TY - THES A1 - Müller, Kerstin T1 - Einzelmolekül- und Ensemble-Fluoreszenzstudien an funktionalisierten, halbleitenden Kohlenstoffnanoröhren T1 - Single molecule and ensemble fluorescence studies on functionalized, semiconducting carbon nanotubes N2 - Ziel dieser Dissertation war es zu einem besseren Verständnis hinsichtlich folgender Themen beizutragen und Möglichkeiten aufzuzeigen, mit welchen die Voraussetzungen für Anwendungen von einzelnen, funktionalisierten Kohlenstoffnanoröhren, wie u.a. Einzelphotonenquellen, erfüllt werden können. Eine wesentliche Voraussetzung für die Funktionalisierung von einzelnen Kohlenstoffnanoröhren ist zunächst eine Probenpräparation, welche SWNT-Suspensionen mit einem hohen Anteil an vereinzelten SWNTs hoher PL-Intensität bereitstellen kann. Um solche SWNT-Suspensionen herstellen zu können, wurden drei verschiedene Rohmaterialien und Dispergiermittel auf deren Entbündelungseffizienz- und relativer Photolumineszenzquantenausbeute untersucht. Anhand von photolumineszenzspektroskopischen Untersuchungen und Messungen der Extinktion stellte sich heraus, dass in Kombination des unaufbereiteten CVD-Kohlenstoffnanorohrrußes mit dem Copolymer PFO:BPy als Dispergiermittel und einem speziell in dieser Dissertation entwickelten Herstellungsverfahren für die Mikroskopieproben, stabile (6,5)-SWNT-Suspensionen mit einem großen Anteil an einzelnen SWNTs hoher PL-Intensität, hergestellt werden können. Letztere Suspension diente als Ausgangsmaterial für die, in dieser Dissertation neuartige, entwickelte Methodik zur Differenzierung zwischen einzelnen SWNTs und Aggregaten mittels PL- und Ramanmessungen an einem PL-Mikroskopie-Aufbau, welche eine weitere Voraussetzung für Einzelpartikelstudien darstellt. Hierbei wurden im Rahmen einer statistischen Messreihe PL- und Ramanspektren von 150 SWNT-Objekten aufgenommen und hieraus resultierend die Parameter FWHM, Energie des S1-Emissions-Zustands und relative Photolumineszenzquantenausbeute ermittelt. Schließlich konnten die zwischen einer einzelnen SWNT und einem Aggregat charakteristischen Differenzen anhand der Korrelationen zwischen den drei Parametern dargestellt werden. Zudem erfolgte eine statistische Analyse zur Bestimmung der statistischen Signifikanz dieser Korrelationen. Hierbei wurde anhand der nicht-parametrischen Spearman-Korrelationskoeffizienten und der p-Werte gezeigt, dass in Kombination dieser drei Messparameter mit einer hohen Wahrscheinlichkeit zwischen einer einzelnen SWNT und einem Aggregat differenziert werden kann. Demnach konnte eine neuartige, im Vergleich zur Literatur, praktikable Methodik zur Differenzierung zwischen einzelnen SWNTs und Aggregaten, etabliert werden, welche die Voraussetzung für Einzelrohrstudien ist. Der Fokus dieser Dissertation ist die Entschlüsselung der Reaktionsmechanismen der Arylierung und reduktiven Alkylierung von (6,5)-SWNTs im Ensemble und auf Einzelrohrbasis. Durch diese kovalenten Funktionalisierungsverfahren entstehen neue fluoreszierende Defekt-Zustände, deren zeitabhängiges Intensitätsverhalten in der vorliegenden Arbeit näher untersucht wurde. Hinsichtlich der Arylierung von SWNTs mit Diazoniumsalzen postulieren Studien einen zweistufigen Reaktionsmechanismus, welcher durch eine kombinatorische, spektroskopische Gesamtbetrachtung im Rahmen dieser Dissertation bestätigt werden konnte. Auch konnte erstmalig in der Literatur gezeigt werden, dass die Reaktion in hohem Maße reproduzierbar ist. Reproduzierbarkeitsstudien wurden auch im Falle der reduktiven Alkylierung unternommen, wobei erstmalig festgestellt wurde, dass diese Reaktion lediglich im hohen Maße reproduzierbar ist, sofern die Reduktionslösung mindestens 17 Stunden vor Reaktionsstart angesetzt wird. Basierend auf diesem Resultat, wurden reproduzierbare Messreihen zur Untersuchung der Reaktionsbedingungen und des Reaktionsmechanismus unternommen, da diesbezüglich unzureichend Kenntnis in der Literatur vorhanden ist. Zur Klärung des Reaktionsmechanismus, von welchem lediglich Annahmen existieren, wurde zum einen der Einfluss der Laseranregung auf die Reaktion untersucht. Da lediglich für den Falle des Ansetzens der Reduktionslösung unmittelbar vor Messbeginn, wobei die reaktiven SO2- -Radikale erzeugt werden, ein Einfluss der Laseranregung festgestellt werden konnte, nicht jedoch im weiteren Reaktionsverlauf, ist von keiner radikalischen Reaktion im Funktionalisierungsschritt auszugehen. Dies konnte durch den Einsatz von Konstitutionsisomeren des Iodbutans bestätigt werden, wobei das Iodbutanisomer, welches im Fall einer radikalischen Reaktion die höchste Reaktivität zeigen sollte, zu keiner Funktionalisierung der SWNTs führte. Im Gegensatz hierzu, konnte durch das 1-Iodbutan, mit dem primären C-Atom, eine hohe PL-Intensität der defekt-induzierten Zustände E11- und T- verzeichnet werden, was die weitere Annahme einer SN2-Reaktion stützt. Im Rahmen dieser Dissertation konnte zudem erstmalig entdeckt werden, dass unter deren alkalischen, reduktiven Bedingungen, eine Funktionalisierung mit Acetonitril erfolgen kann, was durch die Durchstimmung der PL-Intensität des Defektzustands bei Variation des Volumenanteils von Acetonitril bestätigt werden konnte. Hierbei gilt es jedoch weiter zu analysieren, auf welche Art die Koordination bzw. Funktionalisierung von Acetonitril an den SWNTs erfolgt, was u.a. durch Ramanmessungen untersucht werden könnte. Auch konnten neuartige Kenntnisse bezüglich der Reaktionskinetik basierend auf den Studien dieser Dissertation erhalten werden, wobei festgestellt wurde, dass das Reaktionsprofil mit dem einer komplexen Folgereaktion angenähert werden kann. Zudem konnten neuartige Kenntnisse aus der Thermodynamik, wie die Ermittlung der Aktivierungsenergie der Adsorption von DOC-Molekülen auf der SWNT-Oberfläche, durch die Zugabe des Tensids DOC zum Reaktionsansatz und dem hieraus resultierenden Reaktionsabbruch, erhalten werden. Schließlich fand eine Übertragung der Ergebnisse aus den Ensemblestudien der reduktiven Alkylierung auf Einzelpartikeluntersuchungen statt, wobei letztere erstmalig im Rahmen dieser Arbeit durchgeführt wurden. Aus der statistischen Analyse, welche von Martina Wederhake durchgeführt wurde, resultierte durch Erhöhung des Stoffmengenverhältnisses von 1-Iodbutan zu Kohlenstoff eine inhomogene Steigerung des Funktionalisierungsgrades. Ausblickend gilt es nun zu prüfen, ob die zeitlichen Reaktionsverläufe der photolumineszierenden Zustände, welche aus den Ensemble-Studien erhalten wurden, auf Einzelrohrbasis reproduziert werden können. Es lässt sich demnach festhalten, dass mithilfe der Studien dieser Dissertation ein Probenherstellungsverfahren, welches stabile SWNT-Suspensionen mit einem großen Anteil an einzelnen Kohlenstoffnanoröhren, hoher PL-Intensität ermöglicht, etabliert werden konnte. Zudem wurde eine neuartige, praktikable und statistisch signifikante Methodik zur Differenzierung zwischen einzelnen Kohlenstoffnanoröhren und Aggregaten entwickelt. Schließlich konnten neue, essentielle Informationen bezüglich des Reaktionsmechanismus und den Reaktionsbedingungen der Arylierung und reduktiven Alkylierung von halbleitenden (6,5)-SWNTs erhalten werden. Wie in der Einleitung bereits erwähnt, sind sowohl der Erhalt einer stabilen SWNT-Suspension mit einem großen Anteil an einzelnen Nanoröhren hoher PL-Intensität, die Möglichkeit der Identifizierung einzelner SWNTs, als auch ein ausgiebiges Verständnis der Reaktionsmechanismen der Funktionalisierungsreaktionen, essentielle Voraussetzungen für die Verwirklichung von Einzelphotonenquellen auf Basis einzelner, funktionalisierter Kohlenstoffnanoröhren. Diese können aufgrund derer geeigneter Emissionseigenschaften als vielversprechende Kandidaten für das Ausgangsmaterial von Einzelphotonenquellen in der Quanteninformationstechnologie angesehen werden. N2 - The motivation of the present thesis was to obtain a better understanding considering the following topics and to show possibilities with the aid of which the requirements for the realization of applications based on single functionalized carbon nanotubes, e.g. single-photon-sources, can be fullfilled. For single-particle studies a SWNT suspension with a high amount of individual and bright carbon nanotubes is needed. Therefore different carbon nanotube soots and dispersing agents were used to determine the unbundling efficiency and relative photoluminescence quantum yield of the resulting suspensions. It turned out that by using the homemade CVD soot with the copolymer PFO:BPy as the dispersing agent and by means of a special developed preparation method of the microscope samples, stabilized SWNT suspensions with a huge amount of individualzed SWNTs with a high PL-intensity could be obtained. Consequently based on this thesis a practically new method was developped by using photoluminescence and raman microscopy. As the source material of this study, the mentioned suspension resulting from CVD soot and PFO:BPy was used. In this context pl and raman spectra of 150 SWNT objects were taken and the parameter FWHM, energy of the first exzitonic subband S1 of the pl spectra and the relative photoluminescence quantum yield were obtained. The characteristical trends concerning the optical properties of aggregates and individual carbon nanotubes could be observed by means of the correlations between the three parameters. However, the standard deviations of the results were quite high, for which reason a statistical analysis has been done to proove the statistical significance of the data. Hereby the non-parametric spearman correlation coefficients and the p-values were determined. It turned out that by the combination of this three parameters one could distinguish with a high probability individual SWNT from aggregates which is the requirement for single-particle studies. As mentioned at the beginning of this work the main aim of this thesis was to get a better understanding of the reaction mechanism and conditions of the arylation and reductive alkylation on (6,5)-SWNTs in solution and on single-particle level. As a result of this functionalization reactions new fluorescent defect-states are formed whose time-dependent intensity behaviour is analyzed among this thesis. Concerning the arylation of SWNTs with diazonium salts a two-step radical chain mechanism is assumed which could be confirmed by viewing the reaction in its spectroscopic entirety during this thesis. Finally it turned out that the arylation of swnts as it is done in this work is highly reproducible. Studies on the reproducibility also have been done for the case of the reductive alkylation. It has become clear that it is very important to prepare the alkaline solution of the reducing agent sodium dithionite at least 17 hours before measurement. Based on this result, reproducible measurements were done to anazyle the reaction conditions and mechanism, as the reaction is not well understood yet in literature. To get a better insight into the reaction mechanism of the redutive alkylation the influence of the laser excitation was studied. It turned out that just in case for the reaction run whereby the sodium dithionit solution was prepared immediately before the measurement, a dependence on the pl intensity of the defect state from laser excitation could be oberved. This is explained by the stepe where the SO2- -radicals are generated. As there is no dependency in the further reaction process no radical reactions are present in the reductive alkylation. This observation could be confirmed by the use of iodobutane constitution isomers as they have the contrary reaction reactivities for the radical and the SN2 pathway. It turned out that the primary 1-iodobutane shows the highest reactivity by the presence of an intensive defect state in the pl spectra, whereby no defect state could be generated by means of the tertiary 2-iodo-2-methylpropane. Therefore it is likely that the reductive alkylation runs via the SN2 pathway. Besides by means of this thesis it could be observed for the first time, that under these reductive conditions, acetonitrile is also available to functionalize the SWNTs even in the absence of haloalkanes. This could be confirmed with the tuning of the defect induced pl intensity by a varying ratio of the volumina of acetonitrile. However, the way how acetonitrile functionalizes the SWNTs must be analyzed in further experiments. This could be done by raman measurements. Additionaly new results concerning the reaction's kinetic could be obtained by the studies during this thesis, as the time dependent behaviour of the defect induced pl intensity is similiar to a complexe consecutive reaction and the reaction's rates are proportional to the amount of functionalization agent. To get new information about the thermodynamics of the reaction, DOC was added to abort the reaction. Due to an exchange of the SDS and unreactive molecules of acetonitrle and 1-iodobutane by DOC on the SWNT-surface adsorption isotherms could be observed with the start of the DOC addition and the saturation of the pl intensity of the defect state E11-. Finally the results of the ensemble studies of the reductive alkylation were transferred to the single-particle level to get information about the distribution of the defect centers on the individual SWNT. By means of a statistical analysis which has been done by Martina Wederhake an inhomogeneous distribution of sp3 defect centers on the SWNT surface was obtained as the amount of the functionalization agent was enhanced. For the future, it should be examined if the time-dependent behaviour of the fluorescent states can be reproduced on single carbon nanotoubes. It can thus be concluded that by means of this thesis a procedure which enables stabilized SWNT suspensions with a huge amount of single SWNTs with a high pl-intensity could be established. Besides a new practically and statistical significant method for the differentiation between individual SWNTs and aggregates could be developped. Finally important information concerning the reaction mechanisms and reaction conditions of the arylation and reductive alkylation on semiconducting (6,5)-single wall carbon nanotubes could be obtained. As mentioned at the beginning of the thesis in the introduction a SWNT suspension with a huge amount of single SWNTs with a high pl-intensity, the possiblity to identify individualized SWNTs and a deep understanding of the functionalization reactions are essential requirements for the realization of single photon sources based on functionalized carbon nanotubes. Latter ones are promising candidates for the source material of single-photon sources in quantum information technology due to their suited emission properties. KW - Einwandige Kohlenstoff-Nanoröhre KW - Funktionalisierung KW - Spektroskopie KW - Einzelmolekülmikroskopie KW - Photolumineszenz KW - kovalente Funktionalisierung KW - covalent functionalization KW - reduktive Alkylierung KW - reductive alkylation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-209942 ER - TY - INPR A1 - Humeniuk, Alexander A1 - Bužančić, Margarita A1 - Hoche, Joscha A1 - Cerezo, Javier A1 - Mitric, Roland A1 - Santoro, Fabrizio A1 - Bonačić-Koutecky, Vlasta T1 - Predicting fluorescence quantum yields for molecules in solution: A critical assessment of the harmonic approximation and the choice of the lineshape function T2 - The Journal of Chemical Physics N2 - For the rational design of new fluorophores, reliable predictions of fluorescence quantum yields from first principles would be of great help. However, efficient computational approaches for predicting transition rates usually assume that the vibrational structure is harmonic. While the harmonic approximation has been used successfully to predict vibrationally resolved spectra and radiative rates, its reliability for non-radiative rates is much more questionable. Since non-adiabatic transitions convert large amounts of electronic energy into vibrational energy, the highly excited final vibrational states deviate greatly from harmonic oscillator eigenfunctions. We employ a time-dependent formalism to compute radiative and non-radiative rates for transitions and study the dependence on model parameters. For several coumarin dyes we compare different adiabatic and vertical harmonic models (AS, ASF, AH, VG, VGF, VH), in order to dissect the importance of displacements, frequency changes and Duschinsky rotations. In addition we analyze the effect of different broadening functions (Gaussian, Lorentzian or Voigt). Moreover, to assess the qualitative influence of anharmonicity on the internal conversion rate, we develop a simplified anharmonic model. We adress the reliability of these models considering the potential errors introduced by the harmonic approximation and the phenomenological width of the broadening function. KW - fluorescence quantum yield Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-199305 UR - https://doi.org/10.1063/1.5143212 N1 - Accepted Manuscript. N1 - This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in A. Humeniuk et al. J. Chem. Phys. 152, 054107 (2020); https://doi.org/10.1063/1.5143212 and may be found at https://doi.org/10.1063/1.5143212. ER - TY - INPR A1 - Titov, Evgenii A1 - Humeniuk, Alexander A1 - Mitric, Roland T1 - Comparison of moving and fixed basis sets for nonadiabatic quantum dynamics at conical intersections T2 - Chemical Physics N2 - We assess the performance of two different types of basis sets for nonadiabatic quantum dynamics at conical intersections. The basis sets of both types are generated using Ehrenfest trajectories of nuclear coherent states. These trajectories can either serve as a moving (time-dependent) basis or be employed to sample a fixed (time-independent) basis. We demonstrate on the example of two-state two-dimensional and three-state five-dimensional models that both basis set types can yield highly accurate results for population transfer at intersections, as compared with reference quantum dynamics. The details of wave packet evolutions are discussed for the case of the two-dimensional model. The fixed basis is found to be superior to the moving one in reproducing nonlocal spreading and maintaining correct shape of the wave packet upon time evolution. Moreover, for the models considered, the fixed basis set outperforms the moving one in terms of computational efficiency. KW - Nonadiabatic quantum dynamics Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-199225 UR - https://doi.org/10.1016/j.chemphys.2019.110526 N1 - Submitted version ER - TY - INPR A1 - Lindner, Joachim O. A1 - Sultangaleeva, Karina A1 - Röhr, Merle I. S. A1 - Mitric, Roland T1 - metaFALCON: A program package for automatic sampling of conical intersection seams using multistate metadynamics T2 - Journal of Chemical Theory and Computation N2 - The multistate metadynamics for automatic exploration of conical intersection seams and systematic location of minimum energy crossing points in molecular systems and its implementation into the software package metaFALCON is presented. Based on a locally modified energy gap between two Born–Oppenheimer electronic states as a collective variable, multistate metadynamics trajectories are driven toward an intersection point starting from an arbitrary ground state geometry and are subsequently forced to explore the conical intersection seam landscape. For this purpose, an additional collective variable capable of distinguishing structures within the seam needs to be defined and an additional bias is introduced into the off-diagonal elements of an extended (multistate) electronic Hamiltonian. We demonstrate the performance of the algorithm on the examples of the 1,3-butadiene, benzene, and 9H-adenine molecules, where multiple minimum energy crossing points could be systematically located using the Wiener number or Cremer–Pople parameters as collective variables. Finally, with the example of 9H-adenine, we show that the multistate metadynamics potential can be used to obtain a global picture of a conical intersection seam. Our method can be straightforwardly connected with any ab initio or semiempirical electronic structure theory that provides energies and gradients of the respective electronic states and can serve for systematic elucidation of the role of conical intersections in the photophysics and photochemistry of complex molecular systems, thus complementing nonadiabatic dynamics simulations. KW - Computational Chemistry KW - Metadynamics KW - Hydrogen KW - Hydrocarbons KW - Chemical Structure Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-199258 UR - https://doi.org/10.1021/acs.jctc.9b00029 N1 - This document is the Accepted Manuscript version of a Published Work that appeared in final form in Journal of Chemical Theory and Computation, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see Journal of Chemical Theory and Computation 2019, 15, 6, 3450-3460. https://doi.org/10.1021/acs.jctc.9b00029. ER - TY - INPR A1 - Lisinetskaya, Polina G. A1 - Mitric, Roland T1 - Collective Response in DNA-Stabilized Silver Cluster Assemblies from First-Principles Simulations T2 - The Journal of Physical Chemistry Letters N2 - We investigate fluorescence resonant energy transfer and concurrent electron dynamics in a pair of DNA-stabilized silver clusters. For this purpose we introduce a methodology for the simulation of collective optoelectronic properties of coupled molecular aggregates starting from first-principles quantum chemistry, which can be further applied to a broad range of coupled molecular systems to study their electro-optical response. Our simulations reveal the existence of low-energy coupled excitonic states, which enable ultrafast energy transport between subunits, and give insight into the origin of the fluorescence signal in coupled DNA-stabilized silver clusters, which have been recently experimentally detected. Hence, we demonstrate the possibility of constructing ultrasmall energy transmission lines and optical converters based on these hybrid molecular systems. KW - Metal clusters Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-198729 UR - https://doi.org/10.1021/acs.jpclett.9b03136 N1 - This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Journal of Physical Chemistry A, copyright © American Chemical Society after peer review. To access the final edited and published work see The Journal of Physical Chemistry Letters 2019, 10, 24, 7884-7889. https://doi.org/10.1021/acs.jpclett.9b03136. ER - TY - INPR A1 - Röder, Anja A1 - Petersen, Jens A1 - Issler, Kevin A1 - Fischer, Ingo A1 - Mitric, Roland A1 - Poisson, Lionel T1 - Exploring the Excited-State Dynamics of Hydrocarbon Radicals, Biradicals and Carbenes using Time-Resolved Photoelectron Spectroscopy and Field-Induced Surface Hopping Simulations T2 - The Journal of Physical Chemistry A N2 - Reactive hydrocarbon molecules like radicals, biradicals and carbenes are not only key players in combustion processes and interstellar and atmospheric chemistry, but some of them are also important intermediates in organic synthesis. These systems typically possess many low-lying, strongly coupled electronic states. After light absorption, this leads to rich photodynamics characterized by a complex interplay of nuclear and electronic motion, which is still not comprehensively understood and not easy to investigate both experimentally and theoretically. In order to elucidate trends and contribute to a more general understanding, we here review our recent work on excited-state dynamics of open-shell hydrocarbon species using time-resolved photoelectron spectroscopy and field-induced surface hopping simulations, and report new results on the excited-state dynamics of the tropyl and the 1-methylallyl radical. The different dynamics are compared, and the difficulties and future directions of time-resolved photoelectron spectroscopy and excited state dynamics simulations of open-shell hydrocarbon molecules are discussed. KW - Excited state dynamics KW - Hydrocarbon radicals KW - time-resolved photoelectron spectroscopy KW - field-induced surface hopping Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-198734 UR - https://doi.org/10.1021/acs.jpca.9b06346 N1 - This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Journal of Physical Chemistry A, copyright © American Chemical Society after peer review. To access the final edited and published work see Journal of Physical Chemistry A 2019, 123, 50, 10643-10662. https://doi.org/10.1021/acs.jpca.9b06346. ER - TY - INPR A1 - Titov, Evgenii A1 - Humeniuk, Alexander A1 - Mitric, Roland T1 - Exciton localization in excited-state dynamics of a tetracene trimer: A surface hopping LC-TDDFTB study T2 - Physical Chemistry Chemical Physics N2 - Excitons in the molecular aggregates of chromophores are key participants in important processes such as photosynthesis or the functioning of organic photovoltaic devices. Therefore, the exploration of exciton dynamics is crucial. Here we report on exciton localization during excited-state dynamics of the recently synthesized tetracene trimer [Liu et al., Org. Lett., 2017, 19, 580]. We employ the surface hopping approach to nonadiabatic molecular dynamics in conjunction with the long-range corrected time-dependent density functional tight binding (LC-TDDFTB) method [Humeniuk and Mitrić, Comput. Phys. Commun., 2017, 221, 174]. Utilizing a set of descriptors based on the transition density matrix, we perform comprehensive analysis of exciton dynamics. The obtained results reveal an ultrafast exciton localization to a single tetracene unit of the trimer during excited-state dynamics, along with exciton transfer between units. KW - Exciton dynamics Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-198680 UR - https://doi.org/10.1039/C8CP05240A N1 - Accepted Manuscript ER - TY - INPR A1 - Auerhammer, Nina A1 - Schulz, Alexander A1 - Schmiedel, Alexander A1 - Holzapfel, Marco A1 - Hoche, Joscha A1 - Röhr, Merle I. S. A1 - Mitric, Roland A1 - Lambert, Christoph T1 - Dynamic exciton localisation in a pyrene-BODIPY-pyrene dye conjugate T2 - Physical Chemistry Chemical Physics N2 - The photophysics of a molecular triad consisting of a BODIPY dye and two pyrene chromophores attached in 2-position are investigated by steady state and fs-time resolved transient absorption spectroscopy as well as by field induced surface hopping (FISH) simulations. While the steady state measurements indicate moderate chromophore interactions within the triad, the time resolved measurements show upon pyrene excitation a delocalised excited state which localises onto the BODIPY chromophore with a time constant of 0.12 ps. This could either be interpreted as an internal conversion process within the excitonically coupled chromophores or as an energy transfer from the pyrenes to the BODIPY dye. The analysis of FISH-trajectories reveals an oscillatory behaviour where the excitation hops between the pyrene units and the BODIPY dye several times until finally they become localised on the BODIPY chromophore within 100 fs. This is accompanied by an ultrafast nonradiative relaxation within the excitonic manifold mediated by the nonadiabatic coupling. Averaging over an ensemble of trajectories allowed us to simulate the electronic state population dynamics and determine the time constants for the nonradiative transitions that mediate the ultrafast energy transfer and exciton localisation on BODIPY. KW - Exciton localization dynamics Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-198718 UR - https://doi.org/10.1039/C9CP00908F N1 - Accepted manuscript ER - TY - JOUR A1 - Verma, Pramod Kumar A1 - Steinbacher, Andreas A1 - Schmiedel, Alexander A1 - Nuernberger, Patrick A1 - Brixner, Tobias T1 - Excited-state intramolecular proton transfer of 2-acetylindan-1,3-dione studied by ultrafast absorption and fluorescence spectroscopy JF - Structural Dynamics N2 - We employ transient absorption from the deep-UV to the visible region and fluorescence upconversion to investigate the photoinduced excited-state intramolecular proton-transfer dynamics in a biologically relevant drug molecule, 2-acetylindan-1,3-dione. The molecule is a ß-diketone which in the electronic ground state exists as exocyclic enol with an intramolecular H-bond. Upon electronic excitation at 300 nm, the first excited state of the exocyclic enol is initially populated, followed by ultrafast proton transfer (≈160 fs) to form the vibrationally hot endocyclic enol. Subsequently, solvent-induced vibrational relaxation takes place (≈10 ps) followed by decay (≈390 ps) to the corresponding ground state. KW - time resolved spectroscopy KW - ground states KW - fluorescence spectra KW - absorption spectra KW - ultraviolet light KW - hydrogen bonding KW - excited states KW - reaction mechanisms KW - fluorescence KW - solvents Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-181301 VL - 3 ER - TY - THES A1 - Schmitt, Hans-Christian T1 - Deaktivierungsprozesse in isolierten aromatischen Heterocyclen und Pyrenen T1 - Deactivation processes in isolated aromatic heterocycles and pyrenes N2 - In der vorliegenden Arbeit wurde erfolgreich eine neue Gasphasen-Apparatur für Photoelektronen-Imaging-Experimente simuliert, aufgebaut und in Verbindung mit einem ps-Lasersystem in Betrieb genommen. Neben dem Aufbau der Apparatur stand die Aufklärung der Dynamik angeregter Zustände von aromatischen Heterocyclen und Pyrenen im Fokus dieser Arbeit. Die untersuchten Moleküle wurden durch Resonanzverstärkte Mehrphotonenionisation in einem Molekularstrahlexperiment sowohl zeit-, als auch frequenzaufgelöst untersucht. N2 - In the presented work a new gas phase apparatus for photoelectron imaging experiments was succesfully simulated, constructed and together with a ps laser system put into operation. Besides the building of the new apparatus, the focus of this work was set to elucidate the excited state dynamics of selected aromatic heterocycles and pyrenes. The examined molecules were investigated by frequency- and time-resolved resonance enhanced multi photon ionisation spectroscopy using a molecular beam experiment. KW - Laserspektroskopie KW - Massenspektrometrie KW - Angeregter Zustand KW - time-resolved spectroscopy Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-155445 ER - TY - JOUR A1 - Wohlgemuth, Matthias A1 - Miyazaki, Mitsuhiko A1 - Tsukada, Kohei A1 - Weiler, Martin A1 - Dopfer, Otto A1 - Fujii, Masaaki A1 - Mitrić, Roland T1 - Deciphering environment effects in peptide bond solvation dynamics by experiment and theory JF - Physical Chemistry Chemical Physics N2 - Most proteins work in aqueous solution and the interaction with water strongly affects their structure and function. However, experimentally the motion of a specific single water molecule is difficult to trace by conventional methods, because they average over the heterogeneous solvation structure of bulk water surrounding the protein. Here, we provide a detailed atomistic picture of the water rearrangement dynamics around the –CONH– peptide linkage in the two model systems formanilide and acetanilide, which simply differ by the presence of a methyl group at the peptide linkage. The combination of picosecond pump–probe time-resolved infrared spectroscopy and molecular dynamics simulations demonstrates that the solvation dynamics at the molecular level is strongly influenced by this small structural difference. The effective timescales for solvent migration triggered by ionization are mainly controlled by the efficiency of the kinetic energy redistribution rather than the shape of the potential energy surface. This approach provides a fundamental understanding of protein hydration and may help to design functional molecules in solution with tailored properties. KW - infrared-spectra KW - hydration dynamics KW - trans-formanilide KW - water migration KW - protein hydration Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159647 UR - http://pubs.rsc.org/en/content/articlelanding/2017/cp/c7cp03992a N1 - Accepted Version VL - 19 IS - 33 ER - TY - INPR A1 - Hoche, Joscha A1 - Schmitt, Hans-Christian A1 - Humeniuk, Alexander A1 - Fischer, Ingo A1 - Mitrić, Roland A1 - Röhr, Merle I. S. T1 - The mechanism of excimer formation: an experimental and theoretical study on the pyrene dimer T2 - Physical Chemistry Chemical Physics N2 - The understanding of excimer formation in organic materials is of fundamental importance, since excimers profoundly influence their functional performance in applications such as light-harvesting, photovoltaics or organic electronics. We present a joint experimental and theoretical study of the ultrafast dynamics of excimer formation in the pyrene dimer in a supersonic jet, which is the archetype of an excimer forming system. We perform simulations of the nonadiabatic photodynamics in the frame of TDDFT that reveal two distinct excimer formation pathways in the gas-phase dimer. The first pathway involves local excited state relaxation close to the initial Franck–Condon geometry that is characterized by a strong excitation of the stacking coordinate exhibiting damped oscillations with a period of 350 fs that persist for several picoseconds. The second excimer forming pathway involves large amplitude oscillations along the parallel shift coordinate with a period of ≈900 fs that after intramolecular vibrational energy redistribution leads to the formation of a perfectly stacked dimer. The electronic relaxation within the excitonic manifold is mediated by the presence of intermolecular conical intersections formed between fully delocalized excitonic states. Such conical intersections may generally arise in stacked π-conjugated aggregates due to the interplay between the long-range and short-range electronic coupling. The simulations are supported by picosecond photoionization experiments in a supersonic jet that provide a time-constant for the excimer formation of around 6–7 ps, in good agreement with theory. Finally, in order to explore how the crystal environment influences the excimer formation dynamics we perform large scale QM/MM nonadiabatic dynamics simulations on a pyrene crystal in the framework of the long-range corrected tight-binding TDDFT. In contrast to the isolated dimer, the excimer formation in the crystal follows a single reaction pathway in which the initially excited parallel slip motion is strongly damped by the interaction with the surrounding molecules leading to the slow excimer stabilization on a picosecond time scale. KW - exciton dynamics KW - pyrene dimer Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159656 UR - http://dx.doi.org/10.1039/C7CP03990E N1 - Submitted version ER - TY - THES A1 - Albert, Julian T1 - Quantum Studies on Low-Dimensional Coupled Electron-Nuclear Dynamics T1 - Quantentheoretische Untersuchungen niederdimensionaler gekoppelter Elektronen-Kern-Dynamik N2 - In the context of quantum mechanical calculations, the properties of non-adiabatic coupling in a small system, the Shin-Metiu model, is investigated. The transition from adiabatic to non-adiabatic dynamics is elucidated in modifying the electron-nuclear interaction. This allows the comparison of weakly correlated electron-nuclear motion with the case where the strong correlations determine the dynamics. The studies of the model are extended to include spectroscopical transitions being present in two-dimensional and degenerate four-wave mixing spectroscopy. Furthermore, the quantum and classical time-evolution of the coupled motion in the complete electron-nuclear phase space is compared for the two coupling cases. Additionally, the numerically exact electron flux within the weak coupling case is compared to the Born-Oppenheimer treatment. In the last part of the thesis, the model is extended to two dimensions. The system then possesses potential energy surfaces which exhibit a typical 'Mexican hat'-like structure and a conical intersection in the adiabatic representation. Thus, it is possible to map properties of the system onto a vibronic coupling (Jahn-Teller) hamiltonian. Exact wave-packet propagations as well as nuclear wave-packet dynamics in the adiabatic and diabatic representation are performed. N2 - Im Rahmen quantenmechanischer Rechnungen werden die Eigenschaften nicht-adiabatischer Kopplungen in einem kleinen Modellsystem, dem Shin-Metiu Modell, untersucht. Die Fallunterscheidung zwischen adiabatischen und nicht-adiabatischen Prozessen wird durch eine Parameterisierung der Elektronen-Kernwechselwirkung realisiert. Dies ermöglicht den Vergleich zwischen korrelierter und unkorrelierter Elektronen-Kernbewegung. Innerhalb dieser zwei Extrema werden die Eigenfunktionen betrachtet und der Einfluss nicht-adiabtischer Kopplungen auf diese analysiert. Es wird gezeigt, dass im Fall einer schwachen Kopplung die Eigenfunktionen als adiabatisches Produkt dargestellt werden können, soweit die adiabatischen elektronischen Eigenfunktionen voneinander entkoppelt sind und unterschiedlichen elektronischen Charakter besitzen. Auf der anderen Seite sind die adiabatischen elektronischen Eigenfunktionen und die Vibrationseigenfunktionen im Bereich einer starken Kopplung miteinander gekoppelt, und es zeigt sich, dass die Eigenfunktionen in der diabatischen Darstellung eine zur adiabatischen äquivalente, aber intuitivere Beschreibung darstellen. Anhand dieser Ergebnisse wird eine Diabatisierung und ein Vergleich zwischen exakter Elektronen-Kernpropagation und der Propagation im diabatischen Bild durchgeführt. Dieser Vergleich ist in sehr guter Übereinstimmung und zeigt, dass der Ansatz der Diabatisierung für unkorrelierte Elektronen-Kernbewegungen hinreichend ist und gleichzeitig klassifiziert er die Wellepacket-dynamik im Bereich starker Kopplungen als diabatisch. Die theoretischen Untersuchungen des eindimensionalen Modells werden auf spektroskopische Übergänge erweitert, welche lineare und nichtlineare System-Feld Wechselwirkungen beinhalten. Ein Vergleich zwischen zweidimensionalen Spektren bezüglich schwach und stark gekoppelter Elektronen-Kern Dynamik zeigt, dass im Fall schwacher Kopplungen, die Spektren durch analoge Rechnungen im Rahmen der Born-Oppenheimer Näherung reproduzierbar sind. Es zeigt sich, dass diejenigen Teile des Spektrums, welche auf gleiche Weise nicht reproduzierbar sind, elektronisch gemischten Zuständen, aufgrund starker nicht-adiabtischer Kopplungen, zuzuordnen sind. Die Möglichkeit, das System zwischen schwacher und starker Kopplung zu variieren, erlaubt es Vibrationskohärenzen und elektronischen Kohärenzen in zweidimensionalen Spektren zu analysieren. Dazu werden die zweidimensionalen Spektren als Funktion der Populationszeit betrachtet. Es ergibt sich, dass im Fall schwacher Kopplungen die Kohärenzen während der Populationszeit Vibrationskohärenzen zugeordnet werden können. Im Gegensatz dazu ergeben sich im Bereich starker Kopplungen, aufgrund des gemischten elektronischen Charakters der Zustände, Kohärenzen vibronischer Art. Als weitere Methode wird die Degenerierte-Vier-Wellen-Mischen Spektroskopie (FWM) untersucht. Diese ist in der Lage Grundzustandsdynamiken und Dynamiken im angeregten Zustand separat zu verfolgen. Sowohl für negative als auch für positive Verzögerungszeiten werden die zwei verschiedenen Kopplungsszenarien untersucht und der Zusammenbruch dieser Methode bezüglich der nicht möglichen Trennung der Grundzustandsdynamik und Dynamik im angeregten Zustand innerhalb der adiabatischen Beschreibung betrachtet. Als weiterer Aspekt, wird die quantenmechanische und klassische Zeitentwicklung der gekoppelten Elektronen-Kernbewegung im vollständigen Phasenraum für verschiedene Kopplungsstärken verglichen. Im Fall schwacher Kopplung stimmt im Kurzzeitverhalten die klassische Berechung mit der quantenmechanischen gut überein. Dies kann auch im Fall starker Kopplungen gezeigt werden, was die weitere Schlussfolgerung zulässt, dass die Dynamik im Bereich starker Kopplungen hauptsächlich in einem diabatischen Zustand stattfindet. Das zeigt, dass die klassische Bewegung sehr ähnlich zu der diabatischen quantenmechanischen Bewegung verläuft. Als Konsequenz reproduziert eine klassische Bewegung im vollständigen Phasenraum eine quantenmechanische, bei der nicht-adiabatische Kopplungen stark involviert sind. Als letzte Betrachtung des eindimensionalen Shin-Metiu Modells, wird der Elektronenfluss im schwach gekoppelten Fall untersucht und der numerisch exakt berechnete Fluss mit dem in der Born-Oppenheimer Näherung verglichen. Innerhalb der üblichen Definition verschwindet der Elektronenfluss im Rahmen der Born-Oppenheimer Näherung. Durch die Verwendung der Kontinuitätsgleichung für den Elektronenfluss ergibt sich jedoch ein nicht-verschwindender Elektronenfluss. Weiter wurde ein Reflektionsprinzip hergeleitet, welches den Elektronenfluss auf den Kernfluss abbildet und umgekehrt. Zum Abschluss der Untersuchungen des eindimensionalen Shin-Metiu Modells wird das System auf zwei Dimensionen erweitert. Dabei zeigt sich, dass die adiabatischen Potentialflächen des Modells eine typische 'Mexican-hat' Topologie aufweist. Daraus ergibt sich, dass es möglich ist das System auf einen vibronischen (Jahn-Teller) Hamiltonian zurückzuführen. Im Zuge dessen wird das zweidimensionale System hinsichtlich der exakten Elektronen-Kerndynamik, sowie der Dynamik in den adiabatischen und diabatischen Anschauungen betrachtet. Die durchgeführten Rechnungen zeigen, dass das Passieren eines Wellenpaketes durch eine Konische Durchschneidung als eine diabatische Dynamik klassifiziert werden kann, wobei ein effizienter adiabatischer Populations-transfer stattfindet. Dieser Prozess kann sehr gut im diabatischen Bild reproduziert werden. Des Weiteren wird eine Wellenpaketdynamik um eine Konische Durchschneidung herum betrachtet und als adiabatische Dynamik klassifiziert. Der interessante Aspekt der geometrischen Phase, die mit dem Umrunden einer Konischen Durchschneidung assoziiert ist, wird mit der Rotation der elektronischen Wellenfunktion verknüpft. Zusätzlich wird hier das Auftreten der geometrische Phase in Autokorrelationsfunktionen und den daraus abgeleiteten Spektren charakterisiert. Die geometrische Phase wird zusätzlich als Mischungswinkel der Transformation zwischen dem diabatischen und adiabatischen Bild explizit berechnet. Zusammenfassend zeigen die Rechnugen an den verwendeten Modellsystemen viele fundamentale Aspekte der korrelierten Elektronen-Kerndynamik, obwohl sie auf lediglich zwei Partikel begrenzt sind. KW - Theoretische Chemie KW - Quantentheorie KW - Shin-Metiu Model KW - Coupled Electron-Nuclear Dynamics KW - Conical Intersection KW - Geometric Phase KW - Two-dimensional Spectroscopy KW - Electron Flux KW - Theoretical Chemistry Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-161512 ER - TY - JOUR A1 - Knorr, Johannes A1 - Sokkar, Pandian A1 - Schott, Sebastian A1 - Costa, Paolo A1 - Thiel, Walter A1 - Sander, Wolfram A1 - Sanchez-Garcia, Elsa A1 - Nuernberger, Patrick T1 - Competitive solvent-molecule interactions govern primary processes of diphenylcarbene in solvent mixtures JF - Nature Communications N2 - Photochemical reactions in solution often proceed via competing reaction pathways comprising intermediates that capture a solvent molecule. A disclosure of the underlying reaction mechanisms is challenging due to the rapid nature of these processes and the intricate identification of how many solvent molecules are involved. Here combining broadband femtosecond transient absorption and quantum mechanics/molecular mechanics simulations, we show for one of the most reactive species, diphenylcarbene, that the decision-maker is not the nearest solvent molecule but its neighbour. The hydrogen bonding dynamics determine which reaction channels are accessible in binary solvent mixtures at room temperature. In-depth analysis of the amount of nascent intermediates corroborates the importance of a hydrogen-bonded complex with a protic solvent molecule, in striking analogy to complexes found at cryogenic temperatures. Our results show that adjacent solvent molecules take the role of key abettors rather than bystanders for the fate of the reactive intermediate. KW - Reaction kinetics and dynamics KW - Photochemistry Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-165954 VL - 7 ER - TY - THES A1 - Auerhammer, Nina A. T1 - Energy Transfer and Excitonic Interactions in Conjugated Chromophore Arrangements of Bodipys and Pyrenes and Squaraines T1 - Energie Transfer und Exzitonische Wechselwirkungen in Konjugierten Chromophor Anordnungen von Bodipys und Pyrenen und Squarainen N2 - In this work the energy transfer and excitonic coupling in different chromophore arrangements were investigated. A difference in the coupling strength was introduced by varring the connecting unit and the spacial orientation relative to each other. The synthesis of the 2,7-substituted pyrene compounds could be optimised and good yields of HAB 1 and HAB 2 and small amounts of HAB 2 could be achieved by cobalt-catalysed trimerisation or Diels Alder reaction in the end. Absorption and fluorescence spectra reveal strong intramolecular interactions between the pyrene molecules in the HAB 1. Excitation spectra recorded at the high and low energy fluorescence suggest the contribution of two components to the spectra. One being similar to the ground state aggregate and a second species similar to undisturbed pyrene. All these feature can be accounted to two different fluorescent states which are due to electronical decoupling in the excited state. Due to the strong intramolecular coupling already in the ground state of the molecule, no energy transfer could be studied, as the six pyrene units cannot be seen as separate spectroscopic entities between which energy could be transferred. In the second part of this thesis dye conjugates of different size and alignment were synthesised to study the interaction of the transition-dipole moments. Therefore a systematic investigation of Sonogashira conditions was performed in order to obtain good yields of the desired compounds and keep dehalogenation at a minimum level. Nevertheless only the symmetrical triads could be purified as the asymmeric triads and pentades proved to decompose during purification. The pyrene containing triads Py2B and Py2SQB show small interactions already in the ground state represented by red shifts of the spectra and a broadening of the bands. Nevertheless, these interactions are in the weak coupling regime and energy transfer between the constituents is possible. On the contrary in the TA spectra it is obvious that always the whole triad, at least to some extend is excited. To question if the excitation of the high energy state is deactivated by energy transfer or rather IC in a superchromophore could not be distinguished in the course of this work. At present additional time-dependent calculations of the dynamics are in progress to get a deeper understanding of the photophysical processes taking place in the triads. The dye conjugates B2SQB-3 and (SQB)2B-4 can be assigned to the strong interaction range and hence are describable by exciton theory. The transition-dipole moments proved to be more than additive and increase for both compounds from absorption to fluorescence. This can be explained by an enhancement of the coupling in the relaxed excited state compared to the absorption into the Franck-Condon state due to a more steep potential energy surface in the excited state and hence smaller fluctuations. In the last part of this thesis the influence of disrupting electronical communication by implementing a rigid non-conjugated bridge in a bichromophoric trans-squaraine system was tested. While the flexible linked squaraines show complex spectra due to different conformers the SQA2Anth compound is rigified and no rotation is possible. This change in flexibility is represented in the steady-state spectra where just one main absorption and fluorescence band is present due to a single allowed excitonic state. The system proves to own an excited state that is completely delocalised over the whole molecule. N2 - Diese Arbeit beschäftigt sich mit der Untersuchung von Energietransfer und Exzitonenkopplung in Farbstoffen. Durch Variation der Verbrückungseinheit und der räumlichen Orientierung der Chromophore relativ zueinander konnte die Kopplungsstärke beeinflußt werden. Die Synthese von 2,7-substituierten Pyrenverbindungen konnte optimiert werden und schließlich gelang es mittels kobalt-katalisierten Trimerisierung oder Diels Alder Reaktionen gute Ausbeuten von HAB 1 und HAB 2 sowie geringere Mengen an HAB 3 zu isolieren. Absorption- und Fluoreszenzspektren deuten auf starke Wechselwirkungen unter den Chromophoren hin, die bereits im Grundzustand deutlich werden. Anregungsspektren bei verschiedenen Wellenzahlen zeigen, dass zwei verschiedene Spezies, wovon eine den Aggregaten die im Grundzustand vorhanden sind ähneln, zu den beobachteten spektralen Eigenschaften beitragen und ein weiteres größere Ähnlichkeit mit dem Pyrenmonomer aufweist. Betrachtet man all diese Eigenschaften im Gesamten kann man schlußfolgern, dass zwei fluoreszierende Zustände für die Desaktivierung verantwortlich sind, was sich auf elektronische Entkopplung im angeregten Zustand zurückführen lässt. Aufgrund der starken elektronischen Kopplung im Grundzustand und die Ausbildung von intramolekularen Aggregaten war es nicht möglich Energietransfer an diesem System zu studieren, da die sechs Pyreneinheiten nicht getrennt betrachtet werden können. Im zweiten Teil dieser Arbeit wurden Farbstoffkonjugate verschiedener Größe und Anordnung synthetisiert um die Wechselwirkung der Übergangsdipolmomente zu studieren. Dazu wurde ein systematsiches Reaktionscreening der Sonogashira-Kupplung durchgeführt, um Bedingungen zu finden, unter denen sich Dehalogenierung in Grenzen hält, jedoch gute Ausbeuten der gewünschten Endprodukte erzielt werden können. Trotzdem konnten nur die symmetrischen Trimere erfolgreich isoliert, da sich herausstellte, dass sowohl die unsymmetrischen Trimere als auch die Pentamere zu instabil für eine vollständige Aufreinigung sind. Die pyren-beinhaltenden Triaden Py2B und Py2SQB zeigen geringfügige Wechselwirkungen im Grundzustand, die sich durch eine Rotverschiebung und Verbreiterung der Absorptionsbanden zeigen. Allerding lässt sich diese Kopplung dem sehr schwachen Wechselwirkungsbereich zuordnen, sodass Energietransfer zwischen den Chromophoren möglich ist. Im Gegensatz dazu zeigt sich im TA Spektrum, dass gleichzeitig mehrere Teile der Triade angeregt sind und dass die Anregung nicht auf ein Chromophor lokalisiert ist. Die Frage, ob die Desaktivierung des angeregten Zustands durch Energietransfer oder interne Konversion in einem Superchromophor stattfindet, konnte im Zuge dieser Arbeit nicht geklärt werden. Aktuell sind zusätzliche Rechnungen (DFT) in Arbeit um ein besseres Verständnis von den ablaufenden, photophysikalischen Prozessen zu bekommen. Die Farbstoffkonjugate B2SQB-3 und (SQB)2B-4 lassen sich dem Bereich der starken Kopplung zuordnen und können daher mit der Exzitonentheorie beschrieben werden. Die Übergangsdipolmomente zeigen ein Verhalten, dass mehr als additiv ist und nehmen von der Absorption zur Fluoreszenz zu. Das lässt sich durch eine Verstärkung der Kopplung im relaxierten angeregten Zustand in Vergleich zur Absorption in den Franck-Condon Zustand erklären. Der Grund für dieses Phänomen ist eine deutlich schmalere, steilere Energiepotentialfläche im angeregten Zustand. Im letzten Teil dieser Arbeit wurde die elektronische Kommunikation in einem trans-Squaraindimer durch Einfügen einer nicht-konjugierten Brücke untersucht. Während die flexiblen Dimere komplexe Spektren aufgrund unterschiedlicher Konformere aufweisen, enthält SQA2Anth eine starre Brücke, die Rotationen verhindert. Diese Änderung der Flexibilität zeigt sich in den stationären Spektren durch eine Hauptabsorptions- und Fluoreszenzbande, da nur ein exzitonischer Zustand erlaubt ist. Das System weißt einen angeregten Zustand auf, der über das gesamte Molekül delokalisiert ist. KW - Chromophor KW - Energieaufnahme KW - Exziton KW - Pyrenderivate KW - Sonogashira-Hagihara-Reaktion KW - Bodipy KW - Hexaarylbenzene KW - Squaraine KW - Energy Transfer KW - Excitons KW - Pyrene KW - Sonogashira Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-166721 ER - TY - THES A1 - Röder, Anja M. T1 - Excited-State Dynamics in Open-Shell Molecules T1 - Dynamik angeregter Zustände von offenschaligen Molekülen N2 - In this thesis the excited-state dynamics of radicals and biradicals were characterized with femtosecond pump-probe spectroscopy. These open-shell molecules play important roles as combustion intermediates, in the formation of soot and polycyclic aromatic hydrocarbons, in atmospheric chemistry and in the formation of complex molecules in the interstellar medium and galactic clouds. In these processes molecules frequently occur in some excited state, excited either by thermal energy or radiation. Knowledge of the reactivity and dynamics of these excited states completes our understanding of these complex processes. These highly reactive molecules were produced via pyrolysis from suitable precursors and examined in a molecular beam under collision-free conditions. A first laser now excites the molecule, and a second laser ionizes it. Time-of-flight mass spectrometry allowed a first identification of the molecule, photoelectron spectroscopy a complete characterization of the molecule - under the condition that the mass spectrum was dominated by only one mass. The photoelectron spectrum was obtained via velocity-map imaging, providing an insight in the electronic states involved. Ion velocity map imaging allowed separation of signal from direct ionization of the radical in the molecular beam and dissociative photoionization of the precursor. During this thesis a modified pBasex algorithm was developed and implemented in python, providing an image inversion tool without interpolation of data points. Especially for noisy photoelectron images this new algorithm delivers better results. Some highlighted results: • The 2-methylallyl radical was excited in the ππ*-state with different internal energies using three different pump wavelengths (240.6 , 238.0 and 236.0 nm). Ionized with 800 nm multi-photon probe, the photoelectron spectra shows a s-Rydberg fingerprint spectrum, a highly positive photoelectron anisotropy of 1.5 and a bi-exponential decay ( τ1= 141\pm43 fs, τ2= 4.0\pm0.2 ps for 240.6 nm pump), where the second time-constant shortens for lower wavelengths. Field-induced surface hopping dynamics calculations confirm that the initially excited ππ*-state relaxes very fast to an s-Rydberg state (first experimentally observed time-constant), and then more slowly to the first excited state/ground state (second time-constant). With higher excitation energies the conical intersection between the s-Rydberg-state and the first excited state is reached faster, resulting in shorter life-times. • The benzyl radical was excited yith 265 nm and probed with two wavelengths, 798 nm and 398 nm. Probed with 798 nm it shows a bi-exponential decay (\tau_{1}=84\pm5 fs, \tau_{2}=1.55\pm0.12 ps), whereas with 398 nm probe only the first time-constant is observed (\tau_{1}=89\pm5 fs). The photoelectron spectra with 798 nm probe is comparable to the spectrum with 398 nm probe during the first 60 fs, at longer times an additional band appears. This band is due to a [1+3']-process, whereas with 398 nm only signal from a [1+1']-process can be observed. Non-adiabatic dynamic on the fly calculations show that the initially excited, nearly degenerate ππ/p-Rydberg-states relax very fast (first time-constant) to an s-Rydberg state. This s-Rydberg state can no longer be ionized with 398 nm, but with 798 nm ionization via intermediate resonances is still possible. The s-Rydberg state then decays to the first excited state (second time-constant), which is long-lived. • Para-xylylene, excited with 266 nm into the S2-state and probed with 800 nm, shows a bi-exponential decay (\tau_{1}=38\pm7 fs, \tau_{2}=407\pm9 fs). The initially excited S2-state decays quickly to S1-state, which shows dissociative photoionization. The population of the S1-state is directly visible in the masses of the dissociative photoionization products, benzene and the para-xylylene -H. • Ortho-benzyne, produced via pyrolysis from benzocyclobutendione, was excited with 266 nm in the S2 state and probed with 800 nm. In its time-resolved mass spectra the dynamic of the ortho-benzyne signal was superposed with the dynamics from dissociative photoionization of the precursor and of the ortho-benzyne-dimer. With time-resolved ion imaging gated on the ortho-benzyne these processes could be seperated, showing that the S2-state of ortho-benzyne relaxes within 50 fs to the S1-state. N2 - In der vorliegenden Dissertation wurde die Dynamik angeregter Zustände von Radikalen und Biradikalen mittels femtosekunden-zeitaufgelöster Anrege-Abfragespektroskopie untersucht. Radikale und Biradikale sind nicht nur wichtige Zwischenprodukte in Verbrennungsprozessen, sondern auch bei der Bildung von Ruß und polyzyklischen aromatischen Kohlenwasserstoffen beteiligt. Des Weiteren spielen sie eine wichtige Rolle in der Atmosphärenchemie und bei der Bildung komplexer Moleküle im interstellaren Medium. Von entscheidender Bedeutung ist in den genannten Prozessen die Anregung der Radikalen und Biradikale in energetisch höhere Zustände, dies geschieht entweder durch thermische Energie oder mittels Strahlung. Für das Verständnis der ablaufenden Vorgänge ist es zwingend erforderlich die Dynamik der angeregten Zu\-stände zu verstehen. Die Radikale und Biradikale wurden dafür mittels Pyrolyse eines geeigneten Vorläufers erzeugt, und anschließend unter kollisionsfreien Bedingungen im Molekularstrahl spektroskopisch untersucht. Hierbei regt ein erster Laser das Molekül an, ein zweiter Laser ionisiert es. Mittels Flugzeitmassenspektrometrie wurden die Moleküle identifiziert, und mittels Photoelektronenspektroskopie weiter charackterisiert - unter der Bedingung, dass im Massenspektrum eine Masse dominiert. Das Photoelektronenspektrum wurde mittels Velocity-Map Imaging aufgenommen und gibt einen Einblick in den elektronischen Zustand im Augenblick der Ionisations. Die Velocity-Map Imaging-Technik von Ionen erlaubt außerdem die Unterscheidung von Ionen aus direkter Ionisation und dissoziativer Photoionisation. In diesem Rahmen wurde auch ein modifizierter pBasex-Algorithmus entwickelt und in Python implementiert. Dieser kommt im Gegensatz zum herkömmlichen pBasex-Algorithmus komplett ohne Interpolation der Datenpunkte aus. Besonders bei verrauschten Photoelektronenspektren liefert dieser Algorithmus bessere Ergebnisse. Einige Resultate sollten besonders hervorgehoben werden: • Das 2-Methylallylradikal wurde in einen ππ*-Zustand mit drei verschiedenen Anregungswellenängen (240.6, 238.0 und 236.0 nm) angeregt, um eine Variation der inneren Energie innerhalb dieses Zustandes zu ermöglichen. Es wurde mit bis zu drei 800-nm-Photonen ionisiert. Das Photoelektronenspektrum zeigt ein s-Rydberg-photo\-elektronenspektrum, eine positive Photoelektronenanisotropie von 1.5 sowie einen biexponentiellen Zerfall (τ1= 141\pm43 fs, τ2= 4.0\pm0.2 ps für 240.6 nm als Anregelaser). Die zweite Zeitkonstante verkürzt sich mit kürzeren Wellenlängen. Field-induced surface hopping Dynamikrechungen bestätigen, dass der ursprünglich angeregte ππ*-Zustand schnell in einen s-Rydbergzustand relaxiert (erste Zeitkonstante), um dann anschließend langsamer in den ersten angeregten Zustand zu relaxieren (zweite Zeitkonstante). Mit einer höheren inneren Energie wird die konische Durchschneidung zwischen dem s-Rydbergzustand und dem ersten angeregten Zustand schneller erreicht, somit verkürzt sich die zweite Zeitkonstante bei kürzeren Wellenlängen. • Das Benzylradikal zeigt in einem 265 nm Anrege-/798 nm Abfrageexperiment einen biexponentiellen Zerfall (\tau_{1}=84\pm5 fs, \tau_{2}=1.55\pm0.12 ps), wohingegen mit 398 nm lediglich ein monoexponentieller Zerfall sichtbar ist (\tau_{1}=89\pm5 fs). Das 798 nm Abfrage-Photoelektronenspektrum ist in den ersten 60 fs ähnlich dem 398 nm Abfrage-Photoelektronenspektrum, bei späteren Zeiten erscheint eine weitere Bande bei höheren kinetischen Energien der Elektronen. Diese Bande stammt aus einem [1+3']-Prozess, während bei 398 nm nur Signal aus einem [1+1']-Prozess beobachtbar ist. Laut nichtadiabatische Dynamikrechungen relaxiert der ursprünglich angeregte ππ-Zustand bzw. der fast energiegleiche p-Rydbergzustand sehr schnell in einen s-Ryd\-berg\-zu\-stand (erste Zeitkonstante), welcher mit 798 nm über intermediäre Resonanzen noch ionisiert werden kann, aber nicht mehr mit 398 nm. Anschließend relaxiert der s-Ryd\-berg\-zu\-stand in den ersten angeregten, langlebigen Zustand (zweite Zeitkonstante). • Para-Xylylen wurde mit 266 nm in den S2-Zustand angeregt und mit 800 nm in einem Multiphotonenprozess ionisiert. Es zeigt einen biexponentialen Zerfall (\tau_{1}=38\pm7 fs, \tau_{2}=407\pm9 fs). Der ursprünglich angeregte S2-Zustand relaxiert schnell in den S1-Zustand, welcher im Ion dissoziert. Somit lässt sich die Besetzung des S1-Zustands direkt an den Signalen der Dissoziationsprodukte Benzol und dem Wasserstoffabstraktionsprodukt von para-Xylylen verfolgen. • Ortho-Benzin wurde via Pyrolyse des Vorläufers Benzocyclobuten-1,2,-dion hergestellt, mit 266 nm in den S2-Zustand angeregt und mit 800 nm ionisiert. In den zeitaufgelösten Massenspektren wird die Dynamik des ortho-Benzinsignals durch die dissoziative Photoionisationdynamik des Vorläufers und des ortho-Benzindimers überlagert. Mittels zeitaufgelöste Ionenspektren vom ortho-Benzin konnten diese Prozesse voneinander getrennt werden, und es konnte gezeigt werden, dass der S2-Zustand von ortho-Benzin innerhalb von 50 fs in den S1-Zustand relaxiert. N2 - Dans cette thèse, la dynamique des états excités des radicaux et biradicaux a été examinée en utilisant la spectroscopie pompe-sonde résolue en temps à l'échelle femto-seconde. Les molécules à couche ouverte jouent un rôle primordial comme intermédiaires dans les processus de combustion, dans la formation de la suie et des hydrocarbures aromatiques polycycliques, dans la chimie atmosphérique ou dans la formation des molécules organiques complexes du milieu interstellaire et des nuages galactiques. Dans tous ces processus les molécules sont souvent excitées, soit par échauffement thermique, soit par irradiation. En conséquence la réactivité et la dynamique de ces états excités sont particulièrement intéressantes afin d'obtenir une compréhension globale de ces processus. Dans ce travail les radicaux et biradicaux ont été produits par pyrolyse à partir de molécules précurseur adaptées et ont été examinés dans un jet moléculaire en absence de collisions. Les radicaux sont ensuite portés dans un état excité bien défini, et ionisés avec un deuxième laser. La spectrométrie de masse à temps de vol permet une première identification de la molécule. Via des spectres de photoélectrons la molécule est characterisée, pourvu que le spectre de masse ne montre majoritairement qu'une seule masse. Les spectres de photoélectrons ont été obtenus par l'imagerie de vitesse, permettant d'obtenir des informations sur l'état électronique du radical au moment de l'ionisation. L'imaginerie de vitesse des ions permet de distinguer les ions issus d'une ionisation directe et ceux issus d'une ionisation dissociative. Pendant cette thèse un algorithme modifié de pBasex a été développé et implémenté en langage python: cet algorithme inverse des images sans interpolation des points expérimentaux, il montre une meilleure performance pour le traitement des images bruités. Pour des images bruitées cet algorithme montre une meilleure performance. Quelques résultats sélectionnés: • Le radical de 2-méthylallyle a été excité dans l'état ππ* avec différentes énergies internes en utilisant trois différentes longueurs d'onde de pompe (240.6, 238.0 et 236.0 nm). Après ionisation par un laser 800 nm selon un processus multi-photonique, le spectre de photoélectrons montre le charactéristiques d'un état de Rydberg, une anisotropie des photoélectrons proche de 2 et un déclin biexponentiel (τ1= 141\pm43 fs, τ2= 4.0\pm0.2 ps avec 240.6 nm comme pompe). La deuxième constante de temps se réduit si la longueur d'onde de la pompe diminue. Des calculs de dynamique de saut de surface induite par champ confirment que l'état ππ* initialement excité relaxe très vite dans un état de Rydberg s (première constante de temps expérimentale), qui se relaxe ensuite plus lentement vers le premier état excité (deuxième constante de temps). Avec une excitation plus énergétique, cette intersection conique est atteinte plus vite, de sorte que la seconde constante de temps diminue. • Le radical de benzyle montre un déclin biexponentiel lorsqu'il est excité avec 265 nm et sondé avec 798 nm (\tau_{1}=84\pm5 fs, \tau_{2}=1.55\pm0.12 ps); si on sonde avec 398 nm un seul déclin est mesuré (\tau_{1}=89\pm5 fs). Le spectre de photoélectrons obtenu avec 798 nm comme sonde est comparable à celui avec 398 nm sonde pendant les premières 60 fs. À des temps plus longs une autre bande apparaît, issue d'un processus [1+3'], tandis qu'avec 398 nm seul le processus [1+1'] est visible. Des simulations non-adiabatique de la dynamique montrent que l'état ππ initialement excité relaxe vers un état de Rydberg s (première constante de temps). L'état de Rydberg s ne peut plus être ionisé avec un photon de 398 nm; mais 798 nm l'ionise avec 3 photons en passant par des états intermédiaires. Cet état de Rydberg s se relaxe vers le premier état excité (deuxième constante de temps). • Le para-xylylène a été excité avec 266 nm dans l'état S2. Sondé avec 800 nm, il montre un déclin biexponentiel (\tau_{1}=38\pm7 fs, \tau_{2}=407\pm9 fs). L'état S2 initialement excité se relaxe très vite dans l'état S1, qui se dissocie une fois ionisé. La population de l'état S1 peut donc être directement suivie par l'évolution de ses produits de dissociation, le benzène et le produit d'abstraction d'un hydrogène. • Ortho-benzyne, produit via pyrolyse de benzocyclobutendione, a été excité dans l'état S2 avec 266 nm et ionisé avec 800 nm. Dans les spectres de masse résolus en temps, la dynamique de l'ortho-benzyne a été altérée par la dynamique de photoionisation dissociative du precurseur et du dimère de l'ortho-benzyne. Ces deux processus ont pu néanmoins être différienciés par l'imagerie d'ion d'ortho-benzyne, montrant que l'état S2 d'ortho-benzyne se relaxe vers l'état S1 en 50 fs. KW - Radikal KW - Laserspektroskopie KW - Photoelektronenspektroskopie KW - Angeregter Zustand KW - Massenspektrometrie KW - time-resolved spectroscopy KW - open-shell molecules KW - femtosecond pump-probe spectroscopy Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151738 ER - TY - JOUR A1 - Lisinetskaya, Polina A1 - Braun, Christian A1 - Proch, Sebastian A1 - Kim, Young Dok A1 - Ganteför, Gerd A1 - Mitrić, Roland T1 - Excited state nonadiabatic dynamics of bare and hydrated anionic gold clusters Au\(^−_3\)[H\(_2\)O]\(_n\) (n=0-2) JF - Physical Chemistry Chemical Physics N2 - We present a joint theoretical and experimental study of excited state dynamics in pure and hydrated anionic gold clusters Au\(^-_3\)[H\(_2\)O]\(_n\) (n = 0-2). We employ mixed quantum-classical dynamics combined with femtosecond time-resolved photoelectron spectroscopy in order to investigate the influence of hydration on excited state lifetimes and photo-dissociation dynamics. A gradual decrease of the excited state lifetime with the number of adsorbed water molecules as well as gold cluster fragmentation quenching by two or more water molecules are observed both in experiment and in simulations. Non-radiative relaxation and dissociation in excited states are found to be responsible for the excited state population depletion. Time constants of these two processes strongly depend on the number of water molecules leading to the possibility to modulate excited state dynamics and fragmentation of the anionic cluster by adsorption of water molecules. KW - nonadiabatic dynamics KW - metal cluster KW - time-resolved photoelectron spectroscopy Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159176 UR - https://doi.org/10.1039/C5CP04297F SN - 1463-9076 N1 - Accepted version VL - 18 IS - 9 ER - TY - JOUR A1 - Lisinetskaya, Polina A1 - Röhr, Merle I. S. A1 - Mitrić, Roland T1 - First-principles simulation of light propagation and exciton dynamics in metal cluster nanostructures JF - Applied Physics B N2 - We present a theoretical approach for the simulation of the electric field and exciton propagation in ordered arrays constructed of molecular-sized noble metal clusters bound to organic polymer templates. In order to describe the electronic coupling between individual constituents of the nanostructure we use the ab initio parameterized transition charge method which is more accurate than the usual dipole-dipole coupling. The electronic population dynamics in the nanostructure under an external laser pulse excitation is simulated by numerical integration of the time-dependent Schrodinger equation employing the fully coupled Hamiltonian. The solution of the TDSE gives rise to time-dependent partial point charges for each subunit of the nanostructure, and the spatio-temporal electric field distribution is evaluated by means of classical electrodynamics methods. The time-dependent partial charges are determined based on the stationary partial and transition charges obtained in the framework of the TDDFT. In order to treat large plasmonic nanostructures constructed of many constituents, the approximate self-consistent iterative approach presented in (Lisinetskaya and Mitric in Phys Rev B 89:035433, 2014) is modified to include the transition-charge-based interaction. The developed methods are used to study the optical response and exciton dynamics of Ag-3(+) and porphyrin-Ag-4 dimers. Subsequently, the spatio-temporal electric field distribution in a ring constructed of ten porphyrin-Ag-4 subunits under the action of circularly polarized laser pulse is simulated. The presented methodology provides a theoretical basis for the investigation of coupled light-exciton propagation in nanoarchitectures built from molecular size metal nanoclusters in which quantum confinement effects are important. KW - metal-cluster hybrid systems KW - exciton transfer KW - optical response KW - transition density KW - total electric field KW - electric field distribution KW - transition dipole moment KW - transition charge Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159193 UR - https://doi.org/10.1007/s00340-016-6436-6 SN - 0946-2171 N1 - This is a post-peer-review, pre-copyedit version of an article published in Apllied Physcis B. The final authenticated version is available online at: http://dx.doi.org/10.1007/s00340-016-6436-6 VL - 122 IS - 6 ER - TY - JOUR A1 - Wohlgemuth, Matthias A1 - Mitric, Roland T1 - Photochemical Chiral Symmetry Breaking in Alanine JF - Journal of Physical Chemistry A N2 - We introduce a general theoretical approach for the simulation of photochemical dynamics under the influence of circularly polarized light to explore the possibility of generating enantiomeric enrichment through polarized-light-selective photochemistry. The method is applied to the simulation of the photolysis of alanine, a prototype chiral amino acid. We show that a systematic enantiomeric enrichment can be obtained depending on the helicity of the circularly polarized light that induces the excited-state photochemistry of alanine. By analyzing the patterns of the photoinduced fragmentation of alanine we find an inducible enantiomeric enrichment up to 1.7%, which is also in good correspondence to the experimental findings. Our method is generally applicable to complex systems and might serve to systematically explore the photochemical origin of homochirality. KW - circularly-polarized light KW - amino-acids KW - homochirality KW - molecular dynamics KW - dichroism Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-158557 UR - https://pubs.acs.org/doi/10.1021/acs.jpca.6b07611 N1 - This document is the Accepted Manuscript version of a Published Work that appeared in final form in Journal of Physical Chemistry A, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acs.jpca.6b07611 VL - 45 IS - 120 ER - TY - INPR A1 - Petersen, Jens A1 - Lindner, Joachim O. A1 - Mitric, Roland T1 - Ultrafast Photodynamics of Glucose T2 - Journal of Physical Chemistry B N2 - We have investigated the photodynamics of \(\beta\)-D-glucose employing our field-induced surface hopping method (FISH), which allows us to simulate the coupled electron-nuclear dynamics, including explicitly nonadiabatic effects and light-induced excitation. Our results reveal that from the initially populated S\(_{1}\) and S\(_{2}\) states, glucose returns nonradiatively to the ground state within about 200 fs. This takes place mainly via conical intersections (CIs) whose geometries in most cases involve the elongation of a single O-H bond, while in some instances ring-opening due to dissociation of a C-O bond is observed. Experimentally, excitation to a distinct excited electronic state is improbable due to the presence of a dense manifold of states bearing similar oscillator strengths. Our FISH simulations explicitly including a UV laser pulse of 6.43 eV photon energy reveals that after initial excitation the population is almost equally spread over several close-lying electronic states. This is followed by a fast nonradiative decay on the time scale of 100-200 fs, with the final return to the ground state proceeding via the S\(_{1}\) state through the same types of CIs as observed in the field-free simulations. KW - photodynamics KW - nonadiabatic dynamics KW - conical intersections KW - carbohydrates Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159155 N1 - This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Journal of Physical Chemistry, copyright © American Chemical Society after peer review. To access the final edited and published work see doi:10.1021/acs.jpcb.7b08602 ER - TY - JOUR A1 - Hoche, Joscha A1 - Schmitt, Hans-Christian A1 - Humeniuk, Alexander A1 - Fischer, Ingo A1 - Mitrić, Roland A1 - Röhr, Merle I. S. T1 - The mechanism of excimer formation: an experimental and theoretical study on the pyrene dimer JF - Physical Chemistry Chemical Physics N2 - The understanding of excimer formation in organic materials is of fundamental importance, since excimers profoundly influence their functional performance in applications such as light-harvesting, photovoltaics or organic electronics. We present a joint experimental and theoretical study of the ultrafast dynamics of excimer formation in the pyrene dimer in a supersonic jet, which is the archetype of an excimer forming system. We perform simulations of the nonadiabatic photodynamics in the frame of TDDFT that reveal two distinct excimer formation pathways in the gas-phase dimer. The first pathway involves local excited state relaxation close to the initial Franck–Condon geometry that is characterized by a strong excitation of the stacking coordinate exhibiting damped oscillations with a period of 350 fs that persist for several picoseconds. The second excimer forming pathway involves large amplitude oscillations along the parallel shift coordinate with a period of ≈900 fs that after intramolecular vibrational energy redistribution leads to the formation of a perfectly stacked dimer. The electronic relaxation within the excitonic manifold is mediated by the presence of intermolecular conical intersections formed between fully delocalized excitonic states. Such conical intersections may generally arise in stacked π-conjugated aggregates due to the interplay between the long-range and short-range electronic coupling. The simulations are supported by picosecond photoionization experiments in a supersonic jet that provide a time-constant for the excimer formation of around 6–7 ps, in good agreement with theory. Finally, in order to explore how the crystal environment influences the excimer formation dynamics we perform large scale QM/MM nonadiabatic dynamics simulations on a pyrene crystal in the framework of the long-range corrected tight-binding TDDFT. In contrast to the isolated dimer, the excimer formation in the crystal follows a single reaction pathway in which the initially excited parallel slip motion is strongly damped by the interaction with the surrounding molecules leading to the slow excimer stabilization on a picosecond time scale. KW - exciton dynamics KW - pyrene dimer Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159514 UR - http://dx.doi.org/10.1039/C7CP03990E N1 - Accepted version VL - 19 IS - 36 ER - TY - INPR A1 - Lambert, Christoph A1 - Völker, Sebastian F. A1 - Koch, Federico A1 - Schmiedel, Alexander A1 - Holzapfel, Marco A1 - Humeniuk, Alexander A1 - Röhr, Merle I. S. A1 - Mitric, Roland A1 - Brixner, Tobias T1 - Energy Transfer Between Squaraine Polymer Sections: From helix to zig-zag and All the Way Back T2 - Journal of the American Chemical Society N2 - Joint experimental and theoretical study of the absorption spectra of squaraine polymers in solution provide evidence that two different conformations are present in solution: a helix and a zig-zag structure. This unique situation allows investigating ultrafast energy transfer processes between different structural segments within a single polymer chain in solution. The understanding of the underlying dynamics is of fundamental importance for the development of novel materials for light-harvesting and optoelectronic applications. We combine here femtosecond transient absorption spectroscopy with time-resolved 2D electronic spectroscopy showing that ultrafast energy transfer within the squaraine polymer chains proceeds from initially excited helix segments to zig-zag segments or vice versa, depending on the solvent as well as on the excitation wavenumber. These observations contrast other conjugated polymers such as MEH-PPV where much slower intrachain energy transfer was reported. The reason for the very fast energy transfer in squaraine polymers is most likely a close matching of the density of states between donor and acceptor polymer segments because of very small reorganization energy in these cyanine-like chromophores. KW - energy transfer dynamics KW - squaraine polymer Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159607 UR - http://dx.doi.org/10.1021/jacs.5b03644 N1 - This document is the unedited Author's version of a Submitted Work that war subsequently accepted for publication in Journal of the American Chemical Society, copyright American Chemical Society after peer review. To access the final edited and published work see doi:10.1021/jacs.5b03644. ER - TY - JOUR A1 - Röhr, Merle I. S. A1 - Lisinetskaya, Polina G. A1 - Mitric, Roland T1 - Excitonic Properties of Ordered Metal Nanocluster Arrays: 2D Silver Clusters at Multiporphyrin Templates JF - Journal of Physical Chemistry A N2 - The design of ordered arrays of metal nanoclusters such as for example 2D cluster organic frameworks might open a new route towards the development of materials with tailored optical properties. Such systems could serve as plasmonically enhanced light-harvesting materials, sensors or catalysts. We present here a theoretical approach for the simulation of the optical properties of ordered arrays of metal clusters that is based on the ab initio parametrized Frenkel exciton model. We demonstrate that small atomically precise silver clusters can be assembled in one- and two-dimensional arrays on suitably designed porphyrin templates exhibiting remarkable optical properties. By employing explicit TDDFT calculations on smaller homologs, we show that the intrinsic optical properties of metal clusters are largely preserved but undergo J- and H-type excitonic coupling that results in controllable splitting of their excited states. Furthermore, ab initio parameterized Frenkel exciton model calculations allow us to predict an energetic splitting of up to 0.77 eV in extended two-dimensional square arrays and 0.79 eV in tilted square aggregates containing up to 25 cluster-porphyrin subunits. KW - Excitons KW - Porphyrin arrays Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159464 UR - https://pubs.acs.org/doi/10.1021/acs.jpca.6b04243 N1 - Accepted version VL - 120 IS - 26 ER - TY - INPR A1 - Röder, Anja A1 - Humeniuk, Alexander A1 - Giegerich, Jens A1 - Fischer, Ingo A1 - Poisson, Lionel A1 - Mitric, Roland T1 - Femtosecond Time-Resolved Photoelectron Spectroscopy of the Benzyl Radical T2 - Physical Chemistry Chemical Physics N2 - We present a joint experimental and computational study of the nonradiative deactivation of the benzyl radical, C\(_7\)H\(_7\) after UV excitation. Femtosecond time-resolved photoelectron imaging was applied to investigate the photodynamics of the radical. The experiments were accompanied by excited state dynamics simulations using surface hopping. Benzyl has been excited at 265 nm into the D-band (\(\pi\pi^*\)) and the dynamics was probed using probe wavelengths of 398 nm or 798 nm. With 398 nm probe a single time constant of around 70-80 fs was observed. When the dynamics was probed at 798 nm, a second time constant \(\tau_2\)=1.5 ps was visible. It is assigned to further non-radiative deactivation to the lower-lying D\(_1\)/D\(_2\) states. KW - Nonadiabatic dynamics KW - time-resolved photoelectron spectroscopy KW - benzyl radical Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159474 UR - http://dx.doi.org/10.1039/C7CP01437F N1 - Submitted version ER - TY - INPR A1 - Wohlgemuth, Matthias A1 - Miyazaki, Mitsuhiko A1 - Tsukada, Kohei A1 - Weiler, Martin A1 - Dopfer, Otto A1 - Fujii, Masaaki A1 - Mitrić, Roland T1 - Deciphering environment effects in peptide bond solvation dynamics by experiment and theory T2 - Physical Chemistry Chemical Physics N2 - Most proteins work in aqueous solution and the interaction with water strongly affects their structure and function. However, experimentally the motion of a specific single water molecule is difficult to trace by conventional methods, because they average over the heterogeneous solvation structure of bulk water surrounding the protein. Here, we provide a detailed atomistic picture of the water rearrangement dynamics around the –CONH– peptide linkage in the two model systems formanilide and acetanilide, which simply differ by the presence of a methyl group at the peptide linkage. The combination of picosecond pump–probe time-resolved infrared spectroscopy and molecular dynamics simulations demonstrates that the solvation dynamics at the molecular level is strongly influenced by this small structural difference. The effective timescales for solvent migration triggered by ionization are mainly controlled by the efficiency of the kinetic energy redistribution rather than the shape of the potential energy surface. This approach provides a fundamental understanding of protein hydration and may help to design functional molecules in solution with tailored properties. KW - hydration dynamics KW - trans-formanilide KW - water migration KW - protein hydration KW - infrared-spectra Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159483 UR - http://pubs.rsc.org/en/content/articlelanding/2017/cp/c7cp03992a N1 - Submitted version ER - TY - JOUR A1 - Ramler, Jacqueline A1 - Poater, Jordi A1 - Hirsch, Florian A1 - Ritschel, Benedikt A1 - Fischer, Ingo A1 - Bickelhaupt, F. Matthias A1 - Lichtenberg, Crispin T1 - Carbon monoxide insertion at a heavy p-block element: unprecedented formation of a cationic bismuth carbamoyl JF - Chemical Science N2 - Major advances in the chemistry of 5th and 6th row heavy p-block element compounds have recently uncovered intriguing reactivity patterns towards small molecules such as H\(_2\), CO\(_2\), and ethylene. However, well-defined, homogeneous insertion reactions with carbon monoxide, one of the benchmark substrates in this field, have not been reported to date. We demonstrate here, that a cationic bismuth amide undergoes facile insertion of CO into the Bi–N bond under mild conditions. This approach grants direct access to the first cationic bismuth carbamoyl species. Its characterization by NMR, IR, and UV/vis spectroscopy, elemental analysis, single-crystal X-ray analysis, cyclic voltammetry, and DFT calculations revealed intriguing properties, such as a reversible electron transfer at the bismuth center and an absorption feature at 353 nm ascribed to a transition involving σ- and π-type orbitals of the bismuth-carbamoyl functionality. A combined experimental and theoretical approach provided insight into the mechanism of CO insertion. The substrate scope could be extended to isonitriles. KW - carbon monoxide KW - p-block element Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-181627 VL - 10 ER - TY - INPR A1 - Huber, Bernhard A1 - Pres, Sebastian A1 - Wittmann, Emanuel A1 - Dietrich, Lysanne A1 - Lüttig, Julian A1 - Fersch, Daniel A1 - Krauss, Enno A1 - Friedrich, Daniel A1 - Kern, Johannes A1 - Lisinetskii, Victor A1 - Hensen, Matthias A1 - Hecht, Bert A1 - Bratschitsch, Rudolf A1 - Riedle, Eberhard A1 - Brixner, Tobias T1 - Space- and time-resolved UV-to-NIR surface spectroscopy and 2D nanoscopy at 1 MHz repetition rate N2 - We describe a setup for time-resolved photoemission electron microscopy (TRPEEM) with aberration correction enabling 3 nm spatial resolution and sub-20 fs temporal resolution. The latter is realized by our development of a widely tunable (215–970 nm) noncollinear optical parametric amplifier (NOPA) at 1 MHz repetition rate. We discuss several exemplary applications. Efficient photoemission from plasmonic Au nanoresonators is investigated with phase-coherent pulse pairs from an actively stabilized interferometer. More complex excitation fields are created with a liquid-crystal-based pulse shaper enabling amplitude and phase shaping of NOPA pulses with spectral components from 600 to 800 nm. With this system we demonstrate spectroscopy within a single plasmonic nanoslit resonator by spectral amplitude shaping and investigate the local field dynamics with coherent two-dimensional (2D) spectroscopy at the nanometer length scale (“2D nanoscopy”). We show that the local response varies across a distance as small as 33 nm in our sample. Further, we report two-color pump–probe experiments using two independent NOPA beamlines. We extract local variations of the excited-state dynamics of a monolayered 2D material (WSe2) that we correlate with low-energy electron microscopy (LEEM) and reflectivity (LEER) measurements. Finally, we demonstrate the in-situ sample preparation capabilities for organic thin films and their characterization via spatially resolved electron diffraction and dark-field LEEM. KW - Photoemission electron microscopy PEEM KW - Low energy electron microscopy LEEM KW - Spatially resolved 2D spectroscopy KW - Two-color pump-probe spectroscopy KW - Time-resolved photoemission electron microscopy Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-191906 SN - 0034-6748 N1 - This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Review of Scientific Instruments 90, 113103 (2019); https://doi.org/10.1063/1.5115322 and may be found at https://doi.org/10.1063/1.5115322. ER - TY - THES A1 - Lindner, Joachim Oliver T1 - Multistate Metadynamics with Electronic Collective Variables T1 - Mehrzustandsmetadynamik mit Elektronischen Kollektiven Variablen N2 - The aim of this thesis was to develop new automatic enhanced sampling methods by extending the idea of Parrinello’s metadynamics to multistate problems and by introducing new quantum-mechanical electronic collective variables. These methods open up a rich perspective for applications to the photophysical processes in complex molecular systems, which play a major role in many natural processes such as vision and photosynthesis, but also in the development of new materials for organic electronics, whose function depends on specific electronic properties such as biradicalicity. N2 - Das Ziel dieser Arbeit war die Entwicklung neuer automatisierter Methoden für beschleunigtes Sampling molekularer Strukturen durch eine Erweiterung von Parrinellos Metadynamik auf Mehrzustandsprobleme und die Verwendung neuer quantenmechanischer elektronischer kollektiver Variablen. Die entwickelten Methoden bieten einen breiten Anwendungsspielraum im Bereich der photophysikalischen Prozesse komplexer molekularer Systeme, welchen in vielen natürlichen Vorgängen wie beispielsweise dem Sehen und der Photosynthese, aber auch in der Entwicklung neuer Materialien für die organische Elektronik eine Schlüsselrolle zukommt. Die Eigenschaften solcher funktioneller Materialien werden durch spezifische elektronische Eigenschaften wie dem Biradikalcharakter bestimmt. KW - Theoretische Chemie KW - Fotochemie KW - Fotophysik KW - Biradikal KW - Molekulardynamik KW - Conical Intersections KW - Konische Durchschneidung KW - Metadynamics KW - Metadynamik Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-191638 ER - TY - THES A1 - Eckstein, Klaus T1 - Linear and Nonlinear Spectroscopy of Doped Carbon Nanotubes T1 - Lineare und Nichtlineare Spektroskopie von dotierten Kohlenstoffnanoröhren N2 - Doping plays a decisive role for the functionality of semiconductor-based (opto-)electronic devices. Hence, the technological utilization of semiconductors necessitates control and a fundamental understanding of the doping process. However, for low-dimensional systems like carbon nanotubes, neither concentration nor distribution of charge carriers is currently well known. The research presented in this thesis investigated the doping of semiconducting carbon nanotubes by spectroscopic methods. Samples of highly purified, intrinsic (6,5) single-wall carbon nanotubes were fabricated using polymer stabilization. Chapter 4 showed that both electro- and redox chemical $p$-doping lead to identical bleaching, blueshift, broadening and asymmetry of the S$_1$ exciton absorption band. The similar spectral changes induced by both doping schemes suggest that optical spectra can not be used to infer what process was used for doping. Perhaps more importantly, it also indicates that the distribution of charges and the character of the charge transfer states does not depend on the method by which doping was achieved. The detailed analysis of the doping-induced spectral changes in chapter 5 suggests that surplus charges are distributed inhomogeneously. The hypothesis of carrier localization is consistent with the high sensitivity of the S$_1$ exciton photoluminescence to additional charge carriers and with the stretched-exponential decay of the exciton population following ultrafast excitation. Both aspects are in good agreement with diffusion-limited contact quenching of excitons at localized charges. Moreover, localized charges act – similar to structural defects – as perturbations to the bandstructure as evidenced by a doping-induced increase of the D-band antiresonance in the mid-infrared spectrum. Quantum mechanical model calculations also suggest that counterions play a crucial role in carrier localization. Counterion adsorption at the nanotube surface is thus believed to induce charge traps of more than 100 meV depth with a carrier localization length on the order of 3 - 4 nm. The doping-induced bleach of interband absorption is accompanied by an absorption increase in the IR region below 600 meV. The observed shift of the IR peak position indicates a continuous transition from localized to rather delocalized charge carriers. This transition is caused by the increase of the overlap of charge carrier wavefunctions at higher charge densities and was modeled by classical Monte-Carlo simulations of intraband absorption. Chapter 6 discussed the spectroscopy of heavily (degenerately) doped nanotubes, which are characterized by a Drude-response of free-carrier intraband absorption in the optical conductivity spectrum. In the NIR spectral region, the S$_1$ exciton and X$+^_1$ trion absorption is replaced by a nearly 1 eV broad and constant absorption signal, the so-called H-band. The linear and transient absorption spectra of heavily doped nanotubes suggest that the H-band can be attributed to free-carrier interband transitions. Chapter 7 dealt with the quantification of charge carrier densities by linear absorption spectroscopy. A particularly good measure of the carrier density is the S$_1$ exciton bleach. For a bleach below about 50 %, the carrier density is proportional to the bleach. At higher doping levels, deviations from the linear behavior were observed. For doping levels exceeding a fully bleached S$_1$ band, the determination of the normalized oscillator strength f$\text{1st}$ over the whole first subband region (trion, exciton, free e-h pairs) is recommended for quantification of carrier densities. Based on the nanotube density of states, the carrier density $n$ can be estimated using $n = 0.74\,\text{nm}^{−1} \cdot (1 − f_\text{1st})$. In the last part of this thesis (chapter 8), the time-resolved spectroelectrochemistry was extended to systems beyond photostable carbon nanotube films. The integration of a flowelectrolysis cell into the transient absorption spectrometer allows the investigation of in-situ electrochemically generated but photounstable molecules due to a continuous exchange of sample volume. First time-resolved experiments were successfully performed using the dye methylene blue and its electrochemically reduced form leucomethylene blue. N2 - Die Dotierung von Halbleitern spielt eine entscheidende Rolle für die Funktionsweise von halbleiterbasierten (opto-)elektronischen Bauteilen. Deshalb erfordert die technische Nutzbarmachung von Halbleitern die Kontrolle und ein fundamentales Verständnis des Dotierungsprozesses. Für niederdimensionale Halbleiter, wie Kohlenstoffnanoröhren, ist momentan weder die Dichte noch die Verteilung von Ladungsträgern genau bekannt. In dieser Arbeit wurde die Dotierung von halbleitenden Kohlenstoffnanoröhren mittels spektroskopischer Methoden untersucht. Proben hochreiner, intrinsischer und einwandiger (6,5)Kohlenstoffnanoröhren wurden durch Polymerstabilisierung hergestellt. In Kapitel 4 wurde gezeigt, dass sowohl die elektro-, als auch die redoxchemische $p$-Dotierung zu einem identischen Bleichen, einer Blauverschiebung, Verbreiterung und Asymmetrie der Absorptionsbande des S$_1$ Exzitons führt. Die ähnlichen spektralen Änderungen, die durch beide Dotierungsverfahren induziert wurden, legen den Schluss nahe, dass optische Spektren nicht zur Identifikation des Dotierungsverfahrens genutzt werden können. Möglicherweise wichtiger ist die Schlussfolgerung, dass die Ladungsverteilung und der Charakter der Ladungen nicht davon abhängt mittels welcher Methode die Dotierung erreicht wurde. Die detaillierte Analyse der durch Dotierung hervorgerufenen spektralen Änderungen in Kapitel 5 deutet eine inhomogene Verteilung der Überschussladungen an. Die Hypothese der Ladungsträgerlokalisierung ist konsistent mit der hohen Sensitivität der Photolumineszenz des S$_1$-Exzitons auf zusätzliche Ladungen und mit dem gestreckt-exponentiellen Zerfall der Exzitonenpopulation nach ultrakurzer Anregung. Beide Aspekte sind in guter Übereinstimmung mit dem diffusionslimitierten Kontaktlöschen von Exzitonen an lokalisierten Ladungen. Weiterhin wirken lokalisierte Ladungen – ähnlich zu strukturellen Defekten – als Störungen der Bandstruktur. Dies wurde durch den dotierungsbedingten Anstieg der D-Bandenantiresonanz im mittleren Infrarot nachgewiesen. Quantenmechanische Modellrechnungen deuten weiterhin darauf hin, dass Gegenionen eine entscheidende Rolle bei der Ladungsträgerlokalisierung spielen. Die Adsorption von Gegenionen an der Nanorohroberfläche induziert Fallenzustände für Ladungen, die mehr als 100 meV tief sind. Weiterhin ergibt sich eine Lokalisierungslänge der Ladungsträger von ungefähr 3 - 4 nm. Das dotierungsbedingte Bleichen der Interbandabsorption wird begleitet von einem Anstieg der Absorption im IR-Bereich unterhalb von 600 meV. Die beobachtete Verschiebung der IR-Peakposition deutet einen kontinuierlichen Übergang von lokalisierten zu delokalisierten Ladungsträgern an. Dieser Übergang wird durch den steigenden Überlapp der Ladungsträgerwellenfunktionen bei höheren Ladungsdichten verursacht und wurde durch klassische Monte-Carlo-Simulationen der Intrabandabsorption modelliert. In Kapitel 6 wurde die Spektroskopie stark dotierter (entartet dotierter) Nanoröhren diskutiert. Dieses zeichnen sich durch eine Drude-Antwort der Intrabandabsorption freier Ladungsträger im Spektrum der optischen Leitfähigkeit aus. Im NIR-Spektralbereich wird die Absorption des S$_1$-Exzitons und des X$^+_1$ -Trions durch ein beinahe 1 eV breites und konstantes Absorptionssignal, die sogenannte H-Bande, ersetzt. Die linearen und transienten Absorptionsspektren stark dotierter Nanoröhren legt den Schluss nahe, dass die H-Bande Interbandübergängen freier Ladungsträger zugeordnet werden kann. Kapitel 7 beschäftigte sich mit der Quantifizierung von Ladungsträgerdichten mittels linearer Absorptionsspektroskopie. Ein besonders gutes Maß für die Ladungsträgerdichte ist das Bleichen des S$_1$ Exzitons. Für ein Bleichen unterhalb von ungefähr 50% ist die Ladungsträgerdichte proportional zum Bleichen. Bei höherer Dotierung wurden Abweichungen vom linearen Verhalten beobachtet. Für Dotierungen jenseits einer vollständig gebleichten S$_1$-Bande wird zur Quantifizierung der Ladungsträgerdichte die Bestimmung der normierten Oszillatorstärke über den gesamten ersten Subbandbereich (Trion, Exziton, freie e-h-Paare) empfohlen. Basierend auf der Zustandsdichte der Nanoröhren kann die Ladungsträgerdichte $n$ mittels $n = 0.74\,\text{nm}^{−1} \cdot (1 − f_\text{1st})$ abgeschätzt werden. Im letzten Teil dieser Arbeit (Kapitel 8) wurde die zeitaufgelöste Spektroelektrochemie auf Systeme jenseits photostabiler Kohlenstoffnanoröhren ausgeweitet. Der Einbau einer Flusselektrolysezelle in das transiente Absorptionsspektrometer erlaubt die Untersuchung von elektrochemisch in-situ hergestellten aber photoinstabilen Molekülen durch einen kontinuierlichen Austausch des Probenvolumens. Die ersten zeitaufgelösten Experimente wurden erfolgreich anhand des Farbstoffs Methylenblau und dessen reduzierter Form Leukomethylenblau durchgeführt. KW - Dotierung KW - Einwandige Kohlenstoff-Nanoröhre KW - Spektroskopie KW - Lokalisation KW - Ladungsträger KW - Ladungsträgerlokalisation KW - zeitaufgelöste Spektroskopie KW - charge carrier localization KW - time-resolved spectroscopy Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-188975 ER - TY - JOUR A1 - Fetsch, Corinna A1 - Gaitzsch, Jens A1 - Messager, Lea A1 - Battaglia, Giuseppe A1 - Luxenhofer, Roberts T1 - Self-Assembly of Amphiphilic Block Copolypeptoids – Micelles, Worms and Polymersomes JF - Scientific Reports N2 - Polypeptoids are an old but recently rediscovered polymer class with interesting synthetic, physico-chemical and biological characteristics. Here, we introduce new aromatic monomers, N-benzyl glycine N-carboxyanhydride and N-phenethyl glycine N-carboxyanhydride and their block copolymers with the hydrophilic polysarcosine. We compare their self-assembly in water and aqueous buffer with the self-assembly of amphiphilic block copolypeptoids with aliphatic side chains. The aggregates in water were investigated by dynamic light scattering and electron microscopy. We found a variety of morphologies, which were influenced by the polymer structure as well as by the preparation method. Overall, we found polymersomes, worm-like micelles and oligo-lamellar morphologies as well as some less defined aggregates of interconnected worms and vesicles. Such, this contribution may serve as a starting point for a more detailed investigation of the self-assembly behavior of the rich class of polypeptoids and for a better understanding between the differences in the aggregation behavior of non-uniform polypeptoids and uniform peptoids. KW - bioinspired materials KW - polymer characterization KW - polymer synthesis KW - polymers KW - self-assembly Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-147855 VL - 6 ER - TY - JOUR A1 - Süß, Jasmin A1 - Wehner, Johannes G. A1 - Dostál, Jakub A1 - Engel, Volker A1 - Brixner, Tobias T1 - Mapping of exciton-exciton annihilation in a molecular dimer via fifth-order femtosecond two-dimensional spectroscopy JF - Journal of Physical Chemistry Letters N2 - We present a theoretical study on exciton–exciton annihilation (EEA) in a molecular dimer. This process is monitored using a fifth-order coherent two-dimensional (2D) spectroscopy as was recently proposed by Dostál et al. [Nat. Commun. 9, 2466 (2018)]. Using an electronic three-level system for each monomer, we analyze the different paths which contribute to the 2D spectrum. The spectrum is determined by two entangled relaxation processes, namely, the EEA and the direct relaxation of higher lying excited states. It is shown that the change of the spectrum as a function of a pulse delay can be linked directly to the presence of the EEA process. KW - exciton-exciton KW - Exziton KW - Spektroskopie KW - EEA KW - 2Dimensionale Spektroskopie KW - exciton Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-178420 UR - https://aip.scitation.org/doi/full/10.1063/1.5086151 N1 - This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in J. Süß et al., J. Chem. Phys. 150, 104304 (2019); https://doi.org/10.1063/1.5086151 and may be found at https://doi.org/10.1063/1.5086151. VL - 150 IS - 10 ER - TY - INPR A1 - Süß, Jasmin A1 - Wehner, Johannes G. A1 - Dostál, Jakub A1 - Engel, Volker A1 - Brixner, Tobias T1 - Mapping of exciton-exciton annihilation in a molecular dimer via fifth-order femtosecond two-dimensional spectroscopy T2 - Journal of Physical Chemistry Letters N2 - We present a theoretical study on exciton–exciton annihilation (EEA) in a molecular dimer. This process is monitored using a fifth-order coherent two-dimensional (2D) spectroscopy as was recently proposed by Dostál et al. [Nat. Commun. 9, 2466 (2018)]. Using an electronic three-level system for each monomer, we analyze the different paths which contribute to the 2D spectrum. The spectrum is determined by two entangled relaxation processes, namely, the EEA and the direct relaxation of higher lying excited states. It is shown that the change of the spectrum as a function of a pulse delay can be linked directly to the presence of the EEA process. KW - Exziton KW - Spektroskopie KW - Exciton KW - 2Dimensionale Spektroskopie KW - EEA KW - exciton-exciton Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-178482 UR - https://aip.scitation.org/doi/full/10.1063/1.5086151 N1 - This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in J. Süß et al.,J. Chem. Phys. 150, 104304 (2019); https://doi.org/10.1063/1.5086151 and may be found at https://doi.org/10.1063/1.5086151 ER - TY - THES A1 - Pachner, Kai T1 - Photodissoziationsreaktionen der Xylyl-Radikale, C\(_8\)H\(_9\), und des Benzyl-Radikals, C\(_7\)H\(_7\): Eine Velocity-Map-Imaging-Studie T1 - Photodissociation reactions of the xylyl radicals, C\(_8\)H\(_9\), and the benzyl radical, C\(_7\)H\(_7\): A velocity-map-imaging study N2 - Die vorliegende Dissertation widmete sich der Aufklärung der Photodissoziationsdynamik der drei Xylyl-Radikale ortho-, meta- und para-Xylyl sowie des Benzyl-Radikals mit Hilfe des Velocity-Map-Imagings. Diese reaktiven Intermediate sind insbesondere im Bereich der Verbrennungschemie von hoher Relevanz, da sie die primären Zerfallsprodukte der Xylole und des Toluols darstellen, welche als Antiklopfmittel in Ottokraftstoffen Verwendung finden.Dementsprechend ist eine Betrachtung des weiteren Zerfalls dieser resonanz-stabilisierten Radikale, insbesondere unter dem Gesichtspunkt der Rußbildung, von entscheidender Bedeutung. Für alle drei Xylyl-Radikale konnte eine selektive pyrolytische Generierung aus den entsprechenden 2-(Methylphenyl)ethylnitriten realisiert werden. Die isomerspezifische Identifikation erfolgte mit Hilfe von REMPI-Spektroskopie der jeweiligen D0 -> D3-Übergänge. Nachfolgend wurde die Photodissoziation aller drei Xylyl-Isomere nach Anregung des D3-Zustandes bei ca. 310 nm und nach Anregung der D-Bande bei 250 nm untersucht. Das „einfachste” Experiment stellte in diesem Zusammenhang die Photodissoziation des para-Xylyl-Radikals dar. Es konnte die von Hemberger et al. in thermischen Zerfallsexperimenten beobachtete Reaktion p-Xylyl -> p-Xylylen + H verifiziert werden. Die VMI-Experimente lieferten die Kennwerte (309.6nm) = 33 % und (250nm) = 19 % unter Erhalt isotroper Images für beide Anregungswellenlängen. Die dazugehörigen Dissoziationsratenkonstanten wurden zu kH(309.6nm) ≈ 10^8 s-1 und kH(250nm) ≈ 5*10^7 s-1 bestimmt. Es ist verblüffend, dass die Photodissoziation scheinbar bei der höheren Anregungswellenlänge von 309.6 nm (und somit bei geringerer Anregungsenergie) schneller verläuft als bei 250 nm. Darüber hinaus ist es nicht möglich, die beobachteten Raten mittels des statistischen Modells der RRKM-Theorie zu beschreiben. Des Weiteren konnten auch die Translationsenergieverteilungen nicht mit dem „Quack-Fit” für statistische Dissoziationen angefittet werden. Bei der Photodissoziation des para-Xylyl-Radikals liegt eine Dissoziation nach Rückkehr in den rovibronisch hochangeregten elektronischen Grundzustand infolge der Photoanregung vor. Hierbei thermalisiert die innere Energie im elektronischen Grundzustand vor der Dissoziation scheinbar nur teilweise, sodass keine vollständige statistische Verteilung dieser innerhalb des para-Xylyls gegeben ist. Da dies eine Grundvoraussetzung der gängigen statistischen Modelle darstellt, ist es nicht verwunderlich, dass keine quantitative Reproduktion der experimentellen Ergebnisse durch Anwendung dieser Modelle ermöglicht wird. Bei entsprechenden Experimenten zum ortho-Isomer konnten diese statistischen Modelle ebenfalls nicht zur quantitativen Beschreibung der Dissoziation verwendet werden. Abermals wurde mit kH(311.1nm) ≈ 10^8 s-1 und kH(250nm) ≈ 5*10^7 s-1 eine schnellere Dissoziation bei geringerer Anregungsenergie festgestellt. Dies erscheint demnach charakteristisch für die Xylyl-Radikale. Innerhalb der VMI-Experimente wurden isotrope Verteilungen erhalten, deren Fragmenttranslationsenergieverteilung nach Anregung des D3-Niveaus bei 311.1 nm jedoch nicht durch die von Hemberger et al. beschriebene Hauptreaktion o-Xylyl -> o-Xylylen + H erklärt werden konnte. Eine Fragmentation nach o-Xylyl -> Benzocyclobuten + H konnte auf diesem Weg als Hauptdissoziationspfad identifiziert werden. Innerhalb der Studien von Hemberger et al. ist eine Reaktion zu Benzocyclobuten bei Anregung mit 311.1 nm energetisch nicht zugänglich. Mittels quantenchemischer Rechnung konnte jedoch ein bislang unbekannter, energetisch zugänglicher Reaktionspfad zur Bildung von Benzocyclobuten unter simultaner Ringschlussreaktion und Wasserstofffragmentation identifiziert und charakterisiert werden. Die Kennwerte der Photodissoziationsreaktion des ortho-Xylyls konnten hierdurch zu (311.1nm) = 30 % und (250nm) = 16 % bestimmt werden. Wie bereits im Fall des para-Isomers liegt die Vermutung nahe, dass es sich um eine Dissoziation aus dem rovibronisch hoch-angeregten elektronischen Grundzustand handelt, welcher nicht vollständig vor der Fragmentation thermalisiert. Im Rahmen der Experimente zum letzten der drei Xylyl-Isomere, dem meta-Xylyl-Radikal, konnte mit VMI eine Fragmentation nach m-Xylyl -> m-Xylylen + H als Hauptdissoziationpfad ausgeschlossen werden. Innerhalb der Experimente nach Anregung des D3-Niveaus um 310 nm konnten mit para-Xylylen und Benzocyclobuten zwei Reaktionsprodukte festgestellt werden, welche die erhaltene Translationsenergieverteilung erklären könnten, wobei die entsprechende maximale Überschussenergie einer Fragmentation zu para-Xylylen den Nullabfall der Verteilung geringfügig besser widerspiegelt. Die mittlere Fragmenttranslationsenergie liegt mit (p-Xylylen) = 29 % respektive (Bcb) = 25 % leicht unterhalb der entsprechenden Kennwerte der para- beziehungsweise ortho-Xylyl Experimente. Durch die nötige, der Dissoziation vorausgehende Isomerisierung scheint ein höherer Thermalisierungsgrad der Schwingungs- und Rotationsenergie innerhalb des elektronischen Grundzustands erreicht zu werden, aus welchem die geringen -Werte resultieren könnten. Der Effekt verminderter -Werte wurde in den Experimenten bei 250 nm nicht gefunden ((p-Xylylen) = 19 % respektive (Bcb) = 17 %). Vergleicht man an dieser Stelle die - anstelle der -Werte ((para) = 0.41 eV, (ortho) = 0.38 eV, (meta) = 0.41 eV), stellt man fest, dass (meta) = (para) gilt und somit ein weiteres Indiz dafür gefunden wurde, dass eine Umlagerung zu para-Xylyl mit anschließender Fragmentation zu para-Xylylen möglicherweise gegenüber jener zum ortho-Isomer mit nachfolgender Bcb-Bildung bevorzugt ist. Dies würde darüber hinaus im Einklang mit den Studien von Hemberger et al. stehen, in welchen beim thermischen Zerfall des meta-Xylyls para-Xylylen als alleiniges Fragmentationsprodukt gefunden wurde. Eine Betrachtung der Umlagerung mittels RRKM wies jedoch keinen bevorzugten Isomerisierungspfad aus. Schlussendlich lässt sich aufgrund der ermittelten Ratenkonstanten (kH(310nm) ≈ 10^8 s-1, kH(250nm) ≈ 4*10^7 s-1) sowie den -Werten vermuten, dass die Isomerisierung langsamer als die Dissoziation bei 310 nm verläuft, jedoch zumindest auf einer ähnlichen Zeitskala wie die entsprechende Dissoziation nach Anregung bei 250 nm. Eine zweifelsfreie Interpretation der meta-Xylyl Experimente gestaltet sich jedoch als schwierig. Innerhalb der Studien zur Photodissoziation des Benzyl-Radikals konnten literaturbekannte Daten zur Fragmentation nach Anregung um 250 nm in guter Übereinstimmung reproduziert werden. Die experimentellen Daten zur Untersuchung der Photodissoziation nach Anregung des D3-Niveaus konnten jedoch nicht eindeutig interpretiert werden. Die literaturbekannte Lage des D3-Niveaus bei 305.3 nm konnte mittels REMPI-Spektroskopie reproduziert werden und anschließende 1H-Photofragmentspektren zeigten, dass eine Anregung des D3-Niveaus zur Bildung von Wasserstofffragmenten führt. Die beobachteten 1H-Fragmente zeigten jedoch eine deutlich zu hohe Überschussenergie für eine Einphotonenabsorption, sodass diese Mehrphotonenabsorptionen zugeordnet werden müssen. Es lässt sich vermuten, dass die Wasserstofffragmente aus einer Anregung eines „superexcited states” oberhalb des Ionisationspotentials, wahrscheinlich durch Zweiphotonenabsorption, stammen. Dieser „superexcited state” zeigt scheinbar keine (vollständige) Autoionisation und führt nachfolgend zumindest teilweise zur Fragmentation des Benzyl-Radikals. In der Folge liegt die Vermutung nahe, dass die Energien eines einzelnen 305 nm-Photons nicht zur Initiierung einer Photodissoziation des Benzyl-Radikals ausreichend ist oder aber, dass diese Photodissoziation zu langsam ist, um sie in einem VMI-Experiment zu beobachten. Potential für weitere Experimente zur Photodissoziation des Benzyl-Radikals nach Anregung des D3-Niveaus wird an dieser Stelle nicht gesehen. N2 - The photodissociation dynamics of the xylyl radicals ortho-, meta- and para-xylyl and the benzyl radical have been studied within this thesis using velocity-map-imaging spectroscopy. The reactive intermediates are the primary fragmentation products in the combustion of xylenes as well as toluene, which are used as fuel additives due to their anti-knock properties. Therefore, these radicals play a key role in combustion chemistry. Accordingly, studies of further reactions of these resonance-stabilized radicals are crucial, especially for the formation of soot. All xylyl isomers were produced selectively via pyrolysis of the corresponding 2-(methylphenyl)ethyl nitrite precursors and identified using REMPI spectroscopy of the D0 -> D3 transition. Afterwards, the dissociation of all three xylyl isomers has been studied after excitation into the D3 level around 310 nm and the D band at 250 nm, respectively. The photodissociation of the para-xylyl radical was the "easiest" experiment. In agreement with thermal decomposition studies of Hemberger et al. p-xylyl -> p-xylylene + H was verified as the fragmentation reaction. VMI experiments yielding isotropic images showed that after excitation at 309.6 nm roughly 33 % of the excess energy is released into translational energy of the dissociation fragments, while at 250 nm the value decreases to approximately 19 %. Values of kH(309.6nm) ≈ 10^8 s-1 and kH(250nm) ≈ 5*10^7 s-1 were measured for the dissociation. The fact that the rate constant of the photodissociation is higher at 309.6 nm than at 250 nm is puzzling. RRKM theory is not suitable to describe the dissociation rate constants. Furthermore, the translational energy distribution could not be fitted using the "quack fit" for statistical dissociations. The fragmentation of the para-xylyl radical occurs in the electronic ground state. After photoexcitation para-xylyl deactivates non-radiatively into a rotational and vibrational highly excited state of the electronic ground state. Due to incomplete thermalization of the electronic ground state prior to dissociation, there is no complete statistical distribution of the internal energy of the xylyl radical. Therefore, an important basic requirement of common statistical models is absent, so that these models are not able to describe the para-xylyl photodissociation quantitatively. Analogous to the para isomer, statistical models cannot describe the ortho-xylyl data quantitatively either. Once again the dissociation rate constant after excitation into the D3 level at 311.1 nm was determined to be larger compared to the dissociation rate constant at 250 nm (kH(311.1nm) ≈ 10^8 s-1, kH(250nm) ≈ 5*10^7 s-1) indicating that this effect is systematic for xylyl isomers. VMI experiments show isotropic angular distributions. The corresponding translational energy distributions of the hydrogen atom fragment at 311.1 nm cannot be explained by the reaction channel o-xylyl -> o-xylylene + H, which was proposed by Hemberger et al. to be the main step in the decomposition pathway. In contrast, a fragmentation to benzocyclobutene (o-xylyl -> benzocyclobutene + H) matches the ET distribution much better. According to Hemberger et al., this pathway should not be accessible at the energy of a 311.1 nm photon. Theoretical studies resulted in an identification of a new, yet unknown fragmentation pathway yielding benzocyclobutene via a direct pathway from ortho-xylyl by simultaneous ring closure and C-H bond fissure, which was computed to be energetically accessible. With this new pathway (311.1nm) = 30 % and (250nm) = 16 % were determined. Analogous to the para isomer, ortho-xylyl also shows a photodissociation after relaxation to the electronic ground state. Furthermore, the assumption of a not fully thermalized electronic ground state holds as well. Meta-xylyl VMI experiments showed that m-xylyl -> m-xylylene + H can be ruled out as the dominant fragmentation path. Experiments around 310 nm led to the identification of two suitable fragmentation products, para-xylylene and benzocyclobutene, which can explain the measured translational energy distribution of the hydrogen atom fragments. In this case, para-xylylene represents the ET distribution slightly better, because the maximum excess energy of a fragmentation yielding para-xylylene is reproduced by the drop-off of the distribution almost exactly. Slightly less energy is released into the translation of the dissociation fragments compared to para-xylyl and ortho-xylyl experiments with (p-xylylene) = 29 % and (bcb) = 25 %, respectively. This suggests that in the meta-xylyl experiments internal distribution is more thermalized in the electronic ground state due to previous isomerisation prior to dissociation, which could lead to lower translational energies of the dissociation fragments. In contrast, this effect was not found ((p-xylylene) = 19 %, (bcb) = 17 %) within the 250 nm experiments. The comparison of instead of values ((para) = 0.41 eV, (ortho) = 0.38 eV, (meta) = 0.41 eV) shows (meta) = (para) indicating that isomerisation to para-xylyl and therefore fragmentation to para-xylylene is prefered over isomerisation to ortho-xylyl and subsequent fragmentation to benzocyclobutene. This observation matches thermal decomposition experiments by Hemberger et al. showing para-xylylene as the only decomposition product of meta-xylyl. RRKM studies do not show a preference of isomerisation to either para- or ortho-xylyl. The determined dissociation rate constants (kH(310nm) ≈ 10^8 s-1, kH(250nm) ≈ 4*10^7 s-1) as well as the values within the VMI experiments suggest that the isomerisation of the meta-xylyl radical is slower than the fragmentation afterwards at 310 nm, but occurs at least on the time scale of the fragmentation at 250 nm. All in all, a reliable interpretation of the meta-xylyl data remains somewhat tentative. Within the benzyl radical studies, literature data of the photodissociation at 250 nm were well reproduced. In contrast, experimental data of the investigation of the photodissociation initiated by excitation into the D3 level at 305.3 nm could not be interpreted unambiguously. Despite the reproduction of the REMPI spectrum of the D3 level known by literature and action spectra showing hydrogen fragments as a result of excitation at 305.3 nm, the translational energy distribution indicates that these hydrogen atoms originate from multi-photon processes instead of a single-photon excitation. Thus, these hydrogen fragments most likely originate from an excitation of a superexcited state above the ionization potential with two photons. It can be presumed that this superexcited state does not show complete autoionization and therefore leads at least partly to a fragmentation of the benzyl radical. Accordingly, the energy of a single photon seems to be too low to initiate a photodissociation or the dissociation could be too slow for an investigation via VMI. At this point, no further potential for additional and profitable photodissociation experiments is seen. KW - Dynamik KW - Laserspektroskopie KW - Photodissoziation KW - Radikal KW - reaktive Intermediate KW - Velocity-Map-Imaging Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-170626 ER - TY - INPR A1 - Müller, Stefan A1 - Draeger, Simon A1 - Ma, Kiaonan A1 - Hensen, Matthias A1 - Kenneweg, Tristan A1 - Pfeiffer, Walter A1 - Brixner, Tobias T1 - Fluorescence-Detected Two-Quantum and One-Quantum-Two-Quantum 2D Electronic Spectroscopy T2 - Journal of Physical Chemistry Letters N2 - We demonstrate two-quantum (2Q) coherent two-dimensional (2D)electronic spectroscopy using a shot-to-shot-modulated pulse shaper and fluorescence detection. Broadband collinear excitation is realized with the supercontinuum output of an argon-filled hollow-core fiber, enabling us to excite multiple transitions simultaneously in the visible range. The 2Q contribution is extracted via a three-pulse sequence with 16-fold phase cycling and simulated employing cresyl violet as a model system. Furthermore, we report the first experimental realization of one-quantum−two-quantum (1Q-2Q) 2D spectroscopy, offering less congested spectra as compared with the 2Q implementation. We avoid scattering artifacts and nonresonant solvent contributions by using fluorescence as the observable. This allows us to extract quantitative information about doubly excited states that agree with literature expectations. The high sensitivity and background-free nature of fluorescence detection allow for a general applicability of this method to many other systems. KW - Zweidimensionale Spektroskopie KW - elektronisch angeregte Zustände KW - Doppelquantenkohärenz KW - Fluoreszenz KW - Optische Spektroskopie KW - Molekülzustand Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173468 UR - https://pubs.acs.org/doi/10.1021/acs.jpclett.8b00541 ER - TY - THES A1 - Le, Thien Anh T1 - Theoretical investigations of proton transfer and interactions or reactions of covalent and non-covalent inhibitors in different proteins T1 - Theoretische Untersuchungen des Protontransfers und Interaktion oder Reaktion von kovalenten und nicht-kovalenten Inhibitoren in verschiedenen Proteinen N2 - Nowadays, computational-aided investigations become an essential part in the chemical, biochemical or pharmaceutical research. With increasing computing power, the calculation of larger biological systems becomes feasible. In this work molecular mechanical (MM) and quantum mechanical approaches (QM) and the combination of both (QM/MM) have been applied to study several questions which arose from different working groups. Thus, this work comprises eight different subjects which deals with chemical reactions or proton transfer in enzymes, conformational changes of ligands or proteins and verification of experimental data. This work firstly deals with reaction mechanisms of aromatic inhibitors of cysteine proteases which can be found in many organisms. These enzymes are responsible for various cancer or diseases as for example Human African Trypanosomiasis (HAT) or the Chagas disease. Aromatic SNAr-type electrophiles might offer a new possibility to covalently modify these proteases. Quantum mechanical calculations have been performed to gain insights into the energetics and possible mechanisms. The next chapter also deals with Trypanosomiasis but the focus was set on a different enzyme. The particularity of Trypanosomiasis is the thiol metabolism which can also be modified by covalent inhibitors. In this context, the wild type and point mutations of the enzyme tryparedoxin have been investigated via molecular dynamic (MD) simulations to examine the influence of specific amino acids in regard to the inhibitor. Experimental data showed that a dimerization of the enzyme occurs if the inhibitor is present. Simulations revealed that the stability of the dimer decreases in absence of the inhibitor and thus confirms these experiments. Further investigations concerning cysteine proteases such as cruzain and rhodesain have been conducted with respect to experimental kinetic data of covalent vinylsulfone inhibitors. Several approaches such as QM or QM/MM calculations and docking, MD or MMPBSA/MMGBSA simulations have been applied to reproduce these data. The utilization of force field approaches resulted in a qualitatively accurate prediction. The kinase AKT is involved in a range of diseases and plays an important role in the formation of cancer. Novel covalent-allosteric inhibitors have been developed and crystallized in complex with AKT. It was shown that depending on the inhibitor a different cysteine residue is modified. To investigate these differences in covalent modification computational simulations have been applied. Enoyl-(acyl carrier) (ENR) proteins are essential in the last step of the fatty acid biosynthesis II (FAS) and represent a good target for inhibition. The diphenylether inhibitor SKTS1 which was originally designed to target the ENR’s of Staphylococcus aureus was also crystallized in InhA, the ENR of Mycobacterium tuberculosis (TB). Crystal structures indicate a change of the inhibitor's tautomeric form. This subject was investigated via MD simulations. Results of these simulations confirmed the tautomerization of the inhibitor. This work also deals with the development of a covalent inhibitor originating from a non-covalent ligand. The target FadA5 is an essential enzyme for the degradation of steroids in TB and is responsible for chronic tuberculosis. This enzyme was crystallized in complex with a non-covalent ligand which served as starting point for this study. Computations on QM or QM/MM level and docking and MD simulations have been applied to evaluate potential candidates. The next chapter focuses on the modification of the product spectrum of Bacillus megaterium levansucrase, a polymerase which catalyzes the biosynthesis of fructans. The covalent modification of the wild type or mutants of the enzyme lead to an accumulation of oligosaccharides but also to polymers with higher polymerization degree. To understand these changes in product spectra MD simulations have been performed. Finally, the proton transfer in catalytic cysteine histidine dyads was investigated. The focus was set on the influence of the relaxation of the protein environment to the reaction. Calculations of the enzymes FadA5 and rhodesain revealed that the preferred protonation state of the dyade depends on the protein environment and has an impact on the reaction barrier. Furthermore, the adaptation of the environment to a fixed protonation state was analyzed via MD simulations. N2 - Heutzutage sind computergestützte Untersuchungen ein essentieller Teil in der chemischen, biochemischen oder pharmazeutischen Forschung. Durch die in den Jahren gestiegene Rechenleistung ist die Berechnung biologischer Systeme möglich. Im Rahmen dieser Arbeit wurden molekularmechanische (MM) und quantenmechanische (QM) Methoden sowie die Kombination beider (QM/MM) für verschiedene Studien eingesetzt, die teilweise aus Fragestellungen verschiedener Arbeitsgruppen hervorgegangen sind. Dadurch umfasst diese Arbeit acht verschiedene Themenkomplexe, bei denen chemische Reaktionen, aber auch der Protonentransfer in Enzymen, Konformationsänderungen von Liganden oder Proteinen und die Verifizierung experimenteller Daten im Fokus standen. Die Arbeit befasst sich anfangs mit Reaktionsmechansimen aromatischer Inhibitoren für Cysteinproteasen, Enzyme, welche in vielen Organismen enthalten sind. Diese Enzyme sind für verschiedene Karzinome oder Krankheiten wie der Afrikanischen Trypanosomiasis oder der Chagas-Krankheit verantwortlich. Aromatische SNAr-Elektrophile bieten hierbei eine neue Möglichkeit der kovalenten Modifikation dieser Proteasen. Quantenmechanische wurden durchgeführt, um Einblicke in die Energetik und mögliche Mechanismen zu erhalten. Das nächste Kapitel befasst sich ebenfalls mit Trypanosomiasis, setzt aber den Fokus auf ein anderes Enzym. Die Besonderheit von Trypanosomiasis ist der Thiol Metabolismus, welcher durch kovalente Inhibitoren modifiziert werden kann. In diesem Kontext wurden der Wildtyp und Punktmutationen des Enzyms Tryparedoxin mittels Molekulardynamik Simulationen untersucht, um Interaktionen einzelner Aminosäuren mit dem kovalenten Inhibitor zu evaluieren. Experimentelle Daten zeigten, dass eine Dimerisierung des Enzyms in Anwesenheit des Inhibitors stattfindet. Durch MD-Simulationen konnte gezeigt werden, dass die Stabilität des Dimers in Abwesenheit des Inhibitors sinkt, wodurch experimentellen Daten bestätigt wurden. Weitere Untersuchungen zu Cysteinproteasen wie Cruzain und Rhodeasin wurden durchgeführt, um experimentelle kinetische Daten von kovalenten Vinylsulfon Inhibitoren zu reproduzieren. Hierbei wurden Methoden wie QM oder QM/MM Rechnungen aber auch Docking, MD und MMPBSA/MMGBSA Simulationen angewandt, um diese Daten zu reproduzieren. In den Untersuchungen zeigte sich, dass die Verwendung der Kraftfeld-basierten Methoden zu qualitativ richtigen Vorhersagen führte. Die Kinase AKT ist in einer Reihe von Krankheiten involviert und spielt eine wichtige Rolle bei der Entstehung von Krebs. Neue kovalent-allosterische Inhibitoren wurden entwickelt und im kovalenten Komplex mit AKT kristallisiert. Die Kristallstrukturen zeigten, dass je nach Inhibitor ein anderes Cystein adressiert wurde. Um diese Unterschiede zu untersuchen, wurden computergestützte Simulationen verwendet. Enoyl-(acyl carrier) (ENR) Proteine sind essentiell für den letzten Schritt in der Fettsäurebiosynthese II (FAS) und bilden ein gutes Target zur Inhibition. Der Diphenylether Inhibitor SKTS1, welchen man ursprünglich als Target für den ENR von Staphylococcus aureus entwarf, wurde auch in InhA, dem ENR von Mycobacterium Tuberculosis (TB), kristallisiert. Die Kristallstrukturen weisen je nach Protein auf einen Wechsel der tautomeren Form des Inhibitors hin. Dieser Sachverhalt wurde mittels MD Simulationen untersucht. Hierbei zeigten die Ergebnisse eine Übereinstimmung mit den experimentellen Daten. Diese Arbeit befasst sich ebenfalls mit der Entwicklung eines kovalenten Inhibitors ausgehend von einem nicht-kovalenten Liganden. Das Target FadA5 ist ein integrales Enzym zur Degradation von Steroiden in TB und ist für die chronische Tuberkulose verantwortlich. Dieses Enzym wurde im Komplex mit einem nicht-kovalenten Liganden kristallisiert, welches als Startpunkt dieser Untersuchungen diente. QM, QM/MM, Docking und MD Simulationen wurden hierbei verwandt, um potentielle Kandidaten zu evaluieren. Das nächste Kapitel befasst sich mit der Modifikation des Produktspektrums von Bacillus megaterium Levansucrase, eine Polymerase, welche die Biosynthese von Fruktanen katalysiert. Durch kovalente Modifikatoren im Wildtyp oder bei Mutanten des Enzyms konnte sowohl eine Anreicherung von Oligosacchariden, aber auch von Polymeren mit höherem Polymerisationsgrad erzielt werden. Um diese Änderungen im Produktspektrum zu verstehen, wurden MD Simulationen durchgeführt. Schließlich wurde die Untersuchung des Protonentransfers in katalytischen Cystein Histidin Dyaden durchgeführt. Hierbei stand der Einfluss der Relaxation der Proteinumgebung auf diese Reaktion im Fokus. Berechnungen in den Enzymen FadA5 und Rhodesain zeigten, dass der präferierte Protonierungszustand der Diade von der Proteinumgebung abhängt und einen großen Einfluss auf die Reaktionsbarriere hat. Um dynamische Effekte einzubeziehen, wurde die Adaption der Umgebung auf einen fixierten Protonierungszustand mittels MD Simulationen analysiert. KW - Computational chemistry KW - Molekularbewegung KW - QM/MM KW - proteins KW - covalent and non-covalent inhibitors KW - Protonentransfer KW - Enzyminhibitor KW - molecular dynamics Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-170511 ER - TY - JOUR A1 - Hoche, Joscha A1 - Schulz, Alexander A1 - Dietrich, Lysanne Monika A1 - Humeniuk, Alexander A1 - Stolte, Matthias A1 - Schmidt, David A1 - Brixner, Tobias A1 - Würthner, Frank A1 - Mitric, Roland T1 - The origin of the solvent dependence of fluorescence quantum yields in dipolar merocyanine dyes JF - Chemical Science N2 - Fluorophores with high quantum yields are desired for a variety of applications. Optimization of promising chromophores requires an understanding of the non-radiative decay channels that compete with the emission of photons. We synthesized a new derivative of the famous laser dye 4-dicyanomethylen-2-methyl-6-p-dimethylaminostyryl-4H-pyran (DCM),i.e., merocyanine 4-(dicyanomethylene)-2-tert-butyl-6-[3-(3-butyl-benzothiazol-2-ylidene)1-propenyl]-4H-pyran (DCBT). We measured fluorescence lifetimes and quantum yields in a variety of solvents and found a trend opposite to the energy gap law.This motivated a theoretical investigation into the possible non-radiative decay channels. We propose that a barrier to a conical intersection exists that is very sensitive to the solvent polarity. The conical intersection is characterized by a twisted geometry which allows a subsequent photoisomerization. Transient absorption measurements confirmed the formation of a photoisomer in unpolar solvents, while the measurements of fluorescence quantum yields at low temperature demonstrated the existence of an activation energy barrier. KW - solvent-dependent fluorescence yield Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-198707 UR - https://doi.org/10.1039/C9SC05012D VL - 10 ER - TY - THES A1 - Welz, Eileen T1 - Theoretical Investigations on Inorganic, Boron-containing Biradicals with a unique Structure T1 - Theoretische Untersuchungen von anorganischen, biradikalischen Borverbindungen mit einer einzigartigen Struktur N2 - In this work, biradical boron containing systems with various structures are investigated to reveal the dependency of the biradical character on the ligated carbene (NHC, CAAC) and the related steric demands of the substituents. N2 - In dieser Arbeit werden biradikalische Bor-Systeme mit unterschiedlichen Strukturen untersucht, um die Abhängigkeit des biradikalischen Charakter von der Carben-Einheit, die am Bor (NHC, CAAC) gebunden ist, und den sterischen Anspruch der Substituenten zu analysieren. KW - Biradical KW - Bor KW - theoretical chemistry KW - SF-DFT KW - Benchmark KW - CAAC KW - NEVPT2 KW - NHC Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-202598 ER - TY - THES A1 - Schilling, Daniel T1 - Zur spektralen Diffusions- und Energietransferdynamik in halbleitenden einwandigen Kohlenstoffnanoröhren T1 - Spectral diffusion and energy transfer dynamics in semiconducting single wall carbon nanotubes N2 - Einwandige Kohlenstoffnanoröhren weisen aufgrund ihrer besonderen Struktur viele für ein rein kohlenstoffhaltiges Makromolekül ungewöhnliche Eigenschaften auf. Dies macht sie sowohl für die Erforschung grundlegender Phänomene in eindimensionalen Nanostrukturen als auch für potenzielle Anwendungen äußerst interessant. Da alle Atome einer SWNT Oberflächenatome sind, führt dies zu einer besonders ausgeprägten Empfindlichkeit ihrer elektronischen Eigenschaften auf Wechselwirkungen mit der Umgebung. Lokale zeitabhängige Änderungen in diesen Wechselwirkungen führen daher zu Phänomenen wie dem Photolumineszenz-Blinken und spektraler Diffusion. Die Erforschung und Kontrolle der Parameter, die für die Beeinflussung der elektronischen Eigenschaften von SWNTs durch Umgebungseinflüsse entscheidend sind, wird neben der spezifischen Synthese eine maßgebliche Rolle dabei spielen, ob und in welcher Form SWNTs in optoelektronischen Bauteilen zukünftig Anwendung finden. Die vorliegende Arbeit liefert einen Beitrag zum Verständnis dieser Wechselwirkungen, indem die Dynamik von Energietransferprozessen innerhalb von SWNTs und zwischen SWNTs untersucht wurde. Im Rahmen dieser Arbeit wurden homogene und inhomogene Beiträge zur Linienverbreiterung von in einer Matrix eingebetteten SWNTs bestimmt. Dabei wurde erstmals beobachtet, dass die spektrale Diffusion sowohl bei Raumtemperatur als auch bei 17 K auf einer ultraschnellen Zeitskala, d. h. innerhalb von weniger als 1 ps abläuft. Mittels transienter Lochbrennspektroskopie konnte gezeigt werden, dass die homogene Linienbreite von (6,5)-SWNTs mit 3.6 meV nur den geringsten Beitrag zur Absorptionslinienbreite liefert, während die größte Verbreiterung mit mehr als 99 % inhomogen ist. Die inhomogene Linienbreite wurde aus inkohärenten 2D-Spektren, welche durch spektrale Lochbrennexperimente bei Variation der Anregungswellenlänge erhalten werden konnten, zu \(54\pm5\)meV bestimmt. Die Dynamik der spektralen Diffusion wird mit einer Exzitonendiffusion in einer durch lokale Umgebungswechselwirkungen verursachten inhomogenen Energielandschaft entlang der Nanorohrachse erklärt. Durch zeitaufgelöste Lochbrennexperimente unter nichtresonanter Anregung konnte gezeigt werden, dass die Populationsumverteilung innerhalb dieser Energielandschaft für eine energetisch abwärts gerichtete Relaxation ein spontaner Prozess ist. Im umgekehrten Fall ist sie dagegen thermisch aktiviert. Mögliche Einflüsse von Artefakten wurden anhand von Referenzmessungen diskutiert und die Bestimmung der homogenen Linienbreite durch komplementäre CW-Lochbrennexperimente ergänzt. Durch Monte-Carlo-Simulationen konnten erstmals Informationen über die Form der Potenzialenergielandschaft entlang einer SWNT erhalten und die Größenordnung der Plateaubreite mit nahezu konstanter Energie innerhalb der Potenziallandschaft zu 5.8-18.2nm ermittelt werden. Dies gelang durch eine Kalibrierung der Simulationszeit anhand experimenteller transienter Absorptionsspektren. Im Rahmen dieses Modells wurde darüber hinaus die Zeit für einen Sprung zu einem benachbarten Gitterplatz der Energielandschaft zu 0.1 ps bestimmt. Inter- und intraband-Relaxationsprozesse von SWNTs wurden mittels Photolumineszenzspektroskopie untersucht. Die Ergebnisse deuten auf eine temperaturunabhängige Effizienz der internen Konversion und die photostimulierte Generierung von Löschzentren hin. Anhand temperaturabhängiger PL-Messungen, die erstmals bei Anregung des \(S_1\)-Zustands durchgeführt wurden, konnte die Energiedifferenz zwischen dem hellen und dunklen Exziton für (6,5)-SWNTs im Rahmen des Modells eines Dreiniveausystems zu \(\delta = (3.7\pm0.1)\)meV bestimmt werden. Aus der guten Übereinstimmung des temperaturabhängigen Trends der PL-Intensität unter \(S_1\)-Anregung mit in früheren Studien erhaltenen Ergebnissen unter \(S_2\)-Anregung konnte geschlussfolgert werden, dass die Effizienz der internen Konversion nicht ausgeprägt temperaturabhängig ist. Für SWNT-Gelfilme wurde unter \(S_2\)-Anregung eine deutliche Abweichung zur \(S_1\)-Anregung in Form eines Bleichens der Photolumineszenz beobachtet. Dieses Phänomen ist in der Literatur wenig diskutiert und wurde daher in leistungsabhängigen PL-Experimenten weiter untersucht. Dabei wurde für die \(S_2\)- im Vergleich zur \(S_1\)-Anregung eine stärker ausgeprägte sublineare Leistungsabhängigkeit gefunden. Die Abweichung vom linearen Zusammenhang der PL-Intensität mit der Leistung trat hier schon bei um eine Größenordnung geringeren Leistungsdichten auf als in früheren Studien und kann mit einer Exziton-Exziton-Annihilation allein nicht erklärt werden. Möglicherweise ist die Öffnung zusätzlicher Zerfallskanäle durch metastabile Löschzentren für dieses Verhalten verantwortlich. Die PL-Experimente zeigten zudem ein zeitabhängiges irreversibles Bleichen unter \(S_2\)-Anregung, welches bei 30 K stärker ausgeprägt war als bei Raumtemperatur. Dessen Abhängigkeit von der eingestrahlten Photonenzahl lässt auf eine Akkumulation von Löschzentren schließen. Daher wird eine mögliche Redoxreaktion mit Wasser, ausgelöst durch die intrinsische p-Dotierung der SWNTs, als Quelle der Löschzentren diskutiert. Das Verzweigungsverhältnis für die Relaxation nach \(S_2\)-Anregung von SWNTs wurde in Form der relativen Quantenausbeute bestimmt und eine nahezu quantitative interne Konversion des \(S_2\)-Exzitons gefunden. Dieses Ergebnis hat eine wichtige Bedeutung für potenzielle Anwendungen von SWNTs in der Photovoltaik, da die Verluste durch die interband-Relaxation bei einer Anregung des zweiten Subband-Exzitons <3% zu sein scheinen. Die Herausforderung des Experiments wird hier durch die geringe Stokes-Verschiebung von SWNTs verursacht, die eine quantitative Trennung von PL- und Streulicht unmöglich macht. Daher wurde ein Aufbau realisiert, in dem ein großer Teil des Streulichts bereits räumlich entfernt wird und die PL unter \(S_1\)- bzw. \(S_2\)-Anregung quantifizierbar und ohne eine Annahme über Streulicht-Anteile direkt vergleichbar ist. Sowohl für SDS- als auch für Polymer-stabilisierte SWNTs wurde eine relative Quantenausbeute von \(\xi \approxeq 1\) erhalten, was eine nahezu quantitative interne Konversion von \(S_2\)- zu \(S_1\)-Exzitonen innerhalb der PL-Lebensdauer nahelegt. Anregungsenergietransferprozesse zwischen Kohlenstoffnanoröhren in mono- und bidispersen SWNT-Netzwerkfilmen definierter Zusammensetzung wurden mittels zeitaufgelöster Polarisationsanisotropie untersucht. Dabei wurden neben einem ultraschnellen Energietransfer in weniger als 1 ps auch Hinweise auf Beiträge des \(S_2\)-Exzitons an diesem Prozess gefunden. Die Ergebnisse der Experimente mit bidispersen SWNT-Netzwerkfilmen bestätigen den auch in PLE-Spektren beobachteten energetisch abwärts gerichteten Energietransfer von SWNTs mit großer zu solchen mit kleiner Bandlücke und liefern darüber hinaus eine Zeitskala von weniger als 1 ps für diesen Prozess. Die umgekehrte Transferrichtung konnte weder aus dem \(S_1\)- noch aus dem \(S_2\)-Exziton beobachtet werden. Eine Beschleunigung der Anisotropiedynamik bei \(S_2\)- im Vergleich zu S\uu1-Anregung deutet auf einen Beitrag des \(S_2\)-Exzitons am Energietransferprozess in Konkurrenz zur internen Konversion hin. Durch Referenzexperimente mit monodispersen Netzwerkfilmen konnte eine Beteiligung von Energietransferprozessen zwischen SWNTs der gleichen Chiralität auf einer Zeitskala von 1-2ps nachgewiesen werden. Dadurch konnten Beobachtungen von zeitabhängigen Anisotropieänderungen, die einen energetisch aufwärts gerichteten Energietransfer suggerieren, mit einem intra-Spezies-Transfer erklärt werden - Hinweise auf energetisch aufwärts gerichtete EET-Prozesse wurden nicht gefunden. Eine wichtige Erkenntnis aus diesen Experimenten ist die Tatsache, dass die Überlappung von Signalbeiträgen zu einer Verfälschung der Anisotropie und damit zu fehlerhaften Interpretationen führen kann. Darüber hinaus wurde auf den Einfluss der Probenheterogenität und der Alterung von SWNT-Netzwerkfilmen hingewiesen. Diese Untersuchungen legen nahe, dass ein effizienter Exzitonentransfer in SWNT-Netzwerkfilmen auch zwischen den einzelnen Röhrensträngen erfolgen kann und es somit möglich ist, die Effizienz entsprechender Solarzellen zu verbessern. Im letzten Teil der Arbeit wurden erstmals transiente Absorptionsexperimente im Femtosekundenbereich mit SWNTs unter \(Gate-Doping\) durchgeführt. In ersten Experimenten konnte gezeigt werden, dass analog zur chemischen Dotierung von SWNTs die Dynamik des \(S_1\)-Bleichens eines (6,5)-SWNT-Netzwerkfilms nach \(S_2\)-Anregung unter \(Gate-Doping\) eine Beschleunigung durch zusätzliche Zerfallskanäle erfährt. Die elektrochemische Bandlücke wurde für (6,5)-Nanoröhren zu 1.5 eV bestimmt. Eine Verringerung der Photoabsorptionsamplitude mit zunehmendem Potenzial lässt Vermutungen über die Natur dieses in transienten Absorptionsexperimenten beobachteten PA-Merkmals in Form der Absorption einer dotierten SWNT-Spezies zu. Diese Untersuchungen liefern erste Einblicke in die Art und Weise, wie eine elektrochemische Modifizierung von SWNTs die elektronische Bandstruktur und Ladungsträgerdynamik verändert. N2 - Due to their unique structure single wall carbon nanotubes exhibit many exceptional properties compared to other carbon based macromolecules. Their striking properties make SWNTs ideal candidates for the investigation of fundamental phenomena in one-dimensional nanostructures as well as for potential applications. Since all carbon atoms are at the SWNT surface their electronic properties are strongly sensitive towards local environmental interactions. Time-dependent local modifications of these interactions result in phenomena like photoluminescence blinking and spectral diffusion. In addition to specific synthesis, the investigation as well as the proper control of the parameters that affect the environmental influence on the electronic properties of SWNTs will be key factors for the question if and how SWNTs will be used in future optoelectronic devices. This thesis contributes to the understanding of these environmental interactions by means of an investigation of energy transfer dynamics within and between SWNTs. Within the scope of this work, homogeneous and inhomogeneous contributions to the line broadening of matrix embedded SWNTs were determined. It was observed for the first time that spectral diffusion takes place on an ultrafast time scale within less than 1 ps both, at room temperature and at 17 K. Transient hole-burning spectroscopy was used to show, that the homogeneous linewidth of (6,5)-SWNTs is 3.6 meV and thus contributes only a small fraction to the absorption linewidth, whereas inhomogeneous broadening represents the largest contribution with more than 99 %. The inhomogeneous linewidth was deduced from incoherent 2D-spectra which were obtained by excitation wavelength dependent hole-burning spectroscopy. The dynamics of spectral diffusion is consistent with an exciton diffusion in an inhomogeneous energy landscape along the SWNT axis, caused by local environmental interactions. Off-resonant spectral hole-burning experiments revealed that a bathochromic spectral diffusion is a spontaneous process, whereas its hypsochromic equivalent is thermally activated. Control experiments were performed to show possible influences of artifacts on the determination of the homogeneous linewidth. The latter was accompanied by means of complementary CW hole-burning spectroscopy experiments. From Monte-Carlo simulations information about the granularity of the potential energy landscape along the SWNT axis was obtained. The width of plateau regions with nearly constant energy was found to be in the range of 5.8-18.2nm. This was accomplished by calibration of the simulation time on the basis of experimental transient absorption spectra. Within this model the time interval for a population hop to adjacent lattice sites was deduced to be on the order of 0.1 ps. Inter- and intraband relaxation processes of SWNTs were investigated by means of photoluminescence spectroscopy. The results suggest that the efficiency of internal conversion is temperature-independent and that quenching centers are generated by irradiation of SWNTs with light. From the PL temperature dependence, which was carried out under \(S_1\) excitation for the first time, the energy splitting \(\delta\) between the bright and dark exciton states for (6,5)-SWNTs was determined. Within the model of a three level system a value of \(\delta = 3.7\pm0.1\)meV was deduced. The good agreement of the temperature dependence of PL intensity under \(S_1\) excitation with previously published studies under \(S_2\) excitation suggests, that the efficiency of internal conversion exhibits no pronounced temperature dependence. A strong PL bleaching was observed for SWNT gelatin films under \(S_2\) excitation, which has not been found in case of \(S_1\) excitation. Since this discrepancy is only little discussed in literature, power dependent PL experiments were performed for further investigation. For \(S_2\) excitation the sublinear power dependence was found to be more pronounced compared to \(S_1\) excitation. The deviation of PL intensity from a linear trend with increasing excitation power occurred at excitation densities which are one order of magnitude lower as compared to earlier studies and cannot be explained by pure exciton-exciton annihilation. Instead, additional relaxation channels seem to be opened, possibly by the formation of metastable quenching species. The PL experiments also revealed an irreversible time-dependent bleaching under \(S_2\) excitation which was found to be more pronounced at 30 K compared to room temperature. The bleaching dependence on the photon number suggests an accumulation of quenching sites. A possible candidate might be a quenching SWNT species formed by a redox reaction with water in presence of intrinsic p-doping. The branching ratio for relaxation after \(S_2\) excitation was determined as the relative PL quantum yield of the second and first subband exciton for which an almost quantitative internal conversion was deduced. This result is important for potential applications of SWNTs in photovoltaic devices since the loss due to interband relaxation of the \(S_2\) exciton seems to be < 3%. The small Stokes shift in SWNTs hampers the quantitative separation of PL and excitation intensity. In order to avoid contributions from scattered excitation light, a setup was implemented that allows spatial removal of a large fraction of excitation intensity. Furthermore, the PL intensity for both excitation pathways can be quantified at the same time within the same setup and without assumptions about stray light contributions. For SDS- as well as polymer-stabilized SWNT dispersions a relative quantum yield of \(\xi \approxeq 1\) was determined which suggests, that internal conversion of \(S_2\) excitons has a quantum yield of almost unity within the PL lifetime. Excitation energy transfer processes between carbon nanotubes in mono- and bidisperse SWNT network films of predefined composition were investigated by means of time-resolved polarization anisotropy. An ultrafast energy transfer within less than 1 ps as well as contributions of the \(S_2\) exciton to EET were found. The results confirm observations of downhill energy transfer in bidisperse network films from larger to smaller bandgap SWNTs as observed in PLE spectra. The transfer occurs in less than one picosecond. An uphill energy transfer from small to large bandgap tubes has been observed neither for \(S_1\) nor for \(S_2\) excitation. An increase of anisotropy decay rate for \(S_2\) excitation suggests a contribution of energy transfer from the \(S_2\) state as a competing pathway. From reference experiments with monodisperse SWNT network films evidence for a contribution of energy transfer between the same SWNT species within 1-2 ps was provided. This explains consistently the observation of an anisotropy decay after excitation of small band gap tubes in bidisperse networks which could be misinterpreted as an uphill energy transfer. One of the key findings in this work is the fact that anisotropy values might be corrupted due to signal overlap in the transient absorption spectra. Furthermore, it was pointed out that effects of sample heterogeneity and film aging might be important in the context of applications of SWNT thin films under ambient conditions. The results suggest that efficient exciton transfer in SWNT network films is possible between individual SWNT fibers, which can help to improve the efficiency of corresponding photovoltaic devices. In the last part of this work transient absorption experiments on the femtosecond time-scale were performed with SWNTs in the presence of gate doping for the first time. The experiments show that analogous to the case of chemical doping the dynamics of the \(S_1\) bleach recovery of a (6,5)-SWNT network film accelerate in the presence of gate doping. This demonstrates that doping opens an additional relaxation channel. The electrochemical band gap was determined for (6,5)-SWNTs from transient absorption spectroscopy to be 1.50 eV. The observation of a decrease in photoabsorption amplitude with increasing potential leads to speculations about the nature of the PA as an absorption of a doped SWNT species. The investigation provides first insight into the way how electrochemical modification of SWNTs alters their electronic band structure and charge carrier dynamics. KW - Einwandige Kohlenstoff-Nanoröhre KW - Photolumineszenzspektroskopie KW - Pump-Probe-Technik KW - Exziton KW - (6,5)-Kohlenstoffnanoröhre KW - Spektrale Diffusion KW - Energietransfer Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-122772 ER - TY - JOUR A1 - Ojha, Animesh K. A1 - Forster, Stefan A1 - Kumar, Sumeet A1 - Vats, Siddharth A1 - Negi, Segeeta A1 - Fischer, Ingo T1 - Synthesis of well-dispersed silver nanorods of different aspect ratios and their antimicrobial properties against gram positive and negative bacterial strains JF - Journal of Nanobiotechnology N2 - In the present contribution, we describe the synthesis of highly dispersed silver nanorods (NRs) of different aspect ratios using a chemical route. The shape and size of the synthesized NRs were characterized by Transmission Electron Microscopy (TEM) and UV-visible spectroscopy. Longitudinal and transverse absorptions bands confirm the rod type structure. The experimentally recorded UV-visible spectra of NRs solutions were fitted by using an expression of the extinction coefficient for rod like nano structures under the dipole approximation. Simulated and experimentally observed UV-visible spectra were compared to determine the aspect ratios (R) of NRs. The average values of R for NR1, NR2 and NR3 solutions are estimated to be 3.0 +/- 0.1, 1.8 +/- 0.1 and 1.2 +/- 0.1, respectively. These values are in good agreement with those obtained by TEM micrographs. The silver NRs of known aspect ratios are used to study antimicrobial activities against B. subtilis (gram positive) and E. coli (gram negative) microbes. We observed that the NRs of intermediate aspect ratio (R = 1.8) have greater antimicrobial effect against both, B. subtilis (gram positive) and E. coli (gram negative). The NRs of aspect ratio, R = 3.0 has better antimicrobial activities against gram positive than on the gram negative. KW - silver KW - nano rods KW - TEM KW - antimicrobial activities KW - nanowire formation KW - gold nanoparticles KW - Raman-scattering KW - nanostructures KW - particles Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-122837 SN - 1477-3155 VL - 11 IS - 42 ER - TY - JOUR A1 - Falge, M. A1 - Engel, V. A1 - Gräfe, S. T1 - Time-resolved photoelectron spectroscopy of coupled nuclear-electronic dynamics JF - EPJ Web of Conferences N2 - We study the effect of nuclear-electron coupling on time-resolved photo-electron spectra, employing a model system which allows to directly comparing spectra resulting from the adiabatic approximation with those obtained within a non-Born-Oppenheimer description. Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-121812 SN - 2100-014X VL - 41 ER - TY - THES A1 - Li, Han T1 - Fabrication of Carbon Nanotube Thin Films by Evaporation-Induced Self-Assembly T1 - Herstellung dünner Kohlenstoffnanorohr-Filme mittels verdunstungsinduzierter Selbstanordnung N2 - In summary, we have prepared single-wall carbon nanotube (SWNT) thin films by the method of evaporation-induced self-assembly (EISA). Using the scalable two-plate or lens setups, sorts of different film types or patterns of SWNTs has been successfully fabricated directly from the evaporation of solvents and could be precisely controlled by the concentrations of SWNT in ambient conditions. The special geometry of meniscus as the capillary bridge has not only given rise to a much higher efficiency of fabrication than what previously reported but also allowed us to monitor the pinning and depinning process carefully and further investigate the mechanism underlying the formation of different film morphologies. In contrast with the conventional "stick-slip" model, we have provided the new dynamical pinning and zipping model for the contact line (CL) behavior. By analyzing the motion of CL and varying deposited patterns, the traditionally so-called "stick" state should be treated as a dynamical pinning process due to the interfacial tension contrast between SWNT-covered and bare silicon surface. Besides, the plausible one-step "slip" motion could be dominated by the zipping-like kink propagation. In addition, the experiments with heated substrates at higher temperatures between 30°C and 50 °C have shown that the striped pattern could be fabricated by both much lower SWNT and SDS concentrations than that in room temperature, which is consistent with our model of interfacial tension contrast. In this situation, the deposition rate was increased but the quality of SWNT alignment was undermined because the corresponding moving velocity of SWNT was also too fast for SWNTs to rotate when the evaporative rate was high. The similar results were identified by the SWNT/polymer conjugates dispersed in chloroform under the similar setups and other identical conditions. The typical breathing motion of dynamical pinning and zipping-like propagation for depinning were confirmed by the new suspensions despite that some morphological parameters changed dramatically compared with that from the aqueous solution. For example, the spacing between stripes reached 100 µm ~ 200 µm because the large contact angle contrast between HDMS- and SWNT-covered surface accompanies with the high evaporation rate of chloroform in the pinning and depinning process. Likewise the average CL velocity for fabrication reached around 20 µm/s due to the much higher evaporation rate of chloroform than water. Using alike suspensions, the modified EISA method called dose-controlled floating evaporative self-assembly (DFES) was employed to implement the self-assembly of SWNTs on the water/air interface and then deposit them on solid substrate by directed floating. Although the stripes were fabricated successfully by drops with certain doses and SWNT concentrations, there inevitably existed randomly oriented SWNTs from the water surface that built networks between the stripes containing well-aligned tubes. In order to slow down the evaporation rate and monitor the process detailedly, we used chlorobenzene as the solvent instead of chloroform and find the typical pinning/depinning movement of the CL. A preliminary analysis of the results in terms of chlorobenzene implied that the CL possibly followed the similar pinning/depinning process in consistence with our model with capillary bridge. In the last part of the thesis, the primary research on the optical properties of these stripes of ultrahigh purity semiconducting nanotubes was conducted by fluorescence microscopy and photoluminescence excitation (PLE) spectroscopy. The energy transfer of the photogenerated excitons was confirmed between different tube species with controlled band gaps. In short, the experiments performed in this thesis allowed to gain new insights about the fabrication of large-area SWNT thin films by the cost-effective solution-processed method and most importantly to uncover its intrinsic mechanism as well. Combined with the separation and selection technique like density gradient centrifugation or polyfluorene derivatives assisted method, highly monodisperse semiconducting nanotubes could be deposited into organized, controllable and functional arrays. Beyond the ambient conditions, precise control for the evaporation under preset temperature and vapor pressure could possibly extend the technique to the industry level. Assisted by some other mature techniques such as roll-to-roll printing, the cost-effective method could be widely used in the manufacture of various thin film devices. More complex 2D or even 3D structures could be designed and accomplished by the method for the functional or stretchable requirements. Further research on the fundamental exciton transition and diffusion in different networks or structures of SWNTs will be the significant precondition for the real applications. Looking ahead, from the individual carbon nanotube to its thin film, this promising material with outstanding properties had many challenges to overcome before the real-world applications. Thanks to the availability of pure and well-defined materials, the scalable solution-processed approaches for fabrication of thin films should be able to unlock the potential of carbon nanotubes and exploit them in (opto-)electronic devices in the foreseeing future. N2 - Im Rahmen der vorliegenden Arbeit wurden über die Methode der Verdunstungsinduzierten Selbstanordnung (evaporation-induced self-assembly, EISA) dünne Filme aus einwandigen Kohlenstoffnanoröhren (SWNTs) hergestellt. Die Verwendung eines individuell anpassbaren Zwei-Platten- oder Linsen-Aufbaus ermöglichte durch präzise Kontrolle der Konzentrationen der verwendeten SWNT-Suspensionen und der unterschiedlichen Reaktionsbedingungen die Herstellung verschiedenster Arten und Anordnungen von SWNT-Dünnfilmen. Durch Ausnützen der speziellen Geometrie des Meniskus einer Kapillarbrücke zwischen zwei Oberflächen konnte nicht nur eine effizientere Herstellung im Vergleich zu früheren Veröffentlichungen erzielt werden, sondern es konnte auch der Mechanismus der Selbstanordnung (Pinning und Depinning) in Abhängigkeit der Reaktionsbedingungen und die resultierende Dünnfilmmorphologie untersucht werden. Es konnte gezeigt werden, dass im Gegensatz zum gängigen "stick-slip" Modell durch ein dynamisches Reißverschluss-Modell (dynamical pinning and zipping model) das Verhalten an der Kontaktlinie (contact line, CL) besser beschrieben werden kann. Eine Analyse der CL-Bewegung unter unterschiedlichen Abscheidungsbedingungen führte zu dem Schluss, dass der bisher verwendete "Stick"-Zustand als dynamischer Pinning-Zustand betrachtet werden sollte, dessen Zustandekommen auf der unterschiedlichen Oberflächenspannung zwischen SWNT-bedeckten und -freien Bereichen auf der Abscheidungsoberfläche beruht. Beim bisher als einschrittige "Slip"-Bewegung beschriebenen Fortschreiten der CL ist dagegen eine Reißverschluss-ähnliche Knick-Bewegung vorherrschend. Weiterführende temperaturabhängige Abscheidungsstudien zur Dünnfilmpräparation konnten zeigen, dass Dünnfilme in Streifenanordnung bei wesentlich geringeren SWNT- und Seifenkonzentrationen im Vergleich zu Raumtemperatur hergestellt werden können. Auch diese Prozesse konnten durch das oben beschriebene Oberflächenspannungskontrastmodell erklärt werden. Die Abscheidungsrate nimmt mit höherer Temperatur zu, wobei die Ordnung der abgeschiedenen SWNTs im Dünnfilm abnimmt, da die Bewegungsgeschwindigkeit hin zur CL im Vergleich zur Rotationsgeschwindigkeit stark zunimmt. Auch für SWNT/Polymer Suspensionen in organischen Lösungsmitteln konnte das Verhalten der CL nach dem dynamischen Reißverschluss-Modell erklärt werden und gestreifte Dünnfilme hergestellt werden. Die Filmmorphologie und der Streifenabstand unterschieden sich jedoch maßgeblich von denen aus wässrigen SWNT Suspensionen hergestellten Dünnfilmen. Hierfür ist auch die mit 20 µm/s sehr hohe Herstellungsgeschwindigkeit verantwortlich. Unter Verwendung der organischen SWNT Suspensionen wurden auch Experimente zu einer von EISA entlehnten Abscheidungsmethode (dose-controlled floating evaporative self-assembly, DFES) durchgeführt. Hierbei wurden gestreifte SWNT Dünnfilme durch SWNT-Selbstanordnung schwimmend an der Flüssig/Luft-Grenzfläche und anschließender Abscheidung auf festem Substrat hergestellt. Auch hier konnte ein CL-verhalten, welches dem dynamischen Reißverschluss-Modell folgt nachgewiesen werden. Detailliertere Betrachtung des Zwischenstreifenraumes zeigte jedoch willkürlich angeordnete SWNTs unabhängig der Herstellungsparameter. Im letzten Teil der Dissertation wurden mittels Fluoreszenz-Anregungs-Spektroskopie und Fluoreszenzmikroskopie die optischen Eigenschaften der Streifen-Dünnfilme, bestehend aus hochaufgereinigten halbleitenden SWNTs untersucht. Bei Streifenmustern aus unterschiedlichen SWNT Spezies konnte ein Energietransfer der exzitonischen angeregten Zustände zwischen SWNTs mit unterschiedlicher Bandlücke nachgewiesen werden. Zusammengefasst lässt sich sagen, dass die im Rahmen dieser Dissertation durchgeführten Experimente ein tieferes Verständnis der Herstellung großflächiger SWNT Dünnfilme durch Entdeckung des zugrundeliegenden Mechanismus ermöglichten. In Kombination mit Auftrennungsverfahren wie Dichtegradientenultrazentrifugation oder Polymer-basierten Ansätzen können so monodisperse, halbleitende SWNTs kontrolliert zu geordneten, funktionellen Arrays angeordnet werden. Präzise Kontrolle der Umgebungsbedingungen, wie Temperatur oder Druck, könnten die Technik auch für industrielle Anwendung interessant machen. Unterstützt durch etablierte Methoden wie dem Rollendruck könnte die kostengünstige Methode großflächig zur Herstellung von verschiedenen Dünnfilmen zur Anwendung kommen. Komplexere, funktionelle, dehnbare 2D oder 3D Strukturen könnten so entworfen werden. Weitere Untersuchungen hinsichtlich der exzitonischen Übergänge und Exzitondiffusion in solchen SWNT-Netzwerken oder -Strukturen wären die Grundvoraussetzung für tatsächliche Anwendungsmöglichkeiten. Vorausschauend lässt sich sagen, dass auf dem Weg von der individuellen Nanoröhre hin zu SWNT Dünnfilmen noch zahlreiche Herausforderungen bestehen, bevor eine reale Anwendung dieser vielversprechenden Materialien möglich erscheint. Durch hochreines und wohldefiniertes Ausgangsmaterial könnte die frei skalierbare Herstellung von SWNT Dünnfilmen über die hier beschriebenen Methoden aber eine Anwendungsmöglichkeit für das lange prognostizierte Potential der Kohlenstoffnanoröhren in (opto-)elektronischen Vorrichtungen in näherer Zukunft ermöglichen. KW - Kohlenstoff-Nanoröhre KW - Carbon Nanotube KW - Evaporation-Induced Self-Assembly KW - thin film KW - verdunstungsinduzierter Selbstanordnung KW - dünner Filme KW - Dünne Schicht KW - Selbstorganisation KW - Verdunstung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123407 ER - TY - JOUR A1 - Fiedler, Sebastian A1 - El-Kareh, Lydia A1 - Eremeev, Sergey V. A1 - Tereshchenko, Oleg E. A1 - Seibel, Christoph A1 - Lutz, Peter A1 - Kokh, Konstantin A. A1 - Chulkov, Evgueni V. A1 - Kuznetsova, Tatyana V. A1 - Grebennikov, Vladimir I. A1 - Bentmann, Hendrik A1 - Bode, Matthias A1 - Reinert, Friedrich T1 - Defect and structural imperfection effects on the electronic properties of BiTeI surfaces JF - New Journal of Physics N2 - The surface electronic structure of the narrow-gap seminconductor BiTeI exhibits a large Rashba-splitting which strongly depends on the surface termination. Here we report on a detailed investigation of the surface morphology and electronic properties of cleaved BiTeI single crystals by scanning tunneling microscopy, photoelectron spectroscopy (ARPES, XPS), electron diffraction (SPA-LEED) and density functional theory calculations. Our measurements confirm a previously reported coexistence of Te- and I-terminated surface areas originating from bulk stacking faults and find a characteristic length scale of ~100 nm for these areas. We show that the two terminations exhibit distinct types of atomic defects in the surface and subsurface layers. For electronic states resided on the I terminations we observe an energy shift depending on the time after cleavage. This aging effect is successfully mimicked by depositon of Cs adatoms found to accumulate on top of the I terminations. As shown theoretically on a microscopic scale, this preferential adsorbing behaviour results from considerably different energetics and surface diffusion lengths at the two terminations. Our investigations provide insight into the importance of structural imperfections as well as intrinsic and extrinsic defects on the electronic properties of BiTeI surfaces and their temporal stability. KW - electronic structure KW - spin–orbit coupling KW - surface morphology KW - semiconductor surfaces Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-119467 SN - 1367-2630 VL - 16 IS - 075013 ER - TY - JOUR A1 - Brüning, Christoph A1 - Wehner, Johannes A1 - Hausner, Julian A1 - Wenzel, Michael A1 - Engel, Volker T1 - Exciton dynamics in perturbed vibronic molecular aggregates JF - Structural Dynamics N2 - A site specific perturbation of a photo-excited molecular aggregate can lead to a localization of excitonic energy. We investigate this localization dynamics for laser-prepared excited states. Changing the parameters of the electric field significantly influences the exciton localization which offers the possibility for a selective control of this process. This is demonstrated for aggregates possessing a single vibrational degree of freedom per monomer unit. It is shown that the effects identified for the molecular dimer can be generalized to larger aggregates with a high density of vibronic states. KW - absorption spectra KW - excited states KW - polymers KW - excitons KW - wave functions Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-126085 VL - 3 ER - TY - THES A1 - Späth, Florian Leonhard T1 - Präparation und Charakterisierung einwandiger Kohlenstoffnanorohr-Polyfluoren-Komplexe T1 - Preparation and characterization of single-wall carbon nanotube-polyfluorene-complexes N2 - Im Fokus dieser Arbeit standen (6,5)-SWNT-PFO-BPy-Komplexe als Vertreter für polyfluorenstabilisierte, einwandige Kohlenstoffnanoröhren. In einem ersten Projekt wurden präparative Verfahren zur Dispergierung und Abscheidung dieser Proben weiterentwickelt. Es ist gelungen, die Ansatzgröße von 15 mL auf 200 mL hochzuskalieren sowie dünne SWNT-Filme über Rotationsbeschichtung herzustellen. Des Weiteren wurde die lichtinduzierte Dynamik in halbleitenden SWNTs von der ps- bis zur µs-Zeitskala untersucht. Hier wurde ein umfassendes Bild zur Singulett- und Triplett-Exzitonendynamik in halbleitenden Kohlenstoffnanoröhren gezeichnet, welches maßgeblich durch diffusionslimitierte Prozesse geprägt ist. Abschließend wurde eine Methode vorgestellt, mit der sich Informationen zur Struktur von SWNT-Polymer-Komplexen und anderen supramolekularen Systemen gewinnen lassen. Diese basiert auf der Kombination von polarisationswinkelaufgelöster Absorptionsspektroskopie an anisotropen Proben und globaler Datenanalyse. N2 - This work’s focus was set on (6,5)-SWNT-PFO-BPy complexes as representatives for polyfluorene-stabilized single-wall carbon nanotubes. As a first project, preparative methods for dispersion and deposition of these samples were refined. The batch size was successfully scaled up from 15 mL to 200 mL and thin SWNT-films were prepared by spin coating. Furthermore, light-induced dynamics from the ps to the µs time scale were investigated in semiconducting SWNTs. Here, a comprehensive picture of the singlet and triplet exciton dynamics in semiconducting SWNTs was provided, which is significantly affected by diffusion-limited processes. Finally, a method providing information about the structure of SWNT-polymer complexes and other supramolecular system was introduced. It is based on a combination of polarization angle-resolved absorption spectroscopy of anisotropic samples and global data analysis. KW - Kohlenstoff-Nanoröhre KW - Dispergierung KW - Fotophysik KW - Polyfluorene KW - Diffusion KW - Nanorohr-Polymer-Komplexe KW - nanotube-polymer-complexes Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123874 ER - TY - THES A1 - Bergler, Felix T1 - Photolumineszenzbasierte Untersuchung der Struktur und der thermodynamischen Bildungsparameter mizellar stabilisierter (6,5)-Kohlenstoffnanoröhren T1 - Photoluminescence based study on structure and thermodynamic properties of micellarly stabilized (6,5) carbon nanotubes N2 - In dieser Arbeit werden die Wechselwirkungen zwischen der Oberfläche von Kohlenstoffnanoröhren und verschiedenen Dispergierreagenzien anhand der Photolumineszenz (PL) der (6,5)-Nanoröhren untersucht. Um den Einfluss der verschiedenen Reagenzien auf die exzitonischen Eigenschaften und die PL-Emission zu quantifizieren, wurden die Dispergierreagenzien ausgetauscht, die Temperaturabhängigkeit bestimmt und die Konzentration der Reagenzien variiert. Die Dispergierreagenzien eines immobilisierten, SC-stabilisierten (6,5)-SWNT-Ensembles wurden im Mikrofluidikkanal ausgetauscht. Wird der Kanal mit Wasser gespült, verringern sich die PL-Intensität und die Emissionsenergie, da der Wasserfluss die Tensidmoleküle von der Oberfläche entfernt. Beim Austausch einer DOC-Umgebung gegen Wasser nimmt die PL-Intensität ebenfalls ab und die PL-Emissionsenergie verringert sich. Die Austauschexperimente verlaufen reversibel und der instantane Anstieg der Emissionsenergie bei der Tensidadsorption weist auf eine kooperative Anlagerung hin. Deshalb ist anzunehmen, dass sich Tensid-SWNT-Heteromizellen ausbilden. Anschließend werden die Emissionsenergie und die PL-Intensität in verschiedenen Dispergierreagenzien und in Wasser verglichen. Die größte Emissionsenergie und PL-Intensität werden während des Wechsels von einer SDS- zu einer (GT)16-Lösung gemessen. Dies kann auf die lückenlose Bedeckung der SWNT-Oberfläche mit einer heterogenen Schicht aus SDS-Molekülen und (GT)16-Strängen zurückgeführt werden. In reiner SDS-Umgebung emittieren die Nanoröhren Licht mit der zweithöchsten Energie, aber die PL-Intensität liegt unter der in einer SC-Umgebung. Die Emissionsenergie in der SC-Umgebung ist geringer und davon abhängig, ob die SWNTs bereits mit (GT)16-Strängen stabilisiert waren, da dies eine permanente Rotverschiebung der Emissionsenergie in der SC-Umgebung sowie eine verringerte PL-Intensität verursacht. In wässriger Umgebung verringert sich nach erfolgtem (GT)16-Kontakt die PL-Intensität dauerhaft. Danach wurde die Anlagerung von Tensidmolekülen an die (6,5)-SWNT-Oberfläche in Suspensionen mit der Temperatursprungmethode untersucht. Die Temperatur im Mikrofluidikkanal wurde anhand der linearen Abnahme der Emissionsenergie SC- und DOC-stabilisierter SWNTs mit steigender Temperatur bestimmt. Die Suspensionstemperatur ist in den verschiedenen Temperatursprungexperimenten unabhängig von der Messposition im Mikrofluidikkanal und wird durch die absolute Position auf den Peltier-Elementen bestimmt. Zudem stimmen die im Kanal gemessenen Temperaturen für SC- und DOC-stabilisierte (6,5)-SWNTs überein, weshalb in diesem Experiment nicht die erwartete Einstellung eines Gleichgewichts wie in einem Temperatursprungexperiment der Fall, sondern die Momentantemperatur gemessen wird. Die schnelle Gleichgewichtseinstellung zwischen freien und auf der SWNT-Oberfläche adsorbierten Tensidmolekülen beim Temperatursprung zeigt, dass die SC- und DOC-(6,5)-SWNT-Suspensionen thermochrome Farbstoffe sind. Wegen der Temperaturabhängigkeit der Emissionsenergie ist es bei wissenschaftlichen Arbeiten wichtig, neben dem verwendeten Dispergierreagenz auch die Temperatur der SWNT-Suspension anzugeben. Abschließend wurden die kritischen Mizellenkonzentrationen von Tensid-SWNT-Suspensionen in Verdünnungsexperimenten und daraus die thermodynamischen Bildungsparameter der Tensid-SWNT-Heteromizellen ermittelt. In der temperaturabhängigen Analyse der SC-SWNT-Mizellenbildung wird ein konstanter Hill-Koeffizient erhalten, der die Mizellenbildung als positiv kooperativ klassifiziert. Für die Bestimmung der Freien Mizellierungsenthalpie wurden nur die CMCs aus den Verdünnungsexperimenten verwendet, da die Mizellenbildung bei der Aufkonzentration teils kinetisch gehemmt ist. Da die Freie Mizellierungsenthalpie bei allen Temperaturen negativ ist, stabilisiert die Bildung der Heteromizellen das System. Die Triebkraft für die Mizellenbildung ist über 322 K die Enthalpie, während unterhalb von 316 K der Entropiegewinn dominiert. Die Verdünnung einer DOC-SWNT-Suspension zeigt keine Änderung der Emissionsenergie, obwohl dabei sowohl die primäre als auch die sekundäre CMC von DOC unterschritten werden. Zuletzt wurden die Verdünnungsexperimente mit einer SDS-SWNT-Suspension durchgeführt und die thermodynamischen Parameter der Mizellenbildung bestimmt. Da auf die Auflösung der Mizellenstruktur direkt die Aggregation der SWNTs folgt, wurde für die Ermittlung der CMC näherungsweise die Konzentration am Maximum der Emissionsenergie verwendet. Daraus ergibt sich bei jeder Temperatur eine negative Freie Mizellierungsenthalpie, deren Beiträge analog zu SC bei kleineren Temperaturen als 323 K entropisch und bei höheren Temperaturen enthalpisch dominiert werden. Somit ermöglichen die Experimente mit SC- und SDS-SWNT-Suspensionen die temperaturabhängige Bestimmung der CMC und damit die Berechnung der Freien Mizellierungsenthalpie sowie der zugehörigen enthalpischen und entropischen Beiträge. N2 - The goal of this thesis is to study the interplay between the SWNT surface and various dispersion agents. The influence of different surfactants on photoluminescence (PL) intensity and emission energy of (6,5)-SWNTs was quantified experimentally. The experiments are separated into three categories: surfactant exchange, determination of the temperature dependency of the PL, and the variaton of surfactant concentration. The dispersion agents of immobilized (6,5)-SWNT ensembles, that are placed in a microfluidic channel, are exchanged. Purging water through the microfluidic channel diminishes the PL intensity and red shifts PL emission energy, as the surfactants either SC or DOC are removed from the SWNT surface. The decrease of the PL intensity and emission energy are also observed if solution is exchanged for water. The surfactant exchange is reversible and the surfactant adsorption shows cooperativity features, which provide evidence for the formation of a surfactant SWNT hetero micelle. Afterwards the PL intensity and PL emission energy of the SWNTs are compared in different dispersing agents and water. The peak values for PL emission energy and PL intensity are measured when exchanging the SDS surfactant for (GT)16 ssDNA. They are caused by a complete coverage of the SWNT surface with a hetero-layer consisting of both species. The second highest PL emission energy is emitted in pure SDS environment followed by SC environment. Regarding the PL intensity the opposite effect is observed. A SC shell yields higher PL intensities than the SDS shell. If the SWNTs had previously been in contact with the (GT)16 ssDNA, the PL intensity was permanently reduced in the SC environment and was accompanied by a permanent red shift of the PL emission energy. The decreased PL intensity renders the water environment indistinguishable from the (GT)16 ssDNA covered SWNTs because they now show the same emission energy and equally low intensities. Subsequently the attachment of surfactant molecules to the surface of colloidally stabilized SWNTs is analyzed by using a temperature jump method. The temperature in the microfluidic channel was measured using the linear relationship between the temperature increase and the decrease of the PL emission energy of SC- and DOC-SWNT solutions. The solution temperature in the temperature jump experiments is independent of the channel position but determined by the absolute position on the Peltier element. In addition, the use of DOC instead of SC as surfactant showed no difference in temperature development, which leads to the conclusion that instead of the equilibration process, the actual liquid temperature is measured since the former is too fast for this experimental approach. The instantaneous equilibration of free and adsorbed surfactant molecules allows to deduce the solution temperature. Thus, SC- and DOC-SWNT solutions can be used as thermochromic dyes. More importantly, the correlation of PL intensity and PL emission energy with temperature emphasizes the importance of providing solution temperatures alongside the dispersing agents and their respective concentrations in scientific studies. Critical micelle concentrations (CMC) of surfactant SWNT solutions are determined in dilution experiments. Afterwards, thermodynamic parameters of the SWNT surfactant heteromicelle formation process are calculated. Hill analysis was used to identify the CMC at the inflection point of the sigmoidal PL emission energy decrease and to determine the Hill coefficient, classifying the micelle formation to be cooperative. Only the CMCs of the dilution experiments were used to calculate the micellar Gibbs energies since the micelle formation in the titration experiments is kinetically hindered at lower temperatures. Since the micellar Gibbs energy is negative at all temperatures, the micelle formation stabilizes the system. At temperatures above 322 K the micellar Gibbs Energy is dominated by the enthalpic contribution while the micelle formation is driven entropically below 316 K. The same experiment was conducted using DOC as dispersion agent, but showed no difference in the PL emission energy passing both the primary and the secondary CMCs of a pure DOC solution. Further experiments feature the dilution of SDS-SWNT solutions and the calculation of the thermodynamic parameters. As the breakup of the micellar structure is directly followed by SWNT aggregation, the CMC is approximately defined as concentration at the PL emission energy maximum. As the micellar Gibbs energy is always negative, the micelle formation provides a stabilization of the SDS-SWNT System, which is driven entropically below 323 K and dominated by enthalpy at higher temperatures. In conclusion, dilution experiments allow for the temperature dependent determination of CMCs and calculation of micellar Gibbs Energy with corresponding entropic and enthalpic contributions. KW - Kohlenstoff-Nanoröhre KW - Tensid KW - Kooperativität KW - Photolumineszenzspektroskopie KW - Strukturaufklärung KW - Mizelle KW - micelle KW - Mikrofluidikchip KW - microfluidic chip KW - Temperaturabhängigkeit KW - temperature dependence KW - SWNT-Ensemble KW - SWNT-ensemble KW - Freie Enthalpie KW - Gibbs Energy Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123586 ER - TY - THES A1 - Macher, Sven T1 - On the Effects of Moisture on Polymer-Based Electrochromic Devices T1 - Über die Auswirkung von Feuchtigkeit auf Polymer-basierte Elektrochrome Elemente N2 - The present work builds on a conjugated electrochromic polymer with a highly transmissive and colorless bright state and its application in electrochromic devices. The main body of this work focuses on the investigation of the influence of moisture on electrochromic devices and solutions to overcome possible degradation of these devices due to moisture ingress. Firstly, a series of EDOT derivatives with a terminal double bond in the lateral sidechain to potentially achieve a highly transmissive and fully colorless bright state was investigated. All of the EDOT derivatives were electrochemically polymerized and characterized by means of (in-situ) spectroelectrochemistry. The results highlight the dramatic influence of the terminal double bond on the improved visible light transmittance and color neutrality in the bright state. After detailed evaluation and comparison, the best performing compound, which contains a hexenyl sidechain (PEDOT-EthC6), was scaled-up by changing the deposition technique from an electrochemical to a chemical in-situ polymerization process on a R2R-pilot line in an industrially relevant environment. The R2R-processed PEDOTEthC6 half-cells were characterized in detail and provide enhanced electrochromic properties in terms of visible light transmittance and color neutrality in the bright state as well as short response times, improved contrast ratio, coloration efficiency and cycling stability (10 000 cycles).[21] In a second step, the novel PEDOT-EthC6 electrochromic polymer was combined with a Prussian Blue counter electrode and a solid polymer electrolyte to form an all-solid-sate ECDs based on complementary switching electrodes and PET-ITO as flexible substrates. The fabricated ECDs were optically and spectroelectrochemically characterized. Excellent functionality of the S2S-processed flexible ECDs was maintained throughout 10 000 switching cycles under laboratory conditions. The ECDs offer enhanced electrochromic properties in terms of visible light transmittance change and color neutrality in the bright state as well as contrast ratio, coloration efficiency, cycling stability and fast response times. Furthermore, the final device assembly was transferred from a S2S-process to a continuous R2R-lamination process.[238] In a third step, the PEDOT-EthC6/PB-based ECDs were submitted to conscious environmental aging tests. The emphasis of the research presented in this work, was mainly put at the influence of moisture and possible failure mechanisms regarding the PEDOT-EthC6/PB based ECDs. An intense brown coloration of the electrodes was observed while cycling the ECDs in humid atmospheres (90% rH) as a major degradation phenomenon. The brown coloration and a thereby accompanied loss of conductivity of the PET-ITO substrates was related to significant degradation of the ITO layers, inserted as the conductive layers in the flexible ECDs. A dissolution of the ITO thin films and formation of metallic indium particles on the surface of the ITO layers was observed that harmed the cycling stability enormously. The conductive layers of the aged ECDs were investigated by XRD, UV-Vis, SEM and spectroelectrochemical measurements and validated the supposed irreversible reduction of the ITO layers.[279] In the absence of reasonable alternatives to PET-ITO for flexible (R2R-processed) ECDs, it is also important to investigate measures to avoid the degradation of ECDs. This is primarily associated with the avoidance of appropriate electrode potentials necessary for ITO reduction in humid atmospheres. As an intrinsic action point, the electrode potentials were investigated via electrochemical measurements in a three-electrode setup of an all-solid-state ECD. Extensive knowledge on the electrode potentials allowed the voltage-induced degradation of the ITO in flexible ECDs to be avoided through the implementation of an unbalanced electrode configuration (charge density ratio of working and counter electrode). It was possible to narrow the overall operational voltage window to an extent in which irreversible ITO reduction no longer occurs. The unbalanced electrode configuration lead to an improved cycling stability without harming other characteristics such as response time and light transmittance change and allows ECD operation in the presence of humidity.[279] The avoidance of the mentioned degradation phenomena is further associated with appropriate sealing methods and materials as well as appropriate electrode and device fabrication processes. Since a variety of sealing materials is commercially available, due to the commercial launch of organic photovoltaic (OPV) and light emitting diodes (OLEDs), the focus in the present work was put to water-free electrode fabrication. As an extrinsic action point, a novel preparation method of a nanoscale PEDOT-EthC6 dispersion based on organic solvents is presented here in a final step. The water-free processing method gives access to straightforward printing and coating processes on flexible PET-ITO substrates and thus represents a promising and simplified alternative to the established PEDOT:PSS. The resulting nano-PEDOT-EthC6 thin films exhibit enhanced color neutrality and transmissivity in the bright state and are comparable to the properties of the in-situ polymerized PEDOT-EthC6 thin films.[280] N2 - Die vorliegende Arbeit beruht auf einem konjugierten elektrochromen Polymer mit hochtransmissivem und farblosem Hellzustand sowie dessen Anwendung in elektrochromen Elementen. Der Hauptteil die-ser Arbeit konzentriert sich auf den Einfluss von Feuchtigkeit auf elektrochrome Elemente sowie Lösun-gen, um einer möglichen Degradation dieser Systeme aufgrund der Einwirkung von Feuchtigkeit entge-genzuwirken. In einem ersten Schritt wurde eine Reihe von EDOT-Derivaten mit terminalen Doppelbindung in einer lateralen Seitenkette untersucht, um einen hochtransmissiven und vollständig farblosen Hellzustand zu erreichen. Alle EDOT-Derivate wurden elektrochemisch polymerisiert und mittels (in-situ) spektroelekt-rochemischer Messungen charakterisiert. Die Ergebnisse unterstreichen den dramatischen Einfluss der terminalen Doppelbindung auf die verbesserte Transmission und Farbneutralität im Hellzustand. Nach einer detaillierten Bewertung und entsprechendem Vergleich wurden die Dünnschichten der Verbin-dung mit den besten Eigenschaften, welche eine Hexenylseitenkette (PEDOT-EthC6) enthält, hochska-liert. Dazu wurde die elektrochemische Abscheidung durch einen chemischen in-situ-Polymerisationsprozess ersetzt. Dies ermöglicht die Abscheidung elektrochromer Dünnschichten im großen Maßstab auf einer R2R-Beschichtungsanlage. Die mittels R2RBeschichtung abgeschiedenen PE-DOT-EthC6-Dünnschichten wurden daraufhin detailliert charakterisiert und zeigen verbesserte elektro-chrome Eigenschaften hinsichtlich visueller Transmission und Farbneutralität im Hellzustand, kurze Schaltzeiten, ein verbessertes Kontrastverhältnis sowie verbesserte Färbeeffizienz und Zyklenstabilität (10 000 Zyklen).[21] Im zweiten Schritt wurden PEDOT-EthC6-Halbzellen mit Preußisch Blau-Gegenelektroden und einem festen Polymerelektrolyten kombiniert und ein Festkörper- ECD auf Basis koplementär-färbender Elekt-roden und flexiblen PET-ITO-Substraten realisiert. Die hergestellten ECDs wurden optisch und (spektro-)elektrochemisch charakterisiert. Die Funktionalität der S2S-assemblierten flexiblen ECDs wurde über 10 000 Schaltzyklen unter Laborbedingungen getestet. Die ECDs bieten verbesserte elektrochrome Eigenschaften hinsichtlich der visuellen Transmission und Farbneutralität im Hellzustand sowie des Kon-trastverhältnisses, der Färbeeffizienz, Zyklenstabilität und Schaltzeit. Darüber hinaus wurde die S2S-Laminierung der ECDs in einen kontinuierlichen R2R-Laminierprozess übertragen.[238] Dann wurden die PEDOT-EthC6/PB-basierten ECDs kontrollierten Alterungstests unterzogen. Der Schwerpunkt dieser Arbeit lag hauptsächlich auf dem Einfluss von Feuchtigkeit und den daraus resultie-renden Degradationsmechanismen des PEDOT-EthC6/PB-Systems. Während die ECDs in feuchter At-mosphäre (90 % rH) zyklisiert wurden, konnte eine intensive Braunfärbung der Elektroden beobachtet werden. Die braune Färbung und ein damit einhergehender Verlust der Leitfähigkeit wurde auf eine signifikante Degradation der ITO-Schichten zurückgeführt, die als leitfähige Schichten in den flexiblen ECDs Verwendung fanden. Die Auflösung der ITO-Dünnschichten sowie die Bildung von metallischen Indiumpartikeln auf der Oberfläche der ITO-Schichten wurde beobachtet und als Ursache für die ver-minderte Zyklenstabilität herangezogen. Die leitfähigen Schichten der gealterten ECDs wurden durch XRD-, UV-Vis-, REM- und (spektro-) elektrochemische Messungen untersucht und die vermutete irre-versible Reduktion der ITO- Schichten bestätigt.[279] Mangels Alternativen zu PET-ITO für flexible (R2R-prozessierte) ECDs ist es wichtig, Maßnahmen zur Vermeidung der Degradation von ECDs zu untersuchen. Dies ist in erster Linie mit der Vermeidung ge-eigneter Elektrodenpotentiale verbunden, die für die Reduktion von ITO in feuchter Atmosphäre erfor-derlich sind. Als intrinsische Maßnahme wurden die Elektrodenpotentiale durch elektrochemische Mes-sungen in einem Drei-Elektroden-Aufbau eines Festkörper-ECD untersucht. Aufgrund der umfassende Kenntnis der Elektrodenpotentiale konnte die spannungsinduzierte Degradation der enthaltenen ITO-Schichten durch die Implementierung einer unbalancierten Elektrodenkonfiguration (Ladungsdichte-verhältnis von Arbeits- und Gegenelektrode) vermieden werden. Es war dadurch möglich, das gesamte Spannungsfenster zum Betrieb des ECD so weit einzuschränken, dass keine irreversible ITO-Reduktion mehr auftrat. Die unbalancierte Elektrodenkonfiguration führt zu einer verbesserten Zyklenstabilität, ohne andere Eigenschaften wie Schaltzeit oder visuellen Transmissionshub zu beeinträchtigen und er-möglicht daher den Betrieb von ECDs auch in feuchter Atmosphäre.[279] Die Vermeidung der genannten Degradationsphänomene ist ferner mit geeigneten Versiegelungsver-fahren und -materialien sowie geeigneten Elektroden- und Assemblierungsverfahren möglich. Da auf-grund der kommerziellen Einführung von organischer Photovoltaik (OPV) und organischer Leuchtdio-den (OLEDs) eine Vielzahl von Versiegelungsmaterialien kommerziell erhältlich ist, lag der Schwerpunkt der vorliegenden Arbeit auf der Herstellung wasserfreier Elektroden. Als extrinsische Maßnahme wurde in einem letzten Schritt eine neuartige Herstellungsmethode für eine nanoskaligen PEDOT-EthC6-Dispersion auf Basis organischer Lösungsmittel entwickelt. Die wasserfreie Verarbeitungsmethode er-möglicht einfache Druck- und Beschichtungsprozesse auf flexiblen PET-ITO-Substraten und stellt somit eine vielversprechende und vereinfachte Alternative zu etabliertem PEDOT:PSS dar. Die resultierenden PEDOT-EthC6-Schichten zeigen im Hellzustand ebenfalls eine verbesserte Farbneutralität sowie visuelle Transmission und sind vergleichbar mit den Eigenschaften der in-situ-polymerisierten PEDOT-EthC6-Schichten.[280] KW - Elektrochromie KW - conjugated electrochromic polymers KW - electrochromic device KW - Elektrochemie KW - Polymere Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-242407 ER - TY - THES A1 - Müller, Stefan T1 - Coherent Multiple-Quantum Multidimensional Fluorescence Spectroscopy T1 - Kohärente multidimensionale Multiquanten-Fluoreszenzspektroskopie N2 - This thesis describes novel concepts for the measurement of the static and dynamic properties of the electronic structure of molecules and nanocrystals in the liquid phase by means of coherent fluorescence-detected spectroscopy in two and three frequency dimensions. These concepts are based on the systematic variation ("phase cycling") of a sequence of multiple time-delayed femtosecond excitation pulses in order to decode a multitude of novel nonlinear signals from the resulting phase-dependent fluorescence signal. These signals represent any permutation of correlations between zero-, one-, two-, and three-quantum coherences. To this end, two new phase-cycling schemes have been developed which can simultaneously resolve and discriminate several nonlinear signals of sixth order, including those of the fourth order of nonlinearity. By means of the sixth-order signals recorded in this work, static properties of highly excited electronic states in molecules such as their energies, transition dipole moments, and relative displacement of electronic potential surfaces, as well as dynamic properties in terms of their relaxation kinetics, can be ascertained. Furthermore, it was shown that these signals are suitable for the characterization of exciton-exciton correlations in colloidal quantum dots and for the measurement of ultrafast exciton-exciton annihilation in molecular aggregates. The experiments performed in this thesis mark an important step towards the complete characterization of the nonlinear response of quantum systems. In view of this, the concept of fluorescence-detected multiple-quantum coherence multidimensional spectroscopy introduced here offers a unified, systematic approach. In virtue of the technical advantages such as the use of a single excitation beam and the absence of nonresonant contributions, the measurement protocols developed here can be directly transferred to other incoherent observables and to sample systems in other states of matter. Furthermore, the approaches presented here can be systematically extended to higher frequency dimensions and higher orders of nonlinearity. N2 - Diese Arbeit beschreibt neuartige Konzepte zur Messung der statischen und dynamischen Eigenschaften der elektronischen Stuktur von Molekülen und Nanokristallen in der flüssigen Phase mittels kohärenter Fluoreszenz-detektierter Spektroskopie in zwei und drei Frequenzdimensionen. Diese Konzepte beruhen auf der systematischen Phasenvariation ("Phase Cycling") einer Sequenz mehrerer zeitverzögerter Femtosekunden-Anregepulse, um aus dem resultierenden phasenabhängigen Fluoreszenzsignal eine Vielzahl von neuartigen nichtlinearen Signalen zu dekodieren. Diese Signale stellen jegliche Permutationen von Korrelationen zwischen Null-, Ein-, Zwei- und Drei-Quantenkohärenzen dar. Hierzu wurden zwei neue Phase-Cycling Schemata entwickelt, welche gleichzeitig mehrere nichtlineare Signale der sechsten Ordnung auflösen und voneinander unterscheiden können, inklusive der Signale der vierten nichtlinearen Ordnung. Mit den in dieser Arbeit aufgenommenen Signalen der sechsten Ordnung können statische Eigenschaften hoch-angeregter elektronischer Zustände in Molekülen wie deren Energien, Übergangsdipolmomente, relative Verschiebung elektronischer Potentialflächen zueinander, sowie dynamische Eigenschaften in Bezug auf deren Relaxationskinetik ermittelt werden. Ferner wurde gezeigt, dass diese Signale zur Charakterisierung von Exziton-Exziton-Korrelationen in kolloidalen Quantenpunkten sowie zur Messung ultraschneller Exziton-Exziton-Annihilierung in molekularen Aggregaten geeignet sind. Die Experimente dieser Arbeit markieren einen wichtigen Schritt in Richtung der vollständigen Charakterisierung der nichtlinearen Antwort von Quantensystemen. Das hier eingeführte Konzept der Fluoreszenz-detektierten multidimensionalen Multiquantenkohärenz-Spektroskopie bietet hierfür einen vereinheitlichten, systematischen Ansatz. In Hinblick auf technische Vorteile wie der Verwendung eines einzigen Anregestrahls und der Abwesenheit von nichtresonanten Beiträgen lassen sich die hier entwickelten Messprotokolle direkt auf andere inkohärente Observablen und auf Probesysteme in anderen Aggregatszuständen übertragen. Ferner lassen sich die vorgestellten Ansätze systematisch auf höhere Frequenzdimensionen und nichtlineare Ordnungen erweitern. KW - Coherent Multidimensional Spectroscopy KW - Ultrakurzzeitspektroskopie KW - Angeregter Zustand KW - Kohärente Anregung KW - Electronic spectroscopy KW - Time-resolved spectroscopy KW - Laser pulse shaping KW - Phase cycling KW - High-excited electronic states KW - Elektronische Spektroskopie KW - Zeitaufgelöste Spektroskopie KW - Laserimpulsformung KW - Phasenmodulation KW - Hochangeregte elektronische Zustände Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-244113 ER - TY - THES A1 - Keß, Martin T1 - Wellenfunktionsbasierte Beschreibung der zweidimensionalen vibronischen Spektroskopie von molekularen Aggregaten und Ladungstransfersystemen T1 - Wave-function based description of the two-dimensional vibronic spectroscopy of molecular aggregates and charge-transfer systems N2 - Diese Arbeit befasst sich mit zeitaufgelösten Prozessen in molekularen Systemen. Dabei wurde sowohl die Wellenpaketdynamik nach Photoanregung betrachtet als auch spektrale Eigenschaften mittels Absorptions- und zweidimensionaler Spektroskopie untersucht. Zunächst widmet sich die Arbeit der Wellenpaket- und Populationsdynamik in zwei diabatischen, gekoppelten Zuständen. Nach impulsiver Anregung aus dem zu Beginn besetzten Zustand treten in der Populationsdynamik zwei deutlich verschiedene Oszillationen auf. Der langsamer variierende Populationstransfer besitzt die Periodendauer der Vibrationsbewegung und ist auf einen Wechsel der Zustände beim Durchlaufen des Wellenpakets durch die Kreuzungsregion der diabatischen Potentiale zurückzuführen. Die ultraschnelle Komponente mit einer Periodendauer von etwa 4 fs lässt sich als eine Art Rabi-Oszillation beschreiben, die durch die (zeitunabhängige) Kopplung hervorgerufen wird. Sie wurde mit Hilfe von analytischen Berechnungen ausführlich charakterisiert. Damit dieser Prozess auftreten kann müssen mehrere Bedingungen erfüllt werden: Das Wellenpaket muss über die Dauer der Oszillationen annähernd örtlich lokalisiert bleiben; dies ist an den Umkehrpunkten der Wellenpaketsbewegung der Fall. Die Amplitude der Oszillationen in den Populationen ist proportional zum Verhältnis der Kopplung zum Energieabstand der Zustände. Deshalb muss an den stationären Stellen die Kopplung groß im Vergleich zum Energieabstand sein. Die Amplitude der Oszillationen hängt außerdem von dem Populationsverhältnis und den Phasen der Komponenten des Wellenpakets in den beiden Zuständen ab. Die ultraschnellen Oszillationen bleiben auch in mehrdimensionalen Systemen mit unterschiedlichen Vibrationsfrequenzen je Freiheitsgrad erhalten. Das gleiche Modell wurde benutzt, um Ladungstransferprozesse mittels linearer und 2D-Spektroskopie zu untersuchen. Eine Kopplung an die Umgebung wurde, aufbauend auf einer Quanten-Master-Gleichung in Markov-Näherung, wellenfunktionsbasiert mittels eines Quantum-Jump-Algorithmus mit expliziter Dephasierung beschrieben. Dabei findet mit vorher definierten Wahrscheinlichkeiten zu jedem Zeitschritt einer von drei stochastischen Prozessen statt. Neben kohärenter Propagation können Sprünge in einen anderen Eigenzustand des Systems und Dephasierungen auftreten. Zwei Dissipationsparameter spielen dabei eine Rolle. Dies ist zum einen die Stärke der System-Bad-Kopplung, welche die Gesamtrate der Energierelaxation beschreibt. Weiterhin beeinflusst die Dephasierungskonstante den Verlust kohärenter Phasen ohne Energieänderung. Fallenzustände wurden identifiziert, die durch sehr geringe Sprungraten in niedrigere Zustände charakterisiert sind. Die Langlebigkeit kann durch die Form der Eigenfunktionen erklärt werden, die eine deutlich andere Wahrscheinlichkeitsverteilung als die der Nicht-Fallenzustände besitzen. Dadurch werden die in die Sprungraten eingehenden Matrixelemente klein. Das Absorptionsspektrum zeigt Peaks an der Stelle der Fallenzustände, da nur die Eigenfunktionen der Fallenzustände große Franck-Condon-Faktoren mit der Anfangswellenfunktion besitzen. Verschiedene Kombinationen der Dissipationsparameter führen zu Änderungen der relativen Peakintensitäten und der Peakbreiten. Die 2D-Spektren des Ladungstransfersystems werden störungstheoretisch über die Polarisation dritter Ordnung berechnet. Sie zeigen viele eng nebeneinander liegende Peaks in einer schachbrettmusterförmigen Anordnung, die sich auf Übergänge unter Mitwirkung der Fallenzustände zurückführen lassen. Höhere System-Bad-Kopplungen führen aufgrund der effizienten Energiedissipation zu einer Verschiebung zu kleineren Energien. Peaks, die mit schneller zerfallenden Fallenzuständen korrespondieren, bleichen schneller aus. Höhere Dephasierungskonstanten resultieren in verbreiterten Peaks. Um den Einfluss der Dissipation genauer zu charakterisieren, wurden gefilterte 2D-Spektren betrachtet. Dazu wurden Ausschnitte der Polarisation dritter Ordnung zu verschiedenen Zeiten fouriertransformiert. Längere Zeiten führen zu einer effektiveren Energierelaxation entlang der entsprechenden Zeitvariablen. Die Entvölkerung der höher liegenden Zustände lässt sich somit zeit- und energieaufgelöst betrachten. Weiterhin wurde gezeigt, dass sich der Zerfall eines einzelnen Peaks mit dem Populationsabfall des damit korrespondierenden Eigenzustandes in Einklang bringen lässt, obwohl die Zuordnung der Peaks im 2D-Spektrum zu Übergängen zwischen definierten Eigenzuständen nicht eindeutig ist. Mit dem benutzten eindimensionalen Modell können auch Ladungstransferprozesse in organischen gemischtvalenten Verbindungen beschrieben werden. Es wurde die Frage untersucht, welche Prozesse nach einem optisch induzierten Energietransfer in solchen Systemen ablaufen. Experimentelle Daten (aufgenommen im Arbeitskreis von Prof. Lambert) deuten auf eine schnelle interne Konversion (IC) gefolgt von Thermalisierung hin. Um dies theoretisch zu überprüfen, wurden Absorptionsspektren bei verschiedenen Temperaturen berechnet und mit den gemessenen transienten Spektren verglichen. Es findet sich, abhängig von der Stärke der elektronischen Kopplung, eine sehr gute bis gute Übereinstimmung, was die Annahme eines schnellen ICs stützt. Im letzten Teil der Arbeit wurden vibronische 2D-Spektren von molekularen Aggregaten betrachtet. Dazu wurde die zeitabhängige Schrödingergleichung für ein Monomer-, Dimer- und Trimersystem mit der Multi-Configuration Time-Dependent Hartree-Methode gelöst und die Polarisation nicht-störungstheoretisch berechnet. Der Hamiltonoperator des Trimers umfasst hierbei sieben gekoppelte elektronische Zustände und drei bzw. sechs Vibrationsfreiheitsgrade. Der betrachtete Photonenecho-Beitrag der Polarisation wurde mittels phasencodierter Laserpulse extrahiert. Die resultierenden Spektren sind geometrieabhängig, ein Winkel zwischen den Übergangsdipolmomenten der Monomere von 0° (180°) resultiert in einem H-Aggregat (J-Aggregat). Die Lage und Intensität der Peaks im rein elektronischen Trimer wurde analytisch erläutert. Die Spektren unter Einbeziehung der Vibration zeigen eine ausgeprägte vibronische Struktur. Es wurde gezeigt, wie die Spektren für höhere Aggregationsgrade durch die höhere Dichte an vibronischen Zuständen komplexer werden. Im J-Aggregat ist mit zunehmender Aggregation eine stärkere Rotverschiebung zu sehen. Das Spektrum des H-Aggregats zeigt eine im Vergleich zum J-Aggregat kompliziertere Struktur. Die Verwendung zweier Vibrationsfreiheitsgrade je Monomer führt zu Spektren mit überlappenden Peaks und einer zusätzlichen vibronischen Progression. Der Vergleich von Spektren verschiedener Mischungen von Monomer, Dimer und Trimer, entsprechend einem von Temperatur und Konzentration abhängigen Aggregationsgrad, zeigt den Einfluss dieser experimentellen Faktoren. Schließlich wurden mögliche Ansätze aufgezeigt, anhand der Spektren auf den Aggregationsgrad zu schließen. N2 - This work studies time-resolved phenomena in molecular systems. Both, the wave-packet dynamics after photoexcitation and the spectral properties, examined via absorption and two-dimensional spectroscopy, are regarded. First, the wave-packet and population dynamics in two coupled diabatic states are considered. After an impulsive excitation from the initially populated state, two significantly different oscillatory features are visible in the population dynamics. The slower varying population transfer follows the oscillation period of the vibrational motion and results from the diabatic transition when the wave-packet passes through the crossing region of the respective potentials. The ultrafast oscillatory component with an oscillation period of about 4 fs can be described as a Rabi-like oscillation induced by the (time-independent) coupling. It is characterized in detail via analytic calculations. For this contribution to be visible, some conditions have to be met: The wave-packet needs to be spatially localized during the duration of the oscillations. This is the case at the classical turning points of the wave-packet motion. The oscillations' amplitude seen in the populations is proportional to the ratio between the coupling and the energetic gap between the involved states. This means that the coupling needs to be large compared to the energy separation at the points where the wave-packet is stationary. Additionally, the amplitude depends on the relative populations and the phases of the wave-packet components in the two states. The ultrafast oscillations persist in systems of higher dimensionality with different vibrational frequencies in each degree of freedom. The same model is used to examine charge-transfer processes via linear and 2D spectroscopy. A coupling to the environment is described by a quantum-jump algorithm with explicit treatment of dephasing, based on a quantum-master equation in Markov approximation. At each time step, one of three stochastic processes takes place with a pre-defined probability. Besides coherent propagation, jumps into other eigenstates of the system and dephasing occur. Two dissipation parameters are of relevance. The first is the value of the system-bath coupling which influences the overall energy relaxation rate while, additionally, the dephasing constant causes a loss of phase coherence without energy relaxation. Trap states are identified, which are characterized by very low jump rates to lower states. Their slow decay can be explained by the shape of their respective eigenfunctions, which possess a vastly different probability density than eigenstates of the non-trap states. This results in small matrix elements entering in the equations for the jump rates. The absorption spectrum exhibits peaks at the energies of the trap states because only the trap states' eigenfunctions lead to large Franck-Condon factors with the initial wave function. Different values of the dissipation parameters lead to changes in the relative peak intensities and peak widths. The 2D spectra of the charge-transfer system are calculated via the third-order polarization. They show many close lying peaks in a chessboard like distribution. The peaks can be traced back to transitions involving the trap states. Higher values of the system-bath coupling lead to a shift to lower energies because of the more efficient energy dissipation. Peaks corresponding to faster decaying trap states show more substantial loss in intensity as compared to other peaks. Higher values of the dephasing constant result in broader peaks. To better characterize the influence of the dissipation, we consider filtered 2D spectra. Therefore, cuts of the third-order polarization at different times are Fourier-transformed separately. Cuts at later times map the more effective energy relaxation along the respective time-variable. Via this technique the de-population of higher lying states can be monitored both in time and energy. Additionally it is shown that the decay of a specific peak can be related to the population decay of the corresponding eigenstate, even though the assignment of peaks in the 2D spectrum to transitions between eigenstates is not unique. The one-dimensional model can also be used to examine charge-transfer processes in organic mixed-valence compounds. Here, the question is, which processes take place after an optically induced energy transfer. Transient absorption spectra, recorded in the group of Prof. Lambert, hint to a fast internal conversion (IC) followed by thermalisation. To check this theoretically, absorption spectra at different temperatures are calculated and compared to the measured transient spectra. Depending on the value of the electronic coupling element, a very good to good agreement is found, supporting the existence of a fast IC process. The last part of this work considers vibronic 2D spectra of molecular aggregates. Therefore, the time-dependent Schrödinger equation is solved with the Multi-Dimentional Time-Dependent Hartree-method for a monomer, dimer and trimer system, and the polarization is calculated via a non-perturbative scheme. The trimer Hamiltonian consists of seven coupled electronic states and three or six vibrational degrees of freedom, respectively. The photon-echo contribution of the polarization is extracted via phase-coded laser pulses. This results in geometry dependent spectra: An angle between the monomer transition dipole moments of 0° (180°) leads to an H-aggregate (J-aggregate). In the purely electronic system, the location and intensities of the peaks are explained analytically. The spectra including vibrations show a rich vibronic structure. It is shown that spectra for higher degrees of aggregation are more complex because of the higher density of vibronic states. The J-aggregate is stronger red shifted in larger aggregates. The spectrum of the H-aggregate possesses a more complicated structure as compared to the J-aggregate spectrum. The inclusion of a second vibrational degree of freedom into each monomer results in spectra with overlapping peaks and an additional vibrational progression. Spectra of different mixtures of monomer, dimer and trimer are compared. Because the level of aggregation depends on temperature and concentration, this documents the influence of the experimental conditions on the 2D spectra. Finally, possible approaches to infer the degree of aggregation from the spectra are discussed. KW - Quantenmechanik KW - Ladungstransfer KW - Quantendynamik KW - Zweidimensionale elektronische Spektroskopie KW - Aggregat KW - Spektroskopie KW - Dimension 2 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136458 ER - TY - THES A1 - Koch, Federico Juan T1 - Structure-Dependent Ultrafast Relaxation Dynamics in Multichromophoric Systems T1 - Strukturabhängigkeit ultraschneller Relaxationsdynamik in multichromophoren Systemen N2 - Time-resolved spectroscopy allows for analyzing light-induced energy conversion and chromophore–chromophore interactions in molecular systems, which is a prerequisite in the design of new materials and for improving the efficiency of opto-electronic devices. To elucidate photo-induced dynamics of complex molecular systems, transient absorption (TA) and coherent two-dimensional (2D) spectroscopy were employed and combined with additional experimental techniques, theoretical approaches, and simulation models in this work. A systematic series of merocyanines, synthetically varied in the number of chromophores and subsitution pattern, attached to a benzene unit was investigated in cooperation with the group of Prof. Dr. Frank Würthner at the University of Würzburg. The global analysis of several TA experiments, and additional coherent 2D spectroscopy experiments, provided the basis to elaborate a relaxation scheme which was applicable for all merocyanine systems under investigation. This relaxation scheme is based on a double minimum on the excited-state potential energy surface. One of these minima is assigned to an intramolecular charge-transfer state which is stabilized in the bis- and tris-chromophoric dyes by chromphore–chromophore interactions, resulting in an increase in excited-state lifetime. Electro-optical absorption and density functional theory (DFT) calculations revealed a preferential chromophore orientation which compensates most of the dipole moment of the individual chromophores. Based on this structural assignment the conformationdependent exciton energy splitting was calculated. The linear absorption spectra of the multi-chromophoric merocyanines could be described by a combination of monomeric and excitonic spectra. Subsequently, a structurally complex polymeric squaraine dye was studied in collaboration with the research groups of Prof. Dr. Christoph Lambert and Prof. Dr. Roland Mitric at the University of Würzburg. This polymer consists of a superposition of zigzag and helix structures depending on the solvent. High-level DFT calculations confirmed the previous assignment that zigzag and helix structures can be treated as J- and H-aggregates, respectively. TA experiments revealed that in dependence on the solvent as well as the excitation energy, ultrafast energy transfer within the squaraine polymer proceeds from initially excited helix segments to zigzag segments or vice versa. Additionally, 2D spectroscopy confirmed the observed sub-picosecond dynamics. In contrast to other conjugated polymers such as MEH-PPV, which is investigated in the last chapter, ultrafast energy transfer in squaraine polymers is based on the matching of the density of states between donor and acceptor segments due to the small reorganization energy in cyanine-like chromophores. Finally, the photo-induced dynamics of the aggregated phase of the conjugated polymer MEH-PPV was investigated in cooperation with the group of Prof. Dr. Anna Köhler at the University of Bayreuth. Our collaborators had previously described the aggregation of MEH-PPV upon cooling by the formation of so-called HJ-aggregates based on exciton theory. By TA measurements and by making use of an affiliated band analysis distinct relaxation processes in the excited state and to the ground state were discriminated. By employing 2D spectroscopy the energy transfer between different conjugated segments within the aggregated polymer was resolved. The initial exciton relaxation within the aggregated phase indicates a low exciton mobility, in contrast to the subsequent energy transfer between different chromophores within several picoseconds. This work contributes by its systematic study of structure-dependent relaxation dynamics to the basic understanding of the structure-function relationship within complex molecular systems. The investigated molecular classes display a high potential to increase efficiencies of opto-electronic devices, e.g., organic solar cells, by the selective choice of the molecular morphology. N2 - Zeitaufgelöste Spektroskopie ermöglicht die Untersuchung lichtinduzierter Energietransferprozesse und molekularer Wechselwirkungen. Derartige Ergebnisse bilden wiederum die Grundlage für die Entwicklung von Synthesestrategien für neuartige Materialien sowie für effizientere optoelektronische Anwendungen. Um die lichtinduzierte Dynamik komplexer molekularer Systeme aufzuklären, wurden die Techniken der transienten Absorption (TA) und der kohärenten zweidimensionalen (2D) Spektroskopie mit weiteren experimentellen Messungen sowie theoretischen Ansätzen und Simulationen kombiniert. In Kooperation mit der Forschungsgruppe von Prof. Dr. FrankWürthner an der Universität Würzburg wurde eine molekulare Serie von Merocyaninen untersucht, die sich in der Anzahl der Chromophore und dem Substitutionsmuster an einem Benzolring unterscheiden. Eine globale Analyse der TA-Experimente für die verschiedenen Moleküle der Serie sowie weitere kohärente 2D-Spektroskopie-Experimente ermöglichten es, ein Relaxationsmodell zu ermitteln, das für alle untersuchten Merocyaninsysteme anwendbar ist. Dieses Relaxationsmodell basiert auf einem doppelten Minimum in der Potentialfläche des ersten angeregten Zustands. Eines dieser Minima wurde einem intramolekularen Ladungstransferzustand zugeordnet, welcher durch die Wechselwirkung benachbarter Chromophore stabilisiert wird und dadurch einen Anstieg der Lebensdauer des angeregten Zustands bewirkt. Zusätzliche elektrooptische Absorptionsmessungen in Kombination mit Ergebnissen der Dichtefunktionaltheorie offenbarten eine bevorzugte relative Chromophororientierung, die das Dipolmoment eines einzelnen Chromophors weitestgehend kompensiert. Basierend auf dieser Strukturbestimmung wurde eine strukturabhängige Exzitonenaufspaltungsenergie ermittelt und mit der Aufspaltung in den linearen Absorptionsspektren verglichen. Die linearen Absorptionsspektren der multichromophoren Merocyanine können durch eine Kombination von monomerischen und exzitonischen Beiträgen beschrieben werden, was eine gewisse strukturelle Flexibilität erfordert. In einer weiteren Kooperation mit den Gruppen von Prof. Dr. Christoph Lambert und Prof. Dr. Roland Mitric der Universität Würzburg wurde ein strukturell komplexer, polymerer Squarainfarbstoff untersucht. Dieses Polymer besteht aus einer Superposition von Zickzack- und Helixstrukturen, welche lösungsmittelabhängig ist. Rechnungen basierend auf neuesten Methoden der Dichtefunktionaltheorie bestätigten die vorherige Zuordnung, dass Zickzack- und Helixstrukturen als J- und H-Aggregate behandelt werden können. Mittels transienter Absorption konnte ermittelt werden, dass in Abhängigkeit des Lösungsmittels sowie der Anregungsenergie ultraschneller Energietransfer innerhalb des Squarain-Polymers entweder von zunächst angeregten Helix- zu Zickzacksegmenten stattfindet oder von Zickzack- zu Helixsegmenten. Zusätzlich konnte die Subpikosekundendynamik durch die kohärente 2D-Spektroskopie bestätigt werden. Im Gegensatz zu anderen konjugierten Polymeren wie MEH-PPV, welches im letzten Kapitel dieser Arbeit behandelt wird, basiert der ultraschnelle Energietransfer in Squarainpolymeren auf dem energetischen Überlapp der Zustandsdichten von Donor- und Akzeptorsegmenten, welcher auf die geringe Reorganisationsenergie in cyaninähnlichen Farbstoffen beruht. Abschließend wurde die lichtinduzierte Dynamik der aggregierten Phase des konjugierten Polymers MEH-PPV in Kooperation mit der Gruppe von Prof. Dr. Anna Köhler von der Universität Bayreuth untersucht. Unsere Kooperationspartner hatten zuvor die Aggregation von MEH-PPV bei Abkühlung durch die Formation von sogenannten HJ-Aggregaten, welche auf der Exzitonentheorie beruhen, beschrieben. Durch transiente Absorptionsmessungen und einer zugehörigen Bandenanalyse konnte zwischen Relaxationsprozessen im angeregten Zustand und zurück zum Grundzustand unterschieden werden. Die Anwendung der kohärenten 2D-Spektroskopie ermöglichte es, Energietransferprozesse zwischen konjugierten Segmenten des aggregierten Polymers aufzuklären. Die anfängliche Exzitonenrelaxation innerhalb der aggregierten Phase deutet auf eine geringe Mobilität der Exzitonen hin, welche im Gegensatz zu den anschließenden Energietransferprozessen zwischen unterschiedlichen Chromophoren innerhalb einiger Pikosekunden steht. Diese Arbeit trägt durch eine systematische Untersuchung der strukturabhängigen Relaxationsdynamik zum grundlegenden Verständnis des Verhältnisses zwischen Struktur und Funktion von komplexen molekularen Systemen bei. Die untersuchten Molekülklassen weisen dabei ein hohes Potential auf, um durch gezielte Wahl der Morphologie zu einer Steigerung von Effizienzen in optoelektronischen Anwendungen, wie beispielsweise organischen Solarzellen, beizutragen. KW - Femtosekundenspektroskopie KW - Ultrakurzzeitspektroskopie KW - Molekülstruktur KW - Ultrafast Spectroscopy KW - Molecular Structure KW - Transient-Absorption Sectroscopy KW - Coherent two-dimensional Spectroscopy KW - Relaxation Dynamics KW - Polychromophores System KW - Verbindungen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136306 ER - TY - JOUR A1 - Rudolf, P. A1 - Kanal, F. A1 - Gehrig, D. A1 - Niesel, J. A1 - Brixner, T. A1 - Schatzschneider, U. A1 - Nuernberger, P. T1 - Femtosecond mid-infrared study of the aqueous solution photochemistry of a CO-releasing molecule (CORM) JF - EPJ Web of Conferences N2 - Ultraviolet irradiation of CO-releasing molecules (CORMs) in water eventually leads to the loss of several carbon monoxide ligands.We show for an exemplary manganese tricarbonyl CORM that only one ligand is photolyzed off on an ultrafast timescale and that some molecules may undergo geminate recombination. KW - Aqueous Solution Photochemistry KW - Femtosecond Mid-Infrared Study Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129104 VL - 41 ER -