TY - THES A1 - Maier, Matthias T1 - Inorganic and Inorganic-Organic Hybrid Polymers Containing BN Units in the Main Chain T1 - Anorganische und anorganisch-organische hybrid Polymere mit BN Einheiten in der Hauptkette N2 - π-Conjugated organic polymers have attracted tremendous attention in the last decades, and the interest in these materials is mainly driven by their applicability in next-generation electronic and optoelectronic devices (OLEDs, OFETs, photovoltaics). The partial or complete replacement of carbon atoms by main group elements in conjugated polymers can significantly change the characteristics and applications of these macromolecules. In this work, a class of inorganic polymers comprising a backbone of exclusively boron and nitrogen atoms (poly(iminoborane)s, PIBs) and their monodisperse oligomers is described. In addition, novel inorganic–organic hybrid polymers containing BN units in their polymer backbone were synthesized and characterized. In chapter 2.1, the development of catalytic B–N coupling routes for the controlled synthesis of macromolecular materials is described. While the reaction of an N-silyl-B-chloro-aminoborane with the electrophilic reagent trimethylsilyl triflate led to effective B–N coupling, the reaction with a silver(I) salt resulted in an intramolecular Cl/Me exchange between the boron and silicon centers. In chapter 2.2-2.4, the study of oligo- and poly(iminoborane)s is discussed. Monodisperse and cyclolinear oligo(iminoborane)s based on diazaborolidines with up to 7 boron and 8 nitrogen atoms were synthesized by successively extending the B-N main chain. However, the use of benzodiazaborolines only led to limited BN catenation. Furthermore, the redistribution processes resulting from the reaction of longer oligomers with non-stoichiometric amounts of (di)halogenated boranes is reported. In chapter 2.5-2.6, the synthesis of 1,2,5-azadiborolanes as building blocks for the synthesis of poly(iminoborane)s and inorganic-organic hybrid polymers is described. While the attempt to apply an azadiborolane with sterically demanding groups on the boron-bridging ethylene unit for the construction of PIB was unfeasible, it was successfully incorporated in inorganic-organic hybrid polymers. Photophysical studies indicated π-conjugation along the polymer chain. A first attempt to synthesize PIBs based on azadiborolanes with unsubstituted ethylene units showed promising results. In chapter 2.7-2.8, a comprehensive study of poly(arylene iminoborane)s, which are BN analogs of poly(arylene vinylene)s is described, and the properties of four polymers as well as twelve monodisperse oligomers were investigated. Photophysical investigations of the monomers, dimers and polymers showed a systematic bathochromic shift of the absorption maximum with increasing chain length and thiophene content. Based on TD-DFT calculations of the model oligomers, the lowest-energy absorption band could be assigned to HOMO to LUMO transitions with π-π* character. The oligo- and poly(arylene iminoborane)s showed only very weak to no emission in solution but they were emissive in the solid state. For four oligomers the aggregation induced emission (AIE) in a THF/water mixture was investigated and DLS studies confirmed the formation of nanoaggregates. In chapter 2.9, oligo- and polymerizations of sulfur-containing building blocks and subsequent pH-triggered degradation of the products is described. While a sulfilimine-containing oligomer could not be isolated, the sulfone-, sulfoximine-, and sulfoxide-containing molecular oligomers and polymers could be successfully synthesized by B=N or B–O bond formation reactions. The sulfur-containing building blocks were successfully released under acidic or basic conditions, which was confirmed by NMR spectroscopy and mass spectrometry. N2 - π-Konjugierte organische Polymere haben in den letzten Jahrzehnten immer größere Aufmerksamkeit erhalten. Das Interesse an diesen Materialien wird hauptsächlich durch ihre Anwendbarkeit in elektronischen und optoelektronischen Geräten der nächsten Generation (OLEDs, OFETs, Photovoltaik) angetrieben. Der teilweise oder vollständige Ersatz von Kohlenstoffatomen durch andere Hauptgruppenelemente in konjugierten Polymeren kann die Eigenschaften und Anwendungen dieser Makromoleküle erheblich verändern. In dieser Arbeit wird eine Klasse anorganischer Polymere mit einer Hauptkette aus ausschließlich Bor- und Stickstoffatomen (Poly(iminoboran)en, PIBs) und deren monodisperse Oligomere beschrieben. Darüber hinaus wurden neuartige anorganisch-organische Hybridpolymere, die BN-Einheiten in ihrem Polymerrückgrat enthalten, synthetisiert und charakterisiert. In Kapitel 2.1 wird die Entwicklung von katalytischen B-N-Kupplungsmethoden für die kontrollierte Synthese von makromolekularen Materialien beschrieben. Während die Reaktion eines N-Silyl-B-Chlor-Aminoborans mit dem elektrophilen Reagenz Trimethylsilyltriflat zu einer effektiven B-N-Kupplung führte, führte die Reaktion mit einem Silber(I)-Salz zu einem intramolekularen Cl/Me-Austausch zwischen den Bor- und Siliziumzentren. In den Kapiteln 2.2-2.4 wird die Untersuchung von Oligo- und Poly(iminoboran)en behandelt. Durch die sukzessive Verlängerung der BN-Hauptkette wurden monodisperse und zyklolineare Oligo(iminoboran)e, basierend auf Diazaborolidinen, mit bis zu 7 Bor- und 8 Stickstoffatomen synthetisiert. Die Verwendung von Benzodiazaborolinen führte allerdings nur zu einer begrenzten BN-Bindungsknüpfung. Darüber hinaus wurde über Umverteilungsprozesse berichtet, die bei der Umsetzung von längeren Oligomeren mit nicht stöchiometrischen Mengen von (di)halogenierten Boranen resultieren. In den Kapiteln 2.5-2.6 wird die Synthese von 1,2,5-Azadiborolanen als Bausteine für die Synthese von Poly(iminoboran)en und anorganisch-organischen Hybridpolymeren beschrieben. Während der Versuch, ein Azadiborolan mit sterisch anspruchsvollen Gruppen an der borverbrückenden Ethyleneinheit für den Aufbau von PIBs einzusetzen nicht zum Erfolg führte, wurde diese Einheit jedoch erfolgreich in anorganisch-organische Hybridpolymere eingebaut. Photophysikalische Untersuchungen deuteten auf eine π-Konjugation entlang der Polymerkette hin. Ein erster Versuch, PIBs auf der Basis von Azadiborolanen mit unsubstituierten Ethyleneinheiten zu synthetisieren, zeigte vielversprechende Ergebnisse. In den Kapiteln 2.7-2.8 wird die umfassende Studie von Poly(aryleniminoboran)en, die die BN-Analoga von Poly(arylenvinylen)en darstellen, beschrieben und die Eigenschaften von vier Polymeren und zwölf monodispersen Oligomeren untersucht. Photophysikalische Untersuchungen der Monomere, Dimere und Polymere zeigten eine systematische bathochrome Verschiebung des Absorptionsmaximums mit zunehmender Kettenlänge und Thiophengehalt. Auf der Grundlage von TD-DFT-Berechnungen der Modelloligomere konnte die niederenergetischste Absorptionsbande, HOMO-LUMO-Anregungen mit π-π* Charakter zugeordnet werden. Die Oligo- und Poly(aryleniminoboran)e zeigten nur sehr schwache oder keine Emission in Lösung, emittieren aber im festen Zustand. Für vier Oligomere wurde die aggregationsinduzierte Emission (AIE) in einem THF/Wasser-Gemisch untersucht und DLS-Studien bestätigten die Bildung von Nanoaggregaten. In Kapitel 2.9 werden Oligo- und Polymerisationen von schwefelhaltigen Bausteinen und die anschließende pH-gesteuerte Degradierung beschrieben. Während ein Sulfilimin-haltiges Oligomer nicht isoliert werden konnte, konnten die Sulfon-, Sulfoximin- und Sulfoxid-haltigen molekularen Oligomere und Polymere erfolgreich durch B=N oder B O Bindungsbildung synthetisiert werden. Die schwefelhaltigen Bausteine konnten unter sauren oder basischen Bedingungen erfolgreich freigesetzt werden, was durch NMR-Spektroskopie und Massenspektrometrie bestätigt wurde. KW - Anorganische Polymere KW - Konjugierte Polymere KW - Polyarylenvinylene KW - Polyiminoboranes KW - Silicon-Boron Exchange KW - Silizium-Bor Austausch KW - Bor-Stickstoff Bindung KW - boron-nitrogen bond Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-351536 ER - TY - JOUR A1 - Tumir, Lidija-Marija A1 - Pavlović Saftić, Dijana A1 - Crnolatac, Ivo A1 - Ban, Željka A1 - Maslać, Matea A1 - Griesbeck, Stefanie A1 - Marder, Todd B. A1 - Piantanida, Ivo T1 - The nature of the (oligo/hetero)arene linker connecting two triarylborane cations controls fluorimetric and circular dichroism sensing of various ds-DNAs and ds-RNAs JF - Molecules N2 - A series of tetracationic bis-triarylborane dyes, differing in the aromatic linker connecting two dicationic triarylborane moieties, showed very high submicromolar affinities toward ds-DNA and ds-RNA. The linker strongly influenced the emissive properties of triarylborane cations and controlled the fluorimetric response of dyes. The fluorene-analog shows the most selective fluorescence response between AT-DNA, GC-DNA, and AU-RNA, the pyrene-analog’s emission is non-selectively enhanced by all DNA/RNA, and the dithienyl-diketopyrrolopyrrole analog’s emission is strongly quenched upon DNA/RNA binding. The emission properties of the biphenyl-analog were not applicable, but the compound showed specific induced circular dichroism (ICD) signals only for AT-sequence-containing ds-DNAs, whereas the pyrene-analog ICD signals were specific for AT-DNA with respect to GC-DNA, and also recognized AU-RNA by giving a different ICD pattern from that observed upon interaction with AT-DNA. The fluorene- and dithienyl-diketopyrrolopyrrole analogs were ICD-signal silent. Thus, fine-tuning of the aromatic linker properties connecting two triarylborane dications can be used for the dual sensing (fluorimetric and CD) of various ds-DNA/RNA secondary structures, depending on the steric properties of the DNA/RNA grooves. KW - triarylborane KW - fluorescent probe KW - circular dichroism KW - DNA recognition KW - RNA recognition Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-319322 SN - 1420-3049 VL - 28 IS - 11 ER - TY - THES A1 - Weber, Manuel T1 - Synthese, Charakterisierung und Eigenschaften neuartiger carboranyl-substituierter NHC-Liganden und Anwendung in der Metallkomplex-Chemie T1 - Synthesis, characterisation and properties of novel carboranyl-substituted NHC ligands and application in metal complex chemistry N2 - Im Fokus der Dissertation stand die Synthese von Vorstufen (Imidazoliumsalze) für NHC-Liganden sowie die Umsetzung dieser Verbindungen zu N-heterocyclischen Carbenen unter Verwendung des Carba-closo-dodecaborat-Anions. Hierbei wurde der Cluster über die Position B12 oder B7 an das Stickstoffatome des Imidazols gebunden. Zur Synthese wurden unterschiedliche Routen ausgehend von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(12-PhI-closo-1-CB_{11}H_{11}\) sowie den entsprechenden 7-Isomeren untersucht und miteinander verglichen. Die isomerenreinen Synthesen wurden hinsichtlich ihrer Vor- und Nachteile untersucht und so optimiert. Es wurden sowohl unsymmetrische Imidazoliumsalze mit dem Carba-closo-dodecaborat-Anion auf der einen Seite und Alkyl- oder Arylreste (Butyl, Methyl, Phenyl, p-Methoxyphenyl, p-Fluorphenyl-, Vinyl-, Benzyl- und Mesitylsubstituenten) als auch die symmetrische Variante mit zwei Carboranylcluster synthetisiert. Besonders hervorzuheben ist hierbei, dass die Synthese des Bis(1,3-Carboran-12-yl)imidazolatanions in einer Buchwald-Hartwig-Kreuzkupplungsreaktion durch Umsetzung der Reagenzien \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}]\) durch 1 zu 1 Umsetzung miteinander reagiert haben. In den meisten bisher literaturbekannten und im Rahmen der Doktorarbeit untersuchten Buchwald-Hartwig-Kreuzkupplungsreaktionen sind 4-14 Äquivalente des Amins notwendig. Darüberhinaus erfordert das Amin häufig eine Aktivierung durch Umsetzung zu Lithiumorganylen. Dies war bei der Umsetzung von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) mit \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}] \) nicht notwendig und zeigt den starken elektronenschiebenden Effekt des Clusters auf. Die unsymmetrischen Imidazoliumsalze konnten durch Umsetzung mit n-Butyllithium zu C2-NHC-Derivate umgesetzt werden. Bei der Umsetzung des Bis(1,3-Carboran-12-yl)imidazolatanions bildete sich zunächst ein Gemisch aus dem C2- und C5-Isomer, des Weiteren ist anteilig auch die Deprotonierung am Clusterkohlenstoffatom aufgetreten. N2 - The dissertation focused on the synthesis of precursors (imidazolium salts) for NHC ligands and the conversion of these compounds to N-heterocyclic carbenes using the carba-closo-dodecaborate anion. Here, the cluster was attached to the nitrogen atom of the imidazole via the B12 or B7 position. For synthesis, different routes starting from \(Cs[12-I-closo-1-CB_{11}H_{11}]\) and \(12-PhI-closo-1-CB_{11}H_{11}\) as well as the corresponding 7-isomers were investigated and compared. The isomerically pure syntheses were investigated with respect to their advantages and disadvantages and thus optimised. Both asymmetric imidazolium salts with the carba-closo-dodecaborate anion on one side and alkyl or aryl residues (butyl, methyl, phenyl, p-methoxyphenyl, p-fluorophenyl, vinyl, benzyl and mesityl substituents) and the symmetric variant with two carboranyl clusters were synthesised. Of particular note here is that the synthesis of the bis(1,3-carboran-12-yl)imidazolate anion was achieved in a Buchwald-Hartwig cross-coupling reaction by reacting the reagents \(Cs[12-I-closo-1-CB_{11}H_{11}]\) and \(Cs[12-imidazolyl-closo-1-CB_{11}H_{11}]\) by 1 to 1 reaction. In most of the Buchwald-Hartwig cross-coupling reactions known so far in the literature and investigated in the doctoral thesis, 4-14 equivalents of the amine are required. Furthermore, the amine often requires activation by conversion to lithium organyls. This was not necessary in the reaction of \(Cs[12-I-closo-1-CB_{11}H_{11}]\) with \(Cs[12-imidazolyl-closo-1-CB_{11}H_{11})\), demonstrating the strong electron-pushing effect of the cluster. The unsymmetrical imidazolium salts could be converted to C2-NHC derivatives by reaction with n-butyllithium. During the reaction of the bis(1,3-carboran-12-yl)imidazolate anion, a mixture of the C2 and C5 isomer was initially formed, and furthermore, deprotonation also occurred proportionally at the cluster carbon atom. KW - NHC KW - N-Heterocyclische Carbene KW - Carboranylsubstituierte NHC KW - NHC-Gold(I)-Komplexe KW - NHC-Selenkomplexe KW - Imidazolatsalze KW - Imidazoliumsalze Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-258143 ER - TY - THES A1 - Okorn, Alexander T1 - Synthese und Reaktivität von PAH-substituierten Diborenen und Dihydroanthracendiyl-verbrückten Diborverbindungen T1 - Synthesis and Reactivity of PAH-substituted Diborenes and Dihydroanthracendiyl-bridged Diboroncompounds N2 - Die vorliegende Arbeit beschäftig sich mit der Synthese und Reaktivität von Phosphan-stabilisierten Diborenen, die auf Grund ihres Substitutionsmusters über ein erhöhtes Reaktivitätsvermögen verfügen. Der erste Teil dieser Arbeit beschreibt die Synthese von polycyclischen aromatischen Kohlenwasserstoff (PAH)-substituierten, Trimethylphosphan-stabilisierten Diborenen. Im zweiten Abschnitt dieser Arbeit wird die Synthese von Diborenen beschrieben, welche in einer Dihydroanthracendiyl-verbrückten Ringstruktur eingebunden sind. N2 - The work deals with the synthesis and reactivity of phosphine-stabilised diborenes with increased reactivity due to their substitution pattern. The first part describes the synthesis of polycyclic aromatic hydrocarbon (PAH)-substituted, trimethylphosphine-stabilised diborenes.The second part of this work describes the synthesis of strained diborenes, which are incorporated into a dihydroanthracenediyl-bridged ring structure. KW - Diborene Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-348368 ER - TY - THES A1 - Häfner, Alena T1 - Reaktivität eines \(ortho\)-phenylenverbrückten Diborans und Darstellung von gespannten C\(_2\)B\(_2\)-Ringsystemen T1 - Reactivity of an \(ortho\)-phenylenbridged diborane and synthesis of strained C\(_2\)B\(_2\) ring systems N2 - Die Dissertation befasst sich mit der Reaktivität von 1,2-Bis(dichlorboryl)benzol. Im ersten Kapitel wird auf die Problematik bei dessen Synthese eingegangen. Der zweite Teil der Arbeit befasst sich mit der Bildung von entsprechenden Boran-Addukten mit verschiedenen Lewis-Basen. Das dritte Kapitel beschreibt die Synthese eines neuartigen, vollständig ungesättigten 1,2-Diboretdiradikals, welches durch die schrittweise Reduktion des 1,2-[(CAAC)BCl2]2-Benzols erhalten wurde. Darüber hinaus konnte bei dieser schrittweisen Reduktion ebenfalls das einfache Borylradikal, das nicht-cyclische Diradikal und das dianionische gespannte C2B2-Ringsystem erhalten werden. Anfängliche Reaktivitätsstudien zum 1,2-Diboretdiradikal zeigen zudem, dass die B-B-Bindung durch Umsetzung mit Kohlenstoffmonoxid gespalten und so ein Bisborylen dargestellt werden kann. Im vierten Kapitel konnte das 1,2-Bis(dichlorboryl)benzol durch Transmetallierungsreaktionen zu verschiedenen, sich in ihren Eigenschaften stark unterscheidenden, Verbindungen umgesetzt werden. So konnte das fluoreszierende ortho-phenylenverbrückte Bis-9-Borafluoren erhalten werden, aus welchem durch Wärmezufuhr das ebenfalls fluoreszierendes diboraanthracenartige Umlagerungsprodukt gewonnen werden konnte. Beide Verbindungen wurden auf ihre photophysikalischen und elektrochemischen Eigenschaften untersucht. Weiterhin konnten polycyclische Boracyclen mit C10B2-Gerüst erhalten werden, bei welchen instantan die selektive Bildung von zwei chiralen Zentren über eine Vielzahl an B-C-Bindungsbrüchen und -knüpfungen beobachtet wurde. Zuletzt konnte ein thermisch empfindliches, potentiell explosives Azid-verbrücktes Azidoboran dargestellt werden, bei welchem eine Staudinger-artige Reaktivität beobachtet werden konnte. N2 - The dissertation deals with the reactivity of 1,2-bis(dichloroboryl)benzene. The first chapter deals with the problems involved in its synthesis. The second part of the thesis deals with the formation of corresponding borane adducts with various Lewis bases. The third chapter describes the synthesis of a novel, fully unsaturated 1,2-diboretdiradical, which was obtained by the stepwise reduction of 1,2-[(CAAC)BCl2]2-benzene. In addition, the simple boryl radical, the non-cyclic diradical and the dianionic strained C2B2 ring system were also obtained in this stepwise reduction. Initial reactivity studies on the 1,2-diboretdiradical also show that the B-B bond can be cleaved by reaction with carbon monoxide to give a bisborylene. In the fourth chapter, 1,2-bis(dichloroboryl)benzene was reacted by transmetallation reactions to from various compounds with very different properties. Thus, the fluorescent ortho-phenylene-bridged bis-9-borafluorene was obtained, from which the likewise fluorescent diboraanthracene-like rearrangement product could be obtained by applying heat. Both compounds were investigated for their photophysical and electrochemical properties. Furthermore, polycyclic boracycles with a C10B2 scaffold were obtained, in which the selective formation of two chiral centers via a multitude of B-C bond breaks and linkages was observed instantaneously. Finally, a thermally sensitive, potentially explosive azide-bridged azidoborane was obtained for which Staudinger-like reactivity was observed. KW - Biradikal KW - Borylierung KW - Diboret KW - Borylradikale KW - CnB2-Heterocyclen KW - Biradikale Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-348020 ER - TY - THES A1 - Rumpel, Matthias T1 - Development of Components for Solid-State Batteries and their Characterization T1 - Entwicklung von Komponenten für Festkörperbatterien und deren Charakterisierung N2 - This Ph.D. thesis has addressed several main issues in current ASSB research within four studies. Ceramic ASSBs are meant to enable the implementation of Li-metal anodes and high voltage cathode materials, which would increase energy density, power density, life time as well as safety aspects in comparison with commercially available liquid electrolyte LiBs. In this thesis, several scientific questions arising on the cathode side of ASSBs have been focused on. With respect to the target system of a ternary composite bulk cathode consisting of ceramic active material, ceramic SSE and an electrically conductive component, studies about the thermal stabilities of these components and their impact on the electrochemical performance have been conducted. Particulate bulk cathode composites have to fulfil electrochemical, chemical, mechanical and structural requirements in order to compete with commercial LiBs. Particularly, the production process requires high-temperature sintering to obtain firmly bonded contacts in order to maximize the electrochemically active area, charge transfer and ionic conduction. However, interdiffusion, intermixing and decomposition of the initial components during sintering result in low-performing ASSBs so far. These side reactions during high-temperature treatment have been investigated in order to gain a better understanding of these mechanisms and to enable a better controlling of the manufacturing process as well as to simplify the choice of material combinations. The first two parts of this thesis deal with the thermal stability of the ceramic SSE LATP in combination with various active materials and with the validation of a probable improvement of the sintering process due to liquid phase sintering of LATP by adding Li3PO4. In the third and fourth parts, the impact of interdiffusion, intermixing and decomposition on the electrochemical performance of TF-SSBs based on the active material LMO and the ceramic SSE Ga-LLZO has been investigated. N2 - Diese Dissertation befasst sich in vier Studien mit mehreren Hauptthemen der aktuellen Festkörperbatterieforschung (engl.: all solid-state battery, ASSB). Keramische Festkörperbatterien sollen den Einsatz von Li-Metallanoden und Hochvoltkathodenmaterialien ermöglichen, was die Energiedichte, Leistungsdichte, Lebensdauer sowie Sicherheitsaspekte im Vergleich zu kommerziell erhältlichen Lithiumionenbatterien mit flüssigen Elektrolyten erhöhen würde. In dieser Arbeit wurden mehrere wissenschaftliche Fragestellungen untersucht, die sich auf der Kathodenseite von ASSBs ergeben. Im Hinblick auf das Zielsystem einer ternären Kompositkathode, bestehend aus keramischem Aktivmaterial, keramischem Festkörperelektrolyt und einer elektrisch leitfähigen Komponente, wurden Untersuchungen über die thermischen Stabilitäten dieser Komponenten und deren Einfluss auf die elektrochemische Leistung durchgeführt. Partikuläre Kathodenkomposite müssen elektrochemische, chemische, mechanische und strukturelle Anforderungen erfüllen, um mit kommerziellen Lithiumionenbatterien konkurrieren zu können. Insbesondere erfordert der Produktionsprozess ein Hochtemperatursintern, um eine stoffschlüssige Anbindung zu erhalten, damit die elektrochemisch aktive Fläche, der Ladungstransfer und die Ionenleitung maximiert werden können. Allerdings führen Interdiffusion, Vermischung und Zersetzung der Ausgangskomponenten während des Sinterns bisher zu ASSBs mit geringer Leistung. Diese Nebenreaktionen während der Hochtemperaturbehandlung wurden untersucht, um ein besseres Verständnis dieser Mechanismen zu erlangen und eine bessere Steuerung des Herstellungsprozesses sowie eine einfachere Auswahl von Materialkombinationen zu ermöglichen. Die ersten beiden Teile dieser Arbeit befassen sich mit der thermischen Stabilität des Festkörperelektrolyten LATP in Kombination mit verschiedenen Aktivmaterialien und mit der Validierung einer möglichen Verbesserung des Sinterprozesses durch Flüssigphasensinterung von LATP durch Zugabe von Li3PO4. Im dritten und vierten Teil wurde der Einfluss von Interdiffusion, Durchmischung und Zersetzung auf die elektrochemische Leistung von Dünnschicht-Festkörperbatterien basierend auf dem Aktivmaterial LMO und dem keramischen Festkörperelektrolyten Ga-LLZO untersucht. KW - Elektrochemie KW - all solid-state battery KW - solid-state electrolyte KW - lithium-ion battery KW - electrochemistry KW - Festkörperakkumulator KW - Lithium-Ionen-Akkumulator KW - Festelektrolyt KW - Festkörperbatterie KW - Lithium-Ionen Batterie KW - Festkörperelektrolyt Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-347154 ER - TY - THES A1 - Föhrenbacher, Steffen Albert T1 - Tris(pentafluorethyl)difluorphosphoran als \(Lewis\)-saure Komponente von Frustrierten \(Lewis\)-Paaren und als Fluorid-Akzeptor in der Übergangsmetallchemie T1 - Tris(pentafluoroethyl)difluorophosphorane as \(Lewis\) acidic component of Frustrated \(Lewis\) Pairs and as fluoride acceptor in transition metal chemistry N2 - Im Rahmen dieser Arbeit wurde die Reaktivität des Phosphorans (C2F5)3PF2 gegenüber Lewis-Basen (N-heterozyklische Carbene und Phosphane) und gegenüber verschiedenen Übergangsmetall-Fluoridokomplexen untersucht. Im ersten Teil werden die Lewis-Säure/Base-Addukte zwischen (C2F5)3PF2 und verschiedenen N-heterozyklischen Carbenen (NHCs) beschrieben. Der Fokus des zweiten Teils der Arbeit liegt auf der Darstellung kationischer Komplexe ausgehend von neutralen d-Block-Metallfluoriden, welche durch Fluorid-Transfer auf das Lewis-acide (C2F5)3PF2 erfolgt. Hierbei wurden Komplexe verschiedener Übergangsmetalle (Ti, Ni, Cu) verwendet, wodurch der Fluorid-Transfer auf das Phosphoran quer über die 3d-Reihe untersucht wurde. Im letzten Kapitel dieser Arbeit wurden die Synthese und die Anwendung von Kationen des Typs [(NHC)Cu]+ eingehender untersucht. Dazu wurde zunächst die Synthese der Ausgangsverbindungen [(NHC)Cu(F)] modifiziert. Anschließend wurden diese Fluorido-Komplexe auf deren Reaktivität gegenüber (C2F5)3PF2 untersucht. Nachfolgend wurden die Reaktivität von [(Dipp2Im)Cu(C6Me6)]FAP in Ligandenaustauschreaktionen bzw. die Synthese von Komplexen [(Dipp2Im)Cu(LB)]FAP (LB = Lewis-Base) eingehender untersucht. N2 - In the course of this work, the reactivity of the phosphorane (C2F5)3PF2 towards Lewis bases (N-heterocyclic carbenes and phosphines) and various transition-metal fluorido complexes was investigated. In the first part, Lewis acid/base adducts of (C2F5)3PF2 and several N-heterocyclic carbenes (NHCs) are described. The focus of the second part of the work is on the synthesis of cationic complexes starting from neutral d-block metal fluorides, which takes place via fluoride transfer to the Lewis acidic (C2F5)3PF2. Complexes of several transition metals (Ti, Ni, Cu) were applied, whereby the fluoride transfer to the phosphorane was investigated across the 3d row. In the last part of this work the synthesis and application of cations of the type [(NHC)Cu]+ were examined in more detail. First, the synthesis of the starting materials [(NHC)Cu(F)] was modified. Subsequently the reactivity of these fluorido complexes towards (C2F5)3PF2 was investigated. The reactivity of [(Dipp2Im)Cu(C6Me6)]FAP in ligand exchange reactions and the synthesis of complexes [(Dipp2Im)Cu(LB)]FAP (LB = Lewis base) was subsequently studied in more detail. KW - Phosphorane KW - Übergangsmetallkomplexe KW - Addukt KW - Kupfer KW - N-heterozyklische Carbene KW - Frustrierte Lewis-Paare KW - Schwach koordinierende Anionen KW - Fluor(perfluoralkyl)phosphorane KW - N-Heterocyclic Carbenes KW - Frustrated Lewis Pairs KW - Fluoro(perfluoroalkyl)phosphoranes KW - Weakly Coordinating Anions Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-251602 ER - TY - THES A1 - Gärtner, Annalena T1 - Synthese und Reaktivität niedervalenter Borverbindungen T1 - Synthesis and reactivity of low-valent boron compounds N2 - Die Dissertation befasst sich mit der Synthese und Reaktivität verschiedener niedervalenter Borverbindungen. In dem ersten Kapitel der Arbeit wurde das CAAC-stabilisierte Cyano(hydro)borylanion auf seine Bor- sowie Stickstoff-zentrierte Nucleophilie hin untersucht. Das ambidente Reaktionsverhalten der Verbindung konnte gegenüber verschiedenen Kohlenstoffelektrophilen sowie Monohalogenboranen nachgewiesen werden. Der zweite Teil der Arbeit befasst sich mit der Aktivierung, Fixierung und Verkettung von Distickstoff durch Borylene. Es gelang den Mechanismus experimentell sowie quantenchemisch aufzuklären. Das Folgeprodukt der Protonierung, welches ein Bisborylhydrazindiradikal darstellt, wurde weitergehend auf seine Reaktivität als Reduktionsmittel untersucht und konnte selektiv einfach sowie zweifach oxidiert werden. Das dritte Kapitel beschreibt die Synthese eines neuartigen, vollständig ungesättigten 1,2-Diboretdiradikals, welches durch die schrittweise Reduktion des 2,3-[(CAAC)BBr2]2-Naphthalins erhalten wurde. Anfängliche Reaktivitätsstudien zu dem 1,2-Diboretdiradikal zeigen zudem, dass die Verbindung als Bor-Bor-Mehrfachbindung gegenüber einem Azid reagiert, jedoch durch die Umsetzung mit Kohlenstoffmonoxid auch zu einem Bisborylen gespalten werden kann. N2 - The dissertation deals with the synthesis and reactivity of various low-valent boron compounds. The first chapter of the thesis discusses the boron- and nitrogen-centred nucleophilicity of the CAAC-stabilised cyano(hydro)borylanion. The ambivalent reaction behaviour of the compound was demonstrated by reacting it with various carbon electrophiles as well as monohalogen boranes. The second part of the work deals with the activation, fixation and reductive coupling of dinitrogen by borylenes. The mechanism was elucidated experimentally and quantum-chemically. The protonation product, a bisboryl hydrazine diradical, was further investigated for its reactivity as a reducing agent and could be selectively oxidized. The third chapter describes the synthesis of a novel, fully unsaturated 1,2-diborete biradicaloid obtained by the stepwise reduction of 2,3-[(CAAC)BBr2]2 naphthalene. Initial reactivity studies on the 1,2-diborete biradicaloid also show that the compound reacts either as a boron-boron multiple bond towards azides, but can also be cleaved to a bisborylene by reaction with carbon monoxide. KW - Borylene KW - Stickstofffixierung KW - Borylierung KW - Borylanion KW - Diboret KW - Borylen KW - Niedervalentes Bor KW - Niedervalente Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-292771 ER - TY - JOUR A1 - Košćak, Marta A1 - Pehar, Isabela A1 - Božinović, Ksenija A1 - Kole, Goutam Kumar A1 - Sobočanec, Sandra A1 - Podgorski, Iva I. A1 - Pinterić, Marija A1 - Müller-Buschbaum, Klaus A1 - Majhen, Dragomira A1 - Piantanida, Ivo A1 - Marder, Todd B. T1 - Para-N-methylpyridinium pyrenes: impact of positive charge on ds-DNA/RNA and protein recognition, photo-induced bioactivity, and intracellular localisation JF - Pharmaceutics N2 - The 2- and 2,7- substituted para-N-methylpyridinium pyrene cations show high-affinity intercalation into ds-DNAs, whereas their non-methylated analogues interacted with ds-DNA/RNA only in the protonated form (at pH 5), but not at physiological conditions (pH 7). The fluorescence from non-methylated analogues was strongly dependent on the protonation of the pyridines; consequently, they act as fluorescence ratiometric probes for simultaneous detection of both ds-DNA and BSA at pH 5, relying on the ratio between intensities at 420 nm (BSA specific) and 520 nm (DNA specific), whereby exclusively ds-DNA sensing could be switched-off by adjustment to pH 7. Only methylated, permanently charged pyrenes show photoinduced cleavage of circular DNA, attributed to pyrene-mediated irradiation-induced production of singlet oxygen. Consequently, the moderate toxicity of these cations against human cell lines is strongly increased upon irradiation. Detailed studies revealed increased total ROS production in cells treated by the compounds studied, accompanied by cell swelling and augmentation of cellular complexity. The most photo-active 2-para-N-methylpyridinium pyrene showed significant localization at mitochondria, its photo-bioactivity likely due to mitochondrial DNA damage. Other derivatives were mostly non-selectively distributed between various cytoplasmic organelles, thus being less photoactive. KW - N-methylpyridinium pyrene KW - DNA sensing KW - protein sensing KW - singlet oxygen KW - photodynamic therapy KW - fluorescence KW - theranostics Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-297247 SN - 1999-4923 VL - 14 IS - 11 ER - TY - JOUR A1 - Tanini, Damiano A1 - Pecchi, Tommaso A1 - Ignat’ev, Nikolai V. A1 - Capperucci, Antonella T1 - Ionic liquids-assisted ring opening of three-membered heterocycles with thio- and seleno-silanes JF - Catalysts N2 - Ring opening reactions of strained heterocycles (epoxides, aziridines, thiiranes) by silyl chalcogenides, such as thiosilanes and selenosilanes, can be efficiently performed in a variety of ionic liquids, which can behave as reaction media and in some cases also as catalysts. This protocol enables an alternative access to β-functionalized sulfides and selenides under mild conditions. KW - ring opening reactions KW - ionic liquids KW - silyl sulfides KW - silyl selenides KW - thiolysis KW - selenolysis Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-290350 SN - 2073-4344 VL - 12 IS - 10 ER -