TY - THES A1 - Zusan, Andreas T1 - The Effect of Morphology on the Photocurrent Generation in Organic Solar Cells T1 - Der Einfluss der Morphologie auf die Generierung von Photostrom in organischen Solarzellen N2 - Organic solar cells have great potential to become a low-cost and clean alternative to conventional photovoltaic technologies based on the inorganic bulk material silicon. As a highly promising concept in the field of organic photovoltaics, bulk heterojunction (BHJ) solar cells consist of a mixture of an electron donating and an electron withdrawing component. Their degree of intermixing crucially affects the generation of photocurrent. In this work, the effect of an altered blend morphology on polaron pair dissociation, charge carrier transport, and nongeminate recombination is analyzed by the charge extraction techniques time delayed collection field (TDCF) and open circuit corrected transient charge extraction (OTRACE). Different comparative studies cover a broad range of material systems, including polymer and small-molecule donors in combination with different fullerene acceptors. The field dependence of polaron pair dissociation is analyzed in blends based on the polymer pBTTT-C16, allowing a systematic tuning of the blend morphology by varying the acceptor type and fraction. The effect of both excess photon energy and intercalated phases are minor compared to the influence of excess fullerene, which reduces the field dependence of photogeneration. The study demonstrates that the presence of neat fullerene domains is the major driving force for efficient polaron pair dissociation that is linked to the delocalization of charge carriers. Furthermore, the influence of the processing additive diiodooctane (DIO) is analyzed using the photovoltaic blends PBDTTT-C:PC71BM and PTB7:PC71BM. The study reveals amulti-tiered alteration of the blend morphology of PBDTTT-C based blends upon a systematic increase of the amount of DIO. Domains on the hundred nanometers length scale in the DIO-free blend are identified as neat fullerene agglomerates embedded in an intermixed matrix. With the addition of the additive, 0.6% and 1% DIO already substantially reduces the size of these domains until reaching the optimum 3% DIO mixture, where a 7.1% power conversion efficiency is obtained. It is brought into connection with the formation of interpenetrating polymer and fullerene phases. Similar to PBDTTT-C, the morphology of DIO-free PTB7:PC71BM blends is characterized by large fullerene domains being decreased in size upon the addition of 3% DIO. OTRACE measurements reveal a reduced Langevin-type, super-second order recombination in both blends. It is demonstrated that the deviation from bimolecular recombination kinetics cannot be fully attributed to the carrier density dependence of the mobility but is rather related to trapping in segregated PC71BM domains. Finally, with regard to small-molecule donors, a higher yield of photogeneration and balanced transport properties are identified as the dominant factors enhancing the efficiency of vacuum deposited MD376:C60 relative to its solution processed counterpart MD376:PC61BM. The finding is explained by a higher degree of dimerization of the merocyanine dye MD376 and a stronger donor-acceptor interaction at the interface in the case of the vacuum deposited blend. N2 - Organische Solarzellen sind dank der Möglichkeit einer preisgünstigen und umweltfreundlichen Herstellung eine erfolgversprechende Alternative zu konventionellen Photovoltaiktechnologien, bei denen heutzutage hauptsächlich Silizium zum Einsatz kommt. Ein aussichtsreiches Konzept ist dabei die Heterogemisch (bulk heterojunction , BHJ)-Solarzelle. Deren aktive Schicht besteht aus einer Elektron-gebenden und einer Elektron-entziehenden Komponente, wobei die Generierung von Photostrom entscheidend von der Durchmischung beider Materialien abhängt. Dieser Einfluss der Morphologie auf die Trennung von Polaronpaaren, den Transport von freien Ladungsträgern und deren nichtgeminale Rekombination wird durch die Verwendung der Ladungsextraktionsmethoden time delayed collection field (TDCF) sowie open circuit corrected transient charge extraction (OTRACE) in dieser Arbeit im Detail untersucht. Die vorgestellten Studien umfassen mit Polymeren und kleinen Molekülen als Donatoren sowie verschiedenen Fulleren-Akzeptoren unterschiedlichste Materialsysteme. Der erste Teil der Arbeit befasst sich mit der feldabhängigen Trennung von Polaronpaaren in Solarzellen, die unter Verwendung des Polymers pBTTT-C16 hergestellt werden. Das Materialsystem erlaubt eine systematische Anpassung der Morphologie durch Art und Anteil des Akzeptors. Die Untersuchungen zeigen, dass sowohl Überschussenergie als auch interkalierte Phasen lediglich eine geringe Auswirkung auf die Photogenerierung haben, diese jedoch stark von der Fullerenmenge im Gemisch beeinflusst wird. Das Ergebnis verdeutlicht, dass reine Fullerendomänen die treibende Kraft für eine effiziente Trennung von Polaronpaaren sind, was mit der Delokalisierung von Ladungsträgern verknüpft wird. Im zweiten Teil wird der Einfluss des Additivs Diiodooktan (DIO) auf das Materialsystem PBDTTT-C:PC71BM untersucht. Die Studie zeigt eine mehrstufige Änderung der Morphologie bei einer schrittweisen Erhöhung der verwendeten DIO Menge. Wird das Heterogemisch PBDTTT-C:PC71BM ohne DIO hergestellt, ist dessen Nanostruktur durch große Agglomerate geprägt, die als reine Fullerendomänen identifiziert werden. Bereits die Verwendung von 0.6% und 1% DIO führt zu einer deutlichen Verkleinerung dieser Domänen, wobei erst die maximale Effizienz der mit 3% DIO hergestellten Solarzelle mit der Ausbildung von vernetzten Polymer- und Fullerenphasen in Verbindung gebracht wird. Vergleichbar zu PBDTTT-C weist auch PTB7:PC71BM große Fullerendomänen und deren bessere Dispersion durch die Verwendung von 3% DIO auf. In beiden Fällen zeigt OTRACE eine reduzierte Langevin-artige Rekombination sowie die Abweichung von einem bimolekularen Verhalten. Da diese erhöhte Rekombinationsordnung nicht mit der Ladungsträgerdichtenabhängigkeit der Mobilität erklärt werden kann, wird sie dem Einfangen von Ladungsträgern in Fullerendomänen zugeordnet. Im letzten Teil wird gezeigt, dass eine ergiebigere Photogenerierung sowie ausgeglichene Transporteigenschaften eine erhöhte Bauteileffizienz von aufgedampften MD376:C60 Solarzellen im Vergleich zum flüssigprozessierten Pendant MD376:PC61BM bedingen. Die Beobachtung wird mit einer verbesserten Dimerisation des Merocyanins MD376 und einer stärkeren Donator-Akzeptor-Wechselwirkung an der Grenzfläche erklärt. KW - Organische Solarzelle KW - Photostrom KW - Ladungsträgergenerierung KW - geminale Rekombination KW - nichtgeminale Rekombination KW - Elektronentransport KW - Photovoltaik KW - Rekombination Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-117852 ER - TY - THES A1 - Sperlich, Andreas T1 - Electron Paramagnetic Resonance Spectroscopy of Conjugated Polymers and Fullerenes for Organic Photovoltaics T1 - Elektron-Paramagnetische Resonanz-Spektroskopie von konjugierten Polymeren und Fullerenen für die organische Photovoltaik N2 - In the presented thesis, the various excited states encountered in conjugated organic semiconductors are investigated with respect to their utilization in organic thin-film solar cells. Most of these states are spin-baring and can therefore be addressed by means of magnetic resonance spectroscopy. The primary singlet excitation (spin 0), as well as positive and negative polaronic charge carriers (spin 1/2) are discussed. Additionally, triplet excitons (spin 1) and charge transfer complexes are examined, focussing on their differing spin-spin interaction strength. For the investigation of these spin-baring states especially methods of electron paramagnetic resonance (EPR) are best suited. Therefore according experimental methods were implemented in the course of this work to study conjugated polymers, fullerenes and their blends with continuous wave as well as time-resolved EPR and optically detected magnetic resonance. N2 - Die vorliegende Arbeit beschäftigt sich mit den vielfältigen Anregungszuständen in konjugierten organischen Halbleitern mit Hinblick auf deren Verwendung in organischen Dünnschicht-Solarzellen. Diese verschiedenen Zustände sind zumeist Spin-behaftet und daher mit Methoden der Magnetresonanz adressierbar. Es wird unterschieden zwischen Singulett-Exzitonen (Spin 0) als primärer Photoanregung, sowie positiven und negativen polaronischen Ladungsträgern (Spin 1/2). Des Weiteren werden Triplet-Exzitonen (Spin 1) und Ladungstransferkomplexe behandelt, die sich durch unterschiedlich starke Spin-Spin Wechselwirkung auszeichnen. Zur Untersuchung dieser Spin-behafteten Zustände bieten sich insbesondere Methoden der Elektron-Paramagnetischen Resonanz-Spektroskopie (EPR) an. Im Zuge dieser Arbeit wurden dafür entsprechede Messmethoden der Dauerstrich (cw) EPR, zeitaufgelösten, transienten EPR und der optisch detektierten Magnetresonanz (ODMR) implementiert und zur Erforschung von konjugierten Polymeren, Fullerenen und deren Mischungen eingesetzt. KW - Organische Solarzelle KW - Fotovoltaik KW - Organischer Halbleiter KW - organische Photovoltaik KW - organische Halbleiter KW - organic photovoltaic KW - organic solar cells KW - Elektronenspinresonanz KW - Fullerene KW - Konjugierte Polymere KW - Photovoltaik KW - Spektroskopie Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-81244 ER - TY - THES A1 - Mayerhöffer, Ulrich T1 - Synthese, Eigenschaften und funktionale Anwendungen von NIR absorbierenden Squarainen T1 - Synthesis, Properties and Functional Applications of NIR Absorbing Squaraines N2 - Zusammenfassend lässt sich festhalten, dass die in dieser Abreit vorgestellten Squaraine herausragend gute NIR-Absorptions- und NIR-Emissionseigenschaften aufweisen, die sie für zahlreiche Anwendungen interessant machen. Darüber hinaus konnte gezeigt werden, dass ihre besondere cis-Konfiguration und ihr daraus resultierendes Dipolmoment zu vorteilhaften Anordnungen in dünnen Filmen und in Blends mit PCBM führen. Diese Strukturen zeigen für dipolare Moleküle beeindruckende Exzitonen- und Ladungstransporteigenschaften, die vielversprechende Anwendungen in der organischen Elektronik wie in hier untersuchten lösungsprozessierten BHJ-Solarzellen oder auch in OFETs erwarten lassen. N2 - Concluding the results of the present work, the here descript acceptor-substituted squaraines exhibit extremely favourable NIR absorption and emission properties which make them to ideal candidates for a broad variety of functional applications. Furthermore, the additional acceptor functions provoke a cis-configuration, resulting in a permanent ground state dipole moment which becomes a dominating ordering force in supramolecular arrangements of those squaraine dyes in solution as well as in thin organic films and in blends with PCBM. These structures feature unprecedented exciton and charge carrier mobilities for dipolar molecules with promising properties for the application in organic photovoltaics, as demonstrated in this work and for possible future applications such as OFETs. KW - Supramolekulare Chemie KW - Squaraine KW - Photovoltaik KW - NIR KW - Organische Chemie KW - Organic Chemistry KW - supramolecular Chemistry KW - Squaraine KW - Photovoltaic KW - NIR Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69428 ER - TY - THES A1 - Linder, Susanne T1 - Räumliche Diffusion von Photovoltaik-Anlagen in Baden-Württemberg T1 - Spatial diffusion of photovoltaic installations in the German federal state of Baden-Württemberg N2 - Seit dem Jahr 2000 ist die Anzahl an installierten Photovoltaik-Anlagen in Deutschland – dank günstiger politischer Rahmenbedingungen – rasant von 76 MWp auf 24.820 MWp in 2011 gestiegen. Trotz bundesweit einheitlicher finanzieller Förderbedingungen durch das Erneuerbare-Energien-Gesetz existieren jedoch räumliche Unterschiede in der Anzahl an installierten Photovoltaik-Anlagen pro Einwohner, sowohl auf Ebene der Bundesländer, als auch zwischen einzelnen Gemeinden einer Region. In der vorliegenden Arbeit wird die räumliche Diffusion von Photovoltaik-Anlagen in Baden-Württemberg untersucht. Ziel ist zum einen die Ursachen für die räumlichen Unterschiede in der Photovoltaik-Diffusion aufzudecken. Zum anderen ist das Ziel zu überprüfen, ob ein Nachbarschaftseffekt der Photovoltaik-Diffusion existiert. Dies wird mit Hilfe quantitativer und qualitativer Methoden untersucht. Mit Hilfe der räumlichen Autokorrelationsanalyse wird gezeigt, dass sich die Anzahl an Photovoltaik-Anlagen pro Einwohner in den Gemeinden Baden-Württembergs signifikant unterscheidet. Es existieren Cluster von Gemeinden mit besonders hoher Photovoltaik-Nutzung (Hot Spots) und Cluster von Gemeinden mit besonders niedriger Photovoltaik-Nutzung (Cold Spots). Hot Spot-Gemeinden befinden sich zu 95% im ländlichen Raum und Cold Spot-Gemeinden zu 85% im Verdichtungsraum. Die Ergebnisse der räumlichen Regressionsanalyse und der Fallstudie in der Region Heilbronn-Franken zeigen, dass die Unterschiede in der Dichte der Photovoltaik-Anlagen pro Einwohner erstens auf Unterschiede in der Siedlungsstruktur zurückzuführen sind (Anteil an Ein- und Zweifamilienhäusern, Anteil an Neubauten, Anzahl an Viehbetrieben pro Einwohner), zweitens auf Unterschiede im Sozialgefüge (Anteil an Familien) sowie drittens auf den Nachbarschaftseffekt der Diffusion. Aus den Experteninterviews geht hervor, dass zudem weitere lokale Voraussetzungen gegeben sein müssen, damit es zu einer schnellen Photovoltaik-Diffusion kommt. Eine wichtige Rolle spielen die Landwirte, die häufig als Innovatoren auftraten, sowie sog. Change Agents, die den Diffusionsprozess anstoßen und bewusst fördern. Zu letzteren zählen auf lokaler Ebene aktive Bürgermeister, Solarvereine, Photovoltaik-Unternehmer oder Elektroinstallateure, auf regionaler Ebene Maschinenringe und Energieagenturen. Die Modellierung und Analyse der Photovoltaik-Diffusion in den einzelnen Gemeinden von 2000 bis 2030 zeigt für das Jahr 2009, dass die Gemeinden einer Raumkategorie unterschiedliche Diffusionsprofile aufweisen. Je ländlicher eine Gemeinde ist, desto weiter ist tendenziell der Diffusionsprozess fortgeschritten: In Gemeinden des ländlichen Raums befindet sich die Photovoltaik-Diffusion meist bereits im Early Majority-Stadium, in Gemeinden des Verdichtungsraums ist die Photovoltaik-Diffusion dagegen überwiegend erst am Ende des Early Adopter-Stadiums angelangt. Der Innovationseffekt, der angibt, wie stark die Anzahl an Photovoltaik-Anlagen unabhängig von den bereits installierten Anlagen zunimmt, ist im suburbanen Raum und im ländlichen Raum am höchsten. Der Imitationseffekt, der angibt, wie stark die Zunahme neu installierter Photovoltaik-Anlagen von bestehenden Anlagen in einer Gemeinde abhängt, steigt dagegen von der Stadt zum Land an. Durch den Vergleich der Hot Spot-Gemeinden mit den übrigen Gemeinden des ländlichen Raums wird deutlich, dass die Imitation in den Hot Spot-Gemeinden höher liegt. Dies lässt darauf schließen, dass ein Nachbarschaftseffekt der Photovoltaik-Diffusion zwischen den Gemeinden existiert, da die Lage innerhalb eines Hot Spots zu einer erhöhten Wahrnehmung von Photovoltaik-Anlagen und einem häufigeren Austausch mit Photovoltaik-Besitzern führt und damit die Photovoltaik-Diffusion fördert. Vor dem Hintergrund des Klimawandels und der knapper werdenden fossilen Ressourcen gilt in Deutschland das Ziel, die Nutzung erneuerbarer Energien und damit auch der Photovoltaik weiter voranzutreiben. Diese Arbeit zeigt, dass lokale Einflussfaktoren entscheidend für das Entstehen räumlicher Unterschiede in der Photovoltaik-Nutzung sind. Die Kenntnisse dieser Unterschiede, deren Ursachen sowie die Bedeutung des Nachbarschaftseffekts können eine Grundlage für gezielte Förderung oder Marketingmaßnahmen zur weiteren Diffusion von Photovoltaik-Anlagen bieten. N2 - Since 2000, the number of photovoltaic systems installed in Germany has significantly increased from 76 MWp to 24,820 MWp in 2011. This can be attributed to a favourable policy framework. Despite a nationaly uniform financial incentive scheme supported by the Renewable Energies Act (EEG), spatial differences in the number of photovoltaic systems installed per capita can be observed between the federal states as well as among individual municipalities. This study analyses the spatial diffusion of photovoltaic installations in the German federal state of Baden-Württemberg. The first aim of the study is to identify the reasons for spatial differences in diffusion. The second aim is to examine whether there is a neighbourhood effect in the spatial diffusion of photovoltaic installations. The study is based on quantitative and qualitative methods. The analysis of spatial autocorrelation shows that the number of photovoltaic installations per capita differs significantly among the municipalities in Baden-Württemberg. The analysis reveals the presence of clusters of municipalities with above average photovoltaic development (Hot Spots) and below average photovoltaic development (Cold Spots). The results show that 95 % of the Hot Spot municipalities are located in rural areas while 85 % of the Cold Spot municipalities are found in urban agglomerations. Both the results of the spatial regression analysis and the case study of the region Heilbronn-Franken, indicate that differences in the density of photovoltaic installations per capita arise for three main reasons: firstly, because of differences in the settlement structure (percentage of detached and semi-detached houses, percentage of new houses, percentage of livestock farms), secondly, because of differences in the social structure (percentage of families), and thirdly, because of the neighbourhood effect of diffusion. Expert interviews identified that additional local conditions play an important role in promoting the diffusion of photovoltaic installations. Particularly farmers play a crucial role in the diffusion as they often act as innovators. The photovoltaic diffusion process is often triggered and promoted by change agents. On a local level, change agents are active mayors, solar initiatives, photovoltaic entrepreneurs or electricians. On a regional level, these are machinery rings or energy agencies. The results of the model for the analysis (from 2000 to 2030) of the diffusion of photovoltaic installations in the municipalities show that in 2009 municipalities of different spatial categories display different diffusion profiles. The more rural a municipality is, the more advanced the diffusion process: municipalities in rural areas have mostly reached the point of inflection of the diffusion curve and adopters now belong to the Early Majority. Municipalities in urban areas still belong to the Early Adopters. The coefficient of innovation indicating the extent at which the number of photovoltaic installations increases independently from other installations, is highest in suburban and rural areas. The coefficient of imitation indicating the strength of dependence in the development of new photovoltaic installations from existing ones, increases from urban to rural areas. The comparison of Hot Spot municipalities with the remaining municipalities of the rural areas shows that the coefficient of imitation is higher in Hot Spot municipalities. Thus, one can conclude that there is a neighbourhood effect in the diffusion of photovoltaic installations among municipalities. The position within a Hot Spot advances the perception of photovoltaic installations and increases interaction and communication among photovoltaic owners promoting the diffusion of the technology. In the context of climate change and the limited availability of fossil fuels, the use of renewable energies e.g. photovoltaic installations should be further encouraged in Germany. This study shows that local conditions significantly impact the development of spatial differences in the use of photovoltaic technology. Understanding the reasons for these spatial differences and the neighbourhood effect can help to define well-directed incentives and to develop marketing strategies to further promote the diffusion of photovoltaic installations. T3 - Würzburger Geographische Arbeiten - 109 KW - Baden-Württemberg KW - Photovoltaikanlage KW - Räumliche Verteilung KW - Räumliche Diffusion KW - Nachbarschaftseffekt KW - Räumliche Autokorrelation KW - Bass-Modell KW - Diffusion von Innovationen KW - Photovoltaik KW - spatial diffusion KW - photovoltaic KW - neighbourhood effect KW - spatial autocorrelation KW - Bass Model KW - diffusion of innovation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-77789 ER - TY - THES A1 - Gieseking, Björn T1 - Excitation Dynamics and Charge Carrier Generation in Organic Semiconductors T1 - Anregungsdynamik und Ladungsträgergenerierung in organischen Halbleitern N2 - The transport of optically excited states, called excitons, as well as their conversion into charges define the two major steps allowing for the operation of organic photovoltaic (OPV) devices. Hence, a deep understanding of these processes, the involved mechanisms as well as possible loss channels is crucial for further improving the efficiency of organic solar cells. For studying the aforementioned processes spectroscopic methods like absorption and emission measurements are useful tools. As many of the processes take place on a sub-nanosecond (ns) timescale ultrafast spectroscopic methods are required. Due to this reason two experiments based on a femtosecond laser system were built and employed in this work, namely picosecond (ps) time-resolved photoluminescence (PL) and transient absorption (TA) spectroscopy. By analyzing the PL decay dynamics in the prototypical organic semiconductor rubrene, the feasibility of a new approach for improving the efficiency of organic solar cells by harvesting triplet excitons generated by singlet fission was examined. Singlet fission describes a process where two triplet excitons are generated via a photoexcited singlet exciton precursor state if the energy of the two triplets is comparable with the energy of the singlet. For this purpose the influence of characteristic length scales on the exciton dynamics in different rubrene morphologies exhibiting an increasing degree of confinement was analyzed. The results show that the quenching at interfacial states efficiently suppresses the desired fission process if these states are reached by excitons during migration. Since interfacial states are expected to play a significant role in thin film solar cells and are easily accessible for the migrating excitons, the results have to be considered for triplet-based OPV. While the aforementioned approach is only investigated for model systems so far, the efficiency of disordered organic bulk heterojunction (BHJ) solar cells could be significantly enhanced in the last couple of years by employing new and more complex copolymer donor materials. However, little is known about the photophysics and in particular the excitation dynamics of these systems. By carrying out a systematic optical study on the prominent copolymer PCDTBT and its building blocks we were able to identify the nature of the two characteristic absorption bands and the coupling mechanism between these levels. The latter mechanism is based on an intrachain partial charge transfer between two functional subunits and our time-resolved measurements indicate that this coupling governs the photophysical properties of solar cells based on these copolymers. The efficient coupling of functional subunits can be seen as a key aspect that guarantees for the success of the copolymer approach. Another important issue concerns the optimization of the morphology of BHJ solar cells. It arises from the discrepancy between the exciton diffusion length \mbox{($\approx$ 10 nm)} and the absorption length of solar irradiation ($\approx$ 100 nm). Due to this reason, even for devices based on new copolymer materials, processing parameters affecting the morphology like annealing or employing processing additives are of major importance. In our combined optical, electrical and morphological study for solar cells based on the high-efficient copolymer PBDTTT-C we find a direct correlation between additive content and intermixing of the active layer. The observed maximum in device efficiency can be attributed to a morphology guaranteeing for an optimized balance between charge generation and transport. Our results highlight the importance of understanding the influence of processing parameters on the morphology of the BHJ and thus on the efficiency of the device. N2 - Der Transport optischer Anregungen, genannt Exzitonen, sowie deren Umwandlung in Ladungsträger stellen die beiden wesentlichen Mechanismen dar, welche die Funktion von organischer Photovoltaik (OPV) erst ermöglichen. Daher ist ein genaues Verständnis dieser Prozesse, der beteiligten Mechanismen sowie möglicher Verlustkanäle von essentieller Bedeutung, um die Effizienz organischer Solarzellen weiter zu steigern. Für die Untersuchung der genannten Vorgänge bieten sich grundsätzlich spektroskopische Methoden, wie etwa die Untersuchung der Absorptions- und Emissioncharakteristiken, an. Da sich viele der erwähnten Prozesse auf der sub-Nanosekunden (ns) Zeitskala abspielen, werden für deren Unteruchung hoch-zeitaufgelöste Messmethoden benötigt. Aus diesem Grund wurden im Rahmen dieser Arbeit zwei Messmethoden, basierend auf einem Femtosekunden-Lasersystem aufgebaut und verwendet. Hierbei handelt es sich um die Picosekunden (ps) zeitaufgelöste Photolumineszenz-Spektroskopie (PL) und die transiente Absorptionsspektroskopie (TA). Anhand des prototypischen organischen Halbleiters Rubren habe ich mich mit der Fragestellung beschäftigt, inwieweit ein alternativer Ansatz zur Erhöhung der Effizienz von organischen Solarzellen, basierend auf der Nutzung von Triplet Exzitonen, welche durch Singlet Fission generiert wurden, genutzt werden könnte. Bei der Singlet Fission werden aus einem optisch angeregten Singlet Exziton zwei Triplet Exzitonen erzeugt, unter der Voraussetzung, dass die Summe der Energien der beiden Triplets in etwa der Energie des Singlet Exzitons entspricht. Hierfür wurde der Einfluss von charakteristischen Längenskalen auf die Exzitonendynamik in verschiedenen Rubren-Morphologien, die ein zunehmend begrenztes Anregungsvolumen aufweisen, untersucht. Dabei zeigt sich, dass durch den Einfluss von Grenzflächenzuständen der erwünschte Singlet Fission Prozess effizient unterdrückt wird, sollten diese Zustände von Exzitonen während ihrer Migration erreicht werden. Dieser Sachverhalt ist bei einer möglichen Realisierung von Triplet-basierter OPV zu berücksichtigen, da in Dünnschicht-Solarzellen solche Grenzflächenzustände eine relevante Rolle spielen und für Exzitonen gut zugänglich sind. Während der oben genannte Ansatz bis jetzt nur für Modellsysteme untersucht wird, konnte die Effizienz ungeordneter organischer ''bulk heterojunction'' (heterogemisch, BHJ) Solarzellen in den vergangenen Jahren durch die Verwendung neuer, komplexerer Donormaterialen signifikant gesteigert werden. Allerdings war eine genaue Kenntnis der dahinter stehenden Photophysik und insbesondere der Anregungsdynamik dieser Systeme nicht vorhanden. Anhand einer systematischen optischen Studie am prominenten Copolymer PCDTBT und seiner Bausteine konnte die Natur der angeregten Zustände und deren Kopplungsmechanismus, basierend auf einem teilweisen Ladungsübertrag zwischen zwei funktionalen Gruppen des Copolymers identifiziert werden. Die Ergebnisse der zeitaufgelösten Messungen deuten darauf hin, dass dieser interne Kopplungsmechanismus die Photophysik von organischen Solarzellen, basierend auf diesen Copolymeren bestimmt. Diese effiziente Kopplung ist ein wesentlicher Grund für den Erfolg des Copolymerkonzeptes. Ein weiterer wichtiger Aspekt betrifft die Optimierung der Morphologie der aktiven Schicht von BHJ Solarzellen, welcher sich aus der Diskrepanz zwischen Exzitonendiffusionslänge ($\approx$ 10 nm) und Absorptionslänge des Sonnenlichts \mbox{($\approx$ 100 nm)} ergibt. Aus diesem Grund sind auch bei BHJ Zellen, basierend auf neuartigen Copolymeren die Prozessparameter, welche die Morphologie beeinflussen --- wie das Ausheizen der Zelle oder die Zugabe von Additiven --- von großer Bedeutung. Unsere kombinierte optische, elektrische und morphologische Studie an Solarzellen, basierend auf dem hocheffizienten Copolymer PBDTTT-C zeigt dabei einen direkten Zusammenhang von Additivkonzentration und Durchmischungsgrad der aktiven Schicht. Das beobachtete Effizienzmaximum ergibt sich dabei für diejenige Morphologie, welche ein optimiertes Gleichgewicht zwischen Erzeugung und Transport von Ladungsträgern aufweist. Die Ergebnisse verdeutlichen, wie wichtig das Verständnis der Auswirkungen einzelner Prozessparameter auf die Morphologie und damit die Effizienz von BHJ Solarzellen ist. KW - Organische Solarzelle KW - Photovoltaik KW - Organischer Halbleiter KW - Charge Carrier Generation KW - Singlet Fission KW - Experimental Physics KW - Ultrafast Spectroscopy KW - Organic Semiconductors KW - Organic Photovoltaics KW - Excitons Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-101625 ER - TY - RPRT A1 - Geßner, Daniel T1 - Performance of Renewable Energy Policies – Evidence from Germany’s Transition to Auctions N2 - Government support for green technologies and renewable energy in particular has become an integral cornerstone of economic policy for most industrialized economies. Due to competitive price determination and supposedly higher efficiency, auctions have in recent years widely succeeded feed-in-tariffs as the primary support instrument (del Rio & Linares, 2014; REN21, 2021). However, literature still struggles to produce causal evidence to validate mostly descriptive findings for efficiency gains. Yet, this evidence is needed as a foundation to provide robust recommendations to policy makers (Grashof et al., 2020). By utilizing a difference-in-differences approach, this paper provides such evidence for a German photovoltaic (PV) auctioning program which came into effect in 2015. Results for this natural experiment confirm that cost-effectiveness improved significantly while previous literature shows that capacity expansion remained high. Results additionally show that falling prices for PV panels were the primary driver of cost reductions and wages also exert high influence on support price. Input cost development therefore indeed strongly influences support level which was the aim with introducing competitive auctions. Interest rate development cannot be linked to support level development, most probably due to the low interest environment in considered period. T3 - Würzburg Economic Papers (W. E. P.) - 105 KW - Photovoltaik KW - Erneuerbare Energien KW - Ausschreibungen KW - auctions KW - photovoltaic KW - renewable energy policy KW - policy evaluation KW - difference-in-differences Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-325426 ER - TY - THES A1 - Baumann, Andreas T1 - Charge Transport and Recombination Dynamics in Organic Bulk Heterojunction Solar Cells T1 - Ladungstransport und Rekombination in organischen Heterogemisch-Solarzellen N2 - The charge transport in disordered organic bulk heterojunction (BHJ) solar cells is a crucial process affecting the power conversion efficiency (PCE) of the solar cell. With the need of synthesizing new materials for improving the power conversion efficiency of those cells it is important to study not only the photophysical but also the electrical properties of the new material classes. Thereby, the experimental techniques need to be applicable to operating solar cells. In this work, the conventional methods of transient photoconductivity (also known as "Time-of-Flight" (TOF)), as well as the transient charge extraction technique of "Charge Carrier Extraction by Linearly Increasing Voltage" (CELIV) are performed on different organic blend compositions. Especially with the latter it is feasible to study the dynamics, i.e. charge transport and charge carrier recombination, in bulk heterojunction (BHJ) solar cells with active layer thicknesses of 100-200 nm. For a well performing organic BHJ solar cells the morphology is the most crucial parameter finding a trade-off between an efficient photogeneration of charge carriers and the transport of the latter to the electrodes. Besides the morphology, the nature of energetic disorder of the active material blend and its influence on the dynamics are discussed extensively in this work. Thereby, the material system of poly(3-hexylthiophene-2,5-diyl) (P3HT) and [6,6]-phenyl-C61 butyric acid methyl ester (PC61BM) serves mainly as a reference material system. New promising donor or acceptor materials and their potential for application in organic photovoltaics are studied in view of charge dynamics and compared with the reference system. With the need for commercialization of organic solar cells the question of the impact of environmental conditions on the PCE of the solar cells raises. In this work, organic BHJ solar cells exposed to synthetic air for finite duration are studied in view of the charge carrier transport and recombination dynamics. Finally, within the framework of this work the technique of photo-CELIV is improved. With the modified technique it is now feasible to study the mobility and lifetime of charge carriers in organic solar cells under operating conditions. N2 - Der Ladungstransport in ungeordneten organischen "bulk heterojunction" (Heterogemisch, Abk.: BHJ) Solarzellen stellt einen kritischen Prozess dar, der den Wirkungsgrad wesentlich beeinflusst. Aufgrund der großen Nachfrage neuer, vielversprechender Materialien für die organische Photovoltaik, ist es um so wichtiger nicht nur ihre photophysikalischen sondern auch deren elektrischen Eigenschaften zu charakterisieren. Gerade letztere erfordern experimentelle Messmethoden, die an funktionsfähigen Solarzellen angewandt werden können. Zur experimentellen Untersuchung des Landungstransportes in organischen Solarzellen werden in dieser Arbeit die Methoden der transienten Photoleitfähigkeit, auch bekannt als "Time-of-Flight" (TOF), sowie die transiente Ladungsextraktionsmethode "Charge Carrier Extraction by Linearly Increasing Voltage'' (CELIV) verwendet. Gerade Letztere ermöglicht es an Dünnschichtsystemen von nur wenigen 100 nm, eine typische Schichtdicke bei organischen Solarzellen, den Ladungstransport aber auch die Rekombination von Elektronen und Löchern zu untersuchen. Entscheidend für eine vielversprechende funktionsfähige organische BHJ Solarzelle ist dabei eine günstige Morphologie, die eine effiziente Generation von Ladungsträger, sowie deren Abführung zu den Elektroden erlaubt. Dabei wird in dieser Arbeit der Einfluss der räumlichen, als auch der der energetischen Unordnung der photoaktiven Schicht auf den Ladungstransport und der Rekombination der Ladungsträger untersucht. Das weit verbreitete Materialsystem bestehend aus Poly-3-(Hexyl) Thiophen (P3HT) und [6,6]-Phenyl C61 Buttersäure Methylester (PC61BM) dient dabei als Donator-Akzeptor Referenzsystem. Neuartige Donator- bzw. Akzeptor-Materialien und deren Potential für künftige Anwendungen in der organischen Photovoltaik werden hinsichtlich ihrer Ladungsträgereigenschaften mit dem Referenzmaterialsystem verglichen. Im Zuge der Kommerzialisierung organischer Solarzellen bzw. Solarmodulen ist die Anfälligkeit der Zellen gegenüber äußeren Umwelteinflüssen, wie Sauerstoff oder Wasser, in den Vordergrund des wissenschaftlichen Interesses gerückt. Dementsprechend wird in dieser Arbeit auch der Einfluss von synthetischer Luft auf den Transport und die Rekombination von Ladungsträgern und somit auf den Wirkungsgrad der Solarzelle untersucht und diskutiert. Schließlich wird im Rahmen dieser Arbeit eine Erweiterung der photo-CELIV Messmethode vorgestellt. Diese ermöglicht es die Lebensdauer und den Transport von Ladungsträgern in organischen Dünnschicht-Solarzellen unter realen Arbeitsbedingungen, d.h. Beleuchtung unter einer Sonne bei Raumtemperatur, zu bestimmen. KW - Photovoltaik KW - Ladungstransport KW - Rekombination KW - organische Photovoltaik KW - Ladungsträgerrekombination KW - photo-CELIV KW - organic solar cells KW - organic semicondcutors KW - recombination KW - photo-CELIV Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-64915 ER - TY - THES A1 - Anneser, Katrin T1 - Elektrochemische Doppelschichtkondensatoren zur Stabilisierung fluktuierender photovoltaischer Leistung T1 - Electric double layer capacitors for stabilizing intermittent photovoltaic power N2 - Der Ausbau der regenerativen Energiequellen führt vermehrt zu unvorhersehbaren Schwankungen der erzeugten Leistung, da Windkraft und Photovoltaik von natürlichen Bedingungen abhängen. Gerade Kurzzeitfluktuationen im Sekunden- bis Minutenbereich, die bei Solarzellen durch die Verschattung von vorüberziehenden Wolken zustande kommen, wird bislang wenig Beachtung geschenkt. Kurzzeitspeicher müssen eine hohe Zyklenstabilität aufweisen, um zur Glättung dieser Leistungsfluktuationen in Frage zu kommen. Im Rahmen der vorliegenden Dissertation wurden elektrochemische Doppelschichtkondensatoren für die Kopplung mit Siliziumsolarzellen und organischen Solarmodulen mit Hilfe von Simulationen und Messungen untersucht. Zusätzlich wurden grundlegende Fragestellungen zur Prozessierung und Alterung von Doppelschichtkondensatoren im Hinblick auf ein in der Literatur bereits diskutiertes System betrachtet, das beide Komponenten in einem Bauteil integriert - den sogenannten photocapacitor. Um die Druckbarkeit des gesamten elektrochemischen Doppelschichtkondensators zu ermöglichen, wurde der konventionell verwendete Flüssigelektrolyt durch einen Polymer-Gel-Elektrolyten auf Basis von Polyvinylalkohol und einer Säure ersetzt. Durch eine Verbesserung der Prozessierung konnte ein größerer Anteil der spezifischen Fläche der porösen Kohlenstoffelektroden vom Elektrolyten benetzt und somit zur Speicherung genutzt werden. Die Untersuchungen zeigen, dass mit Polymer-Gel-Elektrolyten ähnliche Kapazitäten erreicht werden wie mit Flüssigelektrolyten. Im Hinblick auf die Anwendung im gekoppelten System muss der elektrochemische Doppelschichtkondensator den gleichen Umweltbedingungen hinsichtlich Temperatur und Luftfeuchte standhalten wie die Solarzelle. Hierzu wurden umfangreiche Alterungstests durchgeführt und festgestellt, dass die Kapazität zwar bei Austrocknung des wasserhaltigen Polymer-Gel-Elektrolyten sinkt, bei einer Wiederbefeuchtung aber auch eine Regeneration des Speichers erfolgt. Zur passenden Auslegung des elektrochemischen Doppelschichtkondensators wurde eine detaillierte Analyse der Leistungsfluktuationen durchgeführt, die mit einem eigens entwickelten MPP-Messgerät an organischen Solarmodulen gemessen wurden. Anhand der Daten wurde analysiert, welche Energiemengen für welche Zeit im Kurzzeitspeicher zwischengespeichert werden müssen, um eine effiziente Glättung der ins Netz einzuspeisenden Leistung zu erreichen. Aus der Statistik der Fluktuationen wurde eine Kapazität berechnet, die als Richtwert in die Simulationen einging und dann mit anderen Kapazitäten verglichen wurde. Neben einem idealen MPP-Tracking für verschiedene Arten von Solarzellen und Beleuchtungsprofilen konnte die Simulation auch die Kopplung aus Solarzelle und elektrochemischem Doppelschichtkondensator mit zwei verschiedenen Betriebsstrategien nachbilden. Zum einen wurde ein fester Lastwiderstand genutzt, zum anderen eine Zielspannung für den Kurzzeitspeicher und somit auch die Solarzelle vorgegeben und der Lastwiderstand variabel so angepasst, dass die Zielspannung gehalten wird. Beide Betriebsmethoden haben einen Energieverlust gegenüber der MPP-getrackten Solarzelle zu verzeichnen, führen aber zu einer Glättung der Leistung des gekoppelten Systems. Die Simulation konnte für Siliziumsolarzellen mit einem Demonstratorversuch im Labor und für organische Solarzellen unter realen Bedingungen validiert werden. Insgesamt ergibt sich eine vielversprechende Glättung der Leistungsfluktuationen von Solarzellen durch den Einsatz von elektrochemischen Doppelschichtkondensatoren. N2 - The increased usage of regenerative energy sources leads to more unpredictable fluctuations in power output, as wind power and photovoltaics depend on natural conditions. Especially short-term fluctuations in the range of seconds to minutes, which occur in solar cells due to the shading by passing clouds, have received little attention so far. Corresponding short-term storage units that can be used to smooth these power fluctuations must have a high cycle stability. In the scope of this thesis the suitability of electrochemical double layer capacitors for coupling with silicon solar cells and organic solar modules was investigated with simulations and measurements. Processing methods and aging of electrochemical double layer capacitors in respect to an integrated system consisting of both components - already discussed in the literature as the so-called photocapacitor - were considered. As the liquid electrolyte was replaced by a polymer gel electrolyte based on polyvinyl alcohol and an acid in order to enable printability of the entire electrochemical double-layer capacitor. An increase of the capacitance to the level of the capacitance for electrodes with liquid electrolytes was achieved by improved processing in which a larger proportion of the specific area of the porous carbon electrodes could be wetted by the electrolyte and thus used for storage. In the application as coupled system the electrochemical double-layer capacitor must withstand the same environmental conditions with regard to temperature and humidity as the solar cell. Extensive aging tests were carried out and it was found that, although the capacitance decreases when the water-containing polymer gel electrolyte dries out, remoistening also regenerates the storage capacitance. A detailed analysis of the power fluctuations, which were measured under real conditions with small organic solar modules using a specially developed MPP measuring device, was carried out to determine the appropriate characteristics of the electrochemical double layer capacitor. Using a mathematically smoothed mean curve, it was determined which amounts of energy have to be stored in the short-term storage device for which time in order to achieve the smoothed curve. From the statistics of the fluctuations a capacitance could be calculated which was used as a guide value in the simulations and could then be compared to the impact of other capacities. In addition to ideal MPP tracking for different types of solar cells and lighting profiles, the simulation was also able to model the coupling of solar cell and electrochemical double layer capacitor with two different operating strategies. On the one hand a fixed load resistance was used, on the other hand a target voltage for the short-term storage device and thus also for the solar cell was specified. The load resistance was variably adapted so that the target voltage was reached. Both operating methods show an energy loss compared to the MPP tracked solar cell without storage component, but lead to smoothing of the power output of the coupled system. The simulation could be validated for silicon solar cells with a demonstrator test in the laboratory and for organic solar cells on the external test setup under real conditions. Overall, the use of electrochemical double layer capacitors results in a promising smoothing of the power fluctuations of solar cells. KW - Energie KW - Photovoltaik KW - Energiespeicher Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-199339 ER -