TY - THES A1 - Driewer, Frauke T1 - Teleoperation Interfaces in Human-Robot Teams T1 - Benutzerschnittstellen für Teleoperation in Mensch-Roboter Teams N2 - Diese Arbeit beschäftigt sich mit der Verbesserung von Mensch-Roboter Interaktion in Mensch-Roboter Teams für Teleoperation Szenarien, wie z.B. robotergestützte Feuerwehreinsätze. Hierbei wird ein Konzept und eine Architektur für ein System zur Unterstützung von Teleoperation von Mensch-Roboter Teams vorgestellt. Die Anforderungen an Informationsaustausch und -verarbeitung, insbesondere für die Anwendung Rettungseinsatz, werden ausgearbeitet. Weiterhin wird das Design der Benutzerschnittstellen für Mensch-Roboter Teams dargestellt und Prinzipien für Teleoperation-Systeme und Benutzerschnittstellen erarbeitet. Alle Studien und Ansätze werden in einem Prototypen-System implementiert und in verschiedenen Benutzertests abgesichert. Erweiterungsmöglichkeiten zum Einbinden von 3D Sensordaten und die Darstellung auf Stereovisualisierungssystemen werden gezeigt. N2 - This work deals with teams in teleoperation scenarios, where one human team partner (supervisor) guides and controls multiple remote entities (either robotic or human) and coordinates their tasks. Such a team needs an appropriate infrastructure for sharing information and commands. The robots need to have a level of autonomy, which matches the assigned task. The humans in the team have to be provided with autonomous support, e.g. for information integration. Design and capabilities of the human-robot interfaces will strongly influence the performance of the team as well as the subjective feeling of the human team partners. Here, it is important to elaborate the information demand as well as how information is presented. Such human-robot systems need to allow the supervisor to gain an understanding of what is going on in the remote environment (situation awareness) by providing the necessary information. This includes achieving fast assessment of the robot´s or remote human´s state. Processing, integration and organization of data as well as suitable autonomous functions support decision making and task allocation and help to decrease the workload in this multi-entity teleoperation task. Interaction between humans and robots is improved by a common world model and a responsive system and robots. The remote human profits from a simplified user interface providing exactly the information needed for the actual task at hand. The topic of this thesis is the investigation of such teleoperation interfaces in human-robot teams, especially for high-risk, time-critical, and dangerous tasks. The aim is to provide a suitable human-robot team structure as well as analyze the demands on the user interfaces. On one side, it will be looked on the theoretical background (model, interactions, and information demand). On the other side, real implementations for system, robots, and user interfaces are presented and evaluated as testbeds for the claimed requirements. Rescue operations, more precisely fire-fighting, was chosen as an exemplary application scenario for this work. The challenges in such scenarios are high (highly dynamic environments, high risk, time criticality etc.) and it can be expected that results can be transferred to other applications, which have less strict requirements. The present work contributes to the introduction of human-robot teams in task-oriented scenarios, such as working in high risk domains, e.g. fire-fighting. It covers the theoretical background of the required system, the analysis of related human factors concepts, as well as discussions on implementation. An emphasis is placed on user interfaces, their design, requirements and user testing, as well as on the used techniques (three-dimensional sensor data representation, mixed reality, and user interface design guidelines). Further, the potential integration of 3D sensor data as well as the visualization on stereo visualization systems is introduced. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 1 KW - Robotik KW - Mobiler Roboter KW - Autonomer Roboter KW - Mensch-Maschine-System KW - Mensch-Maschine-Schnittstelle KW - Mixed Reality KW - Mensch-Roboter-Interaktion KW - Situationsbewusstsein KW - Teleoperation KW - Benutzerschnittstelle KW - Rettungsroboter KW - Human-Robot-Interaction KW - Situation Awareness KW - Teleoperation KW - User Interface KW - Search-and-Rescue Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-36351 SN - 978-3-923959-57-0 N1 - Zugl. gedruckte Ausgabe: ISBN: 978-3-923959-54-9 (Paper) ER - TY - THES A1 - Dombrovski, Veaceslav T1 - Software Framework to Support Operations of Nanosatellite Formations T1 - Software Framework für die Unterstützung des Betriebs von Nanosatelliten-Formationen N2 - Since the first CubeSat launch in 2003, the hardware and software complexity of the nanosatellites was continuosly increasing. To keep up with the continuously increasing mission complexity and to retain the primary advantages of a CubeSat mission, a new approach for the overall space and ground software architecture and protocol configuration is elaborated in this work. The aim of this thesis is to propose a uniform software and protocol architecture as a basis for software development, test, simulation and operation of multiple pico-/nanosatellites based on ultra-low power components. In contrast to single-CubeSat missions, current and upcoming nanosatellite formation missions require faster and more straightforward development, pre-flight testing and calibration procedures as well as simultaneous operation of multiple satellites. A dynamic and decentral Compass mission network was established in multiple active CubeSat missions, consisting of uniformly accessible nodes. Compass middleware was elaborated to unify the communication and functional interfaces between all involved mission-related software and hardware components. All systems can access each other via dynamic routes to perform service-based M2M communication. With the proposed model-based communication approach, all states, abilities and functionalities of a system are accessed in a uniform way. The Tiny scripting language was designed to allow dynamic code execution on ultra-low power components as a basis for constraint-based in-orbit scheduler and experiment execution. The implemented Compass Operations front-end enables far-reaching monitoring and control capabilities of all ground and space systems. Its integrated constraint-based operations task scheduler allows the recording of complex satellite operations, which are conducted automatically during the overpasses. The outcome of this thesis became an enabling technology for UWE-3, UWE-4 and NetSat CubeSat missions. N2 - Seit dem Launch des ersten CubeSats im Jahr 2003, hat die Komplexität der Nanosatelliten stetig zugenommen. Um mit den wachsenden Anforderungen Schritt zu halten und gleichzeitig nicht auf die Hauptvorteile einer CubeSat Mission zu verzichten, wird eine einheitliche Protokoll- und Softwarearchitektur für den gesamten Weltraum- und Bodensegment vorgeschlagen. Diese Arbeit schlägt eine einheitliche Software- und Protokoll-Architektur vor als Basis für Softwareentwicklung, Tests und Betrieb von mehreren Pico-/Nanosatelliten. Im Gegensatz zu Missionen mit nur einem CubeSat, erfordern künftige Nanosatelliten-Formationen eine schnellere und einfachere Entwicklung, Vorflug-Tests, Kalibrierungsvorgänge sowie die Möglichkeit mehrere Satelliten gleichzeitig zu betreiben. Ein dynamisches und dezentrales Compass Missionsnetzwerk wurde in mehreren CubeSat-Missionen realisiert, bestehend aus einheitlich zugänglichen Knoten. Die Compass-Middleware wurde entwickelt, um sowohl die Kommunikation als auch funktionale Schnittstellen zwischen allen beteiligten Software und Hardware Systemen in einer Mission zu vereinheitlichen: Rechner des Bedienpersonals, Bodenstationen, Mission-Server, Testeinrichtungen, Simulationen und Subsysteme aller Satelliten. Mit dem Ansatz der modellbasierten Kommunikation wird auf alle Zustände und Funktionen eines Systems einheitlich zugegriffen. Die entwickelte Tiny Skriptsprache ermöglicht die Ausführung von dynamischem Code auf energiesparenden Systemen, um so in-orbit Scheduler zu realisieren. Das Compass Operations Front-End bietet zahlreiche grafische Komponenten, mit denen alle Weltraum- und Bodensegment-Systeme einheitlich überwacht, kontrolliert und bedient werden. Der integrierte Betrieb-Scheduler ermöglicht die Aufzeichnung von komplexen Satellitenbetrieb-Aufgaben, die beim Überflug automatisch ausgeführt werden. Die Ergebnisse dieser Arbeit wurden zur Enabling-Technologie für UWE-3, UWE-4 und NetSat Missionen. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 23 KW - Kleinsatellit KW - Softwaresystem KW - Kommunikationsprotokoll KW - Betriebssystem KW - Compiler KW - Satellite formation KW - Distributed computing KW - Compass framework KW - Model based mission realization KW - Model based communication Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-249314 SN - 978-3-945459-38-6 ER - TY - THES A1 - Busch, Stephan T1 - Robust, Flexible and Efficient Design for Miniature Satellite Systems T1 - Moderne Kleinstsatelliten - Zwischen Robustheit, Flexibilität und Effizienz N2 - Small satellites contribute significantly in the rapidly evolving innovation in space engineering, in particular in distributed space systems for global Earth observation and communication services. Significant mass reduction by miniaturization, increased utilization of commercial high-tech components, and in particular standardization are the key drivers for modern miniature space technology. This thesis addresses key fields in research and development on miniature satellite technology regarding efficiency, flexibility, and robustness. Here, these challenges are addressed by the University of Wuerzburg’s advanced pico-satellite bus, realizing a generic modular satellite architecture and standardized interfaces for all subsystems. The modular platform ensures reusability, scalability, and increased testability due to its flexible subsystem interface which allows efficient and compact integration of the entire satellite in a plug-and-play manner. Beside systematic design for testability, a high degree of operational robustness is achieved by the consequent implementation of redundancy of crucial subsystems. This is combined with efficient fault detection, isolation and recovery mechanisms. Thus, the UWE-3 platform, and in particular the on-board data handling system and the electrical power system, offers one of the most efficient pico-satellite architectures launched in recent years and provides a solid basis for future extensions. The in-orbit performance results of the pico-satellite UWE-3 are presented and summarize successful operations since its launch in 2013. Several software extensions and adaptations have been uploaded to UWE-3 increasing its capabilities. Thus, a very flexible platform for in-orbit software experiments and for evaluations of innovative concepts was provided and tested. N2 - Miniaturisierte Satellitensysteme übernehmen zunehmend eine entscheidende Rolle in der fortschreitenden Globalisierung und Demokratisierung der Raumfahrt. Großes Innovationspotential und neue Kommerzialisierungschancen verspricht der effektive Einsatz von Kleinstsatelliten in zukünftigen fraktionierten Missionen für Erdbeobachtungs- und Kommunikationsanwendungen. Basierend auf vielen kleinen kooperierenden Systemen können diese Systeme zukünftig große multifunktionale Satelliten ergänzen oder ersetzen. Die Herausforderung bei der Entwicklung miniaturisierter Satellitensysteme ist die Gratwanderung zwischen der im Rahmen der Miniaturisierung notwendigen Effizienz, der für die Erfüllung der Mission geforderten Zuverlässigkeit und der wünschenswerten Wiederverwendbarkeit und Erweiterbarkeit zur Realisierung agiler Kleinstsatellitenserien. Diese Arbeit adressiert verschiedene Aspekte für den optimalen Entwurf robuster, flexibler und effizienter Kleinstsatelliten am Beispiel des UWE Pico-Satelliten Bus der Universität Würzburg. Mit dem Ziel der Entwicklung einer soliden Basisplattform für zukünftige Kleinstsatelliten-Formationen wurden entsprechende Designansätze im Rahmen des UWE-3 Projektes in einem integralen Designansatz konsistent umgesetzt. Neben der Entwicklung von effizienten Redundanzkonzepten mit minimalem Overhead für den optimalen Betrieb auf Ressourcen-limitierten Kleinstsatelliten wurde ein modularer Satellitenbus entworfen, der als eine robuste und erweiterbare Basis für zukünftige Missionen dienen soll. Damit realisiert UWE-3 eine der effizientesten Kleinstsatelliten-Architekturen die in den letzten Jahren in den Orbit gebracht wurde. Dargestellte Missionsergebnisse fassen den erfolgreichen Betrieb des Satelliten seit seinem Launch in Jahr 2013 zusammen. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 11 KW - Kleinsatellit KW - Fehlertoleranz KW - Miniaturisierung KW - Modularität KW - Picosatellite KW - Satellit Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136523 SN - 978-3-945459-10-2 ER - TY - THES A1 - Borrmann, Dorit T1 - Multi-modal 3D mapping - Combining 3D point clouds with thermal and color information T1 - Multi-modale 3D-Kartierung - Kombination von 3D-Punktwolken mit Thermo- und Farbinformation N2 - Imagine a technology that automatically creates a full 3D thermal model of an environment and detects temperature peaks in it. For better orientation in the model it is enhanced with color information. The current state of the art for analyzing temperature related issues is thermal imaging. It is relevant for energy efficiency but also for securing important infrastructure such as power supplies and temperature regulation systems. Monitoring and analysis of the data for a large building is tedious as stable conditions need to be guaranteed for several hours and detailed notes about the pose and the environment conditions for each image must be taken. For some applications repeated measurements are necessary to monitor changes over time. The analysis of the scene is only possible through expertise and experience. This thesis proposes a robotic system that creates a full 3D model of the environment with color and thermal information by combining thermal imaging with the technology of terrestrial laser scanning. The addition of a color camera facilitates the interpretation of the data and allows for other application areas. The data from all sensors collected at different positions is joined in one common reference frame using calibration and scan matching. The first part of the thesis deals with 3D point cloud processing with the emphasis on accessing point cloud data efficiently, detecting planar structures in the data and registering multiple point clouds into one common coordinate system. The second part covers the autonomous exploration and data acquisition with a mobile robot with the objective to minimize the unseen area in 3D space. Furthermore, the combination of different modalities, color images, thermal images and point cloud data through calibration is elaborated. The last part presents applications for the the collected data. Among these are methods to detect the structure of building interiors for reconstruction purposes and subsequent detection and classification of windows. A system to project the gathered thermal information back into the scene is presented as well as methods to improve the color information and to join separately acquired point clouds and photo series. A full multi-modal 3D model contains all the relevant geometric information about the recorded scene and enables an expert to fully analyze it off-site. The technology clears the path for automatically detecting points of interest thereby helping the expert to analyze the heat flow as well as localize and identify heat leaks. The concept is modular and neither limited to achieving energy efficiency nor restricted to the use in combination with a mobile platform. It also finds its application in fields such as archaeology and geology and can be extended by further sensors. N2 - Man stelle sich eine Technologie vor, die automatisch ein vollständiges 3D-Thermographiemodell einer Umgebung generiert und Temperaturspitzen darin erkennt. Zur besseren Orientierung innerhalb des Modells ist dieses mit Farbinformationen erweitert. In der Analyse temperaturrelevanter Fragestellungen sind Thermalbilder der Stand der Technik. Darunter fallen Energieeffizienz und die Sicherung wichtiger Infrastruktur, wie Energieversorgung und Systeme zur Temperaturregulierung. Die Überwachung und anschließende Analyse der Daten eines großen Gebäudes ist aufwändig, da über mehrere Stunden stabile Bedingungen garantiert und detaillierte Aufzeichnungen über die Aufnahmeposen und die Umgebungsverhältnisse für jedes Wärmebild erstellt werden müssen. Einige Anwendungen erfordern wiederholte Messungen, um Veränderungen über die Zeit zu beobachten. Eine Analyse der Szene ist nur mit Erfahrung und Expertise möglich. Diese Arbeit stellt ein Robotersystem vor, das durch Kombination von Thermographie mit terrestrischem Laserscanning ein vollständiges 3D Modell der Umgebung mit Farb- und Temperaturinformationen erstellt. Die ergänzende Farbkamera vereinfacht die Interpretation der Daten und eröffnet weitere Anwendungsfelder. Die an unterschiedlichen Positionen aufgenommenen Daten aller Sensoren werden durch Kalibrierung und Scanmatching in einem gemeinsamen Bezugssystem zusammengefügt. Der erste Teil der Arbeit behandelt 3D-Punktwolkenverarbeitung mit Schwerpunkt auf effizientem Punktzugriff, Erkennung planarer Strukturen und Registrierung mehrerer Punktwolken in einem gemeinsamen Koordinatensystem. Der zweite Teil beschreibt die autonome Erkundung und Datenakquise mit einem mobilen Roboter, mit dem Ziel, die bisher nicht erfassten Bereiche im 3D-Raum zu minimieren. Des Weiteren wird die Kombination verschiedener Modalitäten, Farbbilder, Thermalbilder und Punktwolken durch Kalibrierung ausgearbeitet. Den abschließenden Teil stellen Anwendungsszenarien für die gesammelten Daten dar, darunter Methoden zur Erkennung der Innenraumstruktur für die Rekonstruktion von Gebäuden und der anschließenden Erkennung und Klassifizierung von Fenstern. Ein System zur Rückprojektion der gesammelten Thermalinformation in die Umgebung wird ebenso vorgestellt wie Methoden zur Verbesserung der Farbinformationen und zum Zusammenfügen separat aufgenommener Punktwolken und Fotoreihen. Ein vollständiges multi-modales 3D Modell enthält alle relevanten geometrischen Informationen der aufgenommenen Szene und ermöglicht einem Experten, diese standortunabhängig zu analysieren. Diese Technologie ebnet den Weg für die automatische Erkennung relevanter Bereiche und für die Analyse des Wärmeflusses und vereinfacht somit die Lokalisierung und Identifikation von Wärmelecks für den Experten. Das vorgestellte modulare Konzept ist weder auf den Anwendungsfall Energieeffizienz beschränkt noch auf die Verwendung einer mobilen Plattform angewiesen. Es ist beispielsweise auch in Feldern wie der Archäologie und Geologie einsetzbar und kann durch zusätzliche Sensoren erweitert werden. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 14 KW - Punktwolke KW - Lidar KW - Thermografie KW - Robotik KW - 3D point cloud KW - Laser scanning KW - Robotics KW - 3D thermal mapping KW - Registration Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-157085 SN - 978-3-945459-20-1 SN - 1868-7474 SN - 1868-7466 ER - TY - THES A1 - Bleier, Michael T1 - Underwater Laser Scanning - Refractive Calibration, Self-calibration and Mapping for 3D Reconstruction T1 - Laserscanning unter Wasser - Refraktive Kalibrierung, Selbstkalibrierung und Kartierung zur 3D Rekonstruktion N2 - There is great interest in affordable, precise and reliable metrology underwater: Archaeologists want to document artifacts in situ with high detail. In marine research, biologists require the tools to monitor coral growth and geologists need recordings to model sediment transport. Furthermore, for offshore construction projects, maintenance and inspection millimeter-accurate measurements of defects and offshore structures are essential. While the process of digitizing individual objects and complete sites on land is well understood and standard methods, such as Structure from Motion or terrestrial laser scanning, are regularly applied, precise underwater surveying with high resolution is still a complex and difficult task. Applying optical scanning techniques in water is challenging due to reduced visibility caused by turbidity and light absorption. However, optical underwater scanners provide significant advantages in terms of achievable resolution and accuracy compared to acoustic systems. This thesis proposes an underwater laser scanning system and the algorithms for creating dense and accurate 3D scans in water. It is based on laser triangulation and the main optical components are an underwater camera and a cross-line laser projector. The prototype is configured with a motorized yaw axis for capturing scans from a tripod. Alternatively, it is mounted to a moving platform for mobile mapping. The main focus lies on the refractive calibration of the underwater camera and laser projector, the image processing and 3D reconstruction. For highest accuracy, the refraction at the individual media interfaces must be taken into account. This is addressed by an optimization-based calibration framework using a physical-geometric camera model derived from an analytical formulation of a ray-tracing projection model. In addition to scanning underwater structures, this work presents the 3D acquisition of semi-submerged structures and the correction of refraction effects. As in-situ calibration in water is complex and time-consuming, the challenge of transferring an in-air scanner calibration to water without re-calibration is investigated, as well as self-calibration techniques for structured light. The system was successfully deployed in various configurations for both static scanning and mobile mapping. An evaluation of the calibration and 3D reconstruction using reference objects and a comparison of free-form surfaces in clear water demonstrate the high accuracy potential in the range of one millimeter to less than one centimeter, depending on the measurement distance. Mobile underwater mapping and motion compensation based on visual-inertial odometry is demonstrated using a new optical underwater scanner based on fringe projection. Continuous registration of individual scans allows the acquisition of 3D models from an underwater vehicle. RGB images captured in parallel are used to create 3D point clouds of underwater scenes in full color. 3D maps are useful to the operator during the remote control of underwater vehicles and provide the building blocks to enable offshore inspection and surveying tasks. The advancing automation of the measurement technology will allow non-experts to use it, significantly reduce acquisition time and increase accuracy, making underwater metrology more cost-effective. N2 - Das Interesse an präziser, zuverlässiger und zugleich kostengünstiger Unterwassermesstechnik ist groß. Beispielsweise wollen Archäologen Artefakte in situ mit hoher Detailtreue dokumentieren und in der Meeresforschung benötigen Biologen Messwerkzeuge zur Beobachtung des Korallenwachstums. Auch Geologen sind auf Messdaten angewiesen, um Sedimenttransporte zu modellieren. Darüber hinaus ist für die Errichtung von Offshore-Bauwerken, sowie deren Wartung und Inspektion eine millimetergenaue Vermessung von vorhandenen Strukturen und Defekten unerlässlich. Während die Digitalisierung einzelner Objekte und ganzer Areale an Land gut erforscht ist und verschiedene Standardmethoden, wie zum Beispiel Structure from Motion oder terrestrisches Laserscanning, regelmäßig eingesetzt werden, ist die präzise und hochauflösende Unterwasservermessung nach wie vor eine komplexe und schwierige Aufgabe. Die Anwendung optischer Messtechnik im Wasser ist aufgrund der eingeschränkten Sichttiefe durch Trübung und Lichtabsorption eine Herausforderung. Optische Unterwasserscanner bieten jedoch Vorteile hinsichtlich der erreichbaren Auflösung und Genauigkeit gegenüber akustischen Systemen. In dieser Arbeit werden ein Unterwasser-Laserscanning-System und die Algorithmen zur Erzeugung von 3D-Scans mit hoher Punktdichte im Wasser vorgestellt. Es basiert auf Lasertriangulation und die optischen Hauptkomponenten sind eine Unterwasserkamera und ein Kreuzlinienlaserprojektor. Das System ist mit einer motorisierten Drehachse ausgestattet, um Scans von einem Stativ aus aufzunehmen. Alternativ kann es von einer beweglichen Plattform aus für mobile Kartierung eingesetzt werden. Das Hauptaugenmerk liegt auf der refraktiven Kalibrierung der Unterwasserkamera und des Laserprojektors, der Bildverarbeitung und der 3D-Rekonstruktion. Um höchste Genauigkeit zu erreichen, muss die Brechung an den einzelnen Medienübergängen berücksichtigt werden. Dies wird durch ein physikalisch-geometrisches Kameramodell, das auf einer analytischen Beschreibung der Strahlenverfolgung basiert, und ein optimierungsbasiertes Kalibrierverfahren erreicht. Neben dem Scannen von Unterwasserstrukturen wird in dieser Arbeit auch die 3D-Erfassung von teilweise im Wasser befindlichen Strukturen und die Korrektur der dabei auftretenden Brechungseffekte vorgestellt. Da die Kalibrierung im Wasser komplex und zeitintensiv ist, wird die Übertragung einer Kalibrierung des Scanners in Luft auf die Bedingungen im Wasser ohne Neukalibrierung, sowie die Selbstkalibrierung für Lichtschnittverfahren untersucht. Das System wurde in verschiedenen Konfigurationen sowohl für statisches Scannen als auch für die mobile Kartierung erfolgreich eingesetzt. Die Validierung der Kalibrierung und der 3D-Rekonstruktion anhand von Referenzobjekten und der Vergleich von Freiformflächen in klarem Wasser zeigen das hohe Genauigkeitspotenzial im Bereich von einem Millimeter bis weniger als einem Zentimeter in Abhängigkeit von der Messdistanz. Die mobile Unterwasserkartierung und Bewegungskompensation anhand visuell-inertialer Odometrie wird mit einem neuen optischen Unterwasserscanner auf Basis der Streifenprojektion demonstriert. Dabei ermöglicht die kontinuierliche Registrierung von Einzelscans die Erfassung von 3D-Modellen von einem Unterwasserfahrzeug aus. Mit Hilfe von parallel aufgenommenen RGB-Bildern werden dabei farbige 3D-Punktwolken der Unterwasserszenen erstellt. Diese 3D-Karten dienen beispielsweise dem Bediener bei der Fernsteuerung von Unterwasserfahrzeugen und bilden die Grundlage für Offshore-Inspektions- und Vermessungsaufgaben. Die fortschreitende Automatisierung der Messtechnik wird somit auch eine Verwendung durch Nichtfachleute ermöglichen und gleichzeitig die Erfassungszeit erheblich verkürzen und die Genauigkeit verbessern, was die Vermessung im Wasser kostengünstiger und effizienter macht. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 28 KW - Selbstkalibrierung KW - Punktwolke KW - Bildverarbeitung KW - 3D Reconstruction KW - Self-calibration KW - Underwater Scanning KW - Underwater Mapping KW - Dreidimensionale Rekonstruktion KW - 3D-Rekonstruktion Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322693 SN - 978-3-945459-45-4 ER - TY - THES A1 - Bangert, Philip T1 - Magnetic Attitude Control of Miniature Satellites and its Extension towards Orbit Control using an Electric Propulsion System T1 - Magnetische Lageregelung von Kleinstsatelliten und ihre Erweiterung zur Orbitregelung durch die Integration eines Elektrischen Antriebssystems N2 - The attitude and orbit control system of pico- and nano-satellites to date is one of the bottle necks for future scientific and commercial applications. A performance increase while keeping with the satellites’ restrictions will enable new space missions especially for the smallest of the CubeSat classes. This work addresses methods to measure and improve the satellite’s attitude pointing and orbit control performance based on advanced sensor data analysis and optimized on-board software concepts. These methods are applied to spaceborne satellites and future CubeSat missions to demonstrate their validity. An in-orbit calibration procedure for a typical CubeSat attitude sensor suite is developed and applied to the UWE-3 satellite in space. Subsequently, a method to estimate the attitude determination accuracy without the help of an external reference sensor is developed. Using this method, it is shown that the UWE-3 satellite achieves an in-orbit attitude determination accuracy of about 2°. An advanced data analysis of the attitude motion of a miniature satellite is used in order to estimate the main attitude disturbance torque in orbit. It is shown, that the magnetic disturbance is by far the most significant contribution for miniature satellites and a method to estimate the residual magnetic dipole moment of a satellite is developed. Its application to three CubeSats currently in orbit reveals that magnetic disturbances are a common issue for this class of satellites. The dipole moments measured are between 23.1mAm² and 137.2mAm². In order to autonomously estimate and counteract this disturbance in future missions an on-board magnetic dipole estimation algorithm is developed. The autonomous neutralization of such disturbance torques together with the simplification of attitude control for the satellite operator is the focus of a novel on-board attitude control software architecture. It incorporates disturbance torques acting on the satellite and automatically optimizes the control output. Its application is demonstrated in space on board of the UWE-3 satellite through various attitude control experiments of which the results are presented here. The integration of a miniaturized electric propulsion system will enable CubeSats to perform orbit control and, thus, open up new application scenarios. The in-orbit characterization, however, poses the problem of precisely measuring very low thrust levels in the order of µN. A method to measure this thrust based on the attitude dynamics of the satellite is developed and evaluated in simulation. It is shown, that the demonstrator mission UWE-4 will be able to measure these thrust levels with a high accuracy of 1% for thrust levels higher than 1µN. The orbit control capabilities of UWE-4 using its electric propulsion system are evaluated and a hybrid attitude control system making use of the satellite’s magnetorquers and the electric propulsion system is developed. It is based on the flexible attitude control architecture mentioned before and thrust vector pointing accuracies of better than 2° can be achieved. This results in a thrust delivery of more than 99% of the desired acceleration in the target direction. N2 - Eine präzise Lage- und Orbitregelung stellt derzeit eine der größten Limitierungen der Einsatzmöglichkeiten von Kleinstsatelliten dar. Um zukünftige wissenschaftliche und kommerzielle Missionen auch mit dieser Klasse von Satelliten erfolgreich durchführen zu können, ist eine Leistungssteigerung bei gleichbleibender Größe und Masse nötig. Die vorliegende Arbeit beschäftigt sich mit der Verbesserung des Lageregelungssystems, der Vermessung der Ausrichtgenauigkeit im Orbit und der Herstellung von Orbitregelungskapazitäten mithilfe von fortschrittlicher Sensordatenanalyse und optimierter on-board Software. Die hier entwickelten Methoden wurden an im Orbit befindlichen Satelliten demonstriert und deren Gültigkeit gezeigt. Neben einer Methode um die typische CubeSat Lageerkennungssensorik im Orbit zu kalibrieren wurde ein Verfahren entwickelt, um die Ausrichtgenauigkeit ohne die Zuhilfenahme eines externen Referenzsensors zu bestimmen. Beide Verfahren wurden mithilfe des UWE-3 Satelliten im Orbit demonstriert. Die genaue Analyse der Dynamik eines Satelliten gibt Aufschluss über die vorwiegend herrschenden Störmomente. Für Kleinstsatelliten im erdnahen Orbit kann gezeigt werden, dass Störungen aufgrund von statischen magnetischen Verunreinigungen bei Weitem am meisten Einfluss auf die Dynamik des Satelliten haben. In dieser Arbeit wird eine Methode präsentiert, die Daten der Lageerkennung nutzt um das magnetische Dipolmoment eines Kleinstsatelliten zu bestimmen. Mithilfe dieses Verfahrens konnte das Dipolmoment von drei unterschiedlichen CubeSats im Bereicht von 23.1mAm² bis 137.2mAm² präzise bestimmt werden. Um die Lageregelungsgenauigkeit zu steigern wird ein Software Konzept präsentiert, welches die bekannten Störungen der Satellitendynamik inherent und energieoptimiert kompensiert. Die Anwendung dieser on-board Software wurde mit UWE-3 in einer Vielzahl von Lageregelungsexperimenten im Orbit demonstriert. Die Integration von elektrischen Antrieben wird zukünftigen Kleinstsatelliten die Möglichkeit zur Orbitkontrolle geben und damit viele neue Anwendungsszenarien eröffnen. Die Qualifizierung und Vermessung der Triebwerke im Orbit stellt jedoch eine technische Schwierigkeit dar, da Schübe im Bereich von µN gemessen werden müssen. Ein Verfahren zur genauen Bestimmung des Schubs eines solchen Triebwerks basierend auf dessen Auswirkung auf die Satellitendynamik wurde entwickelt und wird hier mit Hilfe von Simulationen für die UWE-4 Mission demonstriert. Es wird gezeigt, dass mit Hilfe von UWE-4 der Schub der Triebwerke mit einer hohen Genauigkeit von 1% Fehler für Schübe größer 1µN gemessen werden können. Eine magnetische Lageregelung unter Zuhilfenahme der elektischen Antriebe stellt das Konzept der hybriden Lage- und Orbitregelung für UWE-4 dar. Die damit erzielbare Leistung hinsichtlich der Ausrichtgenauigkeit sowie Orbitregelung wurde untersucht und ist hier für verschiedene Szenarien gezeigt. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 19 KW - Satellit KW - Lageregelung KW - Plasmaantrieb KW - Attitude Determination and Control KW - Attitude Dynamics KW - Thrust Vector Control KW - Kleinsatellit Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-177020 SN - 978-3-945459-28-7 (online) SN - 1868-7474 ER - TY - THES A1 - Baier, Pablo A. T1 - Simulator for Minimally Invasive Vascular Interventions: Hardware and Software T1 - VR-Simulation für das Training von Herzkathetereingriffen: Hard- und Softwarelösung N2 - A complete simulation system is proposed that can be used as an educational tool by physicians in training basic skills of Minimally Invasive Vascular Interventions. In the first part, a surface model is developed to assemble arteries having a planar segmentation. It is based on Sweep Surfaces and can be extended to T- and Y-like bifurcations. A continuous force vector field is described, representing the interaction between the catheter and the surface. The computation time of the force field is almost unaffected when the resolution of the artery is increased. The mechanical properties of arteries play an essential role in the study of the circulatory system dynamics, which has been becoming increasingly important in the treatment of cardiovascular diseases. In Virtual Reality Simulators, it is crucial to have a tissue model that responds in real time. In this work, the arteries are discretized by a two dimensional mesh and the nodes are connected by three kinds of linear springs. Three tissue layers (Intima, Media, Adventitia) are considered and, starting from the stretch-energy density, some of the elasticity tensor components are calculated. The physical model linearizes and homogenizes the material response, but it still contemplates the geometric nonlinearity. In general, if the arterial stretch varies by 1% or less, then the agreement between the linear and nonlinear models is trustworthy. In the last part, the physical model of the wire proposed by Konings is improved. As a result, a simpler and more stable method is obtained to calculate the equilibrium configuration of the wire. In addition, a geometrical method is developed to perform relaxations. It is particularly useful when the wire is hindered in the physical method because of the boundary conditions. The physical and the geometrical methods are merged, resulting in efficient relaxations. Tests show that the shape of the virtual wire agrees with the experiment. The proposed algorithm allows real-time executions and the hardware to assemble the simulator has a low cost. N2 - Es wird ein vollständiges Simulationssystem entwickelt, das von Ärzten als Lehrmittel zur Ausbildung grundlegender Fertigkeiten bei Herzkathetereingriffen eingesetzt werden kann. Im ersten Teil wird ein Oberflächenmodell zur Erstellung von Arterien mit planarer Segmentierung entwickelt. Im zweiten Teil werden die Arterien durch ein zweidimensionales Netz diskretisiert, die Knoten werden durch drei Arten linearer Federn verbunden und ausgehend von einer Dehnungsenergie-Dichte-Funktion werden einige Komponenten des Elastizitätstensors berechnet. Im letzten Teil wird das von anderen Autoren vorgeschlagene physikalische Modell des Drahtes verbessert und eine neue geometrische Methode entwickelt. Der vorgeschlagene Algorithmus ermöglicht Echtzeit-Ausführungen. Die Hardware des Simulators hat geringe Herstellungskosten. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 15 KW - Computersimulation KW - Simulator KW - Arterie KW - Elastizitätstensor KW - Herzkatheter KW - Minimally invasive vascular intervention KW - Wire relaxation KW - Artery KW - Elasticity tensor KW - Stiffness KW - educational tool KW - Elastizitätstensor KW - Herzkathetereingriff KW - Software KW - Hardware Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-161190 SN - 978-3-945459-22-5 ER - TY - THES A1 - Aschenbrenner, Doris T1 - Human Robot Interaction Concepts for Human Supervisory Control and Telemaintenance Applications in an Industry 4.0 Environment T1 - Mensch-Roboter-Interaktionskonzepte für Fernsteuerungs- und Fernwartungsanwendungen in einer Industrie 4.0 Umgebung N2 - While teleoperation of technical highly sophisticated systems has already been a wide field of research, especially for space and robotics applications, the automation industry has not yet benefited from its results. Besides the established fields of application, also production lines with industrial robots and the surrounding plant components are in need of being remotely accessible. This is especially critical for maintenance or if an unexpected problem cannot be solved by the local specialists. Special machine manufacturers, especially robotics companies, sell their technology worldwide. Some factories, for example in emerging economies, lack qualified personnel for repair and maintenance tasks. When a severe failure occurs, an expert of the manufacturer needs to fly there, which leads to long down times of the machine or even the whole production line. With the development of data networks, a huge part of those travels can be omitted, if appropriate teleoperation equipment is provided. This thesis describes the development of a telemaintenance system, which was established in an active production line for research purposes. The customer production site of Braun in Marktheidenfeld, a factory which belongs to Procter & Gamble, consists of a six-axis cartesian industrial robot by KUKA Industries, a two-component injection molding system and an assembly unit. The plant produces plastic parts for electric toothbrushes. In the research projects "MainTelRob" and "Bayern.digital", during which this plant was utilised, the Zentrum für Telematik e.V. (ZfT) and its project partners develop novel technical approaches and procedures for modern telemaintenance. The term "telemaintenance" hereby refers to the integration of computer science and communication technologies into the maintenance strategy. It is particularly interesting for high-grade capital-intensive goods like industrial robots. Typical telemaintenance tasks are for example the analysis of a robot failure or difficult repair operations. The service department of KUKA Industries is responsible for the worldwide distributed customers who own more than one robot. Currently such tasks are offered via phone support and service staff which travels abroad. They want to expand their service activities on telemaintenance and struggle with the high demands of teleoperation especially regarding security infrastructure. In addition, the facility in Marktheidenfeld has to keep up with the high international standards of Procter & Gamble and wants to minimize machine downtimes. Like 71.6 % of all German companies, P&G sees a huge potential for early information on their production system, but complains about the insufficient quality and the lack of currentness of data. The main research focus of this work lies on the human machine interface for all human tasks in a telemaintenance setup. This thesis provides own work in the use of a mobile device in context of maintenance, describes new tools on asynchronous remote analysis and puts all parts together in an integrated telemaintenance infrastructure. With the help of Augmented Reality, the user performance and satisfaction could be raised. A special regard is put upon the situation awareness of the remote expert realized by different camera viewpoints. In detail the work consists of: - Support of maintenance tasks with a mobile device - Development and evaluation of a context-aware inspection tool - Comparison of a new touch-based mobile robot programming device to the former teach pendant - Study on Augmented Reality support for repair tasks with a mobile device - Condition monitoring for a specific plant with industrial robot - Human computer interaction for remote analysis of a single plant cycle - A big data analysis tool for a multitude of cycles and similar plants - 3D process visualization for a specific plant cycle with additional virtual information - Network architecture in hardware, software and network infrastructure - Mobile device computer supported collaborative work for telemaintenance - Motor exchange telemaintenance example in running production environment - Augmented reality supported remote plant visualization for better situation awareness N2 - Die Fernsteuerung technisch hochentwickelter Systeme ist seit vielen Jahren ein breites Forschungsfeld, vor allem im Bereich von Weltraum- und Robotikanwendungen. Allerdings hat die Automatisierungsindustrie bislang zu wenig von den Ergebnissen dieses Forschungsgebiets profitiert. Auch Fertigungslinien mit Industrierobotern und weiterer Anlagenkomponenten müssen über die Ferne zugänglich sein, besonders bei Wartungsfällen oder wenn unvorhergesehene Probleme nicht von den lokalen Spezialisten gelöst werden können. Hersteller von Sondermaschinen wie Robotikfirmen verkaufen ihre Technologie weltweit. Kunden dieser Firmen besitzen beispielsweise Fabriken in Schwellenländern, wo es an qualifizierten Personal für Reparatur und Wartung mangelt. Wenn ein ernster Fehler auftaucht, muss daher ein Experte des Sondermaschinenherstellers zum Kunden fliegen. Das führt zu langen Stillstandzeiten der Maschine. Durch die Weiterentwicklung der Datennetze könnte ein großer Teil dieser Reisen unterbleiben, wenn eine passende Fernwartungsinfrastruktur vorliegen würde. Diese Arbeit beschreibt die Entwicklung eines Fernwartungssystems, welches in einer aktiven Produktionsumgebung für Forschungszwecke eingerichtet wurde. Die Fertigungsanlage des Kunden wurde von Procter & Gamble in Marktheidenfeld zur Verfügung gestellt und besteht aus einem sechsachsigen, kartesischen Industrieroboter von KUKA Industries, einer Zweikomponentenspritzgussanlage und einer Montageeinheit. Die Anlage produziert Plastikteile für elektrische Zahnbürsten. Diese Anlage wurde im Rahmen der Forschungsprojekte "MainTelRob" und "Bayern.digital" verwendet, in denen das Zentrum für Telematik e.V. (ZfT) und seine Projektpartner neue Ansätze und Prozeduren für moderne Fernwartungs-Technologien entwickeln. Fernwartung bedeutet für uns die umfassende Integration von Informatik und Kommunikationstechnologien in der Wartungsstrategie. Das ist vor allem für hochentwickelte, kapitalintensive Güter wie Industrierobotern interessant. Typische Fernwartungsaufgaben sind beispielsweise die Analyse von Roboterfehlermeldungen oder schwierige Reparaturmaßnahmen. Die Service-Abteilung von KUKA Industries ist für die weltweit verteilten Kunden zuständig, die teilweise auch mehr als einen Roboter besitzen. Aktuell werden derartige Aufgaben per Telefonauskunft oder mobilen Servicekräften, die zum Kunden reisen, erledigt. Will man diese komplizierten Aufgaben durch Fernwartung ersetzen um die Serviceaktivitäten auszuweiten muss man mit den hohen Anforderungen von Fernsteuerung zurechtkommen, besonders in Bezug auf Security Infrastruktur. Eine derartige umfassende Herangehensweise an Fernwartung bietet aber auch einen lokalen Mehrwert beim Kunden: Die Fabrik in Marktheidenfeld muss den hohen internationalen Standards von Procter & Gamble folgen und will daher die Stillstandzeiten weiter verringern. Wie 71,6 Prozent aller deutschen Unternehmen sieht auch P&G Marktheidenfeld ein großes Potential für frühe Informationen aus ihrem Produktionssystem, haben aber aktuell noch Probleme mit der Aktualität und Qualität dieser Daten. Der Hauptfokus der hier vorgestellten Forschung liegt auf der Mensch-Maschine-Schnittstelle für alle Aufgaben eines umfassenden Fernwartungskontextes. Diese Arbeit stellt die eigene Arbeiten bei der Verwendung mobiler Endgeräte im Kontext der Wartung und neue Softwarewerkzeuge für die asynchrone Fernanalyse vor und integriert diese Aspekte in eine Fernwartungsinfrastruktur. In diesem Kontext kann gezeigt werden, dass der Einsatz von Augmented Reality die Nutzerleistung und gleichzeitig die Zufriedenheit steigern kann. Dabei wird auf das sogenannte "situative Bewusstsein" des entfernten Experten besonders Wert gelegt. Im Detail besteht die Arbeit aus: - Unterstützung von Wartungsaufgaben mit mobilen Endgeräten - Entwicklung und Evaluation kontextsensitiver Inspektionssoftware - Vergleich von touch-basierten Roboterprogrammierung mit der Vorgängerversion des Programmierhandgeräts - Studien über die Unterstützung von Reparaturaufgaben durch Augmented Reality - Zustandsüberwachung für eine spezielle Anlage mit Industrieroboter - Mensch-Maschine Interaktion für die Teleanalyse eines Produktionszyklus - Grafische Big Data Analyse einer Vielzahl von Produktionszyklen - 3D Prozess Visualisierung und Anreicherung mit virtuellen Informationen - Hardware, Software und Netzwerkarchitektur für die Fernwartung - Computerunterstützte Zusammenarbeit mit Verwendung mobiler Endgeräte für die Fernwartung - Fernwartungsbeispiel: Durchführung eines Motortauschs in der laufenden Produktion - Augmented Reality unterstütze Visualisierung des Anlagenkontextes für die Steigerung des situativen Bewusstseins T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 13 KW - Fernwartung KW - Robotik KW - Mensch-Maschine-Schnittstelle KW - Erweiterte Realität KW - Situation Awareness KW - Industrie 4.0 KW - Industrial internet Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150520 SN - 978-3-945459-18-8 ER - TY - THES A1 - Albert, Michael T1 - Intelligent analysis of medical data in a generic telemedicine infrastructure T1 - Intelligente Datenanalyse in einer generischen Telemedizinumgebung N2 - Telemedicine uses telecommunication and information technology to provide health care services over spatial distances. In the upcoming demographic changes towards an older average population age, especially rural areas suffer from a decreasing doctor to patient ratio as well as a limited amount of available medical specialists in acceptable distance. These areas could benefit the most from telemedicine applications as they are known to improve access to medical services, medical expertise and can also help to mitigate critical or emergency situations. Although the possibilities of telemedicine applications exist in the entire range of healthcare, current systems focus on one specific disease while using dedicated hardware to connect the patient with the supervising telemedicine center. This thesis describes the development of a telemedical system which follows a new generic design approach. This bridges the gap of existing approaches that only tackle one specific application. The proposed system on the contrary aims at supporting as many diseases and use cases as possible by taking all the stakeholders into account at the same time. To address the usability and acceptance of the system it is designed to use standardized hardware like commercial medical sensors and smartphones for collecting medical data of the patients and transmitting them to the telemedical center. The smartphone can also act as interface to the patient for health questionnaires or feedback. The system can handle the collection and transport of medical data, analysis and visualization of the data as well as providing a real time communication with video and audio between the users. On top of the generic telemedical framework the issue of scalability is addressed by integrating a rule-based analysis tool for the medical data. Rules can be easily created by medical personnel via a visual editor and can be personalized for each patient. The rule-based analysis tool is extended by multiple options for visualization of the data, mechanisms to handle complex rules and options for performing actions like raising alarms or sending automated messages. It is sometimes hard for the medical experts to formulate their knowledge into rules and there may be information in the medical data that is not yet known. This is why a machine learning module was integrated into the system. It uses the incoming medical data of the patients to learn new rules that are then presented to the medical personnel for inspection. This is in line with European legislation where the human still needs to be in charge of such decisions. Overall, we were able to show the benefit of the generic approach by evaluating it in three completely different medical use cases derived from specific application needs: monitoring of COPD (chronic obstructive pulmonary disease) patients, support of patients performing dialysis at home and councils of intensive-care experts. In addition the system was used for a non-medical use case: monitoring and optimization of industrial machines and robots. In all of the mentioned cases, we were able to prove the robustness of the generic approach with real users of the corresponding domain. This is why we can propose this approach for future development of telemedical systems. N2 - Telemedizin nutzt Telekommunikation und Informationstechnologie, um medizinische Dienstleistungen über räumliche Distanzen hinweg zu ermöglichen. Durch den demographischen Wandel hin zu einer älteren Bevölkerung, verschlechtert sich vor allem im ländlichen Raum der Betreuungsschlüssel zwischen (Fach-)ärzten und Patienten, während Experten in den jeweiligen medizinischen Spezialgebieten sehr weit verteilt sind und Anfahrtswege immer weiter werden. Gerade der ländliche Raum profitiert von der Telemedizin. Anfahrtswege entfallen, wenn Untersuchungen oder ärztliche Konzile über Telemedizinsysteme abgewickelt werden. Kritische Situationen können entschärft oder vermieden werden, wenn Spezialisten durch Telemedizin frühzeitig eingebunden werden. Aktuelle Telemedizinsysteme sind allerdings generell auf ein bestimmtes Krankheitsbild beschränkt und verwenden dedizierte Hardware, um den Patienten mit dem telemedizinischen Zentrum zu verbinden, obwohl ein breiteres Anwendungsspektrum in der gesamten Gesundheitsversorgung denkbar ist. Diese Arbeit beschreibt die Entwicklung eines Telemedizinsystems, das darauf ausgelegt ist das System so generisch zu planen und zu entwickeln, dass möglichst viele Krankheitsbilder und Anwendungsfälle abgebildet werden können. Dafür werden alle möglichen Beteiligten des Systems mit berücksichtigt und einbezogen. Um das Telemedizinsystem bedienerfreundlich zu gestalten und die Akzeptanz zu erhöhen, wurde auf den Einsatz von Standardhardware, wie kommerzielle medizinische Sensorik oder Smartphones, hoher Wert gelegt. Das Smartphone dient dabei unter anderem als Patientengerät, das die Daten verschiedenster Sensorik auslesen, aggregieren und an das zentrale System weiterleiten kann. Es kann interaktive Fragebögen anzeigen und verwendet werden, um dem Patienten Feedback zu den Daten zu geben. Das Telemedizinsystem unterstützt die komplette Kette der telemedizinischen Datenverarbeitung, von der Aufnahme der Daten über den abgesicherten Transport bis hin zur Analyse und Visualisierung der Daten. Zusätzlich wird eine Kommunikationsmöglichkeit der Beteiligten über Audio- oder Videotelefonie zur Verfügung gestellt. Um die Skalierbarkeit des Systems zu erhöhen, wurde ein regelbasiertes Auswertesystem für die Patientendaten implementiert. Das medizinische Personal kann über ein einfach zu bedienendes grafisches Interface patientenindividuelle Regeln anlegen. Das Regelsystem ist in der Lage die Daten anhand komplexer Regeln zu analysieren, Visualisierungen zu erzeugen oder Aktionen auszulösen, wie beispielsweise einen Alarm zu geben, wenn die Werte des Patienten sich verschlechtern. Es kommt vor, dass die Experten ihr Wissen nicht in konkrete Regeln formulieren können oder dass Wissen in den Daten steckt, das den Experten selbst nicht bekannt ist. Deshalb kommt ein weiteres Modul zum Einsatz, das anhand der eingehenden Daten mittels maschinellem Lernen neue Regeln erzeugt und dem Fachpersonal zur Überprüfung vorschlägt. Die letzte Entscheidung liegt immer bei dem jeweiligen Fachpersonal, so dass das System konform zu aktuellem europäischem Recht arbeitet. Der generische Ansatz des Telemedizinsystems wurde in drei verschiedenen medizinischen Anwendungsszenarien mit den entsprechenden Anwendern getestet: Langzeitmonitoring von COPD (chronisch obstruktive Lungenerkrankung) Patienten, Unterstützung von Heimdialyse Patienten und intensivmedizinische Konsile. Zusätzlich wurde das System im industriellen Anwendungskontext zum Überwachen und Optimieren von Industrieanlagen und Industrierobotern eingesetzt. In allen Anwendungsfällen konnten wir die Machbarkeit des Systems zeigen und mit Anwendern aus dem jeweiligen Fachbereich evaluieren. Das System kann somit als robuste Grundlage für die Entwicklung weiterer Telemedizinsysteme und Anwendungen dienen. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 17 KW - Telemedizin KW - Regelbasiertes Modell KW - telemedicine KW - rulebased analysis Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-174213 SN - 978-3-945459-26-3 (Online) ER -