TY - JOUR A1 - Krug, Ralf A1 - Volland, Julian A1 - Reich, Sebastian A1 - Soliman, Sebastian A1 - Connert, Thomas A1 - Krastl, Gabriel T1 - Guided endodontic treatment of multiple teeth with dentin dysplasia: a case report JF - Head & Face Medicine N2 - Background To report the outcome of guided endodontic treatment (GET) of a case of dentin dysplasia with pulp canal calcification (PCC) and apical periodontitis based on the use of a 3D-printed template designed by merging cone-beam computed tomography (CBCT) and surface scan data. Case presentation A 12-year old female with radicular dentin dysplasia type I (DD-1) presented for endodontic treatment. Radiography revealed PCC in all teeth and apical radiolucency in seven teeth (12, 15, 26, 31, 32, 36 and 46). Tooth 36 had the most acute symptoms and was thus treated first by conventional access cavity preparation and root canal detection. Despite meticulous technique, the distal and mesiolingual canals were perforated. The perforations were immediately repaired with mineral trioxide aggregate, and the decision was made to switch to guided endodontic treatment for the remaining 6 teeth. CBCT and intraoral surface scans were acquired and matched using coDiagnostix planning software (Dental Wings Inc.), the respective drill positions for root canal location were determined, and templates were virtually designed and 3D-printed. The template was positioned on the respective tooth, and a customized drill was used to penetrate the calcified part of the root canal and perform minimally invasive access cavity preparation up to the apical region. All root canals were rapidly and successfully located with the templates. At 1-year follow-up, clear signs of apical healing were present in all treated teeth. Conclusions In patients with dentin dysplasia, conventional endodontic therapy is challenging. GET considerably facilitates the root canal treatment of teeth affected by dentin dysplasia. KW - guided endodontics KW - pulp canal calcification KW - dentin dysplasia KW - root canal treatment KW - template KW - access caity preparation KW - beam computed tomography KW - canal calcification KW - permanent KW - obliteration Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-230271 VL - 16 ER - TY - THES A1 - Reich, Sebastian T1 - Computergestütztes Auffinden obliterierter Wurzelkanäle mit Hilfe der Planungssoftware SicatEndo und CDX – eine In-vitro-Vergleichsstudie T1 - Computer based access cavity preparation in teeth with pulp canal obliteration by using the software sicat endo and cdx - a comparative in vitro study N2 - Ziel der Untersuchung: Verglichen wurden die räumlichen Abweichungen der Bohrpfade nach virtueller Planung von Schablonen geführten Trepanationen mit Hilfe der Softwaresysteme SicatEndo (SE) und coDiagnostiX (CDX) und der benötigte Arbeitsaufwand. Material und Methode: Basierend auf µCT-Datensätzen von humanen obliterierten Frontzähnen wurden identische Kunststoffzähne und acht Zahnmodelle (4 Ober-, 4 Unterkiefer) hergestellt. Es wurde jeweils ein DVT und ein Oberflächenscan angefertigt. Diese Datensätze (DICOM; STL) wurden in die Softwaresysteme importiert und fusioniert. Anschließend wurden die Bohrpfade für je 16 Probenzähne pro Software geplant. Mit Hilfe der erstellten Schablonen wurden alle Trepanationen an den im Phantomkopf fixierten Modellen von einem Behandler durchgeführt. Nach Erschließung des apikalen Wurzelkanalanteils wurde ein DVT angefertigt und mit dem präoperativen DVT überlagert. Die räumliche drei-dimensionale (3D) Abweichung zwischen virtuell geplantem und tatsächlichem Bohrpfad wurde über die Vektorlänge bestimmt und der Arbeitsaufwand anhand der Planungszeit und der Anzahl der Mausklicks pro Kiefer erfasst. Ergebnisse: Für die Trepanationen mit SE zeigten sich signifikant geringe Abweichungen an der Bohrerspitze vestibulär-oral [CDX 0,54mm ± 0,32mm; SE 0,12mm ± 0,11mm; p < 0.05], 3D [CDX 0,74mm ± 0,26 mm; SE 0,35mm ± 0,17mm; p < 0.05] und hinsichtlich des Winkels [CDX 1,57° ± 0,76°; SE 0,68° ± 0,41°; p < 0.05] als mit CDX. Für CDX war der Planungsaufwand signifikant geringer als für SE hinsichtlich Planungszeit [CDX Ø 10min 50sec; SE Ø 20min 28sec] und hinsichtlich der Anzahl der Klicks pro Kiefer [CDX Ø 107; SE Ø 341]. Zusammenfassung: Beide Planungssysteme ermöglichen ausreichend präzise Schablonen geführte Bohrungen zur Erschließung apikaler Wurzelkanalanteile. N2 - Aim: To compare the accuracy and effort of digital workflow for guided endodontic access procedures using two different software applications in 3D-printed teeth modeled to simulate pulp canal obliteration in vitro. Materials and methods: 32 3D-printed incisors with simulated PCO were fabricated and mounted, four each on maxillary and mandibular study arches. Cone beam computed tomography (CBCT) and 3D surface scans were matched and used to virtually plan and prepare GEA by one operator using two different methods: 1) coDiagnostiX (CDX) with 3D-printed templates, and 2) SicatEndo (SE) with subtractive CAD/CAM-manufactured templates. Postoperative CBCT and virtual planning data were superimposed for analysis. Accuracy was assessed by measuring the discrepancies between planned and prepared cavities at the tip of the bur (three spatial dimensions, 3D vector, angle). Virtual planning effort was defined as the time and number of computer clicks. A 95% confidence interval (CI) was computed for each sample . Results: SE successfully located root canals for GEA in 16/16 cases (100%) and CDX in 15/16 cases (94%). SE resulted in less mean deviation at the tip of the bur with regard to distance in the labial-oral direction (0.12 mm), 3D vector (0.35 mm), and angle (0.68 degrees) compared with CDX (0.54 mm, 0.74 mm, 1.57 degrees, respectively; P < 0.001). CDX required less mean planning time and effort for each four-tooth arch (10 min 50 s, 107 clicks) than SE (20 min 28 s, 341 clicks; P < 0.05). Conclusions: Both methods enabled rapid drill path planning, a predictable GEA procedure, and the reliable location of root canals in teeth with PCO without perforation. KW - Wurzelkanalbehandlung KW - 3D-Druck KW - Wurzelkanalobliteration KW - schablonengeführte Trepanation KW - 3D Druck Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-206875 ER - TY - JOUR A1 - Manchia, Mirko A1 - Adli, Mazda A1 - Akula, Nirmala A1 - Arda, Raffaella A1 - Aubry, Jean-Michel A1 - Backlund, Lena A1 - Banzato, Claudio E. M. A1 - Baune, Bernhard T. A1 - Bellivier, Frank A1 - Bengesser, Susanne A1 - Biernacka, Joanna M. A1 - Brichant-Petitjean, Clara A1 - Bui, Elise A1 - Calkin, Cynthia V. A1 - Cheng, Andrew Tai Ann A1 - Chillotti, Caterina A1 - Cichon, Sven A1 - Clark, Scott A1 - Czerski, Piotr M. A1 - Dantas, Clarissa A1 - Del Zompo, Maria A1 - DePaulo, J. Raymond A1 - Detera-Wadleigh, Sevilla D. A1 - Etain, Bruno A1 - Falkai, Peter A1 - Frisén, Louise A1 - Frye, Mark A. A1 - Fullerton, Jan A1 - Gard, Sébastien A1 - Garnham, Julie A1 - Goes, Fernando S. A1 - Grof, Paul A1 - Gruber, Oliver A1 - Hashimoto, Ryota A1 - Hauser, Joanna A1 - Heilbronner, Urs A1 - Hoban, Rebecca A1 - Hou, Liping A1 - Jamain, Stéphane A1 - Kahn, Jean-Pierre A1 - Kassem, Layla A1 - Kato, Tadafumi A1 - Kelsoe, John R. A1 - Kittel-Schneider, Sarah A1 - Kliwicki, Sebastian A1 - Kuo, Po-Hsiu A1 - Kusumi, Ichiro A1 - Laje, Gonzalo A1 - Lavebratt, Catharina A1 - Leboyer, Marion A1 - Leckband, Susan G. A1 - López Jaramillo, Carlos A. A1 - Maj, Mario A1 - Malafosse, Alain A1 - Martinsson, Lina A1 - Masui, Takuya A1 - Mitchell, Philip B. A1 - Mondimore, Frank A1 - Monteleone, Palmiero A1 - Nallet, Audrey A1 - Neuner, Maria A1 - Novák, Tomás A1 - O'Donovan, Claire A1 - Ösby, Urban A1 - Ozaki, Norio A1 - Perlis, Roy H. A1 - Pfennig, Andrea A1 - Potash, James B. A1 - Reich-Erkelenz, Daniela A1 - Reif, Andreas A1 - Reininghaus, Eva A1 - Richardson, Sara A1 - Rouleau, Guy A. A1 - Rybakowski, Janusz K. A1 - Schalling, Martin A1 - Schofield, Peter R. A1 - Schubert, Oliver K. A1 - Schweizer, Barbara A1 - Seemüller, Florian A1 - Grigoroiu-Serbanescu, Maria A1 - Severino, Giovanni A1 - Seymour, Lisa R. A1 - Slaney, Claire A1 - Smoller, Jordan W. A1 - Squassina, Alessio A1 - Stamm, Thomas A1 - Steele, Jo A1 - Stopkova, Pavla A1 - Tighe, Sarah K. A1 - Tortorella, Alfonso A1 - Turecki, Gustavo A1 - Wray, Naomi R. A1 - Wright, Adam A1 - Zandi, Peter P. A1 - Zilles, David A1 - Bauer, Michael A1 - Rietschel, Marcella A1 - McMahon, Francis J. A1 - Schulze, Thomas G. A1 - Alda, Martin T1 - Assessment of Response to Lithium Maintenance Treatment in Bipolar Disorder: A Consortium on Lithium Genetics (ConLiGen) Report JF - PLoS ONE N2 - Objective: The assessment of response to lithium maintenance treatment in bipolar disorder (BD) is complicated by variable length of treatment, unpredictable clinical course, and often inconsistent compliance. Prospective and retrospective methods of assessment of lithium response have been proposed in the literature. In this study we report the key phenotypic measures of the "Retrospective Criteria of Long-Term Treatment Response in Research Subjects with Bipolar Disorder" scale currently used in the Consortium on Lithium Genetics (ConLiGen) study. Materials and Methods: Twenty-nine ConLiGen sites took part in a two-stage case-vignette rating procedure to examine inter-rater agreement [Kappa (\(\kappa\))] and reliability [intra-class correlation coefficient (ICC)] of lithium response. Annotated first-round vignettes and rating guidelines were circulated to expert research clinicians for training purposes between the two stages. Further, we analyzed the distributional properties of the treatment response scores available for 1,308 patients using mixture modeling. Results: Substantial and moderate agreement was shown across sites in the first and second sets of vignettes (\(\kappa\) = 0.66 and \(\kappa\) = 0.54, respectively), without significant improvement from training. However, definition of response using the A score as a quantitative trait and selecting cases with B criteria of 4 or less showed an improvement between the two stages (\(ICC_1 = 0.71\) and \(ICC_2 = 0.75\), respectively). Mixture modeling of score distribution indicated three subpopulations (full responders, partial responders, non responders). Conclusions: We identified two definitions of lithium response, one dichotomous and the other continuous, with moderate to substantial inter-rater agreement and reliability. Accurate phenotypic measurement of lithium response is crucial for the ongoing ConLiGen pharmacogenomic study. KW - age KW - observer agreement KW - prophylactic lithium KW - mapping susceptibility genes KW - mood disorders KW - onset KW - association KW - reliability KW - morality KW - illness Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130938 VL - 8 IS - 6 ER -