Refine
Has Fulltext
- yes (16)
Is part of the Bibliography
- yes (16)
Document Type
- Doctoral Thesis (15)
- Bachelor Thesis (1)
Keywords
- Kleinsatellit (3)
- Distributed Control (2)
- Hardware (2)
- Kollisionsschutz (2)
- Satellit (2)
- Software (2)
- 3D Reconstruction (1)
- 3D-Rekonstruktion (1)
- Ablaufplanung (1)
- Arterie (1)
Institute
Sonstige beteiligte Institutionen
EU-Project number / Contract (GA) number
- 320377 (1)
Der Betrieb von Satelliten wird sich in Zukunft gravierend ändern. Die bisher ausgeübte konventionelle Vorgehensweise, bei der die Planung der vom Satelliten auszuführenden Aktivitäten sowie die Kontrolle hierüber ausschließlich vom Boden aus erfolgen, stößt bei heutigen Anwendungen an ihre Grenzen. Im schlimmsten Fall verhindert dieser Umstand sogar die Erschließung bisher ungenutzter Möglichkeiten. Der Gewinn eines Satelliten, sei es in Form wissenschaftlicher Daten oder der Vermarktung satellitengestützter Dienste, wird daher nicht optimal ausgeschöpft.
Die Ursache für dieses Problem lässt sich im Grunde auf eine ausschlaggebende Tatsache zurückführen: Konventionelle Satelliten können ihr Verhalten, d.h. die Folge ihrer Tätigkeiten, nicht eigenständig anpassen. Stattdessen erstellt das Bedienpersonal am Boden - vor allem die Operatoren - mit Hilfe von Planungssoftware feste Ablaufpläne, die dann in Form von Kommandosequenzen von den Bodenstationen aus an die jeweiligen Satelliten hochgeladen werden. Dort werden die Befehle lediglich überprüft, interpretiert und strikt ausgeführt. Die Abarbeitung erfolgt linear. Situationsbedingte Änderungen, wie sie vergleichsweise bei der Codeausführung von Softwareprogrammen durch Kontrollkonstrukte, zum Beispiel Schleifen und Verzweigungen, üblich sind, sind typischerweise nicht vorgesehen. Der Operator ist daher die einzige Instanz, die das Verhalten des Satelliten mittels Kommandierung, per Upload, beeinflussen kann, und auch nur dann, wenn ein direkter Funkkontakt zwischen Satellit und Bodenstation besteht. Die dadurch möglichen Reaktionszeiten des Satelliten liegen bestenfalls bei einigen Sekunden, falls er sich im Wirkungsbereich der Bodenstation befindet. Außerhalb des Kontaktfensters kann sich die Zeitschranke, gegeben durch den Orbit und die aktuelle Position des Satelliten, von einigen Minuten bis hin zu einigen Stunden erstrecken. Die Signallaufzeiten der Funkübertragung verlängern die Reaktionszeiten um weitere Sekunden im erdnahen Bereich. Im interplanetaren Raum erstrecken sich die Zeitspannen aufgrund der immensen Entfernungen sogar auf mehrere Minuten. Dadurch bedingt liegt die derzeit technologisch mögliche, bodengestützte, Reaktionszeit von Satelliten bestenfalls im Bereich von einigen Sekunden.
Diese Einschränkung stellt ein schweres Hindernis für neuartige Satellitenmissionen, bei denen insbesondere nichtdeterministische und kurzzeitige Phänomene (z.B. Blitze und Meteoreintritte in die Erdatmosphäre) Gegenstand der Beobachtungen sind, dar. Die langen Reaktionszeiten des konventionellen Satellitenbetriebs verhindern die Realisierung solcher Missionen, da die verzögerte Reaktion erst erfolgt, nachdem das zu beobachtende Ereignis bereits abgeschlossen ist.
Die vorliegende Dissertation zeigt eine Möglichkeit, das durch die langen Reaktionszeiten entstandene Problem zu lösen, auf. Im Zentrum des Lösungsansatzes steht dabei die Autonomie. Im Wesentlichen geht es dabei darum, den Satelliten mit der Fähigkeit auszustatten, sein Verhalten, d.h. die Folge seiner Tätigkeiten, eigenständig zu bestimmen bzw. zu ändern. Dadurch wird die direkte Abhängigkeit des Satelliten vom Operator bei Reaktionen aufgehoben. Im Grunde wird der Satellit in die Lage versetzt, sich selbst zu kommandieren.
Die Idee der Autonomie wurde im Rahmen der zugrunde liegenden Forschungsarbeiten umgesetzt. Das Ergebnis ist ein autonomes Planungssystem. Dabei handelt es sich um ein Softwaresystem, mit dem sich autonomes Verhalten im Satelliten realisieren lässt. Es kann an unterschiedliche Satellitenmissionen angepasst werden. Ferner deckt es verschiedene Aspekte des autonomen Satellitenbetriebs, angefangen bei der generellen Entscheidungsfindung der Tätigkeiten, über die zeitliche Ablaufplanung unter Einbeziehung von Randbedingungen (z.B. Ressourcen) bis hin zur eigentlichen Ausführung, d.h. Kommandierung, ab. Das Planungssystem kommt als Anwendung in ASAP, einer autonomen Sensorplattform, zum Einsatz. Es ist ein optisches System und dient der Detektion von kurzzeitigen Phänomenen und Ereignissen in der Erdatmosphäre.
Die Forschungsarbeiten an dem autonomen Planungssystem, an ASAP sowie an anderen zu diesen in Bezug stehenden Systemen wurden an der Professur für Raumfahrttechnik des Lehrstuhls Informatik VIII der Julius-Maximilians-Universität Würzburg durchgeführt.
This thesis describes the functional principle of FARN, a novel flight controller for Unmanned Aerial Vehicles (UAVs) designed for mission scenarios that require highly accurate and reliable navigation. The required precision is achieved by combining low-cost inertial sensors and Ultra-Wide Band (UWB) radio ranging with raw and carrier phase observations from the Global Navigation Satellite System (GNSS). The flight controller is developed within the scope of this work regarding the mission requirements of two research projects, and successfully applied under real conditions.
FARN includes a GNSS compass that allows a precise heading estimation even in environments where the conventional heading estimation based on a magnetic compass is not reliable. The GNSS compass combines the raw observations of two GNSS receivers with FARN’s real-time capable attitude determination. Thus, especially the deployment of UAVs in Arctic environments within the project for ROBEX is possible despite the weak horizontal component of the Earth’s magnetic field.
Additionally, FARN allows centimeter-accurate relative positioning of multiple UAVs in real-time. This enables precise flight maneuvers within a swarm, but also the execution of cooperative tasks in which several UAVs have a common goal or are physically coupled. A drone defense system based on two cooperative drones that act in a coordinated manner and carry a commonly suspended net to capture a potentially dangerous drone in mid-air was developed in conjunction with the
project MIDRAS.
Within this thesis, both theoretical and practical aspects are covered regarding UAV development with an emphasis on the fields of signal processing, guidance and control, electrical engineering, robotics, computer science, and programming of embedded systems. Furthermore, this work aims to provide a condensed reference for further research in the field of UAVs.
The work describes and models the utilized UAV platform, the propulsion system, the electronic design, and the utilized sensors. After establishing mathematical conventions for attitude representation, the actual core of the flight controller, namely the embedded ego-motion estimation and the principle control architecture are outlined. Subsequently, based on basic GNSS navigation algorithms, advanced carrier phase-based methods and their coupling to the ego-motion estimation framework are derived. Additionally, various implementation details and optimization steps of the system are described. The system is successfully deployed and tested within the two projects. After a critical examination and evaluation of the developed system, existing limitations and possible improvements are outlined.
Ongoing changes in spaceflight – continuing miniaturization, declining costs of rocket launches and satellite components, and improved satellite computing and control capabilities – are advancing Satellite Formation Flying (SFF) as a research and application area. SFF enables new applications that cannot be realized (or cannot be realized at a reasonable cost) with conventional single-satellite missions. In particular, distributed Earth observation applications such as photogrammetry and tomography or distributed space telescopes require precisely placed and controlled satellites in orbit.
Several enabling technologies are required for SFF, such as inter-satellite communication, precise attitude control, and in-orbit maneuverability. However, one of the most important requirements is a reliable distributed Guidance, Navigation and Control (GNC) strategy. This work addresses the issue of distributed GNC for SFF in 3D with a focus on Continuous Low-Thrust (CLT) propulsion satellites (e.g., with electric thrusters) and concentrates on circular low Earth orbits. However, the focus of this work is not only on control theory, but control is considered as part of the system engineering process of typical small satellite missions. Thus, common sensor and actuator systems are analyzed to derive their characteristics and their impacts on formation control. This serves as the basis for the design, implementation, and evaluation of the following control approaches: First, a Model Predictive Control (MPC) method with specific adaptations to SFF and its requirements and constraints; second, a distributed robust controller that combines consensus methods for distributed system control and $H_{\infty}$ robust control; and finally, a controller that uses plant inversion for control and combines it with a reference governor to steer the controller to the target on an optimal trajectory considering several constraints. The developed controllers are validated and compared based on extensive software simulations. Realistic 3D formation flight scenarios were taken from the Networked Pico-Satellite Distributed System Control (NetSat) cubesat formation flight mission. The three compared methods show different advantages and disadvantages in the different application scenarios. The distributed robust consensus-based controller for example lacks the ability to limit the maximum thrust, so it is not suitable for satellites with CLT. But both the MPC-based approach and the plant inversionbased controller are suitable for CLT SFF applications, while showing again distinct advantages and disadvantages in different scenarios.
The scientific contribution of this work may be summarized as the creation of novel and specific control approaches for the class of CLT SFF applications, which is still lacking methods withstanding the application in real space missions, as well as the scientific evaluation and comparison of the developed methods.
Miniaturized satellites on a nanosatellite scale below 10kg of total mass contribute most to the number of launched satellites into Low Earth Orbit today. This results from the potential to design, integrate and launch these space missions within months at very low costs. In the past decade, the reliability in the fields of system design, communication, and attitude control have matured to allow for competitive applications in Earth observation, communication services, and science missions. The capability of orbit control is an important next step in this development, enabling operators to adjust orbits according to current mission needs and small satellite formation flight, which promotes new measurements in various fields of space science. Moreover, this ability makes missions with altitudes above the ISS comply with planned regulations regarding collision avoidance maneuvering.
This dissertation presents the successful implementation of orbit control capabilities on the pico-satellite class for the first time. This pioneering achievement is demonstrated on the 1U CubeSat UWE–4. A focus is on the integration and operation of an electric propulsion system on miniaturized satellites. Besides limitations in size, mass, and power of a pico-satellite, the choice of a suitable electric propulsion system was driven by electromagnetic cleanliness and the use as a combined attitude and orbit control system. Moreover, the integration of the propulsion system leaves the valuable space at the outer faces of the CubeSat structure unoccupied for future use by payloads. The used NanoFEEP propulsion system consists of four thruster heads, two neutralizers and two Power Processing Units (PPUs).
The thrusters can be used continuously for 50 minutes per orbit after the liquefaction of the propellant by dedicated heaters. The power consumption of a PPU with one activated thruster, its heater and a neutralizer at emitter current levels of 30-60μA or thrust levels of 2.6-5.5μN, respectively, is in the range of 430-1050mW. Two thruster heads were activated within the scope of in-orbit experiments. The thrust direction was determined using a novel algorithm within 15.7° and 13.2° of the mounting direction. Despite limited controllability of the remaining thrusters, thrust vector pointing was achieved using the magnetic actuators of the Attitude and Orbit Control System.
In mid 2020, several orbit control maneuvers changed the altitude of UWE–4, a first for pico-satellites. During the orbit lowering scenario with a duration of ten days, a single thruster head was activated in 78 orbits for 5:40 minutes per orbit. This resulted in a reduction of the orbit altitude by about 98.3m and applied a Delta v of 5.4cm/s to UWE–4. The same thruster was activated in another experiment during 44 orbits within five days for an average duration of 7:00 minutes per orbit. The altitude of UWE–4 was increased by about 81.2m and a Delta v of 4.4cm/s was applied. Additionally, a collision avoidance maneuver was executed in July 2020, which increased the distance of closest approach to the object by more than 5000m.
Almost once a week broadcasts about earthquakes, hurricanes, tsunamis, or forest fires are filling the news. While oneself feels it is hard to watch such news, it is even harder for rescue troops to enter such areas. They need some skills to get a quick overview of the devastated area and find victims. Time is ticking, since the chance for survival shrinks the longer it takes till help is available. To coordinate the teams efficiently, all information needs to be collected at the command center. Therefore, teams investigate the destroyed houses and hollow spaces for victims. Doing so, they never can be sure that the building will not fully collapse while they
are inside. Here, rescue robots are welcome helpers, as they are replaceable and make work more secure. Unfortunately, rescue robots are not usable off-the-shelf, yet.
There is no doubt, that such a robot has to fulfil essential requirements to successfully accomplish a rescue mission. Apart from the mechanical requirements it has to be able to build
a 3D map of the environment. This is essential to navigate through rough terrain and fulfil manipulation tasks (e.g. open doors). To build a map and gather environmental information, robots are equipped with multiple sensors. Since laser scanners produce precise measurements and support a wide scanning range, they are common visual sensors utilized for mapping.
Unfortunately, they produce erroneous measurements when scanning transparent (e.g. glass, transparent plastic) or specular reflective objects (e.g. mirror, shiny metal). It is understood that such objects can be everywhere and a pre-manipulation to prevent their influences is impossible. Using additional sensors also bear risks.
The problem is that these objects are occasionally visible, based on the incident angle of the laser beam, the surface, and the type of object. Hence, for transparent objects, measurements might result from the object surface or objects behind it. For specular reflective objects, measurements might result from the object surface or a mirrored object. These mirrored objects are illustrated behind the surface which is wrong. To obtain a precise map, the surfaces need to
be recognised and mapped reliably. Otherwise, the robot navigates into it and crashes. Further, points behind the surface should be identified and treated based on the object type. Points behind a transparent surface should remain as they represent real objects. In contrast, Points behind a specular reflective surface should be erased. To do so, the object type needs to be classified. Unfortunately, none of the current approaches is capable to fulfil these requirements.
Therefore, the following thesis addresses this problem to detect transparent and specular reflective objects and to identify their influences. To give the reader a start up, the first chapters
describe: the theoretical background concerning propagation of light; sensor systems applied for range measurements; mapping approaches used in this work; and the state-of-the-art concerning detection and identification of transparent and specular reflective objects. Afterwards, the Reflection-Identification-Approach, which is the core of subject thesis is presented. It describes 2D and a 3D implementation to detect and classify such objects. Both are available as ROS-nodes. In the next chapter, various experiments demonstrate the applicability and reliability of these nodes. It proves that transparent and specular reflective objects can be detected and classified. Therefore, a Pre- and Post-Filter module is required in 2D. In 3D, classification is possible solely with the Pre-Filter. This is due to the higher amount of measurements. An
example shows that an updatable mapping module allows the robot navigation to rely on refined maps. Otherwise, two individual maps are build which require a fusion afterwards. Finally, the
last chapter summarizes the results and proposes suggestions for future work.
Diese Forschungsarbeit beschreibt alle Aspekte der Entwicklung eines neuartigen, autonomen Quadrokopters, genannt AQopterI8, zur Innenraumerkundung. Dank seiner einzigartigen modularen Komposition von Soft- und Hardware ist der AQopterI8 in der Lage auch unter widrigen Umweltbedingungen autonom zu agieren und unterschiedliche Anforderungen zu erfüllen. Die Arbeit behandelt sowohl theoretische Fragestellungen unter dem Schwerpunkt der einfachen Realisierbarkeit als auch Aspekte der praktischen Umsetzung, womit sie Themen aus den Gebieten Signalverarbeitung, Regelungstechnik, Elektrotechnik, Modellbau, Robotik und Informatik behandelt. Kernaspekt der Arbeit sind Lösungen zur Autonomie, Hinderniserkennung und Kollisionsvermeidung.
Das System verwendet IMUs (Inertial Measurement Unit, inertiale Messeinheit) zur Orientierungsbestimmung und Lageregelung und kann unterschiedliche Sensormodelle automatisch detektieren. Ultraschall-, Infrarot- und Luftdrucksensoren in Kombination mit der IMU werden zur Höhenbestimmung und Höhenregelung eingesetzt. Darüber hinaus werden bildgebende Sensoren (Videokamera, PMD), ein Laser-Scanner sowie Ultraschall- und Infrarotsensoren zur Hindernis-erkennung und Kollisionsvermeidung (Abstandsregelung) verwendet. Mit Hilfe optischer Sensoren kann der Quadrokopter basierend auf Prinzipien der Bildverarbeitung Objekte erkennen sowie seine Position im Raum bestimmen. Die genannten Subsysteme im Zusammenspiel erlauben es dem AQopterI8 ein Objekt in einem unbekannten Raum autonom, d.h. völlig ohne jedes externe Hilfsmittel, zu suchen und dessen Position auf einer Karte anzugeben. Das System kann Kollisionen mit Wänden vermeiden und Personen autonom ausweichen. Dabei verwendet der AQopterI8 Hardware, die deutlich günstiger und Dank der Redundanz gleichzeitig erheblich verlässlicher ist als vergleichbare Mono-Sensor-Systeme (z.B. Kamera- oder Laser-Scanner-basierte Systeme).
Neben dem Zweck als Forschungsarbeit (Dissertation) dient die vorliegende Arbeit auch als Dokumentation des Gesamtprojektes AQopterI8, dessen Ziel die Erforschung und Entwicklung neuartiger autonomer Quadrokopter zur Innenraumerkundung ist. Darüber hinaus wird das System zum Zweck der Lehre und Forschung an der Universität Würzburg, der Fachhochschule Brandenburg sowie der Fachhochschule Würzburg-Schweinfurt eingesetzt. Darunter fallen Laborübungen und 31 vom Autor dieser Arbeit betreute studentische Bachelor- und Masterarbeiten.
Das Projekt wurde ausgezeichnet vom Universitätsbund und der IHK Würzburg-Mainfranken mit dem Universitätsförderpreis der Mainfränkischen Wirtschaft und wird gefördert unter den Bezeichnungen „Lebensretter mit Propellern“ und „Rettungshelfer mit Propellern“. Außerdem wurde die Arbeit für den Gips-Schüle-Preis nominiert. Absicht dieser Projekte ist die Entwicklung einer Rettungsdrohne. In den Medien Zeitung, Fernsehen und Radio wurde über den AQopterI8 schon mehrfach berichtet.
Die Evaluierung zeigt, dass das System in der Lage ist, voll autonom in Innenräumen zu fliegen, Kollisionen mit Objekten zu vermeiden (Abstandsregelung), eine Suche durchzuführen, Objekte zu erkennen, zu lokalisieren und zu zählen. Da nur wenige Forschungsarbeiten diesen Grad an Autonomie erreichen, gleichzeitig aber keine Arbeit die gestellten Anforderungen vergleichbar erfüllt, erweitert die Arbeit den Stand der Forschung.
Corfu is a framework for satellite software, not only for the onboard part but also for the ground. Developing software with Corfu follows an iterative model-driven approach. The basis of the process is an engineering model. Engineers formally describe the basic structure of the onboard software in configuration files, which build the engineering model. In the first step, Corfu verifies the model at different levels. Not only syntactically and semantically but also on a higher level such as the scheduling.
Based on the model, Corfu generates a software scaffold, which follows an application-centric approach. Software images onboard consist of a list of applications connected through communication channels called topics. Corfu’s generic and generated code covers this fundamental communication, telecommand, and telemetry handling. All users have to do is inheriting from a generated class and implement the behavior in overridden methods. For each application, the generator creates an abstract class with pure virtual methods. Those methods are callback functions, e.g., for handling telecommands or executing code in threads.
However, from the model, one can not foresee the software implementation by users. Therefore, as an innovation compared to other frameworks, Corfu introduces feedback from the user code back to the model. In this way, we extend the engineering model with information about functions/methods, their invocations, their stack usage, and information about events and telemetry emission. Indeed, it would be possible to add further information extraction for additional use cases. We extract the information in two ways: assembly and source code analysis. The assembly analysis collects information about the stack usage of functions and methods.
On the one side, Corfu uses the gathered information to accomplished additional verification steps, e.g., checking if stack usages exceed stack sizes of threads. On the other side, we use the gathered information to improve the performance of onboard software. In a use case, we show how the compiled binary and bandwidth towards the ground is reducible by exploiting source code information at run-time.
An enduring engineering problem is the creation of unreliable software leading to unreliable systems. One reason for this is source code is written in a complicated manner making it too hard for humans to review and understand. Complicated code leads to other issues beyond dependability, such as expanded development efforts and ongoing difficulties with maintenance, ultimately costing developers and users more money.
There are many ideas regarding where blame lies in the reation of buggy and unreliable systems. One prevalent idea is the selected life cycle model is to blame. The oft-maligned “waterfall” life cycle model is a particularly popular recipient of blame. In response, many organizations changed their life cycle model in hopes of addressing these issues. Agile life cycle models have become very popular, and they promote communication between team members and end users. In theory, this communication leads to fewer misunderstandings and should lead to less complicated and more reliable code.
Changing the life cycle model can indeed address communications ssues, which can resolve many problems with understanding requirements.
However, most life cycle models do not specifically address coding practices or software architecture. Since lifecycle models do not address the structure of the code, they are often ineffective at addressing problems related to code complicacy.
This dissertation answers several research questions concerning software complicacy, beginning with an investigation of traditional metrics and static analysis to evaluate their usefulness as measurement tools. This dissertation also establishes a new concept in applied linguistics by creating a measurement of software complicacy based on linguistic economy. Linguistic economy describes the efficiencies of speech, and this thesis shows the applicability of linguistic economy to software. Embedded in each topic is a discussion
of the ramifications of overly complicated software, including the relationship of complicacy to software faults. Image recognition using machine learning is also investigated as a potential method of identifying problematic source code.
The central part of the work focuses on analyzing the source code of hundreds of different projects from different areas. A static analysis was performed on the source code of each project, and traditional software metrics were calculated. Programs were also analyzed using techniques developed by linguists to measure expression and statement complicacy and identifier complicacy. Professional software engineers were also directly surveyed to understand mainstream perspectives.
This work shows it is possible to use traditional metrics as indicators of potential project bugginess. This work also discovered it is possible to use image recognition to identify problematic pieces of source code. Finally, this work discovered it is possible to use linguistic methods to determine which statements and expressions are least desirable and more complicated for programmers.
This work’s principle conclusion is that there are multiple ways to discover traits indicating a project or a piece of source code has characteristics of being buggy. Traditional metrics and static analysis can be used to gain some understanding of software complicacy and bugginess potential. Linguistic economy demonstrates a new tool for measuring software complicacy, and machine learning can predict where bugs may lie in source code. The significant implication of this work is developers can recognize when a project is becoming buggy and take practical steps to avoid creating buggy projects.
Since the first CubeSat launch in 2003, the hardware and software complexity of the nanosatellites was continuosly increasing.
To keep up with the continuously increasing mission complexity and to retain the primary advantages of a CubeSat mission, a new approach for the overall space and ground software architecture and protocol configuration is elaborated in this work.
The aim of this thesis is to propose a uniform software and protocol architecture as a basis for software development, test, simulation and operation of multiple pico-/nanosatellites based on ultra-low power components.
In contrast to single-CubeSat missions, current and upcoming nanosatellite formation missions require faster and more straightforward development, pre-flight testing and calibration procedures as well as simultaneous operation of multiple satellites.
A dynamic and decentral Compass mission network was established in multiple active CubeSat missions, consisting of uniformly accessible nodes.
Compass middleware was elaborated to unify the communication and functional interfaces between all involved mission-related software and hardware components.
All systems can access each other via dynamic routes to perform service-based M2M communication.
With the proposed model-based communication approach, all states, abilities and functionalities of a system are accessed in a uniform way.
The Tiny scripting language was designed to allow dynamic code execution on ultra-low power components as a basis for constraint-based in-orbit scheduler and experiment execution.
The implemented Compass Operations front-end enables far-reaching monitoring and control capabilities of all ground and space systems.
Its integrated constraint-based operations task scheduler allows the recording of complex satellite operations, which are conducted automatically during the overpasses.
The outcome of this thesis became an enabling technology for UWE-3, UWE-4 and NetSat CubeSat missions.
Within this thesis a new philosophy in monitoring spacecrafts is presented: the
unification of the various kinds of monitoring techniques used during the
different lifecylce phases of a spacecraft.
The challenging requirements being set for this monitoring framework are:
- "separation of concerns" as a design principle (dividing the steps of logging
from registered sources, sending to connected sinks and displaying of
information),
- usage during all mission phases,
- usage by all actors (EGSE engineers, groundstation operators, etc.),
- configurable at runtime, especially regarding the level of detail of logging
information, and
- very low resource consumption.
First a prototype of the monitoring framework was developed as a support library
for the real-time operating system
RODOS. This prototype was tested on dedicated hardware platforms relevant for
space, and also on a satellite demonstrator used for educational purposes.
As a second step, the results and lessons learned from the development and usage
of this prototype were transfered to a real space mission: the first satellite
of the DLR compact satellite series - a space based platform for DLR's own
research activities. Within this project, the software of the avionic subsystem
was supplemented by a powerful logging component, which enhances the traditional
housekeeping capabilities and offers extensive filtering and debugging
techniques for monitoring and FDIR needs. This logging component is the major
part of the flight version of the monitoring framework. It is completed by
counterparts running on the development computers and as well as the EGSE
hardware in the integration room, making it most valuable already in the
earliest stages of traditional spacecraft development.
Future plans in terms of adding support from the groundstation as well will lead
to a seamless integration of the monitoring framework not only into to the
spacecraft itself, but into the whole space system.