Refine
Has Fulltext
- yes (3)
Is part of the Bibliography
- yes (3)
Year of publication
- 2013 (3) (remove)
Document Type
- Doctoral Thesis (3)
Keywords
- Quantenpunkt (2)
- Einzelphotonenemission (1)
- Fotovoltaik (1)
- Giant Zeeman splitting (1)
- II-VI (1)
- Interbandübergang (1)
- Intermediate Band Solar Cell (1)
- Leerlaufspannung (1)
- Magnetische Eigenschaft (1)
- Organische Solarzelle (1)
Institute
- Fakultät für Physik und Astronomie (3) (remove)
This thesis presents the detailed development of the fabrication process and the first observations of artificial magnetic atoms from the II-VI diluted magnetic semiconductor alloy (Zn,Cd,Be,Mn)Se. In order to manufacture the vertical quantum dot device which exhibits artificial atom behavior a number of development steps are conducted. First, the II-VI heterostructure is adjusted for the linear transport regime. Second, state of the art vertical quantum dot fabrication techniques in the III-V material system are investigated regarding their portability to the II-VI heterostructure. And third, new approaches to the fabrication process are developed, taking into account the complexity of the heterostructure and its physical properties. Finally a multi-step fabrication process is presented, which is built up from electron beam and optical lithography, dry and wet etching and insulator deposition. This process allows for the processing of pillars with diameters down to 200 nm with an insulating dielectric and gate. Preliminary transport data on the fabricated vertical quantum dots are presendted confirming the magnetic nature of the resulting artificial atoms.
Die vorliegende Arbeit beschreibt die Charakterisierung von Halbleiter-Quantenpunkten (QP) in unterschiedlichen Materialsystemen. Die hier dargelegten Untersuchungen wurden mit verschiedenen Methoden der optischen Spektroskopie durchgeführt. Zu Beginn der Arbeit werden theoretische Grundlagen von QP hinsichtlich ihrer elektronischen Struktur und statistischen Eigenschaften erläutert. Darüber hinaus wird näher auf die Physik von Solarzellen eingegangen, in dem die relevanten Gleichungen für die Beschreibung des Ladungsträgertransportes hergeleitet und diskutiert werden.
Darauf folgend werden die experimentelle Methoden erklärt, welche zur Charakterisierung der jeweiligen Proben dienten. Besonderes Augenmerk wird auf die Methode zur Messung des Zwei-Photonen-Absorptionsprozesses gelegt.
Der Abschnitt der experimentell gewonnenen Ergebnisse beginnt mit Untersuchungen an einzelnen, spektral isolierten InP QP, welche mit ultralangsamen Wachstumsraten hergestellt wurden. Aufgrund der sehr geringen Flächendichte konnten grundlegende physikalische Eigenschaften von QP ohne zusätzliche laterale Strukturierungen studiert werden. Mittels Messungen in Abhängigkeit der Anregungsleistung und Detektion in Abhängigkeit der Polarisation konnten die verschiedenen Lumineszenzlinien eines QP-Spektrums den jeweiligen exzitonischen Zuständen zugeordnet werden. Zusätzlich wurden die QP in einem externen Magnetfeld in Faraday-Konfiguration untersucht. Abschließend durchgeführte Autokorrelationsmessungen erlaubten die Untersuchung der zeitlichen Statistik der QP-Photonen. Es konnte die Emission einzelner Photonen nachgewiesen werden.
Anschließend folgen spektroskopische Untersuchungen von InP QP, welche mittels sequentiellen Wachstums hergestellt wurden. Anhand von Messungen in Abhängigkeit der Anregungsleistung und bestätigt durch zeitaufgelöste Messungen am QP-Ensemble wurde eine bimodale QP-Verteilung mit Typ-I und Typ-II Bandverlauf bestimmt. Zusätzlich konnten an einzelnen, spektral isolierten QP verschiedene Exziton-Zustände identifiziert werden, bevor abschließend Autokorrelationsmessungen die Emission einzelner Photonen demonstrierten.
Zur Steigerung der Auskoppeleffizienz der Photonen wurden InP QP in Mikrosäulenresonatoren, bestehend aus zwei Bragg-Spiegeln mit einer dazwischenliegenden GaInP Kavität, eingebettet. Anfangs wurde die Emission der Kavitätsmode von Strukturen mit unterschiedlichen lateralen Durchmessern charakterisiert. Mittels Temperaturverstimmung konnte die Energie eines einzelnen QP-Exzitons in Resonanz mit der Resonatormode gebracht werden. Im Regime der schwachen Wechselwirkung wurde eine signifikante Überhöhung der Lumineszenzintensität aufgrund des Purcell-Effektes gemessen. Zusätzlich wurde im Regime der schwachen Kopplung die Emission einzelner Photonen anhand von Korrelationsmessungen nachgewiesen. Im zweiten Schritt wurden die QP-Mikrosäulenresonatorstrukturen elektrisch angeregt. Nach einer grundlegenden Charakterisierung konnte auch hier mittels Temperaturverstimmung die Energie der Resonatormode mit der eines Exziton in Resonanz gebracht werden. Im Regime der schwachen Wechselwirkung stieg die Intensität der Lumineszenz aufgrund des Purcell-Effekts signifikant an. Zum Abschluss bestätigen Korrelationsmessungen den Nachweis der Emission einzelner Photonen.
In Kapitel 6 werden die Eigenschaften von InGaN QP genauer analysiert. Nitrid-Verbindungshalbleiter kristallieren vorzugsweise stabil in der Wurtzit-Kristallstruktur. Polare Kristallebenen mit fehlender Spiegelsymmetrie führen zu starken piezoelektrischen Feldern. Dies hat eine Lumineszenz mit ausgeprägter linearer Polarisation zur Folge hat. Diese Eigenschaft wurde mittels statistischen Untersuchungen näher betrachtet. Zusätzlich erlaubten Messungen in Abhängigkeit der Anregungsleistung die verschiedenen Exziton-Zustände eines QP zu identifizieren. Zudem wurde die Emission einzelner Photonen durch InGaN QP demonstriert, erstmals sogar bis zu einer Temperatur von 50 K.
Im abschliessenden Kapitel wird eine mögliche Anwendung von QP präsentiert, bei der Eigenschaften in Bauteilen gezielt ausgenutzt werden, um die Bandbreite der Photonenabsorption zu erhöhen. Das Konzept der Zwischenband-Solarzellen verspricht auch Photonen mit einer Energie kleiner der Bandlücke des umgebenden Materials aufnehmen zu können und somit den spektralen Absorptionsbereich zu erweitern. Für eine systematische Untersuchung wurden verschiedene Proben mit integrierten AlGaInAs QP hergestellt. Anhand der Strom-Spannungs-Kennlinien der jeweiligen Proben im Dunkeln und unter Beleuchtung konnten wichtige Solarzellenparameter bestimmt werden. Spektrale Messungen liefern Informationen über die externe Quanteneffizienz der Proben. Entscheidend für den experimentellen Nachweis des Funktionsprinzips der Zwischenband-Solarzellen ist die Messung der Zwei-Photonen-Absorption für zwei Photonen mit jeweils kleineren Energien als der Bandlücke des umgebenden Materials.
The focus of this work is studying recombination mechanisms occurring in organic solar cells, as well as their impact on one of their most important parameters — the open circuit voltage Voc.
Firstly, the relationship between Voc and the respective charge carrier density n in the active layer under open circuit conditions is analyzed. Therefor, a model after Shockley for the open circuit voltage is used, whose validity is proven with the aid of fits to the measured data. Thereby, it is emphasized that the equation is only valid under special conditions. In the used reference system P3HT:PC61BM the fits are in agreement with the measurement data only in the range of high temperatures (150 - 300 K), where Voc increases linearly with decreasing temperature. At lower temperatures (50 – 150 K), the experiment shows a saturation of Voc. This saturation cannot be explained with the model by the measured falling charge carrier density with decreasing temperatures. In this temperature range Voc is not directly related to the intrinsic properties of the active layer. Voc saturation is due to injection energy barriers at the contacts, which is ascertained by macroscopic simulations. Furthermore, it is observed that Voc in the case of saturation is equivalent to the so-called built-in potential. The difference between the built-in potential and the energy gap corresponds thereby to the sum of the energy barriers at both contacts.
With the knowledge of the Voc(n) dependency for not contact limited solar cells, it is possible to investigate the recombination mechanisms of charge carriers in the active layer. For Langevin recombination the recombination rate is Rn2 (recombination order RO = 2), for Shockley-Read-Hall (SRH) Rn1 (RO=1); in various publications RO higher than two is reported with two main explanations.
1: Trap states for charge carriers exist in the respective separated phases, i.e. electrons in the acceptor phase and holes in the donor phase, which leads to a delayed recombination of the charge carriers at the interface of both phases and finally to an apparent recombination order higher than 2.
2: The enhanced R(n) dependency is attributed to the so called recombination prefactor, which again is dependent from n dependent mobility µ.
It is shown that for the system P3HT:PC61BM at room temperature the µ(n) dependency does nearly completely explain the higher RO but not at lower temperatures which in this case supports the first explanation. In the material system PTB7:PC71BM the increased RO cannot be explained by the µ(n) dependency even at room temperature.
To support the importance of trap states in combination with a phase separation for the explanation of the enhanced RO, additional trap states were incorporated in the solar cells to investigate their influence on the recombination mechanisms. To achieve this, P3HT:PC61BM solar cells were exposed to synthetic air (in the dark and under illumination) or TCNQ was added in small concentrations to the active layer which act as electron traps. For the oxygen degraded solar cell the recombination order is determined by a combination of open Voc-transients and Voc(n) measurements. Thereby, a continuous increase of the recombination order from 2.4 to more than 5 is observed with higher degradation times. By the evaluation of the ideality factor it can be shown that the impact of SRH recombination is increasing with higher trap concentration in relation to Langevin recombination. A similar picture is revealed for solar cells with TCNQ as extrinsic trap states.
Finally, a phenomenon called s-shaped IV-curves is investigated, which can sometimes occur for solar cells under illumination. As course of this a reduced surface recombination velocity can be found. Experimentally, the solar cells were fabricated using a special plasma treatment of the ITO contact. The measured IV-curves of such solar cells are reproduced by macroscopic simulations, where the surface recombination velocity is reduced. Hereby, it has to be distinguished between the surface recombination of majority and minority charge carriers at the respective contacts. The theory can be experimentally confirmed by illumination level dependent IV-curves as well as short circuit current density and open circuit voltage transients.