum ersten Mal gelungen, ``untypische'' weiche Röntgenspektren zu generieren, bei denen einzelne harmonische Ordnungen ``ausgeschaltet'' sind. Der hohe Grad der Kontrollierbarkeit bereitet den Weg für Experimente zur Quantenkontrolle im weichen Röntgenbereich. Es wurde ebenso gezeigt, dass der Grad der Kontrolle über die Form der weichen Röntgenspektren von der Erzeugungsgeometrie des Umwandlungsprozesses abhängt. In Experimenten zur Umwandlung im Gasstrahl war es nicht möglich die relative Emissionsstärke benachbarter harmonischer Ordnungen zu verändern. Im Gegensatz dazu konnte in der Wellenleitergeometrie die relative Ausbeute benachbarter Ordnungen mit hohem Kontrastverhältnis modifiziert werden. Eine auf der Antwort eines einzelnen Atoms beruhende Simulation konnte die experimentell beobachteten Kontrastverhältnisse nicht ausreichend reproduzieren: Ein Hinweis auf den Einfluss von Propagationseffekten (Phasenanpassung) als Ursache des in Wellenleitern beobachteten hohen Grades an Kontrollierbarkeit, was offene Debatten auf diesem Feld beantwortet. Um das Anwendungspotential der entwickelten Technik zur Formung kohärenter weicher Röntgenspektren im Hinblick auf Quantenkontrollexperimente in der entspechenden diesbezüglich bislang unerforschten Wellenlängenregion aufzuzeigen, wurde ein Prototypexperiment durchgeführt. Hier wurden wiederum mittels adaptiver Rückkopplungsschleife die nun formbaren Röntgenspektren dazu eingesetzt, die Photodissoziationsreaktion von SF$_6$-Molekülen in der Gasphases zu kontrollieren. Ein Flugzeitmassenspektrometer wurde zur Detektion der ionischen Fragmente herangezogen. Das Verzweigungsverhältnis einzelner Fragmentationskanäle konnte durch den Einfluss optimal geformter weicher Röntgenfelder variiert werden. Obwohl in einem Fall nur eine leichte Veränderung möglich war, konnte eine optimale Lösung gefunden werden, wodurch die ausreichende technische Stabilität dieser einzigartigen Methode zur Formung kohärenter weicher Röntgenstrahlung für zukünftige Anwendungen auf dem Gebiet der optimalen Kontrolle bewiesen wurde. Es wurde ferner darauf eingegangen, dass aktive Formung der spektralen Amplitude in kohärenten Spektren von $\sim$10~eV Bandbreite in direktem Zusammenhang steht mit der Formung zeitlicher Eigenschaften der entstehenden weichen Röntgenpulsen auf einer Subfemtosekundenzeitskala. Dies kann durch den Frequenz-Zeit-Dualismus verstanden werden, in dem die Fouriertransformation als Übersetzer fungiert. Eine quantenmechanische Simulation wurde durchgeführt, um das Ausmaß der zeitlichen Kontrolle über die Attosekundenpulsform beim Umwandlungsprozess näher zu beleuchten. Zusammen mit den experimentellen Ergebnissen konnte damit der erste Attosekundenpulsformer in dieser Arbeit demonstriert werden. Die Verfügbarkeit von Femtosekundenpulsformern eröffnete das Gebiet der adaptiven Femtosekunden-Quantenkontrolle. Die bahnbrechende Idee der `closed-loop' Rückkopplungskontrolle, die dazu experimentell implementiert wurde, war von Judson und Rabitz in ihrer wegweisenden Arbeit mit dem Titel ``Teaching lasers to control molecules'' (``Es Lasern beibringen, Moleküle zu kontrollieren'') zum Ausdruck gekommen. Die vorliegende Arbeit kann dieser Idee nun eine erweiterte und eine ``umgekehrte'' Form hinzufügen: ``Teaching molecules to control laser light conversion'' (``Es Molekülen beibringen, Laserlichtkonversion zu kontrollieren'') und ``Teaching lasers to control coherent soft x-ray light'' (``Es Lasern beibringen, kohärentes weiches Röntgenlicht zu kontrollieren''). Die ursprüngliche Idee erlaubte somit nun also auch den Sprung von der Femtosekundenkontrolle molekularer Dynamik hinein in das neue Gebiet der Attosekundenkontrolle elektronischer Bewegung, dessen Erforschung nun unmittelbar bevorsteht. Die Idee der \emph{geschlossenen} Schleife (`closed-loop') konnte damit tatsächlich das Tor \emph{öffnen} hinaus in eine Fülle neuer Perspektiven für die Naturwissenschaft. KW - Ultrakurzer Lichtimpuls KW - Femtosekundenbereich KW - Frequenzvervielfachung KW - Kohärente Anregung KW - Weiche Röntgenstrahlung KW - Kohärente Kontrolle KW - Erzeugung hoher Harmonischer KW - Femtosekunden-Laserpulsformung KW - Atom und Molekülphysik KW - Optik KW - Ultraschnelle Röntgenstrahlung KW - Coherent Control KW - High-Harmonic Generation KW - Femtosecond Laser Pulse Shaping KW - Atomic KW - Molecular and Optical Physics KW - Ultrafast X-Ray Science Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-9854 ER - TY - THES A1 - Papastathopoulos, Evangelos T1 - Adaptive control of electronic excitation utilizing ultrafast laser pulses T1 - Adaptive Kontrolle elektronischer Anregung mitels Femtosekunden-Laserpulsen N2 - The subject of this work has been the investigation of dynamical processes that occur during and after the interaction of matter with pulses of femtosecond laser radiation. The experiments presented here were performed in the gas phase and involve one atomic and several model molecular systems. Absorption of femtosecond laser radiation by these systems induces an electronic excitation, and subsequently their ionization, photofragmentation or isomerization. The specific adjustment of the excitation laser field properties offers the possibility to manipulate the induced electronic excitation and to influence the formation of the associated photoproducts. From the perspective of the employed spectroscopic methods, the development of photoelectron spectroscopy and its implementation in laser control experiments has been of particular interest in this thesis. This technique allows for a most direct and intuitive observation of electronic excitation dynamics in atomic as well as in complex polyatomic molecular systems. The propagation of an intermediate electronic transient state, associated to the formation of a particular photoproduct, can be interrogated by means of its correlation to a specific state of the atomic or molecular continuum. Such correlations involve the autoionization of the transient state, or by means of a second probe laser field, a structural correlation, as summarized by the Koopman's theorem (section 2.4.1). The technique of adaptive femtosecond quantum control has been the subject of development in our group for many years. The basic method, by which the temporal profile of near-infrared laser pulses at a central wavelength of 800 nm, can be adjusted, is a programmable femtosecond pulse-shaper that comprises of a zero dispersion compressor and a commercial liquid crystal modulator (LCD). This experimental arrangement was realized prior to this thesis and served as a starting point to extend the pulse-shaping technique to the ultraviolet spectral region. This technological development was realized for the purposes of the experiments presented in Chapter 5. It involves a combination of the LCD-pulse-shaper with frequency up-conversion techniques on the basis of producing specifically modulated laser pulses of central wavelength 266 nm. Furthermore, the optical method X-FROG had to be developed in order to characterize the often complex structure of generated ultraviolet pulses. In the adaptive control experiments presented in this work, the generated femtosecond laser pulses could be automatically adjusted by means of specifically addressing the 128 independent voltage parameters of the programmable liquid-crystal modulator. Additionally a machine learning algorithm was employed for the cause of defining laser pulse-shapes that delivered the desired (optimal) outcome in the investigated laser interaction processes. In Chapter 4, the technique of feedback-controlled femtosecond pulse shaping was combined with time-of-flight mass spectroscopy as well as photoelectron spectroscopy in order to investigate the multiphoton double ionization of atomic calcium. A pronounced absolute enhancement of the double ionization yield was obtained with optimized femtosecond laser pulses. On the basis of the measured photoelectron spectra and of the electron optimization experiments, a non-sequential process was found, which plays an important role in the formation of doubly charged Calcium ions. Then in Chapter 5, the dynamics following the pp* excitation of ethylene-like molecules were investigated. In this context, the model molecule stilbene was studied by means of femtosecond photoelectron spectroscopy. Due to the simplicity of its chemical structure, stilebene is one of the most famous models used in experimental as well as theoretical studies of isomerization dynamics. From the time-resolved experiments described in that chapter, new spectroscopic data involving the second excited electronic state S2 of the molecule were acquired. The second ethylenic product was the molecule tetrakis (dimethylamino) ethylene (TDMAE). Due to the presence of numerous lone pair electrons on the four dimethylamino groups, TDMAE exhibits a much more complex structure than stilbene. Nevertheless, previously reported studies on the dynamics of TDMAE provided vital information for planning and conducting a successful optimisation control experiment of the wavepacket propagation upon the (pp*) S1 excited potential surface of the molecule. Finally, in Chapter 6 the possibility of employing femtosecond laser pulses as an alternative method for activating a metallocene molecular catalyst was addressed. By means of an adaptive laser control scheme, an optimization experiment was realized. There, the target was the selective cleavage of one methyl-ligand of the model catalyst (Cp)^2Zr(CH3)^2, which induces a catalytic coordination position on the molecule. The spectroscopic studies presented in that chapter were performed in collaboration to the company BASF A.G. and constitute a proof-of principle attempt for a commercial application of the adaptive femtosecond quantum control technique. N2 - Das Thema der hier vorgestellten Arbeit umfasst die Untersuchung von dynamischen Prozessen, die während der Wechselwirkung von Femtosekunden Laserpulsen mit Atomen und Molekülen stattfinden. Die entsprechenden Experimente sind in der Gasphase durchgeführt worden, wobei ein Atom- und mehrere Molekül-Modellsysteme untergesucht wurden. Die Absorption von Femtosekunden-Laserstrahlung induziert die elektronische Anregung der quantumsmechanischen Systeme und eventuell deren Ionisation, Photofragmentnation oder Isomerisierung. Die gezielte Einstellung der Laserfeldeigenschaften bietet die Möglichkeit, diese Prozesse zu beeinflussen, beziehungsweise die Formung von entsprechenden Photoprodukten zu steuern. Im Hinblick auf die verwendeten spektroskopischen Methoden wurde besonderes Interesse auf die Entwicklung von Photoelektronen-Spektroskopie und in deren Einsatz zur Durchführung von laserinduzierten Kontrollexperimente gelegt. Photoelektronen-Spektroskopie ermöglicht die direkte und intuitive Beobachtung elektronischer Anregungsdynamik in Atomen sowie in komplexen mehreratomaren Molekülsystemen. Die zeitliche Entwicklung von angeregten elektronischen Zuständen ist oft bei der Formung von bestimmten Photoprodukten assoziiert. Die Dynamik kann mittels der Korrelation des sich entwickelnden Zustandes zu den Kontinuumzuständen des Atom- oder Molekül-Systems untersucht werden. Das detektionsverfahren umfasst die Autoionization oder, mittels eines zweiten Laserpulses, die Weiteranregung des Systems ins Kontinuum. Denn, die Beobachtung der entsprechenden Strukturänderungen des Systems erfolgt mittels der Korrelation des zwischenangeregten Zustand zu den verschiedenen Kontinuumzuständen (Koopman Theorem). Seit mehreren Jahren wurde die Methode der adaptiven Femtosekunden-Pulsformung in unserer Gruppe entwickelt. Die anfängliche experimentelle Anordnung besteht aus einer Kombination von einem Flüssig-Kristall-Modulator (LCD) und einen Null-Dispersions-Kompressor. Damit ist es möglich, das zeitliche Profil von Laserpulsen im Infrarot (800 nm) Spektralbereich automatisch zu modulieren. Diese Entwicklungsarbeit stand bereits zu Verfügung vor dem Anfang der vorgestellten Dissertation. Hier wurde die Erweiterung dieser Methode in den uravioletten Spektralbereich vorgestellt (Kapitel 5). Es umfasst eine Kombination von dem bestehenden LCD-Pulsformer und einem Verfahren zur Frequenzkonversion, das die Erzeugung von modulierten aserpulsen mit eine Wellenlänge 266 nm ermöglicht. Die entsprechende Charakterisierungsmethoden (X-FROG) wurden ebenfalls entwickelt. Die Femtosekunden-Laserpulse können automatisch moduliert werden durch die entsprechende Einstellung der 128 unabhängigen Spannungsparametern des LCD-Modulators. Zusätzlich wurden die optimale Parameter für die Kontrolle eines bestimmten anregungsprozess mittels eines Machine-Learning Algorithmus gefunden. In Kapitel 4 wurde die Mehrphoton-Doppleionization von Calciumatomen untersucht. Dabei wurde die Methode der adaptiven Pulsformung zusammen mit time-of-flight Massenspektroskopie und Photoelektronenspektroskopie ingesetzt. Das absolute Signal der Doppleionization konnte verdoppelt werden durch die Anregung mit bestimmten komplexen Pulsformen. Gerade bei den Optimierungexperimenten an photoelektronenspektra konnte ein „non-sequential" Prozess entdeckt werden, der eine wichtige Rolle bei der Doppleionization von Calcium spielt. In Kapitel 5 wurde die Dynamik von pp* Anregungsprozessen von Ethylenähnlichen-Moleküle untersucht. Im diesen Zusammenhang wurde das Modelmolekül Stilbene mittels Photoelektronenspektroskopie weiteruntersucht. Wegen seiner einfachen Struktur ist Stilbene eines der meistbenutzten Moleküle für Untersuchungen zur Photoisomerisierungsdynamik. Gerade bei den hier dargestellten zeitaufgelüsten Messungen wurde neu spektroskopische Information über den zweiten angeregten elektronische Zustand S2 entdeckt. Das zweite untersuchte Molekül ist Tetrakis Dimethylamino) Ethylen (TDMAE). Wegen den zahlreichen „Lone-Pair" Elektronen an seinen Dimethylamino Gruppen ist die gesamte Struktur des Moleküls deutlich komplexer im Vergleich zu Stilbene. Allerdings, ausgehend von gegebenen spektroskopischen Informationen aus der Literatur konnte ein erfolgreiches Kontrollexperiment an der Wellenpackets-Propagation des pp* Anregungsprozesses (auf dem S1 Zustand) geplant und durchgeführt werden. In Kapitel 6 wurde schließlich die Möglichkeit erforscht, einen Metallocene-Katalysator mittels Femtosekunden-Laserpulsen zu aktivieren. Das Kotrollschema der adaptiven Pulsformung wurde dabei eingesetzt, um eine der zwei identischen Methylgruppen des Moleküls selektiv abzuspalten, was zur Aktivierung des Katalysators führt. Diese spektroskopische Untersuchung wurde in Kollaboration mit der Firma BASF A.G. durchgeführt. Es stellt einen Grundlagenversuch der industriellen Anwendung der adaptiven Quantumskontrollemethode dar. KW - Ultrakurzer Lichtimpuls KW - Femtosekundenbereich KW - Molekulardynamik KW - Photochemische Reaktion KW - Regelung KW - Laser KW - Femtosekundendynamik KW - Photofragmentation KW - Isomerizierung KW - Ionization KW - Laser KW - Femtosecond dynamics KW - Photofragmentation KW - Isomerization KW - Ionization Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-12533 ER - TY - THES A1 - Walter, Dominik T1 - Adaptive Control of Ultrashort Laser Pulses for High-Harmonic Generation T1 - Adaptive Kontrolle ultrakurzer Laserpulse zur Erzeugung Hoher Harmonischer N2 - The generation of high harmonics is an ideal method to convert frequencies of the infrared- or visible range into the soft x-ray range. This process demands high laser intensities that are nowadays supplied by femtosecond laser systems. As the temporal and spatial coherence properties of the laser are transferred during the conversion process, the generated high harmonics will propagate as a beam with high peak-brightness. Under ideal conditions the generation of soft-x-ray pulses shorter than one femtosecond is possible. These properties are exploited in many applications like time-resolved x-ray spectroscopy. The topic of this thesis is the generation and optimization of high harmonics. A variety of conversion setups is investigated (jet of noble gas atoms, gas-filled hollow-fiber, water microdroplets) and theoretical models present ideas to further enhance the conversion efficiency (using excited atoms or aligned molecules). In different setups the peak intensity of the fundamental laser pulses is increased by spectral broadening and subsequent temporal compression. This is achieved with the help of pulse shaping devices that can modify the spectral phase and therefore also the temporal intensity distribution of laser pulses. These pulse shaping devices are controlled by an evolutionary algorithm. With this setup not only adaptive compression of laser pulses is possible, but also the engineering of specific laser pulse shapes to optimize an experimental output. This setup was used to influence the process of high harmonic generation. It is demonstrated that the spectral distribution of the generated soft-x-ray radiation can be controlled by temporal pulse shaping. This method to tailor high harmonics is complemented by spatial shaping techniques. These findings demonstrate the realization of a tunable source of soft-x-ray radiation. N2 - Die Erzeugung hoher Harmonischer ist eine ideale Methode zur Frequenzkonversion von Licht aus dem sichtbaren- oder Infrarotbereich in den weichen Röntgenbereich. Für diesen Prozess werden hohe Laserintensitäten benötigt, die heutzutage von Femtosekundenlasersystemen bereitgestellt werden können. Da die zeitlichen und räumlichen Kohärenzeigenschaften des Lasers während der Ereugung der hohen Harmonischen Frequenzen nicht verlorengehen, erhält man unter geeigneten Bedingungen räumlich gerichete Pulse weicher Röntgenstrahlung mit Pulsdauern unter einer Femtosekunde. Die hohe Frequenz der erzeugten Strahlung und die kurze Zeitstruktur sind für eine Vielzahl von Anwendungen von grossem Nutzen, z.B. der zeitaufgelösten Röntgenspektroskopie. Die vorliegende Arbeit beschäftigt sich insbesondere mit der Erzeugung und Optimierung Hoher Harmonischer. Es werden experimentelle Ergebnisse unterschiedlicher Aufbauten zur Frequenzkonversion untersucht (Gas Strahl aus Edelgasatomen, gasgefüllte Hohlfaser, Wasser-Mikrotröpfchen) und theoretische Modelle zur effizienteren Erzeugung hoher Harmonischer (Erzeugung in angeregten Atomen oder ausgericheten Molekülen). Um die zur Verfügung stehende Laserintensität weiter zu erhöhen, werden verschiedene Aufbauten zur spektralen Verbreiterung und anschliessenden zeitlichen Kompression genutzt. Dabei kommen Pulsformer zum Einsatz, mit denen sich die spektrale Phase der Laserpulse, und damit gleichzeitig deren zeitlicher Intensitätsverlauf, kontrollieren lässt. Die Pulsformer werden von einem evolutionären Algorithmus gesteuert, wodurch beispielsweise eine automatisierte Pulskompression möglich ist oder Pulsformen erzeugt werden können, die gezielt das Ergebnis eines Experimentes optimieren. Mithilfe eines solchen adaptiven optischen Aufbaus ist es möglich auch den Prozess der Erzeugung hoher Harmonischer zu beeinflussen. Wie gezeigt wird, lässt dich damit die spektrale Verteilung hoher Harmonischer steuern. Der Grad an Kontrolle der erzeugten Strahlung kann durch räumliche Pulsformung noch weiter erhöht werden. Somit ist eine durchstimmbare Quelle köhärenter weicher Röntgenstrahlung realisiert. KW - Frequenzvervielfachung KW - Ultrakurzer Lichtimpuls KW - Femtosekundenbereich KW - Adaptivregelung KW - ultrakurz KW - Hohe Harmonische KW - Pulsformung KW - Evolutionärer Algorithmus KW - Adaptive Optimierung KW - ultrashort KW - high harmonic generation KW - pulse shaping KW - evolutionary algorithm KW - adaptive optimization Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-21975 ER - TY - THES A1 - Niklaus, Patrick T1 - Adaptive Femtosekunden Quantenkontrolle chemischer Reaktionen in der flüssigen Phase T1 - Adaptive femtosecond quantum control of chemical reactions in the liquid phase N2 - Ziel der vorliegenden Arbeit war es, die Methode der adaptiven Pulsformung von Femtosekunden Laserpulsen in der flüssigen Phase experimentell zu realisieren. Eine Erweiterung dieser Technik auf die kondensierte Phase stellt einen wichtigen Schritt in Richtung einer breiten Anwendbarkeit zur Steuerung von chemischen Reaktionen dar. Die größere Teilchendichte im Vergleich zur Gasphase ermöglicht zum einen eine Erhöhung der erzielbaren absoluten Produktausbeuten. Andererseits ergibt sich erst dadurch die Möglichkeit, reale chemische Reaktionen, wie bimolekulare Reaktionen, gezielt zu steuern, da Stöße zwischen verschiedenen Molekülen wahrscheinlicher werden. Die Methode der adaptiven Quantenkontrolle ist für die Anwendung in der flüssigen Phase bestens geeignet, da sie eine kohärente Kontrolle von photoinduzierten molekularen Prozessen selbst in komplexen Quantensystemen erlaubt. In dieser experimentellen Umsetzung einer ,,geschlossenen Kontrollschleife'' wird die spektrale Phasenstruktur von fs-Laserpulsen in einem computergesteuerten Pulsformer moduliert. Der resultierende geformte Laserpuls wechselwirkt anschließend mit dem zu untersuchenden molekularen System und steuert aktiv die Entwicklung des erzeugten Wellenpakets auf der Potentialenergiefläche. Eine quantitative Messung der erzeugten Photoprodukte dieser Licht-Materie Wechselwirkung dient als Rückkopplungssignal eines selbstlernenden Computeralgorithmus. Der auf dem Prinzip der Evolutionstheorie arbeitende Algorithmus verbessert nun iterativ die Pulsform bis ein Optimum des gewünschten Reaktionskanals erreicht wird. Das modulierte elektrische Feld des Laserpulses passt sich somit entsprechend der gestellten Kontrollaufgabe automatisch den molekularen Eigenschaften an. Um jedoch die Anwendung dieser Technik auch in der kondensierten Phase zu demonstrieren, mussten Methoden zur Gewinnung eines Rückkopplungssignals gefunden werden. Im Rahmen dieser Arbeit wurden daher Möglichkeiten eines quantitativen Rückkopplungssignals für die adaptive Kontrolle in der flüssigen Phase untersucht, wie die Emissionsspektroskopie und die transiente Absorption im UV/VIS oder infraroten Spektralbereich. In einem ersten Experiment wurde die Emissionsspektroskopie verwendet, um einen Ladungstransferprozess (MLCT) in einem Ru(II)-Komplex ([Ru(dpb)3]2+) mit geformten fs-Laserpulsen zu steuern. Um die dominierende Intensitätsabhängigkeit der Anregung zu eliminieren, wurde die Emissionsausbeute mit dem SHG-Signal eines nichtlinearen Kristalls „normiert“. Diese Auslöschung des intensitätsabhängigen Faktors in beiden Prozessen ermöglichte es, Pulsformen zu finden, die dieses Verhältnis sowohl maximieren als auch minimieren. Ein Ansatz zur Erklärung der experimentellen Ergebnisse konnte mit Hilfe eines störungstheoretischen Modells beschrieben werden. In einem zweiten Experiment wurde erstmals eine photochemische Selektivität zwischen zwei verschiedenen Substanzen in der kondensierten Phase demonstriert. Dabei sollte die jeweilige Zwei-Photonen Anregung des Komplexes [Ru(dpb)3]2+ gegenüber dem Molekül DCM selektiv kontrolliert werden. Wiederum diente die spontane Emission beider Substanzen als Rückkopplungssignal für die Effektivität des Anregungsschritts. Verschiedene Ein-Parameter Kontrollmethoden, wie der Variation der Anregungswellenlänge, der Intensität sowie des linearen Chirps, konnten diese Kontrollaufgabe nicht erfüllen. Jedoch konnte eine Optimierung des Verhältnisses der beiden Emissionsausbeuten mit Hilfe der adaptiven Pulsformung erzielt werden. Das Ergebnis dieses Experiments zeigt, dass photoinduzierte Prozesse in zwei unterschiedlichen molekularen Substanzen trotz der Wechselwirkungen der gelösten Moleküle mit ihrer Lösungsmittelumgebung selektiv und simultan kontrolliert werden können. Das Ziel des dritten Experiments war eine gezielte Steuerung einer komplexeren chemischen Reaktion. Mit Hilfe der adaptiven Pulsformung konnte eine optimale Kontrolle der Photoisomerisierungsreaktion des Moleküls NK88 demonstriert werden. Das dazu benötigte Rückkopplungssignal für den evolutionären Algorithmus wird durch transiente Absorptionsspektroskopie im UV/VIS Spektralbereich bereitgestellt. Eine Untersuchung der Dynamik der Isomerisierungsreaktion mit Hilfe der Pump-Probe Technik erlaubte eine Zuordnung zweier verschiedener Absorptionsbereiche zu den jeweiligen Isomeren. Die Ergebnisse der Optimierung des Verhältnisses der Quantenausbeuten der beiden Isomere zeigten, dass die geformten Laserpulse eine Kontrolle der Effizienz der Photoisomerisierung in der flüssigen Phase ermöglichen. Zusammenfassend kann man sagen, dass im Rahmen dieser Arbeit mit Hilfe der fs-Lasertechnologie und der Technik der adaptiven fs-Quantenkontrolle Experimente durchgeführt wurden, die einen wichtigen Beitrag zu dem neuen Forschungsbereich der Femtochemie darstellen. Die Erweiterung dieser Technik auf die flüssige Phase beschreibt einen ersten Erfolg in Richtung einer neuartigen Chemie. N2 - The goal of this work was to experimentally implement the technique of adaptive femtosecond quantum control of photoinduced reactions in solution. A successful experiment in the liquid phase would represent an important step towards an universal applicability to the control of chemical reactions. The sufficiently high particle densities available in solution allow the processing of macroscopic amounts of chemical substances. Additionally, only in the condensed phase the particle densities are high enough to achieve control for bimolecular synthetic-chemical applications. The technique of adaptive quantum control is most suitable for an application in the liquid phase, as it allows the coherent control of quantum-mechanical processes even in complex systems. In this experimental “closed-loop” setup, the spectral phase structure of fs laser pulses is modulated by a computer-controlled pulse shaper. The resulting shaped laser pulses then interact with the quantum system under consideration, where specific wavepacket dynamics is initiated. The quantitative detection of the generated photoproducts is used as feedback within a learning algorithm. Based on concepts of the evolution theory, this optimization algorithm iteratively improves the pulse-shaper settings until an optimum is reached. Thus the modulated electric field automatically “adapts” to the molecular properties according to the specified control objective. For a successful demonstration of an application of this technology to chemical reactions in the solution phase, suitable feedback signals have to be found. Hence in this work, suitable feedback signals were explored which can be used to probe the result of the solution phase photoreactions reliably and fast. Besides the emission spectroscopy, especially transient absorption techniques in the UV/visible or infrared spectral region turned out to be suitable for quantitatively detecting the quantum yields of the different photoproducts generated by a shaped laser pulse. In a first experiment, emission spectroscopy was employed to investigate the metal-to-ligand charge transfer (MLCT) in a Ru(II) coordination complex ([Ru(dpb)3]2 using adaptive fs pulse shaping. Using the spontaneous emission signal as feedback in the learning procedure, it was possible to control the MLCT excitation process. However, the MLCT excitation occurs via two-photon absorption and is therefore dominantly second-order intensity dependent. This trivial intensity dependence can be removed by using as a new feedback signal the ratio of the molecular response (here: emission) versus a purely optical signal of the same nonlinear order (here: SHG in a thin crystal). The resulting optimized laser pulse shapes were able to both maximize and minimize the ratio emission/SHG, thus proving that adaptive fs quantum control is sensitive to the electronic and vibrational properties of molecules under liquid-phase conditions. The results of this experiment could be understood within a simple perturbation theory model. In a second experiment, chemically selective molecular excitation of two distinct complex molecules (the MLCT-complex [Ru(dpb)3]2+ and the laser dye DCM) in solution was achieved employing shaped fs laser pulses. After two-photon absorption and excited-state dynamics, the spontaneous emission yields are again used as a measure for the excited-state populations in the feedback loop. The experiment was designed to ask if and how coherent light fields can be used to selectively excite one specific molecule (but not another one) within liquid-phase solute/solvent mixtures. Despite the failure of single-parameter approaches (variation of wavelength, intensity or linear chirp), an optimization of the emission yield ratio was successful employing adaptive quantum control. This experiment demonstrates that photoprocesses in two different molecular species can selectively be controlled simultaneously. The goal of a third experiment was the control of a more complex chemical reaction. The reaction type we chose to investigate and to control was the cis-trans isomerization of the molecular system NK88. We chose as feedback signal the ratio of cis-isomers in their ground state after the photoisomerization process to the amount of initially excited trans-isomers (i.e., the relative reaction yield). To determine these quantities, we recorded the transient absorption signal at two different wavelengths. By optimizing the ratio of the relative quantum yields of the two isomers, we demonstrated that the efficiency of the photoisomerization reaction can both be enhanced and reduced. In conclusion, in the context of this work experiments were performed employing the technology of fs laser pulses and adaptive quantum control, which represent an important contribution to the relatively new research field of femtochemistry. The successful transfer of this technique to the liquid phase constitutes a first step towards a new kind of chemistry. KW - Ultrakurzer Lichtimpuls KW - Femtosekundenbereich KW - Ausgangsmaterial KW - Flüssiger Zustand KW - Photochemische Reaktion KW - Kohärente Kontrolle KW - adaptive Quantenkontrolle KW - Femtosekunden KW - evolutionärer Algorithmus KW - Coherent control KW - adaptive quantum control KW - femtosecond KW - evolutionary algorithm Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-12855 ER - TY - THES A1 - Vogt, Gerhard Sebastian T1 - Adaptive Femtosekunden-Quantenkontrolle komplexer Moleküle in kondensierter Phase T1 - Asaptive femtosecond quantum control of complex molecules in the condensed phase N2 - Die Bildung verschiedener Isomere durch Änderung der molekularen Struktur spielt eine wichtige Rolle in vielen Gebieten der Physik, Chemie und Biologie. Die Kontrolle dieser Reaktionen ist daher eine sehr interessante Herausforderung und von großer Bedeutung für viele verschiedene Bereiche. Die Entwicklung der letzten Jahre hat gezeigt, dass adaptive Femtosekunden Quantenkontrolle eine ausgesprochen geeignete Methode ist, um chemische Reaktionen zu kontrollieren. Die vorliegende Arbeit behandelt die Beobachtung und Kontrolle von solchen Isomerisierungsreaktionen in biologisch und chemisch relevanten Systemen. Dazu wurde die Reaktionsdynamik eines in Methanol gelösten Modellmoleküls mittlerer Größe mittels transienter Absorption, Fluorescence Upconversion und Anisotropie Spektroskopie untersucht. In Kooperation mit F. Santoro und R. Improta konnte eine detaillierte Beschreibung der ablaufenden Prozesse gefunden werden. In Übereinstimmung mit den von ihnen durchgeführten quantenmechanischen Simulationen hat sich herausgestellt, dass sich die Dynamik auf der ersten angeregten Potentialfläche nach der Anregung auf zwei Zeitskalen abspielt. Nach dem Passieren einer konische Durchschneidung isomerisiert das Molekül entweder zum thermodynamisch stabileren trans Isomer oder zu den instabileren Produktisomeren. An diesem System wurden nun adaptive Femtosekunden Quantenkontrollexperimente durchgeführt, mit dem Ziel den Isomerisierungsprozess zu beeinflussen. Es konnte erfolgreich gezeigt werden, dass die Isomerisierungseffizienz (die relative Menge von Edukt- zu Produktisomeren) sowohl erhöht als auch verringert werden kann. Einzel-Parameter Kontrollmechanismen wie zum Beispiel das Verwenden verschieden gechirpter Anregeimpulse oder unterschiedlicher Anregeimpulsenergien ergaben einen nur geringen Einfluss auf die Isomerisierungseffizienz. Diese Kontrollstudien über den Isomerisierungsprozess haben weiterführende Experimente an dem sehr komplexen biologischen System Retinal innerhalb des Proteins Bakteriorhodopsin motiviert. Die traditionelle Anrege-Abrege-Abfrage Technik wurde zu einem neuen Anrege-geformten-Abrege-Abfrage Konzept erweitert. Dadurch können molekulare Systeme in den Regionen der Potentialenergie-Landschaft kontrolliert werden, in denen der entscheidende Reaktionsschritt stattfinded. Verschiedene theoretische Berechnungen zum Problem der Erhöhung der Isomerisierungseffizienz stellen in Aussicht, dass Anrege-Abrege-Wiederanrege-Abfrage Mechanismen eine Möglichkeit der effektiven Beeinflussung der Reaktionsdynamik eröffnen. Mit der weiterentwickelten Methode können solche Vier-Puls-Techniken realisiert und ihr Einfluss auf den Reaktionsprozess systematisch untersucht werden. Zusätzlich wurde mittels Variation von parametrisierten spektralen Phasenfunktionen, wie verschiedene Ordnungen Chirp, die Dynamik des Abregungsprozesses beleuchtet. Durch Formen des Abregungsimpulses mittels adaptiver Femtosekunden Quantenkontrolle wurden die Informationen aus den systematische Untersuchung vervollständigt. Häufig sind die aus einem adaptiven Femtosekunden Quantenkontrollexperiment erhaltenen optimalen Laserimpulsformen sehr kompliziert. Besonders Anrege-Abrege Szenarien spielen oft eine wichtige Rolle in den ermittelten optimalen Lösungen und sollten daher gesondert untersucht werden. Dazu können verschiedenfarbige Doppelimpulse verwendet werden, bei denen man sowohl den Pulsabstand als auch die relative Amplitude oder die Phasendifferenz der beiden Einzellpulse systematisch ändert. Diese weiterentwickelte Methode wurde mittels einfacher Experimente charakterisiert. In einem weiteren Schritt wurde ein Aufbau entworfen, der Doppelimpulse erfordert, um ein maximale Ausbeute von Licht bei einer Wellenlänge von 266~nm zu erhalten. Mit dem Kontrollziel der maximalen dritten Harmonischen Ausbeute wurden adaptive Femtosekunden Quantenkontrollexperimente durchgeführt. Durch zusätzliche Messungen von verschiedenfarbigen Doppelimpuls-Kontrolllandschaften konnte die optimale Pulsform ermittelt und bestätigt werden. In einem abschließenden Experiment wurde die Abhängigkeit der Anregeeffizienz eines komplexen, in Methanol gelösten Farbstoffmoleküls auf verschiedene Impulsformen untersucht. Aus den Ergebnissen wird ersichtlich, dass sehr unterschiedliche Impulsformen ein Kontrollziel ähnlich gut erfüllen können. Verschiedenfarbige Doppelimpuls-Kontrolllandschaften können einen Einblick in Kontrollmechanismen von adaptiv gefundenen Impulsformen ermöglichen und Informationen über die Reaktionsdynamik liefern. Mittels der angewandten und weiterentwickelten Methoden mehr über verschiedene Prozesse unterschiedlicher Molekülklassen zu lernen ist ein viel versprechendes und realistisches Ziel für die Zukunft. Die präsentierten Experimente zeigen, dass es möglich ist, geometrische Änderungsreaktionen in chemisch und biologisch relevanten Systemen durch adaptive Femtosekunden Quantenkontrolle zu steuern. N2 - The formation of different isomers by rearrangement of the molecular structure plays a substantial role in many areas in physics, chemistry and biology. The control of such reactions is therefore a very appealing task. Directly connected to the control is the observation and characterization of the dynamics. Within the last years, adaptive femtosecond quantum control has proven to be a very powerful tool to control chemical reactions. Prototype experiments based on simple reactions already have shown that the concept of femtosecond quantum control is also applicable for molecules in a condensed environment. This thesis deals with the observation and control of such isomerization reactions in chemically and biologically relevant systems. Therefore the reaction dynamics of a medium size prototype molecule of the family of the cyanine dyes in solution were investigated by transient absorption spectroscopy, by fluorescence upconversion and by anisotropy spectroscopy. In cooperation with F. Santoro and R. Improta a detailed and reliable description of the overall kinetics was achieved, evidencing a two-timescale dynamics on the first excited potential energy surface after excitation. After decaying through a conical intersection, the molecule isomerizes either to the thermodynamically most stable trans isomer or to two less stable product isomers. Adaptive femtosecond quantum control experiments were performed on this system with the objective to control the isomerization process. Both enhancement as well as reduction of the isomerization efficiency, i.e the relative yield of the educt to the product isomers, were achieved. Single parameter control mechanisms such as applying different chirps or varying the excitation laser pulse energy failed to change the ratio of the photoproducts. These control studies on the isomerization process of a medium size molecule in the condensed phase motivated experiments on the very complex biological system of retinal embedded in bacteriorhodopsin. The traditional pump-dump-probe method was extended to a new pump-shaped-dump-probe scheme to control molecular systems in those regions of the potential-energy landscape where the decisive reaction step occurs. Different theoretical simulations on the enhancement of the isomerization yield predict that pump-dump-repump-probe mechanisms can control the reaction dynamics. Using the novel scheme, such a four-pulse technique with a double-pulse-like shaped dump pulse can be realized and its impact on the reaction process can be systematically investigated. With further parameterized scans of specialized phase functions, such as different orders of chirp, the dynamics of the dumping process has been illuminated. Finally by adaptively shaping the dump pulse the information from the systematic scan has been refined and completed. Very often, adaptively obtained optimal laser pulse shapes are very complicated and can contain structures, that contribute to a certain control mechanism to different degrees. Consequently, it can be difficult to identify the control mechanism of such optimal pulses. Especially pump-dump scenarios often play an important role in the acquired optimal solution and therefore deserve to be investigated separately. For this, colored double pulses are employed and both the pulse separation and the relative amplitude or phase difference of the two subpulses are systematically scanned. This further developed method was first characterized by simple experiments. Then, a setup forcing double-pulses to obtain the highest third harmonic yield was designed. The control objective of maximizing the third harmonic yield has the advantage that the optimal pulse shape can be calculated and intuitively understood. Adaptive femtosecond quantum control experiments were performed with this control objective. With additional measurements of colored double-pulse control landscapes the control mechanism of the adaptively obtained optimal pulse shape can be extracted and confirmed. In a further experiment, the dependence of the excitation efficiency of a complex dye molecule dissolved in methanol on selected pulse shapes probed by transient absorption spectroscopy was studied. The results show that very different pulse shapes are equally adequate to fulfill the control objective. Colored double pulse scans thus can give an insight into the control mechanism of adaptively obtained pulse shapes and provide information about reaction dynamics. Investigations on various processes of different molecular classes using the methods developed and applied here are a promising and realistic goal for the near future. The presented experiments demonstrate a successful manipulation of geometrical rearrangement reactions in chemically and biologically relevant systems by adaptive femtosecond quantum control. KW - Molekül KW - Isomerisierungsreaktion KW - Ultrakurzer Lichtimpuls KW - Femtosekundenbereich KW - Adaptivregelung KW - Isomerizierung KW - Quantenkontrolle KW - transiente Absorption KW - kondensierte Phase KW - flüssige Phase KW - isomerization KW - quantum control KW - transiente absorption spectroscopy KW - condensed phase KW - liquid phase Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-20222 ER - TY - THES A1 - Selle, Reimer Andreas T1 - Adaptive Polarization Pulse Shaping and Modeling of Light-Matter Interactions with Neural Networks T1 - Adaptive Polarisationspulsformung und Modellierung von Licht-Materie-Wechselwirkungen mit Neuronalen Netzwerken N2 - The technique of ultrafast polarization shaping is applied to a model quantum system, the potassium dimer. The polarization dependence of the multiphoton ionization dynamics in this molecule is first investigated in pump–probe experiments, and it is then more generally addressed and exploited in an adaptive quantum control experiment utilizing near–IR polarization–shaped laser pulses. The extension of these polarization shaping techniques to the UV spectral range is presented, and methods for the generation and characterization of polarization–shaped laser pulses in the UV are introduced. Systematic scans of double–pulse sequences are introduced for the investigation and interpretation of control mechanisms. This concept is first introduced and illustrated for an optical demonstration experiment, and it is then applied for the analysis of the intrapulse dumping mechanism that is observed in the excitation of a large dye molecule in solution with ultrashort laser pulses. Shaped laser pulses are employed as a means for obtaining copious amounts of data on light–matter interactions. Neural networks are introduced as a novel tool for generating computer–based models for these interactions from the accumulated data. The viability of this approach is first tested for second harmonic generation (SHG) and molecular fluorescence processes. Neural networks are then utilized for modeling the far more complex coherent strong–field dynamics of potassium atoms. N2 - Die Technik der ultraschnellen Polarisationspulsformung wird auf ein Modell-Quantensystem, das Kalium-Dimer angewandt. Die Polarisationsabhängigkeit der Ionisationsdynamik wird zunächst mit Anrege-Abfrage-Experimenten untersucht, und anschließend in einem adaptiven Optimierungsexperiment mit polarisationsgeformten Nahinfrarot-Laserpulsen ausgenutzt. Die Polarisationspulsformungstechnik wird auf den ultravioletten Spektralbereich erweitert, und es werden Methoden zur Erzeugung und Charakterisierung von polarisationsgeformten UV-Pulsen vorgestellt. Systematische Abtastungen von Doppelpulsfolgen werden für die Untersuchung und Interpretation von Kontrollmechanismen vorgestellt. Geformte Laserpulse werden verwendet, um umfangreiche Daten über die Licht-Materie Wechselwirkung zu sammeln. Neuronale Netzwerke werden erstmals dazu verwendet, um aus den Daten numerische Modelle für die Wechselwirkung von Licht und Materie zu erzeugen. Die Durchführbarkeit dieses Ansatzes wird zunächst an SHG und Fluoreszenzprozessen demonstriert. Neuronale Netzwerke werden desweiteren dazu verwendet, um die weitaus komplexere Dynamik von Kaliumatomen in starken elektromagnetischen Feldern zu modellieren. KW - Lasertechnologie KW - Impulslaser KW - Optimale Kontrolle KW - Pulsformung KW - Neuronale Netzwerke KW - adaptive Optimierung KW - Polarisation KW - pulse shaping KW - neural networks KW - adaptive optimization KW - polarization Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-25596 ER - TY - THES A1 - Zinner, Martin Gerhard T1 - Adsorbat-induzierte Oberflächensysteme und ultra-dünne intermetallische Legierungsfilme im Fokus der niederenergetischen Elektronenbeugung und spektroskopischer Analysemethoden T1 - Adsorbate-unduced surface systems and ultra-thin intermetallic alloy films in the focus of low-energy electron diffraction and spectroscopic analysis methods N2 - Im Rahmen der vorliegenden Dissertation werden mit unterschiedlichen Analysemethoden die Korrelationen zwischen den strukturellen, elektronischen und magnetischen Eigenschaften von Selten Erd-basierten intermetallischen Oberflächenlegierungen anhand der beiden Probensysteme LaPt$_5$/Pt(111) und CePt$_5$/Pt(111) untersucht. Darüber hinaus werden die strukturellen Eigenschaften von Adsorbat-induzierten Oberflächenrekonstruktionen im sub-ML Bereich in reduzierten Dimensionen auf der Halbleiteroberfläche Si(111) anhand der beiden Materialsysteme Si(111)-(5$\times$2)-Au und Si(111)-($\sqrt{3}\times\sqrt{3}$)R30${\degree}$-Sn mit der Methode LEED-IV analysiert. Das erste experimentelle Kapitel dieser Arbeit behandelt die intermetallische Oberflächenlegierung LaPt$_5$/Pt(111), die sich ausbildet wenn La-Atome auf einem sauberen Pt(111)-Substrat abgeschieden werden und anschließend thermische Energie hinzugefügt wird. Die Dicke der gebildeten Legierung lässt sich über die zuvor angebotene Menge an La-Atomen variieren und resultiert aufgrund der Gitterfehlanpassung von Pt(111) und den obenauf liegenden LaPt$_5$-Filmen in sechs unterschiedliche Beugungsmuster im LEED, deren Überstrukturvektoren durch zwei unterschiedliche Rotationsausrichtungen in Bezug auf das Gitter des Substrats und unterschiedlichen lateralen Gitterkonstanten der Filme gekennzeichnet sind. Die atomare Struktur kann auf eine gemeinsame Kristallstruktur zurückgeführt werden, deren Stöchiometrie aus dickenabhängigen AES-Messungen zu LaPt$_5$ mit einer Pt-reichen Oberflächenabschlusslage bestimmt werden konnte. Die Ergebnisse einer durchgeführten LEED-IV Studie bestätigen das Wachstum der Filme in der CaCu$_5$-Struktur, wobei die Oberflächenterminierungslage im Vergleich zum Volumengitter ein zusätzliches Pt-Atom pro Einheitszelle aufweist, das zusätzlich um einen Wert von \unit{0.26}{\angstrom} aus der Oberfläche hervorsteht. Die La-Atome, die direkt unterhalb der Terminierungslage liegen, erfahren eine Verschiebung in entgegengesetzter Richtung, so dass im Vergleich zum Volumen der Filme eine lokal veränderte Symmetrie im oberflächennahen Bereich vorherrscht und sich auf die elektronischen Eigenschaften der LaPt$_5$-Filme auswirkt. Darüber hinaus wurden die Schwingungseigenschaften der LaPt$_5$-Filme mittels der polarisierten in situ Raman-Spektroskopie bestimmt, bei der die auftretenden Schwingungspeaks durch die Kenntnis der atomaren Struktur und mit Überlegungen aus der Gruppentheorie unterschiedlichen Tiefenbereichen der LaPt$_5$-Filme (Volumen und Oberfläche) zugewiesen werden konnten. Im zweiten experimentellen Kapitel liegt der Fokus auf der atomaren Struktur sowie auf den elektronischen und magnetischen Eigenschaften des Kondo- und Schwerfermionensystems CePt$_5$/Pt(111). In Abhängigkeit von der vor dem Legierungsprozess angebotenen Menge an Ce-Atomen auf dem Pt(111)-Substrat konnten insgesamt sieben verschiedene LEED-Phasen der CePt$_5$-Filme identifiziert werden, deren jeweilige Oberflächenrekonstruktionen durch eine unterschiedliche Rotationsausrichtung in Bezug auf das Pt(111)-Substrat gekennzeichnet sind. Zusätzlich ist die laterale Gitterkonstante einem Prozess aus Verspannung und Dehnung aufgrund der Gitterfehlanpassung von Film und Substrat ausgesetzt. Eine durchgeführte LEED-IV Analyse bestätigt das Wachstum der Filme in der CaCu$_5$-Struktur mit einer Pt-reichen Oberflächenabschlusslage, deren Pt$_3$-Kagom\'{e}-Lage im Vergleich zum Volumengitter mit einem zusätzlichen Pt-Atom pro Einheitszelle gefüllt ist. Die strukturellen Ergebnisse stimmen mit erzielten Resultaten aus früheren Arbeiten überein und verdeutlichen zudem die isostrukturellen Eigenschaften zur intermetallischen Oberflächenlegierung LaPt$_5$/Pt(111). Dies ermöglicht durch geeignete Vergleichsexperimente an LaPt$_5$/Pt(111) die induzierten Phänomene der $4f$-Elektronen bezüglich des Kondo- und Schwerfermionenverhaltens bei CePt$_5$/Pt(111) zu bestimmen, da La-Atome in ihrem atomaren Aufbau keine $4f$-Elektronen beherbergen. Mit der polarisierten in situ Raman-Spektroskopie aufgenommene Spektren anhand von unterschiedlich dicken CePt$_5$-Filmen beinhalten sowohl charakteristische Schwingungspeaks als auch elektronische Übergänge. Das spektroskopische Verhalten der Schwingungspeaks zeigt dabei nicht nur Gemeinsamkeiten zu LaPt$_5$/Pt(111) bei der Zuweisung der Schwingungsmoden zu den jeweiligen Tiefenbereichen in den CePt$_5$-Filmen, sondern es treten auch Unterschiede auf, da eine CePt$_5$-Schwingungsmode einem anormalen Temperaturverhalten unterliegt, das auf die Wechselwirkung mit den $4f$-Elektronen zurückzuführen ist. Weitere spezifische Raman-Signaturen, die elektronischen Übergängen in Form von Kristallfeldniveauaufspaltungen der $4f$-Elektronen von Ce zugewiesen werden konnten, resultieren ebenfalls aus unterschiedlichen Regionen der CePt$_5$-Filme (Oberfläche, inneres Volumen, Interface). Die magnetischen Eigenschaften der CePt$_5$-Filme wurden mit XAS und XMCD an den Ce M$_{4,5}$-Kanten in Abhängigkeit von der Temperatur, dem Einfallswinkel, der Filmdicke und der Stärke des Magnetfelds analysiert. Die markanten Übergänge zwischen unterschiedlichen Curie-Weiss-Regimen in der inversen Suszeptibilität erlauben Rückschlüsse über das Kristallfeldaufspaltungsschema, die Kondo- und die RKKY-Wechselwirkung und korrelieren mit der Ce-Valenz. Zudem konnte bei tiefen Temperaturen ein Übergang in den kohärenten Schwerfermionen-Zustand für alle untersuchten CePt$_5$-Filmdicken in dieser Arbeit nachgewiesen werden. Durch die Vorhersage eines metamagnetischen Lifshitz-Übergangs für diese Filme, der sich in der Magnetfeldabhängigkeit des magnetischen Moments äußert, konnte durch die Aufnahme von Magnetisierungskurven bei tiefen Temperaturen und hohen Magnetfeldern auf zwei weitere charakteristische Energieskalen der renormalisierten Bandstruktur zugegriffen werden. Das dritte experimentelle Kapitel widmet sich der mit LEED und LEED-IV durchgeführten Aufklärung der atomaren Struktur eines quasi-eindimensionalen Elektronensystems, bei dem sich die gebildeten Au-Nanodrähte auf der Si(111)-Oberfläche durch eine Si(111)-(5$\times$2)-Au Rekonstruktion beschreiben lassen. Die aufgenommenen LEED-Bilder mit ihren markanten Beugungsreflexen und sogenannten Streifen deuten auf drei gleichwertige Rotationsdomänen, die jeweils um einen Winkel von \unit{120}{\degree} gegeneinander gedreht sind, auf der Oberfläche hin. Zudem konnte aus einer Simulation der Beugungsbilder das Auftreten von Streifen durch drei zusätzliche Spiegeldomänen, die eine Phasenverschiebung von einem halben Überstrukturvektor einführen und bei einer sorgfältigen LEED-IV Analyse ebenfalls berücksichtigt werden sollten, erklärt werden. Aus den in der Literatur nach einer zweiten Rekalibrierung der nötigen Menge an Au-Atomen zur Ausbildung der Si(111)-(5$\times$2)-Au Rekonstruktion in den letzten Jahren heftig diskutierten Strukturmodellen gibt das von Kwon und Kang aufgestellte Geometriemodell (KK-Modell) die beobachteten energieabhängigen Intensitätsmodulationen in den experimentellen Daten beim Vergleich mit theoretisch berechneten IV-Kurven am besten wieder. Für dieses Modell nimmt der R-Faktor nach Pendry bei den unabhängig voneinander betrachteten drei Energieserien unter verschiedenen Einfallswinkeln der Elektronen auf die Probenoberfläche stets den kleinsten Wert an. Unter der expliziten Berücksichtigung von Si-Adatomen, die sich zusätzlich auf der Oberfläche befinden und in einer (5$\times$4)-Einheitszelle beschrieben werden können, bleibt das KK-Modell das zu präferierende Strukturmodell zur Beschreibung der ausgebildeten Au-Ketten und der Si-Honigwabenstruktur bei der Si(111)-(5$\times$2)-Au Oberflächenrekonstruktion. Im letzten experimentellen Kapitel wird ein zweidimensionales Elektronensystem -- die $\alpha$-Si(111)-($\sqrt{3}\times\sqrt{3}$)R30${\degree}$-Sn Oberflächenrekonstruktion, die sich bei 1/3 ML an Sn-Adsorbaten auf dem Si(111)-Substrat ausbildet -- im Hinblick auf die atomare Struktur bei Raumtemperatur mit LEED und LEED-IV untersucht. Aus den insgesamt sechs in die Analyse aufgenommenen Strukturmodellen, bei denen die Sn-Atome innerhalb der rekonstruierten ($\sqrt{3}\times\sqrt{3}$)R30${\degree}$-Einheitszelle unterschiedliche Adsorptionsplätze auf einer ideal terminierten Si(111)-Oberfläche einnehmen, konnte ein Legierungsverhalten, wie es bei der $\gamma$-Si(111)-($\sqrt{3}\times\sqrt{3}$)R30${\degree}$-Sn Phase auftritt, ausgeschlossen werden. Die Sn-Atome ordnen sich ausschließlich auf der Oberfläche neu an und führen zu einer Relaxation des darunterliegenden Substrats, deren atomare Verschiebungen sich bis in die sechste Si-Lage nachverfolgen lassen. Im Vergleich zu früheren Strukturaufklärungen an diesem Materialsystem bestätigt diese Analyse, dass sich die abgeschiedenen Sn-Atome auf T$_4$-Adsorptionsplätzen energetisch günstig anlagern, wobei die bei drei unterschiedlichen Einfallswinkeln aufgenommenen experimentellen Daten an unterschiedlichen Probenpositionen auf ein vorhandenes bzw. fehlendes Si-Atom auf einem S$_5$-Gitterplatz im darunterliegenden Si(111)-Substrat hindeuten. Außerdem konnte das theoretisch vorhergesagte dynamische Fluktuations-Modell aufgrund der sehr stark erhöhten thermischen Auslenkungen der Sn-Atome aus ihrer Gleichgewichtslage in den Modellrechnungen zur dynamischen Streutheorie nachgewiesen werden. Dies könnte neben den unregelmäßig angeordneten Si-Fehlstellen eine Ursache für das Ausbleiben des strukturell reversiblen Phasenübergangs von einer ($\sqrt{3}\times\sqrt{3}$)R30${\degree}$-Phase zu einer (3$\times$3)-Phase bei tiefen Temperaturen, wie er beispielsweise beim elektronisch vergleichbaren Adsorbatsystem Ge(111)-($\sqrt{3}\times\sqrt{3}$)R30${\degree}$-Sn auftritt, sein. N2 - In the scope of the present PhD thesis the correlations between the structural, electronic, and magnetic properties of rare earth-based intermetallic surface compounds are examined by means of different analysis methods on the basis of the two sample systems LaPt$_5$/Pt(111) and CePt$_5$/Pt(111). In addition, the structural properties of adsorbate-induced surface reconstructions in the sub-ML range in reduced dimensions on the semiconductor surface Si(111) are analyzed on the basis of the two material systems Si(111)-(5$\times$2)-Au and Si(111)-($\sqrt{3}\times\sqrt{3}$)R30${\degree}$-Sn with LEED-IV. The first experimental chapter of this thesis deals with the intermetallic surface compound LaPt$_5$/Pt(111). LaPt$_5$/Pt(111) forms when La atoms are deposited onto a clean Pt(111) substrate and subsequently thermal energy is applied. The thickness of the intermetallic film can be varied over the amount of La atoms offered before the alloying process and results in a total of six different diffraction patterns in LEED due to the lattice mismatch of Pt(111) and the LaPt$_5$ films on top. The superstructure vectors of the films formed are characterized by two different rotational orientations with respect to the lattice of the substrate and different lateral lattice constants of the films. The atomic structure can be traced back to a common crystal structure whose stoichiometry could be determined out of thickness dependent AES measurements to LaPt$_5$ with a Pt-rich surface termination layer. The results of a LEED-IV study confirm the growth of the films in the CaCu$_5$ structure, where the surface termination layer contains an additional Pt atom per unit cell compared to the bulk lattice. Additionally, this Pt atom protrudes from the surface by a value of \unit{0.26}{\angstrom}. The La atoms directly underneath the termination layer are shifted in opposite direction and therefore a locally changed symmetry prevails in the near surface region compared to the volume of the films and furthermore the electronic properties of the LaPt$_5$ films are affected. In addition, the vibrational properties of the LaPt$_5$ films were determined by means of polarized in situ Raman spectroscopy, in which the occurring vibrational peaks could be assigned to different depth regions of the LaPt$_5$ films (volume and surface) by knowledge of the detailed atomic structure and further considerations from group theory. In the second experimental chapter, the focus is put on the atomic structure and the electronic and magnetic properties of the Kondo- and heavy-fermion system CePt$_5$/Pt(111). Depending on the amount of Ce atoms offered before the alloying process on the Pt(111) substrate, a total of seven different LEED phases of the CePt$_5$ films could be identified, whose respective surface reconstructions are characterized by two different rotational orientations with respect to the Pt(111) substrate. Additionally the lateral lattice constant of the films are exposed to a process of stress and strain due to the lattice mismatch between film and substrate. A LEED-IV analysis confirms the growth of the films in the CaCu$_5$ structure with a Pt-rich surface termination layer whose Pt$_3$-Kagom\'{e} layer is filled with one additional Pt atom per unit cell compared to the bulk lattice. The structural results agree with results obtained in earlier studies and furthermore also illustrate the isostructural properties towards the intermetallic surface compound LaPt$_5$/Pt(111). The structural agreement between the two intermetallic surface compounds allows the determination of the $4f$ electrons induced phenomena with respect to the Kondo- and heavy-fermion behavior in CePt$_5$/Pt(111) by suitable comparative experiments on LaPt$_5$/Pt(111), since La atoms in their atomic structure do not contain $4f$ electrons. Spectra recorded with polarized in situ Raman spectroscopy of CePt$_5$ films with different film thicknesses contain both characteristic vibrational peaks and signatures of electronic transitions. The spectroscopic behavior of the vibrational peaks show similarities to LaPt$_5$/Pt(111) in the assignment of the vibrational modes to the respective depth regions in the CePt$_5$ films, but also differences occur, since one vibrational mode of CePt$_5$ is subject to an anomalous temperature behavior, which is attributed to the interaction with the $4f$ electrons. Further specific Raman signatures, which could be assigned to electronic transitions in form of level splitting of the $4f$ electron of the Ce atoms due to the crystal field of the Pt atoms, also originate from different depth regions of the CePt$_5$ films (surface, inner volume, interface). The magnetic properties of the CePt$_5$ films were analyzed with XAS and XMCD at the Ce M$_{4,5}$ edges as a function of temperature, angle of incidence, film thickness, and magnetic field strength. The prominent transitions in the inverse susceptibility between different Curie-Weiss regimes allow conclusions to be drawn about the crystal field splitting scheme, the Kondo- and RKKY-interactions and show a significant correlation with the Ce-valence. Furthermore, for all investigated CePt$_5$ film thicknesses in this thesis at low temperatures a transition to the coherent heavy-fermion state could be detected. By predicting a metamagnetic Lifshitz transition for these films, which is expressed in the magnetic field dependence of the magnetic moment, two further characteristic energy scales of the renormalized band structure could be accessed by recording magnetization curves at low temperatures and high magnetic fields. The third experimental chapter is devoted to the elucidation of the atomic structure of a quasi one-dimensional electron system with LEED and LEED-IV, in which the Au nanowires formed on the Si(111) surface can be described by a Si(111)-(5$\times$2)-Au reconstruction. The recorded LEED images include both a striking diffraction pattern and so-called diffraction streaks indicative for the existence of three equivalent rotational domains on the reconstructed surface, rotated by an angle of \unit{120}{\degree} against each other. In addition, the occurrence of diffraction streaks in the observed diffraction pattern could be explained through a theoretical simulation by the existence of three additional mirror domains on the surface, which introduce a phase shift of half a superstructure vector and should also be considered in a thorough LEED-IV analysis. From the structural models discussed vigorously in recent years in the literature after the introduction of a second recalibration of the necessary amount of Au atoms required for the formation of the Si(111)-(5$\times$2)-Au reconstruction, the geometry model established by Kwon and Kang (KK model) reflects best the observed energy-dependent intensity modulations in the experimental data when compared with calculated IV curves. For this model, the R-factor by Pendry always adopts its smallest value for the three energy series considered independently of each other at different angles of incidence of the electrons on the sample surface. Furthermore, even under explicit consideration of Si adatoms, which are additionally located on top of the reconstructed surface and can be described in a (5$\times$4) unit cell, the KK model remains the preferred structural model for the description of the Au chains formed and the Si honeycomb structure of the Si(111)-(5$\times$2)-Au surface reconstruction. In the final experimental chapter, a two-dimensional electron system -- the $\alpha$-Si(111)-($\sqrt{3}\times\sqrt{3}$)R30${\degree}$-Sn surface reconstruction, which is formed at a total coverage of 1/3 ML of Sn adsorbates on the Si(111) substrate -- is investigated with regard to the atomic structure at room temperature with LEED and LEED-IV. From a total of six structural models included in the analysis, in which the Sn atoms on an ideally terminated Si(111) surface occupy different adsorption sites within the reconstructed ($\sqrt{3}\times\sqrt{3}$)R30${\degree}$ unit cell, it was possible to exclude alloying such as observed for the $\gamma$- Si(111)-($\sqrt{3}\times\sqrt{3}$)R30${\degree}$-Sn phase. The Sn atoms rearrange exclusively on the surface and lead to a relaxation of the underlying substrate, whose atomic displacements can be traced back to the sixth Si layer. In comparison to earlier structural investigations conducted on this material system, the presented analysis confirms that the deposited Sn atoms are energetically favorably deposited at T$_4$ adsorption sites. Furthermore, the experimental data recorded at three different angles of incidence from different positions on the sample show indications of an existing and/or missing Si atom on a S$_5$ lattice site in the underlying Si(111) substrate. In addition, the theoretical prediction of the dynamic fluctuation model for this surface reconstruction could be proven in the model calculations of the dynamic scattering theory due to the very strongly increased thermal displacements of the Sn atoms from their equilibrium position. Besides from the irregularly arranged Si defects, this could be a hint for the absence of the reversible structural phase transition at low temperatures from a ($\sqrt{3}\times\sqrt{3}$)R30${\degree}$ phase to a (3$\times$3) phase, as it occurs in the electronically comparable adsorbate system Ge(111)-($\sqrt{3}\times\sqrt{3}$)R30${\degree}$-Sn. KW - Schwere-Fermionen-System KW - LEED KW - Magnetischer Röntgenzirkulardichroismus KW - Raman-Spektroskopie KW - Kristallfeld KW - dünne intermetallische Filme KW - geordnete Metalladsorbate auf Halbleiteroberflächen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192749 ER - TY - THES A1 - Schmitt, Stefan T1 - Adsorbatinduzierte richtungsabhängige Facettierung und selbstorganisierte Domänen-Musterbildung auf vizinalen Ag(111)-Oberflächen T1 - Adsorbate-induced facetting reconstruction and self-organized domain patterning of vicinal Ag(111) surfaces N2 - Die vorliegende Arbeit beschäftigt sich mit den strukturellen Aspekten einer adsorbat-induzierten Facettierung von vizinalen Ag(111)-Oberflächen. Bei dem Adsorbat handelte es sich um das organische Molekül Perylen-3,4,9,10-Tetracarbonsäure-Dianhydrid (PTCDA). Die Experimente wurden unter Ultrahochvakuum-Bedingungen durchgeführt, die Charakterisierung erfolgte hauptsächlich mit den Messmethoden Rastertunnelmikroskopie (STM) und niederenergetische Elektronenbeugung (LEED). Das planare Farbstoffmolekül PTCDA adsorbiert präferentiell an den Stufenkanten der verwendeten 8.5° Ag(111)-Vizinaloberflächen und induziert bei geeigneten Präparationsbedingungen eine Rekonstruktion in stark gestufte Facettenflächen und in stufenfreie (111)-Terrassen. Die beobachteten Facetten sind für das System PTCDA/Ag charakteristisch und stellen durch eine molekulare Überstruktur richtungsselektiv stabilisierte Ag-Kristallebenen dar. Durch die Variation der Stufenrichtung der Startoberfläche wurde eine Vielzahl von Facettentypen erhalten und nach Miller indiziert. In ihrer Gesamtheit erlauben sie einen Rückschluss auf das Aussehen der Gleichgewichtskristallform eines mit PTCDA bedeckten Ag-Kristalles und damit auf das richtungsabhängige Benetzungsverhalten von Ag. Aus der Sicht des Substrates bewirkt das Adsorbat eine massive Erhöhung der Steifheit der Stufen. Die durch eine molekulare Überstruktur stabilisierten Facettenflächen übernehmen die in der Kristallstruktur des Substrates angelegten Stufenrichtungen. Die gefundene Ausbildung von zwei typischen Facettensteigungen ist jedoch nicht durch die Ag-Kristallstruktur motivierbar. Die Facettierung wurde im Rahmen einer speziellen Adaption des Konzepts der Thermodynamik auf ebene gestufte Oberflächen als Orientierungsphasenseparation beschrieben. Dieses Konzept erlaubt eine korrekte Beschreibung der beobachteten lokalen Phänomene und zeigt zudem auf, dass das molekulare Gas, welches in den Messungen nicht erfasst wurde, eine wichtige Rolle bei der Rekonstruktion spielt. Es ergaben sich wichtige Indizien für die Existenz einer kritischen Inselgröße für PTCDA auf Ag(111). Es wurde eine vollständige strukturelle Analyse aller stabilen molekularen Überstrukturen auf vizinalen Ag(111)-Oberflächen durchgeführt. Es wurden insgesamt 16 solcher Überstrukturen gefunden, von denen bisher nur 3 Strukturen bekannt und veröffentlicht waren. Dichte und Kommensurabilität der Facettenüberstrukturen sind systematisch vom Stufentyp der Oberfläche abhängig. Die Frage nach dem Ursprung der beiden charakteristischen Facettensteigungen ist mit der Existenz von zwei Typen von Überstrukturgrenzen verknüpft. Die Grenze bestimmt die Lage der fischgrätartigen Überstruktur zu den Stufenkanten und die Länge und die Breite des Moleküls die beiden charakteristischen Stufenabstände. Letzteres geschieht vermöge einer lokalen Wechselwirkung der PTCDA-Moleküle mit den Stufen. Die Überstrukturgrenzen erweisen sich als wichtiges Element der Rekonstruktion. Es wurden außerdem die Abhängigkeiten der verschiedenen, aneinander angrenzenden Überstrukturen aufgezeigt. Auf den (111)-Terrassen fanden sich 3 metastabile Ausnahme-Strukturen, welche einen vertieften Einblick in die komplexe Bildungskinetik der bisher bekannten stabilen (111)-Struktur erlauben. Die Facetten bilden zusammen mit den benachbarten (111)-Terrassen regelmäßige, einem Reflexionsgitter ähnliche Muster mit einer Strukturweite von 5 bis 75nm. Die beobachteten Strukturweiten erreichen bei ausgedehntem Tempern typische Maximalwerte. STM-Messungen zeigen den Einfluss einer langreichweitigen Wechselwirkung zwischen den Facetten, vermittelt über elastische Eigenschaften des Substrates. Die Muster können als selbstorganisierte Zweiphasensysteme im thermodynamischen Gleichgewicht erklärt werden. Die Facetten wirken wie repulsiv wechselwirkende Defekte in einem elastischen Medium. Die Eignung dieser Muster als Templat wurde in Kooperation mit einer anderen Arbeitsgruppe am Beispiel der selektiven Deposition von Eisen belegt. N2 - This thesis investigates structural aspects of adsorbate-induced facetting of vicinal Ag(111) surfaces. It is mainly based on scanning tunneling microscope (STM) and low energy electron diffraction (LEED) experiments performed under UHV conditions. The planar dye-molecule perylene-3,4,9,10-tetracarboxilicacid-dianhydride (PTCDA) adsorbes preferentially at the step edges of the 8.5° Ag(111) vicinal surfaces used in the experiments. It causes a facetting reconstruction by the formation of (111) terraces and facets with a high step density. A variation of the step direction of the unreconstructed start surface revealed the existence of a variety of different facet types. Each of them is stabilized by a typical molecular superstructure. The facets observed are independent of the details of reconstruction and therefore characteristic for PTCDA on Ag. They can be used to predict the equilibrium crystal shape of PTCDA-covered Ag and the anisotropic wetting behavior of a Ag crystal. From the viewpoint of the substrate, the adsorbate superstructure causes a pronounced increase of the stiffness of the facet planes, but creates only steps with ''native'' directions. Moreover, two distinct preferential inclinations of facets were observed, which can only be explained by the selective influence of the adsorbate superstructure. In terms of thermodynamics, the facetting reconstruction can be described as an orientational phase separation, adapted to the constraints of planar surfaces. This concept is capable of explaining the local facetting phenomena. The formalism used predicts an important role of nucleation kinetics. This aspect is taken into account by introducing an additional phase of mobile molecules (2D molecular gas), which cannot be measured directly. Furthermore, strong arguments for the appearance of a critical island size for the PTCDA/Ag(111) superstructure were found. This work presents structural information of all stable superstructures of PTCDA on vicinal Ag(111) surfaces. Altogether 16 such superstructures were found, 3 of which had been observed and published before. Density and commensurability were found to systematically depend on the step-structure. The two preferred inclinations of facets are related to two characteristic types of domain boundaries of the herringbone superstructure to the adjacent (111)-terrace. Within the superstructure, local bonding of either one molecular species adhering perpendicular or one adhering parallel to the step-edge decides about the inclination of the surface. Consequently, the superstructure domain boundaries have profound influence on the details of the reconstruction. Additionally, under certain preparation conditions the (111) superstructure controls the facetting reconstruction. On the (111) terraces, small islands of metastable superstructures were found. A comparison with the well known stable (111) structure allows insight into the complex nucleation kinetics of this structure. Facets and (111) terraces form a regular grating-like domain pattern with a variable structural width of 5 to 75nm. This width saturates upon prolonged annealing. STM measurements show direct evidence for a long-range interaction between facet edges, causing a deformation of the surface between two facets. The domain patterns can be interpreted as two interacting phases in thermodynamic equilibrium and facets as interacting defects on an elastic surface. In cooperation with another group grating-like domain patterns on the nanometer-scale were used as a template for selective Fe adsorption. KW - Adsorbat KW - Perylendianhydrid KW - Überstruktur KW - Silber KW - Festkörperoberfläche KW - Selbstorganisation KW - Ag KW - Vizinal KW - Rekonstruktion KW - Molekül KW - Facette KW - Ag KW - vicinal KW - reconstruction KW - molecule KW - facet Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-25088 ER - TY - THES A1 - Kröger, Ingo T1 - Adsorption von Phthalocyaninen auf Edelmetalloberflächen T1 - Adsorption of phthalocyanines on noble metal surfaces N2 - In dieser Arbeit wurden methodenübergreifend die Adsorbatsysteme CuPc/Ag(111), CuPc/Au(111), CuPc/Cu(111), H2Pc/Ag(111) und TiOPc/Ag(111) untersucht und detailliert charakterisiert. Der Schwerpunkt der Experimente lag in der Bestimmung der lateralen geometrischen Strukturen mit hochauflösender Elektronenbeugung (SPA-LEED) und Rastertunnelmikroskopie (STM), sowie der Adsorptionshöhen mit der Methode der stehenden Röntgenwellenfeldern (NIXSW). Hochauflösende Elektronenenergieverlustspektroskopie (HREELS) wurde verwendet, um die vibronische Struktur und den dynamischen Ladungstransfer an der Grenzfläche zu charakterisieren. Die elektronische Struktur und der Ladungstransfer in die Moleküle wurde mit ultraviolett Photoelektronenspektroskopie (UPS) gemessen. Die wichtigsten Ergebnisse dieser Arbeit betreffen den Zusammenhang zwischen Adsorbat-Substrat Wechselwirkung und der Adsorbat-Adsorbat Wechselwirkung von Phthalocyaninen im Submonolagenbereich. N2 - In this thesis the adsorbate systems CuPc/Ag(111), CuPc/Au(111), CuPc/Cu(111), H2Pc and TiOPc/Ag(111) were investigated and characterized in great detail using complementary methods. The focus of the experiments was the determination of lateral geometric structures with spot-profile-analysis low energy electron diffraction (SPA-LEED) and scanning tunneling microscopy (STM), as well as the measurement of adsorption heights using the method of normal incidence x-ray standing waves (NIXSW). High resolution electron energy loss spectroscopy (HREELS) was used to characterize the vibronic properties of the molecule and the interface dynamical charge transfer (IDCT). The electronic structure and the charge transfer into the molecule were investigated with ultraviolet photoelectron spectroscopy (UPS). The most important results of this work are related with the interplay between adsorbate-substrate and adsorbate-adsorbate interaction of Phthalocyanines in the submonolayer regime. KW - Oberfläche KW - Edelmetall KW - Phthalocyanin KW - Adsorption KW - Oberflächenphysik KW - Adsorption KW - Phthalocyanine KW - CuPc KW - TiOPc KW - H2Pc KW - Ag(111) KW - Au(111) KW - Cu(111) KW - SPA-LEED KW - NIXSW KW - HREELS KW - STM KW - UPS KW - Paarpotentiale KW - surface science KW - adsorption KW - phthalocyanine KW - CuPc KW - TiOPc KW - H2Pc KW - Ag(111) KW - Au(111) KW - Cu(111) KW - SPA-LEED KW - NIXSW KW - HREELS KW - STM KW - UPS KW - pair potentials Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57225 ER - TY - THES A1 - Balzer, Christian T1 - Adsorption-Induced Deformation of Nanoporous Materials — in-situ Dilatometry and Modeling T1 - Adsorptionsinduzierte Deformation nanoporöser Materialien — in-situ Dilatometrie und Modellierung N2 - The goal of this work is to improve the understanding of adsorption-induced deformation in nanoporous (and in particular microporous) materials in order to explore its potential for material characterization and provide guidelines for related technical applications such as adsorption-driven actuation. For this purpose this work combines in-situ dilatometry measurements with in-depth modeling of the obtained adsorption-induced strains. A major advantage with respect to previous studies is the combination of the dilatometric setup and a commercial sorption instrument resulting in high quality adsorption and strain isotherms. The considered model materials are (activated and thermally annealed) carbon xerogels, a sintered silica aerogel, a sintered hierarchical structured porous silica and binderless zeolites of type LTA and FAU; this selection covers micro-, meso- and macroporous as well as ordered and disordered model materials. All sample materials were characterized by scanning electron microscopy, gas adsorption and sound velocity measurements. In-situ dilatometry measurements on mesoporous model materials were performed for the adsorption of N2 at 77 K, while microporous model materials were also investigated for CO2 adsorption at 273 K, Ar adsorption at 77 K and H2O adsorption at 298 K. Within this work the available in-situ dilatometry setup was revised to improve resolution and reproducibility of measurements of small strains at low relative pressures, which are of particular relevance for microporous materials. The obtained experimental adsorption and strain isotherms of the hierarchical structured porous silica and a micro-macroporous carbon xerogel were quantitatively analyzed based on the adsorption stress model; this approach, originally proposed by Ravikovitch and Neimark, was extended for anisotropic pore geometries within this work. While the adsorption in silica mesopores could be well described by the classical and analytical theory of Derjaguin, Broekhoff and de Boer, the adsorption in carbon micropores required for comprehensive nonlocal density functional theory calculations. To connect adsorption-induced stresses and strains, furthermore mechanical models for the respective model materials were derived. The resulting theoretical framework of adsorption, adsorption stress and mechanical model was applied to the experimental data yielding structural and mechanical information about the model materials investigated, i.e., pore size or pore size distribution, respectively, and mechanical moduli of the porous matrix and the nonporous solid skeleton. The derived structural and mechanical properties of the model materials were found to be consistent with independent measurements and/or literature values. Noteworthy, the proposed extension of the adsorption stress model proved to be crucial for the correct description of the experimental data. Furthermore, it could be shown that the adsorption-induced deformation of disordered mesoporous aero-/xerogel structures follows qualitatively the same mechanisms obtained for the ordered hierarchical structured porous silica. However, respective quantitative modeling proved to be challenging due to the ill-shaped pore geometry of aero-/xerogels; good agreement between model and experiment could only be achieved for the filled pore regime of the adsorption isotherm and the relative pressure range of monolayer formation. In the intermediate regime of multilayer formation a more complex model than the one proposed here is required to correctly describe stress related to the curved adsorbate-adsorptive interface. Notably, for micro-mesoporous carbon xerogels it could be shown that micro- and mesopore related strain mechanisms superimpose one another. The strain isotherms of the zeolites were only qualitatively evaluated. The result for the FAU type zeolite is in good agreement with other experiments reported in literature and the theoretical understanding derived from the adsorption stress model. On the contrary, the strain isotherm of the LTA type zeolite is rather exceptional as it shows monotonic expansion over the whole relative pressure range. Qualitatively this type of strain isotherm can also be explained by the adsorption stress model, but a respective quantitative analysis is beyond the scope of this work. In summary, the analysis of the model materials' adsorption-induced strains proved to be a suitable tool to obtain information on their structural and mechanical properties including the stiffness of the nonporous solid skeleton. Investigations on the carbon xerogels modified by activation and thermal annealing revealed that adsorption-induced deformation is particularly suited to analyze even small changes of carbon micropore structures. N2 - Ziel dieser Arbeit ist es, dass Verständnis der adsorptionsinduzierter Deformation von nanoporösen (insbesondere mikroporösen) Materialien zu erweitern, um ihr Potenzial für die Materialcharakterisierung zu erforschen. Zusätzlich sollen Orientierungshilfen für technische Anwendungen, wie z.B. adsorptionsgetriebene Aktuatoren, bereitgestellt werden. Hierfür kombiniert diese Arbeit in-situ Dilatometriemessungen und detaillierte Modellierung der gemessenen adsorptionsinduzierten Dehnungen. Der wesentliche Vorteil dieser Arbeit gegenüber vorherigen Studien ist die Kombination des dilatometrischen Messaufbaus mit einer kommerziellen Gasadsorptionsanlage, was die Messung qualitativ hochwertiger Adsorptions- und Dehnungsisothermen erlaubt. Die betrachteten Materialsysteme sind (aktivierte und geglühte) Kohlenstoffxerogele, ein gesintertes Silica-Aerogel, ein gesintertes, hierarchisch strukturiertes, poröses Silica und binderlose Zeolithe der Typen LTA und FAU. Diese Auswahl umfasst mikro-, meso- und makroporöse ebenso wie geordnete und ungeordnete Modellmaterialien. Alle Modellmaterialien wurden mit Rasterelektronenmikroskopie, Gasadsorption und Schallgeschwindigkeitsmessungen charakterisiert. In-situ Dilatometriemessungen an mesoporösen Modellsystemen wurden für N2-Adsorption bei 77 K durchgeführt, während alle mikroporösen Modellsysteme zusätzlich bei CO2-Adsorption (273 K), Ar-Adsorption (77 K) und H2O-Adsorption (298 K) untersucht wurden. Der verfügbare Messaufbau für in-situ Dilatometrie wurde im Rahmen dieser Arbeit weiterentwickelt, um Auflösung und Reproduzierbarkeit der Messungen von kleinen Dehnungen zu verbessern, was insbesondere für mikroporöse Materialien von Bedeutung ist. Die experimentellen Adsorptions- und Dehnungsisothermen des hierarchisch strukturierten, porösen Silicas und des mikro-makroporösen Kohlenstoff-Xerogels wurden mit dem adsorption-stress-Modell quantitativ ausgewertet. Hierfür wurde das adsorption-stress-Modell, ursprünglich eingeführt von Ravikovitch et al., für die Verwendung von anisotropen Porengeometrien erweitert. Während die der Deformation zu Grunde liegende Adsorption im Fall des mesoporösen Silicas gut mit der klassischen und analytischen Theorie von Derjaguin, Broekhoff und de Boer beschrieben werden konnte, erforderte die Adsorption in den Kohlenstoffmikroporen umfassende Berechnungen mittels nichtlokaler Dichtefunktionaltheorie. Um die adsorptionsinduzierten Spannungen mit entsprechenden Dehnungen zu korrelieren, wurden zusätzlich mechanische Modelle für die untersuchten Materialien entworfen. Das resultierende theoretische Konstrukt aus Adsorptions-, adsorption-stress- und mechanischem Modell wurde auf die ermittelten experimentellen Daten angewandt und strukturelle und mechanische Eigenschaften der Modellmaterialien bestimmt, d.h. Porengröße bzw. Porengrößenverteilung sowie die mechanischen Module der porösen Matrix und des unporösen Festkörperskeletts. Es konnte gezeigt werden, dass die ermittelten Materialeigenschaften konsistent mit unabhängigen Messungen und/oder Literaturwerten sind. Hierbei ist zu beachten, dass sich die Erweiterung des adsorption-stress-Modells für eine korrekte Auswertung der experimentellen Daten als zwingend erforderlich erwies. Des Weiteren konnte gezeigt werden, dass die adsorptionsinduzierte Deformation von ungeordneten mesoporösen Aero-/Xerogelstrukturen qualitativ denselben Mechanismen folgt, die für das geordnete, hierarchisch strukturierte, poröse Silica identifiziert wurden. Die entsprechende quantitative Modellierung erwies sich allerdings als schwierig, da die Poren in Aero-/Xerogelstrukturen geometrisch schlecht zu fassen sind. Gute Übereinstimmung zwischen Modell und Experiment konnte nur für das Stadium gefüllter Poren und den relativen Druckbereich der Monolagenbildung erzielt werden. Der Zwischenbereich der Multilagenadsorption erfordert ein komplexeres Modell, um die Spannung quantitativ korrekt zu beschreiben, die sich auf Grund der gekrümmten Adsorbat-Adsorptiv-Grenzfläche im Material ausbildet. Mit Hinblick auf mikro-mesoporöse Kohlenstoffxerogele konnte gezeigt werden, dass sich dort Deformationsmechanismen von Mikro- und Mesoporen überlagern. Die Dehnungsisothermen der Zeolithe wurden nur qualitativ ausgewertet. Das Ergebnis für den Zeolithen vom Typ FAU stimmt gut mit anderen in der Literatur beschriebenen Experimenten und dem theoretischen Verständnis überein, das sich aus dem adsorption-stress-Modell ergibt. Im Gegensatz dazu ist die gemessene Dehnungsisotherme des Zeolithen vom Typ LTA eher ungewöhnlich, da sie monotone Expansion des LTA-Zeolithen über den gesamten Druckbereich zeigt. Qualitativ kann dieses Ergebnis ebenfals mit dem adsorption-stress-Modell erklärt werden, aber eine detaillierte, quantitative Analyse übersteigt den Rahmen dieser Arbeit. Insgesamt erweist sich die Analyse der adsorptionsinduzierten Dehnungen der Modellmaterialien als geeignetes Mittel, um Informationen über deren strukturelle und mechanische Eigenschaften zu erlangen, was auch die Steifigkeit des unporösen Festkörperskeletts miteinschließt. Desweiteren zeigen Untersuchungen an aktivierten und geglühten Kohlenstoffxerogelen, dass adsorptionsinduzierte Deformation insbesondere geeignet ist, um kleine Änderungen an Mikroporenstrukturen zu analysieren. KW - Nanoporöser Stoff KW - Adsorption KW - Deformation KW - Dilatometrie KW - adsorption-induced deformation KW - density functional theory KW - adsorption KW - deformation KW - nanostructured KW - dilatometer KW - modeling Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-157145 ER - TY - THES A1 - Neumann, Daniel T1 - Advances in Fast MRI Experiments T1 - Neue Methoden in der MR-Bildgebung N2 - Magnetic Resonance Imaging (MRI) is a non-invasive medical imaging technique, that is rou- tinely used in clinical practice for detection and diagnosis of a wide range of different diseases. In MRI, no ionizing radiation is used, making even repeated application unproblematic. This is an important advantage over other common imaging methods such as X-rays and Computer To- mography. One major drawback of MRI, however, are long acquisition times and associated high costs of experiments. Since the introduction of MRI, several important technical developments have been made to successfully reduce acquisition times. In this work, novel approaches were developed to increase the efficiency of MRI acquisitions. In Chapter 4, an improved radial turbo spin-echo (TSE) combined acquisition and reconstruction strategy was introduced. Cartesian turbo spin-echo sequences [3] are widely used especially for the detection and diagnosis of neurological pathologies, as they provide high SNR images with both clinically important proton density and T2 contrasts. TSE acquisitions combined with radial sampling are very efficient, since it is possible to obtain a number of ETL images with different contrasts from a single radial TSE measurement [56–58]. Conventionally, images with a particular contrast are obtained from both radial and Cartesian TSE acquisitions by combining data from different echo times into a single image. In the radial case, this can be achieved by employing k-space weighted image contrast (KWIC) reconstruction. In KWIC, the center region of k-space is filled exclusively with data belonging to the desired contrast while outer regions also are assembled with data acquired at other echo times. However, this data sharing leads to mixed contrast contributions to both Cartesian and radial TSE images. This is true especially for proton density weighted images and therefore may reduce their diagnostic value. In the proposed method, an adapted golden angle reordering scheme is introduced for radial TSE acquisitions, that allows a free choice of the echo train length and provides high flexibility in image reconstruction. Unwanted contrast contaminations are greatly reduced by employing a narrow-band KWIC filter, that restricts data sharing to a small temporal window around the de- sired echo time. This corresponds to using fewer data than required for fully sampled images and consequently leads to images exhibiting aliasing artifacts. In a second step, aliasing-free images are obtained using parallel imaging. In the neurological examples presented, the CG-SENSE algorithm [42] was chosen due to its stable convergence properties and its ability to reconstruct arbitrarily sampled data. In simulations as well as in different in vivo neurological applications, no unwanted contrast contributions could be observed in radial TSE images reconstructed with the proposed method. Since this novel approach is easy to implement on today’s scanners and requires low computational power, it might be valuable for the clinical breakthrough of radial TSE acquisitions. In Chapter 5, an auto-calibrating method was introduced to correct for stimulated echo contribu- tions to T2 estimates from a mono-exponential fit of multi spin-echo (MSE) data. Quantification of T2 is a useful tool in clinical routine for the detection and diagnosis of diseases as well as for tis- sue characterization. Due to technical imperfections, refocusing flip angles in a MSE acquisition deviate from the ideal value of 180○. This gives rise to significant stimulated echo contributions to the overall signal evolution. Therefore, T2 estimates obtained from MSE acquisitions typically are notably higher than the reference. To obtain accurate T2 estimates from MSE acquisitions, MSE signal amplitudes can be predicted using the extended phase graph (EPG, [23, 24]) algo- rithm. Subsequently, a correction factor can be obtained from the simulated EPG T2 value and applied to the MSE T2 estimates. However, EPG calculations require knowledge about refocus- ing pulse amplitudes, T2 and T1 values and the temporal spacing of subsequent echoes. While the echo spacing is known and, as shown in simulations, an approximate T1 value can be assumed for high ratios of T1/T2 without compromising accuracy of the results, the remaining two parameters are estimated from the data themselves. An estimate for the refocusing flip angle can be obtained from the signal intensity ratio of the second to the first echo using EPG. A conventional mono- exponential fit of the MSE data yields a first estimate for T2. The T2 correction is then obtained iteratively by updating the T2 value used for EPG calculations in each step. For all examples pre- sented, two iterations proved to be sufficient for convergence. In the proposed method, a mean flip angle is extracted across the slice. As shown in simulations, this assumption leads to greatly reduced deviations even for more inhomogeneous slice profiles. The accuracy of corrected T2 values was shown in experiments using a phantom consisting of bottles filled with liquids with a wide range of different T2 values. While T2 MSE estimates were shown to deviate significantly from the spin-echo reference values, this is not the case for corrected T2 values. Furthermore, applicability was demonstrated for in vivo neurological experiments. In Chapter 6, a new auto-calibrating parallel imaging method called iterative GROG was pre- sented for the reconstruction of non-Cartesian data. A wide range of different non-Cartesian schemes have been proposed for data acquisition in MRI, that present various advantages over conventional Cartesian sampling such as faster acquisitions, improved dynamic imaging and in- trinsic motion correction. However, one drawback of non-Cartesian data is the more complicated reconstruction, which is ever more problematic for non-Cartesian parallel imaging techniques. Iterative GROG uses Calibrationless Parallel Imaging by Structured Low-Rank Matrix Completion (CPI) for data reconstruction. Since CPI requires points on a Cartesian grid, it cannot be used to directly reconstruct non-Cartesian data. Instead, Grappa Operator Gridding (GROG) is employed in a first step to move the non-Cartesian points to the nearest Cartesian grid locations. However, GROG requires a fully sampled center region of k-space for calibration. Combining both methods in an iterative scheme, accurate GROG weights can be obtained even from highly undersampled non-Cartesian data. Subsequently, CPI can be used to reconstruct either full k- space or a calibration area of arbitrary size, which can then be employed for data reconstruction with conventional parallel imaging methods. In Chapter 7, a new 2D sampling scheme was introduced consisting of multiple oscillating effi- cient trajectories (MOET), that is optimized for Compressed Sensing (CS) reconstructions. For successful CS reconstruction of a particular data set, some requirements have to be met. First, ev- ery data sample has to carry information about the whole object, which is automatically fulfilled for the Fourier sampling employed in MRI. Additionally, the image to be reconstructed has to be sparse in an arbitrary domain, which is true for a number of different applications. Last, data sam- pling has to be performed in an incoherent fashion. For 2D imaging, this important requirement of CS is difficult to achieve with conventional Cartesian and non-Cartesian sampling schemes. Ra- dial sampling is often used for CS reconstructions of dynamic data despite the streaking present in undersampled images. To obtain incoherent aliasing artifacts in undersampled images while at the same time preserving the advantages of radial sampling for dynamic imaging, MOET com- bines radial spokes with oscillating gradients of varying amplitude and alternating orientation orthogonal to the readout direction. The advantage of MOET over radial sampling in CS re- constructions was demonstrated in simulations and in in vivo cardiac imaging. MOET provides superior results especially when used in CS reconstructions with a sparsity constraint directly in image space. Here, accurate results could be obtained even from few MOET projections, while the coherent streaking artifacts present in the case of radial sampling prevent image recovery even for smaller acceleration factors. For CS reconstructions of dynamic data with sparsity constraint in xf-space, the advantage of MOET is smaller since the temporal reordering is responsible for an important part of incoherency. However, as was shown in simulations of a moving phantom and in the reconstruction of ungated cardiac data, the additional spatial incoherency provided by MOET still leads to improved results with higher accuracy and may allow reconstructions with higher acceleration factors. N2 - Die Magnetresonanztomographie (MRT) ist ein wichtiges nicht-invasives medizinisches Bildge- bungsverfahren, das im klinischen Alltag zur Entdeckung und Diagnose einer Vielzahl von Krank- heiten verwendet wird. Im Gegensatz zu anderen Methoden wie Röntgen und Computertomo- graphie kommt die MRT ohne den Einsatz ionisierender Strahlung aus, was selbst häufige An- wendungen ohne gesundheitliche Risiken erlaubt. Einer der größten Nachteile der MRT sind lange Messzeiten, die in Kombination mit der teuren Technik hohe Untersuchungskosten bedin- gen. Obwohl in der Vergangenheit durch die Entwicklung von sowohl verbesserter Hardware als auch neuen Rekonstruktionsverfahren bereits bedeutende Fortschritte in Bezug auf die Akquisi- tionsdauer erzielt werden konnten, ist eine weitere Beschleunigung nach wie vor ein wichtiges Forschungsgebiet im Bereich der MRT. Ziel dieser Arbeit war daher die Entwicklung neuer An- sätze zur Steigerung der Effizienz von MRT Experimenten. In Kapitel 4 wurde eine kombinierte Akquisitions- und Rekonstruktionsstrategie für radiale Turbo Spin-Echo (TSE) Experimente vorgestellt. Im klinischen Alltag sind kartesische TSE Sequenzen zur Untersuchung diverser Krankheitsbilder weit verbreitet, da sie ein hohes SNR aufweisen und die Aufnahme der klinisch wichtigen Bilder mit Protonendichte- und T2-Kontrast erlauben. Im Gegensatz zu kartesischem Abtasten, wo aus einem Datensatz lediglich ein Bild mit bes- timmtem Kontrast erzeugt wird, sind radiale TSE Akquisitionen hocheffizient, da hier aus einem Datensatz mehrere Bilder mit verschiedenem Kontrast gewonnen werden können. In beiden Fällen wird in konventionellen Rekonstruktionsmethoden jedes Bild eines definierten Kontrasts durch das Zusammensetzen eines vollständig abgetasteten k-Raums mit Daten von verschiedenen Echozeiten erzeugt. Im radialen Fall geschieht dies durch die sogenannte "k-space weighted im age contrast" (KWIC) Rekonstruktion. Hierbei wird das Zentrum des k-Raums ausschließlich mit zum gewünschten Kontrast gehörigen Daten gefüllt, während die äußeren Bereiche des k-Raums auch Daten von anderen Echozeiten enthalten. Obwohl der Kontrast von MRT Bildern haupt- sächlich von den Daten im k-Raum Zentrum dominiert wird, führt die Kombination von Daten verschiedener Echozeiten in sowohl radialen als auch kartesischen TSE Bildern zu einem uner- wünschten Mischkontrast. Dieser Effekt wird vor allem in protonendichtegewichteten Bildern sichtbar und kann somit deren diagnostischen Wert deutlich verringern. Ein unerwünschter Mischkontrast kann verhindert werden, indem die Bandbreite des KWIC- Filters auf ein kleines zeitliches Fenster um die angestrebte Echozeit herum eingeschränkt wird. Um eine freie Wahl der Echozuglänge und hohe Flexibilität in der Bildrekonstruktion zu er- möglichen, wurde für die radiale TSE Akquisition ein angepasstes Abtastschema unter Verwen- dung des goldenen Winkels vorgestellt. Da bei einem KWIC-Filter mit reduzierter Bandbre- ite für jedes Bild weniger Daten zur Verfügung stehen als für einen voll abgetasteten k-Raum benötigt, weisen rekonstruierte Bildern Einfaltungsartefakte auf. Diese werden in einem zweiten Schritt durch die Anwendung paralleler Bildgebung beseitigt. In den gezeigten Beispielen wurde dazu der CG-SENSE Algorithmus verwendet, da er stabile Konvergenz aufweist und für die Rekonstruktion von Daten mit irregulären Abtastschema angewandt werden kann. Anschließend werden bestehende Korrelationen der Bilderserie zur Reduktion verbleibender Artefakte und zu einer Verbesserung des SNR ausgenutzt. Wie mittels Simulationen gezeigt und für neurologische Daten bestätigt, weisen radiale TSE Bilder, die mit dieser Methode rekonstruiert wurden, keinen sichtbaren Mischkontrast mehr auf. Die erreichte Bildqualität ist hierbar vergleichbar mit kon- ventionellen Rekonstruktionsmethoden. Da die vorgestellte Rekonstruktion einfach auf heutigen Scannern implementiert werden kann und lediglich niedrige Rechenkapazitäten benötigt, könnte sie einen wichtigen Beitrag für den klinischen Durchbruch radialer TSE Akquisitionen darstellen. In Kapitel 5 wurde eine selbstkalibrierende Methode zur Korrektur von aus Multi Spin-Echo (MSE) Bildern gewonnenen T2 Karten vorgestellt. In der klinischen Anwendung spielt die Quan- tifizierung von T2 unter anderem bei der Diagnose von Krankheiten sowie bei der Klassifizierung von Gewebe eine wichtige Rolle. Eine MSE Sequenz verwendet mehrere RF-Pulse, um ein einzelnes Spin-Echo wiederholt zu refokussieren. Idealerweise betragen die Flipwinkel der Re- fokussierungspulse hierbei exakt 180○, um einen exponentiellen Signalabfall zu erhalten. Auf- grund technischer Ungenauigkeiten weichen die Werte der Flipwinkel von Refokussierungspulsen jedoch grundsätzlich von 180○ ab. Niedrigere Flipwinkel führen zu stimulierten Echos, die wesentlich zu den einzelnen Echoamplituden beitragen und den Signalabfall entlang des Echozugs deutlich verlängern können. Somit weisen auch T2 Werte, die aus solchen Bilderserien berech- net werden, eine teilweise deutliche Erhöhung auf. Um exakte Werte zu erhalten, kann der MSE Signalverlauf mittels des "extended phase graph" (EPG) Algorithmus abgeschätzt und so ein Kor- rekturfaktor ermittelt werden. Hierzu müssen die Flipwinkel der Refokussierungspulse, T1 und T2 Werte sowie der zeitliche Abstand der Echos (ESP) bekannt sein. Wie in Simulationen gezeigt wurde, kann T1 für hohe Werte des Quotienten T1/T2 abgeschätzt werden, ohne an Genauigkeit der T2 Ergebnisse einzubüßen. Abschätzungen der verbleibenden benötigten Parameter können direkt aus den Daten selbst gewonnen werden. Während der Flipwinkel aus den Intensitäten der ersten beiden Echos berechnet wird, liefert ein mono-exponentieller Fit der MSE Bilderserie eine erste Näherung für T2. Die Korrektur für die T2 Werte kann anschließend aus den EPG Sig- nalverläufen berechnet werden. Durch Aktualisierung von T2 und erneuter Ausführung des EPG-Algorithmus wird die Genauigkeit der Korrektur iterativ erhöht, wobei schon eine sehr geringe Zahl von Iterationen zu Konvergenz führt. Wie in Simulationen und in Phantomexperimenten für verschiedenste T2-Werte gezeigt, weisen korrigierte T2 Werte eine hohe Genauigkeit auf. Dies gilt auch für niedrigere nominelle Flipwinkel als 180○ und ist somit von speziellem Interesse bei höheren Feldstärken B0, wo Grenzwerte der spezifischen Absorptionsrate die Einstrahlung einer Vielzahl von RF-Pulsen hoher Amplitude verbietet. In Kapitel 6 wurde iteratives GROG, eine neue selbstkalibrierende iterative parallele Bildge- bungsmethode für die Rekonstruktion von nichtkartesischen Daten vorgestellt. Es sind eine Vielzahl nichtkartesischer Trajektorien für MRT Messungen bekannt, die zahlreiche Vorteile gegenüber kartesischer Bildgebung bieten. Dazu gehören unter anderem eine schnellere Akquisi- tion, verbesserte dynamische Bildgebung sowie die Möglichkeit zur intrinischen Bewegungskor- rektur. Ein Nachteil nichtkartesischer Daten jedoch ist eine aufwendigere Rekonstruktion, sowohl bei voll abgetasteten Datensätzen als insbesondere auch in der parallelen Bildgebung. Itera- tives GROG verwendet Calibrationless Parallel Imaging by Structured Low-Rank Matrix Com- pletion (CPI) zur Rekonstruktion fehlender Daten. Diese Methode benötigt Daten auf karte- sischen Gitterpunkten und kann nicht direkt für nichtkartesische Experimente angewandt wer- den. Stattdessen werden die nichtkartesischen Daten zunächst mittels Grappa Operator Gridding (GROG) in einem ersten Schritt auf ein kartesisches Gitter verschoben. GROG basiert auf paral- leler Bildgebung und benötigt einen voll abgetasteten Teil des k-Raums zur Kalibrierung. Erste Kalibrationsdaten können gewonnen werden, indem die nichtkartesischen Punkte ohne Änderung auf die nächsten kartesischen Gitterpunkte verschoben werden und eine CPI-Rekonstruktion eines zentralen k-Raum Bereichs durchgeführt wird. Anschließend wird GROG angewandt um exakte Werte der kartesischen Gitterpunkte zu erhalten und der Prozess wird iteriert. Nach Kon- vergenz können entweder Kalibrationsdaten gewünschter Größe für eine konventionelle parallele Bildgebungsmethode erzeugt oder artefaktfreie Bilder mit CPI rekonstruiert werden. In Kapitel 7 wurde ein neues Abtastungsschema für die 2D Bildgebung vorgestellt, das aus Multiplen Oszillierenden Effizienten Trajektorien (MOET) besteht und optimierte Compressed Sensing (CS) Rekonstruktionen ermöglicht. Für eine erfolgreiche Anwendung von Compressed Sensing müssen einige Voraussetzungen erfüllt sein. Erstens muss jeder Datenpunkt Informa- tionen über das ganze Objekt enthalten, was bei der MRT aufgrund der Datenakquisition im Fourier-Raum automatisch erfüllt ist. Weiterhin muss das gemessene Objekt in einer beliebigen Basis sparse sein. Dies ist für viele verschiedene Anwendungen in der MRT der Fall. Drittens muss für CS Rekonstruktionen die Datenakquisition im k-Raum einem inkohärenten Muster fol- gen. Diese wichtige Voraussetzung ist in der zweidimensionalen Bildgebung mit konventionellen kartesischen und nicht-kartesischen Abtastschemata nur schwer zu erreichen. Deshalb wird für CS Rekonstruktionen häufig eine radiale Trajektorie eingesetzt, trotz der kohärenten streaking- Artefakte in unterabgetasteten Bildern. MOET verwendet daher eine Kombination von radialen Projektionen zusammen mit oszillierenden Gradienten auf der zur Ausleserichtung orthogonalen Achse. So erhält man inkohärente Aliasing-Artefakte und bewahrt gleichzeitig die Vorteile der radialen Bildgebung für die dynamische MRT. Die Überlegenheit von MOET gegenüber radi- aler Bildgebung für CS Rekonstruktionen konnte in Simulationen sowie in der Herzbildgebung aufgezeigt werden. Dies gilt insbesondere für CS Rekonstruktionen direkt im Bildraum, wo MOET gute Resultate liefert während die kohärenten Artefakte bei radialer Bildgebung eine genaue Bildwiederherstellung verhindert. Bei Rekonstruktionen dynamischer Daten, wo Sparsität im xf-Raum ausgenutzt wird, ist der Vorteil von MOET weniger ausgeprägt, da hier bere- its die zeitliche Anordnung der Projektionen einen wesentlichen Beitrag zur Charakteristik der Aliasingartefakte liefert. Wie in Simulationen und für die in vivo Herzbildgebung gezeigt werden konnte, erlaubt die zusätzliche räumliche Inkohärenz von MOET jedoch auch in diesem Fall eine höhere Genauigkeit sowie Rekonstruktionen von Daten höherer Beschleunigung. KW - Kernspintomografie KW - Parallele Bildgebung KW - nichtkarthesische Bildgebung KW - Turbo Spin-Echos KW - Compressed Sensing KW - Parallel Imaging KW - non-Cartesian Imaging KW - Compressed Sensing KW - MRI KW - MRT KW - NMR-Tomographie Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-108165 ER - TY - THES A1 - Seiberlich, Nicole T1 - Advances in Non-Cartesian Parallel Magnetic Resonance Imaging using the GRAPPA Operator T1 - Fortschritte in der nicht-kartesischen parallelen Magnetresonanztomographie mittels des GRAPPA-Operators N2 - Magnetic Resonance Imaging (MRI) is an imaging modality which provides anatomical or functional images of the human body with variable contrasts in an arbitrarily positioned slice without the need for ionizing radiation. In MRI, data are not acquired directly, but in the reciprocal image space (otherwise known as k-space) through the application of spatially variable magnetic field gradients. The k-space is made up of a grid of data points which are generally acquired in a line-by-line fashion (Cartesian imaging). After the acquisition, the k-space data are transformed into the image domain using the Fast Fourier Transformation (FFT). However, the acquisition of data is not limited to the rectilinear Cartesian sampling scheme described above. Non-Cartesian acquisitions, where the data are collected along exotic trajectories, such as radial and spiral, have been shown to be beneficial in a number of applications. However, despite their additional properties and potential advantages, working with non-Cartesian data can be complicated. The primary difficulty is that non-Cartesian trajectories are made up of points which do not fall on a Cartesian grid, and a simple and fast FFT algorithm cannot be employed to reconstruct images from non-Cartesian data. In order to create an image, the non-Cartesian data are generally resampled on a Cartesian grid, an operation known as gridding, before the FFT is performed. Another challenge for non-Cartesian imaging is the combination of unusual trajectories with parallel imaging. This thesis has presented several new non-Cartesian parallel imaging methods which simplify both gridding and the reconstruction of images from undersampled data. In Chapter 4, a novel approach which uses the concepts of parallel imaging to grid data sampled along a non-Cartesian trajectory called GRAPPA Operator Gridding (GROG) is described. GROG shifts any acquired k-space data point to its nearest Cartesian location, thereby converting non-Cartesian to Cartesian data. The only requirements for GROG are a multi-channel acquisition and a calibration dataset for the determination of the GROG weights. Chapter 5 discusses an extension of GRAPPA Operator Gridding, namely Self-Calibrating GRAPPA Operator Gridding (SC-GROG). SC-GROG is a method by which non-Cartesian data can be gridded using spatial information from a multi-channel coil array without the need for an additional calibration dataset, as required in standard GROG. Although GROG can be used to grid undersampled datasets, it is important to note that this method uses parallel imaging only for gridding, and not to reconstruct artifact-free images from undersampled data. Chapter 6 introduces a simple, novel method for performing modified Cartesian GRAPPA reconstructions on undersampled non-Cartesian k-space data gridded using GROG to arrive at a non-aliased image. Because the undersampled non-Cartesian data cannot be reconstructed using a single GRAPPA kernel, several Cartesian patterns are selected for the reconstruction. Finally, Chapter 7 discusses a novel method of using GROG to mimic the bunched phase encoding acquisition (BPE) scheme. In MRI, it is generally assumed that an artifact-free image can be reconstructed only from sampled points which fulfill the Nyquist criterion. However, the BPE reconstruction is based on the Generalized Sampling Theorem of Papoulis, which states that a continuous signal can be reconstructed from sampled points as long as the points are on average sampled at the Nyquist frequency. A novel method of generating the “bunched” data using GRAPPA Operator Gridding (GROG), which shifts datapoints by small distances in k-space using the GRAPPA Operator instead of employing zig-zag shaped gradients, is presented in this chapter. With the conjugate gradient reconstruction method, these additional “bunched” points can then be used to reconstruct an artifact-free image from undersampled data. This method is referred to as GROG-facilitated Bunched Phase Encoding, or GROG-BPE. N2 - Die Magnetresonanztomographie (MRT) ist ein nichtinvasives bildgebendes Verfahren ohne Strahlenbelastung und eignet sich zur biomedizinischen Darstellung verschiedener Gewebetypen mit hoher räumlicher Auflösung und sehr gutem Kontrastverhalten. In der MRT erfolgt die Datenaufnahme im reziproken Bildraum – auch k-Raum genannt - welcher typischerweise entlang eines diskreten kartesischen Gitters abgetastet wird. Ein Bild erhält man schließlich durch eine schnelle Fouriertransformation der aufgenommenen k-Raum-Daten. Neben den kartesischen Akquisitionsschemata haben sich in den letzten Jahren auch vereinzelt nichtkartesische MRT-Verfahren in der klinischen Routine durchgesetzt. Solche nichtkartesischen Trajektorien erreichen eine hohe Abtasteffizienz, was zu einer Verkürzung der Messzeit führt. Die Schwierigkeit im Umgang mit nichtkartesischen Trajektorien liegt vor allem in der Tatsache begründet, dass nichtkartesisch akquirierte Datensätze vor Anwendung der schnellen Fouriertransformation auf ein kartesisches Gitter transformiert werden müssen („Gridding“). Hierzu gibt es eine Vielzahl von Verfahren, die von zahlreichen Parametern abhängen, womit ein hoher Aufwand und hohe Fehleranfälligkeit verbunden sind. Ein weiterer Nachteil dieser Gridding-Methoden ist, dass sie auf unvollständig aufgenommene Datensätze nicht angewendet werden können. Alternativ zu den konventionellen MR-Verfahren haben sich in den letzten Jahren die sogenannten parallelen Bildgebungsmethoden (beispielsweise SENSE oder GRAPPA) in der klinischen MRT etabliert, die mittlerweile von nahezu allen Herstellerfirmen kommerziell zur Verfügung gestellt werden. Die parallele Bildgebung erlaubt es, die Bildmesszeiten um einen Faktor 2 bis 4 zu verkürzen und lässt sich prinzipiell auf jede beliebige Bilgebungsmethode anwenden ohne dabei das Kontrastverhalten zu beeinflussen. In der klinischen Routine ist diese Technik allerdings lediglich auf kartesische MRT-Verfahren beschränkt, und es ist bisher noch nicht gelungen, die Vorteile der nichtkartesischen MRT-Verfahren optimal mit den Leistungsmerkmalen der parallelen MRT zu verknüpfen. Ziel dieser Arbeit war es, neue und effiziente Strategien zu entwickeln, um die nichtkartesische Magnetresonanztomographie für ein breiteres Anwendungsspektrum in der klinischen Praxis zu etablieren. Neben der Rekonstruktion von herkömmlich aufgenommenen nichtkartesischen Datensätzen sollten auch Verfahren entwickelt werden, die eine Kombination mit Messzeitverkürzungen durch parallele MRT-Verfahren erlauben. In Kapitel 4 wird ein neues paralleles Bildgebungsverfahren zum Gridding nichtkartesischer Datensätze namens „GRAPPA Operator Gridding“ (GROG) vorgestellt. GROG benutzt GRAPPA-ähnliche Gewichtungsfaktoren, um die nichtkartesischen Punkte auf ein kartesisches Gitter zu schieben. Im Gegensatz zu anderen Gridding-Methoden (wie beispielsweise dem „Convolution-Gridding“) werden bei der Anwendung von GROG Parameter wie Faltungskerne, Regularisierungswerte oder Funktionen nicht benötigt. Dies führt nicht nur zu einer erheblichen Vereinfachung des Griddingprozesses, sondern auch zur deutlichen Reduktion der Rechenoperationen. In Kapitel 5 wird eine Erweiterung des GROG-Algorithmus vorgestellt, welche ohne Kalibrierungsdatensätze auskommt („Self-Calibrating GROG“, SC-GROG). Die Gewichtungsfaktoren für die Verschiebungen der Datenpunkte werden in dieser Methode aus den akquirierten Punkten selbst gewonnen. Die erste Anwendung von GROG zur Vereinfachung der Rekonstruktion unvollständig aufgenommener nichtkartesischer Datensätze ist in Kapitel 6 beschrieben. Die Verwendung von GROG zur Transformation der unvollständig aufgenommenen nichtkartesischen Daten auf ein kartesisches Gitter erlaubt es, anschließend einen modifizierten GRAPPA-Algorithmus anzuwenden, und somit nichtkartesische Datensätze aus beschleunigten Experimenten zu rekonstruieren. Schließlich wurde GROG in Kapitel 7 auf die „Bunched Phase Encoding“ (BPE)-Methode angewendet. Bereits zuvor wurde gezeigt, dass das BPE-Verfahren in Verbindung mit einem „Conjugate Gradient“ Rekonstruktionsverfahren eine deutliche Verkürzung der Messzeit gestattet. Basierend auf dem verallgemeinerten Abtasttheorem nach Papoulis werden die Daten bei diesem Verfahren entlang einer extrem schnell oszillierenden Trajektorie aufgenommen. Nach Papoulis ermöglicht die lokal höhere Datendichte eine artefaktfreie Bildrekonstruktion trotz Unterabtastung in anderen k-Raumbereichen. Allerdings werden dabei erhebliche Ansprüche an die Gradienten-Hardware des Tomographen gestellt, wodurch das Konzept auf geringe Beschleunigungsfaktoren beschränkt wird. Im Rahmen dieser Arbeit konnte jedoch gezeigt werden, dass es möglich ist, auf dieses aufwändige Abtastschema zu verzichten, indem lediglich entlang einer regulären nicht-oszillierenden Trajektorie akquiriert wird und die höhere Datendichte nachträglich mittels GROG erreicht wird (GROG-BPE). KW - NMR-Tomographie KW - Bildgebendes Verfahren KW - Parallele Bildgebung KW - nicht-kartesische Bildgebung KW - Magnetic Resonance Imaging KW - Parallel Imaging KW - non-Cartesian Imaging KW - Image Reconstruction Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28321 ER - TY - THES A1 - Sochor, Benedikt T1 - Aggregation behavior of Pluronic P123 in bulk solution and under confinement at elevated temperatures near its cloud point T1 - Aggregationsverhalten von Pluronic P123 in Lösung und an Grenzflächen bei hohen Temperaturen nahe des Trübungspunktes N2 - This thesis aims to investigate the form-phase diagram of aqueous solutions of the triblock copolymer Pluronic P123 focusing on its high-temperature phases. P123 is based on polyethylene as well as polypropylene oxide blocks and shows a variety of di erent temperaturedependent micelle morphologies or even lyotropic liquid crystal phases in aqueous solutions. Besides the already well-studied spherical aggregates at intermediate temperatures, the size and internal structure of both worm-like and lamellar micelles, which appear near the cloud point, is determined using light, neutron and X-ray scattering. By combining the results of time-resolved dynamic light as well as small-angle neutron and X-ray scattering experiments, the underlying structural changes and kinetics of the sphere-to-worm transition were studied supporting the random fusion process, which is proposed in literature. For temperatures near the cloud point, it was observed that aqueous P123 solutions below the critical crystallization concentration gelate after several hours, which is linked to the presence and structure of polymeric surface layers on the sample container walls as shown by neutron re ectometry measurements. Using a hierarchical model for the lamellar micelles including their periodicity as well as domain and overall size, it is possible to unify the existing results in literature and propose a direct connection between the near-surface and bulk properties of P123 solutions at temperatures near the cloud point. N2 - Ziel dieser Dissertation ist die Untersuchung des Form-Phasendiagrams des Dreiblock-Co- polymers Pluronic P123 mit dem besonderen Fokus auf dessen Phasenverhalten bei hohen Temperaturen. P123 besteht aus Polyethylen- und Polypropylenoxid-Blöcken und zeigt in wässriger Lösung vielfältige, temperaturabhängige Mizellformen oder sogar Flüssigkristallphasen. Neben den bereits intensiv untersuchten sphärischen Aggregaten bei mittleren Temperaturen, werden die Größen und inneren Strukturen der wurmartigen und lamellearen Aggregate mittels Licht-, Neutronen- und Röntgenstreumethoden untersucht, welche nahe des Trübungspunktes der Lösungen auftreten. Durch die Kombination von zeitaufgelösten dynamischen Licht- und Kleinwinkelstreuung-Experimenten wurden die strukturellen Änderungen und kinetischen Prozesse während des Kugel-Wurm-Übergangs untersucht, welche den bereits in der Literatur vorgeschlagenen zufälligen Fusionsprozess weiter bestätigen. Es wurde beobachtet, dass wässrige P123-Lösungen unterhalb der kritischen Kristallisationskonzentration nach mehreren Stunden gelieren, was durch Neutronenreflektometrie mit dem Auftreten und der Struktur von oberflächennahen Monolagen auf den Messzellwänden in Verbindung gebracht wurde. Wenn ein hierarchisches Model für die lamellaren Mizellen verwendet wird, das deren Periodizität, Domänen- und Gesamtgröße berücksichtigt, ist es außerdem möglich, die bisherigen Ergebnisse in der Literatur zu vereinigen und eine direkte Verbindung zwischen dem Aggregationsverhalten von P123 auf Oberflächen und in Lösung bei Temperaturen nahe des Trübungspunktes zu ziehen. KW - Weiche Materie KW - Polymerlösung KW - Micelle KW - Röntgenstreuung KW - Neutronenstreuung KW - Soft matter KW - worm-like micelles KW - lamellar micelles KW - neutron reflectometry KW - SAXS KW - SANS KW - DLS KW - Pluronic KW - P123 Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-246070 ER - TY - THES A1 - Gerhard, Sven T1 - AlGaInP-Quantenpunkte für optoelektronische Anwendungen im sichtbaren Spektralbereich T1 - AlGaInP Quantum Dots for Optoelectronic Applications in the Visible Spectral Range N2 - Die Arbeit beschäftigt sich mit der Herstellung und Charakterisierung von AlGaInP Quantenpunkten auf GaP und GaAs-Substrat. Auf Basis dieser Quantenpunkte wurden Halbleiterlaser auf GaAs hergestellt, welche bei Raumtemperatur zwischen 660 nm und 730 nm emittierten. Die Untersuchung von Breitstreifenlasern, welche aus diesen Strukturen gefertigt wurden, legen nahe, dass man mithilfe eines höheren Aluminiumanteils in größeren Quantenpunkten bei vergleichbarer Wellenlänge Laser mit besseren Eigenschaften realisieren kann. Weiterhin wurden in dieser Arbeit Quantenpunkten auf GaP-Substrat untersucht, welche in AlGaP eingebettet wurden. Da diese Quantenpunkte in Barrieren eingebettet sind, welche eine indirekte Bandlücke besitzen, ergibt sich ein nicht-trivialer Bandverlauf innerhalb dieser Strukturen. In dieser Arbeit wurden numerische 3D-Simulationen verwendet, um den Bandverlauf zu berechnen, wobei Verspannung und interne Felder berücksichtigt wurden und auch die Grundzustandswellenfunktionen ermittelt wurden. Ein eingehender Vergleich mit dem Experiment setzt die gemessenen Emissionswellenlängen und -intensitäten mit berechneten Übergangsenergien und Überlappintegralen in Verbindung. N2 - The scope of this work is the fabrication and characterization of AlGaInP quantum dots on GaP an GaAs substrates. Based on such quantum dots, semiconductor lasers have been realized, emitting between 660 nm and 730 nm at room temperature. The examination of broad-area lasers processed on these structures suggests that active layers of larger quantum dots with higher aluminium contents lead to lasers with better performance at similar emission wavelength. Additionally, quantum dots grown on GaP substrates have been characterized, that were embedded in AlGaP barriers. Since these barriers exhibit an indirect bandgap, a non-trivial band alignment within these structures is expected. In this work, numerical 3D-simulations are employed to calculate the band alignment including strain and internal fields. Also, ground state wavefunctions of charge carriers have been determined. A thorough comparison between theory and experiment connects the measured emission wavelength and luminescence intensities with calculated transition energies and wavefunction overlaps. KW - Quantenpunkt KW - Drei-Fünf-Halbleiter KW - Optoelektronik KW - AlGaInP KW - AlGaInP KW - quantum dot KW - gallium phosphide KW - Galliumphosphid KW - Laser Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-76174 ER - TY - JOUR A1 - Simin, D. A1 - Soltamov, V. A. A1 - Poshakinskiy, A. V. A1 - Anisimov, A. N. A1 - Babunts, R. A. A1 - Tolmachev, D. O. A1 - Mokhov, E. N. A1 - Trupke, M. A1 - Tarasenko, S. A. A1 - Sperlich, A. A1 - Baranov, P. G. A1 - Dyakonov, V. A1 - Astakhov, G. V. T1 - All-Optical dc Nanotesla Magnetometry Using Silicon Vacancy Fine Structure in Isotopically Purified Silicon Carbide JF - Physical Review X N2 - We uncover the fine structure of a silicon vacancy in isotopically purified silicon carbide (4H-\(^{28}\)SiC) and reveal not yet considered terms in the spin Hamiltonian, originated from the trigonal pyramidal symmetry of this spin-3/2 color center. These terms give rise to additional spin transitions, which would be otherwise forbidden, and lead to a level anticrossing in an external magnetic field. We observe a sharp variation of the photoluminescence intensity in the vicinity of this level anticrossing, which can be used for a purely all-optical sensing of the magnetic field. We achieve dc magnetic field sensitivity better than 100  nT/√Hz within a volume of 3×10\(^{−7}\)mm\(^3\) at room temperature and demonstrate that this contactless method is robust at high temperatures up to at least 500 K. As our approach does not require application of radio-frequency fields, it is scalable to much larger volumes. For an optimized light-trapping waveguide of 3  mm\(^3\), the projection noise limit is below 100  fT/√Hz. KW - condensed matter physics KW - optoelectronics KW - spintronics Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-147682 VL - 6 ER - TY - JOUR A1 - Dietrich, Christof P. A1 - Steude, Anja A1 - Tropf, Laura A1 - Schubert, Marcel A1 - Kronenberg, Nils M. A1 - Ostermann, Kai A1 - Höfling, Sven A1 - Gather, Malte C. T1 - An exciton-polariton laser based on biologically produced fluorescent protein JF - Science Advances N2 - Under adequate conditions, cavity polaritons form a macroscopic coherent quantum state, known as polariton condensate. Compared to Wannier-Mott excitons in inorganic semiconductors, the localized Frenkel excitons in organic emitter materials show weaker interaction with each other but stronger coupling to light, which recently enabled the first realization of a polariton condensate at room temperature. However, this required ultrafast optical pumping, which limits the applications of organic polariton condensates. We demonstrate room temperature polariton condensates of cavity polaritons in simple laminated microcavities filled with biologically produced enhanced green fluorescent protein (eGFP). The unique molecular structure of eGFP prevents exciton annihilation even at high excitation densities, thus facilitating polariton condensation under conventional nanosecond pumping. Condensation is clearly evidenced by a distinct threshold, an interaction-induced blueshift of the condensate, long-range coherence, and the presence of a second threshold at higher excitation density that is associated with the onset of photon lasing. KW - polarition condensate KW - enhanced green fluorescent protein KW - photon lasing KW - quantum physics Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-171305 VL - 2 IS - 8 ER - TY - THES A1 - Baß, Utz T1 - Analysis of MBE-grown II-VI Hetero-Interfaces and Quantum-Dots by Raman Spectroscopy T1 - Analyse von MBE-gewachsenen II-VI Heterogrenzschichten und Quantenpunkten mittels Ramanspektroskopie N2 - The material system of interest in this thesis are II-VI-semiconductors. The first part of this thesis focuses on the formation of self-assembled CdSe-based quantum dots (QD) on ZnSe. The lattice constants of ZnSe and CdSe differ as much as about 7\% and therefore a CdSe layer grown on top of ZnSe experiences a huge strain. The aspired strain relief constitutes in the self-assembly of QDs (i.e. a roughened layer structure). Additionally, this QD layer is intermixed with Zn as this is also a possibility to decrease the strain in the layer. For CdSe on ZnSe, in Molecular Beam Epitaxy (MBE), various QD growth procedures were analysed with respect to the resulting Cd-content of the non-stoichiometric ternary (Zn,Cd)Se. The evaluation was performed by Raman Spectroscopy as the phonon frequency depends on the Cd-content. The second part of the thesis emphasis on the interface properties of n-ZnSe on n-GaAs. Different growth start procedures of the ZnSe epilayer may lead to different interface configurations with characteristic band-offsets and carrier depletion layer widths. The analysis is mainly focused on the individual depletion layer widths in the GaAs and ZnSe. This non-destructive analysis is performed by evaluating the Raman signal which comprises of phonon scattering from the depleted regions and coupled plasmon-phonon scattering from regions with free carriers. N2 - Im Rahmen dieser Dissertation wurden II-VI Halbleiter untersucht. Der erste Teil behandelt die Selbstorganisation von CdSe basierten Quantenpunkten auf ZnSe. Die Gitterkonstante von ZnSe und CdSe differieren um ca. 7% und daher erfährt eine CdSe Schicht auf ZnSe eine riesige Verspannung. Der angestrebte Abbau dieser Verspannung resultiert in der Selbstorganisation von Quantenpunkten (bzw. einer rauen CdSe-Oberfläche). Zusätzlich bietet die Durchmischung mit Zn eine weitere Möglichkeit die Verspannung zu senken. In der Arbeit wurde mittels Raman Spektroskopie der Einfluss von verschiedenen MBE-Wachstumsmethoden auf den resultierenden Cd-Gehalt der Quantenpunktschicht untersucht. Im zweiten Teil standen die Grenzflächeneigenschaften von n-ZnSe auf n-GaAs im Fokus. Unterschiedliche Wachstumsmethoden dieser Grenzflächen können sich auf verschiedene Eigenschaften auswirken. Insbesondere in der Ausbildung von Verarmungszonen innerhalb der beiden Materialien an der Grenzfläche. Hierzu kam auch Raman Spektroskopie zum Einsatz da sich das Raman Signal aus Streubeiträgen von Phononen aus den verarmten Zonen und aus gekoppelten Plasmon-Phonon Moden aus den Schichten mit freien Ladungsträgern zusammensetzt. KW - Zwei-Sechs-Halbleiter KW - Molekularstrahlepitaxie KW - self-assembly KW - quantum-dots KW - Raman KW - plasmon KW - phonon KW - Wide-gap-Halbleiter KW - n-Halbleiter Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-73413 ER - TY - JOUR T1 - Analysis of the Wtb vertex from the measurement of triple-differential angular decay rates of single top quarks produced in the \(t\)-channel at \(\sqrt{s}\) = 8 TeV with the ATLAS detector JF - Journal or High Energy Physics N2 - The electroweak production and subsequent decay of single top quarks in the \(t\)-channel is determined by the properties of the \({Wtb}\) vertex, which can be described by the complex parameters of an effective Lagrangian. An analysis of a triple-differential decay rate in \(t\)-channel production is used to simultaneously determine five generalised helicity fractions and phases, as well as the polarisation of the produced top quark. The complex parameters are then constrained. This analysis is based on 20.2 fb\(^{−1}\) of proton-proton collision data at a centre-of-mass energy of 8 TeV collected with the ATLAS detector at the LHC. The fraction of decays containing transversely polarised \(W\) bosons is measured to be \(f_1\) = 0.30 ± 0.05. The phase between amplitudes for transversely and longitudinally polarised \(W\) bosons recoiling against left-handed \(b\)-quarks is measured to be \(\delta\)_ = 0.002\(\pi^{+0.016\pi}_{+0.017\pi}\), giving no indication of CP violation. The fractions of longitudinal or transverse \(W\) bosons accompanied by right-handed \(b\)-quarks are also constrained. Based on these measurements, limits are placed at 95% CL on the ratio of the complex coupling parameters Re [\({g_R/V_L}\) \(\in\) [−0.12, 0.17] and Im [\({g_R/V_L}\) \(\in\) [−0.07, 0.06]. Constraints are also placed on the ratios |\({V_R}/{V_L}\)| and |\({g_L}/{V_L}\)|. In addition, the polarisation of single top quarks in the \(t\)-channel is constrained to be \(P\) > 0.72 (95% CL). None of the above measurements make assumptions about the value of any of the other parameters or couplings and all of them are in agreement with the Standard Model. KW - High energy physics KW - Electroweak interaction KW - Hadron-Hadron scattering (experiments) KW - Top physics Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-172310 VL - 2017 IS - 17 ER - TY - JOUR A1 - Kraus, Hannes A1 - Heiber, Michael C. A1 - Väth, Stefan A1 - Kern, Julia A1 - Deibel, Carsten A1 - Sperlich, Andreas A1 - Dyakonov, Vladimir T1 - Analysis of Triplet Exciton Loss Pathways in PTB7:PC\(_{71}\)BM Bulk Heterojunction Solar Cells JF - Scientific Reports N2 - A strategy for increasing the conversion efficiency of organic photovoltaics has been to increase the VOC by tuning the energy levels of donor and acceptor components. However, this opens up a new loss pathway from an interfacial charge transfer state to a triplet exciton (TE) state called electron back transfer (EBT), which is detrimental to device performance. To test this hypothesis, we study triplet formation in the high performing PTB7:PC\(_{71}\)BM blend system and determine the impact of the morphology-optimizing additive 1,8-diiodoctane (DIO). Using photoluminescence and spin-sensitive optically detected magnetic resonance (ODMR) measurements at low temperature, we find that TEs form on PC\(_{71}\)BM via intersystem crossing from singlet excitons and on PTB7 via EBT mechanism. For DIO blends with smaller fullerene domains, an increased density of PTB7 TEs is observed. The EBT process is found to be significant only at very low temperature. At 300 K, no triplets are detected via ODMR, and electrically detected magnetic resonance on optimized solar cells indicates that TEs are only present on the fullerenes. We conclude that in PTB7:PC\(_{71}\)BM devices, TE formation via EBT is impacted by fullerene domain size at low temperature, but at room temperature, EBT does not represent a dominant loss pathway. KW - solar cells KW - electronic properties and materials Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-147413 VL - 6 IS - 29158 ER - TY - THES A1 - Bauer, Wolfgang Rudolf T1 - Analytische Näherungsverfahren zur Beschreibung der nuklearen Spin-Dephasierung T1 - Analytical Approaches for the Description of Nuclear Spin Dephasing N2 - Die Dynamik der Kernspindephasierung in lebenden Systemen enhält relevante Informationen über biologisch wichtige Parameter, wie Sauerstoffversorgung, Mikrozirkulation, Diffusion etc.. Ursächlich für die Dephasierung sind Interaktionen des Spins mit fluktuierenden Magnetfeldern. Notwendig sind also Modelle, welche diese Interaktionen mit den biologisch relevanten Parametern in Beziehung setzen. Problematisch ist, daß fast alle analytische Ansätze nur in extremen Dynamikbereichen der Störfeldfluktuationen (motional narrowing - , static dephasing limit) gültig sind. In dieser Arbeit zeigen wir einen Ansatz, mit dem man die Dynamik der Störfeldfluktuationen erheblich vereinfachen und trotzdem noch deren wesentliche Eigenschaften beibehalten kann. Dieser Ansatz ist nicht auf einen speziellen Dynamikbereich festgelegt. Angewendet wird dieses Näherungsverfahren zur Beschreibung der Spin Dephasierung im Herzmuskel. Die Relaxationszeiten erhält man als Funktion der Kapillardichte und Blutoxygenierung. Vergleiche mit numerisch errechneten Daten anderer, eigenen Messungen am menschlichen Herzen und experimentellen Befunden in der Literatur, bestätigen die theoretischen Vorhersagen. N2 - The dynamics of nuclear spin dephasing in living objects contains relevant information about important parameters as oxygen supply, microcirculation, and diffusion. Spin dephasing is induced by interaction of spins with fluctuating perturbation fields. Desirable are models which relate these interactions to the biological parameters. Unfortunately most analytical approaches are restricted to certain motion regimes, e.g. the motional narrowing or static dephasing limit. In this work we present an analytical approach, which simplifies the perturbation field dynamics but still conserves its relevant properties. This approach is not restricted to any motion regime. As an application we describe spin dephasing in the cardiac muscle. We obtain the relaxation time as a function of capillary density and blood oxygenation. Data are in excellent agreement with numerical simulations of others, own measurements in humans, and experimental data in the literature. KW - Biologisches System KW - NMR-Bildgebung KW - Spinrelaxation KW - Näherungsverfahren KW - Spin Relaxation KW - Magnetresonanz KW - MR KW - Herz KW - Durchblutung KW - spin dephasing KW - magnetic resonance KW - perfusion KW - T2 KW - cardiac imaging Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4674 ER - TY - THES A1 - Schielein, Richard T1 - Analytische Simulation und Aufnahmeplanung für die industrielle Röntgencomputertomographie T1 - Analytical simulation and acquisition planning for industrial x-ray computed tomography N2 - Röntgencomputertomographie (CT) hat in ihrer industriellen Anwendung ein sehr breites Spektrum möglicher Prüfobjekte. Ziel einer CT-Messung sind dreidimensionale Abbilder der Verteilung des Schwächungskoeffizienten der Objekte mit möglichst großer Genauigkeit. Die Parametrierung eines CT-Systems für ein optimales Messergebnis hängt stark vom zu untersuchenden Objekt ab. Eine Vorhersage der optimalen Parameter muss die physikalischen Wechselwirkungen mit Röntgenstrahlung des Objektes und des CT-Systems berücksichtigen. Die vorliegende Arbeit befasst sich damit, diese Wechselwirkungen zu modellieren und mit der Möglichkeit den Prozess zur Parametrierung anhand von Gütemaßen zu automatisieren. Ziel ist eine simulationsgetriebene, automatische Parameteroptimierungsmethode, welche die Objektabhängigkeit berücksichtigt. Hinsichtlich der Genauigkeit und der Effizienz wird die bestehende Röntgensimulationsmethodik erweitert. Es wird ein Ansatz verfolgt, der es ermöglicht, die Simulation eines CT-Systems auf reale Systeme zu kalibrieren. Darüber hinaus wird ein Modell vorgestellt, welches zur Berechnung der zweiten Ordnung der Streustrahlung im Objekt dient. Wegen des analytischen Ansatzes kann dabei auf eine Monte-Carlo Methode verzichtet werden. Es gibt in der Literatur bisher keine eindeutige Definition für die Güte eines CT-Messergebnisses. Eine solche Definition wird, basierend auf der Informationstheorie von Shannon, entwickelt. Die Verbesserungen der Simulationsmethodik sowie die Anwendung des Gütemaßes zur simulationsgetriebenen Parameteroptimierung werden in Beispielen erfolgreich angewendet beziehungsweise mittels Referenzmethoden validiert. N2 - Industrial X-ray computed tomography (CT) can be applied to a large variety of different specimens. The result of a CT measurement is a three-dimensional image containing the position-dependent attenuation coefficient of the specimen. For an optimal imaging CT-measurement parameters depend on both the properties of the CT-System and the specimen. To predict such an optimal parameterization both the physical interactions with X-rays of the CT-System and the specimen, must be taken into account. This thesis sets out to address the modelling of the interactions as well as the automatization of the parameter finding. The latter is based on a figure of merit for CT-measurements. Aim is a simulation-based, automatic parameter optimization method which includes the object-dependency on distinct specimens. The currently existing X-ray simulation methods are enhanced with respect to accuracy and efficiency. Therefore a method for the calibration of the simulation to a real CT-system is presented. Additionally, a model for second order X-ray scattering is developed in order to calculate the specimen-scattered radiation. This is done using an analytical ansatz and no Monte-Carlo method has to be applied. So far, no universal definition of a figure of merit for CT-results has been given in literature. Using Shannon's information theory such a definition is developed. The improvements of the simulation method and the application of the figure of merit for simulation-based parameter optimization are used in examples or are validated using reference methods. KW - Computertomografie KW - Zerstörungsfreie Werkstoffprüfung KW - Optimierung KW - Aufnahmeplanung KW - Analytische Simulation KW - CT KW - Computersimulation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-169236 ER - TY - THES A1 - Wang, Tungte T1 - Anatomische und funktionelle Magnetresonanztomographie der menschlichen Lunge T1 - Anatomical and Functional 1H Magnetic Resonance Imaging of the Human Lung N2 - Zur Beurteilung der Lungenanatomie wurde das MT-STIR-Verfahren vorgestellt. Es wurde gezeigt, dass das MT-STIR-Verfahren das störende Signal des umgebenden Muskelgewebes effektiv unterdrückt und damit die Visualisierung des Lungenparenchyms verbessert. Im Vergleich zu konventionellen anatomischen 1H-MR-Verfahren wie IR- und MIR-Verfahren erhöht das MT-STIR-Verfahren das Signal-zu-Rausch-Verhältnis (SNR) des Lungenparenchyms signifikant und vermeidet den Signalausfall des Lungenparenchyms aufgrund der pathologischen Verkürzung der Lungen-T1-Relaxationszeit auf ca. 900 ms wie bei Patienten mit Mukoviszidose (CF), so dass sowohl große Lungenperfusionsdefekte in Patienten mit CF als auch kleine ungefährliche Lungenentzündungen in „gesunden“ Probanden durch das MT-STIR-Verfahren gut dargestellt werden können. Für die indirekte, aber quantitative Beurteilung der Lungenventilation wurde die oben genannte schnelle quantitative Lungen-T1-Mapping-Technik während der Inhalation eines Atemgasgemisches mit verschiedenen O2-Konzentrationen (21%, 40%, 60%, 80% und 100%) eingesetzt. Dabei ist im Blut physikalisch gelöster Sauerstoff leicht paramagnetisch und dient als Blut-T1-verkürzendes MR-Kontrastmittel (KM). In der Lunge ist das Blut die Hauptquelle des freien Wassers, so dass Lungen-T1-Werte nach dem Zwei-Kompartimente-Schnellaustausch-Modell der Lungen-T1-Relaxationszeit durch den Blut-T1-Wert beeinflusst werden. Die zugehörige Theorie, ein O2-gestütztes Lungen-T1-Modell, wurde aus der Lungenphysiologie und den T1-Relaxationsmechanismen hergeleitet und zeigt, dass bei Probanden die Lungen-T1-Verkürzung von 21% O2 zu 100% O2 ca. 11% beträgt und die Beziehung zwischen dem Lungen-R1 (= 1/T1)-Wert und der inhalierten O2-Konzentration linear mit einer Steigung von 0,12 1/s und einem R1-Achsenabschnitt von 0,70 1/s ist. Die Steigung wurde im Rahmen dieser Doktorarbeit als oxygen transfer function (OTF) definiert und ist vom gasaustauschbestimmenden Ventilations-Perfusions- und Diffusions-Perfusions-Verhältnis abhängig, so dass sie praktisch ein Maß für den pulmonalen Gasaustausch darstellt. Experimentell wurde gezeigt, dass Lungen-T1-Werte bei 100% O2 um 10% kürzer als bei 21% O2 sind, was gut mit dem O2-gestützten Lungen-T1-Modell übereinstimmt. Weiterhin wurde die OTF dadurch bestimmt, dass die gemessenen Lungen-R1-Werte gegen die inhalierte O2-Konzentration aufgetragen wurden und eine Gerade an die Messpunkte angepasst wurde. Gesundes Lungenparenchym von Probanden und gut perfundiertes Lungenparenchym von Patienten mit CF zeigten OTF-Werte zwischen 0,10 und 0,14 1/s, R1-Achsenabschnitte zwischen 0,70 und 0,80 1/s und ausgezeichnete Korrelationskoeffizienten von annähernd 1,00, was mit dem O2-gestützten Lungen-T1-Modell übereinstimmt. Schlecht perfundiertes Lungenparenchym von Patienten mit CF zeigte eindeutig erniedrigte OTF-Werte, erhöhte R1-Achsenabschnitte und schlechte Korrelationskoeffizienten. Das O2-gestützte Lungen-T1-Mapping-Verfahren zeigt eine hohe Reproduzierbarkeit. Zur Beurteilung der Lungenperfusion wurde eine quantitative Perfusionsmapping-Technik mittels Protonen-Spin-Labeling, ohne Verwendung eines intravenösen Kontrastmittels wie Gadolinium (Gd)-DTPA, vorgestellt. Aus einer nicht-schichtselektiven (globalen) T1-Map und einer schichtselektiven T1-Map derselben Lungenschicht, die jeweils mit der oben genannten schnellen quantitativen Lungen-T1-Mapping-Technik akquiriert wurde, wurde eine Perfusionamap berechnet, wobei jedes Pixel in der Perfusionsmap eine Perfusionsrate in Einheiten von m/100g/min hat. Es wurde demonstriert, dass die hintere coronale Lungenschicht eine höhere Perfusionsrate als die vordere coronale Lungenschicht desselben Probanden hatte, als er in Rückenlage gemessen wurde, was den Gravitationseffekt auf die Lungenperfusion bestätigt. Die berechneten Perfusionsraten des gut perfundierten Lungenparenchyms von Probanden und von Patienten mit CF lagen zwischen 400 und 600 m/100g/min, die gut mit dem Literaturwert übereinstimmen. Die berechneten Perfusionsraten des schlecht perfundierten Lungenparenchyms von Patienten mit CF waren niedriger als 200 m/100g/min. Die Spin-Labeling-Technik zeigte eine hohe Reproduzierbarkeit und niedrige relative Fehler der berechneten Perfusionsraten. N2 - The purpose of this doctoral thesis is to develop noninvasive and clinically feasible methods for assessment of pulmonary anatomy, pulmonary function and cardiac shunts in the human using proton magnetic resonance imaging (1H MRI). All imaging experiments were performed on a commercial 1.5-T whole-body MR scanner. In Chapter 2, an efficient tissue suppression technique is presented which allows one to significantly enhance lung parenchyma visibility. A short inversion time inversion recovery (STIR) experiment combined with a magnetization transfer (MT) experiment was used for magnetization preparation in order to suppress the signal from muscle. A half-Fourier single-shot turbo spin-echo (HASTE) sequence was used as an acquisition module. This approach was used to perform lung anatomical imaging in healthy volunteers and patients with cystic fibrosis (CF). The results obtained demonstrate that with MT-STIR approach high quality human lung images can be obtained and that this approach has the potential for the evaluation of lung pathologies. In Chapter 3, a rapid and robust technique for quantitative T1 mapping of the human lung using an IR SnapshotFLASH sequence is presented. Based on a series of SnapshotFLASH images acquired after a single inversion pulse, high quality and quantitative T1 parameter maps acquired were obtained in under five seconds from healthy volunteers and patients with CF. The measured T1 values of healthy lung parenchyma ranged from 1100 to 1400 ms and are in good agreement with previously reported literature values. The measured T1 values of diseased lung parenchyma in patients with CF ranged from 800 to 1000 ms and correlated with reduced regional pulmonary blood volume and blood flow as confirmed by qualitative gadolinium (Gd)-DTPA-enhanced MR pulmonary perfusion imaging. Indirect qualitative MRI of pulmonary ventilation is feasible using the paramagnetic effects of oxygen physically dissolved in blood. In Chapter 4, a more quantitative oxygen-enhanced pulmonary function test based on the slope of a plot of R1 vs. oxygen concentration  the oxygen transfer function (OTF)  was developed and tested in a pool of healthy volunteers and patients with CF. The lung T1 relaxation rate, R1, under normoxic conditions (room air, 21% O2) and the response to various hyperoxic conditions (40% – 100% O2) were studied. Lung T1 in healthy volunteers showed a relatively homogeneous distribution while they breathed room air and a homogeneous decrease under hyperoxic conditions. This T1 decrease from breathing room air to 100% O2 was statistically significant at P < 0.0001. Lung T1 in patients with CF showed an inhomogeneous distribution while they breathed room air and the observed lung T1 decrease under hyperoxia depended on the actual state of the diseased lung tissue. In the selected group of patients with CF, areas with reduced OTF also showed reduced perfusion, as confirmed by qualitative Gd-DTPA-enhanced MR pulmonary perfusion imaging. In Chapter 5, the feasibility and reproducibility of a noninvasive, rapid and quantitative pulmonary perfusion mapping method was evaluated using a two-compartment tissue model in combination with proton spin labeling within the imaging slice. Global and selective lung T1 maps were acquired from each subject. Quantitative perfusion maps were calculated from the global and selective T1 maps. The measured perfusion rates of the upper right lung in volunteers ranged from 400 to 600 m/100g/min. In patients with CF, perfusion defects detected using Gd-DTPA-enhanced MRI were also detected using the spin labeling method. The perfusion rates of diseased lung tissues were less than 200 m/100g/min. The proposed method showed a high intra-study reproducibility and low relative errors. In the first part of Chapter 6, a clinical protocol combining anatomical 1H MRI with the assessment of both OTF and pulmonary perfusion was established for the human lung and applied to patients with CF. In the selected group of patients with CF, areas with reduced oxygen enhancement showed reduced perfusion as confirmed by spin labeling perfusion imaging. These functional imaging results also correlated with anatomical MT-STIR-HASTE imaging results. The results demonstrate that this completely noninvasive clinical protocol has potential for clinical applications in the serial diagnosis of lung diseases such as CF. In the second part of Chapter 6, we compared pulmonary function before and after smoking by measuring arterial blood T1 and lung T1 using the clinical protocol. The results revealed that after smoking, both arterial blood and lung showed no significant changes in OTF, while arterial blood T1 was reduced and the pulmonary perfusion rate was increased. KW - Lungenfunktionsprüfung KW - NMR-Tomographie KW - 1H MRT KW - Lunge KW - Herzshuntdiagnostik KW - funktionell KW - anatomisch KW - 1H MRI KW - lung KW - cardiac shunt KW - functional KW - anatomical Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14867 ER - TY - JOUR A1 - Dauth, M. A1 - Wiessner, M. A1 - Feyer, V. A1 - Schöll, A. A1 - Puschnig, P. A1 - Reinert, F. A1 - Kuemmel, S. T1 - Angle resolved photoemission from organic semiconductors: orbital imaging beyond the molecular orbital interpretation JF - New Journal of Physics N2 - Fascinating pictures that can be interpreted as showing molecular orbitals have been obtained with various imaging techniques. Among these, angle resolved photoemission spectroscopy (ARPES) has emerged as a particularly powerful method. Orbital images have been used to underline the physical credibility of the molecular orbital concept. However, from the theory of the photoemission process it is evident that imaging experiments do not show molecular orbitals, but Dyson orbitals. The latter are not eigenstates of a single-particle Hamiltonian and thus do not fit into the usual simple interpretation of electronic structure in terms of molecular orbitals. In a combined theoretical and experimental study we thus check whether a Dyson-orbital and a molecular-orbital based interpretation of ARPES lead to differences that are relevant on the experimentally observable scale. We discuss a scheme that allows for approximately calculating Dyson orbitals with moderate computational effort. Electronic relaxation is taken into account explicitly. The comparison reveals that while molecular orbitals are frequently good approximations to Dyson orbitals, a detailed understanding of photoemission intensities may require one to go beyond the molecular orbital picture. In particular we clearly observe signatures of the Dyson-orbital character for an adsorbed semiconductor molecule in ARPES spectra when these are recorded over a larger momentum range than in earlier experiments. KW - Dyson orbitals KW - electronic structure KW - PTCDA KW - AG(110) KW - density-functional theory KW - approximation KW - energies KW - monolayers KW - spectroscopy KW - NTCDA KW - ARPES KW - orbital imaging KW - photoemission spectroscopy Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-115180 SN - 1367-2630 VL - 16 ER - TY - JOUR T1 - Angular analysis of B-d(0) -> K* µ\(^+\)μ\(^-\) decays in \({pp}\) collisions at root s=8 TeV with the ATLAS detector JF - Journal of High Energy Physics N2 - An angular analysis of the decay B-d(0) -> K*mu(+)mu(-) is presented, based on proton-proton collision data recorded by the ATLAS experiment at the LHC. The study is using 20.3 fb(-1) of integrated luminosity collected during 2012 at centre-of-mass energy of root s = 8TeV. Measurements of the K* longitudinal polarisation fraction and a set of angular parameters obtained for this decay are presented. The results are compatible with the Standard Model predictions. KW - Hadron-Hadron scattering (experiments) KW - K* µ+μ− KW - B-0 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-220670 VL - 47 ER - TY - THES A1 - Pappert, Katrin T1 - Anisotropies in (Ga,Mn)As - Measurement, Control and Application in Novel Devices T1 - Anisotropien in (Ga,Mn)As - Messung, Kontrolle und Anwendung in neuartigen Bauelementen N2 - Ferromagnetic semiconductors (FS) promise the integration of magnetic memory functionalities and semiconductor information processing into the same material system. The prototypical FS (Ga,Mn)As has become the focus of semiconductor spintronics research over the past years. The spin-orbit mediated coupling of magnetic and semiconductor properties in this material gives rise to many novel transport-related phenomena which can be harnessed for device applications. In this thesis we address challenges faced in the development of an all-semiconductor memory architecture. A starting point for information storage in FS is the knowledge of their detailed magnetic anisotropy. The first part of this thesis concentrates on the investigation of the magnetization behaviour in compressively strained (Ga,Mn)As by electrical means. The angle between current and magnetization is monitored in magnetoresistance(MR) measurements along many in-plane directions using the Anisotropic MR(AMR) or Planar Hall effect(PHE). It is shown, that a full angular set of such measurements displayed in a color coded resistance polar plot can be used to identify and quantitatively determine the symmetry components of the magnetic anisotropy of (Ga,Mn)As at 4 K. We compile such "anisotropy fingerprints" for many (Ga,Mn)As layers from Wuerzburg and other laboratories and find the presence of three symmetry terms in all layers. The biaxial anisotropy term with easy axes along the [100] and [010] crystal direction dominates the magnetic behaviour. An additional uniaxial term with an anisotropy constant of ~10% of the biaxial one has its easy axis along either of the two <110> directions. A second contribution of uniaxial symmetry with easy axis along one of the biaxial easy axes has a strength of only ~1% of the biaxial anisotropy and is therefore barely visible in standard SQUID measurements. An all-electrical writing scheme would be desirable for commercialization. We report on a current assisted magnetization manipulation experiment in a lateral (Ga,Mn)As nanodevice at 4 K (far below Tc). Reading out the large resistance signal from DW that are confined in nanoconstrictions, we demonstrate the current assisted magnetization switching of a small central island through a hole mediated spin transfer from the adjacent leads. One possible non-perturbative read-out scheme for FS memory devices could be the recently discovered Tunneling Anisotropic MagnetoResistance (TAMR) effect. Here we clarify the origin of the large amplification of the TAMR amplitude in a device with an epitaxial GaAs tunnel barrier at low temperatures. We prove with the help of density of states spectroscopy that a thin (Ga,Mn)As injector layer undergoes a metal insulator transition upon a change of the magnetization direction in the layer plane. The two states can be distinguished by their typical power law behaviour in the measured conductance vs voltage tunneling spectra. While all hereto demonstrated (Ga,Mn)As devices inherited their anisotropic magnetic properties from their parent FS layer, more sophisticated FS architectures will require locally defined FS elements of different magnetic anisotropy on the same wafer. We show that shape anisotropy is not applicable in FS because of their low volume magnetization. We present a method to lithographically engineer the magnetic anisotropy of (Ga,Mn)As by submicron patterning. Anisotropic strain relaxation in submicron bar structures (nanobars) and the related deformation of the crystal lattice introduce a new uniaxial anisotropy term in the energy equation. We demonstrate by both SQUID and transport investigations that this lithographically induced uniaxial anisotropy overwrites the intrinsic biaxial anisotropy at all temperatures up to Tc. The final section of the thesis combines all the above into a novel device scheme. We use anisotropy engineering to fabricate two orthogonal, magnetically uniaxial, nanobars which are electrically connected through a constriction. We find that the constriction resistance depends on the relative orientation of the nanobar magnetizations, which can be written by an in-plane magnetic field. This effect can be explained with the AMR effect in connection with the field line patterns in the respective states. The device offers a novel non-volatile information storage scheme and a corresponding non-perturbative read-out method. The read out signal is shown to increase drastically in samples with partly depleted constriction region. This could be shown to originate in a magnetization direction driven metal insulator transition of the material in the constriction region. N2 - Ferromagnetische Halbleiter (FS) versprechen die Integration von magnetischen Eigenschaften für Speicheranwendungen und halbleitenden Eigenschaften zur Informationsverarbeitung innerhalb des selben Materialsystems. (Ga,Mn)As ist als Modellsystem in den letzten Jahren in den Fokus der Halbleiterspintronik gerückt. Die Kopplung der magnetischen und elektrischen Eigenschaften über die Spin-Bahn-Wechselwirkung ist die Ursache vieler neuer Transportphänomene. Sie sind Grundlage neuartiger Anwendungen und Bauteildesigns. In dieser Arbeit beschäftigen wir uns mit den Herausforderungen, die die Entwicklung einer halbleitenden Speicherarchitektur mit sich bringt. Die Kenntnis der magnetischen Anisotropie ist die Grundlage für die magnetische Informationsspeicherung. Der erste Teil der Arbeit beschäftigt sich deshalb mit der Untersuchung des Verhaltens der Magnetisierung in kompressiv verspannten (Ga,Mn)As Schichten durch elektrische Messungen. Bei Magnetfeld-Scans entlang vieler Richtungen in der Schichtebene wird der von Strom und Magnetisierung eingeschlossene Winkel mittels des Anisotropen Magnetowiderstandseffektes(AMR) oder des Planaren Hall Effektes(PHE) beobachtet. Eine winkelabhängige Reihe solcher Messungen, dargestellt in einem farbkodierten Widerstandspolardiagramm, wird zur Identifizierung und quantitativen Bestimmung der Symmetriekomponenten der magnetischen Anisotropie bei 4 K verwendet. Solche „Anisotropiefingerabdrücke" von vielen (Ga,Mn)As Schichten aus Würzburg und anderen Laboratorien bestätigen das Vorhandensein von drei Anisotropiekomponenten bei 4 K. Der vierzählige Anteil mit weichen Achsen entlang der [100] und [010] Kristallrichtung dominiert die magnetischen Eigenschaften. Ein weiterer Anteil, mit zweizähliger Symmetrie, typische Anisotropiekonstante ~10% der vierzähligen, hat seine weiche Achse entlang einer <110> Richtungen. Eine zweite zweizählige Komponente mit weicher Achse entlang [100] oder [010] wird wegen seiner kleinen Anisotropiekonstante (1% der vierzähligen) in SQUID Messungen oft übersehen. Elektrisches Schreiben wäre für kommerzielle Anwendungen interessant. Wir demonstrieren strominduziertes Magnetisierungsschalten in einer lateralen (Ga,Mn)As Struktur bei 4 K. Wir lesen den großen Widerstand aus, der durch das geometrische Confinement von Domänenwänden in Verengungen entsteht. Das stromunterstützte Umschalten der Magnetisierung einer kleinen Insel durch ladungsträger-übermittelten Spin-Transfer von den größeren Zuleitungen kann nachgewiesen werden. Eine Moeglichkeit zur nichtzerstörenden Messung des Magnetisierungszustandes eines Halbleiterspeicherelementes ist die Nutzung des Anisotropen Tunnelmagnetowiderstandseffekts (TAMR). Hier wird der Ursprung der großen Verstärkung des Effektes in einer Struktur mit epitaktisch gewachsenener Tunnelbarriere bei niedrigen Temperaturen untersucht und erklärt. Es wird gezeigt, dass eine dünne (Ga,Mn)As Injektorschicht vom metallischen in den isolierenden Zustand übergeht, wenn die Magnetisierungsrichtung in der Schichtebene gedreht wird. Zustände auf der metallischen Seite des MIT können leicht von Zuständen auf der isolierenden Seite am Anstieg der Tunnelleitfähigkeitskennlinie unterschieden werden. Um den Anforderungen von komplexeren Architekturen und Designs gerecht zu werden, wird hier eine Methode eingeführt, um erstmals die magnetische Anisotropie in (Ga,Mn)As lokal zu kontrollieren. Typische (Ga,Mn)As Strukturen habe eine vernachlässigbar kleine Formanisotropie. Die neuartige Methode zur lokalen Einstellung der magnetischen Anisotropie, beruht auf der Mikrostrukturierung und der damit verbundenen anisotropen Relaxation des Kristallgitters. SQUID- und Transportmessungen demonstrieren die uniaxiale magnetische Anisotropie der lithographisch definierten Submikrometer-Streifen (Nanobars), die im gesamten Temperaturbereich von 4 K bis zu Tc die magnetischen Eigenschaften der Strukturen bestimmt. Im letzten Teil der Arbeit nutzen wir die Anisotropiekontrolle zum Design eines nicht-flüchtigen ferromagnetischen Halbleiter-Speicherelementes. Zwei senkrecht zueinander angeordnete, magnetisch uniaxiale Nanobars sind an einer Ecke über eine Verengung elektrisch verbunden. Die relative Orientierung ihrer Magnetisierungsvektoren wird durch ein Magnetfeld eingestellt. Der geschriebene Magnetisierungszustand bleibt bei ausgeschaltetem Feld erhalten und ist durch die Messung des elektrischen Widerstandes der Verengung auslesbar. Feldlinienbilder der verschiedenen magnetischen Zustände in Kombination mit dem AMR Effekt können dieses Verhalten erklären. Das Auslesesignal, also der Widerstandsunterschied zwischen den Zuständen, kann bedeutend verstärkt werden, indem eine Struktur mit teilweise verarmter Verengung verwendet wird. Wie in der TAMR Struktur, ist die Verstärkung auf einen Metall-Isolator-Uebergang beim Drehen der Magnetisierung zurückzuführen. KW - Anisotropie KW - Magnetoelektronik KW - Ferromagnetikum KW - Halbleiter KW - Spintronik KW - "(Ga KW - Mn)As" KW - Anisotropie KW - Bauelemente KW - Datenspeicher KW - Spintronics KW - "(Ga KW - Mn)As" KW - Anisotropy KW - devices KW - memory Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-23370 ER - TY - JOUR A1 - Geis, G. A1 - Geick, R. A1 - Becker, Charles R. A1 - Wagner, V. T1 - Antiferromagnetic resonance in CoO/NiO mixed crystals N2 - We have studied the lowest magnetic excitation of Ni\(_{1-x}\)Co\(_x\)O mixed crystals for 0.94 \(\leq\) x \(\leq\) 1. Together with previous results for 0.02 \(\leq\) x \(\leq\) 0.07 and neutron data for x = 0.14 and x = 0.30, the results are discussed by means of a model, especially the variation of AFMR frequency and preferred spin direction with Co concentration x. Y1 - 1977 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-31239 ER - TY - JOUR A1 - Becker, Charles R. A1 - Lau, Ph. A1 - GEICK, R. A1 - Wagner, V. T1 - Antiferromagnetic Resonance in NiO:Co\(^{2+}\) and NiO:Fe\(^{2+}\) N2 - No abstract available. Y1 - 1975 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-30772 ER - TY - THES A1 - Graus, Martin T1 - Anwendung und Weiterentwicklung der Orbitaltomographie T1 - Application and Advancement of Orbital Tomography N2 - Als Orbitaltomographie wird eine junge Methode innerhalb der Photoelektronenspektrokopie bezeichnet, welche es ermöglicht, Molekülorbitale mit hoher Ortsauflösung abzubilden. Hierfür werden die zu untersuchenden Moleküle durch elektromagnetische Strahlung angeregt und die mittels Photoeffekt emittierten Elektronen hinsichtlich ihres Impulses und ihrer kinetischen Energie charakterisiert. Moderne Photoemissionsexperimente erlauben die simultane Vermessung des gesamten Impulshalbraumes oberhalb der Probe. Die detektierte Intensitätsverteilung stellt dann unter bestimmten Bedingungen das Betragsquadrat eines hemisphärischen Schnittes durch den Fourierraum des spektroskopierten Orbitals dar, wobei der Radius der Hemisphäre von der Energie der anregenden Strahlung abhängt. Bei den in dieser Arbeit untersuchten Systemen handelt es sich um adsorbierte Moleküle, die hochgeordnete Schichten auf kristallinen Edelmetalloberflächen bilden. Im Fall eindomänigen Wachstums liefern die parallel orientierten Moleküle identische Photoemissionssignale. Kommt es hingegen zur Ausbildung von Rotations- und Spiegeldomänen, stellt die gemessene Impulsverteilung eine Superposition der unterschiedlichen Einzelbeiträge dar. Somit lassen sich Rückschlüsse auf die Orientierungen der Moleküle auf den Substraten ziehen. Diese Charakterisierung molekularer Adsorptionsgeometrien wird anhand verschiedener Modellsysteme vorgestellt. Variiert man die Energie der anregenden Strahlung und somit den Radius der hemisphärischen Schnitte durch den Impulsraum, ist es möglich den Fourierraum des untersuchten Molekülorbitals dreidimensional abzubilden. Kombiniert man die gemessenen Intensitäten mit Informationen über die Phase der Wellenfunktion im Impulsraum, die durch zusätzliche Experimente oder rechnerisch gewonnen werden können, lässt sich durch eine Fouriertransformation ein dreidimensionales Bild des Orbitals generieren, wie Schritt für Schritt gezeigt wird. Im Zuge eines Photoemissionsprozesses kann das Molekül in einen angeregten vibronischen Zustand übergehen. Mittels Photoemissionsexperimenten mit hoher Energieauflösung lassen sich Unterschiede zwischen den Impulsverteilungen der schwingenden Moleküle und denen im vibronischen Grundzustand feststellen. Ein Vergleich der Messdaten mit Simulationen kann die Identifikation der angeregten Schwingungsmode ermöglichen, was eine neue Methode darstellt, Erkenntnisse über die Elektron-Phonon-Kopplung in molekularen Materialien zu gewinnen. N2 - Orbital tomography is a relatively young method within the field of photoelectron spectroscopy, which allows for imaging of molecular orbitals with high spatial resolution. After excitation of the specimen by electromagnetic radiation, electrons are emitted via the photoelectric effect and characterised regarding their momenta and kinetic energies by a photoelectron detector system. State-of-the-art photoemission experiments are capable of simultaneous mapping of the full emission hemisphere above the sample. Under certain conditions, measured intensity distributions are then proportional to the square of the absolute value of a hemispherical section through the investigated orbital's Fourier space. The radius of the hemisphere is dependent on the excitation energy. In this study, the systems under investigation constitute adsorbed molecules which form highly ordered layers on surfaces of noble metal crystals. If the growth process leads to a single domain in which all molecules are aligned parallel, the molecules send out identical photoemission signals. If rotational or mirror domains are however formed, the measured momentum distribution is a superposition of the individual contributions. As a consequence, conclusions on the orientation of the molecules on the substrate can be drawn. This characterization of molecular adsorption geometries is presented by means of various modell systems. Variation of the excitation energy associated with a change in the radius of the hemispherical section allows for a three-dimensional imaging of the investigated orbital's Fourier space. A combination of measured intensities with information on the phase of the wave function in momentum space, which can be derived experimentally or numerically, renders a three-dimensional reconstruction of the orbital possible via a Fourier transform, as shown step by step. As part of the photoemission process, the molecule can be transfered into an excited vibronic state. Employing photoemission experiments with high energy resolution, one can detect differences between the momentum distributions of vibrant molecules and those in the vibronic ground state. A comparison of experimental data with simulations can enable identification of the relevant vibronic mode, showcasing a new method to gain information on electron-phonon coupling in molecular materials. KW - ARPES KW - Molekülorbital KW - Photoelektronenspektroskopie KW - Orbitaltomographie KW - Impulsmikroskopie KW - Molekülspektroskopie KW - Molekülspektroskopie Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-163194 ER - TY - THES A1 - Grimm, Manuel T1 - Anwendung und Weiterentwicklung der winkelaufgelösten Photoemission an Molekül-Metall-Grenzflächen: Geometrische Struktur von Bilagenschichten und Kondoeffekt T1 - Application and further development of angle-resolved photoemission on molecule-metal interfaces: Geometric structure of bilayers and kondo effect N2 - Im Rahmen dieser Dissertation wurden organische Dünnschichten und deren Grenzflächen an Metallen mittels Photoemissionsspektroskopie untersucht. Hierbei wurden, unter Einstrahlung von Photonen mit einer Energie von zumeist 20-50 eV Elektronen des Valenzbandes des zu untersuchenden Probensystems ausgelöst, und in Abhängigkeit der kinetischen Energie und des Austrittswinkels bzw. Impulses charakterisiert. Eine wesentliche Aufgabe dieser Arbeit war es, die technische Entwicklung experimenteller Apparaturen des letzten Jahrzehnts dazu zu verwenden, um mit möglichst großer energetischer Auflösung bereits etablierte aber dennoch vielversprechende Systeme erneut zu untersuchen. Im ersten Hauptabschnitt wurden hierzu Einzel- und Doppelschichten bestehend aus Pentacenmolekülen mittels Molekularstrahlepitaxie auf einer Ag(110)-Oberfläche abgeschieden. Eine anschließende Untersuchung der emittierten Photoelektronen mittels Impulsmikroskopie, wodurch man in der Lage ist, die Photoelektronen des gesamten oberen Halbraumes gleichzeitig zu detektieren, ergab eine Verkippung der Moleküle der ersten und zweiten Lage der Doppelschichten. Im Vergleich hierzu liegen die Moleküle der Einzelschicht flach auf dem Substrat auf. Der Übergang von der Einzel- zur Doppelschicht erwirkt demnach eine Verkippung der Moleküle der ersten Lage, welche aufgrund der direkten Wechselwirkung mit dem Substrat nicht zu erwarten war. Im weiteren Verlauf dieses Abschnittes konnten unter Verwendung eines hemisphärischen Analysators mit hoher Energieauflösung weitere Feinheiten des Valenzbandspektrums, wie z.B. ein ungewöhnlicher Kurvenverlauf des Intensitätsmaximums des zweiten besetzten Molekülorbitals der ersten (unteren) Pentacenlage ausgemacht werden. Im zweiten Hauptabschnitt wurde eine energetisch schmale Resonanz, welche in der Literatur mit dem Kondoeffekt in Verbindung gebracht wird, im Valenzbandspektrum zweier unterschiedlicher Metall-Phthalocyaninmoleküle (Nickel- und Kupfer-Phthalocyanin) auf den drei Oberflächen Ag(100), Ag(110) und Ag(111) adsorbiert und auf ihre Temperaturabhängigkeit im Bereich von 20-300 Kelvin untersucht. Hierbei ergab sich neben der Feststellung des Vorhandenseins des Maximums auf allen drei Silber-Oberflächen ein energetischer Versatz dieses Maximums durch Abkühlen der Probe im Falle der Substrate Ag(100) und Ag(110), welcher in der vorliegenden Größenordnung von bis zu 100 meV ungewöhnlich für bisherige bekannte Kondosysteme ist. Auf Ag(111) konnte kein signifikanter Versatz im Rahmen der Messungenauigkeit festgestellt werden. Im weiteren Verlauf wurden auch von diesen Probensystemen Messungen mittels Impulsmikroskopie durchgeführt, welche in den dadurch erhaltenen Impulskarten geringe Anomalien aufwiesen. Insgesamt kann das vorliegende Verhalten dieser Systeme bis zum Abschluss dieser Arbeit nicht endgültig erklärt werden. Die für organische Systeme höchst ungewöhnliche Theorie der Ausbildung eines Kondogitters, in welcher die Wechselwirkung einzelner Störstellen zur Ausbildung eines elektronenartigen Bandes führt, wäre jedoch zunächst in der Lage, ein derartiges Verhalten, wenn auch nicht in dem hier gezeigten Ausmaß, teilweise zu erklären. N2 - In this dissertation organic thin films and their interfaces to metals are investigated by photoemission spectroscopy. Electrons of the valence band of the sample system to be investigated are excited under irradiation of photons with an energy in the order of 20-50 eV, and characterized as a function of the kinetic energy and the exit angle or momentum. An essential task of this work was to use the technical development of state-of-the-art experimental apparatuses of the last decade in order to investigate already established but nevertheless promising systems with the highest possible energetic resolution. In the first main section, single and double layers consisting of pentacene were deposited by molecular beam epitaxy on an Ag(110) surface. A subsequent examination of the emitted photoelectrons by momentum microscopy, which enables the simultaneous measurement of the entire upper half-space, revealed a tilting of the molecules of the first and second layers of the double layers. In comparison, the molecules of the single layer lie flat on the substrate. Therefore, the transition from the single to the double layer causes a tilting of the molecules of the first layer, which was not to be expected due to the direct interaction with the substrate. In the further course of this section, using a hemispherical analyzer with high energy resolution, further small energetic features of the valence band spectrum could be detected, e.g. an unusual shape of the intensity of the second occupied orbital of the first (bottom) pentacene layer. In the second main section, an energetically narrow resonance, which is associated with the Kondo effect in the literature, was investigated in the valence band spectrum of two different metal phthalocyanine molecules (nickel and copper) adsorbed on the three surfaces Ag(100), Ag(110) and Ag(111) for their temperature dependence in the range of 20-300 Kelvin. Besides the determination of the occurrence of the maximum on all three silver surfaces, an energetic shift of this maximum resulted from cooling the sample on the substrates Ag(100) and Ag(110), which in the present order of magnitude of approx. 100 meV is unusual for the previously known Kondo systems. On Ag(111) no significant shift could be found within the uncertainty of the measurement. In the further course, measurements of these sample systems were also carried out using a momentum microscope, which showed minor anomalies in the resulting momentum maps. Overall, the presented behaviour of these systems could not be explained within the frame of this dissertation. However, the theory of the formation of a Kondo lattice, in which the interaction of individual impurities leads to the formation of an electron-like band, which is highly unusual for organic systems, might be able to partially explain such a behaviour, even if not to the extent shown here. KW - Winkelaufgelöste Photoemissionsspektroskopie KW - Molekülphysik KW - Kondo-Effekt KW - Tieftemperaturphänomene KW - Low temperature effects Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-213797 ER - TY - THES A1 - Basse-Lüsebrink, Thomas Christian T1 - Application of 19F MRI for in vivo detection of biological processes T1 - Anwendung der 19F MRT zur in-vivo Detektion von biologischen Prozessen N2 - This thesis focuses on various aspects and techniques of 19F magnetic resonance (MR). The first chapters provide an overview of the basic physical properties, 19F MR and MR sequences related to this work. Chapter 5 focuses on the application of 19F MR to visualize biological processes in vivo using two different animal models. The dissimilar models underlined the wide applicability of 19F MR in preclinical research. A subsection of Chapter 6 shows the application of compressed sensing (CS) to 19F turbo-spin-echo chemical shift imaging (TSE-CSI), which leads to reduced measurement time. CS, however, can only be successfully applied when a sufficient signal-to-noise ratio (SNR) is available. When the SNR is low, so-called spike artifacts occur with the CS algorithm used in the present work. However, it was shown in an additional subsection that these artifacts can be reduced using a CS-based post processing algorithm. Thus, CS might help overcome limitations with time consuming 19F CSI experiments. Chapter 7 deals with a novel technique to quantify the B+1 profile of an MR coil. It was shown that, using a specific application scheme of off resonant pulses, Bloch-Siegert (BS)-based B+1 mapping can be enabled using a Carr Purcell Meiboom Gill (CPMG)-based TSE sequence. A fast acquisition of the data necessary for B+1 mapping was thus enabled. In the future, the application of BS-CPMG-TSE B+1 mapping to improve quantification using 19F MR could therefore be possible. N2 - Diese Arbeit handelt von verschiedenen Aspekten und Techniken der 19F Magnet Resonanz Tomographie (MRT). In den ersten Kapiteln wird auf grundlegenden physikalischen Eigenschaften der MRT, die 19F MRT und MRT Sequenzen eingegangen. Kapitel 5 behandelt die Anwendung von 19F MRT zur in vivo Visualisierung von biologischen Prozessen. Dazu wurden zwei verschiedene Tiermodelle benützt. Diese stark unterschiedlichen Modelle markieren die breite Anwendungsmöglichkeit der 19F MR Bildgebung in der präklinischen Forschung. In einem Unterabschnitt des Kapitels 6 wurde gezeigt, dass Compressed Sensing (CS) zur Beschleunigung von 19F Turbo-Spin-Echo Chemical Shift Imaging (TSE-CSI) Experimenten beitragen kann. Allerdings kann CS nur erfolgreich angewendet werden, wenn ein ausreichendes Signal-Rausch-Verhältnis (SNR) vorhanden ist. Denn ist das nicht der Fall und wird der CS Algorithmus dieser Arbeit verwendet, dann entstehen sogenannte spike Artefakte. In einem weiteren Unterabschnitt wurde aber gezeigt, dass diese Artefakte mit einem CS basierten Algorithmus in der Nachbearbeitung der Daten reduziert werden. Zusammenfassend lässt sich sagen, dass CS, die Beschränkungen durch zeitaufwändigen 19F CSI Experimenten überwinden kann. Kapitel 7 handelt von einer neuartigen Technik um das B+1 Profil einer MR Spule quantitativ auszumessen. Es wurde gezeigt, dass mit einem bestimmten Anwendungsschema von offresonanten Pulsen das Bloch-Siegert (BS)-basiertes B+1 Mapping mit Hilfe einer Carr Purcell Meiboom Gill (CPMG) basierten TSE Sequenz betrieben werden kann. Somit wurde eine schnelle Aufnahme der Daten, die für das B+1 Mapping benötigt werden, erreicht. In der Zukunft könnte das BS-CPMG-TSE B+1 Mapping möglicherweise dazu beitragen, die Quantifizierung mittels 19F MRI zu verbessern. KW - Kernspintomografie KW - Fluor-19 KW - Bloch-Siegert KW - Compressed Sensig KW - 19F-MR KW - Rekonstruktion KW - NMR-Tomographie KW - NMR-Bildgebung Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-77188 ER -