62.20.-x Mechanical properties of solids
Refine
Has Fulltext
- yes (3)
Is part of the Bibliography
- yes (3)
Document Type
- Doctoral Thesis (3)
Keywords
- microstructure (2)
- Bruchfläche (1)
- Bruchmechanik (1)
- Festkörperphysik (1)
- Finite-Elemente Methode (1)
- Finite-Elemente-Methode (1)
- Fragmentation (1)
- Fragmentationsenergie (1)
- Glas (1)
- Hochgeschwindigkeitskinematographie (1)
Institute
Ziel dieser Arbeit ist es, ein verbessertes Verständnis für den Zusammenhang zwischen mechanischer Steifigkeit und Wärmetransport über das Festkörpergerüst bei hochporösen Materialien zu erlangen. Im Fokus dieser Arbeit steht die Fragestellung, wie mechanische Steifigkeit und Wärmeleitfähigkeit bei hochporösen Materialien miteinander zusammenhängen und ob es möglich ist, diese beiden Eigenschaften durch geometrische Modifikationen der Mikrostruktur unabhängig voneinander zu verändern. Die durchgeführten Untersuchungen haben gezeigt, dass ein Großteil der mikrostrukturellen Modifikationen beide Materialeigenschaften beeinflussen und die mechanische Steifigkeit in der Regel eng mit dem Wärmetransport über das Festkörpergerüst verknüpft ist. Es konnte jedoch auch nachgewiesen werden, dass die mechanische Steifigkeit bei hochporösen Materialien nicht eindeutig mit dem Wärmetransport über das Festkörpergerüst zusammenhängt und spezifische mikrostrukturelle Modifikationen einen stärkeren Einfluss auf die mechanische Steifigkeit besitzen, als auf den Wärmetransport über das Festkörpergerüst. Umgekehrt ist diese Aussage nicht ganz so eindeutig.
Die theoretische Betrachtung des Zusammenhangs zeigt, dass in die Berechnung der mechanischen Steifigkeit teils andere geometrische Strukturgrößen einfließen, als in die Berechnung des Wärmetransports über das Festkörpergerüst, so dass die mechanische Steifigkeit unabhängig von der Wärmeleitfähigkeit verändert werden kann. Es zeigt sich jedoch auch, dass die meisten strukturellen Veränderungen beide Eigenschaften beeinflussen und die mechanische Steifigkeit aufgrund der Biegedeformation der Netzwerkelemente systematisch stärker auf strukturelle Veränderungen reagiert als die Wärmeleitfähigkeit der Struktur, so dass die mechanische Steifigkeit in der Regel quadratisch mit der Wärmeleitfähigkeit des Festkörpergerüstes skaliert. Mit den Methoden der effective-media-theory lassen sich Grenzen ermitteln, innerhalb derer sich mechanische Steifigkeit und Wärmeleitfähigkeit unabhängig voneinander variieren lassen.
Im experimentellen Teil der Arbeit wurden Probenserien von Polyurethan-Schäumen, Polyurea Aerogelen und organisch / anorganischen Hybrid Aerogelen herangezogen, so dass poröse Materialien mit geordneten, voll vernetzten Mikrostrukturen, mit statistisch isotropen, teilvernetzen Mikrostrukturen, sowie Mikrostrukturen mit anisotropen Charakter in die Untersuchung einbezogen werden konnten. Als Struktureigenschaften, die die mechanische Steifigkeit ungewöhnlich stark beeinflussen, konnten die Regelmäßigkeit der Struktur und der Krümmungsradius der Netzwerkelemente sicher identifiziert werden. Alle weiteren strukturellen Veränderungen führen zu dem annähernd quadratischen Zusammenhang.
In einem dritten Abschnitt dieser Arbeit wird das vereinfachte Phononendiffusionsmodell herangezogen, um den Zusammenhang zwischen mechanischer Steifigkeit und Wärmetransport über das Festkörpergerüst bei Aerogelen grundlagenphysikalisch zu modellieren. Zur Diskussion werden die experimentell ermittelten Eigenschaften der isotropen Polyurea Aerogele herangezogen und eine qualitative Modellierung ihrer Schwingungszustandsdichten durchgeführt. Es konnte gezeigt werden, dass die Kombination aus Probendichte und Schallgeschwindigkeit, mit der sich die mechanische Steifigkeit berechnen lässt, unter bestimmten Randbedingungen auch die Energie und Transporteigenschaften der Phononen beschreibt, die den Wärmetransport über das Festkörpergerüst bei Aerogelen bestimmen.
Die Ergebnisse dieser Arbeit lassen sich zum Beispiel heranziehen, um die Eigenschaften hochporöser Materialien für eine gegebene Anwendung durch mikrostrukturelle Modifikationen optimal zu gestalten.
Understanding the mechanisms of fragmentation within silicate melts is of great interest not only for material science, but also for volcanology, particularly regarding molten fuel coolant-interactions (MFCIs). Therefore edge-on hammer impact experiments (HIEs) have been carried out in order to analyze the fracture dynamics in well defined targets by applying a Cranz-Schardin highspeed camera technique. This thesis presents the corresponding results and provides a thorough insight into the dynamics of fragmentation, particularly focussing on the processes of energy dissipation. In HIEs two main classes of cracks can be identified, characterized by completely different fracture mechanisms: Shock wave induced “damage cracks” and “normal cracks”, which are exclusively caused by shear-stresses. This dual fracture situation is taken into account by introducing a new concept, according to which the crack class-specific fracture energies are linearly correlated with the corresponding fracture areas. The respective proportionality constants - denoted “fracture surface energy densities” (FSEDs) - have been quantified for all studied targets under various constraints. By analyzing the corresponding high speed image sequences and introducing useful dynamic parameters it has been possible to specify and describe in detail the evolution of fractures and, moreover, to quantify the energy dissipation rates during the fragmentation. Additionally, comprehensive multivariate statistical analyses have been carried out which have revealed general dependencies of all relevant fracture parameters as well as characteristics of the resulting particles. As a result, an important principle of fracture dynamics has been found, referred to as the “local anisotropy effect”: According to this principle, the fracture dynamics in a material is significantly affected by the location of directed stresses. High local stress gradients cause a more stable crack propagation and consequently a reduction of the energy dissipation rates. As a final step, this thesis focusses on the volcanological conclusions which can be drawn on the basis of the presented HIE results. Therefore fragments stemming from HIEs have been compared with natural and experimental volcanic ash particles of basaltic Grimsvötn and rhyolitic Tepexitl melts. The results of these comparative particle analyses substantiate HIEs to be a very suitable method for reproducing the MFCI loading conditions in silicate melts and prove the FSED concept to be a model which is well transferable to volcanic fragmentation processes.
In the present study numerical methods are employed within the framework of multiscale modeling. Quantum mechanics and finite element method simulations have been used in order to calculate thermoelastic properties of ceramics. At the atomic scale, elastic constants of ten different ceramics (Al2O3, alpha- and beta-SiC, TiO2-rutile and anatase, AlN, BN, CaF2, TiB2, ZrO2) were calculated from the first principles (ab-initio) using the density functional theory with the general gradient approximation. The simulated elastic moduli were compared with measured values. These results have shown that the ab-initio computations can be used independently from experiment to predict elastic behavior and can provide a basis for the modeling of structural and elastic properties of more complex composite ceramics. In order to simulate macroscopic material properties of composite ceramics from the material properties of the constituting phases, 3D finite element models were used. The influence of microstructural features such as pores and grain boundaries on the effective thermoelastic properties is studied through a diversity of geometries like truncated spheres in cubic and random arrangement, modified Voronoi polyhedra, etc. A 3D model is used for modeling the microstructure of the ceramic samples. The measured parameters, like volume fractions of the two phases, grain size ratios and grain boundary areas are calculated for each structure. The theoretical model is then varied to fit the geometrical data derived from experimental samples. The model considerations are illustrated on two types of bi-continuous materials, a porous ceramic, alumina (Al2O3) and a dense ceramic, zirconia-alumina composite (ZA). For the present study, alumina samples partially sintered at temperatures between 800 and 1320 C, with fractional densities between 58.4% and 97% have been used. For ZA ceramic the zirconia powder was partially stabilized and the ratio between alumina and zirconia was varied. For these two examples of ceramics, Young’s modulus and thermal conductivity were calculated and compared to experimental data of samples of the respective microstructure. Comparing the experimental and simulated values of Young’s modulus for Al2O3 ceramic a good agreement was obtained. For the thermal conductivity the consideration of thermal boundary resistance (TBR) was necessary. It was shown that for different values of TBR the experimental data lie within the simulated thermal conductivities. In the case of ZA ceramic also a good agreement between simulated and experimental values was observed. For smaller ZrO2 fractions, a larger Young’s modulus and thermal conductivity was observed in the experimental samples. The discrepancies have been discussed by taking into account the effect of pressure. Considering the dependence of the thermoelastic properties on the pressure, it has been shown that the thermal stresses resulting from the cooling process were insufficient to explain the discrepancies between experimental and simulated thermoelastic properties.