Refine
Has Fulltext
- yes (15)
Is part of the Bibliography
- yes (15)
Document Type
- Doctoral Thesis (15)
Keywords
- Kleinsatellit (6)
- Low Earth Orbit (2)
- Mensch-Maschine-Schnittstelle (2)
- Plasmaantrieb (2)
- Robotik (2)
- Satellit (2)
- Sensor (2)
- 3D Sensor (1)
- 3D Vision (1)
- 6DOF Pose Estimation (1)
Institute
Sonstige beteiligte Institutionen
EU-Project number / Contract (GA) number
- 320377 (1)
Ongoing changes in spaceflight – continuing miniaturization, declining costs of rocket launches and satellite components, and improved satellite computing and control capabilities – are advancing Satellite Formation Flying (SFF) as a research and application area. SFF enables new applications that cannot be realized (or cannot be realized at a reasonable cost) with conventional single-satellite missions. In particular, distributed Earth observation applications such as photogrammetry and tomography or distributed space telescopes require precisely placed and controlled satellites in orbit.
Several enabling technologies are required for SFF, such as inter-satellite communication, precise attitude control, and in-orbit maneuverability. However, one of the most important requirements is a reliable distributed Guidance, Navigation and Control (GNC) strategy. This work addresses the issue of distributed GNC for SFF in 3D with a focus on Continuous Low-Thrust (CLT) propulsion satellites (e.g., with electric thrusters) and concentrates on circular low Earth orbits. However, the focus of this work is not only on control theory, but control is considered as part of the system engineering process of typical small satellite missions. Thus, common sensor and actuator systems are analyzed to derive their characteristics and their impacts on formation control. This serves as the basis for the design, implementation, and evaluation of the following control approaches: First, a Model Predictive Control (MPC) method with specific adaptations to SFF and its requirements and constraints; second, a distributed robust controller that combines consensus methods for distributed system control and $H_{\infty}$ robust control; and finally, a controller that uses plant inversion for control and combines it with a reference governor to steer the controller to the target on an optimal trajectory considering several constraints. The developed controllers are validated and compared based on extensive software simulations. Realistic 3D formation flight scenarios were taken from the Networked Pico-Satellite Distributed System Control (NetSat) cubesat formation flight mission. The three compared methods show different advantages and disadvantages in the different application scenarios. The distributed robust consensus-based controller for example lacks the ability to limit the maximum thrust, so it is not suitable for satellites with CLT. But both the MPC-based approach and the plant inversionbased controller are suitable for CLT SFF applications, while showing again distinct advantages and disadvantages in different scenarios.
The scientific contribution of this work may be summarized as the creation of novel and specific control approaches for the class of CLT SFF applications, which is still lacking methods withstanding the application in real space missions, as well as the scientific evaluation and comparison of the developed methods.
Dementia is a complex neurodegenerative syndrome that by 2050 could affect about 135 Million people worldwide. People with dementia experience a progressive decline in their cognitive abilities and have serious problems coping with activities of daily living, including
orientation and wayfinding tasks. They even experience difficulties in finding their way in a familiar environment. Being lost or fear of getting lost may consequently develop into other psychological deficits such as anxiety, suspicions, illusions, and aggression. Frequent results are social isolation and a reduced quality of life. Moreover, the lives of relatives and
caregivers of people with dementia are also negatively affected.
Regarding navigation and orientation, most existing approaches focus on outdoor environment and people with mild dementia, who have the capability to use mobile devices. However, Rasquin (2007) observe that even a device with three buttons may be too complicated for
people with moderate to severe dementia. In addition, people who are living in care homes mainly perform indoor activities. Given this background, we decided to focus on designing a system for indoor environments for people with moderate to severe dementia, who are unable
or reluctant to use smartphone technology.
Adopting user-centered design approach, context and requirements of people with dementia were gathered as a first step to understand needs and difficulties (especially in spatial disorientation and wayfinding problems) experienced in dementia care facilities. Then, an "Implicit Interactive Intelligent (III) Environment" for people with dementia was proposed emphasizing implicit interaction and natural interface. The backbone of this III Environment is based on supporting orientation and navigation tasks with three systems: a Monitoring system, an intelligent system, and a guiding system. The monitoring system and intelligent system automatically detect and interpret the locations and activities performed by the users i.e. people with dementia. This approach (implicit input) reduces cognitive workload as well as physical workload on the user to provide input. The intelligent system is also aware of context, predicts next situations (location, activity), and decides when to provide an appropriate service to the users. The guiding system with intuitive and dynamic environmental cues (lighting with color) has the responsibility for guiding the users to the places they need to be.
Overall, three types of a monitoring system with Ultra-Wideband and iBeacon technologies, different techniques and algorithms were implemented for different contexts of use.
They showed a high user acceptance with a reasonable price as well as decent accuracy and precision. In the intelligent system, models were built to recognize the users’ current activity, detect the erroneous activity, predict the next location and activity, and analyze the
history data, detect issues, notify them and suggest solutions to caregivers via visualized web interfaces. About the guiding systems, five studies were conducted to test and evaluate the effect of lighting with color on people with dementia. The results were promising. Although
several components of III Environment in general and three systems, in particular, are in place (implemented and tested separately), integrating them all together and employing this in the dementia context as a fully properly evaluation with formal stakeholders (people with
dementia and caregivers) are needed for the future step.
With the miniaturization of satellites a fundamental change took place in the space industry. Instead of single big monolithic satellites nowadays more and more systems are envisaged consisting of a number of small satellites to form cooperating systems in space. The lower costs for development and launch as well as the spatial distribution of these systems enable the implementation of new scientific missions and commercial services.
With this paradigm shift new challenges constantly emerge for satellite developers, particularly in the area of wireless communication systems and network protocols.
Satellites in low Earth orbits and ground stations form dynamic space-terrestrial networks. The characteristics of these networks differ fundamentally from those of other networks.
The resulting challenges with regard to communication system design, system analysis, packet forwarding, routing and medium access control as well as challenges concerning the reliability and efficiency of wireless communication links are addressed in this thesis.
The physical modeling of space-terrestrial networks is addressed by analyzing existing satellite systems and communication devices, by evaluating measurements and by implementing a simulator for space-terrestrial networks.
The resulting system and channel models were used as a basis for the prediction of the dynamic network topologies, link properties and channel interference. These predictions allowed for the implementation of efficient routing and medium access control schemes for space-terrestrial networks. Further, the implementation and utilization of software-defined ground stations is addressed, and a data upload scheme for the operation of small satellite formations is presented.
A complete simulation system is proposed that can be used as an educational tool by physicians in training basic skills of Minimally Invasive Vascular Interventions. In the first part, a surface model is developed to assemble arteries having a planar segmentation. It is based on Sweep Surfaces and can be extended to T- and Y-like bifurcations. A continuous force vector field is described, representing the interaction between the catheter and the surface. The computation time of the force field is almost unaffected when the resolution of the artery is increased.
The mechanical properties of arteries play an essential role in the study of the circulatory system dynamics, which has been becoming increasingly important in the treatment of cardiovascular diseases. In Virtual Reality Simulators, it is crucial to have a tissue model that responds in real time. In this work, the arteries are discretized by a two dimensional mesh and the nodes are connected by three kinds of linear springs. Three tissue layers (Intima, Media, Adventitia) are considered and, starting from the stretch-energy density, some of the elasticity tensor components are calculated. The physical model linearizes and homogenizes the material response, but it still contemplates the geometric nonlinearity. In general, if the arterial stretch varies by 1% or less, then the agreement between the linear and nonlinear models is trustworthy.
In the last part, the physical model of the wire proposed by Konings is improved. As a result, a simpler and more stable method is obtained to calculate the equilibrium configuration of the wire. In addition, a geometrical method is developed to perform relaxations. It is particularly useful when the wire is hindered in the physical method because of the boundary conditions. The physical and the geometrical methods are merged, resulting in efficient relaxations. Tests show that the shape of the virtual wire agrees with the experiment. The proposed algorithm allows real-time executions and the hardware to assemble the simulator has a low cost.
Dielektrische Elastomersensoren sind aus Elastomermaterialien aufgebaute Sensoren mit einem kapazitiven Messprinzip. In ihrer einfachsten Form bestehen sie aus einer dehnbaren Elastomerfolie als Dielektrikum, die beidseitig mit leitfähigen und ebenfalls dehnbaren Schichten als Elektroden bedeckt ist.
Damit entsteht ein mechanisch verformbarer elektrischer Kondensator, dessen Kapazität mit der Dehnung der Elastomerfolie stetig ansteigt. Neben solchen Dehnungssensoren lassen sich mit einem geeigneten geometrischen Aufbau auch dielektrische Elastomersensoren realisieren, bei denen eine elektrische Kapazität mit einem angelegten Druck bzw. einer Kraft auf die Oberfläche, mit einer Scherkraft oder mit der Annäherung eines elektrisch leitfähigen oder polarisierbaren Körpers wie z. B. der menschlichen Hand messbar ansteigt.
Durch ihre vielfältige Funktion, intrinsische Verformbarkeit und flächige Ausgestaltung weisen Dielektrische Elastomersensoren erhebliches Potential in der Schaffung smarter, sensitiver Oberflächen auf. Dabei sind weitgehende und individuelle Adaptionen auf den jeweiligen Anwendungszweck durch Abstimmung geometrischer, mechanischer und elektrischer Eigenschaften möglich. Die bisherige Forschung beschränkt sich jedoch auf die Analyse und Optimierung einzelner Aspekte ohne das Potential einer übergreifenden systemischen Perspektive zu nutzen.
Diese Arbeit widmet sich daher der Betrachtung der Sensorik als Gesamtsystem, sowohl horizontal - von abstrakten Modellen bis zur Fertigung und prototypischen Anwendung - als auch vertikal über die Komponenten Material, Struktur und Elektronik.
Hierbei wurden in mehreren Teilgebieten eigenständige neue Erkenntnisse und Verbesserungen erzielt, die anschließend in die übergreifende Betrachtung des Gesamtsystems integriert wurden. So wurden in den theoretischen Vorarbeiten neue Konzepte zur ortsaufgelösten Erfassung mehrerer physikalischer Größen und zur elektrischen und mechanischen Modellierung entwickelt. Die abgeleiteten Materialanforderungen wurden in eine tiefgehende Charakterisierung der verwendeten Elastomer-Kompositwerkstoffe überführt, in der neuartige analytische Methoden in Form von dynamischer elektromechanischer Testung und nanoskaliger Computertomographie zur Aufklärung der inneren Wechselwirkungen zum Einsatz kamen.
Im Bereich der automatisierten Prozessierung wurde ein für die komplexen mehrschichtigen Elektrodenstrukturen geeigneter neuer lasergestützer substraktiver Fertigungprozess etabliert, der zudem die Brücke zu elastischer Elektronik schlägt.
In der abschließenden Anwendungsevaluierung wurden mehrere ortsaufgelöste und multimodale Gesamtsysteme aufgebaut und geeignete Messelektronik und Software entwickelt. Abschließend wurden die Systeme mit einem eigens entwickelten robotischen Testsystem charakterisiert und zudem das Potential der Auswertung mittels maschinellem Lernen aufgezeigt.