TY - THES A1 - Knauer, Michael T1 - Aufklärung der Konstitution und Konfiguration von Sekundärmetaboliten und Syntheseprodukten mittels NMR, MS, HPLC, CD und ORD sowie Beiträge zur Totalsynthese bioaktiver axial chiraler Naturstoffe T1 - Elucidation of the conformations and configurations of secondary metabolites and synthetic products with NMR, MS, HPLC, CD and ORD as well as contributions to the total saynthesis of bioactive axially chiral natural products N2 - Im Laufe der Evolution entwickelten Pflanzen, Bakterien, Pilze und Tiere eine Vielzahl von Signal-, Boten- und Abwehrstoffen. Diese für die Organismen oft lebensnotwendigen Sekundärmetabolite werden von den jeweiligen Produzenten oft sehr effizient und teilweise auch hoch stereoselektiv produziert. Die Effizienz und Selektivität, mit denen diese Stoffe mit den in der Natur zur Verfügung stehenden biosynthetischen Mitteln hergestellt werden, ist für Chemiker im Labor, trotz eines breiten Methodenrepertoires, eine große Herausforderung und oft gelingt die Laborsynthese nur über viele Stufen sowie in geringen Ausbeuten und/oder mit schlechten Enantio- oder Diastereoselektivitäten. Daher wird in der chemischen Synthese immer wieder die Neuentwicklung und Erweiterung von Methoden vorangetrieben. Neben der Synthese im Labor ist auch die Untersuchung von Biosynthesewegen sowie die Charakterisierung der dafür verantwortlichen Enzyme ein interessantes Forschungsgebiet, um von der Natur zu lernen und diese Erkenntnisse für die Entwicklung neuer Synthesestrategien und Methoden zu nutzen. Viele der bislang isolierten Verbindungen zeigen neben den für die produzierenden Organismen wichtigen Wirkungen auch Aktivitäten gegen für Menschen gefährliche Krankheitserreger. Daher ist die Isolierung und Strukturaufklärung neuer bioaktiver Naturstoffe als Leitstrukturen für neue Medikamente ein lohnendes Ziel für Wissenschaftler. In den letzten Jahren wurden aber immer häufiger bereits bekannte Verbindungen isoliert. Zur Vermeidung solcher Mehrfachisolierung werden auch die analytischen Methoden zur Identifikation und Strukturaufklärung stetig verbessert Einen wichtigen Stellenwert hat hierbei die Kopplung von Messgeräten wie z.B. MS oder NMR mit chromatographischen Anlagen wie GC, HPLC oder UPLC eingenommen. Die Kombination von Flüssigchromatographie-Anlagen mit chiroptischen Detektoren wie CD-Spektrometern erlaubt hierbei manchmal sogar die Zuordnung von Absolutkonfigurationen direkt aus dem Rohextrakt. Ziel der vorliegenden Arbeit war einerseits die Anwendung neuer Methoden bei der Entwicklung von Syntheserouten zu axialchiralen Naturstoffen und andererseits die Aufklärung der Konstitution und Konfiguration von Naturstoffen und synthetischen Verbindungen sowie die Untersuchung von Biosyntheseintermediaten. N2 - In the course of evolution many plants, bacteria, fungi and animals developed a variety of semiochemicals and antibodies. These secondary metabolites are often indispensable for life of the respective organisms and are produced in an efficient and highly stereo selective way. The efficiency and selectivity of 'nature' is a great challenge for chemists in the laboratory. Although a great variety of methods have been developed to mimic nature, in many cases the chemical synthesis is less stereo selective and/or yields are far below that of the biosynthetic pathway. The development and enhancement of methods is thus a great intention of modern natural chemistry. Beside the total synthesis, the investigation of biosynthetic pathways and the identification of the respective enzymes is a highly interesting field of research. Learning from nature can help to develop new synthetic strategies and methods. Many of the isolated compounds do not only possess the intended biological activity, but have also outstanding effects against pathogens of human diseases. Therefore the isolation and structural elucidation of bioactive compounds as lead structures for new drugs is a challenging and rewarding goal. Despite the great variety and number of natural sources of secondary metabolites, the more and more frequent isolation of already known compounds has become a large problem. To avoid such repeated isolations the methods for the identification and structural elucidation of natural products continuously have been improved. Important contributions are the hyphenation of analytical detectors like MS or NMR with chromatographic facilities e.g. GC, HPLC or UPLC. Combination of liquid chromatography with chiroptical methods like CD spectroscopy sometimes allows the assignment of absolute configurations direct from the extract. The aims of this PhD-thesis were the use of new methods in the synthesis of axially chiral natural products, the elucidation of structures and stereo structures of secondary metabolites and synthetic compounds and the investigation of biosynthetic intermediates. KW - Totalsynthese KW - Totalsynthese KW - Axiale Chiralität KW - Bioaktive Verbindungen KW - Strukturaufklärung KW - total synthesis KW - Sekundärmetabolit KW - axial chirality KW - Biosynthese KW - structural elucidation KW - total synthesis KW - secondary metabolites KW - axial chirality KW - biosynthesis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-70990 ER - TY - THES A1 - Häuser, Tobias T1 - Stereoselektive Synthese von alpha-Hydroxycarbonsäuren und alpha-Hydroxyestern über Multiheteroatom-Cope-Umlagerungen und Studien zur Entwicklung neuer, chiraler Organokatalysatoren als L-Prolin-Ersatzstoffe T1 - Stereoselective Synthesis of alpha-Hydroxy Carboxylic Acids and alpha-Hydroxy Esters using a multiheteroatom cope rearrangement and development of novel, chiral organocatalysts as L-Prolinesurrogates N2 - Einleitung: Die α-Hydroxycarbonsäuren 2 sind nicht nur wichtige chirale Bausteine für die organische Synthese,[20–25] sondern ebenfalls für den Menschen von großer Bedeutung aufgrund ihrer vielfältigen Anwendungen in der Lebensmittelbranche, Kosmetikindustrie und Medizin.[13–15] Aus diesen Gründen ist ein effizienter Zugang auch zu enantiomenreinen Säuren 2 notwendig. Viele natürlich vorkommende Vertreter sind aus dem chiral pool isolierbar, doch gerade für wissenschaftliche Zwecke sind häufig spezielle Strukturen von Interesse, die nur synthetisch darstellbar sind. Deshalb wurden, basierend auf unterschiedlichen Ansätzen, zahlreiche stereoselektive Routen zu α-Hydroxycarbonsäuren 2 entwickelt.[26–79] Eine schnelle und zugleich breit anwendbare Methode, 2 durch Hydroxylierung unfunktionalisierter Carbonsäuren 20 zu synthetisieren, sucht man jedoch vergebens. Das Ziel des ersten Teils dieser Arbeit bestand in der Entwicklung einer stereoselektiven Eintopfsynthese zur α-Hydroxylierung α-unfunktionalisierter Carbonsäurederivate 20 ... Fazit: Mit der MHACU von chiralen O-acylierten Oxazolin-N-oxiden (S)-37 wurde eine schnelle und einfache Eintopf-Synthese für α-Acyloxyoxazoline (S,S)-39, α-Hydroxymethylester (S)-30 und -säuren (S)-2 ausgehend von unfunktionalisierten Orthoestern 29 erarbeitet, die exzellente Diastereomeren- und Enantiomerenüberschüsse erlaubt (94–98% de/ee). Einleitung zum zweiten Teil der Arbeit: L-Prolin [(S)-222] gilt als einer der bedeutendsten Organokatalysatoren überhaupt und besticht durch seine strukturelle Einfachheit und seine erstklassigen katalytischen Eigenschaften.[230–232] Zudem stehen bei keinem zweiten Katalysator die materielle Verfügbarkeit und die chemische Anwendbarkeit in einem so idealen Verhältnis. Für einen Grundlagenforscher ist es daher eine besonders interessante Aufgabe, strukturelle Merkmale von L-Prolin [(S)-222] mit Erkenntnissen aus mechanistischen Untersuchungen zu verschmelzen, um so neue, noch leistungsstärkere Katalysatoren zu entwickeln. Fazit: Die vorgelegten Konzepte zur Verbesserung der Reaktivität von Pyrrolidin-basierten Katalysatoren erschienen zwar aussichtsreich, jedoch lieferten die bisherigen Umsetzungen noch keine brauchbaren Ergebnisse. Die in diesem Rahmen synthetisierten Aminosäuren und Isoxazolidine besaßen nur sehr geringe katalytische Aktivitäten. Weitere Arbeiten, zum Beispiel Veränderungen an den Katalysatorstrukturen, sind nötig, um eine erfolgreiche Umsetzung dieser Konzepte noch zu realisieren. N2 - Introduction: α-Hydroxy carboxylic acids 2 are not only important building blocks in organic chemistry,[20–25] they are also of high interest for humanity because of their manifold applications in food, cosmetic, and medical industry.[13–15] For these reasons, an efficient access to enantiomerically enriched acids 2 is necessary. Many naturally occurring α-hydroxy acids are accessible from the chiral pool, but more special structures have to be prepared by chemical synthesis. Hence, quite a number of stereoselective procedures has been developed for the preparation of α-hydroxy carboxylic acids 2,[26–79] but a quick and highly substrate tolerant method for the direct hydroxylation of α-unfunctionalized carboxylic acids does not yet exist. The aim of the first part of this work was the development of a stereoselective one-pot procedure for the α-hydroxylation of α-unfunctionalized carboxylic acid derivatives 20. This method had to be optimized in termes of yield and stereoselectivity, and also the substrate tolerance had to be studied. An extension to a variable α-functionalization of 20, giving, for example, α-amino acids 8, was planned. Conclusion: A fast and substrate tolerant one-pot procedure to oxazolines (S,S)-39 and α-hydroxy methyl esters (S)-30 and acids (S)-2 from unfunctionalized ortho esters 29 has been developed, using a highly stereoselective (94–98% de/ee) MHACU of O-acylated oxazoline-N-oxids (S)-37 as the key step. Introduction of the 2. part: L-Proline [(S)-222] is probably the most important organocatalyst known so far because of its structure simpleness and its brilliant catalytic qualities.[230–232] There is not any other catalyst that is so easily available and, at the same time, so broadly applicable. It is therefor a very interesting task for a scientist to combine the structural properties of L-proline [(S)-222] with the up-to-date knowlegde from mechanistic studies and to develop new, more powerful catalysts. Conclusion: The presented concepts, targeting an improvement of the reactivity of pyrrolidine-based catalysts, were promising, but any convincing results were not achieved so far, since the synthesized amino acids and isoxazolidines possessed an insufficient catalytic potential. Further attempts, in particular further modifications in the compounds' structures, are necessary to successfully realize this project. KW - Hydroxycarbonsäuren KW - Hydroxycarbonsäureester KW - Stereoselektive Synthese KW - Cope-Umlagerung KW - Multiheteroatom-Cope-Umlagerungen KW - Organokatalysatoren KW - alpha-Hydroxy carbon acids KW - Multiheteroatom-Cope-Rearrangement KW - Organo catalysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57306 ER - TY - THES A1 - Liang, Yuejiang T1 - Deagglomerierung und Oberflächenfunktionalisierung von Nanodiamant mittels thermochemischer und mechanochemischer Methoden T1 - Deagglomeration and surface modification of nanodiamond via thermochemical and mechanochemical method N2 - Nanodiamant weist aufgrund seiner herausragenden mechanischen, optischen und biokompatiblen Eigenschaften ein enormes Potential auf. Für eine erfolgreiche Anwendung muss dieser jedoch zunächst desagglomerisiert und an seiner Oberfläche funktionalisiert werden. In dieser Arbeit werden zwei unterschiedlichen Methoden zur Deagglomerierung und Oberflächenfunktionalisierung vorgestellt. Im ersten Teil wird die thermochemische Methode beschrieben, um den ungewöhnlich stark agglomerierten Detonationsnanodiamant zu deagglomerieren. Dabei wird die Strategie verfolgt, den Nanodiamant erst durch eine thermische Behandlung im Vakuum die vorhandenen Oberflächengruppe zu entfernen, π-Bindungen zu etablieren und dann dessen Oberfläche durch kovalente Bindungen zu modifizieren. Im zweiten Teil wird eine mechanochemische Methode für die Deagglomerierung und Oberflächenfunktionalisierung vorgestellt. Dabei wird ein völlig neuer Ansatz (BASD-Verfahren) entwickelt. Die Ultraschallbehandlung in Kombination mit zusätzlichen Mikrokeramikpartikeln eignet sich hervorragend, um Nanodiamant-agglomerate aufzubrechen. Zwei unterschiedliche Reaktionen mit zwei unterschiedlichen Nanodiamantsorten werden getestet: Eine einfache Kondensationsreaktion durch Silanisierung und eine Radikalreaktion über das Diazoniumsalz. In weiteren Experimenten kann gezeigt werden, dass sich die zuerst vorgestellte thermochemische Methode auch eignet, um aus fluoreszierenden NV-Nanodiamant kolloidalen NV-Nanodiamant mit funktionellen Gruppen herzustellen. Der letzte Teil der vorliegenden Arbeit beschäftigt sich mit der Herstellung von Nanodiamanten aus Diamantfilmen mit Hilfe des Top-down Ansatzes, da der gezielte und kontrollierte Aufbau der Gitterstruktur des Diamanten sowie die kontrollierte Einführung bisher nur durch CVD oder Ionenimplantationstechnik möglich ist. N2 - Nanodiamond exhibits an enormous potential due to its outstanding mechanical, optical and biocompatible properties. However, a successful application must begin with deagglomerated and functionalized particles. In this study, two different methods for deagglomeration and surface functionalization are introduced. The first part deals with a thermochemical method for deagglomeration of unusual tight agglomerated detonation nanodiamond. Thereby, a new strategy is developed, in which the nanodiamond is partially graphitized by annealing in vacuum in order to remove the present surface groups and establish π-Bonds, followed by surface-modification through covalent grafting. In the second part, a mechanochemical method for the deagglomeration and surface functionalization is presented. A completely new approach (BASD method) is developed. Ultrasonic treatment in combination with additional micro-ceramic particles is excellently suited for breaking up agglomerates of nanodiamond.Two different reactions with two different types of nanodiamond are tested: A simple condensation reaction by silanization and a radical reaction of the diazonium salt. Further experiments show that the first presented thermochemical method is also suitable for production of colloidal nanodiamond with functional groups from fluorescent NV-nanodiamond. In the last part of the present work, the production of nanodiamonds from diamond films by means of a top-down approach is described. So far, only the CVD production of diamond enables a direct access to a structured diamond material. KW - Nanopartikel KW - Synthesediamant KW - Aggregat KW - Funktionalisierung KW - Kolloid KW - Nanodiamant KW - Deagglomerierung KW - nanodiamond KW - deagglmeration KW - surface functionalisation Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56296 ER - TY - THES A1 - Jarre, Gerald T1 - Funktionalisierte Nanodiamanten - Diels-Alder-Reaktion auf Nanodiamantpartikeln T1 - Functionalized Nanodiamonds - Diels Alder reaction on nanodiamond particles N2 - Für Diamantpartikel basiert diese Funktionalisierungschemie auf den bereits vorhanden Oberflächengruppen, die durch die Synthese und Reinigung entstanden sind. Die stabilste Anbindung wäre eine C-C-Verknüpfung der Diamantatome auf der Oberfläche mit den organischen Reagenzien. Um diese Verknüpfung zu erreichen, wurde die Oberfläche mittels Diels-Alder-Reaktion funktionalisiert. Grundvoraussetzung hierfür ist eine Oberfläche, die über eine ausreichende Menge an C=C-Doppelbindungen verfügt. Dies wurde durch eine thermische Behandlung erreicht. Die gewonnenen Ergebnisse zeigen, dass ab einer Behandlungstemperatur von 750 °C keine funktionellen Gruppen durch die eingesetzten Analysemethoden mehr nachgewiesen werden können. Die Elementaranalyse der einzelnen Proben zeigt einen deutlichen Anstieg des Kohlenstoffgehaltes. Nach erfolgreicher thermischer Behandlung des Diamanten wurde durch die Verwendung von Cyclopentadien und Anthracen als Dien gezeigt, dass eine Funktionalisierung über eine Diels-Alder-Reaktion generell möglich ist. Daher wurde als alternatives Dien ein o-Chinodimethan eingesetzt. Hierzu wurde eine systematische Untersuchung der Umsetzung der unterschiedlichen thermisch behandelten Proben mit α,α’-Dibrom-o-xylol durchgeführt. Hierdurch wurde gezeigt, dass der Ausgangsdiamant bei mindestens 750 °C behandelt werden muss, um eine messbare Oberflächenbelegung zu erhalten. Im Anschluss wurde die Funktionalisierbarkeit der eingeführten Arylgruppen überprüft. Durch die Einführung unterschiedlicher funktioneller Gruppen ist es dann möglich, Moleküle für spezielle Anwendungen anzubinden. Durch die Anwendung der klassischen Aromatenchemie war es möglich, die aromatischen Oberflächen zu nitrieren und sulfonieren. Die Sulfonsäuregruppe konnte partiell zum Thiol reduziert werden. Durch Umsetzung dieser Thiolgruppen war es möglich, einen mannosemodifizierten sowie einen farbstoffmodifizierten Diamanten herzustellen. Da die nachträgliche Einführung von Carboxylgruppen mit hohem synthetischem Aufwand verbunden ist, wurde alternativ ein carboxyltragender Vorläufer mit dem thermisch behandelten Diamant umgesetzt. Hierbei wurde eine Oberflächenbelegung von ca. 0.8 mmol g-1 erreicht (Ausgangsdiamant thermisch behandelt bei 750 °C). Im Anschluss wurde die Säuregruppe mit einem einfach geschützten Diamin weiterfunktionalisiert. Hierbei wurden unterschiedliche Methoden zur Amidbildung getestet. Als effektivste Methode stellte sich die Synthese über ein Säurechlorid heraus. Infolgedessen war eine weitgehende Umsetzung (ca. 94 - 88 %) der Säuregruppe möglich. Eine weitere wichtige funktionelle Gruppe für die Anbindung größerer Einheiten stellen die Amine dar. Diese lassen sich einfach darstellen, z. B. durch Reduktion von Cyanogruppen. Daher wurde 2,3-Bis-(brommethyl)-5,6-dicyanopyrazin als Edukt für die Funktionalisierung eingesetzt. Nach anschließender Reduktion der Cyanogruppen wurden primäre Amine erhalten. Die so erzeugte Aminogruppe wurde mit Biotin weiter funktionalisiert. Die bisher eingesetzten o-Chinodimethane sind ausschließlich durch 1,4-Eliminierung zugänglich. Eine sinnvolle Alternative zu diesem Vorläufer ist die Verwendung eines Cyclobutenderivates. Der Vorteil liegt in einer einfacheren Reinigung des Produktdiamanten. Als Testverbindung wurde 2,4-Bis-(methylsulfonyl)-5,6-dihydro-cyclobuta-[d]-pyrimidin verwendet. Nach erfolgreicher Umsetzung mit dem Diamanten wurden die Thioethergruppen in Sulfone überführt und in 2-Position wurde das Sulfon gegen eine Aminogruppe ausgetauscht. Neben den durchgeführten Funktionalisierungsreaktionen wurde eine nasschemische Nachweismethode zur Quantifizierung von primären Aminen entwickelt. Ein Vorteil des Verfahrens ist, dass der Nachweis auf einfache Weise durchführbar ist und nur 1 – 2 mg Diamantprobe nötig sind. Die gewonnen Ergebnisse zeigen, dass durch den Nachweis verlässliche Angaben über die genaue Aminmenge erhalten werden. N2 - For nanodiamond particles the functionalisation chemistry is based on the already existing surface groups, which were introduced during synthesis and cleaning. The most stable grafting would be a C-C coupling of the diamond atoms on the surface with organic reagents. To achieve this linkage the surface is func-tionalized via Diels-Alder reaction. Basic prerequisite for this is a surface which has a sufficient amount of C=C double bonds. This was achieved by thermal treatment. The obtained results show, that above a treatment temperature of 750 °C no functional groups can be detected anymore by the used analytic methods. The elemental analysis of each sample shows a significant increase in carbon content. This is also an indication of a successful removal of most oxygen containing surface groups. After successful thermal treatment of the diamond it was shown by the usage of cyclopentadiene and anthracene, that in general a functionalization via Diels-Alder reaction is possible. Because of this as an alternative diene an o-quinodimethane was applied. For this purpose a systematic study of the reaction of the different thermally annealed diamond samples with α,α’-di-bromo-o-xylene was performed. This has shown that pristine diamond has to be treated at least at 750 °C to obtain a measurable surface coverage. Subsequently, the functionalization of the introduced aryl groups was investigated. By the introduction of different functional groups it is possible to bind molecules for specific applications. By applying classical aromatic chemistry, it was possible to nitrate and sulfonate the aromatic moieties. The sulfonic acid was partially reduced to a thiol. By reacting the thiol group it was possible to synthesize a mannose and dye modified nanodiamond Because the subsequent introduction of carboxylic groups is connected with a high synthetic effort an alternative carboxylic group carrying precursor was reacted with thermally annealed diamond. A surface coverage of 0.8 mmol g-1 was achieved (pristine diamond annealed at 750 °C). Subsequently, the carboxylic group was modified by introducing a Boc-protected diamine. Different methods for amide formation have been tested. As the most effective method the reaction using an acid chloride as an intermediate was identified. Using this coupling method, an almost complete conversion (about 94 – 88 %) of the acid group was possible. Another important functional group for the grafting of larger moities are the amines. They can easily be formed by e. g. the reduction a cyano group. Here 2,3-bis-(bromomethyl)-5,6-dicyanopyrazine was used as a precursor for the functionalization of the diamond. After subsequent reduction of the cyano groups, primary amines were obtained. The generated amino group have been reacted with biotin. So far the used o-quinodimethanes were solely accessible by 1,4-elimination. A reasonable alternative for these precursors is the use of a cyclobutene derivative. The advantage is an easier purification of the product. As a test compound 2,4-bis(methylsulfonyl)-5,6-dihydrocyclobuta-[d]-pyrimidine was used. After reaction with the diamond the thioether group was transformed into sulfones and in the 2-position the sulfone was replaced by an amino group. In addition to the functionalization reactions carried out in this work, a wet chemical method was developed for the quantification of primary amines on the diamond surface. An advantage of the developed method is that it can be easily carried out and only 1 - 2 mg of the diamond sample is needed. The obtained results show that through this detection method a reliable value of the exact amount of amine groups can be made. KW - Funktionalisierung KW - Festkörperoberfläche KW - Diels-Alder-Reaktion KW - Chinodimethane KW - Synthesediamant KW - Nanodiamant KW - Nanodiamond KW - Functionalisation KW - Diels-Alder reaction KW - o-Quinodimethane Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56229 ER - TY - THES A1 - Meinhardt, Thomas T1 - Effiziente Oberflächen-Funktionalisierung von Nanodiamant durch die Click-Reaktion von Alkinen und Aziden T1 - Efficient surface functionalization of nanodiamond via click reaction of alkynes and azides N2 - In dieser Arbeit wurde die Kupfer(I)-katalysierte Cycloaddition von Alkinen und Aziden ("Click-Chemie") als effiziente, vielseitige und milde Reaktion für die Funktionalisierung von Nanodiamantpartikeln etabliert. Es wurden verschiedene Alkin- oder Azid-funktionalisierte Nanodiamantsysteme hergestellt und deren Reaktivität in Click-Reaktionen anhand vielfältiger Beispiele demonstriert. Hierzu wurden neben einfachen Testverbindungen auch komplexere Substanzen (z. B. ein Mannose-Derivat, Polytriazole, Fluoreszenzfarbstoffe, ein Thiazolium-Organokatalysator) durch Triazolsynthese immobilisiert. Zusätzlich wurde eine Methode entwickelt, die die Herstellung funktionalisierter und vollständig dispergierter Nanodiamant-Primärteilchen ermöglicht, wobei gezeigt wurde, dass dieser Weg auch für die Funktionalisierung durch Click-Chemie geeignet ist. Die Analyse der Nanodiamantpartikel erfolgte u. a. durch FT-IR, TGA, Elementaranalyse, Partikelgrößen- und Zetapotentialbestimmung, NMR, HR-TEM, UV / Vis sowie Fluoreszenzspektroskopie und -mikroskopie. N2 - In this work, the copper(I)-catalyzed cycloaddition of alkynes and azides ("click chemistry") was established as an efficient, versatile and mild reaction for the functionalization of nanodiamond particles. Different alkyne- or azide-functionalized nanodiamond systems were prepared and their reactivity in click reactions was demonstrated by various examples. For this purpose, simple compounds as well as more complex substances (e. g. a mannose derivative, polytriazoles, fluorescent dyes, a thiazolium organocatalyst) were immobilized via triazole synthesis. In addition, a method was developed that allows for the preparation of functionalized and completely dispersed nanodiamond primary particles. It was shown that this strategy is also suitable for the functionalization via click chemistry. The nanodiamond particles were analyzed by FT-IR, TGA, elemental analysis, particle size and zeta potential measurements, NMR, HR-TEM, UV / Vis, fluorescence spectroscopy and microscopy. KW - Funktionalisierung KW - Diamant KW - Click-Chemie KW - Partikel KW - Nanodiamant KW - nanodiamond KW - functionalization KW - click chemistry KW - particles Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66410 ER -