TY - THES A1 - Engelbauer, Manuel T1 - Global assessment of recent UNESCO Biosphere Reserve quality enhancement strategies and interlinkages with other UNESCO labels T1 - Globale Bewertung der jüngsten Strategien zur Qualitätssteigerung von UNESCO-Biosphärenreservaten und deren Verknüpfungen mit anderen UNESCO-Labeln N2 - In 1995, the Second International Biosphere Reserve Congress in Seville resulted in a set of new regulations that spurred a significant paradigm shift in the UNESCO Man and Bio-sphere (MAB) Programme, reconceptualizing the research programme as a modern instrument for the dual mandate of nature conservation and sustainable development. But almost 20 years later, a large proportion of biosphere reserves designated before 1996 still did not comply with the new regulations. In 2013, the International Coordination Council of the MAB Programme announced the ‘Exit Strategy’ to assess, monitor and improve the quality of the World Network of Biosphere Reserves. However, the strategy also meant that 266 biosphere reserves in 76 member states were faced with the possibility of exclusion from the world network. This study presents a global assessment of the challenges that result from the Exit Strategy and the Process of Excellence and Enhancement that follows. Specifically, it investigates the differences in quality management strategies and the periodic review processes of various biosphere reserves, the effects of those quality management strategies on the MAB Programme and on the 76 directly affected member states, and the interlinkages between the MAB Programme and other UNESCO designations for nature conservation: the natural World Heritage Sites and the Global Geoparks. Semi-structured expert interviews were conducted with 31 participants in 21 different countries, representing all UN regions. To showcase the diversity of the World Network of Bio-sphere Reserves, 20 country-specific case studies are presented, highlighting the challenges of implementing the biosphere reserve concept and, more specifically, the periodic review process. Information gleaned from the experts was transcribed and evaluated using a qualitative content analysis method. The results of this study demonstrate major differences worldwide in the implementation biosphere reserves, especially in the case of the national affiliation of the MAB Programme, the legal recognition of biosphere reserves in national legislation, the usage of the term ‘bio-sphere reserve’ and the governance structures of the biosphere reserves. Of those represented by the case studies, the four countries with the highest number of voluntary biosphere reserves withdrawals after 2013, Australia, Austria, Bulgaria and the United States of America, show that the Exit Strategy contributed to the streamlining and quality enhancement of the world network. The biosphere reserves in those countries were strictly nature conservation areas without human settlements and were designated as such in the 1970s and 1980s. Only post-Seville biosphere reserves remain in those countries. Some experts have pointed out that there appears to be competition for political attention and funding between the three UNESCO labels for nature conservation. While a combination of the designation of biosphere reserves and World Heritage Sites in one place is favoured by experts, Global Geoparks and Biosphere Reserves are seen as being in competition with each other. This study concludes that quality enhancement strategies were fundamental to improving the credibility and coherence of the MAB Programme. Most pre-Seville biosphere reserves were adapted or the member states were encouraged to withdraw them voluntarily. Challenges in implementing the Exit Strategy were not unique to individual countries but applied equally to all member states with pre-Seville sites. Over the course of the quality enhancement process, many UNESCO member states have become more involved with the MAB Programme, which has led to rejuvenation of the national biosphere reserves network in many countries. N2 - Im Jahr 1995 führte der zweite internationale Kongress für Biosphärenreservate in Sevilla zu einer Reihe neuer Richtlinien, die einen bedeutenden Paradigmenwechsel im UNESCO-Programm „Der Mensch und die Biosphäre“ (MAB) einleiteten und das bestehende For-schungsprogramm in ein modernes Instrument für das doppelte Mandat des Naturschutzes und der nachhaltigen Entwicklung entwickelte. Doch fast 20 Jahre später entsprach ein gro-ßer Teil der vor 1996 ausgewiesenen Biosphärenreservate immer noch nicht den neuen Vorschriften. Im Jahr 2013 verkündete der Internationale Koordinierungsrat des MAB-Programms die „Exit-Strategie“ zur Evaluierung, Monitoring und Qualitätsverbesserung des Weltnetzes der Biosphärenreservate. Die Exit-Strategie bedeutete jedoch auch, dass 266 Biosphärenreservate in 76 Mitgliedsstaaten mit der Möglichkeit des Ausschlusses aus dem Weltnetz konfrontiert wurden. Diese Studie präsentiert eine globale Bewertung der Herausforderungen, die sich aus der Exit-Strategie und dem darauffolgenden Prozess der Exzellenz und Aufwertung ergeben. Es werden insbesondere die Unterschiede in den Qualitätsmanagementstrategien und den pe-riodischen Überprüfungsprozessen der verschiedenen Biosphärenreservate, die Auswir-kungen dieser Qualitätsmanagementstrategien auf das MAB-Programm und auf die 76 di-rekt betroffenen Mitgliedsstaaten sowie die Verflechtungen zwischen dem MAB-Programm und anderen UNESCO-Naturschutzsiegeln untersucht: die Weltnaturerbestätten und die Globalen Geoparks. Es wurden halbstrukturierte Experteninterviews mit 31 Teilnehmern aus 21 verschiede-nen Ländern geführt, die alle UN-Regionen repräsentieren. Um die Vielfalt des Weltnetzes der Biosphärenreservate zu veranschaulichen, werden 20 länderspezifische Fallstudien vor-gestellt, in denen die Herausforderungen bei der Umsetzung des Biosphärenreservatskon-zepts und insbesondere des periodischen Überprüfungsprozesses beleuchtet werden. Die von den Experten gesammelten Informationen wurden transkribiert und mit Hilfe einer qualitativen Inhaltsanalyse ausgewertet. Die Ergebnisse dieser Studie zeigen, dass es weltweit große Unterschiede bei der Imple-mentierung von Biosphärenreservaten gibt, insbesondere was die nationale Zuständigkeit für das MAB-Programm, die rechtliche Verankerung von Biosphärenreservaten in der na-tionalen Gesetzgebung, die Verwendung des Begriffs „Biosphärenreservat“ und die Gover-nancestrukturen der Biosphärenreservate betrifft. Von den Fallbeispielländern dieser Ar-beit zeigen die vier Nationen mit den meisten freiwilligen Rücknahmen von Biosphä-renreservaten aus dem Weltnetzwerk nach 2013, nämlich Australien, Österreich, Bulgarien und die Vereinigten Staaten von Amerika, dass die Exit-Strategie zur Vereinheitlichung und Qualitätsverbesserung des Weltnetzes beigetragen hat. Die Biosphärenreservate in diesen Ländern waren reine Naturschutzgebiete ohne menschliche Besiedlung und wurden in den 1970er und 1980er Jahren als solche ausgewiesen. In diesen Ländern gibt es nur noch Bio-sphärenreservate, die den Qualitätsstandards nach der Konferenz von Sevilla im Jahr 1995 entsprechen. Einige Experten haben darauf hingewiesen, dass es zwischen den drei UNE-SCO-Naturschutzsiegeln einen Wettbewerb um politische Aufmerksamkeit und Finanzie-rung gibt. Während eine Kombination von Biosphärenreservaten und Weltnaturerbe-stätten an einem Ort von Experten favorisiert wird, werden Globale Geoparks und Biosphä-renreservate als miteinander konkurrierend angesehen. Diese Arbeit kommt zu dem Schluss, dass die eingeführten Strategien zur Qualitätsver-besserung von grundlegender Bedeutung waren, um die Glaubwürdigkeit und Kohärenz des MAB-Programms zu verbessern. Die meisten Biosphärenreservate aus der ersten Gene-ration vor der Sevilla-Konferenz wurden angepasst oder die Mitgliedsstaaten wurden ermu-tigt, diese freiwillig aus dem Weltnetzwerk zurückzuziehen. Die Herausforderungen bei der Umsetzung der Exit-Strategie waren nicht auf einzelne Länder beschränkt, sondern betra-fen alle Mitgliedstaaten mit Biosphärenreservaten aus der Zeit vor Sevilla gleichermaßen. Im Zuge der Qualitätssteigerung haben sich viele UNESCO-Mitgliedstaaten stärker im MAB-Programm engagiert, was in vielen Ländern zu einer Belebung der nationalen Bio-sphärenreservatsnetzwerke geführt hat. N2 - The Seville Strategy spurred a signifi cant paradigm shift in UNESCO’s MAB Programme, re-conceptualising the research programme as a modern tool for the dual mandate of nature conservation and sustainable development. However, many biosphere reserves failed to comply with the new regulations and in 2013 the ‘Exit Strategy’ was announced to improve the quality of the global network. This study presents a global assessment of the implementation of the quality enhancement strategies, highlighting signifi cant differences worldwide through 20 country-specifi c case studies. It concludes that the strategies have been fundamental in improving the credibility and coherence of the MAB Programme. Challenges in the implementation were not unique to individual countries but were common to all Member States with pre-Seville sites, and in many states the process has led to a rejuvenation of national biosphere reserve networks. KW - Naturschutz KW - Nature Conservation KW - Quality Management KW - Biosphere Reserves KW - UNESCO designations KW - Sustainable Development KW - Qualitätsmanagement KW - Biosphärenreservat KW - Nachhaltigkeit Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-286538 SN - 978-3-95826-196-9 SN - 978-3-95826-197-6 N1 - Parallel erschienen als Druckausgabe bei Würzburg University Press, ISBN 978-3-95826-196-9, 31,80 Euro. PB - Würzburg University Press CY - Würzburg ER - TY - JOUR A1 - Richard, Kyalo A1 - Abdel-Rahman, Elfatih M. A1 - Subramanian, Sevgan A1 - Nyasani, Johnson O. A1 - Thiel, Michael A1 - Jozani, Hosein A1 - Borgemeister, Christian A1 - Landmann, Tobias T1 - Maize cropping systems mapping using RapidEye observations in agro-ecological landscapes in Kenya JF - Sensors N2 - Cropping systems information on explicit scales is an important but rarely available variable in many crops modeling routines and of utmost importance for understanding pests and disease propagation mechanisms in agro-ecological landscapes. In this study, high spatial and temporal resolution RapidEye bio-temporal data were utilized within a novel 2-step hierarchical random forest (RF) classification approach to map areas of mono- and mixed maize cropping systems. A small-scale maize farming site in Machakos County, Kenya was used as a study site. Within the study site, field data was collected during the satellite acquisition period on general land use/land cover (LULC) and the two cropping systems. Firstly, non-cropland areas were masked out from other land use/land cover using the LULC mapping result. Subsequently an optimized RF model was applied to the cropland layer to map the two cropping systems (2nd classification step). An overall accuracy of 93% was attained for the LULC classification, while the class accuracies (PA: producer’s accuracy and UA: user’s accuracy) for the two cropping systems were consistently above 85%. We concluded that explicit mapping of different cropping systems is feasible in complex and highly fragmented agro-ecological landscapes if high resolution and multi-temporal satellite data such as 5 m RapidEye data is employed. Further research is needed on the feasibility of using freely available 10–20 m Sentinel-2 data for wide-area assessment of cropping systems as an important variable in numerous crop productivity models. KW - remote sensing KW - RapidEye KW - bi-temporal KW - cropping systems KW - random forest KW - Kenya Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173285 VL - 17 IS - 11 ER - TY - BOOK A1 - Wiedemann, Cathrin T1 - Picken, Packen, Radeln? Betriebsformen, Standorte, Arbeitsprozesse und deren Auswirkungen auf Beschäftigte im Lebensmittelonlinehandel in Deutschland T1 - Picking, packing, cycling? Operational forms, locations, work processes and their effects on employees in E-Food in Germany N2 - Der Lebensmittelonlinehandel in Deutschland gewann, verstärkt durch die Covid-19-Pandemie, an Umsatzanteilen im Lebensmitteleinzelhandel. Hierdurch wurden neue Anforderungen an Arbeit und Beschäftigung in Deutschland geschaffen. Insbesondere in urbanen Räumen hat die Lebensmittelzustellung durch neu entstandene Betriebsformen zugenommen. So entstehen durch das Versprechen der Betriebe, Lebensmittel in kurzen Zeiträumen zu liefern, verschiedene Logistikstandorte und u.a. urbane Fahrradlieferdienste. Während Medien und Gewerkschaften bereits vor der Entstehung prekärer Arbeitsbedingungen warnen, sind die genauen Auswirkungen des Lebensmittelonlinehandels auf die Entwicklung neuer Arbeitsstandorte und die dort stattfindende Beschäftigung nur unzureichend bekannt. Diese Arbeit untersucht den Lebensmittelonlinehandel anhand seiner Betriebsformen, Standorte und Arbeitsprozesse sowie deren Auswirkungen auf Beschäftigte in Deutschland. Den konzeptionellen Hintergrund bilden Arbeiten der geographischen Handelsforschung sowie Debatten zu Arbeitsplatzqualität und Beschäftigung. Für die Analyse sind Primärdaten und Sekundärdaten erhoben worden. Es zeigt sich, dass teilweise komplexe Betriebsformen entstehen, bei denen sich die Arbeit und Arbeitsorte verändern. Zudem entstehen neue Herausforderungen für die Beschäftigten (u.a. physische und psychische Belastung), welche in dieser Arbeit identifiziert werden. N2 - In Germany, E-Food has gained sales shares in food retailing, boosted by the Covid-19 pandemic. This has created new demands on labour and employment, especially in urban areas. E-Food delivery has increased due to newly emerged types of operations. For example, the promise of firms to deliver groceries in short periods of time has given rise to various logistics locations and, among other things, urban cycling delivery services. Whilst the media and unions are already warning of the emergence of precarious working conditions, the precise impact of E-Food on the development of new work locations and corresponding employment is poorly understood. This thesis examines E-Food in terms of its operational forms, locations, and work processes, as well as its impact on employees in Germany. The conceptual background is provided by work in geographic retail research and debates on employment and job quality. Primary and secondary data were collected for the analysis. It is shown that in some cases, complex forms of operation are emerging in which work and work locations are changing. In addition, new challenges arise for employees (including physical and psychological stress), which are identified in this work. T3 - Geographische Handelsforschung - 34 KW - Arbeitsprozess KW - Standort KW - Beschäftigung KW - Einzelhandel KW - E-Food KW - prekäre Arbeit KW - Logistikzentren KW - urbane Lebensmittellieferant:innen KW - Lebensmittelhandel KW - räumliche Verteilung KW - Arbeitsbedingungen KW - Onlinehandel KW - Deutschland Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-298886 SN - 978-3-95826-208-9 SN - 978-3-95826-209-6 SN - 2196-5811 SN - 2626-8906 N1 - Dissertation, Geographisches Institut, Universität zu Köln, 2022 N1 - Parallel erschienen als Druckausgabe in Würzburg University Press, ISBN 978-3-95826-208-9, 29,80 EUR PB - Würzburg University Press CY - Würzburg ET - 1. Auflage ER - TY - JOUR A1 - Aich, Valentin A1 - Akhundzadah, Noor Ahmad A1 - Knuerr, Alec A1 - Khoshbeen, Ahmad Jamshed A1 - Hattermann, Fred A1 - Paeth, Heiko A1 - Scanlon, Andrew A1 - Paton, Eva Nora T1 - Climate change in Afghanistan deduced from reanalysis and coordinated regional climate downscaling experiment (CORDEX)—South Asia Simulations JF - Climate N2 - Past and the projected future climate change in Afghanistan has been analyzed systematically and differentiated with respect to its different climate regions to gain some first quantitative insights into Afghanistan’s vulnerability to ongoing and future climate changes. For this purpose, temperature, precipitation and five additional climate indices for extremes and agriculture assessments (heavy precipitation; spring precipitation; growing season length (GSL), the Heat Wave Magnitude Index (HWMI); and the Standardized Precipitation Evapotranspiration Index (SPEI)) from the reanalysis data were examined for their consistency to identify changes in the past (data since 1950). For future changes (up to the year 2100), the same parameters were extracted from an ensemble of 12 downscaled regional climate models (RCM) of the Coordinated Regional Climate Downscaling Experiment (CORDEX)-South Asia simulations for low and high emission scenarios (Representative Concentration Pathways 4.5 and 8.5). In the past, the climatic changes were mainly characterized by a mean temperature increase above global level of 1.8 °C from 1950 to 2010; uncertainty with regard to reanalyzed rainfall data limited a thorough analysis of past changes. Climate models projected the temperature trend to accelerate in the future, depending strongly on the global carbon emissions (2006–2050 Representative Concentration Pathways 4.5/8.5: 1.7/2.3 °C; 2006–2099: 2.7/6.4 °C, respectively). Despite the high uncertainty with regard to precipitation projections, it became apparent that the increasing evapotranspiration is likely to exacerbate Afghanistan’s already existing water stress, including a very strong increase of frequency and magnitude of heat waves. Overall, the results show that in addition to the already extensive deficiency in adaptation to current climate conditions, the situation will be aggravated in the future, particularly in regard to water management and agriculture. Thus, the results of this study underline the importance of adequate adaptation to climate change in Afghanistan. This is even truer taking into account that GSL is projected to increase substantially by around 20 days on average until 2050, which might open the opportunity for extended agricultural husbandry or even additional harvests when water resources are properly managed. KW - climate change KW - Afghanistan KW - Coordinated Regional Climate Downscaling Experiment (CORDEX)-South Asia KW - trend analysis KW - Heat Wave Magnitude Index (HWMI) KW - Standardized Precipitation Evapotranspiration Index (SPEI) KW - growing season length (GSL) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-198024 SN - 2225-1154 VL - 5 IS - 2 ER - TY - THES A1 - Nwaila, Tsundukani Glen T1 - Geochemistry of Palaeoarchaean to Palaeoproterozoic Kaapvaal Craton marine shales: Implications for sediment provenance and siderophile elements endowment T1 - Geochemie paläoarchaischer bis paläoproterozoischer mariner Tonschiefer des Kaapvaal Kratons: Hinweise auf Sediment Provenienz und Anreicherung an siderophilen Elementen N2 - The Kaapvaal Craton hosts a number of large gold deposits (e.g. Witwatersrand Supergroup) which mining companies have exploited at certain stratigraphic positions. It also hosts the largest platinum group element (PGE) deposits (e.g. Bushveld Igneous Complex) which mining companies have exploited in different mineralised layered magmatic zones. In spite of the extensive exploration history in the Kaapvaal Craton, the origin of the Witwatersrand gold deposits and Bushveld Igneous Complex PGE deposits has remained one of the most debated topics in economic geology. The goal of this study was to identify the geochemical characteristics of marine shales in the Barberton, Witwatersrand, and Transvaal supergroups in South Africa in order to make inferences on their sediment provenance and siderophile element endowments. Understanding why some of the Archaean and Proterozoic hinterlands are heavily mineralised, compared to others with similar geological characteristics, will aid in the development of more efficient exploration models. Fresh, unmineralised marine shales from the Barberton (Fig Tree and Moodies groups), Witwatersrand (West Rand and Central Rand groups), and Transvaal (Black Reef Formation and Pretoria Group) supergroups were sampled from drill core and underground mining exposures. Analytical methods, such as X-ray powder diffraction (XRD), optical microscopy, X-ray fluorescence (XRF), inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), and electron microprobe analysis (EMPA) were applied to comprehensively characterise the shales. All of the Au and PGE assays examined the newly collected shale samples. The Barberton Supergroup shales consist mainly of quartz, illite, chlorite, and albite, with diverse heavy minerals, including sulfides and oxides, representing the minor constituents. The regionally persistent Witwatersrand Supergroup shales consist mainly of quartz, muscovite, and chlorite, and also contain minor constituents of sulfides and oxides. The Transvaal Supergroup shales comprise quartz, chlorite, and carbonaceous material. Major, trace (including rare-earth element) concentrations were determined for shales from the above supergroups to constrain their source and post-depositional evolution. Chemical variations were observed in all the studied marine shales. Results obtained from this study revealed that post-depositional modification of shale chemistry was significant only near contacts with over- and underlying coarser-grained siliciclastic rocks and along cross-cutting faults, veins, and dykes. Away from such zones, the shale composition remained largely unaltered and can be used to draw inferences concerning sediment provenance and palaeoweathering in the source region and/or on intrabasinal erosion surfaces. Evaluation of weathering profiles through sections of the studied supergroups revealed that the shales therein are characterised by high chemical index of alteration (CIA), chemical index of weathering (CIW), and index of compositional variability (ICV), suggesting that the source area was lithologically complex and subject to intense chemical weathering. A progressive change in the chemical composition was identified, from a dominant ultramafic–mafic source for the Fig Tree Group to a progressively felsic–plutonic provenance for the Moodies Group. The West Rand Group of the Witwatersrand Supergroup shows a dominance of tonalite–trondhjemite–granodiorite and calcalkaline granite sources. Compositional profiles through the only major marine shale unit within the Central Rand Group indicate the progressive unroofing of a granitic source in an otherwise greenstone-dominated hinterland during the course of sedimentation. No plausible likely tectonic setting was obtained through geochemical modelling. However, the combination of the systematic shale chemistry, geochronology, and sedimentology in the Witwatersrand Supergroup supports the hypothesised passive margin setting for the >2.98 to 2.91 Ga West Rand Group, and an active continental margin source for the overlying >2.90 to 2.78 Ga Central Rand Group, along with a foreland basin setting for the latter. Ultra-low detection limit analyses of gold and PGE concentrations revealed a variable degree of gold accumulation within pristine unmineralised shales. All the studied shales contain elevated gold and PGE contents relative to the upper continental crust, with marine shales from the Central Rand Group showing the highest Au (±9.85 ppb) enrichment. Based on this variation in the provenance of contemporaneous sediments in different parts of the Kaapvaal Craton, one can infer that the siderophile elements were sourced from a fertile hinterland, but concentrated into the marine shales by a combination of different processes. It is proposed that accumulation of siderophile elements in the studied marine shales was mainly controlled by mechanical coagulation and aggregation. These processes involved suspended sediments, fine gold particles, and other trace elements being trapped in marine environments. Mechanical coagulation and aggregation resulted in gold enrichments by 2–3 orders of magnitude, whereas some of the gold in these marine shales can be reconciled by seawater adsorption into sedimentary pyrite. For the source of gold and PGEs in the studied marine shales in the Kaapvaal Craton, a genetic model is proposed that involves the following: (1) A highly siderophile elements enriched upper mantle domain, herein referred to as “geochemically anomalous mantle domain”, from which the Kaapvaal crust was sourced. This mantle domain enriched in highly siderophile elements was formed either by inhomogeneous mixing with cosmic material that was added during intense meteorite bombardment of the Hadaean to Palaeoarchaean Earth or by plume-like ascent of relics from the core–mantle boundary. In both cases, elevated siderophile elements concentrations would be expected. The geochemically anomalous mantle domain is likely the ultimate source of the Witwatersrand modified palaeoplacer gold deposits and was tapped again ca. 2.054 Ga during the emplacement of the Bushveld Igneous Complex. Therefore, I propose that there is a genetic link (i.e. common geochemically anomalous mantle source) between the Witwatersrand gold deposits and the younger Bushveld Igneous Complex PGE deposits. (2) Scavenging of crustal gold by various surface processes such as trapping of gold from Archaean/Palaeoproterozoic river water on the surface of local photosynthesizing cyanobacterial or microbial mats, and reworking of these mats into erosion channels during flooding events. The above two models complement each other, with model (1) providing a common geological source for the Witwatersrand gold and Bushveld Igneous Complex PGE deposits, and model (2) explaining the processes responsible for Witwatersrand-type gold pre-concentration processes. In sequences such as the Transvaal Supergroup, a less fertile hinterland and/or less reworking of older sediments led to a correspondingly lower gold endowment. These findings indicate temporal distribution of siderophile elements in the upper crust (e.g. marine shales). The overall implications of these findings are that background concentrations of gold and PGEs can be used to target potential exploration areas in other cratons of similar age. This increases the likelihood of finding other Witwatersrand-type gold or Bushveld Igneous Complex-type PGE deposits in other cratons. N2 - Der Kaapvaal Kraton beherbergt eine Vielzahl großer Goldlagerstätten (vor allem in der Witwatersrand Hauptgruppe), die von Bergbaugesellschaften in ihrer jeweiligen stratigraphischen Position abgebaut werden. Im diesem Kraton liegen auch die größten Lagerstätten für Platingruppenelemente (vornehmlich im Bushveld Komplex), die aus diversen magmatischen Intrusionskörpern gewonnen werden. Trotz der intensiven und langen Explorationsgeschichte im Bereich des Kaapvaal Kratons ist die Herkunft des Goldes in den Witwatersrand Lagerstätten und die der Platingruppenelemente in den Lagerstätten des Bushveld-Komplex noch ungeklärt und Gegenstand aktueller Diskussionen. Ziel der Arbeit war die geochemische Charakterisierung von Tonschiefern in den Barberton-, Witwatersrand und Transvaal-Hauptgruppen, um Aussagen über deren Provenienz zu treffen und die Gehalte an siderophilen Elementen darin zu ermitteln. Ein verbessertes Verständnis, warum manche archaischen und proterozoischen Einheiten stark mineralisiert sind und andere nicht, sollte bei der Planung zukünftiger Explorationsprojekte dienlich sein. Um dieses Ziel zu erreichen, wurden unalterierte und nicht mineralisierte Proben mariner Tonschiefer aus der Barberton Hauptgruppe (Fig Tree und Moodies Gruppen), der Witwatersrand Hauptgruppe (West Rand und Central Rand Gruppen) und der Transvaal Hauptgruppe (Black Reef Formation und Pretoria Gruppe) aus Untertage Bergbau-Bereichen sowie aus Bohrkernen genommen. Zur Charakterisierung der Tonschiefer kamen verschiedene Methoden zum Einsatz, darunter die Pulverdiffraktometrie (XRD), Durchlichtmikroskopie, Röntgenfluoreszenz (XRF), Optische Emissionsspektroskopie (ICP-OES), Laserablationsmassenspektrometrie (ICP-MS) und Elektronenstrahlmikrosonde (EMPA), sowie Bestimmung der Gold und Platingruppen-Elementkonzentrationen mittels Graphitrohr-AAS nach Voranreicherung mit der Nickelsulfid-Dokimasie. Die untersuchten Tonschiefer verhielten sich seit ihrer Ablagerung als größtenteils geschlossene Systeme. Nur entlang der Kontakte mit unter- und überlagernden grobkörnigeren Metasedimentgesteinen sowie entlang durchkreuzender Störungen, Quarzadern und Gängen konnte lokal nennenswerte Alteration festgestellt werden. Solche Zonen wurden explizit von der Provenienz-Analyse ausgenommen. Systematische Unterschiede in der primären chemischen Zusammensetzung einzelner Tonschiefer-Abfolgen belegen unterschiedliche Sedimentquellen. So wurde in der Barberton Hauptgruppe der Sedimenteintrag der Fig Tree-Gruppe von einer ultramafisch-mafischen Quelle dominiert, während in der Moodies-Gruppe felsische Quellen eine zunehmende Rolle spielten. In der Witwatersrand Hauptgruppe wurde eine Dominanz von Tonalit-Trondhjemit-Granodiorit sowie kalkalkaline Granite im Liefergebiet der West Rand Gruppe festgestellt, während in der Central Rand Gruppe anfänglich mafisch-ultramafische Gesteine im Sedimentliefergebiet vorherrschten, im Lauf der Zeit aber granitische Gesteine mehr und mehr durch Erosion im Hinterland freigelegt worden waren. Die Geochemie der Witwatersrand Tonschiefer unterstützt die Hypothese, dass die Sedimente der West Rand Gruppe an einem passiven Kontinentalrand abgelagert wurden, jene der Central Rand Gruppe in einem Vorlandbecken. Alle untersuchten archaischen Tonschiefer zeigen, verglichen mit dem Durchschnitt der oberen Erdkruste, deutlich erhöhte Gehalte an Gold und Platingruppenelementen, wobei die marinen Tonschiefer aus der Central Rand Gruppe mit durchschnittlich 9,85 ppm Au die höchsten Konzentrationen aufweisen. Die Gehalte an siderophilen Elementen in der palaeoproterozoischen Transvaal Hauptgruppe nähern sich hingegen typischen kontinentalen Krustenwerten an. Der verstärkte Eintrag von Au und PGE in die archaischen marinen tonigen Sedimente wird durch mechanische Koagulation und Aggregation erklärte, wobei feinstkörnige Goldpartikel im suspendierten Sediment weit ins Meer transportiert worden sind. Adsorption von Au aus Meerwasser an syn-sedimentärem Pyrit spielte auch eine Rolle, aber keine ausschlaggebende. Für die Quelle des Goldes und der Platingruppenelemente in den untersuchten Tonschiefern wurde folgendes genetisches Modell entwickelt. (1) Es wird angenommen, dass sich die Kaapvaal-Kruste aus einem Mantelreservoir differenzierte, welches an siderophilen Elementen angereichert war. Diese Anreicherung könnte entweder das Produkt eines nicht vollständig homogenisierten Eintrags kosmischen Materials sein, welches im Hadaikum oder im Paläoarchaikum durch intensives Meteoritenbombardement eingebracht wurde, oder durch den Aufstieg eines Manteldiapirs aus dem Bereich der Kern-Mantel-Grenze. (2) Tiefgründige Verwitterung unter anoxischen Bedingungen ermögliche die Freisetzung großer Mengen von Au, welches in gelöster Form über Oberflächenwässer in den archaischen Ozean transportiert wurde. Hinweise auf solch intensive Verwitterung liefern die geochemischen Daten der hier untersuchten Tonschiefern, insbesondere hohe chemische Alterationsindizes. Fixierung dieses Goldes durch verschiedene Oberflächenprozesse, wie Filterung aus archaischen/paläoproterozoischen Flüssen durch Photosynthese-betreibende Bakterienrasen führte vor allem im Mesoarchaikum in Zeiten der Sedimentation der Central Rand Gruppe zu lokal extremen Goldanreicherungen, die in der Folge durch Erosion und mechanischen Transport großteils weiter umgelagert wurden. Punkt 1 könnte eventuell die räumliche Nähe der weltweit größten bekannten Goldanomalie im Witwatersrand Becken und der größten PGE-Anomalie im Bushveld Komplex erklären. In wie weit die erhöhten Hintergrundkonzentrationen von Gold und Platingruppenelementen im Kaapvaal Kraton einzigartig sind, gilt es in zukünftigen Studien dieser Art auch an marinen Tonschiefern aus dem Archaikum in anderen Kratonen zu testen. KW - Gold KW - Gold KW - Platinmetalle KW - Tonschiefer KW - Kaapvaal Kraton KW - PGE KW - Shale KW - Kaapvaal Craton KW - Witwatersrand Supergroup KW - Barberton Supergroup KW - Transvaal Supergroup KW - Archean KW - Archaikum KW - Platingruppenmetalle Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-155326 ER - TY - THES A1 - Ziegler, Katrin T1 - Implementierung von verbesserten Landoberflächenparametern und -prozessen in das hochaufgelöste Klimamodell REMO T1 - Implementation of improved land surface parameters and processes for the high-resolution climate model REMO N2 - Das Ziel dieser Arbeit war neue Eingangsdaten für die Landoberflächenbeschreibung des regionalen Klimamodells REMO zu finden und ins Modell zu integrieren, um die Vorhersagequalität des Modells zu verbessern. Die neuen Daten wurden so in das Modell eingebaut, dass die bisherigen Daten weiterhin als Option verfügbar sind. Dadurch kann überprüft werden, ob und in welchem Umfang sich die von jedem Klimamodell benötigten Rahmendaten auf Modellergebnisse auswirken. Im Zuge der Arbeit wurden viele unterschiedliche Daten und Methoden zur Generierung neuer Parameter miteinander verglichen, denn neben dem Ersetzen der konstanten Eingangswerte für verschiedene Oberflächenparameter und den damit verbundenen Änderungen wurden als zusätzliche Verbesserung auch Veränderungen an der Parametrisierung des Bodens speziell in Hinblick auf die Bodentemperaturen in REMO vorgenommen. Im Rahmen dieser Arbeit wurden die durch die verschiedenen Änderungen ausgelösten Auswirkungen für das CORDEX-Gebiet EUR-44 mit einer Auflösung von ca. 50km und für das in dem darin eingebetteten neu definierten Deutschlandgebiet GER-11 mit einer Auflösung von ca. 12km getestet sowie alle Änderungen anhand von verschiedenen Beobachtungsdatensätzen validiert. Die vorgenommenen Arbeiten gliederten sich in drei Hauptteile. Der erste Teil bestand in dem vom eigentlichen Klimamodell unabhängigen Vergleich der verschiedenen Eingangsdaten auf unterschiedlichen Auflösungen und deren Performanz in allen Teilen der Erde, wobei ein besonderer Fokus auf der Qualität in den späteren Modellgebieten lag. Unter Berücksichtigung der Faktoren, wie einer globalen Verfügbarkeit der Daten, einer verbesserten räumlichen Auflösung und einer kostenlosen Nutzung der Daten sowie verschiedener Validationsergebnissen von anderen Studien, wurden in dieser Arbeit vier neue Topographiedatensätze (SRTM, ALOS, TANDEM und ASTER) und drei neue Bodendatensätze (FAOn, Soilgrid und HWSD) für die Verwendung im Präprozess von REMO aufbereitet und miteinander sowie mit den bisher in REMO verwendeten Daten verglichen. Auf Grundlage dieser Vergleichsstudien schieden bei den Topographiedaten die verwendeten Datensatz-Versionen von SRTM, ALOS und TANDEM für die in dieser Arbeit durchgeführten REMO-Läufe aus. Bei den neuen Bodendatensätzen wurde ausgenutzt, dass diese verschiedenen Bodeneigenschaften für unterschiedliche Tiefen als Karten zur Verfügung stellen. In REMO wurden bisher alle benötigten Bodenparameter abhängig von fünf verschiedenen Bodentexturklassen und einer zusätzlichen Torfklasse ausgewiesen und als konstant über die gesamte Modellbodensäule (bis ca. 10m) angenommen. Im zweiten Teil wurden auf Basis der im ersten Teil ausgewählten neuen Datensätze und den neu verfügbaren Bodenvariablen verschiedene Sensitivitätsstudien über das Beispieljahr 2000 durchgeführt. Dabei wurden verschiedene neue Parametrisierungen für die bisher aus der Textur abgeleiteten Bodenvariablen und die Parametrisierung von weiteren hydrologischen und thermalen Bodeneigenschaften verglichen. Ferner wurde aufgrund der neuen nicht über die Tiefe konstanten Bodeneigenschaften eine neue numerische Methode zur Berechnung der Bodentemperaturen der fünf Schichten in REMO getestet, welche wiederum andere Anpassungen erforderte. Der Test und die Auswahl der verschiedenen Datensatz- und Parametrisierungsversionen auf die Modellperformanz wurde in drei Experimentpläne unterteilt. Im ersten Plan wurden die Auswirkungen der ausgewählten Topographie- und Bodendatensätze überprüft. Der zweite Plan behandelte die Unterschiede der verschiedenen Parametrisierungsarten der Bodenvariablen hinsichtlich der verwendeten Variablen zur Berechnung der Bodeneigenschaften, der über die Tiefe variablen oder konstanten Eigenschaften und der verwendeten Berechnungsmethode der Bodentemperaturänderungen. Durch die Erkenntnisse aus diesen beiden Experimentplänen, die für beide Untersuchungsgebiete durchgeführt wurden, ergaben sich im dritten Plan weitere Parametrisierungsänderungen. Alle Änderungen dieses dritten Experimentplans wurden sukzessiv getestet, sodass der paarweise Vergleich von zwei aufeinanderfolgenden Modellläufen die Auswirkungen der Neuerung im jeweils zweiten Lauf widerspiegelt. Der letzte Teil der Arbeit bestand aus der Analyse von fünf längeren Modellläufen (2000-2018), die zur Überprüfung der Ergebnisse aus den Sensitivitätsstudien sowie zur Einschätzung der Performanz in weiteren teilweise extremen atmosphärischen Bedingungen durchgeführt wurden. Hierfür wurden die bisherige Modellversion von REMO (id01) für die beiden Untersuchungsgebiete EUR-44 und GER-11 als Referenzläufe, zwei aufgrund der Vergleichsergebnisse von Experimentplan 3 selektierte Modellversionen (id06 und id15a für GER-11) sowie die finale Version (id18a für GER-11), die alle vorgenommenen Änderungen dieser Arbeit enthält, ausgewählt. Es stellte sich heraus, dass sowohl die neuen Topographiedaten als auch die neuen Bodendaten große Differenzen zu den bisherigen Daten in REMO haben. Zudem änderten sich die von diesen konstanten Eingangsdaten abgeleiteten Hilfsvariablen je nach verwendeter Parametrisierung sehr deutlich. Dies war besonders gut anhand der Bodenparameter zu erkennen. Sowohl die räumliche Verteilung als auch der Wertebereich der verschiedenen Modellversionen unterschieden sich stark. Eine Einschätzung der Qualität der resultierenden Parameter wurde jedoch dadurch erschwert, dass auch die verschiedenen zur Validierung herangezogenen Bodendatensätze für diese Parameter deutlich voneinander abweichen. Die finale Modellversion id18a ähnelte trotz der umfassenden Änderungen in den meisten Variablen den Ergebnissen der bisherigen REMO-Version. Je nach zeitlicher und räumlicher Aggregation sowie unterschiedlichen Regionen und Jahreszeiten wurden leichte Verbesserungen, aber auch leichte Verschlechterungen im Vergleich zu den klimatologischen Validationsdaten festgestellt. Größere Veränderungen im Vergleich zur bisherigen Modellversion konnten in den tieferen Bodenschichten aufgezeigt werden, welche allerdings aufgrund von fehlenden Validationsdaten nicht beurteilt werden konnten. Für alle 2m-Temperaturen konnte eine tendenzielle leichte Erwärmung im Vergleich zum bisherigen Modelllauf beobachtet werden, was sich einerseits negativ auf die ohnehin durchschnittlich zu hohe Minimumtemperatur, aber andererseits positiv auf die bisher zu niedrige Maximumtemperatur des Modells in den betrachteten Gebieten auswirkte. Im Niederschlagssignal und in den 10m-Windvariablen konnten keine signifikanten Änderungen nachgewiesen werden, obwohl die neue Topographie an manchen Stellen im Modellgebiet deutlich von der bisherigen abweicht. Des Weiteren variierte das Ranking der verschiedenen Modellversionen jeweils nach dem angewendeten Qualitätsindex. Um diese Ergebnisse besser einordnen zu können, muss berücksichtigt werden, dass die neuen Daten für Modellgebiete mit 50 bzw. 12km räumlicher Auflösung und der damit verbundenen hydrostatischen Modellversion getestet wurden. Zudem sind vor allem in Fall der Topographie die bisher enthaltenen GTOPO-Daten (1km Auflösung) für die Aggregation auf diese gröbere Modellauflösung geeignet. Die bisherigen Bodendaten stoßen jedoch mit 50km Auflösung bereits an ihre Grenzen. Zusätzlich ist zu beachten, dass nicht nur die Mittelwerte dieser Daten, sondern auch deren Subgrid-Variabilität als Variablen im Modell für verschiedene Parametrisierungen verwendet werden. Daher ist es essentiell, dass die Eingangsdaten eine deutlich höhere Auflösung bereitstellen als die zur Modellierung definierte Auflösung. Für lokale Klimasimulationen mit Auflösungen im niedrigen Kilometerbereich spielen auch die Vertikalbewegungen (nicht-hydrostatische Modellversion) eine wichtige Rolle, die stark von der Topographie sowie deren horizontaler und vertikaler Änderungsrate beeinflusst werden, was die in dieser Arbeit eingebauten wesentlich höher aufgelösten Daten für die zukünftige Weiterentwicklung von REMO wertvoll machen kann. N2 - The main aim of this work was to find new input data sets for the land surface description of the regional climate model REMO and to integrate them into the model in order to improve the predictive quality of the model. The new data sets have been incorporated into the model in such a way that the previous data are still available as an option for the model run. This allows to check whether and to what extent the boundary data required by each climate model have an impact on the model results. In this study comparisons of many different data sets and methods for generating new parameters are included. In addition to replacing the constant input values for different surface parameters and the associated changes, changes were also made for the parameterization of the soil, especially with regard to the soil temperatures in REMO. The effects of different changes which were made in this study were analysed for the CORDEX region EUR-44 with a resolution of 50km and for a newly defined German area GER-11 with a resolution of 12km. All changes were validated with different observational data sets. The work process was divided into three main parts. The first part was independent of the actual climate model and included the comparison of different input data sets at different resolutions and their performance in all parts of the world. Taking into account factors such as global availability of the data, improved spatial resolution and free use of the data, as well as various validation results from other studies, four new topography data sets (SRTM, ALOS, TANDEM and ASTER) and three new soil data sets (FAOn, Soilgrid and HWSD) were processed for the usage by REMO and compared with each other and with the data sets previously used in REMO. Based on these comparative studies of the topographical data sets the SRTM, ALOS and TANDEM data set versions were excluded from the further usage in REMO in this study. For the new soil data sets the fact that they provide different soil properties for different depths as maps has been taken advantage of. In the previous REMO versions, all required soil parameters so far have been determined depending on five different soil texture classes with an additional peat class and assumed to be constant over the entire model soil column (up to approximately 10m). In the second part, several sensitivity studies were tested for the year 2000 based on the new data sets selected in the first part of the analysis and on the new available soil variables. Different new parameterizations for soil variables previously derived from the soil texture now based on the sand, clay and organic content of the soil as well as new parameterizations of further hydrological and thermal properties of soil were compared. In addition, due to the new non-constant soil properties, a new numerical method for calculating the soil temperatures of the five layers in the model was tested, which in turn necessitated further adjustments. The testing and selection of the different data sets and parameterization versions for the model according to performance was divided into three experimental plans. In the first plan, the effects of the selected topography and soil data sets were examined. The second plan dealt with the differences between the different types of parameterization of the soil variables in terms of the variables used to calculate the properties, the properties variable or constant over depth, and the method used to calculate the changes in soil temperature. The findings of these two experimental plans, which were carried out for both study areas, led to further parameterization changes in the third plan. All changes in this third experimental plan were tested successively, so the pairwise comparison of two consecutive model runs reflects the impact of the innovation in the second run. The final part of the analysis consists of five longer model runs (2000-2018), which were carried out to review the results of the sensitivity studies and to assess the performance under other, sometimes extreme, atmospheric conditions. For this purpose, the previous model version of REMO (id01) for the two study areas (EUR-44 and GER-11) served as reference runs. Two new model versions (GER-11 of id06 and id15a) were selected on the basis of the comparison results of the third experimental plan and the final version (GER-11 of id18a) which contains all changes made in this work was also chosen for a detailed analysis. Taken together the results show that both the new topography data and the new soil data differ crucially from the previous data sets in REMO. In addition, the auxiliary variables derived from these constant input data change significantly depending on the parameterization used, especially for the soil parameters. Both the spatial distribution and the range of values of the different model versions differ greatly. However, a quality assessment of the parameterization is difficult because different soil data sets used for the validation of the parameters also differ significantly. The final model version (id18a) is similar to the results of the previous REMO version in most variables, despite the extensive changes of the input data and parametrizations. Depending on temporal and spatial aggregation as well as different regions and seasons, slight improvements have been observed, but also slight deterioration compared to the climatological validation data. In the deeper soil layers larger changes could be identified compared to the previous model version, which could not be assessed due to a lack of validation data. Overall, there was also a slight warming of all 2m temperatures compared to the previous model run, which on the one hand has a negative effect on the already too high minimum temperature, but on the other hand has a positive effect on the previously too low maximum temperature of the model in the study areas. No significant changes could be detected in the precipitation signal and in the 10m wind variables, although the new topography differs significantly from the previous topography at some points in the test area. Furthermore, the ranking of the different model versions varied according to the quality index applied. To evaluate the results it has to be considered that the new data were tested for model regions with 50 and 12km spatial resolution and the associated hydrostatic model version. The so far already included data are suitable for aggregation to this coarser model resolution, especially in the case of topography (GTOPO with 1km resolution). However, the previous soil data already reach their limits with 50km resolution. In addition, it should be noted that not only the mean values of these data, but also their subgrid variability are used as variables in the model for different parameterizations. Therefore, it is essential that the input data provide a significantly higher resolution than the resolution defined for modeling. Vertical fluxes (non-hydrostatic model version) play an important role in local climate simulations with resolutions in the low kilometre range, which are strongly influenced by the topography and its horizontal and vertical change rate, which may make the much higher resolution data incorporated in this work valuable for the future development of REMO. KW - Klimamodell KW - Datenanalyse KW - Modellierung KW - Topographie KW - Klimamodellierung KW - REMO KW - Vergleich verschiedener Modellparameterisierungen KW - Bodenparameter KW - Topographiedaten KW - parametrizations Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-261285 ER - TY - JOUR A1 - Qamar, Muhammad Uzair A1 - Azmat, Muhammad A1 - Abbas, Azhar A1 - Usman, Muhammad A1 - Shahid, Muhammad Adnan A1 - Khan, Zahid Mahmood T1 - Water Pricing and Implementation Strategies for the Sustainability of an Irrigation System: A Case Study within the Command Area of the Rakh Branch Canal JF - Water N2 - The command area of the Rakh branch canal grows wheat, sugarcane, and rice crops in abundance. The canal water, which is trivial for irrigating these crops, is conveyed to the farms through the network of canals and distributaries. For the maintenance of this vast infrastructure; the end users are charged on a seasonal basis. The present water charges are severely criticized for not being adequate to properly manage the entire infrastructure. We use the residual value to determine the value of the irrigation water and then based on the quantity of irrigation water supplied to farm land coupled with the infrastructure maintenance cost, full cost recovery figures are executed for the study area, and policy recommendations are made for the implementation of the full cost recovery system. The approach is unique in the sense that the pricings are based on the actual quantity of water conveyed to the field for irrigating crops. The results of our analysis showed that the canal water is severely under charged in the culturable command area of selected distributaries, thus negating the plan of having a self-sustainable irrigation system. KW - irrigation pricing KW - value of water KW - distributary KW - culturable command area KW - sustainable irrigation system Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-224711 VL - 10 IS - 4, 509 ER - TY - JOUR A1 - Reinermann, Sophie A1 - Gessner, Ursula A1 - Asam, Sarah A1 - Kuenzer, Claudia A1 - Dech, Stefan T1 - The Effect of Droughts on Vegetation Condition in Germany: An Analysis Based on Two Decades of Satellite Earth Observation Time Series and Crop Yield Statistics JF - Remote Sensing N2 - Central Europe experienced several droughts in the recent past, such as in the year 2018, which was characterized by extremely low rainfall rates and high temperatures, resulting in substantial agricultural yield losses. Time series of satellite earth observation data enable the characterization of past drought events over large temporal and spatial scales. Within this study, Moderate Resolution Spectroradiometer (MODIS) Enhanced Vegetation Index (EVI) (MOD13Q1) 250 m time series were investigated for the vegetation periods of 2000 to 2018. The spatial and temporal development of vegetation in 2018 was compared to other dry and hot years in Europe, like the drought year 2003. Temporal and spatial inter- and intra-annual patterns of EVI anomalies were analyzed for all of Germany and for its cropland, forest, and grassland areas individually. While vegetation development in spring 2018 was above average, the summer months of 2018 showed negative anomalies in a similar magnitude as in 2003, which was particularly apparent within grassland and cropland areas in Germany. In contrast, the year 2003 showed negative anomalies during the entire growing season. The spatial pattern of vegetation status in 2018 showed high regional variation, with north-eastern Germany mainly affected in June, north-western parts in July, and western Germany in August. The temporal pattern of satellite-derived EVI deviances within the study period 2000-2018 were in good agreement with crop yield statistics for Germany. The study shows that the EVI deviation of the summer months of 2018 were among the most extreme in the study period compared to other years. The spatial pattern and temporal development of vegetation condition between the drought years differ. KW - drought KW - time series KW - heat wave KW - agriculture KW - climate extremes KW - climate change KW - crop statistics KW - MODIS KW - Germany Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-225165 VL - 11 IS - 15 ER - TY - JOUR A1 - Khare, Suyash A1 - Latifi, Hooman A1 - Khare, Siddhartha T1 - Vegetation growth analysis of UNESCO World Heritage Hyrcanian forests using multi-sensor optical remote sensing data JF - Remote Sensing N2 - Freely available satellite data at Google Earth Engine (GEE) cloud platform enables vegetation phenology analysis across different scales very efficiently. We evaluated seasonal and annual phenology of the old-growth Hyrcanian forests (HF) of northern Iran covering an area of ca. 1.9 million ha, and also focused on 15 UNESCO World Heritage Sites. We extracted bi-weekly MODIS-NDVI between 2017 and 2020 in GEE, which was used to identify the range of NDVI between two temporal stages. Then, changes in phenology and growth were analyzed by Sentinel 2-derived Temporal Normalized Phenology Index. We modelled between seasonal phenology and growth by additionally considering elevation, surface temperature, and monthly precipitation. Results indicated considerable difference in onset of forests along the longitudinal gradient of the HF. Faster growth was observed in low- and uplands of the western zone, whereas it was lower in both the mid-elevations and the western outskirts. Longitudinal range was a major driver of vegetation growth, to which environmental factors also differently but significantly contributed (p < 0.0001) along the west-east gradient. Our study developed at GEE provides a benchmark to examine the effects of environmental parameters on the vegetation growth of HF, which cover mountainous areas with partly no or limited accessibility. KW - Hyrcanian forest KW - NDVI KW - phenology KW - Sentinel-2 KW - TNPI KW - World Heritage Sites KW - Google Earth Engine Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-248398 SN - 2072-4292 VL - 13 IS - 19 ER - TY - JOUR A1 - Thonfeld, Frank A1 - Steinbach, Stefanie A1 - Muro, Javier A1 - Kirimi, Fridah T1 - Long-term land use/land cover change assessment of the Kilombero catchment in Tanzania using random forest classification and robust change vector analysis JF - Remote Sensing N2 - Information about land use/land cover (LULC) and their changes is useful for different stakeholders to assess future pathways of sustainable land use for food production as well as for nature conservation. In this study, we assess LULC changes in the Kilombero catchment in Tanzania, an important area of recent development in East Africa. LULC change is assessed in two ways: first, post-classification comparison (PCC) which allows us to directly assess changes from one LULC class to another, and second, spectral change detection. We perform LULC classification by applying random forests (RF) on sets of multitemporal metrics that account for seasonal within-class dynamics. For the spectral change detection, we make use of the robust change vector analysis (RCVA) and determine those changes that do not necessarily lead to another class. The combination of the two approaches enables us to distinguish areas that show (a) only PCC changes, (b) only spectral changes that do not affect the classification of a pixel, (c) both types of change, or (d) no changes at all. Our results reveal that only one-quarter of the catchment has not experienced any change. One-third shows both, spectral changes and LULC conversion. Changes detected with both methods predominantly occur in two major regions, one in the West of the catchment, one in the Kilombero floodplain. Both regions are important areas of food production and economic development in Tanzania. The Kilombero floodplain is a Ramsar protected area, half of which was converted to agricultural land in the past decades. Therefore, LULC monitoring is required to support sustainable land management. Relatively poor classification performances revealed several challenges during the classification process. The combined approach of PCC and RCVA allows us to detect spatial patterns of LULC change at distinct dimensions and intensities. With the assessment of additional classifier output, namely class-specific per-pixel classification probabilities and derived parameters, we account for classification uncertainty across space. We overlay the LULC change results and the spatial assessment of classification reliability to provide a thorough picture of the LULC changes taking place in the Kilombero catchment. KW - land-use/land-cover change KW - robust change vector analysis KW - Kilombero KW - wetland KW - food production KW - random forest KW - multitemporal metrics KW - Landsat KW - post-classification comparison Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203513 SN - 2072-4292 VL - 12 IS - 7 ER -