Refine
Has Fulltext
- yes (356)
Is part of the Bibliography
- yes (356)
Year of publication
Document Type
- Journal article (255)
- Doctoral Thesis (71)
- Preprint (30)
Language
- English (356) (remove)
Keywords
- Anorganische Chemie (64)
- boron (55)
- Boron (16)
- diborenes (15)
- borylation (14)
- luminescence (13)
- fluorescence (12)
- inorganic chemistry (12)
- structure elucidation (10)
- Chemie (9)
Institute
- Institut für Anorganische Chemie (356) (remove)
Sonstige beteiligte Institutionen
- Fraunhofer Insitut für Silicatforschung ISC (1)
- Fraunhofer-Institut für Chemische Technologie (ICT) (1)
- Institut Ruđer Bošković, Zagreb, Croatia (1)
- Institut für Organische Chemie, RWTH Aachen (1)
- Institute for Sustainable Chemistry & Catalysis with Boron (1)
- Institute of Transformative Bio-Molecules, Nagoya University, Nagoya, Japan (1)
- Paul Scherrer Institut (1)
- The Chinese University of Hong Kong (1)
- The University of Sussex (1)
- Université de Bordeaux, Bordeaux, France (1)
Based on the strand‐like coordination polymer (CP) type \(^{1}\)\(_{∞}\)[Ln(BSB)\(_{3}\)(py)\(_{2}\)], [BSB]−=bis‐salicylatoborate anion, mixed Eu/Tb‐containing compounds of the constitution \(^{1}\)\(_{∞}\)[Eu\(_{x}\)Tb\(_{1-x}\)(BSB)\(_{3}\)(py)\(_{2}\)] were synthesised ionothermally for a phase width of (x=0.25–0.75) and characterized regarding structure and optical properties. Previously, known only for other lanthanides, the mixed 1D−Eu/Tb‐CPs show excellent options for statistic replacement of the Ln‐cations during synthesis yielding solid solutions. The products are highly luminescent, with the chromaticity being a direct function of the amount of the respective Ln‐ions. Corresponding to an overall addition of emission intensities, the green Tb\(^{3+}\) emission and the red Eu\(^{3+}\) emission allow for a chromaticity control that also includes yellow emission. Control of the luminescence colour renders them suitable examples of the versatility of statistic replacement of metal ions in coordination chemistry. In addition, crystallization of [EMIm]\(_{2}\)[YCl\(_{5}\)(py)] illuminates possible other products of the ionothermal reactions of [EMIm][BSB] with LnCl\(_{3}\) constituted by components not being part of the main CPs.
Herein, the copper-catalyzed borylation of readily available acyl chlorides with bis(pinacolato)diboron, (B\(_{2}\)pin\(_{2}\)) or bis(neopentane glycolato)diboron (B\(_{2}\)neop\(_{2}\)) is reported, which provides stable potassium acyltrifluoroborates (KATs) in good yields from the acylboronate esters. A variety of functional groups are tolerated under the mild reaction conditions (room temperature) and substrates containing different carbon-skeletons, such as aryl, heteroaryl and primary, secondary, tertiary alkyl are applicable. Acyl N-methyliminodiacetic acid (MIDA) boronates can also been accessed by modification of the workup procedures. This process is scalable and also amenable to the late-stage conversion of carboxylic acid-containing drugs into their acylboron analogues, which have been challenging to prepare previously. A catalytic mechanism is proposed based on in situ monitoring of the reaction between p-toluoyl chloride and an NHC-copper(I) boryl complex as well as the isolation of an unusual lithium acylBpinOBpin compound as a key intermediate.
In this communication, we demonstrate a novel approach to prepare a discrete dimer of chiral phthalocyanine (Pc) by exploiting the flexible molecular geometry of helicenes, which enables structural interlocking and strong aggregation tendency of Pcs. Synthesized [7]helicene-Pc hybrid molecular structure, zinc-[7]helicenocyanine (Zn-7HPc), exclusively forms a stable dimeric pair consisting of two homochiral molecules. The dimerization constants were estimated to be as high as 8.96×10\(^6\) M\(^{−1}\) and 3.42×107 M\(^{−1}\) in THF and DMSO, respectively, indicating remarkable stability of dimer. In addition, Zn\(^{-7}\)HPc exhibited chiral self-sorting behavior, which resulted in preferential formation of a homochiral dimer also in the racemic sample. Two phthalocyanine subunits in the dimeric form strongly communicate with each other as revealed by a large comproportionation constant and observation of an IV-CT band for the thermodynamically stable mixed-valence state.
Herein, we report the facile synthesis of a three-dimensional (3D) inorganic analogue of 9,10-diazido-9,10-dihydrodiboraantracene, which turned out to be a monomer in both the solid and solution state, and thermally stable up to 230 °C, representing a rare example of azido borane with boosted Lewis acidity and stability in one. Apart from the classical acid-base and Staudinger reactions, E−H bond activation (E=B, Si, Ge) was investigated. While the reaction with B−H (9-borabicyclo[3.3.1]nonane) led directly to the 1,1-addition on N\(_{α}\) upon N\(_{2}\) elimination, the Si−H (Et\(_{3}\)SiH, PhMe\(_{2}\)SiH) activation proceeded stepwise via 1,2-addition, with the key intermediates 5\(_{int}\) and 6\(_{int}\) being isolated and characterized. In contrast, the cooperative Ge−H was reversible and stayed at the 1,2-addition step.
The 1,3-bis(tricyanoborane)imidazolate anion 1 was obtained in high yield from lithium imidazolate and B(CN)\(_3\)−pyridine adduct. Anion 1 is chemically very robust and thus allowed the isolation of the corresponding H\(_5\)O\(_2\)\(^+\) salt. Furthermore, monoanion 1 served as starting species for the novel dianionic N-heterocyclic carbene (NHC), 1,3-bis(tricyanoborane)imidazoline-2-ylidenate anion 3 that acts as ditopic ligand via the carbene center and the cyano groups at boron. First reactions of this new NHC 3 with methyl iodide, elemental selenium, and [Ni(CO)\(_4\)] led to the methylated imidazolate ion 4, the dianionic selenium adduct 5, and the dianionic nickel tricarbonyl complex 6. These NHC derivatives provide a first insight into the electronic and steric properties of the dianionic NHC 3. Especially the combination of properties, such as double negative charge, different coordination sites, large buried volume and good σ-donor and π-acceptor ability, make NHC 3 a unique and promising ligand and building block.
The 1‐methyl‐3‐(tricyanoborane)imidazolin‐2‐ylidenate anion (2) was obtained in high yield by deprotonation of the B(CN)3‐methylimidazole adduct 1. Regarding charge and stereo‐electronic properties, anion 2 closes the gap between well‐known neutral NHCs and the ditopic dianionic NHC, the 1,3‐bis(tricyanoborane)imidazolin‐2‐ylidenate dianion (IIb). The influence of the number of N‐bonded tricyanoborane moieties on the σ‐donating and π‐accepting properties of NHCs was assessed by quantum chemical calculations and verified by experimental data on 2, IIb, and 1,3‐dimethylimidazolin‐2‐ylidene (IMe, IIa). Therefore NHC 2, which acts as a ditopic ligand via the carbene center and the cyano groups, was reacted with alkyl iodides, selenium, and [Ni(CO)\(_{4}\)] yielding alkylated imidazoles 3 and 4, the anionic selenium adduct 5, and the anionic nickel tricarbonyl complex 8, respectively. The results of this study prove that charge, number of coordination sites, buried volume (%V\(_{bur}\)) and σ‐donor and π‐acceptor abilities of NHCs can be effectively fine‐tuned via the number of tricyanoborane substituents.
N-heterocyclic carbenes (NHC) are utilized for the stabilization of reactive compounds, for the activation of strong bonds, and as ligands in transition metal chemistry. In contrast to neutral NHCs, few examples of anionic or even dianionic NHCs are known. One approach for the synthesis of anionic carbenes is the deprotonation of neutral or anionic precursors, bearing Lewis acids instead of alkyl or aryl substituents. Following this strategy, novel anionic and dianionic NHCs, featuring weakly coordinating fluorinated borane and phosphorane substituents or coordinating tricyanoborane substituents were synthesized within the scope of this thesis. These carbenes possess unprecedented stabilities compared to related species. Furthermore, their electronic and steric properties can be directly adjusted by the type of Lewis acid attached. Their potential as ligands with highly shielding weakly coordinating substituents next to the carbene coordination center was demonstrated by the syntheses of the respective NHC selenium adducts and NHC gold(I) complexes. In contrast anionic NHCs with coordinating tricyanoborane moieties have an outstanding potential as ditopic ligands with coordination being possible at the carbene center and via the cyano groups. Their beneficial ligand properties were demonstrated by the syntheses of the respective NHC selenium adducts and NHC nickeltricarbonyl complexes. The combination of electronic properties, the large buried volume, the negative charge, the possibility to act as ditopic or ligands with weakly coordinating groups, and the ease of accessibility render borane- and phosphorane functionalized NHCs unique novel ligands. A further project of this PhD thesis deals with the steric properties of Lewis acids. Therefore, an easy-to-apply model was designed to quantify the steric demand of Lewis acids. Using the results of this evaluation, a second model was developed which judges the steric repulsion in Lewis acid/base adduct formation for arbitrary sets of acids and bases.
Synthesis and Investigation of Borylene Complexes: from Borylene Transfer to Borylene Catenation
(2012)
Within the scope of this thesis, the area of borylene transfer has been broadened by including transition-metal alkynyl complexes and metal-carbon double bonds as borylene acceptors. In addition to double salt elimination, halide abstraction and dehydrogenation processes, a novel high-yield synthetic procedure for terminal borylene complexes was established, i.e. salt elimination and subsequent silylhalogenide liberation. Accordingly, it was possible to prepare [(OC)3(Me3P)Fe=BDur] as a rare example of a neutral arylborylene species. Moreover, this compound has been demonstrated to possess great potential for metathesis reactions and the functionalization of polycyclic aromatic hydrocarbons such as naphthalene. Moreover, it could undergo a phosphine-borylene exchange reaction, yielding the iron bis(borylene) complex [(OC)3Fe(BDur){BN(SiMe3)2}], which has turned out to be applicable for preparation of 1,4-diboracyclohexadiene and unprecedented 1,4-dibora-1,3-butadiene complexes, thus establishing a new type of borylene transfer. Most interestingly, upon transfer of further borylene moieties into the coordination sphere of iron, borylene-catenation was accomplished in a highly controlled manner.
Anionic Adducts
Sp2-sp3 tetraalkoxy diboron compounds have gained attention due to the development of new, synthetically useful catalytic reactions either with or without transition-metals. Lewis-base adducts of the diboron(4) compounds were suggested as possible intermediates in Cu catalyzed borylation reactions some time ago. However, intermolecular adducts of tetraalkoxy diboron compounds have not been studied yet in great detail. In preliminary studies, we have synthesized a series of anionic sp2-sp3 adducts of B2pin2 with alkoxy-groups (L = [OMe]–, [OtBu]–), a phenoxy-group (L = [4-tBuC6H4O]–) and fluoride (L = [F]–, with [nBu4N]+ as the counter ion) as Lewis-bases.
Neutral Adducts
Since their isolation and characterization, applications of N-heterocyclic carbenes (NHCs) and related molecules, e.g., cyclic alkylaminocarbenes (CAACs) and acyclic diaminocarbenes (aDCs), have grown rapidly. Their use as ligands in homogeneous catalysis and directly in organocatalysis, including recently developed borylation reactions, is now well established. Recently, several examples of ring expansion reactions (RER) involving NHCs were reported to take place at elevated temperatures, involving Be, B, and Si.
Furthermore, preliminary studies in the group of Marder et al. showed the presence of neutral sp2-sp3 diboron compounds with B2pin2 and the NHC Cy2Im. In this work, we focused on the synthesis and characterization of further neutral sp2-sp3 as well as sp3-sp3 diboron adducts with B2cat2 and B2neop2 and different NHCs. Whereas the mono-NHC adduct is stable for several hours at temperatures up to 60 °C, the bis-NHC adducts undergo thermally induced rearrangement to form the ring expanded products compound 26 and 27. B2neop2 is much more reactive than B2cat2 giving ring expanded product 29 at room temperature in quantitative yields, demonstrating that NHC ring expansion and B–B bond cleavage can be very facile processes.
Whereas the mono-NHC adduct is stable for several hours at temperatures up to 60 °C, the bis-NHC adducts undergo thermally induced rearrangement to form the ring expanded products compound 26 and 27. B2neop2 is much more reactive than B2cat2 giving ring expanded product 29 at room temperature in quantitative yields, demonstrating that NHC ring expansion and B–B bond cleavage can be very facile processes.
Boric acid (BA) has been used as a transparent glass matrix for optical materials for over 100 years. However, recently, apparent room-temperature phosphorescence (RTP) from BA (crystalline and powder states) was reported (Zheng et al., Angew. Chem. Int. Ed. 2021, 60, 9500) when irradiated at 280 nm under ambient conditions. We suspected that RTP from their BA sample was induced by an unidentified impurity. Our experimental results show that pure BA synthesized from B(OMe)\(_{3}\) does not luminesce in the solid state when irradiated at 250–400 nm, while commercial BA indeed (faintly) luminesces. Our theoretical calculations show that neither individual BA molecules nor aggregates would absorb light at >175 nm, and we observe no absorption of solid pure BA experimentally at >200 nm. Therefore, it is not possible for pure BA to be excited at >250 nm even in the solid state. Thus, pure BA does not display RTP, whereas trace impurities can induce RTP.
Persistent room-temperature phosphorence from purely organic molecules and multi-component systems
(2021)
Recently, luminophores showing efficient room-temperature phosphorescence (RTP) have gained tremendous interest due to their numerous applications. However, most phosphors are derived from transition metal complexes because of their intrinsic fast intersystem crossing (ISC) induced by strong spin–orbit coupling (SOC) constants of the heavy metal.
Metal-free RTP materials are rare and have become a promising field because they are inexpensive and environmentally friendly. This review summarizes organic molecular materials with long triplet lifetimes at room temperature from the perspective of whether they stem from a molecular or multi-component system. Among purely organic phosphors, heteroatoms are usually introduced into the backbone in order to boost the singlet–triplet ISC rate constant.
In multi-component systems, useful strategies such as host–guest, polymer matrix, copolymerization, and supramolecular assembly provide a rigid matrix to restrict nonradiative pathways thus realizing ultralong RTP.
Designing highly efficient purely organic phosphors at room temperature remains a challenge because of fast non-radiative processes and slow intersystem crossing (ISC) rates. The majority of them emit only single component phosphorescence. Herein, we have prepared 3 isomers (o, m, p-bromophenyl)-bis(2,6-dimethylphenyl)boranes. Among the 3 isomers (o-, m- and p-BrTAB) synthesized, the ortho-one is the only one which shows dual phosphorescence, with a short lifetime of 0.8 ms and a long lifetime of 234 ms in the crystalline state at room temperature. Based on theoretical calculations and crystal structure analysis of o-BrTAB, the short lifetime component is ascribed to the T\(^M_1\) state of the monomer which emits the higher energy phosphorescence. The long-lived, lower energy phosphorescence emission is attributed to the T\(^A_1\) state of an aggregate, with multiple intermolecular interactions existing in crystalline o-BrTAB inhibiting nonradiative decay and stabilizing the triplet states efficiently.
Persistent room temperature phosphorescent (RTP) luminophores have gained remarkable interest recently for a number of applications in security printing, OLEDs, optical storage, time-gated biological imaging and oxygen sensors. We report the first persistent RTP with lifetimes up to 0.5 s from simple triarylboranes which have no lone pairs. We also have prepared 3 isomeric (o, m, p-bromophenyl)-bis(2,6-dimethylphenyl)boranes. Among the 3 isomers (o-, m- and p-BrTAB) synthesized, the ortho-one is the only one which shows dual phosphorescence, with a short lifetime of 0.8 ms and a long lifetime of 234 ms in the crystalline state at room temperature. At last, we checked the RTP properties from the boric acid. We found that the pure boric acid does not show RTP in the solid state.
A cyclic alkyl(amino)carbene (CAAC)‐stabilized dicoordinate aminoborylene is synthesized by the twofold reduction of a [(CAAC)BCl\(_{2}\)(TMP)] (TMP=2,6‐tetramethylpiperidyl) precursor. NMR‐spectroscopic, X‐ray crystallographic and computational analyses confirm the cumulenic nature of the central C=B=N moiety. Irradiation of [(CAAC)B(TMP)] (2) resulted in an intramolecular C−C bond activation, leading to a doubly‐fused C\(_{10}\)BN heterocycle, while the reaction with acetonitrile resulted in an aryl migration from the CAAC to the acetonitrile nitrogen atom, concomitant with tautomerization of the latter to a boron‐bound allylamino ligand. One‐electron oxidation of 2 with CuX (X=Cl, Br) afforded the corresponding amino(halo)boryl radicals, which were characterized by EPR spectroscopy and DFT calculations. Placing 2 under an atmosphere of CO afforded the tricoordinate (CAAC,CO)‐stabilized aminoborylene. Finally, the twofold oxidation of 2 with chalcogens led, in the case of N\(_{2}\)O and sulfur, to the splitting of the B−C\(_{CAAC}\) bond and formation of the 2,4‐diamino‐1,3,2,4‐dichalcogenadiboretanes and CAAC‐chalcogen adducts, whereas with selenium a monomeric boraselenone was isolated, which showed some degree of B−Se multiple bonding.
The solvatochromic behavior of two donor-π bridge-acceptor (D-π-A) compounds based on the 2-(3-boryl-2-thienyl)thiazole π-linker and indandione acceptor moiety are investigated. DFT/TD-DFT calculations were performed in combination with steady-state absorption and emission measurements, along with electrochemical studies, to elucidate the effect of two different strongly electron-donating hydrazonyl units on the solvatochromic and fluorescence behavior of these compounds. The Lippert–Mataga equation was used to estimate the change in dipole moments (Δµ) between ground and excited states based on the measured spectroscopic properties in solvents of varying polarity with the data being supported by theoretical studies. The two asymmetrical D-π-A molecules feature strong solvatochromic shifts in fluorescence of up to ~4300 cm\(^{−1}\) and a concomitant change of the emission color from yellow to red. These changes were accompanied by an increase in Stokes shift to reach values as large as ~5700–5800 cm\(^{−1}\). Quantum yields of ca. 0.75 could be observed for the N,N-dimethylhydrazonyl derivative in nonpolar solvents, which gradually decreased along with increasing solvent polarity, as opposed to the consistently reduced values obtained for the N,N-diphenylhydrazonyl derivative of up to ca. 0.20 in nonpolar solvents. These two push–pull molecules are contrasted with a structurally similar acceptor-π bridge-acceptor (A-π-A) compound.
The development of ligands capable of effectively stabilizing highly reactive main‐group species has led to the experimental realization of a variety of systems with fascinating properties. In this work, we computationally investigate the electronic, structural, energetic, and bonding features of proximity‐enforced group 13–15 homodimers stabilized by a rigid expanded pincer ligand based on the 1,8‐naphthyridine (napy) core. We show that the redox‐active naphthyridine diimine (NDI) ligand enables a wide variety of structural motifs and element‐element interaction modes, the latter ranging from isolated, element‐centered lone pairs (e.g., E = Si, Ge) to cases where through‐space π bonds (E = Pb), element‐element multiple bonds (E = P, As) and biradical ground states (E = N) are observed. Our results hint at the feasibility of NDI‐E2 species as viable synthetic targets, highlighting the versatility and potential applications of napy‐based ligands in main‐group chemistry.
Among the parent borirane, benzoborirene and ortho‐dicarbadodecaborane‐fused borirane, the latter possesses the highest ring strain and the highest Lewis acidity according to our density functional theory (DFT) studies. The synthesis of this class of compounds is thus considerably challenging. The existing examples require either a strong π‐donating group or an extra ligand for B‐coordination, which nevertheless suppresses or completely turns off the Lewis acidity. The title compound, which possesses both features, not only allows the 1,2‐insertion of P=O, C=O or C≡N to proceed under milder conditions, but also enables the heretofore unknown dearomative 1,4‐insertion of Ar−(C=O)− into a B−C bond. The fusion of strained molecular systems to an o‐carborane cage shows great promise for boosting both the ring strain and acidity.
Upon complexation to CuOTf, a PMe\(_3\)-stabilized bis(9-anthryl) diborene slowly undergoes an intramolecular hydroarylation reaction at room temperature. Subsequent triflation of the B–H bond with CuOTf, followed by a PMe\(_3\) transfer, finally yields a cyclic sp\(^2\)-sp\(^3\) boryl-substituted boronium triflate salt.
Despite the prevalence of stable π-complexes of most d\(^{10}\) metals, such as Cu(I) and Ni(0), with ethylene and other olefins, complexation of d\(^{10}\) Zn(II) to simple olefins is too weak to form isolable complexes due to the metal ion's limited capacity for π-backdonation. By employing more strongly donating π- ligands, namely neutral diborenes with a high-lying π(B=B) or- bital, monomeric 16-electron M(II)-diborene (M = Zn, Cd) π- complexes were synthesized in good yields. Metal–B2 π- interactions in both the solid and solution state were confirmed by single-crystal X-ray analyses and their solution NMR and UV-vis absorption spectroscopy, respectively. The M(II) centers adopt a trigonal planar geometry and interact almost symmetrically with both boron atoms. The MB2 planes significantly twist out of the MX\(_2\) planes about the M-centroid(B–B) vector, with angles rang- ing from 47.0° to 85.5°, depending on the steric interactions be- tween the diborene ligand and the MX\(_2\) fragment.
The diborene 1 was synthesized by reduction of a mixture of 1,2-di-9-anthryl-1,2-dibromodiborane(4) (6) and trimethylphosphine with potassium graphite. The X-ray structure of 1 shows the two anthryl rings to be parallel and their π(C\(_{14}\)) systems perpendicular to the diborene π(B=B) system. This twisted conformation allows for intercalation of the relatively high-lying π(B=B) orbital and the low-lying π* orbital of the anthryl moiety with no significant conjugation, resulting in a small HOMO-LUMO gap (HLG) and ultimately an unprecedented anthryl B–B bond hydroarylation. The HLG of 1 was estimated to be 1.57 eV from the onset of the long wavelength band in its UV–vis absorption spectrum (THF, λ\(_{onset}\) = 788 nm). The oxidation of 1 with elemental selenium afforded diboraselenirane 8 in quantitative yield. By oxidative abstraction of one phosphine ligand by another equivalent of elemental selenium, the B–B and C\(^1\)–H bonds of 8 were cleaved to give the cyclic 1,9-diboraanthracene 9.
Priority task of the thesis was to replace oxygen atoms in sulfur oxoanions SOnm– or imido groups in sulfur polyimido anions S(NR)nm– isoelectronically by R2C-methylene groups. This would open a wide avenue to new target molecules containing a formally double bonded carbon next to formally double bonded nitrogen atoms in highly charged sulfur-centred anions like S(CR2)x(NR)ym–. They clearly are reminiscent to sulfur ylides. Both, alkylendiimidosulfites and alkylentriimidosulfates are accessible via deprotonaton of the corresponding alkyldiimidosulfinates and alkyltriimidosulfonates with methyllithium. The reactivity of the novel compounds is dominated by the carbanionic centre. Addition reactions to another SN formal doubble bond are feasible and are leading to the yet unknown imidoanalogues compounds alkyl-bis-(diimidosulfinates) and alkyl-bis-(triimidosulfonates).
l In an attempt to assess the structural requirements for the musearlnie receptor selectivity of hexahydro-diphenidol (hexahydro-difenidol) and hexahydro-sila-diphenidol (hexahydro-sila-difenidol), a serles of structurally related C/Si pairs were investigated, along with atropine, pirenzepine and methoctramine, for their binding affinities in NB-OK 1 cells as well as in rat heart and pancreas. 2 The action of these antagonists at musearlnie receptors mediating negative inotropic responses in guinea-pig atrla and ileal contractions has also been assessed. 3 Antagonist binding data indicated that NB-OK 1 cells (M\(_1\) type) as weil as rat heart (cardiac type) and pancreas (glandularjsmooth muscle type) possess different muscarinic receptor subtypes. 4 A highly significant correlation was found between the binding affinities of the antagonists to muscarinic receptors in rat heart and pancreas, respectively, and the affinities to muscarinic receptors in guinea-pig atria and ileum. This implies that the musearlnie binding sites in rat heart and the receptors in guinea-pig atrla are essentially similar, but different from those in pancreas and ileum. 5 The antimuscarinic potency of hexahydro-diphenidol and hexahydro-sila-diphenidol at the three subtypes was inftuenced differently by structural modifications (e.g. quaternization). Different selectivity profiles for the antagonists were obtained, which makes these compounds useful tools to investigate further muscarinic receptor heterogeneity. lndeed, the tertiary analogues hexahydrodiphenidol (HHD) and hexahydro-sila-diphenidol (HHSiD) bad an M\(_1\) = glandularjsmooth muscle > cardiac selectivity profile, whereas the quaternary analogues HHD methiodide and HHSiD methiodide were M\(_1\) preferring (M\(_1\) > glandularjsmooth muscle, cardiac).
Wc invcstigatcd thc binding properlies of thc (R)- and (Sl-cnantiomcrs of thc muscarinic antagonists trihcxyphcnidyl, procyclidinc, hcxahydro-difcnidol. p-fluoro-hcxahydro-difcnidol. hcxbutinol, p-fluoro-hcxbutinnl. and thcir corrcsponding methiodidcs at muscarinic M\(_1\), M\(_2\)• M\(_3\) and M\(_4\) receptor subtypes. In addition. binding properlies of thc (R)- and (S)-cnantiomcrs of oxyphcncycliminc wcrc studicd. The {R)- cnantiomcrs (cutomcrs} of all the compounds had a grcatcr affinity than the (S)-isomcrs for thc four muscarinic rcccptor subtypcs. Thc binding pattcrns of thc (R)- and (S)-enantiomers wcrc gcncrally different. We did not obscrvc any gcncral corrclation hctwccn thc potcncy of thc high-affinity enantiomer and Lhc affinity ratio (cudismic ratio) of the two cnantiomcrs. Thc rcsuhs arc discusscd in tcrms of a 'four suhsitcs' binding modcl.
Hexahydro-sila-difenidoJ and eight analogues behaved as simple cumpetitive inhibitors of eHJN·methyl·scopoJamine binding to homogenates frorn human neuroblastoma NB-OK 1 cells (M\(_1\) sites), rat heart (M\(_2\) sites), rat pancreas (M\(_3\) sites), and rat striatum 'B' sites (M\(_4\) sites). Pyrrolidino- and hexamethyleneimino analogues showed the same sekctivity profile as the parent compound. Hexahydro-sila-difenidol methiodide and the methiodide of p-fluoro-hexahydro·sila-difenidol had a fügher affinity but a lower selectivity than the tertiary amines. Compounds containing a p·methoxy, p-chJoro or p-fluoro substituent in the phenyl ring of hexahydro-sila-difenidol showed a qualitative)y similar selectivity profile as the parent compound (i.e., M\(_1\)= M\(_3\) = M\(_4\) >M\(_2\) ), but up to 16-fold lower affinities. o-Methoxy-hexahydro-sila-difenidol has a lower affinity than hexahydro-sila-difeni.:!o! at the four binding sites. lts selectivity profile (M\(_4\) > M\(_1\), M\(_3\) > M\(_2\) ) was different from hexahydro-sila-difenidol. Replacement of the centrat silicon atom of hexahydro-sila-difenidol, p-fluoro-hexahydro-sila-difenidol and thdr quatemary (N-methylated) analogues by a carbon atom did not change their binding affinities significantly. The iour muscarinic receptors showed a higher affinity for the (R)- than for the (S)-enantiomers of hexahydro-difenidol, p-fluorohexahydro-difenidol and their methiodides. The stereoselectivity varied depending on the receptor subtype and drug considered.
(R)-Hexahydro-difenidol has a higher affinity for M\(_1\) receptors in NB-OK 1 cells, pancreas M\(_3\) and striatum M\(_4\) receptors (pKi 7.9 to 8.3) than for cardiac M2 receptors (pKi 7 .0). (8)-Hexahydro-difenidol, by contrast, is nonselective (pKi 5.8 to 6.1). Our goal in the present study was to evaluate the importance ofthe hydrophobic phenyl, and cyclohexyl rings of hexahydro-difenidol for the stereoselectivity and reeeptor selectivity of hexahydro-difenidol binding to the four muscarinic receptors. Our results indieated that replacement of the phenyl ring of hexahydro-difenidol by a cyclohexyl group <~ dicyclidol) and ofthe cyclohexyl ring by a phenyl moiety <~ difenidol) indueed a !arge (4- to 80-fold) decrease in binding affinity for all musearlnie receptors. Difenidol had a signifieant preference for M\(_1\) , M\(_3\) , and M\(_4\) over M\(_2\) receptors; dicyclidol, by eontrast, had a greater affinity for M\(_1\) and M\(_4\) than for M\(_2\) and M\(_3\) receptors. The binding free energy deerease due to replacement ofthe phenyl and the cyelohexyl groups of(R)-hexahydro-difenidol by, respectively, a eyclohexyl and a phenyl moiety was almostadditive in the ease of M\(_4\) (striatum) binding sites. In the ease ofthe cardiac M\(_2\), pancreatic M\(_3\) , or NB-OK 1 M\(_1\) receptors the respective binding free energies were not eompletely additive. These results suggest that the four (R)-hexahydro-difenidol ''binding moieties" (phenyl, cyclohexyl, hydroxy, and protonated amino group) cannot simultaneously form optimal interaetions with the M\(_1\), M\(_2\), and M\(_3\) muscarinic receptors. When eaeh of the hydrophobic groups is modified, the position of the whole molecule, relative to the four subsites, was changed to allow an optimal overall interaction with the musearlnie receptor.
The goals of the present study were: (1) to investigate thc binding properlies oi (R)- and (S)-procyclidine and two aehiral derivatives of muscarinic M\(_1\)• M\(_2\) and M\(_4\) receptor subtypes and (2) to identify the interaetions which allow these receptors to diseriminate between the two stereoisomers. (R)-Procyclidine showed a higher affinity for human neuroblastoma NB-OK 1 muscarinie M\(_1\) and rat striatum musearinie M\(_4\) receptors. a~ compared to rat cardiac M\(_2\) receptors. (S)-Procyclidine had a 130-iold lower affinity than (R)-procyclidine for M\(_1\) and M\(_4\) receptors. and a 40-fold lower affinity for M\(_2\) receptors. Pyrrinol. the aehiral diphenyl derivative with the eyclohexyl g.roup of (S}-procyclidine replaeed by a phenyl group, has an eight-fold lower affinity for M\(_1\) and M\(_4\) receptors. as eompared to (R)-procyclidine, and a three-fold lower affinity for M\(_2\) receptors. Hexahydro-procyclidine. the eorresponding achiral dicyclohexyl compound, had a 10- to 20-fold lower affinity than (R)-procyclidine for the three reeeptors. The inerease in binding free energy, which is observed when the phenyl and eyclohexyl groups of procyelidine are separately replaeed by cyclohexyJ and phenyl groups, respectively. was additive in the ease of M\(_1\)• M\(_2\) and M\(_4\) receptcrs. This indicates that the musearinic reeeptor s!ereoseleetivity was based on the eoexistence of two binding sites, one preferring a phenylrather than eyclohexyl group and the seeond preferring a cyclohexyl rather than a phenyl group. In addition. there were aiso binding sites for the hydroxy moiety and the protonated amino group of the ligands. The greater affinity and stereoselectivity of M\(_1\) and M\(_4\) muscarinic receptors for (R)-procyelidine reflected the better fit of the eyclohexyl group of (R)-procyclidine to the subsite of M\(_1\) and M\(_4\) as compared to M\(_2\) receptors.
1 We studied the effect of temperature on the binding to rat heart \(M_2\) muscarinic receptors of antagonists related to the carbon/silicon pairs pridinol/sila-pridinol and diphenidol/sila-diphenidol (including three germanium compounds) and six structurally related pairs of enantiomers [(R)- and (S)-procyclidine, (R)- and (S)-trihexyphenidyl, (R)- and (S)-tricyclamol, (R)- and (S)-trihexyphenidyl methiodide, (R)- and (S)-hexahydro-diphenidol and (R)- and (S)-hexbutinol]. Binding affinities were determined in competition experiments using \([^3H]\)-N-methyl-scopolamine chloride as radioligand. The reference drugs were scopolamine and N-methyl-scopolamine bromide.
2 The affinity of the antagonists either increased or decreased with temperature, van 't Hoff plots were linear in the 278–310°K temperature range. Binding of all antagonists was entropy driven. Enthalpy changes varied from large negative values (down to \(−29 kJ mol^{−1}\)) to large positive values (up to \(+ 30 kJ mol^{−1}\)).
3 (R)-configurated drugs had a 10 to 100 fold greater affinity for \(M_2\) receptors than the corresponding (S)-enantiomers. Enthalpy and entropy changes of the respective enantiomers were different but no consistent pattern was observed.
4 When silanols \((R_3SiOH)\) were compared to carbinols \((R_3COH)\), the affinity increase caused by C/Si exchange varied between 3 and 10 fold for achiral drugs but was negligible in the case of chiral drugs. Silanols induced more favourable enthalpy and less favourable entropy changes than the corresponding carbinols when binding. Organogermanium compounds \((R_4Ge)\) when compared to their silicon counterparts (R4Si) showed no significant difference in affinity as well as in enthalpy and entropy changes.
5 Exchange of a cyclohexyl by a phenyl moiety was associated with an increase or a decrease in drug affinity (depending on the absolute configuration in the case of chiral drugs) and generally also with a more favourable enthalpy change and a less favourable entropy change of drug binding.
6 Replacement of a pyrrolidino by a piperidino group and increasing the length of the alkylene chain bridging the amino group and the central carbon or silicon atom were associated with either an increase or a decrease of entropy and enthalpy changes of drug binding. However, there was no clear correlation between these structural variations and the thermodynamic effects.
7 Taken together, these results suggest that hydrogen bond-forming OH groups and, to a lesser extent, polarizable phenyl groups contribute significantly to the thermodynamics of interactions between these classes of muscarinic antagonists and \(M_2\) muscarinic receptors.
1 We have compared the binding properties of several hexocyclium and sila-hexocyclium derivatives to muscarinic Ml receptors (in rat brain, human neuroblastoma (NB-OK I) cells and calf superior cervical ganglia), rat heart M2 receptors, rat pancreas M3 receptors and M4 receptors in rat striatum, with their functional antimuscarinic properties in rabbit vas deferens (Ml/M4-like), guinea-pig atria (M2), and guinea-pig ileum (M3) muscarinic receptors.
2 Si la-substitution (C/Si exchange) of hexocyclium (~ sila-hexocyclium) and demethyl-hexocyclium (~demethyl-sila-hexocyclium) did not significantly affect their affinities for muscarinic receptors. By contrast, sila-substitution of demethoxy-hexocyclium increased its affinity 2 to 3 fold for all the muscarinic receptor subtypes studied.
3 The p-fluoro- and p-chloro-derivatives of sila-hexocyclium had lower affinities than the parent
compound at the four receptor subtypes, in binding and pharmacological studies.
4 In binding studies, o-methoxy-sila-hexocyclium (Ml = M4 ~ M3 ~ M2) had a much lower affinity than sila-hexocyclium for the four receptor subtypes, and discriminated the receptor subtypes more poorly than sila-hexocyclium (Ml = M3> M4> M2)' This is in marked contrast with the very clear selectivity of demethoxy-sila-hexocyclium for the prejunctional MtlM4-like heteroreceptors in rabbit vas deferens.
5 The tertiary amines demethyl-hexocyclium, demethyl-sila-hexocyclium and demethyl-o-methoxy-silahexocyclium had 10 to 30 fold lower affinities than the corresponding quaternary ammonium derivatives.
Cholinergie agents arepotent modulators of insulin release that aet via musearinie reeeptors. We now investigated the muscarinic receptor subtype present in rat panereatic islets in binding and funetional studies. Binding of 5 nM [ \(^3\)H]N-methylscopolamine ([\(^3\)H]NMS) was half maximal at 30 min. At 60 min, the maximal total bindingwas 1.29% and the non-specifie binding (presence of 100 ,uM atropine) was 0.18% of the total radioaetivity per 10 f.'g islet protein. Unlabelled atropine inhibited [\(^3\)H]NMS binding with an IC50 of ca. 30 nM. The rank order of antagonist high-affinity binding was atropine > sila-hexocyelium methyl sulfate (SiHC; M\(_1\) > M\(_3\) > M\(_2\) ) > pirenzepine (M\(_1\)> M\(_2\) = M\(_3\) ) = methoctramine (M\(_2\) > M\(_1\) > M\(_3\) ). The high-affinity K\(_d\)s were 8.5, 56, 1300 and 1300 nM, respectively. The high affinity Kd of the muscarinie receptor agonist, arecaidine propargyl ester (APE), was 8.1 nM. The EC\(_{50}\) for the biologieal effects of APE on insulin and glucagon secretion was 3.2 and 2.3 nM. The rank order for the high-affinity biological effects of antagonists (inhibition of APE-mediated insulin/ glucagon release) was almost the same as for binding. The data indicate that rat pancreatie islets contain neither an M\(_1\) subtype (high-affinity for pirenzepine) nor an M\(_2\) subtype (high-affinity for methoctramine) receptor. However, the data evidence an M\(_3\) receptor subtype, since SiHC in the absence of the M\(_1\) receptor subtype shows a relatively high affinity to the receptors in rat panereatic islets.
A series of tetracationic bis-triarylborane dyes, differing in the aromatic linker connecting two dicationic triarylborane moieties, showed very high submicromolar affinities toward ds-DNA and ds-RNA. The linker strongly influenced the emissive properties of triarylborane cations and controlled the fluorimetric response of dyes. The fluorene-analog shows the most selective fluorescence response between AT-DNA, GC-DNA, and AU-RNA, the pyrene-analog’s emission is non-selectively enhanced by all DNA/RNA, and the dithienyl-diketopyrrolopyrrole analog’s emission is strongly quenched upon DNA/RNA binding. The emission properties of the biphenyl-analog were not applicable, but the compound showed specific induced circular dichroism (ICD) signals only for AT-sequence-containing ds-DNAs, whereas the pyrene-analog ICD signals were specific for AT-DNA with respect to GC-DNA, and also recognized AU-RNA by giving a different ICD pattern from that observed upon interaction with AT-DNA. The fluorene- and dithienyl-diketopyrrolopyrrole analogs were ICD-signal silent. Thus, fine-tuning of the aromatic linker properties connecting two triarylborane dications can be used for the dual sensing (fluorimetric and CD) of various ds-DNA/RNA secondary structures, depending on the steric properties of the DNA/RNA grooves.
Aims: We set out to investigate the antibacterial activity of a new Mn-based photoactivated carbon monoxide-releasing molecule (PhotoCORM, [Mn(CO)\(_3\)(tpa-kappa\(^3\)N)]\(^+\)) against an antibiotic-resistant uropathogenic strain (EC958) of Escherichia coli. Results: Activated PhotoCORM inhibits growth and decreases viability of E. coli EC958, but non-illuminated carbon monoxide-releasing molecule (CORM) is without effect. NADH-supported respiration rates are significantly decreased by activated PhotoCORM, mimicking the effect of dissolved CO gas. CO from the PhotoCORM binds to intracellular targets, namely respiratory oxidases in strain EC958 and a bacterial globin heterologously expressed in strain K-12. However, unlike previously characterized CORMs, the PhotoCORM is not significantly accumulated in cells, as deduced from the cellular manganese content. Activated PhotoCORM reacts avidly with hydrogen peroxide producing hydroxyl radicals; the observed peroxide-enhanced toxicity of the PhotoCORM is ameliorated by thiourea. The PhotoCORM also potentiates the effect of the antibiotic, doxycycline. Innovation: The present work investigates for the first time the antimicrobial activity of a light-activated PhotoCORM against an antibiotic-resistant pathogen. A comprehensive study of the effects of the PhotoCORM and its derivative molecules upon illumination is performed and mechanisms of toxicity of the activated PhotoCORM are investigated. Conclusion: The PhotoCORM allows a site-specific and time-controlled release of CO in bacterial cultures and has the potential to provide much needed information on the generality of CORM activities in biology. Understanding the mechanism(s) of activated PhotoCORM toxicity will be key in exploring the potential of this and similar compounds as antimicrobial agents, perhaps in combinatorial therapies with other agents.
Organoboron compounds are important building blocks in organic synthesis, materials science, and drug discovery. The development of practical and convenient ways to synthesize boronate esters attracted significant interest. Photoinduced borylations originated with stoichiometric reactions of arenes and alkanes with well-defined metal-boryl complexes. Now photoredox-initiated borylations, catalyzed either by transition-metal or organic photocatalysts, and photochemical borylations with high efficiency have become a burgeoning area of research. In this chapter, we summarize research in the field of photocatalytic C-X borylation, especially emphasizing recent developments and trends, based on transition-metal catalysis, metal-free organocatalysis and direct photochemical activation. We focus on reaction mechanisms involving single electron transfer (SET), triplet energy transfer (TET), and other radical processes.
We developed a highly selective photocatalytic C-F borylation method that employs a rhodium biphenyl complex as a triplet sensitizer and the nickel catalyst [Ni(IMes)2] (IMes = 1,3-dimesitylimidazolin-2-ylidene) for the C-F bond activation and defluoroborylation process. This tandem catalyst system operates with visible (400 nm) light and achieves borylation of a wide range of fluoroarenes with B2pin2 at room temperature in excellent yields and with high selectivity. Direct irradiation of the intermediary C-F bond oxidative addition product trans-[NiF(ArF)(IMes)2] leads to fast decomposition when B2pin2 is present. This destructive pathway can be bypassed by indirect excitation of the triplet states of the nickel(II) complex via the photoexcited rhodium biphenyl complex. Mechanistic studies suggest that the exceptionally long-lived triplet excited state of the Rh biphenyl complex used as the photosensitizer allows for efficient triplet energy transfer to trans-[NiF(ArF)(IMes)2], which leads to dissociation of one of the NHC ligands. This contrasts with the majority of current photocatalytic transformations, which employ transition metals as excited state single electron transfer agents. We have previously reported that C(arene)-F bond activation with [Ni(IMes)2] is facile at room temperature, but that the transmetalation step with B2pin2 is associated with a high energy barrier. Thus, this triplet energy transfer ultimately leads to a greatly enhanced rate constant for the transmetalation step and thus for the whole borylation process. While addition of a fluoride source such as CsF enhances the yield, it is not absolutely required. We attribute this yield-enhancing effect to (i) formation of an anionic adduct of B2pin2, i.e. FB2pin2-, as an efficient, much more nucleophilic {Bpin-} transfer reagent for the borylation/transmetalation process, and/or (ii) trapping of the Lewis acidic side product FBpin by formation of [F2Bpin]- to avoid the formation of a significant amount of NHC-FBpin and consequently of decomposition of {Ni(NHC)2} species in the reaction mixture.
We reported a highly selective and general photo-induced C-Cl borylation protocol that employs [Ni(IMes)2] (IMes = 1,3-dimesitylimidazoline-2-ylidene) for the radical borylation of chloroarenes. This photo-induced system operates with visible light (400 nm) and achieves borylation of a wide range of chloroarenes with B2pin2 at room temperature in excellent yields and with high selectivity, thereby demonstrating its broad utility and functional group tolerance. Mechanistic investigations suggest that the borylation reactions proceed via a radical process. EPR studies demonstrate that [Ni(IMes)2] undergoes very fast chlorine atom abstraction from aryl chlorides to give [NiI(IMes)2Cl] and aryl radicals. Control experiments indicate that light promotes the reaction of [NiI(IMes)2Cl] with aryl chlorides generating additional aryl radicals and [NiII(IMes)2Cl2]. The aryl radicals react with an anionic sp2-sp3 diborane [B2pin2(OMe)]- formed from B2pin2 and KOMe to yield the corresponding borylation product and the [Bpin(OMe)]•- radical anion, which reduces [NiII(IMes)2Cl2] under irradiation to regenerate [NiI(IMes)2Cl] and [Ni(IMes)2] for the next catalytic cycle.
A highly efficient and general protocol for traceless, directed C3-selective C-H borylation of indoles with [Ni(IMes)2] as the catalyst was achieved. Activation and borylation of N-H bonds by [Ni(IMes)2] is essential to install a Bpin moiety at the N-position as a traceless directing group, which enables the C3-selective borylation of C-H bonds. The N-Bpin group which is formed is easily converted in situ back to an N-H group by the oxidiative addition product of [Ni(IMes)2] and in situ-generated HBpin. The catalytic reactions are operationally simple, allowing borylation of of a variety of substituted indoles with B2pin2 in excellent yields and with high selectivity. The C-H borylation can be followed by Suzuki-Miyaura cross-coupling of the C-borylated indoles in an overall two-step, one-pot process providing an efficient method for synthesizing C3-functionalized heteroarenes.
A 1,4,2,3‐diazadiborinine derivative was found to form Lewis adducts with strong two‐electron donors such as N‐heterocyclic and cyclic (alkyl)(amino)carbenes. Depending on the donor, some of these Lewis pairs are thermally unstable, converting to sole B,N‐embedded products upon gentle heating. The products of these reactions, which have been fully characterized by NMR spectroscopy, elemental analysis, and single‐crystal X‐ray diffraction, were identified as B,N‐heterocycles with fused 1,5,2,4‐diazadiborepine and 1,4,2‐diazaborinine rings. Computational modelling of the reaction mechanism provides insight into the formation of these unique structures, suggesting that a series of B−H, C−N, and B−B bond activation steps are responsible for these “intercalation” reactions between the 1,4,2,3‐diazadiborinine and NHCs.
Several bis(dimethylamino)‐substituted 1,4‐diaza‐2,3‐diborinines (DADBs) were synthesized with variable substituents at the backbone nitrogen atoms. By reaction with HCl or BX\(_{3}\) (X=Br, I), these species were successfully converted into their synthetically more useful halide congeners. The high versatility of the generated B−X bonds in further functionalization reactions at the boron centers was demonstrated by means of salt elimination (MeLi) and commutation (NMe\(_{2}\) DADBs) reactions, thus making the DADB system a general structural motif in diborane(4) chemistry. A total of 18 DADB derivatives were characterized in the solid state by X‐ray diffraction, revealing a strong dependence of the heterocyclic bonding parameters from the exocyclic substitution pattern at boron. According to our experiments towards the realization of a Dipp‐substituted, sterically encumbered DADB, the mechanism of DADB formation proceeds via a transient four‐membered azadiboretidine intermediate that subsequently undergoes ring expansion to afford the six‐membered DADB heterocycle.
Investigations concerning the reactivity of Ni(0) complexes [Ni(NHC)\(_{2}\)] of NHCs (N‐heterocyclic carbene) of different steric demand, Mes\(_{2}\)Im (= 1,3‐dimesitylimidazoline‐2‐ylidene) and iPr\(_{2}\)Im (= 1,3‐diisopropyl‐imidazoline‐2‐ylidene), with olefins, ketones and aldehydes are reported. The reaction of [Ni(Mes\(_{2}\)Im)\(_{2}\)] 1 with ethylene or methyl acrylate afforded the complexes [Ni(Mes\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐C\(_{2}\)H\(_{4}\))] 3 and [Ni(Mes\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐(C,C)‐H\(_{2}\)C=CHCOOMe)] 4, as it was previously reported for [Ni\(_{2}\)(iPr\(_{2}\)Im)\(_{4}\)(µ‐(η\(^{2}\):η\(^{2}\))‐COD)] 2 as a source for [Ni(iPr\(_{2}\)Im)\(_{2}\)]. In contrast to 2, complex 1 does not react with sterically more demanding olefins such as tetramethylethylene, 1,1‐diphenylethylene and cyclohexene. The reaction of [Ni(NHC)\(_{2}\)] with more π‐acidic ketones or aldehydes led to formation of complexes with side‐on η\(^{2}\)‐(C,O)‐coordinating ligands: [Ni(iPr\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=CH\(^{t}\)Bu)] 5, [Ni(iPr\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=CHPh)] 6, [Ni(iPr\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=CMePh)] 7, [Ni(iPr\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=CPh\(_{2}\))] 8, [Ni(iPr\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=C(4‐F‐C\(_{6}\)H\(_{4}\))\(_{2}\))] 9, [Ni(iPr\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=C(OMe)(CF\(_{3}\)))] 10 and [Ni(Mes\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=CHPh)] 11, [Ni(Mes\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=CH(CH(CH\(_{3}\))\(_{2}\)))] 12, [Ni(Mes\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=CH(4‐NMe\(_{2}\)‐C\(_{6}\)H\(_{4}\)))] 13, [Ni(Mes\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=CH(4‐OMe‐C\(_{6}\)H\(_{4}\)))] 14, [Ni(Mes\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=CPh\(_{2}\))] 15 and [Ni(Mes\(_{2}\)Im)\(_{2}\)(η\(^{2}\)‐O=C(4‐F‐C\(_{6}\)H\(_{4}\))\(_{2}\))] 16. The reaction of 1 and 2 with these simple aldehydes and ketones does not lead to a significantly different outcome, but NHC ligand rotation is hindered for the Mes\(_{2}\)Im complexes 3, 4 and 11–16 according to NMR spectroscopy. The solid‐state structures of 3, 4, 11 and 12 reveal significantly larger C\(_{NHC}\)‐Ni‐C\(_{NHC}\) angles in the Mes\(_{2}\)Im complexes compared to the iPr\(_{2}\)Im complexes. As electron transfer in d\(^{8}\)‐ (or d\(^{10}\)‐) ML\(_{2}\) complexes to π‐acidic ligands depends on the L–M–L bite angle, the different NHCs lead thus to a different degree of electron transfer and activation of the olefin, aldehyde or ketone ligand, i.e., [Ni(iPr\(_{2}\)Im)\(_{2}\)] is the better donor to these π‐acidic ligands. Furthermore, we identified two different side products from the reaction of 1 with benzaldehyde, trans‐[Ni(Mes\(_{2}\)Im)\(_{2}\)H(OOCPh)] 17 and [Ni\(_{2}\)(Mes\(_{2}\)Im)\(_{2}\)(µ\(_{2}\)‐CO)(µ\(_{2}\)‐η\(^{2}\)‐C,O‐PhCOCOPh)] 18, which indicate that radical intermediates and electron transfer processes might be of importance in the reaction of 1 with aldehydes and ketones.
A series of five new homoleptic, linear nickel d\(^{9}\)‐complexes of the type [Ni\(^{I}\)(NHC)\(_{2}\)]\(^{+}\) is reported. Starting from the literature known Ni(0) complexes [Ni(Mes\(_{2}\)Im)\(_{2}\)] 1, [Ni(Mes\(_{2}\)Im\(^{H2}\))2] 2, [Ni(Dipp\(_{2}\)Im)\(_{2}\)] 3, [Ni(Dipp\(_{2}\)Im\(^{H2}\))\(_{2}\)] 4 and [Ni(cAAC\(^{Me}\))\(_{2}\)] 5 (Mes\(_{2}\)Im=1,3‐bis(2,4,6‐trimethylphenyl)‐imidazolin‐2‐ylidene, Mes\(_{2}\)Im\(^{H2}\)=1,3‐bis(2,4,6‐trimethylphenyl)‐imidazolidin‐2‐ylidene, Dipp\(_{2}\)Im=1,3‐bis(2,6‐diisopropylphenyl)‐imidazolin‐2‐ylidene, Dipp\(_{2}\)Im\(^{H2}\)=1,3‐bis(2,6‐diisopropylphenyl)‐imidazolidin‐2‐ylidene, cAAC\(^{Me}\)=1‐(2,6‐diisopropylphenyl)‐3,3,5,5‐tetramethylpyrrolidin‐2‐yliden), their oxidized Ni(I) analogues [Ni\(^{I}\)(Mes\(_{2}\)Im)\(_{2}\)][BPh\(_{4}\)] 1\(^{+}\), [Ni\(^{I}\)(Mes\(_{2}\)Im\(^{H2}\))\(_{2}\)][BPh\(_{4}\)] 2\(^{+}\), [Ni\(^{I}\)(Dipp\(_{2}\)Im)\(_{2}\)][BPh\(_{4}\)] 3\(^{+}\), [Ni\(^{I}\)(Dipp\(_{2}\)Im\(^{H2}\))\(_{2}\)][BPh\(_{4}\)] 4\(^{+}\) and [Ni\(^{I}\)(cAAC\(^{Me}\))\(_{2}\)][BPh\(_{4}\)] 5\(^{+}\) were synthesized by one‐electron oxidation with ferrocenium tetraphenyl‐borate. The complexes 1\(^{+}\)–5\(^{+}\) were fully characterized including X‐ray structure analysis. The complex cations reveal linear geometries in the solid state and NMR spectra with extremely broad, paramagnetically shifted resonances. DFT calculations predicted an orbitally degenerate ground state leading to large magnetic anisotropy, which was verified by EPR measurements in solution and on solid samples. The magnetic anisotropy of the complexes is highly dependent from the steric protection of the metal atom, which results in a noticeable decrease of the g‐tensor anisotropy for the N‐Mes substituted complexes 1\(^{+}\) and 2\(^{+}\) in solution due to the formation of T‐shaped THF adducts.
A case study on the effect of the employment of two different NHC ligands in complexes [Ni(NHC)\(_{2}\)] (NHC=\(^{i}\)Pr\(_{2}\)Im\(^{Me}\) 1\(^{Me}\), Mes\(_{2}\)Im 2) and their behavior towards alkynes is reported. The reaction of a mixture of [Ni\(_{2}\)(\(^{i}\)Pr\(_{2}\)Im\(^{Me}\))\(_{4}\)(μ-(η\(^{2}\) : η\(^{2}\))-COD)] B/ [Ni(\(^{i}\)Pr\(_{2}\)Im\(^{Me}\))\(_{2}\)(η\(^{4}\)-COD)] B’ or [Ni(Mes\(_{2}\)Im)\(_{2}\)] 2, respectively, with alkynes afforded complexes [Ni(NHC)\(_{2}\)(η\(^{2}\)-alkyne)] (NHC=\(^{i}\)Pr\(_{2}\)Im\(^{Me}\): alkyne=MeC≡CMe 3, H\(_{7}\)C\(_{3}\)C≡CC\(_{3}\)H\(_{7}\) 4, PhC≡CPh 5, MeOOCC≡CCOOMe 6, Me\(_{3}\)SiC≡CSiMe\(_{3}\) 7, PhC≡CMe 8, HC≡CC\(_{3}\)H\(_{7}\) 9, HC≡CPh 10, HC≡C(p-Tol) 11, HC≡C(4-\(^{t}\)Bu-C\(_{6}\)H\(_{4}\)) 12, HC≡CCOOMe 13; NHC=Mes\(_{2}\)Im: alkyne=MeC≡CMe 14, MeOOCC≡CCOOMe 15, PhC≡CMe 16, HC≡C(4-\(^{t}\)Bu-C\(_{6}\)H\(_{4}\)) 17, HC≡CCOOMe 18). Unusual rearrangement products 11 a and 12 a were identified for the complexes of the terminal alkynes HC≡C(p-Tol) and HC≡C(4-\(^{t}\)Bu-C\(_{6}\)H\(_{4}\)), 11 and 12, which were formed by addition of a C−H bond of one of the NHC N-\(^{i}\)Pr methyl groups to the C≡C triple bond of the coordinated alkyne. Complex 2 catalyzes the cyclotrimerization of 2-butyne, 4-octyne, diphenylacetylene, dimethyl acetylendicarboxylate, 1-pentyne, phenylacetylene and methyl propiolate at ambient conditions, whereas 1\(^{Me}\) is not a good catalyst. The reaction of 2 with 2-butyne was monitored in some detail, which led to a mechanistic proposal for the cyclotrimerization at [Ni(NHC)\(_{2}\)]. DFT calculations reveal that the differences between 1\(^{Me}\) and 2 for alkyne cyclotrimerization lie in the energy profile of the initiation steps, which is very shallow for 2, and each step is associated with only a moderate energy change. The higher stability of 3 compared to 14 is attributed to a better electron transfer from the NHC to the metal to the alkyne ligand for the N-alkyl substituted NHC, to enhanced Ni-alkyne backbonding due to a smaller C\(_{NHC}\)−Ni−C\(_{NHC}\) bite angle, and to less steric repulsion of the smaller NHC \(^{i}\)Pr\(_{2}\)Im\(^{Me}\).
This thesis describes the synthesis and reactivity of bis-NHC ligated nickel(0)-complexes and their application in catalytic cyclization and borylation reactions of alkynes. The focus of the presented work lies on the investigation of the electronic and steric impact of different NHC ligands on the reactivity and catalytic activity of [Ni(NHC)2] complexes. Since d10 ML2 complexes play a decisive role for numerous catalytic reactions, such as the Suzuki-Miyaura cross-coupling, the first chapter provides an overview about the general properties of NHCs and the chemistry of NHC-ligated nickel complexes, their synthesis, characterization, reactivity, and application in catalysis.
Ionic liquids-assisted ring opening of three-membered heterocycles with thio- and seleno-silanes
(2022)
Ring opening reactions of strained heterocycles (epoxides, aziridines, thiiranes) by silyl chalcogenides, such as thiosilanes and selenosilanes, can be efficiently performed in a variety of ionic liquids, which can behave as reaction media and in some cases also as catalysts. This protocol enables an alternative access to β-functionalized sulfides and selenides under mild conditions.
Starting from chlorodimethyl(phenyl)silane (3), acetyldimethyl(phenyl)silane (l) was prepared by a two-step synthesis in a total yield of 90% [PhMe\(_2\)SiCl (3)-> PhMe\(_2\)SiCCOMe)=CH\(_2\) (4)-> PhMe\(_2\)SiC(O)Me (1)]. The prochiral acetylsilane 1 was transfonned enantioselectively into (R)-(1-hydroxyethyl)dimethyl(phenyl)silane [(R)-2] using plant cell Suspension cultures of Symphytum officinale L. or Ruta graveolens L. Under preparative conditions (300-mg scale, not optimized), (R)-2 was isolated in 15% (Symphytum) and 9% yield (Ruta), respectively. The enantiomeric purities of the products were 81% ee (Syrnphytum) and 60% ee (Ruta), respectively.
The zwitterionic spirocyclic \(\lambda_5\)-germanate bis(2,3-naphthalenediolato( 2-)](pyrrolidiniomethyl)germanate (8) was synthesized and the crystal structure of its tetartoacetonitrile solvate 8 · 1/4 CH\(_3\)CN studied by single-crystal X-ray diffraction. Compound 8 was prepared by reaction of (MeO)\(_3\)GeCH\(_2\)NC\(_4\)H\(_8\) (11; NC\(_4\)H\(_8\) = pyrrolidino) with two equivalents of 2,3-naphthalenediol (isolated as 8 · 1/4 CH\(_3\)CN; yield 92%). The coordination polyhedron around the pentacoordi- naphthalenediolatonate germanium atom of 8 · 1/4 CH\(_3\)CN can be described as a strongly distorted trigonal bipyramid (the structure is displaced by 38.9% from the ideal trigonal bipyrarnid towards the ideal square pyramid), the carbon atom occupying an equatorial position. In the crystal lattice of 8 · 1/4 CH\(_3\)CN, the zwitterions form intermolecular N-H ... o hydrogen bonds leading to the formation of dimers. 1H- and \(^{13}\C-NMR studies revealed that 8 also exists in solution ([D\(_6\)]DMSO).
Silylation of cellulose
(1977)
Ethane-l:2-diol and propane-l:3-diol reaet with 1: 1:3:3-tetramethyl-l:3-dichlorodisiloxane forming the corresponding rings. However, no ring compounds could be traced tbrough the reaction between butane-l :4-diol, glycerol and the dichlorodisiloxane respectively, where only polymeric compounds are formed. The silylation products of the di- and trihydroxy alcohols, as model compounds, has confirmed that the ring formation during silylation of cellulose with dichlorodisiloxane is uncertain.
The synthesis of the potent and highly selective silicon-containing antimuscarinic agent o-methoxysila- hexocyclium methyl sulfate and its corresponding tertiary amine (isolated as the dihydrochloride) is described. The quarternary compound is an omethoxy derivative of sila-hexocyclium methyl sulfate, which represents one of the tools currently used in experimental pharmacology for the subclassification of muscarinic receptors. The omethoxy derivative, the pharmacological profile of which differs substantially from tbat of the nonmethoxy compound, is also recommended as a tool for the investigation of muscarinic receptor heterogeneity.
Starting from trichloro(vinyl)silane (Cl\(_3\)SiCH=CH\(_2\)), the musearinic antagonists sila-biperiden [rac-(SiRS,C2SR>-ao-2] and endosila- biperiden [rac-(SiRS,C2SR)-endo-2] were prepared by a seven-step synthesis. Both silanols are configurationally stableininert organic solvents but undergo slow epimerization in aqueous solution (pH 7.4, 32°C) by inversion of the configuration at the silicon atom. The relative configurations of sila-biperiden and endo-sila-biperiden were detennined by single-crystal X-ray diffraction. Both compounds form intennolecular 0-H · · · N hydrogen bonds in the crystal leading to the fonnation of centrosymmetric dimers (sila-biperiden) and infinite chains (endo-sila-biperiden), respectively. Sila-biperiden is a silicon analogue (C/Si exchange) of the antiparkinsonian drug biperiden [rac-(CRS/C2SR}-exo-1]. In functional phannacological experiments, as well as in radioligand competition studies, biperiden, sila-biperiden and endo-sila-biperiden behaved as simple competitive antagonists at muscarinic Ml-, M2-, M3- and M4-receptors. The three compounds displayed the highest affinity for Ml-receptors (pA\(_2\) values: 8.72-8.80; pK\(_i\) values: 8.8-9.1), intermediate affinity for M4- and M3-receptors, and lowest affinity for M2-receptors (pA\(_2\) values: 7.57-7.79; pK\(_i\) values: 7.7-7.8). The affinity profile (Ml >. M4 > M3 > M2) of biperiden, sila-biperiden and endo-sila-biperiden is qualitatively similar to that of the M1-selective muscarinic antagonist pirenzepine. The antimuscarinic properlies of the C/Si analogues biperiden and sila-biperiden are almost identical.
Four different syntheses of the potent and selective muscanruc antagonist cyclohexyl( 4- fluorophenyl)(3-piperidinopropyl)silanol ( p-fluoro-hexahydro-sila-difenidol, p-F-HHSiD (2b); isolated as hydrochloride 2b· HCl) are described (starting materials: (CH\(_3\)O)\(_2\)SiCH\(_2\)CH\(_2\)CH\(_2\)Cl and Si(OCH\(_3\))\(_4\) ). In addition, the synthesis of the corresponding carbon analogue p-fluoro-hexahydro-difenidol ( p-F-HHD (2a); isolated as 2a· HCI) and the syntheses of three p-F-HHSiD derivatives (3-5), with a modified cyclic amino group, are reported (3: piperidinojpyrrolidino exchange, isolated as 3· HCI; 4: piperidinoj hexamethylenimino exchange, isolated as 4 · HCl; 5: quaternization of 2b with methyl iodide). The chiral compounds 2a, 2b, 3, 4 and 5 were prepared as racemates. In functional pharmacological studies, 3-5 behaved as simple competitive antagonists at musearlnie Ml receptors in rabbit vas deferens, M2 receptors in guinea-pig atria, and M3 receptors in guinea-pig ileal smooth rnuscle. The pyrrolidino (3) and hexamethylenimino (4) analogues of the parent drug p-F-HHSiD (2b) displayed the highest affinity for Ml and M3 receptors (pA\(_2\) values: 7.0-7.4) but exhibited lower affinity for cardiac M2 receptors (pA\(_2\) : 5.9 and 6.0). Their affinity profile (Ml- M3 > M2) is different from that of p-F-HHSiD (2b) (M3 > Ml > M2), but qualitatively very similar tothat of p-F-HHD (2a). The methiodide 5 exhibited the highest affinity for Ml receptors (pA\(_2\) : 8.5) but lower affinity for M2 and M3 receptors by factors of 5.6 and 3.6, respectively.
(R)-1,1-Dimethyl-1-sila-cyclohexan-2-ol [(R)-2] was prepared by enantioselective microbial reduction of 1,1-dimethyl-1-sila-cyclohexan-2-one (1) with growing cells of the yeast Kloeckera corticis (ATCC 20109). At a substrate concentration of 0.5 g/1 (temperature 27° C, incubation time 16 h), (R}-2 was obtained on a preparative scale in 60% yield and with an enantiomeric purity of 92% ee. Repeated recrystallization of the biotransformation product from n-hexane raised the enantiomeric purity to 99% ee.
(SiR,CR)- and (SiS,CR)-t-butyl(l-hydroxyethyl)methylphenylsilane [(SiR,CR)-2 and (SiS,CR)-3] have been prepared by (R)-selective microbial rcduction of racemic acetyl(t-butyl)methylphenylsilane (rac-1) using resting free cells of the yeast Trigonopsis variabilis (DSM 70714) or the bacterium Corynebacterium dioxydans (ATCC 21766). The biotransfonnations were carried out on a 10 g scale. Afterseparation by column chromatography on silica gel, the optically active diastereomers (SiR,CR)-2 and (SiS,CR)-3 produccd by T. variabilis were obtained in good yields [74% ((SiR,CR)-2). 78% ((SiS,CR)-3)]. The products obtained from the reduction with C. dioxydans were isolated in significantly lower yields [20% ((SiR,CR)-2), 20% ((SiS,CR)-3)]; reaction conditions not optimized). Both bioconversions gave products with high enantiomeric purities (T. variabilis: 91% ee ((SiR,CR)-2), 96% ee ((SiS,CR)-3); C. dioxydons: ~ 991 ee ((SiR,CR)-l), ~ 99% ee ((SiS,CR)-3)). To throw light on the stereochemical aspects of these biotransfonnations, an X-ray diffraction study was carried out on the 3,5-dinitrobenzoate of rac-(SiR,CS/SiS,CR)-3. In addition, 1H NMR spectroscopic stereochemical correlation studies were performed with the (S)-MTPA esters derived from (SiR,CR)-l, (SiS,CR)-3, rac-(SiR,CRjSiS,CS)-2 and rac-(SiR,CSjSiS,CR)-3 [rac-(SiR,CR/ SiS,CS)-2 and rac-(SiR,CS/SiS,CR)-3 were obtained by reduction of rac-1 with LiAIH\(_4\) in diethylether, followed by chromatographic separation of the diastereomers on silica gel]. These stereochemical studies allowed assignment of the absolute configurations and enantiomeric purities of the biotransformation products.
15 new C/Si-analogue pairs (C-compounds and sila- or disila-substituted derivatives, respectively), which are structurally related to nifedipine, have been synthesized. These and some further C/Si-pairs have been investigated comparatively with respect to their physicochemical and pharmacological properties. Using reversed-phase thin-layer chromatography it was shown that both the sila- and disila-analogues are more Iipophilic than the corresponding C-compounds. With respect to the in vitra spasmolytic potencies the Si-compounds show approximately similar structure-activity relationships to their carba-analogues. However, in some cases marked differences in in vivo effects (cardiovascular and antihypertensive activity) could be demonstrated.
Bis( 4-fluorophenyl)methyl(l H-1,2,4-triazol-1-yl-methyl)germane (2), a germanium analogue of the agricultural fungicide flusilazole (1), has been synthesized from Cl\(_3\)GeCH\(_2\)CI (3) by both a three-step and a four-step synthesis (3-> (p-F-C\(_6\)H\(_4\))\(_2\)Ge(CH\(_2\)Cl)Br (4)-> (p-F-C\(_6\)H\(_4\))\(_2\)Ge(CH\(_2\)CI)CH\(_3\) (S)-> 2; S ~ (p-F-C\(_6\)H\(_4\))\(_2\)Ge(CH\(_2\)I)CH\(_3\) (6)-> l). The fungicidal properties of l have been compared with those of the parent silicon compound 1 (studies on Si/Ge bioisosterism). In various test systems, the SijGe analogues 1 and 2 showed comparable fungicidal properlies (in activity against plant pathogenic fungi: in agar plate diffusion tests and greenhause evaluations; in activity against human pathogenic fungi: in serial dilution tests). In addition, 1 and 2 displayed comparable potencies in respect of sterol biosynthesis inhibition in Sacclulromycopsis üpolytica and Pyricularia oryzae, the mode of action being primarily an inhtbition of oxidative C14-demethylation.
Thirty strains of microorganisms (bacteria, yeasts, fungi and green algae) were tested as resting free cells for their ability to transform acetyldimethylphenylsilane (1) enantioselectively into (R)-(1-hydroxyethyl) dimethylphenylsilane [(R)-2]. The biotransformations were monitared by GC (packed OV-17 column), and the enantiomeric purities of the products isolated were determined by HPLC (cellulose triacetate column, UV detection). All microorganisms tested were found to reduce 1 enantioselectively to give (R)-2. Under the test conditions used, the yeast Trigonapsis variabilis (DSM 70714) was found to 1 exhibif the highest specific activity (1.5 mg product x g cell wet mass\(^{-1}\) x min\(^{-1}\) ), whereas the highest enantioselectivities were observed for the bacteria Acinetobacter ca lcoaceticus (ATCC 31012) (>95% ee), Brevfbacterium species (ATCC 21860) (90% ee) and Corynebacterium dioxydans (ATCC 21766) (>95% ee), the yeast Candida humico la (OSM 70067) (90% ee), the fungus Cunninghame lla e legans (ATCC 26269) (94% ee), as well as the cyanobacterium Synechococcus leopoliensis (94% ee).· From the green algae tested, Chlamydomonas reinhardii showed the highest.enantioselectivity (85% ee).
Enantioselective reduction of acetyldimethylphenylsilane by Trigonopsis variabilis (DSM 70714)
(1987)
Growing and resting cells of the yeast Trigonapsis variabilis (DSM 70714) can be used for the enantioselective reduction of the organosilicon compound acetyldimethylphenylsilane (J) to give optically active (R)-(1-hydroxyethyl)dimethylphenylsilane [(R)-2] in good yields. The enantiomeric purity of the isolated product was determined tobe 62-86% ee depending on the substrate concentration used. Both substrate and product caused an inhibition of the reaction at concentrations higher than 0.35 and 0.5 g/1, respectively. Besides, higher substrate and product concentrations led to increased formation of the by-product 1,1,3,3-tetramethyl-1,3-diphenyldisiloxane. Considering the limiting substrate and product concentrations, it was possible to use the same biomass at least 5 times without significant loss of enzyme activity. 3-Methyl-3-phenyl-2-butanone (5) and acetyldimethylphenylgermane (7), which represent carbon and germanium analogues of 1, were also found to be accepted as substrates by Trigonapsis variabilis (DSM 70714). The reduction rates of the silicon {1) and germanium compound {7) were much higher than the transformation rate of the corresponding carbon analogue 5.
In this contribution, we illustrate uranium complexes bearing a pendant borate (i.e. 1 and 2) or a pendant borane (i.e. 3 and 4) moiety via reaction of the highly strained uranacycle I with various 3‐coordinate boranes. Complexes 3 and 4 represent the first examples of uranium complexes with a pendant borane Lewis acid. Moreover, complex 3 was capable of activation of CO, delivering a new CO activation mode, and an abnormal CO 1,2‐insertion pathway into a U−N bond. The importance of the pendant borane moiety was confirmed by the controlled experiments.
The enantiomers of the antimuscarinic agent 1-cyclohexyl-1- (4-fluorophenyl)-4-piperidino-1-butanol [(R)- and (S)-p-fluorohexahydro- difenidol] ((R)- and (S)-2a] and their methiodides (R)- 3 and (S)-3 were prepared with high enantiomeric purity. (R)- 2a and (S)-2a (isolated as hydrochlorides) were obtained by catalytic hydrogenation (Pd/C contact) of the corresponding enantiomers of 1-cyclohexyl-1-( 4-fl uorophen yl)-4-piperidino- 2-butyn-1-ol [(R)- and (S)-4]. Reaction of (R)-2a and (S)-2a with rnethyl iodide led to (R)-3 and (S)-3, respectively. The unsaturated precursors (R)- and (S}-4 (enantiorneric purity ~ 99.80 and ~99.94% e.e.; calorimetric analysis) were prepared by res-sepaolution of rac-4 [available from 4-FC\(_6\)H\(_4\)C(O)C\(_6\)H\(_{11}\) by reaction with LiC ~ CCH\(_2\)NC\(_5\)H\(_{10}\)] using (R)- and (S)-mandelic acid as resolving agents. The absolute configurations of the (R) and (S) enantiomers of 2a, 3, and 4 were determined by an X-ray crystal-structure analysis of (S)-5, the methiodide of (S)-4. (R)- 2a and (R)-3 exhibit a higher affinity for muscarinic M1, M2, M3, and M4 receptors (by up to two orders of magnitude) than their corresponding antipodes (S)-2a and (S)-3, the degree of stereoselectivity depending on the receptor subtype involved. (R)-2a represents a useful tool for rnuscarinic receptor research (affinity profile: M1 ~ M3 ~ M4 > M2).
CO\(_2\) is found to undergo room-temperature, ambient- pressure reactions with two species containing boron-boron multiple bonds, leading to incorporation of either one or two CO\(_2\) molecules. In one case, a thermally-unstable intermediate was structurally characterized, indicating the operation of an initial 2+2 cycloaddition mechanism in the reaction.
The design of ligands is one of the most important and simultaneously challenging fields of research in modern inorganic chemistry. The aim is to synthesise ligands that can serve as coordination units for a broad variety of metal fragments and different purposes. The ligands have to be very flexible concerning their donating behaviour and geometrical prerequisites in order to correspond to the required metal fragments.
Cyclic diboranes(4) based on a chelating monoanionic, benzylphosphine linker were prepared by boron-silicon exchange between arylsilanes and B\(_2\)Br\(_4\). Coordination of Lewis bases to the remaining sp\(^2\) boron atom yielded unsymmetrical sp\(^3\)-sp\(^3\) diboranes, which were reduced with KC\(_8\) to their corresponding trans-diborenes. These compounds were studied by a combination of spectroscopic methods, X-ray diffraction and DFT calculations. PMe\(_3\)-stabilized diborene 6 was found to undergo thermal rearrangement to gem- diborene 8. DFT calculations on 8 reveal a polar boron-boron bond, and indicate that the compound is best described as a borylborylene.
A doubly base-stabilized diborane based on a benzylphosphine linker was prepared by a salt elimination reaction between 2-LiC\(_6\)H\(_4\)CH\(_2\)PCy\(_2\).Et\(_2\)O and B\(_2\)Br\(_4\). This compound was reduced with KC8 to its corresponding diborene, with the benzylphosphine forming a five-membered chelate. The diborene reacts with butadiene, 2-trimethylsiloxy-1,3-butadiene and isoprene to form 4,5-diboracyclohexenes, which interconvert between their 1,1- (geminal) and 1,2- (vicinal) chelated isomers. The 1,1-chelated diborene undergoes a halide-catalysed isomerisation into its thermodynamically favoured 1,2-isomer, which undergoes Diels-Alder reactions more slowly than the kinetic product.
Five compounds containing boron–boron multiple bonds are shown to undergo hydrophosphination reactions with diphenylphosphine in the absence of a catalyst. With diborenes, the products obtained are highly dependent on the substitution pattern at the boron atoms, with both 1,1- and 1,2- hydrophosphinations observed. With a symmetrical diboryne, 1,2-hydrophosphination yields a hydro(phosphino)diborene. The different mechanistic pathways for the hydrophosphination of diborenes are rationalised with the aid of density functional theory calculations.
In this work, two new quadrupolar A-π-D-π-A chromophores have been prepared featuring a strongly electron- donating diborene core and strongly electron-accepting dimesitylboryl F(BMes2) and bis(2,4,6-tris(trifluoromethyl)phenyl)boryl (BMes2) end groups. Analysis of the compounds by NMR spectroscopy, X-ray crystallography, cyclic voltammetry and UV-vis-NIR absorption and emission spectroscopy indicated that the compounds possess extended conjugated π-systems spanning their B4C8 cores. The combination of exceptionally potent π-donor (diborene) and π- acceptor (diarylboryl) groups, both based on trigonal boron, leads to very small HOMO-LUMO gaps, resulting in strong absorption in the near-IR region with maxima in THF at 840 and 1092 nm, respectively, and very high extinction coefficients of ca. 120,000 M-1cm-1. Both molecules also display weak near-IR fluorescence with small Stokes shifts.
Sterically unencumbered diborenes based on a benzylphosphine chelate undergo diboration reactions with bis(catecholato)diboron in the absence of a catalyst to yield tetraboranes. The symmetrical diborenes studied undergo 1,2- diborations, whereas an unsymmetrical derivative was found to yield a triborylborane-phosphine adduct as the result of a formal 1,1-diboration. A related borylborylene compound also underwent a 1,2-diboration to produce a borylene-borane adduct.
The aim of this work was to synthesize and functionalize different bio-relevant nanomaterials like silica-coated superparamagnetic iron oxide nanoparticles (SPIONs) as contrast agents for T2 magnetic resonance imaging (MRI) and detonation nanodiamond (DND) with the neurohormone peptide allatostatin 1 (ALST1) and a fluorescent dye. Analytical techniques for the determination and quantification of surface functional groups like amines, azides, and peptides were also developed and established.
Thus, in the first part of the work, a TGF-1 binding peptide and allatostatin 1 (ALST1), both supposed to act as active tumour targeting vectors, were synthesized by solid-phase peptide synthesis (SPPS) and characterized by high pressure liquid chromatography (HPLC) and mass spectrometry. Then, azide-functionalized silica nanoparticles were synthesized by the Stöber process and characterized by transmission electron microscopy (TEM) and infrared spectroscopy (IR). The surface loading of amine and azide groups was determined by a new protocol. The azide groups were reduced with sodium boronhydride to amine and then functionalized with Fmoc-Rink Amide linker according to a standard SPPS protocol. Upon cleavage of Fmoc by piperidine, the resulting dibenzofulvene and its piperidine adduct were quantified by UV/Vis spectroscopy and used to determine the amount of amine groups on the nanoparticle surface. Then, ALST1 and related tyrosine- and phenylalanine substituted model peptides were conjugated to the azide-functionalized silica nanoparticles by copper(I)-catalyzed azide-alkyne dipolar cycloaddition (CuAAC). The successful peptide conjugation was demonstrated by the Pauly reaction, which however is only sensitive to histidine- and tyrosine-containing peptides. As a more general alternative, the acid hydrolysis of the peptides to their individual amino acid building blocks followed by derivatization with phenyl isothiocyanate (PITC) allowed the separation, determination, and quantification of the constituent amino acids by HPLC.
In the second part of the work, amine- and azide-functionalized silica-coated superparamagnetic iron oxide nanoparticles (SPIONs) were synthesized by co-precipitation and subsequent silica-coated based on the Stöber process and characterized by TEM and IR. The amine surface loading was determined by the method already established for the pure silica systems. The azide surface loading could also be quantified by reduction with sodium boronhydride to amine groups and then conjugation to Fmoc-Rink amide linker. Upon cleavage of Fmoc with piperidine, the total amine surface loading was obtained. The amount of azide surface groups was then determined from the difference of the total amine surface loading and the amine surface loading. Thus, it was possible to quantify both amine and azide surface groups on a single nanoparticle system. Superparamagnetic iron oxide nanoparticles (SPIONs) are potent T2 contrast agents for magnetic resonance imaging (MRI). Due to their natural metabolism after injection into the blood stream, SPIONs mostly end up inside macrophages, liver, spleen or kidneys. To generate a potential target-specific SPION-based T2 contrast agent for MRI, the neurohormone peptide ALST1 was conjugated by CuAAC to the azide- and amine functionalized superparamagnetic iron oxide nanoparticles, since ALST1 is supposed to target difficult-to-treat neuroendocrinic tumours due to its analogy to galanin and somastatin receptor ligands. The organic fluorescent dye cyanine 5 (Cy5) was also conjugated to the silica-coated superparamagnetic iron oxide nanoparticles (SPIONs) via a NHS-ester to the amines to enable cell uptake studies by fluorescence microscopy. These constructs were characterized by TEM, dynamic light scattering (DLS), and IR. The amino acids of the conjugated ALST1 were determined by the HPLC method as described before for peptide-modified silica nanoparticle surfaces. Then, the relaxivity r2 was measured at 7 T. However, a r2 value of 27 L/mmolFe·s for the dual ALST1-/Cy5-functionalized silica-coated SPIONs was not comparable to T2 contrast agents in clinical use, since their relaxivity is commonly determined at 1.5 T, and no such instrument was available. However, it can be assumed that the synthesized dual
ALST1-/Cy5-functionalized silica-coated SPION would show a lower r2 at 1.5 T than at 7T. Commercial T2 MRI contrast agents like VSOP-C184 from Ferropharm show at r2 values of about 30 L/mmolFe·s at 1.5 T. Still, the relaxivity of the new material has some potential for application as a T2 contrast agent. Then, the material was used in cell uptake studies by fluorescence microscopy with the conjugated Cy5 dye as a probe. The dual
ALST1-/Cy5-functionalized silica-coated SPION showed a high degree of agglomeration with no cellular uptake unlike described for ALST1-functionalized nanoparticles in literature. It is assumed that upon agglomeration of the particles, constructs form which are unable to be internalized by the cellular endocytotic pathways anymore. As a future perspective, the tendency of the particle to agglomerate should be reduced by changing the coating material to polyethylene glycol (PEG) or chitosan, which are known to be bio-compatible, bio-degradable and prevent agglomeration.
In the third part of the work, the rhenium compound [ReBr(CO)3(L)] with L = 2-phenyl-1H-imidazo[4,5-f][1,10]phenanthroline and its manganese analogue were synthesized by heating the ligand and rhenium pentacarbonyl bromide or and manganese pentacarbonyl bromide respectively, in toluene. However, [MnBr(CO)3(L)] was unstable upon illumination by UV light at 365 nm. Thus, it was dismissed for further application. The photophysical properties of [ReBr(CO)3(L)] were explored, by determination of the excited-state life time by the time-correlated single-photon counting (TCSPC) method and the quantum yield by a fluorescence spectrometer equipped with an integration sphere. A value of = 455 ns, a Stokes shift of 197 nm and a rather low quantum yield =were found. Metal complexes are supposed to have superior properties compared to organic dyes due to their large Stokes shifts, long excited-state life times, and high quantum yields. Thus, amine- and azide-functionalized detonation nanodiamond (DND) as an alternative biological inert carrier system was functionalized with ALST1 to enhance its cell uptake properties. A luminescent probe for cell uptake studies using fluorescence microscopy was also attached, either based on the new rhenium complex or the commercially available organic dye Cy5, respectively. The aldehyde-functionalized rhenium complex was conjugated to the DND via oxime ligation, which is known to be a mild and catalyst-free conjugation method. The amount of peptide ALST1 on the DND was analyzed and quantified after acid hydrolysis and PITC derivatization by HPLC as described before. Then, the ALST1-/luminescent probe-functionalized DND was investigated for its photophysical properties by fluorescence spectroscopy. The Cy5-functionalized material showed a slightly lower fluorescence performance in aqueous solution than reported in literature and commercial suppliers with a life time < 0.4 ns and quantum yields not determinable by integration sphere due to the week signal intensity. The rhenium complex-functionalized material had a very low signal intensity in only aqueous medium, and thus determination of life times and quantum yield by fluorescence spectroscopy was not possible. After incubation with MDA-MB 231 cells, the Cy5-functionalized DND could easily be detected due to its red fluorescence. However, it was not possible to visualize the rhenium complex-functionalized DND with fluorescence microscopy due to the low fluorescence intensity of the complex in aqueous medium and the lack of proper filters for the fluorescence microscope. Cy5-functionalized DND did not show any cellular uptake in fluorescence microscopy after conjugation with ALST1. Since the nanodiamond surface is known to strongly adsorb peptides and proteins, it is assumed that the peptide chain is oriented perpendicular to the nanoparticle surface and thus not able to interact with cell membrane receptors to promote cell uptake of the particles. As a future perspective, the ALST1-promoted cellular uptake of the DND should be improved by using different linker systems for peptide conjugation to prevent adsorption of the peptide chain on the particle surface.
The new analytical methods for amino-, azide-, and peptide-functionalized nanoparticles have great potential to assist in the quantification of nanoparticle surface modifications by UV/Vis spectroscopy and HPLC. The determination of surface amine and azide groups based on the cleavage of conjugated Fmoc-Rink amide linker and detected by UV/Vis spectroscopy is applicable to all amine-/azide-functionalized nanomaterials. However, particles which form very stable suspension with the cleavage mixture can cause quantification problems due to scattering, making an accurate quantification of dibenzofulvene and its piperidine adduct impossible. The detection of tyrosine- and histidine-containing peptides based on the Pauly reaction is well-suited as a fast and easy-to-perform qualitative demonstration of successful peptide surface conjugation. However, its major drawback as a colourimetric approach is that coloured particles cannot be evaluated by this method. The amino acid analysis based on HPLC after acid hydrolysis of peptides conjugated to nanoparticle surfaces to its individual building blocks and subsequent derivatization with PITC, can be used on all nanomaterials with peptide or protein surface modification. It allows detection of amino acids down to picomolar concentrations and even enables analysis of very small peptide surface loadings. However, the resulting HPLC traces are difficult to analyze.
Three new analytical methods based on UV/Vis and HPLC techniques have been developed and established. They assisted in the characterization of the synthesized DND and SPIONs with dual functionalization by ALST1 and Cy5 or [ReBr(CO)3(L)], respectively. However, the nanomaterials showed no cellular uptake due to a high tendency to agglomerate. The cellular uptake should be improved and the tendency to agglomerate of the SPIONs should be reduced by changing the surface coating from silica to either PEG or chitosan. Furthermore, different linker systems for connecting peptides to DND surfaces should be synthesized and evaluated to reduce potential peptide chain adsorption.
The photochemistry and photophysics of transition metal complexes are of great interest, since such materials can be exploited for a wide range of applications such as in photocatalysis, sensing and imaging, multiphoton-absorption materials and the fabrication of OLEDs. A full understanding of the excited state behavior of transition metal compounds is therefore important for the design of new materials for the applications mentioned above. In principle, the luminescence properties of this class of compounds can be tuned by changing the metal or subtle changes in the ligand environment.
Furthermore, transition-metal complexes continue to play a major role in modern synthetic chemistry. In particular, they can realize selective transformations that would either be difficult or impossible by conventional organic chemistry. For example, they enable the efficient and selective formation of carbon–carbon bonds. One famous example of these types of transformations are metal-catalyzed cyclization reactions. Herein, metallacyclopentadiene complexes are considered as key intermediates in a number of metal-mediated or -catalyzed cyclization reactions, i.e. the [2+2+2] cyclotrimerization of alkynes. Recent research has focused on the synthesis and characterization of these metallacyclic intermediates such as MC4 ring systems. Metallacyclopentadienes are structurally related to main group EC4 systems such as boroles, siloles, thiophenes and phospholes. Overall, this group of compounds (EC4 analogues) is well known and has attracted significant attention due to their electron-transport and optical properties. Unlike transition metal analogues, however, these EC4 systems show no phosphorescence, which is due to inefficient SOC compared to 2nd and 3rd row transition metals, which promoted us to explore the phosphorescence potential of metallacyclopentadienes.
In 2001, Marder et al. developed a one-pot high-yield synthesis of luminescent 2,5 bis(arylethynyl)rhodacyclopentadienes by reductive coupling of 1,4-diarylbuta-1,3-diynes at a suitable rhodium(I) precursor. Over the past years, a variety of ligands (e.g. TMSA, S,S’ diethyldithiocarbamate, etc.) and 1,4-bis(p-R-phenyl)-1,3-butadiynes or linked , bis(p-R-arylethynyl)alkanes (R = electron withdrawing or donating groups) were investigated and always provided a selective formation of 2,5 bis(arylethynyl)rhodacyclopentadienes, which were reported to be fluorescent despite presence of the heavy atom. To examine the influence of the ligand sphere around the rhodium center on the intersystem-crossing (ISC) processes in the above-mentioned fluorescent rhodacyclopentadienes and to increase the metal character in the frontier orbitals by destabilizing the Rh filled d-orbitals, a -electron donating group was introduced, namely acetylacetonato (acac). Interestingly, in 2010 Tay reacted [Rh(κ2-O,O-acac)(PMe3)2] with ,-bis(p-R-arylbutadiynyl)alkanes and observed not only the fluorescent 2,5 bis(arylethynyl)rhodacyclopentadienes, but also rhodium 2,2’-bph complexes as products, which were reported to be phosphorescent in preliminary photophysical studies.
In this work, the reaction behavior of [Rh(κ2-O,O-acac)(L)2] (L = PMe3, P(p-tolyl)3) with different ,-bis(p-R-arylbutadiynyl)alkanes was established. Furthermore, the separation of the two isomers 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium 2,2’-bph complexes (B), and the photophysical properties of those were explored in order to clarify their fundamentally different excited state behaviors.
Reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with ,-bis(arylbutadiynyl)alkanes gives exclusively weakly fluorescent 2,5-bis(arylethynyl)rhodacyclopentadienes. Changing the phosphine ligands to PMe3, reactions of [Rh(κ2-O,O-acac)(PMe3)2] and , bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties, as mentioned before.
As a result of a normal [2+2] reductive coupling at rhodium, 2,5 bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence. Rhodium 2,2’-bph complexes (B), which show phosphorescence, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent -H-shift. Control of the isomer distribution, of 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium biphenyl complexes (B), is achieved by modification of the linked , bis(arylbutadiynyl)alkane.
Changing the linker length from four CH2 to three CH2 groups, dramatically favors the formation of the rhodium biphenyl isomer B, providing a fundamentally new route to access photoactive metal biphenyl compounds in good yields. This is very exciting as the photophysical properties of only a limited number of bph complexes of Ir, Pd and Pt had been explored. The lack of photophysical reports in the literature is presumably due to the limited synthetic access to various substituted 2,2’-bph transition metal complexes.
On the other hand, as the reaction of [Rh(κ2-O,O-acac)(P(p-tolyl)3)2] with , bis(arylbutadiynyl)alkanes provides a selective reaction to give weakly fluorescent 2,5 bis(arylethynyl)rhodacyclopentadiene complexes with P(p-tolyl)3 as phosphine ligands, a different synthetic access to 2,5-bis(arylethynyl)rhodacyclopentadiene complexes with PMe3 as phosphine ligands was developed, preventing the time-consuming separation of the isomers. The weak rhodium-phosphorus bonds of 2,5-bis(arylethynyl)rhodacyclopentadiene complexes bearing P(p tolyl)3 as phosphine ligands, relative to those of related PMe3 complexes, allowed for facile ligand exchange reactions. In the presence of an excess of PMe3, a stepwise reaction was observed, giving first the mono-substituted, mixed-phosphine rhodacyclopentadiene intermediates and, subsequently, full conversion to the highly fluorescent 2,5 bis(arylethynyl)-rhodacyclopentadienes bearing only PMe3 ligands (by increasing the reaction temperature).
With spectroscopically pure 2,5-bis(arylethynyl)rhodacyclopentadiene complexes A (bearing PMe3 as phosphine ligands) and rhodium 2,2-bph complexes B in hand, photophysical studies were conducted. The 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are highly fluorescent with high quantum yields up to 54% and very short lifetimes (τ = 0.2 – 2.5 ns) in solution at room temperature. Even at 77 K in glass matrices, no additional phosphorescence is observed which is in line with previous observations made by Steffen et al., who showed that SOC mediated by the heavy metal atom in 2,5-bis(arylethynyl)rhodacyclopentadienes and 2,5 bis(arylethynyl)iridacyclopentadienes is negligible. The origin of this fluorescence lies in the pure intra-ligand (IL) nature of the excited states S1 and T1. The HOMO and the LUMO are nearly pure and * ligand orbitals, respectively, and the HOMO is energetically well separated from the filled rhodium d orbitals. The absence of phosphorescence in transition metal complexes due to mainly IL character of the excited states is not unusual, even for heavier homologues than rhodium with greater SOC, resulting in residual S1 emission (fluorescence) despite ISC S1→Tn being sufficiently fast for population of T1 states. However, there are very few complexes that exhibit fluorescence with the efficiency displayed by our rhodacyclopentadienes, which involves exceptionally slow S1→Tn ISC on the timescale of nanoseconds rather than a few picoseconds or faster.
In stark contrast, the 2,2’-bph rhodium complexes B are exclusively phosphorescent, as expected for 2nd-row transition metal complexes, and show long-lived (hundreds of s) phosphorescence (Ф = 0.01 – 0.33) at room temperature in solution. As no fluorescence is detected even at low temperature, it can be assumed that S1→Tn ISC must be faster than both fluorescence and non-radiative decay from the S1 state. This contrasts with the behavior of the isomeric 2,5-bis(arylethynyl)rhodacyclopentadienes for which unusually slow ISC occurs on a timescale that is competitive with fluorescence (vide supra). The very small values for the radiative rate constants, however, indicate that the nature of the T1 state is purely 3IL with weak SOC mediated by the Rh atom. The phosphorescence efficiency of these complexes in solution at room temperature is even more impressive, as non-radiative coupling of the excited state with the ground state typically inhibits phosphorescence. Instead, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to 646 s and to emit with high quantum yields for biphenyl complexes. The exceptionally long lifetimes and small radiative rate constants of the rhodium biphenyl complexes are presumably a result of the large conjugated -system of the organic ligand. According to TD DFT studies, the T1 state involves charge-transfer from the biphenyl ligand into the arylethynyl moiety away from the rhodium atom. This reduces the SOC of the metal center that would be necessary for fast phosphorescence. These results show that the π-chromophoric ligand can gain control over the photophysical excited state behavior to such an extent that even heavy transition metal atoms like rhodium participate in increasing the fluorescence such as main-group analogues do. Furthermore, in the 2,2’-bph rhodium complexes, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to hundreds of s and to emit with exceptional quantum yields.
Therefore, investigations of the influence of the ligand sphere around the rhodium center have been made to modify the photophysical properties and furthermore to explore the reaction behavior of these rhodium complexes. Bearing in mind that the P(p-tolyl)3 ligands can easily be replaced by the stronger -donating PMe3 ligands, ligand exchange reactions with N heterocyclic carbenes (NHCs) as even stronger -donors was investigated. Addition of two equivalents of NHCs at room temperature led to the release of one equivalent of P(p-tolyl3) and formation of the mono-substituted NHC rhodium complex. The reaction of isolated mono-NHC complex with another equivalent of NHC at room temperature did not result in the exchange of the second phosphine ligand. Moderate heating of the reaction to 60 °C, however, resulted in the formation of tetra-substituted NHC rhodium complex [Rh(nPr2Im)4]+[acac]-. To circumvent the loss of the other ligands in the experiments described above, a different approach was investigated to access rhodacyclopentadienes with NHC instead of phosphine ligands.
Reaction of the bis-NHC complex [Rh(κ2-O,O-acac)(nPr2Im)2] with , bis(arylbutadiynyl)alkanes at room temperature resulted 2,5-bis(arylethynyl)-rhodacyclopentadienes with the NHC ligands being cis or trans to each other as indicated by NMR spectroscopic measurements and single-crystal X-ray diffraction analysis. Isolation of clean material and a fundamental photophysical study could not be finished for reasons of time within the scope of this work.
Furthermore, shortening of the well conjugated -system of the chromophoric ligand (changing from tetraynes to diynes) was another strategy to examine the reaction behavior of theses ligands with rhodium(I) complexes and to modify the excited state behavior of the formed rhodacyclopentadienes. The reaction of [Rh(κ2-O,O-acac)(PMe3)2] with 1,7 diaryl 1,6-heptadiynes (diynes) leads to the selective formation of 2,5 bis(aryl)rhodacyclopentadienes. These compounds, however, are very weakly fluorescent with quantum yields ФPL < 1, and very short emission lifetimes in toluene at room temperature. Presumably, vibrational modes of the bis(phenyl)butadiene backbone leads to a higher rate constant for non-radiative decay and is thus responsible for the low quantum yields compared to their corresponding PMe3 complexes with the bis(phenylethynyl)butadiene backbone at room temperature. No additional phosphorescence, even at 77 K in the glass matrix is observed.
Chancing the phosphine ligands to P(p-tolyl)3, reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with 1,7-diaryl-1,6-heptadiynes, however, resulted in a metal-mediated or -catalyzed cycloaddition reaction of alkynes and leads to full conversion to dimerization and trimerization products and recovery of the rhodium(I) starting material. This is intuitive, considering that P(Ar)3 (Ar = aryl) ligands are considered weaker -donor ligands and therefore have a higher tendency to dissociate. Therefore, rhodium(I) complexes with aryl phosphines as ligands have an increasing tendency to promote catalytic reactions, while the stronger -donating ligands (PMe3 or NHCs) promote the formation of stable rhodium complexes.
Finally, in Chapter 4, the findings of the work conducted on N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (CAACs) is presented. These compounds have unique electronic and steric properties and are therefore of great interest as ligands and organo-catalysts. In this work, studies of substitution reactions involving novel carbonyl complexes of rhodium and nickel are reported. For characterization and comparison of CAACmethyl with the large amount of data available for NHC and sterically more demanding CAAC ligands, an overview on physicochemical data (electronics, sterics and bond strength) is provided.
The reaction of [Rh(-Cl)(CO)2]2 with 2 equivalents of CAACmethyl at low temperature afforded the mononuclear complex cis-[(RhCl(CO)2(CAACmethyl)]. However, reacting [Rh( Cl)(CO)2]2 with CAACmethyl at room temperature afforded a mixture of complexes. The mononuclear complex [(RhCl(CO)(CAACmethyl)2], the chloro-bridged complexes [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 and a carbon monoxide activation product were formed. The carbon monoxide activation product is presumably formed via the reaction of two equivalents of the CAAC with CO to give the bis-carbene adduct of CO, and subsequent rearrangement via migration of the Dipp moiety. While classical N-heterocyclic carbenes are not electrophilic enough to react with CO, related diamidocarbenes and alkyl(amino)carbenes undergo addition reactions with CO to give the corresponding ketenes. Consequently, to obtain the CAAC-disubstituted mononuclear complex selectively, 8 equivalents of CAACmethyl were reacted with 1 equivalent of [Rh(-Cl)(CO)2]2. For the evaluation of TEP values, [Ni(CO)3(CAAC)] was synthesized in collaboration with the group of Radius. With the complexes [(RhCl(CO)(CAACmethyl)2] and [Ni(CO)3(CAAC)] in hand, it was furthermore possible to examine the electronic and steric parameters of CAACmethyl. Like its bulkier congeners CAACmenthyl and CAACcy, the methyl-substituted CAAC is proposed to be a notably stronger -donor than common NHCs. While it has a very similar TEP value of 2046 cm-1, it additionally possess superior -acceptor properties (P = 67.2 ppm of phosphinidene adduct).
CAACs appear to be very effective in the isolation of a variety of otherwise unstable main group and transition metal diamagnetic and paramagnetic species. This is due to their low-lying LUMO and the small singlet-triplet gap. These electronic properties also allow free CAACs to activate small molecules with strong bonds. They also bind strongly to transition metal centers, which enables their use under harsh conditions. One recent development is the use of CAACs as ligands in transition metal complexes, which previously were only postulated as short-lived catalytic intermediates.[292,345] The availability of these reactive species allows for a better understanding of known catalytic reactions and the design of new catalysts and, moreover, new applications. For example Radius et al.[320] prepared a CAAC complex of cobalt as a precursor for thin-film deposition and Steffen et al.[346] reported a CAAC complex of copper with very high photoluminescent properties, which could be used in LED devices. With the development of cheap and facile synthetic methods for the preparation of CAACs and their corresponding transition metals complexes, as well as the knowledge of their electronic properties, it is safe to predict that applications in and around this field of chemistry will continue to increase.
The crystal structures of the (R)-enantiomer (2b) and the racemate (1 b) of (cyclohexyl)phenyl[2- (pyrrolidin-1-yl)ethyl]silanol (sila--procyclidine) have been determined by X -ray structural analysis. The absolute configuration of (2b) was established. (2b) crystallizes in the orthorhombic space group P2\(_1\)2\(_1\)2\(_1\), with a = 15.221 (1 ), b = 17.967(1 ), c = 6.463(1) A, and Z = 4. (1 b) crystallizes in the monoclinic space group P2\(_1\)/c, with a = 6.441 (1 ), b = 17.1 82(7), c = 16.707(4) A, ß = 1 03.86(2r, and Z = 4. The structures were refined to respective R factors of 0.044 and 0.058. The molecular conformation of sila-procyclidine is identical in the two different structures. lntermolecular 0-H • • • N hydrogen bonding is observed in both crystallattices.ln (1 b) (R)- and (S)-configurated molecules form centrosymmetric dimers, in (2b) the (R)-configurated molecules are linked into infinite chains parallel to the c axis. The (R)-configurated sila--procyclidine (2b) has higher affinity for ileal and atrial muscarinic receptors of the guinea pig than the (S)-configurated enantiomer (3b).
This theses deals with the syntheses and the coordination behaviour of polyimidosulfur anions like S(NR)32–, S(NR)42–, RS(NR)2– or RS(NR)3–, the nitrogen analogues of the well known oxo-anions SO32–, SO42–, RSO2– and RSO3–. The first aim was the synthesis of a triimidosulfite with three different NR-substituents, a so called asymmetrical triimidosulfite. In all reactions, that have been carried out to obtain a triimidosulfite with three (or two) different residues at nitrogen, the final product was always the dilithium sulfide adduct. The syntheses of chiral alkylenediimidosulfites was successful. Similar to Corey’s S-ylides (R2(O)S+––CR2) and Wittig’s phosphonium ylides (R3P+––CR2) these molecules contain a positively charged sulfur atom next to a carbanionic centre. The structures of the alkylenediimidosulfites are not influenced by the different substituents at nitrogen and carbon, respectively. In each case a doublecubic structure is received. The first members of a completely new class of compounds were synthesised: the aryl-bis-(diimidosulfinates). In this compounds two SN2 units are connected via a heteroaromatic linker, containing a potential donor centre in metal coordination. They represent, like the known alkyldiimidosulfinates, dipodal monoanionic ligands. In the field of sulfur (VI) chemistry the syntheses of aryltriimidosulfonates were successful. Hitherto it was believed, that only spatial less demanding lithium organics could be added to a S=N double bond in S(NtBu)3. This assumption was confirmed by the fact that methyl- and phenylacetylene-triimidosulfonate were the only known alkylsulfonates. Nevertheless, the addition of several lithiumheteroarenes to sulfurtriimide worked without difficulties. If the shape of the nucleophile permits to slot in between the NtBu substituents and to approach the electrophilic sulfur in the sulfurtriimide from the side rather than in an orthogonal angle, the addition reaction works smoothly. Although the steric demand of the tris(tert.-butyl)triimidosulfonate unit is very high, the synthesis of thiophene-bis-(triimidosulfonate) worked. The sulfonate moieties function as dipodal ligands.
Luminescent organotransition metal complexes are of much current interest. As the large spin-orbit coupling of 2nd and 3rd row transition metals usually leads to rapid intersystem crossing from S1 to T1, which enables phosphorescence, there is a special interest in using triplet-emitting materials in organic or organometallic light emitting diodes (OLEDs). Marder et al. have found that, reductive coupling of both para-R-substituted diarylbutadiynes and diaryldodecatetraynes on Rh(PMe3)4X leads to quantitative yields of bis(arylethynyl)-rhodacyclopentadienes with complete regiospecificity (R = BMes2, H, Me, OMe, SMe, CF3, CN, CO2Me, NMe2, NO2, C≡C-TMS and X = -C≡C-TMS, -C≡C-C6H4-4-NMe2, -C≡C-C≡C-C6H4-4-NPh2, Me, Cl).47,49 Unexpectedly, these compounds show intense fluorescence rather than phosphorescence (ɸf = 0.33-0.69, t = 1.2 3.0 ns). The substituent R has a significant influence on the photophysical properties, as absorption and emission are both bathochromically shifted compared to R = H, especially for R = π-acceptor.
To clarify the mechanism of the formation of the rhodacyclopentadienes, and to investigate further their unique photophysical properties, a series of novel, luminescent rhodacyclopentadienes with dithiocarbamate as a bidentate ligand at the rhodium centre has been synthesised and characterised (R = NO2, CO2Me, Me, NMe2, SMe, Ar = C6F4-4-OMe). The rhodacyclopentadienes have been formed via reductive coupling of diaryl undecatetraynes with [Rh(k2-S,S`-S2CNEt2)(PMe3)2]. The structures of a series of such compounds were solved by single crystal X-ray diffraction and are discussed in this work. The compounds were fully characterised via NMR, UV/Vis and photoluminescence spectroscopy as well as by elemental analysis, high-resolution mass spectrometry (HRMS) and X-ray diffraction.
When heating the reactions, another isomer is formed to a certain extent. The so-called dibenzorhodacyclopentadienes already appeared during earlier studies of Marder et al., when acetylacetonate (acac) was employed as the bidentate ligand at the Rh-centre. They are probably formed via a [4+2] cycloaddition reaction and C-H activation, followed by a β-H shift.
Use of the perfluorinated phenyl moiety Ar = C6F4-4-OMe provided a total new insight into the mechanism of formation of the rhodacyclopentadiene isomers and other reactions. Besides the formation of the expected rhodacyclopentadiene, a bimetallic compound was generated, isolated and characterised via X-ray crystallography and NMR spectroscopy, elemental analysis and high resolution mass spectrometry.
For further comparison, analogous reactions with [Rh(k2 S,S` S2CNEt2)(PPh3)2] and a variety of diaryl undecatetraynes (R = NO2 CO2Me, Me, NMe2, SMe, Ar = C6F4-4-OMe) were carried out. They also yield the expected rhodacyclopentadienes, but quickly react with a second or even third equivalent of the tetraynes to form, catalytically, alkyne cyclotrimerisation products, namely substituted benzene derivatives (dimers and trimers), which are highly luminescent. The rhodacyclopentadienes (R = NO2, CO2Me, Me, SMe, Ar = C6F4-4-OMe) are stable and were isolated. The structures of a series of these compounds were obtained via single crystal X-ray crystallography and the compounds were fully characterised via NMR, UV/Vis and photoluminescence spectroscopy as well as by elemental analysis and HRMS.
Another attempt to clarify the mechanism of formation of the rhodacyclopentadienes involved reacting a variety of diaryl 1,3-butadiynes (R = CO2Me, Me, NMe2, naphthyl) with [Rh(k2 S,S` S2CNEt2)(PMe3)2]. The reactions stop at an intermediate step, yielding a 1:1 trans π-complex, confirmed by single crystal X-ray diffraction and NMR spectroscopy. Only after several weeks, or under forcing conditions (µw / 80 °C, 75 h), the formation of another major product occurs, having bound a second diaryl 1,3-butadiyne. Based on earlier results of Murata, the product is identified as an unusual [3+2] cycloaddition product, ϭ-bound to the rhodium centre.
The isolation and structural characterization of the cyanido-substituted metalated ylides [Ph3P−C−CN]M (1-M; M=Li, Na, K) are reported with lithium, sodium, and potassium as metal cations. In the solid-state, most different aggregates could be determined depending on the metal and additional Lewis bases. The crown-ether complexes of sodium (1-Na) and potassium (1-K) exhibited different structures, with sodium preferring coordination to the nitrogen end, whereas potassium binds in an unusual η2-coordination mode to the two central carbon atoms. The formation of the yldiide was accompanied by structural changes leading to shorter C−C and longer C−N bonds. This could be attributed to the delocalization of the free electron pairs at the carbon atom into the antibonding orbitals of the CN moiety, which was confirmed by IR spectroscopy and computational studies. Detailed density functional theory calculations show that the changes in the structure and the bonding situation were most pronounced in the lithium compounds due to the higher covalency.
Ten thiosemicarbazone ligands obtained by condensation of pyridine-2-carbaldehyde, quinoline-2-carbaldehyde, 2-acetylpyridine, 2-acetylquinoline, or corresponding 2-pyridyl ketones with thiosemicarbazides RNHC(S)NHNH\(_{2}\) and R=CH\(_{3}\), C\(_{6}\)H\(_{5}\) were prepared in good yield. The reaction of [PdCl\(_{2}\)(cod)] with cod=1,5-cyclooctadiene or K\(_{2}\)[PtCl\(_{4}\)] resulted in a total of 17 Pd(II) and Pt(II) complexes isolated in excellent purity, as demonstrated by \(^{1}\)H, \(^{13}\)C, and, where applicable, \(^{195\)Pt NMR spectroscopy combined with CHNS analysis. The cytotoxicity of the title compounds was studied on four human glioblastoma cell lines (GaMG, U87, U138, and U343). The most active compound, with a Pd(II) metal centre, a 2-quinolinyl ring, and methyl groups on both the proximal C and distal N atoms exhibited an EC\(_{50}\) value of 2.1 μM on the GaMG cell lines, thus being slightly more active than cisplatin (EC\(_{50}\) 3.4 μM) and significantly more potent than temozolomide (EC\(_{50}\) 67.1 μM). Surprisingly, the EC\(_{50}\) values were inversely correlated with the lipophilicity, as determined with the “shake-flask method”, and decreased with the length of the alkyl substituents (C\(_{1}\)>C\(_{8}\)>C\(_{10}\)). Correlation with the different structural motifs showed that for the most promising anticancer activity, a maximum of two aromatic rings (either quinolinyl or pyridyl plus phenyl) combined with one methyl group are favoured and the Pd(II) complexes are slightly more potent than their Pt(II) analogues.
A number of novel alkynyl-functionalized diarylbis(dimethylamino)diboranes(4) are prepared by salt metathesis, and the appended alkynyl groups are subjected to hydroboration. Their reactions with monohydroboranes lead to discrete boryl-appended diborane(4) species, while dihydroboranes induce their catenation to oligomeric species, the first known examples of well-characterized macromolecular species with B−B bonds. The oligomeric species were found to comprise up to ten repeat units and are soluble in common organic solvents. Some of the oligomeric species have good air stability and all were characterized by NMR and vibrational spectroscopy and size-exclusion chromatography techniques.
Fluorinated groups are essential for drug design, agrochemicals, and materials science. The bis(trifluoromethyl)amino group is an example of a stable group that has a high potential. While the number of molecules containing perfluoroalkyl, perfluoroalkoxy, and other fluorinated groups is steadily increasing, examples with the N(CF\(_{3}\))\(_{2}\) group are rare. One reason is that transfer reagents are scarce and metal-based storable reagents are unknown. Herein, a set of Cu\(^{I}\) and Ag\(^{I}\) bis(trifluoromethyl)amido complexes stabilized by N- and P-donor ligands with unprecedented stability are presented. The complexes are stable solids that can even be manipulated in air for a short time. They are bis(trifluoromethyl)amination reagents as shown by nucleophilic substitution and Sandmeyer reactions. In addition to a series of benzylbis(trifluoromethyl)amines, 2-bis(trifluoromethyl)amino acetate was obtained, which, upon hydrolysis, gives the fluorinated amino acid N,N-bis(trifluoromethyl)glycine.
The reaction of aryl‐ and amino(dihydro)boranes with dibora[2]ferrocenophane 1 leads to the formation 1,3‐trans ‐dihydrotriboranes by formal hydrogenation and insertion of a borylene unit into the B=B bond. The aryltriborane derivatives undergo reversible photoisomerization to the cis ‐1,2‐μ‐H‐3‐hydrotriboranes, while hydride abstraction affords cationic triboranes, which represent the first doubly base‐stabilized B3H4\(^+\) analogues.
Whereas the reduction of N-heterocyclic carbene (NHC)-stabilised cymantrenyldibromoboranes, (NHC)BBr\(_2\)Cym, in benzene results in formation of the corresponding diborenes (NHC)\(_2\)B\(_2\)Cym\(_2\), a change of solvent to THF yields a borylene of the form (NHC)\(_2\)BCym, stabilised through its boratafulvene resonance form.
Twisted boron-based biradicals featuring unsaturated C\(_2\)R\(_2\) (R=Et, Me) bridges and stabilization by cyclic (alkyl)(amino)carbenes (CAACs) were recently prepared. These species show remarkable geometrical and electronic differences with respect to their unbridged counterparts. Herein, a thorough computational investigation on the origin of their distinct electrostructural properties is performed. It is shown that steric effects are mostly responsible for the preference for twisted over planar structures. The ground-state multiplicity of the twisted structure is modulated by the σ framework of the bridge, and different R groups lead to distinct multiplicities. In line with the experimental data, a planar structure driven by delocalization effects is observed as global minimum for R=H. The synthetic elusiveness of C\(_2\)R\(_2\)-bridged systems featuring N-heterocyclic carbenes (NHCs) was also investigated. These results could contribute to the engineering of novel main group biradicals.
Photosynthesis is the most fundamental process of life on earth. The biological production of oxygen in plant photosynthesis occurs in photosystem II (PSII). Here two water molecules are coupled in a four-electron oxidation to one O2 molecule, catalyzed by a tetranuclear manganese complex, known as the oxygen-evolving complex (OEC). In this thesis, density-functional theory (DFT) methods were validated and subsequently employed to study structures, spin-density distributions and EPR parameters of mono-, di-, and tetranuclear complexes with regard to the OEC. The goal was to draw conclusions on the molecular and electronic structure of the OEC.
Phosphines are important ligands in homogenous catalysis and have been crucial for many advances, such as in cross-coupling, hydrofunctionalization, or hydrogenation reactions. Herein we report the synthesis and application of a novel class of phosphines bearing ylide substituents. These phosphines are easily accessible via different synthetic routes from commercially available starting materials. Owing to the extra donation from the ylide group to the phosphorus center the ligands are unusually electron-rich and can thus function as strong electron donors. The donor capacity surpasses that of commonly used phosphines and carbenes and can easily be tuned by changing the substitution pattern at the ylidic carbon atom. The huge potential of ylide-functionalized phosphines in catalysis is demonstrated by their use in gold catalysis. Excellent performance at low catalyst loadings under mild reaction conditions is thus seen in different types of transformations.
To understand basic principles about the interaction of electromagnetic radiation with matter is often a challenge in chemical education due to the difficult theoretical background of this topic. The present contribution therefore offers an experimental based introduction into the basic principles of UV/Vis spectroscopy following a three-step strategy. The starting point is to construct a simple self-built spectrometer working within the visible range of light. Learners can explore the most important components of such a device and understand their functions without previous knowledge. In a second step, emission spectra of different common light sources are investigated and compared. Finally, spectroscopic experiments are suggested for chemical education such as the qualitative detection of cations and the quantitative analysis of the dye carmine in food. This context-based introduction links chemical applications with the everyday life. It can be presumed that this way, learners are provided an easier access to radiation-matter interaction.
cAAC‐Stabilized 9,10‐diboraanthracenes—Acenes with Open‐Shell Singlet Biradical Ground States
(2020)
Narrow HOMO–LUMO gaps and high charge‐carrier mobilities make larger acenes potentially high‐efficient materials for organic electronic applications. The performance of such molecules was shown to significantly increase with increasing number of fused benzene rings. Bulk quantities, however, can only be obtained reliably for acenes up to heptacene. Theoretically, (oligo)acenes and (poly)acenes are predicted to have open‐shell singlet biradical and polyradical ground states, respectively, for which experimental evidence is still scarce. We have now been able to dramatically lower the HOMO–LUMO gap of acenes without the necessity of unfavorable elongation of their conjugated π system, by incorporating two boron atoms into the anthracene skeleton. Stabilizing the boron centers with cyclic (alkyl)(amino)carbenes gives neutral 9,10‐diboraanthracenes, which are shown to feature disjointed, open‐shell singlet biradical ground states.
Geringe HOMO-LUMO-Abstände und eine hohe Ladungsträgermobilität prädestinieren die höheren Acene für Anwendungen im Bereich der Organoelektronik. Die Leistungsfähigkeit derartiger Verbindungen steigt hierbei dramatisch mit der Anzahl anellierter Benzolringe. Größere Acenmengen sind synthetisch bisher jedoch nur für Acene bis Heptacen verlässlich zugänglich. Theoretischen Studien zufolge besitzen (Oligo)acene offenschalige Singulettbiradikal- und (Poly)acene polyradikalische Grundzustände. Eindeutige experimentelle Belege für diese Vorhersagen sind hingegen äußerst selten. Durch den Einbau von zwei Boratomen in das Anthracengrundgerüst konnten wir den HOMO-LUMO-Abstand von Acenen dramatisch verringern und zwar ohne die Notwendigkeit einer Ausweitung des konjugierten π-Systems. Stabilisierung der Borzentren durch cyclische (Alkyl)(amino)carbene lieferte hierbei neutrale 9,10-Diboraanthracene mit disjunkten, offenschaligen Singulettbiradikal-Grundzuständen.
This Ph.D. thesis has addressed several main issues in current ASSB research within four studies. Ceramic ASSBs are meant to enable the implementation of Li-metal anodes and high voltage cathode materials, which would increase energy density, power density, life time as well as safety aspects in comparison with commercially available liquid electrolyte LiBs. In this thesis, several scientific questions arising on the cathode side of ASSBs have been focused on. With respect to the target system of a ternary composite bulk cathode consisting of ceramic active material, ceramic SSE and an electrically conductive component, studies about the thermal stabilities of these components and their impact on the electrochemical performance have been conducted. Particulate bulk cathode composites have to fulfil electrochemical, chemical, mechanical and structural requirements in order to compete with commercial LiBs. Particularly, the production process requires high-temperature sintering to obtain firmly bonded contacts in order to maximize the electrochemically active area, charge transfer and ionic conduction. However, interdiffusion, intermixing and decomposition of the initial components during sintering result in low-performing ASSBs so far.
These side reactions during high-temperature treatment have been investigated in order to gain a better understanding of these mechanisms and to enable a better controlling of the manufacturing process as well as to simplify the choice of material combinations. The first two parts of this thesis deal with the thermal stability of the ceramic SSE LATP in combination with various active materials and with the validation of a probable improvement of the sintering process due to liquid phase sintering of LATP by adding Li3PO4. In the third and fourth parts, the impact of interdiffusion, intermixing and decomposition on the electrochemical performance of TF-SSBs based on the active material LMO and the ceramic SSE Ga-LLZO has been investigated.
The concepts of aromaticity and antiaromaticity have a long history, and countless demonstrations of these phenomena have been made with molecules based on elements from the p, d, and f blocks of the periodic table. In contrast, the limited oxidation‐state flexibility of the s‐block metals has long stood in the way of their participation in sophisticated π‐bonding arrangements, and truly antiaromatic systems containing s‐block metals are altogether absent or remain poorly defined. Using spectroscopic, structural, and computational techniques, we present herein the synthesis and authentication of a heterocyclic compound containing the alkaline earth metal beryllium that exhibits significant antiaromaticity, and detail its chemical reduction and Lewis‐base‐coordination chemistry.
Crystals of the R, S diastereoisomer of [Cp(CO)\(_2\)-FeSiCH\(_3\)F]\(_2\)O are monoclinic, space group ndc (No. 14), with a = 846.0(3) [836.4(1»), b = 768.0(3) [757.1(1»), c = 1548.5(4) [1522.3(2)] pm, {3 = 97.34(3t [97.47(3t] at 300 K [120 K] with Z = 2. Even at 120 K the Si-O-Si fragment is found to be strictly linear due to crystallographically imposed symmetry. To explain the unusual electron distribution derived from the X-ray data collected, several types of possible disorders are discussed, none of which leads to a satisfying explanation. Retaining the Ci symmetry (linear Si-O-Si fragment in the final model) the important bond lengths are Fe-Si 226.7(1) [226.5(1)] pm, Si-F 160.9(2) [161.8(2)] pm, Si-O 160.3(1) [161.1(1)] pm, Si-C 185.0(3) [185.6(3)] pm. The electronic features of this compound were probed via molecular orbital calculations of the extended Hiickel type. It was found that the lone pairs on the siloxane oxygen were tipped away from cylindrical symmetry. The tipping was directed toward the fluorine substituents on the silicon atoms and away from the CpFe(CO)\(_2\) units. A pertubational approach was utilized to rationalize this effect.
A series of methylene-bridged bis(triarylboranes) has been synthesized via two complementary routes using metal-free catalytic Si/B exchange condensation under mild conditions. The title compounds comprise two borane moieties that show effective internal π-conjugation involving the respective boron centers and the adjacent hetaryl groups. Conjugation between both borane units, however, is disrupted by the aliphatic linker. Cyclic voltammetry revealed minimal electronic communication between the boron centers, as evidenced by two closely spaced reduction processes. The UV-vis spectra showed bathochromic shifted absorption bands compared to related monoboranes, which is attributed to the methylene bridge. A further red-shift results upon introduction of methyl or SiMe\(_3\) groups at the terminal thiophene rings.
Industrially used semiconducting materials, building blocks of modern electronics and computer industry, are mostly based on inorganic, crystalline solids, which have the drawback of relatively high production costs. As an alternative, organic pi-conjugated systems show enhanced flexibility and processability as well as the opportunity to obtain light-weight materials. They have emerged as attractive candidates, especially since elements beyond hydrogen and carbon can be used to create pi-conjugated frameworks. In recent years, pi-conjugated oligomers and polymers with tricoordinate boron centers incorporated into the main chain of such organic polymers have attracted considerable attention as the interaction of the vacant p orbital on boron with an adjacent pi system of the chain leads to extended conjugated materials. These materials show intriguing optical and electronic properties and potential applications in organic electronics and optoelectronics (OLEDs, OFETs, photovoltaics) or as sensory materials.
In this thesis, a catalytic Si/B exchange reaction protocol is used as a facile and highly effective B-C bond formation method to synthesize organoboron molecules, oligomers, polymers and macrocycles. This reaction is applied to synthesize a series of thienyl- and furylborane based materials. Special focus is on furylborane based materials, which, in general, have been only scarcely explored so far. This is mainly due to synthetic challenges since furan decomposes readily in the presence of light and oxygen. Our mild and highly selective reaction protocol in combination with sufficient kinetic protection of the boron centers gives access to a series of extended organoboranes featuring furylborane units in the main chain. Furthermore, kinetically stabilized furylboranes are established as highly robust and versatile building blocks for pi conjugated materials. The obtained materials reveal remarkable luminescence properties. The scope of potential starting materials was investigated by a catalyst screening, demonstrating that the Si/B exchange reaction can also be performed for less reactive aryldichloroboranes. Furthermore, borazine-based hybrid cyclomatrix microspheres have been synthesized via a Si/B exchange condensation reaction under precipitation polymerization conditions. Finally, synthetic routes to tetrabora- and diboraporphyrinogens were attempted in a multi-step reaction procedure. In the case for tetraboraporphyrinogens, the final macrocyclization reaction under pseudo high-dilution conditions afforded a mixture of macrocycles with different ring sizes. UV-vis and fluorescence spectroscopic analysis indicated significant differences in comparison to their linear congeners.
Sensitivity and selectivity remain the central technical requirement for analytical devices, detectors and sensors. Especially in the gas phase, concentrations of threat substances can be very low (e.g. explosives) or have severe effects on health even at low concentrations (e.g. benzene) while it contains many potential interferents. Preconcentration, facilitated by active or passive sampling of air by an adsorbent, followed by thermal desorption, results in these substances being released in a smaller volume, effectively increasing their concentration.
Traditionally, a wide range of adsorbents, such as active carbons or porous polymers, are used for preconcentration. However, many adsorbents either show chemical reactions due to active surfaces, serious water retention or high background emission due to thermal instability. Metal-organic frameworks (MOFs) are a hybrid substance class, composed inorganic and organic building blocks, being a special case of coordination polymers containing pores. They can be tailored for specific applications such as gas storage, separation, catalysis, sensors or drug delivery.
This thesis is focused on investigating MOFs for their use in thermal preconcentration for airborne detection systems. A pre-screening method for MOF-adsorbate interactions was developed and applied, namely inverse gas chromatography (iGC). Using this pulse chromatographic method, the interaction of MOFs and molecules from the class of explosives and volatile organic compounds was studied at different temperatures and compared to thermal desorption results.
In the first part, it is shown that archetype MOFs (HKUST-1, MIL-53 and Fe-BTC) outperformed the state-of-the-art polymeric adsorbent Tenax® TA in nitromethane preconcentration for a 1000 (later 1) ppm nitromethane source. For HKUST-1, a factor of more than 2000 per g of adsorbent was achieved, about 100 times higher than for Tenax. Thereby, a nitromethane concentration of 1 ppb could be increased to 2 ppm. High enrichment is addressed to the specific interaction of the nitro group as by iGC, which was determined by comparing nitromethane’s free enthalpy of adsorption with the respective saturated alkane. Also, HKUST-1 shows a similar mode of sorption (enthalpy-entropy compensation) for nitro and saturated alkanes.
In the second part, benzene of 1 ppm of concentration was enriched with a similar setup, using 2nd generation MOFs, primarily UiO-66 and UiO-67, under dry and humid (50 %rH) conditions using constant sampling times. Not any MOF within the study did surpass the polymeric Tenax in benzene preconcentration. This is most certainly due to low sampling times – while Tenax may be highly saturated after 600 s, MOFs are not. For regular UiO-66, four differently synthesized samples showed a strongly varying behavior for dry and humid enrichment which cannot be completely explained. iGC investigations with regular alkanes and BTEX compounds revealed that confinement factors and dispersive surface energy were different for all UiO-66 samples. Using physicochemical parameters from iGC, no unified hypothesis explaining all variances could be developed.
Altogether, it was shown that MOFs can replace or add to state-of-the-art adsorbents for the enrichment of specific analytes with preconcentration being a universal sensitivity-boosting concept for detectors and sensors. Especially with iGC as a powerful screening tool, most suitable MOFs for the respective target analyte can be evaluated. iGC can be used for determining “single point” retention volumes, which translate into partition coefficients for a specific MOF × analyte × temperature combination.
Bisdiynes undergo Pd(0)-catalyzed cyclization, forming azulene and naphthalene products. When dibenzylideneacetone is present in the reaction, it undergoes a [2+2+2] cyclization with the bisdiyne, forming cyclohexadiene derivatives. Ni(0) catalyzes the [2+2+2] cycloaddition of diynes with tolanes towards alkynylated o-terphenyl derivatives. The D-A substituted products are solvatochromic, fluorescent dyes with high quantum yields and short lifetimes. Bis-triarylborane tetrayne dyes were synthesized in both neutral and tetracationic forms, as potential DNA/RNA sensor. Both molecules are weakly fluorescent in solution and exhibit characteristic alkyne absorptions in the Raman spectra. Tributyl phosphine catalyzes the trans-hydroboration of 1,3-butadiynes with HBpin. We confirmed experimentally via NMR and HRMS experiments, that phosphine attack on the diyne is a key step in the catalytic cycle.
Chiral 2-alkylbranched acids, esters and alcohols. Preparation and stereospecific flavour evaluation
(1991)
Racemic 2-alkylbranched acids are transformed to diastereomeric derivatives with (S)-2-hydroxy-3-phenylpropionic acid-N-methylamide or (S)-(-)-l-phenylethylamine and separated by liquid chromatography to pure diastereoisomers, which are subsequently hydrolyzed to yield optically pure acids. Enantiomeric alcohols are generated by LiAlH4-reduction of the corresponding acids, esters are synthesized by different methods. The odour impression of the enantiomeric compounds is investigated.
Pharmacokinetic properties of the antimuscarinic drug [\(^3\)H]-hexahydro-sila-difenidol in the rat
(1990)
The pharmacokinetics of tritiated hexahydrosila- difenidol ([\(^3\)H]-HHSiD) were examined in rats. Furthermore, the distribution of radioactivity was studied by means of whole body autoradiography. After i. v. administration of 2.9 mg/kg HHSiD plus [\(^3\)H]-HHSiD to anaesthetized rats bearing a catheter implanted in the ductus choledochus and receiving a mannitol infusion, HHSiD was rapidly distributed and metabolized. Only 5% ofthe radioactivity was recovered in blood after 23 s and 0.4% after 2.5 h. 64% of the plasma radioactivity could be extracted with hexane from the samples taken 23 s after administration. 52% of the radioactivity was eliminated within 2.5 h, 13% by urinary and 39% by biliary excretion. Following oral administration of 8.6 mg/kg HHSiD plus [\(^3\)H]-HHSiD there was an absorption of approximately one fourth of the administered radioactivity within 4 h. By means of whole body autoradiography (i. v. injection) as well as by tissue distribution measurement the highest Ievels of radioactivity were found in bile, urine, lung, kidney, adrenals, liver and .pancreas. Thus, after i. v. administration to rats HHSiD is rather quickly distributed, metabolized and excreted. This explains its low antimuscarinic potency in vivo.