541 Physikalische Chemie
Refine
Has Fulltext
- yes (9)
Is part of the Bibliography
- yes (9)
Year of publication
- 2018 (9) (remove)
Document Type
- Doctoral Thesis (6)
- Preprint (3)
Keywords
Institute
Sonstige beteiligte Institutionen
Excitons in the molecular aggregates of chromophores are key participants in important processes such as photosynthesis or the functioning of organic photovoltaic devices. Therefore, the exploration of exciton dynamics is crucial. Here we report on exciton localization during excited-state dynamics of the recently synthesized tetracene trimer [Liu et al., Org. Lett., 2017, 19, 580]. We employ the surface hopping approach to nonadiabatic molecular dynamics in conjunction with the long-range corrected time-dependent density functional tight binding (LC-TDDFTB) method [Humeniuk and Mitrić, Comput. Phys. Commun., 2017, 221, 174]. Utilizing a set of descriptors based on the transition density matrix, we perform comprehensive analysis of exciton dynamics. The obtained results reveal an ultrafast exciton localization to a single tetracene unit of the trimer during excited-state dynamics, along with exciton transfer between units.
We demonstrate two-quantum (2Q) coherent two-dimensional (2D)electronic spectroscopy using a shot-to-shot-modulated pulse shaper and fluorescence detection. Broadband collinear excitation is realized with the supercontinuum output of an argon-filled hollow-core fiber, enabling us to excite multiple transitions simultaneously in the visible range. The 2Q contribution is extracted via a three-pulse sequence with 16-fold phase cycling and simulated employing cresyl violet as a model system. Furthermore, we report the first experimental realization of one-quantum−two-quantum (1Q-2Q) 2D spectroscopy, offering less congested spectra as compared with the 2Q implementation. We avoid scattering artifacts and nonresonant solvent contributions by using fluorescence as the observable. This allows us to extract quantitative information about doubly excited states that agree with literature expectations. The high sensitivity and background-free nature of fluorescence detection allow for a general applicability of this method to many other systems.
Die vorliegende Dissertation widmete sich der Aufklärung der Photodissoziationsdynamik der drei Xylyl-Radikale ortho-, meta- und para-Xylyl sowie des Benzyl-Radikals mit Hilfe des Velocity-Map-Imagings. Diese reaktiven Intermediate sind insbesondere im Bereich der Verbrennungschemie von hoher Relevanz, da sie die primären Zerfallsprodukte der Xylole und des Toluols darstellen, welche als Antiklopfmittel in Ottokraftstoffen Verwendung finden.Dementsprechend ist eine Betrachtung des weiteren Zerfalls dieser resonanz-stabilisierten Radikale, insbesondere unter dem Gesichtspunkt der Rußbildung, von entscheidender Bedeutung.
Für alle drei Xylyl-Radikale konnte eine selektive pyrolytische Generierung aus den entsprechenden 2-(Methylphenyl)ethylnitriten realisiert werden. Die isomerspezifische Identifikation erfolgte mit Hilfe von REMPI-Spektroskopie der jeweiligen D0 -> D3-Übergänge. Nachfolgend wurde die Photodissoziation aller drei Xylyl-Isomere nach Anregung des D3-Zustandes bei ca. 310 nm und nach Anregung der D-Bande bei 250 nm untersucht. Das „einfachste” Experiment stellte in diesem Zusammenhang die Photodissoziation des para-Xylyl-Radikals dar. Es konnte die von Hemberger et al. in thermischen Zerfallsexperimenten beobachtete Reaktion p-Xylyl -> p-Xylylen + H verifiziert werden. Die VMI-Experimente lieferten die Kennwerte <fT>(309.6nm) = 33 % und <fT>(250nm) = 19 % unter Erhalt isotroper Images für beide Anregungswellenlängen. Die dazugehörigen Dissoziationsratenkonstanten wurden zu kH(309.6nm) ≈ 10^8 s-1 und kH(250nm) ≈ 5*10^7 s-1 bestimmt. Es ist verblüffend, dass die Photodissoziation scheinbar bei der höheren Anregungswellenlänge von 309.6 nm (und somit bei geringerer Anregungsenergie) schneller verläuft als bei 250 nm. Darüber hinaus ist es nicht möglich, die beobachteten Raten mittels des statistischen Modells der RRKM-Theorie zu beschreiben. Des Weiteren konnten auch die Translationsenergieverteilungen nicht mit dem „Quack-Fit” für statistische Dissoziationen angefittet werden. Bei der Photodissoziation des para-Xylyl-Radikals liegt eine Dissoziation nach Rückkehr in den rovibronisch hochangeregten elektronischen Grundzustand infolge der Photoanregung vor. Hierbei thermalisiert die innere Energie im elektronischen Grundzustand vor der Dissoziation scheinbar nur teilweise, sodass keine vollständige statistische Verteilung dieser innerhalb des para-Xylyls gegeben ist. Da dies eine Grundvoraussetzung der gängigen statistischen Modelle darstellt, ist es nicht verwunderlich, dass keine quantitative Reproduktion der experimentellen Ergebnisse durch Anwendung dieser Modelle ermöglicht wird.
Bei entsprechenden Experimenten zum ortho-Isomer konnten diese statistischen Modelle ebenfalls nicht zur quantitativen Beschreibung der Dissoziation verwendet werden. Abermals wurde mit kH(311.1nm) ≈ 10^8 s-1 und kH(250nm) ≈ 5*10^7 s-1 eine schnellere Dissoziation bei geringerer Anregungsenergie festgestellt. Dies erscheint demnach charakteristisch für die Xylyl-Radikale. Innerhalb der VMI-Experimente wurden isotrope Verteilungen erhalten, deren Fragmenttranslationsenergieverteilung nach Anregung des D3-Niveaus bei 311.1 nm jedoch nicht durch die von Hemberger et al. beschriebene Hauptreaktion o-Xylyl -> o-Xylylen + H erklärt werden konnte. Eine Fragmentation nach o-Xylyl -> Benzocyclobuten + H konnte auf diesem Weg als Hauptdissoziationspfad identifiziert werden. Innerhalb der Studien von Hemberger et al. ist eine Reaktion zu Benzocyclobuten bei Anregung mit 311.1 nm energetisch nicht zugänglich. Mittels quantenchemischer Rechnung konnte jedoch ein bislang unbekannter, energetisch zugänglicher Reaktionspfad zur Bildung von Benzocyclobuten unter simultaner Ringschlussreaktion und Wasserstofffragmentation identifiziert und charakterisiert werden. Die Kennwerte der Photodissoziationsreaktion des ortho-Xylyls konnten hierdurch zu <fT>(311.1nm) = 30 % und <fT>(250nm) = 16 % bestimmt werden. Wie bereits im Fall des para-Isomers liegt die Vermutung nahe, dass es sich um eine Dissoziation aus dem rovibronisch hoch-angeregten elektronischen Grundzustand handelt, welcher nicht vollständig vor der Fragmentation thermalisiert.
Im Rahmen der Experimente zum letzten der drei Xylyl-Isomere, dem meta-Xylyl-Radikal, konnte mit VMI eine Fragmentation nach m-Xylyl -> m-Xylylen + H als Hauptdissoziationpfad ausgeschlossen werden. Innerhalb der Experimente nach Anregung des D3-Niveaus um 310 nm konnten mit para-Xylylen und Benzocyclobuten zwei Reaktionsprodukte festgestellt werden, welche die erhaltene Translationsenergieverteilung erklären könnten, wobei die entsprechende maximale Überschussenergie einer Fragmentation zu para-Xylylen den Nullabfall der Verteilung geringfügig besser widerspiegelt. Die mittlere Fragmenttranslationsenergie liegt mit <fT>(p-Xylylen) = 29 % respektive <fT>(Bcb) = 25 % leicht unterhalb der entsprechenden Kennwerte der para- beziehungsweise ortho-Xylyl Experimente. Durch die nötige, der Dissoziation vorausgehende Isomerisierung scheint ein höherer Thermalisierungsgrad der Schwingungs- und Rotationsenergie innerhalb des elektronischen Grundzustands erreicht zu werden, aus welchem die geringen <fT>-Werte resultieren könnten. Der Effekt verminderter <fT>-Werte wurde in den Experimenten bei 250 nm nicht gefunden (<fT>(p-Xylylen) = 19 % respektive <fT>(Bcb) = 17 %). Vergleicht man an dieser Stelle die <ET>- anstelle der <fT>-Werte (<ET>(para) = 0.41 eV, <ET>(ortho) = 0.38 eV, <ET>(meta) = 0.41 eV), stellt man fest, dass <ET>(meta) = <ET>(para) gilt und somit ein weiteres Indiz dafür gefunden wurde, dass eine Umlagerung zu para-Xylyl mit anschließender Fragmentation zu para-Xylylen möglicherweise gegenüber jener zum ortho-Isomer mit nachfolgender Bcb-Bildung bevorzugt ist. Dies würde darüber hinaus im Einklang mit den Studien von Hemberger et al. stehen, in welchen beim thermischen Zerfall des meta-Xylyls para-Xylylen als alleiniges Fragmentationsprodukt gefunden wurde. Eine Betrachtung der Umlagerung mittels RRKM wies jedoch keinen bevorzugten Isomerisierungspfad aus. Schlussendlich lässt sich aufgrund der ermittelten Ratenkonstanten (kH(310nm) ≈ 10^8 s-1, kH(250nm) ≈ 4*10^7 s-1) sowie den <fT>-Werten vermuten, dass die Isomerisierung langsamer als die Dissoziation bei 310 nm verläuft, jedoch zumindest auf einer ähnlichen Zeitskala wie die entsprechende Dissoziation nach Anregung bei 250 nm. Eine zweifelsfreie Interpretation der meta-Xylyl Experimente gestaltet sich jedoch als schwierig.
Innerhalb der Studien zur Photodissoziation des Benzyl-Radikals konnten literaturbekannte Daten zur Fragmentation nach Anregung um 250 nm in guter Übereinstimmung reproduziert werden. Die experimentellen Daten zur Untersuchung der Photodissoziation nach Anregung des D3-Niveaus konnten jedoch nicht eindeutig interpretiert werden. Die literaturbekannte Lage des D3-Niveaus bei 305.3 nm konnte mittels REMPI-Spektroskopie reproduziert werden und anschließende 1H-Photofragmentspektren zeigten, dass eine Anregung des D3-Niveaus zur Bildung von Wasserstofffragmenten führt. Die beobachteten 1H-Fragmente zeigten jedoch eine deutlich zu hohe Überschussenergie für eine Einphotonenabsorption, sodass diese Mehrphotonenabsorptionen zugeordnet werden müssen. Es lässt sich vermuten, dass die Wasserstofffragmente aus einer Anregung eines „superexcited states” oberhalb des Ionisationspotentials, wahrscheinlich durch Zweiphotonenabsorption, stammen. Dieser „superexcited state” zeigt scheinbar keine (vollständige) Autoionisation und führt nachfolgend zumindest teilweise zur Fragmentation des Benzyl-Radikals. In der Folge liegt die Vermutung nahe, dass die Energien eines einzelnen 305 nm-Photons nicht zur Initiierung einer Photodissoziation des Benzyl-Radikals ausreichend ist oder aber, dass diese Photodissoziation zu langsam ist, um sie in einem VMI-Experiment zu beobachten. Potential für weitere Experimente zur Photodissoziation des Benzyl-Radikals nach Anregung des D3-Niveaus wird an dieser Stelle nicht gesehen.
Die Terahertz-Technologie erschließt permanent neue Forschungsbereiche und wird auch vermehrt im kommerziellen Bereich eingesetzt. Diese Entwicklung wird in eigenen Analysen dargestellt. Als Kernaspekte dieses Buchs werden technologische Verbesserungen für gepulste Terahertz-Systeme und der spektroskopische Einsatz für die Polymeranalytik vorgestellt. Einen besonderen Stellenwert nehmen dabei Untersuchungen an Polymermischungen im Schmelzezustand während der Prozessierung ein. Bemerkenswert ist hierbei das temperaturabhängige Verhalten von verschiedensten Polyamiden. Die Änderung der optischen und spektroskopischen Eigenschaften und die Einflussfaktoren werden tiefergehend betrachtet. Dabei werden verschiedene klassische und neuere Experimentalmethoden, Modellierungen und quantenchemische Simulationsmethoden eingesetzt, um insbesondere die intermolekularen Wechselwirkungen aufzuklären.
In this work the energy transfer and excitonic coupling in different chromophore arrangements were investigated. A difference in the coupling strength was introduced by varring the connecting unit and the spacial orientation relative to each other.
The synthesis of the 2,7-substituted pyrene compounds could be optimised and good yields of HAB 1 and HAB 2 and small amounts of HAB 2 could be achieved by cobalt-catalysed trimerisation or Diels Alder reaction in the end. Absorption and fluorescence spectra reveal strong intramolecular interactions between the pyrene molecules in the HAB 1. Excitation spectra recorded at the high and low energy fluorescence suggest the contribution of two components to the spectra. One being similar to the ground state aggregate and a second species similar to undisturbed pyrene. All these feature can be accounted to two different fluorescent states which are due to electronical decoupling in the excited state. Due to the strong intramolecular coupling already in the ground state of the molecule, no energy transfer could be studied, as the six pyrene units cannot be seen as separate spectroscopic entities between which energy could be transferred.
In the second part of this thesis dye conjugates of different size and alignment were synthesised to study the interaction of the transition-dipole moments. Therefore a systematic investigation of Sonogashira conditions was performed in order to obtain good yields of the desired compounds and keep dehalogenation at a minimum level. Nevertheless only the symmetrical triads could be purified as the asymmeric triads and pentades proved to decompose during purification.
The pyrene containing triads Py2B and Py2SQB show small interactions already in the ground state represented by red shifts of the spectra and a broadening of the bands. Nevertheless, these interactions are in the weak coupling regime and energy transfer between the constituents is possible. On the contrary in the TA spectra it is obvious that always the whole triad, at least to some extend is excited. To question if the excitation of the high energy state is deactivated by energy transfer or rather IC in a superchromophore could not be distinguished in the course of this work. At present additional time-dependent calculations of the dynamics are in progress to get a deeper understanding of the photophysical processes taking place in the triads.
The dye conjugates B2SQB-3 and (SQB)2B-4 can be assigned to the strong interaction range and hence are describable by exciton theory. The transition-dipole moments proved to be more than additive and increase for both compounds from absorption to fluorescence. This can be explained by an enhancement of the coupling in the relaxed excited state compared to the absorption into the Franck-Condon state due to a more steep potential energy surface in the excited state and hence smaller fluctuations.
In the last part of this thesis the influence of disrupting electronical communication by implementing a rigid non-conjugated bridge in a bichromophoric trans-squaraine system was tested. While the flexible linked squaraines show complex spectra due to different conformers the SQA2Anth compound is rigified and no rotation is possible. This change in flexibility is represented in the steady-state spectra where just one main absorption and fluorescence band is present due to a single allowed excitonic state. The system proves to own an excited state that is completely delocalised over the whole molecule.
In the context of quantum mechanical calculations, the properties of non-adiabatic coupling in a small system, the Shin-Metiu model, is investigated.
The transition from adiabatic to non-adiabatic dynamics is elucidated in modifying the electron-nuclear interaction. This allows the comparison of weakly correlated electron-nuclear motion with the case where the strong correlations determine the dynamics.
The studies of the model are extended to include spectroscopical transitions being present in two-dimensional and degenerate four-wave mixing spectroscopy.
Furthermore, the quantum and classical time-evolution of the coupled motion in the complete electron-nuclear phase space is compared for the two coupling cases.
Additionally, the numerically exact electron flux within the weak coupling case is compared to the Born-Oppenheimer treatment.
In the last part of the thesis, the model is extended to two dimensions.
The system then possesses potential energy surfaces which exhibit a typical 'Mexican hat'-like structure and a conical intersection in the adiabatic representation.
Thus, it is possible to map properties of the system onto a vibronic coupling (Jahn-Teller) hamiltonian. Exact wave-packet propagations as well as nuclear wave-packet dynamics in the adiabatic and diabatic representation are performed.
The invention of laser pulse shapers allowed for various quantum control experiments, where a chemical reaction is guided by specifically tailored laser pulses. However, despite of the prominent role of the liquid phase in chemistry, no successful attempt for controlling the selectivity of a bond-fission reaction has yet been reported in this state of matter. Promising candidates for such an experiment are C$_{\infty\mathrm{v}}$-symmetric trihalide anions with two different chemical bonds like $\ce{I2Cl-}$, because these molecules notionally offer the most simplest selectivity-control scenario of breaking either the one or the other bond and they are expected to dissociate under ultraviolet (UV) irradiation like it is known for the most-studied trihalide $\ce{I3-}$.
In order to investigate in this thesis the possibility that the dissociation reaction of such trihalides branches into two different photofragments, the ultrafast photodissociation dynamics of $\ce{I3-}$, $\ce{Br3-}$, $\ce{IBr2-}$ and $\ce{ICl2-}$ (point group D$_{\infty\mathrm{h}}$) as well as of $\ce{I2Br-}$ and $\ce{I2Cl-}$ (point group C$_{\infty\mathrm{v}}$) in dichloromethane solution were measured with broadband transient absorption spectroscopy in magic-angle configuration. The identification of the reaction pathway(s) relies on vibrational wavepacket oscillations, which survive the dissociation process and therefore carry not only informations about the reactant trihalides but also about the fragment dihalides.
These characteristic vibrational wavenumbers were extracted from the measured transient absorption spectra by globally fitting the population dynamics together with the wavepacket dynamics. Until recently, such a combined model function was not available in the well-established fitting tool Glotaran. This made it inevitable to develop a custom implementation of the underlying variable-projection fitting algorithm, for which the computer-algebra software Mathematica was chosen. Mathematica's sophisticated built-in functions allow not only for a high flexibility in constructing arbitrary model functions, but also offer the possibility to automatically calculate the derivative(s) of a model function. This allows the fitting procedure to use the exact Jacobian matrix instead of approximating it with the finite difference method.
Against the expectation, only one of the two thinkable photodissociation channels was found for each of the investigated C$_{\infty\mathrm{v}}$ trihalides. Since the photofragments recombine, their absorption signal as well as the reactant ground state bleach recover. This happens in a biexponential manner, which in the case of $\ce{I3-}$ was interpreted by Ruhman and coworkers with the direct formation of a neutral dihalogen fragment $\ce{I2}$ beside the negatively charged dihalide fragment $\ce{I2-}$. In this thesis, such a direct reaction channel was not found and instead the fast component of the biexponential decay is explained with vibrational excess energy mediating the recombination-preceding electron transfer process $\ce{I2- + I -> I2 + I-}$, while the slow component is attributed to cooled-down fragments.
In addition to the trihalide experiments, the possibility of a magic-angle configuration for polarization-shaping control experiments was theoretically investigated in this thesis by deriving magic-angle conditions for the third-order electric-dipole response signal of arbitrarily polarized laser pulses. Furthermore, the subtleties of anisotropy signals violating the well-known range of \numrange{-0.2}{0.4} were studied.
We have investigated the photodynamics of \(\beta\)-D-glucose employing our field-induced surface hopping method (FISH), which allows us to simulate the coupled electron-nuclear dynamics, including explicitly nonadiabatic effects and light-induced excitation. Our results reveal that from the initially populated S\(_{1}\) and S\(_{2}\) states, glucose returns nonradiatively to the ground state within about 200 fs. This takes place mainly via conical intersections (CIs) whose geometries
in most cases involve the elongation of a single O-H bond, while in some instances ring-opening due to dissociation of a C-O bond is observed. Experimentally, excitation to a distinct excited electronic state is improbable due to the presence of a dense manifold of states bearing similar oscillator strengths. Our FISH simulations explicitly including a UV laser pulse of 6.43 eV photon energy reveals that after initial excitation the population is almost equally spread over several close-lying electronic states. This is followed by a fast nonradiative decay on the time scale of 100-200 fs, with the final return to the ground state proceeding via the S\(_{1}\) state through the same types of CIs as observed in the field-free simulations.
Coherent Multidimensional Spectroscopy in Molecular Beams and Liquids Using Incoherent Observables
(2018)
The aim of the present work was to implement an experimental approach that enables coherent two-dimensional (2D) electronic spectroscopy of samples in various states of matter. For samples in the liquid phase, a setup was realized that utilizes the sample fluorescence for the acquisition of 2D spectra. Whereas the liquid-phase approach has been established before, coherent 2D spectroscopy on gaseous samples in a molecular beam as developed in this work is in fact a new method. It employs for the first time cations in a time-of-flight mass spectrometer for signal detection and was used to obtain the first ion-selective 2D spectra of a molecular-beam sample. Additionally, a new acquisition concept was developed in this thesis that significantly decreases measurement times in 2D spectroscopy using optimized sparse sampling and a compressed-sensing reconstruction algorithm.
Characteristic for the variant of 2D spectroscopy presented in this work is the usage of a phase-coherent sequence of four laser pulses in a fully collinear geometry for sample excitation. The pulse sequence was generated by a custom-designed pulse shaper that is capable of rapid scanning by changing the pulse parameters such as time delays and phases with the repetition rate of the laser. The sample's response was detected by monitoring incoherent observables that arise from the final-state population, for instance fluorescence or cations. Phase cycling, i.e., signal acquisition with different combinations of the relative phases of the excitation pulses, was applied to extract nonlinear signal contributions from the full signal during data analysis.
Liquid-phase 2D fluorescence spectroscopy was established with the laser dye cresyl violet as a sample molecule, confirming coherent oscillations previously observed in literature that are originating from vibronic coherences in specific regions of the 2D spectrum.
The data set of this experiment was used subsequently to introduce optimized sparse sampling in 2D spectroscopy. An optimization algorithm was implemented in order to find the best sampling pattern while taking only one quarter of the regular time-domain sampling points, thereby reducing the acquisition time by a factor of four. Signal recovery was based on a new and compact representation of 2D spectra using the von Neumann basis, which required about six times less coefficients than the Fourier basis to retain the relevant information. Successful reconstruction was shown by recovering the coherent oscillations in cresyl violet from a reduced data set.
Finally, molecular-beam coherent 2D spectroscopy was introduced with an investigation of ionization pathways in highly-excited nitrogen dioxide, revealing transitions to discrete auto-ionizing states as the dominant contribution to the ion signal. Furthermore, the advantage of the time-of-flight approach to obtain reactant and product 2D spectra simultaneously enabled the observation of distinct differences in the multiphoton-ionization response functions of the nitrogen dioxide cation and the nitrogen oxide ionic fragment.
The developed experimental techniques of this work will facilitate fast acquisition of 2D spectra for samples in various states of matter and permit reliable direct comparison of results. Therefore, they pave the way to study the properties of quantum coherences during photophysical processes or photochemical reactions in different environments.