TY - THES A1 - Keppner, Fabian T1 - closo-Borcluster-oberflächenmodifizierte Chromatographiematerialien -sowie- Trialkylammonium-Salze von polyhalogenierten und nicht-halogenierten 1-Amino-carba-closo-dodecaboraten T1 - closo-boron cluster modified chromatography materials -and- trialkylammonium salts of polyhalogenated and non-halogenated 1-amino-carba-closo-dodecaborates N2 - Auf Grund der hohen Affinität von closo-Borclustern zu Proteinen, stellen mit closo-Borclustern modifizierte Chromatographiematerialien mögliche neuartige Chromatographiematerialien in der biologischen und pharmazeutischen Chemie dar. Im Zuge dieser Arbeit sollen Synthesen von Amin- und Allyl-funktionalisierten closo-Borclustern (Dicarba-closo-dodecaborane, Carba-closo-dodecaborat-, closo-Dodecaborat- und closo-Decaborat-Anionen) entwickelt werden, die sich für eine anschließende Oberflächenmodifikation eignen. Als Vergleichsverbindung mit einem organischen Grundgerüst dienen Amantadin und Allyl-funktionalisierte Adamantan-Derivate. Diese Verbindungen sollen auf die Oberfläche von Materialien aufgebracht und diese anschließend charakterisiert werden. Besonders die Untersuchung bezüglich ihrer Fähigkeit der dynamischen Bindungskapazität gegenüber Bovin-Albumin-Serum Fraktion V ist ein Schwerpunkt dieser Arbeit. Hierbei wird vor allem der Vergleich zu dem käuflich erwerblichen CaptoTM Blue gezogen. Der zweite Teil dieser Arbeit beschäftigt sich mit der Synthese von Trialkylammonium-Salzen von halogenierten und nicht halogenierten 1-Amino-carba-closo-dodecaborat-Anionen. Hierbei steht vor allem die Untersuchung der Wechselwirkung zwischen den verschiedenen Kationen und dem Anion im Fokus. Zu diesem Zweck wurden Synthesen hinführend zu den jeweiligen Salzen entwickelt und die erhaltenen Produkte umfassend charakterisiert. N2 - Due to the high affinity of closo-boron clusters for proteins, chromatography materials modified with closo-boron clusters are possible new types of chromatography materials in biological and pharmaceutical chemistry -dodecaborane, carba-closo-dodecaborate, closo-dodecaborate and closo-decaborate anions), which are suitable for a subsequent surface modification. Amantadine and allyl-functionalized adamantane derivatives serve as comparison compounds with an organic backbone. These compounds should be applied to the surface of materials and then characterized. A particular focus of this work is the investigation regarding their ability of the dynamic binding capacity against Bovin-Albumin-Serum fraction V. Above all, the comparison is made to the commercially available CaptoTM Blue. The second part of this thesis deals with the synthesis of trialkylammonium salts of halogenated and non-halogenated 1-amino-carba-closo-dodecaborate anions. The main focus here is on the interaction between the different cations and the anion. For this purpose, syntheses leading to the respective salts were developed and the products obtained were comprehensively characterized. KW - Chromatographie KW - Borcluster Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-205763 ER - TY - THES A1 - Rang, Maximilian T1 - Metallähnliche Reaktivität \(in\) \(situ\) erzeugter Borylene T1 - Metallomimetic reactivity of transiently generated borylenes N2 - Einfach Lewis-Basen stabilisierte Borylene wurden durch Reduktion in situ hergestellt und in Gegenwart von Kohlenstoffmonoxid oder Distickstoff umgesetzt. Die entstandenen Verbindungen wurden mittels NMR-, ESR-, UV/Vis- und IR-Spektroskopie sowie Einkristallröntgenstrukturanalyse charakterisiert. Im Zuge dessen konnten für die erhaltenen Spezies Eigenschaften ermittelt werden, die denen analoger Übergangsmetallkomplexe ähneln. Ferner konnten die zugrundeliegenden mechanistischen Vorgänge der Reaktionen durch gezielte Variation der Reaktionsparameter aufgeklärt werden. Zudem wurden Redoxverhalten und Reaktivitäten der isolierten Produkte in weiterführenden Studien näher untersucht. N2 - Mono(Lewis base)-stabilized borylenes were transiently generated by reduction and converted in the presence of carbon monoxide or dinitrogen. The resulting compounds were characterized by means of NMR, EPR, UV-vis and IR spectroscopy as well as X-ray diffraction analysis. The properties determined for the isolated species in the course of these investigations closely resemble those of analogous transition metal complexes. Furthermore, it was possible to elucidate the mechanistic processes underlying the reactions through systematic alteration of the reaction parameters. Additionally, the redox behaviour and reactivities of the isolated products were examined more closely. KW - Bor KW - Distickstoff KW - Kohlenstoffmonoxid KW - Borylene KW - niedervalente Borverbindungen KW - Distickstoff Aktivierung KW - Distickstoff Spaltung KW - Borylencarbonyle KW - Kohlenmonoxid KW - cAAC Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-240465 ER - TY - THES A1 - Hennig, Philipp Thomas T1 - Synthese, Charakterisierung und Eigenschaften neuartiger Mono- und Bis-Pentafluorethylborate sowie Pentafluorethylboran-Addukte T1 - Synthesis, characterisation and propterties of new mono- and bis-pentafluoroethylborates as well as pentafluoroethylborane-adducts N2 - Diese Arbeit beschäftigt sich mit der Synthese, Charakterisierung und Eigeschaften neuer Monopentafluorethylborat-Anionen der Form [C2F5BH2X]- (X= F, Cl, Br), [C2F5BH2(CN)]-, [C2F5BH(CN)2]-, [C2F5BH(CN)X]- (X= F, Cl, Br) und [C2F5B(CN)X2]- (X= Cl, Br)sowie den Bis-pentafluorethylborat-Anionen [(C2F5)2B(OMe)(CN)]-, [(C2F5)2BF(CN)]- und [(C2F5)2B(CN)2]-. Von einigen dieser Verbindungen wurden Ionische Flüssigkeiten basierend auf dem 1-Ethyl-3-methylimidazolium-Kation synthetisiert und deren physikalischen Parameter ausführlich untersucht. Zudem wurden Pentafluorethylboran-Addukte mit verschiedenen Lewis-Basen der Form C2F5BH2-L (L= THF, SMe2, CH3CN, Pyridin, PPh3, CAAC, IDipp, SIDipp, Me4Im, (iPr)2Me2Im, tBu2Im) hergestellt welche zum Teil als Startmaterialien für die Synthese von Monopentafluorethylboraten verwendet wurden. N2 - In this work, syntheses, characterisation and properties of new monopentafluoroethylborate anions like [C2F5BH2X]- (X= F, Cl, Br), [C2F5BH2(CN)]-, [C2F5BH(CN)2]-, [C2F5BH(CN)X]- (X= F, Cl, Br) and [C2F5B(CN)X2]- (X= Cl, Br) as well as bis-pentafluoroethylborate anions [(C2F5)2B(OMe)(CN)]-, [(C2F5)2BF(CN)]- and [(C2F5)2B(CN)2]- are presented. Furthermore, several of these compounds were transformed into Ionic Liquids by isolation of the corresponding 1-ethyl-3-methylimidazolium salt and their physical propterties were studied in detail. Besides, pentafluoroethylborane adducts with different lewis bases like C2F5BH2-L (L=thf, SMe2, CH3CN, pyridin, PPh3, CAAC, IDipp, SIDipp, Me4Im, (iPr)2Me2Im, tBu2Im) were synthesized which turned out to be good starting materials for the synthesis of monopentafluoroethylborates. KW - Borate KW - Pentafluorethylgruppe KW - Hydridogruppe KW - Viskosität KW - Elektrische Leitfähigkeit KW - Mono-Pentafluorethylborate KW - Bis-Pentafluorethylborate KW - Pentafluorethylboran-Addukte KW - Ionische Flüssigkeiten Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192899 ER - TY - THES A1 - Stangl, Johannes Maria T1 - Quantitative Feuchtesensorik mit lumineszierenden Ln-MOFs und Polymer-MOF-Matrix-Membranen T1 - Quantitative humidity sensning with luminescent Ln-MOFs and Polymer-MOF-Matrix-Membranes N2 - In der vorliegenden Arbeit werden die Sensorikeigenschaften der lumineszierenden metallorganischen Gerüstverbindungen (metal-organic frameworks, MOFs) ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(3@∞)[Sr0.90Eu0.10(Im)2] (2), ■(3@∞)[Tb(Im)3] (3), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5), sowohl in Form der Bulksubstanzen als auch in Form von mixed-matrix membranes (MMMs) gegenüber den Analyten Wasser, Methanol, Ethanol und Isopropanol untersucht und mittels kinetischer Betrachtungen quantitativ beschrieben. Hierfür wurde ein Versuchsaufbau konstruiert, der den Anforderungen einer quantitativen Erfassung der Sensorikeigenschaften genügt und einflussgebende externe und interne Parameter, wie die Konzentration des Analyten, Temperatur, Druck, Probenmenge und Probenoberfläche standardisiert, um eine möglichst genaue Erfassung der auftretenden Veränderung der Lumineszenzintensität zu ermöglichen. Zusätzlich wurde eine mathematische Betrachtung genutzt, um die Ergebnisse der Experimente zu interpretieren und in einen Gesamtkontext zu setzen. Für jedes der fünf Modellsysteme wurde je eine Messreihe gegen ein breites Spektrum an relativen Feuchten (Wasser als Analyt) bei 25 °C durchgeführt. Der in allen Fällen auftretende Lumineszenzverlust ließ sich jeweils mittels einer Exponentialfunktion beschreiben und zur Bestimmung der konzentrationsabhängigen Reaktionskonstanten sowie der Halbwertszeiten nutzen. Die gewonnenen Informationen wurden verwendet, um die Reaktionskonstanten und die Schwellenwerte der Sensorik der jeweiligen Systeme zu bestimmten. In weiteren Versuchsreihen wurde der Messaufbau genutzt und der Einfluss der Alkohole Methanol, Ethanol und Isopropanol auf die Lumineszenz der MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) bei verschie-denen Konzentrationen in der Gasphase und bei unterschiedlichen Temperaturen untersucht, quantitativ bestimmt und gemäß der vorangegangen Messreihen für Feuchte beschrieben. Zusätzlich wurde die Veränderung des Lumineszenzmusters der MOFs ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) untersucht. Die Möglichkeiten der Prozessierung von ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), und ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) wurden im Hinblick auf eine praktische Anwendung im Bereich der Sensorik hin untersucht. Hierfür wurden die jeweiligen Bulksubstanzen via Dropcoating in die drei Polymere Polystyrol (PS), Polyvinychlorid (PVC) und Polymethylpenten (TPX) eingebettet. Die so dargestellten MMMs wurden auf ihre Sensorikeigenschaften hin untersucht und der Lumineszenzverlust wurde quantitativ beschrieben. Des Weiteren wurde die korrespondierende Bulksubstanz, in Bezug auf die (konzentrationsabhängigen) Reaktionskonstanten und Halbwertszeiten, mit den MMMs verglichen. Im Rahmen einer Kooperation mit der Arbeitsgruppe von Prof. Dr. Janiak der Heinrich-Heine-Universität Düsseldorf wurden die MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1) und ■(3@∞)[Sr0.90Eu0.10(Im)2] (2) in Polysulfon (PSF) eingebettet und ebenfalls auf ihre Fähigkeit zur Feuchtesensorik hin untersucht. Im Rahmen der vorliegenden Arbeit war es erstmals möglich, die Sensoreigenschaften der genutzten MOFs und CPs (1 - 5) quantitativ zu erfassen und mathematisch zu beschreiben. Ebenso konnte das entwickelte Sensorikkonzept erfolgreich auf die Erfassung von verschiedenen Alkoholen in der Gasphase übertragen werden (für System 1, 4 und 5). Anschließend war es möglich, die genutzten Modellsysteme 1, 2 und 4 unter dem Erhalt der Lumineszenzeigenschaft in verschiedene Polymere einzubetten und deren Eigenschaften zur Feuchtesensorik ebenfalls quantitativ zu erfassen und mathematisch zu beschreiben. Im letzten Abschnitt der Arbeit wurden die beiden porösen ZIFs (zeolitic imidazolate frameworks) Na-Rho-ZMOF (6) und Zn(nmIm)2 (7) mit einer Terbiumnitratlösung behandelt, um durch die Füllung der Kavitäten die Lumineszenzeigenschaft der Terbiumionen in das ZIF zu implementieren. Der Grad und die Qualität der Befüllung wurden anschließend analytisch auf Lumineszenzeigenschaften hin untersucht. Hierbei konnte die Befüllung von Na-Rho-ZMOF (6) erfolgreich nachgewiesen werden, während es bei Zn(nmIm)2 (7) nicht zu einer Befüllung des Porensystems kam. N2 - In the present work, the sensor properties of luminescent metal-organic frameworks (MOFs) ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(3@∞)[Sr0.90Eu0.10(Im)2] (2), ■(3@∞)[Tb(Im)3] (3), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4), and ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) were investigated and quantitatively described. Therefore, bulk substances and MMMs (mixed-matrix membranes) were generated and tested against different analytes like water (relative humidity) and alcohols like, methanol, ethanol and isopropanol. For this purpose, a special experimental setup was constructed, which meets the requirements of a quantitative detection of the sensor properties and influential environmental parameters, such as the concentration of the analyte (e.g. in the form of relative humidity of the atmosphere), temperature, pressure, sample mass and sample surface. This standardized method allowed a precise determination of the occurring luminescence changes. In addition, a mathematical methodology was used to interpret the results of the experiments and place them in an overall context. For each of the five model systems, a series of measurements were carried out against a wide range of relative humidity at 25 °C. In all cases the occurring "turn-off"-effect could be described for each experiment with an exponential function and used to determine the concentration-dependent reaction constants and the half-lifes. The obtained information was used to determine the reaction constants and the thresholds of the sensor properties of the respective systems. In a further series of experiments, the influence of the alcohols methanol, ethanol, and isopropanol onto the luminescence of the MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4), and ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) at various concentrations and temperatures, was quantitatively determined and described mathematically. The relevant properties, such as concentration-dependent reaction constants and half-lifes, were determined. In addition, changes in the luminescence pattern of the MOFs were observed, studied, and described for ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) and ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5). To enable a real application, the possibilities of processing ■(3@∞)[Ba0.98Eu0.02(Im)2] (1) and ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) were investigated. For this purpose, the respective bulk substances were embedded in the three polymers polystyrene (PS), polyvinyl chloride (PVC), and polymethylpentene (TPX) via dropcoating. The MMMs were tested for their ability of sensing humidity. The "turn-off"-effect was quantitatively described and analyzed. The corresponding bulk substance was set in relation to point out the occurring changes in stability (concentration-dependent reaction constants and half-lifes). Within a cooperation with the working group Prof. Janiak of the Heinrich Heine University, the MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1) and ■(3@∞)[Sr0.90Eu0.10(Im)2] (2) were embedded into polysulfone (PSF) and also tested for their ability to sense humidity. In this work it was possible to quantify and mathematically describe the sensor properties of the MOFs and CPs used (1 - 5) for the first time. The developed sensing concept was successfully transferred to detect various alcohols in the gas phase (for systems 1, 4, and 5). Subsequently, it was possible to embed the model systems (1, 2, and 4) used in different polymers, while obtaining the luminescence property. Subsequnt, it was possible to record quantitatively and describe mathematically their properties for humidity sensing. In the last part of the work, the two porous ZIFs (zeolitic imidazolate frameworks) Na-Rho-ZMOF (6) and Zn(nmIm)2 (7) were mixed with a terbium nitrate solution to implement the luminescence properties into the ZIFs by filling the cavities. The degree and the quality of the filling were then checked by a number of analytical methods and the luminescence properties were investigated. The filling of the pore system was detected successfully for Na-Rho-ZMOF (6). For Zn(nmIm)2 (7) no evidence of pore filling was found. KW - MOFs KW - Sensorik KW - Lumineszenz Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173190 ER - TY - THES A1 - Duda, Katharina T1 - Synthesen und Eigenschaften von Dicarba-closo-dodecaboran-Derivaten und ersten gemischten Fluorohydridoborat-Anionen T1 - Syntheses and properties of dicarba-closo-dodecaborane derivatives and first mixed fluorohydridoborate anions N2 - Ein wesentliches Ziel dieser Arbeit war die Durchführung von regioselektiven Deborierungsreaktionen von 1,7-Dicarba-closo-dodecaboranen sowie die Herstellung von polyfunktionalisierten meta-Carboran-Derivaten. Die synthetisierten {nido-7,9-C2B9}- und {closo-1,7-C2B10}-Derivate und ausgewählte ortho-Carboran-Derivate wurden nach erfolgter Kumada-artiger Kreuzkupplungsreaktion bzgl. ihrer Koordinationschemie untersucht. Die ethinylfunktionalisierten Borcluster wurden als Edukte für die Herstellung von Gold(I)-Komplexen genutzt. Weitere Ziele dieser Arbeit waren außerdem die Synthese und umfassende Charakterisierung des gemischten Fluorohydridoborat-Anions [BHF3]− und der carboranylsubstituierten Borat-Anionen [1-HF2B-closo-1,2-C2B10H11]− und [1-HF2B-9,12-I2-closo-1,2-C2B10H9]− sowie die Untersuchung hinsichtlich ihrer Folgechemie. N2 - An essential aim of the presented work was the investigation of regioselective deboronation reactions of 1,7-dicarba-closo-dodecaboranes as well as the preparation of poly-functionalized meta-carboranes. After the {nido-7,9-C2B9}-, {closo-1,7-C2B10}- and selected ortho-carborane derivates were prepared by a Kumada-type cross coupling reaction, the behaviour of these compounds in coordination chemistry was examined. The ethynyl-functionalised boron clusters were used as educts for the preparation of gold(I) complexes. Further objectives of this work were the synthesis and complete characterisation of the mixed fluorohydridoborate anion [BHF3]− and of the carboranyl substituted anions [1-HF2B-closo-1,2-C2B10H11]− and [1-HF2B-9,12-I2-closo-1,2-C2B10H9]− and in further applications in syntheses. KW - Carborane KW - Fluoroborate KW - regioselektive Deborierungsreaktionen KW - Gold(I)-Komplexe KW - gemischte Fluorohydridoborat-Anionen KW - Cluster-Aufbau Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-181038 ER - TY - THES A1 - He, Jiang T1 - Studies of N-heterocyclic olefins as donors in triarylboranes and electron-poor phenylpyridyl-fused boroles T1 - Studien N-heterozyklischer Olefine als Donoren in Triarylboranen und Elektronenarmer Phenylpyridyl-fusionierter Borole N2 - Chapter 1 N-Heterocyclic olefins (NHOs), relatives of N-heterocyclic carbenes (NHCs), exhibit high nucleophilicity and soft Lewis basic character. To investigate their π-electron donating ability, NHOs were attached to triarylborane π-acceptors (A) giving donor(D)-π-A compounds 1-3. In addition, an enamine π-donor analogue (4) was synthesized for comparison. UV-visible absorption studies show a larger red shift for the NHO-containing boranes than for the enamine analogue, a relative of a CAAC. The red shifted absorption of NHO-containing boranes indicate smaller energy gaps of NHO-containing boranes than CAAC-containing boranes. Solvent-dependent emission studies indicate that 1-4 have moderate intramolecular charge transfer (ICT) behavior. Electrochemical investigations reveal that the NHO-containing boranes have extremely low reversible oxidation potentials (e.g., for 3, E1/2ox = –0.40 V vs. Fc/Fc+ in THF) which indicate the electron rich property of NHOs. Furthermore, TD-DFT calculations were carried out on these four D-π-A boranes. The results show that the LUMOs of 1-4 only show a small difference, but the HOMOs of 1-3 are much more destabilized than that of the enamine-containing 4, which is in agreement with the electrochemical investigations and confirms the stronger donating ability of NHOs. Chapter 2 Since the beginning of this century, the chemistry of (hetero)arene-fused boroles has attracted increasing interest. (Hetero)arene-fused boroles exhibit strong Lewis acidity, distinct fluorescence properties, strong electron accepting abilities, etc. However, their chemistry been only very briefly reviewed either as part of reviews on “free” boroles or on boron-doped polycyclic aromatic hydrocarbons (PAHs). In this chapter, we addressed the chemistry of (hetero)arene-fused boroles from fundamentals to their widely varying applications. It includes: 1) Synthetic methodology  Both historical and recently developed strategies for the synthesis of fused boroles. 2) Stabilities  A comparison of different kinetic protection strategies. 3) 9-Borafluorenes with a fluorinated backbone  Application as Lewis acids, forming ion pairs with Cp2Zr(CH3)2 and applied as activators for polymerization, activators of H2, and other related applications. 4) Donor-acceptor 9-borafluorenes  Applications as F– “turn on” sensors, potential applications as electron accepting units for organic (opto)electronics, bipolar transporting materials, TADF materials, and different functionalization strategies. 5) Heteroarene-fused boroles  Enhanced antiaromaticity, unique coordination mode and their interesting properties. 6) Intramolecular dative bonding in 9-borafluorenes  Bond-cleavage-induced intramolecular charge transfer (BICT), BICT-induced large Stoke shifts and dual emissions, application as a ratiometric sensor. 7) 9-Borafluorene-based main chain polymers  Application in polymer chemistry and their distinct properties, e.g., as a sensor for gaseous NH3. 8) Electrochemistry  A comparison of electron-accepting ability of different functionalized fused boroles through electrochemical studies. 9) Chemical reduction of fused boroles  Stable radical anions and dianions of fused boroles and their properties. 10) Three-coordinate borafluorenium cations  Cationic 9-borafluorenes and their interesting properties, e.g., in THF, reversible thermal colour switching properties. Finally, a conclusion and outlook regarding the chemistry, properties and applications, and suggestions for areas which require further study was provided.   Chapter 3 Interested in fusing electron-poor arene onto boroles, two electron-poor phenylpyridyl-fused boroles, [TipPBB1]4 and TipPBB2 were prepared. [TipPBB1]4 is a white solid adopting a unique coordination mode, which forming a tetramer with a cavity in both the solid state and solution (1H DOSY). The boron center of TipPBB2 is 4-coordinate in the solid state, evidenced by a solid-state 11B{1H} RSHE/MAS NMR study, but the system dissociates in solution, leading to 3-coordinate borole species. [TipPBB1]4 exhibits two reduction processes which are attributed to the phenylpyridyl cores. TipPBB2 also exhibits two reduction processes with the first half-reduction potential of E1/2red = –1.94 V. The electron accepting ability of TipPBB2 is largely enhanced and comparable to that of FMesBf. This enhanced electron accepting ability is attributed to the electron withdrawing property of the pyridyl group. TipPBB2 exhibits concentration- and temperature-dependent dual fluorescence in solution. With the temperature is lowered, the emission intensity decreases (Figure 6.4, left). We suggested that the dual fluorescence is caused by an equilibrium between 3-coordinate TipPBB2 and a weak intermolecular adduct of TipPBB2 via a B–N bond. This hypothesis was further supported by lifetime measurements at different concentrations, low temperature excitation spectra low temperature 1H NMR spectra and lifetime measurements upon addition of DMAP to a solution of TipPBB2 to simulate the 4-coordiante TipPBB2 species. Interestingly, the ratio of the relative percentages of the two lifetimes shows a linear relationship with temperature; thus, TipPBB2 could serve as a fluorescent thermometer. Furthermore, theoretical studies were carried out on TipPBB2, and two models, ((BMe3)TipPBB1(NMe3) and (BMe3)TipPBB2(NMe3)), which utilize a BMe3 group as the Lewis acid coordinated to pyridine and an NMe3 group as the Lewis base coordinated to the boron center of the borole, were used to simulate the [TipPBB1]4 and intermolecular 4-coordinate TipPBB2, respectively. Theoretical studies indicate that the HOMO of TipPBB2 is located at the Tip group, which is in contrast to its borafluorene derivatives for which the HOMOs are located on the borafluorene cores. Chapter 4 Two derivatives of phenylpyridyl-fused boroles were prepared via functionalization of the pyridyl groups in two different directions, namely an electron-rich dihydropyridine moiety (compound 10) and an electron-deficient N-methylpyridinium cation (compound 11). Both compounds were fully characterized. The 11B NMR signal of compound 10 was observed at 58.8 ppm in CDCl3, which suggests strong conjugation between the boron atom and dihydropyridine moiety. Compound 11 shows a reversible coordination to THF which was confirmed by NMR studies. Compared to other 2,4,6-triisopropylphenyl protected 9-borafluorenes which only coordinate to CH3CN or DMF, the coordination of the weaker and bulkier THF to compound 11 indicates an extremely electron-deficient boron center in compound 11. The electron-rich property of the dihydropyridine moiety of compound 10 was confirmed by its oxidation potential (Epc = +0.37 V). Due to the strong conjugation of the dihydropyridine moiety with the boron atom, the reduction potential of compound 10 shifts cathodically and is more negative than –2.5 V. Compound 11 exhibits three reduction processes with the first reversible reduction potential at Ered1/2 = –1.23 V, which is significantly anodically shifted compared to that of its precursor (TipPBB2) or its framework 1-methyl-2-phenylpyridin-1-ium triflate (12). This significantly anodically shifted reduction potential confirms an extremely electron-deficient property of compound 11. Photophysical studies indicate that the lowest energy transition of compound 10 is more likely a locally-excited (LE) transition and compound 11 exhibits a polarized ground state. Furthermore, we performed theoretical studies for both compounds. The electron cloud distribution of the HOMO of compound 10 supports the strong conjugation between the boron atom and the dihydropyridine moiety in the ground state. An extremely low LUMO energy was determined by theoretical studies which confirmed the extremely electron-deficient property of compound 11.   Chapter 5 Inspired by the enhancement of electron accepting ability with increasing numbers of electron withdrawing groups at boron, we tried to study the properties of a bis(pyridyl)arylboranes. In our attempt to synthesize a bis(pyridyl)arylborane, we obtained a bis(2-pyridyl)methoxyborate Li+ complex which is as a dimer both in solution and the solid state. In the solid state, compound [16]2 is a dimer containing two bis(2-pyridyl)methoxyborate which are linked by two lithium cations. Each lithium cation coordinates to one methoxy group and two pyridyl groups, one from each of the two bis(2-pyridyl)methoxyborate anions. The parameters of [16]2 were compared with other bis(2-pyridyl)methoxyborate stabilized Pt(IV) complex, bis(2-pyridyl)hydroxylborate stabilized Ru(II) complex and the dimer of EtAl(OMe)(2-pyridyl)2Li. To confirm the coordination mode in solution, 1H DOSY spectroscopy was carried out in CD2Cl2. The van der Waals radius obtained by 1H DOSY nicely matches with the result from the solid state and thus proves the dimer of 16 is persistent in solution. Finally, different Lewis acids (e.g., TMSCl, BF3•Et2O, AlCl3, HCl) were used to attempt to detach the methoxy group of [16]2. However, we observed either decomposition or selective cleavage of the Tip group, or no reaction at all, rather than cleavage of the methoxy group from boron. N2 - 1 Kapitel 1 N-Heterocyclische Olefine (NHOs) sind Verwandte der N-heterocyclischen Carbene (NHCs) und weisen eine hohe Nukleophilie sowie einen weichen Lewis-Grundcharakter auf. Um ihre Fähigkeit als π-Elektronendonor zu untersuchen, wurden diese NHOs an π-Triarylboran-Akzeptoren (A) gebunden, wodurch die Donor(D)-π-A-Verbindungen 1-3 erhalten wurden. Zusätzlich wurde zum Vergleich das Enamin π-Donoranalogon (4) synthetisiert. Studien zur UV/Vis-Absorption zeigen für die NHO-haltigen Borane eine stärkere Rotverschiebung als für das Enamin-Analogon, welches ein Verwandter von CAACs ist. Die rotverschobene Absorption der NHO-haltigen Borane weist auf kleinere Energielücken bei den NHO-haltigen Boranen als bei den CAAC-haltigen Boranen hin. Des Weiteren zeigen Lösungsmittel-abhängige Emissionsstudien, dass die Verbindungen 1-4 ein moderates intramolekulares Ladungstransfer(ICT)-Verhalten aufweisen. Elektrochemische Untersuchungen zeigen, dass die NHO-haltigen Borane extrem niedrige reversible Oxidationspotentiale aufweisen (z.B. für 3, E1/2ox = –0,40 V vs. Fc/Fc+ in THF), was auf die elektronenreiche Eigenschaft der NHOs hinweist. Darüber hinaus wurden TD-DFT-Berechnungen für diese vier D-π-A-Borane durchgeführt. Die Ergebnisse zeigen, dass die jeweiligen LUMOs von 1-4 nur einen geringen Unterschied zueinander aufweisen, die HOMOs von 1-3 jedoch viel stärker destabilisiert sind als die des enaminhaltigen 4, was mit den elektrochemischen Untersuchungen übereinstimmt und die stärkere Donorfähigkeit der NHOs bestätigt. 2 Kapitel 2 Seit Beginn dieses Jahrhunderts hat die Chemie von (Hetero)aren-kondensierten Borolen zunehmendes Interesse geweckt. (Hetero)aren-kondensierte Borole weisen eine starke Lewis-Acidität, ausgeprägte Fluoreszenzeigenschaften, starke Elektronenakzeptor-fähigkeiten, etc. auf. Ihre Chemie wurde jedoch bislang nur wenig untersucht und es gibt kaum Übersichten zu ihren Eigenschaften, entweder als Teil von Übersichtsarbeiten über "freie" Borole oder über bordotierte polyzyklische aromatische Kohlenwasserstoffe (PAK). In diesem Kapitel wird die Chemie von (Hetero)aren-kondensierten Borolen von den Grundlagen bis zu ihren sehr unterschiedlichen Anwendungen behandelt. Es umfasst: 1) Synthetische Methoden  Sowohl historische als auch kürzlich entwickelte Strategien für die Synthese von kondensierten Borolen. 2) Stabilitäten  Ein Vergleich verschiedener kinetischer Schutzstrategien. 3) 9-Borafluorene mit fluoriertem Rückgrat  Anwendung als Lewis-Säure, Bildung von Ionenpaaren mit Cp2Zr(CH3)2 und Anwendung als Aktivatoren für die Polymerisation, Aktivatoren von H2 und andere verwandte Anwendungen. 4) Donor-Akzeptor 9-Borafluorene  mögliche Anwendungen als F– "Einschalt"-Sensoren, als elektronenakzeptierende Einheit für die organische (Opto-)Elektronik, bipolare Transportmaterialien, TADF-Materialien und verschiedene Funktionalisierungsstrategien. 5) Heteroaren-kondensierte Borole  Gesteigerte Antiaromatizität, einzigartiger Koordinationsmodus und interessante Eigenschaften. 6) Intramolekulare dative Bindung in 9-Borafluorenen  Bindungsbruch-induzierter intramolekularer Ladungstransfer (BICT), BICT-induzierte große Stokes-Verschiebungen und duale Emissionen, Anwendung als ratiometrischer Sensor. 7) 9-Borafluoren-basierte Hauptkettenpolymere  Anwendung in der Polymerchemie und deren charakteristische Eigenschaften, z.B. als Sensoren für gasförmiges NH3. 8) Elektrochemie  Ein Vergleich der Elektronenakzeptorfähigkeit unterschiedlicher funktionalisierter kondensierter Borole durch elektrochemische Untersuchungen. 9) Chemische Reduktion von kondensierten Borolen  Stabile Radikalanionen und Dianionen von kondensierten Borolen und deren Eigenschaften. 10) Dreifach koordinierte Borafluorenium-Kationen  Kationische 9-Borafluorene und ihre spannenden Eigenschaften, wie z.B. die reversible thermische Schaltbarkeit durch Farbe in THF. Am Ende des Kapitels werden Schlussfolgerungen gezogen und ein Ausblick zur weiteren Chemie, etwaigen Eigenschaften sowie möglichen Anwendungen gegeben. Ferner werden Vorschläge zu Feldern gemacht, die weitere Untersuchungen bedürfen. 3 Kapitel 3 Um elektronenarme Arene mit Borolen zu kondensieren, wurden zwei elektronenarme Phenylpyridyl-kondensierte Borole, [TipPBB1]4 und TipPBB2, hergestellt. [TipPBB1]4 ist ein weißer Feststoff, der einen einzigartigen Koordinationsmodus aufweist. Sowohl im Festkörper als auch in Lösung (1H DOSY) liegt ein Tetramer mit einem Hohlraum vor. Das Borzentrum von TipPBB2 ist im Festkörper 4-fach koordiniert, was durch ein Festkörper 11B{1H} nachgewiesen wurde. RSHE/MAS-NMR-Studien zeigten aber, dass das System in Lösung dissoziiert, was zu einer 3-fach koordinierten-Borolspezies führt. [TipPBB1]4 zeigt zwei Reduktionsprozesse, die den Phenylpyridylkernen zugeschrieben werden. TipPBB2 zeigt ebenfalls zwei Reduktionsprozesse mit dem ersten Halb- Reduktionspotential von E1/2red. = –1,94 V. Die Elektronenakzeptorfähigkeit von TipPBB2 ist somit weitgehend verbessert und mit der von FMesBf vergleichbar. Diese verbesserte Elektronenakzeptorfähigkeit ist auf den elektronenziehenden Effekt der Pyridylgruppe zurückzuführen. TipPBB2 zeigt konzentrations- und temperaturabhängige duale Fluoreszenz in Lösung. Mit sinkender Temperatur nimmt die Emissionsintensität ab. Es liegt die Vermutung nahe, dass die duale Fluoreszenz durch ein Gleichgewicht zwischen 3-fach koordinierten-TipPBB2 und einem schwachen intermolekularen Addukt von TipPBB2 über eine B–N-Bindung verursacht wird. Diese Hypothese wurde durch Lebenszeitmessungen bei verschiedenen Konzentrationen, Niedrigtemperatur-Anregungsspektren, Niedrigtemperatur-1H-NMR-Spektren und Lebenszeitmessungen nach Zugabe von DMAP zu einer Lösung von TipPBB2 zur Simulation der 4-fach koordinierten-TipPBB2-Spezies weiter untermauert. Interessanterweise zeigt das Verhältnis der relativen Prozentsätze der beiden Lebenszeiten eine lineare Beziehung mit der Temperatur; daher könnte TipPBB2 als Fluoreszenzthermometer dienen. Darüber hinaus wurden theoretische Studien zu TipPBB2 durchgeführt und zwei Modellverbindungen ((BMe3)TipPBB1(NMe3) und (BMe3)TipPBB2(NMe3)) wurden untersucht, um [TipPBB1]4 bzw. das intermolekular-4-fach koordinierte TipPBB2 zu simulieren. Die BMe3-Gruppe koordiniert als Lewis-Säure an Pyridin und die NMe3-Gruppe als Lewis-Base an das Borzentrum des Borols. Die theoretischen Studien weisen darauf hin, dass das HOMO von TipPBB2 an der Tip-Gruppe lokalisiert ist, was im Gegensatz zu den entsprechenden Borafluoren-Derivaten steht, bei denen sich die HOMOs auf den Borafluoren-Kernen befinden. 4 Kapitel 4 Zwei Derivate von Phenylpyridyl-kondensierten Borolen wurden durch Funktionalisierung der Pyridylgruppe an zwei unterschiedlichen Positionen hergestellt, zum einen eine elektronenreiche Dihydropyridin-Einheit (Verbindung 10) und zum anderen ein elektronenarmes N-Methylpyridinium-Kation (Verbindung 11). Beide Verbindungen wurden vollständig charakterisiert. Das 11B-NMR-Signal von Verbindung 10 wurde bei 58,8 ppm in CDCl3 beobachtet, was auf eine starke Konjugation zwischen dem Boratom und der Dihydropyridin-Einheit schließen lässt. Verbindung 11 zeigt eine reversible Koordination zu THF, was durch NMR-Studien bestätigt wurde. Im Vergleich zu anderen 2,4,6-Triisopropylphenyl-geschützten 9-Borafluorenen, die nur an CH3CN oder DMF koordinieren, weist die Koordination des schwächeren und voluminöseren THF zu Verbindung 11 auf ein extrem elektronenarmes Borzentrum in Verbindung 11 hin. Der Elektronenreichtum der Dihydropyridin-Einheit von Verbindung 10 wurde durch sein Oxidationspotential (Epc = +0,37 V) bestätigt. Aufgrund der starken Konjugation des Dihydropyridinteils mit dem Boratom verschiebt sich das Reduktionspotential von Verbindung 10 kathodisch und ist negativer als –2,5 V. Verbindung 11 zeigt drei Reduktionsprozesse mit dem ersten reversiblen Reduktionspotential bei Ered1/2 = –1,23 V, das im Vergleich zu dem der Vorstufe (TipPBB2) oder ihres Gerüstes 1-Methyl-2-phenylpyridin-1-ium-Triflat (12) signifikant anodisch verschoben ist. Dieses signifikant anodisch verschobene Reduktionspotential bestätigt das Elektronendefizit von Verbindung 11. Photophysikalische Studien zeigen, dass der niedrigste Energieübergang von Verbindung 10 eher ein lokal angeregter (LE) Übergang ist und Verbindung 11 einen polarisierten Grundzustand aufweist. Darüber hinaus wurden für beide Verbindungen theoretische Studien durchgeführt. Die Elektronenverteilung des HOMO von Verbindung 10 belegt die starke Konjugation zwischen dem Boratom und der Dihydropyridin-Einheit im Grundzustand. Eine sehr niedrige LUMO-Energie wurde durch theoretische Studien ermittelt, die das Elektronendefizit von Verbindung 11 bestätigt. 5 Kapitel 5 Inspiriert durch die zunehmende Elektronenakzeptorfähigkeit mit wachsender Anzahl elektronenziehender Gruppen am Boratom versuchten wir, die Eigenschaften eines Bis(pyridyl)arylborans zu untersuchen. Bei unserem Versuch, ein Bis(pyridyl)arylboran zu synthetisieren, erhielten wir jedoch einen Bis(2-pyridyl)methoxyborat-Li+-Komplex, der als Dimer sowohl in Lösung als auch im festen Zustand vorliegt. Im Festkörper ist die Verbindung [16]2 ein Dimer, das zwei Bis(2-pyridyl)methoxyborat-Einheiten enthält welche durch zwei Lithiumkationen verbunden sind. Jedes Lithiumkation koordiniert an eine Methoxygruppe und an zwei Pyridylgruppen, jeweils eine von jedem der beiden Bis(2-pyridyl)methoxyborat-Anionen. Die Parameter von [16]2 wurden mit anderen Bis(2-pyridyl)methoxyborat-stabilisierten Pt(IV)-Komplexen, Bis(2-pyridyl)hydroxylborat-stabilisierten Ru(II)-Komplexen und dem Dimer von EtAl(OMe)(2-pyridyl)2Li verglichen. Um den Koordinationsmodus in Lösung zu bestätigen, wurde eine 1H-DOSY-Studie in CD2Cl2 durchgeführt. Der aus den Daten ermittelte van-der-Waals-Radius stimmt gut mit dem Ergebnis aus den Festkörperuntersuchungen überein und beweist somit, dass das Dimer von 16 in Lösung persistent ist. Schließlich wurde mit verschiedenen Lewis-Säuren (z.B. TMSCl, BF3•Et2O, AlCl3, HCl) versucht, die Methoxygruppe von [16]2 abzuspalten. Wir beobachteten jedoch entweder eine Zersetzung oder selektive Abspaltung der Tip-Gruppe oder gar keine Reaktion und nicht die Abspaltung der Methoxy-Gruppe von Bor. KW - Triarylborane KW - Borole KW - Pyridinderivate KW - Heterocyclische Verbindungen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-217175 ER - TY - THES A1 - Schmidt, Uwe T1 - Sandwich- und Halbsandwich-substituierte Diborene – Synthese, Eigenschaften und Reaktivität T1 - Sandwich- and half sandwich-substituted diborenes – synthesis, properties and reactivity N2 - Innerhalb der vorliegenden Arbeit ist es gelungen, durch das Einführen von Cymantrenylresten neue Diborene darzustellen, welche Halbsandwich-Substituenten tragen und somit das Substitutionsmuster von basenstabilisierten Diborenen um eine weitere Verbindungsklasse zu erweitern. Neben Cymantrenylresten gelang es auch, Ferrocenylreste als weitere Substituenten in entsprechende Diborensysteme einzuführen. Über die Darstellung neuer Diborensysteme hinaus, waren Reaktivitätsstudien am Diboraferrocenophan 29 ebenso ein wesentlicher Bestandteil der vorliegenden Arbeit. Es konnte gezeigt werden, dass 29 mit kleinen Lewis-Basen, Element-Wasserstoff-Verbindungen und Hydrierungsreagenzien zur Reaktion gebracht werden kann. N2 - The work in this project resulted in the synthesis of new diborenes with cymantrenyl substituents. With these half-sandwich substituents it was possible to expand the substitution pattern of base-stabilized diborenes by further examples. In addition to cymantrenyl substituents, ferrocenyl substituents were introduced into the corresponding diborene systems. In addition to the synthesis of new diborene systems, reactivity studies on the diboraferrocenophane 29 constituted another major component of the present work. It was shown that 29 reacts with small Lewis-bases, element-hydrogen compounds, and hydrogenation reagents. KW - Diborene KW - Mehrfachbindung KW - Cymantren KW - Ferrocen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234601 ER -