Refine
Has Fulltext
- yes (15)
Is part of the Bibliography
- yes (15)
Year of publication
Document Type
- Doctoral Thesis (15)
Keywords
- Übergangsmetall (15) (remove)
Institute
Durch Untersuchungen zur Reaktivität von Boryl- und Boridverbindungen konnten deren Bindungssituationen aufgeklärt und neuartige Koordinationsmotive von Übergangsmetall-Bor-Verbindungen erhalten werden. Die erhaltenen Verbindungen wurden mittels NMR-Spektroskopie, IR-Spektroskopie, Elementaranalyse und Röntgendiffraktometrie untersucht und zusätzlich wurden DFT-Rechnungen angefertigt.
An verschieden substituierten Eisenborylkomplexen wurden Reaktivitätsuntersuchungen gegenüber Halogenidabstraktionsmitteln und Reduktionsmitteln durchgeführt und im Falle der Boridkomplexe wurden Verbindungen mit bis dato unbekanntem Strukturmotiv erhalten.
Die vorliegende Dissertation beschäftigt sich mit der Darstellung Übergangsmetall-substitutierter Silane und Untersuchungen zum Einfluss verschiedener Übergangsmetallsubstituenten auf die chemischen und spektroskopischen Eigenschaften dieser Klasse von Siliciumverbindungen. Dabei steht insbesondere die Synthese mehrfach metallierter Silanole und Siloxane im Vordergrund. A – Halogenierte Bis(metallo)silane: Durch schrittweise Umsetzung von HSiCl3 oder HSiCl2Me mit den Übergangsmetallaten Na[Fe(CO)2Cp] oder Li[W(CO)2PMe3Cp] wurden verschiedene bismetalliete Silane [LnM]2SiRCl (R = H, Me) aufgebaut. Durch weitere Derivatisierung konnten u.a. die Bis(ferrio)silane [Cp(OC)2Fe]2SiX2 (X = F, Cl, Br, I) dargestellt und z. T. durch Röntgenstrukturen charakterisiert werden. Aus diesen Verbindungen lassen sich durch photochemische CO-Eliminierung die µ2-silylenverbrückten Komplexe [Cp(OC)Fe]2(µ2-CO)(µ2-SiRHal) (R = Me, Halogen) gewinnen. B – Bis(metallo)silanole und –siloxane: Die unter A hergestellten Verbindungen dienten als Vorstufen zur Synthese der neuen Bis(ferrio)silanole [Cp(OC)2Fe]2SiX(OH) (X = H, Cl, OH) und des hetero-bismetallierten Silanols [Cp(OC)2Fe][Cp(OC)2PMe3]SiMe(OH). Dabei konnte lediglich [Cp(OC)2Fe]2SiH(OH) durch Hydrolyse des entsprechenden halogenierten Bis(ferrio)silans hergestellt werden. Alle anderen Bis(metallo)silanole wurden durch Oxygenierung der jeweiligen SiH-funktionellen Vorstufen mit Hilfe von Dimethyldioxiran synthetisiert. Alle Bis(metallo)silanole sind stabil bezüglich Eigenkondensation, lassen sich aber mit ClSiMe2H in die entsprechenden Siloxane [LnM]2SiR(OSiMe2H) umwandeln. C – Co2(CO)2 assistierte Hydrolyse von Silanen: Die Umsetzung verschiedener Si-H-funktioneller Silane R3Si-H mit Dicobaltoctacarbonyl führt unter H2-Entwicklung zu Cobaltio-Silanen R3Si-Co(CO)4. Diese besitzen eine extrem labile Si-CoBindung, welche sich durch zahlreiche protische Reagenzien spalten läßt. Es wurden u. a die Cobaltio-Silane Me3SiOSiMe2-Co(CO4), Me(OMe)2Si-Co(CO)4 und Ph2SiCo2(CO)7 generiert und durch Hydrolyse in verschiedene Silanole oder Siloxane überführt. Eine direkte hydrolytische SiH/SiOH-Umwandlung ist auch in Gegenwart katalytischer Mengen Co2(CO)8 möglich und wurde u.a. zur Darstellung des Bis(ferrio)siloxanols [Cp(OC)2Fe]2Si(OH)(OSiMe2H) genutzt. D – DFT-Berechnungen an Übergangsmetallverbindungen von Silicium und Phosphor: Die Strukturen der dimeren Siloxygallane (RH2SiOGaMe2)2 (R = H, tBu) wurden theoretisch berechnet. Man findet eine starke Abhängigkeit der Geometrie des zentralen viergliedrigen Ga-O-Ga-O-Ringes von Größe und relativen Position der exocyclischen Substituenten R. Struktur- und NBO-Analyse des cyclischen Metallasiloxans Cp(OC)(H)Fe[SiMe2O]2SiMe2 belegen den Einfluß des Cp(OC)(H)Fe-Fragmentes auf Struktur und Bindungsverhältnisse des Heterosiloxan Ringes. Relative thermodynamische Stabilitäten wurden für die diastereomeren Formen des kationischen Phosphankomplexe lk/ul-Cp*(OC)2Fe-P(Ph)(H)[CH(CO2Me)CH2CO2Me]+ und des µ2-silylenbrückten Eisenkomplexes cis/trans-[Cp(OC)Fe]2(µ2-CO)(µ2-SiH2) theoretisch berechnet.
Im Rahmen dieser Arbeit wurde die Übergangsmetall-katalysierte Diborierung verschiedener ungesättigter Substrate untersucht. Die Diborierung von Dialkinen ermöglichte die Synthese einer Reihe neuer Verbindungen, welche sich in drei Gruppen einteilen lassen: i) Einkernige [4]Diboradicarbaferrocenophane, die zusätzlich entweder direkt oder über einen Spacer eine CC Dreifachbindung tragen; ii) zweikernige Komplexe, bei denen das [4]Ferrocenophanfragment über die zweite CC Dreifachbindung an ein niedervalentes Platinfragment koordiniert ist und iii) zweikernige Bis [4]diboradicarbaferrocenophane durch die Diborierung beider Dreifachbindungen des Dialkins. Von den vier Vertreter von Gruppe i) ist bei zweien die zweite CC Dreifachbindung direkt an die Bis(boryl)alkeneinheit gebunden, während bei den anderen eine Spacergruppe vorhanden ist. Die Darstellung der Komplexe kann entweder durch katalytische Diborierung der Dialkine durch [Fe{C5H4B(NMe2)}2] oder durch direkte Umsetzung mit [Fe{C5H4B(NMe2)}2Pt(PEt3)2] erfolgen. Hingegen führt die Umsetzung von [Fe{C5H4B(NMe2)}2Pt(PEt3)2] mit äquimolaren Mengen Dialkin zur Bildung der zweiten Verbindungen von Gruppe ii). Hier ist die zweite CC Dreifachbindung an ein [Pt(PEt3)2] Fragment koordiniert, wodurch ein Platinalkinkomplex entsteht. Unter den Produkten der Gruppe iii) sind zuerst die Komplexe zu nennen, die zwei Ferrocenophangruppen tragen. Die so synthetisierten Produkte weisen jeweils zwei chirale Ebenen auf und wurden deshalb als Diastereomerenpaare erhalten. Es konnte gezeigt werden, dass die einzelnen Diastereomere durch Erhitzen in Lösung ineinander umgewandelt werden können. Mittels DFT-Rechnungen konnte zudem ein plausibler Mechanismus aufgedeckt werden. Neben den Bis [4]ferrocenophanen wurde ein Komplex dargestellt, in dem ein [4]Diboradicarbaferrocenophanfragment über eine Spacerfunktion an einen entsprechenden von Bis(benzol)chrom abgeleiteten Metalloarenophanrest gebunden ist. Weiterhin wurden durch Umsetzung von [Pt(PEt3)3] mit den entsprechenden Dialkinen in unterschiedlicher Stöchiometrie jeweils drei einkernige bzw. zweikernige Platinalkinkomplexe sowie ein Platinalkenkomplex synthetisiert. Die IR-spektroskopischen Untersuchungen legen die Formulierung als Platinacyclopropene bzw. Platinacyclopropane nahe. Durch die Diborierung von Isocyaniden konnte unter bemerkenswert milden Reaktionsbedingungen eine Reihe von chiralen, einkernigen Bis(boryl)iminokomplexen dargestellt werden. Die Synthese verläuft entweder durch direkte Umsetzung der Diborane(4) mit den entsprechenden Isocyaniden oder, mit verlängerten Reaktionszeiten auch durch Diborierung der Isocyanide mittels der entsprechenden [3]Metalloarenophane. Durch Umsetzung von [2]Borametalloarenophanen mit Diisocyaniden konnten zudem verschiedene zwei- bzw. dreikernige Bis(boryl)iminokomplexe zugänglich gemacht werden. Die hierzu ausgewählten Diisocyanide tragen wiederum eine Spacereinheit zwischen den beiden NC Funktionalitäten. Genau wie bei den Reaktionen von Dialkinen treten auch hier die Produkte als Paare von Diastereomeren auf. Ein weiteres Projekt beschäftigte sich mit der oxidativen Addition von [Fe{C5H4B(NMe2)}2] an verschiedene Übergangsmetallkomplexe. Die Umsetzungen führten allerdings in keinem Fall zur Bildung der gewünschten Bis(boryl)metallkomplexe. Bei verschiedenen Platinkomplexen kann jedoch die Bildung eines einheitlichen Produkts beobachtet werden. Es wird deshalb in Übereinstimmung mit den spektroskopischen Daten vermutet, dass es sich dabei um ein [2.2]Diboraferrocenophan handelt. Eine saubere Isolierung des Produkts gelingt jedoch nicht, weshalb der strukturelle Nachweis bislang nicht geführt werden kann. Abschließend konnte dabei gezeigt werden, dass mehrtägiges Erhitzen von [Fe{C5H4B(NMe2)}2Pt(PEt3)2] in Lösung hochselektiv zur Bildung des mutmaßlichen [2.2]Diboraferrocenophans führt. Weiterhin ist auch die Umsetzung von [Fe{C5H4B(NMe2)}2] mit katalytischen Mengen [Pt{P(CH2Cy)3}2] erfolgreich, führte jedoch nicht zu einer Isolierung des Produkts in Substanz.
Organoboron compounds, such as benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates, have been synthesized via metal-catalyzed borylations of sp3 C-O and C-H bonds. Thus, Cu-catalyzed borylations of alcohols and their derivatives provide benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates via nucleophilic substitution. The employment of Ti(OiPr)4 turns the OH moiety into a good leaving group (‘OTi’). The products of Pd-catalyzed oxidative borylations of allylic C-H bonds of alkenes were isolated and purified, and their application in the one-pot synthesis of stereodefined homoallyl alcohols was also investigated. Chapter 2 presents a copper-catalyzed synthesis of benzyl-, allyl-, and allenyl-boronates from benzylic, allylic, and propargylic alcohols, respectively, employing a commercially available catalyst precursor, [Cu(CH3CN)4]2+[BF4-]2, and Xantphos as the ligand. The borylation of benzylic alcohols was carried out at 100 oC with 5-10 mol % [Cu(CH3CN)4]2+[BF4-]2, which afforded benzylic boronates in 32%-95% yields. With 10 mol % [Cu(CH3CN)4]2+[BF4-]2, allylic boronates were provided in 53%-89% yields from the borylation of allylic alcohols at 60 or 100 oC. Secondary allylboronates were prepared in 72%-84% yields from the borylation of primary allylic alcohols, which also suggests that a nucleophilic substitution pathway is involved in this reaction. Allenylboronates were also synthesized in 72%-89% yields from the borylation of propargylic alcohols at 40 or 60 oC. This methodology can be extended to borylation of benzylic and allylic acetates. This protocol exhibits broad reaction scope (40 examples) and high efficiency (up to 95% yield) under mild conditions, including the preparation of secondary allylic boronates. Preliminary mechanistic studies suggest that nucleophilic substitution is involved in this reaction. Chapter 3 reports an efficient methodology for the synthesis of vinyl-, allyl-, and (E)-2-boryl allylboronates from propargylic alcohols via copper-catalyzed borylation reactions under mild conditions. In the presence of a commercially available catalyst precursor (Cu(OAc)2 or Cu(acac)2) and ligand (Xantphos), the reaction affords the desired products in up to 92% yield with a broad substrate scope (43 examples). Vinylboronates were synthesized in 50%-83% yields via Cu-catalyzed hydroboration of mono-substituted propargylic alcohols. With 1,1-disubstituted propargylic alcohols as the starting materials and Cu(OAc)2 as the catalyst precursor, a variety of allylboronates were synthesized in 44%-83% yields. The (E)-2-boryl allylboronates were synthesized in 54%-92% yields via the Cu-catalyzed diboration of propargylic alcohols. The stereoselectivity is different from the Pd(dba)2-catalyzed diboration of allenes that provided (Z)-2-boryl allylboronates predominantly. The isolation of an allenyl boronate as the reaction intermediate suggests that an SN2’-type reaction, followed by borylcupration, is involved in the mechanism of the diboration of propargylic alcohols. In chapter 4, a Pd-catalyzed allylic C-H borylation of alkenes is reported. The transformation exhibits high regioselectivity with a variety of linear alkenes, employing a Pd-pincer complex as the catalyst precursor, and the allylic boronate products were isolated and purified. This protocol can also be extended to one-pot carbonyl allylation reactions to provide homoallyl alcohols efficiently. An interesting mechanistic feature is that the reaction proceeds via a Pd(II)/Pd(IV) catalytic cycle. Formation of the Pd(IV) intermediate occurs by a unique combination of an NCNpincer complex and application of F-TEDA-BF4 as the oxidant. An important novelty of the present C-H borylation reaction is that all allyl-Bpin products can be isolated with usually high yields. This is probably a consequence of the application of the NCN-pincer complex as catalyst, which selectively catalyzes C-B bond formation avoiding subsequent C-B bond cleavage based side-reactions
The theoretical work presented in this thesis is concerned with the highest possible oxidation states of the 5d transition metal row. Based on a validation study of several DFT functionals against accurate coupled-cluster CCSD(T) methods we will present calculations on a series of new high oxidation state HgIV species. Quantum-chemical calculations have also been applied to various fluoro complexes of gold in oxidation states +V through +VII to evaluate the previously claimed existence of AuF7. The calculations indicate clearly that the oxidation state (+V), e.g., in [AuF5]2, remains the highest well-established gold oxidation state. Further calculations on iridium in oxidation state (+VII) show that IrF7 and IrOF5 are viable synthetic targets, whereas higher oxidation states of iridium appear to be unlikely. Structures and stabilities of several osmium fluorides and oxyfluorides were also studied in this thesis. It is shown that homoleptic fluorides all the way up to OsF8 may exist. Combining the results of the most accurate quantum-chemical predictions of this thesis and of the most reliable experimental studies, we observe a revised trend of the highest oxidation states of the 5d transition metal row. From lanthanum (+III) to osmium (+VIII), there is a linear increase of the highest oxidation states with increasing atomic number. Thereafter, we observe a linear descent from osmium (+VIII) to mercury (+IV). We will also present a short outlook to the transition metals of the 3d and 4d row and their highest reachable oxidation states.
Bisdiynes undergo Pd(0)-catalyzed cyclization, forming azulene and naphthalene products. When dibenzylideneacetone is present in the reaction, it undergoes a [2+2+2] cyclization with the bisdiyne, forming cyclohexadiene derivatives. Ni(0) catalyzes the [2+2+2] cycloaddition of diynes with tolanes towards alkynylated o-terphenyl derivatives. The D-A substituted products are solvatochromic, fluorescent dyes with high quantum yields and short lifetimes. Bis-triarylborane tetrayne dyes were synthesized in both neutral and tetracationic forms, as potential DNA/RNA sensor. Both molecules are weakly fluorescent in solution and exhibit characteristic alkyne absorptions in the Raman spectra. Tributyl phosphine catalyzes the trans-hydroboration of 1,3-butadiynes with HBpin. We confirmed experimentally via NMR and HRMS experiments, that phosphine attack on the diyne is a key step in the catalytic cycle.
Im Rahmen dieser Doktorarbeit sind neue Borylenkomplexe synthetisiert worden, die am Boratom keinen pi-Donor tragen und eine umfangreiche Chemie ermöglichen. Zum Beispiel wurde eine [2+2]-Cycloaddition und eine Metathesereaktion eines Borylenkomplexes beobachtet. Ebenfalls wurde ein stabiles Bornucleophil erhalten.
Im Rahmen dieser Arbeit ist es gelungen, neue Boryl- und Borylenkomplexe von Palladium und Platin darzustellen. Die vollständige Charakterisierung dieser Verbindungen ermöglicht ees, Rückschlüsse auf die Natur der Metall-Bor-Bindung zu ziehen und trägt so zu einem besseren Verständnis dieser Substanzklasse bei. Überdies konnten bisher unbekoannte Koordinationsmodi für den Borliganden nachgewiesen werden. ...
Unter Ausnutzung der Reaktivität von Borylanionen wurden neuartige Übergangsmetallboridokomplexe synthetisiert, bei denen ein "nacktes" Boratom als Ligand für bis zu vier Übergangsmetalle vorliegt. Strukturelle und bindungstheoretische Eigenschaften der Boridokomplexe wurden mit gängigen metallorganischen Analysemethoden sowie mit DFT-Methoden untersucht. Dabei zeigte sich, dass die erhaltenen Tetrametalloboridokomplexe eine planare Koordinationsgeometrie um das Borzentrum aufweisen und damit ein Äquivalent zu anti van't Hoff/Le Bel-Verbindungen des Kohlenstoffs darstellen.
In this thesis the electronic and magnetic structure of the transition metal oxyhalides TiOCl, TiOBr and VOCl is investigated. The main experimental methods are photoemission (PES) and x-ray absorption (XAS) spectroscopy as well as resonant inelastic x-ray scattering (RIXS). The results are compared to density-functional theory, and spectral functions from dynamical mean-field theory and different kinds of model calculations. Questions addressed here are those of the dimensionality of the magnetic and electronic interactions, the suitability of the oxyhalides as prototypical strongly correlated model systems, and the possibility to induce a filling-controlled insulator-metal transition. It turns out that TiOCl is a quasi-one-dimensional system with non-negligible two-dimensional coupling, while the one-dimensional character is already quite suppressed in TiOBr. In VOCl no signatures of such one-dimensional behavior remain, and it is two-dimensional. In all cases, frustrations induced by the crystal lattice govern the magnetic and electronic properties. As it turns out, although the applied theoretical approaches display improvements compared to previous studies, the differences to the experimental data still are at least partially of qualitative instead of quantitative nature. Notably, using RIXS, it is possible for the first time in TiOCl to unambiguously identify a two-spinon excitation, and the previously assumed energy scale of magnetic excitations can be confirmed. By intercalation of alkali metal atoms (Na, K) the oxyhalides can be doped with electrons, which can be evidenced and even quantified using x-ray PES. In these experiments, also a particular vertical arrangement of dopants is observed, which can be explained, at least within experimental accuracy, using the model of a so-called "polar catastrophe". However, no transition into a metallic phase can be observed upon doping, but this can be understood qualitatively and quantitatively within an alloy Hubbard model due to the impurity potential of the dopants. Furthermore, in a canonical way a transfer of spectral weight can be observed, which is a characteristic feature of strongly correlated electron systems. Overall, it can be stated that the transition metal oxyhalides actually can be regarded as prototypical Mott insulators, yet with a rich phase diagram which is far from being fully understood.