TY - THES A1 - Güthlein, Frank T1 - Übergangsmetallkatalysierte Synthese von Diboranen(4) T1 - Transition Metal catalyzed Synthesis of Diboranes(4) N2 - Die Diborane(4) Bis(catecholato)diboran und Bis(pinakolato)diboran können durch homogene und heterogene Katalysatoren durch eine Dehydrokupplungsreaktion ausgehend von Catecholboran und Pinakolboran dargestellt werden. Der effizienteste Katalysator für diese Reaktion ist Platin auf Aluminiumoxid, wobei Umsatzzahlen von maximal 11600 und Umsatzfrequenzen von 444 1/h erreicht werden. N2 - The diboranes(4) bis(catecholato)diborane and bis(pinacolato)diborane are synthesized under homogeneous and heterogeneous catalytic conditions starting from catecholborane and pinacolborane via a dehydrocoupling reaction. The most efficient catalyst is platinum on alumina, affording a maximum turnover number of 11600 and a maximum turnover frequency of 444 1/h. KW - Heterogene Katalyse KW - Homogene Katalyse KW - Diborane KW - Bis(catecholato)diboran KW - Bis(pinakolato)diboran KW - Diboran(4) KW - Catalysis KW - Diborane(4) Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-71013 ER - TY - THES A1 - Hördegen, Simone T1 - Überlegungen zu einer sich selbst steuernden Wirbelschichtanlage N2 - Eines der größten Probleme bei Granulationsprozessen in der pharmazeutischen Industrie ist die Feuchtigkeit der Prozessluft. Kann bzw. möchte man die Luft aus ökonomischen oder sonstigen Gründen hinsichtlich ihres absoluten Feuchtgehalts nicht konditionieren, bleibt bei hoher Luftfeuchte – wie sie z.B. beim Aufzug eines Gewitters oder bei heftigen Regenfällen auftritt – oft nur die Option des Produktionsstillstandes. Die vorliegende Arbeit befasst sich einerseits mit der Frage, ob es möglich ist, unabhängig von den Außenluftbedingungen – wie Temperatur, Druck und relative Feuchte – Granulate mit vergleichbaren Eigenschaften zu reproduzieren. Zum anderen soll geklärt werden, welchen Einfluss verschiedene Prozess- und Materialparameter bzw. deren Schwankungen auf das Endprodukt haben, und was dies wiederum für eine Automatisierung des Prozesses bzw. für die Anforderungen an eine Steuer- und Regelung der Herstellanlage bedeutet. Ausgehend von der Massenbilanzierung einer Wirbelschichtgranulierung wird der Einfluss verschiedener Prozess- und Materialparameter auf ein Standardgranulat untersucht. Die Ergebnisse der unterschiedlichen Versuchsreihen bestätigen einerseits die Reproduzierbarkeit von Granulateigenschaften basierend auf den Berechnungen der kritischen Sprührate. Andererseits zeigen sie den Einfluss verschiedener Prozess- und Materialparameter auf die Qualität des Endproduktes. Hieraus können wichtige Erkenntnisse für eine automatische Steuer- und Regelung der Herstellanlage abgeleitet und entsprechende Sollanforderungen für jeden einzelnen Prozessparameter sowie die überwachenden Sensoren definiert werden. Die Berechnungen zur Machbarkeit eines Granulatansatzes sind eine wertvolle Entscheidungsgrundlage hinsichtlich der Planung einer Granulatherstellung und dienen auch für eine Ansatzvergrößerung als Kalkulationsbasis. Ebenso kann die Algorithmenabfolge der „kritischen Sprührate“ zusammen mit den Formeln der „Berechnungen zur Machbarkeit“ für die Anpassung der Prozessparameter an die jahres- und tageszeitlichen Schwankungen der Außenluft herangezogen werden. Wie theoretische Studien zum „Ausgleich der Außenluftbedingungen“ aufzeigen, ist es mit Hilfe dieser Algorithmen möglich, die freie Feuchte während der Sprühphase auf ein definiertes Niveau zu bringen und dort zu halten. Dieser Anteil an überschüssigem Wasser ist primär für das Kornwachstum und somit für die Reproduktion von Granulaten verantwortlich. Die vorliegende Arbeit stellt mit ihren theoretischen Ansätzen einen entscheidenden Schritt hin zu einer automatisierten Wirbelschichtanlage dar. Sie zeigt Ansatzpunkte für ein mögliches Vorgehen auf und liefert Hinweise für die Anforderungen an Messsensoren sowie Steuer- und Regeleinheiten. N2 - The humidity of the inlet air is one of the largest problems within granulation pro-cesses in the pharmaceutical industry. Is it not possible to condition the inlet air in reference to its absolute moisture, there often only remains the alternative to stop production. One topic of the existent dissertation deals with the question wether it is possible to produce granulates of comparable characteristics independent from the conditions of external air like temperature, pressure and moisture. On the other hand it is examined which influence several process and material parameters or rather their variations have on the final product and what that means for an automation of the process or the specification of production plant control and regulation. Based on the mass balance of a fluidized bed granulation the effects of different process and material parameters on a standard granulate are proved. On the one hand the re-sults of the different test series attest the reproducibility of granulate characteristics based on the calculations of the critical spray rate. Otherwise they point out the in-fluence of several process and material parameters on the quality of the end product. Based on these results important perceptions for an automated control system and regulation of the production plant can be deflected and adequate requirements for every single process parameter as well as for supervising sensors can be defined. The calculation of the practicability of batches is a significant foundation for a deci-cion in reference to batch planning and provides a basis for scaling up processes. Apart from that the algorithms are able to adapt the process parameters to the daily and annually variations of the inlet air. Theoretical studies to “adjustment of inlet air conditions” show, that thanks to the calculations it is possible to bring the free mois-ture to a defined level during spraying. This part of excessive water is responsible for agglomeration and therefore for the reproduction of granulates. The existing disser-tation represents an important step to an automated fluidised bed granulator. It shows approaches for possible proceeding and provides precious indications for re-quirements of measuring sensors as well as for control systems and regulation units. KW - Wirbelschichtverfahren KW - Granulieren KW - Luftfeuchtigkeit KW - Wirbelschichtgranulation KW - Automatisierung KW - Außenluftfeuchte KW - fluidised bed granulation KW - automation KW - air humidity Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-15166 ER - TY - THES A1 - Bejan, Iulia Cornelia T1 - Übertragung von Si=Si-Doppelbindungen auf organische Substrate: Stabile konjugierte Systeme vs. Umlagerungsreaktionen T1 - Transfer of Si=Si double bonds on organic substrates: Stable conjugated systems vs. rearrangement reactions N2 - In dieser Arbeit wurde die Synthese und Charakterisierung von Systemen mit mehreren phenylen- oder vinylen-konjugierten Si=Si- bzw. C=Si-Doppelbindungen angestrebt. An diesen Verbindungen wurde die Art der Wechselwirkung sowie der Grad der Konjugation zwischen siliciumhaltigen Doppelbindungen und aromatischen Verknüpfungseinheiten untersucht. Auf diese Weise wurde die Grundlage für die Darstellung von Polymeren auf Basis dieser Bauelemente bereitet, um die aktuellen Entwicklungen von P=C- und P=P- Doppelbindungssystemen hin zu schwereren Analoga von Polyphenylenvinylen Copolymeren nachvollziehen zu können. N2 - In this thesis was shown that disilenide, i. e. disila analogue to vinyl anion, constitute an excellent reagent for the synthesis of new compounds with conjugated Si=Si double bonds. On the first model system for the silicon analogues of poly(phenylene-vinylene)s (PPVs) was established the conjugation of the two Si=Si moieties over the phenylene bridge. New compounds bearing cyclic and bicyclic structures were synthesised by the reaction of disilenid with unsaturated electrophiles. In a midterm time frame the availability of compounds with more than one Si=Si units will offer an alternative access to siliconpolymers. Moreover, the unique dual reactivity of disilenid provides new synthesic routes for the difficult access to the polycyclic ringsystems incorporating silicon atoms. KW - Doppelbindung KW - Silicium KW - Konjugiertes System KW - Umlagerung KW - Si=Si-Doppelbindung KW - silicon KW - double bonds KW - conjugated systems Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-51863 ER - TY - JOUR A1 - Hegmann, J. A1 - Ditterich, E. A1 - Hüttner, G. A1 - Christl, Manfred A1 - Peters, K. A1 - Peters, E.-M. A1 - Schnering, H. G. von T1 - δ-Chlor-δ-lactone aus γ-Oxoketenen N2 - No abstract available KW - Organische Chemie KW - 1 KW - 3 KW - 4-0xadiazine-2-carboxylate KW - methyl 6-oxo-5-phenyl- KW - Diels-Alder reactions KW - Ketenes KW - y-oxo- KW - δ-Lactones KW - δ-chloro- KW - β-Lactones Y1 - 1992 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58649 ER - TY - JOUR A1 - Schnitzlein, Matthias A1 - Zhu, Chongwei A1 - Shoyama, Kazutaka A1 - Würthner, Frank T1 - π‐Extended Pleiadienes by [5+2] Annulation of 1‐Boraphenalenes and ortho‐Dihaloarenes JF - Chemistry – A European Journal N2 - Palladium‐catalyzed [5+2] annulation of 1‐boraphenalenes with ortho‐dihaloarenes afforded negatively curved π‐extended pleiadienes. Two benzo[1,2‐i:4,5‐i’]dipleiadienes (BDPs) featuring a seven‐six‐seven‐membered ring arrangement were synthesized and investigated. Their crystal structure revealed a unique packing arrangement and theoretical calculations were employed to shed light onto the dynamic behavior of the BDP moiety and its aromaticity. Further, a naphthalene‐fused pleiadiene was stitched together by oxidative cyclodehydrogenation to yield an additional five‐membered ring. This formal azulene moiety led to distinct changes in optical and redox properties and increased perturbation of the aromatic system. KW - annulation KW - aromaticity KW - azulene KW - cyclodehydrogenation KW - polycyclic aromatic hydrocarbons Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-293919 VL - 28 IS - 61 ER - TY - JOUR A1 - Lambert, Christoph A1 - Kaupp, Martin A1 - Schleyer, Paul von Rague T1 - “Inverted” Sodium-Lithium Electronegativity: Polarity and Metalation Energies of Organic and Inorganic Alkali-Metal Compounds N2 - No abstract available KW - Anorganische Chemie Y1 - 1993 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-60054 ER -