TY - JOUR A1 - Dostál, Jakub A1 - Fennel, Franziska A1 - Koch, Federico A1 - Herbst, Stefanie A1 - Würthner, Frank A1 - Brixner, Tobias T1 - Direct observation of exciton–exciton interactions JF - Nature Communications N2 - Natural light harvesting as well as optoelectronic and photovoltaic devices depend on efficient transport of energy following photoexcitation. Using common spectroscopic methods, however, it is challenging to discriminate one-exciton dynamics from multi-exciton interactions that arise when more than one excitation is present in the system. Here we introduce a coherent two-dimensional spectroscopic method that provides a signal only in case that the presence of one exciton influences the behavior of another one. Exemplarily, we monitor exciton diffusion by annihilation in a perylene bisimide-based J-aggregate. We determine quantitatively the exciton diffusion constant from exciton–exciton-interaction 2D spectra and reconstruct the annihilation-free dynamics for large pump powers. The latter enables for ultrafast spectroscopy at much higher intensities than conventionally possible and thus improves signal-to-noise ratios for multichromophore systems; the former recovers spatio–temporal dynamics for a broad range of phenomena in which exciton interactions are present. KW - energy transfer KW - self-assembly KW - optical spectroscopy Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-226271 VL - 9 ER - TY - THES A1 - Wenderoth, Sarah T1 - Synthesis and characterization of shear stress indicator supraparticles T1 - Synthese und Charakterisierung von Scherstress-Indikator-Suprapartikeln N2 - The detection of smallest mechanical loads plays an increasingly important role in many areas of advancing automation and manufacturing technology, but also in everyday life. In this doctoral thesis, various microparticle systems were developed that are able to indicate mechanical shear stress via simple mechanisms. Using a toolbox approach, these systems can be spray-dried from various nanoscale primary particles (silica and iron oxide) to micrometer-sized units, so-called supraparticles. By varying the different building blocks and in combination with different dyes, a new class of mechanochromic shear stress indicators was developed by constructing hierarchically structured core-shell supraparticles that can indicate mechanical stress via an easily detectable color change. Three different mechanisms can be distinguished. If a signal becomes visible only by a mechanical load, it is a turn-on indicator. In the opposite case, the turn-off indicator, the signal is switched off by a mechanical load. In the third mechanism, the color-change indicator, the color changes as a result of a mechanical load. In principle, these indicators can be used in two different ways. First, they can be incorporated into a coating as an additive. These coatings can be applied to a wide range of products, including food packaging, medical devices, and generally any sensitive surface where mechanical stress, such as scratches, is difficult to detect but can have serious consequences. Second, these shear stress indicators can also be used directly in powder form and for example then applied in 3D-printing or in ball mills. A total of six different shear stress indicators were developed, three of which were used as additives in coatings and three were applied in powder form. Depending on their composition, these indicators were readout by fluorescence, UV-Vis or Magnetic Particle Spectroscopy. The development of these novel shear stress indicator supraparticles were successfully combined molecular chemistry with the world of nano-objects to develop macroscopic systems that can enable smart and communicating materials to indicate mechanical stress in a variety of applications. N2 - Die Erfassung kleinster mechanischer Belastungen spielt in vielen Bereichen der fortschreitenden Automatisierungs- und Fertigungstechnik, aber auch im täglichen Leben eine immer wichtigere Rolle. Im Rahmen dieser Doktorarbeit wurden verschiedene mikropartikuläre Systeme entwickelt, die in der Lage sind, mechanische Scherbelastungen über einfache Mechanismen anzuzeigen. Diese Systeme können mit einem Baukastenprinzip über das Sprühtrocknungsverfahren aus verschiedenen nanoskaligen Primärpartikeln (Silica und Eisenoxid) zu mikrometergroßen Einheiten, sogenannten Suprapartikeln, aufgebaut werden. Durch den Aufbau von hierarchisch strukturierten Kern-Schale Suprapartikeln, die durch Variation der verschiedenen Bausteine und in Kombination mit unterschiedlichen Farbstoffen mechanische Belastungen durch einen leicht detektierbaren Farbumschlag anzeigen können, wurde eine neue Klasse von mechanochromen Scherstress-Indikatoren entwickelt. Dabei kann zwischen drei verschiedene Mechanismen unterschieden werden. Wird ein Signal erst durch eine mechanische Belastung sichtbar, handelt es sich um Turn-on Indikatoren. Im umgekehrten Fall, den Turn-off Indikatoren, wird das Signal durch eine mechanische Belastung abgeschaltet. Beim dritten Mechanismus, den Color-change Indikatoren, ändert sich die Farbe durch eine mechanische Belastung. Diese Indikatoren können prinzipiell auf zwei verschiedene Arten eingesetzt werden. Zum einen können sie als Additive in eine Beschichtung eingearbeitet werden. Diese Schichten sind auf vielen Produkten applizierbar, wie z. B. auf Lebensmittelverpackungen, auf medizinischen Gütern oder allgemein auf allen sensiblen Oberflächen, bei denen mechanische Belastungen, wie z. B. Kratzer, schwierig zu detektieren sind, aber schwerwiegende Folgen haben können. Zum anderen sind diese Scherstress-Indikatoren auch direkt in Pulverform einsetzbar. So können sie z. B. in der Robotik, im 3D-Druck oder in Kugelmühlen eingesetzt werden. Im Rahmen dieser Arbeit konnten insgesamt sechs verschiedene Scherstress-Indikatoren entwickelt werden, von denen drei als Additive in Beschichtungen und drei in Pulverform Verwendung finden. Diese suprapartikulären Indikatoren können, je nach Zusammensetzung, mittels Fluoreszenz-, UV-Vis- oder Magnetischer Partikel Spektroskopie ausgelesen werden und dadurch mechanische Belastung anzeigen. Durch die Entwicklung dieser neuartigen Scherstress-Indikator-Suprapartikel ist es gelungen, die Molekülchemie mit der Welt der Nanoobjekte zu verbinden und makroskopische Systeme zu entwickeln, die intelligente und kommunizierende Materialien zur Anzeige von mechanischen Belastungen in einer Vielzahl von Anwendungen ermöglichen. KW - Nanopartikel KW - Indikator KW - Scherverhalten KW - Fluoreszenz KW - Mikropartikel KW - Supraparticle KW - Shear stress indicator Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-352819 ER - TY - JOUR A1 - Denk, S. A1 - Schmidt, S. A1 - Schurr, Y. A1 - Schwarz, G. A1 - Schote, F. A1 - Diefenbacher, M. A1 - Armendariz, C. A1 - Dejure, F. A1 - Eilers, M. A1 - Wiegering, Armin T1 - CIP2A regulates MYC translation (via its 5′UTR) in colorectal cancer JF - International Journal of Colorectal Disease N2 - Background Deregulated expression of MYC is a driver of colorectal carcinogenesis, suggesting that decreasing MYC expression may have significant therapeutic value. CIP2A is an oncogenic factor that regulates MYC expression. CIP2A is overexpressed in colorectal cancer (CRC), and its expression levels are an independent marker for long-term outcome of CRC. Previous studies suggested that CIP2A controls MYC protein expression on a post-transcriptional level. Methods To determine the mechanism by which CIP2A regulates MYC in CRC, we dissected MYC translation and stability dependent on CIP2A in CRC cell lines. Results Knockdown of CIP2A reduced MYC protein levels without influencing MYC stability in CRC cell lines. Interfering with proteasomal degradation of MYC by usage of FBXW7-deficient cells or treatment with the proteasome inhibitor MG132 did not rescue the effect of CIP2A depletion on MYC protein levels. Whereas CIP2A knockdown had marginal influence on global protein synthesis, we could demonstrate that, by using different reporter constructs and cells expressing MYC mRNA with or without flanking UTR, CIP2A regulates MYC translation. This interaction is mainly conducted by the MYC 5′UTR. Conclusions Thus, instead of targeting MYC protein stability as reported for other tissue types before, CIP2A specifically regulates MYC mRNA translation in CRC but has only slight effects on global mRNA translation. In conclusion, we propose as novel mechanism that CIP2A regulates MYC on a translational level rather than affecting MYC protein stability in CRC. KW - CIP2A KW - MYC KW - translation KW - colon cancer Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280092 VL - 36 IS - 5 ER - TY - JOUR A1 - He, Tao A1 - Wu, Yanfei A1 - D'Avino, Gabriele A1 - Schmidt, Elliot A1 - Stolte, Matthias A1 - Cornil, Jérôme A1 - Beljonne, David A1 - Ruden, P. Paul A1 - Würthner, Frank A1 - Frisbie, C. Daniel T1 - Crystal step edges can trap electrons on the surfaces of n-type organic semiconductors JF - Nature Communications N2 - Understanding relationships between microstructure and electrical transport is an important goal for the materials science of organic semiconductors. Combining high-resolution surface potential mapping by scanning Kelvin probe microscopy (SKPM) with systematic field effect transport measurements, we show that step edges can trap electrons on the surfaces of single crystal organic semiconductors. n-type organic semiconductor crystals exhibiting positive step edge surface potentials display threshold voltages that increase and carrier mobilities that decrease with increasing step density, characteristic of trapping, whereas crystals that do not have positive step edge surface potentials do not have strongly step density dependent transport. A device model and microelectrostatics calculations suggest that trapping can be intrinsic to step edges for crystals of molecules with polar substituents. The results provide a unique example of a specific microstructure–charge trapping relationship and highlight the utility of surface potential imaging in combination with transport measurements as a productive strategy for uncovering microscopic structure–property relationships in organic semiconductors. KW - electronic and spintronic devices KW - electronic devices KW - scanning probe microscopy Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-227957 VL - 9 ER - TY - THES A1 - Beudert, Matthias T1 - Bioinspired Modification and Functionalization of Hydrogels for Applications in Biomedicine T1 - Biologisch-inspirierte Modifizierung und Funktionalisierung von Hydrogelen für Anwendungen in der Biomedizin N2 - Over the years, hydrogels have been developed and used for a huge variety of different applications ranging from drug delivery devices to medical products. In this thesis, a poly(2-methyl-2-oxazoline) (POx) / poly(2-n-propyl-2-oxazine) (POzi) bioink was modified and analyzed for the use in biofabrication and targeted drug delivery. In addition, the protein fibrinogen (Fbg) was genetically modified for an increased stability towards plasmin degradation for its use as wound sealant. In Chapter 1, a thermogelling, printable POx/POzi-based hydrogel was modified with furan and maleimide moieties in the hydrophilic polymer backbone facilitating post-printing maturation of the constructs via Diels-Alder chemistry. The modification enabled long-term stability of the hydrogel scaffolds in aqueous solutions which is necessary for applications in biofabrication or tissue engineering. Furthermore, we incorporated RGD-peptides into the hydrogel which led to cell adhesion and elongated morphology of fibroblast cells seeded on top of the scaffolds. Additional printing experiments demonstrate that the presented POx/POzi system is a promising platform for the use as a bioink in biofabrication. Chapter 2 highlights the versatility of the POx/POzi hydrogels by adapting the system to a use in targeted drug delivery. We used a bioinspired approach for a bioorthogonal conjugation of insulin-like growth factor I (IGF-I) to the polymer using an omega-chain-end dibenzocyclooctyne (DBCO) modification and a matrix metalloprotease-sensitive peptide linker. This approach enabled a bioresponsive release of IGF-I from hydrogels as well as spatial control over the protein distribution in 3D printed constructs which makes the system a candidate for the use in personalized medicine. Chapter 3 gives a general overview over the necessity of wound sealants and the current generations of fibrin sealants on the market including advantages and challenges. Furthermore, it highlights trends and potential new strategies to tackle current problems and broadens the toolbox for future generations of fibrin sealants. Chapter 4 applies the concepts of recombinant protein expression and molecular engineering to a novel generation of fibrin sealants. In a proof-of-concept study, we developed a new recombinant fibrinogen (rFbg) expression protocol and a Fbg mutant that is less susceptible to plasmin degradation. Targeted lysine of plasmin cleavage sites in Fbg were exchanged with alanine or histidine in different parts of the molecule. The protein was recombinantly produced and restricted plasmin digest was analyzed using high resolution mass spectrometry. In addition to that, we developed a novel time resolved screening protocol for the detection of new potential plasmin cleavage sites for further amino acid exchanges in the fibrin sealant. N2 - Hydrogele wurden im Laufe der Jahre für eine Vielzahl von Anwendungen, von der Verabreichung von Medikamenten bis hin zu medizinischen Produkten, entwickelt und eingesetzt. In dieser Arbeit wurde eine Poly(2-methyl-2-oxazolin) POx) / Poly(2-n-propyl-2- oxazin) (POzi) Biotinte modifiziert und für den Einsatz in der Biofabrikation und für die gezielte Verabreichung von Medikamenten analysiert. Außerdem wurde das Protein Fibrinogen (Fbg) gentechnisch verändert, um seine Stabilität gegenüber dem Plasminabbau in seiner Funktion als Wundkleber zu erhöhen In Kapitel 1 wurde ein thermogelierendes, druckbares Hydrogel auf POx/POzi-Basis mit Furan- und Maleimid-Funktionen im hydrophilen Polymerrückgrat modifiziert, was die Reifung der Konstrukte nach dem Druck durch Diels-Alder-Chemie bewirkt. Die Modifizierung ermöglichte eine langfristige Stabilität der Hydrogele in wässrigen Lösungen, was für Anwendungen im Bereich der Biofabrikation oder im Tissue Engineering erforderlich ist. Darüber hinaus haben wir RGD-Peptide in das Hydrogel integriert, was zur Zelladhäsion und einer verlängerten Morphologie von Fibroblasten, die auf den Gelen ausgesät wurden, führte. Weitere Druckexperimente zeigen außerdem, dass das POx/POzi-System eine vielversprechende Plattform für den Einsatz als Biotinte in der Biofabrikation ist. Kapitel 2 unterstreicht die Vielseitigkeit der POx/POzi-Hydrogele, indem das System für die gezielte Abgabe von Medikamenten angepasst wird. Wir verwendeten einen von der Natur inspirierten Ansatz für eine biorthogonale Konjugation vom Insuline-like Growth Factor I (IGF- I) an das Polymer unter Verwendung einer Dibenzocyclooctin-Modifikation des Polymers am Ende der Omega-Kette und eines Matrix-Metalloproteasen-empfindlichen Peptid-Linkers. Dieser Ansatz ermöglichte eine bioresponsive Freisetzung von IGF-I aus Hydrogelen sowie eine räumliche Kontrolle über die Proteinverteilung in 3D-gedruckten Konstrukten, was das System zu einem Kandidaten für den Einsatz in der personalisierten Medizin macht. Kapitel 3 gibt einen allgemeinen Überblick über die Notwendigkeit von Wundversiegelungsmitteln und die derzeit auf dem Markt befindlichen Generationen von Fibrinklebern einschließlich der Vorteile und Herausforderungen. Darüber hinaus werden Trends und potenzielle neue Strategien zur Lösung aktueller Probleme und zur Erweiterung der Toolbox für künftige Generationen von Fibrinklebern aufgezeigt. In Kapitel 4 werden die Konzepte der rekombinanten Proteinexpression und des Molecular Engineering auf eine neue Generation von Fibrin Wundklebern angewandt. In einer Proof-of- Concept-Studie haben wir ein neues rekombinantes Fbg Expressionsprotokoll und eine Fbg Mutante entwickelt, die weniger anfällig für einen Abbau durch Plasmin ist. Gezielte Lysine in Plasmin-Schnittstellen in Fbg wurde entweder durch Alanin oder Histidin in unterschiedlichen Teilen des Moleküls ausgetauscht. Das Protein wurde rekombinant hergestellt und eine verminderte Schnittrate wurde mittels hochauflösender Massenspektrometrie gezeigt. Zusätzlich haben wir ein neues zeitaufgelöstes Screening-Protokoll entwickelt, mit dem sich neue potenzielle Plasmin-Spaltstellen für weitere Aminosäurenaustausche in Fibrin-Klebern auflösen lassen. KW - Hydrogel KW - Targeted drug delivery KW - 3 D bioprinting KW - Hydrogels KW - Modification KW - Bioinks KW - Fibrinogen KW - Drug Delivery Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322887 ER - TY - THES A1 - Endres, Erik T1 - Kovalente Inhibitoren: Modellierung und Design T1 - Covalent Inhibitors: Modeling and Design N2 - Kovalente Inhibition stellt einen effektiven Weg dar, die Verweildauer des Liganden innerhalb einer Bindetasche zu erhöhen. In dieser Arbeit wurden theoretische Methoden angewendet, um die Reaktivität und den nichtkovalenten Zustand vor der Reaktion zu modellieren. Im Rahmen einer Fallstudie zu Cathepsin K wurden nichtkovalente Modelle von kovalenten Inhibitoren generiert. Für verschiedene Komplexe aus Cathepsin K und einem kovalent gebundenem Liganden wurde der Zustand vor der Reaktion modelliert und dessen Stabilität im Rahmen einer klassischen MD-Simulation überprüft. Die Stabilität des Warheads in der Bindetasche hing hauptsächlich vom gewählten Protonierungszustand der katalytischen Aminosäuren ab. Für eine Reihe von Inhibitoren der ChlaDUB1 wurde ein Protokoll aus quantenmechanischen Rechnungen genutzt, um die Reaktivität verschiedener Warheads abzuschätzen. Die erhaltenen Aktivierungsenergien korrelierten mit experimentell bestimmten Raten zur Inaktivierung des Enzyms. Im Rahmen eines Wirkstoffdesign-Projektes zur Deubiquitinase USP28 wurden von unpublizierten Kristallstrukturen ausgehend erste Docking-Experimente durchgeführt. Es konnte gezeigt werden, dass ein literaturbekannter Inhibitor von USP28 mit einem Warhead so modifiziert werden kann, dass die reaktive Einheit in direkter Nachbarschaft zu einem Cystein positioniert wird. Für diese Warheads wurden ebenfalls quantenmechanische Rechnungen zur Bestimmung der Aktivierungsenergie durchgeführt. Um besser nachvollziehen zu können, warum bei einem Photoswitch-Inhibitor der Butyrylcholin-Esterase der cis-Zustand des Moleküls besser inhibiert als der trans-Zustand, wurde eine Docking-Studie des Zustandes vor der Reaktion durchgeführt. Es konnte ein qualitatives Modell aufgestellt werden, das zeigt, dass der trans-Zustand aufgrund seiner längeren Form mit wichtigen Aminosäuren am Eingang der Bindungstasche kollidiert. N2 - Covalent inhibition is an effective way to increase the residence time of a ligand within the active site. In this work theoretical methods were used to model the reactivity and the noncovalent pre-reaction state. Noncovalent models of covalent inhibitors were generated as part of a case study of Cathepsin K. Several complexes of Cathepsin K and a covalently bound ligand were modeled in their state before the reaction, and their stability was assessed by classical molecular dynamics simulations. In most cases the warhead was positioned in close proximity to the catalytic unit, remaining there for up to several hundred nanoseconds. This stable positioning was largely dependent on the protonation state of the catalytic amino acids. To estimate the reactivity of a series of ChlaDUB1 inhibitors, a protocol of quantum mechanical calculations was adapted. The obtained activation energies correlated with experimentally obtained rate constants of enzyme inactivation. Using unpublished crystal structures, first design steps for the inhibition of the deubiquitinase USP28 were performed. Docking studies showed that modification of a literature-known inhibitor of USP28 with a warhead allowed to place this reactive unit close to a cysteine. Activation energies were also obtained for these structures via quantum mechanical calculations. To better rationalize the differences in inhibition between the cis- and trans-state of a photoswitch inhibitor of butyrylcholine esterase, a docking study of the noncovalent state was performed. The different ring conformers and stereochemical properties of the photoswitch were critical for a sensible model of the ligand. A qualitative model could be obtained which explains that the cis-isomer is more active than the trans-isomer due to a steric clash of the latter with amino acids at the entrance of the pocket. KW - Molekulardynamik KW - Docking KW - Inhibitor KW - Computational chemistry KW - Arzneimitteldesign KW - Cathepsin KW - Deubiquitinasen KW - Kovalente Inhibitoren Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-359330 ER - TY - THES A1 - Ramirez, Yesid A. T1 - Structural basis of ubiquitin recognition and rational design of novel covalent inhibitors targeting Cdu1 from \(Chlamydia\) \(Trachomatis\) T1 - Strukturelle Grundlage der Ubiquitin-Erkennung und rationales Design neuer kovalenter Inhibitoren gegen die Deubiquitinylase Cdu1 aus \(Chlamydia\) \(Trachomatis\) N2 - The WHO-designated neglected-disease pathogen Chlamydia trachomatis (CT) is a gram-negative bacterium responsible for the most frequently diagnosed sexually transmitted infection worldwide. CT infections can lead to infertility, blindness and reactive arthritis, among others. CT acts as an infectious agent by its ability to evade the immune response of its host, which includes the impairment of the NF-κB mediated inflammatory response and the Mcl1 pro-apoptotic pathway through its deubiquitylating, deneddylating and transacetylating enzyme ChlaDUB1 (Cdu1). Expression of Cdu1 is also connected to host cell Golgi apparatus fragmentation, a key process in CT infections. Cdu1 may this be an attractive drug target for the treatment of CT infections. However, a lead molecule for the development of novel potent inhibitors has been unknown so far. Sequence alignments and phylogenetic searches allocate Cdu1 in the CE clan of cysteine proteases. The adenovirus protease (adenain) also belongs to this clan and shares a high degree of structural similarity with Cdu1. Taking advantage of topological similarities between the active sites of Cdu1 and adenain, a target-hopping approach on a focused set of adenain inhibitors, developed at Novartis, has been pursued. The thereby identified cyano-pyrimidines represent the first active-site directed covalent reversible inhibitors for Cdu1. High-resolution crystal structures of Cdu1 in complex with the covalently bound cyano-pyrimidines as well as with its substrate ubiquitin have been elucidated. The structural data of this thesis, combined with enzymatic assays and covalent docking studies, provide valuable insights into Cdu1s activity, substrate recognition, active site pocket flexibility and potential hotspots for ligand interaction. Structure-informed drug design permitted the optimization of this cyano-pyrimidine based scaffold towards HJR108, the first molecule of its kind specifically designed to disrupt the function of Cdu1. The structures of potentially more potent and selective Cdu1 inhibitors are herein proposed. This thesis provides important insights towards our understanding of the structural basis of ubiquitin recognition by Cdu1, and the basis to design highly specific Cdu1 covalent inhibitors. N2 - Der Krankheitserreger Chlamydia trachomatis (CT) - ein gramnegatives Bakterium - ist verantwortlich für die häufigste sexuell übertragene Infektionskrankheit weltweit, die CT basierte Chlamydiose. Sie wird von der Weltgesundheitsorganisation zu den vernachlässigten Krankheiten gezählt. CT Infektionen können unter anderem zu Unfruchtbarkeit, Erblindung und reaktiver Arthritis führen. CT agiert als Krankheitserreger mittels seiner Fähigkeit, die Immunantwort des Wirts zu umgehen. Dies umfasst unter anderem die Schwächung und Störung der NF-κB vermittelten Entzündungsantwort und des Mcl1 pro-Apoptoseweges über ihr deubiquitinierendes, deneddylierendes und trans-acetylierendes Enzym ChlaDub1 (Cdu1). Die Expression von Cdu1 ist aber auch mit der Fragmentierung des Golgi-Apparates des Wirtes verknüpft, ein Schlüsselprozess bei Infektionen mit CT. Cdu1 ist daher vermutlich ein attraktives Zielprotein für die Entwicklung von Wirkstoffen, um CT Infektionen zu behandeln. Eine Leitstrukturverbindung zur Entwicklung neuer wirksamer Inhibitoren war bislang jedoch noch nicht bekannt. Sequenzvergleiche und phylogenetische Untersuchungen verorten Cdu1 im CE Clan der Cysteinproteasen. Die Adenovirus-Protease (Adenain) gehört ebenfalls diesem Clan an und besitzt strukturelle Ähnlichkeit mit Cdu1. Unter Ausnutzung der topologischen Ähnlichkeiten der aktiven Zentren von Cdu1 und Adenain wurde ein Target-Hopping Ansatz mit einem klar definierten und fokussierten Satz von bei Novartis entwickelten Adenain-Inhibitoren verfolgt. Die hierbei identifizierten Cyano-Pyrimidine stellen die ersten kovalenten Inhibitoren von Cdu1 dar, die an das aktive Zentrum von Cdu1 binden und es direkt adressieren. Hochauflösend wurden Kristallstrukturen sowohl von Komplexen von Cdu1 mit kovalent gebundenen Cyano-Pyrimidinen als auch mit Cdu1’s natürlichem Substrat Ubiquitin bestimmt. Die Kristallstrukturdaten dieser Doktorarbeit in Kombination mit Enzymassays und kovalenten Docking-Studien liefern wertvolle Hinweise bezüglich der Aktivität des Enzyms, der molekularen Substraterkennung, der Flexibiliät der Proteintasche rund um das aktive Zentrum und potentielle Hotspots für die Wechselwirkung mit Liganden. Ein strukturbasiertes Wirkstoffdesign erlaubte die Optimierung des Cyano-Pyrimidin-basierten Molekülgerüstes, die zu der Entwicklung der HJR108 Verbindung führte. Es ist das erste Molekül seiner Art, das speziell dazu entworfen wurde Cdu1 zu inhibieren. Strukturen potentiell noch wirksamerer und selektiver Cdu1 Inhibitoren werden in dieser Arbeit vorgeschlagen. Diese Dissertationsschrift liefert somit wertvolle Beiträge zum Verständnis der strukturellen Grundlagen der molekularen Erkennung von Ubiquitin durch Cdu1 und Hinweise, die die Entwicklung hoch-spezifischer kovalenter Cdu1 Inhibitoren erlauben sollten. KW - CE Proteaes KW - covalent inhibition KW - drug repurposing KW - DUB KW - Ubiquitin KW - Inhibitor KW - Chlamydia trachomatis Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-191683 ER - TY - JOUR A1 - Balasubramanian, Srikkanth A1 - Skaf, Joseph A1 - Holzgrabe, Ulrike A1 - Bharti, Richa A1 - Förstner, Konrad U. A1 - Ziebuhr, Wilma A1 - Humeida, Ute H. A1 - Abdelmohsen, Usama R. A1 - Oelschlaeger, Tobias A. T1 - A new bioactive compound from the marine sponge-derived Streptomyces sp. SBT348 inhibits staphylococcal growth and biofilm formation JF - Frontiers in Microbiology N2 - Staphylococcus epidermidis, the common inhabitant of human skin and mucosal surfaces has emerged as an important pathogen in patients carrying surgical implants and medical devices. Entering the body via surgical sites and colonizing the medical devices through formation of multi-layered biofilms leads to refractory and persistent device-related infections (DRIs). Staphylococci organized in biofilms are more tolerant to antibiotics and immune responses, and thus are difficult-to-treat. The consequent morbidity and mortality, and economic losses in health care systems has strongly necessitated the need for development of new anti-bacterial and anti-biofilm-based therapeutics. In this study, we describe the biological activity of a marine sponge-derived Streptomyces sp. SBT348 extract in restraining staphylococcal growth and biofilm formation on polystyrene, glass, medically relevant titan metal, and silicone surfaces. A bioassay-guided fractionation was performed to isolate the active compound (SKC3) from the crude SBT348 extract. Our results demonstrated that SKC3 effectively inhibits the growth (MIC: 31.25 \(\mu\)g/ml) and biofilm formation (sub-MIC range: 1.95-<31.25 \(\mu\)g/ml) of S. epidermidis RP62A in vitro. Chemical characterization of SKC3 by heat and enzyme treatments, and mass spectrometry (HRMS) revealed its heat-stable and non-proteinaceous nature, and high molecular weight (1258.3 Da). Cytotoxicity profiling of SKC3 in vitro on mouse fibroblast (NIH/3T3) and macrophage (J774.1) cell lines, and in vivo on the greater wax moth larvae Galleria mellonella revealed its non-toxic nature at the effective dose. Transcriptome analysis of SKC3 treated S. epidermidis RP62A has further unmasked its negative effect on central metabolism such as carbon flux as well as, amino acid, lipid, and energy metabolism. Taken together, these findings suggest a potential of SKC3 as a putative drug to prevent staphylococcal DRIs. KW - marine sponges KW - Streptomyces KW - Staphylococci KW - device-related infections KW - bioassay-guided fractionation KW - transcriptome Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-221408 VL - 9 ER -