TY - JOUR A1 - Tinajero-Trejo, Mariana A1 - Rana, Namrata A1 - Nagel, Christoph A1 - Jesse, Helen E. A1 - Smith, Thomas W. A1 - Wareham, Lauren K. A1 - Hippler, Michael A1 - Schatzschneider, Ulrich A1 - Poole, Robert K. T1 - Antimicrobial Activity of the Manganese Photoactivated Carbon Monoxide-Releasing Molecule [Mn(CO)\(_3\)(tpa-kappa\(^3\)N)]\(^+\) Against a Pathogenic Escherichia coli that Causes Urinary Infections JF - Antioxidants & Redox Signaling N2 - Aims: We set out to investigate the antibacterial activity of a new Mn-based photoactivated carbon monoxide-releasing molecule (PhotoCORM, [Mn(CO)\(_3\)(tpa-kappa\(^3\)N)]\(^+\)) against an antibiotic-resistant uropathogenic strain (EC958) of Escherichia coli. Results: Activated PhotoCORM inhibits growth and decreases viability of E. coli EC958, but non-illuminated carbon monoxide-releasing molecule (CORM) is without effect. NADH-supported respiration rates are significantly decreased by activated PhotoCORM, mimicking the effect of dissolved CO gas. CO from the PhotoCORM binds to intracellular targets, namely respiratory oxidases in strain EC958 and a bacterial globin heterologously expressed in strain K-12. However, unlike previously characterized CORMs, the PhotoCORM is not significantly accumulated in cells, as deduced from the cellular manganese content. Activated PhotoCORM reacts avidly with hydrogen peroxide producing hydroxyl radicals; the observed peroxide-enhanced toxicity of the PhotoCORM is ameliorated by thiourea. The PhotoCORM also potentiates the effect of the antibiotic, doxycycline. Innovation: The present work investigates for the first time the antimicrobial activity of a light-activated PhotoCORM against an antibiotic-resistant pathogen. A comprehensive study of the effects of the PhotoCORM and its derivative molecules upon illumination is performed and mechanisms of toxicity of the activated PhotoCORM are investigated. Conclusion: The PhotoCORM allows a site-specific and time-controlled release of CO in bacterial cultures and has the potential to provide much needed information on the generality of CORM activities in biology. Understanding the mechanism(s) of activated PhotoCORM toxicity will be key in exploring the potential of this and similar compounds as antimicrobial agents, perhaps in combinatorial therapies with other agents. KW - intracellular hydrogen-peroxide KW - campylobacter-jejuni KW - oxygen-metabolism KW - deficient mutant KW - oxidative stress KW - aqueous-solution KW - metal caponyls KW - RU(CO)(3)CL(GLYCINATE) KW - bacteria KW - enzyme Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-188910 VL - 24 IS - 14 ER - TY - THES A1 - Kobelt, Claudia T1 - Beiträge zur Chemie des höherkoordinierten Silliciums: Synthese, Struktur und Eigenschaften neuer höherkoordinierter Silicium(II)- und Silicium(IV)-Komplexe T1 - Contributions to the Chemistry of higher-coordinate Silicon: Synthesis, Structure and Properties of novel higher-coordinate Silicon(II)- and Silicon(IV)-complexes N2 - Die vorliegende Arbeit stellt einen Beitrag zur Chemie des höherkoordinierten Siliciums dar. Dabei standen die Synthese und Charakterisierung neuer neutraler tetra-, penta- und hexakoordinierter Silicium(IV)-Komplexe sowie die Synthese, Charakterisierung und Reaktivität eines neuartigen Donor-stabilisierten Silylens im Vordergrund. Im Rahmen dieser Arbeit wurden das Silan 16, die neutralen tetrakoordinierten Silicium(IV)-Komplexe 36, 37', 38'·C6H5CH3, 40'∙C6H5CH3, 41 und 42, die neutralen pentakoordinierten Silicium(IV)-Komplexe 2‒8, 10·0.5C6H5CH3, 11, 12, 15, 17‒20 und 39', die neutralen hexakoordinierten Silicium(IV)-Komplexe 21‒23, das Donor-stabilisierte trikoordinierte Silylen 25, der neutrale tetrakoordinierte Silicium(II)-Komplex 35 sowie das Lithiumamidinat 1·2Et2O erstmalig dargestellt und charakterisiert. Die Charakterisierung dieser Verbindungen erfolgte durch NMR-Spektroskopie in Lösung und im Festkörper, durch Kristallstrukturanalyse sowie durch Elementaranalyse. Die Synthesen und Eigenschaften dieser Verbindungen können wie folgt zusammengefasst werden: Synthese und Charakterisierung neutraler pentakoordinierter Silicium(IV)-Komplexe Ausgehend von entsprechenden Silicium(IV)-haltigen Vorstufen wurden die neutralen pentakoordinierten Silicium(IV)-Komplexe 2‒8, 10·0.5C6H5CH3, 11, 12, 15 und 17‒20 dargestellt. So konnten die Verbindungen 2, 5, 7 und 8 durch Umsetzung der entsprechemden Trichlorsilane bzw. Tetrachlorsilan mit 1 in Diethylether erhalten werden. Diese Verbindungen besitzen an den beiden Stickstoff-Atomen des Amidinato-Liganden jeweils eine sterisch sehr anspruchsvolle Diisopropylphenyl-Einheit (Dipp), welche den Einbau eines zweiten Amidinato-Liganden nicht zulässt und sich so ausschließlich pentakoordinierte Silicium(IV)-Komplexe bilden. Durch Weiterreaktion von 2 und 5 mit Lithiumdimethyl- bzw. Kaliumbis(trimethylsilyl)amid entstanden die Komplexe 3, 4 und 6. Die Si-Koordinationspolyeder von 2‒8 im Kristall entsprechen denen von stark verzerrten trigonalen Bipyramiden, wobei die Stickstoff-Atome des Amidinato-Liganden eine axiale bzw. äquatoriale Position besetzen. Die zweite axiale Position wird jeweils von einem Chloro-Liganden eingenommen. Die genannten Verbindungen besitzen alle einen stark gespannten viergliedrigen SiN2C-Ring mit mehr oder weniger stark ausgeprägter Elektronendelokalisation innerhalb de N‒C‒N-Fragmentes, welcher durch den Amidinato-Liganden mit dem Si-Koordinationszentrum gebildet wird und hauptverantwortlich für die starke Verzerrung der Si-Koordinationspolyeder ist. Die Verbindungen 10·0.5C6H5CH3, 11 und 12 entstanden durch Umsetzung der entsprechenden Trichlorsilane mit 9 und zwei Moläquivalenten Triethylamin in Tetrahydrofuran. Durch Weiterreaktion von 11 mit Benzolthiol bzw. Benzolselenol und Triethylamin in Tetrahydrofuran wurden die Komplexe 18 und 19 gebildet. Die Verbindungen 15 und 20 entstanden mittels einer Transsilylierungsreaktion von 14 mit Azidotrimethylsilan bzw. 11 mit Trimethylsilyl(phenyl)tellurid in Tetrahydrofuran. Verbindung 17 wurde durch Umsetzung von Cl2Si(OPh)Me (16) mit 9 und zwei Moläquivalenten Triethylamin in Tetrahydrofuran erhalten. Die Si-Koordinationspolyeder von 10·0.5C6H5CH3, 11, 12, 15 und 17‒20 im Kristall entsprechen denen von stark verzerrten trigonalen Bipyramiden, wobei der tridentate N,N',S- bzw. N,N',O-Ligand zwei Fünfringe mit dem Si-Koordinationszentrum ausbildet. Das Pyridin-Stickstoff- und das Schwefel-Atom des N,N',S-Liganden (bzw. Sauerstoff-Atom des N,N',O-Liganden) besetzen die axialen Bindungspositionen. Synthese und Charakterisierung neutraler hexakoordinierter Silicium(IV)-Komplexe Die neutralen hexakoordinierten Silicium(IV)-Komplexe 21 und 22 wurden durch Umsetzung von Trichlorsilan mit zwei Moläquivalenten des entsprechenden Lithiumamidinats in Diethylether dargestellt. Die Si-Koordinationspolyeder von 21 und 22 im Kristall entsprechen denen von stark verzerrten Oktaedern, wobei jeweils eines der beiden Stickstoff-Atome der zwei Amidinato-Liganden trans zueinander angeordnet sind. Die beiden anderen Stickstoff-Atome der Amidinato-Liganden befinden sich in trans-Position zum Chloro- bzw. Hydrido-Liganden. Der neutrale hexakoordinierte Silicium(IV)-Komplex 23 wurde durch Umsetzung des pentakoordinierten Silicium(IV)-Komplexes 11 mit 8-Hydroxychinolin und Triethylamin in Tetrahydrofuran dargestellt. Das Si-Koordinationspolyeder von 23 im Kristall entspricht dem eines stark verzerrten Oktaeders, wobei der dreizähnige N,N',S-Ligand eine mer-Anordnung einnimmt und das Chinolin-Stickstoff-Atom und das Kohlenstoff-Atom des Methyl-Liganden trans zueinander stehen. Mit den hier beschriebenen Synthesen konnte gezeigt werden, dass pentakoordinierte Chlorosilicium(IV)-Komplexe ‒ wie beispielsweise 2, 5 oder 11 ‒ sehr gut geeignete Ausgangsstoffe für die Darstellung neuartiger penta- und hexakoordinierter Silicium(IV)-Verbindungen darstellen. Synthese und Charakterisierung eines neuartigen Donor-stabilisierten Silylens Nachdem alle Versuche, ein entsprechendes Donor-stabilisiertes Silylen durch Basen-induzierte reduktive HCl-Eliminierung der penta- bzw. hexakoordinierten Chlorohydridosilicium(IV)-Komplexe 2‒4, 21 und 22 darzustellen, fehlschlugen, wurde daraufhin der pentakoordinierte Dichlorosilicium(IV)-Komplex 6 mit zwei Moläquivalenten elementarem Kalium in Tetrahydrofuran erfolgreich zum trikoordinierten Donor-stabilisierten Silylen 25 umgesetzt. Das Si-Koordinationspolyeder von 25 entspricht dem eines stark verzerrten (Pseudo)tetraeders, wobei die drei Bindungspositionen von den Stickstoff-Atomen und eine vierte von dem freien Elektronenpaar eingenommen werden. Die starke Verzerrung ist auf den stark gespannten viergliedrigen SiN2C-Ring des Komplexes zurückzuführen. Reaktivität des Donor-stabilisierten Silylens 25 Der trikoordinierte Silicium(II)-Komplex 25 reagierte mit Eisenpentacarbonyl in Toluol im Sinne einer nukleophilen Substitutionsreaktion unter Ausbildung einer Si–Fe-Bindung zum neutralen tetrakoordinierten Silicium(II)-Komplex 35. Das Si-Koordinationspolyeder von 35 im Kristall entspricht dem eines stark verzerrten Tetraeders. Das Fe-Koordinationspolyeder entspricht dem einer stark verzerrten trigonalen Bipyramide, wobei der sterisch sehr anspruchsvolle Silylen-Ligand interessanterweise eine axiale Bindungsposition am Eisen-Koordinationszentrum einnimmt. Desweiteren wurde 25 mit den Aziden Me3SiN3, PhSCH2N3 und (PhO)2P(O)N3 in Toluol im Sinne einer oxidativen Addition unter Abspaltung von elementarem Stickstoff zu 36, 37' bzw. 38'·C6H5CH3 umgesetzt. Bemerkenswert ist, dass bei der Reaktion mit PhSCH2N3 zu 37' eine Umlagerungsreaktion stattfindet, wobei eine Si–S-Bindung geknüpft und ein Si–N=CH2-Fragment gebildet wird. Bei der Reaktion von 25 mit (PhO)2P(O)N3 zu 38'·C6H5CH3 wird ein Sauerstoff-verbrücktes Dimer gebildet, wodurch ein achtgliedriger Ring mit zwei Silicium(IV)-Zentren aufgebaut wird. Die Si-Koordinationspolyeder von 36, 37' und 38'·C6H5CH3 im Kristall entsprechen denen von stark verzerrten Tetraedern, wobei der Amidinato-Ligand nur in Verbindung 36 bidentat an das Silicium-Zentrum koordiniert ist, während für 37' und 38'·C6H5CH3 ein monodentater Koordinationsmodus beobachtet wird. Durch Umsetzung von 25 mit N2O, S, Se bzw. Te in Toluol entstanden ebenfalls im Sinne einer oxidativen Addition die tetra- bzw. pentakoodinierten Silicium(IV)-Komplexe 39', 40'·C6H5CH3, 41 und 42. Die Verbindungen 39' und 40'·C6H5CH3 sind Dimere der eigentlichen Zielverbindungen 39 und 40, wobei 40' bei höheren Temperaturen zu dem Monomer 40 dissoziiert, welches dann nach Abkühlen auf Raumtemperatur auch in Lösung stabil ist. Die Verbindungen 41 sowie 42 bilden jedoch ausschließlich Monomere. Die Si-Koordinationspolyeder von 39' im Kristall entsprechen dem einer stark verzerrten trigonalen Bipyramide, während die Si-Koordinationspolyeder von 40'·C6H5CH3, 41 und 42 denen eines stark verzerrten Tetraeders entsprechen. Dabei ist der Amidinato-Ligand in 39', 41 und 42 bidentat, in 40'·C6H5CH3 dagegen monodentat an das Silicium-Koordinationszentrum koordiniert ist. Mit den hier beschriebenen Synthesen konnte gezeigt werden, dass das Donor-stabilisierte Silylen 25 ein außergewöhnliches Reaktivitätsspektrum aufweist und damit ein sehr interessantes Synthesepotential zur Darstellung neuartiger Silicium(II)- und Silicium(IV)-Komplexe besitzt. N2 - This thesis deals with the chemistry of higher-coordinate silicon, with a special emphasis on the synthesis and characterization of novel neutral tetra-, penta- and hexacoordinate silicon(IV) compounds, as well as the synthesis, characterization, and reactivity studies of a novel donor-stabilized silylene. In the course of these studies, the silane 16, the neutral tetracoordinate silicon(IV) complexes 36, 37', 38'·C6H5CH3, 40'·C6H5CH3, 41, and 42, the neutral pentacoordinate silicon(IV) complexes 2‒8, 10·0.5C6H5CH3, 11, 12, 15, 17‒20, and 39', the neutral hexacoordinate silicon(IV) complexes 21‒23, the donor-stabilized tricoordinate silylene 25, the neutral tetracoordinate silicon(II) complex 35, and the lithium amidinate 1·2Et2O were synthesized and characterized for the first time. All of these compounds were characterized by NMR spectroscopy in the solid state and in solution, single-crystal X-ray diffraction, and elemental analyses. The syntheses and properties of these compounds can be summarized as follows: Synthesis and characterization of neutral pentacoordinate silicon(IV) complexes The neutral pentacoordinate silicon(IV) complexes 2‒8, 10·0.5C6H5CH3, 11, 12, 15 and 17‒20 were synthesized, starting from suitable silicon(IV) containing precursors. Compounds 2, 5, 7, and 8 were obtained by reaction of the respective trichlorosilanes or tetrachlorosilane with 1 in diethyl ether. These compounds contain a sterically demanding diisopropylphenyl unit (Dipp) at each of the two nitrogen atoms of the amidinato ligand, which prevents the introduction of a second amidinato ligand, and therefore only pentacoordinate silicon(IV) complexes were obtained. In a subsequent reaction of 2 and 5 with lithium dimethyl or potassium bis(trimethylsilyl) amide, the complexes 3, 4, and 6 were formed. The silicon coordination polyhedra of 2‒8 in the crystal are strongly distorted trigonal bipyramids, in which the nitrogen atoms of the amidinato ligand occupy an axial and an equatorial position, respectively. All these compounds contain a strongly strained four-membered SiN2C ring with a more or less distinct electron delocalization within the N–C–N fragment, which is built up by the amidinato ligand and the silicon coordination center, and which is primarily responsible for the strong distortion of the silicon coordination polyhedra. Complexes 10·0.5C6H5CH3, 11, and 12 were obtained by treatment of the respective trichlorosilanes with 9 and two molar equivalents of triethylamine in tetrahydrofuran. Subsequent reaction of 11 with benzenethiol and benzeneselenol, respectively, and triethylamine in tetrahydrofuran yielded the complexes 18 and 19. Compounds 15 and 20 were synthesized by a transsilylation reaction of 14 with azidotrimethylsilane in acetonitrile or 11 with phenyl trimethylsilyl telluride in tetrahydrofuran. Compound 17 was obtained by treatment of Cl2Si(OPh)Me (16) with 9 and two molar equivalents of triethylamine in tetrahydrofuran. The silicon coordination polyhedra of 10·0.5C6H5CH3, 11, 12, 15, and 17‒20 in the crystal are strongly distorted trigonal bipyramids, in which the tridentate N,N',S or N,N',O ligand forms two five-membered rings with the silicon coordination center. The pyridine nitrogen and sulfur atom of the N,N',S ligand (or the oxygen atom of the N,N',O ligand) occupy the two axial positions. Synthesis and characterization of neutral hexacoordinate silicon(IV) complexes The neutral hexacoordinate silicon(IV) complexes 21 and 22 were synthesized by treatment of trichlorosilane with two molar equivalents of the respective lithium amidinate in diethyl ether. The silicon coordination polyhedra of 21 and 22 in the crystal are strongly distorted octahedra, in which one of the two nitrogen atoms each of the two amidinato ligand are trans to each other. The two other nitrogen atoms of the amidinato ligands are in trans position to the chloro or hydrido ligand. The neutral hexacoordinate silicon(IV) complex 23 was obtained by treatment of the pentacoordinate silicon(IV) complex 11 with 8-hydroxychinoline and triethylamine in tetrahydrofuran. The silicon coordination polyhedron of 23 in the crystal is a strongly distorted octahedron, in which the tridentate N,N',S ligand forms a mer arrangement and the chinoline nitrogen atom and the carbon atom of the methyl ligand are trans to each other. With the syntheses described above, it could be demonstrated that pentacoordinate chlorosilicon(IV) complexes, such as 2, 5 or 11, are versatile precursors for the synthesis of novel penta- and hexacoordinate silicon(IV) compounds. Synthesis and characterization of a novel donor-stabilized silylene After all attempts to synthesize the respective donor-stabilized silylenes by base-induced reductive HCl elimination of the penta- and hexacoordinate silicon(IV) complexes 2‒4, 21, and 22 failed, the neutral pentacoordinate dichlorosilicon(IV) complex 6 was treated with two molar equivalents of elemental potassium in tetrahydrofuran to yield the tricoordinate donor-stabilized silylene 25 The silicon coordination polyhedron of 25 in the crystal is a strongly distorted (pseudo)tetrahedron, in which three binding positions are occupied by the nitrogen atoms and a fourth position by the lone pair. The strong distortion can be attributed to the strongly strained four-membered SiN2C ring of the complex. Reactivity of the donor-stabilized silylene 25 The tricoordinate silicon(II) complex 25 reacts with iron pentacarbonyl in toluene in terms of a nucleophilic substitution reaction to yield the neutral tetracoordinate silicon(II) complex 35 with an Si–Fe bond. The silicon coordination polyhedron of 35 in the crystal a strongly distorted tetrahedron. The iron coordination polyedron is a strongly distorted trigonal bipyramid, in which the sterically demanding silylene ligand occupies an axial position. Furthermore, compound 25 was treated with the azides Me3SiN3, PhSCH2N3 and (PhO)2P(O)N3 in toluene in terms of an oxidatve addition reaction, under elimination of elemental nitrogen, to yield 36, 37', and 38'·C6H5CH3, respectively. Remarkably, a rearrangement takes place in the reaction with PhSCH2N3 to afford compound 37', which contains an Si–SPh and Si–N=CH2 fragment. The reaction of 25 with (PhO)2P(O)N3 leads to the oxygen-bridged dimer 38'·C6H5CH3, which contains an eight-membered ring with two silicon(IV) centers. The silicon coordination polyhedra of 36, 37', and 38'·C6H5CH3 in the crystal are strongly distorted tetrahedra. In compounds 37' and 38'·C6H5CH3, the amidinato ligand binds in a monodentate fashion, whereas a bidentate coordination mode was observed for 36. Treatment of 25 with N2O, S, Se, or Te in toluene leads to respective tetra- and pentacoordinate silicon(IV) complexes 39', 40'·C6H5CH3, 41, and 42, also in terms of oxidative addition reactions. Compounds 39' and 40'·C6H5CH3 are dimers of the monomeric target compounds 39 and 40. Upon heating, however, dimer 40' dissociates to the monomer 40, which upon cooling to room temperature is stable in solution. Compounds 41 and 42 exist only as monomers. The silicon coordination polyhedron of 39' in the crystal is a strongly distorted trigonal bipyramid, whereas the silicon coordination polyhedra of 40'·C6H5CH3, 41, and 42 are strongly distorted tetrahedra. In compounds 39', 41, and 42, the amidinato ligand binds in a bidentate fashion, whereas a monodentate coordination mode was observed for40'·C6H5CH3. With the syntheses discribed above, it could be demonstrated that the donor-stabilized silylene 25 shows remarkable reactivity profile and a very interesting synthetic potential for the preparation of novel silicon(II) and silicon(IV) complexes. KW - Hypervalentes Molekül KW - Silylen KW - Chelatbildner KW - höherkoordiniertes Silicium KW - Donor-stabilisiertes Silylen KW - Siliciumkomplexe KW - Chelat-Liganden Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131439 ER - TY - THES A1 - Macha, Bret B. T1 - Boron-Containing Aromatics as Communicating and Communicative Units in π-Conjugated Systems T1 - Borhaltige Aromaten als Kommunikations-vermittelnde Einheiten in π-konjugierten Systemen N2 - Project Borylene A new borylene ligand ({BN(SiMe\(_3\))(t-Bu)}) has been successfully synthesized bound in a terminal manner to base metal scaffolds of the type [M(CO)\(_5\)] (M = Cr, Mo, and W), yielding complexes [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), [(OC)\(_5\)Mo{BN(SiMe\(_3\))(t- Bu)}] (20), and [(OC)\(_5\)W{BN(SiMe\(_3\))(t-Bu)}] (21) (Figure 5-1). Synthesis of complexes 19, 20, and 21 was accomplished by double salt elimination reactions of Na\(_2\)[M(CO)\(_5\)] (M = Cr (11), Mo (1), and W (12)) with the dihaloborane Br\(_2\)BN(SiMe\(_3\))(t-Bu) (18). This new “first generation” unsymmetrical borylene ligand is closely akin to the bis(trimethylsilyl)aminoborylene ligand and has been shown to display similar structural characteristics and reactivity. The unsymmetrical borylene ligand {BN((SiMe\(_3\))(t-Bu)} does display some individual characteristics of note and has experimentally been shown to undergo photolytic transfer to transition metal scaffolds in a more rapid manner, and appears to be a more reactive borylene ligand, than the previously published symmetrical {BN(SiMe\(_3\))\(_2\)} ligand, based on NMR and IR spectroscopic evidence. Photolytic transfer reactions with this new borylene ligand ({BN((SiMe\(_3\))(t-Bu)}) were conducted with other metal scaffolds, resulting in either complete borylene transfer or partial transfer to form bridging borylene ligand interactions between the two transition metals. The unsymmetrical ligand’s coordination to early transition metals (up to Group 6) indicates a preference for a terminal coordination motif while bound to these highly Lewis acidic species. The ligand appears to form more energetically stable bridging coordination modes when bound to transition metals with high Lewis basicity (beyond Group 9) and has been witnessed to transfer to transition metal scaffolds in a terminal manner and subsequently rearrange in order to achieve a more energetically stable bridging final state. Figure 5-2 lists the four different transfer reactions conducted between the chromium borylene species [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) and the transition metal complexes [(η\(^5\)-C\(_5\)H\(_5\))V(CO)\(_4\)] (51), [(η\(^5\)-C\(_5\)Me\(_5\))Ir(CO)\(_2\)] (56), [(η\(^5\)-C\(_5\)H\(_4\)Me)Co(CO)\(_2\)] (59), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\){μ-(CO)\(_2\)}] (53). These reactions successfully yielded the new “second generation” borylene complexes [(η\(^5\)-C\(_5\)H\(_5\))(OC)\(_3\)V{BN(SiMe\(_3\))(t-Bu)}] (55), [(η\(^5\)-C\(_5\)Me\(_5\))Ir{BN(SiMe\(_3\))(t-Bu)}\(_2\)] (58), [{(η\(^5\)-C\(_5\)H\(_4\)Me)Co}\(_2\)(μ-CO)\(_2\){μ- BN(SiMe\(_3\))(t-Bu)}] (61), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\)(μ-CO){μ-BN(SiMe\(_3\))(t-Bu)}] (62), respectively. Analysis of the accumulated data for all of the terminal borylene species discussed in this section, particularly bond distances, infrared spectroscopy, and \(^{11}\)B{\(^1\)H} NMR spectroscopic data, has been performed, and a trend in the data has led to the following conclusions: [1] NMR spectroscopic data for the \(^{11}\)B{\(^1\)H} boron and \(^{13}\)C{\(^1\)H} carbonyl environments of the first generation borylene species ([(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21))) all show progressive up-field shifting as the Group 6 metal becomes heavier (Cr (19) to Mo (20) to W (21)), indicating maximum deshielding for these nuclei in the [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) complex. [2] The boron-metal-trans-carbon (B-M-C\(_{trans}\)) axes of the first generation borylene complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Mo (20), and W (21)) are not completely linear, preventing direct IR spectroscopic comparison. The chromium analog [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), however, is essentially linear and displays the expected three carbonyl IR stretching frequencies, all at higher energy than those of the chromium bis(trimethylsilyl)aminoborylene complex [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13), indicating that the ({BN(SiMe\(_3\))(t-Bu)}) ligand is either a stronger σ-donor or a poorer π-acceptor compared to the chromium metal center. [3] In transfer reactions, the {BN(SiMe\(_3\))(t-Bu)} fragment appears to be more stable as a terminal ligand when bound to more Lewis acidic first row transition metals and appears to prefer coordination in a bridging motif when coordinated to more Lewis basic first row transition metals. Project Borirene The synthesis of the first platinum bis(borirene) complexes are presented along with findings from structural and electronic examination of the role of platinum in allowing increased coplanarity and conjugation of twin borirene systems. This series of trans-platinum-linked bis(borirene) complexes (119/120, 122/123, and 125/126) all show coplanarity in the twin ring systems and stand as the first verified structural representations of two coplanar borirene systems across a linking unit. The role of a platinum atom in mediating communication between chromophoric ligands can be generalized by an expected bathochromic (red) shift in the absorption spectrum due to an increase in the electronic delocalization between the formerly independent aromatic systems when compared to the platinum mono-σ-borirenyl systems. The trans-platinum bis(borirene) scaffold serves as a simplified monomeric system that allows not only study of the effects of transition metals in mitigating electronic conjugation, but also the tunability of the overall photophysical profile of the system by exocyclic augmentation of the three-membered aromatic ring. A series of trans-platinum bis(alkynyl) complexes were prepared (Figure 5-3) to serve as stable platforms to transfer terminal borylene ligands {BN(SiMe\(_3\))\(_2\)} onto 95, 102, 106, and 63. Mixing of cis-[PtCl\(_2\)(PEt\(_3\))\(_2\)] (93) with two equivalents of corresponding alkynes in diethylamine solutions successfully yielded trans-[Pt(C≡C-Ph)\(_2\)(PEt\(_3\))\(_2\)] (95), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)OMe)\(_2\)(PEt\(_3\))\(_2\)] (102), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)CF\(_3\))\(_2\)(PEt\(_3\))\(_2\)](106), and trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) through salt elimination reactions. Three of the trans-platinum bis(alkynyl) complexes (95, 102, and 106) successfully yielded trans-platinum bis(borirenyl) complexes 119/120, 122/123, and 125/126 through photolytic transfer of two equivalents of the terminal borylene ligand {BN(SiMe\(_3\))\(_2\)} from [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) (Figure 5-4). Attempted borylene transfer reactions to the trans-platinum bis(alkynyl) complex trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) failed due to the complex’s photoinstability. Although a host of other variants of platinum alkynyl species were prepared and attempted, these three were the only ones that successfully yielded trans-platinum bis(borirenyl) units. Attempts were also made to create a cis variant for direct UV-vis comparison to the trans-platinum bis(borirenyl) variants, however, these attempts were also not successful. Gladysz-type platinum end-capped alkynyl species were also synthesized to serve as transfer platforms for borirene synthesis in sequential order, however, these species were also shown to not be photolytically stable. A host of new monoborirenes: Ph-(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph (148), trans- [PtCl{(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph}(PEt\(_3\))\(_2\)] (149), and [(η\(^5\)-C\(_5\)Me\(_5\))(OC)\(_2\)Fe(μ- {BN(SiMe\(_3\))(t-Bu)}C=C)Ph] (150) were synthesized by photo- and thermolytic transfer of the unsymmetrical {BN(SiMe\(_3\))(t-Bu)} ligand from the complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21)) to organic and organometallic alkynyl species to verify that the borylene complexes all display similar reactivity to the symmetrical terminal borylenes of the type [(OC)\(_5\)M{BN(SiMe\(_3\))\(_2\)}] (M = Cr (13), Mo (14), and W (15)). These monoborirenes are all found to be oils when in their pure states and X-ray structural determination was impossible for these species. Project Boratabenzene The bis(boratabenzene) complex [{(η\(^5\)-C\(_5\)H\(_5\))Co}\(_2\){μ:η\(^6\),η\(^6\)-(BC\(_5\)H\(_5\))\(_2\)}] (189) was successfully prepared by treatment of tetrabromodiborane (65) with six equivalents of cobaltocene (176) in a unique reaction that utilized cobaltocene as both a reagent and reductant (Figure 5-5). The bimetallic transition metal complex features a new bridging bis(boratabenzene) ligand linked through a boron-boron single bond that can manifest delocalization of electron density by providing an accessible LUMO orbital for π-communication between the cobalt centers and heteroaromatic rings. This dianionic diboron ligand was shown to facilitate electronic coupling between the cobalt metal sites, as evidenced by the potential separations between successive single-electron redox events in the cyclic voltammogram. Four formal redox potentials for complex 189 were found: E\(_{1/2}\)(1) = −0.84 V, E\(_{1/2}\)(2) = −0.94 V, E\(_{1/2}\)(3) = −2.09 V, and E\(_{1/2}\)(4) = −2.36 V (relative to the Fc/Fc+ couple) (Figure 5-6). These potentials correlate to two closely-spaced oxidation waves and two well-resolved reduction waves ([(189)]\(^{0/+1}\), [(189)]\(^{+1/+2}\), [(189)]\(^{0/–1}\), and [(189)]\(^{–1/–2}\) redox couples, respectively). The extent of metal-metal communication was found to be relative to the charge of the metal atoms, with the negative charge being more efficiently delocalized across the bis(boratabenzene) unit (class II Robin-Day system). Magnetic studies indicate that the Co(II) ions are weakly antiferromagnetically coupled across the B-B bridge. While reduction of the bis(boratabenzene) system resulted in decomposition of the complex, oxidation of the system by one- and two-electron steps resulted in isolable stable monocationic (194) and dicationic (195) forms of the bis(boratabenzene) complex (Figure 5-7). Study of these systems verified the results of the cyclic voltammetry studies performed on the neutral species. These species are unfortunately not stable in acetonitrile or nitromethane solutions, which until this point are the only solvents that have been observed to dissolve the cationic species. Unfortunately, this instability in solution complicates reactivity studies of these cationic complexes. Finally, reactivity studies were performed on the neutral bis(boratabenzene) complex 189 in which the compound was tested for: (A) cleavage of the boratabenzene (cyclo-BC\(_5\)H\(_5\)) ring from the cobalt center, and (B) oxidative addition of the B-B bond to a transition metal scaffold to attempt synthesis of the first ever L\(_x\)M-η\(^1\)-(BC\(_5\)H\(_5\)) complex. Both of these reactivity studies, however, proved unsuccessful and typically witnessed decomposition of the bis(boratabenzene) complex or no reactivity. After repeated attempts of these reactions, no oxidative addition of the bis(boratabenzene) system could be confirmed. N2 - Projekt: Borylene Ein neuer Borylen-Ligand ({BN(SiMe\(_3\))(t-Bu)}) konnte dargestellt werden, der terminal an Metallfragmente der Form [M(CO)\(_5\)] (M = Cr, Mo, und W) bindet. Die Komplexe [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), [(OC)\(_5\)Mo{BN(SiMe\(_3\))(t- Bu)}] (20), und [(OC)\(_5\)W{BN(SiMe\(_3\))(t-Bu)}] (21) konnten durch doppelte Salzeliminierung von Na\(_2\)[M(CO)\(_5\)] (M = Cr (11), Mo (1), und W (12)) mit dem Dihalogenboran Br\(_2\)BN(SiMe\(_3\))(t-Bu) (18) erfolgreich dargestellt werden (Abbildung 6-1). Der neue, unsymmetrische Borylen-Ligand der “ersten Generation” ist eng verwandt mit dem Bis(trimethylsilyl)aminoborylen-Liganden, zu dem er, wie gezeigt werden konnte, ähnliche Strukturmerkmale und Reaktivitäten aufweist. Der unsymmetrische Borylen-Ligand {BN((SiMe\(_3\))(t-Bu)} zeigt jedoch auch einige Besonderheiten. So verläuft der photolytische Transfer auf Übergangsmetallfragmente im Vergleich zum symmetrischen {BN(SiMe\(_3\))\(_2\)}-Liganden schneller, was ihn auf der Grundlage von NMR- und IR-spektroskopischen Daten zu einem reaktiveren Borylen macht. Photolytische Transferreaktionen des neuen Borylens ({BN((SiMe\(_3\))(t-Bu)}) mit verschiedenen Metallkomplexen verlaufen entweder unter vollständigem oder teilweisem Transfer zu verbrückenden Borylen-Komplexen. Im Falle von Lewis-aciden, frühen Übergangsmetallkomplexen (bis zur Gruppe 6) wird eine terminale Koordination bevorzugt. Bei Lewis-basischen Übergangsmetallen (jenseits der Gruppe 9) hingegen scheint der verbrückende Koordinationsmodus energetisch bevorzugt zu sein. Es wurde beobachtet, dass bei Transferreaktionen anfänglich terminale Borylen-Komplexe gebildet werden, die sich in Komplexe mit verbrückenden Borylen-Liganden umlagern. Abbildung 6-2 gibt eine Übersicht über die durchgeführten Transferreaktionen zwischen der Chromborylen-Spezies [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) und den Übergangsmetallkomplexen [(η\(^5\)-C\(_5\)H\(_5\))V(CO)\(_4\)] (51), [(η\(^5\)-C\(_5\)Me\(_5\))Ir(CO)\(_2\)] (56), [(η\(^5\)-C\(_5\)H\(_4\)Me)Co(CO)\(_2\)] (59), und [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\){μ-(CO)\(_2\)}] (53). Bei diesen Umsetzungen konnten die Borylen-Komplexe der “zweiten Generation” [(η\(^5\)-C\(_5\)H\(_5\))(OC)\(_3\)V{BN(SiMe\(_3\))(t-Bu)}] (55), [(η\(^5\)-C\(_5\)Me\(_5\))Ir{BN(SiMe\(_3\))(t-Bu)}\(_2\)] (58), [{(η\(^5\)-C\(_5\)H\(_4\)Me)Co}\(_2\)(μ-CO)\(_2\){μ- BN(SiMe\(_3\))(t-Bu)}] (61), und [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\)(μ-CO){μ-BN(SiMe\(_3\))(t-Bu)}] (62) erfolgreich erhalten werden. Eine Analyse der gesammelten spektroskopischen (NMR, IR) und strukturellen Daten erlaubt folgende Schlussfolgerungen für die terminalen Borylen-Komplexe: [1] Die NMR-spektroskopischen Daten für die Gruppe-6-Metall-Komplexe der “ersten Generation” ([(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), und W (21)) zeigen, dass die \(^{11}\)B{\(^1\)H}- und \(^{13}\)C{\(^1\)H}-NMR Signale für die Carbonyle bei Gang zu den schwereren Homologen zu höherem Feld verschoben sind. Daraus resultiert die größte Entschirmung der Kerne für den Komplex [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19). [2] Die Bor-Metall-trans-Kohlenstoff-Achse (B-M-C\(_{trans}\)) in den Borylen-Komplexen der “ersten Generation” [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Mo (20) und W (21)) ist nicht linear, was einen direkten Vergleich der IR-Schwingungsbanden miteinander verhindert. Die Chrom-Verbindung ist nahezu linear und zeigt die erwarteten drei IR-Schwingungsbanden für die Carbonyle, die im Vergleich zum Chrom-Bis(trimethylsilyl)aminoborylen-Komplex (OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) zu höheren Energien verschoben sind. Die Befunde deuten darauf hin, dass der ({BN(SiMe\(_3\))(t-Bu)})-Ligand ein etwas stärkerer σ-Donor ist. [3] Wie in Transferreaktionen gezeigt werden konnte, bevorzugt der Borylen-Ligand {BN(SiMe\(_3\))(t-Bu)} einen terminalen Koordinationsmodus bei Lewis-aciden, frühen Übergangsmetallen und einen verbrückenden Koordinationsmodus bei Lewis-basischen, späten Übergangsmetallen. Projekt: Borirene Die Synthese der ersten Bis(borirenyl)platin-Komplexe wurde vorgestellt, zusammen mit strukturellen und elektronischen Auswirkungen der koplanar angeordneten Borirenringe. Die Reihe der trans-Bis(borirenyl)platin-Komplexe 119/120, 122/123, und 125/126 stellt die ersten Beispiele für Bis(boriren)-Komplexe dar, in denen die Ringsysteme koplanar zueinander angeordnet sind (Abbildung 6-4). Die Rolle des Platinatoms als Vermittler elektronischer Kommunikation zwischen den chromophoren, aromatischen Borliganden manifestiert sich in einem bathochromen Shift der Boriren-Absorptionsbanden im Vergleich zu Mono-σ-Borirenyl-Systemen, als Folge einer ausgedehnten Elektronendelokalisierung. Das trans-Bis(boriren)platin-Gerüst dient dabei als vereinfachtes monomeres System, um sowohl die Effekte des Übergangmetallatoms in der Vermittlung elektronischer Konjugation als auch die Abstimmbarkeit der photophysikalischen Eigenschaften in Abhängigkeit der dreigliedrigen, aromatischen Ringe zu studieren. Eine Reihe von trans-Bis(alkinyl)platin-Komplexen (95, 102, 106, und 63) wurde als Plattform für den Borylentransfer von {BN(SiMe\(_3\))\(_2\)} dargestellt (Abbildung 6-3). Durch Salzeliminierungsreaktionen von cis-[PtCl\(_2\)(PEt\(_3\))\(_2\)] (93) mit zwei Äquivalenten des entsprechenden Alkins in Diethylamin ließen sich die Komplexe "trans-[Pt(C≡C-Ph)\(_2\)(PEt\(_3\))\(_2\)]" (95), "trans-[Pt(C≡C-p-C\(_6\)H\(_4\)OMe)\(_2\)(PEt\(_3\))\(_2\)] " (102), "trans-[Pt(C≡C-p-C\(_6\)H\(_4\)CF\(_3\))\(_2\)(PEt\(_3\))\(_2\)]" (106), und "trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)]" (63) synthetisieren. Drei trans-Bis(borirenyl)platin-Komplexe (119/120, 122/123, und 125/126) konnten erfolgreich durch photolytischen Transfer des terminalen Borylen-Liganden {BN(SiMe\(_3\))\(_2\)} vom Chrom-Komplex [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) auf die trans-Bis(alkinyl)platin-Komplexe (95, 102, und 106) dargestellt werden (Abbildung 6-4). Versuche des Borylentransfers auf den trans-Bis(alkinyl)platin-Komplex "trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)]" (63) scheiterten an der Photoinstabilität des Komplexes. Obwohl eine weitere Vielzahl an Platin-Alkinyl-Komplexen dargestellt wurde, verlief der Borylentransfer nur bei den drei eben erwähnten Komplexen erfolgreich. Weitere Bestrebungen, ein cis-Isomer zum direkten Vergleich mit den trans-konfigurierten Komplexen darzustellen, verliefen ebenfalls erfolglos. Außerdem wurden terminal funktionalisierte Platin-Komplexe vom Gladysz-Typ als Plattform zum Borylentransfer synthetisiert, zeigten sich aber ebenfalls instabil unter photolytischen Bedingungen. Eine Reihe neuer Monoborirene Ph-(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph (148), trans- [PtCl{(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph}(PEt\(_3\))\(_2\)] (149), und [(η\(^5\)-C\(_5\)Me\(_5\))(OC)\(_2\)Fe(μ- {BN(SiMe\(_3\))(t-Bu)}C=C)Ph] (150) wurde durch photolytischen und thermischen Transfer des unsymmetrischen {BN(SiMe\(_3\))(t-Bu)}-Liganden ausgehend von den Komplexen [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), und W (21)) auf organische und organometallische Alkin-Substrate dargestellt. Ziel dieser Umsetzungen war es zu untersuchen, ob der unsymmetrische Borylen-Ligand eine andere Reaktivität im Vergleich zu den symmetrischen, terminalen Borylenen der Form [(OC)\(_5\)M{BN(SiMe\(_3\))\(_2\)}] (M = Cr (13), Mo (14), und W (15)) aufweist. Die entsprechenden Monoborirene wurden als analytisch reine Öle isoliert. Zur Röntgenstrukturanalyse geeignete Einkristalle konnten demnach nicht erhalten werden. Projekt: Boratabenzole Der Bis(boratabenzol)-Komplex [{(η\(^5\)-C\(_5\)H\(_5\))Co}\(_2\){μ:η\(^6\),η\(^6\)-(BC\(_5\)H\(_5\))\(_2\)}](189) wurde durch Umsetzung von Tetrabromdiboran (65) mit sechs Äquivalenten Cobaltocen erfolgreich dargestellt. Die Reaktion ist in der Hinsicht besonders, da Cobaltocen (176) sowohl als Reagens als auch als Reduktionsmittel fungiert (Abbildung 6-5). Der bimetallische Übergangsmetallkomplex besteht aus einem verbrückenden Bis(boratabenzol)-Liganden, der die beiden Metallzentren durch eine Bor-Bor-Einfachbindung verbindet. Es konnte gezeigt werden, dass der neuartige Ligand eine Delokalisierung der π-Elektronen zwischen den Cobaltatomen ermöglicht, begünstigt durch das zur Bor-Bor-Bindung zugehörige LUMO. Wie durch die Separation aufeinanderfolgender Redoxprozesse im Cyclovoltammogramm gezeigt werden konnte, vermittelt der dianionische Diborligand die elektronische Kopplung zwischen den Cobaltatomen. Vier verschiedene Redoxpotentiale wurden für Komplex 189 gefunden:E\(_{1/2}\)(1) = −0.84 V, E\(_{1/2}\)(2) = −0.94 V, E\(_{1/2}\)(3) = −2.09 V, und E\(_{1/2}\)(4) = −2.36 V (referenziert gegen das Fc/Fc+-Paar) (Abbildung 6-6). Die Potentiale können zwei dicht beieinander liegenden Oxidationsprozessen ([(189)]\(^{0/+1}\) und [(189)]\(^{+1/+2}\) und zwei gut getrennten Reduktionsprozessen [(189)]\(^{+1/+2}\) und [(189)]\(^{–1/–2}\) zugeordnet werden. Das Ausmaß der Metall-Metall-Kommunikation ist dabei abhängig von der Ladung der Metallatome. Die negative Ladung wird effektiver durch die Bis(boratabenzol)-Einheit delokalisiert (Robin-Day-Klasse II). Magnetische Messungen deuten darauf hin, dass die Cobalt(II)-Ionen schwach antiferromagnetisch über die B-B-Brücke gekoppelt sind. Während die Reduktion des Bis(boratabenzol)-Systems zur Zersetzung des Komplexes führte, resultierte die Ein- und Zwei-Elektronen-Oxidation in isolierbaren, stabilen monokationischen (194) bzw. dikationischen (195) Formen des Bis(boratabenzol)-Komplexes (Abbildung 6-7). Die präparativen Arbeiten bestätigen damit die elektrochemischen Ergebnisse an der neutralen Verbindung. Die kationischen Spezies zeigten sich instabil in Acetonitril oder Nitromethan, den einzigen Lösungsmitteln worin sie sich lösten, was weitere Reaktivitätsstudien erschwerte. Schließlich wurde die Reaktivität des neutralen Bis(boratabenzol)-Komplexes 189 eingehender untersucht. Versuche zur (A) Abspaltung des freien Bis(boratabenzol)-Liganden durch Dekomplexierung der Cyclopentadienylcobalt-Fragmente und zur (B) oxidativen Addition von Übergangsmetall-Komplexen an die B-B-Bindung, um die ersten L\(_x\)M-η\(^1\)-(BC\(_5\)H\(_5\))Komplexe darzustellen, wurden unternommen. Alle Versuche zeigten jedoch, dass die eingesetzten Reagenzien entweder zu keinen Umsetzungen oder zur Zersetzung des Bis(boratabenzol)-Komplexes führten. Bisher konnten somit noch keine Hinweise auf eine oxidative Addition der B-B-Bindung im Bis(boratabenzol)-Komplex erhalten werden. KW - Borverbindungen KW - Boron Chemistry KW - Aromatic Systems KW - Transition Metals KW - Aromaten KW - Übergangsmetall KW - Chemistry Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-137498 ER - TY - THES A1 - Schäfer, Marius T1 - Darstellung und Reaktivität von Iminoboranen sowie deren Einsatz bei der Synthese von Azaborininen T1 - Synthesis and Reactivity of Iminoboranes and their Usage in the Synthesis of Azaborinines N2 - Die Dissertation befasst sich mit der Darstellung von Iminoboranen sowie deren Verwendung bei der Rhodium-vermittelten Synthese von Azaborininen. N2 - The first examples of adducts of cyclic alkyl(amino) carbenes (cAACs) and N-heterocyclic carbenes (NHCs) with iminoboranes have been synthesized and fully characterized. Furthermore new synthetic route to functionalized 1,2 and 1,4-azaborinines has been developed utilizing a [2+2]/[2+4] cycloaddition reaction of di-tert-butyliminoborane and the unsymmetric (tert-butylimino)mesityborane with a series of alkynes in presence of the rhodium complex [{RhCl(PiPr3)2}]2. KW - Iminoborane KW - Azaborinine Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136959 ER - TY - INPR A1 - Braunschweig, Holger A1 - Krummenacher, Ivo A1 - Lichtenberg, Crispin A1 - Mattock, James A1 - Schäfer, Marius A1 - Schmidt, Uwe A1 - Schneider, Christoph A1 - Steffenhagen, Thomas A1 - Ullrich, Stefan A1 - Vargas, Alfredo T1 - Dibora[2]ferrocenophane: A Carbene-Stabilized Diborene in a Strained cis-Configuration T2 - Angewandte Chemie, International Edition N2 - Unsaturated bridges that link the two cyclopentadienyl ligands together in strained ansa metallocenes are rare and limited to carbon-carbon double bonds. The synthesis and isolation of a strained ferrocenophane containing an unsaturated two-boron bridge, isoelectronic with a C=C double bond, was achieved by reduction of a carbene-stabilized 1,1’-bis(dihaloboryl)ferrocene. A combination of spectroscopic and electrochemical measurements as well as density functional theory (DFT) calculations was used to assess the influence of the unprecedented strained cis configuration on the optical and electrochemical properties of the carbene-stabilized diborene unit. Initial reactivity studies show that the dibora[2]ferrocenophane is prone to boron-boron double bond cleavage reactions. KW - Boron KW - Metallocenes KW - Metallocene KW - Bor KW - Diborane KW - density functional calculations KW - strained molecules KW - diborenes Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-141981 N1 - This is the pre-peer reviewed version of the following article: Angewandte Chemie, International Edition, Volume 56, Issue 3, 889–892, which has been published in final form at doi:10.1002/anie.201609601. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. ER - TY - THES A1 - Somorowsky, Ferdinand T1 - Entwicklung von nanoporösen Gläsern mit kontrollierten Sorptionseigenschaften zur Verbesserung des Innenraumklimas T1 - Development of nanoporous glasses with controlled sorption characteristics to improve the climate of living rooms N2 - Im Rahmen der vorliegenden Arbeit wurde die prinzipielle Eignung von porösen Vycor®-Gläsern als Feuchteregulierungsmaterial für den Einsatz im Baubereich erarbeitet. Im Speziellen wurden die Einflüsse der Herstellungsparameter auf die Glaseigenschaften entwickelt und optimiert. Die porösen Glasflakes wurden in angepasste Putzsysteme implementiert und praxisnahe Untersuchungen der Wirksamkeit durchgeführt. Unterstützt wurden die Ergebnisse durch auf Messwerten basierte Simulationen des Gebäudeklimas, welche auch die Auswirkungen bei verschiedenen klimatischen Bedingungen berücksichtigen. Der verwendete Prozess zur Herstellung der porösen Gläser basiert auf dem 1933 patentierten Vycor®-Verfahren [HOO34][HOO38]. Durch eine Temperaturbehandlung entmischt das homogene Natrium-Borosilicatglas in zwei perkolierende, interpenetrierende Phasen. Diese weisen deutlich unterschiedliche chemische Beständigkeiten auf. Durch Auflösen der instabileren Phase verbleibt ein poröses, fast reines Siliciumdioxidgefüge, dessen Struktur und Eigenschaften durch die Wahl der Prozessparameter eingestellt werden kann. Erstmals konnte gezeigt werden, dass poröse Vycor®-Gläser in der Lage sind, Wasser bei Raumtemperatur reversibel aufzunehmen, im Porensystem zu speichern und wieder abzugeben. Basierend auf dieser unerlässlichen Eigenschaft, konnten die Vycor®-Gläser durch eine Optimierung und ein besseres Verständnis der Herstellungsparameter hin zu einem Material mit wirklichen Feuchteregulierungseigenschaften qualifiziert werden. Im ersten Teil der vorliegenden Arbeit (Kapitel 4.1 und 4.2) wurde der Einfluss der strukturbestimmenden Parameter Glaszusammensetzung, Partikelgröße bzw. -form und Entmischungsbedingungen auf das Sorptionsverhalten von Wasser dargestellt. Um die Wasseraufnahme und -abgabe sowie das Zusammenspiel (Zyklisierbarkeit) bei unterschiedlichen Luftfeuchtigkeiten zu untersuchen, wurde in einem Klimaschrank ein realitätsnahes Feuchte- und Temperaturprofil generiert. Hiermit konnte die Zyklisierbarkeit der porösen Gläser in Abhängigkeit der Glaseigenschaften beobachtet werden. Ergänzt wurde die Charakterisierung durch Stickstoffsorptionsuntersuchungen und REM-Aufnahmen. Bei der Glaszusammensetzung wurde der Einfluss des Siliciumdioxid-Anteils und des Boroxid zu Natriumoxid Verhältnisses auf das finale poröse Glas betrachtet. Es zeigte sich, dass Gläser mit einem geringeren SiO2 Anteil zu Gläsern mit einer höheren Porosität, einer höheren spezifischen Oberfläche und als Folge daraus zu einer besseren Zyklisierbarkeit führen. Die praktische Einsatzfähigkeit wird allerdings von einer ungenügenden mechanischen Beständigkeit von Gläsern mit Siliciumdioxidgehalten unterhalb von 50 MA% begrenzt. Das B2O3/Na2O-Verhältnis wirkt sich vor allem auf den Grad des Entmischungsverlaufs und damit auf die sich bildende interpenetrierende Struktur aus. Erkennbar ist dies an der zum Boroxidanteil indirekt proportionalen Transformationstemperatur. Dies zeigt sich ebenfalls bei den Zyklisierungsversuchen, bei denen sich die Wasseraufnahme bzw. -abgabe bei gegebener Temperatur und unterschiedlichem B2O3/Na2O-Verhältnis deutlich unterscheidet. Anhand der entsprechenden Stickstoffsorptionsuntersuchungen konnte gezeigt werden, dass das Reaktionsvermögen eines porösen Glases auf einen Temperatur- und Feuchtezyklus, ein Zusammenspiel aus passendem Porendurchmesser und hoher spezifischer Oberfläche ist. Einen besonderen Aspekt der vorliegenden Arbeit stellt die Untersuchung von Glasflakes, flache Plättchen mit Dicken von einigen µm und Durchmessern von bis zu 1000 µm, dar. Diese können z. B. mittels eines Rotationsflakers hergestellt werden. Es konnte gezeigt werden, dass die mit den Flakes versehenen Wandanstriche nicht nur bessere Verarbeitungseigenschaften aufweisen, sondern auch im Vergleich zu annähernd isotropen Partikeln signifikant verbesserte Sorptionseigenschaften besitzen. Die Ausbildung der Porengröße und damit der spezifischen Oberfläche verläuft hauptsächlich über den einstellbaren thermischen Entmischungsvorgang. Um die optimalen Parameter für die Feuchtigkeitsaufnahme und -abgabe zu finden, wurde in dieser Arbeit neben der Plateautemperatur auch die Entmischungsdauer variiert. Oberhalb von ca. 520 °C ist die charakteristische Phasenseparation energetisch begünstigt. Diese verstärkt sich mit steigender Temperatur, wodurch größere Entmischungsbezirke entstehen. Oberhalb von ca. 650 °C kommt es zum Zusammensintern der Glasflakes, sodass deren ursprüngliche Geometrie zerstört wird. Für Untersuchungen oberhalb dieser Temperaturen muss also das Rohglas entmischt und erst im nachfolgenden Prozess zu Pulver aufgemahlen werden. Glasflakes sind durch diesen Verarbeitungsprozess jedoch nicht mehr herstellbar. Ein entscheidendes neues Ergebnis dieser Arbeit ist, dass die Porengröße innerhalb dieses Temperaturbereiches durch Anpassung der Entmischungstemperatur annähernd nanometer-genau eingestellt werden kann. Dies zeigt auch den großen Vorteil poröser Vycor®-Gläser im Vergleich zu anderen porösen Materialien. Für die Feuchteregulierung erwies sich ein Porendurchmesser von 3,8 nm, welcher durch eine Entmischungstemperatur von 533 °C generiert wird, als optimal. Die Dauer der Entmischung hat vor allem einen Einfluss auf den Fortschritt des Porenwachstums, nicht jedoch auf die Porengröße selbst. Nach ca. 30 Minuten kann das Entstehen der Poren erstmals eindeutig nachgewiesen werden. Der Entmischungsprozess ist nach ca. 24 Stunden abgeschlossen. Eine Verlängerung der Entmischungszeit hat keine weitere Veränderung der Porenstruktur zur Folge. In Kombination mit den Ergebnissen der Untersuchungen zum Einfluss des B2O3/Na2O-Verhältnisses konnte gezeigt werden, dass durch die Wahl der passenden Entmischungstemperatur die gewünschte Porengröße, in weiten Bereichen unabhängig vom B2O3/Na2O-Verhältnis, gezielt eingestellt werden kann. Im zweiten Teil der Arbeit wurde die Auslaugung hinsichtlich technischer Funktionalität und Umweltfreundlichkeit optimiert. Hierbei konnte gezeigt werden, dass neben Schwefelsäure auch Salzsäure zur vollständigen Auslaugung verwendet werden kann. Salzsäure kann im Gegensatz zu Schwefelsäure deutlich einfacher wieder aufgearbeitet werden (geringere Temperatur und Druck im Falle einer destillativen Aufarbeitung), was für die wirtschaftliche Anwendung von hoher Bedeutung ist. Weiterhin wurde die Konzentration der Säure verringert. Hierbei konnten bis zu einer Verdünnung auf 0,75 molare Salzsäure noch poröse Gläser mit vergleichbaren Zyklisierungswerten erhalten werden. Erst bei weiterer Verdünnung wurden die entmischten Glasflakes unvollständig ausgelaugt. Ein weiterer Einfluss der verwendeten Säureart oder der Konzentration auf die Porenstruktur bzw. die Porengröße konnte nicht gefunden werden. Wie in der Literatur beschrieben, wurde die Auslaugung der entmischten Gläser zunächst bei hohen Temperaturen oberhalb von 95 °C durchgeführt, sodass dieser Teilschritt viel Energie verbraucht [JAS01]. Um den Prozess ressourcenschonender aufzustellen, wurde im Kapitel 4.3 untersucht, welche Temperatur zwingend benötigt wird. Hierbei wurden die Temperatur und die Säurekonzentration variiert. Diese Parameter verändern den Anteil der Poren, jedoch nicht die Porengröße. Durch eine geringere Temperatur und geringere Säurekonzentrationen nimmt die Porosität ab. Eine Verlängerung der Auslaugedauer auf drei Stunden verbessert den Grad der Auslaugung erheblich. Da die Auslaugung bei 0,40 molarer Salzsäure nicht vollständig verläuft, wurde bei dieser Konzentration die Auslaugedauer nochmals einzeln betrachtet. Hierbei bestätigte sich, dass eine längere Auslaugung den Anteil der in der Entmischung eingestellten Poren vergrößert und auch die Zyklisierbarkeit (Massenhub) zunimmt. Die Werte von den mit 1,5 molarer Salzsäure ausgelaugten Gläsern können, trotz einer Dauer von bis zu acht Stunden, jedoch nicht erreicht werden. Eine alternative Möglichkeit um die Auslaugung ressourcenschonender zu gestalten, wurde mit dem neuen Ansatz die Synthese unter hydrothermischen Bedingungen durchzuführen, entwickelt. Hierbei wurden die entmischten Gläser entweder mit verdünnter Säure (0,75 mol/l HCl) oder mit Wasser in einem Autoklaven bei Temperaturen von 100 °C bis 200 °C, einem Reaktionsdruck von bis zu 30 bar und für bis zu 20 Stunden behandelt. Im Fall der Salzsäure verursachen alle drei Parameter eine Veränderung der Porenstruktur. In der Porengrößenbetrachtung mittels Stickstoffsorption erkennt man einen zweiten Peak bei größerem Durchmesser, wobei der ursprüngliche Peak abnimmt. Dies deutet auf ein Auflösen der ursprünglichen Porenwände hin. Die Zunahme des Porenvolumens und die Abnahme der spezifischen Oberfläche bestätigt diese Annahme. Da die resultierende Porenstruktur und die spezifische Oberfläche stark verändert werden, ist diese hydrothermale Methode zur Fertigung von Glasflakes für die Anwendung als Feuchtespeichermaterial nicht geeignet. Für andere Anwendungsfelder (siehe Seite 85) könnte diese Möglichkeit dennoch sehr interessant sein, da so leicht ein bimodales Porensystem hergestellt werden kann. Das Kapitel „Variation der Auslaugebedingungen“ wird mit Untersuchungen zur Wiederverwertbarkeit von Auslaugemedium und Borsäure abgeschlossen. Hierzu wird die gelöste Borsäure aus dem Auslaugemedium bei Raumtemperatur ausgefällt. Eine anschließende destillative Aufreinigung kann zu einem nahezu vollständigen Recycling, sowohl des Auslaugemediums als auch der Borsäure, führen. Neben dem Einfluss der Glasherstellung und der Herstellungsparameter auf die Wasserauf- und -abgabefähigkeit der porösen Gläser, wurden auch die Parameter der Klimaprofile (Raumtemperaturschwankungen, Änderung der Feuchtigkeit) genauer betrachtet. Die Sorption hängt stark von der Temperatur ab. Die Wasserabgabe wird durch eine höhere Temperatur (50 °C) erhöht und beschleunigt. Dieser Effekt zeigt sich auch bei der Zyklisierung. Der Massenhub beträgt bei 50 °C 12,1 MA%, bei 20 °C nur noch 3,3 MA% bei identischem Feuchte- und Zeitprofil. Die Kinetik der Wasseraufnahme und -abgabe wurde anhand von Klimaprofilen mit unterschiedlichen Änderungsraten untersucht. Hierbei fand die Feuchteänderung von 30 % auf 90 % innerhalb von einer Stunde, zwei Stunden und vier Stunden statt. Untersucht wurden die für den Einsatz als Feuchteregulierungsmaterial optimierten Glasflakes sowie Flakes mit größeren und kleineren Porendurchmessern. Bei allen Proben findet die Aufnahme deutlich schneller statt als die Desorption. Ein Grund hierfür ist der Flaschenhalsporeneffekt (siehe Seite 37). Des Weiteren ist bei den optimierten Glasflakes die Steigung der Massenänderung, unabhängig von der Feuchteänderungsrate, immer am größten. Diese Gläser sprechen also am direktesten auf Änderungen der Luftfeuchtigkeit an und es bestätigt sich, dass die Einstellung der richtigen Porengröße entscheidend ist. Dies konnte im Rahmen der vorliegenden Arbeit realisiert werden. Darüber hinaus ermöglichen die Ergebnisse der Experimente zur Sorptionskinetik einen umfassenderen Blick auf die Sorption und dabei insbesondere auf die Poreneigenschaften und auf die Sorptionsvorgeschichte. Ebenfalls wurde die Alterung der Sorptionsfähigkeit untersucht. Bei bis zu 20 Wiederholungszyklen konnte kein negativer Effekt beobachtet werden. Die Wasseraufnahme und -abgabe hat neben dem feuchtigkeitsregulierenden auch eine energetische Auswirkung auf den Energiehaushalt in einem Gebäude. Da bei jeder Sorption Energie verbraucht bzw. frei wird, kann ein wärmeregulierender Effekt auftreten. Um diesen Effekt genauer zu quantifizieren, wurde die Desorption von konditionierten Gläsern mittels Differenzkalorimetrie untersucht. Der Energiebetrag kann sowohl bei den Glasflakes als auch bei den mit Flakes versetzten Putzen detektiert werden und korreliert mit der gespeicherten Wassermenge. Auch wenn die Einzelenergiemenge pro Vorgang sehr gering ist, so summiert sich diese bei den vielen Vorgängen über das Jahr hinweg zu einem erheblichen Gesamtenergiebetrag (ca. 6 % des Energieverbrauchs in einem Wohnhaus), welcher eine interessante Ergänzung zur Feuchtigkeitsregulierung darstellen kann. Mit den für die Wasserauf- und -abgabe optimierten porösen Gläsern wurden Wandanstriche (Putze und Farben) hergestellt (siehe Seite 112) und diese auf ihre Eignung als Feuchteregulierungsmaterial untersucht. Im Vergleich mit den Standardputzen haben die Klimaputze mit dem Zusatz von Glasflakes aktuell noch geringere mechanische Kennwerte, insbesondere Druckfestigkeit und Dynamisches E-Modul. Dies ist vor allem auf das lockere Gefüge durch die Beimischung der Glasflakes zurückzuführen. Die Beimengung führt umgekehrt aber zu einer Steigerung der Porosität und der spezifischen Oberfläche. REM-Aufnahmen belegen dies. Durch Optimierung der Putzzusammensetzung gibt es jedoch eine gute Chance, die mechanischen Eigenschaften der Klimaputze noch zu verbessern. Um den Feuchteregulierungseffekt besser einschätzen zu können, wurde in Zyklisierungsversuchen der Vycor®-Putz mit kommerziellen Putzen mit und ohne zusätzliche Regulierungsfunktionalität und anderen Feuchteregulierungsmaterialien, wie Zeolithen und Holzfaserplatten, verglichen. Dabei zeigte der Putz mit den optimierten Glasflakes eine deutlich höhere Wasseraufnahmekapazität, ein direkteres Ansprechverhalten auf Feuchtigkeitsschwankungen und einen sehr viel höheren Massenhub. Erkennbar wird dies vor allem beim realitätsnahen Vergleich von zwei Wandstücken. Hierfür wurden Trägerplatten als Basis sowohl mit einem Standardputz als auch mit dem Vycor®-Klimaputz aufgebaut. Das Vycor®-Wandsystem konnte den Feuchtigkeitssprung im Klimaschrank von 72 % r. L. auf 40 % r. L. vollständig abpuffern. Der Massenhub betrug mit ca. 13 g Wasser pro m2 Wandfläche sogar das Dreifache der eigentlich zu bindenden Wassermenge. In Zusammenarbeit mit der Universität Bayreuth konnten die im Labor gewonnen Ergebnisse mittels Simulationsberechnungen untermauert werden. Mit dem Software-Tool WUFI (Wärme und Feuchte instationär) konnte sowohl eine Regulierung der jahreszeitlichen Feuchteschwankungen als auch ein positiver Effekt auf das Wohlbefinden der Bewohner gezeigt werden. Durch die Simulationen, deren Eingangswerte auf realen Messwerten basieren, konnte nachgewiesen werden, dass sowohl poröse Gläser als auch die mit porösen Glasflakes versetzen Baustoffe einen deutlich messbaren positiven Effekt auf das Raumklima haben. Der direkte Nachweis, also ein positiver Effekt des porösen Glases auf das Raumklima, wurde bisher nur in Simulationen modelliert und ist unter realen Versuchsbedingungen noch zu prüfen. Hierzu müsste ein Testraum aufgebaut und über längere Zeit vermessen werden. Im Rahmen dieser Arbeit wurde an Hand der voran beschriebenen Ergebnisse das poröse Glassystem der Vycor®-Gläser hinsichtlich seiner kontrollierten Sorptionseigenschaften für eine Anwendung als Feuchteregulierungsmaterial entwickelt. Im Zuge dessen wurde ein besseres Verständnis für die Abläufe und Mechanismen der auftretenden spinodalen Entmischung erarbeitet. Weiterhin konnten die Zusammenhänge zwischen den Poreneigenschaften und der Sorption von Wasser tiefgehender verstanden werden, sodass wichtige Erkenntnisse gewonnen werden konnten, um poröses Vycor®-Glas als Modellsystem für Entmischung und Sorption weiter zu etablieren. N2 - In the present work, the principles of the application of porous Vycor®-glass as a humidity regulation material for civil engineering applications were investigated. First, the influences of production process parameters on the glass properties were developed and optimized. Then, the adapted porous glass flakes were implemented in customized plaster systems. These plasters were characterized in application-oriented studies. The results were supported by simulations of the indoor climate, based on measured data. Within these simulations the impact of different climatic conditions were regarded. The production process of the porous glasses is based on the 1933 patented Vycor®-method [HOO34][HOO38]. The homogeneous alkali borosilicate glass separates into two percolating phases by a heat treatment, one phase is almost pure SiO2 glass, and the other an almost pure sodium borate glass. The two phases have a different chemical resistance towards acids and after dissolving the unstable sodium-borate phase, an almost pure silicon dioxide framework remains. The structure and the properties of this porous SiO2-structure depend significantly on the process parameters. In the first part of this thesis (Chapter 4.1 and 4.2), the influence of structural determining parameters (the glass composition, the particle size and particle shape and the conditions of the phase separation) on the water sorption properties were investigated. To determine the water absorption and release, as well as the interaction (cyclisation) at different relative humidities, a realistic humidity and temperature profile was generated in a climate chamber. Hereby, the cyclisation of the porous glasses could be correlated with the glass properties. These investigations were complemented by nitrogen sorption measurements and SEM investigations. To further consider the influence of the glass composition on the porous glass, the silica content and the ratio of boron oxide to sodium oxide were varied. It was found that a lower SiO2 content causes a higher porosity, a higher specific surface area and, hence, a better cyclisation behavior of the final product. But this effect is limited by the mechanical durability of the glass which is only stable up to 50 MA%. The ratio of B2O3/Na2O especially affects the degree of the phase separation at a given temperature. This can be already perceived by the transformation temperature, which decreases with increasing boron content in the glass. This was also confirmed by the water sorption experiments: The water uptake and release at a given temperature differs significantly with different B2O3/Na2O ratios in the initial glass. Regarding the corresponding nitrogen sorption measurements, it was shown that a high sorption capacity towards a temperature and humidity cycle is triggered by a combination of suitable pore diameter and high specific surface. A very important and also new aspect of this thesis is the investigation of glass flakes, with a thickness of a few μm and diameters of up to 1000 μm. These flitters can be produced by means of a rotary flaker. The wall paints made with these glass flakes show a better handling than with isotropic particles, additional these wall paints also have significantly improved sorption properties in comparison to similar glass powders with an isotropic particle size. The formation of the pores and hence the specific surface area of the porous SiO2-network is mainly determined by the adjustable thermal phase separation process. In order to find the optimum parameters to guarantee high water absorption and release capacity, the plateau temperatures as well as the time of this heat treatment were varied. Above 520 °C, the formation of the characteristic phase separation is entropically favored. With increasing temperature the kinetics of the demixing is accelerated and the size of the phase separated domains increase. Above approximately 650 °C the glass flakes sinter and thus their original geometry is destroyed. To investigate the influence of higher temperatures, the raw glass must be phase separated and grinded to powder in a subsequent process step. However, only spherical particles can be produced this way, but no particles in a flake shape. A new and also a key result of this work is, that the pore size, within the range of 2 to 35 nm, can be adjusted with a reproducibility less than one nanometer by adjusting the separation temperature precisely. This tunability is a great advantage of the porous Vycor®-glass in comparison to other porous materials. To regulate the humidity very effective, a pore diameter of 3.8 nm, which is generated by a phase separation temperature of 533 °C, was proved to be the best. The duration of the separation process has mainly an impact on the progress of the pore growth, but less on the pore size itself. After about 30 minutes phase separation time, the formation of pores can be detected. This process is completed after 24 hours. Any additional extension of the phase separation time has no further impact on the pore structure of the phase separated glass. In combination with the results of studies on the influence of the B2O3/Na2O ratio it was shown that any desired pore size can be adjusted in a wide range by selection of the phase separation temperature almost independent of the B2O3/Na2O ratio. In the second part of this work, the leaching step was optimized with regard to technical applicability and environmental friendliness. It was shown that the acid needed to dissolve the sodium borate glass could be changed from sulfuric acid to hydrochloric acid without any loss in function. Hydrochloric acid can be much better recycled, e. g. by a distillation process, than sulfuric acid. Furthermore, the concentration of the acid was reduced in comparison to the standard procedure. Above a dilution of 0.75 molar hydrochloric acid, comparable cyclisation properties could be obtained for the porous glasses. Only when the acid is further diluted, the separated glass flakes were leached out incomplete. In addition no effect on the pore structure and the pore size of the type of acid or the concentration was found. As described in the literature, the leaching of separated glasses is performed at high temperatures (usually more than 95 °C). Obviously, this process step consumes a lot of energy [JAS01]. In order to reduce the energy consumption, the leaching was examined as a function of the temperature in Chapter 4.3. Besides the temperature, also the concentrations of the acids investigated here were reduced to significant lower values. The variation of these parameters does not change the pore size, but the number of pores: Applying a lower temperature and lower acid concentration, the porosity decreases. An extension of the leaching time up to 3 hours improves the degree of leaching. Since the leaching with 0.40 molar HCl is far from complete, the influence of the time of leaching was investigated at this concentration. It can be confirmed that a longer leaching time increases the fraction of pores, generated in the phase separation, and subsequently the cyclisation properties of the final material were ameliorate. However, the values obtained from the porous glasses leached with 1.5 molar HCl cannot be achieved, even after 8 hours of leaching. An alternative route for a more resource-efficient leaching process can be the new concept of a leaching under hydrothermal conditions. In order to investigate this process, the glasses were separated and treated with a dilute acid (0.75 mol/l HCl), as well as with pure water in an autoclave at temperatures of 100 °C to 200 °C, a reaction pressure of up to 30 bar and for up to 20 hours. In the case of hydrochloric acid, all three parameters cause a change of the pore structure. In the pore size distribution as obtained from the nitrogen sorption measurements, a second peak occurs at larger diameters, while the height of the initial peak decreases. This indicates a considerable dissolution of the original pore walls. The increase of the pore volume and the decrease of the specific surface area confirm this assumption. Because of the extreme change of the resulting pore structure, this method is not suitable for the preparation of porous glass for the moisture regulation. Nevertheless, due to the bimodal pore system, porous glass obtained by a leaching under hydrothermal conditions can be of interest for other applications. Chapter 4.3 is completed with an examination of the recyclability of leaching medium and boric acid, the latter being the most precious medium in the process. For this purpose, the dissolved boric acid is precipitated from the leaching medium at room temperature. A subsequent purification by atmospheric distillation completes the recycling of the leaching medium as well as the boric acid. Besides the impact of the glass production process and the production parameters on the water uptake and release, the dynamics of the moisture uptake and releases under conditions relevant for building applications were investigated. The sorption is strongly influenced by the temperature. The release of water is similarly accelerated and increased by a higher operation temperature (50 °C). This effect can also be observed by an increased cyclisation. The difference between the mass maximum and the mass minimum with an identical humidity and time profile is 12.1 MA% at 50 °C and only 3.3 MA% at 20 °C. The kinetics of the water uptake and release was investigated in experiments, where the humidity changes (from 30 % to 90 %) were performed within 1 hour, 2 hours and 4 hours. For this study, glass flakes with optimized pore size (3.8 nm), as well as flakes with larger and smaller pores were investigated. All samples show a significantly faster water adsorption than desorption. One reason for this observation is the “bottleneck pore effect” (see page 37). Furthermore, the slope of the mass change of the optimized glass flakes is always larger irrespective of the moisture gradient. This confirms that the proper pore size is very decisive for the cyclisation dynamics and could be realized in this thesis. Moreover these results provide the possibility to a more comprehensive picture of the sorption, in particular not only as a function of the pore properties, but also on the sorption history. Besides the moisture-regulation, the sorption of water also causes an energetic effect in a living room. The adsorption consumes energy, while the desorption release energy and so an additional heat-regulating effect may occur. In order to quantify this effect, the desorption of conditioned glasses were examined with DSC. These experiments were performed for the pure glass flakes, as well as for the finery system containing these flakes. The results were correlated with the amount of water, which can be stored in the porous system. Although the amount of energy per single sorption step is very low, due to the large number of cyclisations during a year, the total amount of energy can be about 6 % of the energy consumption of a dwelling. So the energy effect is an interesting surplus to the moisture regulation of porous glasses, in particular since it is a “passive” effect. Using porous glasses optimized for the moisture regulation, wall coatings were prepared (see page 112). The whole system was investigated for its suitability as a moisture regulating material. Currently, the plasters with the glass flakes have still a lower mechanical performance in comparison with the standard plasters, especially the compressive strength and the dynamic Youngs-modulus (3268 N/mm² to 1099 N/mm2) are significantly decreased. This is mainly due to the loose structure, resulting from the addition of the glass flakes. On the other hand, this incorporation also leads to an increase in the porosity. Nevertheless, there is a good chance to improve the mechanical properties by optimizing the finery composition. To classify the moisture regulating performance of the Vycor®-finery, benchmark tests were performed where the materials was incorporated into commercial plasters (with and without regulatory functions), zeolite and fiberboard wall plates were selected. These very different materials were compared in cyclisation tests. Here the plaster with the optimized glass flakes show a significantly higher water adsorption capacity, a quicker response to humidity changes and much higher dynamics of water uptake and release in comparison to the other materials. This was verified practically by investigating two wall pieces constructed by using the Vycor®-glass containing concrete. Samples with classical finery and Vycor®-finery were applied on a support plate and exposed to a climate profile. Hereby the Vycor®-wall system was able to adsorb the water amount completely, originating mitted from a humidity change of 72 % r. h. to 40 % r. h. With about 13 g of absorbed water per m2 wall, the water regulation capacity of the wall system was even three times higher than necessary for a typical residential building. In cooperation with the University of Bayreuth, the obtained experimental results were supported by simulation experiments. The commercial tool WUFI (Wärme und Feuchte instationär) confirms a significant equilibration of seasonal humidity fluctuations, even for buildings in different climatic regions, for buildings where the walls were setup by plasters containing the porous glass. In addition, due to the more balanced humidity, there is also a positive effect on the wellbeing of the residents. The simulations, based on real measured data, demonstrated that not only the porous glass flakes itself, but also the finery with the porous glass additives have a significant effect on the indoor climate. This effect, a positive effect of the porous glass on the indoor climate has been modeled in simulations and must be examined in a real experimental setup e.g. by investigating a model room or building. In this work, the porous glass system obtained by thermal separation of the Vycor®-glasses was optimized with regard to its controlled sorption properties for the application as a moisture control material. In this course, a better understanding of the underlying processes and mechanisms of the spinodal separation was developed. In addition, the interaction between pore properties and the sorption of water could be understood more in detail, so that important findings could be gained in order to establish porous Vycor®-glass as a model system for phase separation and sorption. KW - Glas KW - Poröse Medien KW - Raumklima KW - Raumklima KW - Poröser Stoff Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-148100 ER - TY - JOUR A1 - Braunschweig, Holger A1 - Krummenacher, Ivo A1 - Mailänder, Lisa A1 - Pentecost, Leanne A1 - Vargas, Alfredo T1 - Formation of a stable radical by oxidation of a tetraorganoborate JF - Chemical Communications N2 - Herein, we describe the selective formation of a stable neutral spiroborate radical by one-electron oxidation of the corresponding tetraorganoborate salt Li[B(C\(_4\)Ph\(_4\))\(_2\)], formally containing a tetrahedral borate centre and a s-cis-butadiene radical cation as the spin-bearing site. Spectroscopic and computational methods have been used to determine the spin distribution and the chromism observed in the solid state. KW - tetraorganoborate salt KW - spiroborates KW - one-electron oxidation KW - spin distribution KW - chromism Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-191321 VL - 52 IS - 43 ER - TY - JOUR A1 - Braunschweig, Holger A1 - Constantinidis, Philipp A1 - Dellermann, Theresa A1 - Ewing, William A1 - Fischer, Ingo A1 - Hess, Merlin A1 - Knight, Fergus A1 - Rempel, Anna A1 - Schneider, Christoph A1 - Ullrich, Stefan A1 - Vargas, Alfredo A1 - Woolins, Derek T1 - Highly Strained Heterocycles Constructed from Boron–Boron Multiple Bonds and Heavy Chalcogens JF - Angewandte Chemie, International Edition N2 - The reactions of a diborene with elemental selenium or tellurium are shown to afford a diboraselenirane or diboratellurirane, respectively. These reactions are reminiscent of the sequestration of subvalent oxygen and nitrogen in the formation of oxiranes and aziridines; however, such reactivity is not known between alkenes and the heavy chalcogens. Although carbon is too electronegative to affect the reduction of elements with lower relative electronegativity, the highly reducing nature of the B B double bond enables reactions with Se0 and Te0. The capacity of multiple bonds between boron atoms to donate electron density is highlighted in reactions where diborynes behave as nucleophiles, attacking one of the two Te atoms of diaryltellurides, forming salts consisting of diboratellurenium cations and aryltelluride anions. KW - Boron KW - Heterocycles KW - Multiple bonds KW - Selenium KW - Tellurium KW - Bor KW - Heterocyclische Verbindungen KW - Selen KW - Tellur Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-138237 N1 - This is the peer reviewed version of the following article: Angew. Chem. Int. Ed. 2016, 55, 5606–5609, which has been published in final form at 10.1002/anie.201601691. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. N1 - Accepted Version VL - 55 IS - 18 SP - 5606 EP - 5609 ER - TY - INPR A1 - Arrowsmith, Merle A1 - Böhnke, Julian A1 - Braunschweig, Holger A1 - Celik, Mehmet A1 - Claes, Christina A1 - Ewing, William A1 - Krummenacher, Ivo A1 - Lubitz, Katharina A1 - Schneider, Christoph T1 - Neutral Diboron Analogues of Archetypal Aromatic Species by Spontaneous Cycloaddition N2 - Among the numerous routes organic chemists have developed to synthesize benzene derivatives and heteroaro- matic compounds, transition-metal-catalyzed cycloaddition reactions are the most elegant. In contrast, cycloaddition reactions of heavier alkene and alkyne analogues, though limited in scope, proceed uncatalyzed. In this work we present the first spontaneous cycloaddition reactions of lighter alkene and alkyne analogues. Selective addition of unactivated alkynes to boron–boron multiple bonds under ambient con- ditions yielded diborocarbon equivalents of simple aromatic hydrocarbons, including the first neutral 6p-aromatic dibora- benzene compound, a 2 p-aromatic triplet biradical 1,3-dibor- ete, and a phosphine-stabilized 2 p-homoaromatic 1,3-dihydro- 1,3-diborete. DFT calculations suggest that all three com- pounds are aromatic and show frontier molecular orbitals matching those of the related aromatic hydrocarbons, C6H6 and C4H42+, and homoaromatic C4H5+. KW - Aromaticity KW - Biradicals KW - Boron KW - Cycloaddition KW - Multiple bonds KW - Diborane KW - Cycloaddition Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-142500 ER - TY - JOUR A1 - Arrowsmith, Merle A1 - Böhnke, Julian A1 - Braunschweig, Holger A1 - Celik, Mehmet A1 - Claes, Christina A1 - Ewing, William A1 - Krummenacher, Ivo A1 - Lubitz, Katharina A1 - Schneider, Christoph T1 - Neutral Diboron Analogues of Archetypal Aromatic Species by Spontaneous Cycloaddition JF - Angewandte Chemie, International Edition N2 - Among the numerous routes organic chemists have developed to synthesize benzene derivatives and heteroaro- matic compounds, transition-metal-catalyzed cycloaddition reactions are the most elegant. In contrast, cycloaddition reactions of heavier alkene and alkyne analogues, though limited in scope, proceed uncatalyzed. In this work we present the first spontaneous cycloaddition reactions of lighter alkene and alkyne analogues. Selective addition of unactivated alkynes to boron–boron multiple bonds under ambient con- ditions yielded diborocarbon equivalents of simple aromatic hydrocarbons, including the first neutral 6 π-aromatic dibora- benzene compound, a 2  π-aromatic triplet biradical 1,3-dibor- ete, and a phosphine-stabilized 2  π-homoaromatic 1,3-dihydro- 1,3-diborete. DFT calculations suggest that all three com- pounds are aromatic and show frontier molecular orbitals matching those of the related aromatic hydrocarbons, C\(_6\)H\(_6\) and C\(_4\)H\(_4\)\(^{2+}\), and homoaromatic C\(_4\)H\(_5\)\(^+\). KW - Aromaticity KW - Biradicals KW - Boron KW - Cycloaddition KW - Multiple bonds Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-138226 N1 - This is the peer reviewed version of the following article: Angew. Chem. Int. Ed. 2016, 55, 11271–11275, which has been published in final form at 10.1002/anie.201602384. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. VL - 55 ER -