Refine
Has Fulltext
- yes (35)
Is part of the Bibliography
- yes (35)
Year of publication
Document Type
- Doctoral Thesis (33)
- Journal article (1)
- Preprint (1)
Keywords
- Spektroskopie (35) (remove)
Institute
- Institut für Physikalische und Theoretische Chemie (18)
- Physikalisches Institut (11)
- Institut für diagnostische und interventionelle Radiologie (Institut für Röntgendiagnostik) (3)
- Institut für Anorganische Chemie (1)
- Institut für Funktionsmaterialien und Biofabrikation (1)
- Institut für Geographie und Geologie (1)
EU-Project number / Contract (GA) number
- 614623 (2)
The present studies which have been performed in the work-group C-2 (Prof. W. Kiefer) within the program of the Sonderforschungsbereichs 347, deal with the FT-Raman and –IR spectroscopy on new organometallic complexes, synthesized in the work-groups B-2 (Prof. W. Malisch), B-3 (Prof. W. A. Schenk), D-1 (Prof. H. Werner) and D-4 (Prof. D. Stalke). The FT-Raman spectra recorded at 1064 nm led to very useful and interesting information. Furthermore, the DFT calculations which are known to offer promise of obtaining accurate vibrational wavenumbers, were successfully used for the assignment of the vibrational spectra. For the first time it has been possible to ascribe exactly the n(RhC) stretching mode in the vinylidene rhodium(I) complex trans-[RhF(=C=CH2)(PiPr3)2] by using isotopic substitution, in conjunction with theoretical calculations. This is also true for the complexes trans-[RhF(CO)(PiPr3)2], trans-[RhF(C2H4)(PiPr3)2], trans-[RhX(=C=CHPh)(PiPr3)2] (X = F, Cl, Br, I, Me, PhCºC) and trans-[RhX(CN-2,6-xylyl)(PiPr3)2] (X = F, Cl, Br, I, CºCPh). In addition, the comparison between the n(RhC) wavenumbers of the complexes trans-[RhF(=13C=13CH2)(PiPr3)2] and trans-[RhF(CO)(PiPr3)2], containing the isoelectronic ligands 13C=13CH2 and CO, which have the same reduced mass, indicated that the Rh-C bond is stronger in the carbonyl than in the vinylidene complex. Besides, the n(RhF) stretching mode, which has been observed at higher wavenumbers in the FT-Raman and -IR spectra of trans-[RhF(CO)(PiPr3)2], showed that the carbonyl ligand is a better p-acceptor and a less effective s-donor than the vinylidene one. Moreover, the comparison of the n(CºC) and n(Rh-C) modes from the FT-Raman spectrum of the complexes trans-[Rh(CºCPh)(L)(PiPr3)2] (L = C=CHPh, CO, CN-2,6-xylyl) point out that the p-acceptor ability of the ligand trans to CºCPh should rise in the order C=CH2 < CO < CN-2,6-xylyl £ C=CHPh. The investigated sensitivity of the n(RhC), n(CC), n(CO) and n(CN) vibrational modes to the electronic modifications occuring in the vinylidene, carbonyl, ethylene and isonitrile complexes, should allow in the future the examination of the p-acceptor or p-donor properties of further ligands. Likewise, we were able to characterize the influence of various X ligands on the RhC bond by using the n(RhC) stretching mode as a probe for the weakening of this. The calculated wavenumbers of the n(RhC) for the vinylidene complexes trans-[RhX(=C=CHR)(PiPr3)2], where R = H or Ph, suggested that the strength of the Rh=C bond increases along the sequence X = CºCPh < CH3 < I < Br < Cl < F. For the series of carbonyl compounds trans-[RhX(CO)(PiPr3)2], where X = F, Cl, Br and I, analogous results have been obtained and confirmed from the model compounds trans-[RhX(CO)(PMe3)2]. Since, the calculated vibrational modes for the ethylene complex trans-[RhF(C2H4)(PiPr3)2] were in good agreement with the experimental results and supported the description of this complex as a metallacyclopropane, we were interested in getting more information upon this class of compounds. In this context, we have recorded the FT-Raman and -IR spectra of the thioaldehyde complexes mer-[W(CO)3(dmpe)(h2-S=CH2)] and mer-[W(CO)3(dmpe)(h2-S=CD2)] which have been synthezised by B-3. The positions of the different WL vibrational modes anticipated by the DFT calculations, were consistent with the experimental results. Indeed, the analysis of the band shifts in the FT-Raman and –IR spectra of the isotopomer mer-[W(CO)3(dmpe)(h2-S=CD2)] confirmed our assignment. The different stereoisomers of complex mer-[W(CO)3(dmpe)(h2-S=CH2)] were investigated too, since RMN and IR-data have shown that complex mer-[W(CO)3(dmpe)(h2-S=CH2)] lead in solution to an equilibrium. Since the information on the vibrational spectra of the molybdenum and tungsten complexes Cp(CO)2M-PR2-X (M = Mo, W; R = Me, tBu, Ph; X = S, Se) is very scarce, we extended our research work to this class of compounds. We have tried to elucidate the bonding properties in these chalcogenoheterocycle complexes by taking advantage of the mass effect on the different metal atoms (W vs. Mo). Thus, the observed band shifts allowed to assign most of the ML fundamental modes of these complexes. This project and the following one were a cooperation within the work-group B-2. The Raman and IR spectra of the matrix isolated photoproducts expected by the UV irradiation of the iron silyl complex Cp(CO)2FeSiH2CH3 have been already reported by Claudia Fickert and Volker Nagel in their PhD-thesis. Since no exact assignment was feasible for these spectra, we were interested in the study of the reaction products created by irradiation of the carbonyl iron silyl complex Cp(CO)2FeCH2SiH3. Although the calculated characteristic vibrational modes of the metal ligand unit for the various photoproducts are significantly different in constitution, they are very similar in wavenumbers, which did not simplify their identification. However, the theoretical results have been found to be consistent with the earlier experimental results. Finally, the last part of this thesis has been devoted to the (2-Py)2E- anions which exhibit a high selectivity toward metal-coordination. All di(2-pyridyl) amides and -phosphides which were synthesized by D-4, coordinate the R2Al+ fragment via both ring nitrogen atoms. This already suggests that the charge density in the anions is coupled into the rings and accumulated at the ring nitrogen atoms, but the Lewis basicity of the central nitrogen atom in Et2Al(2-Py)2N is still high enough to coordinate a second equivalent AlEt3 to form the Lewis acid base adduct Et2Al(2-Py)2NAlEt3. Due to the higher electronegativity of the central nitrogen atom in Me2Al(2-Py)2N, Et2Al(2-Py)2N and Et2Al(2-Py)2NAlEt3, compared to the bridging two coordinated phosphorus atom in Me2Al(2-Py)2P and Et2Al(2-Py)2P, the di(2-pyridyl)amide is the hardest Lewis base. In the phosphides merely all charge density couples into the rings leaving the central phosphorus atom only attractive for soft metals. These results were confirmed by using DFT and MP2 calculations. Moreover, a similar behaviour has been observed and described for the benzothiazolyl complex [Me2Al{Py(Bth)P}], where complementary investigations are to be continued. The DFT calculations carried out on the model compounds analysed in these studies supply very accurate wavenumbers and molecular geometries, these being in excellent agreement with the experimental results obtained from the corresponding isolated complexes.
In the experiments presented in this work, third-order, time-resolved spectroscopy was applied to the disentanglement of nuclear and electronic degrees of freedom in polyatomic molecules. The motivation for approaching this problem was given by the decisive role that the coupling of nuclear and electronic dynamics plays in the mechanism of photochemical reactions and photobiological processes. In order to approach this complex problem, different strategies within the framework of time-resolved, four-wave mixing spectroscopy were developed that allowed for the dynamic as well as the energetic aspects of vibronic coupling in non-radiative transitions of polyatomic molecules to be addressed. This was achieved by utilizing the influence of optical as well as Raman resonances on four-wave mixing processes. These resonance effects on third-order, optical processes allow for a high selectivity to be attained with respect to the interrogation of specific aspects of molecular dynamics. The development of different strategies within the framework of time-resolved, four-wave mixing spectroscopy for addressing the problem of vibronic coupling began with the experiments on gaseous iodine. This simple, well investigated molecular system was chosen in order to unambiguously characterize the effect of Raman resonances on four-wave mixing processes. A time-resolved degenerative four-wave mixing (DFWM) experiment was carried out on gaseous iodine that allowed for the dynamics of coherent Stokes Raman scattering (CSRS) as well as a coherent anti-Stokes Raman scattering (CARS) to be observed parallel to the dynamics of a DFWM process at different spectral positions of the FWM signal. Here, the state-selectivity of these different FWM processes manifests itself in the vibrational wave packet dynamics on different electronic potentials of iodine. It could be shown that Raman resonances determine the selectivity with which these FWM processes prepare and interrogate nuclear dynamics in different electronic states. With the insight gained into the relevance of Raman resonant processes in FWM spectroscopy, an experimental scheme was devised that utilizes this effect to selectively interrogate the dynamics of a specific vibrational mode within a polyatomic molecule during a radiationless electronic transition. Here, a CARS process was employed to selectively probe specific vibrational modes of a molecular system by variably tuning the energy difference between the lasers involved in the CARS process to be in Raman resonance with the vibrational energy spacing of a particular vibrational mode. Using this aspect of a tunable resonance enhancement within a CARS scheme, this optical process was incorporated in a time-resolved pump-probe experiment as a mode-selective probe mechanism. This type of experimental configuration, that employs four pulsed laser fields, was classified as a pump-CARS scheme. Here, a laser pulse independent of the CARS process initiates the molecular dynamics that are interrogated selectively with respect to the vibrational mode of the system through the simultaneous interaction of the three pulsed fields involved in the CARS process. Time-resolution on a femtosecond timescale is achieved by introducing a time delay between the independent pump laser and the laser pulses of the CARS process. The experimental configuration of a pump-CARS scheme was applied to the study of the nuclear dynamics involved in the radiationless electronic transition between the first excited singlet state (S1) and the electronic ground state (S0) of all-trans-b-carotene. The mode-selective CARS probe allowed for the characteristic timescale with which specific vibrational modes are repopulated in the S0 state to be determined. From the varying repopulation times of specific vibrational modes, a mechanism with which the full set of vibrational states of the S0 potential are repopulated subsequent to the internal conversion process could be postulated. Most importantly, the form of nuclear motion that primarily funnels the population between the two electronic states could be identified as the C=C symmetric symmetric stretch mode in the polyene backbone of b-carotene. With this, the reaction coordinate of this radiationless electronic transition could be identified. The experiment shows, that the CARS probe is capable of determining the nuclear motion coupled to a radiationless electronic transition in complex polyatomic systems. The S1/S0 internal conversion process in b-carotene was further investigated with time-resolved transient gratings. Here, the energetic aspects of a non-adiabatic transition was addressed by determining the influence of the vibrational energy on the rate of this internal conversion. In order to compare the rate of internal conversion taking place out of vibrational ground state modes versus this transition initiating out of vibrationally hot modes, the strategy of shifting the probe mechanism in the transient grating scheme to spectral positions within and out of the red flank of the S1 absorption profile was pursued. The interrogation of different vibrational states was verified by determining the degree of vibrational cooling, taking place parallel to the internal conversion process. With this strategy, it could be shown that vibrationally hot states contribute to the internal conversion with a higher rate than vibrational ground state modes. In summary, different third-order, optical processes in the framework of time-resolved FWM were applied to the study of non-adiabatic dynamics in polyatomic molecules. By utilizing the effect of optical as well as Raman resonances on different FWM processes, it could be shown that third-order, time-resolved spectroscopy is a powerful tool for gaining insight into complex molecular dynamics such as vibronic coupling. The experiments presented in this work showed that the CARS process, as a mode-selective probe in time-resolved experiments, is capable of disentangling nuclear and electronic dynamics.
This work is investigating the electronic structure of organic thin films. A central question in this respect is the influence of the interaction between the molecules in the condensed phase and the interaction at metal-organic interfaces on the electronic properties. For this purpose the experimental methods Photoelectron Spectroscopy (PES) and Near Edge X-ray Absorption Finestructure Spectroscopy (NEXAFS) were applied with highest energy resolution. In addition, ab initio calculations were performed for the theoretical simulation of NEXFAS spectra. The investigation is mainly focussing on thin, vacuum sublimated films of aromatic model molecules with oxygen-containing functional groups (NTCDA, PTCDA, NDCA, BPDCA and ANQ) and Ag(111) surfaces. Due to their large, delocalised p-systems these molecules have very interesting properties for their application in electronic devices. Due to the high energy resolution of third generation synchrotron sources the vibronic fine structure in the NEXAFS spectra of these large molecules could be resolved for the first time in the condensed phase. A comparison of the data of the different molecules provides interesting insight into the coupling between electronic transition and vibronic excitation. Although for these molecules a variety of different vibronic modes exist, the NEXAFS data show that preferentially only on mode couples to each electronic transition. The high-resolution PES spectra of the molecules NTCDA, PTCDA, NDCA, BPDCA and ANQ show distinct differences thus providing a fingerprint for each investigated substance. A comparative analysis of the spectra enabled us to define the 1s binding energies of all chemically different carbon and oxygen atoms. Additional structures in the spectra can be assigned as shake-up satellites. The five molecules are an ideal model system for the investigation of fundamental aspects of core electron spectroscopy, such as initial and final state effects and satellites, that are influenced by the intra- and intermolecular electron distribution in the ground and core ionized state. An important aspect in this thesis is the spectroscopic investigation of structurally different NTCDA monolayer phases on the Ag(111) surface. Marked differences in the electronic structures of the different phases, that can be assigned to differences in the metal-adsorbate interaction, could be demonstrated by XPS and NEXAFS. The substrate bonding can be characterized as chemisorptive for both, the compressed as well as the relaxed NTCDA monolayer, which can be unambiguously deduced from the analysis of satellite structures in the O 1s and C 1s XPS spectra. These satellites are due to dynamic screening by charge transfer from the substrate. The NEXAFS data show consistently, that the NTCDA LUMO becomes partly occupied upon adsorption. Highly interesting phase transitions into disordered low-temperature phases occur upon cooling to 160 K for both, the compressed and the relaxed NTCDA monolayer. Thereby, the adsorbate-substrate bonding is increased and the NTCDA LUMO becomes completely occupied. This can be observed in the NEXAFS data, where transitions involving LUMO final states are quenched. Simultaneously, the XPS data show a distinctly decreased intensity of unscreened photoemission states due to enhanced charge transfer screening. In addition, a hysteresis behaviour could be demonstrated for the phase transition of the relaxed monolayer by temperature dependent NEXAFS experiments and the hysteresis curve was determined. The hysteresis could be quantified to approx. 20 K. From SPA-LEED experiments the activating energy for the phase transition of the relaxed monolayer upon cooling could be determined to 60 meV. Finally, a NEXAFS investigation of polyethylene samples with different comonomer content is presented. Differences in the absorption spectra between samples with different comonomer content could be unambiguously assigned to the different crystallinities of the samples by heating a highly crystalline sample in situ close to the melting temperature. Ab initio calculations on a model matrix of butane molecules show, that the spectra of crystalline and amorphous polyethylene differ distinctly due to the intermolecular interaction, which can be observed best for resonances with strong Rydberg character. Thus, the differences in the PE spectra can be explained by the superposition of the signatures of crystalline and amorphous moieties, that are mixed according to the respective crystallinity.
Quantitative 31P-MR-Spektroskopie am menschlichen Herzen und Etablierung von SLOOP am Skelettmuskel
(2003)
Die vorliegende Arbeit setzt sich mit dem Einsatz der 31P-Magnetresonanzspektroskopie (MRS) zur Untersuchung des menschlichen Herz- und Skelettmuskelstoffwechsels auseinander: [1] Mit der Anwendung und Implementierung der akquisitionsgewichteten CSI (AW-CSI) am menschlichen Herzen konnten wir den Einsatz dieser neuen Methode zur 31P-MR-Bildgebung am klinischen MR-Gerät etablieren. [2] Mit dem erstmaligen Einsatz von SLOOP am Skelettmuskel zur nicht-invasiven Quantifizierung des Energiestoffwechsels mit 31P-MRS erarbeiteten wir neue Untersuchungsprotokolle und konnten sie erfolgreich bei Probanden anwenden. [3] Mit der 31P-MRs konnten wir durch Bestimmung des PCr/ATP Verhältnisses Einflüsse und Veränderungen im Energiestoffwechsel sowohl im infarzierten als auch im nicht-infarzierten Myokard bei Patienten mit vitalem und avitalem anterioren Infarkt nachweisen (FAST). [4] Mit der klinischen Anwendung von SLOOP wurden subklinische Stoffwechselveränderungen bei Patienten mit multipler Sklerose (MS) und bei mit Mitoxantron (MX) therapierten MS-Patienten eruiert. [5] Mit dem erstmalig kombinierten Einsatz von SLOOP bei neuromuskulären Erkrankungen wie myotoner Dystrophie (DM1) und proximaler myotoner Myopathie (PROMM/DM2) wurden Zusammenhänge zwischen Krankheitsdauer, Krankheitsverlauf, Muskelschwäche und dem kardialen und skelettmuskulären Energiestoffwechsel untersucht, um zusätzliche Informationen zum Verständnis der Pathogenese und Entwicklung von DM1 und PROMM/DM2 zu gewinnen.
In vielen Veröffentlichungen ist die Atrophie und die fettige Infiltration der Rotatorenmanschette als wichtiger Prädiktor für den Outcome nach Rekonstruktionen der Rotatorenmanschette belegt worden, insofern, als dass eine fettige Infiltration eine erhöhte Re-Rupturrate bedingt. Der intramuskuläre Fettgehalt wurde bisher mittels einer subjektiven, semiquantitativen Methode, die sich an einer morphologischen CT-Klassifikation orientierte, bestimmt. Durch die in der vorliegenden Arbeit verwendete nichtinvasive 2D-SPLASH Methode ist es möglich, den Verfettungsgrad der Rotatorenmanschettenmuskulatur in einer beliebigen ROI (Region Of Interest) im Rahmen einer Atrophie quantitativ zu bestimmen. Dazu wurden insgesamt 20 Patienten (weiblich/männlich: 7/13, Durchschnittsalter 57,5 ), die unter einem subakromialen Schmerzsyndrom litten, vor der operativen Rekonstruktion der Rotatorenmanschette einer MR-Untersuchung (1,5 T MR Tomograph, Siemens Vision Pro, Siemens AG Erlangen) unterzogen. Die hohe Validität dieser Messmethode ist durch die hochsignifikante Korrelation mit den Phantomuntersuchungen belegt worden. Als weiteres konnte gezeigt werden, dass die fettige Infiltration (bestimmt durch die 2D-SPLASH Methode) nur mäßig mit der mit Hilfe der Quer- und Längsschnittmessungen (cross-sectional areas) bestimmten Muskelatrophie des M. supraspinatus korreliert. Es konnte jedoch ein statistisch gesicherter Zusammenhang zwischen der intramuskulären Verfettung und dem Rupturausmaß belegt werden Zusammenfassend scheint die Entwicklung von Atrophie und fettiger Infiltration der an der Rotatorenmanschette beteiligten Muskeln ein multifaktorielles Geschehen zu sein, an dem eine muskelspezifische Komponente, die Anamnesedauer, die Defektgröße sowie eine Inaktivitäts- und neuromuskuläre Komponente beteiligt sind. Die 31P-MR-Spektroskopie stellt die einzige nichtinvasive Methode dar, mit der der Energiestoffwechsel der Muskulatur in-vivo beurteilt werden kann. In der vorliegenden Arbeit konnten mit Hilfe der 31P-MR-Spektroskopie die Verhältnisse der energiereichen Phosphate, vor allem das Verhältnis zwischen PCr zu ATP, bestimmt werden. Ein signifikanter Unterschied zu einem gesunden Vergleichskollektiv konnte nicht belegt werden. Dabei bleibt fraglich, ob es überhaupt zu einer Veränderung des Energie-stoffwechsels der Rotatorenmanschettenmuskulatur im Rahmen einer Atrophie kommt, wie es bei mitochondrialen, kongenitalen, inflammatorischen und neuropathischen Myopathien nachgewiesen wurde. November 2004
Weltweit sind Trockengebiete in ständiger Veränderung, verursacht durch natürliche klimatische Schwankungen und oftmals durch Prozesse der Landdegradation. Auch weisen die meisten semi-ariden Naturräume eine große räumliche Heterogenität auf, hervorgerufen durch ein kleinräumiges Mosaik aus Gräsern, kleineren Sträuchern und Bereichen offenliegenden Bodens. Die Dichte der Vegetation wird primär vom pflanzenverfügbaren Wasser bestimmt, aber auch der Entwicklungs- und Degradationszustand der Böden sowie anthropogen bedingte Faktoren spielen hierbei eine Rolle. Zur Charakterisierung und Kartierung der Vegetation sowie zur Bewertung des Bodenerosionsrisikos und des Degradationszustands hat sich die Erhebung der Bedeckungsgrade von vitaler, photosynthetisch aktiver Vegetation (PV), von abgestorbener oder zeitweise vertrockneter und somit nicht photosynthetisch aktiver Vegetation (NPV) sowie von offenliegendem Boden als zweckmäßig herausgestellt. Die Nutzung der Fernerkundung für diese Aufgabe erfolgt zumeist nur für kleinmaßstäbige Kartierungen und – im Falle von Multispektralsensoren – unter Vernachlässigung nicht-photosynthetisch aktiver Vegetation. Die räumliche Variabilität der Vegetation-Boden-Mosaike liegt oftmals in der Größenordnung von wenigen Metern und somit unterhalb des räumlichen Auflösungsvermögens von Fernerkundungssystemen. Um dennoch die verschiedenen Anteile innerhalb eines Pixels identifizieren und quantifizieren zu können, sind Methoden der Subpixel-Klassifikation notwendig. In dieser Arbeit wird eine Methodik zur verbesserten und automatisierbaren Ableitung von Bodenbedeckungsgraden in semi-ariden Naturräumen vorgestellt. Hierzu wurde ein Verfahren zur linearen spektralen Entmischung in Form einer Multiple Endmember Spectral Mixture Analysis (MESMA) entwickelt und umgesetzt. Durch diese Methodik kann explizit die spektrale Variabilität von Vegetation und Boden in das Mischungsmodellmiteinbezogen werden, und quantitative Anteile für die funktionalen Klassen PV, NPV und Boden innerhalb eines Pixels erfasst werden. Durch die räumliche Kartierung der verwendeten EM wird weiterhin eine thematische Klassifikation erreicht. Die hierfür benötigten Informationen können – wie im Falle der Spektren reiner Materialien (EM-Spektren) – aus den Bilddaten selbst abgeleitet werden, oder können – wie ein Geländemodell und die Information über den Scanwinkel – im Zuge der Vorprozessierung aus weiteren Datenquellen erzeugt werden. Hinsichtlich der automatisierten EM-Ableitung wird eine zweistufige Methodik eingesetzt, welche auf einer angepassten Version des Sequential Maximum Angle Convex Cone (SMACC)-Verfahrens sowie der Analyse einer ersten Entmischungsiteration basiert. Die Klassifikation der gefundenen potentiellen EM erfolgt durch ein merkmalsbasiertes Verfahren. Weiterhin weisen nicht-photosynthetisch aktive Vegetation und Boden eine hohe spektrale Ähnlichkeit auf. Zur sicheren Trennung kann die Identifikation schmaler Absorptionsbanden dienen. Zu diesen zählen beispielsweise die Absorptionsbanden von Holozellulose und – je nach Bodentyp – Absorptionsbanden von Bodenmineralen. Auch die spektrale Variabilität der Klassen PV und NPV erfordert zur sicheren Unterscheidung die Verwendung biophysikalisch erklärbarer Merkmale im Spektrum. Hierzu zählen unter anderem die Stärke der Chlorophyll-Absorption, die Form und Lage der ’RedEdge’ und das Auftreten von Holozellulosebanden. Da diese spektrale Information bei herkömmlichen Entmischungsansätzen nicht berücksichtigt wird, erfolgt überwiegend eine Optimierung der Gesamtalbedo, was zu einer schlechten Trennung der Klassen führen kann. Aus diesem Grund wird in der vorliegenden Arbeit der MESMA-Ansatz dahingehend erweitert, dass spektrale Information in Form von identifizierten und parametrisierten Absorptionsbanden in den Entmischungsprozess mit einfließt und hierdurch das Potential hyperspektraler Datensätze besser genutzt werden kann. Auch wird in einer zusätzlichen Entmischungsiteration die räumliche Nachbarschaft betrachtet, um insbesondere die Verwendung des sinnvollsten Boden-EMs zu gewährleisten. Ein zusätzliches Problemfeld stellt die numerische Lösung des überbestimmten und oftmals schlecht konditionierten linearen Mischungsmodells dar. Hierzu kann durch die Verwendung des BVLS-Algorithmus und des Ausschlusses kritischer EM-Kombinationen eine numerisch stabile Lösung gefunden werden. Um die oftmals immense Rechenzeit von MESMA-Verfahren zu verkürzen, besteht die Möglichkeit einer iterativen EM-Auswahl und somit die Vermeidung einer Lösung des Mischungssystems durch Berechnung aller EM-Kombinationen (’Brute-Force’-Ansatz). Ein weiterer wichtiger Punkt ist die explizite pixelweise Angabe zur Zuverlässigkeit der Entmischungsergebnisse. Dies erfolgt auf Basis des Mischungsmodells selbst, durch den Vergleich zu empirischen Regressionsmodellen, durch die Berücksichtigung des lokalen Einfallswinkels sowie durch die Integration von Qualitätsangaben der Ausgangsdaten. Um das Verfahren systematisch und unter kontrollierten Bedingungen zu verifizieren und um den Einfluss verschiedener externer Parameter sowie die typischen Genauigkeiten auf einer breiten Datenbasis zu ermitteln, wird eine Simulationskette zur Erzeugung synthetischer Mischungen erstellt. In diese Simulationen fließen Feldspektren von Böden und Pflanzen verschiedener semi-arider Gebiete mit ein, um möglichst viele Fälle abdecken zu können. Die eigentliche Validierung erfolgt auf HyMap-Datensätzen des Naturparks ’Cabo de Gata’ in der andalusischen Provinz Almería sowie auf Messungen, die begleitend im Feld durchgeführt wurden. Hiermit konnte die Methodik auf ihre Genauigkeit unter den konkreten Anforderungen des Anwendungsbeispiels überprüft werden. Die erzielbare Genauigkeit dieser automatisierten Methodik liegt mit einem mittleren Fehler um rund 10% Abundanz absolut im selben Wertebereich oder nur geringfügig höher als die Ergebnisse publizierter manueller MESMA-Ansätze. Weiterhin konnten die typischen Genauigkeiten der Verifikation im Zuge der Validierung bestätigt werden. Den limitierenden Faktor des Ansatzes stellen in der Praxis fehlerhafte oder unvollständige EM-Modelle dar. Mit der vorgestellten Methodik ist somit die Möglichkeit gegeben, die Bedeckungsgrade quantitativ und automatisiert im Subpixelbereich zu erfassen.
Infrared photodissociation spectroscopy of ionic hydrocarbons : microsolvation and protonation sites
(2007)
This work has presented a spectroscopic analysis of three types of hydrocarbon cations: two ionized aromatic hydrocarbons, two protonated aromatic hydrocarbons and the cation of a fundamental radical hydrocarbon. The experiments were centered on the proton stretch vibrations of mass-selected complexes of these systems and polar (H2O) and non polar (Ar, N2, CO2) ligands. The experiments have been done in a tandem mass spectrometer coupled with an electron impact ionization ion source; an OPO laser system was used as tunable IR light source. All the proposed dimer structures have been also modeled using quantum chemical calculations (QCC). These calculations have consistently been matched with the experimental results and have enabled clear identification of the spectral features observed. This has enabled the evaluation of thermochemical properties which could not be extracted directly from experiment. The experiments done on complexes of 1-Np+ and Im+ have allowed for the acidity of their various groups to be probed: the shifts in the frequency as well as the enhancement in the intensity of the OH and NH stretch vibrations resulting from the complexation have yielded dependences on both the species (L) and the number (n) of the ligands. OH bound 1-Np+···Ar has been detected for the first time, showing that the REMPI-IRPD method is severely limited with respect to the production of the most stable isomer of a given cationic complex. The detection of c-1-Np+···(N2)n corresponds to the first observation of c-1-Np+ complexes and enables thus direct comparison of both 1-Np+ rotamers. The shift of the NH vibration of Im+···N2(H) yielded the first experimental estimate for the PA of the imidazyl radical. It was also found that the most stable 1-Np+···Ar and Im+···Ar structures differ qualitatively from that of the corresponding neutral dimers (H-bound vs pi-bound), emphasizing the large impact of ionization on the interaction potential and the preferred recognition motif between acidic aromatic molecules (A) and nonpolar ligands. The IRPD spectra of 1-Np+···Ln and Im+···Ln yielded spectroscopic information about the CH, NH and OH stretch vibrations of bare 1-Np+ and Im+. The dependence of the shifts in the frequency of the OH and NH stretch vibrations allows for creating microsolvation models. The spectroscopic results obtained on size-selected 1-NpH+···Ln show that, in the output of the presently used ion source, three classes of 1-NpH+ isomers can be identified: oxonium ions (1-Np protonated at the O atom); carbenium ions obtained by protonation in the para and ortho positions with respect to the OH functional group; carbenium ions obtained by the addition of a proton to well-defined sites on the second naphthalene ring. The spectral identification of these three classes of protonation sites is supported by their different photofragmentation patterns. It was demonstrated that the spectroscopic monitoring of the microsolvation of ImH+ in Ar and N2 together with the QCCs paint a very detailed picture of the microsolvation process, evidencing clear differences between the microsolvation models as function of the PA of the ligands. Important differences have also been identified between the various binding sites, enabling the creation of a clear scale of priorities for occupation of the binding sites during microsolvation. The application of IRPD to the study of microhydrated ImH+ provided for the first time direct spectroscopic information on the properties of the N-H bonds of this biomolecular building block under controlled microhydration. It was demonstrated that, as protonation enhances the acidity of the NH groups, the ability for proton conductivity of ImH+ increases. A very important result is derived from the IRPD spectroscopy of C2H5+···L (L = Ar, N2, CO2, CH4) dimers. The equilibrium geometry of the C2H5+ has long been debated. Now, IRPD spectra were recorded over the range of the CH stretch fundamentals (covering possible sp3 and sp2 hybridization of C). Depending on the ligand species, the spectra are found to be dominated by the fingerprint of two largely different dimer geometries. Using the experimental C2H5+···Ar spectrum and the corresponding QCCs, the structure of the (weakly perturbed) C2H5+ was found to be the nonclassical one, with one proton straddling across the C=C bond of the H2C=CH2. On the other hand, ligands like N2 and CH4 are strongly influencing the geometry, as seen in the spectral signatures of the C2H5+···N2 and C2H5+···CH4, which correspond to the classical [H2CCH3]+. It was thus demonstrated that while the nonclassical C2H5+ is the global minimum on the PES of the free [C2,H5]+, the structure of the C2H5+ can be strongly influenced by the chemical properties of the environment.
The goal of the work presented in this thesis was to explore the possibilities and limitations of MRI / MRS using an ultra high field of 17.6 tesla. A broad range of specific applications and MR methods, from MRI to MRSI and MRS were investigated. The main foci were on sodium magnetic resonance spectroscopic imaging of rodents, magnetic resonance spectroscopy of the mouse brain, and the detection of small amounts of iron labeled stem cells in the rat brain using MRI Sodium spectroscopic imaging was explored since it benefits tremendously from the high magnetic field. Due to the intrinsically low signal in vivo, originating from the low concentrations and short transverse relaxation times, only limited results have been achieved by other researchers until now. Results in the literature include studies conducted on large animals such as dogs to animals as small as rats. No studies performed on mice have been reported, despite the fact that the mouse is the most important laboratory animal due to the ready availability of transgenic strains. Hence, this study concentrated on sodium MRSI of small rodents, mostly mice (brain, heart, and kidney), and in the case of the brain on young rats. The second part of this work concentrated on proton magnetic resonance spectroscopy of the rodent brain. Due to the high magnetic field strength not only the increasing signal but also the extended spectral resolution was advantageous for such kind of studies. The difficulties/limitations of ultra high field MRS were also investigated. In the last part of the presented work detection limits of iron labeled stem cells in vivo using magnetic resonance imaging were explored. The studies provided very useful benchmarks for future researchers in terms of the number of labeled stem cells that are required for high-field MRI studies. Overall this work has shown many of the benefits and the areas that need special attention of ultra high fields in MR. Three topics in MRI, MRS and MRSI were presented in detail. Although there are significant additional difficulties that have to be overcome compared to lower frequencies, none of the work presented here would have been possible at lower field strengths.
Contents List of Publications 1 Introduction 2 Basic concepts and instrumentation 2.1 Mathematical description of femtosecond laser pulses 2.2 Optical quantities and measurements 2.2.1 Intensity 2.2.2 Absorbance and Beer-Lambert law 2.3 Laser system 2.4 General software framework for scientific data acquisition and simulation 2.4.1 Core components 2.4.2 Program for executing a single measurement sequence 2.4.3 Scan program 2.4.4 Evolutionary algorithm optimization program 2.4.5 Applications of the software framework 2.5 Summary 3 Generation of ultrabroadband femtosecond pulses in the visible 3.1 Nonlinear optics 3.1.1 Nonlinear polarization and frequency conversion 3.1.2 Phase matching 3.2 Optical parametric amplification 3.3 Noncollinear optical parametric amplifier 3.4 Considerations and experimental design of NOPA 3.4.1 Options for broadening the NOPA bandwidth 3.4.2 Experimental setup 3.5 NOPA pulse characterization 3.5.1 Second harmonic generation frequency-resolved optical gating 3.5.2 Transient grating frequency-resolved optical gating 3.6 Compression and shaping methods for NOPA pulses 3.6.1 Grating compressor 3.6.2 Prism compressor 3.6.3 Chirped mirrors 3.6.4 Detuned zero dispersion compressor 3.6.5 Deformable mirror pulse shaper 3.6.6 Liquid crystal pulse shaper 3.7 Liquid crystal pulse shaper 3.7.1 Femtosecond pulse shapers 3.7.2 Experimental design and parameters 3.7.3 Optical setup of the LC pulse shaper 3.7.4 Calibrations of the pulse shaper 3.8 Adaptive pulse compression 3.8.1 Closed loop pulse compression 3.8.2 Open loop pulse compression 3.9 Conclusions 4 Coherent optical two-dimensional spectroscopy 4.1 Introduction 4.2 Theory of third order nonlinear optical spectroscopies 4.2.1 Response function, electric fields, and signal field 4.2.2 Signal detection with spectral interferometry 4.2.3 Evaluation of two-dimensional spectra and phasing 4.2.4 Selection and classification of terms in induced nonlinear polarization 4.2.5 Oscillatory character of measured signal 4.3 Previous experimental implementations 4.4 Inherently phase-stable setup using conventional optics only 4.4.1 Manipulation of pulse pairs as a basis for stability 4.4.2 Experimental setup 4.4.3 Measurement procedure 4.4.4 Data evaluation 4.5 First experimental results 4.5.1 Demonstration of phase stability 4.5.2 2D spectrum of Nile Blue at room temperature 4.6 Summary and outlook 5 Product accumulation for ultrasensitive femtochemistry 5.1 The problem of sensitivity in femtochemistry 5.2 Accumulation for increased sensitivity 5.2.1 Comparison of conventional and accumulative sensitivity 5.2.2 Schematics and illustrative example 5.3 Experimental setup 5.4 Calibration and modeling of accumulation 5.5 Experiments on indocyanine green 5.5.1 Calibration of the setup 5.5.2 Chirped pulse excitation 5.5.3 Adaptive pulse shaping 5.6 Conclusions 6 Ultrafast photoconversion of the green fluorescent protein 6.1 Green fluorescent protein 6.2 Experimental setup for photoconversion of GFP 6.3 Calibration of the setup for GFP 6.3.1 Model for concentration dynamics of involved GFP species 6.3.2 Estimate of sensitivity 6.4 Excitation power study 6.5 Time-resolved two-color experiment 6.6 Time-delayed unshaped 400 nm – shaped 800 nm pulse excitation 6.6.1 Inducing photoconversion with chirped pulses 6.6.2 Photoconversion using third order phase pulses 6.7 Conclusions 7 Applications of the accumulative method to chiral systems 7.1 Introduction 7.2 Chiral asymmetric photochemistry 7.2.1 Continuous-wave circularly polarized light 7.2.2 Controlled asymmetric photochemistry using femtosecond laser pulses 7.3 Sensitive and fast polarimeter 7.3.1 Polarimeter setup 7.3.2 Detected signal I(t) 7.3.3 Angular amplification 7.3.4 Performance of the polarimeter 7.4 Molecular systems and mechanisms for enantioselective quantum control 7.4.1 Binaphthalene derivatives 7.4.2 Photochemical helicene formation 7.4.3 Spiropyran/merocyanine chiroptical molecular switches 7.5 Summary 8 Summary Zusammenfassung Bibliography Acknowledgements