Refine
Has Fulltext
- yes (5)
Is part of the Bibliography
- yes (5)
Document Type
- Doctoral Thesis (5)
Language
- English (5) (remove)
Keywords
- Modellierung (5) (remove)
Institute
- Institut für Geographie und Geologie (5) (remove)
The study investigates the water resources and aquifer dynamics of the igneous fractured aquifer-system of the Troodos Mountains in Cyprus, using a coupled, finite differences water balance and groundwater modelling approach. The numerical water balance modelling forms the quantitative framework by assessing groundwater recharge and evapotranspiration, which form input parameters for the groundwater flow models. High recharge areas are identified within the heavily fractured Gabbro and Sheeted Dyke formations in the upper Troodos Mountains, while the impervious Pillow Lava promontories - with low precipitation and high evapotranspiration - show unfavourable recharge conditions. Within the water balance studies, evapotranspiration is split into actual evapotranspiration and the so called secondary evapotranspiration, representing the water demand for open waters, moist and irrigated areas. By separating the evapotranspiration of open waters and moist areas from the one of irrigated areas, groundwater abstraction needs are quantified, allowing the simulation of single well abstraction rates in the groundwater flow models. Two sets of balanced groundwater models simulate the aquifer dynamics in the presented study: First, the basic groundwater percolation system is investigated using two-dimensional vertical flow models along geological cross-sections, depicting the entire Troodos Mountains up to a depth of several thousands of metres. The deeply percolating groundwater system starts in the high recharge areas of the upper Troodos, shows quasi stratiform flow in the Gabbro and Sheeted Dyke formations, and rises to the surface in the vicinity of the impervious Pillow Lava promontories. The residence times mostly yield less than 25 years, the ones of the deepest fluxes several hundreds of years. Moreover, inter basin flow and indirect recharge of the Circum Troodos Sedimentary Succession are identified. In a second step, the upper and most productive part of the fractured igneous aquifer-system is investigated in a regional, horizontal groundwater model, including management scenarios and inter catchment flow studies. In a natural scenario without groundwater abstractions, the recovery potential of the aquifer is tested. Predicted future water demand is simulated in an increased abstraction scenario. The results show a high sensitivity to well abstraction rate changes in the Pillow Lava and Basal Group promontories. The changes in groundwater heads range from a few tens of metres up to more than one hundred metres. The sensitivity in the more productive parts of the aquifer-system is lower. Inter-catchment flow studies indicate that - besides the dominant effluent conditions in the Troodos Mountains - single reaches show influent conditions and are sub-flown by groundwater. These fluxes influence the local water balance and generate inter catchment flow. The balanced groundwater models form thus a comprehensive modelling system, supplying future detail models with information concerning boundary conditions and inter-catchment flow, and allowing the simulation of impacts of landuse or climate change scenarios on the dynamics and water resources of the Troodos aquifer-system.
The urban micro climate has been increasingly recognised as an important aspect for urban planning. Therefore, urban planners need reliable information on the micro climatic characteristics of the urban environment. A suitable spatial scale and large spatial coverage are important requirements for such information. This thesis presents a conceptual framework for the use of airborne hyperspectral data to support urban micro climate characterisation, taking into account the information needs of urban planning. The potential of hyperspectral remote sensing in characterising the micro climate is demonstrated and evaluated by applying HyMap airborne hyperspectral and height data to a case study of the German city of Munich. The developed conceptual framework consists of three parts. The first is concerned with the capabilities of airborne hyperspectral remote sensing to map physical urban characteristics. The high spatial resolution of the sensor allows to separate the relatively small urban objects. The high spectral resolution enables the identification of the large range of surface materials that are used in an urban area at up to sub-pixel level. The surface materials are representative for the urban objects of which the urban landscape is composed. These spatial urban characteristics strongly influence the urban micro climate. The second part of the conceptual framework provides an approach to use the hyperspectral surface information for the characterisation of the urban micro climate. This can be achieved by integrating the remote sensing material map into a micro climate model. Also spatial indicators were found to provide useful information on the micro climate for urban planners. They are commonly used in urban planning to describe building blocks and are related to several micro climatic parameters such as temperature and humidity. The third part of the conceptual framework addresses the combination and presentation of the derived indicators and simulation results under consideration of the planning requirements. Building blocks and urban structural types were found to be an adequate means to group and present the derived information for micro climate related questions to urban planners. The conceptual framework was successfully applied to a case study in Munich. Airborne hyperspectral HyMap data has been used to derive a material map at sub-pixel level by multiple endmember linear spectral unmixing. This technique was developed by the German Research Centre for Geosciences (GFZ) for applications in Dresden and Potsdam. A priori information on building locations was used to support the separation between spectrally similar materials used both on building roofs and non-built surfaces. In addition, surface albedo and leaf area index are derived from the HyMap data. The sub-pixel material map supported by object height data is then used to derive spatial indicators, such as imperviousness or building density. To provide a more detailed micro climate characterisation at building block level, the surface materials, albedo, leaf area index (LAI) and object height are used as input for simulations with the micro climate model ENVI-met. Concluding, this thesis demonstrated the potential of hyperspectral remote sensing to support urban micro climate characterisation. A detailed mapping of surface materials at sub-pixel level could be performed. This provides valuable, detailed information on a large range of spatial characteristics relevant to the assessment of the urban micro climate. The developed conceptual framework has been proven to be applicable to the case study, providing a means to characterise the urban micro climate. The remote sensing products and subsequent micro climatic information are presented at a suitable spatial scale and in understandable maps and graphics. The use of well-known spatial indicators and the framework of urban structural types can simplify the communication with urban planners on the findings on the micro climate. Further research is needed primarily on the sensitivity of the micro climate model towards the remote sensing based input parameters and on the general relation between climate parameters and spatial indicators by comparison with other cities.
Irrigated agriculture in the Khorezm region in the arid inner Aral Sea Basin faces enormous challenges due to a legacy of cotton monoculture and non-sustainable water use. Regional crop growth monitoring and yield estimation continuously gain in importance, especially with regard to climate change and food security issues. Remote sensing is the ideal tool for regional-scale analysis, especially in regions where ground-truth data collection is difficult and data availability is scarce. New satellite systems promise higher spatial and temporal resolutions. So-called light use efficiency (LUE) models are based on the fraction of photosynthetic active radiation absorbed by vegetation (FPAR), a biophysical parameter that can be derived from satellite measurements. The general objective of this thesis was to use satellite data, in conjunction with an adapted LUE model, for inferring crop yield of cotton and rice at field (6.5 m) and regional (250 m) scale for multiple years (2003-2009), in order to assess crop yield variations in the study area. Intensive field measurements of FPAR were conducted in the Khorezm region during the growing season 2009. RapidEye imagery was acquired approximately bi-weekly during this time. The normalized difference vegetation index (NDVI) was calculated for all images. Linear regression between image-based NDVI and field-based FPAR was conducted. The analyses resulted in high correlations, and the resulting regression equations were used to generate time series of FPAR at the RapidEye level. RapidEye-based FPAR was subsequently aggregated to the MODIS scale and used to validate the existing MODIS FPAR product. This step was carried out to evaluate the applicability of MODIS FPAR for regional vegetation monitoring. The validation revealed that the MODIS product generally overestimates RapidEye FPAR by about 6 to 15 %. Mixture of crop types was found to be a problem at the 1 km scale, but less severe at the 250 m scale. Consequently, high resolution FPAR was used to calibrate 8-day, 250 m MODIS NDVI data, this time by linear regression of RapidEye-based FPAR against MODIS-based NDVI. The established FPAR datasets, for both RapidEye and MODIS, were subsequently assimilated into a LUE model as the driving variable. This model operated at both satellite scales, and both required an estimation of further parameters like the photosynthetic active radiation (PAR) or the actual light use efficiency (LUEact). The latter is influenced by crop stress factors like temperature or water stress, which were taken account of in the model. Water stress was especially important, and calculated via the ratio of the actual (ETact) to the potential, crop-specific evapotranspiration (ETc). Results showed that water stress typically occurred between the beginning of May and mid-September and beginning of May and end of July for cotton and rice crops, respectively. The mean water stress showed only minor differences between years. Exceptions occurred in 2008 and 2009, where the mean water stress was higher and lower, respectively. In 2008, this was likely caused by generally reduced water availability in the whole region. Model estimations were evaluated using field-based harvest information (RapidEye) and statistical information at district level (MODIS). The results showed that the model at both the RapidEye and the MODIS scale can estimate regional crop yield with acceptable accuracy. The RMSE for the RapidEye scale amounted to 29.1 % for cotton and 30.4 % for rice, respectively. At the MODIS scale, depending on the year and evaluated at Oblast level, the RMSE ranged from 10.5 % to 23.8 % for cotton and from -0.4 % to -19.4 % for rice. Altogether, the RapidEye scale model slightly underestimated cotton (bias = 0.22) and rice yield (bias = 0.11). The MODIS-scale model, on the other hand, also underestimated official rice yield (bias from 0.01 to 0.87), but overestimated official cotton yield (bias from -0.28 to -0.6). Evaluation of the MODIS scale revealed that predictions were very accurate for some districts, but less for others. The produced crop yield maps indicated that crop yield generally decreases with distance to the river. The lowest yields can be found in the southern districts, close to the desert. From a temporal point of view, there were areas characterized by low crop yields over the span of the seven years investigated. The study at hand showed that light use efficiency-based modeling, based on remote sensing data, is a viable way for regional crop yield prediction. The found accuracies were good within the boundaries of related research. From a methodological viewpoint, the work carried out made several improvements to the existing LUE models reported in the literature, e.g. the calibration of FPAR for the study region using in situ and high resolution RapidEye imagery and the incorporation of crop-specific water stress in the calculation.
Landslide susceptibility assessment in the Chiconquiaco Mountain Range area, Veracruz (Mexico)
(2022)
In Mexico, numerous landslides occur each year and Veracruz represents the state with the third highest number of events. Especially the Chiconquiaco Mountain Range, located in the central part of Veracruz, is highly affected by landslides and no detailed information on the spatial distribution of existing landslides or future occurrences is available. This leaves the local population exposed to an unknown threat and unable to react appropriately to this hazard or to consider the potential landslide occurrence in future planning processes.
Thus, the overall objective of the present study is to provide a comprehensive assessment of the landslide situation in the Chiconquiaco Mountain Range area. Here, the combination of a site-specific and a regional approach enables to investigate the causes, triggers, and process types as well as to model the landslide susceptibility for the entire study area.
For the site-specific approach, the focus lies on characterizing the Capulín landslide, which represents one of the largest mass movements in the area. In this context, the task is to develop a multi-methodological concept, which concentrates on cost-effective, flexible and non-invasive methods. This approach shows that the applied methods complement each other very well and their combination allows for a detailed characterization of the landslide.
The analyses revealed that the Capulín landslide is a complex mass movement type. It comprises rotational movement in the upper parts and translational movement in the lower areas, as well as flow processes at the flank and foot area and therefore, is classified as a compound slide-flow according to Cruden and Varnes (1996). Furthermore, the investigations show that the Capulín landslide represents a reactivation of a former process. This is an important new information, especially with regard to the other landslides identified in the study area. Both the road reconstructed after the landslide, which runs through the landslide mass, and the stream causing erosion processes at the foot of the landslide severely affect the stability of the landslide, making it highly susceptible to future reactivation processes. This is particularly important as the landslide is located only few hundred meters from the village El Capulín and an extension of the landslide area could cause severe damage.
The next step in the landslide assessment consists of integrating the data obtained in the site-specific approach into the regional analysis. Here, the focus lies on transferring the generated data to the entire study area. The developed methodological concept yields applicable results, which is supported by different validation approaches.
The susceptibility modeling as well as the landslide inventory reveal that the highest probability of landslides occurrence is related to the areas with moderate slopes covered by slope deposits. These slope deposits comprise material from old mass movements and erosion processes and are highly susceptible to landslides. The results give new insights into the landslide situation in the Chiconquiaco Mountain Range area, since previously landslide occurrence was related to steep slopes of basalt and andesite.
The susceptibility map is a contribution to a better assessment of the landslide situation in the study area and simultaneously proves that it is crucial to include specific characteristics of the respective area into the modeling process, otherwise it is possible that the local conditions will not be represented correctly.
The Mediterranean area reveals a strong vulnerability to future climate change due to a high exposure to projected impacts and a low capacity for adaptation highlighting the need for robust regional or local climate change projections, especially for extreme events strongly affecting the Mediterranean environment. The prevailing study investigates two major topics of the Mediterranean climate variability: the analysis of dynamical downscaling of present-day and future temperature and precipitation means and extremes from global to regional scale and the comprehensive investigation of temperature and rainfall extremes including the estimation of uncertainties and the comparison of different statistical methods for precipitation extremes. For these investigations, several observational datasets of CRU, E-OBS and original stations are used as well as ensemble simulations of the regional climate model REMO driven by the coupled global general circulation model ECHAM5/MPI-OM and applying future greenhouse gas (GHG) emission and land degradation scenarios.