Refine
Has Fulltext
- yes (135)
Is part of the Bibliography
- yes (135) (remove)
Year of publication
Document Type
- Journal article (122)
- Doctoral Thesis (13)
Keywords
- Organische Chemie (135) (remove)
Institute
The present thesis introduce different synthetic strategies towards a variety of polycyclic aromatic dicarboximides (PADIs) with highly interesting and diverse properties. This included tetrachlorinated, tetraaryloxy- and tetraaryl-substituted dicarboximides, fused acceptor‒donor(‒acceptor) structures as well as sterically shielded rylene and nanographene dicarboximides. The properties and thus the disclosure of structure‒property relationships of the resulting dyes were investigated in detail among others with UV‒vis absorption spectroscopy, fluorescence spectroscopy, cyclic voltammetry and single crystal X-ray analysis. For instance, some of the fused and substituted PADIs offer strong absorption of visible and near infrared (NIR) light, NIR emission and low-lying LUMO levels. On the contrary, intriguing optical features in the solid-state characterize the rylene dicarboximides with their bulky N-substituents, while the devised sterically enwrapped nanographene host offered remarkable complexation capabilities in solution.
The present thesis adress the synthesis and characterization of novel COFs that contain dye molecules as integral components of the organic backbone. These chromophore-containing frameworks open new research lines in the field and call for the exploration of applications such as catalysis, sensing, or in optoelectronic devices. Initially, the fabrication of organic-inorganic composites by the growth of DPP TAPP COF around functionalized iron oxide nanoparticles is reported. By varying the ratio between inorganic nanoparticles and organic COFs, optoelectronic properties of the materials are adjusted. The document also reports the synthesis of a novel boron dipyrromethene-containing (BODIPY) COF. Synthesis, full characterization and the scope of potential applications with a focus on environmental remediation are discussed in detail. Last, a novel diketopyrrolopyrrole-containing (DPP) DPP-Py-COF based on the combination of DDP and pyrene building blocks is presented. The very low bandgap of these materials and initial investigations on the photosensitizing properties are discussed.
Synthese einer Bibliothek von Aminosäure-basierten Oligopeptid-Amphiphilen mittels Festphasensynthese, deren kovalente Knüpfung an einen nukleophilen Kern zu C3-symmetrischen Sternmesogenen und die Analyse der Einflüsse der verwendeten Aminosäuren auf die Sekundärstruktur des synthetisierten Moleküls.
The present thesis demonstrates how different thermodynamic aspects of self-assembly and stimuli-responsive properties in water can be encoded on the structure of π-amphiphiles, consisting of perylene or naphthalene bisimide cores. Initially, quantitative thermodynamic insights into the entropically-driven self-assembly was studied for a series of naphthalene bisimides with UV/Vis and ITC measurements, which demonstrated that their thermodynamic profile of aggregation is heavily influenced by the OEG side chains. Subsequently, a control over the bifurcated thermal response of entropically driven and commonly observed enthalpically driven self-assembly was achieved by the modulation of glycol chain orientation. Finally, Lower Critical Solution Temperature (LCST) phenomenon observed for these dyes was investigated as a precise control of this behavior is quintessential for self-assembly studies as well as to generate ‘smart’ materials. It could be shown that the onset of phase separation for these molecules can be encoded in their imide substituents, and they are primarily determined by the supramolecular packing, rather than the hydrophobicity of individual monomers.
The aim of the first part of this thesis was to investigate (R,R)-PBI as a model system for polymorphism at its origin by a supramolecular approach. The pathway complexity of (R,R)-PBI was fine-tuned by experimental parameters such as solvent, temperature and concentration to make several supramolecular polymorphs accessible. Mechanistic and quantum chemical studies on the kinetics and thermodynamics of the supramolecular polymerization of (R,R)-PBI were conducted to shed light on the initial stages of polymorphism. The second part of this work deals with mechanistic investigations on the supramolecular polymerization of the racemic mixture of (R,R)- and (S,S)-PBI with regard to homochiral and heterochiral aggregation leading to conglomerates and a racemic supramolecular polymer, respectively.
Inspired by the fact that sufficient solubility in aqueous media can be achieved by functional substitution of perylene bisimides (PBIs) with polar groups, one of the essential aims of this thesis was the design and successful synthesis of the new water-soluble PBI cyclophanes [2PBI]-1m and [2PBI]-1p, which are appended with branched, hydrophilic oligoethylene glycol (OEG) chains. Subsequently, the focus was set on the elucidation of properties of PBI cyclophane hosts which are also of relevance for recognition processes in biological systems. The performance of the new amphiphilic PBI cyclophane [2PBI]-1p as synthetic receptors for various natural aromatic alkaloids in aqueous media was thoroughly investigated. Alkaloids represent a prominent class of ubiquitous nitrogen containing natural compounds with a great structural variety and diverse biological activity. As of yet, no chromophore host acting as a molecular probe for a range of alkaloids such as harmine or harmaline is known. In addition, the self-association behavior of cyclophane host [2PBI]-1m and its reference monomer in water was studied in order to gain insights into the thermodynamic driving forces affecting the self-assembly process of these two PBI systems in aqueous environment. Moreover, the chirality transfer upon guest binding previously observed for a PBI cyclophane was investigated further. The assignment of the underlying mechanism of guest recognition to either the induced fit or conformational selection model was of particular interest.
Supramolecular Block Copolymers by Seeded Living Supramolecular Polymerization of Perylene Bisimides
(2019)
The research on supramolecular polymerization has undergone a rapid development in the last two decades, particularly since supramolecular polymers exhibit a broad variety of functionalities and applications in organic electronics, biological science or as functional materials (Chapter 2.1). Although former studies have focused on investigation of the thermodynamics of supramolecular polymerization (Chapter 2.2), the academic interest in the recent years shifted towards gaining insight into kinetically controlled self-assembly and pathway complexity to generate novel out-of-equilibrium architectures with interesting nanostructures and features (Chapter 2.3). Along this path, the concepts of seeded and living supramolecular polymerization were recently developed to enable the formation of supramolecular polymers with controlled length and low polydispersity under precise kinetic control (Chapter 2.4). Besides that, novel strategies were developed to achieve supramolecular copolymerization resulting in complex multicomponent nanostructures with different structural motives. The classification of these supramolecular copolymers on the basis of literature examples and an overview of previously reported principles to create such supramolecular architectures are provided in Chapter 2.5.
The aim of the thesis was the non-covalent synthesis of highly desirable supramolecular block copolymers by the approach of living seeded supramolecular polymerization and to study the impact of the molecular shape of the monomeric building blocks on the supramolecular copolymerization. Based on the structure of the previously investigated PBI organogelator H-PBI a series of novel PBIs, bearing identical hydrogen-bonding amide side-groups in imide-position and various kind or number of substituents in bay-position, was synthesized and analyzed within this thesis. The new PBIs were successfully obtained in three steps starting from the respective bromo-substituted perylene-3,4:9,10-tetracarboxylic acid tetrabutylesters or from the N,N’-dicyclohexyl-1,7-dibromoperylene-3,4:9,10-tetracarboxylic acid bisimide. All target compounds were obtained in the final step by imidization reactions of the respective perylene tetracarboxylic acid bisanhydride precursors with N-(2-aminoethyl)-3,4,5-tris(dodecyloxy)-benzamide and were fully characterized by 1H and 13C NMR spectroscopy as well as high resolution mass spectrometry.
The variation of bay-substituents strongly changes the optical properties of the monomeric PBIs which were investigated by UV/vis and fluorescence spectroscopy. The increase of the number of the methoxy-substituents provokes, for example, a red-shift of the absorption maxima concomitant with a decrease of extinction coefficients and leads to a drastic increase of the fluorescence quantum yields. Furthermore, the molecular geometry of the PBIs is also affected by variations of the bay-substituents. Thus, increasing the steric demand of the bay-substituents leads to an enlargement of the twist angles of the PBI cores as revealed by DFT calculations.
Especially the 1,7-dimethoxy bay-substituted MeO-PBI proved to be very well-suited for the studies envisioned within this thesis. The self-assembly of this PBI derivative was analyzed in detail by UV/vis, fluorescence and FT-IR spectroscopy as well as atomic force microscopy (Chapter 3). These studies revealed that MeO-PBI forms in a solvent mixture of methylcyclohexane and toluene (2:1, v/v) kinetically trapped off-pathway H-aggregated nanoparticles upon fast cooling of a monomeric solution from 90 to 20 °C. However, upon slow cooling of the monomer solution fluorescent J-type nanofibers are formed by π π interactions and intermolecular hydrogen-bonding.
The kinetically metastable off-pathway H-aggregates can be transformed into the thermodynamically more favored J-type aggregates by addition of seeds, which are produced by ultrasonication of the polymeric nanofibers. Interestingly, the living character of this seed-induced supramolecular polymerization process was proven by a newly designed multicycle polymerization experimental protocol. This living polymerization experiment clearly proves, that the polymerization can only occur at the “active” ends of the polymeric seed and that almost no recombination or chain termination processes are present. Hence, the approach of living supramolecular polymerization enables the formation of supramolecular polymers with controlled length and narrow polydispersity.
In Chapter 4 the copolymerization of MeO-PBI with the structurally similar 1,7-dichloro (Cl-PBI) and 1,7-dimethylthio (MeS-PBI) bay-substituted PBIs is studied in detail. Both PBIs form analogous to MeO-PBI kinetically trapped off-pathway aggregates, which can be converted into the thermodynamically stable supramolecular polymers by seed-induced living supramolecular polymerization under precise kinetic control. However, the stability of the kinetically trapped aggregates of Cl-PBI and MeS-PBI is distinctly reduced compared to that of MeO-PBI, because the π-π-interactions of the kinetically metastable aggregates are hampered through the increased twisting of the PBI-cores of the former PBIs. UV/vis studies revealed that the two-component seeded copolymerization of the kinetically trapped state of MeO-PBI with seeds of Cl-PBI leads to the formation of unprecedented supramolecular block copolymers with A-B-A pattern by a living supramolecular polymerization process at the termini of the seeds. Remarkably, the resulting A-B-A block pattern of the obtained copolymers was clearly confirmed by atomic force microscopy studies as the respective blocks formed by the individual monomeric units could be distinguished by the pitches of the helical nanofibers.
Moreover, detailed UV/vis and AFM studies have shown that by inverted two-component seed-induced polymerization, e.g., upon addition of seeds of MeO-PBI to the kinetically trapped aggregates of Cl-PBI, triblock supramolecular copolymers with B-A-B pattern can be generated. The switching of the block pattern could only be achieved because of the perfectly matching conditions for the copolymerization process and the tailored molecular geometry of the individual building blocks of both PBIs. These studies have demonstrated for the first time, that the block pattern of a supramolecular copolymer can be modulated by the experimental protocol through the approach of living supramolecular polymerization. Furthermore, by UV/vis analysis of the living copolymerization of MeO-PBI and MeS-PBI similar results were obtained showing also the formation of both A-B-A and B-A-B type supramolecular block copolymers. Although for these two PBIs the individual blocks could not be identified by AFM because the helical nanofibers of both PBIs exhibit identical helical pitches, these studies revealed for the first time that the approach of seeded living polymerization is not limited to a special pair of monomeric building blocks.
In the last part of the thesis (Chapter 5) a systematic study on the two-component living copolymerization of PBIs with various sterical demanding bay-substituents is provided. Thus, a series of PBIs containing identical hydrogen-bonding amide groups in imide position but variable number (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) or size (EtO-PBI, iPrO-PBI) of alkoxy bay-substituents was investigated. The molecular geometry of the monomeric building blocks has a strong impact on the thermodynamically and even more pronounced on the kinetically controlled aggregation in solvent mixtures of MCH and Tol. While the mono- and dialkoxy-substituted PBIs form kinetically metastable species, the self-assembly of the tri- and tetramethoxy-substituted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) is completely thermodynamically controlled. The two 1,7-alkoxy substituted PBIs (EtO-PBI, iPrO-PBI) form very similar to MeO-PBI kinetically off-pathway H-aggregates and thermodynamically more favored J-type aggregates. However, the stability of the kinetically metastable state is drastically lower and the conversion into the thermodynamically favored state much faster than for MeO-PBI. In contrast, the monomethoxy-substituted PBI derivative (1-MeO-PBI) forms a kinetically trapped species by intramolecular hydrogen-bonding of the monomers, which can be transformed into the thermodynamically favored nanofibers by seeded polymerization.
Importantly, the two-component seeded copolymerization of the kinetically trapped MeO PBI with seeds of other PBIs of the present series was studied by UV/vis and AFM revealing that the formation of supramolecular block copolymers is only possible for appropriate combinations of PBI building blocks. Thus, the seeded polymerization of the trapped state of the moderately core-twisted MeO-PBI with the, according to DFT-calculations, structurally similar PBIs (EtO-PBI and iPrO-PBI) leads to the formation of A-B-A block copolymers, like in the seeded copolymerization of MeO-PBItrapped with seeds of Cl-PBI and MeS-PBI already described in Chapter 4. However, by addition of seeds of the almost planar PBIs (H-PBI and 1-MeO-PBI) or seeds of the strongly core-twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) to the kinetically trapped state of MeO-PBI no block copolymers can be obtained. The mismatching geometry of these molecular building blocks strongly hampers both the intermolecular hydrogen-bonding and the π-π-interactions between the two different PBIs and consequently prevents the copolymerization process.
Furthermore, the studies of the two-component seeded copolymerization of the kinetically trapped species of 1-MeO-PBI with seeds of the other PBIs also corroborated that a precise shape complementarity is crucial to generate supramolecular block copolymers. Thus, by addition of seeds of H-PBI to the kinetically trapped monomers of 1-MeO-PBI supramolecular block copolymers were generated. Both PBIs exhibit an almost planar PBI core according to DFT-calculations leading to strong non-covalent interactions between these PBIs. This perfectly matching geometry of both PBIs also enables the inverted seeded copolymerization of the kinetically trapped monomers of H-PBI with 1-MeO-PBIseed concomitant with a switching of the block pattern of the supramolecular copolymer from A-B-A to B-A-B type. In contrast, the seeding with the moderately twisted (MeO-PBI, EtO-PBI and iPrO-PBI) and the strongly twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12 MeO-PBI) has no effect on the kinetically trapped state of 1-MeO-PBI, because the copolymerization of these PBIs is prevented by the mismatching geometry of the molecular building blocks.
In conclusion, the supramolecular polymerization and two-component seeded copolymerization of a series of PBI monomers was investigated within this thesis. The studies revealed that the thermodynamically and kinetically controlled self-assembly can be strongly modified by subtle changes of the monomeric building blocks. Moreover, the results have shown that living supramolecular polymerization is an exceedingly powerful method to generate unprecedented supramolecular polymeric nanostructures with controlled block pattern and length distribution. The formation of supramolecular block copolymers can only be achieved under precise kinetic control of the polymerization process and is strongly governed by the shape complementarity already imparted in the individual components. Thus, these insightful studies might enable a more rational design of monomeric building blocks for the non-covalent synthesis of highly complex supramolecular architectures with interesting properties for possible future applications, e.g., as novel functional materials.
Analog zu den auf hochgeordneten Farbstoffarchitekturen in den biologischen Photosyntheseapparaten basierenden Energiekonversionssystemen sollte die exakte Einstellung zwischenmolekularer Wechselwirkungen auch in künstlichen Halbleitern eine entscheidende Rolle für die Weiterentwicklung organischer Elektronikmaterialien spielen. Für eine derartige, präzise Steuerung der nanoskaligen Anordnung in organischen Materialien erscheinen Merocyaninfarbstoffe wegen ihrer hochgerichteten, dipolaren Aggregation äußerst aussichtsreich. In diesem Zusammenhang war das Ziel der vorliegenden Arbeit die Ausnutzung funktionaler, stark selbstorganisierender Merocyanine, um eine gezielte Beeinflussung der Morphologie in der aktiven Schicht von BHJ-Solarzellen zu erreichen. Hierzu sollte zunächst eine umfangreiche Serie komplexer Merocyanine synthetisiert und vollständig charakterisiert werden. Im Folgenden wurde angestrebt, die optischen und elektrochemischen Eigenschaften der molekular gelösten Farbstoffe zu bestimmen und für ausgewählte, geeignete Strukturen das Selbstorganisationsverhalten im Detail zu studieren. Zuletzt sollte durch eine sorgfältige Optimierung der Prozessierungsbedingungen ein Transfer der in Lösung gefundenen, supramolekularen Strukturen in den Blend lösungsprozessierter BHJ-Solarzellen erreicht werden. Die organischen Elektronikbauteile wurden dabei im Arbeitskreis von Prof. Dr. Klaus Meerholz (Universität Köln) gefertigt und charakterisiert.
Zusammenfassend zeichnet die vorliegende Arbeit ein umfassendes Bild von der Synthese funktionaler Merocyanine, dem Studium ihrer molekularen und Selbstorganisationseigenschaften sowie ihrer Anwendung als p-Halbleitermaterialien in organischen Solarzellen. Der komplexe Molekülaufbau der dargestellten Farbstoffe führte dabei zur Ausbildung verschiedener Farbstofforganisate, deren Struktur sowohl in Lösung als auch teilweise im Festkörper aufgeklärt werden konnte. Die erfolgreiche Implementierung von H-aggregierten Spezies der Verbindung 67b in die aktive Schicht organischer BHJ-Solarzellen resultierte in der Bildung effizienter Perkolationspfade für Exzitonen und freie Ladungsträger, wodurch diese Bauteile merklich höhere Stromdichten generieren konnten und gegenüber Zellen ohne H-Spezies über 20 % gesteigerte Effizienz aufwiesen. Diese Befunde verifizieren die postulierte Hypothese, dass eine gezielte Einstellung der zwischenmolekularen Wechselwirkungen bei organischen Halbleitern zu einer Optimierung der Funktionalität organischer Elektronikmaterialien beitragen kann.
In summary, it can be stated that the herein studied set of acceptor-substituted squaraine dyes can be seen as potent candidates for OTFTs. Furthermore, their transistor performance can be easily tuned to obtain hole mobilities up to 0.45 cm2/Vs from solution and 1.3 cm2/Vs from sublimation by choosing adequate deposition techniques. In the end, a probable structural model derived from studies of the thin-film morphology by methods such as optical spectroscopy, AFM and X-ray even facilitated the clarification of the observed charge transport behavior.
Zusammenfassend lässt sich festhalten, dass die in dieser Abreit vorgestellten Squaraine herausragend gute NIR-Absorptions- und NIR-Emissionseigenschaften aufweisen, die sie für zahlreiche Anwendungen interessant machen. Darüber hinaus konnte gezeigt werden, dass ihre besondere cis-Konfiguration und ihr daraus resultierendes Dipolmoment zu vorteilhaften Anordnungen in dünnen Filmen und in Blends mit PCBM führen. Diese Strukturen zeigen für dipolare Moleküle beeindruckende Exzitonen- und Ladungstransporteigenschaften, die vielversprechende Anwendungen in der organischen Elektronik wie in hier untersuchten lösungsprozessierten BHJ-Solarzellen oder auch in OFETs erwarten lassen.
Sialic acids are located at the termini of mammalian cell-surface glycostructures, which participate in essential interaction processes including adhesion of pathogens prior to infection and immunogenicity. Here we present the synthesis and bioorthogonal metabolic incorporation of the sialic acid analogue N-(1-oxohex-5-ynyl)neuraminic acid (Neu5Hex) into the cell-surface glycocalyx of a human larynx carcinoma cell line (HEp-2) and its fluorescence labelling by click chemistry.
A bis(trialkoxybenzamide)-functionalized quaterthiophene derivative was synthesized and its self-assembly properties in solution were studied. In non-polar solvents such as cyclohexane, this quaterthiophene π-system formed fibril aggregates with an H-type molecular arrangement due to synergistic effect of hydrogen bonding and π-stacking. The self-assembled fibres were found to gelate numerous organic solvents of diverse polarity. The charge transport ability of such elongated fibres of quaterthiophene π-system was explored by the pulse radiolysis time resolved microwave conductivity (PR-TRMC) technique and moderate mobility values were obtained. Furthermore, initial AFM and UV-vis spectroscopic studies of a mixture of our electron-rich quaterthiophene derivative with the electron acceptor [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) revealed a nanoscale segregated assembly of the individual building blocks in the blend.
The first part of this work focuses on the characterization of systems which complex electronic structures require the application of multi-reference methods. The anti-tumor efficacy of the natural product Neocarzinostatin is based on the formation of diradicals and causes DNA cleavage and finally cytolysis. Computations on model systems performed in the present work show the influence of structural features on the mode of action and the efficacy of this antitumor-antibiotic. The cyclization of systems related to the enyne-cumulene framework like the enyne-allenes was investigated earlier and relations to the more unusual class of enyne-ketenes are analyzed. The class of enyne-ketenes (and also the enyne-allenes) show a broad spectrum of possible intermediates (diradicals, zwitterions, allenes). The electronic structures of these intermediates are also possible for the (heteroatom substituted) 1,2,4-cyclohexatriene and a model for their energetic sequence based on high-level multi-reference computations is proposed. In all three projects the application of multi-reference approaches is necessary to obtain a comprehensive picture of the reactivity and electronic structure but also shows up the limits inherently existing in the currently available programs with respect to the size of the molecules. In the second part, algorithms for a multi-reference Moller-Plesset perturbation theory (MR-MP2) program, designed to perform large-scale computations, were developed and implemented. The MR-MP2 approach represents the most cost-effective multireference ansatz and requires an efficient evaluation of the Hamilton matrix for which an algorithm is designed to instantly recognize only non-vanishing matrix elements and to employ the recurring interaction patterns of the Hamilton matrix. The direct construction of the Hamilton matrix is additionally parallelized to work on cluster environments.
Ziel der vorliegenden Arbeit war es zum einen, das Potential von chiralen Eisenporphyrin- und Mangansalen-Katalysatoren zur kinetischen Racematspaltung sekundärer Allylalkohole durch asymmetrische Epoxidierung auszuloten. Zum anderen sollten Untersuchungen zum Mechanismus der Jacobsen-Katsuki-Epoxidierung durchgeführt werden; ein besonderes Augenmerk lag dabei auf der Fragestellung, welche Faktoren dazu führen, dass bei der Umsetzung von cis-Olefinen ein Gemisch aus cis- und trans-Epoxiden erhalten wird. Eine Auswahl arylsubstituierter Allylalkohole IIa-f wurde mit den Katalysatoren Ia und Ib,c und 0.8 bzw. 0.6 Äquivalenten an Iodosobenzol als Sauerstoffdonor umgesetzt (Gl. I), wobei es zu einer kinetischen Racematspaltung kommt. Die Oxidation verläuft für beide Katalysatorsysteme sowohl chemoselektiv (vorwiegend Epoxidierung) als auch diastereoselektiv (dr bis zu > 95:5). Als Hauptprodukte werden für die offenkettigen Allylalkohole IIa,e,f die threo-konfigurierten Epoxyalkohole III erhalten, während die cyclischen Allylakohole IIb-d die entsprechenden cis-Epoxyalkohole III lieferen. 1,1-Dimethyl-1,2-dihydro-2-naphthol (IIc) ist hierbei eine Ausnahme, da die CH-Oxidation dieses Substrats eine beachtliche Nebenreaktion darstellt. Der Hauptunterschied zwischen den Fe- und Mn-Katalysatoren liegt in der Enantioselektivität: Während mit dem Fe(porph*)-Komplex Ia nur Selektivitäten von maximal 43 Prozent ee (krel = 2.7) erzielt werden, erwiesen sich die Mn(salen*)-Komplexe Ib,c als geeignete Katalysatoren, mit denen ee-Werte von bis zu 80 Prozent (krel = 12.9) erreicht werden. Die in der kinetischen Racematspaltung erzielten Selektivitäten können durch ein synergistisches Zusammenwirken von hydroxy-dirigierendem Effekt einerseits und sterischen Wechselwirkungen zwischen Substrat und Eisen-Komplex oder, im Falle des Mangan-Komplexes, Angriff des Olefins entlang der so genannten Katsuki-Trajektorie andererseits erklärt werden. Fazit: Die chiralen Mn(salen*)-Komplexe Ib,c sind wirkungsvolle Katalysatoren für die asymmetrische Epoxidierung racemischer sekundärer Allylalkohole II. In exzellenten Chemo- und Diastereoselektivitäten entstehen die entsprechenden Epoxyalkohole III mit ee-Werten bis zu 80 Prozent. Die zurückbleibenden Allylalkohole werden dabei bis zu 53 Prozent ee angereichert. Im Vergleich dazu weist der Eisenkomplex Ia eine ungleich geringere Enantioselektivität auf. Mechanistische Untersuchungen mit Vinylcyclopropan Va ergeben, dass die Jacobsen-Katsuki-Epoxidierung nicht über ein kationisches, sondern über ein radikalisches Intermediat abläuft. Dies wird anhand von Produktstudien durch reversed phase-HPLC-Analytik belegt. In weitergehenden Untersuchungen mit cis-Stilben (Vb) und cis--Methylstyrol (Vc) als Sonden zur cis/trans-Isomerisierung wurde festgestellt, dass die Diastereoselektivität der Epoxidierung nicht nur vom Gegenion des Mangankatalysators Ib, sondern auch von der eingesetzten Sauerstoffquelle [OxD] abhängt. Daher musste der Katalysezyklus (Schema A) um eine diastereoselektivitäts-bestimmende Gabelung erweitert werden: Das primär entstehende MnIII(OxD)-Addukt kann entweder unter Abspaltung der Fluchtgruppe zum etablierten MnV(oxo)-Komplex reagieren (Weg 1) oder direkt das Olefin epoxidieren (Weg 2). Während die Sauerstoffübertragung durch die Oxo-Spezies stufenweise über ein Radikalintermediat verläuft und damit zu einer Mischung aus cis- und trans-Epoxid führt, erfolgt der Lewisäure-aktivierte Sauerstofftransfer konzertiert. Der Gegenion-Effekt auf die cis/trans-Isomerisierung erklärt sich dahingehend, dass die Natur des Anions (koordinierend oder nicht-koordinierend) die Lebensdauer des Radikalintermediats und/oder die Lage und Selektivität der Energiehyperflächen der verschiedenen Spinzustände des MnV(oxo)-Oxidans beeinflusst. Fazit: In der Jacobsen-Katsuki-Epoxidierung existiert neben dem etablierten MnV(oxo)-Oxidans zumindest noch ein weiteres; dabei handelt es sich um das MnIII(OxD)-Addukt, dessen Sauerstoff Lewissäure-aktiviert übertragen wird. Ein unterschiedlicher Anteil der beiden Reaktionskanäle erklärt die Unterschiede im Ausmaß der cis/trans-Isomerisierung. Auch das Gegenion des Mangan-Komplexes Ib beeinflusst die cis/trans-Diastereoselektivität. Mit koordinierenden Gegenionen dominiert Isomerisierung zum trans-Epoxid, während nicht-koordinierende Gegenionen bevorzugt zum cis-Epoxid führen.
No abstract available
Highly reactive methanesulfonates (mesylates, ROMs) have been prepared from 1-phenylethanol. cyclohex-2-en-1-ol, diphenylmethanol and p-methoxybenzyl alcohol by treatment with methanesulfonyl chloride and triethylamine in dichloro- or trichloro-methane at - 20 to 0 °C. The mesylates. characterised in solution by \(^1\)H and \(^{13}\)C NMR at -20 °C, were obtained in satisfactory purity (ca. 95%) in cold solutions but they decomposed by reaction with chloride, triethylamine or the parent alcohol. Rate constants for solvolyses in aqueous acetone and aqueous ethanol have been determined by a fast response conductimetric method. Product selectivities for solvolyses of pmethoxybenzyl mesylate in aqueous ethanol and methanol at 0 °C have been determined by HPLC. From additional new or Iiterature kinetic data for solvolyses of corresponding bromides. chlorides and p-nitrobenzoates (OPNB). Br/CI. OMs/Br and OMs/OPNB rate ratios were calculated; the results are consistent with electronic effects stabilising the carbocationic transition states and increasing OMs/Br rate ratios for these SN 1 solvolyses; none of the evidence supports a geminal electronic effect on Br/CI rate ratios (e.g. caused by stabilisation of the initial state in pmethoxybenzyl chloride). Steric effects on ester /halide rate ratios for solvolyses of tertiary substrates are confirmed. Relative rates over a 10\(^{16}\) range for ester and halide leaving groups are evaluated for solvolyses of 1-phenylethyl substrates in 80% ethanol-water. updating previous work by Noyce et al. (1972).
Density functional theory is applied to the calculation ofthe isotropic byperfine coupJing constants in some small molecules. Various functionals are tested. The agreement of the calculated values to experimental data and values obtained from sophisticated ab initio methods depends on the functionals used and the system under consideration. With respect to spin density calculations the functional of Lee, Yang and Parr with Becke's excbange functional (BLYP) is found to give good results for tbe heavier center of the CH and the NH molecule, while the spin densities of other molecules such as OH, H\(_2\)CN, H\(_2\)CO\(^+\), NO and O\(_2\) deviate considerably from experimental and/or other theoretical results (30%-60%). In cases where the singly occupied orbital can contribute to the isotropic hyperfine coupling constants, accurate results are obtained. The reason fortbis is analyzed.
Various structural possibilities for Si\(_3\)C\(_3\) clusters are investigated by ab initio calculations employing basis sets of double- and triple-zeta quality augmented by d polarization functions. Correlation effects are included by a second-order Moeller Piesset perturbation treatment. For the two lowest-lying structures higher-order correlation corrections and multi-reference effects are also included. Bonding features are investigated by two different types of population analyses to obtain insight into the nature of chemical bonding. A total of 17 stationary points were investigated, 14 of which correspond to local minima and three being transition states. The energetically lowest-lying structures are: A "pyramidlike" structure with various multicenter bonds, followed by a es symmetric isomer closely related to the ground state Si6 structure. Planar structures, favoured in small carbon clusters, lie higher in energy and are transition states. The lowest-lying triplet system is found to be the linear nonsymmetric Si - C-C-C-Si -Si structure, which is calculated to lie about 38 kcalfmole above the singlet ground state. A building-up principle based on bonding criteria is suggested for the occurence of the various structural possibilities.