TY - THES A1 - Hügel, Markus T1 - The control of nanomorphology in star-shaped mesogens T1 - Die Steuerung der Nanomorphologie von sternförmigen Mesogenen N2 - Stilbene-based star-shaped mesogens have been synthesized with and without fullerene guests. Thermotropic properties and the mechanism of space-filling in the mesophases of these systems have been examined. N2 - Auf Stilben basierende sternförmige Mesogene wurden mit als auch ohne Fullerengäste synthetisiert. Die thermotropen Eigenschaften und der Mechanismus der Raumfüllung in den Mesophasen dieser Systeme wurden untersucht. KW - Flüssigkristall KW - Fullerene KW - Porphyrin KW - Mesogen KW - Raumfüllung KW - Dyade KW - Nanosegregation KW - Fulleren-Netzwerk KW - Mesogen KW - Space filling KW - Dyad KW - Nanosegregation KW - fullerene network KW - Hekate Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-165321 ER - TY - THES A1 - Schweeberg, Sarah T1 - Biomedizinische Anwendung von Nanodiamant: Untersuchungen zu den Wechselwirkungen mit der biologischen Umgebung und zur gezielten Wirkstofffreisetzung T1 - Biomedical applications of nanodiamond: Examinations of the interactions with the biological environment and controlled drug release N2 - Nanodiamant bietet in der Medizin und in der Biologie zahlreiche Anwendungsmöglichkeiten aufgrund der guten Biokompatibilität und geringen Toxizität. Durch die umfangreichen Funktionalisierungsmöglichkeiten der Oberfläche der nanometergroßen Partikel können viele unterschiedliche Wirkstoffe, Rezeptormoleküle oder Peptidsequenzen angebunden werden ,die zusammen mit Nanodiamant ein anderes, durchaus besseres Wirkprofil aufweisen als der Wirkstoff allein. Ziel dieser Arbeit war die Synthese eines pH-labilen Linkersystems, dass hydroxylhaltige Wirkstoffe kovalent bindet und zusammen mit Nanodiamant in die Zelle, in der ein saurer pH-Wert herrscht, eingeschleust werden. Über die Änderung des pH-Wertes in der Zelle soll der Wirkstoff freigesetzt werden und seine Wirkung entfalten können. Weiterhin wurde ein pH-labiles Linkersystem auf der Basis eines Hydrazons hergestellt. Über das synthetisierte Hydrazinderivat können Wirkstoffe, die über eine Aldehyd- oder Ketonfunktion verfügen angebunden werden und pH-labil in der Zelle freigesetzt werden. Zusätzlich trägt der Nanodiamant ein kovalent angebundenes Targeting-Molekül, welches eine verbesserte Adressierung der Wirkorte gewähr¬leisten soll. Die Freisetzung wurde mittels UV-Vis-Spektroskopie detektiert und ausgewertet. Neben der spezifischen Funktionalisierung von Nanodiamant besitzt auch die Interaktion der Nanodiamantpartikel mit biologischen Medien eine besondere Bedeutung für zukünftige biomedizinische Anwendungen. Wenn die Partikeloberfläche durch Proteinadsorption gegenüber dem Wirkort abgeschirmt wird, so kann der angebundene Wirkstoff gegebenenfalls nicht freigesetzt werden und somit nicht seine Wirkung entfalten und bleibt letztlich ungenutzt. So war es von besonderem Interesse die Wechselwirkungen von Nanodiamant in Humanserum und auch weiteren physiologischen Medien zu untersuchen. Dabei wurden sowohl freie Nanodiamantpartikel als auch solche, die auf klinisch bereits eingesetzten Gerüstmaterialien im Bereich der Therapie großer Knochendefekte adsorbiert waren, untersucht. Auch wurden die Wechselwirkungen von Nanodiamant mit der physiologischen Umgebung untersucht, die zur Agglomeration der Nanopartikel führen können. Es wurde ein unter¬schiedliches Agglomerationsverhalten der Nanodiamanten in wässriger Umgebung verglichen mit Nanodiamanten in physiologischen Medien sowie deren Stabilität im Serum beobachtet. Durch die in dieser Arbeit vorgestellten Untersuchungen konnten wichtige Erkenntnisse zur Wechselwirkung verschieden präparierter und funktionalisierter Nanodiamanten mit physiologisch relevanten Umgebungen sowie zu stimuli-responsiven Wirkstofffreisetzung aus Nanodiamant-Konjugaten gewonnen werden. Zudem wurde mit der Untersuchung der angelagerten Proteine um Nanodiamant ein erster Schritt in Richtung eines umfassenden Verständnisses der Wechselwirkung dieses Materials mit biologischen Umgebungen unternommen. Auch wenn diese Wechselwirkungen sehr komplex sind, so sind erste Aussagen bezüglich der Art der angelagerten Proteine möglich. Erste Versuche der Stabilisierung von Nanodiamant in physiologischen Medien wurden ebenfalls erfolgreich durchgeführt und zeigen eine effiziente und einfache Möglichkeit, Nanodiamant in biologischen Medien vor der Agglomeration zu bewahren. Die im Rahmen dieser Arbeit gewonnen Erkenntnisse bezüglich mehrfacher Funktionalisierungsmöglichkeiten von Nanodiamant sowie dessen Stabilisierung in physiologischen Medien zeigen die breite Anwendungsmöglichkeit und das enorme Potential von Nanodiamant im Bereich medizinischer und biologischer Anwendungen auf. N2 - Nanodiamond offers various possible applications in medicine and biology because of its good biocompatibility and low toxicity. Due to the extensive opportunities functionalizing the surface of the nanosized particles it is possible to bind a lot of different active pharmaceutical ingredients (API), receptor molecules or peptide sequences. This functionalization can result in an improved efficacy compared to the profile of the drug alone. The aim of this thesis was the synthesis of a pH-labile linkersystem which covalently binds hydroxyl group-containing APIs and transfer them together with nanodiamond into the cells, where an acidic environment is predominant. Because of the change of the pH-value the drug gets released and can take its effect. Furthermore, a pH-labile linkersystem based on the formation of a hydrazon bond was synthesized. APIs containing an aldehyde or a ketone can be linked to the synthesized hydrazine derivative 70 and be released in cells due to the acid-labile bond. Additionally, the nanodiamond has a covalently bound targeting molecule to assure an improved uptake into the cell. The release of Doxorubicin was detected and evaluated via UV-Vis-spectroscopy. Besides the specific functionalization, the interaction of nanodiamond particles with biological media is gaining more and more importance regarding future biomedical applications. If the particle surface is shielded with proteins it is possible that the linked drug cannot be released, remains unused and cannot develop its desired effect. Because of this reason it was of main interest to examine the interactions of nanodiamond in human serum and further physiological media. Nanodiamond without further functionalization were analysed as well as nanodiamonds which are adsorbed on materials that are already in clinical usage in the field of greater bone defects. The interactions of nanodiamond with a physiological environment which can lead to the agglomeration of the particles was also examined. A different agglomeration bahaviour of nanodiamond in aqueous media was compared to nanodiamond in physiological media as well as their stability in serum. Due to the presented studies in this thesis important insights into the interactions of functionalized and different prepared nanodiamonds with physiological relevant environments as well as with stimuli-responsive drug release from nanodiamond conjugates were obtained. Furthermore, the examinations of the attached proteins around nanodiamond is the first step getting towards a better comprehensive understanding of the interactions of this material with its biological environment. Even if these interactions are very complex, first statements according to the type of attached proteins are possible. First trials of stabilizing nanodiamond in physiological media have been carried out successfully and demonstrate an easy and effective way to hinder agglomeration of nanodiamond in biological media. Finally, the insights gained in this thesis regarding the multiple possibilities of nanodiamond as well as their stabilization in physiological media offers a broad range of applications and the tremendous potential of nanodiamond in the field of medical and biological research. KW - Nanopartikel KW - nanodiamond KW - Wirkstofffreisetzung KW - drug release KW - Diamant KW - Wirkstofffreisetzung KW - Nanodiamant Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-174619 ER - TY - THES A1 - Wachtler, Stefan T1 - Synthese und Charakterisierung von funktionalisierten Nanodiamantmaterialien für biomedizinische Anwendungen T1 - Synthesis and characterization of functionalized nanodiamond particles for biomedical applications N2 - In dieser Arbeit ist die Synthese von funktionalisiertem Nanodiamant mit bioaktiven Substanzen, welche vor allem als Wirkstofftransporter eingesetzt werden sollen, beschrieben. Dazu werden zum einen bereits bekannte Anbindungsmöglichkeiten an Nanodiamant, wie zum Beispiel die Klick-Reaktion, sowie die Ausbildung von Amidbrücken verwendet. Zum anderen werden neuartige Funktionalisierungsmöglichkeiten wie Protein Ligation und Thioharnstoffbrücken verwendet und somit das Repertoire an bekannten Anbindungsreaktion erweitert. Des weiteren wurde ein multifunktionales Nanodiamantsystem synthetisiert. Dieses ist in der Lage, zwei verschiedene Moleküle auf einem Partikel zu immobilisieren. Die verwendeten Methoden ermöglichen die Anbindung verschiedener Substanzen aus unterschiedlichen Molekülgruppen an Nanodiamanten und sind somit universell einsetzbar. N2 - Because of its unique physical and chemical properties, nanodiamond can be used in a variety of scientific fields, such as in medical and biological research. In this thesis, new ways to covalently bind substances to the nanodiamond surface have been explored, which also can be used in biological systems. ... KW - Synthesediamant KW - Funktionalisierung KW - Fluoreszenz KW - Krebs KW - nanodiamond KW - Nanodiamant Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-210757 ER - TY - THES A1 - Seifert, Sabine T1 - New Electron-Deficient Polycyclic Aromatic Dicarboximides by Palladium-Catalyzed C–C Coupling and Core Halogenation–Cyanation T1 - Neue elektronenarme polyzyklische aromatische Dicarboximide durch Palladium-katalysierte C–C-Kupplung und Kernhalogenierung–Cyanierung N2 - The thesis describes the development of new synthetic strategies towards planar nanometer-sized and electron-deficient polycyclic aromatic dicarboximides, which are rather unexplored compared with the large variety of electron-rich polycyclic aromatic hydrocarbons and nanographenes. Thus, new polycyclic aromatic systems containing a different number of dicarboximide groups were designed since this class of compounds has revealed its significance in the past due to a range of desirable molecular properties and its high thermal and photochemical stability. The synthetic concept towards these systems includes different C–C coupling techniques that were combined within coupling cascade reactions. Therefore, this thesis provides new insights into the reactivity of aromatic substrates and elucidates mechanistic aspects of C–C coupling cascade reactions to facilitate the precise design of new and desirable materials based on polycyclic aromatic dicarboximides. Furthermore, structure-property relationships as well as the optical and electrochemical properties were investigated by UV/Vis absorption and fluorescence spectroscopy and cyclic or square wave voltammetry. Insights into the molecular structures in the solid state were obtained by single-crystal X-ray analysis. In subsequent studies, highly electron-deficient perylene bisimides and their reduced species have been investigated in detail. Thus, core-functionalized perylene bisimides were synthesized and UV/Vis absorption spectroscopy, spectroelectrochemistry and cyclic or square wave voltammetry were used to determine their optical properties and the stability of the individual reduced species. N2 - Die vorliegende Arbeit beschreibt die Entwicklung neuer Synthesestrategien für planare und elektronenarme polyzyklische aromatische Dicarboximide in der Größenskala weniger Nanometer, welche im Vergleich zu der Vielzahl an elektronenreichen polyzyklischen aromatischen Kohlenwasserstoffen und Nanographenen weitaus weniger erforscht sind. Daher wurden neue polyzyklische aromatische Systeme entworfen, welche eine unterschiedliche Anzahl von Dicarboximid-Einheiten enthalten, da diese Klasse von Verbindungen ihre Bedeutsamkeit in der Vergangenheit aufgrund einer Reihe vorteilhafter molekularer Eigenschaften und ihrer hohen thermischen und photochemischen Stabilität gezeigt hat. Das synthetische Konzept für diese Systeme umfasst dabei verschiedene C–C-Knüpfungstechniken, die zu Kaskadenreaktionen kombiniert wurden. Daher werden in dieser Arbeit neue Einblicke in die Reaktivität von aromatischen Substraten aufgezeigt und mechanistische Aspekte von C–C-Kupplungskaskadenreaktionen erläutert, um eine präzise Gestaltung neuer und erstrebenswerter Materialien auf der Basis von polyzyklischen aromatischen Dicarboximiden zu erleichtern. Darüber hinaus wurden Struktur-Eigenschafts-Beziehungen sowie die optischen und elektrochemischen Eigenschaften durch UV/Vis-Absorptions- und Fluoreszenzspektroskopie sowie Cyclo- oder Square Wave Voltammetrie untersucht. Einblicke in die molekularen Strukturen im Festkörper wurden durch Einkristallstrukturanalyse erhalten. In nachfolgenden Studien wurden stark elektronenarme Perylenbisimide und ihre reduzierten Spezies detailliert untersucht. Dazu wurden kernfunktionalisierte Perylenbisimide synthetisiert. Um deren optische Eigenschaften und die Stabilität der reduzierten Spezies zu bestimmen wurden UV/Vis-Absorptionsspektroskopie, Spektroelektrochemie und Cyclo- oder Square Wave Voltammetrie verwendet. KW - Kupplungsreaktion KW - Dicarboximide KW - Polycyclische Aromaten KW - C-C coupling KW - Dicarboximides KW - Polycyclic aromatic hydrocarbons Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-156200 ER - TY - THES A1 - Sowik, Thomas T1 - Assessment of the surface functionalization of SPION and DND nanomaterials for cellular uptake and fluorescence imaging T1 - Abschätzung der Oberflächenfunktionalisierung von SPION und DND Nanomaterialien für die Zellaufnahme und Fluoreszenzimaging N2 - The aim of this work was to synthesize and functionalize different bio-relevant nanomaterials like silica-coated superparamagnetic iron oxide nanoparticles (SPIONs) as contrast agents for T2 magnetic resonance imaging (MRI) and detonation nanodiamond (DND) with the neurohormone peptide allatostatin 1 (ALST1) and a fluorescent dye. Analytical techniques for the determination and quantification of surface functional groups like amines, azides, and peptides were also developed and established. Thus, in the first part of the work, a TGF-1 binding peptide and allatostatin 1 (ALST1), both supposed to act as active tumour targeting vectors, were synthesized by solid-phase peptide synthesis (SPPS) and characterized by high pressure liquid chromatography (HPLC) and mass spectrometry. Then, azide-functionalized silica nanoparticles were synthesized by the Stöber process and characterized by transmission electron microscopy (TEM) and infrared spectroscopy (IR). The surface loading of amine and azide groups was determined by a new protocol. The azide groups were reduced with sodium boronhydride to amine and then functionalized with Fmoc-Rink Amide linker according to a standard SPPS protocol. Upon cleavage of Fmoc by piperidine, the resulting dibenzofulvene and its piperidine adduct were quantified by UV/Vis spectroscopy and used to determine the amount of amine groups on the nanoparticle surface. Then, ALST1 and related tyrosine- and phenylalanine substituted model peptides were conjugated to the azide-functionalized silica nanoparticles by copper(I)-catalyzed azide-alkyne dipolar cycloaddition (CuAAC). The successful peptide conjugation was demonstrated by the Pauly reaction, which however is only sensitive to histidine- and tyrosine-containing peptides. As a more general alternative, the acid hydrolysis of the peptides to their individual amino acid building blocks followed by derivatization with phenyl isothiocyanate (PITC) allowed the separation, determination, and quantification of the constituent amino acids by HPLC. In the second part of the work, amine- and azide-functionalized silica-coated superparamagnetic iron oxide nanoparticles (SPIONs) were synthesized by co-precipitation and subsequent silica-coated based on the Stöber process and characterized by TEM and IR. The amine surface loading was determined by the method already established for the pure silica systems. The azide surface loading could also be quantified by reduction with sodium boronhydride to amine groups and then conjugation to Fmoc-Rink amide linker. Upon cleavage of Fmoc with piperidine, the total amine surface loading was obtained. The amount of azide surface groups was then determined from the difference of the total amine surface loading and the amine surface loading. Thus, it was possible to quantify both amine and azide surface groups on a single nanoparticle system. Superparamagnetic iron oxide nanoparticles (SPIONs) are potent T2 contrast agents for magnetic resonance imaging (MRI). Due to their natural metabolism after injection into the blood stream, SPIONs mostly end up inside macrophages, liver, spleen or kidneys. To generate a potential target-specific SPION-based T2 contrast agent for MRI, the neurohormone peptide ALST1 was conjugated by CuAAC to the azide- and amine functionalized superparamagnetic iron oxide nanoparticles, since ALST1 is supposed to target difficult-to-treat neuroendocrinic tumours due to its analogy to galanin and somastatin receptor ligands. The organic fluorescent dye cyanine 5 (Cy5) was also conjugated to the silica-coated superparamagnetic iron oxide nanoparticles (SPIONs) via a NHS-ester to the amines to enable cell uptake studies by fluorescence microscopy. These constructs were characterized by TEM, dynamic light scattering (DLS), and IR. The amino acids of the conjugated ALST1 were determined by the HPLC method as described before for peptide-modified silica nanoparticle surfaces. Then, the relaxivity r2 was measured at 7 T. However, a r2 value of 27 L/mmolFe·s for the dual ALST1-/Cy5-functionalized silica-coated SPIONs was not comparable to T2 contrast agents in clinical use, since their relaxivity is commonly determined at 1.5 T, and no such instrument was available. However, it can be assumed that the synthesized dual ALST1-/Cy5-functionalized silica-coated SPION would show a lower r2 at 1.5 T than at 7T. Commercial T2 MRI contrast agents like VSOP-C184 from Ferropharm show at r2 values of about 30 L/mmolFe·s at 1.5 T. Still, the relaxivity of the new material has some potential for application as a T2 contrast agent. Then, the material was used in cell uptake studies by fluorescence microscopy with the conjugated Cy5 dye as a probe. The dual ALST1-/Cy5-functionalized silica-coated SPION showed a high degree of agglomeration with no cellular uptake unlike described for ALST1-functionalized nanoparticles in literature. It is assumed that upon agglomeration of the particles, constructs form which are unable to be internalized by the cellular endocytotic pathways anymore. As a future perspective, the tendency of the particle to agglomerate should be reduced by changing the coating material to polyethylene glycol (PEG) or chitosan, which are known to be bio-compatible, bio-degradable and prevent agglomeration. In the third part of the work, the rhenium compound [ReBr(CO)3(L)] with L = 2-phenyl-1H-imidazo[4,5-f][1,10]phenanthroline and its manganese analogue were synthesized by heating the ligand and rhenium pentacarbonyl bromide or and manganese pentacarbonyl bromide respectively, in toluene. However, [MnBr(CO)3(L)] was unstable upon illumination by UV light at 365 nm. Thus, it was dismissed for further application. The photophysical properties of [ReBr(CO)3(L)] were explored, by determination of the excited-state life time by the time-correlated single-photon counting (TCSPC) method and the quantum yield by a fluorescence spectrometer equipped with an integration sphere. A value of  = 455 ns, a Stokes shift of 197 nm and a rather low quantum yield =were found. Metal complexes are supposed to have superior properties compared to organic dyes due to their large Stokes shifts, long excited-state life times, and high quantum yields. Thus, amine- and azide-functionalized detonation nanodiamond (DND) as an alternative biological inert carrier system was functionalized with ALST1 to enhance its cell uptake properties. A luminescent probe for cell uptake studies using fluorescence microscopy was also attached, either based on the new rhenium complex or the commercially available organic dye Cy5, respectively. The aldehyde-functionalized rhenium complex was conjugated to the DND via oxime ligation, which is known to be a mild and catalyst-free conjugation method. The amount of peptide ALST1 on the DND was analyzed and quantified after acid hydrolysis and PITC derivatization by HPLC as described before. Then, the ALST1-/luminescent probe-functionalized DND was investigated for its photophysical properties by fluorescence spectroscopy. The Cy5-functionalized material showed a slightly lower fluorescence performance in aqueous solution than reported in literature and commercial suppliers with a life time  < 0.4 ns and quantum yields not determinable by integration sphere due to the week signal intensity. The rhenium complex-functionalized material had a very low signal intensity in only aqueous medium, and thus determination of life times and quantum yield by fluorescence spectroscopy was not possible. After incubation with MDA-MB 231 cells, the Cy5-functionalized DND could easily be detected due to its red fluorescence. However, it was not possible to visualize the rhenium complex-functionalized DND with fluorescence microscopy due to the low fluorescence intensity of the complex in aqueous medium and the lack of proper filters for the fluorescence microscope. Cy5-functionalized DND did not show any cellular uptake in fluorescence microscopy after conjugation with ALST1. Since the nanodiamond surface is known to strongly adsorb peptides and proteins, it is assumed that the peptide chain is oriented perpendicular to the nanoparticle surface and thus not able to interact with cell membrane receptors to promote cell uptake of the particles. As a future perspective, the ALST1-promoted cellular uptake of the DND should be improved by using different linker systems for peptide conjugation to prevent adsorption of the peptide chain on the particle surface. The new analytical methods for amino-, azide-, and peptide-functionalized nanoparticles have great potential to assist in the quantification of nanoparticle surface modifications by UV/Vis spectroscopy and HPLC. The determination of surface amine and azide groups based on the cleavage of conjugated Fmoc-Rink amide linker and detected by UV/Vis spectroscopy is applicable to all amine-/azide-functionalized nanomaterials. However, particles which form very stable suspension with the cleavage mixture can cause quantification problems due to scattering, making an accurate quantification of dibenzofulvene and its piperidine adduct impossible. The detection of tyrosine- and histidine-containing peptides based on the Pauly reaction is well-suited as a fast and easy-to-perform qualitative demonstration of successful peptide surface conjugation. However, its major drawback as a colourimetric approach is that coloured particles cannot be evaluated by this method. The amino acid analysis based on HPLC after acid hydrolysis of peptides conjugated to nanoparticle surfaces to its individual building blocks and subsequent derivatization with PITC, can be used on all nanomaterials with peptide or protein surface modification. It allows detection of amino acids down to picomolar concentrations and even enables analysis of very small peptide surface loadings. However, the resulting HPLC traces are difficult to analyze. Three new analytical methods based on UV/Vis and HPLC techniques have been developed and established. They assisted in the characterization of the synthesized DND and SPIONs with dual functionalization by ALST1 and Cy5 or [ReBr(CO)3(L)], respectively. However, the nanomaterials showed no cellular uptake due to a high tendency to agglomerate. The cellular uptake should be improved and the tendency to agglomerate of the SPIONs should be reduced by changing the surface coating from silica to either PEG or chitosan. Furthermore, different linker systems for connecting peptides to DND surfaces should be synthesized and evaluated to reduce potential peptide chain adsorption. N2 - Das Ziel dieser Arbeit war die Synthese und Funktionalisierung biologisch relevanter Nanomaterialien wie die Silica-umhüllten superparamagnetischen Eisenoxid Nanopartikel (SPIONs) als Kontrastmittel für T2 gewichtete Magnetresonanztomographie (MRT) und Detonantionsnanodiamant mit dem Neurohormonpeptid Allatostatin 1 (ALST1) sowie einem Fluoreszenzfarbstoff. Des Weiteren sollten analytische Methoden zur Bestimmung und Quantifizierung von funktionellen Oberflächenmodifikationen wie Amine, Azide und Peptide entwickelt und etabliert werden. Aus diesem Grund wurden im ersten Teil der Arbeit ein TGF-1 bindendes Peptid und Allatostatin 1 (ALST1), welche beide spezifisch Tumorgewebe anzielen, mit Hilfe der Festphasen Peptid Synthese (SPPS) hergestellt und durch HPLC und Massenspektrometrie charakterisiert. Danach wurden Azid-funktionalisierte Silica-Partikel durch den Stöber Prozess hergestellt und mit Hilfe von Transmissionselektronenmikroskopie (TEM) und Infrarot Spektroskopie (IR) charakterisiert. Die Oberflächenbeladung von Aminen und Aziden wurde mit einer neuen Methode bestimmt. Azidgruppen wurden mit Natriumborhydrid zu Aminen reduziert und anschließend mit dem Fmoc-Rink Amid Linker unter Verwendung des allgemeinen SPPS Verfahrens. Durch die Abspaltung von Fmoc mit Piperidin wurden Dibenzofulven und sein Piperidin-Adduct gebildet und mit Hilfe von UV/Vis Spektroskopie quantifiziert um die Oberflächenbeladung der Amino-Gruppen auf den Nanopartikeln zu bestimmen. Danach wurden ALST1 und verwandte Tyrosin- und Phenylalanin- substituierte Modellpeptide synthetisiert und durch die Kuper(I)-katalysierte Azid-Alkin dipolare Cycloaddition (CuAAC) an die Oberfläche der Silica-Partikel konjugiert. Die erfolgreiche Peptidkonjugation wurde mit Hilfe der Pauly Reaktion, welche jedoch ausschließlich auf Tyrosin- und Histidin-haltige Peptide und Proteine anwendbar ist, nachgewiesen. Als eine universellere Alternative wurden die Peptid-konjugierten Nanomaterialien mit konzentrierter Salzsäure hydrolysiert und anschließend mit Phenylisothiocyanat (PITC) derivatisiert, was die Trennung, Bestimmung und Quantifikation der individuellen Aminosäuren des Peptids durch HPLC ermöglichte. In dem zweiten Teil dieser Arbeit wurden Amin- und Azid-funktionalisierte Silica-umhüllte superparamagnetische Eisenoxidnanopartikel (SPIONs) durch Co-Präzipitation und anschließender Silica-Ummantelung basierend auf dem Stöber Prozess synthetisiert und mit Hilfe von TEM und IR charakterisiert. Die Oberflächenbeladung der Aminogruppen wurde an Hand der bereits etablierten Methode für Silica-Partikel bestimmt. Die Oberflächenbeladung der Azidgruppen wurde quantifiziert durch deren Reduktion mit Natriumborhydrid zu Aminogruppen und der darauf folgenden Verknüpfung mit dem Fmoc-Rink Amid Linker. Durch die Abspaltung des Fmoc mit Piperidin und dessen Quantifizierung durch UV/Vis Spektroskopie wurde so die gesamte Aminogruppen Oberflächenbeladung erhalten. Die Oberflächenbeladung mit Azidgruppen wurde dann durch die Differenz aus gesamter Amin- und tatsächlicher Amin-Oberflächenbeladung berechnet. Auf diese Weise war es möglich die Oberflächenbeladung sowohl von Aminen, als auch von Aziden an nur einem einzigen Nanopartikelsystem zu bestimmen. SPIONs können als Kontrastmittel für T2-gewichtete MRT Messungen verwendet werden. Jedoch werden sie auf Grund ihres Metabolismus nach der Injektion ins Blutsystem von Makrophagen, Leber, Milz und Niere aufgenommen. Um ein potentielles, gewebespezifisches SPION-basiertes Kontrastmittel für T2-gewichtete MRT Messungen zu erzeugen wurde das Neurohormonpeptid ALST1 mit Hilfe der CuAAC an die Azid-/Amin-funktionalisierten Silica-ummantelten SPIONs konjugiert, da von ALST1 eine Spezifität auf schwierig zu behandelnde neuroendokrine Tumore vermutet wird, auf Grund seiner Ähnlichkeit zu Galanin und Somastatin Rezeptorliganden. Der organische Fluoreszenzfarbstoff Cyanin 5 (Cy5) wurde ebenfalls an den Azid-/Amin-funktionalisierten Silica-ummantelten SPIONs über einen NHS-Ester konjugiert um Zellaufnahmestudien mit Hilfe von Fluoreszenzmikroskopie zu ermöglichen. Diese Materialien wurden mit TEM, dynamischer Lichtstreuung (DLS) und IR charakterisiert. Die Aminosäuren des konjugierten ALST1 wurden an Hand der bereits für Silica-Partikel beschriebenen HPLC-Methode bestimmt. Danach wurde die Relaxivität r2 bei 7 T gemessen. Leider sind der gemessene Wert von 27 L/mmolFe·s für das duale System ALST1-/Cy5-functionaliserte Silica-ummantelte SPIONs nicht mit klinisch verwendete T2 Kontrastmittel zu vergleichen, da diese bei einer Feldstärke von 1.5 T verwendet werden. Es ist jedoch anzunehmen, dass das synthetisierte Nanopartikelsystem bei 1.5 T eine geringere Relaxivität r2 zeigen würde als bei 7 T. Jedoch zeigen kommerzielle Kontrastmittel für T2-gewichtete MRT Messungen wie zum Beispiel VSOP-C184 von Ferropharm r2 Werte um die 30 L/mmolFe·s. Von daher hat das neue Material durchaus Potential als Kontrastmittel für T2-gewichtete MRT Messungen. Danach wurde das Material auf seine Zellaufnahme mit Hilfe von Fluoreszenzmikroskopie unter Verwendung des konjugierten Cy5 als Sonde untersucht. Die dualen ALST1-/Cy5-functionaliserte Silica-ummantelte SPIONs wurden mit MDA-MB 231 Zellen inkubiert, zeigten jedoch einen hohen Grad an Agglomeration, wobei große Konstrukte gebildet wurden die nicht mehr durch die zellularen Endozytosewege internalisiert werden konnten. Für weitere Anwendungen muss die Tendenz der Partikel zur Agglomeration verringert werden. Dies kann durch einen Wechsel der Hülle von Silica zu Polyethylenglykol (PEG) oder Chitosan erreicht werden, welche dafür bekannt sind Agglomeration zu verhindern als auch biologisch kompatibel, abbaubar zu sein. Im dritten Teil der Arbeit wurde die Rheniumverbindung [ReBr(CO)3(L)] mit L = 2-Phenyl-1H-imidazo[4,5-f][1,10]phenanthrolin und ihr Mangan-Analogon synthetisiert durch Erhitzen des Liganden und Bromopentacarbonylrhenium, beziehungsweise Bromopentacarbonyl-mangan, in Toluol. Der Komplex [MnBr(CO)3(L)] wurde jedoch wegen seiner Instabilität bei Belichtung mit UV-Licht der Wellenlänge 365 nm für weitere Anwendungen verworfen. Die photophysikalischen Eigenschaften von [ReBr(CO)3(L)] wurden untersucht durch die Bestimmung der Lebenszeit des angeregten Zustandes mit der time-correlated single-photon counting (TCSPC) Methode und die Quantenausbeute mit Hilfe eines Fluoreszenzspektrometers welches mit einer Integrationsphäre ausgerüstet war. Ein Wert von  = 455 ns, einem Stokes shift von 197 nm und eine eher niedrige Quantenausbeute  = 0.05 wurden ermittelt. Es wird behauptet, dass Metallkomplexe den organischen Fluoreszenzfarbstoffen überlegende Stokes shifts, Lebenszeiten des angeregten Zustandes sowie Quantenausbeuten haben. Aus diesem Grund wurde der Amino- und Azid-funktionalisierte DND mit ALST1, auf Grund seiner Eigenschaft die Zellaufnahme zu verstärken, funktionalisiert. Des Weiteren wurde eine Fluoreszenzsonde für Zellaufnahmestudien unter Verwendung von Fluoreszenzmikroskopie und die Partikeloberfläche konjugiert, welche entweder auf [ReBr(CO)3(L)] oder Cy5 basierten. Die Aldehyd-funktionalisierte Rheniumverbindung wurde über die Oxime Ligation an den Nanopartikel konjugiert, welche als milde und Katalysator-freie Konjugationsmethode bekannt ist. Die Menge des Peptids ALST1 auf der DND Oberfläche wurde durch HPLC nach saurer Hydrolyse und Derivatisierung mit PITC wie zuvor beschrieben analysiert und quantifiziert. Danach wurden die dualen ALST1-/Lumineszenzsonde-funktionalisierten DND in Bezug auf ihre photophysikalischen Eigenschaften mit Hilfe der Fluoreszenzspektroskopie untersucht. Das Cy5-funktionaliserte Material zeigte in wässrigem Medium etwas geringere Lebenszeit des angeregten Zustandes mit  < 0.4 ns als in der Literatur beschrieben und eine nicht bestimmbare Quantenausbeute durch die Integrationssphäre auf Grund der schwachen Emissionsintensität. Das [ReBr(CO)3(L)]-funktionalisierte Material zeigte eine sehr geringe Emissionsintensität in wässrigen Medium, welche es unmöglich machte die Lebenszeit des angeregten Zustandes und die Quantenausbeute zu bestimmen. Es war nicht möglich das Rhenium Komplex-funktionalisierte Material auf Grund seiner geringen Emissionsintensität in der Fluoreszenzmikroskopie nach Inkubation mit MDA-MB 231 Zellen zu visualisieren. Nach der Inkubation des Cy5-functionalisierten DND mit MDA-MB 231 Zellen, konnte das Material sehr gut auf Grund seiner roten Fluoreszenz identifiziert werden. Jedoch zeigte es keine Internalisierung in die Zellen nach Konjugation mit ALST1. Es wird vermutet dass die Peptidkette flach auf die Nanodiamantoberfläche, welche für ihre starke, nicht-kovalente Interaktion mit Proteinen und Peptiden bekannt ist, adsorbiert ist. Für zukünftige Anwendungen muss die ALST1-vermittelte Zellaufnahme der Detonationsnanodiamanten verbessert werden. Dies kann erreicht werden durch die Verwendung anderer Linker-Systeme zur Verbrückung von Peptid und Partikeloberfläche um Adsorption zu verhindern. Die neuen analytischen Methoden für Amino-, Azid-, und Peptid-funktionalisierte Nanopartikel haben großes Potential in der Quantifizierung von Oberflächenmodifikationen von Nanopartikeln durch HPLC und UV/Vis. Die Bestimmung von Oberflächenbeladungen von Amin- und Azidgruppen basierend auf der Abspaltung von konjugiertem Fmoc des Fmoc-Rink Amid Linkers und Detektion durch UV/Vis Spektroskopie ist anwendbar auf alle Amin- und Azid-funktionalisierten Nanomaterialien. Jedoch kann es bei Partikeln welche besonders stabilen Suspensionen mit der Abspaltlösung bilden zu Problemen in der Quantifikation von Dibenzofulven und seinem Piperidin Addukt mittels UV/Vis Spektroskopie auf Grund von Streuung kommen. Die Detektion von Tyrosin- und Histidin-enthaltenden Peptiden auf Nanopartikeloberflächen auf Grundlage der Pauly Reaktion ist besonders geeignet als schneller und einfach durchzuführender qualitativer Nachweis für die erfolgreiche Konjugation von Peptiden auf Nanopartikeloberflächen. Der Hauptnachteil ist jedoch, dass Partikel mit Eigenfarbe nicht verwendet werden können. Die Aminosäureanalyse auf Grundlage von HPLC nach saurer Hydrolyse von Peptid-funktionalisierten Nanomaterialien und anschließender Derivatisierung mit PITC kann für alle Peptid- oder Protein-modifizierten Nanomaterialien verwendet werden. Es ermöglicht die Detektion von bis zu pikomolaren Konzentrationen und damit die Quantifizierung sehr geringe Oberflächenbeladungen mit Peptiden und Proteinen. Jedoch sind die resultierenden HPLC Chromatogramme schwierig zu interpretieren. Drei neue analytische Methoden auf der Grundlage von UV/Vis und HPLC Techniken wurden entwickelt und etabliert. Sie halfen bei der erfolgreichen Charakterisierung der synthetisierten DND und SPIONs mit dualer Funktionalisierung durch ALST1 und Cy5, beziehungsweise [ReBr(CO)3(L)]. Jedoch zeigten die Nanomaterialien auf Grund der hohen Tendenz zur Agglomeration keine Zellaufnahme. Das weitere Vorgehen umfasst die Verbesserung der Zellaufnahme durch ersetzen der Silica-Hülle der SPIONs mit PEG oder Chitosan. Bei den DND müssen andere Linkersysteme in Betracht gezogen und dann synthetisiert werden, welche die Adsorption der Peptidkette auf der Oberfläche des Partikels verhindern. KW - Nanopartikel KW - Bioanorganische Chemie KW - Peptide KW - SPION KW - Nanodiamond KW - Neuropeptide Hormone KW - Particle analytics KW - fluorescence KW - SPION KW - Nanodiamant KW - Neuropeptidhormon KW - Partikelanalytik KW - Fluoreszenz Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-103709 ER - TY - THES A1 - Heyer, Steffen T1 - Herstellung dotierter Nanodiamantpartikel und ihre Funktionalisierung mit schwefelhaltigen Gruppen T1 - Synthesis of doped nanodiamonds and their functionalization with sulfur-containing groups N2 - In dieser Dissertation werden Methoden zur Darstellung von Stickstoff- und Bor-dotierten Nanodiamantpartikeln durch Vermahlung von makroskopischem HPHT- und CVD-Diamant mit unterschiedlichen Mühlen und Mahlverfahren beschrieben. Untersucht wird dabei der Zusammenhang von erzielten Teilchengrößen nach dem Mahlen und den Kristallitgrößen der Ausgangsdiamanten sowie der angewandten Mahlmethode. Durch Anwendung verschiedener oxidativer Methoden wird während des Mahlens entstehender sp2-Kohlenstoff entfernt. Ebenfalls wird deren Einfluss auf das Fluoreszenzverhalten NV-haltiger Nanodiamantpartikel analysiert. Des Weiteren werden Syntheserouten zur kontrolliert ablaufender Oberflächenflächenfunktionalisierung von Nanodiamant mit schwefelhaltigen Gruppen wie Thiolen, Trithiocarbonaten und Disulfiden gezeigt, welche eine selektive Anbindung der Diamantpartikel an Goldstrukturen ermöglicht. Diese Verfahren werden an Detonationsdiamant sowie fluoreszierendem HPHT- und CVD-Diamantpartikeln angewandt. Gegebenfalls kann nach erfolgreicher Anbindung fluoreszierender Nanodiamantpartikel an Goldnanostrukturen unter Ausnutzung von Plasmonenresonanz die einzigartigen Spineigenschaften der NV-Zentren mit Hinblick auf einen möglichen Einsatz Stickstoff-dotierter Diamantnanopartikel in der Quanteninformationsverarbeitung untersucht werden. N2 - This dissertation presents methods to create nitrogen and boron doped nanodiamond particles by milling macroscopic HPHT- and CVD-diamond in different milling procedures. In this context, the correlation between resulting particle sizes after the milling with the crystallite sizes of the diamond starting material and the applied milling method is investigated. By application of different oxidative methods, sp2 carbon, that was created in the milling process, can be removed. In addition, the influence of the oxidation processes on the fluorescence properties of NV-are analysed. Furthermore, synthetic pathways for a controlled surface grafting of nanodiamond with sulfur containing groups like thiols, trithiocarbonates and disulfides which enable the functionalized diamonds to bind selectivly on gold surfaces are developed within this thesis. The syntheses are applied to detonation diamond aswell as fluorescent HPHT- and CVD-diamond. After a successful attachment of the functionalized nanodiamonds to goldnanostructures, the unique spinproperties of NV-centers can be studied with regard to a possible application of N-doped diamond nanoparticles in quantum computing. KW - Diamant KW - Nanopartikel KW - Dotierung KW - Mahlen KW - Nanodiamant KW - nanodiamond KW - boron-doped diamond KW - Oberflächenfunktionalisierung KW - Schwefel-Funktionalisierung KW - Vermahlung KW - NV-Zentren KW - Bor-dotiert Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123465 ER - TY - THES A1 - Auerswald, Johannes T1 - Untersuchungen zur Synthese aromatisch anellierter Pyracene und Pyracylene T1 - Investigations on the synthesis of aromatically annulated pyracenes and pyracylenes N2 - Ziel dieser Arbeit war die Synthese geeigneter Modellsysteme für die Untersuchung gekrümmter Graphenfragmente. Dafür bot sich die Synthese von substituierten Pyracylenen an. Diese sollten in eine Aromatensphäre eingebunden sein, um so den Einfluss der Graphenumgebung zu simulieren. Ein geeignetes einfaches Untersuchungsobjekt stellt das Bisbenzo[d,j]pyracylen/ Dicyclopenta[fg,op]tetracen (10) dar. Auch die Einbettung in größere „Nanographene“ ist ein lohnendes Syntheseziel zur Untersuchung von Struktur-Eigenschaftsbeziehungen. Gegebenenfalls kann nach erfolgreicher Darstellung auch das Auftreten der Stone-Wales-Umlagerung untersucht werden. Das heißt, die Systeme sollen mit Hilfe der FVP auf ihr Vermögen zur Kohlenstoffgerüstumlagerung untersucht werden. Die folgende Abbildung zeigt die Zielmoleküle und mögliche Stone-Wales-Umlagerung. ... N2 - The aim of this work was the synthesis of suitable model systems for the study of curved graphene fragments; more specifically the synthesis of substituted pyracylenes. These should be integrated into an aromatic network, to simulate the influence of the graphene environment. Bisbenzo[d,j]pyracylene/ dicyclopenta[fg,op]tetracene (10) is a suitable simple synthetic aim. Embedding this molecule into larger "nanographenes" is a rewarding synthetic target for the investigation of structure-property relationships. After successful preparation, the occurrence of the Stone-Wales rearrangement, if present, may be studied. This means the systems will be studied with the help of FVP on their ability to rearrange their carbon skeleton. The following figure shows the target molecules and possible Stone-Wales rearrangement. ... KW - Kohlenwasserstoffe KW - Tetrahydrodicyclopenta[fg,op]tetracen KW - pyracene KW - pyracylene KW - tetrahydrodicyclopenta[fg,op]tetracene KW - Scholl reaction KW - tetraaryl pyracene KW - spiro hydrocarbons KW - Stone-Wales rearrangement KW - Pyracen KW - Pyracylen KW - Scholl-Reaktion KW - Tetraarylpyracene KW - Spirokohlenwasserstoffe KW - Stone-Wales-Umlagerung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-110815 ER - TY - THES A1 - Buschmann, Peter T1 - Anbindung von Katalysatoren an Nanodiamantpartikel mit Hilfe starrer Linker T1 - Immobilisation of catalysts on nanodiamond particles using rigid linkers N2 - Das Ziel dieser Arbeit war die Herstellung von Diamantmaterialien, deren Oberflächen mit Alkinen, Aziden oder Aldehyden modifiziert waren. Diese funktionellen Gruppen sollten die einfache Anbindung verschiedener katalytisch aktiver Systeme mit Hilfe der 1,3-dipolaren Cycloaddition nach Huisgen bzw. Iminbildung ermgöglich. Da in einer vorangegangenen Arbeit Hinweise darauf gefunden wurde, dass die hochgradig funktionalisierte Oberfläche von Detonationsnanodiamant dazu in der Lage ist, die Aktivität von immobilisierten Katalysatoren zu behindern. Darum wurde in dieser Arbeit verglichen, ob die Verwendung von starren Linkern auf Tolanbasis einen Vorteil gegenüber ihren flexiblen Gegenstücken liefert. Dazu wurde für jede der oben genannten Funktionalisierungsarten je ein Diamantmaterial mit flexibler sowie mindestens eines mit unbiegsamer Verbindungseinheit hergestellt und getestet. Dadurch konnte das Konzept der starren Linker für Enzyme bestätigt werden und es wurde eine signifikant höhere Aktivität erhalten, als wenn flexible Anbindungsbrücken verwendet wurden. Bei Organokatalysatoren und metallorganischen Systemen konnten jedoch keine erfolgreichen Katalysen durchgeführt werden. N2 - The aim of this work was the production of diamond materials whose surfaces were modified either with alkynes, azides, or aldehydes. These functional groups were supposed to allow the simple immobilisation of catalytically active systems via 1,3-dipolar cycloadditions or imine formation, respectively. In a previous publication, it was found that the highly functionalised surface of detonation nanodiamond can reduce the activity of immobilised catalysts. In this work, it was therefore investigated whether the use of rigid linkers based on tolane derivatives would be advantageous when compared to their flexible counterparts. For this purpose, at least one example for both cases was produced for each of the above mentioned functional groups. Test results showed that the concept of the rigid linkers was successful for the immobilisation of enzymes, for which a significantly higher activity was detected when compared to flexible linkers. However, for organocatalysts and metal organic systems successful catalysis was not achieved. KW - Nanopartikel KW - Diamant KW - Dipolare Cycloaddition KW - Immobilisiertes Enzym KW - Organokatalyse KW - Katalysatorimmobilisierung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-132966 ER - TY - THES A1 - Betz, Patrick Peter T1 - Immobilisierung von Kohlenhydratbausteinen auf Nanodiamant-Partikeln mit Hilfe von C-C-Verknüpfungsreaktionen T1 - Immobilization of saccharides on nanodiamond particles by C-C bond formation reactions N2 - In dieser Arbeit wurde die Erstfunktionalisierung des Diamanten durch die Diels-Alder-Reaktion realisiert und anschließend ein Thiol als weiterführende Bindungsstelle etabliert. Die Thiolfunktion konnte in einer radikalischen Reaktion mit einem terminalen Alken umgesetzt werden. Als Reaktionspartner wurde ein Allylglucosid synthetisiert und mit Hilfe eines Radikalstarters an den Diamanten gebunden. Für nicht-radikalische Verknüpfungsreaktionen eines vorfunktionalisierten Diamanten mit dem Zielmolekül konnte die Diazoniumsalz-Methode genutzt werden. Die Wahl der 4 Aminobenzoesäure als Edukt der Reaktion erlaubte in einer einstufigen Reaktion die Einführung einer Carbonsäuregruppe auf der Oberfläche. Durch Umsetzung mit einem Amin (Mannosecluster) konnte eine stabile Amidbindung erzeugt werden. Die erhaltenen Saccharid-Diamant-Konjugate wurden anschließend auf deren Inhibitionsvermögen gegenüber Escherichia coli getestet. Um eine Erweiterung der Methoden zur stabilen Erstfunktionalisierung der Diamantoberfläche zu erreichen, wurde untersucht ob die aus der Fulleren-Chemie bekannte Bingel-Hirsch-Reaktion auf Nanodiamant übertragbar ist. Für die Untersuchungen am Diamanten wurden unterschiedliche Malonsäurederivate eingesetzt, welche signifikante Banden im Infrarotspektrum besitzen, um eine eindeutige Funktionalisierung nachweisen zu können. N2 - In this work primary functionalization of nanodiamond was realized by [4+2]-cycloaddition of o-chinodimethane. In the next steps thiol groups could be established for further functionalisation. The thiol group serves as a binding position for a radical reaction with allyl groups. As a reactant allylglycoside was synthesized and bound to the diamond surface in the presence of a radical starter. The diazonium salt method can be applied in order to couple the target molecule with the functionalized diamond, too. 4-aminobenzoic acid as starting material allows for a direct introduction of a carboxyl group on the diamond surface. An amide bond could be created by reaction of primary amine (carbohydrate cluster) and acid group. After completion of the synthesis of the saccharide-diamond conjugates their potency as inhibitor of Escherichia coli was tested. In order to extend the methods for stable functionalization of the diamond surface, the ability of introducing the Bingel-Hirsch-reaction, which is known from the chemistry of fullerenes, was investigated. Different malonic acid derivates with significant IR bands were applied for the investigation on diamond. KW - Synthesediamant KW - Festkörperoberfläche KW - Funktionalisierung KW - Kohlenstoff-Kohlenstoff-Bindung KW - Nanodiamant KW - Bingel-Hirsch-Reaktion KW - Oberflächenfunktionalisierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-106421 ER - TY - THES A1 - Kirchwehm, Yvonne T1 - Untersuchungen zur Synthese aromatisch anellierter Triquinacene T1 - Investigations on the synthesis of aromatically annulated triquinacenes N2 - In dieser Arbeit wurde ein geeigneter Zugang zu TBTQ-Derivaten erarbeitet, der eine paarweise Funktionalisierung der aromatischen Positionen in direkter Nachbarschaft zum Triquinacen-Kern zulässt. Hierfür wurde sowohl die doppelte Cyclodehydratisierungsroute als auch die dreifache Cyclisierungsvariante zur Darstellung von Tribenzotriquinacenen dahingehend modifiziert, dass die Einführung der „ortho“-Substituenten bereits zu Beginn der Synthese mit den Edukten erfolgte, da eine nachträgliche Funktionalisierung der gewünschten Positionen am TBTQ aufgrund sterischer Faktoren nicht möglich ist. Es wurden unter anderem die ersten literaturbekannten „ortho“-substituierten TBTQ-Derivate erhalten und vollständig charakterisiert. Zur Erweiterung des aromatischen Systems wurden außerdem Benzodiphenanthrenotriquinacen-Vorstufen synthetisiert, die im Falle der doppelten Cyclodehydratisierungsroute Acenapthylen-Derivate lieferten. Benzodiphenanthrenotriquinacen konnte mit Hilfe der dreifachen Cyclisierungsvariante synthetisiert werden. Die Zielmoleküle sollen als Vorstufen für überbrückte aromatisch anellierte Triquinacene dienen. N2 - In this work a suitable reaction pathway for TBTQ-derivatives with geminate functionalization of the aromatic positions adjacent to the triquinacene core was developed. Therefore, the double cyclodehydration as well as the triple cyclization strategy for the synthesis of tribenzotriquinacenes were modified, so that the introduction of the „ortho“-substituents takes place as part of generating the starting material at the beginning of the synthetic scheme. The reason for this is that subsequent functionalization at the „ortho“-positions is impeded due to steric hindrance. Among other things the first “ortho”-substituted TBTQ-derivatives known in literature were synthesized and fully characterized. Furthermore, precursors for benzodiphenanthrenotriquinacene were synthesized in order to extend the aromatic periphery. The double cyclodehydration strategy provided acenaphthylene derivatives. However, Benzodiphenanthrenotriquinacene could be generated via triple cyclization strategy. The target molecules might serve as precursors for the formation of bridged aromatically annulated triquinacenes. KW - Triquinacenderivate KW - Aromatisch anellierte Triquinacene KW - „ortho“-substituierte Tribenzotriquinacene KW - Benzodiphenanthrenotriquinacen KW - gekrümmte Kohlenwasserstoffe KW - Aromatically annulated triquinacenes KW - „ortho“-substituted tribenzotriquinacenes KW - benzodiphenanthrenotriquinacene KW - curved hydrocarbons KW - Chemische Synthese KW - Kohlenwasserstoffe Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-85088 ER -