TY - THES A1 - Grebner, Christoph T1 - New Tabu-Search Algorithms for the Exploration of Energy Landscapes of Molecular Systems T1 - Neue Tabu-Search Algorithmen zur Untersuchung von Energielandschaften molekularer Systeme N2 - The visualization of energy functions is based on the possibility of separating different degrees of freedom. The most important one is the Born-Oppenheimer-approximation, which separates nucleus and electron movements. This allows the illustration of the potential energy as a function of the nuclei coordinates. Minima of the surface correspond to stable points like isomers or conformers. They are important for predicting the stability or thermodynamical of a system. Stationary points of first order correspond to transition points. They describe phase transitions, chemical reaction, or conformational changes. Furthermore, the partition function connects the potential hypersurface to the free energy of the system. The aim of the present work is the development and application of new approaches for the efficient exploration of multidimensional hypersurfaces. Initially, the Conformational Analysis and Search Tool (CAST) program was developed to create a basis for the new methods and algorithms. The development of CAST in object oriented C++ included, among other things, the implementation of a force field, different interfaces to external programs, analysis tools, and optimization libraries. Descriptions of an energy landscape require knowledge about the most stable minima. The Gradient Only Tabu Search (GOTS) has been shown to be very efficient in the optimization of mathematical test functions. Therefore, GOTS was taken as a starting point. Tabu-Search is based on the steepest descent - modest ascent strategy. The steepest descent is used for finding local minima, while the modest ascent is taken for leaving a minimum quickly. Furthermore, Tabu-Search is combined with an adaptive memory design to avoid cycling or returning. The highly accurate exploration of the phase space by Tabu-Search is often too expensive for complex optimization problems. Therefore, an algorithm for diversification of the search is required. After exploration of the proximity of the search space, the algorithm would guide the search to new and hopefully promising parts of the phase space. First application of GOTS to conformational search revealed weaknesses in the diversification search and the modest ascent part. On the one hand, the original methodology for diversification is insufficiently diverse. The algorithm is considerably improved by combining the more local GOTS with the wider searching Basin Hopping (BH) approach. The second weak point is a too inaccurate and inefficient modest ascent strategy. Analysis of common transition state search algorithms lead to the adaption of the Dimer-method to the Tabu-Search approach. The Dimer-method only requires the first derivatives for locating the closest transition state. For conformational search, dihedral angles are usually the most flexible degrees of freedom. Therefore, only those are used in the Dimer-method for leaving a local minimum. Furthermore, the exact localization of the reaction pathway and the transition state is not necessary as the local minimum position should only be departed as fast as possible. This allows for larger step sizes during the Dimer-search. In the following optimization step, all coordinates are relaxed to remove possible strains in the system. The new Tabu-Search method with Dimer-search delivers more and improved minima. Furthermore, the approach is faster for larger systems. For a system with approximately 1200 atoms, an acceleration of 40 was measured. The new approach was compared to Molecular Dynamics with optimization (MD), Simulated Annealing (SA), and BH with the help of conformational search problems of bio-organic systems. In all cases, a better performance was found. A comparison to the Monte Carlo Multiple Minima/Low Mode Sampling (MCMM/LM) method proved the outstanding performance of the new Tabu-Search approach. The solvation of the chignolin protein further revealed the possibility of uncovering discrepancies between the employed theoretical model and the experimental starting structure. Ligand optimization for improvement of x-ray structures was one further new application field. Besides the global optimization, the search for transition states and reaction pathways is also of paramount importance. These points describe different transitions of stable states. Therefore, a new approach for the exploration of such cases was developed. The new approach is based on a global minimization of a hyperplane being perpendicular to the reaction coordinate. Minima of this reduced phase space belong to traces of transition states between reactant and product states on the unchanged hypersurface. Optimization to the closest transition state using the Dimer-method delivers paths lying between the initial and the final state. An iterative approach finally yields complex reaction pathways with many intermediate local minima. The PathOpt algorithm was tested by means of rearrangements of argon clusters showing very promising results. N2 - Die visuelle Darstellung von Energiefunktionen basiert auf der Möglichkeit, verschiedene Freiheitsgrade zu separieren. Die wichtigste Näherung ist dabei die Born-Oppenheimer-Näherung. Sie erlaubt damit die Darstellung der potentiellen Energie als Funktion der Kernkoordinaten. Die daraus entstehende mehrdimensionale Hyperfläche entspricht der Summenformel eines beliebigen Systems. Minima der Fläche entsprechen stabilen Punkten wie Isomeren oder Konformeren. Diese sind wichtig für Aussagen über die Stabilität oder die Thermodynamik eines Systems. Stationäre Punkte erster Ordnung entsprechen Übergangsstrukturen und beschreiben Phasenübergänge, chemische Reaktionen aber auch Konformationsänderungen. Über die Zustandssumme ist die Hyperfläche zudem mit der freien Energie verknüpft. Das Ziel dieser Arbeit ist die Entwicklung und Anwendung neuer Methoden zur effizienten Untersuchung mehrdimensionaler Hyperflächen. Dabei wurde zunächst das Conformational Analysis and Search Tool (CAST)-Programm entwickelt. Die Entwicklung des CAST-Programms in objektorientiertem C++ beinhaltete unter anderem die Implementierung eines Kraftfeldes, verschiedene Schnittstellen zu externen Programmen, Analysealgorithmen und verschiedene Optimierungsmodule. Um Aussagen über eine Energielandschaft treffen zu können, müssen zuerst die stabilsten Minima gefunden werden. Der Gradient Only Tabu Search (GOTS) hat sich als sehr effizient in der Optimierung von mathematischen Funktionen erwiesen. Daher wurde GOTS als Startpunkt verwendet. Tabu-Search basiert auf dem steepest descent – modest ascent Prinzip. Zum Finden neuer Minima wird der steilste Abstieg (steepest descent) verwendet, ein Minimum wird auf dem Weg des geringsten Anstiegs (modest ascent) wieder verlassen. Tabu-Search ist zudem mit einem lernfähigen Speicherdesign kombiniert, wodurch ein Zurück- und im Kreis laufen vermieden wird. Der Phasenraum wird von Tabu-Search sehr genau untersucht, was für komplexere Probleme zu aufwendig wird. Daher bedarf es eines Diversifizierungsschritts, welcher nach Absuchen eines Teils des Phasenraums, die Suche in neue vielversprechende Bereiche bringt. Erste Anwendungen auf Konformationssuchen zeigten, dass GOTS Schwächen im Diversifizierungsschritt und der modest ascent Strategie besitzt. Zum einen ist die ursprünglich verwendete Methodik für die Diversifizierung zu wenig divers. Eine Kombination des mehr lokalen GOTS mit der weiträumiger suchenden Basin Hopping (BH) Methode brachte eine erhebliche Verbesserung. Der zweite Schwachpunkt besteht aus einer zu ungenauen und ineffizienten modest ascent Methode. Daher wurde die Dimer-Methode für Tabu-Search adaptiert. Diese benötigt lediglich die erste Ableitung, um zum Übergangszustand erster Ordnung zu konvergieren. Dabei werden in der Dimer-Methode nur Diederwinkel variiert. Zudem muss der Reaktionspfad und der Übergangszustand nicht exakt getroffen werden, da das Minimum nur möglichst schnell verlassen werden soll. Dies erlaubt größere Schrittweiten in der Dimer-Suche. Im nachfolgenden Optimierungsschritt werden alle Koordinaten relaxiert. Die neue Tabu-Search-Methode mit Dimer-Suche liefert mehr und deutlich verbesserte Minima. Zudem ist sie für größere Systeme deutlich schneller. Für ein System mit circa 1200 Atomen wurde eine Beschleunigung um den Faktor 40 erzielt. Die neue Methode wurde am Beispiel der Konformationssuche von bio-organischen Systemen mit Molekulardynamik mit Optimierung (MD), Simulated Annealing (SA) und BH verglichen, wobei sich in allen Fällen eine bessere Effizienz zeigte. Ein Vergleich zur Monte Carlo Multiple Minima/Low Mode Sampling Methode anhand der Optimierung von peptidischen Ligand-Rezeptor-Komplexen belegte ebenfalls die hervorragende Effizienz des neuen Ansatzes. Die Solvatisierung des Chignolin-Proteins mit Tabu-Search deckte die Möglichkeit auf, Differenzen zwischen der verwendeten theoretischen Methode und der experimentellen Startstruktur aufzudecken. Als weiterer neuer Anwendungsbereich wurde die Optimierung von Ligand-Enzym-Komplexen zur Verbesserung von Röntgenstrukturen untersucht. Neben der globalen Optimierung ist auch die Suche nach Übergangszuständen und Reaktionspfaden von größter Wichtigkeit. Diese beschreiben verschiedene Übergänge zwischen stabilen Zuständen. Daher wurde ein neuer Ansatz zur Untersuchung dieser Fragestellungen entwickelt. Dieser basiert auf einer globalen Minimierung einer Hyperfläche, welche senkrecht zum Reaktionspfad steht. Die Minima des reduzierten Phasenraums gehören zu Spuren zu Übergangszuständen zwischen dem Edukt und dem Produkt. Durch Optimierung dieser Punkte mittels der Dimer-Methode werden also Pfade gefunden, die zwischen Anfangs- und Endpunkt liegen. Ein iteratives Vorgehen liefert letztendlich komplexe Reaktionspfade. PathOpt wurde an Umlagerungen von Argon-Clustern evaluiert, welche sehr vielversprechende Ergebnisse lieferten. KW - Globale Optimierung KW - Kraftfeld-Rechnung KW - Übergangszustand KW - Computational chemistry KW - Tabu-Search KW - Methodenentwicklung KW - Dimermethode KW - Basin-Hopping KW - Energielandschaft KW - Theoretische Chemie KW - Tabu-Search KW - method development KW - dimer method KW - basin hopping KW - energy landscapes Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-75591 ER - TY - THES A1 - Steinbauer, Michael Christoph T1 - Ionen- und Elektronenimaging reaktiver Moleküle: Ethyl, Propargylen und Fulvenallenyl T1 - Ion- and electron imaging of reactive molecules: Ethyl, propargylen and fulvenallenyl N2 - Bei Verbrennungsprozessen im Otto-Motor, beim Raffinationsprozess in Erdölraffinerien, im interstellaren Raum oder in der Chemie der Erdatmosphäre spielen Moleküle, wie sie in dieser Arbeit untersucht wurden, eine wichtige Rolle. Allerdings stellt es eine große Herausforderung dar, solch reaktive Substanzen zu erzeugen und zu handhaben. Um das Ethyl-Radikal, ein wichtiges Intermediat z.B. in der Erzeugung von Ethylen, zu untersuchen, wurde eine bestehende Apparatur modifiziert. Diese ermöglicht es, die Geschwindigkeitsverteilung der Fragmente (Ionen oder Elektronen) zweidimensional aufzuzeichnen, die nach der Anregung mittels Laserlicht durch Photodissoziation entstehen. Diese velocity-map imaging Apparatur wurde in einem ersten Schritt mittels der Photodissoziation von Pyrrol bei 240 nm kalibriert. Cycloheptatrien konnte erfolgreich auf seine Photodissoziation untersucht werden, was als Test des VMI-Experiment genutzt wurde. Die gewonnenen Ergebnisse stimmten mit Resultaten überein, welche durch Doppler-Fragmentspektroskopie in dieser und früheren Arbeiten gewonnen wurden. Zwischen 11 und 13 % der Überschussenergie gehen dabei in die Translation des H-Atoms. • Das Ethyl-Radikal zeigte, als das erste mit unserer VMI-Apparatur untersuchte Radikal, eine interessante Photodissoziation: Wird es bei 250 nm angeregt, ergeben sich zwei Dissoziationskanäle, wobei ein bekannter Kanal nach schneller interner Konversion in den Grundzustand Fragmente mit geringer Translationsenergie erzeugt. Der zweite Kanal zeigt anisotropes Verhalten und erzeugt Wasserstoffatome mit hoher Translationsenergie, die mehr als die Hälfte der Überschussenergie abführen. Die Erklärung dieses Prozesses erweist sich schwierig in Anbetracht von durchgeführten Isotopenmarkierungsexperimenten sowie der beobachteten Ratenkonstanten für die Photodissoziation. Eine Interaktion von Valenz- und Rydbergzuständen im Ethyl-Radikal könnte eine Erklärung darstellen. In Zukunft kann beim VMI-Experiment in Würzburg versucht werden, die Auflösung weiter zu verbessern. Dabei ergäben sich im Idealfall zwei scharfe Ringe der H-Atome durch die Spin-Bahn-Aufspaltung von Brom, welche eine sehr genaue Kalibrierung ermöglichen. Neben den Ergebnissen auf dem Gebiet der Photodissoziation, die mit der VMI-Apparatur erzielt wurden, konnten mittels Synchrotronstrahlung und Aufzeichnen der Photoelektronen mittels VMI und der TPEPICO-Technik die folgenden Ergebnisse erhalten werden: • Von Propargylen, einem von drei C3H2 Isomeren, konnte die adiabatische Ionisierungsenergie (IEad) mit 8.99 eV bestimmt werden. Der Vorläufer Diazopropin, eine sehr instabile Substanz, wurde dazu synthetisiert und mit Synchrotronlicht untersucht. Allerdings war es nicht möglich, die Schwingungen im Kation oder die dissoziative Photoionisation (DPI) des Carbens zu untersuchen, da Diazopropin seinerseits bereits bei Energien von 9 eV durch DPI zerfällt. Allerdings konnte ein Peak im TPES des zyklischen Isomers aus einer früheren Messung eindeutig dem Propargylen zugeordnet werden. Ein Ausweg die DPI zu umgehen stellt die Verwendung eines anderen Vorläufers dar. Beispielsweise wurde dazu Propargylchlorid getestet, welches aber nicht das Propargylen erzeugt, sondern das zyklische Isomer Cyclopropenyliden. Daneben können durch ein Doppel-Imaging Experiment, bei dem die Ionen genauso wie die Elektronen mit einem bildgebenden Detektor aufgezeichnet werden, Ionen mit kinetischer Energie aus DPI von Ionen aus der Ionisation ohne kinetischer Energie unterschieden werden. • Von den substituierten Methyl-Radikalen Brommethyl sowie Cyanomethyl konnte die IEad (8.62 bzw. 10.28 eV) und vom Brommethyl die DPI (AE0K = 13.95 eV) bestimmt werden. Daraus konnte der Einfluss der Substituenten auf die IEad im Vergleich zum Methyl-Radikal (IE = 9.84 eV) gezeigt werden. Das zeigt, dass der Brom-Substituent das Kation, der Cyano-Rest dagegen das Radikal stabilisiert. Ebenso konnten aus den Ergebnissen beim Brommethyl thermodynamische Daten wie die Standardbildungsenthalpie des Radikals (ΔH0f= 174.5 kJ/mol) oder Bindungsenergien gewonnen werden. Letztere betragen 334 kJ/mol für die C-Br Bindung im Brommethyl-Radikal sowie 505 kJ/mol im Kation. • Das Fulvenallen (C7H6) wurde aus Phthalid durch Pyrolyse erzeugt und dessen IEad mit 8.22 eV bestimmt. Schwingungen konnten im Kation aufgelöst und zugeordnet werden. Außerdem konnte erstmals die IEad des Fulvenallenyl-Radikals (C7H5) mit 8.19 eV festgelegt werden. Im Vergleich zu früheren Messungen zeigte sich, dass aus Toluol in der Pyrolyse ebenfalls die beiden C7H5/C7H6 Isomere entstehen. Um verschiedene C7H5/C7H6 Isomere in einem Verbrennungsprozess zu unterscheiden, wäre es vorteilhaft, experimentell bestimmte Ionisierungsenergien von anderen Isomeren zu kennen. N2 - In the present work several hydrocarbons have been studied for their intrinsic properties like photoionization, photodissociation or dissociative photoionization. These radicals and carbenes are important in several fields of research: combustion processes (Otto engine), refining processes in oil refineries, interstellar space or chemistry in the Earth’s atmosphere. Molecules like the ones presented in this work play an important role in all these fields of science. However, it poses a great challenge to produce and handle such reactive substances. An apparatus was modified to study the ethyl radical, an important intermediate e.g. in the production of ethylene, in more detail. This experiment allows to record the velocity distribution of the fragment ions, which are produced after excitation with laser light. In a first step this VMI machine was calibrated by the measurement of pyrrol’s photodissociation at an excitation wavelength of 240 nm. In a second step the setup was tested with the photodissociation of cycloheptatriene. Results obtained by Doppler fragment spectroscopy in this and older piece of work were confirmed. About 11 to 13 % of the excess energy are converted to translational energy of the H atom. • The ethyl radical’s photodissociation after excitation at 250 nm was quite interesting. This radical, being the first one studied with this VMI apparatus, showed two dissociation channels: One produces slow H-atoms with an isotropic distribution. This channel was known to the literature and explained by a redistribution of energy on the ground state potential energy surface after fast internal conversion. A second dissociation channel was also observed. Fast H atoms with an anisotropic distribution carry away the vast majority of excess energy. Considering some isotopic labeling experiments and rate constants of the dissoziation the explanation of the second channel is quite challenging. An interaction of Rydberg- and valence states could be a possible explanation. In the future, one can try to improve the resolution of the VMI-experiment in Würzburg further. Besides the results obtained with the VMI machine on the photodissociation some more results were obtained with the help of photoelectron VMI, synchrotron radiation and the TPEPICO imaging technique: The adiabatic ionization energy of propargylene - one of three C3H2 isomers - could be determined to be 8.99 eV. Its precursor diazopropyne could be synthesized, but it came out that this substance is very unstable. The experiments were carried out with synchrotron radiation. Because of the precursor’s DPI, the vibrations of the proparglyene cation could not be resolved. However, one peak could be explained in the threshold electron spectrum of cyclopropenylidene in an earlier experiment, which was assigned the propargylene. One way to circumvent the DPI is to use a different precursor. Therefore, propargyl chloride was tested. Unfortunately, it produced the cyclic isomer cyclopropenylidene. If a doubleimaging experiment would be used, in which ions and electrons are detected by VMI, one could distinguish ions with kinetic energy (by DPI) from those without kinetic energy. • The IEad of two substituted methyl radicals could be determined. The cyanomethyl (10.28 eV) and the bromomethyl radical (8.62 eV) showed differences in their photoionization compared to the methyl radical (9.84 eV). This shows the stabilization effect of the cyano substituent on the radical and of the bromine on the cation. The DPI of bromomethyl could be allocated to 13.95 eV. This allowed us to calculate thermodynamic data like the radical’s heat of formation (ΔH0f =174.5 kJ/mol) or dissociation energies of the C-Br bonding. The latter are 334 kJ/mol in the bromomethyl radical respectively 505 kJ/mol in the cation. • Fulvenallen (C7H6) was produced from phthalide by pyrolysis. The IEad of the stable species was determined to be 8.22 eV. A vibrational progression of the cation could be resolved and assigned. Furthermore, the IEad of the radical fulvenallenyl (C7H5) could be determined to be 8.19 eV. Compared to earlier results obtained on the pyrolysis products of toluene it showed that both C7H5/C7H6 isomers are produced. To distinguish different C7H5/C7H6 isomers in combustion processes, experimentally determined IEs of other isomers would be useful. Unfortunately, the precursors for these are connected to time-consuming synthesis. Although fulvenallenyl is of great interest for scientists, only little has been published in literature. Besides the photoionization, a VMI-experiment could allow a closer look on the photodissociation of this radical to verify and improve kinetic models and calculations in the near future. However, one has to know the properties of its excited states. KW - Radikal KW - Photodissoziation KW - Ionisationsenergie KW - REMPI KW - Synchrotron KW - Abstimmbarer Laser KW - Ultraviolettlaser KW - Laser KW - Pyrolyse KW - Velocity-Map-Imaging KW - dissoziative Photoionisation KW - Vakuum Jet-Flash Pyrolyse KW - Velocity-Map-Imaging KW - dissoziative Photoionisation Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-75649 ER - TY - THES A1 - Tuchscherer, Philip T1 - A Route to Optical Spectroscopy on the Nanoscale T1 - Über Optische Spektroskopie auf der Nanoskala N2 - Time-resolved optical spectroscopy has become an important tool to investigate the dynamics of quantum mechanical processes in matter. In typical applications, a first “pump” pulse excites the system under investigation from the thermal equilibrium to an excited state, and a second variable time-delayed “probe” pulse then maps the dynamics of the excited system. Although advanced nonlinear techniques have been developed to investigate, e.g., coherent quantum effects, all of these techniques are limited in their spatial resolution. The laser focus diameter has a lower bound given by Abbe’s diffraction limit, which is roughly half the optical excitation wavelength—corresponding to about 400nm in the presented experiments. In the time-resolved experiments that have been suggested so far, averaging over the sample volume within this focus cannot be avoided. In this thesis, two approaches were developed to overcome the diffraction limit in optical spectroscopy and to enable the investigation of coherent processes on the nanoscale. In the first approach, analytic solutions were found to calculate optimal polarizationshaped laser pulses that provide optical near-field pump–probe pulse sequences in the vicinity of a nanostructure. These near-field pulse sequences were designed to allow excitation of a quantum system at one specific position at a certain time and probing at a different position at a later time. In the second approach, the concept of coherent two-dimensional (2D) spectroscopy, which has had great impact on the investigation of coherent quantum effects in recent years, was combined with photoemission electron microscopy, which yields a spatial resolution well below the optical diffraction limit. Using the analytic solutions, optical near fields were investigated in terms of spectroscopic applications. Near fields that are excited with polarization-shaped femtosecond laser pulses in the vicinity of appropriate nanostructures feature two properties that are especially interesting in the view of spectroscopic applications: On the one hand, control of the spatial distribution of the optical fields is achieved on the order of nanometers. On the other hand, the temporal evolution of these fields can be adjusted on the order of femtoseconds. In this thesis, solutions were found to calculate the optimal polarizationshaped laser pulses that control the near field in a general manner. The main idea to achieve this deterministic control was to disentangle the spatial and temporal near-field control. First, the spatial distribution of the optical near field was controlled by assigning the correct state of polarization for each frequency within the polarization-shaped laser pulse independently. The remaining total phase—not employed for spatial control—was then used for temporal near-field compression, which, in experimental applications, would lead to an enhancement of the nonlinear signal at the respective location. In contrast to the use of optical near fields, where pump–probe sequences themselves are localized below the diffraction limit and the detection does not have to provide the spatial resolution, a different approach was suggested in this thesis to gain spectroscopic information on the nanoscale. The new method was termed “Coherent two-dimensional (2D) nanoscopy” and transfers the concept of “conventional” coherent 2D spectroscopy to photoemission electron microscopy. The pulse sequences used for the investigation of quantum systems in this method are still limited by diffraction. However, the new key concept is to detect locally generated photoelectrons instead of optical signals. This yields a spatial resolution that is well below the optical diffraction limit. In “conventional” 2D spectroscopy a triple-pulse sequence initiates a four wave mixing process that creates a coherence. In a quantum mechanical process, this coherence is converted into a population by emission of an electric field, which is measured in the experiment. Contrarily, in the developed 2D nanoscopy, four-wave mixing is initiated by a quadruple-pulse sequence, which leaves the quantum system in an electronic population. This electronic population carries coherent information about the investigated quantum system and can be mapped with a spatial resolution down to a few nanometers given by the spatial resolution of the photoemission electron microscope. Hence, 2D nanoscopy can be considered a generalization of time-resolved photoemission experiments. In the future, it may be of similar beneficial value for the field of photoemission research as “conventional” 2D spectroscopy has proven to be for optical spectroscopy and nuclear magnetic resonance experiments. In a first experimental implementation of coherent 2D nanoscopy coherent processes on a corrugated silver surface were measured and unexpected long coherence lifetimes could be determined. N2 - Zur Untersuchung von Dynamiken quantenmechanischer Prozesse in Materie hat sich die zeitaufgelöste optische Spektroskopie zu einem zentralen Werkzeug entwickelt. Eine Standardmethode ist hierbei die Anrege-Abfrage-Spektroskopie. Bei solch einem Experiment wird das zu untersuchende System zunächst mit einem Anregepuls aus dem thermischen Gleichgewicht in einen höheren Zustand angeregt. Anschließend untersucht man mit einem zweiten zeitverzögerten Abfragepuls die Dynamik des angeregten Systems. Obwohl fortgeschrittene experimentelle Methoden entwickelt wurden um kohärente Quanteneffekte zu untersuchen, sind all diese Experimente nach wie vor in ihrer räumlichen Auflösung begrenzt. Aufgrund von Beugung ist der Fokus eines Laserstrahls limitiert. Diese untere Grenze ist durch Abbe’s Auflösungsgrenze gegeben und entspricht etwa der Hälfte der optischen Anregungswellenlänge, d.h. etwa 400nm in den hier vorgestellten Experimenten. Daher kann eine Mittelung über das Probenvolumen, gegeben durch die Fokusgröße, in den bisher vorgestellten Experimenten nicht vermieden werden. In dieser Arbeit wurden zwei Ansätze verfolgt, um die Beugungsgrenze in der optischen Spektroskopie zu überwinden und die Untersuchung von kohärenten Prozessen auf der Nanometerskala zu ermöglichen. Im ersten Ansatz wurden analytische Lösungen gefunden, um optimal polarisationsgeformte Laserpulse zu berechnen, die optische Anrege-Abfrage-Nahfeld-Pulsfolgen in der Nähe einer Nanostruktur ermöglichen. Diese Nahfeld-Pulsfolgen wurden entwickelt, um ein quantenmechanisches System an einer bestimmten Position zu einem bestimmten Zeitpunkt anzuregen und an einer anderen Position zu einem späteren Zeitpunkt abzufragen. Im zweiten Ansatz wurde das Konzept der kohärenten zweidimensionalen (2D) Spektroskopie, die in den letzten Jahren großen Einfluss auf die Untersuchung von kohärenten Quanteneffekten gehabt hat, mit Photoelektronenmikroskopie kombiniert. Letztere ermöglicht eine räumliche Auflösung deutlich unter der optischen Auflösungsgrenze. Mit Hilfe der analytischen Lösungen wurden optische Nahfelder in Bezug auf spektroskopische Anwendungen untersucht. Nahfelder, die mit polarisationsgeformten Femtosekunden-Laserpulsen in der Nähe von entsprechenden Nanostrukturen angeregt werden, verfügen über zwei Eigenschaften, die besonders interessant für spektroskopische Anwendungen sind: Zum einen kann die räumliche Verteilung der optischen Felder auf der Größenordnung von Nanometern kontrolliert werden. Zum anderen kann die zeitliche Entwicklung dieser Felder in der Größenordnung von Femtosekunden manipuliert werden. In dieser Arbeit wurden Lösungen gefunden, um optimale polarisationsgeformte Laserpulse zu berechnen, die diese Nahfeld-Steuerung in einer allgemeinen Art und Weise erlauben. Die Hauptidee, um diese deterministische Steuerung zu erreichen, war die räumliche und zeitliche Nahfeld-Kontrolle zu entkoppeln. Zuerst wurde dafür die räumliche Verteilung der optischen Nahfelder durch die Zuordnung des korrekten Polarisationszustandes für jede Frequenz, innerhalb des polarisationsgeformten Laserpulses, unabhängig gesteuert. Die verbleibende totale Phase, die nicht für die räumliche Kontrolle benötigt wird, wurde dann verwendet um den nichtlinearen Fluss an den gewünschten Positionen durch zeitliche Nahfeldkomprimierung zu erhöhen. Im Gegensatz zur Verwendung von optischen Nahfeldern, in der die Anrege-Abfrage-Nahfeld-Pulsfolgen selbst unter dem Beugungslimit lokalisiert sind und die Detektion nicht räumlich aufgelöst sein muss, wurde in dieser Arbeit noch ein anderer Ansatz vorgeschlagen, um spektroskopische Informationen auf der Nanometerskala zu erhalten. Die neue Methode wurde als „kohärente zweidimensionale (2D) Nanoskopie“ beschrieben und überträgt das Konzept der „herkömmlichen“ kohärenten 2D Spektroskopie auf die Photoemissionselektronenmikroskopie. In dieser neuen Methode ist die räumliche Auflösung der zur Untersuchung des quantenmechanischen Sytems erforderlichen Pulssequenzen zwar durch Beugung begrenzt. Die wesentliche Neuerung ist allerdings, lokal erzeugte Photoelektronen anstelle von optischen Signalen zu messen. Daraus ergibt sich eine räumliche Auflösung, die weit unterhalb der optischen Beugungsgrenze liegt. Die photoemittierten Elektronen tragen dann kohärente Information über das untersuchte System und können mit einer räumlichen Auflösung von wenigen Nanometern abgebildet werden. Die Auflösung ist dabei durch das verwendete Photoemissionsmikroskop vorgegeben. Demzufolge kann 2D Nanoskopie als eine Verallgemeinerung der zeitaufgelösten Photoemissionsexperimente gesehen werden. In einer ersten experimentellen Umsetzung der kohärenten 2D Nanoskopie wurden kohärente Prozesse auf einer rauhen Silberoberfläche untersucht und dabei unerwartet langlebige Kohärenzen gemessen. KW - Ultrakurzzeitspektroskopie KW - Kohärente Optik KW - Ultrakurzzeit Spektroskopie KW - Kohärente 2D Spektroskopie KW - Coherent 2D Spectroscopy KW - Nanooptic KW - Ultrafast spectroscopy KW - Surface plasmons KW - Optische Spektroskopie KW - Nahfeldoptik KW - Oberflächenplasmonresonanz Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72228 ER - TY - THES A1 - Kritzer, Robert T1 - Quantum dynamics in dissipative environments T1 - Quantendynamik in dissipativer Umgebung N2 - In this thesis, the influence of an environment on molecules and, in particular, on the quantum control of such systems is investigated. Different approaches to describe system-bath dynamics are implemented and applied. The inclusion of a dissipation term in the system Hamiltonian leads to energy loss and relaxation to the ground state. As a first application, the isomerisation reaction in an aromatic complex is treated. It is shown that this simple model is able to reproduce results of time-resolved spectroscopic measurements. Next, the influence of noise is investigated. The incorporation of fluctuations reveals that energy is not conserved and coherences are destroyed. As an example, the quantum control of a population transfer in Na2 is examined. The efficiency of control processes is studied in dependence on the strength of the noise and different system-bath couplings. Starting with the unperturbed system, Local Control Theory is applied to construct a field which selectively transfers population into a single excited electronic state. The coupling to the bath is then switched on to monitor the dependence of the coupling strength on the transfer efficiency. The perturbation of the bath effects the Na2 molecule in such a way that potential energy curves and transition dipole moments are distorted. An important result is that already elastic collisions lead to a substantial loss of control efficiency. The most promising approach used in this thesis is the stochastic Schrödinger equation. It is equivalent to the commonly employed descriptions of system-bath dynamics within the reduced density matrix formalism. It includes decoherences and dissipation caused by elastic and inelastic collisions. Our contribution is the incorporation of laser excitation into the kinetic Monte-Carlo scheme. Thus we are able to apply this stochastic approach to the quantum control of population transfer in the sodium dimer. Because within our description it is possible to separate pure dephasing, inelastic transitions, and coherent time-evolution, we can identify the relative influence of these processes on the control efficiency. This leads to a far more physical picture of the basic processes underlying the perturbations of an environment then what a reduced density matrix description can provide. In utilising the stochastic wave function approach instead of the density matrix formalism, the computations are quite efficient. The stochastic Schrödinger equation is realised by N independent runs, where, in our case, an ensemble size of N = 1000 gives converged results. The efficiency of the laser control process is studied as a function of temperature and collision rates. A rise in temperature (or collision rate) reeffects a stronger fluctuation and thus results in a less efficient transfer by the control field. Though the Gaussian fluctuations used here do not strictly represent 'white'- noise, since a deterministic machine is not able to produce uncorrelated random numbers, an acceptable distribution is achieved by simple procedures. An improvement of the here applied algorithms would, for instance, include a more sophisticated sampling of the dephasing rates. Only one example of a control process is studied here and an application of the developed approach to other problems of quantum control is to be performed. This thesis established a systematic approach to understand quantum control in the presence of an environment. N2 - In der vorliegenden Arbeit wird der Einfluss der Umgebung auf Moleküle und insbesondere der Quantenkontrolle solcher Systeme untersucht. Unterschiedliche Herangehensweisen, System-Bad-Kopplungen zu beschreiben, werden implementiert und angewendet. Die Berücksichtigung eines Dissipationstermes im System-Hamiltonoperator führt zu Energieabgabe und Relaxation in den Grundzustand. Als eine erste Anwendung wird die Isomerisation eines aromatischen Komplexes behandelt. Anhand dieses einfachen Modells ist es möglich, Resultate zeitaufgelöster, spektroskopischer Messungen zu reproduzieren. Weiterhin wird der Einfluss des Rauschens untersucht. Die Einführung von Fluktuationen führt dazu, dass Energie nicht erhalten bleibt und Kohärenz verloren geht. Als ein Beispiel dient hier die Quantenkontrolle eines Populationstransferprozesses im Na2 Molekül. Die Effizienz eines Kontrollprozesses wird in Abhängigkeit der Rauschstärke und verschiedener System-Bad-Kopplungen untersucht. Ausgehend vom ungestörten System wird die Lokale Kontrolltheorie benutzt, um ein Feld, welches selektiv Population in einen einzigen, angeregten Zustand transferiert, zu konstruieren. Die Kopplung an das Bad wird daraufhin eingeschaltet, um die Abhängigkeit der Kopplungsstärke auf die Transfereffizienz zu charakterisieren. Die Störung des Bades beeinflusst das Na2-Molekül dahingehend, dass Potentialkurven und Übergangsdipolmomente verzerrt werden. Eine wichtige Erkenntnis ist, dass bereits elastische Stöße zu einem substantiellen Verlust der Kontrolleffizienz führen. Die am meisten versprechende Methode, welche in dieser Arbeit Verwendung findet, ist die der stochastischen Schrödingergleichung. Sie ist der weitläufig gebräuchlichen Beschreibung von System-Bad-Wechselwirkungen innerhalb des Formalismus der reduzierten Dichtematrix gleichwertig. Dekohärenzen und Dissipationseffekte ausgelöst durch elastische und inelastische Stöße werden innerhalb der stochastischen Gleichungen separat berücksichtigt. Unser Beitrag ist die Einbindung der Laseranregung in das kinetische Monte-Carlo-Schema. Dies ermöglicht die Anwendung des stochastischen Ansatzes auf die Quantenkontrolle des Populationstransfers eines Natriumdimers. Da es innerhalb unserer Beschreibung möglich ist, reine Dephasierungen, inelastische Übergänge und kohärente Entwicklung in der Zeit zu beschreiben, können wir den relativen Einfluss jener Prozesse auf die Kontrolleffizienz identifizieren. Dies führt zu einer physikalischeren Beschreibung der zugrunde liegenden Prozesse, welche die Störungen der Umgebung bewirken, als sich aus einer reduzierten Dichtematrizendarstellung ergibt. Durch Benutzung des stochastischen Wellenfunktionsansatzes anstelle des Dichtematrizenformalismus ergeben sich effiziente Berechnungen. Die stochastische Schrödingergleichung wird für N unabhängige Programmdurchläufe gelöst, wobei in unserem Fall eine Ensemblegröße von N = 1000 konvergente Resultate liefert. Die Wirksamkeit des Laserkontrollprozesses wird anhand von Temperatur und Stoßrate untersucht. Ein Anstieg der Temperatur (oder der Stoßrate) spiegelt höhere Fluktuationen wider und resultiert daher in einem weniger effizienten, von einem Kontrollfeld hervorgerufenen Transfer. Obwohl die gaußverteilten Fluktuationen, welche hier benutzt werden, strenggenommen kein 'Weisses Rauschen' repräsentieren, da eine deterministische Rechenmaschine keine unkorrellierten Zufallszahlen generieren kann, wird dennoch eine akzeptable Verteilung aus einfachen Prozeduren erhalten. Eine Verbesserung der hier angewendeten Algorithmen würde zum Beispiel aus einer verfeinerten Implementierung der Dephasierungsraten bestehen. Lediglich ein Beispiel eines Kontrollprozesses wird hier untersucht und die Anwendung der erarbeiteten Methodik auf andere Fragestellungen der Quantenkontrolle ist noch offen. Diese Dissertation stellt somit eine systematische Annäherung dar, um die Quantenkontrolle in Anwesenheit von Umgebungseinflüssen zu verstehen. KW - Quantenmechanisches System KW - Dissipatives System KW - Quantenkontrolle KW - dissipative Umgebung KW - Quantum dynamics KW - dissipative environments Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-73456 ER - TY - THES A1 - Schöppler, Friedrich Eugen T1 - Photolumineszenzmikroskopie und-spektroskopie halbleitender Kohlenstoffnanoröhren T1 - Photoluminescence microscopy and spectroscopy of semiconducting nanotubes N2 - Im Rahmen dieser Dissertation wurden optische Eigenschaften von halbleitenden, einwandigen Kohlenstoffnanoröhren (SWNTs) der (6,5)-Chiralität untersucht. Dies gelang durch Ensemblemessungen aber vor allem durch den Aufbau eines Mikroskops zur Messung an einzelnen SWNTs. Dieses Einzel- SWNT-Mikroskop ermöglichte nebst „normaler“ Bildgebung durch Sammlung und Abbildung der nahinfraroten Photolumineszenz (PL) der (6,5)-SWNTs auch die spektral- und zeitaufgelöste Untersuchung der PL. Durch Verwendung von Dichtegradientenultrazentrifugation (DGU) zur chiralen Aufreinigung des SWNT-Rohmaterials konnten alle Messungen unter Minimierung des störenden Einflusses von Aggregaten oder SWNTs anderer Chiralität durchgeführt werden. Untersucht und bestimmt wurde der Absorptionsquerschnitt und die Exzitonengröße, die PL-Eigenschaften aggregierter SWNTs und der Einfluß der Permittivität auf die PL einzelner SWNTs. N2 - Within the course of this work fundamental optical properties of semiconducting single-walled carbon nanotubes (SWNTs) of the (6,5)-chirality were examined by utilizing ensemble measurements and in particular a home-built microscope setup for measurements of individual SWNTs. This single-SWNTmicroscope allowed for „standard“ imaging of the near infrared photoluminescence (PL) signal of the (6,5)-SWNTs as well as for spectrally and timeresolved PL measurements. Facilitating density gradient ultracentrifugation (DGU) for chiral enrichment of the SWNT soot, all measurements were carried out with minimum influence of aggregates or minority species of other SWNT chiralities. The absorption cross section, the exciton size, PL-features of aggregated SWNTs and the influence of permittivity on SWNT-PL have been investigated. KW - Mikroskopie KW - Photolumineszenz KW - Photolumineszenzspektroskopie KW - Kohlenstoff-Nanoröhre KW - Halbleiter KW - Spektroskopie KW - NIR-Spektroskopie KW - Lebensdauer KW - Laserinduzierte Fluoreszenz KW - Aggregation KW - Exziton KW - Dielektrizitätszahl KW - microscopy KW - spectroscopy KW - carbon nanotubes KW - fluorescence Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-73329 ER - TY - THES A1 - Schon, Christof T1 - Spektroskopie an substituierten [2.2]Paracyclophanen T1 - Spectroscopy of substituted [2.2]paracyclophanes N2 - In dieser Arbeit wurde der elektronische Grundzustand und der erste angeregte Zustand sowie der Zustand des Ions von substituierten [2.2]Paracyclophanen untersucht. Um die Wechselwirkungen zwischen konjugierten pi-Systemen besser zu verstehen wurden die Moleküle mit Hilfe von Resonance Enhanced Multiphoton Ionization Spektroskopie (REMPI), VUV-Synchrotronstrahlung und quantenchemischen Rechnungen untersucht. Die Experimente wurden im Molekularstrahl durchgeführt. In den [1+1]-REMPI-Spektren von pseudo-para-Dibrom[2.2]paracyclophan, pseudo-para-Dicyano[2.2]paracyclophan, pseudo-ortho-Dicyano[2.2]paracyclophan, pseudo-para-Diphenyl[2.2]paracyclophan und pseudo-para-Di(trimethylsilyl)[2.2]paracyclophan wird ein kontinuierlicher Signalanstieg beobachtet. Individuelle Schwingungsbanden konnte nicht aufgelöst werden. Dies ist ein Hinweis darauf, dass die Schwingungszustände im S1-Zustand sehr eng beieinanderliegen. Der Schwerpunkt dieser Arbeit lag auf der Untersuchung der hydroxysubstituierten [2.2]Paracyclophane pseudo-ortho-Dihydroxy[2.2]paracyclophan (o-DHPC), pseudo-para-Dihydroxy[2.2]paracyclophan (p-DHPC) und racemisches-4-Hydroxy[2.2]paracyclophan (MHPC). Die adiabatischen Ionisierungsenergien der Moleküle wurden aus der Ionenstromkurve mit Hilfe eines Wannier-Fits bestimmt: 7.56eV (o-DHPC), 7.58eV (p-DHPC) und 7.63eV (MHPC). In den Schwellenphotoelektronenspektren (TPES) werden Signalmodulationen im Photonenenergiebereich von 7.8-11eV beobachtet. Hierbei handelt es sich um angeregte Zustände des Kations. Bei ca. 10.5eV wird in den Spektren von allen drei hydroxysubstituierten Molekülen dissoziative Photoionisation (DPI) beobachtet. Hierbei werden die Bindungen zwischen den aliphatischen Kohlenstoff-Atomen gebrochen. Im [1+1]-REMPI-Spektrum des o-DHPCs wird der S1<-S0-Übergang bei 31483cm^-1 (3.903eV) beobachtet. Die berechnete adiabatische Anregungsenergie liegt bei 3.87eV (SCS-CC2). Der elektronische Ursprung des o-DHPCs ist +722cm^-1 blauverschoben im Vergleich zum unsubstituierten [2.2]Paracyclophan (PC). Im REMPI-Spektrum werden viele Schwingungsbanden beobachtet. Cluster des o-DHPCs mit Wasser werden ebenfalls beobachtet. Die elektronischen Ursprünge der Cluster mit Wasser sind rotverschoben im Vergleich mit dem Monomer. Im o-DHPC(H2O)-Cluster ist das Wassermolekül zwischen den beiden OH-Gruppen des Cyclophans über Wasserstoffbrückenbindungen fixiert. In den REMPI-Spektren des o-DHPCs und o-DHPC(H2O)-Clusters wird die Atmungsmode mit hoher Intensität beobachtet. Außerdem tritt eine Twist- und Tilt-Mode in den Spektren auf. Viele Kombinationsbanden der Atmungs, Twist- und Tilt-Mode werden in den Spektren beobachtet. Im [1+1]-REMPI-Spektrum des p-DHPCs werden nur kleine Signalmodulationen mit niedrigen Intensitäten im roten Spektralbereich im Vergleich mit dem Ursprung des o-DHPCs beobachtet. Bei der Anregung des p-DHPCs kommt es zu einer großen Änderung der Struktur. Dies führt dazu, dass die Franck-Condon-Faktoren für den S1<-S0-Übergang des p-DHPCs deutlich kleiner sind im Vergleich mit dem o-DHPC (1:10^7). Daher treten die Signale des p-DHPCs im REMPI-Spektrum nur mit geringer Intensität auf. Der Ursprung des S1<-S0 Übergangs des MHPCs wird im [1+1]-REMPI-Spektrum bei 30772cm^-1 (3.815eV) beobachtet. Die berechnete Anregungsenergie liegt bei 3.79eV (SCS-CC2). Im Vergleich zum unsubstituierten PC wird keine wesentliche Energieverschiebung des S1<-S0-Übergangs beobachtet. Im REMPI-Spektrum des MHPCs wird die Twist-Mode beobachtet. Die Banden zeigen eine inverse Anharmonizität. Die ab-initio-Rechnungen beschreiben die Potentialkurve des S1-Zustands mit einem Doppelminimum. Die Höhe der Barriere zwischen den beiden Minima hängt vom Basissatz ab. Empirisch wurde entlang der Twist-Mode ein flaches Potential bestimmt. Die aus diesem Potenzial resultierenden Banden und Intensitäten der Twist-Mode stimmen mit den experimentellen Beobachtungen sehr gut überein. Die [1+1]-REMPI-Spektren des MHPCs mit einem und zwei Wassermolekülen zeigen einen kontinuierlichen Signalanstieg. Einzelne Schwingungsbanden konnten unter den experimentellen Bedingungen nicht aufgelöst werden. Der Ursprung des MHPC-Clusters mit einem Wassermolekül beginnt bei ca. -180cm^-1 und mit zwei Wassermolekülen bei ca. -290cm^-1 im Vergleich mit dem Ursprung des Monomers. N2 - This thesis examines the electronic ground state, first excited state and ion state of substituted [2.2]paracyclophanes. In order to unterstand the interactions between the two conjugated pi systems, the molecules were investigated by resonance-enhanced multiphoton ionization spectroscopy (REMPI), VUV-synchrotron radiation and quantum chemical calculations. The experiments were carried out in a supersonic jet. In the [1+1]REMPI spectra of pseudo-para-dibromo[2.2]paracyclophane, pseudo-para-dicyano[2.2]paracyclophane, pseudo-ortho-dicyano[2.2]paracyclophane, pseudo-para-diphenyl[2.2]paracyclophane and pseudo-para-di(trimethylsilyl)[2.2]paracyclophane, the signals are increasing almost continuously. Individual vibrational bands could not be resolved. This indicates that there are many closely spaced vibrational transitions. The main focus of this work was the examination of the hydroxysubstituted [2.2]paracyclophanes pseudo-ortho-dihydroxy[2.2]paracyclophane (o-DHPC), pseudo-para-dihydroxy[2.2]paracyclophane (p-DHPC) and racemic-4-hydroxy[2.2]paracyclophane (MHPC). The adiabatic ionization energies of the molecules were determined from a photoionization efficiency curve (PIE), using synchrotron radiation with a Wannier-type fitting procedure: 7.56eV (o-DHPC), 7.58eV (p-DHPC) and 7.63eV (MHPC). In the threshold photoelectron spectra (TPES), signal modulations were observed in the photon energy range of 7.8-11eV. These broad bands were assigned to excited states of the cation. At approximately 10.5eV, dissociative photoionization was observed in the spectra of all three hydroxysubstituted molecules and the bonds between the aliphatic carbon atoms were broken in [2.2]paracyclophanes. In the [1+1]REMPI spectrum of o-DHPC, the origin of the S1<-S0 transition lies at 31483cm^-1 (3.903eV). An adiabatic excitation energy of 3.87eV was computed on SCS-CC2 level. The electronic origin of o-DHPC is 722cm^-1 blue shifted in comparison with the unsubstituted [2.2]paracyclophane (PC). The REMPI spectra of o-DHPC-waterclusters were also recorded. The electronic origins of the clusters are red shifted in comparison with the monomer. In the o-DHPC(H2O)cluster, the water molecule is inserted between the two OH groups of the cyclophane via hydrogen bonds. The number of vibration bands is very high in the [1+1]REMPI spectra. Moreover, considerable activity in a breathing vibration is found in the S1 state of o-DHPC and o-DHPC(H2O). Further vibrations appear in the REMPI spectra of o-DHPC and o-DHPC(H2O) (twist mode and tilt mode). Many combination bands of the breathing, twist and tilt mode also occur in the spectra. In the [1+1]REMPI spectrum of p-DHPC, only small signal modulations with low intensities were observed in the red part, in comparison with the origin of o-DHPC. Drastic structural relaxation upon excitation was found in p-DHPC. Due to a strong structural change, the Franck-Condon factors of p-DHPC were found to be significantly smaller than those in o-DHPC (1:10^7). Therefore, only signals with low intensity were observed in the REMPI spectrum of p-DHPC. The origin of the S1<-S0 electronic transition was located at 30772cm^-1 (3.815eV) in the [1+1]REMPI spectrum of MHPC. The computed excitation energy on SCS-CC2 level is 3.79eV. In comparison with PC, no substantial energy shift of the S1<-S0 origin was observed. A significant geometry change upon electronic excitation indicated by the computations was confirmed by a twist and shift mode in the spectrum. The spacings of the twist bands show an inverse anharmonicity. The ab initio data predict a potential energy curve with a double minimum in the S1 state. The calculated barrier between the two minima depends on the basis set. A shallow potential along the twist coordinate was derived empirically. Good agreement of the resulting bands and intensities of the twist mode with experimental observations was achieved. The [1+1]REMPI spectra of MHPC with one and two water molecules show closely spaced transitions. Individual vibrational bands, however, could not be resolved under the experimental conditions. The signal onset in the cluster channel starts at approximately -180cm^-1 (one H2O) and -290cm^-1 (two H2O) to the red of the monomer origin. KW - Paracyclophane KW - REMPI KW - pi-pi-Wechselwirkung KW - Cyclophane KW - Photoionisation KW - Elektronische Anregung KW - Zwischenmolekulare Kraft KW - Gasphase KW - cyclophanes KW - photoionization KW - electronic excitation KW - pi-pi interaction KW - gas phase Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-65374 ER - TY - THES A1 - Stich, Dominik T1 - Zur Exziton- und Ladungsträgerdynamik in einwandigen Kohlenstoffnanoröhren T1 - Exciton and charge carrier dynamics in single-wall carbon nanotubes N2 - In dieser Dissertation wurde die Exziton- und Ladungsträgerdynamik in halbleitenden und metallischen einwandigen Kohlenstoffnanoröhren (SWNTs) mittels zeitkorreliertem Einzelphotonenzählen (TCSPC) und transienter Absorptionsspektroskopie untersucht. Die Experimente wurden an Tensid- oder DNA-stabilisierten SWNT-Proben in Suspension durchgeführt, in denen durch Dichtegradientenultrazentrifugation (DGU) halbleitende (6,5)-Röhren oder metallische (9,9)-Röhren angereichert wurden. Für die Herstellung der metallischen SWNT-Proben wurde das DGU-Verfahren optimiert. Metallische SWNT-Proben wiesen eine Verunreinigung von etwa 3% halbleitenden SWNTs auf. Von den angereicherten metallischen SWNTs war die (9,9)-Röhre mit einem relativen Anteil von 40% die vorherrschende Chiralität. Für transiente Absorptionsmessungen wurden die metallischen SWNT-Proben zudem durch Filtration aufkonzentriert. Halbleitende (6,5)-Proben wurden mit einem standardmäßig verwendeten Rezept hergestellt. Mit TCSPC-Messungen an (6,5)-Proben wurde erstmals gezeigt, dass halbleitende SWNTs neben der kurzlebigen Fluoreszenz des S1-Exzitons, die auf der ps-Zeitskala abläuft, auch eine langlebig Fluoreszenzkomponente aufweisen. Diese klingt mit t^−1 ab und stammt ebenfalls aus dem S1-Exzitonzustand. Das relative Gewicht der langlebigen Komponente an der Quantenausbeute beträgt (7 ± 2)%. Bei der langlebige Fluoreszenzkomponente handelt es sich um verzögerte Fluoreszenz. Diese entsteht durch die Wiederbesetzung des S1-Zustands aus einem tiefergelegenen Triplettzustand. Der vorherrschende Zerfall des Tripletts skaliert mit t^-0,5 und ist auf das nicht-Fick’sche Diffusionsverhalten der Tripletts zurückzuführen, die an Störstellen gefangen werden und abreagieren. Wird vor dem Übergang in den Grundzustand ein weiteres Triplett eingefangen, so kommt es zu einer Triplett-Triplett-Annihilation, die eine Wiederbesetzung des S1-Zustandes bewirkt. Für die transienten Absorptionsexperimente wurde ein Messaufbau verwirklicht, der Anregung und Abfrage im VIS und NIR Spektralbereich mit einer Zeitauflösung von bis zu 50 fs ermöglicht. Die Detektion des Abfragelichts erfolgt spektral aufgelöst mit einer CCD-Kamera. Der Aufbau ermöglicht Nachweisempfindlichkeiten von bis zu 0,2 mOD bei einer Integrationszeit von einer Sekunde. Durch unterschiedliche Modulation von Anregungs- und Abfragestrahl ist eine Detektion auf der Differenzfrequenz der Modulationen möglich, wodurch Einflüsse des Anregungslichts im Abfragespektrum effizient unterdrückt werden. In transienten Absorptionsexperimenten wurde die Exziton- und Ladungsträgerdynamik der (9,9)-Röhre untersucht. Die transienten Absorptionsdaten wurden mit einer globalen Fitroutine angepasst, der ein Vierniveausystem zugrunde lag. Aus dem globalen Fit sind die Photoanregungsspektren (PAS) - die Beiträge der drei angeregten Niveaus zu den transienten Absorptionsspektren - sowie die Zerfallszeiten zugänglich. Die PAS sind durch die Exzitonresonanz gekennzeichnet. Breite PB-Banden aufgrund der Besetzungsänderung der linearen E00-Bänder sind im Gegensatz zu transienten Absorptionsmessungen an Graphen oder Graphit nicht erkennbar. Die PAS des schnellen und mittleren Zerfalls sind ähnlich und weisen eine starkes PB-Signal bei der Energie des M1-Exzitons der (9,9)-Röhre auf, das von PA-Banden bei höheren undtieferen Energien begleitet wird. Der langsame Zerfall ist hingegen durch eine blauverschobene PB-Bande gekennzeichnet, die nur auf der niederenergetischen Seite mit einem PA-Signal einhergeht. Die Zerfallszeiten nehmen mit steigender Anregungsleistung zu und liegen im Bereich von 30 fs bis 120 fs, 500 fs bis 1000 fs und 40 ps. Die schnelle Zerfallskomponente wird mit der Dissoziation der Exzitonen sowie der Thermalisierung der freien Ladungsträgen in den linearen Leitungsbändern zu einer heißen Ladungsträgerverteilung assoziiert. Die mittlere Zerfallskomponente beschreibt die Abkühlung und Rekombination der freien Elektronen und Löcher. Entscheidender Mechanismus ist hierbei die Streuung an hochenergetischen optischen Phononmoden. Die langsame Zerfallskomponente kann durch langlebige, wahrscheinlich an Störstellen gefangene Ladungsträger erklärt werden, deren elektrische Felder durch den Stark-Effekt das ableitungsähnliche transiente Absorptionsspektrum erzeugen. Mittels transienter Absorptionsmessungen an (6,5)-Röhren wurde aus dem anregungsleistungsabhängigen maximalen PB-Signal des S1-Exzitons die Größe des S1-Exzitons zu (7,2 ± 2,5) nm bestimmt. Aus dem Vergleich der leistungsabhängigen maximalen PB-Signale bei Anregung in das S1- und das S2-Exziton ergibt sich, dass die Konversionseffizienz aus dem S2- in den S1-Zustand 1 ± 0,1 beträgt und innerhalb der experimentellen Zeitauflösung von 60 fs vollständig abläuft. Die Exzitongröße in metallischen (9,9)-Röhren wurde bei Exzitonlebensdauern von 15 fs bis 30 fs zu etwa 7 nm bis 12 nm abgeschätzt. N2 - Within the course of this work, the electron- and exciton-dynamics in metallic and semiconducting single-wall carbon nanotubes (SWNTs) were examined by timecorrelated single-photon counting (TCSPC) spectroscopy and transient absorption spectroscopy. In the experiments surfactant- or DNA-stabilized SWNT-suspensions were used in which the semiconducting (6,5)-chirality or the metallic (9,9)-chirality were enriched by means of density gradient ultracentrifugation. The preparation method for metallic samples was optimized. It yields samples that contain 40% of the predominant (9,9)-chirality and show a contamination with semiconducting SWNTs of only 3%. Metallic SWNT samples for transient absorption experiments were concentrated by filtration. Semiconducting (6,5)-samples were prepared following a standard recipe. TCSPC-measurements on (6,5)-samples revealed that semiconducting SWNTs also exhibit a long-lived fluorescence component besides the short-lived fluorescence of the S1-exciton which emits on the ps-timescale. The long-lived component shows a t^−1 powerlaw decay behavior. It also stems from the S1-exciton state and accounts for (7 ± 2) % of the total quantum yield. The long-lived component is due to delayed fluorescence which is caused by the repopulation of the S1-exciton state from a lower-lying triplet state. The decay of the triplet state scales with t^−0,5 and is due to non-Fickian diffusion of the triplets which eventually get trapped at defect sites and decay. In the case that a second triplet is captured at an already occupied defect site, triplet-triplet-annihilation occurs, which leads to the reoccupation of the S1-exciton state. A transient absorption experiment was set up which allows pumping and probing in the visible and near-infrared spectral range with a temporal resolution of up to 60 fs. The spectrally resolved probe light is detected by a CCD-camera. The experimental setup reaches a detection sensitivity of up to 0,2 mOD at an integration time of one second. The experimental setup also allows for the detection on the difference frequency of the modulated pump- and probe-beams. This strongly suppresses contributions of stray light from the pump beam in the transient absorption spectrum. The exciton and charge carrier dynamics in metallic (9,9)-SWNTs were investigated with transient absorption measurements. A global fit routine, based on a four level model, was applied to the data. The decay times as well as the photo excitation spectra – the contributions of each of the three excited levels to the transient absorption spectra - are directly accessible from the global fit. All photo excitation spectra are dominated by PA- and PB-contributions from the exciton resonance. Broad PB-features due to the population of the linear E00-bands, as evidenced in graphene or graphite, were not found. The photo excitation spectra of the fast and medium decay component are similar. Both exhibit a strong PB-signal at the energy of the M1-excitons of the (9,9)-tube, which is accompanied by PA-Bands on the high and the low energy sides. The slow decay component is characterized by a blue-shifted PB-peak with a PA-band on the low energy side only. The decay times increase with rising excitation power and are in the range of 30 fs to 120 fs, 500 fs to 1000 fs, and 40 ps, respectively. The fast decay is associated with rapid exciton dissociation and thermalization of the charge carriers in the linear bands. The medium decay is governed by cooling of the hot charge carrier distribution and recombination of electrons and holes. Both processes are mediated by high energy optical phonons. The slow decay originates from long-lived charge carriers, likely trapped at defect sites. The derivative-like photo excitation spectrum is a sign of the Stark-effect, caused by the electric field of the charge carriers. Using transient absorption measurements, the size of the S1-exciton in (6,5)-tubes was determined from the excitation dependent maximum of the S1-PB-signal to be (7,2 ± 2,5) nm. Comparing the excitation dependent maximum PB-signal after exciting the S1- or the S2-exciton-states shows that the conversion efficency from the S2- into the S1-exciton state is 1 ± 0,1 and is completed within the experimental temporal resolution of 60 fs. The exciton size in metallic (9,9)-tubes is in the range from 7 nm to 12 nm for excitonic lifetimes of 15 fs to 30 fs. KW - Kohlenstoff-Nanoröhre KW - Verzögerte Fluoreszenz KW - Exziton KW - Kohlenstoffnanoröhre KW - metallisch KW - Exziton KW - verzögerte Fluoreszenz KW - single-wall carbon nanotube KW - metallic KW - exciton KW - delayed fluorescence Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-70193 ER - TY - THES A1 - Buback, Verena Simone [geb. Schulz] T1 - Synthese neuer Cystein-Protease-Inhibitoren sowie deren theoretische und experimentelle Untersuchung hinsichtlich der Struktur-Wirkungs-Beziehung T1 - Synthesis of new Cystein protease inhibitors and their theoretical and experimental investigation regarding the structure activity relationship N2 - Derivate von Vinylsulfonen (VS), die zur Klasse der Michael-Akzeptoren gehören, haben sich in den letzten Jahren als potente irreversible Inhibitoren von Cystein-Proteasen etabliert. Durch einen nucleophilen Angriff des Cys-Restes im aktiven Zentrum der Protease auf das beta-Kohlenstoffatom der C-C-Doppelbindung wird die Protease irreversibel alkyliert. Ziel dieser Arbeit war es, einfache theoretische und experimentelle Methoden zu entwickeln, um erste Schlussfolgerungen hinsichtlich der Reaktivität unterschiedlicher Vinylsulfone ziehen zu können, die zur vollständigen Aufklärung der Struktur-Wirkungsbeziehung von Vinylsulfonen mit diversen Cystein-Proteasen dienen. Im ersten Teil der Arbeit wurden quantenmechanische Rechnungen an kleinen Vinylsulfon-Bausteinen angestellt, um den Einfluss unterschiedlicher Substitutionsmuster an der Sulfoneinheit auf die Reaktionskinetik von Vinylsulfonen zu untersuchen. Anhand der jeweiligen Potentialflächen ließen sich die charakteristischen Punkte der Reaktion, wie der Reaktionskomplex, der Übergangszustand (transition state, TS) sowie das Produkt mitsamt ihren Energien und Geometrien bestimmen. Die Höhe der Energiebarriere, die zum Erreichen des TS überwunden werden muss, die sogenannte Aktiverungsenergie, hängt über die Arrhenius-Gleichung mit den kinetischen Parametern der Reaktion zusammen. Es lässt sich also durch die Kenntnis der Aktivierungsenergien die Reaktivitätsreihenfolge unterschiedlich substituierter Vinylsulfone VS vorhersagen. Im zweiten Teil dieser Arbeit wurden Vinylsulfonbausteine synthetisiert und an separat hergestellte Peptide gekuppelt, sodass potentielle Inhibitoren erhalten wurden. So konnten u.a. die peptidischen Inhibitoren Mu-D-Phe-L-HomoPhe-VS-Me und MP-D-Phe-L-HomoPhe-VS-Me hergestellt werden. Ein zweites Syntheseprojekt beschäftigte sich mit der Kupplung von Peptiden an neue Derivate der trans-Aziridin-2,3-dicarbonsäure. Die synthetisierten Inhibitoren waren Z-Phe-Ala-Azi, Boc-Leu-Pro-Azi und Z-Pro-Leu-Azi. Hierfür wurden die Peptide des Vinylsulfonsprojekts in umgekehrter Aminosäure-Reihenfolge synthetisiert, um sie an die Aziridinbausteine kuppeln zu können. Der dritte Teil der Doktorarbeit befasste sich mit der experimentellen Untersuchung der synthetisierten Vinylsulfonbausteine sowie den erhaltenen peptidischen VS- und Aziridin-basierten Inhibitoren. Es wurden einerseits Enzym-Assays durchgeführt, um die prozentuale Hemmung verschiedener Cystein-Proteasen durch die synthetisierten Moleküle zu messen. Keine der Verbindungen wies jedoch eine signifikannte Hemmung der Proteasen Rhodesain, Falcipain 2 und Cathepsin B auf. Andererseits wurden Modellsysteme entwickelt, um die Kinetik der Reaktionen der Vinylsulfon- und Aziridinbausteine mit einem geeigneten Thiol als Enzym-Imitat zu verfolgen. Ein zielführendes Modell konnte mit Phenylethanthiol in deuteriertem Methanol realisiert werden. Durch Zusatz von NaOH, KOH oder KOtBu konnte zusätzlich die Reaktion mit dem Thiolat untersucht werden. Die Reaktionen wurden sowohl mit IR- als auch NMR-Spektroskopie verfolgt und es wurden die Geschwindigkeitskonstanten 2. Ordnung bestimmt. Auf den ersten Blick konnte mit dem theoretischen Modell der experimentell gefundene Trend nicht vorhergesagt werden. Die Reihenfolge der Sulfonderivate aber, die an der Sulfongruppe ein weiteres Heteroatom tragen, Sulfonester und Sulfonamid, wurde richtig abgeschätzt. Der Unterschied in der Aktivierungsenergie zwischen den Sulfonestern beläuft sich auf 0.7 kcal pro mol. Über die Arrheniusgleichung, ergibt sich bei Annahme desselben Arrhenius-Faktors bei einer Temperatur von 25°C, dass OPhVS um einen Faktor 3 schneller als OMeVS reagieren sollte. Tatsächlich wurde im Experiment ein Faktor von 2.6 gefunden. Aufgrund der unterschiedlichen Substituenten am Stickstoffatom, ist das Amid nicht vollständig mit seinem H-substituierten theoretischen Pendant vergleichbar. Dass das Sulfonamid langsamer als die Sulfonester reagieren, wurde vom theoretischen Modell ebenfalls richtig vorhergesagt. N2 - Derivatives of vinyl sulfones (VS), which belong to the class of Michael acceptors, have been established as potent, irreversible inhibitors of cysteine proteases during the past years. The protease is irreversibly alkylated by the nucleophilic attack of the Cys-residue of the protease's active site at the beta-carbon atom of the C-C-double bond. The objective of this work was the development of simple, theoretical and experimental methods to draw first conclusions concerning the reactivity of diverse vinyl sulfones, which are needed for further investigations to fully understand the complex structure-activity relationship of vinyl sulfones as inhibitors of various cysteine proteases. In the first part of this work, quantum mechanical calculations of small vinyl sulfone entities were conducted in order to investigate the impact of different substitution patterns at the sulfone moiety on the reaction kinetics of vinyl sulfones. By means of the PES characteristic reaction points, such as the reaction complex, the transition state (TS) or the product, including energies and structural parameters, could be determined. The height of the energy barrier to pass the TS, the so-called activation energy, is related to the kinetic parameters of a reaction through the Arrhenius equation. In the second part of this work, the discussed vinyl sulfone building blocks were synthesized and coupled to separately synthesized peptides, yielding potential inhibitors such as Mu-D-Phe-L-HomoPhe-VS-Me and MP-D-Phe-L-HomoPhe-VS-Me. A second synthesis project dealt with the coupling of peptides to new derivatives of trans-aziridine-2,3-dicarbonylic acid. The synthesized inhibitors are Z-Phe-Ala-Azi, Boc-Leu-Pro-Azi, and Z-Pro-Leu-Azi. Additionally, the stated peptides were synthesized with reverse amino acid sequence in order to couple them to the aziridine building blocks. The third part of this phD thesis dealt with the experimental investigation of the synthesized vinyl sulfone building blocks as well as the obtained peptidic VS- and aziridine-based inhibitors. On the one hand, enzymatic assays were carried out, to measure the percentage inhibition of various cysteine proteases caused by the synthesized molecules. Unfortunately, none of the compounds showed significant inhibition of the proteases rhodesaine, falcipain 2 or cathepsine B. On the other hand, model systems were developed to track the reaction kintics of the addition reactions of the vinyl sulfone and aziridine building blocks with a suitable thiol as the enzyme "dummy". A target-aimed model could be realized with phenyl ethane thiol in deuterated methanol. Moreover, by addition of NaOH, KOH or KOtBu, the raction with the respective thiolate could be studied. The reactions were followed by IR- and NMR-spectroscopy and the second order rate constants were determined. The series of the investigated vinyl sulfones with respect to the reactivity towards phenyl ethane thiolate was established. At first glance, the theoretical model was not able to predict the experimentally disclosed reactivity trend. Nevertheless, the order of the sulfone derivatives carrying a hetero atom at the sulfone moiety, sulfone esters and sulfone amide, was estimated correctly. The calculated difference in activation energy between the sulfone esters is 0.7 kcal per mol. Applying the Arrhenius equation under the assumption of identical Arrhenius factors at a temperature of 25°C, OPhVS should react faster than OMeVS by a factor of 3. Indeed, experiments showed a factor of 2.6. Because of the different substituents at the nitrogen atom, the amide is not thouroughly comparable to its H-substituted theoretical pendant. The even slower reaction of the sulfone amide compared to the sulfone esters was still correctly predicted with the theoretical model. KW - Cysteinproteasen KW - Enzyminhibitor KW - Struktur-Aktivitäts-Beziehung KW - cystein protease inhibitor QSAR Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72306 ER - TY - THES A1 - Hemberger, Patrick T1 - Photoionisationsstudien an Radikalen und Carbenen mit VUV-Synchrotronstrahlung T1 - Photoionization Studies on Radicals und Carbenes mit VUV Synchrotron Radiation N2 - Die vorliegende Dissertation untersucht reaktive Intermediaten, speziell Radikale und Carbene und deren Verhalten bei Photoionisation mit VUV-Synchrotronstrahlung. Diese instabilen Verbindungen wurden durch Pyrolyse von teils selbstsynthetisierter Vorläufern in einem kontinuierlichen Molekularstrahl erzeugt und mittels der TPEPICO-Spektroskopie untersucht. Die wichtigsten Ergebnisse dieser Arbeit werden im Anschluss hervorgehoben. Drei Radikale der Zusammensetzung C9H7, Indenyl, 1- und 3-Phenylpropargyl wurden aus ihren bromierten Vorläufern synthetisiert und ihre Ionisierungsenergien bestimmt. Die Frage ob es möglich ist alle drei Radikale hinsichtlich ihrer IE zu unterscheiden und dadurch eine Identifikation in einer Flamme möglich wird, konnte beantwortet werden. Indenyl und 3-Phenylpropargyl besitzen Ionisierungsenergien von 7.53 und 7.20 eV, was eine Erkennung in Flammen prinzipiell möglich macht. Für 1-Phenylpropargyl wurde eine IEad von 7.4 eV gemessen, was eine selektive Identifikation erschwert. Die Messwerte wurden durch quantenchemischen Rechnungen überprüft und sind mit diesen in guter Übereinstimmung. Die Photoionisation von Cyclopropenyliden (IEad = 9.17 ± 0.015 eV) wurde untersucht,wobei eine niederenergetische Bande dem Propargylen (IEad = 9.02 ± 0.02 eV), dem HCCCH Isomer der Zusammensetzung C3H2, zugeordnet werden konnte. Die Schwingungsstruktur des Spektrums konnte erfolgreich simuliert und dadurch die Geometrie des Kations ermittelt werden. Als Nebenprodukt im Molekularstrahl wurde Chlorcyclopropenyliden (IEad = 9.17 ± 0.02 eV) durch seine Schwingungsprogression identifiziert. Die Analyse der dissoziativen Photoionisation gestaltet sich als schwierig, da sowohl c-C3H2 als auch c-C3HCl im relevanten Energiebereich fragmentieren können und die Anwesenheit von HCl die Auswertung ebenfalls erschwert. Ein Lösungsvorschlag für dieses Problem wurde ebenfalls aufgezeigt. Der Einfluss von Substitutionen auf die IE wurde am Beispiel des Propargylradikals und seiner zwei bromierten Analoga erforscht. Dabei wurde eine Rotverschiebung (IEad(C3H3) = 8.71 ± 0.02 eV / IEad(BrCCCH2) = 8.16 ± 0.02 eV / IEad(BrHCCCH) = 8.34 ± 0.02 eV) gemessen. Diese ist auf den elektronenspendenden Charakter des Broms begründet. Beide Brompropargylradikale lassen sich anhand ihrer IE unterscheiden. Die Schwelle zur dissoziativen Photoionisation von C3H2Br zu C3H2 wurde mit 10.1 eV ermittelt, wobei verschiedene Kanäle für diese Reaktion in Frage kommen. Schwingungsaktivität konnte im TPE-Spektrum des Propargylradikals ebenfalls verzeichnet und die v3 +-Mode mit 1950 cm-1 ermittelt werden. Als letztes Projekt stand die Photoionisation des t-Butyl im Fokus, da teils widersprüchliche Messwerte für die IEad in der Literatur publiziert sind. Es konnte ein Wert von 6.75 eV ± 0.03 eV gemessen werden. Die Schwierigkeit bei diesem Experiment ist die Geometrieänderung während der Ionisierung, da das Radikal pyramidal und das Kation eine planare Struktur im C-Gerüst besitzt. Die Grenzen der angewendeten Methoden wurden an diesem Beispiel deutlich gemacht. Zur vollständigen Charakterisierung wurden auch die Vorläufer genau analysiert, da diese durch dissoziative Photoionisation (DPI) Fragmentionen bilden, welche die gleiche Masse besitzen wie die zu untersuchenden Radikale und Carbene. Aus diesen Ergebnissen konnten Bindungsenergien berechnet werden. Von allen untersuchten reaktiven Intermediaten konnten die Ionisierungsenergien mit einer Genauigkeit von ± 20 meV ermittelt werden. Es wurde gezeigt, dass sogar Isomere mit gleicher Molekülmasse unterscheidbar sind. Diese Daten lassen sich verwenden um reaktive Zwischenprodukte in Flammen zu identifizieren. Die Identifizierung ermöglicht es dann geeignete Modelle für Verbrennungsprozesse zu konstruieren oder vorhandene zu verbessern. Diese könnten wiederum helfen die Ruß- und PAK-Bildung besser zu verstehen. Die Ziele dieser Dissertation konnten somit erreicht werden. Massenspektren, welche in Flammen durch VUV-Synchrotronstrahlung aufgenommen wurden, beherbergen eine große Fülle an größeren reaktiven Intermediaten wie beispielsweise das Fluorenyl oder das Biphenylmethylradikal. Deren Ionisation ist bislang nur sehr vage erforscht und wäre deshalb ein interessantes Projekt um diese Arbeit fortzuführen. N2 - This thesis examines reactive intermediates, especially radicals and carbenes and their behavior at photoionization with VUV-synchrotron radiation. Those unstable compounds were produced by pyrolysis of self-synthesizes precursors in a continuous molecular beam and studied by the TPEPICO spectroscopy. The most important results of this work are highlighted below. Three radicals of the composition C9H7, Indenyl, 1- and 3-phenylpropargyl, were synthesized from brominated precursors and their ionization energies were determined. The question, whether these three radicals can be distinguished by their ionization energy and therefore identified in a combustion flame, was answered. Indenyl and 3-phenylpropargyl exhibit ionization energies of 7.53 and 7.20 eV, which make a distinction possible. For 1-phenylpropargyl an IEad of 7.4 eV was measured, which complicates an selective identification. The measurements were also verified by quantum chemical calculations and are in good agreement. The photoionization of cyclopropenylidene (IEad = 9.17 ± 0.015 eV) was reexamined and and a low-energy band was assigned to propargylene (IEad = 9.02 ± 0.02 eV), which is the HCCCH isomer of the composition C3H2. The vibrational structure of the spectrum of c-C3H2 was successfully simulated and the cationic geometry was also determined. As a by-product chlorocyclopropenylidene (IEad = 9.17 ± 0.015 eV) was found and assigned due to its vibrational progression. The analysis of the dissociative photoionization is difficult, because both c-C3H2 and c-C3HCl are able to fragment in the relevant energy range and the presence of HCl complicates the analysis too. A solution of this problem was also mentioned. The influence of substituents on the IE was studied, using the propargyl radical and its two brominated analogs as an example. A redshift (IEad(C3H3) = 8.71 ± 0.02 eV / IEad(BrCCCH2) = 8.16 ± 0.02 eV / IEad(BrHCCCH) = 8.34 ± 0.02 eV) was measured upon Br substitution. It originates from the electron-donating character of the bromine. Both bromopropargyl radicals can be distinguished by their IE. The threshold of dissociative photoionization of C3H2Br was determined to be 10.1 eV, but several channels can produce the C3H2+ fragment. Vibrational activity was found in the TPE spectrum of the propargyl radical and the v3 + mode was identified (1950 cm-1) as well. As a last project the photoionization of the t-butyl was brought into focus, because partly inconsistent measurements of the IEad are published in the literature. A value of 6.75 ± 0.03 eV was measured in this study. The challenge in experiments on this radical is the huge change in geometry, because the neutral is pyramidal while the cation has a planar carbon framework. The limits of the utilized methods were demonstrated using this example. For a complete characterization the precursors were examined too, because the fragment ions, produced by dissociative photoionization (DPI), could falsely be assigned to the radical or carbene. From these results binding energies were calculated additionally. The ionization energies of all examined reactive intermediates could be determined with an accuracy of ± 20 meV. It was shown that even isomers of the same molecular mass are distinguishable. This data can be used to identify reactive molecules in flames. The identification makes it possible to construct reasonable models for combustion processes or to improve available ones. These models could help to improve the understanding of soot and PAH formation. Therefore the aims of this thesis were achieved. Mass spectra recorded in flames by VUV-synchrotron radiation contain a variety of reactive intermediates for example fluorenyl and biphenylmethyl radicals. Their ionization is only vaguely investigated und therefore an interesting project to continue this work. KW - Photoionisation KW - Carbene KW - Synchrotronstrahlung KW - Radikal KW - TPES KW - PES KW - Reaktive Intermediate KW - reactive intermediates KW - photoionization KW - radicals KW - carbenes KW - threshold photoelectron photoion coincidence Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56980 ER - TY - THES A1 - Liu, Wenlan T1 - Exciton Coupling in Valence and Core Excited Aggregates of pi-Conjugated Molecules T1 - Exzitonen-Kopplung in valenz- und rumpfangeregten Aggregaten pi-konjugierter Moleküle N2 - Im Rahmen dieser Arbeit werden theoretische Modelle zur Beschreibung von Valenz- und Rumpf-angeregten elektronischen Zuständen diskutiert. Im Fall der Valenz-Anregungen wurden time-dependend Hartree-Fock (TD-HF) und timedependent Dichtefunktionaltheorie (TD-DFT)Methoden mit verschiedenen Funktionalen für ein Perylenbisimid (PBI) System validiert. Eine einfache Analyse der Charaktäre der angeregten Zustände wurde vorgeschlagen, die auf den berechneten Übergangsdipolmomenten basiert. Dieser Ansatz ist allerdings auf Zustände beschränkt, die ein signifikantes Übergangsdipolmoment aufweisen. Deshalb wurde eine allgemeinere und fundiertere Methode entwickelt, die auf einer Analyse der berechneten CISWellenfunktion basiert. Darüberhinaus wurde ein literaturbekannter Model-Hamiltonoperator Ansatz von einem lokalisierten Molekülorbitalbild (MO) abgeleitet, das aus der generelleren Analyse-Methode resultiert. Auf diesem Weg ist ein Zugang zu diabatischen angeregten Zuständen und korrespondierenden Kopplungsparametern auf der Basis von ab initio Rechnungen gegeben. Für rumpfangeregte elektronische Zustände wurden drei Methoden für C 1s-angeregte und ionisierte Zustände verschiedener kleiner Moleküle validiert. Darüberhinaus wurde die Basissatzabhängigkeit dieser Zustände untersucht. Anhand der Resultate wurde die frozen core Näherung ausgewählt um rumpfangeregte Zustände von Naphthalintetracarbonsäuredianhydrid (NTCDA) zu berechnen. Um experimentelle Ergebnisse zu erklären, wurde ein Algorithmus entwicklet, der die Exzitonenkopplungsparameter im Fall von nicht-orthogonalen MOs berechnet. N2 - This work focuses on theoretical approaches for predicting the valence and core excited states of aggregate systems. For the valence excitations, TD-HF and TD-DFT with different functionals have been tested at the Perylene bisimide (PBI) system. A simple character analysis method based on the calculated transition dipole moments is proposed. However, this method does not work for excited states without any transition dipole moment. Thus, we proposed a more general and more valid method based on a calculated CIS type wavefunction for the character analysis. Furthermore, a model Hamiltonian method is derived from a localized picture. The energies of the diabatic states and the corresponding coupling parameters were also determined on the basis of ab initio calculations. For the core excitation, three different methods were validated for C 1s-excited and ionized states if several small molecules. Also we tested the basis sets dependence of these core excited states. Based on those results, we chose the frozen core approximation method to evaluate the core excited states of NTCDA molecules. In order to explain the findings in the experiments, we developed an algorithm to evaluate the exciton coupling parameter where non-orthogonal MOs are used. KW - Exziton KW - Dichtefunktionalformalismus KW - Hartree-Fock-Methode KW - Aggregat KW - Angeregter Zustand KW - Quantenchemie KW - Förster-Kopplung KW - zeitabhängige Dichtefunktionaltheorie KW - TD-DFT KW - angeregte Zustände in Aggregaten KW - Quamtum chemistry KW - Förster coupling KW - Exciton KW - time-dependent density functional theory KW - TD-DFT KW - excited states in aggregates Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56169 ER - TY - THES A1 - Margraf, Markus Johann T1 - Spektroskopie an π-konjugierten Molekülen T1 - Spectroscopy of π-conjugated molecules N2 - Femtosekunden-zeitaufgelöste transiente Absorptionsspektroskopie einer neutralen organischen gemischtvalenten Verbindung In einem Femtosekunden-zeitaufgelösten Anrege-Abfrage-Experiment wurde die Dynamik des Elektronentransfers einer neutralen organischen gemischtvalenten Verbindung untersucht. Neben der Abhängigkeit des Rückelektronentransfers von der Solvenspolarität wurde auch die Rotationsdiffusion in n-Hexan, Toluol, Dibutylether, tert-Butylmethylether und Benzonitril studiert. Die transiente Dynamik lässt sich mit einer Lebensdauer beschreiben, verursacht durch einen Rückelektronentransfer. Während dieser in unpolaren Lösemitteln relativ langsam verläuft, beobachtet man deutlich schnellere ET-Raten mit steigender Polarität des Lösemittels. Die Lebensdauer variiert von 1.2 ps für Benzonitril bis 260 ps für n-Hexan. Rotationsdiffusion konnte nicht beobachtet werden. Die gemessenen Raten wurden mit theoretischen Raten verglichen. Für unpolare Lösemittel konnte eine gute Übereinstimmung gefunden werden. In polaren Lösemitteln bewirkt eine Korrektur, die die Solvensrelaxationszeit berücksichtigt, eine sehr gute Übereinstimmung von berechneten und gemessenen Rückelektronentransferraten. Zeit- und frequenzaufgelöste Photoionisation des C 2A2-Zustandes des Benzylradikals Die Lebensdauer des C 2A2-Zustandes des Benzylradikals wurde in Abhängigkeit der Überschussenergie bestimmt. Die zeitabhängigen Ionensignale konnten dabei mit einer biexponentiellen Dynamik beschrieben werden. Bei einer Anregung am Ursprung (305nm) betragen die Lebensdauern τ1= 400 fs und τ2 = 4.5 ps. Die kürzere Lebensdauer τ1 beschreibt die interne Konversion vom C-Zustand zu den stark koppelnden A/B-Zuständen, die längere Lebensdauer τ2 die interne Konversion von den A/B-Zuständen in den elektronischen Grundzustand. Mit steigender Anregungsenergie beobachtet man eine stete Abnahme beider Lebensdauern. Bei einer Anregung mit einem Puls der Wellenlänge von 301 nm beobachtet man deutlich kürzere Lebensdauern mit τ1 = 350 fs und τ2 = 2.8 ps. Erfolgt die Anregung mit einem Puls der Wellenlänge von 298 nm, betragen die Zeitkonstanten τ1 = 180 fs und τ2 = 2.1 ps. Desweiteren konnte ein zeitabhängiges Ionensignal für eine Spezies mit der Zusammensetzung C7H5 beobachtet werden. Der Träger des Signals ist das Fulvenallenylradikal. N2 - Femtosecond time-resolved transient absorption spectroscopy of a neutral organic mixed-valenced compound The dynamics of electron transfer of a neutral organic mixed-valence compound was investigated by femtosecond transient absorption spectroscopy. Both dependence of back-electron transfer on solvent polarity and rotational diffusion was studied in n-hexane, toluene, dibutylether, methyl-tert-butyl ether and benzonitrile. The transient kinetics is governed by one time constant which is assigned to back-electron transfer. It ranges from 1.2 ps in benzonitrile to 260 ps in n-hexane. While back electron transfer is slow in non-polar solvents increasing back-electron transfer rates with increasing solvent polarity are observed. No rotational diffusion was observed. The measured rates for back-electron transfer were compared to rates derived from a Golden rule-type expression. Good agreement was achieved with non-polar solvents. In polar solvents, a correction using the solvent relaxation times yielded an excellent agreement between computed and observed back-electron transfer rates. Time- and frequency-resolved photoionization of the C 2A2 state of the benzyl radical The excited state lifetime of the C 2A2 state of the benzyl radical was determined as a function of excess energy. Time-dependent ion traces were fitted using a biexponential decay. At the origin of the C-state, excited state lifetimes of 400 fs and 4.5 ps were assigned to sequential internal conversion processes from the C-state to the A/B states and to the ground state. With increasing excitation, the lifetimes shorten considerably. With excitation at 301 nm the time constants are 350 fs and 2.8 ps. At 298 nm the time constants are 180 fs and 2.1 ps. In addition we observed a decay trace for a species with the composition C7H5. The carrier of the signal is fulvenallenyl. KW - Valenzgemischte Verbindungen KW - Absorptionsspektroskopie KW - Benzylradikal KW - Photoionisation KW - zeitaufgelöste Spektroskopie KW - gemischtvalente Verbindung KW - time-resolved spectroscopy KW - mixed-valence compound KW - benzyl radical Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-54032 ER - TY - THES A1 - Pfister, Johannes T1 - On the correlation between the electronic structure and transport properties of [2.2]paracyclophanes and other aromatic systems T1 - Über die Korrelation zwischen der elektronischen Struktur und den Transporteigenschaften von [2.2]Paracyclophan und anderen aromatischen Systemen N2 - Die vorliegende Arbeit präsentiert theoretische Untersuchungen zu Energie- und Ladungs-Transporteigenschaften in organischen Kristallen. Kapitel 4 behandelt Exzitonentransport in Anthracen bei dem der Fall einer schwachen Kopplung zwischen den π-Systemen vorliegt. Die elektronische Kopplung wird mit dem „monomer transition density“ (MTD) Ansatz berechnet. Aus den Kopplungen und Reorganisationsenergien werden mit der Marcus-Theorie Hüpfraten berechnet. Mit Kenntnis der Kristallstrukturen werden daraus in die experimentell zugänglichen Exzitonendiffusionslängen berechnet, deren isotroper Anteil im Rahmen der Streuung der experimentell zugänglichen Daten reproduziert werden. Auch die Anisotropie der Exzitonendiffusionslängen wird qualitativ und quantitativ im Rahmen der zu erwartenden Messgenauigkeit richtig wiedergegeben. Weiterhin enthält Kapitel 4 Untersuchungen zum Elektronen- und Lochtransport in den zwei verschiedenen Modifikationen (α und β) von Perylen. Reorganisationsenergien sowie Diffusionskonstanten wurden für beide beide Kristallstrukturen und Typen des Ladungstransports berechnet. Den besten Transport stellt dabei Lochtransport in β-Perylen dar, jedoch ist dieser stark isotrop. Die bevorzugte Transportrichtung is entlang der b-Achse der Einheitszelle mit elektronischen Kopplungen von größer als 100 meV. Allerdings gibt es hier keinerlei Lochtransport in Richtung der c-Achse. Die Diffusionskonstante in Richtung der b-Achse ist um zwei Größenordnungen größer als die in c-Richtung (62.7•10-6 m2/s vs. 0.4•10-6 m2/s). Der Ladungstransport wird sowohl für Löcher, als auch für Elektronen in beiden Perylenmodifikationen immer stark anisotrop berechnet. Um diese Resultate zu verifizieren wurden experimentelle Elektronenmobilitäten in α-Perylen mit den Simulationen verglichen. Es stellte sich eine sehr gute Übereinstimmung heraus mit Fehlern von nur maximal 27%. Wie oben gezeigt, ist es möglich Transporteigenschaften in zwischen schwach wechselwirkenden Systemen zu berechnen und zu messen. Allerdings ist es hier schwierig, die Güte der zu Grunde liegenden Kopplungsparameter genau anzugeben. Aus diesem Gunde wurde eine Zusammenarbeit über stark wechselwirkede Systeme zwischen uns sowie den Arbeitskreis von Prof. Ingo Fischer begonnen. Dort wurden [2.2]Paracyclophane und dessen Derivate untersucht um zu zeigen, wie Substitution mit Hydroxylgruppen deren Absorptionseigenschaften beeinflusst. Eine Kombination der SCS-MP2 und SCS-CC2-Methoden liefert hierbei insgesamt die besten Ergebnisse um die geometrischen und elektronischen Strukturen für Grund- und angeregte Zustände dieser Modellsysteme sowie deren Stammmolekülen Benzol und Phenol zu beschreiben. Strukturell weist nur [2.2]Paracyclophan im Grundzustand ein Doppelminimumspotenzial bzgl. Verschiebung und Verdrillung der Benzol/Phenol-einheiten untereinander auf. Alle anderen Systeme sind aufgrund ihrer Substitution weniger flexibel. Fast alle untersuchten [2.2]Paracyclophane zeigen nur geringe Strukturänderungen bei der Anregung in den S1 Zustand: Der Abstand zwischen den Ringen wird kürzer, aber qualitativ behalten sie ihre Verdrillung und Verschiebung bei, wenn auch das Ausmaß dieser Verzerrungen reduziert wird. Die Ausnahme hierbei ist p-DHPC, welches von einer verschoben Struktur im Grundzustand in eine verdrillte Struktur im angeregten Zustand übergeht. Dies hat zur Konsequenz, dass die Intensität des 0-0-Übergangs aufgrund der Franck-Condon Faktoren für p-DHPC experimentell nicht mehr beobachtet werden kann und von Verunreinigungen durch o-DHPC überdeckt wird. Die Strukturen der Paracyclophane und deren Änderung durch elektronische Übergänge werden in dieser Arbeit durch elektrostatische Potenziale sowie den antibindenen (bindenden) HOMO (LUMO) Orbitalen erklärt. Adiabatische Anregungsenergien wurden mit Nullpunktsschwingungsenergien korrigiert und liefern Genauigkeiten deren Fehler weniger als 0,1 eV beträgt. Hierbei ist zu beachten, dass eine Korrektur auf B3LYP Niveau die Ergebnisse verschlechtert und man die Berechnung der Schwingungsfrequenzen auf SCS-CC2 durchführen muss um diese Genauigkeit zu erhalten. Aufgrund dieser Rechnungen wurde eine Interpretation der experimentellen [1+1]REMPI Spektren möglich. Bandenprogressionen für die Schwingungen der Verschiebung, der Verdrillung und einer Atmung im [2.2]Paracyclophanskelett wurden identifiziert und zeigen gute Übereinstimmung zum Experiment. Diese Arbeiten zeigen, dass das Substitutionsschema von [2.2]Paracyclophanen eine erhebliche Auswirkung auf die spektroskopischen Eigenschaften haben kann. Da diese Eigenschaften direkt mit den Transporteigenschaften dieser Materialien verbunden ist, kann das hier gewonnene Verständnis der spektroskopischen Eigenschaften genutzt werden, um Materialien mit maßgeschneiderten Transporteigenschaften zu designen. Es konnte gezeigt werden, dass die SCS-CC2-Methode sehr gut geeignet ist, die zu Grunde liegende Wechselwirkung zwischen den π-Systemen vorherzusagen. N2 - The present work presents investigations on energy and charge transport properties in organic crystals. Chapter 4 treats exciton transport in anthracene, which is an example for weakly coupled π-systems. The electronic coupling parameter is evaluated by the monomer transition density approach. With these and the reorganization energy hopping rates are calculated in the framework of the Marcus theory. Together with the knowledge of the crystal structure, these allow us to calculate the experimental accessible exciton diffusion lengths, whose isotropic part fits nicely within the scattering of experimental values found in the literature. Furthermore, the anisotropy of the exciton diffusion lengths is reproduced qualitatively and quantitatively correct. This chapter also contains studies about electron and hole transport in both polymorphs (α and β) of perylene. Reorganization energies as well as diffusion coefficients for both crystal structures and types of charge transport were calculated. The best transport is hole transport in β-perylene, but it is strongly isotropic. The preferred transport direction is along the b-axis of the unit cell with couplings of greater than 100 meV. However, there is no transport along the c-axis. The diffusion constant in b-direction is bigger by two orders of magnitude than in c-direction (62.7•10-6 m2/s vs. 0.4•10-6 m2/s). Charge transport is calculated to be strongly anisotropic for holes as well as electrons in both modifications. To verify these results experimental electron mobilities have been compared to the simulations. Good agreement was found with errors of less than 27%. As it was shown above, the calculation and measurement of transport properties between weakly coupled systems is possible. However, it is difficult to exactly determine the quality of the electronic coupling. For this reason a collaboration about strongly interacting π-systems was started between us and the research group of Prof. Ingo Fischer. There, [2.2]paracyclophanes and its derivates were investigated to show how hydroxyl substitution influences absorption properties. Overall, a combination of SCS-MP2 and SCS-CC2 performs best to address the description of geometric and electronic structures for both ground and excited states of these model systems as well as their parent compounds benzene and phenol. Only [2.2]paracyclophane shows a double minimum potential regarding a twist and shift motion between the benzene/phenol subunits towards each other. All other systems are less flexible due to their substitution pattern. Almost all [2.2]paracyclophanes display minor changes in their geometric structure upon excitation to the S1 state: The inter-ring distance shortens, but qualitatively they keep their shift and twist characteristics, although the extent of these deformations diminishes. The exception is p-DHPC, which turns from a shifted ground state structure into a twisted excited state structure. Consequently, the intensity of the 0-0 transition cannot be observed experimentally due to small Franck-Condon factors and impurities of o-DHPC. In the present thesis, the structures and their changes due to excitation are explained by electrostatic potentials as well as antibonding (bonding) HOMO (LUMO) orbitals. Adiabatic excitation energies have been corrected by ZPEs and result in accuracies with errors smaller than 0.1 eV. Note that corrections on the B3LYP level worsen the results and one has to apply SCS-CC2 to achieve this accuracy. These calculations allow an interpretation of the experimental [1+1]REMPI spectra. Band progressions of the twist, shift and breathing of the [2.2]paracyclophane skeleton vibrations have been identified and show good agreement to the experiment. This work shows that the substitution pattern in [2.2]paracyclophanes can have a significant impact on spectroscopic properties. Because these properties are directly linked to the transport properties of these materials, the hereby gained insight can be used to design materials with customized transport properties. It was shown that the SCS-CC2 method is very appropriate to predict the interaction between the π-systems KW - Ladungstransport KW - Exziton KW - Paracyclophane KW - Exzitonentransport KW - schwach gekoppelte Regime KW - Anthracen KW - Theoretische Chemie KW - REMPI KW - Coupled Cluster KW - MP-Störungstheorie KW - PI-System KW - exciton transport KW - weak coupling regime Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-65362 ER - TY - THES A1 - Buback, Johannes T1 - Femtochemistry of Pericyclic Reactions and Advances towards Chiral Control T1 - Femtochemie pericyclischer Reaktionen und Fortschritte in Richtung einer chiralen Kontrolle N2 - Pericyclic reactions possess changed reactivities in the excited state compared to the ground state which complement each other, as can be shown by simple frontier molecular orbital analysis. Hence, most molecules that undergo pericyclic reactions feature two different photochemical pathways. In this thesis an investigation of the first nanoseconds after excitation of Diazo Meldrum’s acid (DMA) is presented. The time-resolved absorption change in the mid-infrared spectral region revealed indeed two reaction pathways after excitation of DMA with at least one of them being a pericyclic reaction (a sigmatropic rearrangement). These two pathways most probably start from different electronic states and make the spectroscopy of DMA especially interesting. Femtochemistry also allows the spectroscopy of very short-lived intermediates, which is discussed in context of the sequential mechanism of the Wolff rearrangement of DMA. An interesting application of pericyclic reactions are also molecular photoswitches, i.e. molecules that can be switched by light between two stable states. This work presents a photoswitch on the basis of a 6-pi-electrocyclic reaction, whose reaction dynamics after excitation are unravelled with transient-absorption spectroscopy for both switching directions. The 6-pi-electrocyclic reaction is especially attractive, because of the huge electronic changes and subsequent absorption changes upon switching between the ring-open and ring-closed form. Fulgides, diarlyethenes, maleimides as well as spiropyrans belong to this class of switches. Despite the popularity of spiropyrans, the femtochemistry of the ring-open form (“merocyanine”) is still unknown to a great extent. The experiments in this thesis on this system combined with special modeling algorithms allowed to determine the quantum efficiencies of all reaction pathways of the system, including the ring-closure pathway. With the knowledge of the reaction dynamics, a multipulse control experiment showed that bidirectional full-cycle switching between the two stable states on an ultrafast time scale is possible. Such a controlled ultrafast switching is a process which is inaccessible with conventional light sources and may allow faster switching electronics in the future. Theoretical calculations suggest an enantioselective photochemistry, i.e. to influence the chirality of the emerging molecule with the chirality of the light, a field called “chiral control”. The challenges that need to be overcome to prove a successful chiral control are extremely hard, since enantiosensitive signals, such as circular dichroism, are inherently very small. Hence, chiral control calls for a very sensitive detection as well as an experiment that cancels all effects that may influence the enantiosensitive signal. The first challenge, the sensitive detection, is solved with a polarimeter, which is optimized to be combined with femtosecond spectroscopy. This polarimeter will be an attractive tool for future chiral-control experiments due to its extreme sensitivity. The second challenge, the design of an artefact-free experiment, gives rise to a variety of new questions. The polarization state of the light is the decisive property in such an experiment, because on the one hand the polarization carries the chiral information of the excitation and on the other hand the change of the polarization or the intensity change dependent on the polarization is used as the enantiosensitive probing signal. A new theoretical model presented in this thesis allows to calculate the anisotropic distribution of any given pump-probe experiment in which any pulse can have any polarization state. This allows the design of arbitrary experiments for example polarization shaped pump-probe experiments. Furthermore a setup is presented and simulated that allows the shot-to-shot switching between mirror-images of light polarization states. It can be used either for control experiments in which the sample is excited with mirror-images of the pump polarization or for spectroscopy purposes, such as transient circular dichroism or transient optical rotatory dispersion. The spectroscopic results of this thesis may serve as a basis for these experiments. The parallel and sequential photochemical pathways of DMA and the feasibility of the bidirectional switching of 6,8-dinitro BIPS in a pump–repump experiment on the one hand offer a playground to test the relation of the anisotropy with the polarization of the pump, repump and probe pulse. On the other hand control experiments with varying pump and repump polarization may be able to take influence on the dynamics after excitation. Especially interesting is the combination of the 6,8-dinitro BIPS with the polarization-mirroring setup, because the closed form (spiropyran) is chiral. Perhaps in the future it will be possible to prove a cumulative circular-dichroism effect or even a chiral control with this system. N2 - Pericyclische Reaktionen besitzen unterschiedliche Reaktivitäten im elektronischen Grund- und angeregten Zustand, wie anhand einfacher Grenzorbitalbetrachtungen gezeigt werden kann. Deswegen weisen Moleküle die eine pericyclische Reaktion eingehen meist mehrere photochemische Reaktionspfade auf. In dieser Arbeit wird die Femtochemie von Diazo-Meldrumssäure (DMA) utnersucht. Die zeitaufgelösten Absorptionsänderungen im mittleren Infrarotbereich zeigen tatsächlich zwei Reaktionspfade nach Anregung der DMA, von denen zumindest einer eine pericyclische Reaktion ist (eine sigmatrope Umlagerung). Diese zwei Pfade starten vermutlich von unterschiedlichen elektronischen Zuständen, was die Spektroskopie von DMA besonders interessant macht. Besonders kurzlebige Intermediate oder transiente Zustände können mit Hilfe der Femtochemie auch beobachtet werden, was in Zusammenhang mit der Wolff Umlagerung von DMA gezeigt wird. Eine weitere interessante Anwendung pericyclischer Reaktionen sind die molekularen Schalter, also Moleküle die mit Licht zwischen zwei stabilen Zuständen hin und hergeschaltet werden können. In dieser Arbeit wird ein Photoschalter, 6,8-dinitro BIPS, auf Basis einer 6-pi elektrocyclischen Reaktion vorgestellt, dessen Reaktionsdynamiken nach Anregung mit Hilfe transienter Absorption sichtbar gemacht werden. Die 6-pi elektrocyclische Reaktion ist besonders attraktiv, da mit ihr große elektronische Änderungen und somit auch starke Absorptionsänderungen einhergehen beim Schaltvorgang. Fulgide, Diarylethene, Maleimide und Spiropyrane gehören zu dieser Klasse von Schaltern. Trotz der großen Verbreitung der Spiropyrane ist jedoch bisher die Femtochemie der offenen Form ("Merocyanin") zum großen Teil unbekannt. Die Experimente und Modellierungen an diesem System in dieser Arbeit erlauben die Bestimmung der Quanteneffizienzen aller beteiligten Reaktionspfade beider Schaltrichtungen. Mit diesem Wissen ausgestattet konnte ein Multipulse-Kontroll Experiment durchgeführt werden in dem bidirektional zwischen den beiden Zuständen des Photoschalters auf Pikosekunden Zeitskala hin und hergeschaltet wurde. Dieser Prozess ist mit konventionellen Lichtquellen nicht möglich. Laut theoretischen Rechnungen ist eine enantionselektive Photochemie, also die Beeinflussung der Chiralität von gebildeten Produkten einer Photoreaktion, möglich. Dieses Feld wird "chirale Kontrolle" genannt. Die Herausforderungen eine erfolgreiche chirale Kontrolle zu beweisen sind extrem anspruchsvoll, da enantiosensitive Signale, wie zum Beispiel der Zirkulardichroismus, sehr klein sind. Deswegen ist einerseits eine sehr genaue Detektionsmethode notwendig sowie eine experimentelle Anordnung in der Artefakte direkt ausgeschlossen werden. Für die sehr genaue Detektion wurde in dieser Arbeit ein Polarimeter entwickelt, das zudem für die Kombination mit Femtosekundenlaserpulsen optimiert ist. Dieses Polarimeter wird in Zukunft eine attraktive Detektionsmethode für chirale-Kontrollexperimente sein auf Grund seiner extrem guten Sensitivität. Die zweite Herausforderung eine artefaktfreie experimentelle Anordnung zu finden, eröffnet eine Fülle neuer Fragen. Der Polarisationszustand in diesen Experimenten ist die entscheidende Eigenschaft, da einerseits die Polarisation die chirale Information der Anregung trägt und andererseits die Änderung des Polarisationszustands oder der Intensität benutzt wird als enantiosensitives Abfragesignal. Ein neues theoretisches Modell ist in dieser Arbeit präsentiert, das es ermöglicht die anisotropen Verteilungen beliebiger Anrege-Abfrage Experimente mit beliebigen Polarisationszuständen aller beteiligten Pulse zu berechnen. Das ermöglicht den Aufbau beliebiger Anrege-Abfrage Experimente, z.B. polarisationsgeformte Anrege-Abfrage Experimente. Außerdem wird ein Setup vorgestellt und simuliert, das es ermöglicht Schuss-zu-Schuss zwischen spiegelbildlichen Polarisationszuständen des Lichts hin und herzuschalten. Mit diesem Setup können zum Beispiel Kontrollexperimente durchgeführt werden in denen die Probe mit spiegelbildlichen Polarisationszuständen angeregt wird. Des weiteren können mit dem Setup auch Spektroskopieexperimente durchgeführt werden, wie z.B. transienter Zirkulardichroismus oder transiente optische Rotationsdisperision. Die spektroskopische Ergebnisse dieser Arbeit können als Basis dienen für solche Experimente. Die parallelen und sequentiellen photochemischen Pfade des DMA sowie das bidirektionale Schalten des 6,8-dinitro BIPS in einem Anrege-Wiederanrege Experiment bieten viele Möglichkeiten die neuen Zusammenhänge der Anisotropie mit den Polarisationszuständen des Anrege, Wiederanrege oder Abfragestrahls zu überprüfen. Andererseits könnte man mit Kontrollexperimenten mit variierender Anrege und Wiederanregepolarisation Einfluss nehmen auf die induzierten Dynamiken. Besonders interessant ist hier die Kombination des 6,8-dinitro BIPS mit der Polarisationsspiegelungssetups, weil die geschlossene Form (Spiropyran) chiral ist. Vielleicht ist es mit diesem System tatsächlich in der Zukunft möglich einen kumulativen Zirkulardichroismuseffekt oder sogar eine chirale Kontrolle zu zeigen. KW - Femtosekundenspektroskopie KW - Chiralität KW - Anisotropie KW - Pericyclische Reaktion KW - chirale Kontrolle KW - transiente Absorption KW - molekulare Schalter KW - femtosecond spectroscopy KW - chiral control KW - anisotropy KW - transient absorption KW - molecular switch Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66484 ER - TY - THES A1 - Köhler, Juliane T1 - Dynamik der angeregten Zustände Bor-haltiger pi-Systeme und Donor-substituierter Truxenone T1 - Excited states dynamics of boron containing pi-systems and donor substituted truxenones N2 - Im ersten Teil wurde die Dynamik des ersten angeregten Zustandes von drei Truxenonen untersucht. Nach Anregung im sichtbaren Bereich findet ein Elektrontransfer zwischen den Triarylamin-Donor und dem Truxenon-Akzeptor statt. Um die Abhängigkeit der Rate für den Rücktransfer von der elektronischen Kopplung zu untersuchen, wurde diese zum einen über den Abstand zwischen Donor und Akzeptor und zum anderen über die Position der Verknüpfung eingestellt. In einer ersten Studie wurde Truxenon 1, bei dem der direkt über das Stickstoff-Atom an den Akzeptor gekuppelt ist, mit dem System 2 verglichen, bei den die Einheiten über einen Phenyl-Spacer verbunden sind. Der Rücktransfer sollte dabei für das System 1 schneller sein, da ein kurzer Abstand mit einer starken elektronischen Kopplung einhergeht und damit auch mit einem schnellen Elektronentransfer. Allerdings wird die große Rate für das System mit dem größeren Abstand beobachtet (2). Dieses Ergebnis kann mit der Geometrie der Moleküle und der größeren sterischen Hinderung in 1 erklärt werden, aus der eine geringere elektronische Kopplung resultiert. In einem weiteren Experiment wurde die Stärke der elektronischen Kopplung in Abhängigkeit von der Position der Verknüpfung in Bezug auf den Phenyl-Spacer untersucht. Zu diesem Zweck wurden die Systeme 2 und 3 miteinander verglichen. Während in 2 die Einheiten in para-Position verknüpft sind, sind Donor und Akzeptor in 3 in meta-Position an den Phenyl-Spacer gekuppelt. Letzteres System zeichnet sich dabei durch eine geringere Resonanzstabilisierung aus. Dies hat eine geringere elektronische Kopplung zur Folge, was sich auch in den UV/Vis-Spektren zeigt. Die langwelligste Absorption ist hier bei höheren Energien zu beobachten. Zudem deuten die transienten Spektren an, dass in erster Linie nicht der ladungsgetrennte Zustand abgeregt wird sondern vielmehr die Truxenon-Einheit selbst. Im zweiten Teil wurden die Resonanz-Raman-Spektren vier verschiedener Borole aufgenommen. Dabei wurden zwei signifikanten Moden beobachtet, die beim pi –pi∗ -Übergang in ihrer Intensität verstärkt werden. Eine Bande bei 1598 cm-1 wird der symmetrischen Ringatmung zugeordnet, die aus einer Expansion des Borol-Rings resultiert. Eine zweite Schwingung bei 1298 cm-1 resultiert aus einer B-R Streckschwingung. Für System 5 wird diese Schwingung mit einer hohen Intensität beobachtet, während die Bande bei den Systemen 6-8, die mit einem Aryl-Rest substituiert sind, mit sehr geringer Intensität auftritt und deshalb lediglich mit einem hochauflösendem Setup detektiert werden kann. Aufgrund der schwachen Resonanzverstärkung kann von einer schwachen Wechselwirkung zwischen dem Bor und dem Aryl-Rest ausgegangen werden. In Borol 5, in dem eine Ferrocen-Einheit an das Bor gebunden ist, ist die Situation eine andere: nach Anregung des pi-pi*-Übergangs wird die Population im BC_4-Ring verschoben. Dadurch kann vom Eisen keine Elektronendichte mehr in das p_z-Orbital des Bors verschoben werden, die Fe-B-Wechselwirkung wird geschwächt und der Fe-B-Abstand wird vergrößert. Zusammenfassend konnte gezeigt werden, dass die Eigenschaften des Substituenten großen Einfluss auf die elektronische Struktur eines dreifach-substituierten Bor-Atoms hat, das in einer p_z-pi-Konjugation beteiligt ist. N2 - In the first part the dynamics of the first excited states of the three truxenone systems were investigated. After excitation in the visible regime an electron is transferred from the triarylamine donor to the truxenone acceptor. To elucidate the dependence of the rate for the back electron transfer on the electronic coupling, the latter was adjusted via the distance between the donor and the acceptor and the position of substitution. In a first study the truxenone 1, where the donor is directly coupled to the acceptor via the nitrogen atom, was compared to 2, where the two units are connected via a phenylene spacer. The back electron transfer was expected to be faster for the smaller system 1, since a short distance is correlated with a strong coupling and therefore a fast electron transfer. However, the fast electron transfer is observed for the system with the larger distance, 2. This result is explained with the geometry of the molecules and therefore more steric hinderance for 1 which reduces the electronic coupling. Another experiment was focussed on the strength of the electronic coupling when the two units are connected in different positions regarding the phenylene spacer. Therefore the systems 2 and 3 are compared. In 2 the units are connected in para-position to the spacer whereas in 3 the connection is realized in meta-position. The latter is less stabilized due to its resonance structures. This destabilization results in a weak coupling which is also displayed in the steady state spectrum of compound 3. Here, the lowest wavelength absorption is shifted to higher energies. Furthermore, the transient spectra indicate that the charge separated state is not excited but the truxenone unit itself. This assumption was confirmed by TD-DFT calculations. In the second part the resonance Raman spectra of four boroles were recorded. Here, two significant modes that emerge with enhanced intensity upon pi –pi∗ excitation were observed in the RR spectra of the boroles. A band at 1598 cm−1 is assigned to a symmetrical ring-breathing mode, which is caused by the expansion of the borole ring. Second, the vibration at 1298 cm−1 corresponds to a stretching of the B–R bond. For compound 5 it appears with high intensity, but for compounds 6–8, which yield an aryl substituent, this band appears with low intensity and can only be detected with a high-resolution setup. Because of this small resonant enhancement, only a weak interaction between the boron and the aryl substituent is expected. In borole 5, where a ferrocene unit is connected to the boron, the situation is different: exciting the pi –pi∗ transition causes a change of the population in the BC_4 ring. This prevents the iron from donating electron density to the p_z orbital of the boron. Therefore the Fe–B interaction becomes weak and the Fe–B distance increases. In conclusion, it was shown that the nature of the substituent affects the electronic structure of a tri-substituted boron participating in a p_z-pi conjugation. KW - Borole KW - Angeregter Zustand KW - Resonanz-Raman-Effekt KW - Truxenon KW - Transiente Absorption KW - borole KW - truxenone KW - excited states KW - resonance Raman KW - transient absorption Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-65942 ER - TY - THES A1 - Schilling, Daniel T1 - Zur spektralen Diffusions- und Energietransferdynamik in halbleitenden einwandigen Kohlenstoffnanoröhren T1 - Spectral diffusion and energy transfer dynamics in semiconducting single wall carbon nanotubes N2 - Einwandige Kohlenstoffnanoröhren weisen aufgrund ihrer besonderen Struktur viele für ein rein kohlenstoffhaltiges Makromolekül ungewöhnliche Eigenschaften auf. Dies macht sie sowohl für die Erforschung grundlegender Phänomene in eindimensionalen Nanostrukturen als auch für potenzielle Anwendungen äußerst interessant. Da alle Atome einer SWNT Oberflächenatome sind, führt dies zu einer besonders ausgeprägten Empfindlichkeit ihrer elektronischen Eigenschaften auf Wechselwirkungen mit der Umgebung. Lokale zeitabhängige Änderungen in diesen Wechselwirkungen führen daher zu Phänomenen wie dem Photolumineszenz-Blinken und spektraler Diffusion. Die Erforschung und Kontrolle der Parameter, die für die Beeinflussung der elektronischen Eigenschaften von SWNTs durch Umgebungseinflüsse entscheidend sind, wird neben der spezifischen Synthese eine maßgebliche Rolle dabei spielen, ob und in welcher Form SWNTs in optoelektronischen Bauteilen zukünftig Anwendung finden. Die vorliegende Arbeit liefert einen Beitrag zum Verständnis dieser Wechselwirkungen, indem die Dynamik von Energietransferprozessen innerhalb von SWNTs und zwischen SWNTs untersucht wurde. Im Rahmen dieser Arbeit wurden homogene und inhomogene Beiträge zur Linienverbreiterung von in einer Matrix eingebetteten SWNTs bestimmt. Dabei wurde erstmals beobachtet, dass die spektrale Diffusion sowohl bei Raumtemperatur als auch bei 17 K auf einer ultraschnellen Zeitskala, d. h. innerhalb von weniger als 1 ps abläuft. Mittels transienter Lochbrennspektroskopie konnte gezeigt werden, dass die homogene Linienbreite von (6,5)-SWNTs mit 3.6 meV nur den geringsten Beitrag zur Absorptionslinienbreite liefert, während die größte Verbreiterung mit mehr als 99 % inhomogen ist. Die inhomogene Linienbreite wurde aus inkohärenten 2D-Spektren, welche durch spektrale Lochbrennexperimente bei Variation der Anregungswellenlänge erhalten werden konnten, zu \(54\pm5\)meV bestimmt. Die Dynamik der spektralen Diffusion wird mit einer Exzitonendiffusion in einer durch lokale Umgebungswechselwirkungen verursachten inhomogenen Energielandschaft entlang der Nanorohrachse erklärt. Durch zeitaufgelöste Lochbrennexperimente unter nichtresonanter Anregung konnte gezeigt werden, dass die Populationsumverteilung innerhalb dieser Energielandschaft für eine energetisch abwärts gerichtete Relaxation ein spontaner Prozess ist. Im umgekehrten Fall ist sie dagegen thermisch aktiviert. Mögliche Einflüsse von Artefakten wurden anhand von Referenzmessungen diskutiert und die Bestimmung der homogenen Linienbreite durch komplementäre CW-Lochbrennexperimente ergänzt. Durch Monte-Carlo-Simulationen konnten erstmals Informationen über die Form der Potenzialenergielandschaft entlang einer SWNT erhalten und die Größenordnung der Plateaubreite mit nahezu konstanter Energie innerhalb der Potenziallandschaft zu 5.8-18.2nm ermittelt werden. Dies gelang durch eine Kalibrierung der Simulationszeit anhand experimenteller transienter Absorptionsspektren. Im Rahmen dieses Modells wurde darüber hinaus die Zeit für einen Sprung zu einem benachbarten Gitterplatz der Energielandschaft zu 0.1 ps bestimmt. Inter- und intraband-Relaxationsprozesse von SWNTs wurden mittels Photolumineszenzspektroskopie untersucht. Die Ergebnisse deuten auf eine temperaturunabhängige Effizienz der internen Konversion und die photostimulierte Generierung von Löschzentren hin. Anhand temperaturabhängiger PL-Messungen, die erstmals bei Anregung des \(S_1\)-Zustands durchgeführt wurden, konnte die Energiedifferenz zwischen dem hellen und dunklen Exziton für (6,5)-SWNTs im Rahmen des Modells eines Dreiniveausystems zu \(\delta = (3.7\pm0.1)\)meV bestimmt werden. Aus der guten Übereinstimmung des temperaturabhängigen Trends der PL-Intensität unter \(S_1\)-Anregung mit in früheren Studien erhaltenen Ergebnissen unter \(S_2\)-Anregung konnte geschlussfolgert werden, dass die Effizienz der internen Konversion nicht ausgeprägt temperaturabhängig ist. Für SWNT-Gelfilme wurde unter \(S_2\)-Anregung eine deutliche Abweichung zur \(S_1\)-Anregung in Form eines Bleichens der Photolumineszenz beobachtet. Dieses Phänomen ist in der Literatur wenig diskutiert und wurde daher in leistungsabhängigen PL-Experimenten weiter untersucht. Dabei wurde für die \(S_2\)- im Vergleich zur \(S_1\)-Anregung eine stärker ausgeprägte sublineare Leistungsabhängigkeit gefunden. Die Abweichung vom linearen Zusammenhang der PL-Intensität mit der Leistung trat hier schon bei um eine Größenordnung geringeren Leistungsdichten auf als in früheren Studien und kann mit einer Exziton-Exziton-Annihilation allein nicht erklärt werden. Möglicherweise ist die Öffnung zusätzlicher Zerfallskanäle durch metastabile Löschzentren für dieses Verhalten verantwortlich. Die PL-Experimente zeigten zudem ein zeitabhängiges irreversibles Bleichen unter \(S_2\)-Anregung, welches bei 30 K stärker ausgeprägt war als bei Raumtemperatur. Dessen Abhängigkeit von der eingestrahlten Photonenzahl lässt auf eine Akkumulation von Löschzentren schließen. Daher wird eine mögliche Redoxreaktion mit Wasser, ausgelöst durch die intrinsische p-Dotierung der SWNTs, als Quelle der Löschzentren diskutiert. Das Verzweigungsverhältnis für die Relaxation nach \(S_2\)-Anregung von SWNTs wurde in Form der relativen Quantenausbeute bestimmt und eine nahezu quantitative interne Konversion des \(S_2\)-Exzitons gefunden. Dieses Ergebnis hat eine wichtige Bedeutung für potenzielle Anwendungen von SWNTs in der Photovoltaik, da die Verluste durch die interband-Relaxation bei einer Anregung des zweiten Subband-Exzitons <3% zu sein scheinen. Die Herausforderung des Experiments wird hier durch die geringe Stokes-Verschiebung von SWNTs verursacht, die eine quantitative Trennung von PL- und Streulicht unmöglich macht. Daher wurde ein Aufbau realisiert, in dem ein großer Teil des Streulichts bereits räumlich entfernt wird und die PL unter \(S_1\)- bzw. \(S_2\)-Anregung quantifizierbar und ohne eine Annahme über Streulicht-Anteile direkt vergleichbar ist. Sowohl für SDS- als auch für Polymer-stabilisierte SWNTs wurde eine relative Quantenausbeute von \(\xi \approxeq 1\) erhalten, was eine nahezu quantitative interne Konversion von \(S_2\)- zu \(S_1\)-Exzitonen innerhalb der PL-Lebensdauer nahelegt. Anregungsenergietransferprozesse zwischen Kohlenstoffnanoröhren in mono- und bidispersen SWNT-Netzwerkfilmen definierter Zusammensetzung wurden mittels zeitaufgelöster Polarisationsanisotropie untersucht. Dabei wurden neben einem ultraschnellen Energietransfer in weniger als 1 ps auch Hinweise auf Beiträge des \(S_2\)-Exzitons an diesem Prozess gefunden. Die Ergebnisse der Experimente mit bidispersen SWNT-Netzwerkfilmen bestätigen den auch in PLE-Spektren beobachteten energetisch abwärts gerichteten Energietransfer von SWNTs mit großer zu solchen mit kleiner Bandlücke und liefern darüber hinaus eine Zeitskala von weniger als 1 ps für diesen Prozess. Die umgekehrte Transferrichtung konnte weder aus dem \(S_1\)- noch aus dem \(S_2\)-Exziton beobachtet werden. Eine Beschleunigung der Anisotropiedynamik bei \(S_2\)- im Vergleich zu S\uu1-Anregung deutet auf einen Beitrag des \(S_2\)-Exzitons am Energietransferprozess in Konkurrenz zur internen Konversion hin. Durch Referenzexperimente mit monodispersen Netzwerkfilmen konnte eine Beteiligung von Energietransferprozessen zwischen SWNTs der gleichen Chiralität auf einer Zeitskala von 1-2ps nachgewiesen werden. Dadurch konnten Beobachtungen von zeitabhängigen Anisotropieänderungen, die einen energetisch aufwärts gerichteten Energietransfer suggerieren, mit einem intra-Spezies-Transfer erklärt werden - Hinweise auf energetisch aufwärts gerichtete EET-Prozesse wurden nicht gefunden. Eine wichtige Erkenntnis aus diesen Experimenten ist die Tatsache, dass die Überlappung von Signalbeiträgen zu einer Verfälschung der Anisotropie und damit zu fehlerhaften Interpretationen führen kann. Darüber hinaus wurde auf den Einfluss der Probenheterogenität und der Alterung von SWNT-Netzwerkfilmen hingewiesen. Diese Untersuchungen legen nahe, dass ein effizienter Exzitonentransfer in SWNT-Netzwerkfilmen auch zwischen den einzelnen Röhrensträngen erfolgen kann und es somit möglich ist, die Effizienz entsprechender Solarzellen zu verbessern. Im letzten Teil der Arbeit wurden erstmals transiente Absorptionsexperimente im Femtosekundenbereich mit SWNTs unter \(Gate-Doping\) durchgeführt. In ersten Experimenten konnte gezeigt werden, dass analog zur chemischen Dotierung von SWNTs die Dynamik des \(S_1\)-Bleichens eines (6,5)-SWNT-Netzwerkfilms nach \(S_2\)-Anregung unter \(Gate-Doping\) eine Beschleunigung durch zusätzliche Zerfallskanäle erfährt. Die elektrochemische Bandlücke wurde für (6,5)-Nanoröhren zu 1.5 eV bestimmt. Eine Verringerung der Photoabsorptionsamplitude mit zunehmendem Potenzial lässt Vermutungen über die Natur dieses in transienten Absorptionsexperimenten beobachteten PA-Merkmals in Form der Absorption einer dotierten SWNT-Spezies zu. Diese Untersuchungen liefern erste Einblicke in die Art und Weise, wie eine elektrochemische Modifizierung von SWNTs die elektronische Bandstruktur und Ladungsträgerdynamik verändert. N2 - Due to their unique structure single wall carbon nanotubes exhibit many exceptional properties compared to other carbon based macromolecules. Their striking properties make SWNTs ideal candidates for the investigation of fundamental phenomena in one-dimensional nanostructures as well as for potential applications. Since all carbon atoms are at the SWNT surface their electronic properties are strongly sensitive towards local environmental interactions. Time-dependent local modifications of these interactions result in phenomena like photoluminescence blinking and spectral diffusion. In addition to specific synthesis, the investigation as well as the proper control of the parameters that affect the environmental influence on the electronic properties of SWNTs will be key factors for the question if and how SWNTs will be used in future optoelectronic devices. This thesis contributes to the understanding of these environmental interactions by means of an investigation of energy transfer dynamics within and between SWNTs. Within the scope of this work, homogeneous and inhomogeneous contributions to the line broadening of matrix embedded SWNTs were determined. It was observed for the first time that spectral diffusion takes place on an ultrafast time scale within less than 1 ps both, at room temperature and at 17 K. Transient hole-burning spectroscopy was used to show, that the homogeneous linewidth of (6,5)-SWNTs is 3.6 meV and thus contributes only a small fraction to the absorption linewidth, whereas inhomogeneous broadening represents the largest contribution with more than 99 %. The inhomogeneous linewidth was deduced from incoherent 2D-spectra which were obtained by excitation wavelength dependent hole-burning spectroscopy. The dynamics of spectral diffusion is consistent with an exciton diffusion in an inhomogeneous energy landscape along the SWNT axis, caused by local environmental interactions. Off-resonant spectral hole-burning experiments revealed that a bathochromic spectral diffusion is a spontaneous process, whereas its hypsochromic equivalent is thermally activated. Control experiments were performed to show possible influences of artifacts on the determination of the homogeneous linewidth. The latter was accompanied by means of complementary CW hole-burning spectroscopy experiments. From Monte-Carlo simulations information about the granularity of the potential energy landscape along the SWNT axis was obtained. The width of plateau regions with nearly constant energy was found to be in the range of 5.8-18.2nm. This was accomplished by calibration of the simulation time on the basis of experimental transient absorption spectra. Within this model the time interval for a population hop to adjacent lattice sites was deduced to be on the order of 0.1 ps. Inter- and intraband relaxation processes of SWNTs were investigated by means of photoluminescence spectroscopy. The results suggest that the efficiency of internal conversion is temperature-independent and that quenching centers are generated by irradiation of SWNTs with light. From the PL temperature dependence, which was carried out under \(S_1\) excitation for the first time, the energy splitting \(\delta\) between the bright and dark exciton states for (6,5)-SWNTs was determined. Within the model of a three level system a value of \(\delta = 3.7\pm0.1\)meV was deduced. The good agreement of the temperature dependence of PL intensity under \(S_1\) excitation with previously published studies under \(S_2\) excitation suggests, that the efficiency of internal conversion exhibits no pronounced temperature dependence. A strong PL bleaching was observed for SWNT gelatin films under \(S_2\) excitation, which has not been found in case of \(S_1\) excitation. Since this discrepancy is only little discussed in literature, power dependent PL experiments were performed for further investigation. For \(S_2\) excitation the sublinear power dependence was found to be more pronounced compared to \(S_1\) excitation. The deviation of PL intensity from a linear trend with increasing excitation power occurred at excitation densities which are one order of magnitude lower as compared to earlier studies and cannot be explained by pure exciton-exciton annihilation. Instead, additional relaxation channels seem to be opened, possibly by the formation of metastable quenching species. The PL experiments also revealed an irreversible time-dependent bleaching under \(S_2\) excitation which was found to be more pronounced at 30 K compared to room temperature. The bleaching dependence on the photon number suggests an accumulation of quenching sites. A possible candidate might be a quenching SWNT species formed by a redox reaction with water in presence of intrinsic p-doping. The branching ratio for relaxation after \(S_2\) excitation was determined as the relative PL quantum yield of the second and first subband exciton for which an almost quantitative internal conversion was deduced. This result is important for potential applications of SWNTs in photovoltaic devices since the loss due to interband relaxation of the \(S_2\) exciton seems to be < 3%. The small Stokes shift in SWNTs hampers the quantitative separation of PL and excitation intensity. In order to avoid contributions from scattered excitation light, a setup was implemented that allows spatial removal of a large fraction of excitation intensity. Furthermore, the PL intensity for both excitation pathways can be quantified at the same time within the same setup and without assumptions about stray light contributions. For SDS- as well as polymer-stabilized SWNT dispersions a relative quantum yield of \(\xi \approxeq 1\) was determined which suggests, that internal conversion of \(S_2\) excitons has a quantum yield of almost unity within the PL lifetime. Excitation energy transfer processes between carbon nanotubes in mono- and bidisperse SWNT network films of predefined composition were investigated by means of time-resolved polarization anisotropy. An ultrafast energy transfer within less than 1 ps as well as contributions of the \(S_2\) exciton to EET were found. The results confirm observations of downhill energy transfer in bidisperse network films from larger to smaller bandgap SWNTs as observed in PLE spectra. The transfer occurs in less than one picosecond. An uphill energy transfer from small to large bandgap tubes has been observed neither for \(S_1\) nor for \(S_2\) excitation. An increase of anisotropy decay rate for \(S_2\) excitation suggests a contribution of energy transfer from the \(S_2\) state as a competing pathway. From reference experiments with monodisperse SWNT network films evidence for a contribution of energy transfer between the same SWNT species within 1-2 ps was provided. This explains consistently the observation of an anisotropy decay after excitation of small band gap tubes in bidisperse networks which could be misinterpreted as an uphill energy transfer. One of the key findings in this work is the fact that anisotropy values might be corrupted due to signal overlap in the transient absorption spectra. Furthermore, it was pointed out that effects of sample heterogeneity and film aging might be important in the context of applications of SWNT thin films under ambient conditions. The results suggest that efficient exciton transfer in SWNT network films is possible between individual SWNT fibers, which can help to improve the efficiency of corresponding photovoltaic devices. In the last part of this work transient absorption experiments on the femtosecond time-scale were performed with SWNTs in the presence of gate doping for the first time. The experiments show that analogous to the case of chemical doping the dynamics of the \(S_1\) bleach recovery of a (6,5)-SWNT network film accelerate in the presence of gate doping. This demonstrates that doping opens an additional relaxation channel. The electrochemical band gap was determined for (6,5)-SWNTs from transient absorption spectroscopy to be 1.50 eV. The observation of a decrease in photoabsorption amplitude with increasing potential leads to speculations about the nature of the PA as an absorption of a doped SWNT species. The investigation provides first insight into the way how electrochemical modification of SWNTs alters their electronic band structure and charge carrier dynamics. KW - Einwandige Kohlenstoff-Nanoröhre KW - Photolumineszenzspektroskopie KW - Pump-Probe-Technik KW - Exziton KW - (6,5)-Kohlenstoffnanoröhre KW - Spektrale Diffusion KW - Energietransfer Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-122772 ER - TY - JOUR A1 - Ojha, Animesh K. A1 - Forster, Stefan A1 - Kumar, Sumeet A1 - Vats, Siddharth A1 - Negi, Segeeta A1 - Fischer, Ingo T1 - Synthesis of well-dispersed silver nanorods of different aspect ratios and their antimicrobial properties against gram positive and negative bacterial strains JF - Journal of Nanobiotechnology N2 - In the present contribution, we describe the synthesis of highly dispersed silver nanorods (NRs) of different aspect ratios using a chemical route. The shape and size of the synthesized NRs were characterized by Transmission Electron Microscopy (TEM) and UV-visible spectroscopy. Longitudinal and transverse absorptions bands confirm the rod type structure. The experimentally recorded UV-visible spectra of NRs solutions were fitted by using an expression of the extinction coefficient for rod like nano structures under the dipole approximation. Simulated and experimentally observed UV-visible spectra were compared to determine the aspect ratios (R) of NRs. The average values of R for NR1, NR2 and NR3 solutions are estimated to be 3.0 +/- 0.1, 1.8 +/- 0.1 and 1.2 +/- 0.1, respectively. These values are in good agreement with those obtained by TEM micrographs. The silver NRs of known aspect ratios are used to study antimicrobial activities against B. subtilis (gram positive) and E. coli (gram negative) microbes. We observed that the NRs of intermediate aspect ratio (R = 1.8) have greater antimicrobial effect against both, B. subtilis (gram positive) and E. coli (gram negative). The NRs of aspect ratio, R = 3.0 has better antimicrobial activities against gram positive than on the gram negative. KW - silver KW - nano rods KW - TEM KW - antimicrobial activities KW - nanowire formation KW - gold nanoparticles KW - Raman-scattering KW - nanostructures KW - particles Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-122837 SN - 1477-3155 VL - 11 IS - 42 ER - TY - JOUR A1 - Falge, M. A1 - Engel, V. A1 - Gräfe, S. T1 - Time-resolved photoelectron spectroscopy of coupled nuclear-electronic dynamics JF - EPJ Web of Conferences N2 - We study the effect of nuclear-electron coupling on time-resolved photo-electron spectra, employing a model system which allows to directly comparing spectra resulting from the adiabatic approximation with those obtained within a non-Born-Oppenheimer description. Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-121812 SN - 2100-014X VL - 41 ER - TY - THES A1 - Li, Han T1 - Fabrication of Carbon Nanotube Thin Films by Evaporation-Induced Self-Assembly T1 - Herstellung dünner Kohlenstoffnanorohr-Filme mittels verdunstungsinduzierter Selbstanordnung N2 - In summary, we have prepared single-wall carbon nanotube (SWNT) thin films by the method of evaporation-induced self-assembly (EISA). Using the scalable two-plate or lens setups, sorts of different film types or patterns of SWNTs has been successfully fabricated directly from the evaporation of solvents and could be precisely controlled by the concentrations of SWNT in ambient conditions. The special geometry of meniscus as the capillary bridge has not only given rise to a much higher efficiency of fabrication than what previously reported but also allowed us to monitor the pinning and depinning process carefully and further investigate the mechanism underlying the formation of different film morphologies. In contrast with the conventional "stick-slip" model, we have provided the new dynamical pinning and zipping model for the contact line (CL) behavior. By analyzing the motion of CL and varying deposited patterns, the traditionally so-called "stick" state should be treated as a dynamical pinning process due to the interfacial tension contrast between SWNT-covered and bare silicon surface. Besides, the plausible one-step "slip" motion could be dominated by the zipping-like kink propagation. In addition, the experiments with heated substrates at higher temperatures between 30°C and 50 °C have shown that the striped pattern could be fabricated by both much lower SWNT and SDS concentrations than that in room temperature, which is consistent with our model of interfacial tension contrast. In this situation, the deposition rate was increased but the quality of SWNT alignment was undermined because the corresponding moving velocity of SWNT was also too fast for SWNTs to rotate when the evaporative rate was high. The similar results were identified by the SWNT/polymer conjugates dispersed in chloroform under the similar setups and other identical conditions. The typical breathing motion of dynamical pinning and zipping-like propagation for depinning were confirmed by the new suspensions despite that some morphological parameters changed dramatically compared with that from the aqueous solution. For example, the spacing between stripes reached 100 µm ~ 200 µm because the large contact angle contrast between HDMS- and SWNT-covered surface accompanies with the high evaporation rate of chloroform in the pinning and depinning process. Likewise the average CL velocity for fabrication reached around 20 µm/s due to the much higher evaporation rate of chloroform than water. Using alike suspensions, the modified EISA method called dose-controlled floating evaporative self-assembly (DFES) was employed to implement the self-assembly of SWNTs on the water/air interface and then deposit them on solid substrate by directed floating. Although the stripes were fabricated successfully by drops with certain doses and SWNT concentrations, there inevitably existed randomly oriented SWNTs from the water surface that built networks between the stripes containing well-aligned tubes. In order to slow down the evaporation rate and monitor the process detailedly, we used chlorobenzene as the solvent instead of chloroform and find the typical pinning/depinning movement of the CL. A preliminary analysis of the results in terms of chlorobenzene implied that the CL possibly followed the similar pinning/depinning process in consistence with our model with capillary bridge. In the last part of the thesis, the primary research on the optical properties of these stripes of ultrahigh purity semiconducting nanotubes was conducted by fluorescence microscopy and photoluminescence excitation (PLE) spectroscopy. The energy transfer of the photogenerated excitons was confirmed between different tube species with controlled band gaps. In short, the experiments performed in this thesis allowed to gain new insights about the fabrication of large-area SWNT thin films by the cost-effective solution-processed method and most importantly to uncover its intrinsic mechanism as well. Combined with the separation and selection technique like density gradient centrifugation or polyfluorene derivatives assisted method, highly monodisperse semiconducting nanotubes could be deposited into organized, controllable and functional arrays. Beyond the ambient conditions, precise control for the evaporation under preset temperature and vapor pressure could possibly extend the technique to the industry level. Assisted by some other mature techniques such as roll-to-roll printing, the cost-effective method could be widely used in the manufacture of various thin film devices. More complex 2D or even 3D structures could be designed and accomplished by the method for the functional or stretchable requirements. Further research on the fundamental exciton transition and diffusion in different networks or structures of SWNTs will be the significant precondition for the real applications. Looking ahead, from the individual carbon nanotube to its thin film, this promising material with outstanding properties had many challenges to overcome before the real-world applications. Thanks to the availability of pure and well-defined materials, the scalable solution-processed approaches for fabrication of thin films should be able to unlock the potential of carbon nanotubes and exploit them in (opto-)electronic devices in the foreseeing future. N2 - Im Rahmen der vorliegenden Arbeit wurden über die Methode der Verdunstungsinduzierten Selbstanordnung (evaporation-induced self-assembly, EISA) dünne Filme aus einwandigen Kohlenstoffnanoröhren (SWNTs) hergestellt. Die Verwendung eines individuell anpassbaren Zwei-Platten- oder Linsen-Aufbaus ermöglichte durch präzise Kontrolle der Konzentrationen der verwendeten SWNT-Suspensionen und der unterschiedlichen Reaktionsbedingungen die Herstellung verschiedenster Arten und Anordnungen von SWNT-Dünnfilmen. Durch Ausnützen der speziellen Geometrie des Meniskus einer Kapillarbrücke zwischen zwei Oberflächen konnte nicht nur eine effizientere Herstellung im Vergleich zu früheren Veröffentlichungen erzielt werden, sondern es konnte auch der Mechanismus der Selbstanordnung (Pinning und Depinning) in Abhängigkeit der Reaktionsbedingungen und die resultierende Dünnfilmmorphologie untersucht werden. Es konnte gezeigt werden, dass im Gegensatz zum gängigen "stick-slip" Modell durch ein dynamisches Reißverschluss-Modell (dynamical pinning and zipping model) das Verhalten an der Kontaktlinie (contact line, CL) besser beschrieben werden kann. Eine Analyse der CL-Bewegung unter unterschiedlichen Abscheidungsbedingungen führte zu dem Schluss, dass der bisher verwendete "Stick"-Zustand als dynamischer Pinning-Zustand betrachtet werden sollte, dessen Zustandekommen auf der unterschiedlichen Oberflächenspannung zwischen SWNT-bedeckten und -freien Bereichen auf der Abscheidungsoberfläche beruht. Beim bisher als einschrittige "Slip"-Bewegung beschriebenen Fortschreiten der CL ist dagegen eine Reißverschluss-ähnliche Knick-Bewegung vorherrschend. Weiterführende temperaturabhängige Abscheidungsstudien zur Dünnfilmpräparation konnten zeigen, dass Dünnfilme in Streifenanordnung bei wesentlich geringeren SWNT- und Seifenkonzentrationen im Vergleich zu Raumtemperatur hergestellt werden können. Auch diese Prozesse konnten durch das oben beschriebene Oberflächenspannungskontrastmodell erklärt werden. Die Abscheidungsrate nimmt mit höherer Temperatur zu, wobei die Ordnung der abgeschiedenen SWNTs im Dünnfilm abnimmt, da die Bewegungsgeschwindigkeit hin zur CL im Vergleich zur Rotationsgeschwindigkeit stark zunimmt. Auch für SWNT/Polymer Suspensionen in organischen Lösungsmitteln konnte das Verhalten der CL nach dem dynamischen Reißverschluss-Modell erklärt werden und gestreifte Dünnfilme hergestellt werden. Die Filmmorphologie und der Streifenabstand unterschieden sich jedoch maßgeblich von denen aus wässrigen SWNT Suspensionen hergestellten Dünnfilmen. Hierfür ist auch die mit 20 µm/s sehr hohe Herstellungsgeschwindigkeit verantwortlich. Unter Verwendung der organischen SWNT Suspensionen wurden auch Experimente zu einer von EISA entlehnten Abscheidungsmethode (dose-controlled floating evaporative self-assembly, DFES) durchgeführt. Hierbei wurden gestreifte SWNT Dünnfilme durch SWNT-Selbstanordnung schwimmend an der Flüssig/Luft-Grenzfläche und anschließender Abscheidung auf festem Substrat hergestellt. Auch hier konnte ein CL-verhalten, welches dem dynamischen Reißverschluss-Modell folgt nachgewiesen werden. Detailliertere Betrachtung des Zwischenstreifenraumes zeigte jedoch willkürlich angeordnete SWNTs unabhängig der Herstellungsparameter. Im letzten Teil der Dissertation wurden mittels Fluoreszenz-Anregungs-Spektroskopie und Fluoreszenzmikroskopie die optischen Eigenschaften der Streifen-Dünnfilme, bestehend aus hochaufgereinigten halbleitenden SWNTs untersucht. Bei Streifenmustern aus unterschiedlichen SWNT Spezies konnte ein Energietransfer der exzitonischen angeregten Zustände zwischen SWNTs mit unterschiedlicher Bandlücke nachgewiesen werden. Zusammengefasst lässt sich sagen, dass die im Rahmen dieser Dissertation durchgeführten Experimente ein tieferes Verständnis der Herstellung großflächiger SWNT Dünnfilme durch Entdeckung des zugrundeliegenden Mechanismus ermöglichten. In Kombination mit Auftrennungsverfahren wie Dichtegradientenultrazentrifugation oder Polymer-basierten Ansätzen können so monodisperse, halbleitende SWNTs kontrolliert zu geordneten, funktionellen Arrays angeordnet werden. Präzise Kontrolle der Umgebungsbedingungen, wie Temperatur oder Druck, könnten die Technik auch für industrielle Anwendung interessant machen. Unterstützt durch etablierte Methoden wie dem Rollendruck könnte die kostengünstige Methode großflächig zur Herstellung von verschiedenen Dünnfilmen zur Anwendung kommen. Komplexere, funktionelle, dehnbare 2D oder 3D Strukturen könnten so entworfen werden. Weitere Untersuchungen hinsichtlich der exzitonischen Übergänge und Exzitondiffusion in solchen SWNT-Netzwerken oder -Strukturen wären die Grundvoraussetzung für tatsächliche Anwendungsmöglichkeiten. Vorausschauend lässt sich sagen, dass auf dem Weg von der individuellen Nanoröhre hin zu SWNT Dünnfilmen noch zahlreiche Herausforderungen bestehen, bevor eine reale Anwendung dieser vielversprechenden Materialien möglich erscheint. Durch hochreines und wohldefiniertes Ausgangsmaterial könnte die frei skalierbare Herstellung von SWNT Dünnfilmen über die hier beschriebenen Methoden aber eine Anwendungsmöglichkeit für das lange prognostizierte Potential der Kohlenstoffnanoröhren in (opto-)elektronischen Vorrichtungen in näherer Zukunft ermöglichen. KW - Kohlenstoff-Nanoröhre KW - Carbon Nanotube KW - Evaporation-Induced Self-Assembly KW - thin film KW - verdunstungsinduzierter Selbstanordnung KW - dünner Filme KW - Dünne Schicht KW - Selbstorganisation KW - Verdunstung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123407 ER - TY - THES A1 - Walter, Christof T1 - Excitonic States and Optoelectronic Properties of Organic Semiconductors - A Quantum-Chemical Study Focusing on Merocyanines and Perylene-Based Dyes Including the Influence of the Environment T1 - Exzitonische Zustände und optoelektronische Eigenschaften organischer Halbleiter – Eine quantenchemische Untersuchung mit Fokus auf Merocyaninen und perylenbasierten Farbstoffen unter Berücksichtigung der Umgebung N2 - The scope of computational chemistry can be broadened by developing new methods and more efficient algorithms. However, the evaluation of the applicability of the methods for the different fields of chemistry is equally important. In this thesis systems with an unusual and complex electronic structure, such as excitonic states in organic semiconductors, a boron-containing bipolaron and the excited states of pyracene were studied and the applicability of the toolkit of computational chemistry was investigated. Concerning the organic semiconductors the focus was laid on organic solar cells, which are one of the most promising technologies with regard to satisfying the world's need for cheap and environmentally sustainable energy. This is due to the low production and material costs and the possibility of using flexible and transparent devices. However, their efficiency does still not live up to the expectations. Especially the exciton diffusion lengths seem to be significantly too short. In order to arrive at improved modules, a fundamental understanding of the elementary processes occurring in the cell on the molecular and supramolecular level is needed. Computational chemistry can provide insight by separating the different effects and providing models for predictions and prescreenings. In this thesis, the focus was laid on the description of excitonic states in merocyanines and perylene-based dyes taking the influence of the environment into account. At first, the photochemical isomerization between two configurations of 6-nitro BIPS observed experimentally was studied by first benchmarking several functionals against SCS-ADC(2) in the gas phase and subsequently calculating the excited-state potential energy surface. The geometries obtained from a relaxed scan in the ground state as well as from a scan in the excited state were used. The environment was included using different polarizable continuum models. It was shown that the choice of the model and especially the question of the state specificity of the approach is of vital importance. Using the results of the calculations, a two-dimensional potential energy surface could be constructed that could be used to explain the experimental findings. Furthermore, the importance of the excited-state isomerization as a potential deactivation channel in the exciton transport was pointed out. Then the assessment of the suitability of different merocyanines for optoelectronic applications with quantum-chemical methods was discussed. At first, the effect of the environment on the geometry, especially on the bond length alternation pattern, was investigated. It was shown that the environment changes the character of the ground-state wave function of several merocyanines qualitatively, which means that the results of gas-phase calculations are meaningless - at least when a comparison with solution or device data is desired. It was demonstrated that using a polarizable continuum model with an effective epsilon, a qualitative agreement between the calculated geometry and the geometry in the crystal structure can be obtained. Therefore, by comparing the bond length alternation in solution and in the crystal, a rough estimate of the effect of the crystal environment can be made. It was further shown that the connection between the HOMO energy and the open-circuit voltage is not as simple as it is often implied in the literature. It was discussed that it is not clear whether the HOMO of a single molecule or a $\pi$-stack containing several monomers should be used and if the environmental charges of the bulk phase or the interface should be included. Investigating the dependence of the HOMO energy on the stack size yielded no definitive trend. Furthermore, it was discussed that the effect due the optimization of the modules (solvent, bulk heterojunction) during the production masks any potential correlation between the HOMO energy and measured open-circuit values. Therefore, a trend can only be expected for unoptimized bilayer cells. It was concluded that ultimately, the importance of the HOMO energy should not be overestimated. The correlation between the exciton reorganization energy and the so-called cyanine limit, which is predicted by a simple two-state model, was also discussed. By referring to the results of VB calculations, it was discussed that the correlation indeed exists and is non-negligible, although the effect is not as strong as one might have expected. In this context, a potential application of a VB/MM approach was covered briefly. The importance of the molecular reorganization energy and the device morphology was also discussed. It was concluded that the optimization of merocyanines for organic optoelectronic devices is inherently a multiparameter problem and one cannot expect to find one particular parameter, which solely controls the efficiency. The perylene-based dyes were studied with a focus on the description of a potential trapping mechanism involving an intermolecular motion in a dimer. The aim was to find methods which can be applied to larger model systems than a dimer and take the effect of the environment into account. As a test coordinate the longitudinal shift of two monomers against each other was used. At first, it was demonstrated how the character of an excited state in a dimer can be defined and how it can be extracted from a standard quantum-chemical calculation. Then several functionals were benchmarked and their applicability or failure was rationalized using the character analysis. Two recipes could be proposed, which were applied to a constraint optimization (only intermolecular degrees of freedom) in the excited states of the PBI dimer and to the description of the potential energy surfaces of ground and excited states along a longitudinal displacement in the perylene tetramer, respectively. It was further demonstrated that the semi-empirical OMx methods fail to give an accurate description of the excited-state potential energy surfaces as well as the ground-state surface along the test coordinate. This failure could be attributed to an underestimation of overlap-dependent terms. Consequently, it could be shown that the methods are applicable to large intermolecular distances, where the overlap is negligible. The results of DFT calculations with differently composed basis sets suggested that adding an additional single p-function for each atom should significantly improve the performance. QM/MM methods are ideally suited to take the effect of the environment on a a dimer model system into account. However, it was shown that standard force fields also give an incorrect description of the interaction between the monomers along the intermolecular coordinate. This failure was attributed to the isotropic atom-atom interaction in the repulsion term of the Lennard-Jones potential. This was corroborated using two simple proof-of-principle anisotropy models. Therefore, a novel force field called OPLS-AA_O was presented that is based on OPLS-AA, but uses an anisotropic model for the repulsion. The model involves the overlap integral between the molecular densities, which are modeled as a sum of atom-centered p-type Gaussian functions. It was shown that using this force field an excellent agreement with the DFT results can be obtained when the correct parameters are used. These parameters, however, are not very generalizable, which was attributed to the simplicity of the model in its current state (using the same exponential parameter for all atoms). As a short excursion, the applicability of an MO-based overlap model was discussed. It was demonstrated that the repulsion term based on the density overlap can be used to correct the failure of the OMx methods for the ground states. This is in accord with the assumption that an underestimation of the overlap terms is responsible for the failure. It was shown that OPLS-AA_O also gives an excellent description of the longitudinal shift in a PBI tetramer. Using the tetramer as a test system and applying the recipe obtained in the TDDFT benchmark for the QM-part and OPLS-AA_O for the MM-part in conjunction with an electrostatic embedding scheme, a QM/MM description of the excited states of the PBI dimer including the effect of the environment could be obtained. In the last chapter the theoretical description of the Bis(borolyl)thiophene dianion and the excited states of pyracene were discussed. The electronic structure of the Bis(borolyl)thiophene dianion - a negative bipolaron - was elucidated using DFT and CASPT2 methods. Furthermore, an estimation of the extent of triplet admixture to the ground state due to spin-orbit coupling was given. In the second project the S1 and S2 states of pyracene were computed using SCS-CC2 and SCS-ADC(2) and an estimation for the balance between aromaticity and ring strain was given. This also involved computing the vibrational frequencies in the excited states. In both studies the results of the computations were able to rationalize and complete experimental results. N2 - Die Anwendungsmöglichkeiten der Methoden der theoretischen Chemie können erweitert werden, indem neue Methoden und effizientere Algorithmen entwickelt werden. Es ist jedoch ebenso wichtig die Anwendbarkeit der Methoden für die verschiedenen Felder der Chemie zu evaluieren. In dieser Arbeit wurden Systeme mit einer komplexen und ungewöhnlichen Struktur, wie exzitonische Zustände in organischen Halbleitern, ein bor-basiertes Bipolaron und die angeregten Zustände von Pyracen untersucht und die Anwendbarkeit der verschiedenen Methoden evaluiert. Im Bezug auf die organischen Halbleiter wurde der Fokus auf organische Solarzellen gelegt, welche zu den vielversprechendsten Technologien gehören, um dem weltweiten Bedarf an billiger und ökologisch nachhaltiger Energie zu begegnen. Dies liegt an den niedrigen Produktionskosten und der Möglichkeit flexible und transparente Module zu verwenden. Ihre Wirkungsgrade werden den Erwartungen jedoch noch nicht gerecht. Vor allem die Exzitonendiffusionslängen scheinen deutlich zu gering zu sein. Um verbesserte Module zu erhalten ist ein fundamentales Verständnis der Elementarprozesse in der Zelle auf molekularem und supramolekularem Level vonnöten. Die theoretische Chemie kann dabei helfen dies zu erreichen, indem sie die verschiedenen Effekte separiert und Modelle für Vorhersagen und zur Vorauswahl geeigneter Verbindungen bereitstellt. In dieser Arbeit wurde der Fokus auf die Beschreibung von exzitonischen Zuständen in Merocyaninen und perylenbasierten Farbstoffen unter Berücksichtigung von Umgebungseinflüssen gelegt. Zunächst wurde die experimentell beobachtete photochemische Isomerisierung zwischen zwei Konfigurationen von 6-nitro BIPS untersucht, indem zuerst die Anwendbarkeit verschiedener Funktionale im Vergleich zu SCS-ADC(2) in der Gasphase überprüft wurde und anschließend die Potentialfläche des angeregten Zustands berechnet wurde. Es wurden sowohl die Geometrien aus einem relaxed scan im Grundzustand als auch von einem scan im angeregten Zustand verwendet. Umgebungseffekte wurden unter Verwendung verschiedener Kontinuumsansätze (polarizable continuum models) berücksichtigt. Es konnte gezeigt werden, dass die Wahl des Ansatzes und vor allem die Frage nach der Zustandsspezifizität des Kontinuumsansätze sehr entscheidend ist. Mit den Ergebnissen der Berechnungen konnte eine zweidimensionale Potenzialfläche konstruiert werden, mittels welcher die experimentellen Beobachtungen erklärt werden konnten. Außerdem wurde auf die Bedeutung der Isomerisierung im angeregten Zustand als einem potenziellen Deaktivierungskanal für den Exzitonentransport hingewiesen. Anschließend wurde die Möglichkeit einer Bewertung der Eignung verschiedener Merocyanine für optoelektonische Fragestellungen mit quantenchemischen Methoden diskutiert. Zunächst wurde der Einfluss der Umgebung auf die Geometrie und insbesondere auf die Bindungslängenalternanz untersucht. Es wurde gezeigt, dass die Umgebung die Wellenfunktion mehrerer Merocyanine qualitativ verändert, was bedeutet, dass Berechnungen in der Gasphase keinen Sinn machen - zumindest nicht, wenn die Ergebnisse mit Daten, die in Lösung oder in der Zelle erhalten wurden, verglichen werden sollen. Es konnte gezeigt werden, dass unter Verwendung eines Kontinuumsansatzes mit einer effektiven Dielektrizitätskonstante epsilon eine qualitative Übereinstimmung zwischen der berechneten Geometrie und der Geometrie in der Kristallstruktur erzielt werden kann. Dies ermöglicht es, durch einen Vergleich der Bindungslängenalternanz in Lösung und im Kristall eine grobe Abschätzung für den Einfluss der Kristallumgebung zu erhalten. Es wurde außerdem dargelegt, dass der Zusammenhang zwischen der Energie des HOMOs und der Leerlaufspannung nicht so eindeutig ist, wie es oft in der Literatur suggeriert wird. Es stellte sich die Frage, ob die HOMO-Energie eines einzelnen Moleküls oder eines Stapels bestehend aus mehreren Monomeren verwendet werden sollte und ob der Umgebungseffekt der Ladungen der Bulkphase oder der Grenzfläche berücksichtigt werden sollte. Die Untersuchung der Abhängigkeit der HOMO-Energie von der Anzahl der Monomere ergab keinen klaren Trend. Die Tatsache, dass die Optimierung des Moduls während des Produktionsprozesses (Solvent, Bulk-Hereojunction-Konzept) eine potenzielle Korrelation zwischen der HOMO-Energie und der Leerlaufspannung maskiert, wurde ebenfalls diskutiert. Deshalb kann eine Korrelation nur für nicht optimierte Zweischichtzellen erwartet werden. Es wurde der Schluss gezogen, dass die Bedeutung der HOMO-Energie letztendlich nicht überbewertet werden sollte. Der Zusammenhang zwischen der Exzitonenreorganisationsenergie und dem sogenannten Cyaninlimit, welcher von einem einfachen Zwei-Zustands-Model vorhergesagt wird wurde diskutiert. Unter Verweis auf die Ergebnisse von VB-Berechnungen konnte diskutiert werden, dass der Zusammenhang in der Tat existiert und nicht vernachlässigbar, aber auch nicht so groß ist, wie man vermutet haben könnte. In diesem Kontext wurde die potenzielle Anwendbarkeit eines VB/MM-Ansatzes kurz besprochen. Die Bedeutung der molekularen Reorganisationsenergie und der Morphologie der Zelle wurden ebenfalls diskutiert. Es wurde das Fazit gezogen, dass die Optimierung der Merocyanine für die Anwendung in organischen Halbleitern inhärent ein Multiparameterproblem ist und man nicht erwarten kann, einen einzelnen Parameter zu finden, der allein die Effizienz kontrolliert. Die perylenbasierten Farbstoffe wurden mit dem Fokus auf der Beschreibung eines potenziellen Exzitoneneinfangmechanismus, untersucht, welcher auf der intermolekularen Bewegung in einem Dimer basiert. Das Ziel war es Methoden zu finden, die auf größere Systeme anwendbar sind und den Umgebungseinfluss berücksichtigen können. Als Testkoordinate wurde die longitudinale Verschiebung der Monomere gegeneinander verwendet. Zunächst wurde gezeigt, wie der Charakter eines angeregten Zustandes in einem Dimer definiert werden kann und wie ein Maß für den Charakter ausgehend von einer normalen quantenchemischen Berechnung erhalten werden kann. Anschließend wurden verschiedene Funktionale evaluiert und ihre Anwendbarkeit beziehungsweise ihr Versagen mittels der Charakteranalyse rationalisiert. Zwei Ansätze konnten vorgeschlagen werden, welche auf eine Optimierung in den angeregten Zustände des Dimers mit Nebenbedingung (nur intermolekulare Freiheitsgrade) beziehungsweise auf eine Beschreibung der Potenzialflächen des Grundzustandes und der angeregten Zustände für die longitudinale Verschiebung in einem Perylentetramer angewendet wurden. Es wurde außerdem gezeigt, dass die semiempirischen OMx Methoden keine akkurate Beschreibung der Potenzialflächen der angeregten Zustände sowie des Grundzustandes für die Testkoordinate liefern. Dies konnte mit der Unterschätzung der intermolekularen Überlappterme begründet werden. Folglich war es möglich zu zeigen, dass die Methoden für intermolekulare Abstände, bei denen der Überlapp vernachlässigbar ist, anwendbar sind. Die Ergebnisse von DFT-Rechnungen mit unterschiedlich zusammengesetzten Basissätzen ließen ferner den Schluss zu, dass das Hinzufügen einer einzelnen p-Funktion an jedem Atom eine deutliche Verbesserung bringen sollte. QM/MM-Methoden sind ideal geeignet, um den Einfluss der Umgebung auf ein Dimer-Modellsystem zu berücksichtigen. Es wurde jedoch gezeigt, dass gängige Kraftfelder ebenfalls eine inkorrekte Beschreibung der Wechselwirkung zwischen den Monomeren entlang der intermolekularen Koordinate liefern. Dies wurde mit der isotropen Beschreibung der Atom-Atom-Wechselwirkung im Repulsionsterm des Lennard-Jones-Potenzials begründet. Diese Annahme wurde durch die Anwendung zweier Proof-of-Principle-Ansätze untermauert. Folglich wurde ein neues Kraftfeld, genannt OPLS-AA_O, eingeführt, welches auf OPLS-AA basiert, aber eine anisotrope Modellierung der Repulsion verwendet. Diese anisotrope Repulsion basiert auf dem Überlappintegral der molekularen Elektronendichten, welche als Summe aus atomzentrierten p-artigen Gaußfunktionen modelliert wird. Es wurde gezeigt, dass mit diesem Kraftfeld eine hervorragende Übereinstimmung mit den DFT-Ergebnissen erhalten werden kann, wenn die richtigen Parameter verwendet werden. Diese Parameter sind jedoch nicht sehr generalisierbar, was mit der Einfachheit des Models zu seinem momentanen Stand begründet wurde (Verwendung desselben Parameters im Exponenten bei allen Atomen). Als kurzer Exkurs wurde die Anwendbarkeit eines MO-basierten Überlappmodells diskutiert. Es konnte nachgewiesen werden, dass der Repulsionsterm, der auf der Dichteüberlappung basiert, auch als Korrekturterm für die Anwendbarkeit der OMx-Methoden bezüglich des Grundzustandes verwendet werden kann. Dies deckt sich mit der Annahme, dass eine Unterschätzung von Überlapptermen für das Versagen der semiempirischen Methoden verantwortlich ist. Es wurde gezeigt, dass OPLS-AA_O die Potenzialfläche für die longitudinale Verschiebung in einem PBI Tetramer exzellent beschriebt. Unter Verwendung des Tetramers als Testsytem und unter Anwendung eines der vorgeschlagenen TDDFT-Ansätze für den QM-Teil und OPLS-AA_O für den MM-Teil in Verbindung mit einem electrostatic embedding-Ansatz konnte eine QM/MM-Beschreibung der angeregten Zustände des PBI Dimers unter Berücksichtigung des Umgebungseinfluss erhalten werden. Im letzten Kapitel wurde die theoretische Beschreibung des Bis(borolyl)thiophendianions und von Pyracen diskutiert. Die elektronische Struktur des Bis(borolyl)thiophendianions wurde beschrieben unter Verwendung von DFT- und CASPT2-Methoden. Außerdem wurde eine Abschätzung des Ausmaßes der Triplettbeimischung zum Grundzustand durch die Spin-Bahn-Kopplung gegeben. Im zweiten Projekt wurden der S1- und S2- Zustand des Pyracens unter Verwendung von SCS-CC2 und SCS-ADC(2) berechnet und eine Abschätzung des Verhältnisses von Aromatizität und Ringspannung gegeben. Dies beinhaltete auch die Berechnung der Schwingungsfrequenzen im angeregten Zustand. In beiden Studien konnten die Ergebnisse der Berechnungen die experimentellen Daten vervollständigen und rationalisieren. KW - Exziton KW - Angeregter Zustand KW - Quantenchemie KW - organic semiconductors KW - organische Halbleiter Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123494 ER - TY - THES A1 - Rühl, Nicolas T1 - Spektroelektrochemie an einzelnen (6,5)-Kohlenstoffnanoröhren T1 - Spectroelectrochemistry of single (6,5)-carbon nanotubes N2 - Im Rahmen der vorliegenden Arbeit wurde durch einzelmolekülspektroskopischer bzw. -mikroskopischer Methoden in Kombination mit einer mikrofluischen Zel- le unter Potenzialkontrolle die Elektrochemie von einzelnen einwandigen (6,5)- Kohlenstoffnanoröhren untersucht. Hierfür wurde ein Nahinfrarot-Photolumineszenz- Mikroskop aufgebaut und eine speziell an die experimentellen Vorgaben angepasste elektrochemische Zelle entwickelt, insofern als drei Elektroden (Arbeits-, Gegen- und Referenzelektrode) in einen mikrofluidischen Chip integriert wurden. Darüber hinaus war für die Durchführung der Experimente unter Wasser- und Sauerstoffaus- schluss die Konstruktion eines Handschuhkastens notwendig, sowie eine allgemeine Vorbehandlung der Elektrolytlösungen zur Entfernung gelöster Gase und Wasserreste. Ein weiteres Projekt umfasste den Aufbau einer chemischen Gasphasenabschei- dungsapparatur zur Synthese von Kohlenstoffnanoröhren. Die hierbei durchgeführten Experimente erbrachten Klarheit über den Einfluss der Prozessparameter Druck, Temperatur und Durchflussrate an Edukten. Aus den PL-Intensitätsänderungen bei Potenzialvariation konnten Reduktions- und Oxidationspotenziale (ERed = 0.15 V; EOx = 1.34 V) einzelner (6,5)-SWNTs gegen- über einer Platin Referenzelektrode und einem daraus resultierenden Redoxpotenzial von ∆ERedOx = 1.19 V ermittelt werden. Durch diese einzelmolekülspektroskopische Methode konnte zum einen gewährleistet werden, dass nur dieser spezielle Chira- litätstyp untersucht wurde und zum anderen eine Verfälschung der Resultate durch einen Potenzialabfall wie er typischerweise in CNT-Filmen auftritt aussgeschlossen werden. Eine Kombination der PL-Daten mit der Ramanintensitätsabhängigkeit des (6,5)-SWNT-S2-Übergangs bei Potenzialvariation erlaubte eine genauere Analyse des Löschmechanismus der PL von Kohlenstoffnanoröhren. Mithilfe eines von Her- tel et al. entwickelten diffusionslimitierten Stoßdesaktivierungsmodells konnte eine invers-quadratische Proportionalität zwischen der (6,5)-SWNT-Emission und den spannungsinduzierten Ladungsträgern ausgemacht werden. Auf Grundlage dieses Ergebnisses folgt, dass die über Photolumineszenzänderungen ermittelten Reduktions-und Oxidationswerte nicht mit den Bandkanten der CNTs übereinstimmen müssen, und dass für deren Bestimmung vielmehr auf Raman- bzw. Absorptionsspektroskopi- sche Techniken zurückgegriffen werden muss. Die einzelmolekülspektroskopische Herangehensweise ermöglichte ferner eine statis- tische Analyse der Verteilung der Reduktions- und Oxidationspotenziale im Vergleich zu den jeweiligen Erwartungswerten. Hierdurch konnte eine Einteilung der Modifika- tionseinflüsse auf das SWNT-Redoxverhalten in zwei Grenzfälle erfolgen. Es wurde angenommen, dass diese als “Dispergiermitteleffekte” und “CNT-Strukturdefekte” be- zeichneten Auswirkungen entweder das Resultat einer heterodispersen Verteilung an DOC auf der CNT-Oberfläche oder eine Folge von Defekten in der CNT-Gitterstruktur waren. In diesem Zusammenhang ergab sich aus der interpartikulären Analyse der Reduktions- und Oxidationswerte eine Korrelation, die einem dominierenden Einfluss der “CNT-Strukturdefekte” zugeordnet werden konnte. Dieser Beobachtung entgegen- gesetzt konnten aber auch über Untersuchungen der Redoxpotenziale innerhalb einer (6,5)-SWNT lokale Bereiche ausgemacht werden, die eine signifikante Abhängigkeit von “Dispergiermitteleffekte” aufwiesen. Abgesehen von diesen Einflüssen auf den Emissionsverlauf wurde auch eine Be- trachtung der Breite des spannungsgesteuerten Emissionsabfall durchgeführt. Da- raus konnte ermittelt werden, dass diese Ausdehnung eine Konsequenz aus der PL- Löschungseffizienz der Ladungsträger ist und, dass bei einer Verteilung von 0.32 Löschzentren pro Nanometer eine vollständige Abnahme der Photolumineszenzinten- sität induziert wird. Darüber hinaus wurde im Rahmen dieser Arbeit das redoxchemische Verhalten in- dividueller (6,5)-SWNTs in Wechselwirkung mit Ferrocenmolekülen untersucht. Die erhaltenen Ergebnisse ließen annehmen, dass die sich ausbildende Verbindung nicht-kovalenter Natur ist. Zwei verschiedene Gründe führten zu dieser Erkennt- nis: einerseits ließen sich die Ferrocenmoleküle von der CNT-Oberfläche durch ein Durchspülen des mikrofluidischen Kanals mit einer reinen DMF-Lösung entfernen und andererseits war keine dauerhafte Emissionsminderung durch die Ausbildung kovalenter Bindungen zu beobachten. Aus der potenzialabhängigen PL wurde zudem ein Elektronentransfer der Ferrocenmoleküle in die optisch generierten Löcher des CNT-Valenzbandes festgestellt und über eine anregungsintensitätsabhängige Messung die Zunahme dieses Ladungstransfers bei steigendem Photonenfluss nachgewiesen. Hinsichtlich der Anwendung von Kohlenstoffnanoröhren zur Elektrolyse bzw. Photo- lyse von Wasser wurde auch die Redoxchemie von (6,5)-SWNTs in diesem Solvens untersucht. Bezüglich der Emissionsintensität konnte gezeigt werden, dass diese im Vergleich zu organischen Lösungsmitteln reduziert vorliegt. Außerdem wurde eine irreversible Reaktion nach anodischer Polarisation über eine dauerhafte Löschung der PL beobachtet. Die Bestimmung der hierfür notwendigen Reaktionsumstände erbrachte, dass Wasser, Exzitonen (erzeugt durch optische Anregung) und spannungs- induzierte Löcher im Valenzband zur Bildung einer [SWNT(Q)]-Spezies führen, welche die irreversible Minderung der CNT-Emission verursacht. Darüber hinaus konnte die Reaktionsgeschwindigkeit über eine Kinetik pseudo-nullter-Ordnung be- schrieben werden, unter der Voraussetzung, dass die soeben genannten Parameter konstant verblieben. Desweiteren zeigte sich in einer ferrocenhaltigen Lösung, dass der Löscheffekt der [SWNT(Q)]-Spezies im anodischen Potenzialbereich teilweise reduziert wird. Es wurde angenommen, dass diese Beobachtung auf eine Oxidation der Löschzentren durch die Fc+-Kationen gründet. Mit Hilfe der CVD-Apparatur gelang es Kohlenstoffnanoröhren zu synthetisieren, wobei Ethanol als Kohlenstoffquelle und ein Eisen-Kobalt-Zeolith-Gemenge als Ka- talysator diente. Die Analyse der verschiedenen Prozessparameter zeigte, dass bei T = 750 °C das beste Verteilungsverhältnis zwischen den gewünschten (6,5)-SWNTs und anderen CNT-Chiralitäten bzw. dem amorphen Kohlenstoff vorliegt. Hierfür war, dass bei T < 750 °C die Verbrennung unerwünschter amorpher Kohlenstoffreste nur geringfügig stattfindet, und dass bei T > 750 °C die Bildung anderer Chiralitäten mit größerem Durchmesser als die (6,5)-SWNT bevorzugt wurde. Die Variation der Durchflussrate hingegen wirkte sich nur in einer absoluten Zunahme aller Chirali- täten aus. Die Steigerung des (6,5)-SWNT-Anteils für höhere Durchflüsse gelang trotzdem durch die geschickte Auswahl geeigneter Druck- und Temperaturwerte. Die Experimente zur Untersuchung der Druckabhängigkeit wiesen auf eine Relation mit dem Gesetz von Le Chatelier hin, insofern als bei einer Druckverringerung eine Verschiebung der Ethanol-Crackreaktion auf Produktseite stattfand. In diesem Zusam- menhang wurde angenommen, dass die damit verstärkt gebildeten Moleküle Ethan, Ethen und Methan den CNT-Anteil zwar erhöhen, jedoch auch eine Steigerung der amorphen Kohlenstoffkonzentration verursachen. Dementsprechend ergab ein Druck von p = 9 mbar das beste (6,5)-SWNT zu dem amorphen Kohlenstoffverhältnis. Anhand der Arbeiten in dieser Dissertation sind neue Erkenntnisse zwischen der PL-Sensitivität von (6,5)-SWNTs und deren Ladungszustand erhalten worden. Insbe- sondere die genaue Bestimmung der Korrelation zwischen der Photolumineszenz und den induzierten Ladungsträgern ermöglicht einen gezielteren Einsatz von Kohlenstoff- nanoröhren – so zum Beispiel im Bereich der Sensorik. In diesem Zusammenhang zeigen auch die interpartikulären Analysen der Redoxpotenzialverteilung die genau- en Auswirkungen vom Lösungsmittel und der Defektdichte auf die elektronische Struktur der CNTs auf. Darüber hinaus kann aus der Ursachenbestimmung für die Varianz der literaturbekannten Reduktions- bzw. Oxidationspotenziale fortan die ge- eignete spektroskopische Methode zur Evaluierung der Position von Leitungs- und Valenzband in Kohlenstoffnanoröhren besser eingegrenzt werden. Die spektroelektro- chemischen Analysen von (6,5)-SWNTs im Lösungsmittel Wasser und speziell die Bestimmung der Kinetik für die auftretende Reaktion liefern einen tieferen Einblick in die Wechselwirkung (6,5)-SWNT-H2O. Diese Ergebnisse sind insbesondere bei der Verwendung von Kohlenstoffnanoröhren als Elektrodenmaterial für die photolytische bzw. elektrolytische Spaltung von Wasser in Wasserstoff und Sauerstoff von Bedeu- tung. Neben der Untersuchung der SWNT-Wasser Interaktion unter andoischer und optischer Anregung, die zu einer kovalenten Bindung führte, wurde mit Hilfe der (6,5)- SWNT-Ferrocen Wechselwirkung ein Beispiel für eine nichtkovalente Redoxreaktion dargestellt, womit ein Vergleich dieser beiden Spezies und ihrer unterschiedlichen Auswirkungen auf die elektronische Struktur aufgezeigt werden konnte. N2 - In the present study the electrochemistry of individual (6,5)-single wall carbon nano- tubes was investigated using a combination of electrochemical methods and single molecule fluorescence spectroscopy and microscopy. For this purpose a near infrared photoluminescence microscope was built and an electrochemical cell incorporated into a microfluidic chip was designed. To exclude oxygen and water during the ex- periments a glove box was constructed and for the electrolyte solutions a general preparation routine was executed, which included a degassing and drying of the solvent. A further project of this thesis was the design of a chemical vapor deposition apparatus to synthesize carbon nanotubes. The experiments provided clarity on the influence of process parameters such as pressure, temperature and flow rate of the reactants. The emission changes due to potential variation allowed for the determination of the reduction ERed = 0.15 V and oxidation potential EOx = 1.34 V of individual (6,5)- SWNTs with reference to a platinum electrode. Accordingly a total redoxpotential of ∆ERedOx = 1.19 V was obtained. The single molecule spectroscopic approach ensured further that only one specific CNT-chirality was investigated and that no potential drop like in CNT-films occured. The combination of the PL data and Raman intensity dependencies of the (6,5)-SWNT-S2-transition at potential changes allowed to define the quenching mechanism of the CNT emission. With the use of a difusion limited contact quenching model from Hertel et al. an inverse square proportionality between the (6,5)-SWNT emission and the charge carrier density was shown. Therefore it was concluded that the reduction and oxidation values obtained by emission changes do not correspond to the bandedges of the CNTs and that a determination of the bandgap should be done through absorption or Raman spectroscopy. The interparticle analysis of the (6,5)-SWNT reduction and oxidation potential sho- wed an absolute potential variation with respect to the reference values. The influences for this changes were classified into two cases: the so called “dispersing agent effects” and the “CNT structure defects”. It was assumed that these were a result of unequal distributed dispersing agents on the CNT surface or defects in the CNT lattice structure. Further, the interparticle determined correlation between reduction and oxidation values was attributed to the “CNT structure defects” and was therefore assumed to exercise the most dominant influence. Conversely, after the investigations of the intraparticle redox potentials, local areas were identified with a dependence to “dispersing agent effects”. In addition the width of the emission decrease as a result of the oxidation or reduction process of the (6,5)-SWNT was analysed. This investigation led to the conclusion that the charge carriers quenching efficiency mainly contributes to the overall width. Beyond that the data indicated that a distribution of 0.32 quenching centers per nanometer is needed for the total quenching of the photoluminescence. In addition to the redox chemistry analysis of pristine (6.5)-SWNTs, the investigation of the dependency in presence of ferrocene molecules showed that the interaction of the herein forming complex is of non-covalent type. This conclusion was based on two facts: on the one hand, the ferrocene molecules desorbed from the CNT surface when the solvent in the microfluidic channel was exchanged with a pure dimethylformamide solution and on the other hand, no permanent decrease in emission intensity due to covalent bond forming was observed. The potential-dependent PL behavior allowed for the assumption of a charge transfer from the adsorbed ferrocene molecules into the optically generated holes in the CNT. Furthermore the experimental data allowed to assume that this charge transfer increases with higher photon flux. With regard to applications with carbon nanotubes for electrolysis and photolysis of water, the redox chemistry of (6,5)-SWNTs was investigated in this solvent. With re- spect to the emission intensity in the organic electrolyte, two effects could be identified which were firstly the overall decrease of the PL, and secondly an irreversible reaction during anodic polarization, which manifested itself by a permanent quenching of the photoluminescence. The reaction conditions were determined with the result that water, optical generated electron-hole pairs and potential induced holes in the valence band formed a [SWNT(Q)] species, which caused the irreversible reduction of the CNT emission. Moreover, the evaluated reaction rate followed pseudo-zero-order kinetics, provided that the just mentioned parameters were constant. The investigation of this [SWNT(Q)] species in a ferrocene solution showed that the quenching effect of these defects was reduced for anodic polarisation by assuming an oxidation of the [SWNT(Q)] species by the Fc+ cations. The CVD apparatus enabled to synthesize carbon nanotubes. Ethanol was used as the carbon source and a mixture of iron and cobalt mixed with a zeolite worked as catalyst. The analysis of the various process parameters showed that the best distribution ratio between the desired (6,5)-SWNTs and other CNT chiralities or amorphous carbon were obtained for T = 750 °C . It was assumed that this behavior is due to the fact that at T < 750 °C burning processes of unwanted amorphous carbon residues only slightly occurred, and that at T > 750 °C the growth mechanism favoured chiralties with larger diameter. By varying the flow rate, only an absolute increase of all chiralities was observed. In this context it should be noted that nevertheless the chirality distribution can be improved to higher yields of (6,5)-SWNTs, by an adaptation of the pressure and temperature during synthesis. The experiments which investigated the impact of reaction pressure changes, indicated a relation in accordance to Le Chatelier law. Therefore lower pressure moved the equilibrium towards product formation of the ethanol-cracking reaction, which increased the molecule concentration of ethane, ethylene and methane and the overall CNT yield. However, this caused also an increment of the absolute amorphous carbon concentration. According to that, it was found that a pressure of p = 9 mbar yielded the best (6.5)-SWNT to amorphous carbon ratio. The experiments performed in this thesis allowed to gain new insights about the sensitivity of the emission of (6,5)-SWNTs due to charging. Especially the deter- mination of the correlation between the photoluminescence and charging level of the CNTs will allow for a more selective use of carbon nanotubes – for example in sensors. In this context the analysis of the interparticle redoxpotential distribution showed precisely the effects of solvent and defect densities on the electronic structure of CNTs. Further the reasons for different values of the reduction and oxidation potential, which are found in literature were explained. For the future this information will allow a better selection of the spectroscopic method to determine the band edges of carbon nanotubes. The spectroelectrochemical analysis of the (6,5)-SWNTs in the solvent water and especially the determination of the kinetics for the observed irreversible reaction gave insight in the interaction between water molecules and carbon nanotubes. These results are particularly important, when carbon nanotubes are used as electrode material. For example in the electrochemical and photolytic generation of hydrogen and oxygen of water. Besides the covalent bond forming reaction of (6,5)-SWNTs in water under anodic potential and optical excitation, the non-covalent bonding reaction between ferrocene molecules and SWNTs was shown and analysed. The different impact of these two interaction on the electronic structure could then be demonstrated and explained. KW - Spektroelektrochemie KW - Kohlenstoff-Nanoröhre KW - Redoxpotential KW - Photolumineszenz KW - Einzelmolekülspektroskopie KW - (6,5)-SWNT KW - Spektroelektrochemie KW - Potentialinduzierte Löschung KW - CVD Synthese KW - Raman-Spektroskopie KW - electrochemistry KW - photoluminescence KW - single particle microscopy KW - Raman spectroscopy Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112162 ER - TY - THES A1 - Schmidt, Thomas Christian T1 - Theoretical Investigations on the Interactions of Small Compounds with their Molecular Environments T1 - Theoretische Untersuchungen der Wechselwirkungen Kleiner Moleküle mit deren Molekularen Umgebungen N2 - Im ersten Teil dieser Arbeit wird eine Kombination theoretischer Methoden für die strukturbasierte Entwicklung neuer Wirkstoffe präsentiert. Ausgehend von der Kristallstruktur eines kovalenten Komplexes einer Modellverbindung mit dem Zielprotein wurde mit Hilfe von quantenmechanischen und QM/MM Rechnungen die genaue Geometrie des vorausgehenden nicht-kovalenten Komplexes betimmt. Letztere ist der bestimmende Faktor für die Reaktivität des Inhibitors gegenüber der katalytisch aktiven Aminosäure und damit für die Ausbildung einer kovalenten Bindung. Aus diesem Grund wurde diese Geometrie auch für die Optimierung der Substitutionsmusters des Ihnibitors verwendet, um dessen Affinität zum Zielenzyme zu verbessern ohne dass dieser seine Fähigkeit kovalent an das aktive Zentrum zu binden verliert. Die Optimierung des Substitutionsmuster wurde doch Methode des Molekularen Dockings unterstützt, das diese optimal dazu geeignet sind, Bindungsaffinitäten vorherzusagen, die durch eine Modifikation der chemischen Struktur entstehen. Eine Auswahl der besten Strukturen wurde anschließend verwendet, um zu überprüfen, ob die veränderten Moleküle noch genügen Reaktivität gegenüber dem Zielprotein aufweisen. Moleküldynamik Simulationen der neuen Verbindungen haben jedoch gezeigt, dass die veränderten Verbindungen nur so and das Protein binden, dass die Bilung eine kovalenten Bindung zum Enzym nicht mehr möglich ist. Daher wurden in einem weiteren Schritt die Modellverbindungen weiter modifiziert. Neben Änderungen im Substitutionsmuster wurde auch die chemische Struktur im Kern verändert. Die Bindungsaffinitäten wurde wieder mittels Docking überprüft. Für die besten Bindungsposen wurden wieder Simulationen zur Moleküldynamik durchgeführt, wobei diesmal die Ausbildung einer kovalenten Bindung zum Enzyme möglich erscheint. In einer abschließenden Serie von QM/MM Rechnungen unter Berücksichtigung verschiedener Protonierungszustände des Inhibitors und des Proteins konnten Reaktionspfade und zugehörige Reaktionsenergien bestimmt werden. Die Ergebnisse lassen darauf schließen, dass eines der neu entwickelten Moleküle sowohl eine stark verbesserte Bindungsaffinität wie auch die Möglichkeit der kovalenten Bindung an Enzyme aufweist. Der zweite Teil der Arbeit konzentriert sich auf die Umgebungseinflüsse auf die Elektronenverteilung eines Inhibitormodells. Als Grundlage dient ein vinylsulfon-basiertes Moekül, für das eine experimentell bestimmte Kristallstruktur sowie ein theoretisch berechneter Protein Komplex verfügbar sind. Ein Referendatensatz für diese Systeme wurde erstellt, indem der Konformationsraum des Inhibitors nach möglichen Minimumsstrukturen abgesucht wurde, welche später mit den Geometrien des Moleküls im Kristall und im Protein verglichen werden konnten. The Geometrie in der Kristallumgebung konnte direkt aus den experimentellen Daten übernommen werden. Rechnungen zum nicht-kovalenten Protein Komplex hingegen haben gezeigt, dass für das Modellsystem mehrere Geometrien des Inhibiors sowie zwei Protonierungszustände für die katalytisch aktiven Aminosäuren möglich sind. Für die Analyse wurden daher alle möglichen Proteinkomplexe mit der Kristallstruktur verglichen. Ebenso wurden Vergleiche mit der Geometrie des isolierten Moleküls im Vakuum sowie der Geometrie in wässriger Lösung angestellt. Für die Geometrie des Moleküls an sich ergab sich eine gute Übereinstimmung für alle Modellsysteme, für die Wechselwirkungen mit der Umgebung jedoch nicht. Die Ausbildung von Dimeren in der Kristallumgebung hat einen stark stablisierenden Effekt und ist einer der Gründe, warum dieser Kristall so gut wie keine Fehlordungen aufweist. In den Proteinkomplexen hingegen ergibt sich eine Abstoßung zwischen dem Inhibitor und einer der katalytisch aktiven Aminosäuren. Als Ursache für diese Abstoßung konnte die Einführung der Methylaminfunktion ausgemacht werden. Vermutlicherweise führt diese strukturelle Änderung auch dazu, dass der Modellinhibitor nicht in der Lage ist, so wie die Leitstruktur K11777 an das aktive Zentrum des Enzyms zu binden. N2 - In the first part of this work, a combination of theoretical methods for the rational design of covalent inhibitor is presented. Starting from the crystal structure of the covalent complex of a lead compound, quantum mechanical and QM/MM calculations were used to derive the exact geometry of the preceeding non-covalent enzyme inhibitor complex. The geometry of the latter mainly determines the reactivity of the inhibitor against its target enzyme concerning the formation of the covalent bond towards an active site residue. Therefore, this geometry was used as starting point for the optimization of the substitution pattern of the inhibitor such as to increase its binding affinity without loosing its ability to covalently bind to the target protein. The optimization of the chemical structure was supported by using docking procedures, which are best suited to estimate binding affinities that arise from the introduced changes. A screening of the novel substitution patterns resulted in a first generation of model compounds which were further tested for their reactivity against the target. Dynamic simulations on the novel compounds revealed that the orientation that compounds adopt within the active site are such that a covalent interaction with the enzyme is no longer possible. Hence, the chemical structure was further modified, including not only changes in the substituents but also within the core of the molecule. Docking experiments have been conducted to assure sufficiently high binding affinities and to obtain the most favored binding poses. Those have then again been used for dynamic simulations which resulted in structures, for which the bond formation process appeared feasible. A final series of QM/MM calculations considering various protonation states was computed to estimate the reaction energies for the covalent attachment of the inhibitor to the enzyme. The theoretical results indicate a reasonable high inhibition potency of the novel compounds. The second part concentrates on the environmental influences on the electron density of an inhibitor molecule. Therefore, a vinylsulfone-based model compound was selected for which an experimental crystal structure for the pure compound as well as a theoretically determined enzyme-inhibitor complex have been available. To provide reference data for the larger systems, the conformational space of the isolated molecule was screened for favorable geometries which were later compared to those within the crystal and protein surrounding. The geometry of the crystal structure could readily be taken from the experimental data whereas calculations on the protein complex revealed four potential non-covalent complexes exhibiting different arrangements of the molecule within the active site of the protein as well as two possible protonation states of the catalytic dyad. Hence, all four protein complexes have been compared to the crystal structure of the molecule as well as against the more favorable geometries of the isolated molecule being determined within vacuum or aqueous surrounding. Whereas the molecule itself was found to adopt comparable geometries within all investigated environments, the interactions pattern between the crystal surrounding and the protein differed largely from each other. The favorable formation of dimers within the crystal has a strong stabilizing effect and explains the extraordinarily good quality of the crystal. Within the protein however, repulsive forces have been found between the protein and the inhibitor. The origin of the repulsion could be traced back to effect of on of the substituents to the vinyl scaffold. The difference in the chemical structure in comparison to a well known inhibitor might also explain the experimentally found loss of activity for the model compound in comparison to K11777. KW - Theoretische Chemie KW - theoretical chemistry KW - electron density KW - inhibition KW - Elektronendichte KW - Inhibitor Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-127860 ER - TY - THES A1 - Holzmeier, Fabian T1 - Photoionization of Nitrogen-Containing Reactive Molecules with Synchrotron Radiation T1 - Photoionisation von stickstoffhaltigen reaktiven Molekülen mit Synchrotronstrahlung N2 - The photoionization of several nitrogen-containing reactive intermediates relevant in combustion processes was investigated in the gas phase employing VUV synchrotron radiation. The intermediates were either freshly prepared and stored under cryogenic temperatures during the experiment or generated in situ by vacuum flash pyrolysis of suitable precursor molecules. The iPEPICO (imaging photoelectron photoion coincidence) setups of the VUV beamlines at the Swiss Light Source and Synchrotron SOLEIL were then used to record mass-selected threshold photoelectron (TPE) spectra. TPE spectra reveal the ionization energy and vibrational structure in the cationic states can often be resolved, which enables to distinguish different isomers. Accurate ionization energies for the radicals carbonyl amidogen, pyrrolyl, and 3-picolyl, and for the closed shell molecules isocyanic acid and cyanovinylacetylene were obtained. The analysis of the dissociative photoionization of the pyrolysis precursors enables in some cases to retrieve thermochemical data. Beyond, the absolute photoionization cross section of the cyclic carbene cyclopropenylidene was determined, NEXAFS and normal Auger spectra of isocyanic acid were recorded and analyzed at the O1s, N1s, and C1s edges, and the dissociative photoionization and pyrolysis of 1,4-di-tert-butyl-1,4-azaborinine was studied. N2 - Die Photoionisiation von stickstoffhaltigen reaktiven Intermediaten, die in Verbrennungsprozessen vorkommen, wurde in der Gasphase mit VUV Synchrotronstrahlung untersucht. Die Intermediate wurden entweder unmittelbar vor dem Experiment hergestellt und während des Experiments bei sehr niedrigen Temperaturen gehalten oder in situ durch Vakuum Flash Pyrolyse eines geeigneten Vorläufermoleküls erzeugt. Massenselektive Schwellenphotoelektronen(TPE)-Spektren wurden an den iPEPICO (imaging photoion photoelectron coincidence) Setups der VUV Strahllinien der Swiss Light Source und des Synchrotrons SOLEIL aufgenommen. Die Ionisierungsenergie kann in TPE-Spektren bestimmt werden und eine Auflösung von Schwingungsstruktur im Kation ist in vielen Fällen möglich, wodurch verschiedene Isomere unterschieden werden können. Verlässliche Ionisierungsenergien konnten für die Radikale Carbonylamidogen, Pyrrolyl und 3-Picolyl sowie für die geschlossenschaligen Moleküle Isocyansäure und Cyanovinylacetylen erhalten werden. Die Analyse der dissoziativen Photoionisation der Pyrolysevorläufer eröffnet in manchen Fällen Zugang zu thermochemischen Daten. Darüber hinaus wurde der absolute Photoionisationsquerschnitt des cyclischen Carbens Cyclopropenyliden bestimmt, wurden die NEXAFS und nicht-resonanten Auger Spektren von Isocyansäure an der O1s, N1s und C1s Kante aufgenommen und analysiert und die dissoziative Photoionisation und Pyrolyse von 1,4-di-tert-butyl-1,4-azaborinin untersucht. KW - Dissoziative Photoionisation KW - Synchrotronstrahlung KW - Ultraviolett-Photoelektronenspektroskopie KW - Pyrolyse KW - Photoelektron-Photoion-Koinzidenz KW - Fotoionisation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-127763 ER - TY - JOUR A1 - Brüning, Christoph A1 - Wehner, Johannes A1 - Hausner, Julian A1 - Wenzel, Michael A1 - Engel, Volker T1 - Exciton dynamics in perturbed vibronic molecular aggregates JF - Structural Dynamics N2 - A site specific perturbation of a photo-excited molecular aggregate can lead to a localization of excitonic energy. We investigate this localization dynamics for laser-prepared excited states. Changing the parameters of the electric field significantly influences the exciton localization which offers the possibility for a selective control of this process. This is demonstrated for aggregates possessing a single vibrational degree of freedom per monomer unit. It is shown that the effects identified for the molecular dimer can be generalized to larger aggregates with a high density of vibronic states. KW - absorption spectra KW - excited states KW - polymers KW - excitons KW - wave functions Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-126085 VL - 3 ER - TY - THES A1 - Späth, Florian Leonhard T1 - Präparation und Charakterisierung einwandiger Kohlenstoffnanorohr-Polyfluoren-Komplexe T1 - Preparation and characterization of single-wall carbon nanotube-polyfluorene-complexes N2 - Im Fokus dieser Arbeit standen (6,5)-SWNT-PFO-BPy-Komplexe als Vertreter für polyfluorenstabilisierte, einwandige Kohlenstoffnanoröhren. In einem ersten Projekt wurden präparative Verfahren zur Dispergierung und Abscheidung dieser Proben weiterentwickelt. Es ist gelungen, die Ansatzgröße von 15 mL auf 200 mL hochzuskalieren sowie dünne SWNT-Filme über Rotationsbeschichtung herzustellen. Des Weiteren wurde die lichtinduzierte Dynamik in halbleitenden SWNTs von der ps- bis zur µs-Zeitskala untersucht. Hier wurde ein umfassendes Bild zur Singulett- und Triplett-Exzitonendynamik in halbleitenden Kohlenstoffnanoröhren gezeichnet, welches maßgeblich durch diffusionslimitierte Prozesse geprägt ist. Abschließend wurde eine Methode vorgestellt, mit der sich Informationen zur Struktur von SWNT-Polymer-Komplexen und anderen supramolekularen Systemen gewinnen lassen. Diese basiert auf der Kombination von polarisationswinkelaufgelöster Absorptionsspektroskopie an anisotropen Proben und globaler Datenanalyse. N2 - This work’s focus was set on (6,5)-SWNT-PFO-BPy complexes as representatives for polyfluorene-stabilized single-wall carbon nanotubes. As a first project, preparative methods for dispersion and deposition of these samples were refined. The batch size was successfully scaled up from 15 mL to 200 mL and thin SWNT-films were prepared by spin coating. Furthermore, light-induced dynamics from the ps to the µs time scale were investigated in semiconducting SWNTs. Here, a comprehensive picture of the singlet and triplet exciton dynamics in semiconducting SWNTs was provided, which is significantly affected by diffusion-limited processes. Finally, a method providing information about the structure of SWNT-polymer complexes and other supramolecular system was introduced. It is based on a combination of polarization angle-resolved absorption spectroscopy of anisotropic samples and global data analysis. KW - Kohlenstoff-Nanoröhre KW - Dispergierung KW - Fotophysik KW - Polyfluorene KW - Diffusion KW - Nanorohr-Polymer-Komplexe KW - nanotube-polymer-complexes Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123874 ER - TY - THES A1 - Bergler, Felix T1 - Photolumineszenzbasierte Untersuchung der Struktur und der thermodynamischen Bildungsparameter mizellar stabilisierter (6,5)-Kohlenstoffnanoröhren T1 - Photoluminescence based study on structure and thermodynamic properties of micellarly stabilized (6,5) carbon nanotubes N2 - In dieser Arbeit werden die Wechselwirkungen zwischen der Oberfläche von Kohlenstoffnanoröhren und verschiedenen Dispergierreagenzien anhand der Photolumineszenz (PL) der (6,5)-Nanoröhren untersucht. Um den Einfluss der verschiedenen Reagenzien auf die exzitonischen Eigenschaften und die PL-Emission zu quantifizieren, wurden die Dispergierreagenzien ausgetauscht, die Temperaturabhängigkeit bestimmt und die Konzentration der Reagenzien variiert. Die Dispergierreagenzien eines immobilisierten, SC-stabilisierten (6,5)-SWNT-Ensembles wurden im Mikrofluidikkanal ausgetauscht. Wird der Kanal mit Wasser gespült, verringern sich die PL-Intensität und die Emissionsenergie, da der Wasserfluss die Tensidmoleküle von der Oberfläche entfernt. Beim Austausch einer DOC-Umgebung gegen Wasser nimmt die PL-Intensität ebenfalls ab und die PL-Emissionsenergie verringert sich. Die Austauschexperimente verlaufen reversibel und der instantane Anstieg der Emissionsenergie bei der Tensidadsorption weist auf eine kooperative Anlagerung hin. Deshalb ist anzunehmen, dass sich Tensid-SWNT-Heteromizellen ausbilden. Anschließend werden die Emissionsenergie und die PL-Intensität in verschiedenen Dispergierreagenzien und in Wasser verglichen. Die größte Emissionsenergie und PL-Intensität werden während des Wechsels von einer SDS- zu einer (GT)16-Lösung gemessen. Dies kann auf die lückenlose Bedeckung der SWNT-Oberfläche mit einer heterogenen Schicht aus SDS-Molekülen und (GT)16-Strängen zurückgeführt werden. In reiner SDS-Umgebung emittieren die Nanoröhren Licht mit der zweithöchsten Energie, aber die PL-Intensität liegt unter der in einer SC-Umgebung. Die Emissionsenergie in der SC-Umgebung ist geringer und davon abhängig, ob die SWNTs bereits mit (GT)16-Strängen stabilisiert waren, da dies eine permanente Rotverschiebung der Emissionsenergie in der SC-Umgebung sowie eine verringerte PL-Intensität verursacht. In wässriger Umgebung verringert sich nach erfolgtem (GT)16-Kontakt die PL-Intensität dauerhaft. Danach wurde die Anlagerung von Tensidmolekülen an die (6,5)-SWNT-Oberfläche in Suspensionen mit der Temperatursprungmethode untersucht. Die Temperatur im Mikrofluidikkanal wurde anhand der linearen Abnahme der Emissionsenergie SC- und DOC-stabilisierter SWNTs mit steigender Temperatur bestimmt. Die Suspensionstemperatur ist in den verschiedenen Temperatursprungexperimenten unabhängig von der Messposition im Mikrofluidikkanal und wird durch die absolute Position auf den Peltier-Elementen bestimmt. Zudem stimmen die im Kanal gemessenen Temperaturen für SC- und DOC-stabilisierte (6,5)-SWNTs überein, weshalb in diesem Experiment nicht die erwartete Einstellung eines Gleichgewichts wie in einem Temperatursprungexperiment der Fall, sondern die Momentantemperatur gemessen wird. Die schnelle Gleichgewichtseinstellung zwischen freien und auf der SWNT-Oberfläche adsorbierten Tensidmolekülen beim Temperatursprung zeigt, dass die SC- und DOC-(6,5)-SWNT-Suspensionen thermochrome Farbstoffe sind. Wegen der Temperaturabhängigkeit der Emissionsenergie ist es bei wissenschaftlichen Arbeiten wichtig, neben dem verwendeten Dispergierreagenz auch die Temperatur der SWNT-Suspension anzugeben. Abschließend wurden die kritischen Mizellenkonzentrationen von Tensid-SWNT-Suspensionen in Verdünnungsexperimenten und daraus die thermodynamischen Bildungsparameter der Tensid-SWNT-Heteromizellen ermittelt. In der temperaturabhängigen Analyse der SC-SWNT-Mizellenbildung wird ein konstanter Hill-Koeffizient erhalten, der die Mizellenbildung als positiv kooperativ klassifiziert. Für die Bestimmung der Freien Mizellierungsenthalpie wurden nur die CMCs aus den Verdünnungsexperimenten verwendet, da die Mizellenbildung bei der Aufkonzentration teils kinetisch gehemmt ist. Da die Freie Mizellierungsenthalpie bei allen Temperaturen negativ ist, stabilisiert die Bildung der Heteromizellen das System. Die Triebkraft für die Mizellenbildung ist über 322 K die Enthalpie, während unterhalb von 316 K der Entropiegewinn dominiert. Die Verdünnung einer DOC-SWNT-Suspension zeigt keine Änderung der Emissionsenergie, obwohl dabei sowohl die primäre als auch die sekundäre CMC von DOC unterschritten werden. Zuletzt wurden die Verdünnungsexperimente mit einer SDS-SWNT-Suspension durchgeführt und die thermodynamischen Parameter der Mizellenbildung bestimmt. Da auf die Auflösung der Mizellenstruktur direkt die Aggregation der SWNTs folgt, wurde für die Ermittlung der CMC näherungsweise die Konzentration am Maximum der Emissionsenergie verwendet. Daraus ergibt sich bei jeder Temperatur eine negative Freie Mizellierungsenthalpie, deren Beiträge analog zu SC bei kleineren Temperaturen als 323 K entropisch und bei höheren Temperaturen enthalpisch dominiert werden. Somit ermöglichen die Experimente mit SC- und SDS-SWNT-Suspensionen die temperaturabhängige Bestimmung der CMC und damit die Berechnung der Freien Mizellierungsenthalpie sowie der zugehörigen enthalpischen und entropischen Beiträge. N2 - The goal of this thesis is to study the interplay between the SWNT surface and various dispersion agents. The influence of different surfactants on photoluminescence (PL) intensity and emission energy of (6,5)-SWNTs was quantified experimentally. The experiments are separated into three categories: surfactant exchange, determination of the temperature dependency of the PL, and the variaton of surfactant concentration. The dispersion agents of immobilized (6,5)-SWNT ensembles, that are placed in a microfluidic channel, are exchanged. Purging water through the microfluidic channel diminishes the PL intensity and red shifts PL emission energy, as the surfactants either SC or DOC are removed from the SWNT surface. The decrease of the PL intensity and emission energy are also observed if solution is exchanged for water. The surfactant exchange is reversible and the surfactant adsorption shows cooperativity features, which provide evidence for the formation of a surfactant SWNT hetero micelle. Afterwards the PL intensity and PL emission energy of the SWNTs are compared in different dispersing agents and water. The peak values for PL emission energy and PL intensity are measured when exchanging the SDS surfactant for (GT)16 ssDNA. They are caused by a complete coverage of the SWNT surface with a hetero-layer consisting of both species. The second highest PL emission energy is emitted in pure SDS environment followed by SC environment. Regarding the PL intensity the opposite effect is observed. A SC shell yields higher PL intensities than the SDS shell. If the SWNTs had previously been in contact with the (GT)16 ssDNA, the PL intensity was permanently reduced in the SC environment and was accompanied by a permanent red shift of the PL emission energy. The decreased PL intensity renders the water environment indistinguishable from the (GT)16 ssDNA covered SWNTs because they now show the same emission energy and equally low intensities. Subsequently the attachment of surfactant molecules to the surface of colloidally stabilized SWNTs is analyzed by using a temperature jump method. The temperature in the microfluidic channel was measured using the linear relationship between the temperature increase and the decrease of the PL emission energy of SC- and DOC-SWNT solutions. The solution temperature in the temperature jump experiments is independent of the channel position but determined by the absolute position on the Peltier element. In addition, the use of DOC instead of SC as surfactant showed no difference in temperature development, which leads to the conclusion that instead of the equilibration process, the actual liquid temperature is measured since the former is too fast for this experimental approach. The instantaneous equilibration of free and adsorbed surfactant molecules allows to deduce the solution temperature. Thus, SC- and DOC-SWNT solutions can be used as thermochromic dyes. More importantly, the correlation of PL intensity and PL emission energy with temperature emphasizes the importance of providing solution temperatures alongside the dispersing agents and their respective concentrations in scientific studies. Critical micelle concentrations (CMC) of surfactant SWNT solutions are determined in dilution experiments. Afterwards, thermodynamic parameters of the SWNT surfactant heteromicelle formation process are calculated. Hill analysis was used to identify the CMC at the inflection point of the sigmoidal PL emission energy decrease and to determine the Hill coefficient, classifying the micelle formation to be cooperative. Only the CMCs of the dilution experiments were used to calculate the micellar Gibbs energies since the micelle formation in the titration experiments is kinetically hindered at lower temperatures. Since the micellar Gibbs energy is negative at all temperatures, the micelle formation stabilizes the system. At temperatures above 322 K the micellar Gibbs Energy is dominated by the enthalpic contribution while the micelle formation is driven entropically below 316 K. The same experiment was conducted using DOC as dispersion agent, but showed no difference in the PL emission energy passing both the primary and the secondary CMCs of a pure DOC solution. Further experiments feature the dilution of SDS-SWNT solutions and the calculation of the thermodynamic parameters. As the breakup of the micellar structure is directly followed by SWNT aggregation, the CMC is approximately defined as concentration at the PL emission energy maximum. As the micellar Gibbs energy is always negative, the micelle formation provides a stabilization of the SDS-SWNT System, which is driven entropically below 323 K and dominated by enthalpy at higher temperatures. In conclusion, dilution experiments allow for the temperature dependent determination of CMCs and calculation of micellar Gibbs Energy with corresponding entropic and enthalpic contributions. KW - Kohlenstoff-Nanoröhre KW - Tensid KW - Kooperativität KW - Photolumineszenzspektroskopie KW - Strukturaufklärung KW - Mizelle KW - micelle KW - Mikrofluidikchip KW - microfluidic chip KW - Temperaturabhängigkeit KW - temperature dependence KW - SWNT-Ensemble KW - SWNT-ensemble KW - Freie Enthalpie KW - Gibbs Energy Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123586 ER - TY - THES A1 - Seibt, Joachim T1 - Theoretical investigations on the spectroscopy of molecular aggregates T1 - Theoretische Untersuchungen zur Spektroskopie von Molekülaggregaten N2 - Die spektroskopischen Eigenschaften von Molekülaggregaten wurden mittels quantendynamischer Berechnungen untersucht. Hierbei wurden sowohl lineare als auch nichtlineare Spektroskopietechniken einbezogen. Zur Simulation von Absorptions- und CD-Spektroskopie wurden Kopplungseffekte sowie die relative Orientierung der Monomer-Einheiten in den Modellen berücksichtigt, um gemessene Spektren reproduzieren und so die entsprechenden Parameter zu bestimmen. Zur genaueren Beschreibung wurden auch Ergebnisse quantenchemischer Rechnungen verwendet. Darüber hinaus wurden Untersuchungen zur nichtlinearen optischen Spektroskopie an Dimeren durchgeführt. N2 - The spectroscopic properties of molecular aggregates have been investigated by means of quantum dynamical calculations. Thereby both linear and nonlinear spectroscopic techniques have been taken into account. For the simulation of absorption and CD-spectra, coupling effects were regarded as well as the relative orientation of the monomer units in order to determine the parameters by reproducing measured spectra. For a more detailled description, results from quantum chemical calculations have also been included. Furthermore, investigations on nonlinear spectroscopy of molecular dimers have been performed. KW - Theoretische Chemie KW - Aggregat KW - Nichtlineare Spektroskopie KW - CD-Spektroskopie KW - Quantenchemie KW - Quantendynamik KW - quantum dynamics Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-37218 ER - TY - THES A1 - Tebbe, David T1 - Funktionalisierung von Titan(dioxid)oberflächen mit kovalent gebundenem und in Depots eingebrachtem Wirkstoff für den Blutkontakt T1 - Functionalization of titanium surfaces with covalently attached and embedded drug for blood contact N2 - Ziel der vorliegenden Arbeit war die Funktionalisierung von Titanoberflächen mit dem Glycosaminoglycan Heparin, um bei Kontakt des Werkstoffs mit Blut die Gerinnungskaskade nicht auszulösen und das Material für Stents (Gefäßstützen) im arteriellen System einsetzbar zu machen. Für die Modifizierungen wurden als Modell der oxidierten Titanoberfläche sowohl oxidierte cp-Titanplättchen als auch TiO2-Pulver verwendet. Heparin kam zum Einsatz, da es sowohl die Hämostase (Blutgerinnung) als auch die Proliferation (Überwucherung) mit glatten Muskelzellen unterdrückt und somit eine Restenose (Wiederverengung) des in die verengte Arterie eingebrachten Stents verhindert. Die kovalente Immobilisierung des Wirkstoffs erfolgte über bifunktionale Spacer (Haftvermittlermoleküle). Spacer waren 3-(Trimethoxysilyl)-propylamin (APMS), N-(2-Aminoethyl)-3-aminopropyltrimethoxysilan (Diamino-APMS) und N1-[3-(Trimethoxysilyl)-propyl]diethylen¬triamin (Triamino-APMS). Der qualitative und quantitative Nachweis der Funktionalisierung von TiO2 mit Haftvermittler bzw. Heparin erfolgte durch schwingungsspektroskopische Methoden, komplexometrische Farbreaktionen sowie der Bestimmung des Zetapotentials im Elektrolytkontakt. Durch die Anbindung von APMS, Di- und Triamino-APMS stieg das Zetapotential von ca. -26 mV auf positive Werte zwischen +41 und +45 mV. Ein Absinken des Zetapotentials belegte die erfolgreiche Anbindung von Heparin (Werte zwischen -39 und -37 mV) an die verschiedenen Haftvermittler, ebenso wie das Vorhandensein der symmetrischen SO3-Valenzschwingung bei 1040 cm-1. Der quantitative Nachweis der immobilisierten Aminogruppen über die Ninhydrinreaktion ergab für die TiO2-Pulver Werte zwischen 17-20 NH2/nm2, wobei die dichteste Funktionalisierung mit APMS und die niedrigste mit Triamino-APMS erzielt werden konnte. Alle Werte lagen im Bereich von Multilayern, da ein Monolayer aus ca. 2 3 NH2/nm2 besteht. Die immobilisierte Menge an Heparin war bei Verwendung von APMS am größten (53.3±3.6 ng/cm2) und bei Triamino-APMS am geringsten (32.1±5.7 ng/cm2). Die biologische Wirksamkeit des gebundenen Heparins wurde über das chromogene Substrat ChromozymTH® bestimmt und verblieb bei Anbindung an den Spacer mit der größten Moleküllänge (Triamino-APMS) mit ca. 70% am wirksamsten. Neben der kovalenten Anbindung des Wirkstoffs an Spacer zielte diese Arbeit auf die Entwicklung von organisch modifizierten, porösen SiO2-Wirkstoffdepots (P-MA-PS; Poly-methacryl¬oxy¬propylpolysilsesquioxane) für Heparin ab, die sowohl als Volumenwerkstoffe als auch zur Modifikation von Titan(dioxid)oberflächen anwendbar wären. Die Matrices wurden ausgehend von MAS (Methacryl¬oxypropyl¬trimethoxysilan) über den Sol-Gel Prozeß anorganisch und anschließend über photochemische Polymerisation zusätzlich organisch vernetzt. Die Quantifizierung des Polymerisationsgrads erfolgte über die Signalintensität der methacrylischen C=C-Doppelbindung bei 1635 cm-1 durch Integration einer Gauß-Funktion. Über den Polymerisationsgrad der organischen Matrix zwischen 0-71% konnte die Freisetzungskinetik von Heparin je nach therapeutischer Anforderung eingestellt werden. Es konnte gezeigt werden, daß hohe Wirkstoff-Beladungen und niedrige Polymerisationsgrade mit einer schnelleren Freisetzung des Heparins korrelierten, die aufgrund der Endlichkeit des Wirkstoffs im Depot einer Kinetik 1. Ordnung unterlag. Die kumulativ freigesetzten Wirkstoffmengen verhielten sich hierbei proportional zur Wurzel aus der Freisetzungszeit, was dem Higuchi-Modell zur Wirkstofffreisetzung aus porösen Matrices mit einem rein Diffusions-kontrollierten Mechanismus entsprach. Die durch Hydrolyse bedingte Degradation der anorganischen Matrix, die UV-VIS-spektroskopisch bei λ = 220 nm gemessen wurde, folgte einer Kinetik pseudo-0. Ordnung. Da das freigesetzte Heparin seine biologische Wirksamkeit beibehielt, sind P-MA-PS Matrices interessant für klinische Anwendungen, wie z.B. für die Beschichtung von Gefäßstützen, die im Blutkontakt stehen. N2 - Aim of this work was the functionalization of titanium surfaces with the glycosaminoglycane heparin to improve the surface hemocompatibility for an application in the field of coronary stenting. Surface modification was performed using both TiO2 powder and titanium sheets as substrates imitating the (oxidized) surface of titanium implants. The substrates were modified with heparin to prevent side effects like blood coagulation and neointimal proliferation after implantation, which can both lead to restenosis of the acute artery closure. Surfaces can be modified either by covalent bonding of the drug to the metal by a silane spacer or by embedding the active agent into a polymer matrix for the controlled release over a certain period of time. Covalent attachment of heparin to titanium metal and TiO2 powder was carried out using the coupling agents 3-(Trimethoxysilyl)-propylamine (APMS), N-[3-(Trimethoxysilyl)-propyl]-ethylenediamine (Diamino-APMS) and N1-[3-(Trimethoxysilyl)-propyl]-diethylenetriamine (Triamino-APMS). Additionally, the influence of primary accomplished TiO2 films on the density of surface bound spacer was determined. Therefore, polished titanium substrates were covered with thin (< 2 µm) TiO2 layers by means of thermal/anodic oxidation, physical vapor deposition (PVD) or the sol-gel process and were then modified with the different spacer molecules, respectively. Aim was a correlation between the composition/topography of the TiO2 layers and the amount of bound spacer molecules. At this, two tendencies could be observed. Firstly, the density of surface bound spacer was generally highest for APMS (115-212 nmol/cm2) and lowest for Triamino-APMS (102-176 nmol/cm2), which was due to that smaller molecules underlie less intermolecular sterical hindrance onto surfaces. And secondly, on TiO2 surfaces with a higher roughness and therewith a higher specific surface area more spacer molecules could be immobilized (in the sequence: PVD > heat treated > anodized > sol-gel). The amount of surface bound coupling agent and heparin was quantified photometrically by the ninhydrin reaction and the toluidine-blue test. The biological potency of heparin was determined photometrically by the chromogenic substrate Chromozym TH and fibrinogen adsorption on the modified surfaces was investigated using the QCM-D (Quartz Crystal Microbalance with Dissipation Monitoring) technique. Zeta-potential measurements confirmed the successful coupling reaction; the zeta-potential of the unmodified anatase surface (approx. -26 mV) shifted into the positive range (> +40 mV) after silanisation. Binding of heparin resulted in a strongly negatively charged surface with zeta-potentials of approx. 39 mV. The successful heparinization could also be followed using RAMAN-spectroscopy by the occurrence of the peak at 1040 cm-1 (S=O vibration) caused by the drug. The amount of covalently attached primary amino groups on TiO2 powder was the highest for APMS (20 NH2/nm2) and decreased for Di- and Triamino-APMS (19 & 17 NH2/nm2). The hereby accomplished aminosilane layers were all in the range of multilayers since a monolayer is approx. 2 3 NH2/nm2. On the APMS spacer, the greatest amount of 53.3±3.6 ng/cm2 heparin was immobilized compared to Di- and Triamino-APMS (41.2±6.9 & 32.1±5.7 ng/cm2). The retaining biological activity of heparin was found to be the highest (70%) for the covalent attachment with Triamino-APMS as coupling agent due to the long chain of this spacer molecule and therefore the highest mobility of the drug. Moreover, this work aimed to investigate the use of an organically modified porous silica matrix (Poly(methacryloxypropyl)-poly(silsesquioxane); P-MA-PS) as a release system for heparin. The matrices were obtained from the precursor methacryloxypropyltrimethoxysilane (MAS) via the sol-gel process under acidic conditions following photochemical polymerization and cross-linking of the organic matrix. Modulation of the polymerization degree of the organic matrix in the range 0-71% allowed to adjust the release kinetics of heparin according to therapeutic needs. It was demonstrated that higher drug loads and a decreasing polymerization degree resulted in a faster release profile of heparin, which followed a square root of time kinetic according to the Higuchi model. The hydrolytic degradation of the xerogel was found to follow a zero-order kinetic whereas the heparin concentration did not show an influence on the degradation rate of the anorganic matrix. Since the released heparin retained its biological activity, P-MA-PS matrices may be interesting for clinical application, for instance as coating on drug eluting coronary stents. KW - Heparin KW - Titan KW - Oberfläche KW - Blutkontakt KW - Stent KW - Heparin KW - Titan KW - Oberfläche KW - Blutkontakt KW - Stent KW - heparin KW - titanium KW - surface KW - blood-contact KW - stent Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26579 ER - TY - THES A1 - Dümmler, Stefan Oliver T1 - Pikosekunden-zeitaufgelöste Spektroskopie gemischtvalenter Verbindungen T1 - Picosecond timeresolved Spectroscopy of Mixed Valence Compounds N2 - Ein System zur Aufnahme pikosekunden-zeitaufgelöster transienter Spektren wurde zu Beginn dieser Arbeit aufgebaut und charakterisiert. Zu diesem Zweck wurden Messungen von beta-Carotin durchgeführt und die Ergebnisse der Experimente mit den in der Literatur vorhandenen verglichen. Außerdem wurde der stark fluoreszierende Laserfarbstoff Rhodamin 6G vermessen, um abschätzen zu können, inwieweit Banden spontaner und stimulierter Emission Einfluss auf die transienten Absorptionsspektren besitzen. Es folgte die spektroskopische Untersuchung zweier Serien gemischtvalenter Verbindungen. Eine Serie besaß eine D-pi-A-, bzw. D-A-, die andere eine D-pi-D-, bzw. D-A-D-Grundstruktur. D und A stehen dabei für ein Elektronendonor-, bzw. Elektronenakzeptorsystem. Die Art der pi-Brücken und der Elektronendonoren wurde dabei variiert und die Verbindungen in verschieden polaren Lösungsmitteln vermessen. Im Mittelpunkt der Untersuchung beider Serien stand dabei die Geschwindigkeit des Elektronenrücktransfers nach einer durch einen Anrege-Puls induzierten Ladungstrennung in verschieden polaren Lösungsmitteln. Diese wurde zum einen beeinflusst durch die Art der pi-Brücke, zum anderen durch die unterschiedlichen Redoxpotentiale der Donorsubstituenten sowie durch das verwendete Lösungsmittel. Der Elektronenrücktransfer erfolgte bei allen der untersuchten Verbindungen und in jedem Lösungsmittel in der Marcus-invertierten Region. Die Transferrate war jedoch in polaren Lösungsmitteln deutlich größer als in apolaren. Außerdem wurden die Resonanz-Raman-Spektren einer der gemischtvalenten Verbindung aufgenommen, um mit dem Ladungstransfer einhergehende Molekülschwingungen identifizieren zu können. Eine Vorhersage der experimentellen ermittelten Elektronentransferraten nach den Methoden von Fermi und Jortner stieß an ihre Grenzen. Es bleibt zu klären, ob dies an einer ungenauen Beschreibung des Elektronentransfers durch die Formeln oder an einer noch zu ungenauen Bestimmung der in die Gleichungen eingehenden, auf unterschiedliche Methoden ermittelten Molekülparameter zurückzuführen ist. In einem weiteren Teil der Arbeit wurden zwei Vertreter der Medikamentenklasse der Fluorochinolone untersucht. Die Experimente mit Ciprofloxacin ergaben unerwartete Ergebnisse, die auf eine photochemische Reaktion schließen lassen, die in der Literatur weder vorgeschlagen noch veröffentlicht wurde. Die Untersuchung von Sparfloxacin ergab keine Ergebnisse, da die erhaltenen transienten Spektren keine Banden aufwiesen. N2 - In the first part of this work a system for transient absorption spectroscopy in the picosecond time regime was set up and characterized. Spectra of beta-Carotin available in the literature were reproduced to check the functionality of the system. To examine the influence of fluorescence bands on the transient spectra, the strongly fluorescing laser dye Rhodamine 6G was measured. Two series of mixed valence compounds were investigated. One series had a D-pi-A- or D-A-structure, D and A standing for an electron donor and electron acceptor system, respectively. The other series had a D-pi-A or D-pi-D-structure. The type of electron donor system and of the pi-bridge was varied as well as the solvent. The major aim of the investigation was to determine the rate of electron back transfer after a charge separation induced by the pump pulse in solvents of different polarity. This rate is influenced by the nature of the pi-bridge and the redox potentials of the different donors as well as the solvent. The electron back transfer reactions of all investigated compounds occured in the Marcus-inverted region; the rates of the electron transfer were much faster in polar solvents. The prediction of the electron back transfer rates according to the models applied by Fermi and Jortner was not satisfying. It is yet to clarify whether the inaccurate theoretical results stem from the use of inappropriate models or of improper molecular parameters within these models. In a further part of this work, two representatives of the drug class of fluoroquinolones were spectroscopically investigated. The experiments with Ciprofloxacin gave unexpected results indicating a photochemical reaction neither proposed nor published in the literature, yet. The investigation of Sparfloxacin did not give any results because the obtained spectra of the compound did not show any transient absorption bands. KW - Transiente Spektroskopie KW - gemischvalente Verbindungen KW - Fluorochinolon KW - Marcus-Theorie KW - Elektronentransferdynamik KW - transient spectroscopy KW - mixed valence compound KW - electron transfer dynamics KW - Marcus Theory Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24684 ER - TY - THES A1 - Marquetand, Philipp T1 - Vectorial properties and laser control of molecular dynamics T1 - Vektorielle Eigenschaften und Laser-Kontrolle molekularer Dynamik N2 - In this work, the laser control of molecules was investigated theoretically. In doing so, emphasis was layed on entering vectorial properties and in particular the orientation in the laboratory frame. Therefore, the rotational degree of freedom had to be included in the quantum mechanical description. The coupled vibrational and rotational dynamics was examined, which is usually not done in coherent control theory. Local control theory was applied, where the field is determined from the dynamics of a system, which reacts with an instantaneous response to the perturbation and, in turn, determines the field again. Thus, the field is entangled with the quantum mechanical motion and the presented examples document, that this leads to an intuitive interpretation of the fields in terms of the underlying molecular dynamics. The limiting case of a classical treatment was shown to give similar results and hence, eases to understand the complicated structure of the control fields. In a different approach, the phase- and amplitude shaping of laser fields was systematically studied in the context of controlling population transfer in molecules. N2 - Das Ziel dieser Arbeit war die theoretische Analyse der Laserkontrolle von Molekülen. Ein Schwerpunkt lag dabei auf vektoriellen Eigenschaften und im Besonderen auf der Orientierung eines Moleküls im Laboratorium. Hierfür wurde der Rotationsfreiheitsgrad in die quantenmechanische Beschreibung einbezogen. Die Kopplung zwischen Vibrations- und Rotationsdynamik wurde explizit berücksichtigt, während dieser Vorgang normalerweise bei theoretischen Untersuchungen zur kohärenten Kontrolle vernachlässigt wird. Als Kontrollschema wurde die lokale Kontrolltheorie (LCT) verwendet, in der das Feld aus der Dynamik eines Systems bestimmt wird, welche sofort auf diese äußere Störung antwortet und damit wiederum das Feld bestimmt. Somit ist das Feld mit der quantenmechanischen Bewegung verknüpft. Die vorgestellten Beispiele dokumentieren, dass dies zu einer intuitiven Interpretation der Felder bzgl. der zu Grunde liegenden molekularen Dynamik führt. In der vereinfachten, klassischen Darstellung der Probleme findet man vergleichbare Resultate. Die klassische Sichtweise ermöglicht ein anschauliches Verständnis der komplizierten Strukturen der Kontrollfelder. Zusätzlich wurde mit einem anderen Ansatz die Phasen- und Amplitudenformung von Laserfeldern systematisch untersucht, wobei der Populationstransfer in Molekülen kontrolliert werden sollte. KW - Laserchemie KW - Molekularbewegung KW - Vektor KW - Orientierung KW - Orientiertes Molekül KW - Photochemie KW - Zweiatomiges Molekül KW - Nichtstarres Molekül KW - Molekülzu KW - Kohärente Kontrolle KW - Femtochemie KW - Pulsformung KW - Laser-Kontrolle KW - Femtosekunden-Spektroskopie KW - Coherent control KW - Femto-chemistry KW - pulse shaping KW - laser control KW - femtosecond spectroscopy Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24697 ER - TY - THES A1 - Küstner, Bernd T1 - Wirkstoff-Substrat-Charakterisierung und Protein-Lokalisierung mittels Raman-Streuung T1 - Drug-Target Characterization and Protein Localization via Raman Scattering N2 - In dieser Arbeit konnte gezeigt werden, wie verschiedene Techniken zur Verstärkung der Raman-Streuung eingesetzt werden können, um selektiv und sensitiv Wirkstoffe zu charakterisieren und Proteine zu lokalisieren. Die UV-Resonanz-Raman-Spektroskopie wurde zur selektiven Verfolgung der Wirkstoff-Substrat-Wechselwirkung zwischen einem Guanidiniocarbonyl-basierten Peptidrezeptor und seinem Substrat eingesetzt. Durch die enorme Resonanzverstärkung der Ramanstreuung konnten in einer Bindungsstudie die spektralen Änderung bei der Komplexierung des Rezeptors mit einem Tetrapeptid bei submillimolarer Konzentration in Wasser verfolgt werden. Die oberflächenverstärkte Raman-Streuung (surface-enhanced Raman scattering, SERS) wurde zur ultrasensitiven Detektion von festphasengebundenen Substanzen eingesetzt. Die selektive Verstärkung der auf dem Harz gebundenen Substanz wurde durch aggregierte Silber-Nanopartikeln auf der Oberfläche der Harzkügelchen ermöglicht. So konnte auf einem einzigen Harzkügelchen in wenigen Sekunden das SERS-Spektrum einer Substanzmenge von nur 50 fmol aufgenommen werden. In einem SERS-mikroskopischen Raster-Experiment an der Oberfläche eines einzelnen Harzpartikels konnte die hohe Reproduzierbarkeit dieser Technik demonstriert werden. Zwei neue SERS-Marker zur Detektion von Biomolekülen werden abschließend vorgestellt. Bei beiden Marker-Typen werden die Raman-Signale von selbstorganisierenden Monolagen (self-assembled monolayer, SAM) aus Raman-Markern durch Gold/Silber-Nanoschalen als SERS-Substrat verstärkt. Der erste neue SERS-Marker-Typ wurde mit einer SAM aus Raman-Markern mit zwei unterschiedlich langen hydrophilen Abstandshalter-Gruppen synthetisiert. Über das Verhältnis von kurzem zu langem Abstandshalter kann die sterische Hinderung der Bindungsstellen in der SAM zur kontrollierten Konjugation an Antikörper minimiert werden. Der zweite SERS-Marker-Typ beruht auf der Silicaverkapselung einer SAM auf den Gold/Silber-Nanoschalen. Die silicaverkapselten SERS-Marker konnten nach der Oberflächenfunktionalisierung mit Amino-Gruppen über heterobifunktionelle Verknüpfungsreagenzien an Antikörper gekoppelt werden. Beide SERS-Marker wurden zur immunhistochemischen Lokalisierung des prostataspezifischen Antigens in Prostatagewebeschnitten eingesetzt. N2 - Different Raman techniques have been employed for the selective and sensitive characterization of drug-substrate interactions and for the selective localization of proteins. UV resonance Raman spectroscopy was used to monitor selectively the drug-target interaction between a guanidiniocarbonyl-based peptide receptor and its substrate. Due to the enormous resonance enhancement of the Raman scattering the spectral changes upon complexation of the receptor with a tetrapeptide could be characterized in a binding study at a submillimolar concentration in water. Surface-enhanced Raman scattering (SERS) was employed for the ultra-sensitive detection of solid-phase bound substances. The selective enhancement of the solid-phase bound substance was realized with help of aggregated silver nanoparticles on the surface of the solid support. It was possible to detect a total amount of only approx. 50 fmole of the substance on a single resin bead. The high reproducibility of this technique was demonstrated in a SERS mapping experiment. Two approaches to new SERS labels for the detection of biomolecules are presented. In both types of labels the signal is generated from self-assembled monolayers (SAM) of Raman labels on gold/silver nanoshells as the SERS substrate. The first new type of SERS labels was synthesized with a SAM of Raman labels containing hydrophilic spacer groups with different lengths. The stoichiometric ratio between the short and the long spacer allows a minimization of the sterical hinderance of the reactive groups in the SAM for a controlled conjugation to antibodies. The second type of SERS labels includes the silica-encapsulation of a SAM on gold/silver nanoshells. The surface of the silica-encapsulated SERS labels were aminofunctionalized and conjugated to antibodies via heterobifunctional crosslinkers. With both types of SERS labels the prostate-specific antigen as a target protein was localized in prostate tissue sections. KW - Raman-Effekt KW - Resonanz-Raman-Effekt KW - Oberflächenverstärkter Raman-Effekt KW - Kolloidchemie KW - Wirkstoff KW - Substrat KW - Bio-Nano-Technologie KW - Raman Scattering KW - Resonance Raman Effect KW - Surface Enhanced Raman Scattering KW - Colloid Chemistry KW - Bio Nano Technology Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-40845 ER - TY - THES A1 - Schneider, Michael T1 - Elektronische Spektroskopie und Photodissoziationsverhalten von heterocyclischen Biomolekülen T1 - Electronic spectroscopy and photodissociation behaviour of herocyclic biomolecules N2 - Das Photodissoziationsverhalten der Pyrimidinbasen Thymin, Uracil und 5-Methylcytosin wurde mittels Photofragment-Dopplerspektroskopie und Photofragment-Imaging untersucht. Die Photodissoziation erfolgt in allen Fällen in einem statistischen Prozess nach Mehrphotonenabsorption. Von Purin wurde ebenfalls die Photodissoziation untersucht sowie das elektronische Spektrum des niedrigsten n-pi*-Zustands mittels Photofragment-Anregungsspektroskopie und [1+1']-REMPI-Spektroskopie gemessen. Purin zeigt bei den untersuchten Wellenlängen dasselbe Verhalten wie die Pyrimidinbasen. Das Elektronische Spektrum von Purin zeigt über einen Bereich von über 2000 cm^-1 vom Bandenursprung gut strukturierte Banden, von denen die meisten oberhalb 850 cm^-1 als Kombinationsbanden identifiziert wurden. N2 - The photodissociation behaviour of the pyrimidine bases thymine, uracil and 5-methyl cytosine has been studied by photofragment doppler spectroscopy and photofragment imaging. In all cases, the photodissociation follows a statistical process after multiphoton absorption. The photodissociation of purine has also been studied and the spectrum of its lowest excited n-pi* state has been measured by photofragment excitation spectroscopy and [1+1']-REMPI spectroscopy. At the used wavelengths, purine shows the same photodissociation behaviour as the pyrimidine bases. The electronic spectrum of purine shows well structured peaks in a range of 2000 cm^-1 from the band origin. Most bands above 850 cm^-1 can be identified as combination bands. KW - Photodissoziation KW - Mehrphotonen-Spektroskopie KW - Doppler-Verbreiterung KW - Pyrimidinderivate KW - Purin KW - Photofragmentspektroskopie KW - photodissociation KW - multiphoton spectroscopy KW - doppler broadening KW - pyrimidines KW - purine Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-42190 ER - TY - THES A1 - Müller, Stefan T1 - Coherent Multiple-Quantum Multidimensional Fluorescence Spectroscopy T1 - Kohärente multidimensionale Multiquanten-Fluoreszenzspektroskopie N2 - This thesis describes novel concepts for the measurement of the static and dynamic properties of the electronic structure of molecules and nanocrystals in the liquid phase by means of coherent fluorescence-detected spectroscopy in two and three frequency dimensions. These concepts are based on the systematic variation ("phase cycling") of a sequence of multiple time-delayed femtosecond excitation pulses in order to decode a multitude of novel nonlinear signals from the resulting phase-dependent fluorescence signal. These signals represent any permutation of correlations between zero-, one-, two-, and three-quantum coherences. To this end, two new phase-cycling schemes have been developed which can simultaneously resolve and discriminate several nonlinear signals of sixth order, including those of the fourth order of nonlinearity. By means of the sixth-order signals recorded in this work, static properties of highly excited electronic states in molecules such as their energies, transition dipole moments, and relative displacement of electronic potential surfaces, as well as dynamic properties in terms of their relaxation kinetics, can be ascertained. Furthermore, it was shown that these signals are suitable for the characterization of exciton-exciton correlations in colloidal quantum dots and for the measurement of ultrafast exciton-exciton annihilation in molecular aggregates. The experiments performed in this thesis mark an important step towards the complete characterization of the nonlinear response of quantum systems. In view of this, the concept of fluorescence-detected multiple-quantum coherence multidimensional spectroscopy introduced here offers a unified, systematic approach. In virtue of the technical advantages such as the use of a single excitation beam and the absence of nonresonant contributions, the measurement protocols developed here can be directly transferred to other incoherent observables and to sample systems in other states of matter. Furthermore, the approaches presented here can be systematically extended to higher frequency dimensions and higher orders of nonlinearity. N2 - Diese Arbeit beschreibt neuartige Konzepte zur Messung der statischen und dynamischen Eigenschaften der elektronischen Stuktur von Molekülen und Nanokristallen in der flüssigen Phase mittels kohärenter Fluoreszenz-detektierter Spektroskopie in zwei und drei Frequenzdimensionen. Diese Konzepte beruhen auf der systematischen Phasenvariation ("Phase Cycling") einer Sequenz mehrerer zeitverzögerter Femtosekunden-Anregepulse, um aus dem resultierenden phasenabhängigen Fluoreszenzsignal eine Vielzahl von neuartigen nichtlinearen Signalen zu dekodieren. Diese Signale stellen jegliche Permutationen von Korrelationen zwischen Null-, Ein-, Zwei- und Drei-Quantenkohärenzen dar. Hierzu wurden zwei neue Phase-Cycling Schemata entwickelt, welche gleichzeitig mehrere nichtlineare Signale der sechsten Ordnung auflösen und voneinander unterscheiden können, inklusive der Signale der vierten nichtlinearen Ordnung. Mit den in dieser Arbeit aufgenommenen Signalen der sechsten Ordnung können statische Eigenschaften hoch-angeregter elektronischer Zustände in Molekülen wie deren Energien, Übergangsdipolmomente, relative Verschiebung elektronischer Potentialflächen zueinander, sowie dynamische Eigenschaften in Bezug auf deren Relaxationskinetik ermittelt werden. Ferner wurde gezeigt, dass diese Signale zur Charakterisierung von Exziton-Exziton-Korrelationen in kolloidalen Quantenpunkten sowie zur Messung ultraschneller Exziton-Exziton-Annihilierung in molekularen Aggregaten geeignet sind. Die Experimente dieser Arbeit markieren einen wichtigen Schritt in Richtung der vollständigen Charakterisierung der nichtlinearen Antwort von Quantensystemen. Das hier eingeführte Konzept der Fluoreszenz-detektierten multidimensionalen Multiquantenkohärenz-Spektroskopie bietet hierfür einen vereinheitlichten, systematischen Ansatz. In Hinblick auf technische Vorteile wie der Verwendung eines einzigen Anregestrahls und der Abwesenheit von nichtresonanten Beiträgen lassen sich die hier entwickelten Messprotokolle direkt auf andere inkohärente Observablen und auf Probesysteme in anderen Aggregatszuständen übertragen. Ferner lassen sich die vorgestellten Ansätze systematisch auf höhere Frequenzdimensionen und nichtlineare Ordnungen erweitern. KW - Coherent Multidimensional Spectroscopy KW - Ultrakurzzeitspektroskopie KW - Angeregter Zustand KW - Kohärente Anregung KW - Electronic spectroscopy KW - Time-resolved spectroscopy KW - Laser pulse shaping KW - Phase cycling KW - High-excited electronic states KW - Elektronische Spektroskopie KW - Zeitaufgelöste Spektroskopie KW - Laserimpulsformung KW - Phasenmodulation KW - Hochangeregte elektronische Zustände Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-244113 ER - TY - THES A1 - Schleier, Domenik T1 - Using Photoionization to Investigate Reactive Boron Species and the Kinetics of Hydrocarbon Radicals T1 - Die Untersuchung von Reaktiven Borspezies und die Kinetik von Kohlenwassterstoffradikalen mittels Photoionization N2 - This thesis highlights the importance of isomer-selective approaches for the complete analysis of chemical processes. The method of choice is photoelectron/photoion coincidence spectroscopy, which allows simultaneous detection of electrons and ions coming from a single ionization event. Ionization techniques are sensitive and can record multiple species simultaneously, rendering them ideal tools to probe molecular transformations. Coupling these setups to synchrotron radiation allows one to analyze complex mixtures with isomer selectivity, based on ionization energies and vibrational structure in the cation, without any prior separation steps. Only few setups exist that can be used to gather these data, although their impact and applicability is growing steadily in various fields. For closed-shell species an easier and more widely used method is gas-chromatography, but most open shell species would not survive the separation process. Due to the reactivity of radicals they have to be created by selectively converting stable precursor molecules. Depending on the radical generation method different properties can be investigated ranging from thermodynamic data, over concentrations in high temperature environments, to chemical kinetics. The first part of this thesis deals with the determination of bimolecular rate constants. Isomeric hydrocarbon radicals were generated by a high intense UV light pulses and their kinetics with oxygen was measured. The pressure dependence of different isomers in the falloff region was compared to theoretical models, and their reactivity could be explained. The second part deals with boron containing compounds in various electronic situations. The corresponding precursors were successfully synthesized or could be bought. They were subjected to fluorine atoms in chemical reactors or destroyed pyrolytically at high temperatures. Most investigated species exhibited vibronic effects that could be elucidated using high level computations. N2 - Die vorliegende Arbeit lässt sich in zwei Unterkategorien gliedern. Sie befasst sich zum einen mit der isomerenselektiven Identifikation von hochreaktiven anorganischen Verbindungen. Zum anderen werden Ratenkonstanten für die Reaktionen verschiedener Kohlenwasserstoffradikale mit Sauerstoff ermittelt. Beide Bereiche sind durch die Frage der Energiespeicherung und -gewinnung in der Zukunft unmittelbar miteinander verbunden. Die Herausforderung reaktive Moleküle zu untersuchen, liegt oft darin sie in einer inerten Atmosphäre erzeugen zu müssen. Nur unter diesen Bedingungen hat ihre Reaktivität kaum Möglichkeiten sich zu entfalten. Hierzu wurden stabile Vorläufermoleküle in die Gasphase überführt und in einer verdünnten Umgebung möglichst selektiv in die gewünschte Radikalspezies überführt. Sowohl deren isomereselektive Identifikation als auch die Bestimmung der Ratenkonstanten wurde mittels Schwellenphotoelektronenspektroskopie durchgeführt. Mit Hilfe eines Photoelektron/Photoion Koinzidenz (PEPICO) Aufbaus konnten massenselektive Signale detektiert werden. Diese Methode benötigt eine Lichtquelle, die eine hohe Repetitionsrate aufweist und im VUV-Bereich komplett spektral durchstimmbar ist. Diese Voraussetzungen sind an Synchrotron-Strahlungsquellen verfügbar, weshalb die Experimente in dieser Arbeit an den entsprechenden Strahllinien an der SwissLightSource oder am Synchrotron SOLEIL durchgeführt wurden. Zur Unterstützung der experimentellen Daten wurden durch quantenchemische Rechnungen und Simulationen durchgeführt, aus denen eine klare isomerenselektive Zuordnung des jeweiligen Signals erfolgt. Die gesuchten Ratenkonstanten konnten mittels geeigneter Programme aus den Kinetikdaten extrahiert werden, wobei auch die Ratenkonstanten der Seitenreaktionen berücksichtigt wurden. KW - Biradikal KW - Kinetics KW - Spectroscopy KW - Photolysis KW - Radicals KW - Biradicals KW - Fotoionisation KW - Fotolyse KW - Synchrotronstrahlung KW - Synchrotron Radiation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-242137 ER - TY - THES A1 - Flock, Marco T1 - Velocity Map Imaging-Untersuchung nichtstrahlender Prozesse in polyzyklischen Aromaten und deren van-der-Waals-Clustern T1 - A Velocity Map Imaging study on nonradiative processes in polycyclic aromatics and their van der Waals clusters N2 - Das erste Ziel der vorliegenden Dissertation bestand darin, ein bereits bestehendes TOF-MS-Setup dahingehend zu erweitern, um damit Velocity Map Imaging-Experimente durchführen zu können. Dies erforderte zunächst die Konzipierung und Programmierung einiger für die Datenaufnahme, -verarbeitung und -analyse benötigter LabView-Anwendungen. Anschließend konnten erste Kalibrierexperimente an Methyliodid, in denen wichtige experimentelle Parameter identifiziert und optimiert wurden, durchgeführt werden. Außerdem gelang es dadurch, die Messgenauigkeit des Setups auf 0.7 % und dessen Auflösungsvermögen auf 4.4 % zu bestimmen, was im Bereich für VMI-Apparaturen typischer Werte liegt. Zur weiteren Überprüfung der Funktionstüchtigkeit des Setups wurde in ersten zeitaufgelösten Experimenten im Folgenden die Desaktivierung des S1-Zustands von Pyridin untersucht. Neben der Reproduktion einiger bereits literaturbekannter Resultate konnten dabei zusätzlich die im Multiphotonen-Ionisationsschritt populierten Rydberg-Zustände identifiziert werden. Anschließend wurde mit Experimenten an bisher weniger gut untersuchten organischen Aromaten und Heteroaromaten fortgefahren. Das Ziel dieser Studien lag in der Aufklärung der photoinduzierten Dynamiken der Verbindungen, wobei das zur Verfügung stehende ps-Lasersystem die Möglichkeit bot, die Desaktivierung elektronisch angeregter Zustände gezielt in Abhängigkeit von deren Schwingungsenergie zu untersuchen. Der darin bestehende Vorteil zeigte sich vor allem in Studien an Tolan und Phenanthridin, deren erste angeregte, optisch aktive Zustände am Origin Lebensdauern im ns-Bereich aufweisen, die sich mit zunehmender vibronischer Anregung jedoch auf bis zu 10 ps verringern. Als Grund dafür konnten nichtstrahlende Desaktivierungsprozesse, für deren Eintreten eine energetische Barriere überwunden werden muss, identifiziert werden. Während in Tolan nach Photoanregung ein Übergang in einen (πσ∗)-Zustand, der zur Ausbildung einer trans-bent-Struktur führt, erfolgt, ist im Falle von Phenanthridin vermutlich ein El-Sayed-erlaubter ISC-Übergang in einen 3(nπ∗)-Zustand für die drastische Verkürzung der S1-Lebensdauer verantwortlich. Ein solcher konnte weder im zu Phenanthridin isomerischen Benzo[h]quinolin, noch in dessen PAH-Muttermolekül Phenanthren beobachtet werden, was auf die höhere energetische Lage bzw. die Abwesenheit des mittels ISC populierten 3(nπ∗)-Zustands in diesen Molekülen zurückgeführt werden kann. In weiteren im Rahmen der vorliegenden Arbeit durchgeführten Experimente wurden zudem die aromatischen Moleküle Acenaphthylen und 4-(Dimethylamino)benzethin (DMABE) untersucht. Zeitaufgelöste Studien zeigten dabei, dass die Desaktivierung der S2-Zustände beider Moleküle auf der sub-ps-Zeitskala stattfindet und mit dem vorhandenen Lasersystem daher nicht aufgelöst werden kann. In Acenaphthylen erfolgt die S2-Relaxation größtenteils über einen sequentiellen IC-Mechanismus, innerhalb dem der S1-Zustand des Moleküls intermediär besetzt wird. Dessen Lebensdauer konnte am Origin auf 380 ps bestimmt werden, fällt mit steigender Schwingungsanregung jedoch auf bis zu 55 ps ab. Für die Desaktivierung des S2-Zustands von DMABE konnte hingegen ein paralleles Relaxationsmodell, in dem neben dem S1-Zustand ein weiterer elektronisch angeregter Zustand populiert wird, nachgewiesen werden. Bei diesem könnte es sich möglicherweise um einen (πσ∗)-Zustand, dessen Besetzung die Ausbildung einer trans-bent-Geometrie innerhalb der Acetylen-Einheit des Moleküls zur Folge hat, handeln. Einen weiteren großen Teil der vorliegenden Dissertation nahmen Experimente an van-der-Waals-gebundenen Clustersystemen ein. Im Fokus der Studien standen dabei Moleküle mit ausgedehnten aromatischen π-Systemen, da solche eine hohe Relevanz für verschiedene materialwissenschaftliche Forschungsgebiete besitzen. Ein Beispiel hierfür ist Tetracen, welches als Modellsystem für die Untersuchung von Singlet Fission-Prozessen angesehen wird. In Kombination mit nichtadiabatischen Surface-Hopping-Simulationen zeigten Experimente an Tetracen-Dimeren, dass nach deren S2-Anregung zunächst ein schneller S1←S2-Übergang (τ < 1 ps), gefolgt von der Ausbildung einer Excimerstruktur, stattfindet. Letztere erfolgt mit einer Zeitkonstante von 62 ps und führt zu einem Anstieg des transienten Ionensignals, wohingegen die Desaktivierung des Excimer-Zustands von einem abklingenden Signalbeitrag mit τ = 123 ps repräsentiert wird. Wenngleich über die weitere Relaxation der Excimerspezies zum gegenwärtigen Zeitpunkt keine Aussage getroffen werden kann, besteht damit die Möglichkeit, dass Excimer-Zustände als Zwischenstufe im SF-Mechanismus isolierter Tetracen-Dimere auftreten. In zeitaufgelösten Experimenten an Phenanthren-Dimeren konnte ebenfalls ein Anstieg des transienten Signals mit einer vergleichbaren Zeitkonstante von τ = 86 ps, der jedoch auf einem konstanten Signaloffset endet, gefunden werden. Dies deutet darauf hin, dass auch Phenanthren-Dimere in der Lage sind, Excimerstrukturen, die im Gegensatz zu denen des Tetracens jedoch deutlich langlebiger sind, auszubilden. Studien an den Dimerspezies der Azaphenanthrene Benzo[h]quinolin und Phenanthridin offenbarten hingegen etwas schnellere Relaxationen mit Zeitkonstanten von 15 bzw. 40 ps. Zudem zeigten beide Spezies eine stark ausgeprägte Fragmentation, sodass für deren Untersuchung auf die VMI-Detektionsmethode zurückgegriffen werden musste. Dadurch wurde deutlich, dass sich Photoionen-Imaging-Experimente hervorragend für Studien an schwach gebundenen Clustersystemen eignen, da diese die Separation verschiedener Signalbeiträge innerhalb eines betrachteten Massenkanals ermöglichen. N2 - In the first part of this thesis an already existing TOF-MS setup was modified in order to enable Velocity Map Imaging experiments. Therefore, LabView programs for the aquisition, processing and evaluation of the experimental data had to be written. Afterwards, calibration experiments on methyl iodide were carried out to characterize and to optimize important experimental parameters. The experiments yielded values of 4.4 % and 0.7 % for the spectral resolution and the accuracy of the setup, respectively, in good agreement with reported values for typical VMI setups. In the next step, time-resolved experiments on the S1 state deactivation in pyridine were performed in order to further verify the functionality of the setup. In these experiments, several results from literature could be reproduced and additional information on the Rydberg states being populated during the multiphoton ionization of the molecules were obtained. Thus, the experiments proved the suitability of the setup and experiments on less well studied systems were carried out in the following. The goal of these studies was to elucidate the light-induced relaxation mechanisms of selected organic aromatics and heteroaromatics. Due to the spectral bandwidth of the available ps laser setup, dynamics of electronically excited states could be studied as a function of their vibronic energy. This advantage became obvious especially in studies on tolane and phenanthridine: In both molecules, the lifetime of the first excited bright state is in the ns range at its origin, but drops to around 10 ps at higher excitation energies. The reason therefore are nonradiative relaxation processes which can only take place when an energetic barrier is surmounted. In case of tolane, a transition to a (πσ∗) state, leading to the formation of a trans-bent structure, was found to occur at higher excitations. In contrast, an El-Sayed allowed ISC process to a (nπ∗) triplet state seems to be responsible for the drop of the S1 state lifetime in phenanthridine. Interestingly, neither in the isomeric azaphenanthrene benzo[h]quinoline, nor in the PAH parent molecule phenanthrene itself, such a behavior was observed. This is attributed to the higher energy of the first excited (nπ∗) triplet state in benzo[h]quinoline and its absence in phenanthrene, respectively. Further experiments presented in this thesis aimed to elucidate the excited-state dynamics of acenaphthylene and 4-(dimethylamino)benzethyne (DMABE). Time-resolved studies on both molecules revealed S2 state deactivations on the sub-picosecond timescale which thus can not be resolved with the available ps laser setup. In acenaphthylene, a subsequent IC relaxation back to the electronic ground state was found to occur upon S2 excitation and the lifetime of the intermediately populated S1 state was determined to 380 ps at its origin and to 55 ps at higher excitation energies. The S2 state of DMABE relaxes to the S1 state as well, but in addition, the population of another electronic state, which might possibly be a trans-bent (πσ∗) state, was observed. Another large part of the experimental work within this thesis was covered from studies on van der Waals clusters of different aromatic and heteroaromatic compounds. The investigations focused on molecules with extended π -systems, since those possess photophysical properties with high relevance for various applications in material science. As an example, tetracene dimers can be seen as a prototype for the singlet fission process and thus were studied in the scope of this work. In time-resolved experiments, a sequential relaxation with time constants of 62 and 123 ps was observed upon excitation of their S2 state. Based on non-adiabatic surface hopping simulations the time constants could be assigned to the formation and the following decay of an excimer species. Thus, the excimer state could act as an intermediate in the SF mechanism of isolated tetracene dimers, although no information on its further deactivation are available so far. Interestingly, the formation of the excimer state leads to a rise in the transient ion signal, whereas its deactivation correlates with a decaying contribution. A similar behavior was found in experiments on phenanthrene dimers, which relax to a long-lived electronic state with a rising time constant of 86 ps. This indicates that excimer structures are formed upon photoexcitation in phenanthrene dimers as well. However, since their deactivation was not observed on the timescale of the experiment, the phenanthrene excimers seem to possess a much longer lifetime than their tetracene analogues. Studies on the dimeric species of the phenanthrene aza-derivatives benzo[h]quinoline and phenanthridine revealed slightly faster deactivation processes with time constants of 15 and 40 ps, respectively. Furthermore, the multimers of both compounds showed strong fragmentations and thus had to be studied via VMI detection. Thereby it became obvious that photoion imaging experiments are an excellent tool for investigations on weakly bound van der Waals clusters, since they allow to distinguish between different signal contributions in a given mass channel. KW - Strahlungslose Desaktivierung KW - Photoelektronenspektroskopie KW - Molekularstrahl KW - REMPI KW - Pump-Probe-Technik KW - Velocity Map Imaging KW - Zeitaufgelöste Spektroskopie KW - Polycyclische Aromaten KW - Photophysik KW - Physikalische Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-240786 ER - TY - THES A1 - Keß, Martin T1 - Wellenfunktionsbasierte Beschreibung der zweidimensionalen vibronischen Spektroskopie von molekularen Aggregaten und Ladungstransfersystemen T1 - Wave-function based description of the two-dimensional vibronic spectroscopy of molecular aggregates and charge-transfer systems N2 - Diese Arbeit befasst sich mit zeitaufgelösten Prozessen in molekularen Systemen. Dabei wurde sowohl die Wellenpaketdynamik nach Photoanregung betrachtet als auch spektrale Eigenschaften mittels Absorptions- und zweidimensionaler Spektroskopie untersucht. Zunächst widmet sich die Arbeit der Wellenpaket- und Populationsdynamik in zwei diabatischen, gekoppelten Zuständen. Nach impulsiver Anregung aus dem zu Beginn besetzten Zustand treten in der Populationsdynamik zwei deutlich verschiedene Oszillationen auf. Der langsamer variierende Populationstransfer besitzt die Periodendauer der Vibrationsbewegung und ist auf einen Wechsel der Zustände beim Durchlaufen des Wellenpakets durch die Kreuzungsregion der diabatischen Potentiale zurückzuführen. Die ultraschnelle Komponente mit einer Periodendauer von etwa 4 fs lässt sich als eine Art Rabi-Oszillation beschreiben, die durch die (zeitunabhängige) Kopplung hervorgerufen wird. Sie wurde mit Hilfe von analytischen Berechnungen ausführlich charakterisiert. Damit dieser Prozess auftreten kann müssen mehrere Bedingungen erfüllt werden: Das Wellenpaket muss über die Dauer der Oszillationen annähernd örtlich lokalisiert bleiben; dies ist an den Umkehrpunkten der Wellenpaketsbewegung der Fall. Die Amplitude der Oszillationen in den Populationen ist proportional zum Verhältnis der Kopplung zum Energieabstand der Zustände. Deshalb muss an den stationären Stellen die Kopplung groß im Vergleich zum Energieabstand sein. Die Amplitude der Oszillationen hängt außerdem von dem Populationsverhältnis und den Phasen der Komponenten des Wellenpakets in den beiden Zuständen ab. Die ultraschnellen Oszillationen bleiben auch in mehrdimensionalen Systemen mit unterschiedlichen Vibrationsfrequenzen je Freiheitsgrad erhalten. Das gleiche Modell wurde benutzt, um Ladungstransferprozesse mittels linearer und 2D-Spektroskopie zu untersuchen. Eine Kopplung an die Umgebung wurde, aufbauend auf einer Quanten-Master-Gleichung in Markov-Näherung, wellenfunktionsbasiert mittels eines Quantum-Jump-Algorithmus mit expliziter Dephasierung beschrieben. Dabei findet mit vorher definierten Wahrscheinlichkeiten zu jedem Zeitschritt einer von drei stochastischen Prozessen statt. Neben kohärenter Propagation können Sprünge in einen anderen Eigenzustand des Systems und Dephasierungen auftreten. Zwei Dissipationsparameter spielen dabei eine Rolle. Dies ist zum einen die Stärke der System-Bad-Kopplung, welche die Gesamtrate der Energierelaxation beschreibt. Weiterhin beeinflusst die Dephasierungskonstante den Verlust kohärenter Phasen ohne Energieänderung. Fallenzustände wurden identifiziert, die durch sehr geringe Sprungraten in niedrigere Zustände charakterisiert sind. Die Langlebigkeit kann durch die Form der Eigenfunktionen erklärt werden, die eine deutlich andere Wahrscheinlichkeitsverteilung als die der Nicht-Fallenzustände besitzen. Dadurch werden die in die Sprungraten eingehenden Matrixelemente klein. Das Absorptionsspektrum zeigt Peaks an der Stelle der Fallenzustände, da nur die Eigenfunktionen der Fallenzustände große Franck-Condon-Faktoren mit der Anfangswellenfunktion besitzen. Verschiedene Kombinationen der Dissipationsparameter führen zu Änderungen der relativen Peakintensitäten und der Peakbreiten. Die 2D-Spektren des Ladungstransfersystems werden störungstheoretisch über die Polarisation dritter Ordnung berechnet. Sie zeigen viele eng nebeneinander liegende Peaks in einer schachbrettmusterförmigen Anordnung, die sich auf Übergänge unter Mitwirkung der Fallenzustände zurückführen lassen. Höhere System-Bad-Kopplungen führen aufgrund der effizienten Energiedissipation zu einer Verschiebung zu kleineren Energien. Peaks, die mit schneller zerfallenden Fallenzuständen korrespondieren, bleichen schneller aus. Höhere Dephasierungskonstanten resultieren in verbreiterten Peaks. Um den Einfluss der Dissipation genauer zu charakterisieren, wurden gefilterte 2D-Spektren betrachtet. Dazu wurden Ausschnitte der Polarisation dritter Ordnung zu verschiedenen Zeiten fouriertransformiert. Längere Zeiten führen zu einer effektiveren Energierelaxation entlang der entsprechenden Zeitvariablen. Die Entvölkerung der höher liegenden Zustände lässt sich somit zeit- und energieaufgelöst betrachten. Weiterhin wurde gezeigt, dass sich der Zerfall eines einzelnen Peaks mit dem Populationsabfall des damit korrespondierenden Eigenzustandes in Einklang bringen lässt, obwohl die Zuordnung der Peaks im 2D-Spektrum zu Übergängen zwischen definierten Eigenzuständen nicht eindeutig ist. Mit dem benutzten eindimensionalen Modell können auch Ladungstransferprozesse in organischen gemischtvalenten Verbindungen beschrieben werden. Es wurde die Frage untersucht, welche Prozesse nach einem optisch induzierten Energietransfer in solchen Systemen ablaufen. Experimentelle Daten (aufgenommen im Arbeitskreis von Prof. Lambert) deuten auf eine schnelle interne Konversion (IC) gefolgt von Thermalisierung hin. Um dies theoretisch zu überprüfen, wurden Absorptionsspektren bei verschiedenen Temperaturen berechnet und mit den gemessenen transienten Spektren verglichen. Es findet sich, abhängig von der Stärke der elektronischen Kopplung, eine sehr gute bis gute Übereinstimmung, was die Annahme eines schnellen ICs stützt. Im letzten Teil der Arbeit wurden vibronische 2D-Spektren von molekularen Aggregaten betrachtet. Dazu wurde die zeitabhängige Schrödingergleichung für ein Monomer-, Dimer- und Trimersystem mit der Multi-Configuration Time-Dependent Hartree-Methode gelöst und die Polarisation nicht-störungstheoretisch berechnet. Der Hamiltonoperator des Trimers umfasst hierbei sieben gekoppelte elektronische Zustände und drei bzw. sechs Vibrationsfreiheitsgrade. Der betrachtete Photonenecho-Beitrag der Polarisation wurde mittels phasencodierter Laserpulse extrahiert. Die resultierenden Spektren sind geometrieabhängig, ein Winkel zwischen den Übergangsdipolmomenten der Monomere von 0° (180°) resultiert in einem H-Aggregat (J-Aggregat). Die Lage und Intensität der Peaks im rein elektronischen Trimer wurde analytisch erläutert. Die Spektren unter Einbeziehung der Vibration zeigen eine ausgeprägte vibronische Struktur. Es wurde gezeigt, wie die Spektren für höhere Aggregationsgrade durch die höhere Dichte an vibronischen Zuständen komplexer werden. Im J-Aggregat ist mit zunehmender Aggregation eine stärkere Rotverschiebung zu sehen. Das Spektrum des H-Aggregats zeigt eine im Vergleich zum J-Aggregat kompliziertere Struktur. Die Verwendung zweier Vibrationsfreiheitsgrade je Monomer führt zu Spektren mit überlappenden Peaks und einer zusätzlichen vibronischen Progression. Der Vergleich von Spektren verschiedener Mischungen von Monomer, Dimer und Trimer, entsprechend einem von Temperatur und Konzentration abhängigen Aggregationsgrad, zeigt den Einfluss dieser experimentellen Faktoren. Schließlich wurden mögliche Ansätze aufgezeigt, anhand der Spektren auf den Aggregationsgrad zu schließen. N2 - This work studies time-resolved phenomena in molecular systems. Both, the wave-packet dynamics after photoexcitation and the spectral properties, examined via absorption and two-dimensional spectroscopy, are regarded. First, the wave-packet and population dynamics in two coupled diabatic states are considered. After an impulsive excitation from the initially populated state, two significantly different oscillatory features are visible in the population dynamics. The slower varying population transfer follows the oscillation period of the vibrational motion and results from the diabatic transition when the wave-packet passes through the crossing region of the respective potentials. The ultrafast oscillatory component with an oscillation period of about 4 fs can be described as a Rabi-like oscillation induced by the (time-independent) coupling. It is characterized in detail via analytic calculations. For this contribution to be visible, some conditions have to be met: The wave-packet needs to be spatially localized during the duration of the oscillations. This is the case at the classical turning points of the wave-packet motion. The oscillations' amplitude seen in the populations is proportional to the ratio between the coupling and the energetic gap between the involved states. This means that the coupling needs to be large compared to the energy separation at the points where the wave-packet is stationary. Additionally, the amplitude depends on the relative populations and the phases of the wave-packet components in the two states. The ultrafast oscillations persist in systems of higher dimensionality with different vibrational frequencies in each degree of freedom. The same model is used to examine charge-transfer processes via linear and 2D spectroscopy. A coupling to the environment is described by a quantum-jump algorithm with explicit treatment of dephasing, based on a quantum-master equation in Markov approximation. At each time step, one of three stochastic processes takes place with a pre-defined probability. Besides coherent propagation, jumps into other eigenstates of the system and dephasing occur. Two dissipation parameters are of relevance. The first is the value of the system-bath coupling which influences the overall energy relaxation rate while, additionally, the dephasing constant causes a loss of phase coherence without energy relaxation. Trap states are identified, which are characterized by very low jump rates to lower states. Their slow decay can be explained by the shape of their respective eigenfunctions, which possess a vastly different probability density than eigenstates of the non-trap states. This results in small matrix elements entering in the equations for the jump rates. The absorption spectrum exhibits peaks at the energies of the trap states because only the trap states' eigenfunctions lead to large Franck-Condon factors with the initial wave function. Different values of the dissipation parameters lead to changes in the relative peak intensities and peak widths. The 2D spectra of the charge-transfer system are calculated via the third-order polarization. They show many close lying peaks in a chessboard like distribution. The peaks can be traced back to transitions involving the trap states. Higher values of the system-bath coupling lead to a shift to lower energies because of the more efficient energy dissipation. Peaks corresponding to faster decaying trap states show more substantial loss in intensity as compared to other peaks. Higher values of the dephasing constant result in broader peaks. To better characterize the influence of the dissipation, we consider filtered 2D spectra. Therefore, cuts of the third-order polarization at different times are Fourier-transformed separately. Cuts at later times map the more effective energy relaxation along the respective time-variable. Via this technique the de-population of higher lying states can be monitored both in time and energy. Additionally it is shown that the decay of a specific peak can be related to the population decay of the corresponding eigenstate, even though the assignment of peaks in the 2D spectrum to transitions between eigenstates is not unique. The one-dimensional model can also be used to examine charge-transfer processes in organic mixed-valence compounds. Here, the question is, which processes take place after an optically induced energy transfer. Transient absorption spectra, recorded in the group of Prof. Lambert, hint to a fast internal conversion (IC) followed by thermalisation. To check this theoretically, absorption spectra at different temperatures are calculated and compared to the measured transient spectra. Depending on the value of the electronic coupling element, a very good to good agreement is found, supporting the existence of a fast IC process. The last part of this work considers vibronic 2D spectra of molecular aggregates. Therefore, the time-dependent Schrödinger equation is solved with the Multi-Dimentional Time-Dependent Hartree-method for a monomer, dimer and trimer system, and the polarization is calculated via a non-perturbative scheme. The trimer Hamiltonian consists of seven coupled electronic states and three or six vibrational degrees of freedom, respectively. The photon-echo contribution of the polarization is extracted via phase-coded laser pulses. This results in geometry dependent spectra: An angle between the monomer transition dipole moments of 0° (180°) leads to an H-aggregate (J-aggregate). In the purely electronic system, the location and intensities of the peaks are explained analytically. The spectra including vibrations show a rich vibronic structure. It is shown that spectra for higher degrees of aggregation are more complex because of the higher density of vibronic states. The J-aggregate is stronger red shifted in larger aggregates. The spectrum of the H-aggregate possesses a more complicated structure as compared to the J-aggregate spectrum. The inclusion of a second vibrational degree of freedom into each monomer results in spectra with overlapping peaks and an additional vibrational progression. Spectra of different mixtures of monomer, dimer and trimer are compared. Because the level of aggregation depends on temperature and concentration, this documents the influence of the experimental conditions on the 2D spectra. Finally, possible approaches to infer the degree of aggregation from the spectra are discussed. KW - Quantenmechanik KW - Ladungstransfer KW - Quantendynamik KW - Zweidimensionale elektronische Spektroskopie KW - Aggregat KW - Spektroskopie KW - Dimension 2 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136458 ER - TY - THES A1 - Koch, Federico Juan T1 - Structure-Dependent Ultrafast Relaxation Dynamics in Multichromophoric Systems T1 - Strukturabhängigkeit ultraschneller Relaxationsdynamik in multichromophoren Systemen N2 - Time-resolved spectroscopy allows for analyzing light-induced energy conversion and chromophore–chromophore interactions in molecular systems, which is a prerequisite in the design of new materials and for improving the efficiency of opto-electronic devices. To elucidate photo-induced dynamics of complex molecular systems, transient absorption (TA) and coherent two-dimensional (2D) spectroscopy were employed and combined with additional experimental techniques, theoretical approaches, and simulation models in this work. A systematic series of merocyanines, synthetically varied in the number of chromophores and subsitution pattern, attached to a benzene unit was investigated in cooperation with the group of Prof. Dr. Frank Würthner at the University of Würzburg. The global analysis of several TA experiments, and additional coherent 2D spectroscopy experiments, provided the basis to elaborate a relaxation scheme which was applicable for all merocyanine systems under investigation. This relaxation scheme is based on a double minimum on the excited-state potential energy surface. One of these minima is assigned to an intramolecular charge-transfer state which is stabilized in the bis- and tris-chromophoric dyes by chromphore–chromophore interactions, resulting in an increase in excited-state lifetime. Electro-optical absorption and density functional theory (DFT) calculations revealed a preferential chromophore orientation which compensates most of the dipole moment of the individual chromophores. Based on this structural assignment the conformationdependent exciton energy splitting was calculated. The linear absorption spectra of the multi-chromophoric merocyanines could be described by a combination of monomeric and excitonic spectra. Subsequently, a structurally complex polymeric squaraine dye was studied in collaboration with the research groups of Prof. Dr. Christoph Lambert and Prof. Dr. Roland Mitric at the University of Würzburg. This polymer consists of a superposition of zigzag and helix structures depending on the solvent. High-level DFT calculations confirmed the previous assignment that zigzag and helix structures can be treated as J- and H-aggregates, respectively. TA experiments revealed that in dependence on the solvent as well as the excitation energy, ultrafast energy transfer within the squaraine polymer proceeds from initially excited helix segments to zigzag segments or vice versa. Additionally, 2D spectroscopy confirmed the observed sub-picosecond dynamics. In contrast to other conjugated polymers such as MEH-PPV, which is investigated in the last chapter, ultrafast energy transfer in squaraine polymers is based on the matching of the density of states between donor and acceptor segments due to the small reorganization energy in cyanine-like chromophores. Finally, the photo-induced dynamics of the aggregated phase of the conjugated polymer MEH-PPV was investigated in cooperation with the group of Prof. Dr. Anna Köhler at the University of Bayreuth. Our collaborators had previously described the aggregation of MEH-PPV upon cooling by the formation of so-called HJ-aggregates based on exciton theory. By TA measurements and by making use of an affiliated band analysis distinct relaxation processes in the excited state and to the ground state were discriminated. By employing 2D spectroscopy the energy transfer between different conjugated segments within the aggregated polymer was resolved. The initial exciton relaxation within the aggregated phase indicates a low exciton mobility, in contrast to the subsequent energy transfer between different chromophores within several picoseconds. This work contributes by its systematic study of structure-dependent relaxation dynamics to the basic understanding of the structure-function relationship within complex molecular systems. The investigated molecular classes display a high potential to increase efficiencies of opto-electronic devices, e.g., organic solar cells, by the selective choice of the molecular morphology. N2 - Zeitaufgelöste Spektroskopie ermöglicht die Untersuchung lichtinduzierter Energietransferprozesse und molekularer Wechselwirkungen. Derartige Ergebnisse bilden wiederum die Grundlage für die Entwicklung von Synthesestrategien für neuartige Materialien sowie für effizientere optoelektronische Anwendungen. Um die lichtinduzierte Dynamik komplexer molekularer Systeme aufzuklären, wurden die Techniken der transienten Absorption (TA) und der kohärenten zweidimensionalen (2D) Spektroskopie mit weiteren experimentellen Messungen sowie theoretischen Ansätzen und Simulationen kombiniert. In Kooperation mit der Forschungsgruppe von Prof. Dr. FrankWürthner an der Universität Würzburg wurde eine molekulare Serie von Merocyaninen untersucht, die sich in der Anzahl der Chromophore und dem Substitutionsmuster an einem Benzolring unterscheiden. Eine globale Analyse der TA-Experimente für die verschiedenen Moleküle der Serie sowie weitere kohärente 2D-Spektroskopie-Experimente ermöglichten es, ein Relaxationsmodell zu ermitteln, das für alle untersuchten Merocyaninsysteme anwendbar ist. Dieses Relaxationsmodell basiert auf einem doppelten Minimum in der Potentialfläche des ersten angeregten Zustands. Eines dieser Minima wurde einem intramolekularen Ladungstransferzustand zugeordnet, welcher durch die Wechselwirkung benachbarter Chromophore stabilisiert wird und dadurch einen Anstieg der Lebensdauer des angeregten Zustands bewirkt. Zusätzliche elektrooptische Absorptionsmessungen in Kombination mit Ergebnissen der Dichtefunktionaltheorie offenbarten eine bevorzugte relative Chromophororientierung, die das Dipolmoment eines einzelnen Chromophors weitestgehend kompensiert. Basierend auf dieser Strukturbestimmung wurde eine strukturabhängige Exzitonenaufspaltungsenergie ermittelt und mit der Aufspaltung in den linearen Absorptionsspektren verglichen. Die linearen Absorptionsspektren der multichromophoren Merocyanine können durch eine Kombination von monomerischen und exzitonischen Beiträgen beschrieben werden, was eine gewisse strukturelle Flexibilität erfordert. In einer weiteren Kooperation mit den Gruppen von Prof. Dr. Christoph Lambert und Prof. Dr. Roland Mitric der Universität Würzburg wurde ein strukturell komplexer, polymerer Squarainfarbstoff untersucht. Dieses Polymer besteht aus einer Superposition von Zickzack- und Helixstrukturen, welche lösungsmittelabhängig ist. Rechnungen basierend auf neuesten Methoden der Dichtefunktionaltheorie bestätigten die vorherige Zuordnung, dass Zickzack- und Helixstrukturen als J- und H-Aggregate behandelt werden können. Mittels transienter Absorption konnte ermittelt werden, dass in Abhängigkeit des Lösungsmittels sowie der Anregungsenergie ultraschneller Energietransfer innerhalb des Squarain-Polymers entweder von zunächst angeregten Helix- zu Zickzacksegmenten stattfindet oder von Zickzack- zu Helixsegmenten. Zusätzlich konnte die Subpikosekundendynamik durch die kohärente 2D-Spektroskopie bestätigt werden. Im Gegensatz zu anderen konjugierten Polymeren wie MEH-PPV, welches im letzten Kapitel dieser Arbeit behandelt wird, basiert der ultraschnelle Energietransfer in Squarainpolymeren auf dem energetischen Überlapp der Zustandsdichten von Donor- und Akzeptorsegmenten, welcher auf die geringe Reorganisationsenergie in cyaninähnlichen Farbstoffen beruht. Abschließend wurde die lichtinduzierte Dynamik der aggregierten Phase des konjugierten Polymers MEH-PPV in Kooperation mit der Gruppe von Prof. Dr. Anna Köhler von der Universität Bayreuth untersucht. Unsere Kooperationspartner hatten zuvor die Aggregation von MEH-PPV bei Abkühlung durch die Formation von sogenannten HJ-Aggregaten, welche auf der Exzitonentheorie beruhen, beschrieben. Durch transiente Absorptionsmessungen und einer zugehörigen Bandenanalyse konnte zwischen Relaxationsprozessen im angeregten Zustand und zurück zum Grundzustand unterschieden werden. Die Anwendung der kohärenten 2D-Spektroskopie ermöglichte es, Energietransferprozesse zwischen konjugierten Segmenten des aggregierten Polymers aufzuklären. Die anfängliche Exzitonenrelaxation innerhalb der aggregierten Phase deutet auf eine geringe Mobilität der Exzitonen hin, welche im Gegensatz zu den anschließenden Energietransferprozessen zwischen unterschiedlichen Chromophoren innerhalb einiger Pikosekunden steht. Diese Arbeit trägt durch eine systematische Untersuchung der strukturabhängigen Relaxationsdynamik zum grundlegenden Verständnis des Verhältnisses zwischen Struktur und Funktion von komplexen molekularen Systemen bei. Die untersuchten Molekülklassen weisen dabei ein hohes Potential auf, um durch gezielte Wahl der Morphologie zu einer Steigerung von Effizienzen in optoelektronischen Anwendungen, wie beispielsweise organischen Solarzellen, beizutragen. KW - Femtosekundenspektroskopie KW - Ultrakurzzeitspektroskopie KW - Molekülstruktur KW - Ultrafast Spectroscopy KW - Molecular Structure KW - Transient-Absorption Sectroscopy KW - Coherent two-dimensional Spectroscopy KW - Relaxation Dynamics KW - Polychromophores System KW - Verbindungen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136306 ER - TY - JOUR A1 - Rudolf, P. A1 - Kanal, F. A1 - Gehrig, D. A1 - Niesel, J. A1 - Brixner, T. A1 - Schatzschneider, U. A1 - Nuernberger, P. T1 - Femtosecond mid-infrared study of the aqueous solution photochemistry of a CO-releasing molecule (CORM) JF - EPJ Web of Conferences N2 - Ultraviolet irradiation of CO-releasing molecules (CORMs) in water eventually leads to the loss of several carbon monoxide ligands.We show for an exemplary manganese tricarbonyl CORM that only one ligand is photolyzed off on an ultrafast timescale and that some molecules may undergo geminate recombination. KW - Aqueous Solution Photochemistry KW - Femtosecond Mid-Infrared Study Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129104 VL - 41 ER - TY - JOUR A1 - Ruetzel, S. A1 - Kullmann, M. A1 - Buback, J. A1 - Nuernberger, P. A1 - Brixner, T. T1 - Exploring higher-lying electronic states of a molecular switch by coherent triggered-exchange 2D electronic spectroscopy JF - EPJ Web of Conferences N2 - We use pump-repump-probe transient absorption spectroscopy to investigate the role of higher-lying electronic states in the photochemistry of a molecular switch. Moreover, replacing the pump pulse by a pulse-shaper-generated phase-stable double pulse, triggered-exchange two-dimensional (TE2D) electronic spectroscopy is established in the visible regime. KW - higher lying electronic states KW - molecular switch Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129117 VL - 41 IS - 05001 ER - TY - JOUR A1 - Steinbacher, A. A1 - Buback, J. A1 - Nuernberger, P. A1 - Brixner, T. T1 - Precise and rapid detection of optical activity for accumulative femtosecond spectroscopy JF - EPJ Web of Conferences N2 - We present a fast and sensitive polarimeter combining common-path optical heterodyne interferometry and accumulative spectroscopy to detect rotatory power. The sensitivity of rotatory detection is determined to be 0.10 milli-degrees for a measurement time of only one second and an interaction length of 250 µm. Its suitability for femtosecond studies is demonstrated in a non-resonant two-photon photodissociation experiment. KW - Optical Activity KW - Accumulative Femtosecond Spectroscopy Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129124 VL - 41 ER - TY - THES A1 - Brüning, Christoph T1 - Quantendynamische Untersuchungen zur Exzitonenlokalisierung und linearen Spektroskopie in molekularen Oligomeren T1 - Quantum dynamical study on excition localization and linear spectroscopy in molecular oligomers N2 - Diese Arbeit befasst sich mit den spektralen Signaturen molekularer Aggregate sowie mit ihrer Wellenpakets- und Populationsdynamik in angeregten Zuständen unter dem Einfluss externer Störungen und photoinduzierter Asymmetrie. Hierzu werden quantendynamische numerische Berechnungen mit der Multi-Configuration Time-Dependent Hartree-Methode durchgeführt, um die angesprochenen Prozesse zu charakterisieren. Durch die Konzentration auf Modellrechnungen sind die qualitativen Ergebnisse dieser Arbeit auf viele Systeme übertragbar. Zunächst widmet sich die Arbeit den linearen UV/Vis-Absorptions- und Emissionsspektren von Aggregaten. Hier zeigt sich, dass die Anzahl der Größen, die ein Absorptionsspektrum bestimmen -- etwa die Anzahl der Chromophore, ihre geometrischen Anordnung und die elektronische Kopplung zwischen ihnen -- zu groß ist, um ihre numerischen Werte eindeutig aus den Spektren bestimmen zu können. Insbesondere können sich die Auswirkungen der Aggregatgröße und der Kopplungsstärke gegenseitig so beeinflussen, dass die Form der Absorptionsbande bei sehr unterschiedlichen Systemen nahezu identisch ist. Daraus ergeben sich Schwierigkeiten bei der Interpretation experimenteller Spektren, insbesondere von selbst-aggregierten Oligomeren, deren Größe unbekannt ist. Es ist daher notwendig, entweder die elektronische Kopplung oder die Anzahl der Monomere in einem Aggregat durch andere experimentelle Methoden unabhängig zu bestimmen. Ist die Aggregatgröße jedoch bekannt, können die Absorptionsspektren sehr wohl zur Bestimmung anderer Eigenschaften des Systems herangezogen werden. Dies wird durch die Untersuchung der Spektren kovalent gebundener zyklischer Aggregate aus drei und vier cis-Indolenin-Squarain-Molekülen als Beispiel für Systeme mit bekannter Größe dargestellt. Das zweite Hauptthema der Arbeit ist die Populationsdynamik in angeregten Zuständen molekularer Aggregate. Dazu werden numerische Rechnungen an Dimeren, Pentameren und Nonameren durchgeführt. Eine Asymmetrie, sei es im System selbst oder am Wellenpaket, das durch die Anregung entsteht, kann dazu führen, dass ein einzelnes Monomer dauerhaft bevorzugt populiert ist. Wenn durch eine externe Störung die Energie des angeregten Zustands bestimmter Monomere für eine gewisse Zeit erhöht ist, kommt es zu einer Lokalisation der Population in diesem energetisch höheren Zustand. In einem System mit weiteren internen Freiheitsgraden wird die Population auf benachbarte Monomere übertragen, wenn der Betrag der Energieverschiebung des gestörten Zustands mit dem Abstand der Schwingungsniveaus zusammenfällt. Der anfängliche Lokalisierungseffekt ist darüber hinaus zustandsspezifisch: Er wird durch die Überlappintegrale der Schwingungskomponenten der Wellenfunktion in den diabatischen angeregten elektronischen Zuständen bestimmt. Durch die Kombination von zwei Laserpulsen kann auch ein Wellenpaket in den angeregten Zuständen erzeugt werden, dessen Symmetrieachsen nicht mit denen der Potentialflächen des Systems zusammenfallen. Dadurch, dass hier die Asymmetrie schon im Wellenpaket vorliegt, kann es auch ohne äußere Störung zu einer Lokalisation der Population auf einem Monomer kommen. N2 - This work studies the spectral signatures of molecular aggregates as well as their excited-state wave-packet and population dynamics under the influence of external perturbations and photo-induced asymmetry. Quantum dynamical numerical calculations employing the Multi-Configuration Time-Dependent Hartee method are performed in order to characterize the aforementioned processes. Concentrating on model calculations, the results of this work can qualitatively be transferred to a variety of different systems. First, linear UV/Vis- absorption and emission spectra of aggregates are investigated. It becomes apparent that the number of quantities which determine an absorption spectrum -- such as the number of chromophores, their geometrical arrangement and the electronic coupling between them -- is too large to uniquely determine their numerical values from the specta. Especially, the effects of the aggregate size and the coupling strength can influence each other in a way such that nearly identical spectra are obtained for vastly different systems. This leads to difficulties in the interpretation of experimental spectra, in particular when investigating self-assembled oligomers whose size is unknown. It is thus necessary to determine either the number of monomers within the Aggregate or their electronic coupling independently via other experimental techniques. If the aggregate size is, however, known, absorption spectra provide a valuable tool for determining other properties of the system under investigation. This is shown by investigating the spectra of covalently linked aggregates comprised of three or four cis-Indolenine Squaraine dye molecules as an example for systems of known size. The second main topic of the thesis is the excited-state population dynamics of molecular aggregates. Here, numerical calculations for dimer, pentamer and nonamer systems are performed. It is shown that any asymmetry, originating from the system itself or from the photo-excited wave-packet, leads to a quasi-permanent enhancement of the population of a single monomer unit. When the energy of the excited states of certain monomers is increased by an external perturbation, the excited-state population is, after a very short time, localized in the state with higher energy. In a system that features additional internal degrees of freedom, the population is transferred to neighboring Monomers if the energy shift of the perturbed state is in resonance with the spacing of the vibrational levels. In addition, the inital localization effect is state-specific as it is determined by the overlap integral of the vibrational wave-function components in the diabatic electronic states. By combining two laser pulses, it is possible to generate an excited-state wave-packet whose axes of symmetry do not coincide with those of the potential energy surfaces of the system. Since, here, the asymmetry is already contained in the wave-packet, localization of the population on a single monomer is possible even without an external perturbation. KW - Kurzzeitphysik KW - Wellenpaket KW - Molekularbewegung KW - Physikalische Chemie KW - Quantendynamik KW - quantum dynamics Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-139413 ER - TY - THES A1 - Becker, Johannes T1 - Development and implementation of new simulation possibilities in the CAST program package T1 - Entwicklung und Implementierung neuer Simulationsmöglichkeiten in das CAST Programmpaket N2 - The aim of the present work is the development and implementation of new simulation possibilities for the CAST program package. Development included, among other things, the partial parallelization of the already existing force fields, extension of the treatment of electrostatic interactions and implementation of molecular dynamics and free energy algorithms. The most time consuming part of force field calculations is the evaluation of the nonbonded interactions. The calculation of these interactions has been parallelized and it could be shown to yield a significant speed up for multi-core calculations compared to the serial execution on only one CPU. For both, simple energy/gradient as well as molecular dynamics simulations the computational time could be significantly reduced. To further increase the performance of calculations employing a cutoff radius, a linkedcell algorithm was implemented which is able to build up the non-bonded interaction list up to 7 times faster than the original algorithm. To provide access to dynamic properties based on the natural time evolution of a system, a molecular dynamics code has been implemented. The MD implementation features two integration schemes for the equations of motion which are able to generate stable trajectories. The basic MD algorithm as described in Section 1.2 leads to the sampling in the microcanonical (NVE) ensemble. The practical use of NVE simulations is limited though because it does not correspond to any experimentally realistic situation. More realistic simulation conditions are found in the isothermal (NVT) and isothermalisobaric (NPT) ensembles. To generate those ensembles, temperature and pressure control has been implemented. The temperature can be controlled in two ways: by direct velocity scaling and by a Nose-Hoover thermostat which produces a real canonical ensemble. The pressure coupling is realized by implementation of a Berendsen barostat. The pressure coupling can be used for isotropic or anisotropic box dimensions with the restriction that the angles of the box need to be 90� . A crucial simulation parameter in MD simulations is the length of the timestep. The timestep is usually in the rang of 1fs. Increasing the timestep beyond 1fs can lead to unstable trajectories since the fastest motion in the system, usually the H-X stretch vibration can not be sampled anymore. A way to allow for bigger timesteps is the use of a constraint algorithm which constrains the H-X bonds to the equilibrium distance. For this the RATTLE algorithm has been implemented in the CAST program. The velocity Verlet algorithm in combination with the RATTLE algorithm has been shown to yield stable trajectories for an arbitrary length of simulation time. In a first application the MD implementation is used in conjunction with the MOPAC interface for the investigation of PBI sidechains and their rigidity. The theoretical investigations show a nice agreement with experimentally obtained results. Based on the MD techniques two algorithms for the determination of free energy differences have been implemented. The umbrella sampling algorithm can be used to determine the free energy change along a reaction coordinate based on distances or dihedral angles. The implementation was tested on the stretching of a deca-L-alanine and the rotation barrier of butane in vacuum. The results are in nearly perfect agreement with literature values. For the FEP implementation calculations were performed for a zero-sum transformation of ethane in explicit solvent, the charging of a sodium ion in explicit solvent and the transformations of a tripeptide in explicit solvent. All results are in agreement with benchmark calculations of the NAMD program as well as literature values. The FEP formalism was then applied to determine the relative binding free energies between two inhibitors in an inhibitor-protein complex. Next to force fields, ab-initio methods can be used for simulations and global optimizations. Since the performance of such methods is usually significantly poorer than force field applications, the use for global optimizations is limited. Nevertheless significant progress has been made by porting these codes to GPUs. In order to make use of these developments a MPI interface has been implemented into CAST for communication with the DFT code TeraChem. The CAST/TeraChem combination has been tested on the $H_2 O_{10}$ cluster as well as the polypeptide met-Enkephalin. The pure ab-initio calculations showed a superior behavior compared to the standard procedure where the force field results are usually refined using quantum chemical methods. N2 - Das Ziel der hier vorliegenden Arbeit ist die Entwicklung und Implementierung neu- er Simulationsalgorithmen in das CAST Programmpaket. Neben der teilweisen Para- llelisierung der bereits impelentierten Kraftfelder wurde das Programm um einen Mole- kulardynamikcode erweitert. Aufbauend auf diesem Code wurden Algorithmen zur Be- rechnung der freien Energie entlang einer Reaktionskooridnate, sowie eine Erweiter-ung der Behandlung elektrostatischer Wechselwirkungen auf Basis einer Ewald Summation implementiert. Der zeitaufwändigste Teil einer Kraftfeldrechnung stellt die Evaluierung der nichtbin- denden Wechselwirkungen dar. Die Berechnung dieser Wechselwirkungen wurde für die Nutzung von Mehrkernprozessoren optimiert und parallelisiert. Die Parallelisie- rung zeigte eine signifikante Reduktion der benötigten Rechenzeit auf mehreren Re- chenkernen im Vergleich zur seriellen Berechnung auf nur einem Rechenkern für einfa- che Energie- bzw. Gradientenrechnungen sowie für Molekulardynamikrechnungen. Um Rechnungen, die einen cutoff Radius benutzen, weiter zu beschleunigen, wurde der Auf- bau der Verlet-Liste modifiziert. Statt des Standardalgorithmus, der eine Doppelschleife über alle Atome verwendet, wurde ein linked-cell Algorithmus implementiert. Der Auf- bau der Verlet-Liste konnte damit um den Faktor 7 beschleunigt werden. Der Molekulardynamikcode enthält mehrere Algorithmen zur Berechnung von Syste- men in verschiedenen Ensembles. Zur numerischen Integration der Bewegungsgleichun- gen wurden der Velocity-Verlet sowie eine modifizierte Version von Beemans Algorith- mus implementiert. Da der minimale Code, wie er in Kapitel 1.2 beschrieben wird, ein mikrokanonisches Ensemble produziert, und dieses keiner realistischen experimentel- len Situation entspricht, wurden Methoden zur Berechnung und Aufrechterhaltung von Temperatur und Druck implementiert. Die Temperatur kann mittels zweier verschiede- ner Möglichkeiten kontrolliert werden. Die erste Möglichkeit ist die direkte Skalierung der Geschwindigkeiten der Partikel, die zweite Möglichkeit besteht in der Nutzung ei- nes Nòse-Hoover Thermostaten, der ein echtes kanonisches Ensemble generiert. Für die Kontrolle des Drucks wurde ein Berendsen Barostat implementiert. Da die Kontrolle des Drucks die Nutzung von periodischen Randbedingungen voraussetzt, ist die Form der Simulationszelle wichtig. CAST unterstützt aktuell isotrope und anisotrope Simulationszellen, mit der Einschränkung, dass alle Winkel 90◦betragen. Ein kritischer Punkt bei einer MD Simulation ist die Länge des Zeitschritts, der in der Regel bei 1fs liegt. Sollen größere Zeitschritte verwendet werden, müssen die schnell- sten Bewegungnen im System eingeschränkt werden. Dies sind im Normalfall die H-X Streckschwingungen. Zur Einschränkung dieser wurde der RATTLE Algorithmus imple- mentiert der die H-X Bindung mit Hilfe von Lagrange-Multiplikatoren auf den Gleich- gewichtsabstand fixiert. Als erste Anwendung des MD Codes wurde in Kombination mit dem MOPAC Programm die Rigidität und Flexibilität von PBI Seitenketten erfolgreich untersucht. Basierend auf dem MD Code wurden zwei Möglichkeiten zur Bestimmung der freien Energie eingebaut, Umbrella Sampling und Free Energy Perturbation. Umbrella Samp- ling erlaubt die Bestimmung der freien Energie entlang einer Reaktionskoordinate, hier Abstände oder Diederwinkel. Der Algorithmus wurde erfolgreich an zwei Literatur- beispielen, der Streckung von Deca-L-Alanin sowie der Rotation von Butan um den zentralen Diederwinkel getetstet. Die FEP Implementierung wurde an drei Beispielen getestet, einer Nullsummen-Transformation von Ethan in Ethan in explizitem Solvent, dem Lösen eines Natriumions in Wasser und der Transformation von Tyrosin in Alanin in einem Tripeptid. Die Ergebnisse dieser Testrechnungen stimmen hervorragend mit Vergleichsrechnungen mit NAMD sowie Literaturwerten überein. Die FEP Methode wurde schließlich benutzt um die relative freie Bindungsenergie zweier Inhibitoren in einem Inhibitor-Protein-Komplex zu bestimmen. Neben Kraftfeldern können auch ab-initio Methoden für Simulationen benutzt werden. Da die Rechenzeit dieser Methoden um ein vielfaches höher ausfällt als die für Kraftfel- der, ist die Benutzung für die globale Optimierung jedoch limitiert. In den letzten Jah- ren wurde im Bereich der Leistungsfähigkeit dieser Methoden jedoch große Fortschritte erzielt, indem diese Methoden auf Grafikkarten portiert wurden. Um diese Entwick- lung nutzbar zu machen wurde eine MPI-Schnittstelle in CAST implementiert, die mit dem DFT Programm TeraChem kommuniziert. Die Kombination aus beiden Program- men, sowie die Funktionsfähigkeit der Schnittstelle, wurde an H2O10 Clustern sowie dem Polypeptid Met-Enkephalin getestet. Die reinen ab-initio Rechnungen zeigten ein besseres Verhalten gegenüber dem Normalen Protokoll, welches Kraftfeldrechungen mit nachfolgender Optimierung mit qunatenchemischen Methoden vorsieht. KW - Molekulardynamik KW - Molecular dynamics KW - Molecular mechanics KW - Molecular Simulation KW - Free Energy Perturbation (1987 : Princeton, NJ) Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-132032 ER - TY - JOUR A1 - Ojha, Animesh K. A1 - Forster, Stefan A1 - Kumar, Sumeet A1 - Vats, Siddharth A1 - Negi, Sangeeta A1 - Fischer, Ingo T1 - Synthesis of well–dispersed silver nanorods of different aspect ratios and their antimicrobial properties against gram positive and negative bacterial strains JF - Journal of Nanobiotechnology N2 - In the present contribution, we describe the synthesis of highly dispersed silver nanorods (NRs) of different aspect ratios using a chemical route. The shape and size of the synthesized NRs were characterized by Transmission Electron Microscopy (TEM) and UV-visible spectroscopy. Longitudinal and transverse absorptions bands confirm the rod type structure. The experimentally recorded UV-visible spectra of NRs solutions were fitted by using an expression of the extinction coefficient for rod like nano structures under the dipole approximation. Simulated and experimentally observed UV-visible spectra were compared to determine the aspect ratios (R) of NRs. The average values of R for NR1, NR2 and NR3 solutions are estimated to be 3.0 ± 0.1, 1.8 ± 0.1 and 1.2 ± 0.1, respectively. These values are in good agreement with those obtained by TEM micrographs. The silver NRs of known aspect ratios are used to study antimicrobial activities against B. subtilis (gram positive) and E. coli (gram negative) microbes. We observed that the NRs of intermediate aspect ratio (R = 1.8) have greater antimicrobial effect against both, B. subtilis (gram positive) and E. coli (gram negative). The NRs of aspect ratio, R = 3.0 has better antimicrobial activities against gram positive than on the gram negative. KW - antimicrobial activities KW - silver KW - nano rods KW - TEM Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-132222 VL - 11 IS - 42 ER - TY - JOUR A1 - Fischer, Kathrin H. A1 - Hemberger, Patrick A1 - Bodi, Andras A1 - Fischer, Ingo T1 - Photoionisation of the tropyl radical JF - Beilstein Journal of Organic Chemistry N2 - We present a study on the photoionisation of the cycloheptatrienyl (tropyl) radical, \(C_7H_7\), using tunable vacuum ultraviolet synchrotron radiation. Tropyl is generated by flash pyrolysis from bitropyl. Ions and electrons are detected in coincidence, permitting us to record mass-selected photoelectron spectra. The threshold photoelectron spectrum of tropyl, corresponding to the \(X^{+1}A1’ ← X^2E_2”\) transition, reveals an ionisation energy of 6.23 ± 0.02 eV, in good agreement with Rydberg extrapolations, but slightly lower than the value derived from earlier photoelectron spectra. Several vibrations can be resolved and are reassigned to the C–C stretch mode \(ν_{16}^+\) and to a combination of \(ν_{16}^+\) with the ring breathing mode \(ν_2^+\). Above 10.55 eV dissociative photoionisation of tropyl is observed, leading to the formation of \(C_5H_5^+\) and \(C_2H_2\). KW - threshold photoelectron spectroscopy KW - gas phase KW - dissociative photoionisation KW - reactive intermediates KW - synchrotron radiation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-128652 VL - 9 ER - TY - THES A1 - Ansorg, Kay T1 - Development of Accurate Physically Grounded Force Fields for Intermolecular Cation-$\pi$ Interactions based on SAPT Energy Decomposition Analysis and Computational Investigation of Covalent Irreversible Vinyl Sulfone-based Protease Inhibitors T1 - Entwicklung eines akkurat physikalisch basierten Kraftfeldes für Intermolekulare Kation-$\pi$ Wechselwirkungen auf Basis von SAPT Energieanalysen und Untersuchung von kovalent irreversiblem Vinyl Sulfon basierten Protease Inhibitoren N2 - Part 1 of this work describes the development of accurate physically grounded force fields for intermolecular Cation-π interactions based on SAPT energy decomposition analysis. The presented results demonstrate the benefits of the used DFT-SAPT method to describe non-bonding interactions. First of all, this method is able to reproduce the high level CCSD(T) energy values but using much less computational time. Second it provides the possibility to separate the total intermolecular interaction energy into several physically meaningful contributions. The relative contributions of the dimers investigated can be seen in Fig. 6.16. In Tab. 6.3 the percentage contribution of the attractive energy parts to the stabilization energy is shown. The polarization energy is important for the NH+...C6H6 interaction, whereas it becomes less crucial considering other dimers. The dispersion energy contribution is large in the case of the C6H6...H2O dimers, whereas it is relatively less important for the NH+...C6H6 interaction. The electrostatic energy contributes a large amount of stabilizing energy in all considered dimer interactions. ... N2 - In Teil 1 dieser Arbeit wird die Entwicklung eines akkuraten physikalisch fundierten Kraftfeldes für die exakte Beschreibung zwischenmolekularer Cation-π Wechselwir- kungen basierend auf Analysen der SAPT Energieaufspaltungen beschrieben. Die Ergebnisse zeigen die Vorteile der benutzten DFT-SAPT Methode zur Beschreibung von nicht-kovalent gebundenen Wechselwirkungen. Diese Methode ist zum einen in der Lage höchst akkurate CCSD(T) Ergebnisse zu reproduzieren wobei ein sehr viel geringerer computertechnicher Aufwand benötigt wird. Zum anderen ermöglicht es diese Methode die gesamte Wechselwirkungsenergie in einzelne physikalisch sinn- volle Komponenten zu separieren. In Abb. 6.17 sind die Energiekomponenten der untersuchten Dimere graphisch dargestellt. In Tab. 6.4 sind die Anteile der attrak- tiven Energiebeiträge zur Gesamtstabilisierungsenergie prozentual aufgelistet. Die Polarisationsenergie repräsentiert einen entscheidenden Anteil an der NH+...C6H6 Wechselwirkung, wobei diese für die weiteren hier gezeigten Dimere keine entschei- dende Rolle spielt. Die Dispersionsenergie hingegen liefert einen großen Beitrag zur C6H6...H2O Wechselwirkung, ist aber für die NH+...C6H6 Wechselwirkung rela- tiv unbedeutend. Die Elektrostatische Energie liefert in allen untersuchten Dimeren einen entscheidenden Anteil zur Stabilisierungsenergie. ... KW - Kraftfeld KW - Proteaseinhibitor KW - SAPT KW - Force Field KW - Computational Investigation KW - Kraftfeld KW - Theoretische Chemie KW - Theoretische Chemie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131084 ER - TY - JOUR A1 - Brixner, T. A1 - Aeschlimann, M. A1 - Fischer, A. A1 - Geisler, P. A1 - Goetz, S. A1 - Hecht, B. A1 - Huang, J. S. A1 - Keitzl, T. A1 - Kramer, C. A1 - Melchior, P. A1 - Pfeiffer, W. A1 - Razinskas, G. A1 - Rewitz, C. A1 - Schneider, C. A1 - Strüber, C. A1 - Tuchscherer, P. A1 - Voronine, D. V. T1 - Coherent spectroscopies on ultrashort time and length scales JF - EPJ Web of Conferences N2 - Three spectroscopic techniques are presented that provide simultaneous spatial and temporal resolution: modified confocal microscopy with heterodyne detection, space-time-resolved spectroscopy using coherent control concepts, and coherent two-dimensional nano-spectroscopy. Latest experimental results are discussed. KW - coherent spectroscopy KW - ultrashort time KW - length scale Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129073 VL - 41 ER - TY - THES A1 - Andrei, Horia-Sorin T1 - Infrared photodissociation spectroscopy of ionic hydrocarbons : microsolvation and protonation sites T1 - Infrarot Photodissoziation Spektroskopie der ionisierten Kohlenwasserstoffen: Mikrosolvatations- und Protonierungsstellen N2 - This work has presented a spectroscopic analysis of three types of hydrocarbon cations: two ionized aromatic hydrocarbons, two protonated aromatic hydrocarbons and the cation of a fundamental radical hydrocarbon. The experiments were centered on the proton stretch vibrations of mass-selected complexes of these systems and polar (H2O) and non polar (Ar, N2, CO2) ligands. The experiments have been done in a tandem mass spectrometer coupled with an electron impact ionization ion source; an OPO laser system was used as tunable IR light source. All the proposed dimer structures have been also modeled using quantum chemical calculations (QCC). These calculations have consistently been matched with the experimental results and have enabled clear identification of the spectral features observed. This has enabled the evaluation of thermochemical properties which could not be extracted directly from experiment. The experiments done on complexes of 1-Np+ and Im+ have allowed for the acidity of their various groups to be probed: the shifts in the frequency as well as the enhancement in the intensity of the OH and NH stretch vibrations resulting from the complexation have yielded dependences on both the species (L) and the number (n) of the ligands. OH bound 1-Np+···Ar has been detected for the first time, showing that the REMPI-IRPD method is severely limited with respect to the production of the most stable isomer of a given cationic complex. The detection of c-1-Np+···(N2)n corresponds to the first observation of c-1-Np+ complexes and enables thus direct comparison of both 1-Np+ rotamers. The shift of the NH vibration of Im+···N2(H) yielded the first experimental estimate for the PA of the imidazyl radical. It was also found that the most stable 1-Np+···Ar and Im+···Ar structures differ qualitatively from that of the corresponding neutral dimers (H-bound vs pi-bound), emphasizing the large impact of ionization on the interaction potential and the preferred recognition motif between acidic aromatic molecules (A) and nonpolar ligands. The IRPD spectra of 1-Np+···Ln and Im+···Ln yielded spectroscopic information about the CH, NH and OH stretch vibrations of bare 1-Np+ and Im+. The dependence of the shifts in the frequency of the OH and NH stretch vibrations allows for creating microsolvation models. The spectroscopic results obtained on size-selected 1-NpH+···Ln show that, in the output of the presently used ion source, three classes of 1-NpH+ isomers can be identified: oxonium ions (1-Np protonated at the O atom); carbenium ions obtained by protonation in the para and ortho positions with respect to the OH functional group; carbenium ions obtained by the addition of a proton to well-defined sites on the second naphthalene ring. The spectral identification of these three classes of protonation sites is supported by their different photofragmentation patterns. It was demonstrated that the spectroscopic monitoring of the microsolvation of ImH+ in Ar and N2 together with the QCCs paint a very detailed picture of the microsolvation process, evidencing clear differences between the microsolvation models as function of the PA of the ligands. Important differences have also been identified between the various binding sites, enabling the creation of a clear scale of priorities for occupation of the binding sites during microsolvation. The application of IRPD to the study of microhydrated ImH+ provided for the first time direct spectroscopic information on the properties of the N-H bonds of this biomolecular building block under controlled microhydration. It was demonstrated that, as protonation enhances the acidity of the NH groups, the ability for proton conductivity of ImH+ increases. A very important result is derived from the IRPD spectroscopy of C2H5+···L (L = Ar, N2, CO2, CH4) dimers. The equilibrium geometry of the C2H5+ has long been debated. Now, IRPD spectra were recorded over the range of the CH stretch fundamentals (covering possible sp3 and sp2 hybridization of C). Depending on the ligand species, the spectra are found to be dominated by the fingerprint of two largely different dimer geometries. Using the experimental C2H5+···Ar spectrum and the corresponding QCCs, the structure of the (weakly perturbed) C2H5+ was found to be the nonclassical one, with one proton straddling across the C=C bond of the H2C=CH2. On the other hand, ligands like N2 and CH4 are strongly influencing the geometry, as seen in the spectral signatures of the C2H5+···N2 and C2H5+···CH4, which correspond to the classical [H2CCH3]+. It was thus demonstrated that while the nonclassical C2H5+ is the global minimum on the PES of the free [C2,H5]+, the structure of the C2H5+ can be strongly influenced by the chemical properties of the environment. N2 - Gegenstand dieser Arbeit ist die Spektralanalyse von drei Arten von Kohlenwasserstoffkationen: zwei ionisierten aromatische Kohlenwasserstoffen (1-Np+, Im+), zwei protonierten aromatischen Kohlenwasserstoffen (1-NpH+, ImH+) und vom eines Radikal-Kohlenwasserstoff-Kation (C2H5+). Die experimentellen Untersuchungen wurden auf die Proton-Streckschwingungen der massenselektierten Komplexe dieser Systeme mit angehängtem polaren (H2O) und unpolaren (Ar, N2, CO2) Liganden fokussiert. Die experimentellen Resultate wurden in einem Tandem-Massenspektrometer, das mit einer Elektronstoßionisationsquelle verbunden ist, erzielt. Als abstimmbare IR-Lichtquelle wurde ein OPO-Laser-System benutzt. Alle vorgeschlagenen Dimerstrukturen sind auch mit Quantenchemieberechnungen modelliert worden. Diese Berechnungen stimmen mit den experimentellen Ergebnisse überein und haben die eindeutige Identifizierung der beobachteten Schwingungsstrukturen erlaubt. Die Übereinstimmung mit den experimentellen Resultaten ermöglichte auch die Auswertung der thermochemischen Eigenschaften, die nicht direkt aus dem Experiment zugänglich waren. Die Experimente, die an Komplexen der ionisierten Kohlenwasserstoffe durchgeführt wurden (1-Np+ und Im+), haben die Untersuchung der Azidität der verschiedenen Gruppen (CH, NH, OH) erlaubt. Frequenzverschiebung sowie die Erhöhung der Intensität der OH- und der NH-Streckschwingungen, als Folge der Komplexbildung hängen sowohl von der Sorte (L) und der Zahl (n) der Liganden ab. Zum ersten Mal wurde das OH gebundene 1-Np+···Ar detektiert. Es wurde auch gefunden, dass die stabilsten 1-Np+···Ar und Im+···Ar Strukturen (H-gebundene Isomere) sich qualitativ vom entsprechenden neutralen Dimer (pi-gebundene Struktur) unterscheiden. Dies zeigt den großen Einfluss der Ionisierung auf das Wechselwirkungspotential und das bevorzugte Erkennungsmotiv zwischen sauren aromatischen Molekülen (A) und nichtpolaren Liganden. Die IRPD-Spektren von 1-Np+···Ln und Im+···Ln erbrachten spektralanalytische Hinweise über die CH-, NH- und OH- Streckschwingungen des isolierten 1-Np+ und Im+. Die Frequenzverschiebungsabhängigkeit der OH- und NH-Streckschwingungen konnte zur Aufstellung von Microsolvationsmodellen genutzt werden. Die spektralanalytischen Resultate an größenselektierten 1-NpH+···Ln-Kationen zeigen dass, mit der hier verwendeten Ionenquelle, drei 1-NpH+-Isomere entstehen: Oxonium-Ionen (1-Np protoniert am O Atom); Carbenium-Ionen, die durch Protonierung in para- und ortho-Position bezüglich der OH-Gruppe und Carbenium-Ionen, die durch die Protonierung an einer definierten Position am zweiten Naphthalinring gebildet werden. Die spektrale Identifizierung dieser drei Kategorien von Protonierungsstellen wird durch ihre unterschiedlichen Photofragmentationsmuster gestützt. Es wurde gezeigt, dass die spektralanalytische "Abfrage" der Mikrosolvatation von ImH+ in Ar und N2 zusammen mit den Quantenchemischen Berechnungen ein sehr detailliertes Bild des Solvatationsprozesses beschreibt und belegt deutliche Unterschiede zwischen Mikrosolvationsmodellen als Funktion der PA der Liganden. Wichtige Unterschiede sind auch zwischen den verschiedenen Bindungsstellen identifiziert worden unter Ermöglichung der Schaffung einer klaren Prioritäten-Skala für die Besetzung der Bindungsposition während der Mikrosolvatation. Die Anwendung von IRPD zur Studie von mikrohydratisiertem ImH+ verschafft zum ersten Mal direkte spektralanalytische Informationen über die Eigenschaften der NH Bindungen dieses biomolekularen Bausteins unter kontrollierter Mikrohydratisierung. Es wurde gezeigt, dass, mit der Protonierung die Azidität der NH Gruppen erhöht wird und damit die Fähigkeit für die Protonleitfähigkeit in ImH+ steigt. Ein sehr wichtiges Resultat wird von der IRPD-Spektroskopie des Dimers C2H5+···L, mit L = Ar, N2, CO2, CH4 abgeleitet. Die Gleichgewichtgeometrie des Ethylkations ist lange Zeit diskutiert worden. Jetzt wurden IRPD-Spektren über den Bereich der C-H-Streckschwingungen aufgenommen (Abdeckung sp3 und sp2 Hybridisierung von C). Abhängig von der Ligandenart wurde gefunden, dass die Spektren durch den Fingerabdruck von zwei sehr unterschiedlichen Dimergeometrien dominiert werden. Mit dem experimentellen C2H5+···Ar Spektrum und den entsprechenden quantenchemischen Berechnungen konnte bewiesen werden, dass das schwach gestörte C2H5+ in der nicht-klassischen H-überbrückten Struktur vorliegt. Andererseits beeinflussen Liganden wie N2 stark die Geometrie, wie die spektralen Signaturen des C2H5+···N2 zeigen, die dem klassischen [H2CCH3]+ entsprechen. Es wurde auch gezeigt, dass während das nicht-klassische C2H5+ das globale Minimum auf der PES vom freien [C2,H5]+ repräsentiert, die tatsächliche Struktur des C2H5+ durch die chemischen Eigenschaften des Umgebung stark beeinflußt werden kann. KW - Infrarot KW - Photodissoziation KW - Spektroskopie KW - Kohlenwasserstoffen KW - Mikrosolvatation KW - Protonierung KW - photodissociation KW - spectroscopy KW - hydrocarbon KW - microsolvation KW - protonation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24652 ER - TY - THES A1 - Hain, Tilman Christian T1 - Entwicklung eines experimentellen Aufbaus zur Charakterisierung nanoskaliger Systeme mittels Fluoreszenzspektroskopie und -mikroskopie T1 - Development of an experimental setup for characterizing nanoscopic matter by means of fluorescence spectroscopy and fluorescence microscopy N2 - Die vorliegende Dissertation leistet einen Beitrag zur spektroskopischen Messmethodik nanoskaliger Strukturen. Im Mittelpunkt der Arbeit steht die Entwicklung und Erprobung eines spektrofluorimetrischen Aufbaus, mit dessen Hilfe ein aus Kohlenstoffnanoröhren und DNA-Oligomeren bestehendes supramolekulares Modellsystem einer optischen Untersuchung zugänglich gemacht wird. Die Vielseitigkeit der Messeinheit aus Mikroskop und Spektrometer wird an einer weiteren Substanzklasse untermauert. So wird das Emissionsverhalten von in Siliziumcarbidkristallen induzierten Defektzentren einer räumlich, spektral und zeitlich aufgelösten Charakterisierung unterzogen. Die zentrale Komponente des Spektrofluorimetrieaufbaus stellt eine Superkontinuumlichtquelle dar. In Verbindung mit einem elektronisch geregelten Filtermodul zur Wellenlängenselektion erlaubt sie die Durchführung von Photolumineszenz-Anregungsexperimenten. Im Gegensatz zu kommerziell erhältlichen Systemen, die überwiegend auf eine spektroskopische Charakterisierung gelöster oder kolloidal stabilisierter Substanzen abzielen, erlaubt der hier realisierte Aufbau auch die PL- mikroskopische Untersuchung kondensierter Proben, was durch die Epi-Bauweise auch opake Substrate einschließt. Der Einsatz von InGaAs-Sensoren weitet das Detektionsfenster auf den Nahinfrarotbereich aus, sowohl hinsichtlich des Kamera- als auch des Spektroskopiekanals. Anhand verschiedenartiger Kohlenstoffnanorohrproben, die entweder in flüssiger Phase dispergiert oder in festem Zustand als Film abgeschieden vorliegen, wird die Leistungsfähigkeit des PLE-Experiments unter Beweis gestellt. Neben der Zuordnung der Chiralitäten in polydispersen SWNT-Suspensionen wird dies auch durch die Untersuchung von Energietransferprozessen und die Studie von Umgebungseinflüssen demonstriert. Die Charakterisierung des DNA-SWNT-Modellsystems in mikrofluidischer Umgebung macht von der fluoreszenzmikroskopischen Detektionseinheit Gebrauch. Während die intrinsische Photolumineszenz der Nanoröhren sicherstellen soll, dass Letztere in ausreichender Anzahl auf den mikrostrukturierten Substraten vorhanden sind, wird die extrinsische Photolumineszenz der funktionalisierten Oligonukleotide als spektroskopisches Maß für die DNA-Konzentration herangezogen. Das hierbei beobachtete Agglomerationsverhalten der farbstoffmarkierten Oligomere geht mit einer lokal erhöhten Fluoreszenzintensität einher und erlaubt damit die quantitative Auswertung der auf PL-Einzelbildern basierenden Zeitserien. Zugleich wird damit eine Abschätzung der DNA-Belegung auf den Nanoröhren möglich. Im Falle der aus 16 alternierenden Guanin-Thymin-Einheiten bestehenden Basensequenz lösen sich nach Initiieren des Desorptionsvorgangs ein Großteil der Oligomere von der Nanorohroberfläche ab. Lediglich ein Fünftel bleibt in adsorbierter Form zurück, was sich jedoch für die Hybridstabilität als ausreichend erweist. Die Freisetzung weiterer Oligomere bleibt bei der Versuchstemperatur von 20 °C trotz der hohen Verdünnung aus, da aufgrund des größeren Interadsorbatabstands und der damit verbundenen Abnahme repulsiver Wechselwirkungen die Aktivierungsbarriere für ihre Desorption steigt. Die Stabilität der DNA-SWNT-Konjugate liegt demnach in ihrer kinetischen Inertheit begründet, die sie vor einer Reaggregation bewahrt. Die Studie der in Siliziumcarbid induzierten Fehlstellendefekte kann als Beleg für die breite Anwendbarkeit des spektrofluorimetrischen Aufbaus gelten. PL-Mikroskopaufnahmen zeigen hierbei, dass die Anzahl der Defektzentren mit der Bestrahlungsintensität kontrolliert werden kann – von einer kontinuierlichen Verteilung bei hohen Strahlungsintensitäten über heterogene Defektansammlungen bis hin zu Einzeldefektstellen bei niedrigen Strahlungsdosen. Letztere resultieren in beugungsbegrenzten Signaturen und erlauben damit eine Charakterisierung des abbildenden Systems sowie des Anregungsfokus. Anhand der PLE-Analyse lässt sich das Absorptionsmaximum abschätzen. Aussagen zur zeitlichen Entwicklung des Emissionsverhaltens werden durch TCSPC-Messungen erhalten. Die abschließende Untersuchung des Photonenflusses mit Hilfe von Korrelationsexperimenten nach Hanbury Brown-Twiss zeigt bei Raumtemperatur kein Auftreten von Photonantibunching. N2 - Within the scope of this dissertation, a contribution towards the spectroscopic investigation of nanomaterials has been made. The approach applied here is a spectrofluorometric one, which allows the optical characterization of an oligonucleotide/single-wall carbon nanotube comprised supramolecular model system. The flexibility of the developed setup is demonstrated by studying another class of nanoscale samples, that is defect centers in silicon carbide crystals. Their emission behavior is subject to a spacial, spectral and temporal analysis. The key role in the combined microscope and spectrograph assembly is held by a supercontinuum light source. With the help of this device, excitation measurements can be conducted by shifting the wavelength with an electronically driven filter accessory. In contrast to commercially available systems, which predominantly focus on a spectroscopic characterization of substances in solution or in colloidal suspension, it is also possible to carry out PL microscopic studies of condensed matter. Because of an epifluorescence configuration, the samples to be measured imply opaque substrates as well. Using complementary sensor materials including InGaAs arrays enlarges the accessible range of emission for both imaging and spectroscopy. Differently processed carbon nanotube samples, occurring in either dispersed or deposited form, serve as a benchmark in assessing the capability of the PLE setup established here. For instance, it can be used to assign chiralities in heterogeneous SWNT suspensions or to analyze energy transfer as well as the impact of varying colloidal conditions. The studies of the DNA-SWNT model system are accomplished through the use of fluorescence microscopy under microfluidic control. The intrinsic photoluminescence of carbon nanotubes can be exploited to estimate, to what extent they cover the lithographically treated silicon wafers. The extrinsic photoluminescence of functionalized oligonucleotides is used as a spectroscopic probe for DNA concentration measurements. Bright spots with distinct shape are observed and attributed to an agglomeration of dye-labeled oligomers. By recording time series of PL images, the locally enhanced emission signal in these discrete sites can be quantitatively analyzed, representing the progress of DNA adsorption on SWNTs. Based on a DNA sequence consisting of 16 alternating guanine-thymine moieties, the present experiments reveal the release of most of the oligonucleotides, when starting off the desorption process. Only one fifth of the initially adsorbed amount remains attached to the nanotube surface, without the modified environment affecting hybrid stability. Remarkably, an ongoing desorption does not take place at the test temperature of 20 °C in spite of the vast dilution applied. This circumstance can be explained by an increased distance between the residually adsorbed oligonucleotides, resulting in less pronounced repulsive forces between them. Consequently, the activation energy barrier for inducing further detachment is raised. In case of sufficiently long base compositions, this suggests that the stability of conjugates is founded in their kinetic inertness. The absence of continued desorption eventually prevents these DNA-SWNT hybrids from reaggregating. The investigation of vacancy defects in silicon carbide proves the broad applicability of the spectrofluorimetric setup. PL microscopic studies show that the amount of defect sites can be controlled by tuning electron irradiance. The corresponding defect pattern evolves from a continuous distribution towards discrete clusters. By lowering the exposure dose even more, single defects emerge showing diffraction-limited signatures, which can help to elucidate the imaging system as well as the excitation focus in more detail. PLE mapping and time-correlated single photon counting of the fluorescence decay provide insight in photophysical parameters, including the absorption maxium and the lifetime of the excited state. Studying the photon flux by means of correlation measurements according to Hanbury Brown-Twiss does not give rise to photon antibunching under ambient conditions. KW - Fluoreszenzspektroskopie KW - Fluoreszenzmikroskopie KW - Kohlenstoff-Nanoröhre KW - Oligonucleotide KW - Siliciumcarbid KW - PLE-Spektroskopie KW - DNA-SWNT-Konjugate KW - Sorptionsstudien KW - SiC-Fehlstellendefekte KW - Korrelationsfunktion zweiter Ordnung KW - PLE spectroscopy KW - DNA-SWNT hybrids KW - sorption studies KW - SiC vacancy defects KW - second-order correlation function Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-116618 ER - TY - THES A1 - Hartleb, Holger Edgar Heinz Erich T1 - Spektroelektrochemische Untersuchung von halbleitenden Kohlenstoffnanoröhren T1 - Spectroelectrochemical investigation of semiconducting carbon nanotubes N2 - Der Schwerpunkt dieser Arbeit lag auf der spektroelektrochemischen Untersuchung von halbleitenden SWNTs. Hierbei wurden erstmalig Absorptions- und Photolumineszenzspektren ein und derselben SWNT-Probe simultan unter elektrochemischer Potentialkontrolle aufgenommen. Hierbei konnte gezeigt werden, dass die Messmethode einen entscheidenden Einfluss auf die erhaltene Bandlücke besitzt und der in der Literatur geprägte Begriff der Elektrochemischen Bandlücke aufgrund einer fehlenden allgemeingültigen Definition problembehaftet ist. So ergeben Photolumineszenzmessungen im Vergleich zu Raman- oder Absorptionsmessungen die kleinste Bandlücke. Dies wurde auf die diffusionskontrollierte Löschung der Exzitonen an Ladungszentren zurückgeführt. Weiterhin wurden die optischen Spektren von SWNTs unter Ladungseinfluss analysiert und die zugrundeliegenden Änderungen der elektronischen Eigenschaften diskutiert. Neben SWNTs wurden die Übergangsmetalldichalkogenide MoS2 und WS2 spektroelektrochemisch untersucht. Auffallend im Vergleich zu den Messungen an SWNTs war der breite Potentialbereich, über den die Abnahme der exzitonischen Signale zu beobachten war. Dies kann auf die unterschiedliche elektronische Struktur von TMDs und SWNTs und den geringen Anteil von Einzellagen in den TMD-Proben zurückgeführt werden. Weiterhin konnte in den Absorptionsspektren unter Ladungseinfluss ein Signal beobachtet werden, welches auf die Entstehung von Trionen hindeutet. In einem weiteren Teilprojekt wurde eine elektrochemische Zelle zur Untersuchung von metallischen SWNT-Filmen als Elektrode für die Wasserstoffproduktion entwickelt und getestet. Hierbei gelang es die von Das et al. publizierte Aktivierung von SWNTs mit Schwefelsäure erfolgreich nachzuvollziehen und einen katalytischen Effekt der SWNTs auf die Wasserstoffentwicklung zu beobachten. N2 - The main focus of this work was on spectroelectrochemical studies of semiconducting SWNTs. For the first time, absorption and photoluminescence spectra of one and the same sample were recorded simultaneous under electrochemical control of the potential. It was shown, that the optical method has a significant influence on the resulting band gap. Therefore, the term electrochemical band gap, which has developed in literature, is problematic due to a missing general definition. Photoluminescence measurements yield the smallest band gap in comparison to Raman or absorption measurements. This was attributed to the diffusion limited quenching of excitons at charges. Furthermore, the optical spectra of charged SWNTs were analysed and the underlying electronic changes were discussed. In addition to SWNTs, the transition metal dichalcogenides MoS2 and WS2 were studied with spectroelectrochemical methods as well. Striking, when compared to the measurements of SWNTs, was the broad potential range during which the decrease of the excitonic signals could be observed. This can be attributed to the different electronic structures of TMDs and SWNTs and the small amount of mono layers in the TMD samples. Under the influence of charges it was furthermore possible to observe a signal in the absorption spectra, which points to the formation of trions. In the last part of this work an electrochemical cell for the investigation of hydrogen production at metallic SWNT electrodes was developed and tested. The activation procedure of SWNTs with sulphuric acid, which was published by Das et al., was successfully reproduced, and a catalytic effect on the hydrogen production by the SWNTs was observed. KW - Kohlenstoff-Nanoröhre KW - Photolumineszenzspektroskopie KW - Absorptionsspektroskopie KW - Spektroelektrochemie KW - Übergangsmetalldichalkogenide KW - Elektrolyse KW - elektrochemische Bandlücke Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-116628 ER - TY - THES A1 - Mann, Christoph T1 - Exzitonengröße und -dynamik in (6,5)-Kohlenstoffnanoröhren : Transiente Absorptions- und Photolumineszenzmessungen T1 - Exciton size and -dynamics in (6,5) carbon nanotubes N2 - Zahlreiche theoretische und experimentelle Untersuchungen haben erwiesen, dass in halbleitenden Kohlenstoffnanoröhren durch Absorption von Licht hauptsächlich Exzitonen erzeugt werden. Die photophysikalischen Eigenschaften und insbesondere die Prozesse nach der optischen Anregung sind aber gegenwärtig noch nicht vollständig verstanden. Zeitaufgelöste Spektroskopie bietet die Möglichkeit, diese Prozesse zu verfolgen und somit detaillierten Einblick in das photophysikalische Verhalten von Kohlenstoffnanoröhren zu nehmen. Hierbei scheinen auch extrinsische Faktoren - zu nennen sind die Herstellungsmethode, die Art der Probenpräparation, der Aggregationsgrad sowie der durch das Lösungs- bzw. Dispersionsmittel bedingte Einfluss - eine entscheidende Rolle zu spielen. In dieser Dissertation wurden die Exzitonengröße sowie die exzitonische Dynamik in einwandigen Kohlenstoffnanoröhren mittels transienter Absorptionsspektroskopie sowie stationärer und zeitaufgelöster Photolumineszenzmessungen untersucht. Alle Experimente fanden dabei an halbleitenden (6,5)-Kohlenstoffnanoröhren statt, deren chirale Anreicherung durch Dichtegradientenultrazentrifugation gelang. Für die temperaturabhängigen Messungen wurde ein Verfahren zur Herstellung von tensidstabilisierten Gelatinefilmen entwickelt. Diese zeichnen sich durch eine hohe Temperaturstabilität bei gleichzeitiger Minimierung von Streulichteffekten aus. Die Bestimmung der Exzitonengröße erfolgte mit Hilfe des Phasenraumfüllmodells, das die intensitätsabhängige Änderung der Oszillatorstärke eines Übergangs mit der Exzitonengröße verknüpft. Hierfür wurden leistungsabhängige Messungen der transienten Absorption durchgeführt und die Signalintensität des Photobleichens gegen die absorbierte Photonenflussdichte aufgetragen. Da diese beiden Größen nur bei geringer Exzitonendichte in einer linearen Beziehung stehen, aus der sich die Exzitonengröße berechnen lässt, wurde im Experiment besonderer Wert auf niedrige Anregungsfluenzen und deren exakte Bestimmung gelegt. Um den Einfluss der Aggregation quantifizieren zu können und den Vergleich mit der Literatur zu erleichtern, fanden die Untersuchungen sowohl an individualisierten als auch an aggregierten Röhrenproben statt. Die Datenanalyse, bei der erstmalig die stimulierte Emission sowie der spektrale Überlapp von Photoabsorptions- und Photobleichbande Berücksichtigung fanden, ergab für individualisierte (6,5)-Nanoröhren einen Wert von 12.0 nm für die Größe des S1-Exzitons, während diese bei der aggregierten Röhrenprobe nur 5.6 nm beträgt. Die Probenabhängigkeit der Exzitonengröße macht den Vergleich mit anderen experimentell ermittelten Werten schwierig. Diese liegen fast ausschließlich zwischen 1 nm und 4.5 nm, ihre Bestimmung fand aber teilweise an stark aggregierten bzw. polydispersen Proben statt. Theoretische Berechnungen liefern für die Exzitonengröße Werte zwischen 1 nm und 4 nm. Zwar gelten einige der Berechnungen für Vakuum, was verglichen zu einer experimentell in Lösung bzw. im Film bestimmten Exzitonengröße einen kleineren Wert mit sich bringt, jedoch kann allein hierdurch die Diskrepanz zu der in dieser Arbeit ermittelten Exzitonengröße von 12.0 nm nicht erklärt werden. Setzt man experimentell und theoretisch für Vakuum bestimmte Werte für die Exzitonengröße und die Bindungsenergie in einen einfachen Zusammenhang, entspricht eine Exzitonengröße von 12.0 nm einer Bindungsenergie zwischen 0.21 eV und 0.27 eV. Die mittels Zweiphotonenexperimenten ermittelten Werte für die Bindungsenergie von (6,5)-Kohlenstoffnanoröhren befinden sich zwischen 0.37 eV und 0.42 eV; diese wurden allerdings unter Zuhilfenahme eines vereinfachten zylindrischen Modells abgeschätzt. Weitere experimentelle und theoretische Untersuchungen könnten klären, inwieweit eine exzitonische Bindungsenergie zwischen 0.21 eV und 0.27 eV für (6,5)-SWNTs in Betracht kommt. Strahlender und nichtstrahlender Zerfall in den Grundzustand scheinen in (6,5)-Kohlenstoffnanoröhren durch eine Dynamik zwischen verschiedenen Zuständen sowie durch die Diffusion der Exzitonen beeinflusst zu werden. Um diese für die Rekombination maßgeblichen Prozesse besser zu verstehen, wurden temperaturabhängige Messungen der stationären und zeitaufgelösten Photolumineszenz sowie der transienten Absorption durchgeführt. Die Ergebnisse der stationären PL-Experimente deuten darauf hin, dass die Exzitonen zwischen dem optisch aktiven Singulettzustand mit A2-Symmetrie - im Folgenden mit [B] bezeichnet - und einem energetisch tiefer liegenden dunklen Zustand [D] gestreut werden. Mit einem Wert von 5 meV für die energetische Aufspaltung zwischen [B] und [D] gelingt eine gute Anpassung an die Daten, was mit Blick auf die Bandstruktur von (6,5)-SWNTs vermuten lässt, dass es sich bei [D] um den A1-Singulettzustand handelt. Außerdem scheint eine nichtthermische Verteilung der Exzitonen auf [B] und [D] vorzuliegen, wobei strahlende Rekombination nur vom Zustand [B] aus möglich ist. Mit diesen Annahmen kann das temperaturabhängige Verhalten der stationären Photolumineszenz modelliert werden, die Ergebnisse der zeitaufgelösten PL-Messungen jedoch nicht. Mit einem rein diffusionsdominierten Modell gelingt dies ebenso wenig, so dass zur Interpretation des PL-Zerfalls vermutlich ein Modell entwickelt werden muss, in dem sowohl die Streuung der Exzitonen zwischen [B] und [D] als auch das durch Diffusion bedingte Löschen an Defektstellen oder Röhrenenden Berücksichtigung findet. Die Bedeutung der Diffusion von Exzitonen zu Defektstellen oder Röhrenenden, an denen bevorzugt nichtstrahlender Zerfall stattfindet, kann durch spektral- und zeitaufgelöste PL-Messungen belegt werden. Abhängig von der zur Verfügung stehenden thermischen Energie und der Höhe der Potenzialbarrieren des untersuchten Systems kann die Diffusion niederenergetischer Exzitonen, die sich in Potenzialminima befinden, soweit eingeschränkt werden, dass diese eine fast bis um den Faktor zwei längere PL-Lebensdauer aufweisen als höherenergetische Exzitonen. Das unterschiedliche Verhalten von transienter Absorption und zeitaufgelöster Photolumineszenz bei Temperaturen zwischen 14 K und 35 K zeigt, dass die Repopulation des Grundzustands hauptsächlich von einem anderen Zustand aus erfolgt als die strahlende Rekombination. Ob es sich hierbei aber um den mit [D] bezeichneten A1-Singulettzustand oder einen anderen dunklen Zustand handelt, kann nicht abschließend geklärt werden. Aufgrund inhomogener Verbreiterung stellt die Halbwertsbreite der Banden im Absorptionsspektrum ein Maß für die Höhe der Potenzialbarrieren bzw. für die energetische Verteilung der Exzitonen im angeregten Zustand dar. In dieser Arbeit wurde anhand vier verschiedener Nanorohrsuspensionen gezeigt, dass Sättigungsverhalten der transienten Absorption von (6,5)-Kohlenstoffnanoröhren und Bandenbreite im Absorptionsspektrum demselben Trend folgen. Begründen kann man dies damit, dass das Sättigungsverhalten der transienten Absorption durch Exziton-Exziton-Annihilation bestimmt wird. Aufgrund ihrer eindimensionalen Struktur unterliegen Kohlenstoffnanoröhren einer starken Beeinflussung durch die Umgebung. Abhängig vom Lösungs- bzw. Dispersionsmittel resultiert eine unterschiedliche inhomogene Verbreiterung der Absorptionsbanden und damit unterschiedlich hohe Potenzialbarrieren im angeregten Zustand. Niedrige Potenzialbarrieren erlauben eine weitreichende Diffusion der Exzitonen, sodass effiziente Exziton-Exziton-Annihilation schon bei einer vergleichsweise geringen Exzitonendichte stattfindet und das Signal der transienten Absorption bei einer niedrigen Impulsfluenz sättigt. N2 - Numerous theoretical and experimental studies have proved that in semiconducting carbon nanotubes, mainly excitons are created by light absorption. The photophysical properties and in particular the processes after optical excitation are to date not fully understood. Thanks to time-resolved spectroscopy, these processes can be pursued gaining detailed insight into the photophysical behavior of carbon nanotubes. Extrinsic factors like synthesis and preparation method, degree of aggregation as well as environmental effects appear to play a major role in this content. In this work, exciton size and dynamics in single-wall carbon nanotubes were studied by transient absorption spectroscopy as well as steady-state and time-resolved photoluminescence experiments. All measurements were done with semiconducting nanotubes of the (6,5)-chirality, which were obtained by density gradient ultracentrifugation. For temperature dependent measurements, an optimised surfactant stabilised gelatine film was developed which has a high temperature stability while minimising scattered light effects. The exciton size was determined by phase space filling analysis, which relates the intensity dependent reduction in oscillator strength of a transition with the size of the corresponding exciton. Therefore, the transient absorption was measured as a function of the power, and the intensity of the photobleach signal was plotted against the number of absorbed photons. The exciton size was calculated from the linear relationship between these two quantities at low exciton densities. Hence, great emphasis was put on working with high precision at low excitation fluences. In order to quantify the influence of the aggregation and in order to facilitate the comparison with literature, both individualised and aggregated nanotube samples were used in the experiments. From the data, the first subband exciton size was determined to be 12.0 nm and 5.6 nm for the individualised and the aggregated (6,5)-sample, respectively. Here, for the first time, both the stimulated emission and the spectral overlap of the photoabsorption and photobleach signal were taken into account. Thus, the exciton size strongly depends on the sample. This makes it difficult to compare the results with experimental values as shown in literature which almost exclusively lie between 1.0 nm and 4.5 nm but were partially determined using aggregated and polydisperse samples. Theory predicts an exciton size between 1 nm and 4 nm. In fact, some of these theoretical values were obtained for vacuum conditions leading to a smaller exciton size compared to experimental determination. However, the discrepance from the exciton size determined in this work can not be explained purely by this effect itself. Relating experimental and theoretical values of the exciton size and binding energy, an exciton size of 12.0 nm corresponds to a binding energy between 0.21 eV and 0.27 eV. Two-photon absorption experiments yield an exciton binding energy between 0.37 eV and 0.42 eV using a simplified cylindrical model. Further experimental and theoretical studies might clarify if an exciton binding energy between 0.21 eV and 0.27 eV is a realistic approach. In (6,5) carbon nanotubes, both radiative and nonradiative decay to the ground state appear to be influenced by multiple excitonic states as well as exciton diffusion. To better understand the relevant recombination processes, the stationary and time-resolved photoluminescence as well as the transient absorption was measured as a function of temperature. The stationary PL experiments suggest an exciton scattering between the optically active singlet state with A2 symmetry (hereinafter referred to as [B]) and a lower lying dark state [D]. Neglecting radiative recombination from [D], the data is well-explained by a dark-bright excitonic splitting of 5 meV and a nonthermal exciton distribution. With regard to the band structure of (6,5) carbon nanotubes, this gives rise to the presumption that [D] is the dipole forbidden A1 singlet state. This assumption explains the temperature dependent behaviour of the stationary photoluminescence quite well, but not the behaviour of the time-resolved photoluminescence. A model that is dominated solely by diffusion does not work either. Therefore, to interpret the PL decay, both exciton scattering between [B] and [D] and diffusion limited quenching at defects or tube ends have to be taken into account. The importance of exciton diffusion to defects or tube ends where non-radiative decay preferentially takes place can be proved by spectral- and time-resolved PL measurements. Depending on the available thermal energy and the height of the potential barriers in the considered system, diffusion can be restricted in that way that low energy excitons which are located in minimums of the potential energy landscape exhibit an almost twice longer PL lifetime than high energy excitons. The differences in transient absorption and time-resolved PL between 14 K and 35 K demonstrate that recovery to the ground state occurs from another state, different from the state [B] in radiative recombination. The nature of this dark state remains unclear. Due to inhomogeneous broadening, the FWHM of the absorption bands is a measurement of the height of the potential barriers and of the energetic exciton distribution in the excited state. In this work, the fact that transient absorption saturation behaviour of (6,5) carbon nanotubes and absorption band width follow the same trend could be shown by four different nanotube suspensions. The reason for this is that transient absorption saturation behaviour is governed by exciton-exciton annihilation. Due to their one-dimensional structure, carbon nanotubes are strongly influenced by environmental effects, resulting in a varying inhomogeneous broadening of the absorption bands and thus in different excited state potential barriers for various solvents and dispersion agents. Low potential barriers permit a long ranged exciton diffusion. Hence, efficient exciton-exciton annihilation takes place at comparatively low exciton densities and the transient absorption signal saturates at low pulse fluences. KW - Exziton KW - (6,5)-Kohlenstoffnanoröhren KW - Exzitonengröße KW - Transiente Absorption KW - Exzitonendynamik KW - Zeitaufgelöste Photolumineszenz KW - (6,5) carbon nanotubes KW - exciton size KW - transient absorption KW - exciton dynamics KW - time-resolved photoluminescence KW - Kohlenstoff-Nanoröhre KW - Spektroskopie KW - Zeitauflösung KW - Zeitaufgelöste Spektroskopie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-116712 ER - TY - THES A1 - Renziehausen, Klaus T1 - Wechselwirkung von Molekülen mit Laserpulsen: Untersuchungen zur numerischen Implementierung zeitabhängiger Störungstheorie und zu Effekten der absoluten Phase von Laserpulsen beliebiger Länge T1 - Interaction of molecules with laser pulses: researches on the numerical implementation of time-dependent perturbation theory and on carrier envelope phase effects for laser pulses of arbitrary length N2 - In dieser Dissertation wurden zwei Aspekte der Wechselwirkung von Laserpulsen mit Molekülen betrachtet: Erstens wurden numerische Algorithmen, die auf der zeitabhängigen Störungstheorie basieren, zur Berechnung von quantenmechanischen Wellenfunktionen analysiert. Zweitens wurden Effekte der absoluten Phase (Carrier envelope phase = CEP) von Laserpulsen bei der Laseranregung molekularer Systeme analysiert. In den Analysen zum ersten Aspekt wurden zwei verschiedene Algorithmen - in dieser Arbeit als simple und improved algorithm bezeichnet - verwendet, und die Normabweichung von mit diesen Algorithmen berechneten Wellenfunktionen untersucht. Es konnte gezeigt werden, dass diese Normabweichung für beide Algorithmen in zwei unterschiedliche Beiträge zerlegt werden kann. Der erste Normabweichungsbeitrag tritt aufgrund der numerischen Diskretisierung der Zeit auf und verschwindet, wenn der Zeitschritt, der die Dauer der Intervalle für diese Diskretisierung angibt, gegen Null geht. Man kann den ersten Normabweichungsbeitrag mit exzellenter Genauigkeit berechnen und seine Eigenschaften, die sich für die beiden Algorithmen erheblich unterschieden, eingehend analysieren. Der zweite Normabweichungsbeitrag tritt dadurch auf, dass die zeitabhängige Störungstheorie nicht normerhaltend ist, und geht daher gegen Null, wenn die Störungsordnung gegen unendlich geht. Dieser zweite Beitrag ist außerdem in guter Näherung unabhängig vom Zeitschritt und für beide Algorithmen näherungsweise gleich. Des Weiteren kann man das Verhalten des zweiten Normabweichungsbeitrags im Gegensatz zum ersten Beitrag nur qualitativ beschreiben. Für die Analyse zum zweiten Themengebiet dieser Arbeit, den CEP-Effekten, wurde betrachtet, ob CEP-Effekte auch für Laserpulse beliebiger Länge auftreten können. Über eine analytische Betrachtung erkennt man, dass dies für ein Zweiniveausystem nur dann der Fall ist, wenn beide Zustände vor Beginn der Wechselwirkung des Systems mit dem Laserpuls besetzt sind. Man kann aus diesem Ergebnis folgern, dass für einen Laserpuls, der zwei elektronische Zustände eines Moleküls über Einphotonenübergänge koppelt, in der Regel kein CEP-Effekt für beliebige Längen dieses Pulses auftritt. Der Grund dafür ist, dass vor der Wechselwirkung eines molekularen Systems mit einem Laserpuls für dieses üblicherweise nur der elektronische Grundzustand besetzt ist. In dieser Arbeit wird gezeigt, dass dieses Problem durch ein spezielles Zweipulsschema für die Anregung eines molekularen Systems gelöst werden kann. Für dieses Pulsschema wird ein erster Puls verwendet, der zeitlich so kurz ist, dass Wellenpakete in mehreren elektronischen Zuständen angeregt werden. Der nachfolgende zweite Laserpuls ist spektral schmal, und seine zeitliche Länge kann beliebig groß gewählt werden. Man erhält für dieses Pulsschema Observablen, die von der CEP des zweiten Pulses, aber nicht von der CEP des ersten Pulses abhängen; somit ist ein CEP-Effekt nachweisbar. Derartige Observablen sind geometrische Asymmetrien für Zerfallsprodukte von Photodissoziationsreaktionen. Insbesondere unterscheidet sich das hier vorgestellte Pulsschema von anderen Zweipulsschemata, für welche Observablen von der Differenz der CEPs beider Pulse abhängen, aber nicht von der CEP einer der beiden Pulse allein. N2 - In this dissertation, two aspects for the interaction of laser pulses with molecules were considered: First, we analysed numerical algorithms which are based on time-dependent perturbation theory. Second, carrier envelope phase (= CEP) effects of laser pulses for the laser excitation of molecular systems were studied. In the analyses to the first aspect, two different algorithms referred in this thesis as simple and improved algorithm were used, and the norm deviation occurring for wave functions calculated with these algorithms was examined. As a result, this norm deviation can be divided in two different contributions for both algorithms. The first contribution occurs because of the numerical discretisation of time and disappears when the time step defining the length of the intervals for this discretisation goes to zero. This first contribution can be calculated with excellent accuracy, and its properties, which differ substantially for the two algorithms, can be analysed in detail. The second contribution occurs because time-dependent perturbation theory is not norm conserving. Thus, it goes to zero when the perturbation order goes to infinity. Moreover, this second contribution is in good approximation independent of the time step, and it is approximately equal for both algorithms. Futhermore, in contrast to the first contribution the behaviour of the second contribution can be described only qualitatively. For the analyses to the second aspect of this thesis, namely CEP effects, it was considered if CEP effects can also appear for laser pulses of arbitrary length. An analytical inspection reveals that for a two level system this is only true if both states are occupied before the laser pulse starts to interact with the system. This result allows to conclude that as a rule when a laser pulse couples two electronical states of a molecule by one photon transitions, no CEP effect arises for arbitrary lengths of this laser pulse. The reason for this is that normally only the electronical ground state is occupied before the interaction of the molecular system with the laser pulse starts. In this thesis it is shown that this problem can be solved with a special two-pulse-scheme for the excitation of a molecular system. For this pulse scheme a first pulse is applied which is temporally as short as to excite wave packets in several electronic states. The subsequent second laser pulse is spectrally small, and its temporal length can be chosen unconditionally large. For this pulse scheme there are observables which depend on the CEP of the second pulse but not on the CEP of the first pulse, thus a CEP effect is measurable. Such observables are geometrical asymmetries for decay products of photodissociation reactions. In particular the pulse scheme presented here differs from other two-pulse-schemes where the observables depend on the difference of the CEPs of both pulses but not on the CEP of one of the two pulses alone. KW - Störungstheorie KW - Computerphysik KW - Laserchemie KW - Kurzzeitphysik KW - Molekülphysik KW - Numerische Physik KW - Ultrakurzzeitlaser KW - Effekte der absoluten Phase KW - Quantendynamik KW - Molekularbewegung KW - Computational physics KW - Ultrashort pulse lasers KW - Carrier envelope phase effects KW - Quantum dynamics KW - Molecular motion Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-100850 ER - TY - THES A1 - Lang, Melanie T1 - Valence Shell Photoionization of Soot Precursors with Synchrotron Radiation T1 - Valenzschalen-Photoionisation von Rußvorläufern mit Synchrotron-Strahlung N2 - A series of combustion relevant species like radicals, carbenes and polycyclic aromatic hydrocarbons were characterized in the gas phase by vacuum UV synchrotron radiation and their ionization energies (IE) and further spectroscopic details of the respective cations were retrieved from threshold photoelectron spectra. The reactive intermediates were generated by flash vacuum pyrolysis from stable precursor molecules. Furthermore three polycyclic aromatic hydrocarbons were investigated by threshold photoelectron spectroscopy, too. The experiment was performed at the VUV beamline of the Swiss Light Source in Villigen/Switzerland and the iPEPICO (imaging photoelectron photoion coincidence) setup was applied to correlate ions and electrons from the same ionization event. From the threshold photoelectron spectra and from quantum chemical computations the vibrational structure of the molecule cations and the geometry changes upon ionization were assigned. The ionization energies of the two C4H5 isomers 2-butyn-1-yl and 1-butyn-3-yl were assigned to 7.94±0.02 eV and 7.97±0.02 eV, respectively. The isomerization between the two isomers was computed to have a barrier of 2.20 eV, so a rearrangement between the two radicals cannot be excluded. From the threshold photoelectron spectra of the two constitutional C4H7 isomers 1-methylallyl and 2-methylallyl the ionization energies were assigned to 7.48±0.02 eV and to 7.59±0.02 eV for 1-E-methylallyl and 1-Z-methylallyl, as well as to 7.88±0.01 eV for 2-methylallyl. The two radicals 9-fluorenyl, C13H9, and benzhydryl, C13H11, were observed to ionize at 7.01±0.02 eV and 6.7 eV. The threshold photoelectron spectrum of benzhydryl also incorporated the signal of the diphenylmethyl carbene, C13H10, which has an IE at 6.8 eV. In addition, the head-to-head dimers of 9-fluorenyl and benzhydryl were observed as products in the pyrolysis. C26H18 has an IE at 7.69±0.04 eV and C26H22 has an IE at 8.13±0.04 eV. The three polycyclic aromatic hydrocarbon DHP (C14H16) 1-PEN (C18H22) and THCT (C22H16) were investigated in an effusive beam. The ionization energies were determined to IE(DHP)= 7.38±0.02 eV, IE(1-PEN)=7.58±0.05 eV and IE(THCT)=6.40±0.02 eV. Furthermore the thermal decomposition and the dissociative photoionization of diazomeldrum’s acid was investigated. The pyrolysis products yielded beside several other products the two not yet (by photoelectron spectroscopy) characterized molecules E-formylketene, C3O2H2 and 2-diazoethenone, N2C2O. The dissociative photoionization showed the Wolff rearrangement to occur at higher internal energies. N2 - Die vorliegende Arbeit befasst sich mit VUV Valenz-Photoionisations-Experimenten, welche in der Gasphase an verschiedenen Kohlenwasserstoffradikalen und drei polyzyklischen aromatischen Kohlen- wasserstoffen (PAH) durchgeführt wurde. Des Weiteren wurden die Pyrolyseprodukte der Dia- zomeldrumsäure mit dem genannten Experiment untersucht. Die reaktiven Intermediate wurden im Vakuum mittels Flash-Pyrolyse aus stabilen Vorläufermolekülen erzeugt. Die meisten dieser waren kommerziell erhältlich, wobei auch einige Moleküle selbst im Würzburger Chemielabor synthetisiert wurden. Die erzeugten Radikale und Carbene wurden in einem kontinuierlichen Molekularstrahl ex- pandiert. Um den Vorläufer in die Gasphase zu überführen, wurden verschiedene Molekular-Quellen eingesetzt. Die Auswahl erfolgte dabei in Abhängigkeit des Dampfdrucks des Vorläufermoleküls. Die Polyzyklischen Aromaten (PAH) wurden in der Arbeitsgruppe von Prof. Dr. Anke Krüger im Insti- tut für Organische Chemie der Universität Würzburg synthetisiert. Die PAH wurden in einer Fest- stoffmolekularquelle geheizt und in einem effusiven Molekularstrahl expandiert. Die Ionisation aller Spezies erfolgte mit monochromatischem VUV-Synchrotronlicht, das an der Bending-Magnet Beam- line an der Swiss Light Source in Villigen/Schweiz erzeugt wird. Das Schwellenphotoelektronen- Photoionen-Koinzidenz (TPEPICO) Experiment wurde zur Detektion und Analyse der Ionisation- sprozesse angewendet. Dieses Experiment ermöglicht es massenselektierte Ionen und Schwellen- photoelektronen des selben Ionisationsereignisses zu korrelieren. Die Ionen wurden in einem Time- of-Flight Massenspektrometer detektiert. Durch Integration des Massensignals und anschließende Auswertung des zugeordneten Schwellenphotoelektronen-Signals erhält man das Schwellenphotoelek- tronen-Spektrum (TPES) des Moleküls bzw. Fragments. Aus den TPE-Spektren konnten Ion- isierungsenergien bestimmt werden und mit Hilfe von Franck-Condon-Simulationen sowohl die Schwin- gungsstruktur im Kation, als auch die Geometrieänderung, hervorgerufen durch die Ionisation, analysiert werden. Berechnete Ionisierungsenergien wurden zusätzlich mit den experimentellen Daten verglichen. Im Folgenden werden die einzelnen Ergebnisse aufgelistet. ... KW - Ultraviolett-Photoelektronenspektroskopie KW - photoelectron-photoion coincidence KW - Photoelektronen-Photoionen-Koinzidenz KW - reactive intermediates KW - pyrolysis KW - reaktive Intermediate KW - Pyrolyse KW - Fotoionisation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-117038 ER - TY - THES A1 - Stehr, Vera T1 - Prediction of charge and energy transport in organic crystals with quantum chemical protocols employing the hopping model T1 - Vorhersage des Ladungs- und Energietransports in organischen Kristallen mit quantenchemischen Methoden unter Verwendung des Sprungmodells N2 - As organic semiconductors gain more importance for application, research into their properties has become necessary. This work investigated the exciton and charge transport properties of organic semiconducting crystals. Based on a hopping approach, protocols have been developed for the calculation of Charge mobilities and singlet exciton diffusion coefficients. The protocols do not require any input from experimental data except for the x-ray crystal structure, since all needed quantities can be taken from high-level quantum chemical calculations. Hence, they allow to predict the transport properties of yet unknown compounds for given packings, which is important for a rational design of new materials. Different thermally activated hopping models based on time-dependent perturbation theory were studied for the charge and exciton transport; i. e. the spectral overlap approach, the Marcus theory, and the Levich-Jortner theory. Their derivations were presented coherently in order to emphasize the different levels of approximations and their respective prerequisites. A short reference was made to the empirical Miller-Abrahams hopping rate. Rate equation approaches to calculate the stationary charge carrier mobilities and exciton diffusion coefficients have been developed, which are based on the master equation. The rate equation approach is faster and more efficient than the frequently used Monte Carlo method and, therefore, provides the possibility to study the anisotropy of the transport parameters and their three-dimensional representation in the crystal. The Marcus theory, originally derived for outer sphere electron transfer in solvents, had already been well established for charge transport in organic solids. It was shown that this theory fits even better for excitons than for charges compared with the experiment. The Levich-Jortner theory strongly overestimates the charge carrier mobilities and the results deviate even stronger from the experiment than those obtained with the Marcus theory. The latter contains larger approximations by treating all vibrational modes classically. The spectral overlap approach in combination with the developed rate equations leads to even quantitatively very good results for exciton diffusion lengths compared to experiment. This approach and the appendant rate equations have also been adapted to charge transport. The Einstein relation, which relates the diffusion coefficient with the mobility, is important for the rate equations, which have been developed here for transport in organic crystals. It has been argued that this relation does not hold in disordered organic materials. This was analyzed within the Framework of the Gaussian disorder model and the Miller-Abrahams hopping rate. N2 - Organische Halbleiter gewinnen immer größere Bedeutung für Anwendungen in der Elektronik. In dieser Arbeit wurden deren Eigenschaften bezüglich des Exzitonen- und Ladungstransports untersucht. Diese beiden Prozesse sind wesentlich für viele Bauteile der organischen Elektronik, wie zum Beispiel Solarzellen. Ausgehend von einem Sprungmodell wurden Verfahren zur Berechnung von Ladungsträgerbeweglichkeiten und Diffusionskoeffizienten von Singulettanregungen entwickelt, wofür bis auf die Röntgenstruktur des Kristalls keine weiteren experimentellen Daten benötigt werden, da alle notwendigen Größen durch quantenchemische Rechnungen auf hohem Niveau bestimmt werden können. Dies ermöglicht die Vorhersage der Transporteigenschaften von noch unbekannten Materialien mit bekannter Struktur, was eine Voraussetzung für das Maßschneidern neuer Materialien darstellt. Verschiedene, auf der zeitabhängigen Störungstheorie basierende thermisch aktivierte Sprungmodelle - der spektrale Überlappungsansatz, die Marcus- und die Levich-Jortner-Theorie - wurden für die Anwendung auf den Ladungs- und Energietransport hin untersucht. Ausgehend von Fermis Goldener Regel wurden die Sprunggleichungen konsistent hergeleitet, um die verschiedenen Abstufungen der jeweils vorgenommenen Näherungen und deren Voraussetzungen deutlich zu machen. Zusätzlich dazu wurde ein kurzer Exkurs zur empirischen Miller-Abrahams-Sprungrate und deren Anwendung in amorphen Systemen gemacht. Unter Verwendung der Mastergleichung wurden Ratengleichungsansätze zur Berechnung der stationären Ladungsträgerbeweglichkeiten und Exzitonendiffusionskoeffizienten entwickelt. Die Berechnung der Transportgrößen über Ratengleichungen ist wesentlich schneller und effizienter als die häufig angewendete Monte-Carlo-Simulation. Dies ermöglicht die Analyse der Anisotropie des Transports im Kristall und ihre dreidimensionale Darstellung. Die Marcustheorie, die ursprünglich für Elektronentransfer in Lösungen entwickelt wurde, hat sich auch für Ladungstransport in organischen Festkörpern bewährt. Hier wurde diese Theorie auch auf Exzitonentransport übertragen und gezeigt, daß sie im Vergleich zum Experiment für Exzitonen sogar bessere Ergebnisse liefert als für Ladungsträger. Die Levich-Jortner-Theorie überschätzt die Ladungsträgerbeweglichkeiten im Falle der Acene sehr stark. Ihre Ergebnisse weichen sogar stärker vom Experiment ab als die der Marcustheorie. Letztere enthält deutlich stärkere Näherungen, weil alle Molekülschwingungen klassisch behandelt werden. Der spektrale Überlappungsansatz führt zusammen mit den hier entwickelten Ratengleichungen sogar zu quantitativ guten Ergebnissen für die Exzitonendiffusion. Dieser Ansatz und die Ratengleichungen wurden auch für die Berechnung der Ladungsträgerbeweglichkeiten angepaßt. Für die in dieser Arbeit entwickelten Ratengleichungen ist die Einsteinrelation, welche die Diffusion mit der Drift in Beziehung setzt, von zentraler Bedeutung. Es ist umstritten, ob diese Beziehung auch in amorphen, ungeordneten Materialien gültig ist. Dieser Frage wurde im Rahmen des Gaußschen Unordnungsmodells und der Miller-Abrahams-Sprungrate nachgegangen. KW - Exziton KW - exciton KW - Ladungstransfer KW - charge transfer KW - organische Halbleiter KW - organic semiconductors KW - Sprungmodell KW - hopping model Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-114940 ER - TY - THES A1 - Giegerich, Jens T1 - Velocity-Map-Imaging Studien an reaktiven Intermediaten: Fulvenallen, C3H2 Isomere und Alkylradikale T1 - Velocity-Map-Imaging studies on reactive intermediates: fulvenallen, C3H2 isomers and alkylradicals N2 - In der vorliegenden Dissertation wurde die Photodissoziationsdynamik einer Reihe reaktiver Intermediate mittels Velocity-Map-Imaging Spektroskopie untersucht. Diese sind vor allem im Kontext von Verbrennungsprozessen sowie der Chemie im interstellaren Raum von Interesse. Die wichtigsten Erkenntnisse dieser Arbeit sollen nun kurz zusammengefasst werden. Fulvenallen stellt einen wichtigen Verzweigungspunkt in der Verbrennung von Toluol dar. Die Photodissoziationsdynamik von Fulvenallen, welches pyrolytisch aus Phthalid generiert wurde, konnte im Wellenlängenbereich von 245 - 255 nm aufgeklärt werden. Dabei ist die ermittelte Dissoziationsrate (kH ≈ 107 s-1) in guter Übereinstimmung mit der mittels RRKM vorhergesagten Rate. In VMI-Experimenten zeigten die, durch Photodissoziation abstrahierten, Wasserstoffatome eine isotrope Winkelverteilung, wobei diese einen Anteil an der Überschussenergie von = 0:09 in Form von kinetischer Energie besaßen. Die Photodissoziation von Fulvenallen erfolgt statistisch ohne nennenswerte Rückbarriere. Sowohl Winkel- als auch Energieverteilung sprechen für den folgenden Dissoziationsmechanismus: Fulvenallen wird durch ein Photon in den D1A1 Zustand angeregt, aus dem es durch interne Konversion schnell in den elektronischen Grundzustand relaxiert, aus dem es anschließend in einem statistischen Prozess dissoziiert. Spezies der Zusammensetzung C3H2 wurden im interstellaren Raum und in Flammenexperimenten beobachtet. In dieser Arbeit wurden zwei Isomere, Propargylen und Cyclopropenyliden, untersucht. Die Photodissoziation von Propargylen wurde bei einer Anregungswellenlänge von 250 nm untersucht. In den VMI-Experimenten wurden Wasserstoffatome mit einem Erwartungswert der kinetischen Energie von = 0.53 eV beobachtet, was einem Anteil an der Überschussenergie von = 0.48 entspricht. Diese von Propargylen abstrahierten H-Atome waren trotz der hohen Translationsenergie mit einem Anisotropieparameter von = -0.05 nur leicht anisotrop verteilt. Durch den Vergleich mit quanten-klassischen Dynamik Simulationen ließ sich folgendes Bild der Dissoziation gewinnen: Propargylen wird mit 250 nm in den sechsten angeregten Triplett-Zustand T6 angeregt. Die anschließende Dissoziation ist direkt und erfolgt in ca. 200 fs aus T4 - T6. Der geringe Anisotropiegrad wurde durch einen Dissoziationsprozess erklärt, bei dem µT und die gebrochene C-H Bindung annähernd im magischen Winkel zueinander angeordnet sind. Die Photodissoziation von Cyclopropenyliden wurde bei einer Anregungswellenlänge von 271 nm untersucht. Dabei wurden die Experimente an zwei unterschiedlichen Radikalvorläufern, 3-Chlorcyclopropen und einem Quadricyclanderivat, durchgeführt. Diese führten im Wesentlichen zu denselben Ergebnissen. Die VMI-Experimente zeigen, dass in der Photodissoziation von Cyclopropenyliden die Hälfte der Überschussenergie in die Translation der Wasserstoffatome fließt (= 0:50). Aus der Winkelverteilung der abstrahierten Wasserstoffatome ergab sich eine isotrope Verteilung ( = 0). Der Vergleich mit quantendynamischen Simulationen erlaubt folgende Aussagen über den Dissoziationsmechanismus: Cyclopropenyliden wird mit einem Photon mit 271 nm in den zweiten angeregten Singulett-Zustand angeregt. Durch zwei konische Durchschneidungen relaxiert es in den elektronischen Grundzustand. Dabei kann die zyklische Struktur aufgebrochen und ein lineares Isomer gebildet werden. Die Berechnungen sagen ein Verhältnis cyklischer zu offenkettiger Struktur (Bruch der C=C Doppelbindung) von ca. 75 : 20 voraus. Die Dissoziation erfolgt annähernd ideal statistisch aus dem elektronischen Grundzustand. Für beide Isomere ergab sich eine sehr gute Übereinstimmung zwischen Theorie und Experiment. Alkylradikale spielen ebenfalls eine wichtige Rolle in der interstellaren und der Verbrennungschemie und können als prototypische offenschalige Systeme angesehen werden. In der vorliegenden Arbeit wurde die Photodissoziationsdynamik des i-Propyl- und des t-Butylradikals untersucht und die Ergebnisse mit früheren VMI-Studien am Ethylradikal verglichen. Die Translationsenergieverteilung der in der Photodissoziation erzeugten H-Atome ist für alle drei Radikale bimodal. Dabei sind die Wasserstoffatome, welche ihr Maximum in der Translationsenergieverteilung bei niedrigen kinetischen Energien erreichen, isotrop verteilt. Die H-Atome mit hoher kinetischer Energie sind anisotrop verteilt. Aus dem Vergleich mit älteren Arbeiten wurde ein möglicher Dissoziationsmechanismus für die Alkylradikale erarbeitet. Dieser basiert auf Rydberg-Valenz-Wechselwirkungen und kann beide beobachteten Wasserstoffatomkanäle erklären. Außerdem kann damit ein möglicher C-C Bindungsbruch und die Bildung eines Methylradikals erklärt werden, welche für t-Butyl in der Literatur bereits beobachtet wurde. Für eine solide theoretische Basis sind jedoch weitere umfassende quantenchemische und quantendynamische Studien erforderlich. Methyliodid zählt, was die Photodissoziation anbelangt, zu den am besten untersuchten Molekülen. Die in dieser Arbeit durchgeführten VMI-Experimente bezüglich der Photodissoziation von Methyliodid dienten in erster Linie als Kalibrierexperimente der Apparatur für schwerere Massen als Wasserstoff. Dabei zeigten die Experimente eine qualitativ gute Übereinstimmung mit früheren Studien, wodurch die Kalibrierparameter ermittelt werden konnten. Außerdem wurde die große Absorption bei 266 nm genutzt um die neue Photolysequelle in Betrieb zu nehmen. Damit ist es zukünftig möglich, pyrolytisch nicht zugängliche Radikale, wie z.B. Radikale, deren ungepaartes Elektron an einem Sauerstoffatom lokalisiert ist, zu erzeugen. Des Weiteren wurden pyrolytisch und photolytisch erzeugte freie Radikale miteinander verglichen. Dabei zeigte sich, dass die Photolyse Radikale mit geringerer interner Energie generiert, wobei die Pyrolyse eine deutlich höhere Konversionseffizienz besitzt. Aufgenommene Images bei unterschiedlichen Pyrolyseleistungen erlaubten die Abschätzung der effektiven Temperatur des Molekularstrahls. Diese Erkenntnis ist besonders im Hinblick auf die Diskussion zukünftiger Pyrolyseexperimente interessant. N2 - The photodissociation dynamics of a series of reactive intermediates has been studied in this dissertation using velocity-map-imaging spectroscopy. They are of interest in the context of combustion and astrochemistry. The most important results are summarized below. Fulvenallene is an important branching point in the combustion of toluene. The photodissociation dynamics of fulvenallene, which has been generated pyrolytically from phthalide, was elucidated in the wavelength region from 245 to 255 nm. The determined dissociation rate (kH ≈ 107 s-1) is in good agreement with RRKM predictions. VMI-experiments showed that the H-atoms, generated via photodissociation, are isotropically distributed. A fraction of the available excess energy of = 0:09 is released as translation. The photodissociation of fulvenallene is statistical without a notable reverse barrier. Both the photofragment angular distribution as well as the translational energy distribution point at the following statistical dissociation mechanism: One photon excites fulvenallene to the D1A1 state which undergoes a fast internal conversion to the electronic ground state followed by the statistical dissociation of the molecule. Molecules with the composition of C3H2 were observed in the interstellar medium and in flame experiments. Two of the possible isomers, propargylene and cyclopropenylidene, have been studied in this thesis. The photodissociation of propargylene has been studied at 250 nm excitation. H-atoms with an expectation value for the translational energy of = 0:53 eV, corresponding to a fraction of the total available excess energy of = 0:48 have been observed in the VMI-experiments. Despite the high kinetic energy of the H-atoms, their photofragment angular distribution was almost isotropic with an anisotropy parameter of = -0:05. Quantum-classical dynamics simulations suggest the following dissociation mechanism: Propargylene is excited to the 6th excited triplet state T6 at 250 nm. The subsequent dissociation is direct and takes place from T4 - T6 within roughly 200 fs after excitation. The dissociation occurs with µT and the breaking C-H bond being arranged close to the magic angle, which explains the low anisotropy. The photodissociation of cyclopropenylidene has been studied at an excitation wavelength of 271 nm. Two different radical precursors, 3-chlorocyclopropene and a quadricyclan derivate, have been employed for the experiments and lead essentially to the same results. The VMI-experiments showed that half of the available excess energy in the photodissociation of cyclopropenylidene was released as translation (= 0:50), while the photofragment angular distribution was isotropic ( = 0). Comparison with quantumdynamic simulations allow to propose the following dissociation mechanism: Cyclopropenylidene is excited by a 271 nm photon into the 2nd excited singlet state. The excited molecule relaxes to the electronic ground state via two conical intersections. During this process the cyclic geometry can break and an open-chain isomer is formed. Calculations suggest a proportion of the cyclic to the open-chain isomer (break of the C=C bond) of 75 : 20. The dissociation is approximately of ideal statistical nature and takes place from the electronic ground state. Alkyl radicals also play an important role in interstellar chemistry and combustion chemistry. In the present dissertation the photodissociation dynamics of the i-propyl and the t-butyl radical have been investigated and compared to previous VMI studies of the ethyl radical. The translational energy distribution of the H-atoms generated via photodissociation is bimodal for all three radicals. While H-atoms with a maximum at low translational energies are distributed isotropically, H-atoms with high kinetic energy are distributed anisotropically. Comparison with previous studies suggest a possible dissociation mechanism for alkyl radicals. The dissociation mechanism is based on Rydberg-valance interactions and explains the two observed H-atom pathways. It furthermore provides an explanation for the C-C bond cleavage and the formation of methyl radicals, which has been observed for the t-butyl radical in the literature. For a solid theoretical basis further extensive high-level computations are necessary. The photodissociation of methyl iodide is one of the most extensively studied photodissociation processes. VMI-experiments concerning the photodissociation of methyl iodide were primarily carried out as calibration experiments for fragments which are heavier than H-atoms. The experiments were in good qualitative agreement with previous studies and calibration parameters were established. Furthermore, the high absorption at 266 nm was used to put a photolysis source into operation. This setup allows the generation of radicals which can't be generated pyrolytically, e. g. oxygen containing radicals. The pyrolytically and photolytically generated free radicals were compared. While radicals generated via photolysis have less internal energy than pyrolytically generated radicals, pyrolysis has a higher conversion effciency, resulting in a higher signal. Imaging experiments conducted at various pyrolysis powers allowed the approximative determination of the effective temperature of the molecular beam. This result will be especially useful with regard to future pyrolysis experiments. KW - Photodissoziation KW - Dynamik KW - Radikale KW - reaktive Intermediate KW - Velocity-Map-Imaging Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-114982 ER - TY - THES A1 - Brunecker, Frank T1 - Kohlenstoffnanorohr-Komplexe - Adsorption und Desorption von (Bio-)Polymeren T1 - Carbon Nanotube Complexes - Adsorption and Desorption of (Bio-)Polymers N2 - Zur Charakterisierung der Wechselwirkungen zwischen organischen Dispergiermitteln und nanoskaligen Oberflächen stellen Komplexe aus Kohlenstoffnanoröhren und (Bio-)Polymeren aufgrund der großen Oberfläche der Nanoröhren und der kommerziellen Verfügbarkeit fluoreszenzmarkierter DNA-Oligomere unterschiedlicher Länge sowie intrinsisch fluoreszierender Polymere ein vielversprechendes Modellsystem dar. Im Rahmen der vorliegenden Dissertation wurden verschiedene Methoden evaluiert, um die Stabilität derartiger Komplexe zu untersuchen und dadurch Rückschlüsse auf das Adsorptionsverhalten der (Bio-)Polymere zu ziehen. Dabei konnte gezeigt werden, dass das publizierte helikale Adsorptionsmodell der DNA auf Kohlenstoffnanoröhren die Resultate der durchgeführten Experimente nur unzureichend beschreiben kann und stattdessen andere Adsorptionskonformationen in Erwägung gezogen werden müssen. N2 - Interactions between organic dispersants and nanoscopic surfaces are of crucial interest in the field of nanotechnology. For characterization of such interactions, complexes of single-wall carbon nanotubes and (bio-)polymers are considered to be a promising model system due to the large specific surface of the nanotubes as well as the commercial availability of fluorescently labeled, length-scaled DNA oligomers and intrinsic fluorescent synthetic polymers. The present dissertation focused on probing suitable methods for the investigation of the stability of these complexes in order to determine the adsorption behavior of the examined (bio-)polymers. The findings of the performed experiments are inconsistent with the previously published helical adsorption of DNA to carbon nanotubes but give rise to additional adsorption conformations. KW - Kohlenstoff-Nanoröhre KW - Adsorption KW - Desorption KW - Reaktionskinetik KW - Kinetik KW - Konzentrationssprungmethode KW - Numerische Verfahren KW - Einzelstrang-DNA Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-113485 ER - TY - JOUR A1 - Kanal, Florian A1 - Keiber, Sabine A1 - Eck, Reiner A1 - Brixner, Tobias T1 - 100-kHz shot-to-shot broadband data acquisition for high-repetition-rate pump–probe spectroscopy N2 - Shot-to-shot broadband detection is common in ultrafast pump–probe spectroscopy. Taking advantage of the intensity correlation of subsequent laser pulses improves the signal-to-noise ratio. Finite data readout times of CCD chips in the employed spectrometer and the maximum available speed of mechanical pump-beam choppers typically limit this approach to lasers with repetition rates of a few kHz. For high-repetition (≥ 100 kHz) systems, one typically averages over a larger number of laser shots leading to inferior signal-to-noise ratios or longer measurement times. Here we demonstrate broadband shot-to-shot detection in transient absorption spectroscopy with a 100-kHz femtosecond laser system. This is made possible using a home-built high-speed chopper with external laser synchronization and a fast CCD line camera. Shot-to-shot detection can reduce the data acquisition time by two orders of magnitude compared to few-kHz lasers while keeping the same signal-to-noise ratio. KW - cameras KW - CCD KW - charge-coupled device KW - modulators KW - time-resolved spectroscopy KW - ultrafast spectroscopy KW - ultrafast measurements Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112853 ER - TY - JOUR A1 - Brixner, Tobias A1 - Pawłowska, Monika A1 - Goetz, Sebastian A1 - Dreher, Christian A1 - Wurdack, Matthias A1 - Krauss, Enno A1 - Razinskas, Gary A1 - Geisler, Peter A1 - Hecht, Bert T1 - Shaping and spatiotemporal characterization of sub-10-fs pulses focused by a high-NA objective N2 - We describe a setup consisting of a 4 f pulse shaper and a microscope with a high-NA objective lens and discuss the spects most relevant for an undistorted spatiotemporal profile of the focused beam. We demonstrate shaper-assisted pulse compression in focus to a sub-10-fs duration using phase-resolved interferometric spectral modulation (PRISM). We introduce a nanostructure-based method for sub-diffraction spatiotemporal characterization of strongly focused pulses. The distortions caused by optical aberrations and space–time coupling from the shaper can be reduced by careful setup design and alignment to about 10 nm in space and 1 fs in time. KW - Interference microscopy KW - Scanning microscopy KW - Subwavelength structures KW - nanostructures KW - Pulse shaping KW - Ultrafast measurements Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-111120 ER - TY - JOUR A1 - Knorr, Johannes A1 - Rudolf, Philipp A1 - Nuernberger, Patrick T1 - A comparative study on chirped-pulse upconversion and direct multichannel MCT detection N2 - A comparative study is carried out on two spectroscopic techniques employed to detect ultrafast absorption changes in the mid-infrared spectral range, namely direct multichannel detection via HgCdTe (MCT) photodiode arrays and the newly established technique of chirped-pulse upconversion (CPU). Whereas both methods are meanwhile individually used in a routine manner, we directly juxtapose their applicability in femtosecond pump-probe experiments based on 1 kHz shot-to-shot data acquisition. Additionally, we examine different phase-matching conditions in the CPU scheme for a given mid-infrared spectrum, thereby simultaneously detecting signals which are separated by more than 200 cm−1. KW - Ultrafast spectroscopy KW - Upconversion KW - infrared spectroscopy KW - Lithium niobate KW - CCD, charge-coupled device Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-111334 ER - TY - THES A1 - Herterich, Jörg T1 - Pikosekunden-zeitaufgelöste Photoionisation: 2-Methylallyl-Radikal und Pyracen T1 - Pikosecond-time-resolved photoionisation: 2-Methylallyl-radical and Pyracene N2 - Die vorliegende Dissertation untersucht fünf unterschiedliche Moleküle hinsichtlich ihrer Geometrien im Grund- und angeregten Zustand sowie deren Dynamik nach elektronischer Anregung. Der Fokus liegt dabei unter anderem auf Pi-konjugierten Systemen, die über eine zusätzliche aliphatische Einheit verbrückt (Paracyclophan- Derivate) oder erweitert (Pyracen) sind. Die Paracyclophan-Derivate sind ein ideales Modellsystem um Einsicht in Pi-Pi-Wechselwirkungen zu erlangen. Ein weiterer Schwerpunkt dieser Arbeit beschreibt die Dynamik des resonanzstabilisierten 2-Methylallyl-Radikals. Die Forschung an solchen kleinen Kohlenwasserstoff-Radikalen ist wichtig, da auf deren Grundlage Modelle entwickelt werden können, die zum Beispiel helfen, den Verbrennungsprozess aufzuklären. Aufgrund ihrer Instabilität sind solche kleinen Kohlenwasserstoff-Radikale nicht einfach zu handhaben und das spektroskopische Vermessen stellt immer eine Herausforderung dar. N2 - This dissertation examines five different molecules with respect to their geometries in the ground and excited states and their dynamics after electronic excitation. The focus is on pi-conjugated systems, bridged (paracyclophane derivatives) or Extended (pyracen) by an additional aliphatic moiety. Paracyclophanes are suitable models to study the interaction between pi-systems, in particular the through space coupling. Moreover, this work focuses on the excited-state dynamics of the B-state of 2-methylallyl (2MA) by time-resolved photoionization with a ps-laser. Research on resonantly stabilized small radicals such as allyl or methylallyl is not only conducted because of a fundamental interest in reaction dynamics, but also because such radicals can accumulate in a reactive environment and are observed in combustion. Studies on isolated radicals yield information on their reactions, which are important in kinetic modeling of combustion processes. For example, biodiesel often contains molecules with C=C double bonds (e.g. fatty acid esters). Abstraction of H-atoms leads to alkylated allyl radicals, because the C-H bonds at the allylic sites are particularly weak. Due to their instability, such small hydrocarbon radicals are not easy to handle and their spectroscopic measurement is always a challenge. An innovation in my research was the development of a high-temperature gas cell to transfer the molecules into the gas phase and to record IR-spectra (compatible with an FT-IR spectrometer), obtaining experimental information on the most stable conformer in the electronic ground state. KW - Photoionisation KW - Pyracen KW - photoionisation KW - 2-Methylallyl KW - Pump-Probe-Spektroskopie KW - pyracene KW - 2-methylallyl KW - pump-probe-spectroscopy Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-105829 ER - TY - THES A1 - Hefner, Timo T1 - Einfluss von Dispergierungsmethode und Rohmaterialaufreinigung auf die Beschaffenheit einwandiger Kohlenstoffnanorohrsuspensionen T1 - Influence of dispersion technique and raw material purification on the properties of single-wall carbon nanotube suspensions N2 - In der vorliegenden Dissertation wurden Dispergierungseffizienz, Entbündelungseffizienz und Röhrenqualität von SWNT-Suspensionen untersucht. Die Röhrenqualität wurde durch Messung von Quantenausbeuten bewertet. Außerdem wurden Suspensionen von den drei verschiedenen Rohmaterialien CoMoCAT, Black Sand und HiPCO, hergestellt durch die Behandlung mit Ultraschall und Schermischen, verglichen. Beim Beschallen zeigte sich wie erwartet eine höhere Dispergierungseffizienz im Vergleich zum Schermischen. Diese war jeweils bei Black Sand am größten, gefolgt von CoMoCAT und HiPCO. Ein Vergleich zwischen zwei HiPCO-Materialien bestätigte die deutlichen Effizienzvorteile nicht aufgereinigter Materialien. Trotz der viel geringeren Dichte des aufgereinigten HiPCO-Materials, ließ sich dieses durch das Schermischen wesentlich schlechter dispergieren. Der Effizienzunterschied war jedoch geringer als bei Black Sand und CoMoCAT, was vermutlich auf den geringeren Unterschied der Kohlenstoffanteile zurückzuführen ist. Dieser wiederum hängt von den jeweiligen Herstellungs- und Aufreinigungsverfahren ab. Die Dispergierungsgeschwindigkeit war für gescherte Black Sand- und CoMoCAT-Proben zu Beginn der Dispergierung höher als für die jeweils beschallten Proben, weshalb durch Kombination der beiden Methoden möglicherweise eine Verbesserung der präparierten Suspensionen bezüglich der drei untersuchten Parameter erreicht werden kann. Der Vergleich der Entbündelungseffizienzen ergab erneut Vorteile beim Ultraschall gegenüber dem Schermischen. Die beschallten Black Sand- und HiPCO-Proben zeigten hierbei noch eine deutlich effizientere Auftrennung als die Proben des aufgereinigten CoMoCAT-Materials. Dieses enthält zu jedem Zeitpunkt der Beschallung noch einen entsprechend größeren Anteil an aggregierten Röhren. Beim Schermischen funktionierte die Entbündelung von Black Sand im Vergleich zu CoMoCAT und HiPCO mit Abstand am besten, was sich auch in den ODVerhältnissen beschallter und gescherter Proben widerspiegelte. Die beobachtete Quantenausbeute war bei den durch Schermischen dispergierten DGUEinzelrohrproben um bis zu 50 % höher als bei den beschallten Proben, was auf eine deutlich niedrigere Röhrenbeschädigung und somit auch auf eine höhere Röhrenqualität hindeutete. Dies wurde auch durch Vergleichsmessungen an Einzelröhren bestätigt. Außerdem dringt bei durch Ultraschall geschnittenen Röhren Wasser ins Röhreninnere ein, was beim Schermischen nicht der Fall ist. Das ermöglicht durch Schermischen vielleicht die Herstellung von Proben mit veränderten Eigenschaften. Beim Vergleich der Materialien zeigte HiPCO die höchste Quantenausbeute. Dieses Herstellungsverfahren liefert also im Vergleich zum CoMoCAT-Verfahren eine bessere Röhrenqualität. Die um 70 % höheren Quantenausbeuten der Black Sand-Proben im Vergleich zu den CoMoCAT-Proben machten die Röhrenbeschädigungen bei der Aufreinigung des Rohmaterials deutlich. Werden zudem Beschädigungen durch Ultraschall berücksichtigt, beträgt der Unterschied sogar 250 %. Die beschallten HiPCO- und Black Sand-Proben der zeitabhängigen Messungen zeigten aufgrund der effizienten Entbündelung den schnellsten Anstieg der uantenausbeuten, welche aufgrund von Beschädigungen durch den Ultraschall, beeinflusst durch die Entbündelungsund Dispergierungseffizienzen der Materialien, nach 10-20 min wieder abfielen. Die Quantenausbeuten der gescherten Proben stiegen entsprechend langsamer über die gesamte Messzeit von sechs Stunden an. Die Dispergierung mittels Schermischer bei erhöhter Viskosität führte bei einem Iodixanolanteil von 45 % zu einer fast sechsfach höheren Dispergierungseffizienz im Vergleich zu Wasser. Auch Lufteinschlüsse scheinen einen Einfluss zu haben, weshalb ein Probenvolumen zwischen 13-14 mL mit dem verwendeten Aufbau am sinnvollsten erscheint. Ob Viskosität und Lufteinschlüsse auch Entbündelungseffizienz und Röhrenqualität beeinflussen, muss noch untersucht werden. In Kapitel 5 wurde die Dispergierung von Nanoröhren mit kationischem Perylenbisimid untersucht. Nach dem Zusammengeben von PBI-Lösung und SDS-Nanorohrsuspension wurden Flokkulationseffekte beobachtet, welche durch hohe Nanorohr- oder SDS-Konzentrationen verzögert wurden. Das ermöglichte die Herstellung von PBI-Nanorohrfilmen mit Streifenmuster durch Nutzung des Kaffeering-Effektes. Es wurde gezeigt, dass die Nanoröhren in das PBI eingebettet werden können. Allerdings waren die Streifen noch sehr unregelmäßig und die Röhren in den Streifen nicht ausgerichtet. Die Stabilität der PBI-Nanorohrsuspensionen konnte durch einen Tensidaustausch vom anionischen SDS zum kationischen CTAB verbessert werden. Es konnte gezeigt werden, dass für die Vermeidung von Aggregationen während den dafür nötigen Dialysen unter anderem die möglichst geringe Bewegung der Probe entscheidend ist. Außerdem musste die CTABKrafft-Temperatur von 25 °C berücksichtigt werden. Unterhalb dieser Temperatur bildet das Tensid keine Mizellen mehr, was die Suspensionen destabilisiert. Mischexperimente von CTAB-Nanorohrsuspensionen mit Lösungen aus verschiedenen CTAB:PBI-Verhältnissen lieferten Hinweise darauf, dass CTAB alleine die Röhren nicht stabilisiern kann. Ein Grund dafür könnte eine zu geringe Anzahl an positiven Ladungen auf den Röhren sein. Demzufolge wäre immer ein gewisser Anteil an Tensid zur Stabilisierung notwendig. Trotz geringer Tensidbeimischung könnten aber Filme mit in PBI eingebetteten Röhren hergestellt werden. Unter Umständen könnten die Röhren auch in die flüssigkristalline Phase des PBIs eingebettet werden. Ein anderer Grund für die nicht ausreichende Stabilisierung könnte sein, dass die PBI-Aggregate nur sehr schlecht aufgetrennt werden. Dann könnte das PBI-Adsorptionsverhalten durch eine Verbesserung der Aggregatauftrennung beeinflusst werden. Zuletzt wurde in der vorliegenden Dissertation die Herstellung von Nanorohrgelfilmen beschrieben. Neben Homogenität durch Nutzung von Gelatine und Stabilität durch Entfernung von Iodixanol sorgte eine Silikonform für eine einheitliche Dicke und Größe der präparierten (6,5)-Gelfilme. Röhrenaggregationen während der Iodixanolentfernung durch Zentrifugenfiltration konnten auf die Alterung der verwendeten Suspensionen zurückgeführt werden. Die optischen Dichten der so hergestellten Gelfilme standen immer in ähnlichen Verhältnissen zu denen der Ausgangssuspensionen, sodass die für die Gelfilme benötigten Röhrenkonzentrationen in den Ausgangssuspensionen relativ genau berechnet werden konnten. Um das Iodixanol für die Herstellung von (6,5)/(6,4)-Gelfilmen effektiv aus den Suspensionen zu entfernen, wurden drei verschiedene Dialysemembranen getestet. Dabei stellte sich die Membran mit einer Porengröße von 50 kD als bester Kompromiss aus effektiver Iodixanolentfernung und geringem Röhrenverlust heraus. Durch Einengung der (6,5)/(6,4)-Suspension konnten drei Gelfilme mit ausreichend hohen optischen Dichten hergestellt werden, wobei der dritte Film im Gegensatz zu den ersten beiden aufgrund des immer weiter abnehmenden Probenvolumens eine deutliche Röhrenaggregation zeigt. Dadurch eignen sie sich für weiterführende Experimente, wo mit Hilfe der Transienten-Absorptionsspektroskopie Untersuchungen zu Energie- und Ladungstransferprozessen zwischen CNTs verschiedener Chiralitäten durchgeführt werden könnten. N2 - Within this present dissertation, dispersion efficiency, unbundling efficiency and tube quality of SWNT-suspensions were investigated. The tube quality was evaluated by quantum yield measurements. Furthermore, suspensions of the three different raw materials CoMoCAT, Black Sand and HiPCO, manufactured by treatment with sonication and shear-mixing, were compared. As expected, sonication exhibited a higher dispersion efficiency in comparison to shearmixing. Among the three raw materials, this efficiency was highest for Black Sand in each case, followed by CoMoCAT and HiPCO. A comparison between two HiPCO materials confirmed the considerable advantages in efficiency of unpurified materials. Despite the much lower density of the purified HiPCO-material, the dispersion with the shear-mixer was considerably less efficient. However, the difference in efficiency was smaller than for Black Sand and CoMoCAT. This is presumably due to a lower difference in carbon contents, which in turn depends on the respective manufacturing and purification processes. The dispersion rate at the beginning of the dispersion process was higher for the sheared Black Sand- and CoMoCAT samples, compared to the respective sonicated samples. Therefore, the combination of the two methods might possibly result in an improvement of the prepared suspensions with regard to the three investigated parameters. The comparison of the unbundling efficiencies once again showed the advantages of the sonication. Among these samples, the separation was considerably higher for Black Sand and HiPCO in comparison to the purified CoMoCAT. Accordingly, CoMoCAT still contains a higher proportion of aggregated tubes at any point during the sonication. Among the shearmixed samples, the unbundling worked by far best for Black Sand compared with CoMoCAT und HiPCO, which was also reflected by the OD ratios of sonicated and sheared samples. The observed quantum yield was up to 50 % higher for the sheared DGU-single-tube samples compared to the sonicated samples. This indicated a considerably lower damage to the tubes and thus a higher quality of the tubes. This was also confirmed by comparative measurements of single tubes. Furthermore, water penetrates into the tubes cut by ultrasonic sound, which is not the case for the shear-mixing. This perhaps allows the preparation of samples with modified properties. Comparing the materials, HiPCO showed the highest quantum yield. So the result of this manufacturing process is tubes with better quality than the tubes produced by the CoMoCAT process. The 70 % higher quantum yield of the Black Sand samples, compared to the CoMoCAT samples made it very clear that the tubes are damaged by the purification of the raw material. Cosidering also the damage caused by sonication, the difference is even 250 %. The sonicated HiPCO and Black Sand samples of the time-dependent measurements exhibited the fastest increase of the quantum yield due to the most efficient unbundling. It started to decrease again after 10-20 min as a result of the tube damage, influenced by the unbundling and dispersion efficiencies of the materials. Correspondingly, the quantum yields of the sheared samples increased slower over the whole measurement period of six hours. The dispersion by shear-mixing at increased viscosity resulted in an almost six times higher dispersion efficiency compared to water with an iodixanol share of 45 %. Since entrapped air also appears to influence the dispersion efficiency, it seems purposeful to use a sample volume between 13-14 mL under the given experimental conditions. It remains to be examined whether the unbundling efficiency and the tube quality are also affected by viscosity and entrapped air. In chapter 5, the dispersion of nanotubes with cationic perylene bisimide was investigated. Flocculation effects were observed after adding PBI solution to a SDS dispersed nanotube suspension. Those effects were delayed by high nanotube or SDS concentrations. This allowed the preparation of PBI nanotube films with a stripe pattern, using the coffee ring effect. It was demonstrated that the nanotubes can be embedded in the PBI. However the stripes were still arranged very irregularly and the tubes in the stripes were not aligned. The stability of the PBI nanotube suspensions was improved by an exchange of the anionic SDS to the cationic CTAB. It could be demonstrated that during the necessary dialysis, among other things, the sample should be moved as little as possible to avoid aggregation. In addition, the CTAB-Krafft-temperature of 25 °C had to be considered. Below this temperature, the tenside no longer forms micelles, which destabilizes the suspensions. Mixing experiments of CTAB nanotube suspensions with solutions consisting of different CTAB:PBI-ratios provided some evidence that CTAB alone is not able to stabilize the tubes. The reason for this may be a too small number of positive charges on the tube surface. As a result, a certain proportion of tenside would be necessary for stabilization. Despite a small addition of tenside, films with tubes embedded in PBI could be prepared. Under certain circumstances, the tubes could also be embedded in the liquid crystal phase of the PBI. Another reason for the unsufficiently stabilized tubes could be that the PBI aggregates are very difficult to separate. In such a case, the PBI adsorption behavior could be influenced by an improvement of the aggregate separation. Finally, the preparation of nanotube gel films was described. Besides homogeneity achieved by the use of gelatine and stability achieved by the removal of iodixanol, a silicone form ensured a uniform thickness and size of the prepared (6,5)-gel films. Tube aggregation during the removal of the iodixanol via centrifuge filtration could be attributed to an alteration of the used suspensions. The ODs of the so-prepared gel films always had similar ratios to the ODs of the starting suspensions. Therefore, the tube concentrations necessary for gel films could be calculated quite accurately. In order to remove the iodixanol from the suspensions for the preparation of (6,5)/(6,4)-gel films, three dialysis membranes were investigated. It turned out that the dialysis Membrane with a pore size of 50 kD is the best compromise between an efficient removal of the iodixanol and a small loss of nanotubes. By concentrating the (6,5)/(6,4)-suspension, three gel films with sufficiently high optical densities could be prepared. The third film exhibits a clear nanotube aggregation in contrast to the first two films due to the continuously decreasing sample volume. Thus, energy- and charge transfer processes between CNTs with different chiralities could be investigated using transient absorption spectroscopy. KW - Nanoröhre KW - Dispergierung KW - Schermischen KW - Perylenbisimid KW - Gelfilm KW - Beschallung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-105839 ER - TY - THES A1 - Kanal, Florian T1 - Femtosecond Transient Absorption Spectroscopy – Technical Improvements and Applications to Ultrafast Molecular Phenomena T1 - Femtosekundenzeitaufgelöste Absorptionsspektroskopie – Technische Verbesserungen und Anwendungen auf ultraschnelle molekulare Phänomene N2 - Photoinduced processes are nowadays studied with a huge variety of spectroscopic methods. In the liquid phase, transient absorption spectroscopy is probably the most versatile pump–probe technique used to study light-induced molecular phenomena. Optical time-resolved spectroscopy is established in a large number of laboratories and is still further being developed with respect to many technical aspects. Nevertheless, the full potential of shortening the data-acquisition time—necessary for the investigation of rapidly photodegrading samples and observation of macroscopically fast processes—achievable with high-repetition-rate laser systems and shot-to-shot detection was not fully exploited. Especially, shot-to-shot detection is highly beneficial due to the high correlation of subsequent laser pulses. The development and implementation of 100 kHz broadband shot-to-shot data acquisition was presented in Chapter 3. For an established laser dye as a benchmark system, ultrafast excited-state dynamics were measured for the first time with broadband shot-to-shot detection at 100 kHz. An analysis of both the noise characteristics of the employed laser and the correlation of subsequent pulses quantified the advantage of shot-to-shot data acquisition. In the utilized software environment, the time for measuring a complete data set could be sped up by a factor of three or even higher compared to a laser system working at 1 kHz. So far, the limiting factor is the data processing and the movement of the mechanical delay stage. Nevertheless, the new shot-to-shot detection has the potential to shorten the measurement time up to a factor of 100. The data quality is improved by a factor of three when the hitherto conventional averaging scheme is compared to shot-to-shot acquisition for the same number of laser pulses. The expansion of shot-to-shot data acquisition for high repetition rates will allow studies on sensitive samples as exposure times can strongly be reduced to achieve the same signal-to-noise ratio. In addition, multidimensional spectroscopy can also be extended to high-repetition shot-to-shot readout allowing an efficient recording of data. Therefore, in future experiments, dynamics and couplings in sensitive samples and kinetic processes could be studied in more detail. Complex photophysical and photochemical phenomena are subject of many fields of research. Many of these multifaceted processes are not yet fully understood. Therefore, a possible approach is the elucidation of single reaction steps with the combination of transient absorption spectroscopy and a suitable, less complex model system. The systematic variation of the model system’s properties and environments, e.g., by chemical substitution or adequate choice of the solvent allows the determination of essential entities and reactivities thereof. Proper knowledge of an individual intermediate step and its determining factors can enhance the understanding of the complete photoreaction process. The application of transient absorption spectroscopy was shown for the optically-induced electron transfer in a series of donor–acceptor oligomers in Chapter 4. In general, the solvent relaxation times were isolated from the back-electron-transfer dynamics by a global lifetime analysis. For the smallest oligomeric structure where complete charge separation is possible, an ultrafast equilibration leads to charge recombination from the configuration showing the lowest barrier for recombination. The back-electron transfer strongly depends on the utilized solvent. Whereas in dichloromethane the back-electron transfer occurs with the maximum rate in the barrierless optimal region, the dynamics in toluene are governed by a Marcus inverted-region effect. The experimentally observed rates were also estimated by theoretical calculations of the respective barriers. The study did not only successfully unravel charge transfer in the oligomeric systems but also improved the understanding of the electron-transfer properties of larger polymers from an earlier study. Therefore, the combination of length variation and time-resolved spectroscopy is an important step towards the correct prediction of charge-carrier dynamics in macroscopic devices, e.g., for photovoltaics. The bond dissociation of a carbon-monoxide-releasing molecule in aqueous solution was studied in Chapter 5 as a prototype reaction for the photo-triggered breaking of a bond. It was shown that upon excitation only one carbon-monoxide ligand of the tricarbonyl complex is dissociated. A fraction of the photolyzed molecules restore the intact initial complex by geminate recombination within the temporal resolution of the experiment. However, the recombination could be detected by the hot ground-state infrared absorption of the complex. The detectable dicarbonyl formed upon CO release distributes excess energy from the absorbed photon into low-frequency modes which result in broadened absorption bands like for the recombined tricarbonyl. The free coordination site in the ligand sphere is filled with a solvent water molecule. Despite numerous studies of metal carbonyls studied in alkaneous solutions, the elucidation of the dynamics of a CORM in aqueous solution added another important detail to the photochemistry of this class of compounds. Experiments employing a second ultraviolet pump pulse did not trigger further CO dissociation and hence no formation of a monocarbonyl species; this might either be due to a different release mechanism without a further photochemical step or a strong spectral shift of the dicarbonyl’s absorption. Both reasons could explain why degenerate pump–repump–probe spectroscopy is inefficient. However, further experiments with ultraviolet probe pulses could substantiate whether the intermediate dicarbonyl reacts further photochemically or not. Apart from the model-system character of the CORM for bond dissociation, the study could determine exactly how many CO ligands are initially photolyzed off. Detailed knowledge of the release mechanism will affect the previous use and application as well as the further development of CORMs as therapeutic prodrugs to deliver high local concentrations of CO in cancerous or pathological tissue. Hence, the study of two-photon absorption properties which are important for in vivo applications of CORMs should be the main focus in further spectroscopic experiments. In Chapter 6, both abovementioned molecular phenomena—electron transfer and bond dissociation—were studied in combination. The photochemistry of a tetrazolium salt was studied in detail in a variety of different solvents. Being a relatively small molecule, the studied tetrazolium cation shows a multifaceted photochemistry and is therefore a textbook example for the combination of ultrafast molecular phenomena studied in different environments. Within femtoseconds, the tetrazolium ring is opened. The biradicalic species is then reduced via uptake of an electron from the solvent. The formation of the ring-open formazan photoproduct from this point of the reaction sequence on was excluded by experiments with acidic pH value of the solution. The ring-open radical is stabilized by ring-closure. The resulting tetrazolinyl radical was already observed in experiments with microsecond time resolution. However, its formation was observed in real time for the first time in this study. Irradiation of a tetrazoliumsalt solution yields different photoproduct distributions depending on the solvent. However, it was shown that all photoproducts have a tetrazolinyl radical as a common precursor on an ultrafast time scale. In combination with studies from the literature, the complete photochemical conversion of a tetrazolium salt was clarified in this study. Apart from the prototype character of the reaction sequence, the reaction mechanism will have impact on research associated with life science where tetrazolium assays are used on a daily basis without taking into account of photochemical conversion of the indicating tetrazolium ion and its photochemically formed reactive intermediates. On the basis of the tetrazolium-ion photochemistry, the rich photochemistry of the formazan photoproduct, including structural rearrangements and subsequent reformation of the tetrazolium ion, might be the subject of future studies. This thesis shows a method advancement and application of transient absorption spectroscopy to exemplary molecular model systems. The insights into each respective field did not only enlighten singular aspects, but have to be seen in a much larger context. Understanding complex photoinduced processes bottom-up by learning about their constituting steps—microscopically and on an ultrafast time scale—is an ideal method to approach understanding and prediction of phenomena in large molecular systems like biological or artificial architectures as for example used in photosynthetic light-harvesting and photovoltaics. N2 - Photoinduzierte Prozesse werden heutzutage mit einer Vielzahl spektroskopischer Methoden untersucht. In der flüssigen Phase ist die transiente Absorptionsspektroskopie die wohl vielfältigst verwendete Anrege-Abfrage-Technik um lichtinduzierte molekulare Phänomene zu untersuchen. In vielen Forschungsgruppen ist die zeitaufgelöste optische Spektroskopie eine etablierte Methode und wird bezüglich vieler technischer Aspekte weiterentwickelt. Dennoch ist das volle Potential der für die Untersuchung photoempfindlicher Proben und die Beobachtung schneller makroskopischer Prozesse notwendigen Verkürzung der Datenaufnahmezeit, erreichbar mit hohen Laserwiederholraten und Schuss-zu-Schuss-Detektion, noch nicht vollständig ausgeschöpft worden. Die Schuss-zu-Schuss-Detektion ist insbesondere aufgrund der hohen Korrelation aufeinanderfolgender Laserpulse vorteilhaft. Die Entwicklung und technische Umsetzung der breitbandigen Schuss-zu-Schuss-Datenaufnahme mit 100 kHz wurde in Kapitel 3 vorgestellt. An einem bekannten Laserfarbstoff als Referenzsystem wurden zum ersten Mal Dynamiken des angeregten Zustands mit breitbandiger Schuss-zu-Schuss-Detektion mit 100 kHz gemessen. Durch eine Analyse sowohl der Rauschcharakteristika des verwendeten Lasersystems als auch der Korrelation aufeinanderfolgender Pulse konnten die Vorzüge der Schuss-zu-Schuss-Datenaufnahme quantitativ bestimmt werden. In der verwendeten Softwareumgebung konnte die Messzeit, verglichen mit einem Lasersystem mit einer Wiederholrate von 1 kHz, um mindestens einen Faktor drei beschleunigt werden. Zum jetzigen Zeitpunkt sind die Datenverarbeitung und das Verfahren des mechanischen Lineartisches zur Zeitverzögerung die limitierenden Faktoren der Messzeitverkürzung. Dennoch hat die neue Schuss-zu-Schuss-Detektion das Potential die Messzeit um einen Faktor bis zu 100 zu verkürzen. Die Datenqualität wurde um einen Faktor drei verbessert, wenn das bisher verwendete konventionelle Mittelungsverfahren mit der Schuss-zu-Schuss-Aufnahme für die gleiche Anzahl an Laserpulsen verglichen wird. Die Ausweitung der Schuss-zu-Schuss-Datenaufnahme für hohe Wiederholraten wird die Untersuchung empfindlicher Proben erlauben, da die Belichtungszeit zur Erreichung desselben Signal-zu-Rausch-Verhältnisses stark reduziert werden kann. Des Weiteren kann das Schuss-zu-Schuss-Auslesen auf die multidimensionale Spektroskopie ausgeweitet werden, was auch hier eine effiziente Datenaufnahme erlaubt. Aufgrund dessen werden in künftigen Experimenten Dynamiken und Kopplungen in empfindlichen Proben und kinetischen Prozessen genauer untersucht werden können. Komplexe photophysikalische und photochemische Phänomene sind Gegenstand vieler Forschungsgebiete. Etliche dieser vielschichtigen Prozesse sind noch nicht gänzlich verstanden. Eine mögliche Herangehensweise an dieses Problem ist die Aufklärung einzelner Reaktionsschritte mittels der Kombination von transienter Absorptionsspektroskopie mit geeigneten, weniger komplexen Modellsystemen. Die systematische Änderung der Eigenschaften und Umgebungen der Modellsysteme, beispielsweise durch chemische Substitution oder die Wahl eines geeigneten Lösungsmittels, erlaubt die Bestimmung wesentlicher Bestandteile und deren Reaktivitäten. Fundierte Kenntnis einzelner Zwischenschritte und deren bestimmende Faktoren können das Verständnis des lichtinduzierten Gesamtprozesses verbessern. Die Anwendung der transienten Absorptionsspektroskopie auf den optisch-induzierten Elektronentransfer in einer Reihe von Donor-Akzeptor-Oligomeren wurde in Kapitel 4 gezeigt. Durch globale Datenanalyse wurden die Relaxationszeiten des Lösungsmittels von den Raten des Elektronenrücktransfers getrennt. In der kleinsten oligomeren Struktur welche eine vollständige Ladungstrennung erlaubt, führt eine ultraschnelle Gleichgewichtseinstellung zur Ladungsrekombination in der Konfiguration mit der kleinsten Rekombinationsbarriere. Der Elektronenrücktransfer hängt stark vom verwendeten Lösungsmittel ab. Während der Elektronenrücktransfer in Dichlormethan mit der maximalen Rate in der optimalen Region ohne Barriere stattfindet, ist die Dynamik in Toluol vom Effekt der Marcus-invertierten Region bestimmt. Die experimentell beobachteten Raten wurden durch theoretische Berechnung der jeweiligen Barrieren abgeschätzt. Diese Arbeit hat nicht nur erfolgreich den Ladungstransfer in den oligomeren System entschlüsselt, sondern auch das Verständnis der Elektronentransfereigenschaften größerer Polymere aus vorherigen Studien erweitert. Aus diesem Grund ist die Kombination der Längenvariation mit der zeitaufgelösten Spektroskopie ein wichtiger Schritt in Richtung der korrekten Vorhersage von Ladungsträgerdynamiken in makroskopischen Bauteilen, wie sie beispielsweise in der Photovoltaik verwendet werden. Die Bindungsdissoziation eines Kohlenmonoxid-freisetzenden Moleküls (CORM) in wässriger Lösung wurde in Kapitel 5 als prototypische Reaktion für die lichtinduzierte Spaltung einer Bindung untersucht. Es konnte gezeigt werden, dass nach Anregung nur ein Kohlenmonoxid-Ligand des Tricarbonyl-Komplexes abgespalten wird. Ein Teil der photolysierten Moleküle stellt den intakten Anfangskomplex durch paarweise Rekombination innerhalb der Zeitauflösung des Experiments wieder her. Dennoch konnte die paarweise Rekombination durch die Grundzustandsabsorption des schwingungsangeregten Komplexes im Infraroten detektiert werden. Das nach CO-Freisetzung beobachtete Dicarbonyl verteilt die Überschussenergie des absorbierten Photons auf Schwingungsmoden niedriger Frequenz, was zum Auftreten verbreiterter Absorptionsbanden f¨uhrt. Die freie Koordinationsstelle in der Ligandensphäre wird mit einem Wassermolekül aufgefüllt. Trotz zahlreicher Studien zu Metallcarbonylen in alkanischen Lösungsmitteln fügt die Aufklärung der Dynamiken des CORMs in wässriger Lösung ein wichtiges Detail der Photochemie dieser Verbindungsklasse hinzu. Experimente mit einem zweiten ultravioletten Anregepuls lösten keine weitere CO-Freisetzung und somit keine Bildung einer Monocarbonyl-Spezies aus. Der Grund hierfür mag entweder ein anderer Freisetzungsmechanismus ohne weiteren photochemischen Schritt oder eine große spektrale Verschiebung der Absorption des Dicarbonyls sein. Beide Gründe erklären, warum die Anrege-Wiederanrege-Abfrage-Spektroskopie keinen Effekt zeigt. Jedoch könnten weitere Experimente mit ultravioletten Abfragepulsen ergründen, ob das Dicarbonylintermediat photochemisch weiterreagiert oder nicht. Abgesehen vom Modellsystem-Charakter des CORMs für die Bindungsdissoziation konnte diese Untersuchung bestimmen, wie viele CO-Liganden ursprünglich freigesetzt werden. Die genaue Kenntnis des Freisetzungsmechanismus wird die bisherige Benutzung und Anwendung, sowie die zukünftige Entwicklung der CORMs als therapeutische Vorstufe zur Verabreichung hoher lokaler Konzentrationen an CO in karzinogenem und pathologischem Gewebe beeinflussen. Daher sollte die Untersuchung der Zweiphotonenabsorptionseigenschaften, welche für die in vivo Anwendung von CORMs eine wichtige Rolle spielen, in zukünftigen spektroskopischen Experimenten in den Vordergrund rücken. In Kapitel 6 wurde eine Kombination aus beiden oben erwähnten molekularen Phänomenen, Elektronentransfer und Bindungsspaltung, untersucht. Die Photochemie eines Tetrazoliumsalzes wurde detailliert in einer Auswahl unterschiedlicher Lösungsmittel untersucht. Als relativ kleines Molekül zeigt das untersuchte Tetrazoliumkation eine vielfältige Photochemie und ist daher ein Paradebeispiel für die Untersuchung kombinierter ultraschneller Phänomene in unterschiedlichen Umgebungen. Innerhalb von Femtosekunden wird der Tetrazoliumring geöffnet. Die biradikalische Spezies wird dann durch Elektronenaufnahme aus dem Lösungsmittel reduziert. Die Bildung des ringoffenen Formazan-Photoprodukts an dieser Stelle der Reaktionssequenz wurde durch Experimente in saurer Lösung ausgeschlossen. Das ringoffene Radikal wird durch einen Ringschluss stabilisiert. Das daraus entstehende Tetrazolinyl-Radikal wurde bereits in Experimenten mit Mikrosekundenzeitauflösung beobachtet. Die Bildung in Echtzeit wurde jedoch in dieser Arbeit zum ersten Mal beobachtet. Die Beleuchtung einer Tetrazoliumsalzlösung führt in Abhängigkeit des Lösungsmittels zu unterschiedlichen Photoproduktverteilungen. Auf einer ultraschnellen Zeitskala haben indessen alle Photoprodukte das Tetrazolinyl-Radikal als gemeinsame Vorstufe. In Verbindung mit literaturbekannten Studien wurde in dieser Arbeit die gesamte photochemische Umsetzung eines Tetrazoliumsalzes aufgeklärt. Abgesehen von dem prototypischen Charakter der Reaktionssequenz wird der entschlüsselte Reaktionsmechanismus Einfluss auf die Forschung in den Lebenswissenschaften haben, in welchen Tetrazoliumsalz-basierte Prüfverfahren täglich zur Anwendung kommen, wobei bislang die photochemische Umsetzung und die photochemisch gebildeten reaktiven Intermediate außer Acht gelassen werden. Auf Grundlage der Photochemie des Tetrazoliumions kann die vielschichtige Photochemie des Formazan-Photoprodukts, welche Umlagerungen und erneute Bildung des Tetrazoliumions beinhaltet, Gegenstand zukünftiger Untersuchungen sein. Diese Arbeit stellt die Methodenverbesserung und Anwendung der transienten Absorptionsspektroskopie auf beispielhafte Modellsysteme vor. Die Einblicke in die jeweiligen Forschungsgebiete beleuchteten nicht nur einzelne Aspekte, sondern müssen in einem wesentlich größeren Zusammenhang gesehen werden. In großen molekularen Systemen wie biologischen oder künstlichen Architekturen, welche beispielsweise in photosynthetischen Lichtsammelkomplexen und der Photovoltaik Anwendung finden, kann man sich dem grundsätzlichen Verständnis komplexer photoinduzierter Vorgänge und deren Vorhersage durch Untersuchung der zugrundeliegenden Teilschritte – mikroskopisch und auf ultraschnellen Zeitskalen – annähern. KW - Ultrakurzzeitspektroskopie KW - Pump-Probe-Technik KW - Fotochemie KW - Reaktionsmechanismus KW - Transient Absorption Spectroscopy KW - Femtosecond Spectroscopy KW - Femtochemistry KW - Molecular Phenomena KW - Transiente Absorptionsspektroskopie KW - Femtosekundenspektroskopie KW - Femtochemie KW - Molekulare Phänomene Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-118771 ER - TY - THES A1 - Gerbich, Thiemo M. P. T1 - Pikosekunden-zeitaufgelöste Deaktivierungsprozesse in isolierten Molekülen - Fluorenon, NDCA, Me-NI und NTCDA T1 - Picosecond time-resolved deactivation processes in isolated molecules - Fluorenone, NDCA, Me-NI and NTCDA N2 - Im Rahmen der vorliegenden Dissertation wurden die Dynamiken von strahlungslosen Deaktivierungsprozessen von vier verschiedenen Molekülen im elektronisch angeregten Zustand untersucht. Ein fundiertes Verständnis der intramolekularen Energieumverteilung in isolierten pi-konjugierten Systemen ist neben dem Modellcharakter auch für Anwendungen in der organischen Elektronik von Interesse. Die Untersuchungen dienen zudem als optimaler Maßstab für theoretische Simulationen, die auf eine Nachbildung der molekularen Dynamik ausgerichtet sind. Die Inbetriebnahme des Pikosekunden-Lasersystems stellt in der Arbeitsgruppe ein großes Potential für die Untersuchung der Dynamik von isolierten pi-konjugierten Molekülen zur Verfügung. Erste Experimente konnten an unterschiedlichen Heterocyclen mit interessantem zeitlichen Verhalten erfolgreich durchgeführt werden und lieferten bereits wichtige Erkenntnisse über die strahlungslose Deaktivierung auf der ps-Zeitskala. Selbst für große Moleküle mit geringem Dampfdruck, die nur mit hohem experimentellen Aufwand im isolierten Zustand charakterisierbar sind, konnten Relaxationszeiten der angeregten Zustände ermittelt werden. Der Fokus der einzelnen Studien lag in der Erforschung der isolierten Moleküle, welche durch Anwendung der Molekularstrahl-Technik mit zeitaufgelöster REMPI-Spektroskopie anhand des ps-Systems untersucht werden sollten. Zur Kontrolle der experimentellen Ergebnisse wurden zudem Vergleichsmessungen der transienten Absorptionsspektroskopie (TA) in der Flüssigphase herangezogen, wodurch eine fundierte Interpretation der Dynamik möglich wurde. Zu den wichtigen Zielen gehörten jedoch die Vergleiche der experimentellen Ergebnisse von isolierten Molekülen mit Berechnungen der Zustandsenergien sowie Simulationen der Moleküldynamik aus dem Theorie-Arbeitskreis von Prof. Mitric. Auf diese Weise konnten wichtige Erkenntnisse über die Dynamik der Deaktivierungsprozesse gewonnen werden. Die Kombination der Gasphasen-Experimente mit TA-Messungen in der Flüssigphase hat sich als besonders nützlich erwiesen, um bei mehrstufigen Deaktivierungsprozessen einen erweiterten Einblick in die Dynamik der Moleküle zu erhalten. - So konnte bei Fluorenon in Cyclohexan und Acetonitril durch Vergleich der Anregungen des S3- und S1-Zustands eine zusätzliche Zeitkonstante von 8-16 ps beobachtet werden, welche die innere Umwandlung zum S1-Zustand dokumentiert und die Ergebnisse der Gasphasen-Messungen bestätigt. - Durch Verwendung von Lösungsmitteln unterschiedlicher Polarität und der damit verbundenen Verschiebung der elektronischen Zustände von Fluorenon konnte zudem der zweite Deaktivierungsprozess eindeutig einem ISC-Prozess mit Zeitkonstanten von 120-154 ps zugeordnet werden. In der Gasphase wurde dieser Prozess lediglich als langlebiger Offset wahrgenommen. - Unterschiedliche Anregungsenergien zeigten bei TA-Messungen von NDCA eine nahezu identische Moleküldynamik mit ca. 200 ps, während für isoliertes NDCA ein starker Abfall der Lebensdauer mit zunehmender Schwingungsenergie beobachtet wurde. In der Gasphase wird somit von einer Deaktivierung über eine Energiebarriere ausgegangen, während in Lösung eine zu schnelle Abkühlung durch Schwingungsrelaxation diesen Prozess verhindert. - Bei NTCDA konnten in den TA-Messungen nach Anregung des S1-Zustands eine Relaxation in die Triplett-Umgebung innerhalb von wenigen Pikosekunden beobachtet werden, was im Einklang mit der sehr schnellen Deaktivierung in der Gasphase betrachtet werden kann. Eine ausführliche Vergleichsstudie von isolierten Molekülen mit computergestützten Rechnungen und Simulationen wurde für die Moleküle NDCA und Me-NI durchgeführt. Dabei wurde explizit auf den Einfluss von Spin-Bahn-Kopplungen und konischen Durchschneidungen eingegangen, welche zu konkurrierenden Deaktivierungsprozessen des S1-Zustands führen können. - Durch Simulationen der Surface-Hopping-Dynamik wurde deutlich, dass bei NDCA und Me-NI im ersten angeregten Zustand eine konische Durchschneidung (CI) zwischen dem S1- und S0-Zustand erreicht werden kann. - Während die Dynamik von NDCA bei höherer Schwingungsanregung stark durch die CI dominiert wird, spielt die direkte Relaxation in den elektronischen Grundzustand bei Me-NI offenbar keine Rolle. - In Abwesenheit der CI zeigen NDCA und Me-NI in einer mit Spin-Bahn-Kopplung erweiterten Simulation der Populationsdynamik einen signifikanten Populationstransfer in die Triplett-Umgebung (T1-T4). Eine innere Umwandlung in den Grundzustand konnte jedoch nur bei Erreichen der CI beobachtet werden. Eine weitere Verbesserung der ps-Experimente kann durch Aufbau eines Photoelektronen-Spektrometers erreicht werden, da durch diese Technik eine präzisere Aussage darüber getroffen werden kann, aus welchem elektronischen Zustand die Moleküle ionisiert wurden. Eine Unterscheidung von ISC- und IC-Prozessen könnte somit gewährleistet werden. N2 - In this thesis the dynamics of radiationless deactivation of electronic excited states of four different molecules were investigated. A solid understanding of the intramolecular energy redistribution in excited isolated pi-conjugated molecules becomes increasingly important for applications of organic electronics and additionally is a key to understand molecular models. Such studies serve as benchmarks for computational studies for accurately simulating the molecular dynamics. The new ps laser system offers a great potential for experiments on the dynamics of isolated pi-conjugated molecules. Isolated molecules were examined by applying the molecular beam technique in combination with time-resolved REMPI spectroscopy. First experiments on several heterocycles were carried out, providing important insights on the radiationless deactivation on a ps time scale. Despite experimental difficulties in the characterization of isolated large molecules with very low vapor pressure, relaxation time constants of their excited states could be obtained. To verify the experimental results additional measurements of transient absorption spectroscopy (TA) in solution were carried out for comparison, enabling a solid interpretation of the dynamics. However, one of the main objectives was to compare the experimental results of the isolated molecules with calculated excitation energies and simulations of the molecular dynamics provided by the theoretical working group of Prof. Mitric. In this manner, important insights into the dynamics of deactivation processes could be obtained. The combination of gas phase experiments and solution phase TA measurements has provided improved insight in the molecular dynamics in the case of multistage deactivation processes, as emphasized by the following examples. - By comparing the dynamics of the S3 and S1 states of fluorenone in solution a time constant of 8 – 16 ps could be observed which is only present after excitation in the S3 state. This lifetime represents the internal conversion into the S1 state and validates the results of the gas phase measurements. - Using solutions with different polarities related in a shift of the electronic excited states of fluorenone, which could be utilized to assign time constants of 120 - 154 ps to an intersystem crossing. In the gas phase the corresponding process could only be perceived as a long-living offset. - TA measurements of NDCA in solution with different excitation energies showed nearly identically dynamics, while a sharp drop of the lifetimes was observed in the gas phase when increasing the vibrational energy. This process is associated with a deactivation over an energy barrier while it is prevented in solution due to rapid cooling by vibrational relaxation. - After excitation into the S1 state of NTCDA the TA measurements yielded a fast relaxation in the triplet manifold within a few picoseconds. This observation is in accordance with the fast time constants of the gas phase experiments. A detailed comparative study of isolated molecules and computational calculations and simulations was carried out for NDCA and Me-NI. The influence of spin-orbit couplings and conical intersections (CI) and the associated competition of different deactivation channels in the S1 state were discussed thoroughly. The main results are depicted in the following. - Surface hopping dynamics simulations for NDCA and Me-NI showed the presence of a conical intersection between the S1 and the S0 state which can be reached from the first excited singlet state. - While for higher vibrational excitation the dynamics of NDCA is strongly dominated by the CI, a direct relaxation into the electronic ground state is apparently not relevant for Me-NI. - Simulating the population dynamics in absence of the CI, a significant population transfer into the triplet manifold (T1-T4) could be observed for both NDCA and Me-NI. A deactivation into the electronic ground state via internal conversion could only be observed when the CI was present. Further improvements of the ps experiments could be achieved by constructing a photoelectron spectrometer, which allows more detailed information about the type of the electronic states. Thus it would be possible to distinguish between ISC and IC processes. KW - REMPI KW - Molekulardynamik KW - Strahlungsloser Übergang KW - Abstimmbarer Laser KW - konische Durchschneidung KW - innere Umwandlung KW - Intersystem Crossing KW - isolierte Moleküle Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-118654 ER - TY - THES A1 - Settels, Volker T1 - Quantum chemical description of ultrafast exciton self-trapping in perylene based materials T1 - Quanten-chemische Beschreibung von ultraschnellem Self-trapping von Exzitonen in Perylen-basierten Materialien N2 - Im Rahmen dieser Dissertation wurden sehr lange Exzitonen-Diffusionslängen (LD) unter idealen Bedingungen für Perylen-basierte Materialien simuliert. Dies ist ein Indiz dafür, dass die sehr kurzen LD in realen Materialien aus einer extrinsischen sowie einer intrinsischen Immobilisierung resultieren. Letztere basiert auf einer Relaxation in sogenannten „Self-Trapping“-Zustände. Ein tieferes Verständnis der dem Self-Trapping zugrunde liegenden atomistischen Prozesse ist notwendig, um zukünftig Materialien mit langen LD entwickeln zu können, bei denen eine intrinsische Exzitonen-Immobilisierung verhindert wird. Für die Entwicklung eines solchen mechanistischen Verständnisses ist das Vorliegen einer eindeutigen Korrelation zwischen der molekularen Anordnung und der LD unabdingbar. Diese weisen Einkristalle von Diindenoperylen (DIP) und α-Perylen-tetracarboxyl-anhydrid (α-PTCDA) auf. Bei ersteren wurde eine außergewöhnlich lange LD von 90 nm und bei letzteren nur 22 nm gemessen. Teil dieser Arbeit war es, Gründe für diesen Unterschied in der LD zu finden. Nur Self-Trapping kommt als Ursache in Frage. Aus diesem Grund eignen sich diese Materialien, um ein atomistisches Verständnis des Self-Trappings exemplarisch an ihnen zu erarbeiten. Mutmaßlich könnten Differenzen in der elektronischen Struktur in DIP und α-PTCDA für das unterschiedliche Self-Trapping verantwortlich sein. Allerdings konnte gezeigt werden, dass es für viele Perylen-basierte Materialien keine signifikanten Unterschiede in der elektronischen Struktur gibt, wodurch diese für die Aufklärung von Immobilisierungsmechanismen zu vernachlässigen sind. Eine weitere mögliche Begründung wäre in Polarisationseffekten im Kristall zu suchen, welche die elektronische Struktur in Perylen-basierten Materialien unterschiedlich beeinflussen. Vor allem ihr Einfluss auf Ladungstrennungs-Zustände (CT), die oberhalb des optisch hellen Frenkel-Zustandes liegen, war fraglich, weil sie energetisch abgesenkt werden könnten. Ein signifikanter Einfluss von Polarisationseffekten konnte aber für alle Zustände mittels eines polarisierbaren Kontinuum-Modells ausgeschlossen werden. Die geringe LD im α-PTCDA ist folglich ein Indiz für ein Self-Trapping, das durch die Kristallstruktur aus π-Stapeln evoziert wird, welche in DIP fischgrätenartig ist. Da Polarisationseffekte auszuschließen sind, übt der Kristall lediglich durch sterische Restriktionen einen Einfluss auf das Dimer aus. Daher muss die Methode für die Beschreibung von Self-Trapping nur diese Effekte berücksichtigen, so dass sich für den Einsatz des mechanical embedding QM/MM-Ansatzes entschieden wurde. Nun konnten Potentialflächen berechnet werden, auf denen anschließend eine Wellenpaketdynamik durchgeführt wurde. Diese Methode erlaubt es erstmals, Mechanismen der Exzitonen-Immobilisierung in organischen Materialien auf einer atomistischen Ebene zu beschreiben. Als Erklärung für Self-Trapping in α-PTCDA dienten Potentialflächen, die eine intermolekulare Verschiebung des Dimers im Kristall abbilden. So wurde eine Exzitonen-Immobilisierung innerhalb von 500 fs gefunden, die aus einem irreversiblem Energieverlust und einer lokalen Verzerrung der Kristallstruktur resultiert und auf diese Weise den weiteren Transport des Exzitons verhindert. Im Fall von DIP kann diese Immobilisierung aufgrund hoher Energiebarrieren nicht stattfinden. Diese Barrieren resultieren aus der fischgrätenartigen Kristallstruktur des DIP. Diese Diskrepanzen in der Dynamik erklären die unterschiedlichen LD-Werte für DIP und α-PTCDA. In einem weiteren Fall wurde eine Exzitonen-Immobilisierung in helikalen π Aggregaten von Perylen-tetracarboxyl-bisimid (PBI) Molekülen festgestellt. Hier wird Self-Trapping durch einen Relaxationsmechanismus verursacht, in dem das Exziton durch geringe asymmetrische Schwingungen des Aggregats innerhalb von 200 fs von dem hellen Frenkel- in den dunklen Frenkel-Zustand transferiert wird, wobei dieser Übergang von einem CT-Zustand vermittelt wird. Der gesamte Vorgang ist nur bei helikalen Aggregaten möglich, weil nur hier CT-Zustände sehr dicht bei dem hellen Frenkel-Zustand vorhanden sind. Im finalen Frenkel-Zustand tritt eine Torsionsbewegung um die π-Stapelachse ein, so dass ein Energieverlust und eine lokale Änderung der Aggregatstruktur erfolgt – also ein Self-Trapping des Exzitons. Dieser modellierte Mechanismus steht im Einklang zu allen vorliegenden experimentellen Daten. Diese Erkenntnisse lassen die Schlussfolgerung zu, dass in künftigen Materialen für organische Solarzellen eine irreversible und ultraschnelle Deformation des Aggregats nach der Photoanregung vermieden werden muss - will man lange LD erreichen. Nur so kann Self-Trapping von Exzitonen verhindert werden. N2 - In the context of this dissertation very long ranged exciton diffusion lengths (LD) were simulated for perylene-based materials under ideal conditions. This leads to the conclusion that the short LD values in existing materials result from an extrinsic and intrinsic immobilization. The latter, which is a specific material property, is based on a relaxation of the exciton into self-trapping states. An in-depth understanding of the atomistic processes defining self-trapping is essential to developing materials with long LD in the future, in which intrinsic immobilization is prevented. For the development of such a mechanistic understanding it is crucial that a clear relationship between molecular structure and LD is available. This is given by single crystals of diindeno perylene (DIP) and α-perylene tetracarboxylic anhydride (α-PTCDA). An extraordinary large LD of 90 nm was measured for the first one, while the latter possesses only 22 nm. Part of this thesis was to deliver reasons for this discrepancy. Only self-trapping comes into question to explain the different LD values. One reason for the different self-trapping in DIP and α-PTCDA could lie in the electronic structure. However, it was possible to demonstrate that a wide range of perylene-based materials possess no significant differences in their electronic structures. Consequently, such differences can be neglected for the explanation of immobilization mechanisms for the exciton. A further possible explanation could be polarization effects in the crystal, which influences the electronic structure of perylene based materials differently. Especially their influence on charge transfer (CT) states, which are located above the optically bright Frenkel state, was in question because such states could be stabilized by a polarizable surrounding. A significant influence of polarization effects on all considered states were excluded by using a polarizable continuum model. Hence, the small LD values in α-PTCDA are an evidence for self-trapping, which produces a crystal structure built up by π-stacks, while the one of DIP is of herringbone type. Since polarization effects can be neglected, is the dimer only via steric restrictions influenced by the crystal. Hence, a method describing self-trapping has to consider such effects, so that a mechanical embedding QM/MM approach is sufficient. Now, potential energy surfaces were calculated, on which wave packet dynamics were subsequently performed. In this way, atomistic mechanisms for the immobilization of excitons were described for the first time in organic materials. Self-trapping was studied in crystals of α-PTCDA by potential energy surfaces, which map an intermolecular shift motion of the dimer in the crystal. An immobilization of excitons occurs within 500 fs, which results from an irreversible energy loss together with a local deformation of the crystal lattice. This prevents a further transport of the exciton. In the case of DIP, this immobilization does not proceed due to high barriers. These barriers result from the herringbone type packing motif in the DIP crystal. This discrepancy in the dynamics explains the different LD values in DIP and α-PTCDA. In a further example, an exciton immobilization was found in helical π-aggregates of perylene tetracarboxylic bisimide (PBI) molecules. Self-trapping is caused by a relaxation mechanism, in which the exciton is transferred by asymmetric vibrations of the aggregate from the bright to a dark Frenkel state within 200 fs, whereby the transition is mediated by a CT state. However, the CT state is almost non-populated during the whole mechanism so that its participation could not yet be proven experimentally. This entire procedure is solely possible in helical aggregates, because only for such structures is there a CT state located next to the bright Frenkel state. At the final Frenkel state a torsional motion around the π-stacking axis is possible so that the loss in energy and the local rearrangement of the aggregate structure occurs, which means a self-trapping of the exciton. This mechanism is in perfect agreement with all available experimental data. These insights allow the conclusion that in future materials for organic solar cells an irreversible and ultrafast deformation of aggregates after photo-absorption must be avoided. Only in this way long LD values can be achieved and exciton self-trapping can be prevented. However, small LD values are always predicted in helical aggregates of perylene-based materials, because exciton immobilization occurs already due to small molecular motions. For this reason such aggregates are inappropriate for the use in organic solar cells. Long LD values are expected for aggregate structures with long intermolecular shifts or molecules with bulky substituents. KW - Exziton KW - Quantenchemie KW - Angeregter Zustand KW - Self-Trapping KW - CC2 KW - exciton KW - self-trapping KW - quantum chemistry KW - excited state KW - Perylenderivate Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69861 ER - TY - THES A1 - Paasche, Alexander T1 - Mechanistic Insights into SARS Coronavirus Main Protease by Computational Chemistry Methods T1 - Mechanistische Einblicke in die SARS Coronavirus Hauptprotease mit computerchemischen Methoden N2 - The SARS virus is the etiological agent of the severe acute respiratory syndrome, a deadly disease that caused more than 700 causalities in 2003. One of its viral proteins, the SARS coronavirus main protease, is considered as a potential drug target and represents an important model system for other coronaviruses. Despite extensive knowledge about this enzyme, it still lacks an effective anti-viral drug. Furthermore, it possesses some unusual features related to its active-site region. This work gives atomistic insights into the SARS coronavirus main protease and tries to reveal mechanistic aspects that control catalysis and inhibition. Thereby, it applies state-of-the-art computational methods to develop models for this enzyme that are capable to reproduce and interpreting the experimental observations. The theoretical investigations are elaborated over four main fields that assess the accuracy of the used methods, and employ them to understand the function of the active-site region, the inhibition mechanism, and the ligand binding. The testing of different quantum chemical methods reveals that their performance depends partly on the employed model. This can be a gas phase description, a continuum solvent model, or a hybrid QM/MM approach. The latter represents the preferred method for the atomistic modeling of biochemical reactions. A benchmarking uncovers some serious problems for semi-empirical methods when applied in proton transfer reactions. To understand substrate cleavage and inhibition of SARS coronavirus main protease, proton transfer reactions between the Cys/His catalytic dyad are calculated. Results show that the switching between neutral and zwitterionic state plays a central role for both mechanisms. It is demonstrated that this electrostatic trigger is remarkably influenced by substrate binding. Whereas the occupation of the active-site by the substrate leads to a fostered zwitterion formation, the inhibitor binding does not mimic this effect for the employed example. The underlying reason is related to the coverage of the active-site by the ligand, which gives new implications for rational improvements of inhibitors. More detailed insights into reversible and irreversible inhibition are derived from in silico screenings for the class of Michael acceptors that follow a conjugated addition reaction. From the comparison of several substitution patterns it becomes obvious that different inhibitor warheads follow different mechanisms. Nevertheless, the initial formation of a zwitterionic catalytic dyad is found as a common precondition for all inhibition reactions. Finally, non-covalent inhibitor binding is investigated for the case of SARS coranavirus main protease in complex with the inhibitor TS174. A novel workflow is developed that includes an interplay between theory and experiment in terms of molecular dynamic simulation, tabu search, and X-ray structure refinement. The results show that inhibitor binding is possible for multiple poses and stereoisomers of TS174. N2 - Das Schwere Akute Respiratorische Syndrom (SARS) wird durch eine Infektion mit dem SARS Virus ausgelöst, dessen weltweite Verbreitung 2003 zu über 700 Todesfällen führte. Die SARS Coronavirus Hauptprotease stellt ein mögliches Wirkstoffziel zur Behandlung dar und hat Modellcharakter für andere Coronaviren. Trotz intensiver Forschung sind bis heute keine effektiven Wirkstoffe gegen SARS verfügbar. Die vorliegende Arbeit gibt Einblicke in die mechanistischen Aspekte der Enzymkatalyse und Inhibierung der SARS Coronavirus Hauptprotease. Hierzu werden moderne computerchemische Methoden angewandt, die mittels atomistischer Modelle experimentelle Ergebnisse qualitativ reproduzieren und interpretieren können. Im Zuge der durchgeführten theoretischen Arbeiten wird zunächst eine Fehlereinschätzung der Methoden durchgeführt und diese nachfolgend auf Fragestellungen zur aktiven Tasche, dem Inhibierungsmechanismus und der Ligandenbindung angewandt. Die Einschätzung der quantenchemischen Methoden zeigt, dass deren Genauigkeit teilweise von der Umgebungsbeschreibung abhängt, welche als Gasphasen, Kontinuum, oder QM/MM Modell dargestellt werden kann. Letzteres gilt als Methode der Wahl für die atomistische Modellierung biochemischer Reaktionen. Die Vergleiche zeigen für semi-empirische Methoden gravierende Probleme bei der Beschreibung von Proton-Transfer Reaktionen auf. Diese wurden für die katalytische Cys/His Dyade betrachtet, um Einblicke in Substratspaltung und Inhibierung zu erhalten. Dem Wechsel zwischen neutralem und zwitterionischem Zustand konnte hierbei eine zentrale Bedeutung für beide Prozesse zugeordnet werden. Es zeigt sich, dass dieser „electrostatic trigger“ von der Substratbindung, nicht aber von der Inhibitorbindung beeinflusst wird. Folglich beschleunigt ausschließlich die Substratbindung die Zwitterionbildung, was im Zusammenhang mit der Abschirmung der aktiven Tasche durch den Liganden steht. Dies gibt Ansatzpunkte für die Verbesserung von Inhibitoren. Aus in silico screenings werden genauere Einblicke in die reversible und irreversible Inhibierung durch Michael-Akzeptor Verbindungen gewonnen. Es wird gezeigt, dass unterschiedlichen Substitutionsmustern unterschiedliche Reaktionsmechanismen in der konjugierten Additionsreaktion zugrunde liegen. Die vorangehende Bildung eines Cys-/His+ Zwitterions ist allerdings für alle Inhibierungsmechanismen eine notwendige Voraussetzung. Letztendlich wurde die nicht-kovalente Bindung eines Inhibitors am Beispiel des TS174-SARS Coronavirus Hauptprotease Komplexes untersucht. Im Zusammenspiel von Theorie und Experiment wurde ein Prozess, bestehend aus Molekulardynamik Simulation, Tabu Search und Röntgenstruktur Verfeinerung ausgearbeitet, der eine Interpretation der Bindungssituation von TS174 ermöglicht. Im Ergebnis zeigt sich, dass der Inhibitor gleichzeitig in mehreren Orientierungen, als auch in beiden stereoisomeren Formen im Komplex vorliegt. KW - SARS KW - Inhibitor KW - Enzym KW - Computational chemistry KW - Coronaviren KW - SARS KW - Protease KW - Mechanismus KW - Inhibitor KW - Computerchemie KW - SARS KW - protease KW - mechanism KW - inhibitor KW - computational chemistry Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-79029 ER - TY - THES A1 - Fischer, Kathrin Helena T1 - Analyse der chemischen Reaktionen ungesättigter Verbindungen mit FEL- und Synchrotronstrahlung T1 - Analysis of chemical reactions of unsaturated compounds with FEL and synchrotron radiation N2 - Brilliante Strahlungsquellen werden heute vielfach in der Forschung eingesetzt um Kristallstrukturen, Oberflächeneigenschaften oder Reaktionen zu untersuchen. Als Strahlungsquellen werden dafür bevorzugt Freie Elektronenlaser (FEL) oder Synchrotrons eingesetzt, da sie über weite Bereiche durchstimmbar sind und einen hohen Photonenfluss bereitstellen. Im Rahmen der vorliegenden Dissertation werden beide Lichtquellen verwendet um einerseits Isomere von Kohlenwasserstoffradikalen zu identifizieren und andererseits das Verhalten von Borylen und ungesättigten Verbindungen bei Photoionisation zu dokumentieren. Als erstes Experiment am FEL wurde ein IR-Spektrum von gasförmigen Allylradikalen aufgenommen. Das Allyl war ein Testlauf, da es als Kohlenwasserstoffradikal mit einer kleinen Dipolmomentänderung ein gutes Beispiel für ähnliche Verbindungen ist. Trotz der kleinen Änderung des Dipolmoments und der geringen Teilchendichte der Radikale in der Gasphase konnte ein gutes IR-Spektrum mit der IR-UV-Doppelresonanzmethode aufgenommen werden und die beobachteten Banden mit der Literatur zugeordnet werden. Das 3-Trifluoromethyl-3-Phenyl-carben (TFPC) wurde pyrolytisch aus 3-Trifluoromethyl-3-Phenyl-diazirin erzeugt. Dabei kam es beim Großteil der Carbene zu einer Umlagerung zu Trifluorstyrol. Neben dem Hauptprodukt Trifluorstyrol wurde das Triplett TFPC als Nebenprodukt identifiziert. Zusätzlich wurden die Isomerisierungsbarrieren für den Triplett- und Singulett-Übergangszustand berechnet. Die Radikale 1-Phenylpropargyl und 3-Phenylpropargyl sind anhand ihrer IR-Spektren unterscheidbar und lagern sich nicht ineinander oder in Indenyl um. Ausgehend von beiden Radikalen bilden sich die identischen Dimerisierungsprodukte im Massenkanal m/z = 230 (p-Terphenyl) und 228 (1-Phenylethinylnaphthalin (1PEN)). Außergewöhnlich war die Exklusivität dieser Produkte. Somit müssen deren Reaktionsmechanismen kinetisch viel schneller sein. Die Massen m/z = 230 und 228 waren bereits aus einer massenspektrometrischen Studie ausgehend von Benzol und Ethin bekannt, in der ihre Struktur jedoch nicht geklärt wurde. Somit müssen die gefundenen Dimerisierungsprodukte p-Terphenyl und 1PEN wichtige Intermediate bei der Entstehung von polyzyklischen aromatischen Kohlenwasserstoffen (PAK) und Ruß sein. Von gasförmigen NTCDA wurde mittels der TPEPICO-Methode am Synchrotron Schwellenphotoelektronenspektren aufgenommen. Dabei konnte die adiabatische Ionisierungsenergie (IE(ad)) zu 9.66 eV bestimmt werden. Weiterhin wurden noch fünf angeregte Zustände beobachtet, die mittels quantenmechanischer Berechnungen zugeordnet wurden. Es wurde die Photoionisation des Cycloheptatrienradikals (Tropyl) untersucht. Dabei wurde die erste Bande bei 6.23 eV der IE(ad) zugeordnet. Mit einer Franck-Condon Simulation wurden die beiden Schwingungsprogressionen einer CC-Streckschwingung (ν16+) und einer Kombination aus einer Ringatmung (ν2+) und ν16+ zugeordnet. Der erste Triplett- und Singulettzustand des angeregten Tropylkations konnte in Übereinstimmung mit der Literatur zugeordnet werden. Eine Schulter bei 9.85 eV und die intensivste Bande bei 11.6 eV konnten nicht eindeutig interpretiert werden. Neben dem Tropyl erscheint bei etwa 10.55 eV sein dissoziatives Zersetzungsprodukt, das Cyclopentadienylkation. Die IE(ad) des Borylenkomplex [(CO)5CrBN(SiMe3)2] wurde zu 7.1 eV bestimmt. Mit steigender Photonenenergie wurden alle CO-Liganden sequenziell abgespalten, während der Borligand auch bei 15 eV noch nicht dissoziierte. Von den fünf abgespaltenen CO-Liganden konnte die Auftrittsenergie bei 0 K unter Berücksichtigung der kinetischen Verschiebung gefittet werden. Durch einen einfachen thermodynamischen Zyklus wurden aus den Auftrittsenergien der Kationen die Bindungsenergien berechnet. Dabei zeigte sich, dass die zweite Bindungsenergie im Kation erheblich stärker ist als die erste. Dies deutet einen starken trans-Effekt des Borliganden an. In der Dissertation wurden die adiabatische Ionisierungsenergie der Moleküle sowie die Auftrittsenergien der Fragmente und die Bindungsenergien bestimmt. Zudem konnten Isomere anhand ihrer IR-Spektren unterschieden und ihre Dimerisierungsprodukte identifiziert werden. Damit wurden mit p-Terphenyl und 1PEN zwei weitere bedeutende Intermediate im Bildungsmechanismus von Ruß strukturell aufgeklärt. Die Beteiligung dieser Dimerisierungsprodukte am Bildungsmechanismus der PAK initiiert zukünftige Fragen. Was geschieht z.B. mit p-Terphenyl und 1PEN nach ihrer Bildung? Reagieren sie chemisch zu größeren Molekülen oder setzt bei ihnen bereits die Akkumulation zu Partikeln ein? Zusätzlich ist die Frage, ob Phenylpropargyl aus der Reaktion von Phenyl- und Propargylradikalen entsteht noch offen. Die erzielten Resultate haben einen wichtigen Schritt im Bildungsmechanismus der PAK identifiziert und damit die Grundlage für zukünftige Experimente gelegt. N2 - Brilliant light sources like free electron lasers (FEL) and synchrotrons can be used to investigate crystal structures, reactions, or surface properties. These light sources are applied due to their high photon flux and broad wavelength tunability. A free electron laser was employed in the presented work to identify isomers of hydrocarbon radicals and carbenes. By contrary, the photoionization properties of borylene and unsaturated radicals were observed using synchrotron radiation. The important results will be summarized in the following. The first experiment performed at the FEL facility was a test with allyl radicals. Allyl was a good test candidate for other hydrocarbon radicals due to its small change in the dipole moment and low density in the gas phase. Despite of the small change in the dipole moment and particle density a satisfying IR spectrum could be obtained with the IR-UV double resonance method and the observed bands were assigned according to literature. The 3-trifluoromethyl-3-phenyl-carbene (TFPC) was pyrolytically generated from 3-trifluoromethyl-3-phenyl-diazirine. A high percentage of the formed carbene rearranged to trifluorostyrene in the pyrolysis. In addition to the main product trifluorostyrene triplet TFPC was found as a minor product and identified by a comparison with computed IR spectra. Furthermore the barriers for the triplet and singlet transition state were calculated. As a last project with the FEL it was shown that the radicals 1-phenylpropargyl and 3-phenylpropargyl are distinguishable by IR spectroscopy and do not isomerize into each other or indenyl. Additionally, identical dimerisation products are formed in the observed mass channels m/z = 230 and 228, p-terphenyl and 1-phenylethynylnaphthalene (1PEN). This exclusive appearance of just one isomer in each mass channel instead of a broad variety was a striking discovery. Thus, their formation mechanism must be kinetical favored. Since the masses m/z = 230 and 228 were also found in a mass spectrometric study of benzene and acethylene, where their structures were not identified experimentally. The dimerization products p-terphenyl and 1PEN must be important intermediates in the soot formation. The first compound examined with synchrotron radiation was NTCDA. Its threshold photoelectron spectrum was recorded and analyzed applying the TPEPICO technique. The adiabatic ionization energy (IE(ad)) of NTCDA was determined as 9.66 eV. Five additional excited states were observed and assigned by quantum mechanical computations. In a similar project the IE(ad) of the cycloheptatienyl radical (tropyl) was identified to be 6.23 eV. With the help of a Franck-Condon simulation the two observed progressions were assigned to ν16+, a CC stretching and a combination of ν2+, an ringbreathing, and ν16+. Furthermore, the first excited triplet and singlet states were assigned according to literature. A shoulder at 9.85 eV might be the second triplet state or an excited vibration, while the most intense peak appears at 11.6 eV. A distinct assignment of the latter band was not possible employing computations. At approximately 10.55 eV the tropyl ion begins to photoionize dissociatively to form the cyclopentadienyl ion. This value is in good agreement with the appearance energy calculated using a thermochemical cycle. The IE(ad) of the borylene complex [(CO)5CrBN(SiMe3)2] was determined as 7.2 eV. With rising photon energy all five CO-ligands dissociate sequentially, while the boron ligand stays in place. Even at the highest measured energy value of 15 eV the boron ligand did not dissociate. The 0 K appearance energies of the fragments of this sequential CO loss were identified with a fitting procedure including the kinetic shift. Using a simple thermodynamic cycle the binding energies of the cationic complex were obtained. The higher second bond dissociation energy in comparison with the first one indicates a strong trans effect of the borylene ligand. Thermodynamic properties like the adiabatic ionization energy, the appearance energy of the fragments and binding energies were determined. Additionally, different isomers and their dimerization products were identified by their measured IR spectrum. With these experiments the structure of the dimerization products p-terphenyl and 1PEN, two important intermediates in soot formation, were resolved. These dimerization products initialize future questions: What will happen with p-terphenyl and 1PEN after their formation? Will they be involved in a subsequent chemical reaction or start to accumulate? These questions and whether the phenylpropargyl radicals are formed in a reaction of benzene with propargyl radicals should be answered in the future. The obtained results identified an important step in the mechanism of soot production and are the basis for further experiments. KW - Synchrotronstrahlung KW - Freie-Elektronen-Laser KW - Ungesättigte Verbindungen KW - Fotoionisation KW - synchrotron radiation KW - free electron laser KW - infrared KW - photoionization KW - gas phase KW - Fel KW - Infrarot KW - Photoionisation KW - Polycyclische Aromaten KW - Reaktive Zwischenstufe KW - Isomer KW - Gasphase Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-79108 ER - TY - JOUR A1 - Rewitz, Christian A1 - Keitzl, Thomas A1 - Tuchscherer, Philip A1 - Goetz, Sebastian A1 - Geisler, Peter A1 - Razinskas, Gary A1 - Hecht, Bert A1 - Brixner, Tobias T1 - Spectral-interference microscopy for characterization of functional plasmonic elements JF - Optics Express N2 - Plasmonic modes supported by noble-metal nanostructures offer strong subwavelength electric-field confinement and promise the realization of nanometer-scale integrated optical circuits with well-defined functionality. In order to measure the spectral and spatial response functions of such plasmonic elements, we combine a confocal microscope setup with spectral interferometry detection. The setup, data acquisition, and data evaluation are discussed in detail by means of exemplary experiments involving propagating plasmons transmitted through silver nanowires. By considering and experimentally calibrating any setup-inherent signal delay with an accuracy of 1 fs, we are able to extract correct timing information of propagating plasmons. The method can be applied, e.g., to determine the dispersion and group velocity of propagating plasmons in nanostructures, and can be extended towards the investigation of nonlinear phenomena. Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-85922 UR - http://www.opticsinfobase.org/oe/fulltext.cfm?uri=oe-20-13-14632&id=238393 ER - TY - JOUR A1 - Steinbacher, Andreas A1 - Buback, Johannes A1 - Nürnberger, Patrick A1 - Brixner, Tobias T1 - Precise and rapid detection of optical activity for accumulative femtosecond spectroscopy JF - Optics Express N2 - We present polarimetry, i.e. the detection of optical rotation of light polarization, in a configuration suitable for femtosecond spectroscopy. The polarimeter is based on common-path optical heterodyne interferometry and provides fast and highly sensitive detection of rotatory power. Femtosecond pump and polarimeter probe beams are integrated into a recently developed accumulative technique that further enhances sensitivity with respect to single-pulse methods. The high speed of the polarimeter affords optical rotation detection during the pump-pulse illumination period of a few seconds. We illustrate the concept on the photodissociation of the enantiomers of methyl p-tolyl sulfoxide. The sensitivity of rotatory detection, i.e. the minimum rotation angle that can be measured, is determined experimentally including all noise sources to be 0.10 milli-degrees for a measurement time of only one second and an interaction length of 250 μm. The suitability of the presented setup for femtosecond studies is demonstrated in a non-resonant two-photon photodissociation experiment. Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-85913 UR - http://www.opticsinfobase.org/oe/fulltext.cfm?uri=oe-20-11-11838&id=233249 ER - TY - JOUR A1 - Hoche, Joscha A1 - Flock, Marco A1 - Miao, Xincheng A1 - Philipp, Luca Nils A1 - Wenzel, Michael A1 - Fischer, Ingo A1 - Mitric, Roland T1 - Excimer formation dynamics in the isolated tetracene dimer JF - Chemical Science N2 - The understanding of excimer formation and its interplay with the singlet-correlated triplet pair state \(^{1}\)(TT) is of high significance for the development of efficient organic electronics. Here, we study the photoinduced dynamics of the tetracene dimer in the gas phase by time-resolved photoionisation and photoion imaging experiments as well as nonadiabatic dynamics simulations in order to obtain mechanistic insight into the excimer formation dynamics. The experiments are performed using a picosecond laser system for excitation into the S\(_{2}\) state and reveal a biexponential time dependence. The time constants, obtained as a function of excess energy, lie in the range between ≈10 ps and 100 ps and are assigned to the relaxation of the excimer on the S\(_{1}\) surface and to its deactivation to the ground state. Simulations of the quantum-classical photodynamics are carried out in the frame of the semi-empirical CISD and TD-lc-DFTB methods. Both theoretical approaches reveal a dominating relaxation pathway that is characterised by the formation of a perfectly stacked excimer. TD-lc-DFTB simulations have also uncovered a second relaxation channel into a less stable dimer conformation in the S\(_{1}\) state. Both methods have consistently shown that the electronic and geometric relaxation to the excimer state is completed in less than 10 ps. The inclusion of doubly excited states in the CISD dynamics and their diabatisation further allowed to observe a transient population of the \(^{1}\)(TT) state, which, however, gets depopulated on a timescale of 8 ps, leading finally to the trapping in the excimer minimum. KW - excimer formation KW - tetracene dimer KW - organic electronics Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-251559 VL - 12 IS - 36 SP - 11965 EP - 11975 ER - TY - JOUR A1 - Mukhopadhyay, Deb Pratim A1 - Schleier, Domenik A1 - Wirsing, Sara A1 - Ramler, Jaqueline A1 - Kaiser, Dustin A1 - Reusch, Engelbert A1 - Hemberger, Patrick A1 - Preitschopf, Tobias A1 - Krummenacher, Ivo A1 - Engels, Bernd A1 - Fischer, Ingo A1 - Lichtenberg, Crispin T1 - Methylbismuth: an organometallic bismuthinidene biradical JF - Chemical Science N2 - We report the generation, spectroscopic characterization, and computational analysis of the first free (non-stabilized) organometallic bismuthinidene, BiMe. The title compound was generated in situ from BiMe\(_3\) by controlled homolytic Bi–C bond cleavage in the gas phase. Its electronic structure was characterized by a combination of photoion mass-selected threshold photoelectron spectroscopy and DFT as well as multi-reference computations. A triplet ground state was identified and an ionization energy (IE) of 7.88 eV was experimentally determined. Methyl abstraction from BiMe\(_3\) to give [BiMe(_2\)]• is a key step in the generation of BiMe. We reaveal a bond dissociation energy of 210 ± 7 kJ mol\(^{−1}\), which is substantially higher than the previously accepted value. Nevertheless, the homolytic cleavage of Me–BiMe\(_2\) bonds could be achieved at moderate temperatures (60–120 °C) in the condensed phase, suggesting that [BiMe\(_2\)]• and BiMe are accessible as reactive intermediates under these conditions. KW - methylbismuth KW - Photoelektronenspektroskopie Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-251657 UR - https://pubs.rsc.org/en/content/articlelanding/2020/SC/D0SC02410D VL - 11 IS - 29 ER - TY - THES A1 - Siebert, Torsten Uwe T1 - Four-Wave Mixing Techniques Applied to the Investigation of Non-Adiabatic Dynamics in Polyatomic Molecules T1 - Vierwellenmisch-Spektroskopie zur Untersuchung nicht-adiabatischer Dynamik in polyatomaren Molekülen N2 - In the experiments presented in this work, third-order, time-resolved spectroscopy was applied to the disentanglement of nuclear and electronic degrees of freedom in polyatomic molecules. The motivation for approaching this problem was given by the decisive role that the coupling of nuclear and electronic dynamics plays in the mechanism of photochemical reactions and photobiological processes. In order to approach this complex problem, different strategies within the framework of time-resolved, four-wave mixing spectroscopy were developed that allowed for the dynamic as well as the energetic aspects of vibronic coupling in non-radiative transitions of polyatomic molecules to be addressed. This was achieved by utilizing the influence of optical as well as Raman resonances on four-wave mixing processes. These resonance effects on third-order, optical processes allow for a high selectivity to be attained with respect to the interrogation of specific aspects of molecular dynamics. The development of different strategies within the framework of time-resolved, four-wave mixing spectroscopy for addressing the problem of vibronic coupling began with the experiments on gaseous iodine. This simple, well investigated molecular system was chosen in order to unambiguously characterize the effect of Raman resonances on four-wave mixing processes. A time-resolved degenerative four-wave mixing (DFWM) experiment was carried out on gaseous iodine that allowed for the dynamics of coherent Stokes Raman scattering (CSRS) as well as a coherent anti-Stokes Raman scattering (CARS) to be observed parallel to the dynamics of a DFWM process at different spectral positions of the FWM signal. Here, the state-selectivity of these different FWM processes manifests itself in the vibrational wave packet dynamics on different electronic potentials of iodine. It could be shown that Raman resonances determine the selectivity with which these FWM processes prepare and interrogate nuclear dynamics in different electronic states. With the insight gained into the relevance of Raman resonant processes in FWM spectroscopy, an experimental scheme was devised that utilizes this effect to selectively interrogate the dynamics of a specific vibrational mode within a polyatomic molecule during a radiationless electronic transition. Here, a CARS process was employed to selectively probe specific vibrational modes of a molecular system by variably tuning the energy difference between the lasers involved in the CARS process to be in Raman resonance with the vibrational energy spacing of a particular vibrational mode. Using this aspect of a tunable resonance enhancement within a CARS scheme, this optical process was incorporated in a time-resolved pump-probe experiment as a mode-selective probe mechanism. This type of experimental configuration, that employs four pulsed laser fields, was classified as a pump-CARS scheme. Here, a laser pulse independent of the CARS process initiates the molecular dynamics that are interrogated selectively with respect to the vibrational mode of the system through the simultaneous interaction of the three pulsed fields involved in the CARS process. Time-resolution on a femtosecond timescale is achieved by introducing a time delay between the independent pump laser and the laser pulses of the CARS process. The experimental configuration of a pump-CARS scheme was applied to the study of the nuclear dynamics involved in the radiationless electronic transition between the first excited singlet state (S1) and the electronic ground state (S0) of all-trans-b-carotene. The mode-selective CARS probe allowed for the characteristic timescale with which specific vibrational modes are repopulated in the S0 state to be determined. From the varying repopulation times of specific vibrational modes, a mechanism with which the full set of vibrational states of the S0 potential are repopulated subsequent to the internal conversion process could be postulated. Most importantly, the form of nuclear motion that primarily funnels the population between the two electronic states could be identified as the C=C symmetric symmetric stretch mode in the polyene backbone of b-carotene. With this, the reaction coordinate of this radiationless electronic transition could be identified. The experiment shows, that the CARS probe is capable of determining the nuclear motion coupled to a radiationless electronic transition in complex polyatomic systems. The S1/S0 internal conversion process in b-carotene was further investigated with time-resolved transient gratings. Here, the energetic aspects of a non-adiabatic transition was addressed by determining the influence of the vibrational energy on the rate of this internal conversion. In order to compare the rate of internal conversion taking place out of vibrational ground state modes versus this transition initiating out of vibrationally hot modes, the strategy of shifting the probe mechanism in the transient grating scheme to spectral positions within and out of the red flank of the S1 absorption profile was pursued. The interrogation of different vibrational states was verified by determining the degree of vibrational cooling, taking place parallel to the internal conversion process. With this strategy, it could be shown that vibrationally hot states contribute to the internal conversion with a higher rate than vibrational ground state modes. In summary, different third-order, optical processes in the framework of time-resolved FWM were applied to the study of non-adiabatic dynamics in polyatomic molecules. By utilizing the effect of optical as well as Raman resonances on different FWM processes, it could be shown that third-order, time-resolved spectroscopy is a powerful tool for gaining insight into complex molecular dynamics such as vibronic coupling. The experiments presented in this work showed that the CARS process, as a mode-selective probe in time-resolved experiments, is capable of disentangling nuclear and electronic dynamics. N2 - In der vorliegenden Arbeit wurden verschiedene zeitaufgelöste, optische Prozesse dritter Ordnung zur Untersuchung nicht-adiabatischer Dynamiken in polyatomaren Molekülen vorgestellt. Derartige Dynamiken haben ihre Ursache in Kopplungen zwischen der Kern- und Elektronenbewegung im jeweiligen molekularen System und spielen eine entscheidende Rolle in vielen photochemischen und photobiologischen Prozessen. Es wurden unterschiedliche Strategien im Rahmen der zeitaufgelösten Vierwellenmisch-Spektroskopie entwickelt, die die Untersuchung sowohl dynamischer als auch energetischer Aspekte der vibronischen Kopplung bei strahlungslosen elektronischen Übergängen in polyatomaren Systemen ermöglichen. Dabei wurden sowohl elektronische als auch Raman-Resonanzen ausgenutzt, um eine hohe Selektivität in der Abfrage der molekularen Dynamik zu erzielen. Um den Einfluss von Raman-Resonanzen auf Vierwellenmisch-Prozesse (FWM = four-wave mixing) eindeutig zu bestimmen, wurde zuerst das einfache und gut charakterisierte molekulare System Jod untersucht. Femtosekunden-zeitaufgelöste entartete Vierwellenmischung (DFWM = degenerate four-wave mixing) an gasförmigem Jod ermöglichte eine simultane Beobachtung der Dynamik kohärenter Stokesscher Raman-Streuung (CSRS = coherent Stokes Raman scattering) und kohärenter anti-Stokesscher Raman-Streuung (CARS = coherent anti-Stokes Raman scattering) zusammen mit der Dynamik des eigentlichen DFWM-Prozesses durch Detektion an unterschiedlichen spektralen Positionen des FWM-Signals. Die Zustandsselektivität dieser drei FWM-Prozesse, die sich in der Generierung und Abfrage von Schwingungswellenpaketen auf verschiedenen elektronischen Potentialen von Jod manifestiert, konnte innerhalb eines einzigen Messvorgangs charakterisiert werden. Es zeigte sich, dass die Selektivität der unterschiedlichen FWM-Prozesse maßgeblich durch den Einfluss von Raman-Resonanzen bestimmt wird. Basierend auf den so gewonnenen Erkenntnissen über den Einfluss von Raman-Resonanzen bei FWM-Prozessen, wurde ein experimentelles Schema entwickelt, das es ermöglicht, selektiv bestimmte Schwingungsmoden eines polyatomaren Moleküls während eines strahlungslosen elektronischen Übergangs abzufragen. Hierzu wurde ein CARS-Prozess, der auf eine Raman-Resonanz in einem molekularen System abgestimmt wurde, als Abfrageschritt in einem pump-probe-Schema eingesetzt. Dieses experimentelle Schema, bei dem vier gepulste Laser zum Einsatz kommen, wird in Analogie zu einem herkömmlichen pump-probe-Experiment als pump-CARS-Messung bezeichnet. Hierbei regt ein vom CARS-Prozess unabhängiger pump-Laser einen elektronischen Zustand an, dessen Besetzung durch die simultane Wechselwirkung mit den drei Laserpulsen des CARS-Prozesses modenselektiv abgefragt wird. Durch Einführung einer variablen Verzögerungszeit zwischen dem initiierenden pump-Laser und dem CARS-Prozess lässt sich die Relaxationsdynamik auf einer Femtosekunden-Zeitskala auflösen. Diese experimentelle Konfiguration wurde zur Untersuchung der Kerndynamik des strahlungslosen elektronischen Übergangs zwischen dem ersten elektronisch angeregten Zustand (S1) und dem elektronischen Grundzustand (S0) des b-Carotin eingesetzt. Die zustandsselektive Beobachtung der internen Konversion liefert die Zeitkonstanten, mit denen ausgewählte Schwingungsmoden im S0-Zustand von b-Carotin wiederbevölkert werden. Aufgrund der Tatsache, dass unterschiedlichen Moden unterschiedliche Zeitkonstanten zugeordnet werden konnten, wurde ein Modell aufgestellt, welches die Konversion in den elektronischen Grundzustand in Abhängigkeit von den Schwingungszuständen beschreibt. So konnte festgestellt werden, dass der Populationstransfer beim strahlungslosen Übergang von der S1- auf die S0-Potentialfläche vornehmlich über die symmetrische C=C-Streckschwingung verläuft.Mit diesem Experiment konnte gezeigt werden, dass ein CARS-Prozess als Abfrageschritt in einem zeitaufgelösten pump-probe Experiment, in der Lage ist, die Kerndynamik zu bestimmen, die mit einem strahlungslosen elektronischen Übergang in einem komplexen polyatomaren Molekül verbunden ist. Der energetische Aspekt des nicht-adiabatischen Übergangs zwischen dem S1- und S0-Zustand in b-Carotin wurde mittels zeitaufgelöster transienter Gitter untersucht (TG = transient grating). Hierbei wurde der Einfluss der Schwingungsenergie auf die Geschwindigkeit der internen Konversion bestimmt. Um die Reaktionsgeschwindigkeit der internen Konversion aus schwingungsangeregten Zuständen und Moden im Schwingungsgrundzustand des S1-Potentials zu vergleichen, wurde das Signal spektral aufgelöst detektiert. Hierbei beinhaltete die rote Flanke des Absorptionsprofils des S1-Zustandes die Dynamik der angeregten Schwingungsmoden. Die Abfrage der Dynamik an einer spektralen Position, die sich im Zentrum des Absorptionsprofils befindet, ermöglichte hingegen die Beobachtung der internen Konversion aus dem Grundzustand der Schwingungszustände. Mit der gewählten experimentellen Methode konnte gezeigt werden, dass schwingungsangeregte Zustände mit einer höheren Reaktionsgeschwindigkeit an der internen Konversion teilnehmen als Moden im Schwingungsgrundzustand. Zusammenfassend wurden in dieser Arbeit unterschiedliche optische Prozesse dritter Ordnung zur Untersuchung nicht-adiabatischer Dynamiken in polyatomaren Molekülen angewandt. Durch Ausnutzung von sowohl elektronischen als auch Raman-Resonanzen auf unterschiedliche FWM-Prozesse konnte gezeigt werden, dass optische Prozesse dritter Ordnung ein geeignetes Werkzeug zur Untersuchung komplexer Moleküldynamiken darstellen. Die Experimente in dieser Arbeit verdeutlichten, dass der CARS-Prozess als modenselektiver Abfrageschritt die spezifische Beobachtung von Kerndynamik während eines elektronischen Übergangs erlaubt. KW - Provitamin A KW - Vierwellenmischung KW - Polyatomare Verbindungen KW - Spektroskopie KW - Spektroskopie KW - Vierwellenmischung KW - CARS KW - Transiente Gitter KW - Femtosekunden KW - Nicht-adiabatische Dynamik KW - beta-Carotin KW - Iod KW - Spectroscopy KW - Four-Wave Mixing KW - CARS KW - Transient Grating KW - Femtosecond KW - Non-adiabatic Dynamics KW - beta-Carotene KW - Iodine Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-2456 ER - TY - THES A1 - Schlücker, Sebastian T1 - Lineare und nichtlineare Raman-Spektroskopie an biologisch relevanten Modellystemen T1 - Linear and nonlinear Raman spectroscopy on biological relevant model systems N2 - Im Rahmen dieser Dissertation wurden insgesamt drei verschiedene Fragestellungen an biologisch relevanten Modellsystemen mit Hilfe von diversen linearen und nichtlinearen Raman-spektroskopischen Techniken bearbeitet. Neben der Untersuchung von Wasserstoffbrücken-gebundenen Komplexen und ihrer Dynamik auf der fs-Zeitskala (Kapitel 4) bildeten Untersuchungen zur Struktur von Porphyrinen (Kapitel 5) und beta-Carotin (Kapitel 6) als Vertreter wichtiger Klassen von Biomolekülen den Schwerpunkt dieser Arbeit. Die spektroskopischen Ergebnisse wurden durchweg über Strukturen und Schwingungsspektren, welche mit Hilfe der Dichtefunktionaltheorie (DFT) berechnet wurden, unterstützt. Die dritte bearbeitete Thematik zum Nachweis anthropogener und ökologisch relevanter Aerosole war bioanalytisch motiviert und wurde anhand von Pestizid-Modellsubstanzen bearbeitet (Kapitel 7). N2 - Three different problems on biological relevant model systems were investigated within the framework of this thesis by means of various linear and nonlinear Raman techniques. Besides the studies on hydrogen-bonded complexes and their dynamics on a fs-timescale (chapter 4), structural investigations on porphyrins (chapter 5) and beta-carotene (chapter 6) as representatives of important classes of biomolecules were the central subject of this dissertation. The experimental data were confirmed throughout by structures and vibrational spectra obtained from calculations based on density functional theory (DFT). The last topic, the detection of anthropogenic aerosols with ecological relevance, was motivated from bioanalytical chemistry. The corresponding investigations were carried out on pesticide model compounds (chapter 7). KW - Biomolekül KW - CARS-Spektroskopie KW - Infrarot- und Raman-Spektroskopie KW - Resonanz-Raman-Spektroskopie KW - kohärente anti-Stokessche Raman-Spektroskopie (CARS) KW - Infrared and Raman spectroscopy KW - resonance Raman scattering KW - coherent anti-Stokes Raman scattering (CARS) Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-1181438 ER - TY - THES A1 - Fecher, Frank Erich T1 - Nichtlineare Dynamik von chemischen Sauerstoff-Oszillatoren T1 - Nonlinear Dynamics of chemical Oxygen Oscillators N2 - Die vorliegende Arbeit hat zum Ziel, das Antwortverhalten nichtlinearer Reaktionen auf zielgerichtete Störungen zu untersuchen. Dabei beschäftigt sie sich mit zwei nichtlinearen chemischen Sauerstoff-Oszillatoren. Bei den beiden nichtlinearen chemischen Reaktionen handelt es sich um den Polyacrylamid-Methylenblau-Sauerstoff- (PA-MBO) Oszillator und um die Kupfer(II)ionen katalysierte Oxidation von Ascorbinsäure durch Luftsauerstoff. Im ersten Fall wird durch selektive Belichtung des Reaktionsmediums die gebildete Geloberfläche durch ein computergenerirtes Muster kodiert. Die Systemantwort wird mit Hilfe einer CCD-Kamera aufgenommen und danach einer Analyse unterzogen. Die erhaltenen Ergebnisse werden anschließend durch eine Computersimulation verifiziert. Die zweite untersuchte Möglichkeit, das PA-MBO-System einer Störung zu unterwerfen, ist das Anlegen eines externen elektrischen Feldes. In einer speziell dafür entworfenen Anordnung bildet sich ein quasi-eindimensionales Turing-Muster. In dieser quasi-eindimensionalen Anordnung kann die Reaktion leicht elektrischen Strömen von bis zu 200 mA/cm2 ausgesetzt werden. Die experimentellen Daten werden anschließend der Karhunen-Loeve Zerlegung unterworfen, um die komplexe Dynamik der Systemantwort zu studieren. Die Oxidation von Ascorbinsäure durch Luftsauerstoff in Gegenwart von Kupfer(II)ionen, wird im CSTR durchgeführt. Dabei läßt sich das Phänomen der stochastischen Resonanz beobachten, wenn man die Flußrate sinusförmig moduliert und dieser Frequenz zusätzlich weißes Rauschen überlagert. N2 - In this work two nonlinear chemical oxygen-oscillators are presented. The two chemical reactions are: the methylene blue-sulfide-oxygen chemical oscillator (MBO) and the oxidation of ascorbic acid by air oxygen catalyzed by copper(II) ions. The effect of various perturbations on these systems is investigated. In the PA-MBO system the gel components acrylamide, N,N'-methylene-bisacrylamide, triethanolamine and the initiator peroxodisulfate are mixed with the components of the methyleneblue-sulfide-oxygen oscillating reaction. The latter are sodiumsulfide, methyleneblue and molecular oxygen from the air. In the MBO reaction sulfide is oxidized by molecular oxygen where methyleneblue acts as redox-catalyst. During the gelation process of acrylamide, chemical reactions between the gel components and the reactants of the MBO are considered to be crucial for the formation of the observed hexagonal and striped patterns. The nonlinearity results from a competitive autocatalysis of polymer species with high molecular weight and low diffusivity. KW - Sauerstoff KW - Oszillator KW - Nichtlineare Dynamik KW - Stochastischer Prozess KW - Nichtlineare Dynamik KW - Sauerstoff-Oszillatoren KW - PA-MBO-System KW - Stochastische Resonanz KW - Nonlinear Dynamics KW - Oxygen-Oscillator KW - PA-MBO-System KW - stochastic resonance Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-185 ER - TY - THES A1 - Petry, Renate T1 - Spektroskopische Strukturanalytik synthetischer Polypeptide T1 - Structural Analysis of Synthetic Polypeptides by Optical Spectroscopy Methods N2 - In der vorliegenden Arbeit wurden zwei spektroskopische Methoden (Raman- und Circulardichroismus-Spektroskopie) und die Kernspinresonanz zur Untersuchung der Sekundärstruktur von synthetischen Polypeptiden eingesetzt. Dabei wurden die Struktur-Funktions-Beziehungen der dritten extrazellulären Schleife des Gonadotropin-freisetzenden Rezeptors (GnRH-R) untersucht. Die spektroskopischen Ergebnisse belegten, dass die zuvor getroffene Aussage über eine vorhandene helikale Struktur revidiert werden musste. Die Strukturanalysen mit Hilfe der CD-, Raman- und 2D NMR-Experimente an zwei Serien von Polypeptiden lieferten Aussagen über die Sekundärstruktur. Insbesondere die Raman-Untersuchungen in Verbindung mit einer statistischen Datenanalyse lieferten detaillierte Information über subtile Konformationsänderungen, die einerseits durch die Addition und andererseits durch die Substitution einzelner Aminosäuren in den synthetischen Polypeptiden ausgelöst wurden. Anhand der ausgewählten Raman-Linien konnte nachgewiesen werden, dass sowohl die Änderungen der Polypeptidkettenlänge als auch die Änderung der Polypeptidsequenzen mit den beobachteten Intensitäten der Raman-Linien korreliert sind. KW - Synthetische Polypeptide KW - Strukturaufklärung KW - Raman-Spektroskopie KW - Synthetische Polypeptide KW - Sekundärstruktur KW - Proteindesign KW - Raman-Spektroskopie KW - Prolin KW - G-Protein-gekoppelter Rezeptor KW - synthetic polypeptides KW - secondary structure KW - protein design KW - Raman spectroscopy KW - proline KW - G protein-coupled receptor Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-664 ER - TY - THES A1 - Szeghalmi, Adriana Viorica T1 - The ground and excited state molecular structure of model systems undergoing photochemical processes and the characterization of active agents by means of vibrational spectroscopy and theoretical calculations T1 - Die Molekularstruktur des Grund- und angeregten Zustandes von Modelsystemen bei Photochemischen Prozessen und die Charakterisierung von Wirkstoffen mittels Schwingungsspektroskopie und Theoretische Rechnungen N2 - The present thesis reports about vibrational and quantum chemical investigations on model systems undergoing photochemical processes and pharmaceutically active compounds, respectively. Infrared (IR) and Raman spectroscopy were applied for the characterization of the ground state molecular structure. Moreover, resonance Raman (RR) spectra contain additional information about the resonantly enhanced excited state molecular structure. A quantitative resonance Raman intensity analysis in conjunction with the simultaneous simulation of the absorption spectra by means of time-dependent propagation methods was accomplished in order to extract valuable information about the excited state molecular structures of the investigated systems. Surface enhanced Raman scattering (SERS) allows one to determine the interaction and adsorption site of active agents on a metal substrate. Furthermore, density functional theory (DFT) and potential energy distribution (PED) calculations were carried out for an exact assignment of the vibrational spectra. Complete active space self consistent field (CASSCF) and configuration interaction (CI) calculations for some model systems were also performed to assess the experimental results on the excited state potential surfaces. The fundamentals of resonance Raman spectroscopy are treated in detail, describing the physical processes and emphasizing the theoretical methodologies which allow one to obtain the information about the resonantly excited state via an RR intensity analysis. The Brownian oscillator model to determine the solvent reorganization energy is briefly presented. Furthermore, the SERS enhancement mechanisms and selection rules to determine the orientation of the molecules adsorbed on the metal substrate are discussed. The Hartree-Fock approach to calculate the ground state geometry is expatiated, and the basic characteristics of the CI and CASSCF calculations are specified. The chapter ends with a short description of the DFT calculations. Chapter 4 deals with the investigation of the excited state intramolecular proton transfer of the model system, 1-hydroxy-2-acetonaphthone (HAN). The vibrations showing the highest displacement parameters correspond to stretching and in-plane deformation modes of the naphthalene ring and the conjugated carbonyl group, while the OH stretching mode exhibits no observable enhancement. The cooperative effect of the skeletal vibrations reduces the distance between the carbonyl and hydroxyl oxygen atoms in accordance with a general electron density redistribution. Hence, the leading force in the proton transfer process is the increase in electron density on the carbonyl group and the decrease of the negative charge on the hydroxyl oxygen. In chapter 5 the structural and vibrational characteristics of the organic mixed valence system N,N,N’,N’-tetraphenylphenylenediamine radical cation (1+) are discussed. The resonance Raman measurements showed that at least eight vibrational modes are strongly coupled to the optical charge transfer process in (1+). These Franck-Condon active modes were assigned to symmetric vibrations. The most enhanced band corresponds to the symmetric stretching mode along the N-phenylene-N unit and exhibits the largest vibrational reorganization energy. Nevertheless, symmetric stretching modes of the phenylene and phenyl units as well as deformation modes are also coupled to the electronic process. The total vibrational reorganization energy of these symmetrical modes is dominant, while the solvent induced broadening and reorganization energy are found to be small. Hence, (1+) adopts a symmetrical delocalized Robin-Day Class III structure in the ground state. Chapter 6 reports about a vibrational spectroscopic investigation of a model organic photorefractive thiophene derivative, 2-(N,N-diethylamino)-5-(2’,2’-dicyanovinyl)-thiophene. The geometry of the first excited state were optimized and the FC parameters were calculated using the configuration interaction with single excitations method. These calculations show that the contribution of the zwitterionic structure to the excited state is significantly higher than in the ground state. The resonance Raman spectra indicate that several stretching modes along the bonds connecting the donor and acceptor moieties as well as the S-C stretching vibrations are enhanced. Chapter 7 presents the vibrational analysis of an aziridinyl tripeptide, a cysteine protease inhibitor active drug. The vibrational analysis reveals stronger H-bonding of the aziridine NH unit in the solid state of the aziridinyl tripeptide than in the liquid electrophilic building block, indicating medium strong intermolecular H-bond interactions in the crystal unit. The amide hydrogen atoms of the aziridinyl tripeptide are involved in weaker H-bonds than in an epoxide analogon. Furthermore, the characteristic vibrational modes of the peptide backbone were discussed. Chapter 8 reports on the adsorption mechanism of two related anti-leukemia active agents, 6-mercaptopurine (6MP) and 6-mercaptopurine-ribose (6MPR) on a silver colloid. Both molecules adsorb through the N1 and possibly S atom on the metal surface under basic conditions. The SERS spectra recorded for acidic pH values showed that the ribose derivative exhibits a different adsorption behavior compared to the free base. 6MP probably adsorbs on the silver sol through the N9 and N3 atoms, while 6MPR interacts with the surface via the N7 and probably S atoms. Around critical biological concentrations and pH values i.e. at low concentrations and almost neutral condition (pH 7-9), 6MPR interacts with the substrate through both N7 and N1 atoms, possibly forming two differently adsorbed species, while for 6MP only the species adsorbed via N1 was evidenced. N2 - In der vorliegenden Arbeit wurden schwingungsspektroskopische und quanten-chemische Untersuchungen an unterschiedlichen Modellsystemen, die an photochemischen Prozessen beteiligt sind, und an verschiedenen Pharmazeutika durchgeführt. Die Methoden der Infrarot- (IR) und Raman-Spektroskopie wurden für die Charakterisierung der Grund-zustandsgeometrie verwendet. Darüber hinaus konnten aus Resonanz-Raman- (RR) Spektren zusätzliche Informationen über den elektronisch angeregten Zustand erhalten werden. Diese aufschlussreichen Aussagen über die elektronisch angeregten Zustände der untersuchten Systeme wurden durch die simultane quantitative Analyse der Resonanz-Raman-Spektren und des Absorptionsspektrums gewonnen. Die Anregungsprofile für die Resonanz-Raman-Streuung und die Absorptionsquerschnitte wurden mittels zeitabhängiger Propagationsmethoden berechnet. Oberflächen-verstärkte Raman-Streu- (SERS) Experimente ermöglichten die Charakterisierung der Wechselwirkungen und Adsorptionsbindungsstellen von Wirkstoffen an Metalloberflächen. Des Weiteren wurden Dichtefunktionaltheorie- (DFT) und PED-Rechnungen durchgeführt, um eine genaue Zuordnung der Schwingungsspektren zu gestatten. CASSCF- und CI-Rechnungen wurden in einzelnen Fällen durchgeführt, um sie mit den experimentellen Ergebnissen für die Potenzialhyperfläche des angeregten Zustands vergleichen zu können. Die Grundlagen der Resonanz-Raman-Spekroskopie wurden ausführlich diskutiert. Dabei wurden die physikalischen Prozesse beschrieben und die mathematischen Techniken, die die Bestimmung der Parameter des angeregten Zustands durch die RR-Intensitätsanalyse ermöglichen, hervorgehoben. Das Modell des Brownian-Oszillators für die Ermittlung der Lösungsmittel-Reorganisations-energie wurde kurz beschrieben. Weiterhin wurden die SERS Verstärkungsmechanismen und Auswahlregeln diskutiert. Der Hartree-Fock-Ansatz zur Berechnung des Grundzustandes sowie die CI- und CASSCF-Methoden wurde erläutert. Das Kapitel endete mit einer kurzen Beschreibung der Grundlagen von DFT-Rechnungen. Im vierten Kapitel wurden die Untersuchungen an einem Modell-Systems (1-hydroxy-2-acetonaphthone HAN), das einen Protonentransferprozess im angeregten Zustand zeigt, dargestellt. Die Streck- und Deformationsmoden des Naphthalinrings und der konjugierten Carbonylgruppe weisen die größten Displacement-Parameter auf, während die O-H-Streckschwingung keine Resonanz-Verstärkung erfährt. Diese Gerüst-schwingungsmoden verringern den Abstand zwischen den Carbonyl- und Hydroxyl-Sauerstoffatomen, was mit einer generellen Umverteilung der Elektronendichte einhergeht. Daher wird der Protonentransferprozess durch die Zunahme der Elektronendichte auf dem Carbonylsauerstoffatom und der gleichzeitigen Abnahme der negativen Ladung auf dem Hydroxylsauerstoffatom gesteuert. Im fünften Kapitel wurden die strukturellen und vibronischen Eigenschaften eines organischen gemischtvalenten Systems, des N,N,N’,N’-tetraphenylphenylenediamine Radikalkations (1+), untersucht. Die Resonanz-Raman-Experimente zeigten, dass mindestens acht Schwingungsmoden stark an den optischen Ladungstransferprozess gekoppelt sind. Diese Franck-Condon aktiven Moden wurden vornehmlich symmetrischen Moden zugeordnet. Die am meisten verstärkte Mode entspricht der symmetrischen Streckschwingung entlang der N-Ar-N-Achse. Jedoch sind auch symmetrische Streckschwingungsmoden der Phenyl- und Phyenylen-Gruppen und Deformationsmoden an dem elektronischen Prozess beteiligt. Der Beitrag dieser symmetrischen Moden zur Reorganisationsenergie dominiert, während die Lösungsmittelreorganisationsenergie nur sehr gering ist. Die erhaltenen Ergebnisse beweisen, dass es sich hier um ein symmetrisches delokalisiertes Robin-Day-Class-III-System handelt. Das sechste Kapitel beschäftigt sich mit einer schwingungsspektroskopischen Analyse eines photorefraktiven Thiophen-Derivat-Modellsystems, 2-(N,N-diethylamino)-5(2’,2’-dicyanovinyl)-thiophen. Die Geometrien des Grund- und ersten angeregten Zustands wurden optimiert und die FC Parameter unter Anwendung der CIS Methode berechnet. Diese Rechnungen ergaben, dass der Anteil der zwitterionischen Struktur im angeregten Zustand dominiert. Die Resonanz-Raman-Spektren zeigten, dass mehrere Streckschwingungsmoden entlang der Bindungen, die die Donor- und Akzeptor-Einheiten verknüpfen, und die S-C Streckschwingungsmoden verstärkt wurden. Das siebte Kapitel behandelt die Analyse eines Aziridinyl-Tripeptids, ein Wirkstoff gegen Cystein-Proteasen. Die Schwingungsanalyse ergab eine stärkere Wasserstoffbrückenbindung der Aziridin NH-Gruppe des Aziridinyl-Tripeptids im festen Zustand als in der flüssigen Baueinheit. Die Wasserstoffatome der Amidgruppen des Tripeptids sind an schwächeren Wasserstoffbrückenbindungen als die des Epoxid-Analogons beteiligt. Darüber hinaus wurden die charakteristischen Gerüstschwingungsmoden des Tripeptids diskutiert. Im vorletzten Kapitel wurde der Adsorptionsmechanismus von zwei Anti-Leukämie-Wirkstoffen, 6-Mercaptopurin (6MP) und 6-Mercaptopurin-ribose (6MPR) diskutiert. Unter basischen Bedingungen adsorbieren beide Moleküle über die N1- und S-Atome an der Metalloberfläche. Für biologisch kritischen Konzentrationen und pH-Werten, d.h. für nahezu neutrale Bedingungen (pH-Wert 7-9) und eine geringe Konzentration, wurde festgestellt, dass das 6MPR-Molekül mit dem Substrat sowohl über das N7- als auch N1-Atom wechselwirkt, wobei wahrscheinlich zwei unterschiedlich adsorbierte Spezies vorhanden sind. Im Gegensatz dazu weist das 6MP-Molekül nur eine über das N1-Atom adsorbierte Spezies auf. KW - Photochemie KW - Molekülstruktur KW - Grundzustand KW - Raman-Spektroskopie KW - Angeregter Zustand KW - Resonanz-Raman-Effekt KW - Oberflächenverstärkter Raman-Effekt KW - Dichtefunktionalformalismus KW - Ab-initio-Rechnung KW - Resonanz-Raman KW - Oberflächen-verstärkte Raman Streuung (SERS) KW - DFT- und ab-initio-Rechnungen KW - photochemische Prozesse KW - Wirkstoffe KW - Resonance Raman KW - Surface enhance Raman scattering (SERS) KW - DFT and ab-initio calculations KW - photochemical processes KW - active agents Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-11961 ER - TY - THES A1 - Moigno, Damien T1 - Study of the ligand effects on the metal-ligand bond in some new organometallic complexes using FT-Raman and -IR spectroscopy, isotopic substitution and density functional theory techniques T1 - Untersuchung der Wirkung von Liganden auf die Metall-Ligand Bindungen einiger neuer organometallischer Komplexe mit Hilfe der FT-Raman und -IR Spektroskopie, isotopischen Substitution und DFT Techniken N2 - The present studies which have been performed in the work-group C-2 (Prof. W. Kiefer) within the program of the Sonderforschungsbereichs 347, deal with the FT-Raman and –IR spectroscopy on new organometallic complexes, synthesized in the work-groups B-2 (Prof. W. Malisch), B-3 (Prof. W. A. Schenk), D-1 (Prof. H. Werner) and D-4 (Prof. D. Stalke). The FT-Raman spectra recorded at 1064 nm led to very useful and interesting information. Furthermore, the DFT calculations which are known to offer promise of obtaining accurate vibrational wavenumbers, were successfully used for the assignment of the vibrational spectra. For the first time it has been possible to ascribe exactly the n(RhC) stretching mode in the vinylidene rhodium(I) complex trans-[RhF(=C=CH2)(PiPr3)2] by using isotopic substitution, in conjunction with theoretical calculations. This is also true for the complexes trans-[RhF(CO)(PiPr3)2], trans-[RhF(C2H4)(PiPr3)2], trans-[RhX(=C=CHPh)(PiPr3)2] (X = F, Cl, Br, I, Me, PhCºC) and trans-[RhX(CN-2,6-xylyl)(PiPr3)2] (X = F, Cl, Br, I, CºCPh). In addition, the comparison between the n(RhC) wavenumbers of the complexes trans-[RhF(=13C=13CH2)(PiPr3)2] and trans-[RhF(CO)(PiPr3)2], containing the isoelectronic ligands 13C=13CH2 and CO, which have the same reduced mass, indicated that the Rh-C bond is stronger in the carbonyl than in the vinylidene complex. Besides, the n(RhF) stretching mode, which has been observed at higher wavenumbers in the FT-Raman and -IR spectra of trans-[RhF(CO)(PiPr3)2], showed that the carbonyl ligand is a better p-acceptor and a less effective s-donor than the vinylidene one. Moreover, the comparison of the n(CºC) and n(Rh-C) modes from the FT-Raman spectrum of the complexes trans-[Rh(CºCPh)(L)(PiPr3)2] (L = C=CHPh, CO, CN-2,6-xylyl) point out that the p-acceptor ability of the ligand trans to CºCPh should rise in the order C=CH2 < CO < CN-2,6-xylyl £ C=CHPh. The investigated sensitivity of the n(RhC), n(CC), n(CO) and n(CN) vibrational modes to the electronic modifications occuring in the vinylidene, carbonyl, ethylene and isonitrile complexes, should allow in the future the examination of the p-acceptor or p-donor properties of further ligands. Likewise, we were able to characterize the influence of various X ligands on the RhC bond by using the n(RhC) stretching mode as a probe for the weakening of this. The calculated wavenumbers of the n(RhC) for the vinylidene complexes trans-[RhX(=C=CHR)(PiPr3)2], where R = H or Ph, suggested that the strength of the Rh=C bond increases along the sequence X = CºCPh < CH3 < I < Br < Cl < F. For the series of carbonyl compounds trans-[RhX(CO)(PiPr3)2], where X = F, Cl, Br and I, analogous results have been obtained and confirmed from the model compounds trans-[RhX(CO)(PMe3)2]. Since, the calculated vibrational modes for the ethylene complex trans-[RhF(C2H4)(PiPr3)2] were in good agreement with the experimental results and supported the description of this complex as a metallacyclopropane, we were interested in getting more information upon this class of compounds. In this context, we have recorded the FT-Raman and -IR spectra of the thioaldehyde complexes mer-[W(CO)3(dmpe)(h2-S=CH2)] and mer-[W(CO)3(dmpe)(h2-S=CD2)] which have been synthezised by B-3. The positions of the different WL vibrational modes anticipated by the DFT calculations, were consistent with the experimental results. Indeed, the analysis of the band shifts in the FT-Raman and –IR spectra of the isotopomer mer-[W(CO)3(dmpe)(h2-S=CD2)] confirmed our assignment. The different stereoisomers of complex mer-[W(CO)3(dmpe)(h2-S=CH2)] were investigated too, since RMN and IR-data have shown that complex mer-[W(CO)3(dmpe)(h2-S=CH2)] lead in solution to an equilibrium. Since the information on the vibrational spectra of the molybdenum and tungsten complexes Cp(CO)2M-PR2-X (M = Mo, W; R = Me, tBu, Ph; X = S, Se) is very scarce, we extended our research work to this class of compounds. We have tried to elucidate the bonding properties in these chalcogenoheterocycle complexes by taking advantage of the mass effect on the different metal atoms (W vs. Mo). Thus, the observed band shifts allowed to assign most of the ML fundamental modes of these complexes. This project and the following one were a cooperation within the work-group B-2. The Raman and IR spectra of the matrix isolated photoproducts expected by the UV irradiation of the iron silyl complex Cp(CO)2FeSiH2CH3 have been already reported by Claudia Fickert and Volker Nagel in their PhD-thesis. Since no exact assignment was feasible for these spectra, we were interested in the study of the reaction products created by irradiation of the carbonyl iron silyl complex Cp(CO)2FeCH2SiH3. Although the calculated characteristic vibrational modes of the metal ligand unit for the various photoproducts are significantly different in constitution, they are very similar in wavenumbers, which did not simplify their identification. However, the theoretical results have been found to be consistent with the earlier experimental results. Finally, the last part of this thesis has been devoted to the (2-Py)2E- anions which exhibit a high selectivity toward metal-coordination. All di(2-pyridyl) amides and -phosphides which were synthesized by D-4, coordinate the R2Al+ fragment via both ring nitrogen atoms. This already suggests that the charge density in the anions is coupled into the rings and accumulated at the ring nitrogen atoms, but the Lewis basicity of the central nitrogen atom in Et2Al(2-Py)2N is still high enough to coordinate a second equivalent AlEt3 to form the Lewis acid base adduct Et2Al(2-Py)2NAlEt3. Due to the higher electronegativity of the central nitrogen atom in Me2Al(2-Py)2N, Et2Al(2-Py)2N and Et2Al(2-Py)2NAlEt3, compared to the bridging two coordinated phosphorus atom in Me2Al(2-Py)2P and Et2Al(2-Py)2P, the di(2-pyridyl)amide is the hardest Lewis base. In the phosphides merely all charge density couples into the rings leaving the central phosphorus atom only attractive for soft metals. These results were confirmed by using DFT and MP2 calculations. Moreover, a similar behaviour has been observed and described for the benzothiazolyl complex [Me2Al{Py(Bth)P}], where complementary investigations are to be continued. The DFT calculations carried out on the model compounds analysed in these studies supply very accurate wavenumbers and molecular geometries, these being in excellent agreement with the experimental results obtained from the corresponding isolated complexes. N2 - Die vorliegende Arbeit wurde im Rahmen des Sonderforschungsbereichs 347 „Selektive Reaktionen Metall-aktivierter Moleküle“ im Teilprojekt C-2 (Prof. W. Kiefer) „Laserspektroskopie zur Charakterisierung der Struktur und Dynamik Metall-gebundener Moleküle“ durchgeführt. Diese befaßt sich mit den Infrarot- und Raman-spektroskopischen Untersuchungen an Übergangsmetallverbindungen, die in den Teilprojekten B-2 (Prof. W. Malisch), B-3 (Prof. W. A. Schenk), D-1 (Prof. H. Werner), D-4 (Prof. D. Stalke) synthetisiert wurden. Durch den Einsatz der FT-Raman-Spektroskopie mit langwelliger Laseranregung im NIR-Bereich und zum Teil von isotopenmarkierten Molekülen konnten aussagekräftige Spektren erhalten werden. Die Dichtefunktionnaltheorie stellte sich als geeignetes Mittel zur Vorhersage und Interpretation der Schwingungsspektren heraus. Abhängig von der Größe der betrachteten Komplexe waren jeweils Rechnungen nötig, die auf sehr unterschiedlichen theoretischen Niveaus basierten. Zum ersten Mal wurde mit Hilfe der Isotopenmarkierung und der Dichtefunktionaltheorie die Valenzschwingung n(Rh=C) in trans-[RhF(L)(PiPr3)2] (L = C=CH2, 13C=13CH2) charakterisiert. Diese zeigte sich als eine starke Raman-Bande und konnte ebenfalls im trans-[RhF(CO)(PiPr3)2] identifiziert werden. Darüber hinhaus erkannte man beim Vergleich von trans-[RhF(13C=13CH2)(PiPr3)2] und trans-[RhF(CO)(PiPr3)2] eine Verschiebung nach höheren Wellenzahlen der Valenzschwingung n(RhC) für den Carbonyl-Komplex. Einerseits haben beide Liganden 13C=13CH2 und CO die gleiche reduzierte Masse, was die elektronische Natur der n(RhC)-Verschiebung zeigt, welche eine Verstärkung der RhC-Valenzkraftkonstanten im Fall des Carbonyls belegt. Anderseits weist die Verschiebung der n(RhF)-Streckschwingung nach höheren Wellenzahlen im Carbonyl-Komplex für deren Ligand bessere p-Akzeptor- und schlechtere s-Donor-Eigenschaften gegenüber dem Vinyliden auf. Durch die aus solchen Untersuchungen gewonnenen n(RhC)- und n(CºC)-Verschiebungen in den verschiedenen untersuchten Komplexen ergibt sich die folgende Reihe abnehmender p-Akzeptorstärke: C=CHPh ³ CN-2,6-xylyl > CO > C=CH2. Die Empfindlichkeit der Valenzschwingungen n(RhC), n(CC), n(CO) und n(CN) gegenüber Veränderungen der elektronischen Verhältnisse in Vinylidene-, Carbonyl-, Ethylene- und Isonitrile-Komplexen läßt sich ihrerseits als „Sonde“ zur Untersuchung der p-Akzeptor-bzw. p-Donor-Eigenschaften anderer Liganden nutzen. Die Beeinflussung, vor allem die Schwächung der RhC-Bindung durch einen trans-ständigen Liganden konnte dadurch an den Komplexen trans-[RhX(13C=13CH2)(PiPr3)2] (X = F, Cl, Br, I), trans-[RhX(C=CHPh)(PiPr3)2] (X = F, Cl, Br, I, Me, PhCºC), trans-[RhX(CO)(PiPr3)2] (X = F, Cl, Br, I, PhCºC) und trans-[RhX(CN-2,6-xylyl)(PiPr3)2] (X = F, Cl, Br, I, PhCºC) untersucht werden. Die FT-Raman Spektroskopie zeigte sich als eine nützliche Methode zur Untersuchung des Trans-Einflusses. MO- und NBO-Berechnungen waren dabei sehr hilfreich, um diesen Effekt zu charakterisieren. Eine weitere Substanzklasse der hier untersuchten Übergangsmetallverbindungen stellen die verschiedenen Molybden- und Wolframkomplexe dar, die in den Teilprojekten B-3 und B-2 synthetisiert wurden. In diesem Zusammenhang wurden die FT-Raman- und –IR-Spektren von den polykristallinen Thioaldehyd-Komplexen mer-[W(CO)3(dmpe)(h2-S=CR2)] (R = H, D) aufgenommen und mit Dichtefunktionalrechnungen verglichen. Die Isotopenmarkierung lieferte eine klare Zuordnung der n(WC) und n(CS) Valenzstreckschwingungen, welche den partialen CS-Doppelbindungscharakter in diesen Verbindungen zeigte. Zudem konnte eine vollständige Analyse dieser Komplexe mit Hilfe der DFT-Rechnungen erlangt werden. NMR- und IR-Daten zeigten, daß bei einer Lösung von mer-[W(CO)3(dmpe)(h2-S=CH2)] ein Gleichgewicht stattfindet. Infolgedessen wurden die Energien der unterschiedlichen Stereo-Isomere von mer-[W(CO)3(dmpe)(h2-S=CH2)] untersucht, welche in sehr guter Übereinstimmung mit dem experimentellen Befund standen. Die Umsetzung der Phosphenium-Komplexe Cp(CO)2M=PR2 (M = W, Mo; R = tBu, Ph) mit Schwefel oder Selen lieferte entsprechende stabile [2+1]-Cycloaddukte in guten bis sehr guten Ausbeuten. FT-Ramanspektren von solchen Verbindungen wurden auf der Basis von Dichtefunktionalrechnungen aufgenommen und diskutiert. Diese Untersuchungen fanden in Zusammenarbeit mit Teilprojekt B-2 statt und hatten die Aufklärung der Bindungseigenschaften des Dreirings in diesen Komplexen zum Ziel. Die wichtigsten n(M-L) Valenzschwingungen konnten ebenso charakterisiert werden. Bei der UV-Bestrahlung von Cp(CO)2FeSiH2Me und Cp(CO)2FeCH2SiH3 sind verschiedene Photoprodukte bzw. Intermediate zu erwarten. In den Dissertationen von Claudia Fickert und Volker Nagel sind Veränderungen an den Raman- bzw. IR-Spektren der UV-Bestrahlungexperimente der matrixisolierten Substanzen vorgestellt und diskutiert worden. Dabei wurde die a-H-Umlagerung nach photochemischer Decarbonylierung als stabilstes Intermediat postuliert. Jedoch konnten keine eindeutigen Aussagen getroffen werden. Aufgrund dessen wurde die theoretische photochemisch induzierte Decarbonylierung und anschließenden Umlagerungen von Cp(CO)2FeSiH2Me und Cp(CO)2FeCH2SiH3 mit Hilfe der Dichtefunktionaltheorie behandelt und in einem Kapitel der vorliegenden Dissertation dargestellt. Im letzten Teil dieser Arbeit wurden Raman-Spektren und quantenchemische Rechnungen an Di(2-Pyridyl)systemen durchgeführt, die im Teilprojekt D-4 synthetisiert wurden. Die Py2E--Anionen weisen eine außergewöhnliche Selektivität bezüglich der Metallkoordination auf. Um geeignete Vorläufermoleküle zur Darstellung dünner III/V-Schichten mittels MOCVD-Experimente darzustellen, wurde Py2NH und Py2PH mit Et3Al bzw. Me3Al umgesetzt. Ein deutlicher Unterschied zwischen Amid und Phosphid ist in der Reaktivität gegenüber einem weiteren Lewis-säuren Äquivalent Et3Al bzw. Me3Al zu erkennen. Das bivalente amidische Stickstoffatom ist im Gegensatz zum Phosphoratom zu einer weiteren Koordination befähigt, was mittels DFT- und MP2-Rechnungen belegt wurde. Der Py(Bth)P--Ligand in [Me2Al{Py(Bth)P}] kann als doppelter Hart/Weich-Chelatligand bezeichnet werden. Das Me2Al+-Fragment koordiniert über die „harte Seite“ des Liganden (den Pyridylstickstoffatomen), während die „weiche Seite“ als P-S-Chelatligand weiterhin in der Lage sein sollte, weiche Übergangsmetallkomplexfragmente [M] zu stabilisieren. Diese Verbindung wurde zum Teil mit den obengenannten Methoden charakterisiert und sollte in weiter untersucht werden. Die durchgeführten DFT-Rechnungen lieferten nicht nur eine Möglichkeit der Interpretation von Schwingungsspektren, sondern erlaubten auch den Vergleich berechneter Molekülgeometrien mit Daten von Kristallstrukturanalysen und lieferten wichtige Antworten zu verschiedenen Problemstellungen. KW - Übergangsmetallkomplexe KW - Ligand KW - Fourier-Spektroskopie KW - Isotopieeffekt KW - Dichtefunktionalformalismus KW - FT-Raman KW - Infrarot KW - Spektroskopie KW - DFT KW - Vinyliden- KW - Ethylen- KW - Isonitril- KW - Carbonyl- KW - Thioaldehyd- KW - Silyl-Komplexen KW - Rhodium KW - Wolfram KW - Eisen KW - FT-Raman KW - infrared KW - spectroscopy KW - DFT calculations KW - vinylidene complexes KW - carbonyl complexes KW - ethylene complexes KW - isonitrile complexes Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-3101 ER - TY - THES A1 - Dietzek, Benjamin T1 - Ultrafast linear and non-linear spectroscopy : from biological light-receptors to artificial light-harvesting systems T1 - Ultraschnelle lineare und nicht-lineare Spektroskopie : Von biologischen Lichtrezeptoren zu künstlichen Lichtsammelsystemen N2 - In the experiments presented in this work, linear and non-linear femtosecond time-resolved spectrsocopy were applied to investigate the structure-function and functiondynamics relationship in biological and artificially designed systems. The experiments presented in this work utilize femtosecond time-resolved transient absorption and transient grating as well as picosecond time-resolved fluorescence spectroscopy to investigate the photophysics and photochemistry of biological photoreceptors and address the light-induced excited-state processes in a particular molecular device that serves as a - structurally - very simple light-harvesting antenna and potentially as a catalysis-switch for the production of hydrogen in solution. The combination of white-light probe transient absorption and coherent transient grating spectroscopies yields spectral information about the excited state absorption in concert with high quality, high signal-to-noise kinetic transients, which allow for precise fitting and therefore very accurate time-constants to be extracted from the data. The use of femtosecond time-resolved transient grating spectroscopy is relatively uncommon in addressing questions concerning the excited-state reaction pathways of complex (biological) systems, and therefore the experiments presented in this work constitute according to the literature the first studies applying this technique to a a metalloporphyrin and an artificial light-harvesting antenna. N2 - In der hier vorliegenden Arbeit wurden die Struktur- Funktions- und Funktions- Dynamik- Beziehungen in biologischen und künstlich synthetisierten Systemen untersucht. Hierfür wurden Femtosekunden zeitaufgelöste lineare und nicht-lineare spektroskopische Techniken verwendet. Mittels transienter Absorptions- und transienter Gitterspektroskopie sowie Pikosenkunden zeitaufgelöster Fluoresezenzmessungen wurden ausgewählte pflanzliche Photorezeptoren untersucht und die Relaxationsprozesse im angeregten Zustand einer artifiziellen Lichtsammelantenne charakterisiert. Die Kombination aus Femtosekundenzeitaufgelöster transienter Absorption unter Verwendung eines Weisslichtsuperkontinuums als Probepuls und kohärenter Vier-Wellen-Mischungs-Spektroskopie erlaubt es, breitbandige spektrale Informationen über einen photo-angeregten Zustand zu gewinnen und gleichzeitig Kinetiken mit einem sehr hohen Signal-Rausch-Verhältnis zu messen. Letztere erlauben einen präzisen Fit, und somit können sehr präzise charakteristische Zerfallskonstanten aus den zeitaufgelösten Daten rekonstruiert werden. Durch den komplexeren Versuchsaufbau eines Vier-Wellen-Mischungs-Experiments verglichen mit dem transienter Absorptionsspektroskopie ist die Verwendung von zeitaufgelöster transienter Gitterspektroskopie zur Untersuchung licht-induzierter Prozesse in komplexen biologischen Systemen noch immer relativ unüblich. Daher stellen die hier präsentierten Ergebnisse die ersten Experimente dar, in denen diese Technik zur Untersuchung von angeregter Zustandsrelaxation in einem Metalloporphyrin und einem künstlichen photosynthetischen Reaktionszentrum eingesetzt wurde. KW - Femtosekundenspektroskopie KW - Photorezeptor KW - Licht-Sammel-Komplex KW - Femtosekunden zeitaufgelöste Spektroskopie KW - biologische Photorezeptoren KW - Übergangsmetallkomplexe KW - künstliche Lichtsammelsysteme KW - femtosecond time-resolved spectroscopy KW - biological photoreceptors KW - transition metal complexes KW - artificial light harvesting systems Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-15684 ER - TY - THES A1 - Schüßler, Thomas T1 - Photodissoziation und dissoziative Photoionisation von Kohlenwasserstoff-Radikalen T1 - Photodissociation and dissociative photoionisation of hydrocarbon radicals N2 - In dieser Arbeit wurde das Dissoziationsverhalten kleiner organischer Kohlenwasserstoffradikale untersucht. Zum einen wurde die dissoziative Photoionisation des Allyl-, Propargyl- und Ethylradikals durch die Verbindung einer herkömmlichen, gepulsten Pyrolysequelle mit Synchrotronstrahlung untersucht. Zum anderen wurden von verschiedenen Propyl- und Butyl-Radikalisomeren die Raten des Wasserstoffverlustes bei Anregung mit 239 nm gemessen. Es konnte gezeigt werden, dass die Kombination einer gepulsten Radikalquelle mit Synchrotronstrahlung technisch umsetzbar ist. Der Vorteil dieser Methode liegt darin, dass es möglich ist, die Radikale über einen kontinuierlichen Energiebereich von mehreren eV innerhalb kurzer Zeit zu betrachten, was mit einem normalen Labor-Aufbau mit Farbstofflasern nicht möglich ist. So konnten anhand von Photoelektronenspektren und Photoionisationseffizienzkurven die Ionisierungsenergie des Allyl-, des Propargyl- und des Ethyl-Radikals in guter Übereinstimmung zu älteren Literaturdaten bestätigt werden. Anhand von Messungen zur dissoziativen Photoionisation konnte gezeigt werden, dass das Allyl und das Ethyl wie angenommen ein Wasserstoff-Molekül abspalten. Beim Allyl gibt es hierbei zwei mögliche Dissoziationsprodukte: das Cyclopropyl- und das Propargyl-Kation. Einfache RRKM-Rechnungen deuten darauf hin, dass bei geringen Überschussenergien das Cyclopropenyl-, bei größeren hingegen bevorzugt das Propargyl-Kation gebildet wird. Das Ethyl-System besitzt einen nicht-klassischen, überbrückten ionischen Zustand. Die dissoziative Photoionisation führt zum Vinyl-Kation und setzt bei deutlich höheren Energien ein, als von der Theorie vorhergesagt. Alle Erklärungsversuche sind unbefriedigend, daher sollten hier weitere experimentelle und theoretische Untersuchungen angeschlossen werden. Die dissoziative Photoionisation des Propargyl-Radikals besitzt, theoretischen Berechnungen zufolge, zwei konkurrierende Zerfallskanäle. Wie die Experimente jedoch zeigten, erfolgt nur die Abspaltung von H unter Bildung des Cyclopropenyliden-Kations im vorhergesagten Energiebereich. Der Konkurrenzprozess, Bildung von Propinyliden und H$_2$, setzt erst bei deutlich höheren Photonenenergien ein. Daneben konnte erstmals der Dreikörperzerfall des Propargylbromids und des Ethyliodids zum Propinyliden- respektive Vinyl-Kation beobachtet und die Auftrittsenergien bestimmt werden. Diese stimmen gut mit den thermochemischen Vorhersagen überein. In Zukunft ist geplant, mit ZEKE-Spektroskopie die Ionisierungsenergien der untersuchten Radikale exakt zu bestimmen. Insbesondere beim Ethyl-Radikal mit seinem nicht-klassischen Verhalten muss noch viel geklärt werden. Des Weiteren ist geplant, weitere Experimente am Synchrotron durchzuführen. Denkbar wäre hier, Ionen in definierten, schwingungsangeregten Zuständen zu erzeugen und an ihnen Ionen-Molekül-Reaktionen durchzuführen. Ausgehend von den jeweiligen Azoalkanen wurden die Wasserstoff-Disso"-zia"-tions"-raten der \n-Propyl-, \n-Butyl- und \sec-Butyl-Radikale bei einer Anregungswellenlänge von 239 nm gemessen. Ähnlich wie dies bereits bei früheren Messungen am \tert-Butyl- und Ethyl-Radikal der Fall war, waren diese Raten um 2--3 Größenordnungen schneller als von einfachen RRKM-Rechnungen vorhergesagt. %Eine mögliche Erklärung wäre ein konkurrierender %Deaktivierungskanal, z.B.\ der C--C-Bindungsbruch im Radikal. Da %jedoch der Wasserstoffverlust von einem der Spaltprodukte nicht in %einem Einphotonenprozess zu bewerkstelligen ist, muss dieser Kanal %ausgeschlossen werden. Ein anderer, noch sehr spekulativer %Erklärungsversuch geht von einem langlebigen 3p-Zustand, der ein %Minimum in der Geometrie mit einer verlängerten C--C-Bindung %darstellt, aus. Koppelt dieser Zustand mit dem darunterliegenden %3s-Zustand, kann es zur Deaktivierung kommen, jedoch nur, wenn die %Überschussenergie ausreichend groß ist. Dies würde das Verhalten der %Dissoziationsrate bei den Propyl- und Butyl-Radikalisomeren sowie dem %Ethylradikal erklären. Es wurde eine sehr spekulative Erklärung vorgestellt, die dieses Verhalten erklären könnte. Die vorliegenden Daten können diese Theorie aber weder bestätigen noch widerlegen. Es sieht jedoch so aus, als ob diese Diskrepanz zwischen Theorie und Experiment ein allgemeines Phänomen in Alkylradikalen darstellt. Um diese Theorie weiter zu erhärten, kann man einerseits noch weitere Alkylradikale untersuchen, ob sie ähnliche Differenzen zwischen Experiment und Theorie zeigen. Andererseits sollten auch bei den Propyl- und Butylradikalen Experimente mit unterschiedlichen Anregungswellenlängen durchgeführt werden um zu klären, ob sie sich analog zum \tert-Butyl- und Ethylradikal verhalten. N2 - In this work the dissociation behaviour of small organic hydrocarbon radicals was investigated. On the one hand the dissociative photoionisation of the allyl, propargyl and ethyl radicals was investigated by the combination of a conventional, pulsed radical source with synchrotron radiation. On the other hand the rates of hydrogen loss from various propyl and butyl isomers were measured with an excitation wavelength of 239 nm. It could be shown that the combination of a pulsed radical source with synchrotron radiation is technically possible. The advantage of this method is the possibility to investigate radicals over a continuous energy range of several eV within a short duration. This is not possible with a normal laboratory setup. By means of the photoelectron spectra and photoion efficiency curves the ionisation potentials of the allyl, propargyl and ethyl radicals could be measured in good agreement with older literature data. It could be shown that the allyl and the ethyl lose a hydrogen molecule -- as suspected -- upon dissociative photoionisation. For the allyl there are two possible dissociation products: the cyclopropenyl and the propargyl cations. Simple RRKM calculations indicate that at low excess energies the cyclopropenyl, and at higher excess energies the propargyl cation is formed preferentially. The ethyl system has a non-classical bridged ionic state. The dissociative photoionisation leads to the vinyl cation and starts at much higher energies than predicted by theory. All explanation attempts are unsatisfying. Therefore further experimental and theoretical studies should consecute. The dissociative photoionisation of the propargyl radical has, according to theoretical studies, two competing decay channels. But the experiments showed that only the loss of H and the formation of the cyclopropenylidene cation occurs in the predicted energy range. The competing channel, loss of H$_2$ and formation of propenylidene, starts at much higher photon energies. Besides this the three body decay of the propargylbromide and the ethyl\-iodide to the propinylidene and the vinyl cations could be observed. The appearence energies could also be measured. They are in good agreement with thermochemical predictions. For the future it is planned to determine the ionisation potentials of the observed radicals exactly with ZEKE spectroscopy. Especially the ethyl radical with its non-classical behaviour needs further examination. Furthermore it is planned to do additional experiments at the synchrotron. It is thinkable to produce ions in well-defined, vibrationally excited states to carry out ion-molecule reactions with them. The hydrogen dissociation rates of the \n-propyl, \n-butyl and \sec-butyl radicals were measured with an excitation wavelength of 239 nm. Similar to earlier measurements with the \tert-butyl and ethyl radicals the observed rates were \mbox{faster} in the order of 2--3 magnitudes than predicted by simple RRKM calculations. A very speculative explanation was presented that could explain this behaviour. The available data can neither confirm nor disprove this theory. It seems that this discrepancy between experiment and theory is a common phenomenon in alkyl radicals. To substantiate this theory more alkyl radicals could be examined for this difference between experiment and theory. But also for the propyl and butyl radical isomers experiments with different excitation wavelengths should be carried out. KW - Photodissoziation KW - Photoionisation KW - Allylradikal KW - Ethylradikal KW - Photodissoziation KW - Photoionisation KW - Allyl KW - Propargyl KW - Ethyl KW - photodissociation KW - photoionisation KW - allyl KW - propargyl KW - ethyl Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-18563 ER - TY - THES A1 - Maksimenka, Raman T1 - Techniques in frequency conversion and time-resolved spectroscopy with nonlinear optical processes in the femtosecond regime T1 - Techniken der Frequenzumwandlung und der zeitaufgelösten Spektroskopie mit nichtlinearen optischen Prozessen im Femtosekunden-Regime N2 - Nichtlineare Frequenzumsetzung der niederenergetischen femtosekunden Laserpulsen wurde in den Festkörpermitteln nachgeforscht. Ramanumwandlung im weiss-Licht-freien Regime des impulsiven stimulierten Raman Streuungs wurde erzielt, indem man KGW-Kristall mit den Bessel-Lichtstrahl pumpte. Leistungs-fähiges Superkontinuumerzeugung wurde für die sub-microjule Pulse demonstriert, die in Mikrostrukturfaser fokussiert wurden. Anwendung von Vier-Wellen-Mischung Techniken zur Überwachung der Aufregenzustandsdynamik in den mehratomigen Molekülen wurde demonstriert. Zeitkonstanten der Prozesse, die auf Schwingungsenergiewiederverteilung nach dem ursprunglichen Photoanregung von Stilben-3 bezogen wurden, wurden mittels der Pump-CARS Technik festgestellt, in der CARS-Prozess als wirkungsvoller Modus-vorgewählter Filter diente. Spektrale sowie zeitliche Eigenschaften der elektronischen Entspannungbahnen in den Azulenderivats wurden erforscht, indem man vergänglichen-Bevölkerungs-Gittern und Pump-Probe vergänglichen Absorptions Techniken verwendete. N2 - Nonlinear frequency conversion of low-energy fs laser pulses was investigated in solid-state media. Raman conversion in the white-light-free regime of impulsive stimulated Raman scattering was achieved by pumping KGW crystal with Bessel beam. Efficient supercontinuum generation was demonstrated for sub-microjule pulses focused into microstructure fiber. Application of four-wave mixing techniques to monitoring of the excited-state dynamics in polyatomic molecules was demonstrated. Time constants of the processes related to vibrational energy redistribution upon the initial photoexcitation of stilbene-3 were determined by means of pump-CARS technique, where CARS process served as an effective mode-selective filter. Spectral as well as temporal properties of electronic relaxation pathway in azulene derivatives were explored by using transient population gratings and pump-probe transient absorption techniques. KW - Frequenzumsetzung KW - Femtosekundenspektroskopie KW - Nichtlineare Optik KW - Frequenzumwandlung KW - Femtosekunden Spektroskopie KW - ISRS KW - Pump-CARS KW - nichtlineare Optik KW - frequency conversion KW - femtosecond spectroscopy KW - ISRS KW - pump-CARS KW - nonlinear optics Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14087 ER - TY - THES A1 - Zierhut, Matthias T1 - Wasserstoffatomdynamik in Radikalen, Clustern und Biomolekülen T1 - Hydrogen atom dynamics in radicals, clusters and biomolecules N2 - Die Untersuchung der molekularen Dynamik elektronisch angeregter Moleküle stand im Zentrum dieser Arbeit. In vielen Fällen ist die Dynamik dieser Zustände mit einer Bewegung von Wasserstoffatomen assoziiert. Mittels zeit- und frequenzaufgelöster Photofragmentspektroskopie lassen sich Aussagen über die Energieumverteilung während der Dissoziation und über die Geschwindigkeit der Wasserstoffatomabstraktion treffen. Die Ergebnisse solcher Messungen können als Grundlage für die Diskussion der molekularen Reaktionsdynamik und als Prüfstein für theoretische Berechnungen dienen. Theoretische Vorhersagen weisen der Wasserstoffatomdynamik eine enorme Bedeutung für die Photochemie von Biomolekülen zu. Unter den Biomolekülen nimmt die Untersuchung der Photochemie und der Photophysik isolierter DNA-Basen eine herausragende Stellung ein. Diese Untersuchungen sind dabei stark von der Hoffnung auf ein besseres Verständnis der Entstehung von Strahlungsschäden motiviert, die letztendlich zu Hautkrebs führen können. Die Frage, ob jeder Baustein der DNA potentiell photostabil ist, wurde im Rahmen dieser Arbeit für die DNA-Base Adenin untersucht. Die Experimente erfolgten an isolierten Molekülen in der Gasphase, so dass es möglich war, die intrinsischen Eigenschaften von Adenin zu untersuchen. Es konnte dabei gezeigt werden, dass Adenin nach Bestrahlung mit UV-Licht vornehmlich das N9-H-Wasserstoffatom abspaltet und diese Abspaltung extrem schnell verläuft. Dies steht in Einklang mit einem Deaktivierungsprozess über eine repulsive Potentialkurve, wie er theoretisch vorhergesagt worden war. In natürlicher Umgebung, d.h. in wässriger Lösung, sind Wasserstoffatome, die in der Gasphase unter UV-Stress abdissoziieren, in Wasserstoffbrückenbindungen zu Solvensmolekülen oder in das Makromolekül eingebunden. Daher kann Bestrahlung zu Wasserstoffatom- oder Protonentransfer führen. Die Frage, ob nach UV-Anregung photoacide Verbindungen wie Phenol oder Naphthol ein Wasserstoffatom oder ein Proton an Solvensmoleküle übergeben, steht derzeit im Mittelpunkt lebhafter wissenschaftlicher Diskussion. Für das Verständnis der Photoacidität ist die Kenntnis der Schwingungsstruktur, v.a. der intermolekularen Schwingungen, von Phenol- bzw. Naphthol-Wasser-Clustern unerlässlich. Für den Naphthol/(H2O)1-Cluster konnten für den ersten elektronisch angeregten Zustand alle intermolekularen in plane Schwingungen nachgewiesen werden. Wasserstoffatomdynamik ist nicht nur für geschlossenschalige Biomoleküle wie Adenin oder wasserstoffbrückengebundene Cluster von Bedeutung, sondern auch für offenschalige organische Radikale. Alkylradikale sind dabei als reaktive Intermediate u.a. in chemischenVerbrennungsprozessen äußerst wichtig. Für das hier untersuchte tert-Butylradikal konnte ein Wasserstoffverlust beobachtet werden. Dieser verlief bei niedrigen Anregungsenergien gemäß statistischer Vorhersagen, bei höheren Anregungsenergien jedoch deutlich langsamer als aus einfachen statistischen Modellen zu erwarten wäre. Diese Ergebnisse könnten sich mit einem bisher nicht identifizierten elektronischen Zustand erklären lassen, der eine Rolle in der Photochemie bzw. Photodissoziationsdynamik spielt und möglicherweise von allgemeiner Bedeutung für die Photophysik von Alkylradikalen ist. Zukünftige Arbeiten werden die Untersuchungen der Wasserstoffatomdynamik der im Rahmen dieser Arbeit untersuchten Systeme vertiefen und auf weitere relevante Moleküle (Thymin, Cytosin, Guanin, Uracil, primäre und sekundäre Alkylradikale) ausdehnen. N2 - The investigation of the molecular dynamics of electronically excited molecules was the main subject of this work. The dynamics of these states is often associated with a motion of hydrogen atoms. Time- and frequency-resolved H-atom photofragment spectroscopy is able to provide information about the energy redistribution during the dissociation and about the rate of the hydrogen abstraction. The results of such measurements can be used as a basis for the discussion of molecular reaction dynamics and for testing theoretical calculations. Theoretical predictions assume, that the dynamics of hydrogen atoms is very important for the photochemistry of biomolecules. Among biomolecules the investigation of the photochemistry and photophysics of isolated DNA-bases is of outstanding importance. The investigations are motivated by the hope to understand better, how radiation damage takes place that finally leads to skin cancer. The question, whether every building block of the DNA is itself photostabile, was studied in the case of adenine. Within this work the photodissociation dynamics of the DNA base adenine was investigated. The experiments were carried out on isolated molecules in the gas phase, which allowed to study the intrinsic properties of adenine. It was shown that adenine looses preferentially the N9-hydrogen atom upon UV-irradation and that the dissociation is extremely fast. These results are consistent with a decay mechanism proceeding via a repulsive potential energy curve as theoretically predicted. In natural environment, i.e. in aqueous solution, the H-atoms that dissociate in the gas phase upon UV-irridation are bound via hydrogen bonds to the solvent molecules or to neighbouring building blocks like in the case of DNA bases. Thus UV excitation can lead to H-atom or proton transfer reactions. The question, whether photoacidic molecules like phenol or naphthol give a H-atom or a proton to the solvent, is a topic of current interest. To understand photoacidity the knowledge of the vibrational structure of phenol or naphthol clusters, in particular the intermolecular vibrations, is essential. For the naphthol/(H2O)1 cluster all of the inter-molecular in plane vibrations of the first electronic excited state were identified. H-atom or proton transfer dynamics is not only relevant in biomolecules or hydrogen-bonded clusters, but also in open shell organic radicals. Alkyl radicals are for example important intermediates in combustion processes. For the tert-butyl radical studied here, hydrogen loss was observed. At low excitation energies the rates of the H-atom loss were in agreement with statistical predictions, however at higher energies the rates were slower than expected from statistical considerations. These results might be explained with a still unidentified electronic state that plays a role in the photochemistry and photodissociation dynamics. It could also be possible that this state is of general importance for the photophysics of alkyl radicals. Future work will provide a deeper insight in the H-atom dynamics of the molecules examined within the scope of this work and extend to other relevant molecules (thymine, cytosine, guanine, uracile, primary and secondary alkyl radicals). KW - Wasserstoffatom KW - Molekulardynamik KW - REMPI KW - ZEKE KW - SHB KW - Photodissoziation KW - REMPI KW - ZEKE KW - SHB KW - photodissociation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-11941 ER - TY - THES A1 - Erdmann, Marco T1 - Coupled electron and nuclear dynamics in model systems T1 - Gekoppelte Elektronen- und Kerndynamik in Modellsystemen N2 - Subject of this work was to investigate the influence of nonadiabatic coupling on the dynamical changes of electron and nuclear density. The properties of electron density have neither been discussed in the stationary case, nor for excited electronic states or for a coupled electronic and nuclear motion. In order to remove these restrictions one must describe the quantum mechanical motion of all particles in a system at the same level. This is only possible for very small systems. A model system developed by Shin and Metiu [1, 2] contains all necessary physical ingredients to describe a combined electronic and nuclear motion. It consists of a single nuclear and electronic degree of freedom and the particle interaction is parameterized in such a way as to allow for a facile switching between and adiabatic (Born-Oppenheimer type) and a strongly coupled dynamics. The first part of the work determined the “static” properties of the model system: The calculation of electronic eigenfunctions, adiabatic potential curves, kinetic coupling elements and transition dipole moments allowed for a prediction of the coupled dynamics. The potentials obtained from different parameterization showed two distinct cases: In the first case the ground and first excited state are separated by a large energy gap which is the typical Born-Oppenheimer case; the second one exhibits an avoided crossing which results in a breakdown of the adiabatic approximation. Due to the electronic properties of the system, the quantum dynamics in the two distinct situations is very different. This was illustrated by calculating nuclear and electron densities as a function of time. In the Born-Oppenheimer case, the electron density followed the vibrational motion of the nucleus. This was demonstrated in two examples. In the strongly coupled case the wave packet did not exhibit features caused by nonadiabatic coupling. However, projections of the wave function onto the electronic states revealed the usual picture obtained from solutions of the nuclear Schrödinger equation involving coupled electronic states. In that case the nuclear motion triggered charge transfer via nonadiabatic coupling. The second part of the work demonstrated that the model system can easily be modified to yield binding situations often found in diatomic molecules. The different situations can be characterized in terms of bound and dissociative adiabatic potential curves. The investigation focussed on the case of an electronic predissociation, where the ground state is dissociative in the asymptotic limit of large internuclear distances. Within our model system we were able to demonstrate how the character of the electron density changes during the fragmentation process. In the third part we investigated the influence of external fields on the correlated dynamics of electron and nucleus. Employing adiabatic potential curves, the structure of absorption spectra can be understood within the weak-field limit. In the above described Born-Oppenheimer case the adiabatically calculated spectrum was in very good agreement with the exact one, whereas in the strongly coupled case the obtained spectrum was not able to resemble the exact one. Regarding the dynamics during a laser excitation process the time-dependent electron and nuclear densities nicely illustrated the famous Franck-Condon principle. The interaction with strong laser pulses lead to an excitation of many bound electronic and vibrational states. The electron density reflected the classical-like quiver motion of the electron induced by the fast variations of the electric field. The nucleus did not follow these fast oscillations because of its much larger mass. The last part of the work extended the original model system by including an additional electron. As a consequence of the Pauli principle, the spatial electronic wave function has to be either symmetric or anti-symmetric with respect to exchange of the two electrons. This corresponds to anti-parallel or parallel electron spins, respectively. The extended model already contains the physical properties of a many-electron system. Solving the time-dependent Schrödinger equation for a typical vibrational wave packet motion clearly indicated that the electron density is no longer suited to “localize” single electrons. We extended the definition of the electron localization function (ELF) to an exact, time-dependent wave function and demonstrated, how the ELF can be used to further characterize a coupled electron and nuclear motion. Finally, we gave an outlook of how to define electron localization in the case of anti-parallel electron spins. We derived a quantity similar to the ELF denoted “anti-parallel spin electron localization function” (ALF) and demonstrated that the ALF allows to follow time-dependent changes of the electron localization in a numerical example. [1] S. Shin, H. Metiu, J. Chem. Phys. 1995, 102, 9285. [2] S. Shin, H. Metiu, J. Phys. Chem. 1996, 100, 7867. N2 - Gegenstand dieser Arbeit war es, den Einfluss nichtadiabatischer Kopplung auf die dynamischen Änderungen von Elektronen- und Kerndichten zu untersuchen. Die Eigenschaften der Elektronendichte wurden bislang weder für den nicht-stationären Fall, noch für angeregte elektronische Zustände oder für eine gekoppelte Elektronen- und Kerndynamik diskutiert. Diese Einschränkungen lassen sich beseitigen, indem man die quantenmechanische Bewegung aller Teilchen eines Systems auf dem gleichen Niveau beschreibt. Dies ist nur für sehr kleine Systeme überhaupt möglich. Ein Modellsystem, das von Shin und Metiu [1, 2] entwickelt wurde, erfüllt alle notwendigen physikalischen Vorraussetzungen, um eine gekoppelte Elektronen- und Kernbewegung zu beschreiben. Das Modell enthält jeweils nur einen Freiheitsgrad für Kern und Elektron, und die Parametrisierung der Teilchenwechselwirkung ermöglicht den flexiblen Wechsel von adiabatischer (Born-Oppenheimer-Fall) zu stark gekoppelter Dynamik. Der erste Teil der Arbeit untersuchte die „statischen“ Eigenschaften des Modellsystems: Die Berechnung elektronischer Eigenfunktionen, adiabatischer Potentialkurven, kinetischer Kopplungselemente und Übergangsdipolmomente erlaubte gewisse Vorhersagen über die zu erwartende, gekoppelte Dynamik. Die Potentiale, die man für verschiedene Parametrisierung erhielt, zeigten zwei deutlich unterschiedliche Fälle: Im ersten Fall, einer gültigen Born-Oppenheimer-Näherung, sind der Grund- und erste angeregte Zustand durch eine große Energielücke voneinander getrennt. Der zweite Fall zeigt eine vermiedene Kreuzung, die zu einem Versagen der adiabatischen Näherung führt. Aufgrund der elektronischen Eigenschaften des Systems, unterscheidet sich die Quantendynamik in den beiden betrachteten Fällen grundlegend, wie durch die Berechnung zeitabhängiger Kern- und Elektronendichten veranschaulicht wurde. Im Born-Oppenheimer-Fall folgte die Änderung der Elektronendichte der Schwingungsbewegung des Kerns. Im Falle starker Kopplung zeigte das Wellenpaket keine Anzeichen einer nichtadiabatischen Kopplung. Die Projektionen der Wellenfunktion auf die elektronischen Zustände enthüllten jedoch das übliche Bild, das man aus der Lösung der Schrödingergleichung der Kerne für gekoppelte elektronische Zustände erhält. In diesem Fall verursachte die Kernbewegung einen Ladungstransfer aufgrund nichtadiabatischer Kopplung. Der zweite Teil der Arbeit zeigte, dass das Modellsystem leicht modifiziert werden kann, um in zweiatomigen Molekülen vorhandene Bindungssituationen zu simulieren. Die verschiedenen Fälle sind durch gebundene und dissoziative adiabatische Potentialkurven charakterisiert. Die Untersuchungen konzentrierten sich auf den Fall einer elektronischen Prädissoziation, d.h. der Grundzustand ist dissoziativ für große Kernabstände. Innerhalb unseres Modellsystems konnten wir zeigen, wie sich die Elektronendichte während des Fragmentierungsprozesses ändert. Im dritten Teil untersuchten wir den Einfluss externer elektrischer Felder auf die korrelierte Elektronen- und Kernbewegung. Mit Hilfe adiabatischer Potentiale kann die Struktur von Absorptionsspektren im Falle schwacher Felder verstanden werden. Für den oben beschriebenen Fall gültiger Born-Oppenheimer-Näherung, stimmte das adiabatisch berechnete Spektrum sehr gut mit dem exakten überein. Für den Fall starker nichtadiabatischer Kopplung zeigte das erhaltene Spektrum keine Übereinstimmung mit dem exakt berechneten. Die Berechnung zeitabhängiger Elektronen- und Kerndichten, während der Wechselwirkung mit einem Laserfeld, veranschaulichte deutlich das Franck-Condon-Prinzip. Die Wechselwirkung mit einem intensiven Laserpuls führte zur Anregung vieler gebundener elektronischer und Schwingungszustände. Die Elektronendichte zeigte die einer klassischen Bewegung sehr ähnliche Zitterbewegung des Elektrons, die durch die schnellen Änderungen des elektrischen Feldes hervorgerufen wird. Der Kern folgte aufgrund seiner wesentlich höheren Masse diesen schnellen Oszillationen nicht. Der letzte Teil der Arbeit erweiterte das ursprüngliche Modell durch Hinzufügen eines weiteren Elektrons. Als Konsequenz des Pauli-Prinzips muss die Ortsraumwellenfunktion entweder symmetrisch oder antisymmetrisch bezüglich Austausches der beiden Elektronen sein. Dies entspricht antiparallelen, bzw. parallelen Elektronenspins. Das erweiterte Modell enthält bereits die physikalischen Eigenschaften eines Mehrelektronensystems. Das Lösen der Schrödingergleichung für eine Schwingungsbewegung des Kerns legte nahe, dass sich die Elektronendichte nicht eignet, die Lokalisierung der Elektronen zu charakterisieren. Wir erweiterten deshalb die Definition der Elektronenlokalisierungsfunktion (ELF) auf eine exakte, zeitabhängige Wellenfunktion und untersuchten, inwieweit sich die ELF eignet, eine gekoppelte Elektronen- und Kernbewegung genauer zu analysieren. Am Ende der Arbeit folgte ein Ausblick, wie Elektronenlokalisierung im Falle antiparalleler Elektronenspins definiert werden kann. Die von uns abgeleitete „Elektronenlokalisierungsfunktion für antiparallelen Spin“ (ALF) erlaubt es, die zeitabhängige Änderung der Elektronenlokalisierung zu beobachten, wie wir an einem numerischen Beispiel verdeutlichen konnten. [1] S. Shin, H. Metiu, J. Chem. Phys. 1995, 102, 9285. [2] S. Shin, H. Metiu, J. Phys. Chem. 1996, 100, 7867. KW - Nichtadiabatischer Prozess KW - Quantenelektrodynamik KW - Quantendynamik KW - nichtadiabatische Kopplung KW - exakte Wellenfunktion KW - Elektronenlokalisierung KW - quantum dynamics KW - nonadiabatic coupling KW - exact wave function KW - electron localization Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-9968 ER - TY - THES A1 - Bradeanu, Ioana Lavinia T1 - Photoionization and excitation of free variable size van der Waals clusters in the inner shell regime T1 - Photoionisation und Anregung von van der Waals Clustern variabler Größe im Bereich der Innerschalenanregung N2 - The studies presented in this thesis deal with resonant and non-resonant excitation of free variable size clusters using synchrotron radiation in the soft X-ray regime. The post collision interaction (PCI) effect is investigated in free variable size krypton and argon clusters near the Kr 3d and Ar 2p ionization energies. The core ionization energies of surface and bulk sites in variable size clusters can be clearly distinguished. This is mostly due to the polarization screening. It is found that the asymmetry, which is a consequence of PCI, is characteristically smaller for clusters than for isolated atoms. Moreover, there is less asymmetry for bulk sites than for surface sites in variable size rare gas clusters. We assign the results in terms of mechanisms that are based on quantum mechanical models of post collision interaction. Complementary experiments on the photoionization of free van der Waals clusters are performed by using zero kinetic energy (ZEKE) photoelectron spectroscopy in the Ar 2p-, Kr 3d-, Ne 1s-, and N2-regimes. The experimental approach is also suitable to detect cluster size dependent changes in electronic structure. This also allows us to study post collision interaction in variable size clusters. The parameters of the PCI profiles deduced for ZEKE experiments indicate that there are no significant changes in core ionization dynamics compared to near-threshold experiments. Results from model calculations in Kr 3d ionization energy indicate that different geometric sites can be clearly distinguished from each other by their substantial shift in Kr 3d ionization energy, though the dimer shows almost the same Kr 3d ionization energy as the free atom. A comparison with the experimental results indicates that there is resemblance with the model calculations, even though close-lying ionization energies are blended and require deconvolutions of the experimental spectra. It is evident from the present work that one can observe distinct shifts in core ionization energies in van der Waals clusters that are formed in wide size distributions of a jet expansion. The emission of ultraviolet fluorescence radiation from variable size argon clusters is investigated with high spectral resolution in the Ar 2p-excitation regime. The fluorescence excitation spectra reveal strong fluorescence intensity in the Ar 2p-continuum, but no evidence for the occurrence of discrete low-lying core-exciton states in the near-edge regime. This finding is different from the absorption and photoionization cross sections of argon clusters and the solid. The dispersed fluorescence shows a broad molecular band centered near 280 nm. The present results are consistent with the formation of singly charged, excited moieties within the clusters, which are assigned as sources of the radiative relaxation in the 280 nm regime. A fast energy transfer process (interatomic Coulombic decay, ICD) is assigned to be primarily the origin of these singly charged, excited cations besides intra-cluster electron impact ionization by Auger electrons. Our findings give possibly the first experimental evidence for ICD in the core level regime. Free, variable size nitrogen clusters are investigated in the N 1s excitation regime in comparison with the free molecule and solid nitrogen. The conversion of Rydberg states into core excitons, surface and bulk, was studied. The experimental results are simulated by ab initio calculations using (N2)13 as a reasonable prototype cluster structure that allows us to simulate both surface and bulk properties in comparison with the isolated molecule. The present results clearly show that there are specific properties, such as molecular orientation, in molecular van der Waals clusters, which do not exist in atomic van der Waals clusters. It is shown that inner and outer surface sites give rise to distinct energy shifts of the low lying surface core excitons. N2 - In der vorliegenden Dissertation wurden Experimente zur resonanten und nicht-resonanten Anregung von Clustern variabler Größe durchgeführt. Hierzu kam Synchrotronstrahlung im weichen Röntgenbereich zum Einsatz. Der "Post-Collision Interaction"-Effekt (PCI) wurde im Detail am Beispiel von Krypton und Argon-Clustern im Bereich der Kr 3d- und Ar 2p-Anregung studiert. Es lassen sich die Ionisierungsenergien von Atomen, die an der Oberfläche bzw. im Volumen gebunden sind, klar unterscheiden. Dies ist aufgrund der unterschiedlichen Polarisationsabschirmung möglich, die zu einer Verschiebung der Innerschalen-Ionisierungsenergien führt. Die Linienformen der Photoelektronenbanden werden asymmetrisch, wenn die Anregungsenergie geringfügig über der Ionisierungsenergie liegt. Dies lässt sich auf den PCI-Effekt zurückführen. Es wird beobachtet, dass die Asymmetrie vom isolierten Atom über Oberflächenatome zu den im Volumen gebundenen Atomen abnimmt. Diese Veränderung der Linienformen wird mit Hilfe von Mechanismen, die auf Grundlage von quantenmechanischen Modellen basieren, interpretiert. Komplementäre Experimente wurden an Argon- und Neon-Clustern zur Nullvolt-Photoelektronen-Spektroskopie (ZEKE) durchgeführt (Anregung der Ar 2p-Kante, Kr 3d-Kante, N2 1s und Ne 1s-Kante). Auch mit diesem Ansatz lassen sich größenabhängige Veränderungen der elektronischen Struktur in Clustern sowie die Bedeutung des PCI Effektes bestimmen. Ein Vergleich dieser Resultate mit der Anregung, die nahe der Ionisationsschwelle liegt, zeigt, dass es zu keiner signifikanten Veränderung der Ionisationsdynamik als Funktion der Anregungsenergie kommt. Berechnungen zur Ioniserungsenergien von Krypton-Clustern im Bereich der Kr 3d-Anregung zeigen, dass sich einzelne geometrische Orte klar in ihrer Ionisierungsenergie unterscheiden. Das Krypton-Dimer zeigt allerdings fast dieselbe 3d-Ioniserungsenergie wie das freie Atom. Der Vergleich mit den experimentellen Resultaten zeigt, dass eine gute übereinstimmung zwischen Modell und Experiment besteht. Allerdings müssen die experimentellen Spektren entfaltet werden, da die relativen Verschiebungen der Ionisierungsenergien zu gering sind und die Rumpflochlebensdauer zu einer Verbreiterung der Banden führt. Die Resultate belegen, dass sich ausgezeichnete Werte für Rumpfniveau-Ionisierungsenergien bestimmen lassen, obwohl die Cluster in breiten Größenverteilungen vorliegen. Dies lässt sich durch die ortsspezifische Photoionisation erklären. Die Emission von Fluoreszenzstrahlung im ultravioletten Spektralbereich nach Rumpfniveauanregung wurde im Fall von 2p-angeregten Argon-Clustern untersucht. Die hochaufgel östen Spektren zeigen hohe Intensität im 2p-Kontinuum, jedoch keinen Hinweis auf signifikante Beiträge im Bereich der Rumpfniveau-Excitonen. Dieses Ergebnis unterscheidet sich vom Absoprtions- und Photoionisationsquerschnitt von Argon-Clustern sowie festem Argon. Die dispergierte Fluoreszenz liefert eine intensive Bande bei 280 nm. Dieses Resultat lässt sich mit der Fluoreszenz von einfach geladenen, angeregten Argon-Clustern erklären. Die Bildung von einfach geladenen Ionen nach primärer Doppelionisation im Ar 2p-Kontinuum wird durch einen schnellen Energietransfer-Prozess (Interatomic Coulombic Decay, ICD) erklärt. Er läuft nach der Rumpfniveauanregung ab und liefert, neben der Elektronenstoßionisation durch schnelle Auger-Elektronen, einfach geladene Clusterfragmente, die nachfolgend strahlend relaxieren. Dieses Ergebnis ist als erster Hinweis darauf zu werten, dass der ICD-Prozess auch im Bereich der Innerschalenanregung auftritt. Freie Stickstoff-Cluster variabler Größe wurden im Bereich der N 1s-Anregung untersucht. Hier stand die Umwandlung der Rydberg-Zustände in die entsprechenden Oberflächen- und Volumen-Excitonen in Fokus der Studien. Die Resultate wurden mit denen zu freiem und kondensiertem Stickstoff verglichen. Die experimentellen Resultate lassen auch einen Vergleich mit ab initio Rechnungen zu, wofür (N2)13 als Prototyp-Cluster genutzt wurde, da hier sowohl oberflähen - als auch volumengebundene Moleküle auftreten. Diese Resultate zeigen signifikante Unterschiede im Vergleich zu atomaren Clustern. Es zeigt sich, dass die molekulare Orientierung die Lage der Excitonenbanden beeinflusßt. Ebenso treten signifikante Energieverschiebungen relativ zum isolierten Molekül auf, die sich durch Absorption von Zentren erklären lassen, die entweder auf der inneren bzw. äußeren Oberfläche der Cluster gebunden sind. KW - Photoionisation KW - Van-der-Waals-Cluster KW - Photoelektronenspektroskopie KW - Photoelektronen-Spektroskopie KW - van der Waals Clustern KW - Rumpfniveauanregung KW - PCI KW - ICD KW - photoelectron spectroscopy KW - van der Waals clusters KW - core level excitation KW - PCI KW - ICD Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-16372 ER - TY - THES A1 - Gräfe, Stefanie T1 - Laser-control of molecular dynamics T1 - Lasergesteuerte Kontrolle molekularer Dynamik N2 - In this work a new algorithm to determine quantum control fields from the instantaneous response of systems has been developed. The derived fields allow to establish a direct connection between the applied perturbation and the molecular dynamics. The principle is most easily illustrated in regarding a classical forced oscillator. A particle moving inside the respective potential is accelerated if an external field is applied acting in the same direction as its momentum (heating). In contrary, a deceleration is achieved by a field acting in the opposite direction as the momentum (cooling). Furthermore, when the particle reaches a classical turning point and then changes its direction, the sign of the field has to be changed to further drive the system in the desired way. The frequency of the field therefore is in resonance with the oscillator. This intuitively clear picture of a driven classical oscillator can be used for directing (or controlling) quantum mechanical wave packet motion. The efficiency of the instantaneous dynamics algorithm was demonstrated in treating various model problems, the population transfer in double well potentials, excitation and dissociation of selective modes, and the population transfer between electronic states. Although it was not tried to optimize the fields to gain higher yields, the control was found to be very efficient. Driving population transfer in a double well potential could be shown to take place with nearly 100% efficiency. It was shown that selective dissociation within the electronic ground state of HOD can be performed by either maximizing a selected coordinate's differential momentum change or the energy absorption. Concerning the population transfer into excited electronic states, a direct comparison with common control algorithms as optimal control theory and genetic algorithms was accomplished using a one-dimensional representation of methyl iodide. The fields derived from the various control theories were effective in transferring population into the chosen target state but the underlying physical background of the derived optimal fields was not obvious to explain. The instantaneous dynamics algorithm allowed to establish a direct relation between the derived fields and the underlying molecular dynamics. Bound-to-bound transitions could be handled more effectively. This was demonstrated on the sodium dimer in a representation of 3 electronic states being initially in its vibronic ground state. The objective was to transfer population into a predefined excited state. Choosing the first or the second state as a target, the control fields exhibited quite different features. The pulse-structure is related to the excited state wave packet, moving in, and out of the Franck-Condon region. Changing the control objective, the derived control field performed pure electronic transitions on a fast time-scale via a two-step transition. Futhermore, orientational effects have been investigated. The overall-efficiency of the population transfer for differently oriented molecules was about 70 % or more if applying a control field derived for a 45° orientation. Spectroscopic methods to gain information about the outcome of the control process have been investigated. It was shown that pump/probe femtosecond ionization spectroscopy is suited to monitor time-dependent molecular probability distributions. In particular, time-dependent photoelectron spectra are able to monitor the population in the various electronic states. In the last chapter a different possibility of controlling molecules was regarded by investigating molecular iodine with a setup similar to the STIRAP (“Stimulated Raman Adiabatic passage”) scenario. The possibility to extend this technique to a fs-time scale was examined in theory as well as in experiments, the latter being performed by Dr. Torsten Siebert in the Kiefer group, University of Würzburg. It was shown that off-resonant excitation with implementation of the pulses with a higher intensity of the Stokes pulse as compared to the pump pulse - describing a so-called f-STIRAP like configuration - was shown to effectively transfer population into excited ground-state vibrational levels. This was theoretically underlined by comparing the numerically exact coupling case with the adiabatic picture. The process was described to run in the vicinity of adibaticity. A new model explaining the process by the system's vector rotating around the dressed state vector will be adopted in future calculations. Altogether, a new promising algorithm to control dynamical processes based on the instantaneous response has been developed. Because the derived control fields have been shown to be very efficient in selectively influencing molecules, it is to be expected that farther reaching applications can be realized in future investigations. N2 - In dieser Arbeit wurde ein neuer Algorithmus zur Bestimmung von Kontrollfeldern aus der instantanen Respons von Systemen auf die Wirkung von Laserfeldern entwickelt. Die damit berechneten Felder ermöglichen es, eine Verbindung zwischen der Störung durch das Laserfeld und der molekularen Dynamik herzustellen. Das Prinzip lässt sich an einem klassischen Oszillator veranschaulichen: Ein sich innerhalb dieses Oszillatorpotenzials bewegendes Teilchen wird durch ein externes Feld beschleunigt, wenn dieses und der Impuls des Teilchens in die gleiche Richtung weisen. Ein Abbremsen des Teilchens wird durch ein Feld erzielt, welches dem Impuls des Teilchens entgegen gerichtet ist. Wenn das Teilchen in dem Oszillator einen Umkehrpunkt erreicht und dort seine Richtung ändert, wird das Vorzeichen des Feldes an die neue Richtung angepasst: Die Frequenz des Feldes befindet sich in Resonanz mit der Oszillatorfreuqenz. Dieses klassische Bild der erzwungenen Schwingung eines Oszillators kann für die Kontrolle quantenmechanischer Wellenpaketbewegungen angewendet werden. Die Effizienz des Algorithmus' wurde an verschiedenen Problemen, wie dem Populationstransfer (PT) in Doppelminimum-Potenzialen, Anregung und Dissoziation selektiver Moden und den PT in unterschiedliche el. Zuständen aufgezeigt. Obwohl keine Optimierung der Felder bezüglich höherer Ausbeuten durchgeführt wurde, konnte eine hohe Effizienz der Prozesse nachgewiesen werden. Ein PT in Doppelminimum-Potentialen wurde nahezu vollständig erreicht. Selektive Dissoziation innerhalb des el. Grundzustandes des HOD-Moleküls wurde unter Verwendung zweier unterschiedlicher Methoden, der Maximierung der zeitlichen Änderung des Impulses oder der Energieabsorption einer Koordinate, erzielt. Bezüglich des PT in el. angeregte Zustände wurden bekannte Kontrollalgorithmen wie die Theorie der optimalen Kontrolle und genetischer Algorithmen mit dem in dieser Arbeit entwickelten Prinzip der instantanen Respons anhand einer 1D Darstellung des Methyliodids verglichen. Die aus den verschiedenen Theorien konstruierten Felder erzielten einen effektiven PT in den zuvor definierten Zielzustand, jedoch ist der dem zu Grunde liegende, physikalische Hintergrund nicht einfach zu beschreiben. Mit Hilfe des Instantanen-Respons-Algorithmus' konnte eine direkte Relation zwischen den Feldern und der molekularen Dynamik hergestellt werden. Anhand des Na2 in einer Darstellung von 3 elektronischen Zuständen sollte nur ein Zustand selektiv angeregt werden. Je nach Wahl des Zielzustandes zeigten sich deutliche Unterschiede. Selektive Anregung des 1. Zustandes erzeugte ein Feld bestehend aus einer Pulsfolge, die durch ein Wellenpaket im angeregten Zustand, welches sich in und aus dem Franck-Condon Fenster heraus bewegt, erklärt werden konnte. Anregung des 2. Zustandes führte zu einem Feld, welches nicht auf Vibration, sondern rein elektronischer Anregung in einem 2-Stufen-Prozess beruht. Bei der Betrachtung von Orientierungseffekten konnte gezeigt werden, dass PT für alle Orientierungen mit einem Feld, welches aus einer mittleren Orientierung bestimmt wurde, effizient ist. Untersuchungen spektroskopischer Methoden, um Informationen über die Effizienz von Kontrollprozessen zu liefern, zeigten, dass Pump-Probe Ionisationsspektroskopie im Femtosekundenbereich (fs) dazu sehr gut dazu geeignet ist. Im Speziellen konnte mit zeitabh. Photoelektronenspektren die Populationen in den elektronischen Zuständen nach Anlegen des jeweiligen Feldes „beobachtet“ werden. Im letzten Kapitel wurde eine andere Methode der Kontrolle von Molekülen in Anlehnung an einen STIRAP ("Stimulated Raman Adiabatic Passage“) Prozess am Beispiel molekularen Iods vorgestellt. Dabei wurde die Möglichkeit, diese Technik auf die fs-Zeitskala auszudehnen,in Theorie und Experiment untersucht, wobei die Messungen von Dr. Torsten Siebert (Universität Würzburg, Arbeitskreis Prof. Kiefer) durchgeführt worden sind. Nicht-resonante Anregung, mit einer Abfolge der Pulse, in der der Stokes-Puls mit der höheren Intensität im Vergleich zum Pump-Puls in einer f-STIRAP-artigen Anordnung dem Pump-Puls vorausgeht, führte zu einem effizienten PT in einen schwingungsangeregten Zustand im el. Grundzustand. Dies konnte durch einen Vergleich des numerisch exakten Falls mit einer adiabatischen Behandlung theoretisch untermauert werden. Die zu Grunde liegenden Prozesse sind näherungsweise durch adiabatisches Verhalten charakterisiert. Dazu wird gerade ein neues Modell entwickelt, welches den Prozess mit einem um einen dressed-state rotierenden Vektor im Hilbertraum erklärt. Zusammenfassend wurde in dieser Arbeit ein Algorithmus zur Kontrolle von Moleküldynamik entwickelt, der auf der instantanen Antwort eines Systems bei Wechselwirkung mit einem elektrischen Feld beruht. Die daraus berechneten Kontrollfelder sind sehr effizient bezüglich einer selektiven Kontrolle von Molekülen und versprechen noch viele zukünftige Anwendungsmöglichkeiten. KW - Laserstrahlung KW - Molekulardynamik KW - Mehrphotonenprozess KW - Quantenmechanik KW - Quantendynamik KW - Kontrolltheorie KW - STIRAP KW - geformte Laserfelder KW - Multi-Photonen Prozesse KW - quantum dynamics KW - control theory KW - STIRAP KW - pulse shaping KW - multi-photon processes Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-13388 ER - TY - THES A1 - Babocsi, Krisztina T1 - Characterization of II-VI semiconductor nanostructures by low wavenumber raman- and four-wave-mixing spectroscopy T1 - Charakterisierung II-VI Halbleiter Nanostrukturen bei Raman- und Femtosekunden Vier Wellen Mischen Spektroskopie N2 - Es ist bekannt, dass räumlich eingeschränkte Ladungsträger in niederdimensionalen Halbleitern zur Verstärkung optischer und elektronischer Eigenschaften solcher Nanostrukturen beitragen. Die Physik des "Quantum Confinements" ist trotz umfangreicher Nachforschungen noch immer nicht völlig verstanden. Die vorliegende Arbeit beinhaltet eine qualitative Studie quasi-nulldimensionaler II-VI Halbleiter Nanostrukturen. Es wurden handelsübliche und wärmebehandelte CdSxSe1-x Quantenpunkte (QDs) mittels linearer und nicht-linearer Spektroskopie untersucht. Im Rahmen nicht-resonanter Raman Spektroskopie wurden Schlüsseleigenschaften der QDs, wie z.B. der Durchmesser und die Größenverteilung, bestimmt. Die Anordnung der Energieniveaus in einer atom-ähnlichen Struktur hat die Verstärkung der Intensität akustischer Phononen zur Folge, welche im Bulk nicht nachgewiesen werden können. In Nanokristallen sind nur zwei Sorten akustischer Vibrationen Raman-aktiv: Die kugelsymmetrischen (l = 0) und die quadrupolaren (l=2) Vibrationen, die durch linear polarisierte Laserpulse selektiv angeregt werden können. Die Größe der QDs wurde durch Berücksichtigen der Abhängigkeit der Vibrationsfrequenz akustischer Phononen von dem Durchmesser des Nanokristalls berechnet. Die Größenverteilung der QDs ist aus dem normalisierten FWHM ("full width at half maximum") der symmetrischen Vibration bestimmt worden. Die Relaxationsprozesse in Quantenpunkten finden auf einer Pikosekundenskala statt, zu deren Untersuchung ultraschnelle Spektroskopiemethoden mit Laserpulsen im Femtosekundenbereich notwendig sind. Es wurden in einer Glasmatrix eingebettete CdS0.6Se0.4 QDs von 9.1 nm Durchmesser mittels Fs-VWM- und Fs-PPT-Spektroskopie untersucht. In beiden Fällen wurden zirkular polarisierte Fs-Laserpulse eingesetzt. Es ist gezeigt worden, dass die Auswahlregeln für die Polarisation sehr stark von der Symmetrie der Nanokristalle abhängig sind. Es ist gezeigt worden, dass die angeregten Nanokristalle der Symmetriegruppe C2v oder niedriger angehören und der Nachweis einer hexagonalen Struktur der Nanokristalle wurde erbracht. Die Gültigkeit des Vier-Niveau-Modells wurde ebenfalls nachgewiesen. Dieses Modell enthält einen Grundzustand, zwei Exzitonzustände und einen Biexzitonenzustand. Das Entstehen der VWM- und PPT-Signale in verbotenen Polarisationsgeometrien wurde durch das Auftreten starker Coulomb-Wechselwirkung zwischen Exzitonen, die sich in demselben QD befinden, und durch die niedrige Symmetrie der QDs erklärt. Aufgrund der quadratischen Abhängigkeit der Intensitäten der VWM-Signale von der Intensität der PPT-Signale, konnten die Ergebnisse der VWM-Messungen durch PPT-Untersuchungen geprüft werden. Die Effizienz der Methode der zirkular polarisierten Fs-VWM-Spektroskopie wurde bei der Untersuchung von in einer Glasmatrix eingebetteten wärmebehandelten CdSe Quantenpunkten noch einmal bestätigt. Die Aufmerksamkeit auf Nicht-Phonon-Relaxationsmechanismen des Grund- und angeregten Zustands des Exzitons gerichtet. Außerdem konnte die Abhängigkeit der Kristallasymmetrie von der Nanopartikelgröße und von den Wachstumsbedingungen abgeschätzt werden. Es zeigte sich, dass qualitativ hochwertige Quantenpunkte am effizientesten durch lange Wachstumszeiten bei niedrigen Temperaturen hergestellt werden können. Dabei haben die Nanokristalle genügend Zeit für „Nukleation“ und nehmen eine symmetrischere Form an. Außerdem ist es nachgewiesen worden, dass die Exzitonrelaxation sehr stark von den Coulomb-Wechselwirkungen zwischen den Ladungsträgern abhängt. Die Relaxationsprozesse der Exzitonen werden sowohl durch die Auger Selbstionisation, als auch durch den anschließenden Einfang der Ladungsträger in tiefen Fallen (an der Quantenpunktoberfläche und/oder in der dielektrischen Matrix) deutlich verlangsamt. Dadurch wird die Lebensdauer der Exzitonen deutlich verkürzt und liegt im Pikosekundenbereich. Die Relaxation der Exzitonen von höheren Energieniveaus in den Grundzustand erfolgt auch auf zwei Wegen: Am Anfang des Relaxationsprozesses (t31 ~ 200 fs) ist Auger-Thermalisierung der Ladungsträger für die Relaxation des Elektrons von seinem angeregten 1pe Zustand auf sein niedrigeres 1se Energieniveau verantwortlich. Wärenddessen erfolgt die Relaxation des Lochs sehr schnell über sein dichtes Spektrum von Valenzbandzuständen. Diesem Prozess folgt unmittelbar der Einfang der Ladungsträger in tiefen Fallen, die sich an der Nanokristall-Glasmatrix-Grenzfläche befinden. Diese Fallen sind eine direkte Konsequenz der Asymmetrie des Nanokristalls: je zahlreicher und je tiefer die Fallen, desto höher ist die Asymmetrie des Kristalls. Im Rahmen dieser Arbeit ist eine komplette Charakterisierung der in einer Glas- matrix eingebetteten CdSSe-Quantenpunkte gelungen. Die wichtigsten Eigenschaften, wie z.B. die Größe und die Größenverteilung der Quantenpunkte, sind durch polarisierte Raman-Messungen bestimmt worden. Um ein komplettes Bild über die Nanokristalle zu bekommen, sind weitere nicht-lineare Spektroskopiemethoden eingesetzt worden. Polarisierte VWM Spektroskopie wurde zur Untersuchung verschiedener Quantenpunktensembles erfolgreich eingesetzt und daraus sind wertvolle Informationen über die Symmetrie der Nanokristalle gewonnen worden. Weiterhin sind die Exzitonrelaxationsmechanismen beschrieben worden, die die Verstärkung der optischen nicht-linearen Eigenschaften und starke Coulomb-Wechselwirkungen zwischen Exzitonen erklären. Durch die Untersuchung der Auswirkung verschiedener Wachstumsbedingungen auf die Symmetrie der QDs stellt diese Arbeit einen ergänzenden Beitrag zu Herstellungsverfahren qualitativ hochwertiger Quantenpunkte dar. N2 - The enhancement of electronic and optical properties of semiconductor nanostructures is known as a direct consequence of the spatial confinement of carriers. However, the physics of quantum confinement is still not entirely understood. This work focuses on a qualitative study of quasi-zero dimensional II-VI semiconductor nanostructures (quantum dots QDs). In particular, commercially available as-received and heat treated CdSxSe1-x QDs embedded in a dielectric matrix were investigated by means of linear and nonlinear spectroscopy techniques. Low wavenumber Raman in off-resonance scattering regime was applied in order to obtain key-properties of the nanocrystals, such as the QD's size and the distribution of the QD's size inside the inhomogeneous broadening. Moreover, by careful selection of the polarization geometries, different acoustic vibrational modes could be evidenced. In comparison to the bulk, 3D confinement of carriers leads to modifications in the energy distribution in a QD and as a consequence, the intensity of the acoustical phonons is enhanced. However, only 2 acoustic vibrational modes (labelled l=0 and l=2) are Raman-active, which were selectively excited using linear polarized laser light in parallel- and cross-polarized excitation geometries. The QD's size was determined using the dependence of the frequency of the acoustic vibrational mode on the diameter of the vibrating particle, whereas the QD's size distribution was estimated from the normalized full width at the half of the maximum (FWHM) of the symmetric acoustic vibrational mode. In order to study relaxation mechanisms, which in quantum confined systems occur on a ps time scale, ultrafast spectroscopy techniques using laser pulses in the fs range must be employed. To this purpose, fs-FWM and fs-PPT measurements were performed on CdS0.6Se0.4 QDs of 9.1 nm in diameter, embedded in a glass matrix. The laser pulses employed in these experiments were circularly polarized, careful selection of the polarization geometries making different nonlinear processes available to study. It was shown that the relaxation of polarization selection rules depend strongly on the symmetry of the nanocrystals under discussion. The investigated nanocrystals belong to the symmetry group C2v or lower and their hexagonal crystal shape could be evidenced. The relaxation of selection rules was explained in the framework of the 4-level system, including a ground state, two exciton states and a biexcitons state. The appearance of FWM and PPT signals in forbidden polarization geometries was shown to be due to exciton state splitting due to lowering of the QD’s symmetry and due to the strong Coulomb interaction between carriers belonging to the same nanocrystal. Moreover, the significant difference in the origin of the gratings created by two pulses having the same and opposite polarizations, respectively. The intensity of the FWM signals should be the square of the intensity of the PPT signals and therefore the PPT measurements were employed as a check method for the results yielded by the FWM technique. The efficiency of circularly polarized femtosecond FWM spectroscopy techniques was proved once more in the investigation of heat treated CdSe QDs embedded in a dielectric matrix. The role of non-phonon energy relaxation mechanisms in the exciton ground and excited state of the QDs ensemble was extensively studied. Moreover, the dependence of the crystal shape asymmetry on the particle size and on the growth conditions could be estimated. It was shown, that the most efficient procedure to grow high quality nanocrystals is a longer heat treating at lower temperatures. In this case, the particles have more time to "nucleate" and to adopt a more "symmetric" shape. Further, the relaxation of excitons was extensively investigated. It was shown, that the electron intraband dynamics depend strongly on the Coulomb interaction between electrons and holes. Even at low excitation density, the Auger processes cannot be ignored. Auger autoionization of excitons followed by capture of carriers in surface states and deep traps in the dielectric matrix slow down the exciton relaxation process leading to an exciton lifetime ranging on a ps time scale. The relaxation of excitons from higher lying energy levels occurs also on two paths. At the beginning of the relaxation process (t31 < 400 fs), Auger-like thermalization of carriers is responsible for relaxation of the electron from 1pe into its 1se state, while the hole relaxes rapidly through its dense spectrum of states in the valence band. This process is immediately followed by capturing of carriers in deep traps, situated at the semiconductor-dielectric heterointerface. The traps are a consequence of the QD's asymmetry: the more and the deeper the traps, the higher the asymmetry of the nanocrystals (the band offset  is larger). This work presents a complete characterization of CdSSe QDs embedded in a glass matrix. The most important properties of the nanocrystals like QD's size and size distribution inside the inhomogeneous broadening were determined by means of low wavenumber Raman spectroscopy. In order to draw a full picture of these nanoparticles further complementary nonlinear spectroscopy techniques were used. Invaluable conclusions were available as a result of TI-FWM techniques applied in the framework of transient grating on 3D confined nanocrystals embedded in a glass matrix. The polarized the TI-FWM measurements were successfully performed on different QDs ensembles in order to determine symmetry properties and to describe the ultrafast relaxation mechanisms. This work brings additional contribution concerning the preparation of high quality QDs by presenting the effect of different growth conditions on the QDs symmetry, thus indicating a way for efficient manufacturing of nanocrystals. KW - Zwei-Sechs-Halbleiter KW - Raman-Spektroskopie KW - Femtosekundenspektroskopie KW - Vierwellenmischung KW - niederdimensionale Halbleiter KW - Raman Spektroskopie KW - vier Wellen Mischen Spektroskopie KW - Symmetrie der Quantenpunkte KW - semiconductor nanostructures KW - polarized low wavenumber Raman spectroscopy KW - four wave mixing spectroscopy KW - QD's symmetry Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-12551 ER - TY - THES A1 - Grimm, Michael T1 - Aufladungsexperimente an gespeicherten Nanopartikeln mit Synchrotronstrahlung T1 - Charging experiments on trapped nano-particles using synchrotron radiation N2 - Gegenstand dieser Arbeit ist die Untersuchung von gespeicherten Nanopartikeln mit weicher Röntgenstrahlung. Dafür wurde eine neue Apparatur aufgebaut. In dieser befindet sich ein dreidimensionaler elektrodynamischer Quadrupolspeicher, mit dem die positiv geladenen Nanopartikel berührungsfrei und ortsfest gespeichert werden. Mit Hilfe eines Streulichtnachweises werden die Eigenbewegungen der Partikel gemessen und daraus das Ladungs- zu Masseverhältnis ermittelt. Durch gezielte Umladung können die absolute Ladung und die Masse der Partikel mit hoher Genauigkeit bestimmt werden. Die gespeicherten Partikel wurden mit Synchrotronstrahlung am Elektronenspeicherring BESSY II untersucht. Bei niedrig geladenen Partikeln wurden Aufladungsexperimente mit variabler Photonenenergie durchgeführt. Dabei kann die Emission von einzelnen Elektronen beobachtet werden. Die totale Sekundärelektronenausbeute wurde für verschiedene Photonenenergien ermittelt. Sie gleicht den Werten, die durch Messungen mit Elektronenbeschuss bekannt sind. Die Partikel wurden weiterhin bis zum maximal erreichbaren Ladungszustand aufgeladen. Dieser Gleichgewichtszustand liegt unterhalb der theoretischen Erwartungen. Bei den hochgeladenen Partikeln wurden nach Abschalten der Synchrotronstrahlung Entladevorgänge beobachtet, die für das verminderte Ladungsgleichgewicht verantwortlich sind. Die Entladung wird als Ionen-Feldemission interpretiert, möglicherweise hervorgerufen durch den elektrischen Durchschlag im Teilchenmaterial. Das Aufladungsverhalten der Partikel bei verschiedenen Ladungszuständen wurde mit Hilfe von Messungen an der O 1s-Kante untersucht. Bei niedrigen Ladungszuständen liefert der Ladestrom die bekannten Röntgenabsorbtionsstrukturen von Siliziumdioxid. Stark geladene Partikel werden dagegen vor allem im Bereich der resonanten O 1s-Anregung durch schnelle Augerelektronen aufgeladen, während Photoelektronen aus dem O 1s-Kontinuum nicht mehr zur Aufladung beitragen. Deren kinetische Energie ist zu gering, um dem Coulombfeld des Partikels zu entkommen. N2 - Subject of this thesis is the investigation of single trapped nanoparticles using soft X-rays. For this purpose a new apparatus has been developed and characterized. The heart of this apparatus is a three-dimensional electrodynamic quadrupole trap that allows us to store charged nanoparticles well located and without any contact to a substrate. The detection of scattered light, which is modulated by the secular motion frequencies of the stored particle, is used to derive the charge-to-mass ratio. The determination of changes in the charge state due to electron emission is used to determine the absolute charge and mass with high accuracy. The particles were studied using synchrotron radiation at the electron storage ring BESSY II. A set of charging experiments were performed, where particles at low charge state were irradiated with different photon energies in the soft X-ray regime. In these experiments the emission of single electrons is observed. The total secondary-electron emission yield is determined at several photon energies. The values are comparable to the secondary emission after electron impact. Other experiments were performed at highest achievable charge state of the particles. This equilibrium state was found to be far below theoretical predictions. For highly charged particles we found a discharge current after the illumination with synchrotron radiation is terminated. This current is responsible for the low equilibrium charge state. The discharge is assumed to result from ion field emission potentially due to the electric breakdown in the particle material. Charging curves at different charges states of the particle in the regime of the oxygen 1s-edge were recorded. At low charge states the characteristic X-ray absorption fine structure of silicon dioxide is observed. Highly charged particles are efficiently charged by resonant Auger processes in the regime of the resonant O 1s-excitation, whereas there is no charging in the regime of the O 1s-continuum. Evidently, the kinetic energy of these electrons is too small to escape from the attractive Coulomb field of the particle. KW - Nanopartikel KW - Aufladung KW - Synchrotronstrahlung KW - Aufladung KW - Entladung KW - Falle KW - Nanopartikel KW - Synchrotronstrahlung KW - charging KW - discharge KW - trap KW - nano-particle KW - synchrotron radiation Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-13188 ER - TY - THES A1 - Peica, Niculina T1 - Vibrational spectroscopy and density functional theory calculations on biological molecules T1 - Schwingungsspektroskopie und Dichtefunktionaltheorie-Berechnungen an biologischen Molekülen N2 - Infrared (IR) and Raman spectroscopy are among the most widely used techniques in the physical and natural sciences today. Vibrational spectroscopy, including IR and Raman spectroscopy, has both a long and interesting history and an illustrious record of contributions to science. Spectroscopy in the pharmaceutical industry is dominated by techniques such as nuclear magnetic resonance (NMR) and mass spectrometry (MS) for the elucidation of chemical structures. Despite this, the versatility of infrared spectroscopy ensures it still remains a key technique in quality control laboratories, and in applications where solid form characterization or minimal sample preparation is a necessity. Raman spectroscopy has many uses in the pharmaceutical and chemical industry, but its strengths is in solid form analysis. It is regularly used to identify compounds, and results are used in the release of pharmaceutical and chemical products. This work consists of 8 chapters, which cover the vibrational spectroscopy beginning with the theory and instrumentation, continuing with the experimental setup and probes description, and completing with results and discussions of the experiments. The first chapter of this work introduces Raman spectroscopy as a dominant technique used in pharmaceutical and chemical industry. The theoretical background regarding vibrational spectroscopy (IR and Raman) is accounted for in the second chapter of this work, while the samples presentation, the experimental procedures, and the description of the apparatus together with the computational details are briefly specified in the third chapter. The fourth chapter investigates the concentration dependent wavenumber shifts and linewidth changes of tetrahydrofuran in a binary system. Many of the applications in food science rely heavily on Raman spectroscopy, often preceding the biomedical applications. The characterization and identification of food additives using Raman, surface-enhanced Raman spectroscopy, and theoretical calculations is in detail depicted in the fifth chapter, whereas in the sixth and seventh chapters the monitoring of several medicines and various lanthanide complexes with anticancer properties, respectively, employing IR and Raman techniques are treated. These last two chapters address applications of vibrational spectroscopy to pharmaceutical products, and include the use of vibrational spectroscopy in combinatorial chemistry and density functional theory, a modality increasingly used by the pharmaceutical industry for the discovery if new pharmacologically active substances. N2 - In der vorliegenden Arbeit wurden Schwingungsspektroskopie und exakte Dichtefunktionaltheorie-Berechnungen (DFT, density functional theory) für Untersuchungen an einigen bekannten Klassen von Lebensmittelzusatzstoffen (Farbstoffe, Konservierungsmittel und Geschmacksverstärker), Medikamenten (entzündungshemmende Arzneimittel, Anti-Malaria-Arzneimittel) und drei verschiedenen Lanthanidkomplextypen einiger pharmazeutisch-aktiver Substanzen verwendet. Ein kurzer Teil der aktuellen Arbeit, nämlich Kapitel IV, befasst sich mit Schwingungsdephasierung der C-O und C-C Streckschwingungsmoden an dem Wasserstoffbrücken-gebunden binären System von THF und Wasser (C4H8O···HOH). Infrarot- und Raman-Schwingungsspektroskopie wurden zur Charakterisierung der Molekülstruktur im Grundzustand angewandt. Außerdem enthalten Resonanz-Raman (RR)-Spektren zusätzliche Informationen über die Molekülstruktur der resonant angeregten Zustände. Oberflächen-verstärkte Raman-Streuung (SERS) erlaubt es, die Wechselwirkungs- und die Adsorptionsstelle der aktiven Wirkstoffe an Metalloberflächen zu bestimmen. Des Weiteren wurden Dichtefunktionaltheorie- (DFT) Rechnungen zur exakten Modenzuordnung in den Schwingungsspektren durchgeführt. Die DFT-berechneten Molekülgeometrien der interessierenden Spezies stimmten sehr gut mit den Kristallstrukturdaten überein und waren zusammen mit Infrarot- und Raman-Messungen hilfreich bei der Aufklärung derjenigen Substanzstrukturen, für welche keine experimentellen Daten verfügbar waren, und dies besonders für die neuen Lanthaniden-Komplexen. Das erste Kapitel gibt eine Einführung zum Themengebiet der Arbeit. Die Beziehung der verschiedenen Projekte zu aktuellen Entwicklungen in der Forschung wird in den entsprechenden Kapiteln hergestellt. Das zweite Kapitel konzentriert sich auf die theoretischen Hintergründe der Schwingungsspektroskopie und der DFT-Rechnungen. Im dritten Kapitel werden die untersuchten Proben vorgestellt, sowie die eingesetzten experimentellen Arbeitsmethoden (Herstellung der Lösungen und der Substrate und Synthesen), die Beschreibung der Geräte und Einzelheiten zu den DFT-Rechnungen. Im vierten Kapitel wird auf die Untersuchung der Schwingungsrelaxation eingegangen, z.B. in Form der Schwingungsdephasierung, welche als nützliches Hilfsmittel zur Erforschung dynamischer Prozesse in der flüssigen Phase eingesetzt werden kann. Das Kapitel V stellt, nach einer kurzen Übersicht über die Anwendung und die Klassifizierung der Lebensmittelzusatzstoffe, eine detaillierte Untersuchung für die Charakterisierung und die Identifizierung von fünf weit verbreiteten Lebensmittelzusatzstoffen (E102, E211, E127, E132 und E621) durch Kombination von Schwingungsspektroskopie mit Dichtefunktionaltheorie-Rechnungen vor. Im sechsten Kapitel werden Messungen an entzündungshemmenden und anti-Malaria-aktiven Arzneimitteln vorgestellt. Die Raman-Spektren von verschiedenen Aspirin-Tabletten können für die Differenzierung der gepufferten und ungepufferten pharmazeutischen Spezies verwendet werden. Es wurde festgestellt, dass diese zwei Spezies des Aspirin leicht unterschiedlich an der Silberoberfläche chemisorbiert sind. Die durch die Kombination beider Methoden gewonnenen vielversprechenden Ergebnisse zu den neuen, potentiell biologisch aktiven Lanthaniden-Komplexen pharmazeutisch aktiver Substanzen (Kapitel VII) überzeugten uns von der Leistungsfähigkeit der Dichtefunktionaltheorie-Rechnungen als Hilfsmittel bei der Auswertung von IR- und Raman-Spektren um verschiedene interessante Problemstellungen zu lösen. Deswegen wurden die IR- und Raman-Spektren neuer potentiell biologisch aktiver Lanthaniden-Komplexe, die von unseren Kooperationspartnern synthetisiert wurden, mit Hilfe exakter Ergebnisse aus DFT-Rechnungen (Strukturparameter, harmonische Schwingungswellenzahlen, Raman-Streuaktivitäten) besprochen, und viele vorher unvollständige Zuordnungen wurden analysiert und verbessert. Die Experimente und Ergebnisse, die in dieser Arbeit präsentiert wurden, demonstrieren, dass die Schwingungsspektroskopie in Verbindung mit quantenchemischen Rechnungen für die Untersuchung molekularer Strukturen ausgezeichnet geeignet ist. Insbesonders hat sich die Rezonanz-Raman-Spektroskopie als eine nützliche Methode zum Erhalt von Informationen über die anfängliche Dynamik und die Struktur des angeregten Zustandes der photochemisch-aktiven Systeme erwiesen. KW - Schwingungsspektroskopie KW - Dichtefunktionalformalismus KW - Zusatzstoff KW - Raman KW - SERS KW - DFT-Berechnungen KW - Lebensmittelzusatzstoffe KW - Lanthanidkomplexe KW - Raman KW - SERS KW - DFT calculations KW - food additives KW - lanthanide complexes Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-20913 ER - TY - THES A1 - Dembski, Sofia Viktorovna T1 - Synthese und Charakterisierung von II-VI-Halbleiter-Nanopartikeln in unterschiedlicher Umgebung T1 - Synthesis and Characterization of II-VI-Semiconductor Nanoparticles in Selected Environment N2 - Gegenstand dieser Arbeit ist die Synthese und Charakterisierung von II-VI-Halbleiter-Nanopartikeln (NP) in unterschiedlicher Umgebung. Aufgrund des großen Oberfläche-zu-Volumen-Verhältnisses werden Partikeleigenschaften stark durch ihre Oberfläche und die Wechselwirkung mit der Umgebung beeinflusst. Zuerst wurden strukturierte CdSe und CdSe/ZnS-Kern-Schale Nanopartikel durch eine organometallische Synthese in koordinierenden Lösungsmitteln hergestellt. Die optischen und elektronischen Eigenschaften wurden mittels Absorptions-(UV/VIS)-, Fluoreszenz- und konfokaler Fluoreszenz-Korrelations-Spektroskopie (FCS) untersucht. Die Ermittlung der Kristallstruktur erfolgte durch hochauflösende Transmissionselektronenmikroskopie (HRTEM) und Röntgenpulverdiffraktometrie (XRD). Die experimentellen XRD Resultate wurden durch Simulationen mittels der Debye-Formel sowie Berechnung einer Paarverteilungsfunktion (PDF) für die verschiedenen Nanopartikel-Modelle ausgewertet. Somit konnten die Partikelgröße, -form und die Kristallstruktur ermittelt werden. Ramanspektroskopische Untersuchungen ergaben Informationen über die Zusammensetzung des anorganischen Partikelkerns sowie seiner stabilisierenden Ligandenhülle. Aufbauend auf diesen Ergebnissen aus unterschiedlichen spektroskopischen und mikroskopischen Methoden konnte ein Struktur-Modell für die Kern-Schale Nanopartikel entwickelt werden. Dabei ist ein prolater wurtzitischer CdSe-Kern mit einer segmentartigen, lückenhaften ZnS-Schale beschichtet, die eine Zinkblende-Struktur aufweist. Zur Untersuchung der Umgebungseffekte wurden die CdSe- und CdSe/ZnS-Halbleiter-NP mit hydrophilen Liganden funktionalisiert, reversibel mit einer Polymerhülle beschichtet sowie kontrolliert in Silica-Kolloide eingebettet (Multikernpartikel). Somit konnten die Nanopartikel in unterschiedlich polaren und apolaren Lösungsmitteln stabilisiert und charakterisiert werden. Im Hinblick auf die Anwendungen von Halbleiter-NP als Marker in den Lebenswissenschaften wurde die Biokompatibilität und die lichtinduzierte Fluoreszenzverstärkung von Polymer-beschichteten II-VI-Halbleiter-NP und CdSe/ZnS-dotierten Silica-Kolloiden in unterschiedlichen Umgebungen untersucht. Mit Hilfe der erhaltenen Resultate ist ein neues qualitatives Modell für die lichtinduzierten Aktivierungs- und Desaktivierungsprozesse in Multikernpartikeln entwickelt worden. Ein weiterer Aspekt dieser Arbeit war die Untersuchung der lokalen elektronischen Struktur von II-VI-Halbleiter-NP in unterschiedlichen Umgebungen durch elementspezifische Anregung mit weicher Röntgenstrahlung. Dazu wurde ein Verfahren weiterentwickelt, das es erlaubt, einzelne gespeicherte feste und flüssige Nanopartikel substratfrei mit Hilfe von Synchrotronstrahlung zu analysieren. Darüber hinaus wurde die Röntgenabsorptionsfeinstruktur von deponierten CdSe/ZnS-dotierten Silica-Kolloiden durch die Messung der röntgenangeregten optischen Fluoreszenz (XEOL) bzw. durch die Bestimmung der totalen Elektronenausbeute (TEY) untersucht. N2 - Subject of this thesis is the synthesis and characterization of II-VI-semiconductor nanoparticles (quantum dots, QD) in selected environments. Structured CdSe and CdSe/ZnS core-shell nanoparticles have been prepared by syntheses that are based on the high temperature thermolysis of organometallic precursors in the presence of stabilizing agents. The influence of the local environment on the optical properties of the QD is studied by optical absorption (UV/VIS), photoluminescence, and confocal fluorescence correlation spectroscopy (FCS). The crystal structure of the nanoparticles is characterized by high-resolution electron microscopy (HRTEM) and X-ray diffraction (XRD). The diffraction patterns are fitted directly by modeling the nanocrystals using the Debye equation and pair distribution function (PDF), which models the interatomic distances within the sample. These results allowed us to determine fundamental parameters, such as size, shape, and crystal structure. Raman spectroscopy probes the lattice vibrations of the nanocrystals. This approach is applied to investigate the composition of the core-shell particles and especially to study the bonding between the stabilizing ligands and the nanoparticle surface by analyzing the internal vibrational modes. The results of the several characterization methods allowed us to develop a new model for the core-shell particle structure: ZnS with a zincblende structure forms an irregularly shaped shell around the elongated CdSe core which has a wurtzite structure. Further, the particles are subsequently functionalized either by an exchange of their ligands, or by the reversible adsorption of an amphiphilic polymer. Alternatively, they are embedded in silica colloids in a controlled way (multicore particles). As a result, the nanoparticle properties can be studied in various solvents ranging from apolar to polar liquids as well as in solid environments. Moreover, multicore particles have the potential to be used as selective labels for biological studies. Therefore, the cytotoxicity and the light induced enhancement of the luminescence of the multicore particles in various environments are investigated. Based on the present results, a new qualitative model for the mechanism of the photoactivation and -deactivation of CdSe/ZnS dotted silica colloids in various solvents is developed. The local electronic structure of the QD is studied by element-specific excitation using soft X-rays. For this purpose, a recently developed approach has been improved, allowing the investigation of single solid and liquid particles trapped in an electrodynamic particle trap, which are probed by monochromatic synchrotron radiation. In addition, the near edge X-ray absorption fine structure of deposited CdSe/ZnS doped silica colloids is determined by the measurement of the X-ray excited optical luminescence (XEOL) and the total electron yield (TEY). KW - Zwei-Sechs-Halbleiter KW - Nanopartikel KW - II-VI-Halbleiter-Nanopartikel KW - Umgebungseffekte KW - Oberflächenmodifizierung KW - Multikernpartikel KW - Fluoreszenzverstärkung KW - Röntgenabsorptionsfeinstruktur KW - II-VI-semiconductor nanoparticles KW - quantum dots KW - environmental effects KW - surface modifications KW - multicore particles KW - photoactivation KW - NEXAFS Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-22066 ER - TY - THES A1 - Noller, Bastian T1 - Excited-State Dynamics of Organic Intermediates T1 - Dynamik Angeregter Zustände von Organischen Intermediaten N2 - This thesis gives insights into the real-time dynamics of several free carbenes and radicals on a femtosecond and nanosecond time scale. The experiments were performed with radicals, singlet carbenes and triplet carbenes of various sizes. Several neutral excited states as well as the ionic ground state were characterized. Despite the relevance of such reactive intermediates in almost all chemical reactions, only relatively little experimental information on such systems is found in the literature. This is linked to the experimental challenge of producing such species under isolated conditions. The intermediates are formed from precursor molecules under interaction- free conditions by supersonic jet flash pyrolysis. The precursor molecules were synthetically designed to show clean thermal dissociation into one specific intermediate. A large variety of spectroscopic techniques was applied to study the intermediates. Each method augments the results of the other methods. This enabled to successfully approach the main goal of this thesis: to understand the excited-state dynamics of organic intermediates. The excited states were found to deactivate rapidly to the hot ground state. The observed fast decay is presumably linked to coupled electronically excited states and relaxation takes place by internal conversion or conical intersections. Further reactions then take place on the ground state surface. Absorption spectra, photodissociation dynamics, photoelectron spectra, ionization potentials, excited-state lifetimes and dissociative photoionization were elucidated by the measurements. Pulsed and continuous light sources were used over a large spectral range (UV, Vis, VUV). A well-defined amount of energy was deposited into the molecule. After internal conversion has taken place, a microcanonical ensemble of reactive intermediates can be studied. This data helps to understand the energetics and reaction channels of intermediates. Velocity map imaging enabled to monitor the pyrolysis efficiency in real time by analyzing photoion images. This observation facilitates clean intermediate generation. Experimental results were compared to quantum chemical calculations to aid the interpretation as well as to test the performance of theoretical approaches. Hydrocarbon radicals and carbenes are regarded as benchmark systems for computational methods due to their several low-lying electronic states and open-shell electronic configuration. The experimental data can help to identify and understand the contributions of the examined intermediates to the chemistry of high energy environments (e. g., hydrocarbon cracking reactors, interstellar space and combustion chambers). Here increased numbers of hydrocarbon intermediates are often present and usually have a strong impact on the overall reaction mechanism. Such environments contain in general a complex mixture of several different intermediates. The more spectroscopic and dynamic properties of each isolated intermediate are known, the easier it is to identify it among multiple components and to understand how it contributes to the overall reaction mechanism. Electronic excitation can take place by radiation, particle collisions or thermally at very high temperatures. How excited states influence the reaction mechanisms is still a matter of currant research. N2 - Diese Arbeit gibt Einblicke in die Dynamik angeregter Zustände von mehreren isolierten Carbenen und Radikalen. Experimente wurden an verschieden großen Radikalen, singlet Carbenen und triplet Carbenen durchgeführt. Angeregte elektronische Zustände, Grundzustände von Radikal-Kationen und die Photodissoziations-Dynamik des Grundzustandes wurden charakterisiert. Obwohl beinahe alle chemischen Reaktionen über reaktive Intermediate ablaufen, ihnen Schlüsselrollen bei Verbrennungsprozessen zugesprochen werden und sie in hohen Konzentrationen in interstellaren Medien vorkommen, sind viele dieser Spezies unzureichend charakterisiert. Dies liegt hauptsächlich am hohen experimentellen Aufwand, der zur sauberen Herstellung und Untersuchung von Intermediaten nötig ist. Die Intermediate in dieser Arbeit wurden mittels Supersonic-Jet- Flash-Pyrolysis generiert. Mit dieser Technik konnten die hoch reaktiven Moleküle konserviert und unter isolierten Bedingungen spektroskopisch untersucht werden. Hierfür wurden spezielle Vorläufermoleküle synthetisch hergestellt und auf ihre saubere thermische Zersetzung hin getestet und optimiert. Die Intermediate wurden mit einer Reihe von spektroskopischen Methoden untersucht, die sich auf eine hervorragende Art und Weise ergänzten. Das Hauptziel der Dissertation konnte somit erfolgreich abgeschlossen werden und das Verhalten angeregten Zustände einiger wichtiger Intermediate verstanden werden. Die Zustände relaxieren auf einer Femtosekunden-Zeitskala zum heißen Grundzustand. Die schnelle Deaktivierung ist allerWahrscheinlichkeit nach auf eine Kopplung der elektronisch angeregten Zustände zurückzuführen. Die Relaxation erfolgt über interne Konversion und konische Durchschneidungen. Photochemische Reaktionen laufen anschließend vom heißen Grundzustand aus ab. Zusätzlich konnten viele Charakteristika der Intermediate untersucht werden: Absorptionsspektren, Photochemie, Photoelektronenspektren, Ionisierungsenergien und dissoziative Photoionisation. Für die Untersuchungen wurde, über einen breiten spektralen Bereich (UV,Vis,VUV), hauptsächlich frequenz- und zeitaufgelöste Laser-Spektroskopie eingesetzt. Nachdem die Moleküle zum Grundzustand relaxiert waren, konnte die Dynamik eines mikrokanonischen Ensembles von reaktiven Intermediaten untersucht werden. Diese Untersuchungen helfen die Energetik und Reaktionskanäle der Intermediate zu verstehen. Zusätzlich wurden Messungen mit Synchrotron- Strahlung und TPEPICO-Spektroskopie durchgeführt; vorwiegend um die IPs der Spezies zu bestimmen wurde diese Technik angewandt. Velocity-Map-Imaging wurde zusammen mit der Radikalquelle erprobt. Ergänzend zu zeitaufgelösten Photoelektronenspektren konnten mit dieser Methode neue Wege zur Optimierung der Radikalerzeugung aufgezeigt werden. Die Effizienz der Pyrolyse konnte anhand der Photoionen-Images in Echtzeit verfolgt werden. Dies vereinfacht die Darstellung reaktiver Intermediate. Die experimentellen Daten wurden mit quantenchemischen Rechnungen verglichen, um die Interpretation zu erleichtern. Des Weiteren weisen Intermediate häufig eine komplexe elektronische Struktur auf und können somit zum evaluieren quantenmechanischer Methoden verwendet werden. Die erarbeiteten experimentellen Daten können helfen die spektroskopisch untersuchten Intermediate in komplexen Reaktionsgemischen zu erkennen und ihre dynamische Rolle darin besser zu verstehen. Je mehr Information über einzelne isolierte Intermediate bekannt ist, desto einfacher können ihre Beiträge differenziert aufgeschlüsselt werden. Eine erhöhte Anzahl von Intermediaten wird vor allem an Orten mit hoher Energiedichte beobachtet (z.B. im interstellaren Raum und in Motoren). Elektronisch angeregte Zustände der Moleküle können hier durch Teilchenstöße, Strahlung oder sogar thermisch bei sehr hohen Temperaturen angeregt werden. Wie elektronisch angeregte Zustände Reaktionsmechanismen beeinflussen können, ist noch Stand aktueller Forschung. KW - Excited-State Dynamics of Organic Intermediates KW - Intermediate KW - Gas-Phase KW - Femtosekunden KW - Spektroskopie KW - electronisch KW - intermediate KW - gas phase KW - femtosecond KW - laser KW - spectroscopy KW - electronic Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-36075 N1 - Cotutelle: Institut für Physikalische Chemie/Universität Würzburg and Laboratoire Francis Perrin/CEA Saclay ER - TY - THES A1 - Koster, Joachim T1 - Polarisations-sensitive Resonanz-CARS- und Resonanz-Raman-Spektroskopie an metallfreien Porphyrinen T1 - Polarization-sensitive resonance CARS and resonance Raman spectroscopy on free-base porphyrins N2 - Es werden in dieser Arbeit Raman-spektroskopische Untersuchungen an metallfreien Porphyrinen in verdünnter Lösung vorgestellt. Dabei werden Laseranregungswellenlängen eingesetzt, die mit elektronischen Resonanzen der Porphyrine zusammenfallen. Die Ausnutzung von Resonanz-Effekten hat zum einen den Vorteil, dass gewisse Raman-Banden, je nach der Symmetrie der zugrunde liegenden Molekülschwingung, eine deutliche Intensitätsverstärkung erfahren können, was den Nachweis auch geringer Probenkonzentrationen ermöglicht. Zum anderen sind anhand der Banden-Parameter Rückschlüsse auf die exakte Molekülsymmetrie möglich. Im Vergleich zu Metalloporphyrinen sind für metallfreie Porphyrine bisher nur wenige Daten aus resonanten Raman-Spektren bekannt. Ein Grund hierfür ist, dass letztere ein höheres Maß an Fluoreszenz zeigen, die die Raman-Signale überlagert. Während bei Laseranregungen im Bereich hochenergetischer elektronischer Absorptionen der Porphyrine (B-Banden-Region) die klassische spontane Raman-Spektroskopie noch angewendet werden kann, ist dies im Bereich niederenergetischer Absorptionen (Q-Banden-Region) meist nicht mehr möglich. Um auch Anregungen in der Q-Banden-Region zu verwirklichen, wird daher in dieser Arbeit von der kohärenten anti-Stokesschen Raman-Streuung (coherent anti-Stokes Raman scattering, CARS) Gebrauch gemacht. Die CARS-Spektroskopie ermöglicht es, das Fluoreszenzproblem zu umgehen, und bietet zudem noch weitere Vorteile, z. B. bezüglich der Unterscheidbarkeit spektral benachbarter Banden sowie bezüglich der Bestimmung symmetrierelevanter Parameter. Raman-Banden-Parameter aus Q-Banden-CARS-Spektren konnten hier für vier metallfreie Porphyrine, die sich im Substitutionsmuster an den beta-Kohlenstoffatomen des Tetrapyrrol-Makrozyklus unterscheiden, erhalten werden. Die CARS-Parameter, in Kombination mit Parametern aus spontanen B-Banden-Raman-Spektren sowie mit quantenchemisch berechneten Schwingungsvektoren, ließen den Schluss zu, dass Symmetrieunterschiede zwischen den Makrozyklen dieser Moleküle zwar gering, aber durchaus feststellbar sind. Desweiteren konnten durch die niederenergetische Anregung für die metallfreien Porphyrine spezifische Resonanzeffekte nachgewiesen werden, die z. T. von den für Metalloporphyrine bekannten Mustern abweichen. N2 - In this thesis, Raman spectroscopic investigations on free-base porphyrins in dilute solution are presented. For this, laser excitation wavelengths are employed, that coincide with electronic resonances of the porphyrins. Exploiting resonance effects provides, on one hand, the advantage, that certain Raman bands, depending on the symmetry of the corresponding molecular vibration, can experience a significant intensity enhancement, which facilitates the detection of even small sample concentrations. On the other hand, through the band parameters conclusions about the exact molecular symmetry are possible. Compared to metalloporphyrins, for free-base porphyrins only few data from resonant Raman spectra are known. One reason for that is, that the latter exhibit a higher amount of fluorescence which overlays the Raman signals. While with laser excitation in the high energy electronic absorption range of porphyrins (B band region) the classical spontaneous Raman spectroscopy is still applicable, it often fails in the low energy absorption range (Q band region). Therefore, to also perform excitations in the Q band region, in this work it is made use of coherent anti-Stokes Raman scattering (CARS). The CARS spectroscopy allows to circumvent the fluorescence problem and offers additional advantages, e. g. concerning the discrimination of spectrally closely spaced bands and concerning the determination of symmetry relevant parameters. Raman band parameters from Q band CARS spectra could be obtained here for four free-base porphyrins, which differ in the substitution pattern at the beta carbon atoms of the tetrapyrrole macrocycle. The CARS parameters, in combination with parameters from spontaneous B band Raman spectra as well as with quantum chemically calculated vibrational vectors, allowed the conclusion, that differences in symmetry between the macrocycles of these molecules are small, but nevertheless detectable. Further, the low energy excitation revealed specific resonance effects for free-base porphyrins, that in part differ from the patterns known for metallo porphyrins. KW - Porphyrine KW - CARS-Spektroskopie KW - Raman-Spektroskopie KW - metallfreie Porphyrine KW - beta-Substitution KW - kohärente anti-Stokessche Raman-Streuung KW - Resonanz-Raman KW - free-base porphyrins KW - beta substitution KW - coherent anti-Stokes Raman scattering KW - resonance Raman Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-20358 ER - TY - THES A1 - Welter, Nele T1 - Untersuchungen von Pigmenten in römischer Wandmalerei und antiken Gläsern T1 - Analyses of pigments in roman wallpainting and ancient glasses N2 - In dieser Arbeit werden Pigmente in verschiedenen archäologischen Materialien mittels Mikro-Raman-Spektroskopie archäometrisch untersucht. Zusätzlich werden Analysen mittels Elektronenstrahl-Mikrosonde und Röntgenpulverdiffraktometrie durchgeführt, um einerseits die Ergebnisse der spektroskopischen Untersuchungen zu stützen und andererseits die Vor- und Nachteile der Mikro-Raman-Spektrokopie gegenüber diesen Methoden aufzuzeigen. Im ersten Teil werden Pigmentanalysen römischer Fresken in den Provinzen Noricum, Raetien und Obergermanien vorgestellt, um daraus Informationen über Umfang und Variationsbreite der Farbpalette antiker Maler abzuleiten sowie Rückschlüsse auf die Herkunft der Rohstoffe und eventuelle Handelsrouten zu ziehen. Die Möglichkeit der zeitlichen Einordnung von Fresken anhand der verwendeten Pigmente wird ebenfalls diskutiert. Im zweiten Teil wird die chemische Zusammensetzung antiker Gläser am Beispiel einer Sammlung von Mosaikgläsern aus dem Martin-von-Wagner-Museum Würzburg und verschiedener bunter Glasperlen aus Sri Lanka und Oman untersucht, um Informationen über die verwendeten Rohmaterialien und die Technologie der antiken Glasproduktion zu gewinnen. Insbesondere wird auf die Pigmente eingegangen, die die Farbigkeit der Gläser verursachen. Anhand der Differenzen in den Glasrezepturen und Pigmenten der Gläser wird eine zeitliche Einordnung erörtert. N2 - In this dissertation pigments of different kinds of archeological materials are examined archaeometrically by Raman microspectroscopy. Additionally electron microprobe analysis and X-ray powder diffraction are performed, on the one hand to back up the results of Raman microspectroscopy, on the other hand to show the advantages and disadvantages of Raman microspectroscopy in comparison with these methods. In the first part pigment analyses of Roman frescos in the provinces Noricum, Raetia and Germania Superior are presented to deduce information about the amount and variation range of the ancient painters palette as well as to draw conclusions concerning the provenance of the raw materials and the possible routes of trading. The prospects of a periodical classification of paintings on the basis of the pigments used are discussed as well. In the second part of this dissertation the chemical composition of ancient glass is investigated using a collection of mosaic glass from the Martin-von-Wagner Museum in Würzburg and different coloured glass beads from Sri Lanka and Oman to gain information about the raw materials and the technology applied in ancient glass production. Special regard is paid to the pigments causing the glass colour. According to the differences in the glass recipe and the pigments used, a periodical classification is discussed. KW - Wandmalerei KW - Pigmente KW - Mosaikgläser KW - bunte Glasperlen KW - Mikro-Raman-Spektroskopie KW - Elektronenstrahlmikrosonde KW - Röntgenpulverdiffraktometrie KW - Pigments KW - wallpainting KW - ancient coloured glass KW - Raman microspectroscopy KW - microprobe analysis KW - X-ray diffractometry Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28519 ER - TY - THES A1 - Meuer, Petra T1 - Spektroskopische Untersuchungen an Kammerwasser T1 - Spectroscopic Investigation on Aqueous Humor: In Vitro and In Vivo N2 - Ziel dieser Arbeit war es, die Möglichkeiten zur Verwendung des Auges bzw. der Augenvorderkammer als spektroskopische Zelle für nicht-invasive In-vivo-Messungen zu untersuchen. Dabei stand vor allem die Geräte-technische Umsetzung und die Entwicklung geeigneter Auswertestrategien im Vordergrund. In dieser Arbeit konnte gezeigt werden, dass die spektroskopische Untersuchung von Kammerwasser-Substanzen möglich ist. Durch den Einsatz der UV/VIS-Spektroskopie konnte Fluorescein in vivo bestimmt werden. Die Anwendung der NIR-Spektroskopie eignet sich vor allem zur Bestimmung von Glucose im Kammerwasser. Die Güte der Glucose-Bestimmung ist von verschiedenen Faktoren abhängig, wie z. B. dem verwendeten Gerät, den Parameter der Auswertung und der Temperatur. Für weitergehende Studien sollten daher die in dieser Arbeit aufgedeckten Probleme und Strategien beachtet werden. N2 - The aim of this work was to determine the possibilities of using the human eye or more precisely the anterior chamber as spectroscopic cell for non-invasive in vivo measurements. The focus lay on the technical realization and the development of a suitable analysis strategy. This work showed that spectroscopic investigations of substances in the aqueous humor are possible. Fluorescein was determined in vivo by use of UV/VIS spectroscopy. NIR spectroscopy is a suited technique for the non-invasive glucose determination in the anterior chamber. The quality of the glucose determination depends on several factors, e. g. the instrument, the analysis parameters and the temperature. Any further studies on this field should take these factors into account. KW - Blutzucker KW - Nichtinvasive Diagnostik KW - NIR-Spektroskopie KW - Kammerwasser KW - Auge KW - Kammerwasser KW - nicht-invasiv KW - NIR-Spektroskopie KW - UV-Spektroskopie KW - eye KW - aqueous humor KW - non-invasive KW - NIR-spectroscopy KW - UV-spectroscopy Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4974 ER - TY - THES A1 - Tarcea, Nicolae T1 - Light as a universal tool : Microcapsule sizing by elastic light scattering and mineral investigation by in situ Raman spectroscopy T1 - Licht als Universalwerkzeug : Größenbestimmung der Mikrokapseln mittels elastischer Lichtstreuung und Mineral-Untersuchungen mittels In Situ Ramanspektroskopie N2 - The present work consist of two major parts. The first part, extending over chapters 1, 2, 3 and 4, addresses the design and construction of a device capable of determining the shell thickness and the core size for monolayer spherical particles in a flow. The second part containing chapters 5, 6, 7, 8, 9 and 10, concentrate on the use of Raman spectroscopy as a space application, namely for use as a tool for in situ planetary investigations. This part directly addresses the MIRAS project, a study run under the auspices of Federal Ministry of Education and Research, BMBF and German Aerospace Center, DLR under national registration number 50OW0103. MIRAS stands for "Mineral Investigation by in situ Raman Spectroscopy". Microcapsule Sizing by Elastic Light Scattering The industrial development of processes based on microcapsules depends on the possibility to provide clear and complete information about the properties of these microcapsules. However, the tools for an easy and efficient determination of the microcapsule properties are lacking, several methods being often required to describe adequately the microcapsule behavior. Methods for evaluating the individual size and size distribution of both the core and the shell are required together with methods for measuring the mechanical strength, stability in appli-cation media, permeability of the shell, etc. Elastic light scattering measurements provide a possible way of determining properties such as core size, shell size and refractive index. The design and con-struction of a device capable of measuring the above mentioned parameters for a core-shell particle is the subject of the first part of this thesis. The basic principle of measurement for the device proposed here consists of an-alyzing one particle at a time by recording the elastic light scattering pattern at angles between approx. 60 and 120 grad. By comparing the experimentally recorded phase functions with the previously calculated phase functions stored in a database, the geometry of the scattering object can be identified. In our case the geometry is characterized by two parameters: the shell thickness and the core radius. In chapter 2 a short overview on the methods used for sizing microparticles is given. Different sizing methods are compared, and the advantages and disadvan-tages for the general problem of sizing are shortly discussed. It is observed that all sizing methods that are based on elastic light scattering theories are ensemble methods. Chapter 3 focusses on the theories used for calculating the theoretical scattering patterns with emphasize on the Mie theory. The generalization of Mie theory for layered particles is shortly presented and the far field intensity approximations are discussed. The last chapter (4) of this first part describes the experimental approach for building an automatic microcapsule sizer. The approach started by O. Sbanski [76] with the development of a software packet for calculating and storing theoret-ical phase functions for core-shell particles was continued with the designing and construction of a measuring device. The hardware construction and the software with all implemented corrections imposed by the individual setup components are described in detail. For the laser, the monochromaticity, the intensity profile of the beam as well as the planarity of the equi-phase fronts are taken into consid-eration. The flow cell with three different designs is described, and the influences of the employed design on the light scattering patterns are discussed together with the optical system used for recording the experimental phase functions. The detection system formed by two identical linear CCD arrays is presented together with the software approach used for data acquisition. Ways of improving the quality and the speed of the analyzing process are discussed. The final section presents measurements run on samples made of homogeneous spheres and also on samples containing industrial microcapsules. Mineral Investigation by in situ Raman Spectroscopy The envisaged future planetary missions require space-born instruments, which are highly miniaturized with respect to volume and mass and which have low needs of power. A micro Raman spectrometer as a stand alone device on a planetary surface (e.g. Mars) offers a wide spectrum of possibilities. It can assess the chemical analysis via determination of the mineral composition, detect organic molecules in the soil, identify the principal mineral phases, etc. The technical developments in the last years have introduced a new generation of small Raman systems suitable for robotic mineral characterization on planetary surfaces [20, 95]. Two different types of spectrometer were considered for the MIRAS study. As supporting laboratory experiments for the MIRAS study, the measure-ments on standard minerals and on SNC Mars meteorites are discussed in chapter 6. The following SNC meteorites have been investigated: Sayh al Uhaymir 060, Dar al Gani 735, Dar al Gani 476, Northwest Africa 856, Los Angeles, Northwest Africa 1068 and Zagami. Pyrite as a hitherto undescribed phase in the picritic (olivin-phyric) shergottite NWA 1068 as well as reduced carbon (e.g. graphite) and anatase in the shergottite Say al Uhaymir 060 are new findings for this class of meteorites. A detailed description of the proposed designs for MIRAS, with the compo-nents used for building the test version on a breadboard is covered in chapter 7. The scientific as well as the mission requirements imposed on the instrument are discussed. The basic design is presented and the main components that are brought together to build the device being the laser unit, the Raman head, the Rayleigh filtering box, and the spectral sensor (spectrometer with a matching de-tector) are described. The two proposed designs, one based on an acousto-optic tunable filter (AOTF) and the other based on a dispersive hadamard transform spectrometer are compared to each other. The actual breadboard setup with the detailed description of the components follows in Section 7.3. Further de-velopment of a Raman spectrometer for planetary investigations is proposed in combination with a microscope as part of the Extended-MIRAS project. The software developed for controlling the breadboard version of MIRAS is described in chapter 8 together with a short description of the structure of a relational database used for in house spectra management. The measuring pro-cedures and the data processing steps are presented. Spectra acquired with the MIRAS breadboard version based on the AOTF are shown in chapter 9. The final chapter addresses a rather different possibility of using Raman spectroscopy for planetary investigations. The chapter summarizes the content of four tech-nical notes that were established within the study contracted by the European Space Agency with firma Kayser-Threde in Munich concerning the possibility of applying Raman spectroscopy in the field of remote imaging. N2 - Die vorliegende Arbeit besteht aus zwei Hauptteilen. Der erste Teil, der die Kapitel 1, 2, 3 und 4 umfasst, beschäftigt sich mit dem Design und Aufbau eines Gerätes, welches in der Lage sein sollte, die Schalendichte und die Kerngröße von geschichteten Kugeln in einer Strömung festzustellen. Der zweite Teil, der aus den Kapiteln 5, 6, 7, 8, 9 und 10 besteht, befasst sich mit der Raman-Spektroskopie als Anwendung in der Raumfahrt, und zwar mit deren Einsatz bei in-situ-planetarischen Erforschungen. Dieser Teil bezieht sich direkt auf das MIRAS-Projekt, eine vom Bundesministerium für Bildung und Forschung (BMBF) und dem Deutschen Zentrum für Luft- und Raumfahrt (DLR) unter der nationalen Eintragsnummer 500W0103 geförderte Studie. MIRAS steht für "Mineral Investigations by in situ Raman Spectroscopy". Größenbestimmung der Mikrokapseln mittels elastischer Lichtstreuung Der industrielle Fortschritt der auf Mikrokapseln basierenden Prozesse hängt mit der Möglichkeit zusammen, eindeutige und komplette Informationen über die Eigenschaften dieser Mikrokapseln zu liefern. Es gibt allerdings kaum Instrumente zur schnellen und effizienten Feststellung der Eigenschaften von Mikrokapseln. Zahlreiche Methoden sind häufig notwendig, um das Verhalten von Mikrokapseln ausreichend zu beschreiben. Man braucht Methoden zur Auswertung der indi-viduellen Größe und der Größenverteilung von Kern und Schale sowie zur Messung der mechanischen Eigenschaften, Stabilität in Anwendungsmedien, Schalenper-meabilität usw. Die Messungen des elastischen Streulichts stellen eine mögliche Methode dar, Eigenschaften wie Kerngröße, Schalengröße und Brechungsindex festzulegen. Das Design und der Aufbau eines Gerätes, das die obengennanten Parame-ter für eine Mikrokapsel messen kann, bilden das Thema des ersten Teils dieser Arbeit. Das grundlegende Messprinzip für das hier vorgeschlagene Gerät besteht in der Analyse einzelner Kapseln, indem das Streuungsmuster des elastischen Lichts bei Winkeln zwischen ca. 60 und 120 grad aufgezeichnet wird. Werden die expe-rimentell aufgezeichneten Phasenfunktionen mit den vorher berechneten Streu-ungsmustern in der Datenbank verglichen, so kann die Geometrie des Streuung-sobjektes identifiziert werden. In unserem Fall wird die Geometrie durch zwei Parameter gekennzeichnet: die Schalendichte und den Kernradius. In Kapitel 2 wird ein kurzer Überblick über die Methoden zur Festlegung der Größe von Mikrokapseln gegeben. Es werden verschiedene Methoden miteinander verglichen und Vorteile bzw. Nachteile für das Allgemeinproblem der Größenbes-timmung werden kurz angesprochen. Es wird festgestellt, dass alle Methoden, denen die Theorien der elastischen Lichtstreuung zugrundeliegen, "Ensemble-Methoden" sind. Kapitel 3 beschreibt die Theorien, die oft auf die Berechnung der theoretischen Streuungsmuster angewandt werden, wobei hier die Mie-Theorie im Mittelpunkt steht. Die Erweiterung der Mie-Theorie auf geschichtete Kugeln wird hier kurz geschildert und die Vereinfachungen der Fernfeldstärke werden diskutiert. Das letzte Kapitel (4) dieses ersten Teils befasst sich mit dem experimentellen Projekt zum Aufbau eines automatischen Mikrokapselanalysators. Das von O. Sbanski [76] begonnene Projekt mit der Entwicklung eines Softwarepakets zur Berechnung und Speicherung von theoretischen Phasenfunktionen für Mikrokapseln wurde mit dem Entwurf bzw. dem Aufbau eines Messgerätes fortgesetzt. Die Hardware und die Software mit allen für die individuellen Elemente des Aufbaus benötigten Korrekturen werden ausführlich beschrieben. Für den Laser werden Monochromatizität, Strahlstärkeprofil sowie die Planarität von gleichphasigen Wellenfronten berücksichtigt. Die Strömungszelle mit drei verschiedenen Designs wird geschildert. Einflüsse des eingesetzten Entwurfs auf die Eigenschaften der Lichtstreung sowie das optische, zur Aufzeichnung experimenteller Phasenfunktionen verwendete System werden diskutiert. Das aus zwei identischen linearen CCD-Arrays bestehende Detektionssystem wird zusammen mit der zur Datenaufnahme verwendeten Software präsentiert. Es werden gleichfalls einige Methoden zur Verbesserung der Qualität bzw. Geschwindigkeit des Analyseprozesses angesprochen. Der letzte Teil beschreibt Messungen, welche an homogenen Kugeln sowie industriellen Mikrokapseln durchgeführt wurden. MIRAS - "Mineral Investigation by in situ Raman Spectroscopy" Die für die Zukunft vorausgesehenen planetarischen Missionen benötigen Instru-mente, die in Bezug auf Volumen und Gewicht extrem stark miniaturisiert sind und wenig Energie brauchen. Ein Mikro-Ramanspektrometer als allein operieren-des Gerät auf der planetarischen Oberfläche (z.B. Mars) bietet ein breites Spek-trum von Möglichkeiten an. Es kann die chemische Analyse durch Festlegung der mineralischen Zusammensetzung auswerten, organische Moleküle im Boden ausweisen, die mineralischen Hauptphasen identifizieren usw. Die technischen Entwicklungen der letzten Jahre haben eine neue Generation kleiner Raman-systeme mit sich gebracht, welche für die mineralische Charakterisierung von planetarischen Oberflächen geeignet sind. Für die MIRAS-Studie wurden zwei verchiedene Typen von Spektrometern berücksichtigt. In Kapitel 6 werden die Messungen von Standardmineralien und SNC-Marsmeteoriten als unterstützende Laborexperimente behandelt. Folgende SNC-Meteorite sind untersucht worden: Sayh al Uhaymir 060, Dar al Gani 735, Dar al Gani 476, Northwest Africa 856, Los Angeles, Northwest Africa 1068 und Zagami. Pyrit als eine bis jetzt unbeschriebene Phase in dem Picritic (Olivin-Phyric) Shergottit NWA 1068 sowie reduzierter Kohlenstoff (z.B. Graphit) und Anatase in dem Shergottit Say al Uhaymir 060 sind neue Erkenntnisse für diese Meteoritenklasse. Eine detaillierte Beschreibung der vorgeschlagenen Entwürfe für MIRAS mit den Bauteilen, die zum Aufbau der Testversion eines Breadboard verwendet wurden, wird in Kapitel 7 geliefert. Es werden sowohl die wissenschaftlichen als auch die Missionsanforderungen an das Gerät diskutiert. Der Grundentwurf wird vorgeführt, wobei die einzelnen Hauptbauteile des Gerätes die Laserein-heit, den Ramankopf, das Rayleigh-Filtersystem und das Spektrometer (mit einem passenden Detektor) darstellen. Die zwei vorgeschlagenen Entwürfe, der eine basierend auf einem akusto-optisch einstellbaren Filter (AOTF), der andere hingegen auf einem dispersiven Hadamard-Transformationsspektrometer werden miteinander verglichen. Der tatsächliche Breadboard-Aufbau sowie eine detaillierte Beschreibung der Bauteile folgen in Unterkapitel 7.3. Es wird ein weiteres Entwicklungskonzept für ein Raman-Spektrometer in Bezug auf planetarische Untersuchungen, im Zusammenhang mit einem Mikroskop als Teil des erweiterten MIRAS-Projektes, vorgeschlagen. Das für die Kontrolle der MIRAS Breadboard-Version entwickelte Programm samt der Struktur einer zum internen Spektrummanagement verwendeten rela-tionelen Datenbank werden in Kapitel 8 vorgestellt. Die Messprozeduren und die Datenbearbeitungsvorgänge werden zusammen beschrieben. Die mit der auf AOTF basierenden MIRAS Breadboard-Version aufgenommenen Spektren sind in Kapitel 9 abgebildet. Das letzte Kapitel (10) bezieht sich auf eine etwas andere Möglichkeit, Raman-Spektroskopie bei planetarischen Untersuchungen anzuwen-den. Das Kapitel fasst den Inhalt von vier technischen Beobachtungen zusam-men, welche im Rahmen der von der Firma Kayser Threde in München für die European Space Agency ausgeschriebenen Studie aufgezeichnet wurden. Diese Studie befasst sich mit der Möglichkeit, Raman-Spektroskopie auf das Gebiet der Fernaufnahmen anzuwenden. KW - Mikrokapseln KW - Mie Theorie KW - Raman Spektroskopie KW - MIRAS KW - Mars Meteoriten KW - Microcapsules KW - Mie Theory KW - Raman Spectroscopy KW - MIRAS KW - Mars Meteorites Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-9383 ER - TY - THES A1 - Dem, Claudiu Dorin T1 - Design and construction of a device for light scattering studies on airborne particles T1 - Entwurf und Aufbau von ainem Aerosolanalysegerät N2 - This thesis is concerned with the development of an on-line in-situ device for a chemical characterisation of flowing aerosols. The thesis describes the principles and most important features of such a system, allowing also on-line measurements using Raman spectroscopy as a diagnostic technique An analysis of the effect of forced oscillations on the motion of the particle dispersed in a gas flow is given in Chapter 2. Also the most important particle parameters are introduced. A review of the particle/fluid interaction in laminar air flows and the response of the particle is presented. In Chapter 3 the behaviour of the particle under different external conditions (ion bombardment and electric fields) is extended. A brief review of the most important particle charging theories (diffusion, field, and alternating potential charging) shows, that the effect of the electrical properties (represented by the dielectric constant) of the particles affects the charging process. A non-contact method for particle charge measurement was also presented. In the second part of the chapter, the interaction between the electric field and the charged particle for the purpose of particle trapping is illustrated. The most common systems like the two or four ring electrodynamic balance and the quadrupole trap are pointed out. In Chapter 4 a short review of the possibility of using scattered light to study aerosol particles is presented. First, the conditions and the facilities of using the Mie theory for particle size and refractive index determination are mentioned, then some features concerning the classical treatment of the Raman effect are presented Supported by the theoretical considerations exposed in Chapter 2, 3, and 4 the construction and the tests of different devices are presented in Chapter 5. Following the goal of the thesis, first an overview of the used materials and methods for particle generation is presented. Then, the constructed charging devices are described (from the mechanical and electrical point of view) and compared by measuring the acquired charge on the particle. Charged particles can be trapped in different containers. Two types of axially symmetric electrodynamic balances (two ring or an extended four ring configuration) were presented. For a deeper understanding these systems were studied using analytic and numerical methods. Considering the presented purpose of the work another type of trapping system has been developed, namely the quadrupole trap. A similar theoretical characterisation (in term’s of Mathieu equation) as for the electrodynamic balance was presented pointing out some specific features of this system. The incoming particle stream will be focused to the centre of the system simultaneously also the applied DC and AC potential onto the tube electrodes, yields a stable trapping of one or more particles. Chapter 6 consists of two parts: the system for single particle and for many particles investigation. The individual devices presented in Chapter 5 are now put together. The first part presents the method and the experimental realisation of a set-up for solid particle injection. In order to suppress the phase injection disadvantage found for the electrodynamic balance a developed program processes the information obtained from a particle cloud through an adequate electronic detection system, and reduces the number of particles until just one single particle is trapped. The method for one particle investigation can be extended for many particles. Using the presented set-up the particles are moved from one quadrupole to another and transformed from a particle cloud to a particle stream. A linearity between an external vertical mounted detector and the formed image of the particle stream on the CCD camera has been observed and used for simultaneous detection of many particles by Raman spectroscopy. For both methods Raman results are presented. One limitation of Raman Spectroscopy is the relatively long integration time needed for adequate signal-to-noise ratio. There are two factors which influence the integration time: first the incident radiation and the detector sensitivity, and second the intensity of the Raman bands. Using a CCD detector, the desired detector sensitivity should be achieved. So, the improvement of the signal-to-noise ratio should be the next goal in the system development. In order to reduce the integration time an optical system including optic fibres and the integration of an FT-Raman module operating in the visible region is planed. The goal of this work was to develop and construct an instrument for on-line in-situ single particle investigation by Raman spectroscopy. With the presented experimental set-up and the developed program the purpose of the work, the on-line in-situ near atmospheric pressure aerosol investigation was achieved. The Raman spectroscopy has been used successfully for a chemical characterisation of the aerosol particles. N2 - Diese Arbeit beschäftigt sich mit dem Aufbau eines on-line in-situ Analysegerätes zur chemische Charakterisierung von Aerosolen in Luftströmungen. Die Arbeit beschreibt neben den Grundlagen die wichtigsten Eigenschaften eines solchen Systems für on-line Messungen, das die Raman-Spektroskopie als eine Diagnosetechnik einsetzt. Kapitel 2 beinhaltet eine Analyse der Effekte von erzwungenen Oszillationen auf die Bewegung dispergierter Teilchen im Gasfluss. Dort werden auch die wichtigsten Eigenschaften von Partikeln vorgestellt. Es wird ein Überblick über die Teilchen-Gas Wechselwirkungen in laminarer Strömung gegeben, und die Reaktion des Teilchens in Abhängigkeit von Veränderungen (Kräften) wird diskutiert. In Kapitel 3 wird das Verhalten von Teilchen unter verschiedenen externen Bedingungen (Ionenbeschuss oder elektrisches Feld) weiter erörtert. Ein kurzer Überblick über die wichtigsten Theorien zur Teilchenladung (Diffusions-, Feld-, und alternierende Potentialaufladung) zeigt, dass die elektrischen Eigenschaften (dargestellt durch die dielektrische Konstante) des Teilchens den Ladungsprozess beeinflussen. Darüber hinaus wird eine kontaktlose Messmethode für die Ladung der Teilchen diskutiert. Im zweiten Teil des Kapitels wird die Wechselwirkung zwischen dem elektrischen Feld und dem geladenen Teilchen erläutert, zu dem Zweck, dass man die Teilchen ’’einfängt’’. Die gängigen Systeme wie z.B. die elektrodynamische Waage mit zwei oder vier Ringen und die Quadrupolfalle werden ebenfalls diskutiert. In Kapitel 4 werden die Möglichkeiten zur Untersuchung von Teilchen durch um Analyse des gestreuten Lichts vorgestellt. Zunächst werden die Bedingungen und Möglichkeiten für die Eignung der Mie-Theorie zum Studium von Partikelgröße und Brechungskoeffizient diskutiert; des weiteren wird auf die Eigenschaften des klassischen Raman-Effektes eingegangen. In Kapitel 5 wird die Konstruktion und anschließende Erprobung von Geräten beschrieben. Der Aufbau dieser Geräte erfolgte mit Hilfe der theoretischen Erwägungen aus den Kapiteln 2, 3 und 4. Es wird ein Überblick über die verwendeten Materialien und Methoden für die Teilchenerzeugung gegeben. Dann werden die entwickelten Ladegeräte beschrieben (vom mechanischen und elektronischen Standpunkt aus gesehen), und sie werden untereinander verglichen, indem die erzielte Ladung auf den Teilchen gemessen wird. Geladene Teichen können in verschiedenen Anordnungen gefangen werden. Zwei Arten von achsensymmetrischen elektrodynamischen Waagen (Zwei-Ring- oder eine erweiterte Vier-Ring-Konfiguration) werden vorgestellt. Für ein besseres Verständnis wurden diese Systeme durch analytische und numerische Methoden untersucht. In Anbetracht der Ziele dieser Arbeit wurde eine andere Art von Fangsystem entwickelt, die sogenannte Quadrupolfalle. Eine ähnliche theoretische Charakterisierung wie im Falle der elektrodynamischen Waage wurde vorgenommen und verschiedene spezifische Eigenschaften des Systems dargelegt. Der ankommende Teilchenfluss wird in die Mitte des Systems fokussiert, und unter Berücksichtigung des DC-Potentials auf den Rohrelektroden erhält man ein stabiles „Trapping“ eines oder mehrerer Teilchen. Kapitel 6 beschreibt die Experimentalaufbauten für die Untersuchung von einem oder von mehreren Teilchen. Die einzelnen Geräte, die in Kapitel 5 vorgeführt wurden, werden jetzt zusammengesetzt. Der erste Teil des Kapitels stellt die Methode und den experimentellen Aufbau für die Injektion von Feststoffteilchen vor. Um dem Nachteil der Phaseninjektion im Falle der elektrodynamischen Waage entgegenzukommen, wurde ein Programm entwickelt, das die Informationen (aufgenommen durch ein elektronisches Detektionssystem) von einer Teilchenwolke verarbeitet und das die Zahl der Teilchen reduziert, bis nur ein einziges übrig bleibt. Die Methode für die Ein-Teilchen-Untersuchung kann auch für mehrere Teilchen erweitert werden. Unter Verwendung des beschriebenen Systems werden die Teilchen aus einem Quadrupol in einen anderen bewegt und von einer Teilchenwolke in einen Teilchenstrom umgewandelt. Es wurde eine Linearität zwischen einem extern montierten Detektor und der Abbildung des Teilchenflusses durch ein Spektrometer auf einer CCD-Kamera festgestellt, welche für die gleichzeitige Detektion von mehreren Teilchen mittels Raman-Spektroskopie genutzt wurde. Für beide Methoden werden Raman-Ergebnisse gezeigt. Eine Einschränkung bei der Anwendung der Raman-Spektroskopie besteht in den relativ langen Integrationszeiten, die für ein ausreichendes Signal-Rausch-Verhältnis gebraucht werden. Es gibt zwei Faktoren, die die Integrationszeit beeinflussen: (1) die einfallende Strahlung und die Detektorempfindlichkeit und (2) die Frequenz und die Intensität der Raman Banden. Durch Verwendung eines CCD-Detektors kann die gewünschte Detektorsensitivität erreicht werden. Der nächste Schritt in der Systementwicklung ist die Verbesserung des Signal-Rausch-Verhältnisses. Um die Integrationszeit zu verkürzen, ist für zukünftige Arbeiten ein optisches System geplant, das optische Fasern und den Einbau eines FT-Raman-Moduls im sichtbaren Bereich einschließt. Das Ziel dieser Arbeit war die Entwicklung und der Aufbau eines Geräts zur on-line in-situ Untersuchung eines einzelnen Teilchens mit Hilfe der Raman-Spektroskopie. Durch den vorgestellten experimentellen Aufbau und das entwickelte Steuerungsprogramm konnte das Ziel der Arbeit, die in-situ Untersuchung von Aerosolen bei normalem Luftdruck, erreicht werden. Die Raman-Spektroskopie wurde erfolgreich zur chemischen Charakterisierung von Aerosolen eingesetzt. KW - Aerosol KW - Chemische Analyse KW - Raman-Spektroskopie KW - Schwebeteilchen KW - Elektrodynamische Falle KW - Raman Spektroskopie KW - Airborne particles KW - Electrodynamic trap KW - Raman spectroscopy Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-9605 ER - TY - THES A1 - Geßner, Ralph T1 - Untersuchungen an biologischen Proben mit verschiedenen Raman- und SERS-spektroskopischen Techniken T1 - Investigations on biological samples with different Raman- and SERS spectroscopic techniques N2 - Diese Arbeit befasst sich mit der Entwicklung und Erprobung geeigneter Methoden zur Raman-spektroskopischen Untersuchung empfindlicher, insbesondere biologischer Proben. Das Ziel dabei ist, ein Werkzeug zur Verfügung zu stellen, mit dem es möglich ist, detaillierte Informationen über die Inhaltsstoffe einer Probe und deren räumlichen Verteilung zu sammeln. Diese Daten sind beispielsweise für die Qualitätssicherung pharmazeutischer Produktionen notwendig. Zu diesem Zweck wurden zwei verschiedene Ansätze verfolgt: ein Raman-Spektrometer wurde zum einen mit einer Glasfasersonde, zum anderen mit einer optischen Gradientenfalle kombiniert. Beide Ansätze wurden getestet und mit ihnen biologische Fragestellungen bearbeitet. Die Empfindlichkeit biologischer Proben und die geringe Konzentration ihrer Inhaltsstoffe macht es dabei notwendig, besonderen Wert auf probenschonende Messverfahren und eine hohe Nachweisempfindlichkeit zu legen. Die Raman- bzw. SERS-Spektroskopie ist hierzu in der Lage und erfordert gleichzeitig nur eine minimale Probenpräparation. Anhand der präsentierten Experimente konnte gezeigt werden, dass sich die SERS-Glasfasersonde besonders zur Untersuchung empfindlicher Proben eignet. Insbesondere erlaubt sie minimal-invasives Arbeiten an biologischen Materialien. Es konnte außerdem gezeigt werden, dass die Sonde aufgrund ihrer geometrischen Beschaffenheit eine gute Ortsauflösung, bis in den Sub-Mikrometerbereich, bei den Messungen erlaubt. Daher eignet sich die Fasersonde besonders zur Untersuchung von hochempfindlichen biologischen Proben bei gleichzeitig sehr geringem Probenbedarf. Mit der optischen Gradientenfalle, als zweite Methode, hat man ein Werkzeug zur Hand, mit dem es möglich ist, einzelne Mikroorganismen oder Mikropartikel in Suspension zu vermessen. Bei Arbeit mit der optischen Gradientenfalle ist eine freie, dreidimensionale Manipulation der gefangenen Zellen im Probengefäß möglich. Auf diese Weise können einzelne Zellen über längere Zeit stabil im Laserfokus gehalten werden, wodurch längere Integrationszeiten möglich werden. Außerdem kann man auf diese Weise eine Immobilisierung der suspendierten Zellen auf einer funktionalisierten Oberfläche vermeiden, wodurch unerwünschte Effekte auf das zu messende Spektrum, wie z. B. Verschiebungen einzelner Banden oder Änderungen in den relativen Bandenintensitäten, ausgeschlossen werden können. Zur Untersuchung partikulärer Verunreinigungen ist es nicht notwendig, die Lösung aus dem Gefäß heraus zu präparieren. Vielmehr können die Mikropartikel durch die optische Gradientenfalle in der Lösung festgehalten und spektroskopisch identifiziert werden. Dies ermöglicht beispielsweise die Charakterisierung von Verunreinigungen in pharmazeutischen Lösungen, ohne dass dafür Ampullen geöffnet werden müssten. Auf diese Weise können Kontaminantien identifiziert werden, ohne Gefahr zu laufen, bei der Probenpräparation weitere Verunreinigungen zu verursachen und damit die Messungen zu verfälschen. Durch die Kombination eines Raman-mikroskopischen Aufbaus mit der SERS-Glasfasersonde bzw. der optischen Gradientenfalle ist es gelungen, Fragestellungen an biologischen Systemen in sehr Proben-schonender, aber gleichzeitig hoch-ortsauflösender Weise zu bearbeiten. Durch die Verwendung nicht-kontaminierender SERS-Sonden ist es möglich, zusätzliche Verstärkungseffekte zu erzielen. Die verwendeten Anregungslaserleistungen können daher generell niedrig gehalten werden. Dennoch erhält man aussagekräftige Spektren in einer akzeptablen Zeit. Die Zwei-Laser-Lösung für die optische Gradientenfalle stellt ein zuverlässiges Werkzeug zur berührungsfreien Manipulation kleiner Partikel bei gleichzeitiger Flexibilität in Bezug auf die Anregungswellenlänge dar. N2 - This work deals with the development and evaluation of methods suitable for Raman spectroscopic investigations of sensitive samples and especially of biological samples. The aim of this work is to provide an instrument that allows the collection of detailed information on the constituents of a sample and their spatial distribution. These data are necessary e. g. to insure the quality assurance for pharmaceutical productions. For this purpose, two different approaches have been followed. One was the combination of a Raman spectrometer with a glass fiber probe, the other the combination of a Raman spectrometer with an optical gradient trap. Both strategies have been tested and applied to investigate biological problems. The sensitivity of biological samples as well as the low concentration of their constituents requires non-destructive measuring techniques as providing a high detection limit. Raman spectroscopy or SERS spectroscopy, respectively, provide these features together with the necessity for only minimal sample preparation. The presented experiments show rather convincingly that the SERS glass fiber probe is especially suitable for the investigation of sensitive samples. In particular this method allows for minimal invasive studies of biological material. Furthermore, it could be shown, that due to its geometrical properties the probe has a good spatial resolution allowing measurement down to the sub-micrometer region. Therefore, the fiber probe is especially suited for the investigation of extremely sensitive biological samples combined with only minimal amount of sample needed. The presented work nicely proofs that the optical gradient trap provides a tool enabling the measurement of single microorganism or micro particles in suspension. When working with the optical gradient trap a free three dimensional manipulation of the trapped cells inside the sample container is possible. In this manner, single cells could be held stable in the laser focus for a longer time period, allowing longer integration times. Furthermore, in this way an immobilization of the suspended cells on a functionalized surface can be avoided, whereby unwanted effects e. g. shifts of single bands or changes in relative band intensities, can be excluded. For the study of particulate contaminations it is not necessary to prepare the solution out of the container. Instead the microparticles can be hold and spectroscopically identified within the solution by the optical gradient trap. This, for example, allows the characterization of contaminations of pharmaceutical solutions without the necessity to open any phials. By doing so contaminations can be identified without risking further contaminations and therefore causing adulterated spectra. The combination of a micro Raman setup with a SERS glass fiber probe or an optical gradient trap allowed the study of biological systems in a sample sparing way and with a high spatial resolution. Additional signal enhancing effects can be achieved by using non contaminating SERS probes. Therefore, the applied excitation laser power can be kept low, although reasonable Raman spectra could be obtained for short acquisition times. The two laser solution for the optical gradient trap proved to be a reliable tool for the contact free manipulation of small particles in combination with flexibility in relation to the excitation wavelength. The application of two different lasers for trapping and Raman excitation provides a reliable tool for a contact free manipulation of small particles together with the possibility to chose the Raman excitation wavelength according to the investigated samples. KW - Biologisches Material KW - Raman-Spektroskopie KW - Oberflächenverstärkter Raman-Effekt KW - Raman KW - SERS KW - Fasersonde KW - Optische Gradientenfalle KW - Raman KW - SERS KW - fiber probe KW - optical gradient trap Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-8626 ER - TY - THES A1 - Strehle, Marion A. T1 - Mikroskopische und spektroskopische Charakterisierung biologisch relevanter Oberflächen T1 - Microscopic and spectroscopic characterization of biologically relevant surfaces N2 - In dieser Arbeit werden biologisch relevante Oberflächen untersucht, die in der Medizin bzw. in der Biologie eine wichtige Rolle spielen. Die Proteinadsorption auf Implantat-Oberflächen wurde charakterisiert, um wichtige Informationen über den Adsorptionsprozess zu erhalten. Das Fernziel hierbei ist, durch ein umfassendes Wissen über diesen für die Implantation wichtigen Schritt Biomaterialien mit möglichst hoher Gewebeverträglichkeit zu entwickeln. Die Verteilung von Propolis auf der Wachs-Oberfläche von Bienenwaben wurde untersucht, um mehr über dessen Nutzen, der noch nicht vollständig aufgeklärt ist, zu erfahren und um auf mögliche Auswirkungen einer veränderten Wabenstruktur auf die Kommunikation der Honigbienen Rückschlüsse ziehen zu können. Das Ziel des ersten Teils dieser Arbeit war, das Adsorptionsverhalten der Proteine Fibrinogen, Albumin und Fibronektin auf Titandioxid, einem in der Medizin häufig als Implantat eingesetzten Material, zu studieren. Die Adsorption von Proteinen auf der Oberfläche von Implantaten ist ein wichtiger Schritt für die Gewebeverträglichkeit bzw. Biokompatibilität dieser Materialien. Es wurden sowohl die räumliche Verteilung der Proteine auf den Implantat-Oberflächen als auch die durch die Adsorption hervorgerufenen strukturellen Veränderungen der Proteine untersucht. Als Methoden wurden hierfür die Laser-Raster-Mikroskopie (LSM), die Kraftfeldmikroskopie (AFM) sowie die Raman-Spektroskopie eingesetzt. Durch ein umfassendes Wissen über den Adsorptionsprozess der Proteine auf Implantat-Materialien können die Oberflächen der Implantate dahingehend verändert werden, dass es zu einer besseren Proteinadsorption und dadurch zu einer noch geringeren Rate an Abstoßungsreaktionen kommt. Die in dieser Arbeit vorgestellten Ergebnisse können einen Teil zum Verständnis des Adsorptionsprozesses beitragen. Das Ziel des zweiten Teils dieser Arbeit war es, die chemische Zusammensetzung von Propolis (dem Kittharz der Bienen) und Wabenwachs von Apis mellifera carnica Pollm. sowie die räumliche Verteilung von Propolis auf den Waben-Oberflächen zu untersuchen. Hierzu wurden die Raman-Spektroskopie und Raman-Mapping eingesetzt. Es wurden zunächst Raman-Spektren von Propolis-Proben sowie Raman-Spektren von charakteristischen Standardsubstanzen des Propolis aufgenommen. Das Propolis-Spektrum sowie das Wachs-Spektrum wurden durch eine Auswahl an Standardsubstanzen simuliert. Um herauszufinden, welche Harze von den Bienen gesammelt und als Propolis im Stock verwendet werden, wurden von einigen Harzen, die als Propolis-Quellen in Betracht kommen, Raman-Spektren aufgenommen. Es wurde auch analysiert, ob die Kettenlängen der Alkane, aus denen die Wachse bestehen, einen Einfluss auf die Raman-Spektren hat. Mittels Raman-Mapping wurde schließlich die räumliche Verteilung von Propolis auf der Waben-Oberfläche untersucht. Die hier charakterisierten biologisch relevanten Oberflächen spielen eine wichtige Rolle in der Medizin und in der Biologie. Die Analyse mit mikroskopischen und spektroskopischen Methoden verschafft einen Einblick in die Prozesse, die sich an diesen Oberflächen abspielen. Die Proteinadsorption auf Implantat-Oberflächen sind für die Implantationsmedizin von Bedeutung. Es werden ständig neue Materialien entwickelt, die eine möglichst gute Biokompatibilität aufweisen sollen. Erkenntnisse über die Prozesse, die hierfür eine Rolle spielen, helfen bei der Entwicklung neuer Materialien. Die Verteilung von Propolis auf den Wachs-Oberflächen hat einen Einfluss auf die Materialbeschaffenheit der Waben. Dies könnte die Vibrationsweiterleitung beim Schwänzeltanz der Honigbienen, der für deren Kommunikation von Bedeutung ist, beeinflussen. Die Verteilung des Propolis auf den Waben konnte für kleine Ausschnitte gezeigt werden. Inwiefern eine Propolisschicht auf den Stegen der Waben die Vibrationsweiterleitung tatsächlich beeinflusst, muss durch weiterführende Experimente herausgefunden werden. N2 - In this work biologically relevant surfaces are investigated, which play an important role in medicine and biology, respectively. The protein adsorption on implant surfaces has been characterized in order to gain important information about the adsorption process. The future goal lies in the development of biomaterials with the highest possible tissue compatibility on the basis of an extensive knowledge about this step which is essential for the implantation. The distribution of propolis on the wax surface of honeycomb was studied to reveal information about its use, which is so far not fully known, and to draw conclusions if a changed honeycomb structure has any influence on the communication of honeybees. The aim of the first part of this work was to study the adsorption behavior of the proteins fibrinogen, albumin and fibronectin on titanium dioxide, a commonly used implant material in medicine. The protein adsorption on an implant surface is an important process for the materia's tissue or biocompatibility. The spatial distribution of the protein on the implant surfaces was studied as well as structural changes of the protein due to adsorption. As methods laser scanning microscopy (LSM), atomic force microscopy (AFM) and Raman spectroscopy were employed. With a profound knowledge about the adsorption process of proteins on implant materials the implant surfaces can be altered in such a way that a better protein adsorption takes place and the amount of repulsive reactions is lowered. The results presented in this work can contribute to a better understanding of such an adsorption process. The goal of the second part of this work was the investigation of the chemical composition of propolis and of the honeycomb wax from the honeybee Apis mellifera carnica Pollm. Furthermore the spatial distribution of propolis on the honeycomb surfaces was determined employing Raman spectroscopy and Raman mapping. First of all Raman spectra of characteristic propolis samples and characteristic standard components of propolis have been recorded. The propolis spectrum as well as the wax spectrum were simulated through a selection of various standard components. To discover the kind of resins collected by the bees and used as propolis in the hive, Raman spectra of certain resins which can be considered as the propolis source were measured. Additionally, a possible influence of the chain length of the alkanes forming the waxes on the Raman spectra was investigated. The spatial resolution of propolis on the honeycomb surface has been studied by means of Raman mapping. The biologically relevant surfaces characterized in this work play an important role in medicine and biology. The analysis employing microscopic and spectroscopic methods gives insight into the processes on the surface. Protein adsorption on implant surfaces a re important for implantation medicine. All the time new materials are developed with an improved biocompatibility. Knowledge about the processes taking place are of relevance for the development of new materials. The distribution of propolis on wax surfaces has an impact on the material condition of the honeycomb. This might be of interest for the vibration prolongation during the wagging dances of the honeybees, which is important for their communication. The propolis distribution on the honeycomb has been determined for some small sectors. In further experiments the role of the propolis layer on the ligaments of the honeycomb for the vibration prolongation needs to be investigated. KW - Implantat KW - Oberfläche KW - Biokompatibilität KW - Biokompatibilität KW - Nano-Partikel KW - Proteine KW - Propolis KW - Raman KW - biocompatibility KW - nano particle KW - protein KW - propolis KW - Raman Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-5775 ER - TY - THES A1 - Flachenecker, Günter T1 - Die Dissoziations- und Rekombinations-Reaktion von Jodmolekülen in mikroporösen Porosil-Kristalliten auf der Femtosekunden-Zeitskala T1 - The femtosecond time resolved dissociation and recombination reaction of Iodine molecules which are resided in microporous crystalline Porosils N2 - In dieser Arbeit wurde die unimolekulare Dissoziations- und Rekombinations-Reaktion von Jodmolekülen untersucht, die in mikroporösen Porosil-Kristalliten eingelagert waren. Hierfür wurden sowohl experimentelle Pump-Probe-Experimente als auch theoretische Untersuchungen auf der Femtosekunden-Zeitskala durchgeführt. Die Idee, die diesen Experimenten zugrunde lag, bestand darin, zu erfahren, in welcher Weise und in welchem Maße die Struktur der Umgebung einen Einfluss auf die elementaren dynamischen Prozesse der Reaktion ausübt. Die hier untersuchten Systeme I$_2$ in DDR-, TON-, FER- und MFI-Porosilen sind Modellsysteme für komplexere Moleküle, eingelagert in einer mikroporösen kristallinen Umgebung. N2 - The thesis presents experimental as well as theoretical investigations of the unimolecular reaction of iodine molecules embedded in different porosils. The elementary steps of the reaction could be accessed using femtosecond time-resolved pump-probe spectroscopy. The main goal of the research work was to learn more about the influence of the surroundings of the reacting molecules on the reaction dynamics resulting in dissociation and recombination processes. The iodine molecules enclosed in varying geometrical structures of DDR, TON, FER, and MFI porosils can be considered models for more complex molecular systems even including elementary catalytical processes in the microporous zeolites. KW - Tectosilicate KW - Iodmolekül KW - Molekularbewegung KW - Pump-Probe-Technik KW - Zeolithe KW - Prädissoziation KW - Käfig-Rekombination KW - Wirt-Gast-Wechselwirkung KW - Moleküldynamik KW - Zeolites KW - Predissociation KW - Caging KW - Host-Guest Interaction KW - Molecular Dynamics Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4472 ER - TY - THES A1 - Baia, Gheorghe Lucian T1 - Theory and applications of confocal micro-Raman spectroscopy on hybrid polymer coatings and PDMS membranes and spectroscopic studies of doped B2O3-Bi2O3 glass systems T1 - Theorie und Anwendung der konfokalen Mikro-Raman-Spektroskopie an hybriden Polymer-Schichten und PDMS-Membranen und spektroskopische Untersuchungen an dotierten B2O3-Bi2O3 Glas-Systemen N2 - The thesis consists of two major parts. The first part contains a theoretical-experimental study of confocal micro-Raman spectroscopy on hybrid polymer coatings and an application of this spectroscopic method on PDMS-membranes. The theoretical-experimental study includes the application of a model that describes the influence of the refraction effect on the focus length on confocal Raman experiments, and the development of a new model that additionally takes into account the effect of diffraction on the focus dimensions. A parallel comparison between these two theoretical approaches and experimental data has been also drawn and a better agreement between theory and experiment was observed, when both refraction and diffraction effects were considered. Further, confocal resonance micro-Raman spectroscopy has been applied to characterise the diffusion processes of pharmacologically relevant molecules (b-carotene dissolved in dimethylsulfoxide) through a polydimethylsiloxane (PDMS)-membrane. The diffusion rate as a function of the measurement depth and diffusion time as well as the concentration gradient under a steady flux have been determined. The measurements shown that the confocal micro-Raman technique is a powerful tool to investigate the kinetics of diffusion processes within a membrane before the steady state has been reached. The second part of the thesis contains infrared and Raman spectroscopic studies of copper and iron doped B2O3-Bi2O3 glass systems. These studies were performed to obtain specific data regarding their local structure and the role played by dopant ions on boron and bismuthate units. The changes of B2O3 and Bi2O3 structural units due to the relaxation of the amorphous structure, which was induced in these samples by the thermal treatment, were also evidenced. N2 - Die vorliegende Arbeit besteht aus zwei Teilen. Der erste Teil beschäftigt sich mit theoretischen und experimentellen Untersuchungen der konfokalen Mikro-Raman-Spektroskopie hybrider Polymer-Schichten und PDMS-Membranen. Dabei wurden besonders die Dimensionen des Fokus in den Proben untersucht, um so einen tieferen Einblick in die bei solchen Messungen auftretenden physikalischen Phänomene zu erhalten. Es wurde zur Berechnung des konfokalen Mikro-Raman-Response-Profils für verschiedene Eindringtiefen innerhalb zweier unterschiedlich beschichteter Proben eine auf Strahlverfolgung basierende Analyse durchgeführt, wobei die sphärische Aberration, die an der Luft/Beschichtungs-Grenzfläche entsteht, mit berücksichtigt wurde. Außerdem wurde ein theoretischer Ansatz entwickelt, der den Einfluss von Brechung und Beugung auf die Fokusverlängerung bei konfokalen Mikro-Raman-Experimenten beschreibt. Im Vergleich zu dem Modell, das nur den Brechungseffekt in Betracht zieht, wird eine Verkürzung der Fokuslänge erreicht, wenn Brechungs- und Beugungseffekte betrachtet werden, was die Übereinstimmung zwischen experimentellen und theoretischen Daten verbessert. Desweiteren wurden die Diffusion von ß-Carotin durch PDMS-Membranen mittels der konfokalen Resonanz-Mikro-Raman-Spektroskopie untersucht. Zunächst wurden Untersuchungen der Diffusionskinetik vor Erreichen des stationären Zustandes durchgeführt. Hierbei konnte die Diffusionsgeschwindigkeit in Abhängigkeit von der Messtiefe und der Messzeit ermittelt werden. Es wurde zusätzlich der Konzentrationsgradient im stationären Fluss von b-Carotin in PDMS-Membranen untersucht. Die Untersuchungen mit der konfokalen Resonanz-Mikro-Raman-Spektroskopie zeigten, dass diese Methode geeignet ist, Diffusionskinetiken im nicht stationären Zustand innerhalb der Membranen zu beobachten. Derartige Untersuchungen sind extrem wichtig für die Entwicklung neuer Applikationsysteme zur kontrollierten Wirkstofffreisetzung. Im zweiten Teil der vorliegenden Arbeit wurden strukturelle Untersuchungen an Kupfer- und Eisen-dotierten B2O3-Bi2O3 Glas-Systemen mittels Infrarot- und Raman-Spektroskopie durchgeführt. Die lokale Struktur des Glas-Netzwerks und der Einfluss der dotierenden Ionen auf die Bismut-Borat Matrix wurden diskutiert. Desweiteren wurde der Einfluss des Bor-Netzes auf die strukturellen Einheiten des Bismuts in den wärmebehandelten Proben bewiesen. Raman- und Infrarot-Spektren der Proben nach Wärmebehandlung zeigten, dass sich die Glasstabilität verringert, wenn der Bismutgehalt zunimmt. KW - konfokal Mikro-Raman-Spektroskopie KW - Infrarot-Spektroskopie KW - hybrid Polymer-Schichten KW - PDMS-Membranen KW - Kupfer- und Eisen-dotierten Glas-Systemen KW - confocal micro-Raman spectroscopy KW - infrared spectroscopy KW - hybrid polymer coatings KW - PDMS-membranes KW - copper and iron doped glass systems Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4606 ER - TY - THES A1 - Bolboaca, Monica-Maria T1 - Vibrational characterisation of coordination and biologically active compounds by means of IR absorption, Raman and surface-enhanced Raman spectroscopy in combination with theoretical simulations T1 - Schwingungsspektroskopische Untersuchungen an Koordinationsverbindungen und biologisch aktiven Moleküle mittels IR-Absorptions-, Raman- und Oberflächenverstärkten Raman-Spektroskopie in Kombination mit theoretischen Simulationen N2 - The thesis contains two major parts. The first part deals with structural investigations on different coordination compounds performed by using infrared absorption and FT-Raman spectroscopy in combination with density functional theory calculations. In the first section of this part the starting materials Ph2P-N(H)SiMe3 and Ph3P=NSiMe3 and their corresponding [(MeSi)2NZnPh2P-NSiMe3]2 and Li(o-C6H4PPh2NSiMe3)]2·Et2O complexes have been investigated in order to determine the influence of the metal coordination on the P–N bond length. In the next section the vibrational spectra of four hexacoordinated silicon(IV) and germanium(IV) complexes with three symmetrical bidentate oxalato(2-) ligands have been elucidated. Kinetic investigations of the hydrolysis of two of them, one with silicon and another one with germanium, have been carried out at room temperature and at different pH values and it was observed that the hydrolysis reaction occurs only for the silicon compound, the fastest reaction taking place at acidic pH. In the last section of this part, the geometric configurations of some hexacoordinated silicon(IV) complexes with three unsymmetrical bidentate hydroximato(2-) ligands have been determined. The second part of the thesis contains vibrational investigations of some biologically active molecules performed by means of Raman spectroscopy together with theoretical simulations. The SER spectra of these molecules at different pH values have also been analysed and the adsorption behaviour on the metal surface as well as the influence of the pH on the molecule-substrate interaction have been established. N2 - Die vorliegende Arbeit besteht aus zwei Teilen. Der erste Teil beschäftigt sich mit strukturelle Untersuchungen einiger Koordinationsverbindungen mittels IR- und Raman-Spektroskopie in Kombination mit quantenchemischen Rechnungen basierend auf der Dichtefunktionaltheorie. In ersten Kapitel dieses Teils wurden die Edukten Ph2P-N(H)SiMe3 (1a) und Ph3P=NSiMe3 (1b) und ihren entsprechenden Metallkomplexen [(Me3Si)2NZnPh2PNSiMe3]2 (2a) und [Li(o-C6H4PPh2NSiMe3)]2·EtO (2b) untersucht, um so den Einfluss der Koordination zu einem Metallzentrum auf die P-N-Bindungslänge festzustellen. In nächsten Kapitel wurden die IR- und Raman-Spektren einiger neuer hexakoordinierten Silizium(IV)- und Germanium(IV)-Komplexe mit drei symmetrischen zweizähnigen Oxalato(2-)-Liganden untersucht. Zudem wurden noch kinetische Untersuchungen der Hydrolyse zweier Silizium- bzw. Germanium-Komplexe durchgeführt und es konnte festgestellt werden, dass die Hydrolysereaktion nur im Fall des Siliziumkomplexes auftritt. Die Geschwindigkeitskonstanten wurden bei Raumtemperatur für unterschiedliche pH-Werte bestimmt. Somit konnte gezeigt werden, dass die Reaktion am schnellsten im Säuren abläuft. In letzten Kapitel wurde die Konformation einiger hexakoordinierter Silizium(IV)-Komplexe mit drei antisymmetrischen zweizähnigen Liganden vom Hydroximato(2-)-Typ aufgeklärt. Im zweiten Teil der vorliegenden Arbeit wurden Raman-Spektroskopie in Kombination mit theoretischen Berechnungen zur Schwingungscharakterisierung einiger biologisch aktiver Moleküle angewandt. Die SER-Spektren für unterschiedliche pH-Werte wurden untersucht, um die Adsorptionsverhalten auf der Silberoberfläche zu beschreiben. KW - Komplexe KW - FT-Raman-Spektroskopie KW - Infrarotspektroskopie KW - FT-Raman-Spektroskopie KW - Infrarot-Spektroskopie KW - SERS KW - DFT KW - Koordinationsverbindungen KW - biologisch aktiven Moleküle KW - FT-Raman spectroscopy KW - infrared spectroscopy KW - SERS KW - DFT KW - coordination compounds KW - biologically active molecules Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4616 ER - TY - THES A1 - Seipel, Michael T1 - Chemische Wellen und Fronten in nichtlinearen Reaktions-Diffusions-Systemen T1 - Chemical waves and fronts in nonlinear reaction-diffusion-systems N2 - Die vorliegende Dissertation beschäftigt sich mit nichtlinearen Reaktions-Transport-Systemen, die in zweidimensionalen Medien chemische Wellen und propagierende Fronten ausbilden können. Grundlage dieser Art von räumlichen Mustern sind sogenannte erregbare Systeme. Ein Themengebiet der Arbeit umfasst die Untersuchung von Spiralwellen in der Belousov-Zhabotinsky-Reaktion (BZ-Reaktion). Ein weiterer Teilabschnitt behandelt die Wechselwirkung zwischen Polymersystemen und nichtlinearen chemischen Reaktionen. In den untersuchten, räumlich ausgedehnten Systemen spielt die Kopplung nichtlinearer chemischer Reaktionen an Transportprozesse eine wichtige Rolle. Die generischen Typen von chemischen Mustern sind Pulswellen in einer Raumdimension, kreisförmige Wellen und Spiralen in einem zweidimensionalen System und kugelschalen- bzw. schraubenförmige Wellen in drei Raumdimensionen. Auf theoretischer Basis werden Effekte von Spiralwellen bei Änderung der Erregbarkeit des Reaktionsmediums dargestellt.In der vorliegenden Arbeit ist es erstmals gelungen, eine Methode zu entwickeln, die es erlaubt die Erregbarkeit in der BZ-Reaktion sowie in einer Vielzahl weiterer nichtlinearer Reaktionen zu beeinflussen. Ein weiteres Themengebiet dieser Dissertation ist die Untersuchung von pH-Systeme in Hydrogelen. Dies sind hydrophile Gele, die ihr Volumen in wässrigen Lösungen verändern können. In der vorliegenden Arbeit wurden Gele auf der Basis von Acrylamid und Methacrylat als Copolymer verwendet und an die oben beschriebenen pH-Oszillatoren angekoppelt. Durch Polymerisation von Acrylamid zusammen mit Natriummethacrylat konnte ein mit einem pH-Oszillator beladenes Gel hergestellt werden, das nach Start der Reaktion durch eine kleine Menge Säure mit einer deutlichen Volumenkontraktion reagiert. Diese Kontraktion des Gels konnte ausgenutzt werden, um die chemische Energie eines pH-Reaktionssystems in eine mechanische Kraftwirkung umzuwandeln. N2 - In this thesis nonlinear reaction-transport-systems are presented, which have the ability to form chemical waves and propagating fronts in two-dimensional media. The theoretical basis for an understanding of these kinds of patterns is the theory of excitability in reaction-diffusion-systems. This work is made up of two main sections: One part comprises the investigation of spiral waves in the Belousov-Zhabotinsky reaction (BZ reaction). The other section describes the interaction between polymer networks and nonlinear chemical reactions. Effects of changing excitability in the reaction medium on spiral waves are explained theoretically. In the present thesis for the first time a method was establised, which allows to deliberately control the excitability of the BZ reaction. Another part of the thesis describes nonlinear pH systems in hydrogels. In these autocatalytic reactions a periodic change of the pH can be observed. The pH systems have been coupled to hydrogels. These polymers are hydrophilic and are able to change their volume in aqueous solution. All of the investigated systems generate propagating acidity fronts after locally acidifying the gel with a small amount sulfuric acid. By polymerizing acrylamide together with sodium methacrylate a gel (loaded with a pH oscillator) was produced, that showed a contraction in volume after starting the reaction with a small amount of acid. This contraction was used to convert the chemical energy of a pH reaction system into a mechanical force effect: A small weight fixed to a strip of gel was lifted a few millimeters after starting the reaction inside the gel with acid. KW - Hydrogel KW - Nichtlineares Phänomen KW - Wasserstoffionenkonzentration KW - Nichtlineare Welle KW - Belousov-Zabotinskij-Reaktion KW - Nichtlinearität KW - Reaktions-Diffusions-Systeme KW - BZ-Reaktion KW - Erregbarkeit KW - Hydrogel KW - Nonlinearity KW - reaction-diffusion-systems KW - BZ reaction KW - excitability KW - hydrogel Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-3392 ER - TY - THES A1 - Rösch, Petra T1 - Raman-spektroskopische Untersuchungen an Pflanzen und Mikroorganismen T1 - Raman spectroscopic investigations on plants and microorganisms N2 - In dieser Arbeit werden Pflanzen, Pflanzengewebe, Pflanzenzellen und Mikro-organismen spektroskopisch untersucht und ihre Inhaltsstoffe unter minimaler Probenpräparation im biologischen Gewebe direkt lokalisiert und identifiziert. Unter den verfügbaren Schwingungs-spektroskopischen Methoden ist die Mikro-Raman-Spektroskopie für diese Fragestellungen besonders gut geeignet, da Wasser Raman-Spektren nur wenig beeinflusst. Daher kann mit Raman-spektroskopischen Methoden auch in stark wasserhaltigem Gewebe gemessen werden. Weiterhin erhält man mit der Mikro-Raman-Spektroskopie eine gute räumliche Auflösung im sub-µm-Bereich, wodurch es möglich ist, heterogene Proben zu untersuchen. Darüber hinaus kann die Mikro-Raman-Spektroskopie mit anderen Methoden, wie z. B. der oberflächenverstärkten Raman-Spektroskopie (SERS), kombiniert werden. In pflanzlichen Zellen liegt eine Vielzahl von Substanzen in geringen Konzentrationen vor. Aufgrund der niedrigen Quantenausbeute des Raman-Effekts treten vor allem Substanzen, die eine Resonanz-Verstärkung erfahren, in den Spektren hervor. Diese Substanzen, wie z. B. b-Carotin, können deshalb in geringen Konzentrationen detektiert werden. Der Schwerpunkt dieser Arbeit liegt in der Untersuchung von Sekundär-Metaboliten wie Alkaloiden, Lipiden oder Terpenen, die in der Pflanze agglomerieren. Neben der Identifikation von Inhaltsstoffen, können die Raman-Spektren von Pflanzen für die chemotaxonomische Klassifizierung mit Hilfe der hierarchischen Clusteranalyse verwendet werden. Die Identifizierung von Mikroorganismen auch in sehr geringen Mengen (Monolage, einzelne Zellen) ist mit der Mikro-Raman-Spektroskopie nur unter bestimmten Voraussetzungen durchführbar. Für weitergehende Untersuchungen wird hier die SERS-Sonde oder ein TERS-Aufbau verwendet werden. N2 - This thesis concentrates on the spectroscopic investigation of plants, plant tissue, plant cells as well as microorganisms. The characteristic components of the biological cells have been localized and identified directly in the biological tissue with minimal sample preparation only. Among the different vibrational spectroscopic methods micro Raman spectroscopy appears to be the most suitable technique for such scientific investigations. For example, water which shows sharp absorptions in the infrared is only a weak Raman scatterer. Thus biological tissues containing a high amount of water can be easily studied with Raman spectroscopy. Due to the use of laser light for the excitation of Raman scattering sub-µm spatial resolution can be realized by micro Raman spectroscopy. This allows the investigation of very heterogeneous samples. Furthermore, micro Raman spectroscopy can be combined with other methods such as surface enhanced Raman spectroscopy (SERS). Plant cells consist of a great variety of substances at low concentrations. As the Raman effect has a poor quantum yield mostly resonance enhanced substances can be identified in the resulting spectra. These substances like e. g. b-carotene can be detected down to very low concentrations. The main focus lies on the investigation of secondary metabolites such as alkaloids, lipids or terpenes, which agglomerate in the plant. Besides the identification of plant components, Raman spectra allow the chemotaxonomic classification of plants when combined with a hierarchical cluster analysis. The identification of microorganisms in low amounts (monolayers, single cells) could only be achieved with Raman spectroscopy when certain conditions are met. Further investigations should focus on the SERS probe or the TERS setup. KW - Pflanzen KW - Raman-Spektroskopie KW - Mikroorganismus KW - Oberflächenverstärkter Raman-Effekt KW - Sekundärmetabolit KW - Mikro-Raman-Spektroskopie KW - SERS KW - Lipide KW - ätherische Öle KW - Clusteranalyse KW - Microorganismen KW - micro Raman spectroscopy KW - SERS KW - lipids KW - essential oils KW - cluster analysis KW - microorganisms Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-3539 ER - TY - THES A1 - Pavel, Ioana-Emilia T1 - Vibrational spectroscopy and density functional theory calculations, a powerful approach for the characterization of pharmaceuticals and new organometallic complexes T1 - Schwingungsspektroskopie und Dichtefunktionaltheorie-Rechnungen, ein vielversprechender Ansatz zur Charakterisierung von Pharmazeutika und neuer metallorganischer Komplexe. N2 - In the current work, several well-known pharmaceuticals (1,4-dihydrazinophthalazine sulfate, caffeine, and papaverine hydrochloride) and new organometallic compounds (nickel(II) cupferronato complexes NiL2An, L = PhN2O2-, n = 1, A = o-phenanthroline (1), o,o’-bipyridine (2) and n = 2, A = H2O (3), o-NH2Py (4), o-C6H4(NH2)2 (5); silylene-bridged dinuclear iron complexes [Cp(OC)2Fe]2SiX2 (X = H (6), F (7), Cl (8), Br (9), I (10)); 3-silaoxetane 3,3-dimethyl-2,2,4,4-tetraphenyl-1-oxa-3-silacyclobutane (11) and 3-silathietane 3,3-dimethyl-2,2,4,4-tetraphenyl-1-sila-3-thiacyclobutane (12) compounds), which have successfully been characterized by using vibrational spectroscopy in conjunction with accurate density functional theory (DFT) calculations, are presented. The DFT computed molecular geometries of the species of interest reproduced the crystal structure data very well and in conjunction with IR and Raman measurements helped us to clarify the structures of the compounds, for which no experimental data were available; and this, especially for the new organometallic compounds, where the X-Ray analysis was limited by the non-availability of single crystals (3, 5, 10). Furthermore, a natural population analysis (NPA) and natural bond orbital (NBO) calculations together with a detailed analysis of the IR and Raman experimental as well as calculated spectra of the new organometallic compounds, allowed us to study some special bonding situations (1-12) or to monitor the structural changes observed with the change in temperature during the Raman experiments (11, 12). By combining these two methods (DFT and vibrational spectroscopy), the auspicious results obtained on the organometallic compounds 6-12 and overall in literature, made us confident of the power of theoretical calculations in aiding the interpretation of rich SERS spectra by solving some interesting issues. Consequently, the Raman and SERS spectra of well-known pharmaceuticals (1,4-dihydrazinophthalazine sulfate, caffeine, and papaverine hydrochloride) or new potentially biological active organometallic complexes (1-5), that were synthetized by our coworkers, were discussed with the assistance of the accurate results obtained from DFT calculations (structural parameters, harmonic vibrational wavenumbers, Raman scattering activities), and many previous incomplete assignments have been analyzed and improved. This allowed us to establish the vibrational behavior of these biological compounds near a biological artificial model at different pH values or concentrations (Ag substrate), taking into account that information about the species present under particular conditions could be of great importance for the interpretation of biochemical processes. The total electron density of molecules and the partial charges situated on selected atoms, which were determined theoretically by NPA, allowed us to establish the probability of different atoms acting as an adsorptive site for the metal surface. Moreover, a closer examination of the calculated orbitals of molecules brought further arguments on the presence or absence of the photoproducts at the Ag surface during the irradiation (1,4-dihydrazinophthalazine sulfate). Overall, the results provide a benchmark illustration of the virtues of DFT in aiding the interpretation of rich vibrational spectra attainable for larger polyatomic adsorbates by using SERS, as well as in furnishing detailed insight into the relation between the vibrational properties and the nature of the Ag substrate-adsorbate bonding. Therefore, we strongly believe that theoretical calculations will become a matter of rapidly growing scientific and practical interest in SERS. N2 - In der vorliegenden Arbeit werden allgemein bekannte Pharmazeutika (1,4-Dihydrazin-phtalazinsulfat, Koffein und Papaverinhydrochlorid) und mehrere neue metallorganische Verbindungen (Nickel(II)-Kupferron-Komplexe NiL2An, L = PhN2O2-, n = 1, A = o-phenanthrolin (1), o,o’-bipyridine (2) and n = 2, A = H2O (3), o-NH2Py (4), o-C6H4(NH2)2 (5); Silicium-verbrückte dinucleare Eisen-Komplexe [Cp(OC)2Fe]2SiX2 (X = H (6), F (7), Cl (8), Br (9), I (10)); 3-Silaoxetan 3,3-Dimethyl-2,2,4,4-tetraphenyl-1-oxa-3-silacyclobutan (11) und 3-Silathietan 3,3-Dimethyl-2,2,4,4-tetraphenyl-1-sila-thiacyclobutan (12) Verbindungen) vorgestellt, die erfolgreich unter Verwendung schwingungsspektroskopischer Methoden in Verbindung mit genauen DFT Rechnungen charakterisiert worden sind. Die mittels DFT berechneten Molekülgeometrien der uns interessierenden Substanzen gaben die Daten, die aus Kristallstrukturanalyse erhalten worden sind, sehr gut wieder und halfen uns zusammen mit IR- und Raman-Messungen die Strukturen der Verbindungen aufzuklären, für die bisher keine experimentellen Daten erhältlich waren. Besondere Aufmerksamkeit wurde denjenigen neuen Metallorganika geschenkt, deren Röntgenstrukturanalyse (3, 5, 10) auf Grund der Fehlens von Einkristallen eingeschränkt war. Desweiteren erlaubten uns “natural population analysis” (NPA)- und ” natural bond orbital“ (NBO)-Analysen, ebenso wie detallierte Auswertungen der experimentellen und berechneten Spektren (IR, Raman) der metallorganischen Verbindungen, die Untersuchung spezieller Bindungssituationen (1-12) und die strukturellen Änderungen (11, 12) zu verfolgen, die mit der Variation der Temperatur während der Raman-Messungen einhergehen. Die vielversprechenden Ergebnisse der Untersuchungen an metallorganischen Verbindungen 6-12 sowie entsprechende bisher publizierte Ergebnisse, die durch Kombination dieser zwei Methoden (DFT und Schwingungsspektroskopie) erhalten worden sind, machten uns zuversichtlich, dass theoretische Berechnungen bei der Auswertung auch komplexer SERS-Spektren durch Lösung einiger interessanter Probleme sehr behilflich sein könnten. Folglich konnten die Raman- und SERS-Spektren von bekannten Pharmazeutika (1,4-Dihydrazin-phtalazinsulfat, Koffein und Papaverinhydrochlorid) oder von neuen, potentiell biologisch aktiven Organometall-Komplexen (1-5), die von Mitarbeitern anderer Institute synthetisiert worden sind, unter Zuhilfenahme genauer Ergebnisse aus DFT-Rechnungen (strukturelle Parameter, harmonische Schwingungswellenzahlen, Raman-Streuaktivitäten) interpretiert werden. So war es möglich, viele bisher unvollständig zugeordnete Schwingungen zuzuordnen und zu erklären. Dies erlaubte uns, das Schwingungsverhalten dieser biologischen Substanzen innerhalb eines künstlichen biologischen Modells (Ag-Substrat) bei verschiedenen pH-Werten und Konzentrationen zu ermitteln. Informationen über das Verhalten solcher Verbindungen unter besonderen Bedingungen könnten bei der Interpretation biologischer Prozesse eine wichtige Rolle spielen. Die totale Elektronendichte dieser Moleküle und die Partialladung an unterschiedlichen Atomen, die durch NPA bestimmt wurden, ermöglichten uns, die Adsorptionswahrscheinlichkeit verschiedener Atome an bestimmten Stellen der Metalloberfläche zu ermitteln. Ferner lieferte eine genauere Betrachtung der berechneten Molekülorbitale weitere Hinweise auf das Auftreten oder Fehlen von Photoprodukten auf der Silberoberfläche während der Bestrahlung (1,4-Dihydrazin-phtalazinsulfat). Zusammenfassend zeigen die Ergebnisse die Vorteile von DFT-Rechnungen bei der Interpretation komplexer Schwingungsspektren größerer polyatomarer Adsorbate auf, die nur unter Ausnützung des SERS-Effekts aufgenommen werden können. Auch tragen sie dazu bei, einen detaillierten Einblick in den Zusammenhang zwischen den Schwingungseigenschaften und der Natur der Silbersubstratadsorbat-Bindung zu liefern. Demzufolge sind wir davon überzeugt, dass theoretische Methoden einen größeren Stellenwert bei einem schnell wachsenden wissenschaftlichen und praktischen Interesse an SERS gewinnen werden. KW - Arzneimittel KW - Oberflächenverstärkter Raman-Effekt KW - Dichtefunktionsformalismus KW - Infrarot- und Raman-Spektroskopie KW - SERS KW - DFT KW - Pharmazeutika KW - neue metallorganische Komplexe KW - Infrared and Raman spectroscopy KW - SERS KW - DFT KW - pharmaceuticals KW - new organometallic complexes Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-7186 ER - TY - THES A1 - Rützel, Stefan T1 - Pulse-Sequence Approaches for Multidimensional Electronic Spectroscopy of Ultrafast Photochemistry T1 - Pulssequenzmethoden zur multidimensionalen elektronischen Spektroskopie ultraschneller Photochemie N2 - Observing chemical reactions in real time with femtosecond laser pulses has evolved into a very popular � field of research since it provides fascinating insights into the nature of photochemical transformations. Nevertheless, many photochemical reactions are still too complex for which reason the underlying mechanisms and all engaged species cannot be identi� fied thoroughly. In these cases, conventional time-resolved spectroscopy techniques reach their technical limits and advanced approaches are required to follow the conversion of reactants to their products including all reaction intermediates. The aim of this work was therefore the development of novel methods for ultrafast spectroscopy of photoreactive systems. Though the concept of coherent multidimensional spectroscopy has so far exclusively been used to explore photophysical phenomena, it also offers great potential for the study of photochemical processes due to its capability of extracting spectroscopic information along several frequency dimensions. This allows resolving the photochemical connectivity between various interconvertible molecular species with ultrafast temporal resolution on the basis of their absorption and emission properties as the spectral correlations are explicitly visualized in the detected spectra. The ring-open merocyanine form of the photochromic compound 6-nitro BIPS was studied in Chap. 4 of this work. Merocyanines and their associated ring-closed spiropyrans are promising candidates for future applications as, for instance, molecular electronics or optical data storage due to their unique property of being switchable between two stable con� gurations via light illumination. Transient absorption with sub-50 fs temporal resolution and broadband probing was employed to characterize the photodynamics of this system with variable excitation wavelengths. Using global data analysis, it could be inferred that two different merocyanine isomers with differing excited-state lifetimes exist in solution. These isomers differ in the cis/trans con� guration in the last bond of the methine bridge. The minority of isomers exist in the all-trans con� guration (TTT) while the isomer with a cis con� guration of the third dihedral angle (TTC) is dominant. A characteristic band, detected after long pump-probe delays, was attributed to the unidirectional cis->trans photoisomerization reaction of the TTC to the TTT form. The quantum yield of the reaction was estimated to be (18� +-4) %. In addition, pronounced coherent vibrational wave-packet oscillations were observed and it was concluded that these signatures are related to the product formation. Coherent two-dimensional electronic spectroscopy was successfully implemented using a partially collinear pump-probe beam geometry in combination with a femtosecond pulse shaper. The use of a whitelight probe continuum enabled us to probe contributions far-off the diagonal over the complete visible range. By properly adjusting the relative phase between the � first two laser pulses with the pulse shaper, the principle of phase-cycling was explained and it was demonstrated that the measurement can be carried out in the so-called "rotating frame" in which the observed frequencies detected during the coherence time are shifted to lower values. It was shown that these concepts allow the extraction of the desired background-free photon echo while the amount of necessary data points is highly reduced. In order to put our proposal of multidimensional spectroscopy of photoreactive systems into practice, third-order two- and three-dimensional spectroscopy was then employed for an in-depth analysis of a photoreactive process, in which the photoisomerization of 6-nitro BIPS served as a model system. The measured two-dimensional spectra revealed the cis->trans photoisomerization after long population times. By collecting a large data set of two-dimensional spectra for short population times and by applying a Fourier transform along the population time axis, the third-order three-dimensional spectrum was obtained. The novelty of this approach compared to coherent two-dimensional spectroscopy is the introduction of a third axis associated with the vibrational frequencies of the molecular system. In this way, the formation of the reaction product was evidenced and it was shown that the product is formed in its fi� rst excited singlet state within 200 fs after excitation. This method hence visualizes the photochemical connections between different reactive molecular species in an intuitive manner and further exposes the normal modes connecting reactant and product. Such conclusions cannot be drawn with conventional third-order techniques such as transient absorption since they are not capable of capturing the full third-order response, but only a subset of it. The reaction mechanism and the role of the observed vibrational modes were uncovered by comparing the experimental data with the results of high-level quantum-chemical calculations performed by our collaborators in the group of Prof. B. Engels from the theoretical chemistry department at the University of Würzburg. Specifi� c calculated molecular normal modes could be assigned to the experimentally observed vibrational frequencies and potential energy surfaces of the electronic ground state and of the � first excited state were computed. The technique implemented in this chapter is general and is applicable for the time-resolved analysis of a wide range of chemical reaction networks. In the fi� rst part of Chap. 5, coherent two-dimensional spectroscopy was employed to track the reaction paths of the related 6,8-dinitro BIPS after S1 excitation. Several differences to the photochemical properties of 6-nitro BIPS were found. From the 2D spectra, the cis-trans isomerization between the two merocyanine isomers could be excluded as a major reaction path for this compound. To explore the dynamics after reexcitation to higher-lying electronic states, pump-repump-probe spectroscopy was implemented and the formation of a new species, a radical cation, was observed. To identify the precursor isomer, triggered-exchange two-dimensional spectroscopy, a � fifth-order technique previously only available in the infrared regime for vibrational transitions, was implemented for the fi� rst time for electronic excitations in the visible. This approach combines the properties of the pump-repump-probe technique with the potential of coherent two-dimensional spectroscopy. It correlates the absorption frequency of a reactive molecular species with the emission signatures of the product formed from this species after an additional absorption of a photon. Using this method, it was unambiguously proven that only the TTC isomer reacts to the radical cation thus forming the precursor species of the reaction. Electronic triggered-exchange two-dimensional spectroscopy is hence another improved technology for time-resolved spectroscopy with applications in the study of multistep photoreactions and higher-lying electronic states. While in the two preceding chapters third- and � fifth-order experiments were discussed that neglect the vectorial character of light-matter interactions, Chap. 6 focused on a novel theoretical formalism enabling the description of light fi� elds optimized for polarization-sensitive higher-order nonlinearities. This formalism is based on the von Neumann time-frequency representation of shaped femtosecond laser pulses which permits the defi� nition of multipulse sequences on a discrete time-frequency lattice. Hence, not only the temporal spacing between subpulses is adjustable, but also the center frequencies may be adapted such that they � fit the experimental requirements. This method was generalized to the description of pulse sequences with time-varying polarization states. It was shown that by using this description, the polarization ellipticity, orientation angle, relative phase and intensity, and the time-frequency location of each subpulse is explicitly controllable. The accuracy of the transformations from Fourier space to von Neumann domain and vice versa was demonstrated. Moreover, a strict accordance between the von Neumann polarization parameters with the conventional parameters in time domain was found for well separated subpulses. A potential future application of this approach is polarization-sensitive multidimensional spectroscopy in which hidden cross peaks may be isolated by de� fining the pulses in the von Neumann picture with suitable polarization sequences. This method could also be used in quantum control experiments in which the polarization of the light fi� eld is used as a major control knob. This thesis summarizes our efforts to open the � field of femtochemistry to the concept of coherent multidimensional electronic spectroscopy. Making use of femtosecond pulse shaping, sub-50 fs temporal resolution, broadband spectral probing, higher-order nonlinearities, and new types of laser pulse descriptions, the presented methods might stimulate further future advancements in this research area. N2 - Mit Hilfe von Femtosekundenlaserpulsen lassen sich chemische Reaktionen in Echtzeit beobachten, was sich zu einem äußerst populären Forschungsgebiet entwickelt hat, welches faszinierende neue Einblicke in die Natur von photochemischen Transformationen ermöglicht. Nichtdestotrotz sind nach wie vor viele photochemische Reaktionen zu komplex, um die zugrunde liegenden Mechanismen entschlüsseln und alle beteiligten Spezies einwandfrei identifizieren zu können. In diesen Fällen stoßen die konventionellen zeitaufgelösten Techniken an ihre Grenzen, sodass verbesserte Ansätze notwendig sind um der Konversion der Edukte zu den Produkten mit allen reaktiven Zwischenprodukten in Gänze folgen zu können. Das Ziel der vorliegenden Arbeit war deshalb die Entwicklung neuartiger Methoden in der Ultrakurzzeitspektroskopie photoreaktiver Systeme. Obwohl das Konzept der kohärenten multidimensionalen Spektroskopie bisher ausschließlich zur Erforschung photophysikalischer Phänomene eigesetzt wurde, birgt es angesichts seiner Fähigkeit, spektroskopische Informationen entlang mehrerer Frequenzachsen zu extrahieren, auch großes Potenzial für die Untersuchung photochemischer Prozesse. Diese Eigenschaft ermöglicht die Auflösung des photochemischen Austauschs zwischen untereinander verknüpften molekularen Spezies durch ihre Emissions- und Absorptionseigenschaften, da die spektralen Korrelationen in den gemessenen Spektren unmittelbar visualisiert werden. In Kap. 4 dieser Arbeit wurde die ringgeöffnete Merocyaninform der photochromen Verbindung 6-nitro BIPS untersucht. Aufgrund ihrer besonderen Eigenschaft, durch Lichteinstrahlung zwischen zwei stabilen Konfigurationen umschalten zu können, sind Merocyanine und ihre assoziierten ringgeschlossenen Spiropyrane vielversprechende Kandidaten für zukünftige Anwendungen auf dem Gebiet der molekularen Elektronik und der optischen Datenspeicherung. Die Photodynamiken dieses Systems wurden mit Hilfe der transienten Absorptionstechnik mit einer zeitlichen Auflösung von unter 50 fs und spektral breitbandiger Abfrage charakterisiert. Die globale Datenanalyse ergab hierbei, dass in Lösung zwei unterschiedliche Merocyaninisomere mit unterschiedlichen Lebensdauern der angeregten Zustände vorliegen. Diese Isomere unterscheiden sich in der cis/trans-Anordnung der letzten Bindung der Methinbrücke. Hierbei stellt das Isomer mit trans-trans-trans Konfiguration (TTT) die Minderheit dar, während die Mehrzahl der Moleküle eine cis-Stellung im dritten Diederwinkel aufweist (TTC). Eine charakteristische spektrale Bande, welche nach langen Pump-Probe-Verzögerungszeiten detektiert wurde, konnte der einfachgerichteten cis->trans Photoisomerisierungsreaktion der TTC Form zum TTT zugeordnet werden. Die Quantenausbeute dieser Reaktion wurde auf (18+-4) % bestimmt. Darüber hinaus wurden stark ausgeprägte Oszillationen eines kohärenten Vibrationswellenpakets beobachtet wobei geschlussfolgert wurde, dass diese Signaturen mit der Entstehung des Reaktionsprodukts zusammenhängen. Die Technik der kohärenten zweidimensionalen elektronischen Spektroskopie wurde auf Basis einer partiell kollinearen Pump-Probe Strahlgeometrie und in Kombination mit einem Femtosekundenpulsformer erfolgreich implementiert. Dabei ermöglichte die Verwendung eines Weißlichtkontinuums als Abfragepuls auch die Erfassung von Beiträgen, welche weit entfernt von der Diagonalen lokalisiert sind und sich über den gesamten sichtbaren Spektralbereich erstrecken. Durch eine geeignete Anpassung der relativen Phase zwischen den ersten beiden Laserpulsen mit Hilfe des Pulsformers konnte das Prinzip des „phase cyclings" umgesetzt werden. Darüber hinaus wurde demonstriert, dass die Messung im sogenannten „rotating frame" durchgeführt werden kann wobei die Oszillationsfrequenzen, welche während der Kohärenzzeit detektiert werden, zu niedrigeren Werten verschoben werden. Es wurde gezeigt, dass mit diesen Konzepten das erwünschte hintergrundfreie Photonenecho extrahiert und darüber hinaus das Signal mit einer deutlich niedrigeren Anzahl an notwendigen Datenpunkten erfasst werden kann. Um unsere Idee der multidimensionalen Spektroskopie an photoreaktiven Systemen in die Praxis umzusetzen, wurde anschließend die zwei- und dreidimensionale Spektroskopie dritter Ordnung zur eingehenden Untersuchung eines photoreaktiven Prozesses angewandt, wobei die Photoisomerisierungsreaktion von 6-nitro BIPS als Modellreaktion herangezogen wurde. Die gemessenen zweidimensionalen Spektren offenbarten unmittelbar die cis->trans Photoisomerisierung nach längeren Populationszeiten. Das dreidimensionale Spektrum dritter Ordnung konnte generiert werden, indem ein großer Datensatz an zweidimensionalen Spektren für kleine Populationszeiten aufgenommen und anschließend die Fouriertransformation entlang der Populationszeitachse bestimmt wurde. Die Neuartigkeit dieses Verfahrens besteht darin, dass eine dritte Achse eingeführt wird, welche mit der Schwingungsfrequenz des molekularen Systems assoziiert ist. Dadurch konnte die Entstehung des Reaktionsprodukts eindeutig belegt werden. Außerdem konnte so gezeigt werden, dass es innerhalb von 200 fs im ersten angeregten Singulettzustand erzeugt wird. Somit vermag diese Methode einerseits die photochemischen Beziehungen zwischen unterschiedlichen reaktiven Spezies auf intuitive Art und Weise zu visualisieren und andererseits ermöglicht sie die Enthüllung derjenigen Normalschwingungen, welche Edukt und Produkt miteinander verbinden. Derartige Schlussfolgerungen können nicht mit konventionellen Techniken dritter Ordnung, wie beispielsweise der transienten Absorption, gezogen werden, da sie nicht in der Lage sind die vollständige Antwortfunktion dritter Ordnung, sondern lediglich ein Teil davon, zu erfassen. Durch Abgleich der experimentellen Daten mit den Resultaten von umfassenden quantenchemischen Berechnungen unserer Kollaborationspartner der Gruppe von Prof. B. Engels aus dem Fachbereich der theoretischen Chemie der Universität Würzburg, konnten der Reaktionsmechanismus sowie die Rolle der beobachteten Vibrationsmoden entschlüsselt werden. Dabei konnten spezifische berechnete Normalschwingungen den experimentell beobachteten Frequenzen zugeordnet und die Potentialhyperflächen des elektronischen Grundzustands und des ersten angeregten Zustands bestimmt werden. Die Technik, welche in diesem Kapitel eingesetzt wurde, ist universell und zur zeitaufgelösten Untersuchung einer großen Zahl an chemischen Reaktionsnetzwerken anwendbar. Im ersten Teil von Kap. 5 wurden die Reaktionspfade der sehr ähnlichen Verbindung 6,8-dinitro BIPS nach S1-Anregung mittels kohärenter zweidimensionaler Spektroskopie untersucht. Dabei zeigten sich zahlreiche Unterschiede zu den photochemischen Eigenschaften von 6-nitro BIPS. Auf Basis der 2D Spektren konnte für diese Verbindung die cis-trans Isomerisierung zwischen den beiden Merocyaninisomeren als bedeutender Reaktionspfad ausgeschlossen werden. Zur Erforschung der Dynamik nach der Wiederanregung in höher angeregte elektronische Zustände, wurde die Anrege-Wiederanrege-Abfrage Spektroskopie implementiert, wobei die Bildung einer neuen Spezies – des Radikalkations – beobachtet wurde. Zur Identifikation des Vorläuferisomers wurde die Technik der zweidimensionalen Spektroskopie mit ausgelöster Umwandlung ("triggered-exchange 2D", TE2D) erstmals mit elektronischen Anregungen im Sichtbaren realisiert. Bisher stand diese Technik ausschließlich im infraroten Spektralbereich für Vibrationsübergänge zur Verfügung. Diese Methode vereinigt die Eigenschaften der Anrege-Wiederanrege-Abfrage Technik mit dem Leistungsvermögen der kohärenten zweidimensionalen Spektroskopie. Sie stellt die Korrelation zwischen der Absorptionsfrequenz einer reaktiven molekularen Spezies mit der Emissionssignatur eines Produkts dar, welches von der ersten Spezies durch die zusätzliche Absorption eines weiteren Photons erzeugt wurde. Durch die Zuhilfenahme dieser Methode konnte eindeutig gezeigt werden, dass nur das TTC Isomer zum Radikalkation reagiert, weshalb es somit als Vorläuferisomer der Reaktion aufgefasst werde kann. Die elektronische TE2D Spektroskopie stellt somit eine weitere verbesserte Technologie in der zeitaufgelösten Spektroskopie mit möglichen Anwendungen bei der Untersuchung von mehrstufigen Photoreaktionen und höher angeregten elektronischen Zuständen dar. Während in den beiden vorhergehenden Kapiteln Experimente dritter und fünfter Ordnung unter Vernachlässigung des vektoriellen Charakters von Licht-Materie-Wechselwirkungen diskutiert wurden, befasste sich Kap. 6 mit einem neuartigen theoretischen Formalismus, welcher die Beschreibung von Lichtfeldern ermöglicht, welche für polarisationssensitive Nichtlinearitäten höherer Ordnung optimiert sind. Dieser Formalismus basiert auf der von Neumann Zeit-Frequenz Darstellung von geformten Laserpulsen, welche es gestattet, Mehrfachpulssequenzen auf einem diskreten Zeit-Frequenz Gitter zu definieren. Somit kann nicht nur der zeitliche Abstand zwischen den Teilpulsen eingestellt, sondern auch die Zentralfrequenz derart angepasst werden, dass sie den experimentellen Ansprüchen gerecht wird. Diese Methode wurde für die Beschreibung von Pulsformen mit einem zeitabhängigen Polarisationsprofil verallgemeinert. Es wurde gezeigt, dass mit Hilfe dieser Darstellung die Elliptizität, der Orientierungswinkel, die relative Phase und Intensität der Polarisationsellipse, sowie die Zeit-Frequenz Position jedes einzelnen Teilpulses explizit kontrolliert werden können. Die Genauigkeit der Transformationen vom Fourier- in den von Neumann Raum und wieder zurück wurde demonstriert. Überdies wurde festgestellt, dass im Falle von deutlich getrennten Teilpulsen die von Neumann Parameter exakt mit den konventionellen Polarisationsparametern im Zeitraum übereinstimmen. Eine der möglichen zukünftigen Anwendungen dieser Methode ist die polarisationssensitive multidimensionale Spektroskopie, mit deren Hilfe verborgene Cross Peaks durch die Definition der Pulssequenz in der von Neumann Darstellung unter Verwendung geeigneter Polarisationsabfolgen isoliert werden können. Dieser Formalismus könnte außerdem bei Quantenkontrollexperimenten Anwendung finden, bei denen die Polarisation des Lichtfelds der entscheidende Kontrollparameter darstellt. Diese Dissertation fasst unsere Bemühungen zusammen, das Feld der Femtochemie auch für das Konzept der multidimensionalen Spektroskopie zu eröffnen. Durch die Verwendung der Femtosekundenpulsformung, einer zeitlichen Auflösung von unter 50 fs, spektral breitbandiger Abfrage, Nichtlinearitäten höherer Ordnung sowie das Ausnutzen neuartiger Beschreibungen von Laserpulsen könnten die präsentierten Methoden Anreize für weitere zukünftige Entwicklungen auf diesem Forschungsgebiet schaffen. KW - Ultrakurzzeitspektroskopie KW - femtosecond spectroscopy KW - multidimensional spectroscopy KW - ultrafast photochemistry KW - quantum control KW - Femtosekundenspektroskopie KW - Multidimensionale Spektroskopie KW - Ultraschnelle Photochemie KW - Quantenkontrolle Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-98993 ER -