TY - THES A1 - Hartmann, Fabian T1 - Elektrooptische Transporteigenschaften und stochastisch aktivierte Prozesse Resonanter Tunneldioden T1 - Electro-optical and transport properties and stochastically activated processes of resonant tunneling diodes N2 - Im Rahmen der vorliegenden Arbeit wurden elektrooptische Transporteigenschaften und stochastisch aktivierte Prozesse Resonanter Tunneldioden (RTDs) bei Raumtemperatur untersucht. Die RTDs wurden auf dem III-V Halbleitermaterialsystem AlGaAs/GaAs durch Molekularstrahlepitaxie, Elektronenstrahllithographie und trockenchemischen Ätztechniken hergestellt. Im Bereich des negativen differentiellen Leitwerts konnte bistabi-les Schalten und hierbei stochastisch aktivierte Dynamik nichtlinearer Systeme untersucht werden. Die Flächenabhängigkeit der Ätzrate konnte ausgenutzt werden, um RTDs mit einem Stamm und zwei Transportästen zu realisieren, welche hinsichtlich ihrer optischen und elektrischen Eigenschaften untersucht wurden. Im ersten experimentellen Abschnitt 3.1 werden die elektrischen Transporteigenschaften Resonanter Tunneldioden bei Raum-temperatur und die Flächenabhängigkeit des kohärenten und nicht-kohärenten Elektronen-transports analysiert. Die Realisierung universeller logischer Gatter (NOR und NAND) und deren Rekonfigurierbarkeit durch einen externen Kontrollparameter wird in Abschnitt 3.2 gezeigt. In Abschnitt 3.3 wird die Lichtsensitivität Resonanter Tunneldioden als Photode-tektoren für den sichtbaren Wellenlängenbereich und in Abschnitt 3.4 für die Telekommu-nikationswellenlänge bei λ = 1,3 µm demonstriert. N2 - In this thesis, electro-optical transport properties and stochastically-activated processes of resonant tunneling diodes (RTDs) were investigated at room temperature. The RTDs were prepared on the basis of AlGaAs/GaAs heterostructures by molecular beam epitaxy, elec-tron beam lithography and dry chemical etching techniques. In the region of negative dif-ferential conductance (NDC) bistable RTD switching was achieved by exploiting the load line effect in combination with stochastically-activated dynamics of nonlinear systems. The surface dependence of the etching rate was exploited in order to realize RTDs with a stem and two transport branches, which were studied with respect to their optical and electrical properties. In the first section of the experimental part, electrical transport properties of resonant tunneling diodes at room temperature and the area dependence of the coherent and non-coherent electron transport properties are described. The realization of universal logic gates (NAND and NOR) and their reconfigurability by external control parameters is then demonstrated in Section 3.2. The light sensitivity of resonant tunneling diode photo-detectors was studied for the visible wavelength range and for the telecommunication wavelength at λ = 1.3 µm, in Section 3.3, and 3.4, respectively. KW - Resonanz-Tunneldiode KW - resonant tunneling diode KW - Resonanztunneldiode KW - noise KW - stochastic resonance KW - photo detector KW - Rauschen KW - Stochastische Resonanz KW - Lichtsensor KW - Elektrooptische Eigenschaft KW - Tunneldiode Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-90876 ER - TY - THES A1 - Rauh, Daniel T1 - Impact of Charge Carrier Density and Trap States on the Open Circuit Voltage and the Polaron Recombination in Organic Solar Cells T1 - Einfluss der Ladungsträgerdichte und Störstellen auf die Leerlaufspannung und die Polaronenrekombination in organischen Solarzellen N2 - The focus of this work is studying recombination mechanisms occurring in organic solar cells, as well as their impact on one of their most important parameters — the open circuit voltage Voc. Firstly, the relationship between Voc and the respective charge carrier density n in the active layer under open circuit conditions is analyzed. Therefor, a model after Shockley for the open circuit voltage is used, whose validity is proven with the aid of fits to the measured data. Thereby, it is emphasized that the equation is only valid under special conditions. In the used reference system P3HT:PC61BM the fits are in agreement with the measurement data only in the range of high temperatures (150 - 300 K), where Voc increases linearly with decreasing temperature. At lower temperatures (50 – 150 K), the experiment shows a saturation of Voc. This saturation cannot be explained with the model by the measured falling charge carrier density with decreasing temperatures. In this temperature range Voc is not directly related to the intrinsic properties of the active layer. Voc saturation is due to injection energy barriers at the contacts, which is ascertained by macroscopic simulations. Furthermore, it is observed that Voc in the case of saturation is equivalent to the so-called built-in potential. The difference between the built-in potential and the energy gap corresponds thereby to the sum of the energy barriers at both contacts. With the knowledge of the Voc(n) dependency for not contact limited solar cells, it is possible to investigate the recombination mechanisms of charge carriers in the active layer. For Langevin recombination the recombination rate is Rn2 (recombination order RO = 2), for Shockley-Read-Hall (SRH) Rn1 (RO=1); in various publications RO higher than two is reported with two main explanations. 1: Trap states for charge carriers exist in the respective separated phases, i.e. electrons in the acceptor phase and holes in the donor phase, which leads to a delayed recombination of the charge carriers at the interface of both phases and finally to an apparent recombination order higher than 2. 2: The enhanced R(n) dependency is attributed to the so called recombination prefactor, which again is dependent from n dependent mobility µ. It is shown that for the system P3HT:PC61BM at room temperature the µ(n) dependency does nearly completely explain the higher RO but not at lower temperatures which in this case supports the first explanation. In the material system PTB7:PC71BM the increased RO cannot be explained by the µ(n) dependency even at room temperature. To support the importance of trap states in combination with a phase separation for the explanation of the enhanced RO, additional trap states were incorporated in the solar cells to investigate their influence on the recombination mechanisms. To achieve this, P3HT:PC61BM solar cells were exposed to synthetic air (in the dark and under illumination) or TCNQ was added in small concentrations to the active layer which act as electron traps. For the oxygen degraded solar cell the recombination order is determined by a combination of open Voc-transients and Voc(n) measurements. Thereby, a continuous increase of the recombination order from 2.4 to more than 5 is observed with higher degradation times. By the evaluation of the ideality factor it can be shown that the impact of SRH recombination is increasing with higher trap concentration in relation to Langevin recombination. A similar picture is revealed for solar cells with TCNQ as extrinsic trap states. Finally, a phenomenon called s-shaped IV-curves is investigated, which can sometimes occur for solar cells under illumination. As course of this a reduced surface recombination velocity can be found. Experimentally, the solar cells were fabricated using a special plasma treatment of the ITO contact. The measured IV-curves of such solar cells are reproduced by macroscopic simulations, where the surface recombination velocity is reduced. Hereby, it has to be distinguished between the surface recombination of majority and minority charge carriers at the respective contacts. The theory can be experimentally confirmed by illumination level dependent IV-curves as well as short circuit current density and open circuit voltage transients. N2 - Im Fokus der vorliegenden Arbeit liegen die Rekombinationsmechanismen welche in organischen Solarzellen vorkommen, sowie deren Einfluss auf eine der wichtigsten charakteristischen Kenngrößen dieser - der Leerlaufspannung Voc. Zuerst wird der Zusammenhang zwischen Voc und zugehöriger Ladungsträgerdichte n in der aktiven Schicht unter Leerlaufbedingungen untersucht. Dazu wird ein Modell nach Shockley für die Leerlaufspannung verwendet, dessen Gültigkeit mit Hilfe von Fits an die Messdaten überprüft wird. Dabei stellt sich heraus, dass dieses nur für bestimmte Rahmenbedingungen gültig ist. Im verwendeten Referenzsystem P3HT:PC61BM stimmen die Fits nur im Bereich höherer Temperaturen (150 - 300 K), in denen Voc linear mit sinkenden Temperaturen steigt, mit den Messwerten überein. Im Bereich tieferer Temperaturen (50 - 150 K) stellt sich experimentell eine Sättigung von Voc ein. Diese Sättigung kann mit der gemessenen fallenden Ladungsträgerdichten mit sinkender Temperatur laut Modell nicht erklärt werden. Voc steht in diesem Temperaturbereich deshalb in keinem direkten Zusammenhang zu den intrinsischen Eigenschaften der aktiven Schicht. Die Ursache der Sättigung sind Energiebarrieren an den Kontakten, was mit Hilfe von makroskopischen Simulationen nachgewiesen werden kann. Weiterhin wird festgestellt, dass Voc im Sättigungsfall genau dem sogenannten eingebauten Potential entspricht. Die Differenz zwischen dem eingebauten Potential und der Bandlücke entspricht dabei der Summe der Energiebarrieren an beiden Kontakten. Mit der Erkenntnis, dass für nicht kontaktlimitierte Solarzellen eine Voc(n) Abhängigkeit besteht, kann man sich den Rekombinationsmechanismen in der aktiven Schicht widmen. Für Langevin Rekombination ist die Rekombinstionsrate Rn2 (Rekombinationsordnung RO = 2), für Shockley-Read-Hall (SRH) Rn1 (RO=1); experimentell wird in der Literatur aber von RO größer 2 berichtet wofür zwei Erklärungen existieren. 1.: Es gibt Fallenzustände für Ladungsträger in den entsprechenden separaten Phasen, d.h. Elektronen in der Akzeptorphase und Löcher in der Donatorphase, was in einer verzögerten Rekombination der Ladungsträger an der Grenzfläche beider Phasen führt und damit zu einer höheren RO als 2. 2.: Die erhöhte R(n)-Abhängigkeit wird dem sogenannten Rekombinationsvorfaktor zugeschrieben, welcher wiederum von der n-abhängigen Mobilität µ abhängt. Es wird gezeigt, dass für das System P3HT:PC61BM bei Raumtemperatur der µ(n) Verlauf fast komplett die erhöhte RO erklären kann, allerding nicht bei tieferen Temperaturen welches dort die erste Erklärung stützt. Im Materialsystem PTB7:PC71BM ist schon für Raumtemperatur die erhöhte RO nicht durch den µ(n) Verlauf erklärbar. Um zu untermauern, dass Störstellen in Kombination mit einer Phasenseparation für die erhöhte RO verantwortlich sind, wurden Störstellen in Solarzellen eingebaut um deren Einfluss auf die Rekombinationsmechanismen zu untersuchen. Dazu wurden P3HT:PC61BM Solarzellen zum einen synthetischer Luft ausgesetzt (im Dunkeln und unter Beleuchtung) zum anderen der aktiven Schicht in geringen Konzentrationen TCNQ beigefügt, welches als Elektronenstörstelle fungiert. Für die O2 degradierte Solarzelle wird die RO aus einer Kombination von Voc-Transienten und Voc(n) Messungen bestimmt. Dabei kann mit erhöhter Degradation ein kontinuierlicher Anstieg der RO von 2.4 auf mehr als 5 beobachtet werden. Durch die Auswertung des Idealitätsfaktors kann gezeigt werden, dass der Einfluss der SRH Rekombination in Relation zur Langevin Rekombination mit erhöhter Störstellenkonzentration zunimmt. Ein ähnliches Bild ergibt sich für die Solarzellen mit TCNQ als extrinsische Störstellen. Zuletzt wird das Phänomen s-förmiger Strom-Spannungs-Kennlinien untersucht, welches manchmal für Solarzellen unter Beleuchtung auftritt. Als Ursache kann eine reduzierte Oberflächenrekombinationsgeschwindigkeit ausgemacht werden. Experimentell wurden die Solarzellen mit einer speziellen Plasmabehandlung des ITO Kontaktes hergestellt. Die gemessenen IV-Kennlinien solcher Solarzellen können anhand von makroskopischen Simulationen nachgebildet werden, indem darin die Oberflächenrekombinationsgeschwindigkeit reduziert wird, wobei man dabei die Oberflächenrekombination von Majoritäts- bzw. Minoritätsladungsträgern an den entsprechenden Kontakten unterscheiden muss. Experimentell untermauert werden kann die Theorie anhand von lichtleistungsabhängigen IV-Kurven bzw. Transienten der Kurzschlussstromdichte und der Leerlaufspannung. KW - Organische Solarzelle KW - organische Solarzellen KW - Leerlaufspannung KW - Störstellen KW - recombination KW - organic solar cells KW - open circuit voltage KW - trap states KW - Fotovoltaik KW - Organischer Halbleiter KW - Rekombination Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-90083 ER - TY - THES A1 - Summa, Alexander T1 - Modelling high-energy observables of supernova explosions T1 - Modellierung hochenergetischer Beobachtungsgrößen von Supernova-Explosionen N2 - In this work, high-energy observables arising during different phases of SN explosions are studied with respect to their potential for allowing conclusions on suggested explosion scenarios and physical mechanisms that are thought to influence the evolution of SNe in a major way. The focus on selected observables at keV and MeV energies is motivated by the appearance of large degeneracies that can even be found for disparate scenarios in many wavelength regimes. Since the discussed emission in the high-energy regime is directly linked to nuclear processes being usually very distinct for different suggested physical models, the signatures at keV and MeV energies allow for meaningful comparisons of simulations with observations. N2 - In der vorliegenden Arbeit werden Hochenergie-Beobachtungsgrößen, die während verschiedener Phasen von Supernova-Explosionen entstehen, hinsichtlich der Möglichkeit von Rückschlüssen auf vorgeschlagene Explosionsszenarien und physikalische Mechanismen, welche einen wichtigen Einfluss auf die Entwicklung dieser Explosionen ausüben, untersucht. Die Schwerpunktsetzung auf Beobachtungsgrößen im keV- und MeV-Energiebereich ist dabei durch die großen Ähnlichkeiten begründet, die grundverschiedene Szenarien in ihrer Emission in vielen Wellenlängenbereichen zeigen. Da die diskutierten Beobachtungsgrößen im Hochenergie-Bereich direkt mit nuklearen Prozessen verknüpft sind, die bei unterschiedlichen physikalischen Modellen sehr charakteristisch ausgeprägt sein können, eignen sich gerade die vorgestellten Signaturen im keV- und MeV-Bereich für aussagekräftige Vergleiche von Simulationen und Beobachtungen. KW - Supernova KW - Hochenergieastronomie KW - supernovae KW - nucleosynthesis KW - gamma rays KW - X-rays KW - cosmic rays KW - Nukleosynthese KW - Gammastrahlung KW - Röntgenstrahlung KW - Kosmische Strahlung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-94608 ER - TY - JOUR T1 - Search for squarks and gluinos in final states with same-sign leptons and jets using 139 fb\(^{-1}\) of data collected with the ATLAS detector JF - Journal of High Energy Physics N2 - A search for supersymmetric partners of gluons and quarks is presented, involving signatures with jets and either two isolated leptons (electrons or muons) with the same electric charge, or at least three isolated leptons. A data sample of proton-proton collisions at root s = 13 TeV recorded with the ATLAS detector at the Large Hadron Collider between 2015 and 2018, corresponding to a total integrated luminosity of 139 fb(-1), is used for the search. No significant excess over the Standard Model expectation is observed. The results are interpreted in simplified supersymmetric models featuring both R-parity conservation and R-parity violation, raising the exclusion limits beyond those of previous ATLAS searches to 1600 GeV for gluino masses and 750 GeV for bottom and top squark masses in these scenarios. KW - Hadron-Hadron scattering (experiments) KW - Supersymmetry Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-277538 IS - 6 ER - TY - JOUR T1 - A measurement of the calorimeter response to single hadrons and determination of the jet energy scale uncertainty using LHC Run-1 \(pp\)-collision data with the ATLAS detector JF - European Physical Journal C N2 - A measurement of the calorimeter response to isolated charged hadrons in the ATLAS detector at the LHC is presented. This measurement is performed with 3.2 nb\(^{−1}\) of proton–proton collision data at \(\sqrt{s}\) = 7 TeV from 2010 and 0.1 nb\(^{−1}\) of data at \(\sqrt{s}\) = 8 TeV from 2012. A number of aspects of the calorimeter response to isolated hadrons are explored. After accounting for energy deposited by neutral particles, there is a 5% discrepancy in the modelling, using various sets of GEANT4 hadronic physics models, of the calorimeter response to isolated charged hadrons in the central calorimeter region. The description of the response to anti-protons at low momenta is found to be improved with respect to previous analyses. The electromagnetic and hadronic calorimeters are also examined separately, and the detector simulation is found to describe the response in the hadronic calorimeter well. The jet energy scale uncertainty and correlations in scale between jets of different momenta and pseudorapidity are derived based on these studies. The uncertainty is 2–5% for jets with transverse momenta above 2 TeV, where this method provides the jet energy scale uncertainty for ATLAS. KW - high energy physics KW - ATLAS detector KW - hadronic calorimeter KW - charged hadron response KW - identified particle response KW - hadronic physics Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173690 VL - 77 IS - 26 ER - TY - JOUR A1 - Aeschlimann, Martin A1 - Brixner, Tobias A1 - Cinchetti, Mirko A1 - Frisch, Benjamin A1 - Hecht, Bert A1 - Hensen, Matthias A1 - Huber, Bernhard A1 - Kramer, Christian A1 - Krauss, Enno A1 - Loeber, Thomas H. A1 - Pfeiffer, Walter A1 - Piecuch, Martin A1 - Thielen, Philip T1 - Cavity-assisted ultrafast long-range periodic energy transfer between plasmonic nanoantennas JF - Light: Science & Applications N2 - Radiationless energy transfer is at the core of diverse phenomena, such as light harvesting in photosynthesis\(^1\), energy-transfer-based microspectroscopies\(^2\), nanoscale quantum entanglement\(^3\) and photonic-mode hybridization\(^4\). Typically, the transfer is efficient only for separations that are much shorter than the diffraction limit. This hampers its application in optical communication and quantum information processing, which require spatially selective addressing. Here, we demonstrate highly efficient radiationless coherent energy transfer over a distance of twice the excitation wavelength by combining localized and delocalized\(^5\) plasmonic modes. Analogous to the Tavis-Cummings model, two whispering-gallery-mode antennas\(^6\) placed in the foci of an elliptical plasmonic cavity\(^7\) fabricated from single-crystal gold plates act as a pair of oscillators coupled to a common cavity mode. Time-resolved two-photon photoemission electron microscopy (TR 2P-PEEM) reveals an ultrafast long-range periodic energy transfer in accordance with the simulations. Our observations open perspectives for the optimization and tailoring of mesoscopic energy transfer and long-range quantum emitter coupling. KW - chemistry KW - nanocavities KW - nanophotonics and plasmonics KW - photonic devices Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173265 VL - 6 ER - TY - RPRT A1 - Groß, Lennart T1 - Advices derived from troubleshooting a sensor-based adaptive optics direct stochastic optical reconstruction microscope T1 - Hinweise aus der Fehleranalyse eines Mikroskops mit direkter stochastischer optischer Rekonstruktion und sensorgestützter adaptiver Optik N2 - One rarely finds practical guidelines for the implementation of complex optical setups. Here, we aim to provide technical details on the decision making of building and revising a custom sensor-based adaptive optics (AO) direct stochastic optical reconstruction microscope (dSTORM) to provide practical assistance in setting up or troubleshooting similar devices. The foundation of this report is an instrument constructed as part of a master's thesis in 2021, which was built for deep tissue imaging. The setup is presented in the following way: (1) An optical and mechanical overview of the system at the beginning of this internship is given. (2) The optical components are described in detail in the order at which the light passes through, highlighting their working principle and implementation in the system. The optical component include (2A) a focus on even sample illumination, (2B) restoring telecentricity when working with commercial microscope bodies, (2C) the AO elements, namely the deformable mirror (DM) and the wavefront sensor, and their integration, and (2D) the separation of wavefront and image capture using fluorescent beads and a dichroic mirror. After addressing the limitations of the existing setup, modification options are derived. The modifications include the implementation of adjustment only light paths to improve system stability and revise the degrees of freedom of the components and changes in lens choices to meet the specifications of the AO components. Last, the capabilities of the modified setup are presented and discussed: (1) First, we enable epifluorescence imaging of bead samples through 180 µm unstained murine hippocampal tissue with wavefront error correction of ~ 90 %. Point spread function, wavefront shape and Zernike decomposition of bead samples are presented. (2) Second, we move from epifluorescent to dSTORM imaging of tubulin stained primary mouse hippocampal cells, which are imaged through up to 180 µm of unstained murine hippocampal tissue. We show that full width at half maximum (FWHM) of prominent features can be reduced in size by nearly a magnitude from uncorrected epiflourescence images to dSTORM images corrected by the adaptive optics. We present dSTORM localization count and FWHM of prominent features as as a function of imaging depth. N2 - Praktische Leitlinien für die Implementierung komplexer optischer Systeme sind selten zu finden. Hier wollen wir technische Details zur Entscheidungsfindung beim Bau und der Überarbeitung eines maßgefertigten Mikroskops mit sensorgestützter adaptiver Optik (AO) und direkter stochastischer optischer Rekonstruktion (dSTORM) bereitstellen, um praktische Hilfestellung bei der Einrichtung oder Fehlerbehebung ähnlicher Geräte zu geben. Grundlage dieses Berichts ist ein Instrument, das im Rahmen einer Masterarbeit im Jahr 2021 für die Abbildung von tiefem Gewebe gebaut wurde. Der Aufbau wird wie folgt dargestellt: (1) Es wird ein optischer und mechanischer Überblick über das System zu Beginn dieses Praktikums gegeben. (2) Die optischen Komponenten werden in der Reihenfolge, in der das Licht sie durchläuft, detailliert beschrieben und ihre Funktionsweise und Umsetzung im System hervorgehoben. Zu den optischen Komponenten gehören (2A) ein Fokus auf gleichmäßige Probenausleuchtung, (2B) die Wiederherstellung der Telezentrizität bei der Arbeit mit handelsüblichen Mikroskopkörpern, (2C) die AO-Elemente, nämlich der deformierbare Spiegel (DM) und der Wellenfrontsensor, und deren Integration, sowie (2D) die Trennung von Wellenfront- und Bilderfassung mittels fluoreszierender Beads und einem dichroitischen Spiegel. Nachdem die Einschränkungen des bestehenden Aufbaus angesprochen wurden, werden Modifikationsmöglichkeiten abgeleitet. Die Modifikationen umfassen die Implementierung von Justage-Lichtpfaden, um die Systemstabilität zu verbessern und die Freiheitsgrade der Komponenten zu überarbeiten, sowie Änderungen bei der Auswahl der Linsen, um die Spezifikationen der AO-Komponenten zu erfüllen. Abschließend werden die Ergebnisse des modifizierten Aufbaus vorgestellt und diskutiert: (1) Zunächst ermöglichen wir die Epifluoreszenz-Abbildung von Bead-Proben durch 180 µm ungefärbtes Hippocampus-Gewebe der Maus mit einer Wellenfront-Fehlerkorrektur von ~ 90 %. Es werden Punktspreizungsfunktion, Wellenfrontform und Zernike-Zerlegung von Bead-Proben vorgestellt. (2) Zweitens gehen wir von der Epifluoreszenz zur dSTORM-Bildgebung von Tubulin-gefärbten primären Hippocampuszellen der Maus über, die durch bis zu 180 µm ungefärbtes Hippocampusgewebe der Maus abgebildet werden. Wir zeigen, dass die Halbwertsbreite (Full Width at Half Maximum, FWHM) auffälliger Merkmale von unkorrigierten Epifloureszenz-Bildern zu dSTORM-Bildern, die durch die adaptive Optik korrigiert wurden, um fast eine Größenordnung reduziert werden kann. Wir präsentieren die Anzahl der dSTORM-Lokalisierungen und die FWHM auffälliger Merkmale als Funktion der Abbildungstiefe. KW - Einzelmolekülmikroskopie KW - Adaptive Optik KW - Adaptive Optics KW - Single Molecule Localization Microscopy KW - dSTORM Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-289951 ER - TY - JOUR T1 - Search for triboson \({W^\pm}{W^\pm}{W^\mp}\) production in \(pp\) collisions at \(\sqrt{s}\) = 8 TeV with the ATLAS detector JF - European Physical Journal C N2 - This paper reports a search for triboson \({W^\pm}{W^\pm}{W^\mp}\) production in two decay channels (\({W^\pm}{W^\pm}{W^\mp}\) → \({ℓ^\pm}{νℓ^\pm}{νℓ^\mp}{ν}\) and \({W^\pm}{W^\pm}{W^\mp}\) → \({ℓ^\pm}{νℓ^\pm}{νjj}\) with \(ℓ=e,μ\)) in proton-proton collision data corresponding to an integrated luminosity of 20.3 fb\(^{−1}\) at a centre-of-mass energy of 8 TeV with the ATLAS detector at the Large Hadron Collider. Events with exactly three charged leptons, or two leptons with the same electric charge in association with two jets, are selected. The total number of events observed in data is consistent with the Standard Model (SM) predictions. The observed 95% confidence level upper limit on the SM \({W^\pm}{W^\pm}{W^\mp}\) production cross section is found to be 730 fb with an expected limit of 560 fb in the absence of SM \({W^\pm}{W^\pm}{W^\mp}\) production. Limits are also set on \(WWWW\) anomalous quartic gauge couplings. KW - high energy physics KW - triboson production KW - triple gauge couplings (TGCs) KW - quartic gauge couplings (QGCs) KW - decay channels Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173710 VL - 77 IS - 141 ER - TY - JOUR T1 - Measurements of charge and CP asymmetries in \(b\)-hadron decays using top-quark events collected by the ATLAS detector in \(pp\) collisions at \(\sqrt{s}\) = 8 TeV JF - Journal of High Energy Physics N2 - Same- and opposite-sign charge asymmetries are measured in lepton+jets \({t\overline{t}}\) events in which a \(b\)-hadron decays semileptonically to a soft muon, using data corresponding to an integrated luminosity of 20.3 fb\(^{−1}\) from proton-proton collisions at a centre-of-mass energy of \(\sqrt{s}\) = 8 TeV collected with the ATLAS detector at the Large Hadron Collider at CERN. The charge asymmetries are based on the charge of the lepton from the top-quark decay and the charge of the soft muon from the semileptonic decay of a \(b\)-hadron and are measured in a fiducial region corresponding to the experimental acceptance. Four CP asymmetries (one mixing and three direct) are measured and are found to be compatible with zero and consistent with the Standard Model. KW - High energy physics KW - Hadron-Hadron scattering (experiments) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173603 VL - 2017 IS - 02 ER - TY - JOUR T1 - Measurement of \(b\)-hadron pair production with the ATLAS detector in proton-proton collisions at \(\sqrt{s}=8\) TeV JF - Journal of High Energy Physics N2 - A measurement of \(b\)-hadron pair production is presented, based on a data set corresponding to an integrated luminosity of 11.4 fb\(^{−1}\) of proton-proton collisions recorded at \(\sqrt{s}=8\) TeV with the ATLAS detector at the LHC. Events are selected in which a \(b\)-hadron is reconstructed in a decay channel containing \(J/ψ → μμ\), and a second \(b\)-hadron is reconstructed in a decay channel containing a muon. Results are presented in a fiducial volume defined by kinematic requirements on three muons based on those used in the analysis. The fiducial cross section is measured to be 17.7 ± 0.1(stat.) ± 2.0(syst.) nb. A number of normalised differential cross sections are also measured, and compared to predictions from the PHYTHIA8, HERWIG++, MADGRAPH5_AMC@NLO+PYTHIA8 and SHERPA event generators, providing new constraints on heavy flavour production. KW - High energy physics KW - B physics KW - Hadron-Hadron scattering (experiments) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-172414 VL - 2017 IS - 11 ER - TY - JOUR T1 - Evidence for the \(H\) → \({b\overline{b}}\) decay with the ATLAS detector JF - Journal of High Energy Physics N2 - A search for the decay of the Standard Model Higgs boson into a \({b\overline{b}}\) pair when produced in association with a \(W\) or \(Z\) boson is performed with the ATLAS detector. The analysed data, corresponding to an integrated luminosity of 36.1 fb\(^{−1}\), were collected in proton-proton collisions in Run 2 of the Large Hadron Collider at a centre-of-mass energy of 13 TeV. Final states containing zero, one and two charged leptons (electrons or muons) are considered, targeting the decays \(Z\) → \({νν}\), \(W\) → \({ℓν}\) and \(Z\) → \({ℓℓ}\). For a Higgs boson mass of 125 GeV, an excess of events over the expected background from other Standard Model processes is found with an observed significance of 3.5 standard deviations, compared to an expectation of 3.0 standard deviations. This excess provides evidence for the Higgs boson decay into b-quarks and for its production in association with a vector boson. The combination of this result with that of the Run 1 analysis yields a ratio of the measured signal events to the Standard Model expectation equal to 0.90 ± 0.18(stat.)\(^{+0.21}_{−0.19}\)(syst.). Assuming the Standard Model production cross-section, the results are consistent with the value of the Yukawa coupling to \(b\)-quarks in the Standard Model. KW - High energy physics KW - Hadron-Hadron scattering (experiments) KW - Higgs physics Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-172216 VL - 24 ER - TY - JOUR T1 - Probing the \(W tb\) vertex structure in \(t\)-channel single-top-quark production and decay in \(pp\) collisions at \(\sqrt{s}\) = 8 TeV with the ATLAS detector JF - Journal of High Energy Physics N2 - To probe the \(W tb\) vertex structure, top-quark and \(W\)-boson polarisation observables are measured from \(t\)-channel single-top-quark events produced in proton-proton collisions at a centre-of-mass energy of 8 TeV. The dataset corresponds to an integrated luminosity of 20.2 fb\(^{−1}\), recorded with the ATLAS detector at the LHC. Selected events contain one isolated electron or muon, large missing transverse momentum and exactly two jets, with one of them identified as likely to contain a \(b\)-hadron. Stringent selection requirements are applied to discriminate \(t\)-channel single-top-quark events from background. The polarisation observables are extracted from asymmetries in angular distributions measured with respect to spin quantisation axes appropriately chosen for the top quark and the \(W\) boson. The asymmetry measurements are performed at parton level by correcting the observed angular distributions for detector effects and hadronisation after subtracting the background contributions. The measured top-quark and \(W\)-boson polarisation values are in agreement with the Standard Model predictions. Limits on the imaginary part of the anomalous coupling \(g_R\) are also set from model independent measurements. KW - High energy physics KW - Hadron-Hadron scattering (experiments) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173234 VL - 2017 IS - 04 ER - TY - JOUR T1 - Measurement of the \(k_t\) splitting scales in \(Z → ℓℓ\) events in \(pp\) collisions at \(\sqrt{s}=8\) TeV with the ATLAS detector JF - Journal of High Energy Physics N2 - A measurement of the splitting scales occuring in the \(k_t\) jet-clustering algorithm is presented for final states containing a \(Z\) boson. The measurement is done using 20.2 fb\(^{−1}\) of proton-proton collision data collected at a centre-of-mass energy of \(\sqrt{s} = 8\) TeV by the ATLAS experiment at the LHC in 2012. The measurement is based on charged-particle track information, which is measured with excellent precision in the \(p_T\) region relevant for the transition between the perturbative and the non-perturbative regimes. The data distributions are corrected for detector effects, and are found to deviate from state-of-the-art predictions in various regions of the observables. KW - High energy physics KW - Hadron Hadron scattering (experiments) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173180 VL - 2017 IS - 08 ER - TY - JOUR T1 - Measurements of top-quark pair to \(Z\)-boson cross-section ratios at \(\sqrt{s}\) \(=13 , 8, 7\) TeV with the ATLAS detector JF - Journal of High Energy Physics N2 - Ratios of top-quark pair to \(Z\)-boson cross sections measured from proton-proton collisions at the LHC centre-of-mass energies of \(\sqrt{s}\) = 13 TeV, 8 TeV, and 7 TeV are presented by the ATLAS Collaboration. Single ratios, at a given \(\sqrt{s}\) for the two processes and at different \(\sqrt{s}\) for each process, as well as double ratios of the two processes at different \(\sqrt{s}\), are evaluated. The ratios are constructed using previously published ATLAS measurements of the \({t\overline{t}}\) and \(Z\)-boson production cross sections, corrected to a common phase space where required, and a new analysis of \(Z\) → ℓ\(^+\)ℓ\(^-\) where ℓ = \(e, µ\) at \(\sqrt{s}\) = 13 TeV performed with data collected in 2015 with an integrated luminosity of 3.2 fb\(^−1\). Correlations of systematic uncertainties are taken into account when evaluating the uncertainties in the ratios. The correlation model is also used to evaluate the combined cross section of the \(Z\) → \(e\)\(^+\)\(e\)\(^−\) and the \(Z\) → \(µ\)\(^+\)\(µ\)\(^−\) channels for each \(\sqrt{s}\) value. The results are compared to calculations performed at next-to-next-to-leading-order accuracy using recent sets of parton distribution functions. The data demonstrate significant power to constrain the gluon distribution function for the Bjorken-\(x\) values near 0.1 and the light-quark sea for \(x\) < 0.02. KW - High energy physics KW - Hadron-Hadron scattering (experiments) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173544 VL - 2017 IS - 02 ER - TY - JOUR T1 - Measurement of the \(ZZ\) production cross section in proton-proton collisions at \(\sqrt{s}\) = 8 TeV using the \(ZZ\) → \(ℓ^−ℓ^+ℓ^{′−}ℓ^{′+}\) and \(ZZ\) → \(ℓ^−ℓ^+{ν\overline{ν}}\) decay channels with the ATLAS detector JF - Journal of High Energy Physics N2 - A measurement of the \(ZZ\) production cross section in the \(ℓ^−ℓ^+ℓ^{′−}ℓ^{′+}\) and \(ℓ^−ℓ^+{ν\overline{ν}}\) channels (ℓ = e, µ) in proton-proton collisions at \(\sqrt{s}\) = 8TeV at the Large Hadron Collider at CERN, using data corresponding to an integrated luminosity of 20.3 fb\(^{−1}\) collected by the ATLAS experiment in 2012 is presented. The fiducial cross sections for \(ZZ\) → \(ℓ^−ℓ^+ℓ^{′−}ℓ^{′+}\) and \(ZZ\) → \(ℓ^−ℓ^+{ν\overline{ν}}\) are measured in selected phase-space regions. The total cross section for \(ZZ\) events produced with both \(Z\) bosons in the mass range 66 to 116GeV is measured from the combination of the two channels to be 7.3 ± 0.4(stat) ± 0.3 (syst)\(^{−0.2}_{−0.1}\) (lumi) pb, which is consistent with the Standard Model prediction of 6.6\(^{+0.7}_{−0.6}\) pb. The differential cross sections in bins of various kinematic variables are presented. The differential event yield as a function of the transverse momentum of the leading \(Z\) boson is used to set limits on anomalous neutral triple gauge boson couplings in \(ZZ\) production. KW - high energy physics KW - Hadron-Hadron scattering (experiments) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173616 VL - 2017 IS - 99 ER - TY - JOUR T1 - Measurement of the \({t\overline{t}}Z\) and \({t\overline{t}}W\) production cross sections in multilepton final states using 3.2 fb\(^{-1}\) of \(pp\) collisions at \(\sqrt{s}\) = 13 TeV with the ATLAS detector JF - European Physical Journal C N2 - A measurement of the \({t\overline{t}}Z\) and \({t\overline{t}}W\) production cross sections in final states with either two same-charge muons, or three or four leptons (electrons or muons) is presented. The analysis uses a data sample of proton–proton collisions at \(\sqrt{s}\) = 13 TeV recorded with the ATLAS detector at the Large Hadron Collider in 2015, corresponding to a total integrated luminosity of 3.2 fb\(^{−1}\). The inclusive cross sections are extracted using likelihood fits to signal and control regions, resulting in \(\sigma_{{t\overline{t}}Z}\) = 0.9 ± 0.3 pb and \(\sigma_{{t\overline{t}}W}\) = 1.5 ± 0.8 pb, in agreement with the Standard Model predictions. KW - high energy physics KW - experimental physics KW - Hadron-Hadron scattering (experiments) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173662 VL - 77 IS - 40 ER - TY - JOUR T1 - Studies of \(Zγ\) production in association with a high-mass dijet system in \(pp\) collisions at \(\sqrt{s}\) = 8 TeV with the ATLAS detector JF - Journal of High Energy Physics N2 - The production of a \(Z\) boson and a photon in association with a high-mass dijet system is studied using 20.2 fb\(^{−1}\) of proton-proton collision data at a centre-of-mass energy of \(\sqrt{s}\) = 8 TeV recorded with the ATLAS detector in 2012 at the Large Hadron Collider. Final states with a photon and a Z boson decaying into a pair of either electrons, muons, or neutrinos are analysed. Electroweak and total \(pp\) → \(Zγjj\) cross-sections are extracted in two fiducial regions with different sensitivities to electroweak production processes. Quartic couplings of vector bosons are studied in regions of phase space with an enhanced contribution from pure electroweak production, sensitive to vector-boson scattering processes \(V V → Zγ\). No deviations from Standard Model predictions are observed and constraints are placed on anomalous couplings parameterized by higher-dimensional operators using effective field theory. KW - High energy physics KW - Electroweak interaction KW - Hadron-Hadron scattering (experiments) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173229 VL - 2017 IS - 07 ER - TY - JOUR A1 - Hoffmann, Angelika A1 - Pfeil, Johannes A1 - Alfonso, Julieta A1 - Kurz, Felix T. A1 - Sahm, Felix A1 - Heiland, Sabine A1 - Monyer, Hannah A1 - Bendszus, Martin A1 - Mueller, Ann-Kristin A1 - Helluy, Xavier A1 - Pham, Mirko T1 - Experimental Cerebral Malaria Spreads along the Rostral Migratory Stream JF - PLoS Pathogens N2 - It is poorly understood how progressive brain swelling in experimental cerebral malaria (ECM) evolves in space and over time, and whether mechanisms of inflammation or microvascular sequestration/obstruction dominate the underlying pathophysiology. We therefore monitored in the Plasmodium berghei ANKA-C57BL/6 murine ECM model, disease manifestation and progression clinically, assessed by the Rapid-Murine-Coma-and-Behavioral-Scale (RMCBS), and by high-resolution in vivo MRI, including sensitive assessment of early blood-brain-barrier-disruption (BBBD), brain edema and microvascular pathology. For histological correlation HE and immunohistochemical staining for microglia and neuroblasts were obtained. Our results demonstrate that BBBD and edema initiated in the olfactory bulb (OB) and spread along the rostral-migratory-stream (RMS) to the subventricular zone of the lateral ventricles, the dorsal-migratory-stream (DMS), and finally to the external capsule (EC) and brainstem (BS). Before clinical symptoms (mean RMCBS = 18.5±1) became evident, a slight, non-significant increase of quantitative T2 and ADC values was observed in OB+RMS. With clinical manifestation (mean RMCBS = 14.2±0.4), T2 and ADC values significantly increased along the OB+RMS (p = 0.049/p = 0.01). Severe ECM (mean RMCBS = 5±2.9) was defined by further spread into more posterior and deeper brain structures until reaching the BS (significant T2 elevation in DMS+EC+BS (p = 0.034)). Quantitative automated histological analyses confirmed microglial activation in areas of BBBD and edema. Activated microglia were closely associated with the RMS and neuroblasts within the RMS were severely misaligned with respect to their physiological linear migration pattern. Microvascular pathology and ischemic brain injury occurred only secondarily, after vasogenic edema formation and were both associated less with clinical severity and the temporal course of ECM. Altogether, we identified a distinct spatiotemporal pattern of microglial activation in ECM involving primarily the OB+RMS axis, a distinct pathway utilized by neuroblasts and immune cells. Our data suggest significant crosstalk between these two cell populations to be operative in deeper brain infiltration and further imply that the manifestation and progression of cerebral malaria may depend on brain areas otherwise serving neurogenesis. KW - experimental cerebral malaria KW - rostral-migratory-stream KW - brain swelling Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-167434 VL - 12 IS - 3 ER - TY - JOUR A1 - Kochereshko, Vladimir P. A1 - Durnev, Mikhail V. A1 - Besombes, Lucien A1 - Mariette, Henri A1 - Sapega, Victor F. A1 - Askitopoulos, Alexis A1 - Savenko, Ivan G. A1 - Liew, Timothy C. H. A1 - Shelykh, Ivan A. A1 - Platonov, Alexey V. A1 - Tsintzos, Simeon I. A1 - Hatzopoulos, Z. A1 - Savvidis, Pavlos G. A1 - Kalevich, Vladimir K. A1 - Afanasiev, Mikhail M. A1 - Lukoshkin, Vladimir A. A1 - Schneider, Christian A1 - Amthor, Matthias A1 - Metzger, Christian A1 - Kamp, Martin A1 - Hoefling, Sven A1 - Lagoudakis, Pavlos A1 - Kavokin, Alexey T1 - Lasing in Bose-Fermi mixtures JF - Scientific Reports N2 - Light amplification by stimulated emission of radiation, well-known for revolutionising photonic science, has been realised primarily in fermionic systems including widely applied diode lasers. The prerequisite for fermionic lasing is the inversion of electronic population, which governs the lasing threshold. More recently, bosonic lasers have also been developed based on Bose-Einstein condensates of exciton-polaritons in semiconductor microcavities. These electrically neutral bosons coexist with charged electrons and holes. In the presence of magnetic fields, the charged particles are bound to their cyclotron orbits, while the neutral exciton-polaritons move freely. We demonstrate how magnetic fields affect dramatically the phase diagram of mixed Bose-Fermi systems, switching between fermionic lasing, incoherent emission and bosonic lasing regimes in planar and pillar microcavities with optical and electrical pumping. We collected and analyzed the data taken on pillar and planar microcavity structures at continuous wave and pulsed optical excitation as well as injecting electrons and holes electronically. Our results evidence the transition from a Bose gas to a Fermi liquid mediated by magnetic fields and light-matter coupling. KW - Bose-Fermi KW - magnetic fields KW - Bose gas KW - Fermi liquid KW - light-matter coupling Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-168152 VL - 6 IS - 20091 ER - TY - JOUR T1 - Search for pair production of heavy vector-like quarks decaying to high-\(p_T\) \(W\) bosons and \(b\) quarks in the lepton-plus-jets final state in \(pp\) collisions at \(\sqrt{s}=13\) TeV with the ATLAS detector JF - Journal of High Energy Physics N2 - A search is presented for the pair production of heavy vector-like \(T\) quarks, primarily targeting the \(T\) quark decays to a \(W\) boson and a \(b\)-quark. The search is based on 36.1 fb\(^{−1}\) of \(pp\) collisions at \(\sqrt{s}=13\) TeV recorded in 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider. Data are analysed in the lepton-plus-jets final state, including at least one \(b\)-tagged jet and a large-radius jet identified as originating from the hadronic decay of a high-momentum \(W\) boson. No significant deviation from the Standard Model expectation is observed in the reconstructed \(T\) mass distribution. The observed 95% confidence level lower limit on the \(T\) mass are 1350 GeV assuming 100% branching ratio to \(Wb\). In the SU(2) singlet scenario, the lower mass limit is 1170 GeV. This search is also sensitive to a heavy vector-like \(B\) quark decaying to \(Wt\) and other final states. The results are thus reinterpreted to provide a 95% confidence level lower limit on the \(B\) quark mass at 1250 GeV assuming 100% branching ratio to \(Wt\); in the SU(2) singlet scenario, the limit is 1080 GeV. Mass limits on both \(T\) and \(B\) production are also set as a function of the decay branching ratios. The 100% branching ratio limits are found to be applicable to heavy vector-like \(Y\) and \(X\) production that decay to \(Wb\) and \(Wt\), respectively. KW - High energy physics KW - Exotics KW - Hadron-Hadron scattering (experiments) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-172472 VL - 2017 IS - 141 ER - TY - JOUR T1 - Search for new high-mass phenomena in the dilepton final state using 36 fb\(^{−1}\) of proton-proton collision data at \(\sqrt{s}=13\) TeV with the ATLAS detector JF - Journal of High Energy Physics N2 - A search is conducted for new resonant and non-resonant high-mass phenomena in dielectron and dimuon final states. The search uses 36.1 fb\(^{−1}\) of proton-proton collision data, collected at \(\sqrt{s}=13\) TeV by the ATLAS experiment at the LHC in 2015 and 2016. No significant deviation from the Standard Model prediction is observed. Upper limits at 95% credibility level are set on the cross-section times branching ratio for resonances decaying into dileptons, which are converted to lower limits on the resonance mass, up to 4.1 TeV for the E\(_6\)-motivated \(Z^′_χ\). Lower limits on the \({qqℓℓ}\) contact interaction scale are set between 2.4 TeV and 40 TeV, depending on the model. KW - High energy physics KW - Beyond Standard Model KW - Hadron-Hadron scattering (experiments) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-172462 VL - 2017 IS - 182 ER - TY - JOUR T1 - Measurement of the inclusive jet cross-sections in proton-proton collisions at \(\sqrt{s}=8\) TeV with the ATLAS detector JF - Journal of High Energy Physics N2 - Inclusive jet production cross-sections are measured in proton-proton collisions at a centre-of-mass energy of \(\sqrt{s} = 8\) TeV recorded by the ATLAS experiment at the Large Hadron Collider at CERN. The total integrated luminosity of the analysed data set amounts to 20.2 fb\(^{−1}\). Double-differential cross-sections are measured for jets defined by the anti-\(k_t\) jet clustering algorithm with radius parameters of \(R\) = 0.4 and \(R\) = 0.6 and are presented as a function of the jet transverse momentum, in the range between 70 GeV and 2.5 TeV and in six bins of the absolute jet rapidity, between 0 and 3.0. The measured cross-sections are compared to predictions of quantum chromodynamics, calculated at next-to-leading order in perturbation theory, and corrected for non-perturbative and electroweak effects. The level of agreement with predictions, using a selection of different parton distribution functions for the proton, is quantified. Tensions between the data and the theory predictions are observed. KW - High energy physics KW - Hadron-Hadron scattering (experiments) KW - Jet physics Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173123 VL - 2017 IS - 09 ER - TY - JOUR T1 - Search for direct top squark pair production in events with a Higgs or \(Z\) boson, and missing transverse momentum in \(\sqrt{s}\) = 13 TeV \(pp\) collisions with the ATLAS detector JF - Journal of High Energy Physics N2 - A search for direct top squark pair production resulting in events with either a same-flavour opposite-sign dilepton pair with invariant mass compatible with a \(Z\) boson or a pair of jets compatible with a Standard Model (SM) Higgs boson (\(h\)) is presented. Requirements on the missing transverse momentum, together with additional selections on leptons, jets, jets identified as originating from \(b\)-quarks are imposed to target the other decay products of the top squark pair. The analysis is performed using proton-proton collision data at \(\sqrt{s}\) = 13 TeV collected with the ATLAS detector at the LHC in 2015–2016, corresponding to an integrated luminosity of 36.1 fb\(^{-1}\). No excess is observed in the data with respect to the SM predictions. The results are interpreted in two sets of models. In the first set, direct production of pairs of lighter top squarks (\(\tilde{t}_1\)) with long decay chains involving \(Z\) or Higgs bosons is considered. The second set includes direct pair production of the heavier top squark pairs (\(\tilde{t}_2\)) decaying via \(\tilde{t}_2\) → \(Z\tilde{t}_1\) or \(\tilde{t}_2\) → \(h\tilde{t}_1\). The results exclude at 95% confidence level \(\tilde{t}_2\) and \(\tilde{t}_1\) masses up to about 800 GeV, extending the exclusion region of supersymmetric parameter space covered by previous LHC searches. KW - High energy physics KW - Beyond Standard Model KW - Hadron-Hadron scattering (experiments) KW - Higgs physics Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173210 VL - 2017 IS - 08 ER - TY - JOUR A1 - Ullherr, Maximilian A1 - Diez, Matthias A1 - Zabler, Simon T1 - Robust image reconstruction strategy for multiscalar holotomography JF - Journal of Imaging N2 - Holotomography is an extension of computed tomography where samples with low X-ray absorption can be investigated with higher contrast. In order to achieve this, the imaging system must yield an optical resolution of a few micrometers or less, which reduces the measurement area (field of view = FOV) to a few mm at most. If the sample size, however, exceeds the field of view (called local tomography or region of interest = ROI CT), filter problems arise during the CT reconstruction and phase retrieval in holotomography. In this paper, we will first investigate the practical impact of these filter problems and discuss approximate solutions. Secondly, we will investigate the effectiveness of a technique we call “multiscalar holotomography”, where, in addition to the ROI CT, a lower resolution non-ROI CT measurement is recorded. This is used to avoid the filter problems while simultaneously reconstructing a larger part of the sample, albeit with a lower resolution in the additional area. KW - reconstruction KW - region of interest KW - ROI KW - multiscalar holotomography KW - holotomography KW - computed tomography KW - CT KW - X-ray Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-262112 SN - 2313-433X VL - 8 IS - 2 ER - TY - JOUR T1 - Measurement of inclusive and differential cross sections in the \(H\) → \({ZZ}^*\) → \(4{ℓ}\) decay channel in \({pp}\) collisions at \(\sqrt{s} = 13\) TeV with the ATLAS detector JF - Journal of High Energy Physics N2 - Inclusive and differential fiducial cross sections of Higgs boson production in proton-proton collisions are measured in the \(H\) → \({ZZ^*}\) → \(4{ℓ}\) decay channel. The proton-proton collision data were produced at the Large Hadron Collider at a centre-of-mass energy of 13 TeV and recorded by the ATLAS detector in 2015 and 2016, corresponding to an integrated luminosity of 36.1 fb\(^{−1}\). The inclusive fiducial cross section in the \(H\) → \({ZZ^*}\) → \(4{ℓ}\) decay channel is measured to be 3.62 ± 0.50(stat)\(^{+0.25}_{− 0.20}\) (sys) fb, in agreement with the Standard Model prediction of 2.91 ± 0.13 fb. The cross section is also extrapolated to the total phase space including all Standard Model Higgs boson decays. Several differential fiducial cross sections are measured for observables sensitive to the Higgs boson production and decay, including kinematic distributions of jets produced in association with the Higgs boson. Good agreement is found between data and Standard Model predictions. The results are used to put constraints on anomalous Higgs boson interactions with Standard Model particles, using the pseudo-observable extension to the kappa-framework. KW - High energy physics KW - Hadron-Hadron scattering (experiments) KW - Higgs physics Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-172724 VL - 2017 IS - 10 ER - TY - JOUR T1 - Search for top quark decays \(t → qH\), with \(H → γγ\), in \(\sqrt{s} = 13\) TeV \(pp\) collisions using the ATLAS detector JF - Journal of High Energy Physics N2 - This article presents a search for flavour-changing neutral currents in the decay of a top quark into an up-type (\({q = c, u}\)) quark and a Higgs boson, where the Higgs boson decays into two photons. The proton-proton collision data set analysed amounts to 36.1 fb\(^{−1}\) at \(\sqrt{s} = 13\) TeV collected by the ATLAS experiment at the LHC. Top quark pair events are searched for, where one top quark decays into \(qH\) and the other decays into \(bW\). Both the hadronic and leptonic decay modes of the \(W\) boson are used. No significant excess is observed and an upper limit is set on the \({t → cH}\) branching ratio of 2.2 × 10\(^{−3}\) at the 95% confidence level, while the expected limit in the absence of signal is 1.6 × 10\(^{−3}\). The corresponding limit on the \(tcH\) coupling is 0.090 at the 95% confidence level. The observed upper limit on the \({t → uH}\) branching ratio is 2.4 × 10\(^{−3}\). KW - High energy physics KW - Flavour changing neutral currents KW - Hadron-Hadron scattering (experiments) KW - Higgs physics KW - Top physics Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-172568 VL - 2017 IS - 10 ER - TY - JOUR T1 - Search for a scalar partner of the top quark in the jets plus missing transverse momentum final state at \(\sqrt{s}\) = 13 TeV with the ATLAS detector JF - Journal of High Energy Physics N2 - A search for pair production of a scalar partner of the top quark in events with four or more jets plus missing transverse momentum is presented. An analysis of 36.1 fb\(^{−1}\) of \(\sqrt{s}\) = 13 TeV proton-proton collisions collected using the ATLAS detector at the LHC yields no significant excess over the expected Standard Model background. To interpret the results a simplified supersymmetric model is used where the top squark is assumed to decay via \(\tilde{t}_1\) → \(t^{(∗)}\)\(\tilde{χ}^0_1\) and \(\tilde{t}_1\) → \(b\tilde{χ}^±_1\) → \({bW}^{(∗)}\tilde{χ}^0_1\), where \(\tilde{χ}^0_1\) (\(\tilde{χ}^±_1\)) denotes the lightest neutralino (chargino). Exclusion limits are placed in terms of the top-squark and neutralino masses. Assuming a branching ratio of 100% to \(t\tilde{χ}^0_1\), top-squark masses in the range 450–1000 GeV are excluded for \(\tilde{χ}^0_1\) masses below 160 GeV. In the case where \(m_{\tilde{t}_1}\) ∼ \(m_t\) + \(m_{\tilde{χ}^0_1}\), top-squark masses in the range 235–590 GeV are excluded. KW - high energy physics KW - Hadron-Hadron scattering (experiments) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-172161 VL - 12 ER - TY - JOUR T1 - Measurement of dijet azimuthal decorrelations in \({pp}\) collisions at root s=8 TeV with the ATLAS detector and determination of the strong coupling JF - Physical Review D N2 - measurement of the rapidity and transverse momentum dependence of dijet azimuthal decorrelations is presented, using the quantity R-Delta phi. The quantity R-Delta phi specifies the fraction of the inclusive dijet events in which the azimuthal opening angle of the two jets with the highest transverse momenta is less than a given value of the parameter Delta phi(max). The quantity R-Delta phi is measured in proton-proton collisions at root s = 8 TeV as a function of the dijet rapidity interval, the event total scalar transverse momentum, and Delta phi(max). The measurement uses an event sample corresponding to an integrated luminosity of 20.2 fb(-1) collected with the ATLAS detector at the CERN Large Hadron Collider. Predictions of a perturbative QCD calculation at next-to-leading order in the strong coupling with corrections for nonperturbative effects are compared to the data. The theoretical predictions describe the data in the whole kinematic region. The data are used to determine the strong coupling alpha(S) and to study its running for momentum transfers from 260 GeV to above 1.6 TeV. Analysis that combines data at all momentum transfers results in alpha(S) (m(Z)) = 0.1127(- 0.0027) (+0.0063). KW - pp collisions Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-220665 VL - 98 IS - 9 ER - TY - THES A1 - Dietrich, Philipp T1 - Traveling Wave Magnetic Particle Imaging: Visuelle Stenosequantifizierung und Perkutane Transluminale Angioplastie im Gefäßmodell T1 - Traveling Wave Magnetic Particle Imaging: visual stenosis quantification and percutaneous transluminal angioplasty in a phantom model N2 - Magnetic Particle Imaging (MPI) ist ein innovatives tomographisches Bildgebungs­verfahren, mit dem Tracerpartikel äußerst sensitiv und schnell mehrdimensional abgebildet werden können. Die Methode basiert auf der nichtlinearen Magnetisierungs­antwort superparamagnetischer Eisenoxidnanopartikel (SPION) in einem Messpunkt, welcher ein Messvolumen rastert. In vorliegender Arbeit wurde das sog. Traveling Wave MPI (TWMPI) Verfahren eingesetzt, wodurch im Vergleich zu konventionellen MPI-Scannern ein größeres Field of View (FOV) und eine geringere Latenz bis zur Bildanzeige erreicht werden konnte. TWMPI weist einige für medizinische Zwecke vielversprechende Eigenschaften auf: Es liefert zwei- und dreidimensionale Bildrekonstruktionen in Echtzeit mit hoher zeitlicher und räumlicher Auflösung. Dabei ist die Bildgebung von Grund auf hintergrundfrei und erfordert keinerlei ionisierende Strahlung. Zudem ist die Technik äußerst sensitiv und kann SPION-Tracer noch in mikromolaren Konzentrationen detektieren. Ziel dieser Arbeit war es daher zu untersuchen, inwiefern es mittels TWMPI möglich ist, künstliche Stenosen im Gefäßmodell visuell in Echtzeit darzustellen und quantitativ zu beurteilen sowie überdies eine perkutane transluminale Angioplastie (PTA) im Gefäßmodell unter TWMPI-Echtzeit-Bildgebung durchzuführen. Alle Experimente wurden in einem speziell angefertigten TWMPI-Scanner durchgeführt (JMU Würzburg, Experimentelle Physik V (Biophysik), FOV: 65 x 29 x 29 mm³, Auflösung: ca. 1.5 - 2 mm). Die Lumen-Darstellungen erfolgten mittels des SPION-Tracers Ferucarbotran in einer Verdünnung von 1 : 50 (entspr. 10 mmol [Fe]/l). Das PTA-Instrumentarium wurde mit eigens hergestelltem ferucarbotran­haltigem Lack (100 mmol [Fe]/l) markiert. Für die verschiedenen Teilexperimente wurden den jeweiligen speziellen Anforderungen entsprechend mehrere Gefäßmodelle handgefertigt. Für die visuelle Stenosequantifizierung wurden fünf starre Stenosephantome unterschiedlicher Stenosierung (0%, 25%, 50%, 75%, 100%) aus Polyoxymethylen her­gestellt (l: 40 mm, ID: 8 mm). Die Gefäßmodelle wurden mehrfach zentral im FOV platz­iert und das stenosierte Lumen mittels sog. Slice-Scanning Modus (SSM, Einzel­aufnahme inkl. 10 Mittelungen: 200 ms, Bildfrequenz: 5 Bilder pro Sekunde, Latenz: ca. 100 ms) als zweidimensionale Quasi-Projektionen abgebildet. Diese Aufnahmen (n = 80, 16 je Phantom) wurden mit einer ein­heitlichen Grauskalierung versehen und anschließend entsprechend den NASCET-Kriterien visuell ausgewertet. Alle achtzig Aufnahmen waren unabhängig vom Stenosegrad aufgrund einheitlicher Fensterung sowie konstanter Scannerparameter untereinander gut vergleichbar. Niedrig­gradige Stenosen konnten insgesamt genauer abgebildet werden als höhergradige, was sich neben der subjektiven Bildqualität auch in geringeren Standardabweichungen zeigte (0%: 3.70 % ± 2.71, 25%: 18.64 % ± 1.84, 50%: 52.82 % ± 3.66, 75%: 77.84 % ± 14.77, 100%: 100 % ± 0). Mit zunehmendem Stenosegrad kam es vermehrt zu geometrischen Ver­zerrungen im Zentrum, sodass bei den 75%-Stenosen eine breitere Streuung der Messwerte mit einer höheren Standardabweichung von 14.77% einherging. Leichte, randständige Artefakte konnten bei allen Datensätzen beobachtet werden. Für die PTA wurden drei interaktive Gefäßmodelle aus Polyvinylchlorid (l: 100 mm, ID: 8 mm) mit zu- und abführendem Schlauchsystem entwickelt, welche mittels Kabelband von außen hochgradig eingeengt werden konnten. Analog zu einer konventionellen PTA mittels röntgenbasierter digitaler Subtraktionsangiographie (DSA), wurden alle erforder­lichen Arbeitsschritte (Gefäßdarstellung, Drahtpassage, Ballonplatzierung, Angioplastie, Erfolgskontrolle) unter (TW)MPI-Echtzeit-Bildgebung (Framerate: 2 - 4 FPS, Latenz: ca. 100 ms) abgebildet bzw. durchgeführt. Im Rahmen der PTA war eine Echtzeit-Visualisierung der Stenose im Gefäßmodell durch Tracer-Bolusgabe sowie die Führung des markierten Instrumentariums zum Zielort möglich. Die Markierung der Instrumente hielt der Beanspruchung während der Prozedur stand und ermöglichte eine genaue Platzierung des Ballonkatheters. Die Stenose konnte mittels Angioplastie-Ballons unter Echtzeit-Darstellung gesprengt werden und der Interventionserfolg im Anschluss durch erneute Visualisierung des Lumens validiert werden. Insgesamt zeigt sich MPI somit als adäquate Bildgebungstechnik für die beiden in der Fragestellung bzw. Zielsetzung definierten experimentellen Anwendungen. Stenosen im Gefäßmodell konnten erfolgreich in Echtzeit visualisiert und bildmorphologisch nach NASCET-Kriterien quantifiziert werden. Ebenso war eine PTA im Gefäßmodell unter TWMPI-Echtzeit-Bildgebung machbar. Diese Ergebnisse unter­streichen das grundlegende Potenzial von MPI für medizinische Zwecke. Um zu den bereits etablierten Bildgebungsmethoden aufzuschließen, ist jedoch weitere Forschung im Bereich der Scanner-Hard- und -Software sowie bezüglich SPION-Tracern nötig. N2 - Magnetic Particle Imaging (MPI) is an innovative tomographic imaging method with which tracer particles can be depicted multidimensionally quickly and extremely sensitively. The method is based on the nonlinear magnetization response of superparamagnetic iron oxide nanoparticles (SPION) in a measuring point that runs through a measurement volume. In the present work, the so-called Traveling Wave MPI (TWMPI) method was used, whereby a larger Field of View (FOV) and a lower latency from measurement to image display could be achieved compared to conventional MPI scanners. TWMPI has some promising properties for medical purposes: it delivers two- and three-dimensional image reconstructions in real time with high temporal and spatial resolution. The imaging is background-free by default and does not require any ionizing radiation. In addition, the technology is extremely sensitive and can detect SPION tracers in micromolar concentrations. The aim of this work was therefore to investigate to what extent it is possible to use TWMPI to graphically visualize and quantitatively assess artificial stenoses in a phantom model in real time and furthermore to perform a percutaneous transluminal angioplasty (PTA) in a phantom model under TWMPI real-time imaging. All experiments were carried out in a specially manufactured TWMPI scanner (JMU Würzburg, Experimental Physics V (Biophysics), FOV: 65 x 29 x 29 mm³, resolution: approx. 1.5 - 2 mm). Lumen visualization was achieved by use of the SPION tracer Ferucarbotran in a dilution of 1 : 50 (corresponding to 10 mmol [Fe] / l). The PTA instruments were marked with specially produced ferucarbotran-containing lacquer (100 mmol [Fe]/l). For the different sub-experiments, several vessel phantoms were custom-made according to the respective specific requirements. For visual stenosis quantification, five rigid stenosis phantoms of different grade of stenosis (0%, 25%, 50%, 75%, 100%) were built from polyoxymethylene (l: 40 mm, ID: 8 mm). The vessel phantoms were placed centrally in the FOV several times and the stenotic lumen was depicted as two-dimensional quasi-projections using a so-called slice scanning mode (SSM, single recording incl. averaging 10‑fold: 200 ms, frame rate: 5 frames per second, latency: approx. 100 ms). A uniform gray scaling was applied to these images (n = 80, 16 per phantom) before they were visually evaluated according to the NASCET criteria. Due to the uniform gray scaling, display settings and constant scanner parameters, all eighty images were well comparable with each other, regardless of the degree of stenosis. Overall, low-grade stenoses could be depicted more accurately than higher-grade ones, which, in addition to the subjective image quality, was also reflected in lower standard deviations (0%: 3.70 % ± 2.71, 25%: 18.64 % ± 1.84, 50%: 52.82 % ± 3.66, 75%: 77.84 % ± 14.77, 100%: 100 % ± 0). With increasing­ degree of stenosis, geometric distortions in the center increased, so that within the 75% stenoses a wider spread of the measured values led to a higher standard deviation of 14.77%. Faint, marginal artifacts could be observed over all data sets. For PTA, three interactive vessel phantoms made of polyvinyl chloride (l: 100 mm, ID: 8 mm) were developed with additional tubing to and from the phantom. These vessel phantoms could be highly constricted from the outside by use of cable ties. Analogous to a conventional PTA using X-ray-based digital subtraction angiography (DSA), all necessary steps (vascular visualization, wire passage, balloon placement, angioplasty, control imaging) were depicted by resp. carried out under (TW)MPI real-time imaging (frame rate: 2 – 4 FPS, latency: approx. 100 ms). During the PTA, real-time visualization of the stenosis in the vascular phantom by tracer bolus administration as well as guidance of the marked instruments to the destination was possible. The marking of the instruments withstood the stress during the procedure and allowed an accurate placement of the balloon catheter. The stenosis could be dilated with an angioplasty balloon under real-time imaging and the intervention success could then be validated by re-visualization of the lumen. Overall, MPI thus proves to be an adequate imaging technique in regard of the two experimental applications defined in the questions and aims of this study. Stenoses in a vascular phantom could be successfully visualized in real time and quantified visually according to NASCET criteria. Furthermore, a PTA in a vascular phantom guided by TWMPI real-time imaging was feasible. These findings underscore the fundamental potential of MPI for medical purposes. In order to catch up with the already established imaging methods, however, further research is needed in the field of scanner hard- and software as well as regarding SPION tracers. KW - Medizinische Radiologie KW - Magnetpartikelbildgebung KW - Interventionsradiologie KW - Experimentelle Bildgebung KW - Magnetic Particle Imaging KW - Traveling Wave Magnetic Particle Imaging KW - Interventionelle Radiologie KW - MPI KW - experimental imaging KW - magnetic particle imaging KW - traveling wave magnetic particle imaging KW - interventional radiology KW - Transluminale Angioplastie KW - MPI Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-352517 ER - TY - JOUR A1 - Glinz, Jonathan A1 - Šleichrt, Jan A1 - Kytýř, Daniel A1 - Ayalur-Karunakaran, Santhosh A1 - Zabler, Simon A1 - Kastner, Johann A1 - Senck, Sascha T1 - Phase-contrast and dark-field imaging for the inspection of resin-rich areas and fiber orientation in non-crimp vacuum infusion carbon-fiber-reinforced polymers JF - Journal of Materials Science N2 - In this work, we present a multimodal approach to three-dimensionally quantify and visualize fiber orientation and resin-rich areas in carbon-fiber-reinforced polymers manufactured by vacuum infusion. Three complementary image modalities were acquired by Talbot–Lau grating interferometer (TLGI) X-ray microcomputed tomography (XCT). Compared to absorption contrast (AC), TLGI-XCT provides enhanced contrast between polymer matrix and carbon fibers at lower spatial resolutions in the form of differential phase contrast (DPC) and dark-field contrast (DFC). Consequently, relatively thin layers of resin, effectively indiscernible from image noise in AC data, are distinguishable. In addition to the assessment of fiber orientation, the combination of DPC and DFC facilitates the quantification of resin-rich areas, e.g., in gaps between fiber layers or at binder yarn collimation sites. We found that resin-rich areas between fiber layers are predominantly developed in regions characterized by a pronounced curvature. In contrast, in-layer resin-rich areas are mainly caused by the collimation of fibers by binder yarn. Furthermore, void volume around two adjacent 90°-oriented fiber layers is increased by roughly 20% compared to a random distribution over the whole specimen. Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-351581 VL - 56 IS - 16 ER -