TY - THES A1 - Iff, Oliver T1 - Implementierung und Charakterisierung von Einzelphotonenquellen in zweidimensionalen Übergangsmetall-Dichalkogeniden und deren Kopplung an optische Resonatoren T1 - Implementation and characterization of single photon sources in two-dimensional transition-metal dichalcogenides and their coupling to optical resonators N2 - Schon heute bilden Einzelphotonenquellen einen wichtigen Baustein in der Photonik und Quanteninformation. Der Fokus der Forschung liegt entsprechend auf dem Finden und Charakterisieren dafür geeigneter Materialsysteme. Konkret beschäftigt sich die vorliegende Arbeit vorwiegend mit dem Übergangsmetall-Dichalkogenid (TMDC1 ) Wolframdiselenid und seinen Eigenschaften. Diese Wahl ist durch den direkte Zugang zu Einzelphotonenquellen begründet, die sich in dessen Monolagen ausbilden können. Diese Lichtquellen können über eine Modulation der Verspannung der Monolage gezielt aktiviert werden. Durch die, verglichen mit ihrem Volumen, riesige Kontaktfläche lassen sich Monolagen zudem mit Hilfe des Substrats, auf das sie transferiert wurden, wesentlich beeinflussen. Im Rahmen dieser Arbeit wurden Monolagen von WSe2 in unterschiedlichen Bauteilen wie zirkulare Bragg-Gittern oder vorstrukturierten, metallischen Oberflächen implementiert und die Photolumineszenz des TMDCs untersucht. Diese Arbeit belegt die Möglichkeit, Einzelphotonenquellen basierend aufWSe2 -Monolagen auf verschiedenste Weise modulieren zu können. Dank ihrer zwei- dimensionalen Geometrie lassen sie sich einfach in bestehende Strukturen integrieren oder auch in der Zukunft mit weiteren 2D-Materialien kombinieren. N2 - Single photon sources are an important building block in today’s photonics and quantum information. This is the reason why a big focus lies on the exploration of new, suitable material systems. Specifically, the work in hand mainly discusses the transition metal dichalcogenide (TMDC) tungsten diselenide and its properties. The reason for this is the easy access to single photon sources, which can be found in WSe2 monolayers. These can deterministically be activated by utilizing strain. As the interface between a transferred monolayer and its underlying substrate is huge compared to its volume, the substrate itself always has a big impact on the TMDC. In scope of this work, WSe2 monolayers were transferred on several devices like circular Bragg gratings or structured metal surfaces in order to investigate the optical response of the TMDC. This work therefore proves the concept of modulating single photon sources based on WSe2 monolayers in many different ways. Thanks to their two-dimensional nature, monolayers of TMDCs can easily be integrated in existing devices and combined with other 2D materials in the future. KW - Einzelphotonenemission KW - Photolumineszenz KW - Optik KW - Zweidimensionales Material KW - Schwache Kopplung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-281404 ER - TY - THES A1 - Gernert, Markus Stefan T1 - Lumineszenzverhalten von Kupfer(I)- und Zink(II)-verbindungen mit N-heterozyklischen Carbenen als π-Chromophorliganden T1 - Luminescence characteristics of copper(I) and zinc(II) compounds with N-heterocyclic carbenes as π-chromophore ligands N2 - Zu Beginn dieser Arbeit galten Kupfer(I)-emitter als vielversprechende Alternativen zu den bis dato führenden Iridium(III)-emittern, waren dabei aber nur sehr selten tatsächlich kompetitiv. Die oftmals verwendenten chelatisierenden Diimin- bzw. Phosphanliganden als π-Chromophorligand ermöglichten bei diesen Kupfer(I)-emittern die Nutzung von TADF als Emissionsmechanismus, womit in seltenen Fällen strahlenden Ratenkonstanten von kr > 105 s-1 erreicht wurden. Diese Werte konnten allerdings nicht für den gesamten sichtbaren Spektralbereich erzielt werden, was auf eingeschränkte Modifikationsmöglichkeiten sowie unvollständige Struktur-Eigenschafts-Beziehungen zurückgeführt werden kann. Erklärtes Ziel dieser Arbeit war es folglich, die Modifikationsmöglichkeiten von Kupfer(I)-emittern deutlich zu vergrößern. Hierbei wurde besonderes Augenmerk auf die Verwendung von Carbenen als monodentaten π-Chromophorliganden gelegt. Ausgehend von MeCAAC bzw. verschiedenen CAArCs konnte eine Bandbreite von Kupfer(I)- sowie Zink(II)-verbindungen synthetisiert sowie charakterisiert werden. Die durchgeführten Photolumineszenzstudien zeigen eindrucksvoll die Chromophoreigenschaften der verwendeten Carbene auf, werden doch Quantenausbeuten bis nahezu 1 sowie strahlende Ratenkonstanten von bis zu 9·105 s-1 erreicht. Es gelang somit also, Kupfer(I)-carbenverbindungen als vielversprechende Emitterklasse zu etablieren. In einem zweiten Bereich wurden anschließend erste Versuche unternommen, die gewonnen Erkenntnisse auf das Feld der Zink(II)-carbenverbindungen zu übertragen. Dabei konnten wichtige Erkenntnisse hinsichtlich Struktur und Stabilität Zink(II)-MeCAAC-verbindungen erhalten werden. N2 - At the beginning of this work, copper(I) emitters were regarded as promising alternatives to the hitherto leading iridium(III) emitters, although they were only very rarely truly competitive. The often used chelating diimine or phosphane ligands as π-chromophore ligands enabled the use of TADF as emission mechanism for these copper(I) emitters, thus achieving radiative rate constants of kr > 105 s-1 in rare cases. However, these values could not be obtained for the entire visible spectral range, which can be attributed to limited modification possibilities as well as incomplete structure-property relationships. Consequently, the stated goal of this work was to significantly increase the modification possibilities of copper(I) emitters. In this regard, particular attention was paid to the use of carbenes as monodentate π-chromophore ligands. Starting from MeCAAC or various CAArCs, a range of copper(I) as well as zinc(II) compounds could be synthesized as well as characterized. The photoluminescence studies carried out impressively demonstrate the chromophor properties of the carbenes used, as quantum yields of up to almost 1 and radiative rate constants of up to 9·105 s-1 are achieved. It was thus possible to establish copper(I) carbene compounds as a promising emitter class. In a second area, initial attempts were then made to transfer the knowledge gained to the field of zinc(II) carbene compounds. In the process, important findings were obtained with regard to the structure and stability of zinc(II) meCAAC compounds. KW - Photolumineszenz KW - Kupferverbindungen KW - Zinkverbindungen KW - Heterocyclische Carbene <-N> KW - Lumineszenzverhalten Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-231099 ER - TY - THES A1 - Müller, Kerstin T1 - Einzelmolekül- und Ensemble-Fluoreszenzstudien an funktionalisierten, halbleitenden Kohlenstoffnanoröhren T1 - Single molecule and ensemble fluorescence studies on functionalized, semiconducting carbon nanotubes N2 - Ziel dieser Dissertation war es zu einem besseren Verständnis hinsichtlich folgender Themen beizutragen und Möglichkeiten aufzuzeigen, mit welchen die Voraussetzungen für Anwendungen von einzelnen, funktionalisierten Kohlenstoffnanoröhren, wie u.a. Einzelphotonenquellen, erfüllt werden können. Eine wesentliche Voraussetzung für die Funktionalisierung von einzelnen Kohlenstoffnanoröhren ist zunächst eine Probenpräparation, welche SWNT-Suspensionen mit einem hohen Anteil an vereinzelten SWNTs hoher PL-Intensität bereitstellen kann. Um solche SWNT-Suspensionen herstellen zu können, wurden drei verschiedene Rohmaterialien und Dispergiermittel auf deren Entbündelungseffizienz- und relativer Photolumineszenzquantenausbeute untersucht. Anhand von photolumineszenzspektroskopischen Untersuchungen und Messungen der Extinktion stellte sich heraus, dass in Kombination des unaufbereiteten CVD-Kohlenstoffnanorohrrußes mit dem Copolymer PFO:BPy als Dispergiermittel und einem speziell in dieser Dissertation entwickelten Herstellungsverfahren für die Mikroskopieproben, stabile (6,5)-SWNT-Suspensionen mit einem großen Anteil an einzelnen SWNTs hoher PL-Intensität, hergestellt werden können. Letztere Suspension diente als Ausgangsmaterial für die, in dieser Dissertation neuartige, entwickelte Methodik zur Differenzierung zwischen einzelnen SWNTs und Aggregaten mittels PL- und Ramanmessungen an einem PL-Mikroskopie-Aufbau, welche eine weitere Voraussetzung für Einzelpartikelstudien darstellt. Hierbei wurden im Rahmen einer statistischen Messreihe PL- und Ramanspektren von 150 SWNT-Objekten aufgenommen und hieraus resultierend die Parameter FWHM, Energie des S1-Emissions-Zustands und relative Photolumineszenzquantenausbeute ermittelt. Schließlich konnten die zwischen einer einzelnen SWNT und einem Aggregat charakteristischen Differenzen anhand der Korrelationen zwischen den drei Parametern dargestellt werden. Zudem erfolgte eine statistische Analyse zur Bestimmung der statistischen Signifikanz dieser Korrelationen. Hierbei wurde anhand der nicht-parametrischen Spearman-Korrelationskoeffizienten und der p-Werte gezeigt, dass in Kombination dieser drei Messparameter mit einer hohen Wahrscheinlichkeit zwischen einer einzelnen SWNT und einem Aggregat differenziert werden kann. Demnach konnte eine neuartige, im Vergleich zur Literatur, praktikable Methodik zur Differenzierung zwischen einzelnen SWNTs und Aggregaten, etabliert werden, welche die Voraussetzung für Einzelrohrstudien ist. Der Fokus dieser Dissertation ist die Entschlüsselung der Reaktionsmechanismen der Arylierung und reduktiven Alkylierung von (6,5)-SWNTs im Ensemble und auf Einzelrohrbasis. Durch diese kovalenten Funktionalisierungsverfahren entstehen neue fluoreszierende Defekt-Zustände, deren zeitabhängiges Intensitätsverhalten in der vorliegenden Arbeit näher untersucht wurde. Hinsichtlich der Arylierung von SWNTs mit Diazoniumsalzen postulieren Studien einen zweistufigen Reaktionsmechanismus, welcher durch eine kombinatorische, spektroskopische Gesamtbetrachtung im Rahmen dieser Dissertation bestätigt werden konnte. Auch konnte erstmalig in der Literatur gezeigt werden, dass die Reaktion in hohem Maße reproduzierbar ist. Reproduzierbarkeitsstudien wurden auch im Falle der reduktiven Alkylierung unternommen, wobei erstmalig festgestellt wurde, dass diese Reaktion lediglich im hohen Maße reproduzierbar ist, sofern die Reduktionslösung mindestens 17 Stunden vor Reaktionsstart angesetzt wird. Basierend auf diesem Resultat, wurden reproduzierbare Messreihen zur Untersuchung der Reaktionsbedingungen und des Reaktionsmechanismus unternommen, da diesbezüglich unzureichend Kenntnis in der Literatur vorhanden ist. Zur Klärung des Reaktionsmechanismus, von welchem lediglich Annahmen existieren, wurde zum einen der Einfluss der Laseranregung auf die Reaktion untersucht. Da lediglich für den Falle des Ansetzens der Reduktionslösung unmittelbar vor Messbeginn, wobei die reaktiven SO2- -Radikale erzeugt werden, ein Einfluss der Laseranregung festgestellt werden konnte, nicht jedoch im weiteren Reaktionsverlauf, ist von keiner radikalischen Reaktion im Funktionalisierungsschritt auszugehen. Dies konnte durch den Einsatz von Konstitutionsisomeren des Iodbutans bestätigt werden, wobei das Iodbutanisomer, welches im Fall einer radikalischen Reaktion die höchste Reaktivität zeigen sollte, zu keiner Funktionalisierung der SWNTs führte. Im Gegensatz hierzu, konnte durch das 1-Iodbutan, mit dem primären C-Atom, eine hohe PL-Intensität der defekt-induzierten Zustände E11- und T- verzeichnet werden, was die weitere Annahme einer SN2-Reaktion stützt. Im Rahmen dieser Dissertation konnte zudem erstmalig entdeckt werden, dass unter deren alkalischen, reduktiven Bedingungen, eine Funktionalisierung mit Acetonitril erfolgen kann, was durch die Durchstimmung der PL-Intensität des Defektzustands bei Variation des Volumenanteils von Acetonitril bestätigt werden konnte. Hierbei gilt es jedoch weiter zu analysieren, auf welche Art die Koordination bzw. Funktionalisierung von Acetonitril an den SWNTs erfolgt, was u.a. durch Ramanmessungen untersucht werden könnte. Auch konnten neuartige Kenntnisse bezüglich der Reaktionskinetik basierend auf den Studien dieser Dissertation erhalten werden, wobei festgestellt wurde, dass das Reaktionsprofil mit dem einer komplexen Folgereaktion angenähert werden kann. Zudem konnten neuartige Kenntnisse aus der Thermodynamik, wie die Ermittlung der Aktivierungsenergie der Adsorption von DOC-Molekülen auf der SWNT-Oberfläche, durch die Zugabe des Tensids DOC zum Reaktionsansatz und dem hieraus resultierenden Reaktionsabbruch, erhalten werden. Schließlich fand eine Übertragung der Ergebnisse aus den Ensemblestudien der reduktiven Alkylierung auf Einzelpartikeluntersuchungen statt, wobei letztere erstmalig im Rahmen dieser Arbeit durchgeführt wurden. Aus der statistischen Analyse, welche von Martina Wederhake durchgeführt wurde, resultierte durch Erhöhung des Stoffmengenverhältnisses von 1-Iodbutan zu Kohlenstoff eine inhomogene Steigerung des Funktionalisierungsgrades. Ausblickend gilt es nun zu prüfen, ob die zeitlichen Reaktionsverläufe der photolumineszierenden Zustände, welche aus den Ensemble-Studien erhalten wurden, auf Einzelrohrbasis reproduziert werden können. Es lässt sich demnach festhalten, dass mithilfe der Studien dieser Dissertation ein Probenherstellungsverfahren, welches stabile SWNT-Suspensionen mit einem großen Anteil an einzelnen Kohlenstoffnanoröhren, hoher PL-Intensität ermöglicht, etabliert werden konnte. Zudem wurde eine neuartige, praktikable und statistisch signifikante Methodik zur Differenzierung zwischen einzelnen Kohlenstoffnanoröhren und Aggregaten entwickelt. Schließlich konnten neue, essentielle Informationen bezüglich des Reaktionsmechanismus und den Reaktionsbedingungen der Arylierung und reduktiven Alkylierung von halbleitenden (6,5)-SWNTs erhalten werden. Wie in der Einleitung bereits erwähnt, sind sowohl der Erhalt einer stabilen SWNT-Suspension mit einem großen Anteil an einzelnen Nanoröhren hoher PL-Intensität, die Möglichkeit der Identifizierung einzelner SWNTs, als auch ein ausgiebiges Verständnis der Reaktionsmechanismen der Funktionalisierungsreaktionen, essentielle Voraussetzungen für die Verwirklichung von Einzelphotonenquellen auf Basis einzelner, funktionalisierter Kohlenstoffnanoröhren. Diese können aufgrund derer geeigneter Emissionseigenschaften als vielversprechende Kandidaten für das Ausgangsmaterial von Einzelphotonenquellen in der Quanteninformationstechnologie angesehen werden. N2 - The motivation of the present thesis was to obtain a better understanding considering the following topics and to show possibilities with the aid of which the requirements for the realization of applications based on single functionalized carbon nanotubes, e.g. single-photon-sources, can be fullfilled. For single-particle studies a SWNT suspension with a high amount of individual and bright carbon nanotubes is needed. Therefore different carbon nanotube soots and dispersing agents were used to determine the unbundling efficiency and relative photoluminescence quantum yield of the resulting suspensions. It turned out that by using the homemade CVD soot with the copolymer PFO:BPy as the dispersing agent and by means of a special developed preparation method of the microscope samples, stabilized SWNT suspensions with a huge amount of individualzed SWNTs with a high PL-intensity could be obtained. Consequently based on this thesis a practically new method was developped by using photoluminescence and raman microscopy. As the source material of this study, the mentioned suspension resulting from CVD soot and PFO:BPy was used. In this context pl and raman spectra of 150 SWNT objects were taken and the parameter FWHM, energy of the first exzitonic subband S1 of the pl spectra and the relative photoluminescence quantum yield were obtained. The characteristical trends concerning the optical properties of aggregates and individual carbon nanotubes could be observed by means of the correlations between the three parameters. However, the standard deviations of the results were quite high, for which reason a statistical analysis has been done to proove the statistical significance of the data. Hereby the non-parametric spearman correlation coefficients and the p-values were determined. It turned out that by the combination of this three parameters one could distinguish with a high probability individual SWNT from aggregates which is the requirement for single-particle studies. As mentioned at the beginning of this work the main aim of this thesis was to get a better understanding of the reaction mechanism and conditions of the arylation and reductive alkylation on (6,5)-SWNTs in solution and on single-particle level. As a result of this functionalization reactions new fluorescent defect-states are formed whose time-dependent intensity behaviour is analyzed among this thesis. Concerning the arylation of SWNTs with diazonium salts a two-step radical chain mechanism is assumed which could be confirmed by viewing the reaction in its spectroscopic entirety during this thesis. Finally it turned out that the arylation of swnts as it is done in this work is highly reproducible. Studies on the reproducibility also have been done for the case of the reductive alkylation. It has become clear that it is very important to prepare the alkaline solution of the reducing agent sodium dithionite at least 17 hours before measurement. Based on this result, reproducible measurements were done to anazyle the reaction conditions and mechanism, as the reaction is not well understood yet in literature. To get a better insight into the reaction mechanism of the redutive alkylation the influence of the laser excitation was studied. It turned out that just in case for the reaction run whereby the sodium dithionit solution was prepared immediately before the measurement, a dependence on the pl intensity of the defect state from laser excitation could be oberved. This is explained by the stepe where the SO2- -radicals are generated. As there is no dependency in the further reaction process no radical reactions are present in the reductive alkylation. This observation could be confirmed by the use of iodobutane constitution isomers as they have the contrary reaction reactivities for the radical and the SN2 pathway. It turned out that the primary 1-iodobutane shows the highest reactivity by the presence of an intensive defect state in the pl spectra, whereby no defect state could be generated by means of the tertiary 2-iodo-2-methylpropane. Therefore it is likely that the reductive alkylation runs via the SN2 pathway. Besides by means of this thesis it could be observed for the first time, that under these reductive conditions, acetonitrile is also available to functionalize the SWNTs even in the absence of haloalkanes. This could be confirmed with the tuning of the defect induced pl intensity by a varying ratio of the volumina of acetonitrile. However, the way how acetonitrile functionalizes the SWNTs must be analyzed in further experiments. This could be done by raman measurements. Additionaly new results concerning the reaction's kinetic could be obtained by the studies during this thesis, as the time dependent behaviour of the defect induced pl intensity is similiar to a complexe consecutive reaction and the reaction's rates are proportional to the amount of functionalization agent. To get new information about the thermodynamics of the reaction, DOC was added to abort the reaction. Due to an exchange of the SDS and unreactive molecules of acetonitrle and 1-iodobutane by DOC on the SWNT-surface adsorption isotherms could be observed with the start of the DOC addition and the saturation of the pl intensity of the defect state E11-. Finally the results of the ensemble studies of the reductive alkylation were transferred to the single-particle level to get information about the distribution of the defect centers on the individual SWNT. By means of a statistical analysis which has been done by Martina Wederhake an inhomogeneous distribution of sp3 defect centers on the SWNT surface was obtained as the amount of the functionalization agent was enhanced. For the future, it should be examined if the time-dependent behaviour of the fluorescent states can be reproduced on single carbon nanotoubes. It can thus be concluded that by means of this thesis a procedure which enables stabilized SWNT suspensions with a huge amount of single SWNTs with a high pl-intensity could be established. Besides a new practically and statistical significant method for the differentiation between individual SWNTs and aggregates could be developped. Finally important information concerning the reaction mechanisms and reaction conditions of the arylation and reductive alkylation on semiconducting (6,5)-single wall carbon nanotubes could be obtained. As mentioned at the beginning of the thesis in the introduction a SWNT suspension with a huge amount of single SWNTs with a high pl-intensity, the possiblity to identify individualized SWNTs and a deep understanding of the functionalization reactions are essential requirements for the realization of single photon sources based on functionalized carbon nanotubes. Latter ones are promising candidates for the source material of single-photon sources in quantum information technology due to their suited emission properties. KW - Einwandige Kohlenstoff-Nanoröhre KW - Funktionalisierung KW - Spektroskopie KW - Einzelmolekülmikroskopie KW - Photolumineszenz KW - kovalente Funktionalisierung KW - covalent functionalization KW - reduktive Alkylierung KW - reductive alkylation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-209942 ER - TY - THES A1 - Sorg, Jens Rudolf T1 - Koordinationspolymere auf Antimon- und Bismut-Basis mit aromatischen Stickstoff-Donor Liganden - Einblick in Strukturen und Lumineszenz T1 - Coordinationpolymers based on antimony and bismuth with aromatic nitrogen-donor ligands - insight into structures and luminescence N2 - Im Rahmen dieser Arbeit konnten die Strukturen von 32 neuen Koordinationspolymeren (CPs) und acht neuen Komplexen auf Basis von Antimon- \bzw Bismuthalogeniden und N-Donor Liganden aufgeklärt werden. Davon konnten 26 CPs vollständig mittels diffraktometrischer, spektroskopischer und thermischer Analysetechniken charakterisiert werden. Das Hauptaugenmerk dieser Arbeit lag dabei auf den strukturellen Eigenschaften sowie den Photolumineszenzeigenschaften der antimon- \bzw bismuthaltigen Koordinationspolymere. Für die Synthese der Koordinationsverbindungen wurden die Bis- \bzw Trispyridyle 4,4'-Bipyridin (\textit{4-bipy}), 1,2-Bis(4-pyridyl)ethylen (\textit{4-bpe}), 1,2-Bis(4-pyridyl)ethan (\textit{4-bpa}) und 2,4,6-Tris(4-pyridyl)triazin (\textit{4-tpt}), die aromatischen Nitrile 4-Cyanopyridin (\textit{4-cypy}) und 2,4,6-Tris(4-cyanophenyl)triazin (\textit{4-tcpt}) sowie die Heteroaromaten Pyrazin (\textit{pyz}) und Thiazol (\textit{thz}) zusammen mit SbX$_3$ und BiX$_3$ (X: Cl, Br, I) eingesetzt. Die Reagenzien wurden unter unterschiedlichen Synthesebedingungen miteinander zur Reaktion gebracht, um die Koordination der organische Liganden zu realisieren. Auf diese Weise konnte eine Fülle an Strukturen beobachtet werden, die sich von Komplexen über eindimensionale Stränge und zweidimensionale Schichten bis hin zu dreidimensionalen Netzwerken erstreckt. Als bevorzugte Koordinationsumgebung wurde sowohl für Bi$^{3+}$, als auch für Sb$^{3+}$ verzerrte Oktaeder beobachtet. Für Antimon konnten darüber hinaus quadratisch pyramidale und tetraedrische Koordination mit stereochemisch aktiven freien Elektronenpaaren beobachtet werden, während vergleichbare Bismutverbindungen oktaedrische Koordination aufweisen. Dies verdeutlicht die stärkere Neigung des freien Elektronenpaares von Sb$^{3+}$ über sterische Wechselwirkungen mit den Liganden in Interaktion zu treten, verglichen mit jenem von Bi$^{3+}$. Die Bispyridyl Liganden \textit{4-bipy}, \textit{4-bpe} und \textit{4-bpa} formen mit den Antimon(III)- und Bismut(III)halogeniden die sublimierbaren, doppelsträngigen CPs $^{\ 1}_\infty$[E$_2$X$_6$(\textit{L})$_2$] (E: Sb, Bi; X: Cl, Br, I; L: \textit{4-bipy}, \textit{4-bpe}, \textit{4-bpa}; \textbf{1}-\textbf{6}, \textbf{8}-\textbf{15}) sowie $^{\ 1}_\infty$[SbCl$_3$(\textit{4-bipy})] (\textbf{7}). In den CPs \textbf{1}-\textbf{6}, \textbf{8}-\textbf{15} erfolgt die Verknüpfung der E$^{3+}$-Kationen nicht nur über die organischen Liganden, sondern auch über die Halogenidoliganden. Eine ähnliche Art der Verknüpfung tritt in den CPs $^{\ 3}_\infty[$Bi$_2$Br$_6$(\textit{4-tcpt})] (\textbf{26}) und $^{\ 2}_\infty[$Bi$_2$Br$_6$(\textit{pyz})] (\textbf{32}) auf, während in $^{\ 1}_\infty[$BiX$_3$(\textit{4-cypy})$_2$] (X: Cl, Br; \textbf{16}, \textbf{17}) die Verknüpfung sogar ausschließlich über die Halogenidoliganden erfolgt. Umsetzungen der Halogenide mit \textit{4-tpt} führen zur Ausbildung verschiedener Koordinationspolymere. Während mit den Iodiden sowohl die CPs $^{\ 1}_\infty[$EI$_3$(\textit{4-tpt})] (E: Sb, Bi; \textbf{22}, \textbf{23}), als auch $^{\ 2}_\infty[$E$_4$I$_{12}$(\textit{4-tpt})$_2$] (E: Sb, Bi; \textbf{24}, \textbf{25}) zugänglich sind, reagieren die Chloride und Bromide zu $^{\ 2}_\infty[$EX$_3$(\textit{4-tpt})] (E: Sb , Bi; X: Cl, Br; \textbf{18}-\textbf{21}). Aus dem CP $^{\ 1}_\infty[$SbCl$_3$(\textit{pyz})] (\textbf{29}), das quadratische \{SbCl$_3$N$_2$\}-Pyramiden enthält, kann durch Erhitzen das höher vernetzte $^{\ 3}_\infty[$Sb$_2$Cl$_6$(\textit{pyz})$_3$] (\textbf{30}) mit oktaedrischer Sb$^{3+}$-Koordination in einer Kondensationsreaktion dargestellt werden. Eine verwandte Struktur wurde auch für die iodidhaltige Verbindung $^{\ 3}_\infty[$Sb$_2$Cl$_6$(\textit{pyz})$_3$] (\textbf{31}) beobachtet werden. Die Untersuchung der Lumineszenzeigenschaften der synthetisierten Koordinationspolymere ergab, dass die breitbandigen Anregungsprozesse in den Sb- und Bi-CPs durch metal-to-ligand charge-transfer (MLCT) Prozesse hervorgerufen werden. Für die Emission stellen ligand-to-metal charge-transfer (LMCT) Übergänge von ligandzentrierten Zustände in die elektronischen Grundzustände an den anorganischen Koordinationseinheiten und inter-valence charge-transfer (IVCT) Prozesse in E$^{3+}$-Paaren die bedeutendsten Prozesse dar. Darüber hinaus konnte in einigen CPs aber auch ligandbasierte Fluoreszenz \bzw Phosphoreszenz beobachtet werden. Die Intensität der Lumineszenz ist erheblich von den enthaltenen Halogenidoliganden abhängig (Cl>Br>I), weshalb für iodidhaltige Verbindungen keine Lumineszenz beobachtet werden konnte. Darüber hinaus wurden vier lanthanoidhaltige Koordinationspolymere der Zusammensetzung $\beta$-$^{\ 1}_\infty[$Bi$_{2-x}$Ln$_x$Cl$_6$(\textit{4-bipy})$_2$] (Ln: Ce, Eu, Tb, Eu/Tb; \textbf{41:Ln}) hergestellt. Dadurch konnte die hervorragende Eignung bismutbasierter Koordinationspolymere als Wirtsverbindungen für Ln$^{3+}$-Kationen nachgewiesen werden. In diesen Verbindungen führt die Anregung des Wirtsgitters über einen Energietransfer zu den charakteristischen Eu$^{3+}$- und Tb$^{3+}$-Emissionen. Die Anwesenheit von Ce$^{3+}$ führt hingegen zu einer deutlichen Intensitätssteigerung der Lumineszenz der Wirtsverbindung. Somit sind auf diese Weise effiziente Phosphore mit variablen Lumineszenzfarben zugänglich. Insgesamt konnten im Rahmen dieser Arbeit zahlreiche neue Sb- und Bi-basierte Koordinationsverbindungen mit N-Donor Liganden dargestellt werden und neue Erkenntnisse über ihre strukturellen Eigenschaften und Photolumineszenzeigenschaften erhalten werden. N2 - Within the scope of this thesis the structures of 32 new coordination polymers (CPs) and eight new complexes constructed from antimony- and bismuthhalides could be identified. 26 of these CPs could be completely characterised by diffractometric, spectroscopic and thermal analytical methods. The main goal of this thesis was to investigate the structural properties as well as the photoluminescence properties of antimony- and bismuth-based coordination polymers. The bis- and trispyridyls 4,4'-bipyridine (\textit{4-bipy}), 1,2-bis(4-pyridyl)ethene (\textit{4-bpe}), 1,2-bis(4-pyridyl)ethane (\textit{4-bpa}) and 2,4,6-tris(4-pyridyl)triazine (\textit{4-tpt}), the aromatic nitriles 4-cyano-pyridine (\textit{4-cypy}) and 2,4,6-tris(4-cyanophenyl)triazine (\textit{4-tcpt}) as well as the heterocycles pyrazine (\textit{pyz}) and thiazole (\textit{thz}) were used as organic ligands together with SbX$_3$ and BiX$_3$ for the synthesis of the coordination compounds. Various synthetic routes were investigated to allow the coordination of the organic ligands. Thereby, a variety of structures could be obtained ranging from complexes over one-dimensional strands and two-dimensional layers to three-dimensional networks. An octahedral coordination was observed to be preferred by both Bi$^{3+}$ and Sb$^{3+}$. Square pyramidal and tetrahedral coordination spheres have been discovered for antimony as well illustrating the stronger tendency of the antimony lone-pair for sterical interactions with the ligands, when compared to the bismuth lone pair. The bispyridyl-ligands \textit{4-bipy}, \textit{4-bpe} and \textit{4-bpa} form the double-stranded CPs $^{\ 1}_\infty$[E$_2$X$_6$(\textit{L})$_2$] (E: Sb, Bi; X: Cl, Br, I; L: \textit{4-bipy}, \textit{4-bpe}, \textit{4-bpa}; \textbf{1}-\textbf{6}, \textbf{8}-\textbf{15}) and $^{\ 1}_\infty$[SbCl$_3$(\textit{4-bipy})] (\textbf{7}) with antimony(III)- and bismuth(III)halides. The E$^{3+}$-cations are interconnected by the organic ligands as well as the halogenidoligands in the CPs \textbf{1}-\textbf{6}, \textbf{8}-\textbf{15}. A similar interconnection can be observed in $^{\ 3}_\infty[$Bi$_2$Br$_6$(\textit{4-tcpt})] (\textbf{26}) and $^{\ 2}_\infty[$Bi$_2$Br$_6$(\textit{pyz})] (\textbf{32}), while the E$^{3+}$-cations in $^{\ 1}_\infty[$BiX$_3$(\textit{4-cypy})$_2$] (X: Cl, Br; \textbf{16}, \textbf{17}) are solely interconnected by the halogenidoligands. By reaction of the halides with \textit{4-tpt} different coordination polymers can be obtained. While the iodides form the CPs $^{\ 1}_\infty[$EI$_3$(\textit{4-tpt})] (E: Sb, Bi; \textbf{22}, \textbf{23}) and $^{\ 2}_\infty[$E$_4$I$_{12}$(\textit{4-tpt})$_2$] (E: Sb, Bi; \textbf{24}, \textbf{25}), reactions of the chlorides and bromides lead to $^{\ 2}_\infty[$EX$_3$(\textit{4-tpt})] (E: Sb , Bi; X: Cl, Br; \textbf{18}-\textbf{21}). The coordination polymer $^{\ 1}_\infty[$SbCl$_3$(\textit{pyz})] (\textbf{29}) contains square \{SbCl$_3$N$_2$\}-pyramids and reacts to the three-dimensional coordination polymer $^{\ 3}_\infty[$Sb$_2$Cl$_6$(\textit{pyz})$_3$] (\textbf{30}) in a condensation reaction when heated. \textbf{30} features \textit{fac}-\{SbCl$_3$N$_3$\}-octahedra linked in all three dimensions by the organic ligands. A closely related structure could be discovered for the iodide-containing compound $^{\ 3}_\infty[$Sb$_2$Cl$_6$(\textit{pyz})$_3$] (\textbf{31}). Investigations of the photoluminescence properties of the presented cooridnation polymers showed that broad-banded excitation processes of the Sb- and Bi-CPs are due to metal-to-ligand charge-transfer (MLCT) transistions. Ligand-to-metal charge-transfer (LMCT) from ligand-centred electronic states to the electronic ground-state at the inorganic coordination units and inter-valence charge-transfer transistions in E$^{3+}$-pairs are the most important emission processes. Moreover, ligand-based fluorescence or phosphorescence could be observed in some CPs as well. The luminescence intensity is depending on the nature of the halogenido-ligands significantly (Cl>Br>I). Hence, no lumescence could be observed for compounds containing iodide at all. Additionally, the four lanthanide-containing CPs $\beta$-$^{\ 1}_\infty[$Bi$_{2-x}$Ln$_x$Cl$_6$(\textit{4-bipy})$_2$] (Ln: Ce, Eu, Tb, Eu/Tb; \textbf{41:Ln}) were synthesized in the scope of this thesis, which establish Bi-CPs as remarkable hosts for Ln$^{3+}$-cations. In these compounds the excitation of the bismuth-based host-network leads to the characteristic luminescence of the Eu$^{3+}$- and Tb${3+}$-cations by an energy transfer. However, the presence of Ce$^{3+}$ leads to a significant increase in intensity of the host-luminescence. Hence, efficient phosphors with customizable luminescence-colours can be obtained via this approach. Alltogether various new Sb- and Bi-based coordination compounds featuring N-donor-ligands could be obtained during this work. This allowed for new insights in their structural properties as well as their photoluminescence properties. KW - Photolumineszenz KW - Bismut KW - Antimon KW - Polymerkomplexe KW - Lanthanoide KW - N-Donor Liganden KW - Kristallstrukturen KW - Statistischer Ersatz Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-211074 ER - TY - THES A1 - Lundt, Nils T1 - Strong light-matter coupling with 2D materials T1 - Starke Licht-Materie Kopplung mit 2D Materialien N2 - This publication is dedicated to investigate strong light-matter coupling with excitons in 2D materials. This work starts with an introduction to the fundamentals of excitons in 2D materials, microcavities and strong coupling in chapter 2. The experimental methods used in this work are explained in detail in chapter 3. Chapter 4 covers basic investigations that help to select appropriate materials and cavities for the following experiments. In chapter 5, results on the formation of exciton-polaritons in various materials and cavity designs are presented. Chapter 6 covers studies on the spin-valley properties of exciton-polaritons including effects such as valley polarization, valley coherence and valley-dependent polariton propagation. Finally, the formation of hybrid-polaritons and their condensation are presented in chapter 7. N2 - Diese Veröffentlichung beschäftigt sich mit starker Licht-Materie Kopplung mit Exzitonen in 2D Materialien. Dies Arbeit beginnt mit einer Einführung in Exzitonen in 2D Materialien, in Mikrokavitäten und starke Licht-Materie Kopplung (Kapitel 1). Die verwendeten, experimentellen Methoden werden in Kapitel 3 beschrieben. Kapitel 4 deckt Voruntersuchungen ab, die helfen die richtigen Materialien und Mikrokavitäten für die folgenden Experimente auszuwählen. In Kapitel 5 werden die Ergebnisse zur Erzeugung von Exziton-Polaritonen in verschiednen Materialen und Kavitäten gezeigt. Kapitel 6 beschäftigt sich mit Untersuchungen der Spin-Tal Eigenschaften der Exziton-Polaritonen, inkl. Effekte wie Tal Polarisation und Koherenz. Abschließend wird in Kapitel 7 die Erzeugung von Hybrid-Polaritonen und deren Kondensation dargestellt. KW - Exziton-Polariton KW - Monoschicht KW - Halbleiter KW - Photolumineszenz KW - UV-VIS-Spektroskopie KW - exciton-polariton KW - 2D material KW - strong light matter coupling KW - transition metall dichalcogenide monolayer KW - photoluminescence spectroscopy Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-187335 ER - TY - THES A1 - Wehner, Tobias T1 - Multifunktionale Kompositmaterialien auf Basis lanthanidhaltiger Verbindungen mit lumineszierenden Nanopartikeln und superparamagnetischen Mikropartikeln T1 - Multifunctional composite materials based on lanthanide containing compounds with luminescent nanoparticles and superparamagnetic microparticles N2 - Die vorliegende Arbeit umfasst die Synthese und Charakterisierung 23 neuartiger, multifunktionaler Kompositmaterialien basierend auf lanthanidhaltigen Verbindungen sowie verschiedenen Nano- und Mikropartikeln. Die dargestellten Materialien konnten als Core/Shell-Systeme mit einem nano- bzw. mikropartikelhaltigen Kern und einer lanthanidhaltigen Hülle charakterisiert werden und vereinen aufgrund ihres Kompositcharakters die spezifischen Eigenschaften der Einzelkomponenten wie Lumineszenz, Superparamagnetismus oder Reflexionseigen-schaften miteinander. Zur Synthese multifunktionaler, lumineszierender Materialien wurden zirconylbasierte, lumineszierende Nanopartikel mit Lanthanidchloriden und lanthanidhaltigen MOFs funktionalisiert. Die Kompositsysteme LnCl3@ZrO(FMN) (FMN = Flavinmononukleotid, Ln = Y, Sc, La, Eu, Tb, Ho) ermöglichen eine Modifizierung der Lumineszenzeigenschaf-ten der Materialien abhängig von der Reaktionstemperatur sowie dem verwendeten Selten-Erd-Ion. Durch Variation der Nanopartikelkomponente konnte mittels der Kom-posite LnCl3@ZrO(MFP) (MFP = Methylfluoresceinphosphat) ein zusätzlicher sol-vatochromer Effekt der Systeme eingeführt werden, während das Kompositmaterial YCl3@ZrO(RP) (RP = Resorufinphosphat) eine andere Chromatizität zugänglich macht. Durch Modifizierung von ZrO(FMN)- und ZrO(MFP)-Nanopartikeln mit 3∞[Eu2(BDC)3]· 2DMF·2H2O (BDC2- = Benzol-1,4-dicarboxylat) wurden Kompositmaterialien dargestellt, die zwei Lumineszenzprozesse mit unterschiedlicher Chromatizität und unterschiedli-cher Anregbarkeit miteinander kombinieren und somit eine reversible Schaltbarkeit zwischen beiden Prozessen durch Variation der Anregungswellenlänge ermöglichen. Zur Synthese luminomagnetischer Materialien wurden superparamagnetische Fe3O4/SiO2-Mikropartikel mit einer Vielzahl lanthanidhaltiger MOFs, die sich hinsichtlich ihrer Lumineszenzeigenschaften und ihrer Stabilität gegenüber Luft und Wasser unterscheiden, modifiziert. Als MOFs wurden hierbei 2∞[Ln2Cl6(Bipy)3]·2Bipy (Bipy = 4,4‘-Bipyridin, Ln = Nd, Sm, Eu, Tb, Er), 3∞[Eu(Im)2], 3∞[Ba0.95Eu0.05(Im)2] (Im = Imidazolat) und 3∞[Eu2(BDC)3]·2DMF·2H2O eingesetzt. Die Variation der zur Funktionalisierung verwendeten Komponente oder eine Kombination mehrerer MOFs ermöglicht eine Anpassung der Lumineszenz der Kompositmaterialien innerhalb des kompletten sichtbaren Spektralbereichs sowie im NIR-Bereich. Die dargestellten luminomagnetische Kompositmaterialien mit wasserempfindlichen MOFs können zur Detektion von Wasser in verschiedenen organischen Lösungsmitteln verwendet werden und stellen somit eine mobile und einfach anwendbare Alternative zur Karl-Fischer-Titration mit einer vergleichbaren Sensitivität dar. So eignen sich die Kompositsysteme 2∞[Eu2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 und 2∞[Eu2Cl6(Bipy)3]·2Bipy, 2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 als optische turn-off-Sensoren, während das Kom-posit 3∞[Eu2(BDC)3]·2DMF·2H2O,2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 als ratiometrischer Sensor verwendet werden kann. Als Alternative zu sphärischen Partikeln wurden auch anisotrope, stäbchenförmige Fe3O4/SiO2-Mikropartikel mittels 3∞[Eu2(BDC)3]·2DMF·2H2O modifiziert. Das resul-tierende Kompositmaterial vereint die isotropen Lumineszenzeigenschaften der MOF-Hülle mit der anisotropen Reflexion von sichtbarem Licht der. Durch die Wahl der Anregungswellenlänge und Richtung eines externen Magnetfelds wird eine stufenlose und reversible Schaltbarkeit zwischen isotropen und anisotropen Eigenschaften ermöglicht. Durch mechanochemische Umsetzung der MOF-Edukte [LnCl3(Py)4]·0.5Py (Ln = Eu, Ho) und 4,4‘-Bipyridin konnte eine Vielzahl von literaturbekannten lanthanidhaltigen Komplexen und Koordinationspolymeren mittels einer neuen und zeiteffizienten Syntheseroute dargestellt werden. Hierbei kann die Verknüpfungsdimension der resultierenden Produkte abhängig von verschiedenen Reaktionsparametern, die den Energieeintrags der Kugelmühle beeinflussen, gesteuert werden. N2 - The thesis at hand deals with the synthesis and characterization of 23 novel multi-functional composite materials that are based on lanthanide containing compounds as well as different nano- and microparticles. The synthesized compounds can be described as core/shell systems with a nanoparticle and microparticle containing core, respectively, and a lanthanide containing shell. Due to their composite character, the materials combine the specific properties of their single constituents such as luminescence, superparamagnetism or reflection properties. For the synthesis of multifunctional luminescent materials, zirconyl containing, lumines-cent nanoparticles were modified with lanthanide chlorides as well as lanthanide con-taining MOFs. The composite materials LnCl3@ZrO(FMN) (FMN = flavin mononucleo-tide, Ln = Y, Sc, La, Eu, Tb, Ho) enable a modification of the materials’ luminescence properties in dependence on the reaction temperature and the particular rare earth ion. Variation of the nanoparticle component leads on the one hand to formation of the sys-tem LnCl3@ZrO(MFP) (MFP = methylfluorescein phosphate), which exhibits a strong solvatochromic effect, and on the other hand to the composite YCl3@ZrO(RP) (RP = resorufin phosphate), which makes another chromaticity of the luminescence ac-cessible. The modification of ZrO(FMN) and ZrO(MFP) nanoparticles with 3∞[Eu2(BDC)3]· 2DMF·2H2O (BDC2- = benzene-1,4-dicarboxylate) results in composite materials that combine two luminescence processes with a different chromaticity and a diverse excita-tion range. Therefore, a continuous and reversible switching between both processes can be executed by variation of the excitation wavelength. For the synthesis of luminomagnetic materials, superparamagnetic Fe3O4/SiO2 micro-particles were modified with a variety of lanthanide containing MOFs that differ in terms of their luminescence properties and their water and air stability. For this purpose, the MOFs 2∞[Ln2Cl6(Bipy)3]·2Bipy (Bipy = 4,4’-Bipyridine, Ln = Nd, Sm, Eu, Tb, Er), 3∞[Eu(Im)2], 3∞[Ba0.95Eu0.05(Im)2] (Im- = imidazolate) and 3∞[Eu2(BDC)3]·2DMF·2H2O were employed for microparticle functionalization. By variation of the selected MOF or a combination of two different compounds, the luminescence properties of the composite materials could be adjusted in the whole visible spectral region as well as in the NIR region. The synthesized luminomagnetic composite materials with water sensitive MOFs can be applied for the detection of water in various organic solvents. Therefore, such compo-sites can be used as alternative to the Karl-Fischer titration that is easy applicable, mo-bile and exhibits similar detection limits. The composite materials 2∞[Eu2Cl6(Bipy)3]· 2Bipy@Fe3O4/SiO2 and 2∞[Eu2Cl6(Bipy)3]·2Bipy,2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 can be deployed as optical turn-off sensors, while the composite system 3∞[Eu2(BDC)3]· 2DMF·2H2O,2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 is suitable for a ratiometric determina-tion of the water content. As alternative to spherical particles, anisotropic rod-like Fe3O4/SiO2 microparticles were functionalized with 3∞[Eu2(BDC)3]·2DMF·2H2O. The resulting composite material com-bines the isotropic luminescence of the MOF shell with the anisotropic reflection of visible light of the microparticle component. A continuous and reversible switching between both optical properties is enabled by the variation of the excitation wavelength and the direction of an external magnetic field. The mechanochemical reaction of the MOF precursors [LnCl3(Py)4]·0.5Py (Ln = Eu, Ho) and 4,4’-bipyridine leads to a variety of lanthanide containing complexes and coordina-tion polymers that have already been reported in literature. Thus, a novel and time effi-cient synthesis route could be described for an alternative preparation of these com-pounds. The dimensionality of the resulting substances can be influenced in dependence on different reaction parameters that have an influence on the application of energy by the ball mill. KW - Photolumineszenz KW - Metallorganisches Netzwerk KW - Superparamagnetismus KW - Mikropartikel KW - Nanopartikel KW - Kompositmaterialien KW - Lumineszenzsensor KW - Luminomagnetische Partikel Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-158186 ER - TY - THES A1 - Zottnick, Sven Holger T1 - Lumineszierende Lanthanid-Koordinationsverbindungen auf Basis von Cyano- und Spiroborat Salzen und ionischen Flüssigkeiten T1 - Luminescent lanthanide coordination compounds based on cyano- and spiroborate salts and ionic liquids N2 - Im Rahmen dieser Arbeit konnten, ausgehend von Borat-haltigen Salzen und ionischen Flüssigkeiten (ILs) sowie Lanthanid-haltigen Precursoren, 30 neue Komplexe und Koordinationspolymere dargestellt werden. Dazu wurden vielfältige Synthesestrategien verfolgt und angewendet, unter anderem Salzmetathesen in Lösung, Solvothermalsynthesen und Ionothermalsynthesen. Ein Hauptaugenmerk bei der Synthese der Zielverbindungen lag auf deren Eigenschaften, wobei insbesondere die Photolumineszenzeigenschaften der erhaltenen Koordinationsverbindungen untersucht wurden. Als Borat-haltige Liganden wurden sowohl Cyanoborate als auch Oxoborate hinsichtlich ihrer Eignung zum Aufbau neuer Koordinationspolymere untersucht. Als Cyanoborat-haltige Edukte wurden dabei Säuren und ionische Flüssigkeiten mit Dicyano-, Tricyano- und Tetracyanoborat- Anionen eingesetzt, die durch die unterschiedliche Zahl an Cyanogruppen zu vielfältigen Koordinationsverbindungen führen können. Mittels Ionothermalsynthese konnten die Verbindungen 1∞[Ln(NO3)2{B(CN)4}(H2O)4] (Ln = La, Eu) sowie [EMIm]1∞[LaNO3{B(CN)4}3(H2O)3] dargestellt werden, wobei es zu einer Transformation der ionischen Flüssigkeit [EMIm][B(CN)4] in ein Koordinationspolymer kommt, in dem sowohl Kation als auch Anion der IL beteiligt sind. Dabei ist es bemerkenswerterweise durch die Reaktionstemperatur möglich zu steuern, welches Produkt sich letztlich bildet. Ebenfalls durch Ionothermalsynthese gelang die Synthese von Einkristallen der Verbindung 3∞[La{C2F5B(CN)3}3], durch deren Kenntnis die Verbindungen 3∞[Ln{C2F5B(CN)3}3](Ln = Eu, Ho) als isotype Strukturen identifiziert und hinsichtlich ihrer Lumineszenzeigenschaften charakterisiert werden konnten. Durch Umsetzungen der Lanthanidchloride mit der Säure H[BH2(CN)2] in Solvothermalsynthesen in Pyridin (py) konnten eindimensionale Koordinationspolymere [H(py)2]1∞[LnCl2{BH2(CN)2}2(py)2]·0.5py (Ln = Ce, Pr) erhalten werden. Unter vergleichbaren Synthesebedingungen aber im Lösungsmittel MeCN beobachtet man hingegen die Bildung von Raumnetzen der Zusammensetzung 3∞[Ln2{BH2(CN)2}9]·[Ln(CH3CN)9] (Ln = Ce, Eu, Tb). Die dreidimensionalen Koordinationspolymere 3∞[Ln{BH(CN)3}3] (Ln = Eu, Tb) wurden ebenfalls in MeCN synthetisiert, allerdings ausgehend von der Säure [H3O][BH(CN)3]. Die erwähnten Verbindungen zeigen für die spektroskopisch relevanten Vertreter charakteristische Lumineszenz auf Basis von 5d-4f- respektive 4f-4f-Übergängen, die überwiegend auf der direkten Anregung der jeweiligen Lanthanidionen beruht. Mit dem Bis-salicylatoborat-Anion (= BSB−) gelang ausgehend von Na[BSB] und LnCl3 unter solvothermalen Bedingungen in Pyridin die Synthese der eindimensionalen, strangartigen Koordinationspolymere 1∞[Ln(BSB)3(py)2] (Ln = Y, La – Nd, Sm) und der zweidimensionalen, schichtartigen Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Sm, Eu, Tb – Er). Einblicke über den Mechanismus der Bildung der genannten Verbindungen konnten durch den Komplex [ErCl2(py)4BSB] gewonnen werden, der eine sukzessive Substitution der Chlorid-Liganden nachweist. Die Verbindungen mit dem [BSB]−-Anion zeigen Photolumineszenz, die auf unterschiedliche Prozesse zurückgeführt werden kann. So weist 1∞[Y(BSB)3(py)2] Fluoreszenz auf, die von den [BSB]−-Anionen herrührt, während 1∞[Ln(BSB)3(py)2] (Ln = Ce, Nd, Sm) sowie 2∞[Ln(BSB)3(py)] (Ln = Sm, Tb, Dy) Lumineszenz auf Basis von 5d-4f- und 4f-4f-Übergängen zeigen, die durch einen Antenneneffekt der koordinierenden [BSB]−-Anionen vergleichsweise intensiv beobachtet werden können. Eine Sonderstellung nehmen hier die Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Eu, Ho) ein. Während mit Eu3+ überwiegend direkte Anregung festgestellt werden kann, treten für Ho3+ Reabsorptionsprozesse auf. Durch Kombination unterschiedlicher Gehalte an Eu3+- bzw. Tb3+-Ionen in den eindimensionalen Koordinationspolymeren 1∞[EuxTb1−x(BSB)3(py)2] (x = 0.75, 0.50, 0.25) können zudem Mischfarben der Lumineszenz erzeugt werden. Mit dem Komplex [B2O(C2O4)2(dmf)2] (dmf = Dimethylformamid) und dem Koordinationspolymer 1∞[Tb{o-C6H4(CO2)2}(H2O)6][PHB]2 (PHB− = Phthalatoborat) konnte zudem die Sonderstellung des [BSB]−-Anions deutlich gemacht werden, da es als einziges untersuchtes Spiroborat-Anion vollständig in Zielverbindungen eingebaut werden konnte, während vergleichbare Spiroborat-Anionen wie das [PHB]−-Anion in Gegenwart Lewis-acider Verbindungen hingegen die Abspaltung funktioneller Gruppen zeigten. Insgesamt konnten in dieser Arbeit somit zahlreiche neue, lumineszierende Koordinationspolymere mit Cyano- und Oxoboraten erfolgreich dargestellt werden. N2 - Within the scope of this thesis 30 new complexes and coordination polymers could be synthesized, starting from borate-containing salts and ionic liquids (ILs) as well as lanthanide compounds. Therefore, manifold synthesis strategies were applied, including salt metatheses, solvothermal syntheses and ionothermal syntheses. The main focus within the synthesis of desired products was set on the properties of the compounds, particularly on their photoluminescence behavior. Both cyanoborates and oxoborates were investigated regarding their potential in constructing new coordination polymers. Acids and ionic liquids with dicyano-, tricyano- and tetracyanoborate anions were used, leading to diverse coordination compounds due to their varying number of cyano groups. By applying ionothermal methods, the compounds 1∞[Ln(NO3)2{B(CN)4}(H2O)4] (Ln = La, Eu) and [EMIm]1∞[LaNO3{B(CN)4}3(H2O)3] could be synthesized from the ionic liquid [EMIm][B(CN)4], showing a transformation of the ionic liquid into a coordination polymer incorporating both cation and anion of the IL. Remarkably, it is possible to control, which of the products is formed by changing the reaction temperature. Single crystals of the compound 3∞[La{C2F5B(CN)3}3] could also be synthesized by ionothermal methods. With the knowledge on the crystal structure, it was possible to identify the compounds 3∞[Ln{C2F5B(CN)3}3] (Ln = Eu, Ho) as isotypic structures, thereby allowing further investigations on their properties, including their luminescence features. By reacting lanthanide chlorides with the acid H[BH2(CN)2] in pyridine (py), one-dimensional coordination polymers [H(py)2]1∞[LnCl2{BH2(CN)2}2(py)2]·0.5py (Ln = Ce, Pr) could be obtained. Under similar solvothermal conditions, but in MeCN as solvent, the formation of networks of the constitution 3∞[Ln2{BH2(CN)2}9]·[Ln(CH3CN)9] (Ln = Ce, Eu, Tb) is observed instead. The three-dimensional coordination polymers 3∞[Ln{BH(CN)3}3] (Ln = Eu, Tb) were also synthesized in MeCN, however starting from the acid [H3O][BH(CN)3]. The compounds described show characteristic luminescence for spectroscopically relevant ions, based on 5d- 4f- and 4f-4f-transitions, respectively. Thereby, the observed luminescence is mainly based on a direct excitation of the respective lanthanide ions. With the bis-salicylatoborate-anion (= BSB−), it was possible to synthesize one-dimensional, strand-like coordination polymers 1∞[Ln(BSB)3(py)2] (Ln = Y, La – Nd, Sm) as well as twodimensional, sheet-like structures 2∞[Ln(BSB)3(py)] (Ln = Sm, Eu, Tb – Er), starting from Na[BSB] and LnCl3 under solvothermal conditions in pyridine. The molecular complex [ErCl2(py)4BSB] allowed further insights into the formation of the described compounds, as it proves a gradual substitution of chloride ligands by [BSB]−-anions. The compounds with the [BSB]−-anion show photoluminescence features ascribed to different processes. 1∞[Y(BSB)3(py)2] shows fluorescence originating from the [BSB]−-anion, while 1∞[Ln(BSB)3(py)2] (Ln = Ce, Nd, Sm) and 2∞[Ln(BSB)3(py)] (Ln = Sm, Tb, Dy) show luminescence based on 5d-4f- and 4f-4f-transitions. These are quite intense, as an antenna effect of coordinating [BSB]−-anions can be observed. The compounds 2∞[Ln(BSB)3(py)] (Ln = Eu, Ho) prove as exceptions, as direct excitation is mainly observed for Eu3+, while Ho3+ shows reabsorption processes. By mixing different contents of Eu3+ and Tb3+ in the one-dimensional coordination polymers 1∞[EuxTb1−x(BSB)3(py)2] (x = 0.75, 0.50, 0.25), it is possible to create mixed luminescence colors. With the complex [B2O(C2O4)2(dmf)2] (dmf = dimethylformamide) and the coordination polymer 1∞[Tb{o-C6H4(CO2)2}(H2O)6][PHB]2 (PHB− = phthalatoborate) the exceptional position of the [BSB]−-anions within the class of spiroborates could be revealed, as it proved as only spiroborate anion within this work, that could be fully incorporated in the desired products. This is benficial to a great extent, as similar spiroborate anions like the [PHB]−-anion tend to loose functional groups in the presence of Lewis-acid compounds. Altogether, it was possible to successfully synthesize numerous luminescent coordination polymers with cyano- and oxoborates in this work. KW - Photolumineszenz KW - Lanthanoide KW - Borate KW - Spiroborate KW - Cyanoborate KW - Koordinationsverbindungen KW - Koordinationspolymere KW - MOFs Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-157945 ER - TY - THES A1 - Dannenbauer, Nicole T1 - Koordinationspolymere und -verbindungen mit intrinsischer Lumineszenz auf Basis von Selten-Erd-Chloriden, Thiazol, Thiolaten und Amin-Co-Liganden T1 - Coordination polymers and compounds with intrinsic luminescence based on rare earth chlorides, thiazole, thiolates and amine co-ligands N2 - In dieser Arbeit konnten 69 neue und neuartige Koordinationspolymere sowie Komplexe mit schwefelhaltigen Liganden auf Selten-Erd-Chlorid-Basis synthetisiert und strukturell charak-terisiert werden. Durch die Umsetzung der Chloride mit dem Liganden Thiazol konnten bei Raumtemperatur, abhängig vom Ionenradius und der eingesetzten Menge Thiazol, sowohl Koordinationspolymere wie 1∞[LnCl3(thz)6]·thz (Ln = La, Ce), dimere Komplexe [Ln2Cl6(thz)8]·3(thz) (Ln = La, Ce, Pr, Nd), [Pr2Cl6(thz)8] sowie monomere Komplexe [LnCl3(thz)4]2·thz (Ln = Sm , Eu , Tb, Ho) erhalten werden. Mittels temperaturabhängiger Pulverdiffraktometrie und in-situ Infra-rotspektroskopie sowie DTA/TG-Messungen konnte exemplarisch an 1∞[LaCl3(thz)6]·thz und [Pr2Cl6(thz)8] gezeigt werden, dass stufenweise thermisch bedingt Thiazolmoleküle aus den Strukturen abgegeben werden bis hin zur Rückbildung des eingesetzten LnCl3. Unter der Vo-raussetzung, dass die flüchtige Komponente Thiazol resorbiert wird, ist daher ein Kreispro-zess denkbar. Ferner konnten zusätzlich wasserhaltige Phasen wie der vierkernige Cluster [Pr4Cl10(OH)2(thz)8(H2O)2] erhalten werden. Durch die Zugabe eines geeigneten Linkermoleküls in das Reaktionssystem aus trivalenten Lanthanidchloriden und Thiazol konnten unter solvothermalen Bedingungen eine Vielzahl an Koordinationspolymeren und Komplexen erhalten werden. Als Linker oder als end-on Ligan-den eigneten sich sowohl eine Reihe an ditopischer Pyridylliganden 4,4'-Biypridin (bipy), 1,2-Di-(4-pyridyl)ethen (dpe), trans-1-(2-Pyridyl)-2-(4-pyridyl)ethylen (tppe), 1,2-Di-(4-pyridyl)ethan (dpa), sowie die Diazine Pyrazin (pyz) und Pyrimidin (pym) oder auch Azole wie 1,2,4-Triazol (tzH) und Pyrazol (pzH). Mittels Einkristallstrukturanalyse und pulverdiffrakto-metrischer Methoden konnten die dreidimensionalen Gerüstverbindungen 3∞[LnCl3(dpa)2]·thz (Ln = Ce - Sm, Gd - Lu), die Schichtstrukturen 2∞[Ln2Cl6(bipy)3(thz)2]·thz (Ln = La, Ce), 2∞[LnCl3(tzH)2(thz)]·thz (Ln = Pr, Sm - Gd) und die strangartigen Koordinationspolymere 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Pr, Nd), 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Sm, Eu - Er, Yb), 1∞[Ln2Cl6(dpe)2(thz)4]·dpe (Ln = Ce, Nd), 1∞[LnCl3(dpe)(thz)2]· 0.5 (dpe) 0.5 (thz) (Ln = Sm, Gd - Dy, Er, Yb), 1∞[HoCl3(dpe)(thz)2]·thz, 1∞[La2Cl6(dpa)(thz)6], 1∞[Pr2Cl6(pyz) (thz)6], 1∞[Ln2Cl6(tzH)4(thz)2] (Ln = Pr, Sm, Gd) sowie die Komplexe [LnCl3(tppe)2(thz)2] (Ln = Nd, Tb, Ho, Er), [Ln2Cl6(pyz)(thz)6]·2(thz) (Ln = Tb, Er), [Ln2Cl6(pym)2(thz)4] (Ln = Tb , Er), [LnCl3(pzH)3(thz)2] (Ln = Pr, Gd) charakterisiert werden.   Ferner konnten die erhaltenen Verbindungen weitestgehend auf ihre photolumineszenz-spektroskopischen sowie thermischen Eigenschaften hin untersucht werden. Außerdem konn-ten auch durch direkte Schwefelkoordination an die Ln3+-Zentren eindimensionale Koordina-tionspolymere 1∞[PrCl2(amt)(py)3] (amt- = 3-Amino-5-mercapto-1,2,4-triazolat), [HNEt3]1∞[LnCl2(amt)2] (Ln = Ho, Er) und Komplexe [LnCl2(Mbim)(py)3]·py (Ln = Y, Er; Mbim = 2-Mercaptobenzimdiazolat) generiert werden N2 - This thesis deals with the structural characterization of 69 novel coordination polymers and complexes synthesized with sulfur containing heterocyclic ligands and trivalent rare earth chlorides. Depending on the ionic radii of the used lanthanide chloride and the amount of the ligand thiazole coordination polymers as 1∞[LnCl3(thz)6]·thz (Ln = La, Ce), dimeric compounds [Ln2Cl6(thz)8]·3(thz) (Ln = La, Ce, Pr, Nd), [Pr2Cl6(thz)8] and monomeric complexes [LnCl3(thz)4]2·thz (Ln = Sm, Eu , Tb, Ho) were derived at room temperature. Using tempera-ture-dependent powder diffraction methods, in-situ IR-spectroscopy and DTA/TG measure-ments it was demonstrated that there is a stepwise, thermal induced release of thiazole molecules out of the structures to back-formation of crystalline lanthanide chloride in the cases of the coordination polymer 1∞[LaCl3(thz)6]·thz and the dimer [Pr2Cl6(thz)8]. This could be a cyclic process requiring the elusive ligand thiazole to be reabsorbed. Furthermore, hy-drous phases were also obtained like the tetranuclear cluster [Pr4Cl10(OH)2(thz)8(H2O)2]. It was possible to generate a series of various coordination polymers and complexes under solvothermal conditions adding suitable linker molecules into the reaction system of lantha-nide chloride and thiazole. Suitable linkers or end-on ligands are a range of ditopic pyridyl ligands like 4,4'-biypridine (bipy), 1,2-di-(4-pyridyl)ethene (dpe), trans-1-(2-pyridyl)-2-(4-pyridyl)ethylene (tppe), 1,2-di-(4-pyridyl)ethane (dpa), diazine as pyrazine (pyz) and pyrimi-dine (pym) as well as azole like 1,2,4-triazole (tzH) and pyrazole (pzH). By single-X-ray struc-ture determination and powder diffraction it was possible to characterize three dimensional networks 3∞[LnCl3(dpa)2]·thz (Ln = Ce - Sm, Gd - Lu), layer structures 2∞[Ln2Cl6(bipy)3(thz)2]·thz (Ln = La, Ce), 2∞[LnCl3(tzH)2(thz)]·thz (Ln = Pr, Sm - Gd) and strand like coordination polymers 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Pr, Nd), 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Sm, Eu - Er, Yb), 1∞[Ln2Cl6(dpe)2(thz)4]·dpe (Ln = Ce, Nd), 1∞[LnCl3(dpe)(thz)2]·0.5 (dpe) 0.5 (thz) (Ln = Sm, Gd - Dy, Er, Yb), 1∞[HoCl3(dpe)(thz)2]·thz, 1∞[La2Cl6(dpa)(thz)6], 1∞[Pr2Cl6(pyz) (thz)6], 1∞[Ln2Cl6(tzH)4(thz)2] (Ln = Pr, Sm, Gd) as well as the complexes [LnCl3(tppe)2(thz)2] (Ln = Nd, Tb, Ho, Er), [Ln2Cl6(pyz)(thz)6]·2(thz) (Ln = Tb, Er), [Ln2Cl6(pym)2(thz)4] (Ln = Tb , Er), [LnCl3(pyr)3(thz)2] (Ln = Pr, Gd). Furthermore, nearly all of the generated structures were investigated with regards to their photoluminescent and thermal properties.   Moreover, one dimensional coordination polymers 1∞[PrCl2(amt)(py)3] (amt- = 3-amino-5-mercapto-1,2,4-triazolate), [HNEt3]1∞[LnCl2(amt)2] (Ln = Ho, Er) and complexes [LnCl2(Mbim)(py)3]·py (Ln = Y, Er; Mbim = 2-mercaptobenzimdiazolate) were obtained by direct coordination of sulfur at Ln3+-centers. KW - Lanthanoide KW - Polymerkomplexe KW - Photolumineszenz KW - Thiolate KW - Thiazole KW - Selten-Erd-Chloride KW - Koordinationspolymere KW - Lumineszenz KW - Thiazol KW - rare earth chlorides KW - coordination polymers KW - luminescence KW - thiazole Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136218 ER - TY - THES A1 - Topczak, Anna Katharina T1 - Mechanismen des exzitonischen Transports und deren Dynamik in molekularen Dünnschichten für die organische Photovoltaik T1 - Mechanisms of the exciton transport and its dynamics in molecular thin films for organic photovoltaic applications N2 - Der Fokus dieser Arbeit liegt in der Untersuchung des exzitonischen Transports, sowie der Dynamik exzitonischer Zustände in organischen Halbleitern. Als fundamentale Fragestellung werden die inhärenten, materialspezifischen Parameter untersucht, welche Einfluss auf die Exzitonen-Diffusionslänge besitzen. Sowohl der Einfluss der strukturellen Ordnung als auch die fundamentalen exzitonischen Transporteigenschaften in molekularen Schichten werden anhand der archetypischen, morphologisch unterschiedlichen organischen Halbleiter Diindenoperylen (DIP), sowie dessen Derivaten, α-6T und C60 studiert. Die resultierende Filmbeschaffenheit wird mittels Röntgendiffraktometrie (XRD) und Rasterkraftmikroskopie (AFM) analysiert, welche Informationen über die Morphologie, die strukturelle Ordnung und die Mikrostruktur der jeweiligen molekularen Schichten auf verschiedenen Längenskalen liefern. Um Informationen über die Exzitonen-Diffusion und die damit einhergehende Exzitonen- Diffusionslänge LD zu erhalten, wurde die Methode des Photolumineszenz (PL)-Quenchings gewählt. Um umfassende Informationen zur Exzitonen-Bewegung in molekularen Dünnschichten zu erhalten, wurde mit Hilfe der Femtosekunden-Transienten-Absorptionsspektroskopie (TAS) und der zeitkorrelierten Einzelphotonenzählung (TCSPC) die Dynamik angeregter Energiezustände und deren jeweiliger Lebensdauer untersucht. Beide Messverfahren gewähren Einblicke in den zeitabhängigen Exzitonen-Transport und ermöglichen eine Bestimmung des Ursprungs möglicher Zerfallskanäle. Die zentralen Ergebnisse dieser Arbeit zeigen zum einen eine Korrelation zwischen LD und der strukturellen Ordnung der Schichtmorphologie, zum anderen weist die temperaturunabhängige Exzitonen-Bewegung in hochgeordneten polykristallinen DIP-Filmen auf die Möglichkeit der Existenz eines kohärenten Exzitonen-Transports bei tiefen Temperaturen unterhalb von 80 K hin. Zeitaufgelöste spektroskopische Untersuchungen lassen zudem auf ein breites Absorptionsband höherer angeregter Zustände schließen und weisen eine höhere Exzitonen- Zustandsdichte in polykristallinen DIP-Schichten im Vergleich zu ungeordneten Filmen auf. N2 - The objective of this work is the examination of the excitonic transport and its dynamics in organic semiconductors. A fundamental question dealt with in this thesis was related to inherent transport mechanisms, which govern the exciton diffusion length LD. To pursue this question, the excitonic transport in organic semiconductor thin films was examined in particular with regard to the influence of the structural coherence on LD as well as to the fundamental excitonic transport mechanisms. The resulting film structure of the samples is analyzed by means of X-ray diffraction (XRD) and atomic force microscopy (AFM), which yield to information on the morphology, the structural order and the microstructure of the molecular films on various length scales. PL-quenching investigations were performed to determine the exciton transport properties in different archetypical organic semiconductors represented by thin films of Diindenoperylene (DIP) and its derivatives, C60 and α-6T. To receive a comprehensive picture of exciton motion in molecular thin films, the exciton dynamics were investigated by femtosecond transient absorption spectroscopy (TAS) and time correlated single photon spectroscopy (TCSPC). Both measurement techniques gain insights into the time dependent exciton transport as well as help to assign the origin of the occurring decay-channels. The main results of this work reveal a correlation of LD with the structural order of the film morphology. In addition, a temperature independent excitonic motion in polycrystalline films of DIP at low temperatures < 80 K hints at the existence of a coherent exciton transport. Furthermore, time dependent spectroscopic investigations indicate a broad absorption band formed by higher excited states which exhibits a higher excitonic density of states in crystalline DIP-layers compared to films with a lower degree of structural order or amorphous texture. KW - Organische Solarzelle KW - Exzitonen Transport KW - Exzitonenbeweglichkeit KW - Exzitonen Diffusionslänge KW - Exzitonen Dynamik KW - Photolumineszenz Quenching KW - Diindenoperylen KW - C60 KW - Transiente Absorptionsspektroskopie KW - Exziton KW - Organische Halbleiter KW - Photolumineszenz Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-132280 ER - TY - THES A1 - Schömig, Herbert Richard T1 - Nanooptik an breitbandlückigen Halbleiter-Nanostrukturen für die Spintronik und Optoelektronik T1 - Nanooptics on wide-bandgap semiconductor nanostructures for spintronics and optoelectronics N2 - Die vorliegende Arbeit behandelt drei Themen aus der Forschung an nanostrukturierten Halbleitern im Umfeld der Spintronik und Optoelektronik. 1) Einzelne semimagnetische Quantenpunkte Mn-dotierte, und damit semimagnetische Halbleiter zeichnen sich durch eine sp-d-Austauschkopplung zwischen den freien Ladungsträgerspins und den Mn-Spins aus. Für ein optisch injiziertes Exziton bedeutet dies eine Austauschenergie, die sich proportional zur Mn-Magnetisierung im Exzitonvolumen verhält. Lokalisiert man das Exziton in einem Quantenpunkt, so kann man es als Sonde für die Magnetisierung in der Nanoumgebung gebrauchen. Bedingung hierfür ist die spektroskopische Selektion einzelner Quantenpunkte. Die Selektion einzelner CdSe/ZnMnSe-Quantenpunkte konnte realisiert werden durch die lithographische Präparation einer lichtundurchlässigen Metallmaske auf der Probenoberfläche, versehen mit nanoskaligen Aperturen. Die Photolumineszenz(PL)-Emission an diesen Aperturen zeigt individuelle PL-Linien entsprechend einzelner Quantenpunkte. Mittels Magneto-PL-Spektroskopie gelingt es das magnetische Moment einzelner Quantenpunkte von wenigen 10 Bohrmagneton sowie die thermische Fluktuation dieses Moments aufzuklären. Sowohl die Temperatur- als auch die Magnetfeldabhängigkeit der Exziton-Mn-Kopplung werden im Rahmen eines modifizierten Brillouinmodells konsistent beschrieben. 2) Ferromagnet-DMS-Hybride Eine lokale Beeinflussung von Spins im Halbleiter wird möglich durch die Präparation von ferromagnetischen Strukturen auf der Halbleiteroberfläche. Die magnetischen Streufelder, welche von nanostrukturierten Ferromagneten (FM) erzeugt werden, können auf mesoskopischer Längenskala eine Verbiegung der Spinbänder in einem Quantenfilm bewirken. Dies gilt insbesondere für einen semimagnetischen (DMS-)Quantenfilm vom Typ ZnCdMnSe/ZnSe, wie er im vorliegenden Fall Verwendung fand. Aufgrund der Verstärkerfunktion der Mn-Spins liegen hier nämlich riesige effektive g-Faktoren vor, welche im Magnetfeld große Spinaufspaltungen produzieren. Wie magnetostatische Rechnungen für Drahtstrukturen aus ferromagnetischem Dysprosium (Dy) offenlegen, sind bei senkrechter Magnetisierung Streufelder in der Größenordung von 0.1 bis 1 T in der Quantenfilmebene darstellbar. Magneto-PL-Messungen mit hoher Ortsauflösung demonstrieren tatsächlich einen Einfluß der nanostrukturierten Ferromagnete auf die exzitonischen Spinzustände im Quantenfilm und erlauben zudem einen Rückschluß auf die magnetische Charakteristik der FM-Nanostrukturen. 3) Einzelne Lokalisationszentren in InGaN/GaN-Quantenfilmen Die Lokalisation der Ladungsträger in nm-skaligen Materieinseln hat einen erheblichen Einfluss auf die optischen Eigenschaften eines InGaN-Quantenfilmes. Eine detaillierte Aufklärung dieses Effektes erfordert den reproduzierbaren, spektroskopischen Zugang zu einzelnen dieser Lokalisationszentren. Diese Bedingung wurde hier mit der Aufbringung einer Nanoaperturmaske auf der Halbleiteroberfläche erfüllt. PL-Spektren, gemessen an solchen Nanoaperturen bei einer Temperatur von 4 K, weisen tatsächlich einzelne, spektral scharfe Emissionlinien mit Halbwertsbreiten bis hinab zu 0.8 meV auf. Eine solche Einzellinie entspricht dabei der PL-Emission aus in einem einzelnen Lokalisationszentrum, welche an dieser Stelle erstmalig nachgewiesen werden konnte. In den folgenden Experimenten zeigte sich interessanterweise, dass diese Einzellinien gänzlich andere Abhängigkeiten an den Tag legen als das inhomogene PL-Signal eines großen Ensembles von Zentren. Dies ermöglichte eine fundierte Beurteilung bislang kontrovers diskutierter Mechanismen, welche für die PL-Charakteristik von InGaN-Quantenfilmen relevant sind. Als bestimmende Faktoren erwiesen sich das interne Piezofeld, der Bandfülleffekt und die Bildung von Multiexzitonen. N2 - This work treats three topics from the research on nanostructured semiconductors in the field of spintronics and optoelectronics. 1) Single semimagnetic quantum dots Semiconductors doped with Mn, so-called diluted magnetic semiconductors, exhibit an intense sp-d exchange interaction between free carrier spins and localized Mn spins. Due to this coupling an exciton, optically injected into the DMS semiconductor, acquires an exchange energy proportional to the Mn magnetization within the exciton volume. If the exciton localizes in a quantum dot it can be employed as a probe monitoring the magnetization in the nanoenvironment. However, this requires the spectroscopic selection of single quantum dots. In this work single CdSe/ZnMnSe quantum dots could be addressed with the help of an opaque metal mask on top of the semiconductor with nanoapertures prepared by electron lithography. The PL emission from such nanoapertures shows individual PL lines corresponding to single quantum dots. By means of magneto-PL-spectroscopy the magnetic moment of single quantum dots of only some tens of Bohrmagnetons is addressed, including its thermal fluctuations. The temperature as well as magnetic field dependence of the exciton-Mn coupling is consistently described in the frame of a modified Brillouin model. 2) Ferromagnet-DMS-Hybrids A local manipulation of spins in a semiconductor can be realized by a preparation of ferromagnetic structures on the surface of a semiconductor. Magnetic fringe fields, emerging from nanostructured ferromagnets (FM) are capable of bending the spin bands of a buried quantum well on a mesoscopic length scale. This is especially valid for a semimagnetic quantum well like the ZnCdMnSe/ZnSe heterostructure used in the following experiments. Due to the drastic enhancement of the exciton g factor by the coupling to the Mn spins, huge spin splittings become possible. Magnetostatic calculations performed for ferromagnetic dysprosium (Dy) wire structures show, that fringe fields in the range of 0.1 to 1 T can be achieved in a perpendicular magnetization configuration. Magneto-PL measurements with a high spatial resolution actually demonstrate an influence of nanostructured ferromagnets on the excitonic spin bands in the quantum well and even provide some information about the magnetic characteristics of the FM nanoelements. 3) Single localization centers in a InGaN/GaN quantum well The localization of charge carriers in nm-sized islands has a strong influence on the optical properties of InGaN/GaN quantum wells. A detailed analysis of these effects require a reproduceable, spectroscopic access to single localization centers. This prerequisite has been fulfilled by depositing a mask with nanoapertures on the semiconductor surface. PL spectra measured on these nanoapertures at a temperature of 4 K reveal individual, spectrally narrow emission lines with a halfwidth down to 0.8 meV. Such a single PL line can be attributed to the emission from a single localization center. The optical access to single centers has been demonstrated here for the first time. As the following experiments showed, there is a profound difference between the behavior of such single PL lines and the inhomogenous PL signal from a large ensemble of centers. This gives a clear picture of the impact of some mechanisms relevant for the PL characteristics of InGaN quantum films, that have been the subject of a controversial debate. The most influential factors are the internal piezo electric field, the bandfilling effect and the formation of multiexcitons. KW - Cadmiumselenid KW - Zinkselenid KW - Manganselenide KW - Semimagnetischer Halbleiter KW - Quantenpunkt KW - Halbleiteroberfläche KW - Ferromagnetische Schicht KW - Nanostruktur KW - Spin KW - Indiumnitrid KW - Galliumnitrid KW - Ferromagnete KW - Photolumineszenz KW - Quantum dots KW - semimagnetic semiconductors Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-126558 N1 - Dieses Dokument wurde aus Datenschutzgründen - ohne inhaltliche Änderungen - erneut veröffentlicht. Die ursprüngliche Veröffentlichung war am: 22.10.2005 ER -