Filtern
Volltext vorhanden
- ja (19)
Gehört zur Bibliographie
- ja (19)
Erscheinungsjahr
- 2017 (19) (entfernen)
Dokumenttyp
Schlagworte
- boron (5)
- borylation (3)
- Boron (2)
- diborene (2)
- diborenes (2)
- 3-coordinate boron (1)
- Addukt (1)
- Alkine (1)
- Antibacterial therapy (1)
- Antibacterials (1)
Institut
- Institut für Anorganische Chemie (19) (entfernen)
Sonstige beteiligte Institutionen
ResearcherID
- D-3057-2014 (1)
EU-Projektnummer / Contract (GA) number
- 669054 (8)
Eu\(^{3+}\)-modified carbon dots (C-dots), 3–5 nm in diameter, were prepared, functionalized, and stabilized via a one-pot polyol synthesis. The role of Eu\(^{2+}\)/Eu\(^{3+}\), the influence of O\(_2\) (oxidation) and H\(_2\)O (hydrolysis), as well as the impact of the heating procedure (conventional resistance heating and microwave (MW) heating) were explored. With the reducing conditions of the polyol at the elevated temperature of synthesis (200–230 °C), first of all, Eu\(^{2+}\) was obtained resulting in the blue emission of the C-dots. Subsequent to O\(_2\)-driven oxidation, Eu\(^{3+}\)-modified, red-emitting C-dots were realized. However, the Eu\(^{3+}\) emission is rapidly quenched by water for C-dots prepared via conventional resistance heating. In contrast to the hydroxyl functionalization of conventionally-heated C-dots, MW-heating results in a carboxylate functionalization of the C-dots. Carboxylate-coordinated Eu\(^{3+}\), however, turned out as highly stable even in water. Based on this fundamental understanding of synthesis and material, in sum, a one-pot polyol approach is established that results in H\(_2\)O-dispersable C-dots with intense red Eu\(^{3+}\)-line-type emission.
Antimicrobial resistance is a growing global concern in human and veterinary medicine, with an ever-increasing void in the arsenal of clinicians. Novel classes of compounds including carbon monoxoide-releasing molecules (CORMs), for example the light-activated metal complex [Mn(CO)\(_3\)(tpa-\(\kappa^{3}N\))]Br, could be used as alternatives/to supplement traditional antibacterials. Avian pathogenic \(Escherichia\) \(coli\) (APEC) represent a large reservoir of antibiotic resistance and can cause serious clinical disease in poultry, with potential as zoonotic pathogens, due to shared serotypes and virulence factors with human pathogenic \(E.\) \(coli\). The \(in\) \(vitro\) activity of [Mn(CO)\(_3\)(tpa-\(\kappa^{3}N\))]Br against multidrug-resistant APECs was assessed via broth microtitre dilution assays and synergy testing with colistin performed using checkerboard and time-kill assays. \(In\) \(vivo\) antibacterial activity of [Mn(CO)\(_3\)(tpa-\(\kappa^{3}N\))]Br alone and in combination with colistin was determined using the \(Galleria\) \(mellonella\) wax moth larvae model. Animals were monitored for life/death, melanisation and bacterial numbers enumerated from larval haemolymph. \(In\) \(vitro\) testing produced relatively high [Mn(CO)\(_3\)(tpa-\(\kappa^{3}N\))]Br minimum inhibitory concentrations (MICs) of 1024 mg/L. However, its activity was significantly increased with the addition of colistin, bringing MICs down to \(\geq\)32 mg/L. This synergy was confirmed in time-kill assays. \(In\) \(vivo\) assays showed that the combination of [Mn(CO)\(_3\)(tpa-\(\kappa^{3}N\))]Br with colistin produced superior bacterial killing and significantly increased larval survival. In both \(in\) \(vitro\) and \(in\) \(vivo\) assays light activation was not required for antibacterial activity. This data supports further evaluation of [Mn(CO)\(_3\)(tpa-\(\kappa^{3}N\))]Br as a potential agent for treatment of systemic infections in humans and animals, when used with permeabilising agents such as colistin.
[60]Fullerene hexakisadducts possessing 12 carboxylic acid side chains form crystalline hydrogen-bonding frameworks in the solid state. Depending on the length of the linker between the reactive sites and the malonate units, the distance of the [60]fullerene nodes and thereby the spacing of the frameworks can be controlled and for the most elongated derivative, continuous channels are obtained within the structure. Stability, structural integrity and porosity of the material were investigated by powder X-ray diffraction, thermogravimetry and sorption measurements.
The empty p\(_z\)-orbital of a three-coordinate organoboron compound leads to its electron-deficient properties, which make it an excellent π-acceptor in conjugated organic chromophores. The empty p-orbital in such Lewis acids can be attacked by nucleophiles, so bulky groups are often employed to provide air-stable materials. However, many of these can still bind fluoride and cyanide anions leading to applications as anion-selective sensors. One electron reduction generates radical anions. The π-acceptor strength can be easily tuned by varying the organic substituents. Many of these compounds show strong two-photon absorption (TPA) and two-photon excited fluorescence (TPEF) behaviour, which can be applied for e.g. biological imaging. Furthermore, these chromophores can be used as emitters and electron transporters in OLEDs, and examples have recently been found to exhibit efficient thermally activated delayed fluorescence (TADF). The three-coordinate organoboron unit can also be incorporated into polycyclic aromatic hydrocarbons. Such boron-doped compounds exhibit very interesting properties, distinct from their all-carbon analogues. Significant developments have been made in all of these areas in recent years and new applications are rapidly emerging for this class of boron compounds.
The potassium salt of the boron-centred nucleophile B(CN)\(_{3}\)\(^{2-}\)(1) readily reacts with perfluorinated arenes, such as hexafluorobenzene, decafluorobiphenyl, octafluoronaphthalene and pentafluoropyridine, which results in KF and the K\(^{+}\) salts of the respective borate anions with one {B(CN)\(_{3}\)} unit bonded to the (hetero)arene. An excess of K\(_{2}\)1 leads to the successive reaction of two or, in the case of perfluoropyridine, even three C–F moieties and the formation of di- and trianions, respectively. Moreover, all of the 11 partially fluorinated benzene derivatives, C\(_{6}\)F\(_{6-n}\)H\(_{n}\) (n = 1–5), generally react with K\(_{2}\)1 to give new tricyano(phenyl)borate anions with high chemo- and regioselectivity. A decreasing number of fluorine substituents on benzene results in a decrease in the reaction rate. In the cases of partially fluorinated benzenes, the addition of LiCl is advantageous or even necessary to facilitate the reaction. Also, pentafluorobenzenes R–C\(_{6}\)F\(_{5}\) (R = –CN, –OMe, –Me, or –CF\(_{3}\)) react via C–F/C–B exchange that mostly occurs in the para position and to a lesser extent in the meta or ortho positions. Most of the reactions proceed via an S\(_{N}\)Ar mechanism. The reaction of 1,4-F\(_{2}\)C\(_{6}\)H\(_{4}\) with K\(_{2}\)1 shows that an aryne mechanism has to be considered in some cases as well. In summary, a wealth of new stable tricyano(aryl)borates have been synthesised and fully characterized using multi-NMR spectroscopy and most of them were characterised using single-crystal X-ray diffraction.
The reaction of [(cAAC\(^{Me}\))BH\(_{3}\)] (cAAC\(^{Me}\) = 1-(2,6-iPr\(_{2}\)C\(_{6}\)H\(_{3}\))-3,3,5,5-tetramethylpyrrolidin-2-ylidene) with a range of organolithium compounds led to the exclusive formation of the corresponding (dihydro)organoborates, Li\(^{+}\)[(cAAC\(^{Me}\)H)BH\(_{2}\)R]− (R = sp\(^{3}\)-, sp\(^{2}\)-, or sp-hybridised organic substituent), by migration of one boron-bound hydrogen atom to the adjacent carbene carbon of the cAAC ligand. A subsequent deprotonation/salt metathesis reaction with Me3SiCl or spontaneous LiH elimination yielded the neutral cAAC-supported mono(organo)boranes, [(cAAC\(^{Me}\)H)BH\(_{2}\)R]− (R]. Similarly the reaction of [cAAC\(^{Me}\))BH\(_{3}\)] with a neutral donor base L resulted in adduct formation by shuttling one boron-bound hydrogen to the cAAC ligand, to generate [(cAAC\(^{Me}\)H)BH\(_{2}\)L], either irreversibly (L = cAAC\(^{Me}\)) or reversibly (L = pyridine). Variable-temperature NMR data and DFT calculations on [(cAAC\(^{Me}\)H)BH\(_{2}\)(cAAC\(^{Me}\))] show that the hydrogen on the former carbene carbon atom exchanges rapidly with the boron-bound hydrides.
A series of NHC-supported 1,2-dithienyldiborenes was synthesized from the corresponding (dihalo)thienylborane NHC precursors. NMR and UV-vis spectroscopic data, as well as X-ray crystallographic analyses, were used to assess the electronic and steric influences on the B=B double bond of various NHCs and electron-donating substituents on the thienyl ligands. Crystallographic data showed that the degree of coplanarity of the diborene core and thienyl groups is highly dependent on the sterics of the substituents. Furthermore, any increase in the electron- donating ability of the substituents resulted in the destabilization of the HOMO and greater instability of the resulting diborenes.
Die Arbeit umfasst zum einen Untersuchungen zu hochhalogenierten 1-Aminocarba-closo-dodecaboraten, zum anderen Untersuchungen zu hochfluorierten Aminocarba-closo-dodecaboraten mit einer an ein Boratom gebundenen Amino-Funktion. Außerdem wurden im diesem Zuge closo-Undecaborat-Cluster untersucht, da diese als interessante Ausgangsverbindungen für funktionalisierte {CB11}-Derivate eingesetzt werden können.
Upon complexation to CuOTf, a PMe\(_3\)-stabilized bis(9-anthryl) diborene slowly undergoes an intramolecular hydroarylation reaction at room temperature. Subsequent triflation of the B–H bond with CuOTf, followed by a PMe\(_3\) transfer, finally yields a cyclic sp\(^2\)-sp\(^3\) boryl-substituted boronium triflate salt.
Under a CO atmosphere the dihydrodiborene [(cAAC)HB=BH(cAAC)] underwent coordination of CO concomitant with reversible hydrogen migration from boron to the carbene carbon atom, as well as reversible CO insertion into the B=B bond. Heating of the CO-adduct resulted in two unusual cAAC ring-expansion products, one presenting a B=C bond to a six-membered 1,2-azaborinane-3-ylidene, the other an unprecedented nine-membered cyclic alkyne resulting from reductive cleavage of CO and spontaneous C≡C triple bond formation.
Despite the prevalence of stable π-complexes of most d\(^{10}\) metals, such as Cu(I) and Ni(0), with ethylene and other olefins, complexation of d\(^{10}\) Zn(II) to simple olefins is too weak to form isolable complexes due to the metal ion's limited capacity for π-backdonation. By employing more strongly donating π- ligands, namely neutral diborenes with a high-lying π(B=B) or- bital, monomeric 16-electron M(II)-diborene (M = Zn, Cd) π- complexes were synthesized in good yields. Metal–B2 π- interactions in both the solid and solution state were confirmed by single-crystal X-ray analyses and their solution NMR and UV-vis absorption spectroscopy, respectively. The M(II) centers adopt a trigonal planar geometry and interact almost symmetrically with both boron atoms. The MB2 planes significantly twist out of the MX\(_2\) planes about the M-centroid(B–B) vector, with angles rang- ing from 47.0° to 85.5°, depending on the steric interactions be- tween the diborene ligand and the MX\(_2\) fragment.
Dihalodiboranes(4) react with an N-heterocyclic silylene (NHSi) to generate NHSi-adducts of 1-aryl-2-silyl-1,2-diboraindanes as confirmed by X-ray crystallography, featuring the functionalization of both B–X (X = halogen) bonds and a C–H bond under mild conditions. Coordination of a third NHSi to the proposed 1,1-diaryl- 2,2-disilyldiborane(4) intermediates, generated by a two-fold B–X insertion, may be crucial for the C–H borylation that leads to the final products. Notably, our results demonstrate the first C–H borylation with a strong B–F bond activated by silylene insertion.
Simple Solution-Phase Syntheses of Tetrahalodiboranes(4) and their Labile Dimethylsulfide Adducts
(2017)
Convenient, solution-phase syntheses of tetrahalodiboranes(4) B\(_2\)F\(_4\), B\(_2\)Cl\(_4\) and B\(_2\)I\(_4\) are presented herein from common precursor B\(_2\)Br\(_4\). In addition, the dimethylsulfide adducts B\(_2\)Cl\(_4\)(SMe\(_2\))\(_2\) and B\(_2\)Br\(_4\)(SMe\(_2\))\(_2\) are conveniently prepared in one-step syntheses from the commercially-available starting material B\(_2\)(NMe\(_2\))\(_4\). The results provide simple access to the full range of tetrahalodiboranes(4) for the exploration of their untapped synthetic potential.
Neuerungen in Bildungssystemen können nur erfolgreich sein, wenn sie planmäßig implementiert werden. Maßgeblich ist hierfür, dass die Lehrkräfte über die entsprechenden professionellen Kompetenzen verfügen. Die vorliegende Arbeit untersucht diesen Zusammenhang am Beispiel der Implementation von Seminarfächern im bayerischem Gymnasium. Es wird identifiziert, welche neuen Herausforderungen Chemie-Lehrkräfte mit Einführung der Wissenschaftspropädeutischen (W-) und Projekt-Seminare (P-) bewältigen müssen. Aus Interviews mit Lehrkräften wurden per qualitativer Inhaltsanalyse nach Mayring die Anforderungen an das Professionswissen der Lehrkräfte identifiziert. Für die W-Seminare konnte dargestellt werden, dass eine erfolgreiche Wissenschaftspropädeutik häufig an fehlendem Fachwissen der Lehrkräfte zu Nature of Science Inquiry (NOSI) scheiterte. Analog fehlte den Lehrkräften in den P-Seminaren Fachwissen zu Projektmanagement, sodass sie dies weder umsetzten, noch erfolgreich vermitteln konnten. Um die Lehrkräfte bei der Bewältigung der Herausforderungen zu unterstützen, wurden vielfältige Möglichkeiten der Kooperation von Seminarfächern mit der Universität als externem Partner erprobt. Methodenwerkzeuge für eine systematische Wissenschaftspropädeutik wurden entwickelt und im Rahmen von Lehrerfortbildungen weitergegeben. Weiterhin wurde ein Lehr-Lern-Labor „Analyseverfahren der Chemie“ für W-Seminare konzipiert und wiederholt erfolgreich durchgeführt. Damit wurden Erkenntnisse der empirischen Studie in nachweislich praxistaugliche Konzepte umgesetzt, die die erfolgreiche Implementation der Seminarfächer unterstützen können.
Die regioselektive Funktionalisierung von Bio(makro)molekülen erfordert Reaktionen, die mit einem biologischen System weder interagieren noch interferieren. Bestimmte funktionelle Gruppen, wie Azide oder Alkine, sind unter physiologischen Bedingungen inert, kommen nicht in der Natur vor, lassen sich selektiv miteinander verknüpfen und sind nicht-toxisch gegenüber Zellen und Organismen. Für die Einführung metallbasierter Funktionalitäten in solche Zielstrukturen stellen Click-Reaktionen daher einen schnellen Zugang dar, wobei Reaktionen, die ohne Zusatz von Katalysator und bei Raumtemperatur ablaufen von besonderem Interesse sind. Das Ziel der vorliegenden Arbeit war es daher die „iClick“-Reaktion von Ruthenium-Azid-Komplexen der allgemeinen Formel [Ru(N3)(aren)(N-N)]+ mit bidentaten Stickstoffliganden sowie Rhodium-Azid-Komplexen der allgemeinen Formel [Rh(Cp*)(N3)(bpyR,R)]+ mit unterschiedlich substituierten 2,2‘-Bipyridin-Coliganden (R = OCH3, H, COOCH3) gegenüber elektronenarmen Alkinen zu untersuchen. Röntgenstrukturanalysen der resultierenden Triazolat-Komplexe sollten den Koordinationsmodus bestätigten, da die Produkte der Click-Reaktionen prinzipiell als zwei verschiedene Regioisomere auftreten können. Die [Rh(Cp*)(N3)(bpyR,R)]CF3SO3-Komplexe mit 2,2‘-Bipyridin (bpy), dem elektronenziehenden Ligand 4,4‘-Bis(methoxycarbonyl)-2,2′-bipyridin (bpyCOOCH3,COOCH3) sowie dem elektronenschiebenden Ligand 4,4’-Dimethoxy-2,2‘-bipyridin (bpyOCH3,OCH3) wurden aus den entsprechenden Rhodium-Chlorido-Komplexen durch Fällung des Halogenids mit Silbertrifluormethansulfonat und anschließender Umsetzung mit Natriumazid hergestellt. In Lösung waren diese Verbindungen jedoch nur begrenzt stabil, wobei der Komplex mit bpyOCH3,OCH3 am wenigsten empfindlich war, während [Rh(Cp*)(N3)(bpyCOOCH3,COOCH3)]CF3SO3 aufgrund der sehr schnellen Zersetzung nicht isoliert werden konnte. Die „iClick“-Reaktion der Rhodium-Azid-Komplexe mit 4,4,4-Trifluorobut-2-insäureethylester ergab dann aber die stabilen Triazolat-Komplexe [Rh(Cp*)(triazolatCF3,COOEt)(bpyR,R)]CF3SO3 in sehr guter Ausbeute. Die Ruthenium-Azid-Komplexe [Ru(N3)(N-N)(pcym)]PF6 mit N-N = bpy, bpyCOOCH3,COOCH3, bpyOCH3,OCH3, Bipyrimidin (bpym) sowie Dipyrido[3,2a:2',3'c]phenazin (dppz) wurden ausgehend von den jeweiligen Ruthenium-Chlorido-Komplexen durch Fällung des Halogenid-Liganden mit Silbertrifluormethansulfonat und anschließender Umsetzung mit Natriumazid in guter bis moderater Ausbeute hergestellt. Um den Einfluss des Aren-Liganden zu untersuchen wurde außerdem der entsprechende Hexamethylbenzol-Komplex [Ru(N3)(bpy)(hmb)]CF3SO3 in moderater Ausbeute hergestellt. Alle [Ru(N3)(aren)(N-N)]X-Komplexe mit X = PF6- oder CF3SO3- wurden mittels 1H, 13C NMR- und IR-Spektroskopie, CHN-Analyse sowie ESI-Massenspektrometrie charakterisiert. Die „iClick“-Reaktion dieser Komplexe erfolgte mit 4,4,4-Trifluorobut-2-insäureethylester und teilweise auch mit Dimethylacetylendicaboxylat (DMAD) in sehr guter bis guter Ausbeute. Außerdem konnten für die Röntgenstrukturanalyse taugliche Einkristalle von [Ru(triazolatCF3,COOEt)(bpy)(hmb)]CF3SO3 und [Ru(triazolatCF3,COOEt)(bpyCOOCH3,COOCH3)(pcym)]PF6 erhalten werden, die die N2-Koordination des Triazolat-Liganden an das Zentralatom bestätigten. Um diese als metallbasierte Marker einsetzen zu können, müssen die resultierenden Triazolat-Komplexe bei biologisch relevanten pH-Werten und gegenüber Ligandenaustausch, zum Beispiel mit den Aminosäureseitenketten von Proteinen, stabil sein. Durch HPLC-Untersuchungen an [Ru(triazolatCF3,COOEt)(bpy)(hmb)]CF3SO3 wurde gezeigt, dass dieser Komplex in wässriger Lösung über einen pH-Bereich von 1 bis 8 bei Raumtemperatur mindestens 24 h stabil ist. Außerdem konnte eine weitgehende Stabilität gegenüber Ligandenaustausch mit den Seitenketten der Aminosäuren LCystein, L-Histidin, LMethionin und L-Glutaminsäure bei 37 °C über mindestens 72 h festgestellt werden. Insbesondere die Geschwindigkeit der „iClick“-Reaktion ist in einem biologischen Kontext von Bedeutung, da die Konjugationsreaktionen schneller ablaufen müssen als interessierende biologische Prozesse. Mittels HPLC und IR-Spektroskopie wurde für die „iClick“-Reaktion der Rutheniumazid-Komplexe [Ru(N3)(bpyR,R)(p-cym)]PF6 mit R = OCH3, H oder COOCH3 sowie [Ru(N3)(bpy)(hmb)]CF3SO3 mit einem Überschuss an 4,4,4-Trifluorobut-2-insäureethylester Geschwindigkeitskonstanten pseudoerster Ordnung im Bereich von 1 3*10-3 s-1 bestimmt. Außerdem war es mittels IR-Spektroskopie in Lösung möglich die Geschwindigkeits-konstante pseudoerster Ordnung für die „iClick“-Reaktion der Rhodiumazid-Verbindungen [Rh(Cp*)(N3)(bpyR,R)]CF3SO3 mit R = OCH3, H oder COOCH3 und 4,4,4-Trifluorobut-2-insäureethylester zu 2 4*10-3 s-1 zu ermitteln. Insgesamt zeigte sich, dass Komplexe mit elektronenreichen Coliganden schneller mit 4,4,4-Trifluorobut-2-insäureethylester reagieren als solche mit elektronenärmeren Liganden. Auch war die Geschwindigkeitskonstante für die Reaktion der Rhodium-Komplexe höher als für die Rutheniumverbindungen. Die Geschwindigkeitskonstanten zweiter Ordnung wurden aus der 19F NMR-spektroskopischen Untersuchung der Reaktion von 4,4,4-Trifluorobut-2-insäureethylester und [Ru(N3)(bpyR,R) (p-cym)]PF6 mit R = OCH3, H oder COOCH3 sowie [Ru(N3)(bpy)(hmb)]CF3SO3 bei 20 °C bestimmt. Bei annähernd gleichem Verhältnis von Alkin und Rutheniumazid-Komplexen wurden Geschwindigkeitskonstanten im Bereich von 1 - 2*10-2 L mol-1 s-1 erhalten. Diese sind größer als die der Staudinger-Ligation, aber kleiner als die der spannungsinduzierten Azid-Alkin Cycloaddition. Prinzipiell sollte damit also eine biologische Anwendung möglich sein. Außerdem wurde die Aktivierungsenergie der Reaktion von [Ru(N3)(bpy)(pcym)]PF6 mit 4,4,4-Trifluorobut-2-insäureethylester aus der Untersuchung der Temperaturabhängigkeit im Bereich von -20 °C bis +20 °C mit VT-NMR zu 46.1 kJ mol-1 bestimmt. In den 19F NMR-Spektren des Reaktionsgemisches zeigte sich bei -20 °C neben dem Signal des N2-koordinierten Triazolats außerdem ein weiteres, das dem N1-Isomer zuzuordnen ist, welches bei Erwärmen jedoch wieder verschwand. In einer DFT-Rechnung wurde die Geometrie von [Ru(N3)(bpy)(hmb)]CF3SO3 optimiert. Dabei zeigte sich, dass nur etwa 25 – 30% aller Trajektorien angreifender Alkinmolekülen einen Zugang zum Azid ermöglichen, sodass die Reaktionsgeschwindigkeit um etwa einen Faktor vier niedriger liegen sollte als für nicht oder nur wenig abgeschirmte Organoazid-Verbindungen. Die „iClick“-Reaktion der hier untersuchten Metall-Azid-Komplexe mit elektronenarmen Alkinen zeigt also bereits jetzt Reaktionsgeschwindigkeiten vergleichbar etablierter Biokonjugationsreaktionen. In Zukunft sollte daher das Potential anderer Metall-Azid-Bausteine untersucht und auch das Alkin variiert werden.
Anionic Adducts
Sp2-sp3 tetraalkoxy diboron compounds have gained attention due to the development of new, synthetically useful catalytic reactions either with or without transition-metals. Lewis-base adducts of the diboron(4) compounds were suggested as possible intermediates in Cu catalyzed borylation reactions some time ago. However, intermolecular adducts of tetraalkoxy diboron compounds have not been studied yet in great detail. In preliminary studies, we have synthesized a series of anionic sp2-sp3 adducts of B2pin2 with alkoxy-groups (L = [OMe]–, [OtBu]–), a phenoxy-group (L = [4-tBuC6H4O]–) and fluoride (L = [F]–, with [nBu4N]+ as the counter ion) as Lewis-bases.
Neutral Adducts
Since their isolation and characterization, applications of N-heterocyclic carbenes (NHCs) and related molecules, e.g., cyclic alkylaminocarbenes (CAACs) and acyclic diaminocarbenes (aDCs), have grown rapidly. Their use as ligands in homogeneous catalysis and directly in organocatalysis, including recently developed borylation reactions, is now well established. Recently, several examples of ring expansion reactions (RER) involving NHCs were reported to take place at elevated temperatures, involving Be, B, and Si.
Furthermore, preliminary studies in the group of Marder et al. showed the presence of neutral sp2-sp3 diboron compounds with B2pin2 and the NHC Cy2Im. In this work, we focused on the synthesis and characterization of further neutral sp2-sp3 as well as sp3-sp3 diboron adducts with B2cat2 and B2neop2 and different NHCs. Whereas the mono-NHC adduct is stable for several hours at temperatures up to 60 °C, the bis-NHC adducts undergo thermally induced rearrangement to form the ring expanded products compound 26 and 27. B2neop2 is much more reactive than B2cat2 giving ring expanded product 29 at room temperature in quantitative yields, demonstrating that NHC ring expansion and B–B bond cleavage can be very facile processes.
Whereas the mono-NHC adduct is stable for several hours at temperatures up to 60 °C, the bis-NHC adducts undergo thermally induced rearrangement to form the ring expanded products compound 26 and 27. B2neop2 is much more reactive than B2cat2 giving ring expanded product 29 at room temperature in quantitative yields, demonstrating that NHC ring expansion and B–B bond cleavage can be very facile processes.
The diborene 1 was synthesized by reduction of a mixture of 1,2-di-9-anthryl-1,2-dibromodiborane(4) (6) and trimethylphosphine with potassium graphite. The X-ray structure of 1 shows the two anthryl rings to be parallel and their π(C\(_{14}\)) systems perpendicular to the diborene π(B=B) system. This twisted conformation allows for intercalation of the relatively high-lying π(B=B) orbital and the low-lying π* orbital of the anthryl moiety with no significant conjugation, resulting in a small HOMO-LUMO gap (HLG) and ultimately an unprecedented anthryl B–B bond hydroarylation. The HLG of 1 was estimated to be 1.57 eV from the onset of the long wavelength band in its UV–vis absorption spectrum (THF, λ\(_{onset}\) = 788 nm). The oxidation of 1 with elemental selenium afforded diboraselenirane 8 in quantitative yield. By oxidative abstraction of one phosphine ligand by another equivalent of elemental selenium, the B–B and C\(^1\)–H bonds of 8 were cleaved to give the cyclic 1,9-diboraanthracene 9.
In der Arbeit wurden die Strukturen, Reaktivitäten und die Photophysik von verschiedenen Kupfer(I)-Komplexen untersucht. Dazu wurden zunächst Kupfer(I)-Halogenid und -Pseudohalogenid Verbindungen der Typen [CuX] und [Cu2I2] mit Phenanthrolin und dessen Derivaten sowohl strukturell als auch photophysikalisch detailliert charakterisiert. Diese Verbindungen weisen eine breite XMLCT-Absorption zwischen 450-600 nm und Emissionsbanden zwischen 550-850 nm im Festkörper auf. Es zeigte sich für diese strukturell einfachen Verbindungen ein komplexes und sehr unterschiedliches photophysikalisches Verhalten. Dabei wurde neben strukturellen Parametern, wie z.B. π-Wechselwirkungen, auch der Einfluss des Halogen bzw. Pseudohalogenatoms untersucht. Es konnte gezeigt werden, dass mindestens zwei angeregte Zustände an der Emission von [CuI(dtbphen)] (16) und [CuBr(dtbphen)] (17) im Feststoff beteiligt sind und es wurden mögliche Mechanismen wie TADF und die Beteiligung von zwei Triplett Zuständen diskutiert. Die Glasmatrixmessungen von 17 in 2-Methyltetrahydrofuran wie auch die temperaturabhängigen Messungen von [Cu2(µ2-I)2(dmphen)2] (21) zeigen im Gegensatz dazu keinen Hinweis auf TADF. In der Summe zeichnet sich ein komplexes photophysikalisches Bild dieser Komplexe, in der neben molekularen Parametern auch Festkörpereffekte eine wichtige Rolle spielen und die eine einfache Zuordnung zu einem bestimmten Mechanismus schwierig machen.
Neuartige Verbindungen mit einem Cuban-Strukturmotiv [L4Cu4X4] (X = Br (32) und Cl (33)), die von einem Phosphininliganden (L = 2,4-Diphenyl-5-methyl-6-(2,3-dimethylphenyl)-phosphinin, 31) koordiniert sind, wurden in einer weiteren Studie photophysikalisch untersucht. Im Gegensatz zu anderen Schweratomkomplexen des Phosphinins, wie z.B. [Ir(C^P)3] (mit C^P = cyclometalliertes 2,4,6-Triphenylphosphinin) zeigen die Cu(I)-Verbindungen bereits bei Raumtemperatur eine intensive Phosphoreszenz. Die LE-Emission kann auf der Grundlage von DFT-Rechnungen einem 3XMLCT Zustand zugeordnet werden. Im Kontrast zu strukturanalogen Pyridin Komplexen ist kein clusterzentrierter 3CC Übergang festzustellen, sondern eine schwache HE-Emissionsbande ist mit großer Wahrscheinlichkeit der Restfluoreszenz des Phosphininliganden 31 geschuldet.
Eine weitere Ligandenmodifikation wurde mit der Einführung von NHCs als starke σ-Donor Liganden erreicht.
Einerseits wurde die Photophysik von [Cu2Cl2(NHC^Pic)2]-Systemen (mit NHC^Pic = N-Aryl-N'-(2-picolyl) imidazolin 2 yliden) untersucht, die einen Hybridliganden mit Picolyl- und NHC Funktionalität beinhalten. Es konnte gezeigt werden, dass diese Verknüpfung eines starken σ-Donoren und eines π*-Akzeptors zu hohen Quantenausbeuten von bis zu 70% führen kann, wenn zusätzlich auch dispersive Cu-Cu-Wechselwirkungen vorhanden sind. Die Effizienz der Emission kann sich bei Anwesenheit dieser dispersiven Interaktionen im Gegensatz zu Systemen ohne kurze Cu-Cu-Abstände um den Faktor zwei erhöhen. Dinukleare Strukturen von Typ [Cu2Cl2(IMesPicR)2] wurden für die Komplexe 41-44 gefunden, die einen Donor-Substituenten in der para-Position der Picolyl-Funktionalität tragen. Für eine Nitro-Gruppe in der 4-Postion konnte der mononukleare Komplex [CuCl(IMesPicR)] (45) isoliert werden. Ferner können die Substituenten am NHC ebenfalls die Strukturen im Festkörper beeinflussen. So kann für 46 eine polymere Struktur [CuCl(IDippPic)]∞ festgestellt werden. Die Emission in diesen Systemen ist mit einer Elektronenumverteilung aus der Pyridin- und Carbenfunktionalität in das Kupfer- bzw. Chloridatom (LMXCT-Übergang) verbunden. Dabei zeigen die Komplexe [Cu2Cl2(IMesPicH)2] (41), [Cu2Cl2(IMesPicMe)2] (42) und [Cu2Cl2(IMesPicCl)2] (43) zusätzlich Anzeichen von TADF.
Zum anderem sind NHC Liganden und dispersive Cu-Cu-Wechselwirkungen Gegenstand einer weiteren strukturellen und photophysikalischen Studie. In dieser wurden die Cu-Cu-Abstände in dinuklearen Kupfer(I)-Bis-NHC-Komplexen [Cu2(tBuIm2(R^R))2](PF6)2 (50-52) durch die Einführung von Methylen, Ethylen und Propylenbrückeneinheiten systematisch variiert. Die erhaltenen Komplexe wurden strukturell und photophysikalisch mit einem mononuklearen Komplex [Cu(tBu2Im)2](PF6) (53) verglichen. Dadurch konnte der Einfluss von kurzen Cu-Cu-Abständen auf die Emissionseigenschaften gezeigt werden, auch wenn der genaue Ursprung einer ebenfalls beobachteten Mechanochromie noch nicht gänzlich aufgeklärt ist. Möglich ist die Existenz verschiedener Konformere in den Pulverproben (Polymorphie), die das Entstehen niederenergetischer Banden in der zerriebenen, amorphen Pulverprobe von [Cu2(tBuIm2(C3H6))2](PF6)2 (52), aber auch die duale Emissionen von [Cu2(tBuIm2(CH2))2](PF6)2 (50) und [Cu2(tBuIm2(C2H4))2](PF6)2 (51) erklären könnten. Die hochenergetische Bande kann für alle Komplexe aufgrund von DFT-und TD-DFT-Rechnungen, 3LMCT Zuständen zugeordnet werden, während niederenergetische Emissionsbanden immer dann zu erwarten sind, wenn 3MC-Zustände populiert werden können, bzw. wenn dispersive Cu-Cu-Wechselwirkungen möglich sind. Der letzte Beweis steht jedoch mit der Isolation anderer polymorpher Phasen und derer photophysikalischen Charakterisierung noch aus.
Im letzten Teil dieser Arbeit wurde gezeigt, wie die Deformations und Interaktionsenergie das Koordinationsverhalten und die Reaktivität von d10 [M(NHC)n]-Komplexen beeinflussen können. Hierzu wurden die Bildung von d10-[M(NHC)n]-Komplexen (n = 1-4; mit M = Co-, Rh-, Ir-, Ni, Pd, Pt, Cu+, Ag+, Au+, Zn2+, Cd2+ and Hg2+) in der Gasphase und in polarer Lösung (DMSO) auf DFT-D3(BJ)-ZORA-BLYP/TZ2P-Niveau berechnet und die Bindungssituation der Metall-Carben-Bindung analysiert. Dabei zeigt sich, dass dikoordinierte Komplexe [M(NHC)2] für alle d10-Metalle thermodynamisch stabile Spezies darstellen, jedoch jede weitere höhere Koordination stark vom Metall bzw. von der Deformationsenergie abhängen. Hier konnte auf Grundlage einer quantitativen Kohn Sham-Molekülorbitalbetrachtung die Ursache für die unterschiedlich hohen Werte der Deformationsenergie (ΔEdef) in den NHC‒M‒NHC-Fragmenten aufgeklärt werden. Hohe Werte sind auf ein effektives sd-Mischen bzw. auf das σ-Bindungsgerüsts zurückzuführen, während niedrige bzw. negative Werte von ΔEdef mit einem signifikanten π-Rückbindungsanteil assoziiert sind. Zudem ist ein hoher elektrostatischer Anteil in der Interaktionsenergie ein wichtiger Faktor. So können trotz hoher berechneter Werte für die Deformationsenergien der Gruppe 12 (Zn(II), Cd(II) und Hg(II)), tetrakoordinierte Komplexe der Form [M(NHC)4] hohe thermodynamische Stabilität aufweisen. Diese allgemeinen Beobachtungen sollten nicht auf den NHC-Liganden beschränkt sein, und sind deswegen für Synthesen und Katalysezyklen von Bedeutung, in denen d10-MLn (n = 1-4) Komplexe Anwendung finden.
Recent years have seen rapid advances in the chemistry of small molecules containing electron-precise boron-boron bonds. This review provides an overview of the latest methods for the controlled synthesis of B–B single and multiple bonds as well as the ever-expanding range of reactivity displayed by the latter.